MBQuart WR1-CD Operation and Installation Manual
Advertisement
Advertisement
Operation and Installation
Manual
OPEN
SETUP
EQ
SUB.W
S-MOD
IPOD MENU
MENU
VOL
MUTE
ENT
BND
VOL
LOUD
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
DIM
ASM
AUX
IN
WR1-CD
AM / FM Stereo Receiver with CD Player
Please carefully read all of the information in this manual. Familiarity with operation and installation procedures will help you obtain the best possible performance from your new AM/FM Stereo Receiver with CD
Player.
CAUTION! THIS MARINE CD PLAYER IS A CLASS
1 LASER PRODUCT. THIS UNIT USES A
VISIBLE/INVISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION IF EXPOSED
DIRECTLY. BE SURE TO OPERATE THE MOBILE CD
PLAYER AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PER-
FORMANCE OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. PLEASE REFER SERVICING TO A
QUALIFIED TECHNICIAN.
CHANGES OR MODIFICATIONS TO THIS PRODUCT
NOT APPROVED BY THE MANUFACTURER WILL
VOID THE WARRANTY AND WILL VIOLATE FCC
APPROVAL.
Button Locations and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Remote Control Button Locations and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AM/FM Radio Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Sound Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10
Disc Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CD Operation (Compact Disc). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13
MP3 Disc Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
CD Changer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Sirius Satellite Radio Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Sirius Satellite Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-20
IPOD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-22
AUX Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setup Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Input Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2
6
8 2
3
4
7
5 1
OPEN
SETUP
EQ
SUB.W
S-MOD
IPOD MENU
MENU
VOL
MU E
ENT
BND
LOUD
VOL
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
DIM
ASM
AUX
IN
10 20 18 2 19 18 17
25
16 15
24
14 13 12 21 9 22
23
11
1. Power On/Off and Display Dimmer: Press to turn the unit On or Off. Press and hold to dim the display. Press and hold again to restore display’s illumination.
2. Volume Control: Press the button to increase the volume, and press the button to decrease the volume.
VOL
VOL
3. CD Play/Pause and Mute Button:
CD and CD Changer Mode: Press to pause disc play, press again to resume play.
Radio, Sirius Satellite Radio and Auxiliary Audio Input Modes: Press to mute volume level. Press again to restore.
4. Enter/Band and Loud Button:
Radio: Press to select AM1, AM2, FM1, FM2 and FM3 radio bands.
Loudness: Press and hold button until “LOUD ON” appears in the display to boost high and low tones at low volume levels. To deactivate press and hold again until “LOUD OFF” appears in the display.
IPOD Mode: See "IPOD Operation" for more information.
5. Infrared Eye: Receives the signals from the optional remote control.
6. Open Button: Press to fold down the front panel to access the CD player slot and disc eject button.
7. Display Area: This area displays all function information for the radio, CD player, auxiliary audio and
IPOD modes.
8. Equalizer Button: Press to choose between preset sound equalization settings.
9. Display Button (DISP): Press to display information.
CD and CD Changer Mode: Press to display track information.
10. Setup Button: Press to access Bass, Treble, Balance, Fader and Subwoofer controls. Press and hold for 10 seconds to access Beep Confirmation, Default Volume and AM/FM Tuning System.
3
11. ASM Button (Automatic Station Memory):
Radio Mode: Press and hold for automatic station memory storing. Press and release for scanning memorized stations.
12. Multi-Function Button #6:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #6 (CH6).
Press and release when recalling preset radio station #6
13. Multi-Function Button #5:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #5 (CH5).
Press and release when recalling preset radio station #5.
CD Mode: Press to preview each track on the CD for 10 seconds. Press again to cancel.
CD Changer Mode: Press to preview each track on the CD for 10 seconds. Press and hold to preview each track on every loaded CD for 10 seconds. Press again to cancel.
14. Multi-Function Button #4:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #4 (CH4).
Press and release when recalling preset radio station #4.
CD Mode: Press to play all the tracks on the CD in random order. Press again to cancel.
CD Changer Mode: Press to play all the tracks on the CD in random order. Press and hold to play every loaded CD in random order. Press again to cancel.
15. Multi-Function Button #3:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #3 (CH3).
Press and release when recalling preset radio station #3.
CD Mode: Press to repeat a CD track. Press again to cancel.
CD Changer Mode: Press to repeat a CD track. Press and hold to repeat the entire disc. Press again to cancel.
16. Multi-Function Button #2:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #2 (CH2).
Press and release when recalling preset radio station #2.
CD Changer Mode: Push to change to a higher number disc in the CD changer.
17. Multi-Function Button #1:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #1 (CH1).
Press and release when recalling preset radio station #1.
CD Changer Mode: Push to change to a lower number disc in the CD changer.
18. Tune/Track Buttons:
Radio Mode: Press either button and the tuner will scan to the next strong station and stop. Then press and hold either button until “MANUAL” appears in the display, then release. Again, press either button until the desired radio station appears in the display.
CD and CD Changer Mode: Press to change the track to a lower or higher track.
19. Mode Button:
Press to change the play source: Radio, CD and Auxiliary Audio Input. Depending on what other input sources are connected (IPOD, Sirius and CD Changer) these play sources will also appear in the display.
20. Menu Button:
Sirius Mode: See "Sirius Satellite Radio Operation" for more information.
IPOD Mode: See "IPOD Operation" for more information.
21. Mono/Stereo Button: Changes FM radio reception from Mono to Stereo.
22. Audio Input Jack: Plug in a device with a 3.5mm audio/input plug. The WR1-CD will not control the device, it just allows the audio to be played through the system.
(See Auxiliary Input Operation, page 22, for more information).
23. Eject Button: Press to eject the loaded disc.
24. Disc Slot: To play a disc, insert a disc into the slot with the label facing up.
25. Power Indicator: Lights up when the unit has power.
4
1
19
18
20
17
16
12
DIM
MODE
S MOD
IPOD MENU
MENU
1
DIR / CAT
2
6
DVD
SETUP
TITLE
AUDIO
7
MUTE
SUB T
RPT
3
8
LOUD
ENT
BND
VOLUME
OK
SHF
4
9
DVD
MENU
SCN
5
0
1. Power On/Off and Display Dimmer: Press to turn the unit On or Off. Press and hold to dim the display. Press and hold again to restore.
2. Volume Control: Press the and buttons to increase and decrease the volume.
3. CD Play/Pause and Mute Button:
CD and CD Changer Mode: Press to pause disc play, press again to resume play.
Radio, Sirius Satellite Radio and Auxiliary
Audio Input Modes: Press to mute volume level.
4. Enter/Band and Loud Button:
Radio: Press to select AM1, AM2, FM1, FM2 and FM3 radio bands.
Loudness: Press and hold button until “LOUD
ON” appears in the display. To deactivate, press and hold again until “LOUD OFF” appears.
IPOD Mode: See "IPOD Operation" for more information.
12. Multi-Function Button #6:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #6
(CH6). Press and release when recalling preset radio station #6.
13. Multi-Function Button #5:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #5
(CH5). Press and release when recalling preset radio station #5.
CD Mode: Press to preview each track on the
CD for 10 seconds. Press again to cancel.
CD Changer Mode: Press to preview each track on the CD for 10 seconds. Press and hold to preview each track on every loaded
CD for 10 seconds. Press again to cancel.
3
2
4
18
2
13
14
15
14. Multi-Function Button #4:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #4
(CH4). Press and release when recalling preset radio station #4.
CD Mode: Press to play all the tracks on the
CD in random order. Press again to cancel.
CD Changer Mode: Press to play all the tracks on the CD in random order. Press and hold to play every loaded CD in random order. Press again to cancel.
15. Multi-Function Button #3:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #3
(CH3). Press and release when recalling preset radio station #3.
CD Mode: Press to repeat a CD track. Press again to cancel.
CD Changer Mode: Press to repeat a CD track.
Press and hold to repeat the entire disc. Press again to cancel.
16. Multi-Function Button #2:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #2
(CH2). Press and release when recalling preset radio station #2.
CD Changer Mode: Push to change to a higher number disc in the CD changer.
17. Multi-Function Button #1:
Radio Mode: Press and hold until a beep is heard to store a radio station into memory #1
(CH1). Press and release when recalling preset radio station #1.
CD Changer Mode: Push to change to a lower number disc in the CD changer.
18. Tune/Track Buttons:
Radio Mode: Press and the tuner will scan to the next strong station and stop. Press and hold until “MANUAL” appears in the display then release. Then press or until the desired radio station is tuned-in.
CD and CD Changer Mode: Press to change the track to a lower or higher track
19. Mode Button:
Press to change the play source: Radio, CD and Auxiliary Audio Input. Depending on what other input sources are connected (IPOD,
Sirius and CD Changer) these play sources will also appear in the display.
20. Menu Button:
Sirius Mode: See "Sirius Satellite Radio
Operation" for more information.
IPOD Mode: See "IPOD Operation" for more information.
5
Power On/Off:
Press the button to turn the unit On and Off.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
DIM
ASM
AUX
IN
Selecting a Play Source:
To select a play source, press the MODE button until the desired source appears in the display:
AM1, AM2, FM1, FM2 or FM3
(AM and FM Radio),
SIRIUS (Satellite Radio Input, if connected),
CD (Built-in CD Player),
CD-CH (CD Changer, if connected),
AUX IN (Auxiliary Audio Input) and
IPOD (IPOD Input, if connected).
Dimming the Display:
Press and hold the button to dim the brightness of the display. Press and hold again to restore the brightness of display.
SETUP
EQ
O EN SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
T
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
IN
Hold
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
N
Display Selection:
Press the DISP button to display the information according to the mode selected.
Example: Press the DISP button in the Sirius
Radio mode to display SONG-TITLE _> ARTIST
NAME _> CATEGORY _> SONG-TITLE .
Power On/Off:
Press the button to turn the unit On.
Selecting the Play Source:
Press the MODE button until “AM1, AM2, FM1,
FM2 or FM3” appears in the display.
Selecting the AM or FM Band:
Press the ENT BND button repeatedly and select from FM1, FM2, FM3, AM1 or AM2.
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
RPT
3
SHF
4
SCN
5
CATEGORY
6 MONO
SAT
DISP
DIM
ASM
AUX
IN
O EN
ETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
D SP
D M
ASM
AUX
N
O EN
EQ
SUB W
SETUP
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
D R/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
DIM
ASM
AUX
IN
6
Manually Tuning in a Radio Station:
Press and hold either the or button until
“MANUAL” appears in the display then release.
Then press the or again until the desired radio station appears in the display.
FM Stereo Operation:
If the stereo signal should become weak, press the MONO button until “MONO” appears in the display for Mono reception. Press the button again and “ST” appears in the display for stereo reception.
O EN
EQ
SUB W
SETUP
S-M
I OD
VOL
ENT
BND
OUD
VOL
MUTE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
Lower
Frequency
Higher
Frequency
Stereo Indicator
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
IN
Tuning in a Radio Station Using Seek:
Press and release either the or button and the tuner will scan-up to the next strong station and stop seeking, then start playing.
Memorizing Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Tune-in the desired radio station.
3. To store the station press and hold any of the six radio station recall buttons until you hear a beep.
O EN
EQ
SUB W
SETUP
S-
I OD
VOL
ENT
BND
VOL
OUD
MUTE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6
MONO
D SP
DIM
ASM
AUX
IN
Lower
Frequency
Higher
Frequency
Memorized Radio Station Indicator
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
Radio Station Recall Buttons
Recalling Memorizing Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and release one of the six radio station recall buttons to select the memorized radio station.
Tuning-In a Radio Station Using Tuner
Scanning:
Press the MENU button and “TSCAN” appears in the display. The tuner will search for the next strong station, play for 5 seconds then scan for the next strong station. To cancel this function press the MENU button again.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
DIM
ASM
AUX
IN
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
IN
7
Automatically Store Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and hold the ASM button until “AST” appears in the display. The tuner will search for the strongest stations and store them into memory. The new stations will replace stations that were previously stored in the current band.
Note: After the new stations are stored into memory the tuner will start scanning the newly memorized stations.
3. When a desired station is reached, press the
ASM button to stop scanning.
Scanning Stored Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press the ASM button and the tuner will scan for preset stations stored in the current band and pause for 5 seconds at each station.
When a desired station is reached, press the
ASM button again to stop scanning.
Volume:
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
D
DIM
ASM
UX
N
Hold
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D
D M
ASM
AUX
N
Increase
Decrease
SETUP
VOL
MUTE
ENT
BND
OL
OUD
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5
6 MONO D
Bass, Treble, Balance, Fader and
Subwoofer Controls
Select the desired sound mode by pressing the
SETUP button. The modes will be displayed in the following order: Bass, Treble, Balance, Fader,
Subwoofer Line Level Output and Subwoofer
Cutoff Frequency.
Bass:
1. Select the Bass mode (BAS) by pressing the
SETUP button.
Increase
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
D R/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
DIM
ASM
AUX
IN
Decrease
SETUP
VOL
MUTE
ENT
BND
OUD
OL
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DI
8
3. Control reverts back to volume control after 5 seconds.
Treble:
1. Select the Treble mode (TRE) by pressing the
SETUP button.
Increase
Decrease
3. Control reverts back to volume control after 5 seconds.
Balance:
1. Select the Balance mode (BAL) by pressing the
SETUP button.
2. To adjust the amount of sound output to the
Right speakers press the button.
To adjust the amount of sound output to the
Left speakers press the button.
BAL 00 = Equal sound right and left speakers.
BAL R12 = Right speakers only.
BAL L12 = Left speakers only.
3. Control reverts back to volume control after 5 seconds.
Right
Left
Fader:
1. Select the Fader mode (FAD) by pressing the
SETUP button.
2. To adjust the amount of sound output to the
Rear speakers press the button.
To adjust the amount of sound output to the
Front speakers press the button.
FAD 00 = Equal sound front and rear speakers.
FAD R12 = Rear speakers only.
FAD F12 = Front speaker only.
3. Control reverts back to volume control after 5 seconds.
Rear
Front
Subwoofer Line Level Output (SWG):
1. Select the Subwoofer Line Level Output mode
(SWG) by pressing the SETUP button.
2. To adjust the Subwoofer Line Level Output higher press the button.
To adjust the Subwoofer Line Level Output lower press the button.
SWG 00 = No gain.
SWG -12 = Minimum level.
SWG +12 = Maximum level.
3. Control reverts back to volume control after 5 seconds.
Note: If subwoofer output is turned Off, Subwoofer
Line Level Output mode is not accessible. See
Subwoofer Output (page 10) for more information.
Higher
Lower
SETUP
SETUP
SETUP
SETUP
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
VOL
MUTE
ENT
BND
OL
OUD
MODE
ST
1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DIS
VOL
MUTE
ENT
BND
OUD
OL
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D S
9
Subwoofer Cutoff Frequency (SWF):
1. Select the Subwoofer Cutoff Frequency mode
(SWF) by pressing the SETUP button.
2. To adjust the Subwoofer Cutoff Frequency press the or button.
SWF 160 = Low Pass 160Hz
SWF 120 = Low Pass 120Hz
SWF 80 = Low Pass 80Hz
3. Control reverts back to volume control after 5 seconds.
Note: If subwoofer output is turned Off, Subwoofer
Cutoff Frequency mode is not accessible. See
Subwoofer Output (page 10) for more information.
Higher
Lower
Equalizer (EQ):
Press the EQ button to choose between the preset equalizer settings: Rock, Pop, Classic, Vocal,
Flat and Jazz as indicated in the display area.
SETUP
VOL
MUTE
ENT
BND
OL
OUD
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5
6 MONO D SP
D M
ASM
AUX
N
Subwoofer Output:
Press and hold the EQ button to turn subwoofer output On and Off. “SUBW ON” appears in the display when the subwoofer is On and “SUBW
OFF” appears when the subwoofer output is Off.
“SW” permanently appears in the display when the subwoofer output in On.
Loud:
To boost high and low tones at low volume levels, press and hold the ENT BND button until
“LOUD ON” appears in the display. To deselect, press and hold the ENT BND button again until
“LOUD OFF” appears in the display.
Mute:
Press and release the MUTE button to mute the volume level. If a CD is playing the MUTE button will pause the disc. Press the MUTE button again to restore the volume or resume playing the disc.
Hold
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VO
MUTE
ENT
BND
VOL
OUD
MODE
ST
SW
1
D R CA RPT
3
SHF
4
SCN
5
6 MONO DISP
“SW” Subwoofer On Indicator
D M
ASM
AUX
N
Hold
Loud On Indicator
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
ENT
BND
OUD
VOL
MODE
ST
1
DIR/CAT
2
RPT
3
SHF
4
SC
5
LOUD
6 MONO D SP
DIM
ASM
AUX
IN
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
D R/CAT
2
RPT
3
SHF
4
SC
5
6 MONO DISP
DIM
ASM
AUX
IN
10
Disc Formats Supported by this Player:
CD
12cm disc
MP3
12cm disc
Disc Handling:
• Dirt, dust, scratches and warping disc will cause non operation.
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
• A disc should always be kept in its case when not in use to prevent damage.
• Do not place discs in the following places: Direct sunlight, Dirty, dusty and damp areas, Near car heaters, Car seats or dashboard.
Disc Cleaning:
Use a dry soft cloth to wipe the disc surface. If the disc is quite dirty, use a soft cloth slightly moist with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.
Preparing New Discs with Rough Spots:
A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc.Remove the rough edges in advance by using a ball point pen or pencil as shown. To do this, press the side of the pen or pencil against the inside and outside edges of the disc.
Label side up
Do not touch the underside of the disc
Do not bend
Wipe the disc from the center toward the outside edge
Note: A disc may become scratched somewhat
(although not enough to make it unusable) depending on handling and conditions in the usage environment.
Rough spots on outside edge
Rough spots on inside edge
Ball point pen or pencil
General Operations:
1. Press the button to turn the unit On.
2. Press the button to fold down the front panel to access the CD player slot.
3. Gently insert the disc into the slot with the label side up. The unit will automatically load the disc.
Note: If a CD does not auto-load, DO NOT
FORCE it into the slot, as you may already have a CD loaded as indicated by the disc icon.
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
D SP
D M
ASM
AUX
N
Inserted Disc Icon
Label Side Up
11
CD Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
EQ
O EN SUB W
SETUP
S-M
I OD
VOL
ENT
BND
VOL
OUD
MUTE
1
DIR/CAT
2
R
3
SHF
4
SCN
5
6 ONO D SP
DIM
ASM
AUX
IN
Lower
Track
Higher
Track
Track
Number
Display Selection:
Press the DISP button to display the elapse time.
Press again to display track number.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DIS
DIM
ASM
AUX
N
Pausing a CD:
Press the button to pause the disc, press it again to resume play.
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
D R CA
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
N
Ejecting a CD:
1. Press the button to fold down the front panel to access the disc slot.
2. Press the button to eject a disc.
Repeating a CD Track:
Select the desired track to repeat, then press the
RPT button once and “RPT” appears in the display. This track will now play repeatedly. Press the RPT button one more time and “RPT” will disappear from the display. The entire CD will now be repeated.
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
1
D R CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
D M
ASM
AUX
N
12
Random CD Track Play Order:
Press the SHF button until “SHF” appears in the display. The tracks on the disc will play in a random order. To cancel this feature press the SHF button again.
SETUP
EQ
O EN SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
DIM
ASM
AUX
IN
Preview CD Tracks:
Press the SCN button until “SCN” appears in the display. Each track on the disc will play for 10 seconds. To cancel this feature press the SCN button until “SCN” disappears from the display.
O EN
ETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
D M
ASM
AUX
N
General Operations:
1. Press the button to turn the unit On.
2. Press the button to fold down the front panel to access the disc player slot.
3. Gently insert the disc into the slot with the label side up. The unit will automatically load the disc.
Note: If a disc does not auto-load, DO NOT
FORCE into the slot, as you may already have a disc loaded.
SETUP
EQ
O EN SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5
6 MONO D SP
D M
ASM
AUX
N
Inserted Disc Icon
Label Side Up
Disc Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
Display Selection:
Press the DISP button to display the following
MP3 disc information: DIR NAME, TITLE,
ARTIST and ALBUM.
O EN
EQ
SUB W
SETUP
S-M
I OD
VOL
ENT
BND
OUD
VOL
MUTE
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
Lower
Track
Higher
Track
Track
Number
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
IN
13
Pausing a Disc:
Press the button to pause the disc. Press it again to resume play.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
Ejecting a Disc:
Press the button to fold down the front panel to access the disc slot. Press the button to eject the disc.
Repeating a Track/
Random Track Play Order/Preview Tracks:
(See CD Operation for details)
Load CDs into Changer:
Insert the CD magazine into the external CD changer.
Power On/Off:
Press the button to turn the unit On.
Selecting the Play Source:
Press the MODE button until “CDC” appears in the display.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
DIM
ASM
AUX
IN
CD Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
O EN
EQ
SUB W
SETUP
S-M
I OD
VOL
ENT
BND
VOL
OUD
MUTE
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6 NO D SP
DIM
ASM
AUX
IN
Lower
Track
Higher
Track
Track
Number
CD Disc Selection:
Press the 1 button to select a lower disc in the
CD changer. Press the 2 button to select a higher disc in the CD changer. The disc number will appear in the display.
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CA
2
RPT
3
SHF
4
SC
5 MONO DISP
D M
ASM
AUX
N
Lower
Disc
Higher
Disc
Disc
Number
14
Pausing a CD:
Press the button to pause the disc. Press it again to resume play.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
Repeating a CD Track or Disc:
Select the desired track to be repeated. Then press the RPT button and “RPT” will appear in the display. This track will play repeatedly.
Press and hold the RPT button. “RPT” and
D-DIR
will appear in the display. The disc will now play repeatedly.
To cancel either function, press the RPT button again.
Random CD Track or Disc Play Order:
Press the SHF button and “SHF” will appear in the display. The tracks on this disc will play in random order.
Press and hold the SHF button and “SHF” and
D-DIR
will appear in the display. The tracks on all the discs will play in random order.
To cancel either function, press the SHF button again.
Preview CD Tracks or Disc:
Press the SCN button and “SCN” will appear in the display. Each track on the current disc will play for 10 seconds.
Press and hold the SCN button and “SCN” and
D-DIR
will appear in the display. The first track on every loaded disc will play for 10 seconds.
To cancel either function, press the SCN button again.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R/CAT
2
RPT
3
SHF
4
SCN
5
D-D R
6 MONO DISP
DIM
ASM
AUX
IN
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
RPT
3
SHF
4
SCN
5
D-D R
6 MONO DISP
D M
ASM
AUX
N
SETUP
EQ
O EN SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
D DIR
RP
3
SHF
4
SCN
5 6 MONO D SP
D M
ASM
AUX
N
15
Note:
If your Sirius tuner is not activated, call 1-888-539-7474 to activate. The Sirius Tuner ID Number
(ESN) is required during the activation process. Following the instructions below to access the Sirius
Tuner ID Number (ESN):
Accessing your Sirius Tuner ID Number (ESN):
1.
Press the MODE button until “SIR1 RADIO” appears in the display area.
O EN
EQ
SUB W
ETUP
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
SAT
D SP
AUX
N
S-MOD
I OD MENU
MENU
D M
ASM
2.
Press the MENU button until “DIR - - -” appears in the display area.
O EN
SETUP
EQ
SUB W
S MOD
I OD ME
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
RPT
3
SHF
4
SCN
5
6 MONO
SAT
DISP
D M
ASM
AUX
N
3.
Press the ENT BND button until “ESN = 00..” appears in the display area. The ESN number will scroll across the display.
4.
Press the or button to exit.
EQ
O EN SUB W
SETUP
S M
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
SAT
D SP
D M
ASM
AUX
N
Please note that satellite radio signal may be blocked by trees, buildings or other obstacles.
Information display during reception:
ANTENNA ERROR: When an antenna issue exists.
ACQUIRING SIGNAL: When a channel is being tuned-in (no signal is yet received).
INVALID CHANNEL: A channel without a broadcast has been selected, or the receiver may not be activated.
CALL 888-539-SIRIUS TO SUBSCRIBE: A channel not covered by your contract or the Sirius tuner is not activated. Call Sirius Service Center 1-888-539-7474, or visit them online at www.siriusradio.com.
Channel Selection Modes:
Channels are selected by the following methods:
• Manual Tuning: Use the Manual Tuning method to scan thru the channels.
• Direct Tuning: Use the Direct Tuning methods when you know the desired channel.
• Category Tuning: Use the Category Tuning method when you know what category you want to scan for a channel.
For details, see the following operation descriptions:
16
Manual Tuning:
Press the or button until the desired channel appears in the display.
O EN
EQ
SUB W
SE UP
S M
I OD M
VOL
ENT
BND
VOL
OUD
MUTE
1
DIR CAT
2
SONG-T T E
RPT
SHF
3 4
SC
5
6 MONO
SAT
D SP
D M
ASM
AUX
N
Lower
Channel
Higher
Channel
Channel
Number
Direct Tuning:
1. Press the MENU button until “DIR - - -” appears in the display.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
SAT
DISP
DIM
ASM
AUX
IN
2. Press the or button to select the first number of the desired channel.
O EN
EQ
SUB W
ETUP
VOL
ENT
BND
VOL
OUD
MUTE
S-M
I OD
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
SAT
D SP
D M
ASM
AUX
N
Lower
Number
Higher
Number
3. Press the MENU button to select the next number of the channel. Use the or buttons to select the desired number. Repeat this procedure for the third number.
O EN
EQ
SUB W
ETUP
S-MOD
I OD MENU
MEN
VOL
MUTE
ENT
BND
VOL
OUD
MODE
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6
MONO
SAT
D SP
D M
ASM
AUX
N
4. Press the ENT BND button and the channel will start playing.
O EN
EQ
SUB W
SETUP
VOL
MUTE
ENT
ND
VOL
OUD
MODE
1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
SAT
DISP
DIM
ASM
AUX
IN
17
Category Tuning:
1. Press the MENU button and “CATEGORY” starts flashing in the display.
2. Press the DISP button until only a flashing
“CATEGORY” appears in the bottom of the display. “SONG-TITLE” or “ARTIST NAME” will not appear in the display.
3. Press the 1 or 2 button to select the desired category.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
D R/CAT
2
SONG-T T E
RPT
SHF
3
4
SC
5
CATEGOR
MONO
SAT
DISP
Category
Mode “Flashes”
DIM
ASM
AUX
IN
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
RPT
3
SHF
4
SCN
5
CATEGOR
6 MONO
SAT
DIS
Category Mode
Only in Display
D M
ASM
AUX
N
O EN
ETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR CAT
2
RP
3
HF
4
SCN
CATEGOR
5
6 MONO
SAT
D SP
D M
ASM
AUX
N
Category
4. Press the or button to select the desired channel inside the category.
O EN
EQ
SUB W
SETUP
S-MO
I OD M
VOL
ENT
BND
VOL
OUD
MUTE
1
DIR/CAT
2
RPT
3
SHF
4
SCN
CATEGOR
5
6 MONO
SAT
D SP
DIM
ASM
AUX
N
Lower Channel in Category
Higher Channel in Category
5. Press the ENT BND button and the channel will start playing.
O EN
EQ
SUB W
ETUP
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
CATEGOR
6 MONO
SAT
D SP
D M
ASM
AUX
N
Switching the Display:
Press the DISPLAY button to cycle through the following display modes:
SONG-TITLE _> ARTIST NAME _> CATEGORY _>
SONG-TITLE …
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
SONG-T T E ART ST NAME
RP SHF
SCN
CATEGOR
3 4 5
6 MONO
SAT
DISP
D M
ASM
AUX
IN
Display Modes
18
Memorizing a Preset Channel:
1. Press the ENT BND button to select either the
SIRIUS 1, SIRIUS 2 or SIRIUS 3 Sirius band.
Each band can memorize 6 channels for a total of 18 channels.
2. Tune-in the desired Sirius channel.
3. To store the channel press and hold anyone of the six channel recall buttons until you hear a beep.
Recalling Memorizing Sirius Channel:
1. Press the ENT BND button to select either the
SIRIUS 1, SIRIUS 2 or SIRIUS 3 band.
2. Press and release the Sirius channel recall button 1, 2, 3, 4, 5 or 6 to select the memorized channel.
Sirius Band
Preset Channel
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
SONG-T T E
RPT SHF
3 4
SCN
5 6 MONO
SAT
D SP
D M
ASM
AUX
N
Sirius Channel Recall Buttons
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
1
D R/CAT
2
SONG TIT E
RPT SHF
3 4
SCN
5 6 MONO
SAT
DISP
DIM
ASM
AUX
IN
Scanning Stored Sirius Channels:
1. Press the ENT BND button to select either the
SIRIUS 1, SIRIUS 2 or SIRIUS 3 band.
2. Press the ASM button and the tuner will scan for preset channels stored in the current band, and pause for 5 seconds at each channel.
When a desired channel is reached, press the
ASM button again to stop scanning.
Skipping Sirius Channel:
You can program the radio to skip a Sirius channel you do not want.
1. Tune to the channel to be skipped (see Sirius
Satellite Radio Operation for more details).
2. Press the MENU button until “SKIP” appears in the display.
3. Press the ENT BND button until “SKIP” flashes in the display.
4. Press the button to tune in the next higher channel.
5. Wait 10 seconds and “SKIP” disappears from the display. The channel will now be skipped.
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
SONG-T T E
RPT SHF
3 4
SCN
5
6 MONO
SAT
DISP
D M
ASM
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR/CAT
2
SONG TIT E
RPT SHF
3 4
SCN
5
6
SKI
SAT
NO D SP
DIM
ASM
AUX
N
Skip Indicator
O EN
EQ
SUB W
SETUP
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR CAT
2
SONG-TIT E
RPT SHF
3 4
SCN
5
SKI
SAT
6 MONO D SP
D M
ASM
AUX
N
19
Reinstating a Skipped Sirius Channel:
1. Tune to a channel next to a skipped channel.
(Example: If channel 2 is skipped, tune to channel 3, CH003.)
2. Press the MENU button until “SKIP” appears in the display.
3. Tune-in the skipped channel. (Example: Press the button and “CH002” appears in the display).
Note: “SKIP” will be flashing in the display on all skipped channels.
4. Press the ENT BND button until “SKIP” stops flashing.
5. Wait 10 seconds and “SKIP” disappears from the display. The channel has now been reinstated.
General Operations:
1. Press the button to turn the unit On.
2. Connect an IPOD to the cable attached to the
WR1-CD.
3. The unit will automatically switch to the IPOD mode and start playing.
Note: The IPOD controls will become inoperable, and the WR1-CD now controls the IPOD.
IPOD Mode Button Location and Functions:
O EN
SE UP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
SONG-TIT E
RPT
SHF
3
4
SCN
5 6
SKI
SAT
ONO D SP
D M
ASM
AUX
N
Skip Indicator
O EN
EQ
SUB W
SETUP
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R CAT
2
SONG-T T E
RPT SHF
3 4
SCN
5
SKI
SAT
6 MONO DISP
D M
ASM
AUX
IN
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
D M
ASM
AUX
N
3
4
OPEN SUB.W
SETUP
S-MO
IPOD ME U
MENU
VOL
MUTE
ENT
BND
VOL
LOUD
MODE
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
DIM
ASM
AUX
IN
2
1
2
1. Menu Button: Same operation as the MENU button on an IPOD.
2. Next and Previous Button: Press these buttons to scroll through the menu items, which is the same operation as the IPOD’s Click Wheel.
3. Play/Pause Button: Same operation as the button on an IPOD.
4. ENT BND Button: Same operation as the Center
Select button on an IPOD.
20
Browse for a Song:
1. Press the MENU button until PLAYLIST appears in the display.
SETUP
EQ
O EN SUB W
S MOD
I OD
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
D M
ASM
AUX
N
2. Press the or button to select the
“SONGS” menu.
3. Press the ENT BND button to activate the
“SONG” menu.
O EN
EQ
SUB W
SETUP
S MO
I OD
VOL
ENT
BND
VOL
OUD
MUTE
1
DIR CAT
2
RPT
3
SHF
4
SCN
5
6 MONO D SP
D M
ASM
AUX
N
or
Song Title
O EN
EQ
SUB W
SETU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5
6 MONO D SP
D M
ASM
AUX
N
4. Press the or button to select the desired song from the menu.
5. Press the ENT BND button to start playing the selected song.
O EN
EQ
SUB W
SETUP
VOL
ENT
BND
VOL
OUD
MUTE
1
D R/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
I
or
DIM
ASM
AUX
IN
O EN
EQ
SUB W
SETUP
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
D R/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
DIM
ASM
AUX
IN
Pausing a Track:
Press the button to pause the track. Press it again to resume play.
O EN
SE UP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
D M
ASM
AUX
N
Repeating a Track:
Select the desired track to repeat, then press the
RPT button once and “RPT” appears in the display. This track will play repeatedly. To cancel this function, press the RPT button one more time and “RPT” will disappear from the display.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
21
Random Order Track Play :
Press the SHF button until “SHF” appears in the display. The tracks on the IPOD will now play in a random order. To cancel this feature, press the
SHF button until “SHF” disappears from the display.
Preview Tracks:
Press the SCN button until “SCN” appears in the display. Each track on the IPOD will now play for
10 seconds. To cancel this feature press the SCN button until “SCN” disappears from the display.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
1
D R/CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
DISP
DIM
ASM
AUX
IN
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE 1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO DISP
DIM
ASM
AUX
IN
Display Selection:
Press the DISP button to display the following track information: Track, Elapse Time and Song
Title.
O EN
SETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR/CAT
2
R SHF
4
SCN
5 6 MONO D SP
DIM
ASM
AUX
N
Display Modes
Selecting an Auxiliary Audio Play Source:
1. Press the button to turn the unit On.
2. Press the MODE button until “AUX” appears in the display.
3. Refer to the audio device’s owners manual for proper operation.
Note 1: The WR1-CD will not control the auxiliary source, but it can adjust the sound controls.
Note 2: Only connect ONE auxiliary input source to either the front 3.5mm or the rear RCA inputs.
DO NOT connect an auxiliary source to both the front and rear inputs.
If the fuse should blow, check that the wiring is correct. If the wiring is correct, replace the fuse with the same amperage rating as the original (15 amp).
O EN
SETUP
EQ
SUB W
S MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE 1
DIR CAT
2
RPT
3
SHF
4
SCN
5 6 MONO
D M
ASM
AUX
15 Amp Fuse
22
Button Beep On and Off Confirmation:
Follow the instructions below to turn On or Off the button when pressed beep confirmation.
1. Press and hold the SETUP button approximately 10 seconds until “BEEP ON” appears in the display.
2. Press the button for beep confirmation
Off, and press the button for beep confirmation On.
VOL
VOL
3. Wait 5 seconds, and the unit will return to the last display mode.
Primary Volume:
Follow the instructions below to adjust the initial start-up volume level.
1. Press and hold the SETUP button approximately 10 seconds until “BEEP ON” appears in the display. Press the SETUP button again until “P-VOL 12” appears in the display.
2. Press the
VOL mary volume.
or button to adjust the pri-
3. Wait 5 seconds and the unit will return to last display mode.
Area Radio Frequency Adjustment:
Follow the instructions below to change the area configuration.
1. Press and hold the SETUP button approximately 10 seconds until “BEEP ON” appears in the display. Press the SETUP button two more times until “AREA USA” appears in the display.
2. Press the area.
VOL or button to adjust the
Note: If operating the unit in the USA do not change the area.
“AREA OCE” = Australia and New Zealand.
“AREA EUR” = Europe.
3. Wait 5 seconds and the unit will return to last display mode.
Revert to Factory Settings:
1. Press the MODE button until “AM1, AM2,
FM1, FM2 or FM3” appears in the display.
2. Press and hold the MUTE button until the unit turns off. The radio has now reverted back to factory settings.
3. Press the button the turn the unit on.
O EN
ETUP
EQ
SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
ST
1
DIR CAT
2
RPT
3
SHF
4
SCN
5
6
MONO
D SP
D M
ASM
AUX
N
O EN
SETUP
EQ
SUB W
S MOD
OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
IN
SETUP
EQ
O EN SUB W
S MOD
OD MENU
MENU
VOL
MUTE
ENT
BND
OUD
VOL
MODE
ST
1
D R CAT
2
RPT
3
SHF
4
SCN
5 6 MONO DISP
D M
ASM
AUX
IN
Hold
SETUP
EQ
O EN SUB W
S-MOD
I OD MENU
MENU
VOL
MUTE
ENT
BND
VOL
OUD
MODE
T
1
DIR/CAT
2
RPT
3
SHF
4
SCN
5
6 MONO D SP
DIM
ASM
AUX
IN
23
Dashboard
Metal
Strap
Washer
Sheet Metal Screw
Nut
Mounting
Sleeve
Removing the Unit from Dashboard
1. Remove the metal strap holding the
back of the radio chassis.
2. Remove trim ring from radio.
3. Insert the removal keys into the small
slots on the left and right side of
chassis panel.
4. Push the removal keys until they engage
the release levers.
5. Pull the unit out.
Trim
Ring
Removing the Face Plate:
1. Press the button to fold down the front panel.
2. Pull on the corner of the face plate to remove.
Removal
Keys
Reinstalling the Face Plate:
1. To reinstall the face plate, insert the corner of the face plate into the radio housing.
2. Insert the other corner until it snaps in.
3. Fold up face plate.
24
Left Front Speaker
_
White/Black Wire
+
White Wire
Right Front Speaker
Gray/Black Wire
_
Gray Wire
+
Left
Rear Speaker
_
Green/Black Wire
+
Green Wire
Powered Subwoofer
(Optional Model: LS-SUB-75)
Violet/Black Wire
Right
Rear Speaker
_
Violet Wire
+
Subwoofer Output (Mono)
Green Cable
This unit for use only with a 12 Volt DC power source with a negative ground.
Red Wire (+) to 12 Volt Ignition
Yellow Wire (+) to 12 Volt Constant
Black Wire Ground
Blue Wire Amplifier Control
2-Channel
Audio Output
Amplifier (Optional)
Rear
Line Out
Gray Cable
25
Sirius
Antenna
(Optional)
Sirius Receiver
(Optional)
26
MENU
IPOD
(Optional) iPod Cable (Optional)
Rear Auxiliary Audio Input
Yellow Cable
External Audio Source
(Optional)
WARNING! Only connect ONE Auxiliary Audio Input source to either the front 3.5mm or the rear RCA inputs. DO NOT connect an auxiliary source to both the front and rear inputs.
CD Changer
(Optional)
External Automotive
Type Antenna
(Optional)
Infrared Remote Eye
(Optional)
Wired Remote Controller
(Optional Model: WRC-P1, WRC-S1, WRC-S2)
27
LIMITED WARRANTY
This warranty will be honored only in U.S.A.
MB Quart offers to the original purchaser a one (1) year warranty period from date of purchase. Except as specified below, this warranty covers all defects in material and workmanship in this component.
The following are not covered by the warranty:
1. Any product which is not distributed in the U.S.A. by TriStar Distributing or which is not purchased in the U.S.A. from an authorized TriStar Distributing dealer.
2. Any product on which the serial has been defaced, modified or removed,
3. Damage, deterioration or malfunction resulting from: a. Any shipping damage (claims must be presented to the carrier).
b. Installation or removal of the product.
c. Accident, acts of nature, misuse, abuse, neglect, unauthorized product modification or failure to follow instructions supplied with the product.
d. Repair or attempted repair by anyone not authorized by TriStar Distributing.
e. Any other cause that does not relate to a product defect.
If within the one-year warranty period your MB Quart marine product should fail, please contact the dealer where the product was purchased to obtain authorization for warranty service. You must include a copy of the original dated sales receipt as proof of warranty coverage. All warranty service returns must be shipped freight prepaid. We will pay the return shipping charges, if repairs are covered by the warranty and we are shipping within the United States.
After the warranty period if your MB Quart Marine Product ever needs service, please call 1-800-621-2278 and ask for the service department, to determine if the repairs are feasible.
LIMITATION OF IMPLIED WARRANTIES
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.
EXCLUSION OF DAMAGES
TriStar Distributing liability for any defective product is limited to the repair or replacement of the product at our discretion. TriStar Distributing shall not be liable for:
1. Installation or removal, damage to other property caused by any defects in components, damages based upon inconvenience, loss of use of the product; or any other damages, whether incidental, consequential or otherwise.
2. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
This warranty gives you specific rights, and you may have other rights, which may vary from state to state.
If a problem develops during or after the Limited Warranty Period; or if you have any questions regarding the operation of the product, you should contact TriStar Distributing warranty department.
TriStar Distributing
58263 Charlotte Avenue
Elkhart, Indiana 46517
800-621-2278
© Copyright 2008 MB Quart
Patent No.: US D554,595
WR1-CD-UM Rev. B
6-25-08

Public link updated
The public link to your chat has been updated.
Advertisement