Samsung CB-21K5ML, CB-21N30MJ, CB-21N30F7 User manual

Samsung CB-21K5ML, CB-21N30MJ, CB-21N30F7 User manual
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television
Do NOT expose the television to
extreme temperature conditions
(below 50C and above 350C) or
to extreme humidity conditions
(less than 10% and more than
75%).
If the television is broken, do not
try to repair it yourself. Contact
qualified survice personnel.
Do NOT expose the television to
direct sunlight.
Do NOT expose the television to
any liquids.
During a storm conditions
(especially when there is
lightening) unplug the television
from the mains socket & aerial.
If the remote control is not used
for a long period of time, remove
the batteries and store it in a cool,
dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
➢
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION :
TO PREVENT ELECTRICAL SHOCK,DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING :
TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
☛
The main voltage is indicated on the rear of
the TV set and the frequency is 50 or 60Hz.
2
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
Mode
CS
!
System
PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43 (NTSC3.58; option)
CB
PAL-B/G
CZ
PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43
Infrared Remote Control (Depending on Model)
➣ Buttons and markings are subject to change
TELEVISION STAND-BY
DIRECT CHANNEL SELECTION
ONE/TWO /THREE-DIGIT
CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
TUNER/CABLE NETWORK
SELECTION
MENU DISPLAY
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
EXIT FROM ANY DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND EFFECT SELECTION
GAME KEY
TURBO SOUND
CHANGE CONFIRMATION
PICTURE SIZE
AUTOMATIC SWITCH OFF
PICTURE MODEL SLECTION
SOUND MODE SELECTION
CHANNEL SCAN KEY
The performance of the remote control may be affected by bright light.
3
Connecting the Aerial (or Cable Television Network)
To view television channel correctly,a signal must be received by
the set from one of the following sources:
An outdoor aerial
A cable television network
Plug the arrial or cable network input cable to the 75 Ω coaxial socket on
the rear of the television.
75Ω
Cable
Television
Network
Rear of TV
Switching Your Television On and Off
The mains lead is attached to the rear of the television
1
Plug the mains lead into an appropriate socket.
➢ The mains voltage is indicated on the ear of the TV set and the
frequency is 50 or 60Hz.
2
Press the POWER
Result :
(ON/OFF) button on the front of the television.
The standby indicator lights up on the front panel
3
Press the POWER button on the remote control to switch the
television on.
Result : The last watched programme reselected automatically.
4
To swith your television off, press the POWER
again on the front of the television,
(ON/OFF) button
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it On.
1
Press the POWER
Result :
4
button on the remote control.
The screen is turned off and the standby indicator on
the front of the television lights up.
2
To switch the screen back on, simply press the power
again on the remote control.
button
➢
Do not leave your television in standby mode for long period of time
(when you are away on holiday, for example).
In this case, you should switch it off completely.
Plug & play Feature
1
If the television is in standby mode, press the POWER
the remote control.
Result :
Press the or button to select required language. Press the
ENTER button to enter the language and then the message
“Ant Input Check” is displayed.
3
Make sure that the antenna is connected to the TV, and then press
the ENTER button to store the channel.
RETURN
ENTER
Result :
SEARCH
P 1
102MHZ
7 %
STOP
ENTER
When searching and storing is complete, the “Time” menu is
displayed.
5
Press the or button to move to the hour or minute. Set the
hour or minute by pressing the or button.
6
When you have finished, press the MENU button.
EXIT
Clock
- - : - -
ENTER
am
Result :
Exit
7
2
SETUP
Press the MENU button then pess the or button to select
the “Set UP”,and then press Enter button.
Select the “Plug & Play” by pressing the or button,and then
Enter button.
press the
Result :
PLUG & PLAY
The message “ENJOY YOUR WATCHING” is displayed.
If you want to reset this feature...
1
ENJOY YOUR WATCHING
TV
The horizontal bar is displayed, and then channels are
stored in an order which reflects their position in the
frequency range.
4
Time
Move
The The message ‘Plug & Play’ is displayed. It flickers
for little while and then the ‘Language’ menu is
automatically displayed.
2
Plug & Play
Ant. Input Check
button on
The message “Plug & Play ” is displayed.
LANG. :
ENGLISH
TIME
CHILD LOCK
MORE
MOVE
ENTER
RETURN
Choosing Your Language
SETUP
TV
PLUG & PLAY
LANG. :
ENGLISH
TIME
CHILD LOCK
MORE
MOVE
ENTER
When you start using your television for the first time you must
select the language, which will be used for displaying menus and
indications.
“Set UP”.
2
language by pressing the Enter button repeatedly.
RETURN
3
5
Press + or - button to select the “Language” and select a particular
When you have finished, press the EXIT
button or press the MENU
button repeatedly to return to normal viewing.
7
Sorting the Stored Channels
TV
CHANNEL
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
AUTO STORE
MANUAL STORE
automatically stored.
Give easily remembered numbers to the channels that you
ADD/DELETE
watch most often.
SORT
MOVE
ENTER
EXIT
TV
1
Press the MENU button and Press the or
“Channel” and Press the Enter button.
2
Press the
button.
SORT
FROM
: P 1
TO
: P---
STORE
: ?
Result :
3
ADJUST
RETURN
TV
: P 1
TO
: P--3
STORE
: OK
Enter
The “Sort” menu is displayed with the “From” selected.
The Selected channel’s picture is displayed.
4
Press the
5
Press the or button until the new number by which you wish to
identify the channel is displayed.
SORT
FROM
button to select the “Sort” and Press the
Press the or button until the channel number that you wish to
change is displayed.
Result :
MOVE
or
button to select the
Result :
or
button to select the “To”.
The seleted channel is exchanged with the one
pervious stored to the chosen number.
Example : If you select “P1” for the “From” and “P3” for the “To” :
Channel 1 become channel 3.
Channel 3 become channel1.
MOVE
ENTER
RETURN
6
To
Press the...
Confirm the exchange of
channel number
or
button to select the “Store”.
Enter button.
Result : “OK” is displayed.
You can exchange other channel numbers by seleting “From”
and returning to step 3
7
8
When you have finished, sorting channels, Press the EXIT
button or press the MENU button repeatedly to return to normal
viewing.
Changing the Picture Standard
PICTURE
TV
MODE
: DYNAMIC
CUSTOM
COLOR TONE : NORMAL
SIZE
: NORMAL
MORE
MOVE
ENTER
You can select the type of picture which best corresponds
to your viewing requirements. The following picture effects are
available in the order given:
Dynamic,Standard,Movie,Custom.
1
Press the MENU button & Press
2
Press the ENTER button.
Result :
or
button to select picture.
The “Picture” menu is displayed.
RETURN
Result :
The “Mode” menu is selected.
3
Select to satisfy your preference by pressing the ENTER button.
4
When you have finished, press the EXIT
button or press the MENU
button repeatedly to return to normal viewing.
You can select the required picture effect by simply pressing
the “P.MODE” button on the remote control.
9
Press the
b
utton to select the picture
Press the ENTER button
ENTER button
& press the
Press the
button to select the picture
ENTER button
ENTER
To adjust Color Tone Press Menu button & press
pictutre menu.
5
6
7
Press
Enter button & press
button to select
button to select color tone.
Press ENTER button to select the required option (Normal, Warm1,
Warm2, Cool2, Cool1.)
“Set up” & press the
ENTER button.
ENTER
“Set up” & press the
ENTER button.
press the ENTER
To display the Channel information & Current time press the “INFO”
button
ENTER
ENTER
clock selected.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
“Message”
ENTER
ENTER
You can enjoy the game programmed in this TV:
Push Box.
The objective of the game is to move all the
yellow boxes to the blank boxes. The
. Blank box
will become red when the yellow box is placed in it.
Press the game button to enter the game mode.
Result: The Push game window will be displayed
with following options:
New Game
Stage
Help
Exit Game
When you select STAGE, you can selectfrom
stage 1 to stage 10 by the k eys defind as enter &
select up/do wn. As y ou finished select stage ,
just press Menu up k ey to select ne w game and
press enter key to start a new game.
The little man will mo ve left-r ight with <-> . K ey &
up do wn by key.
Ev ery time you push in one box, you will gain one
score . And after you move all of the boxes to the red
destination, you succeessfully pass the stage ,
and then you will see a prompt as sho wn in the
picture.
If y ou press k ey up, y ou can continue to challenge
yourself to stage 2, but if you do not w ant to continue,
you can just prss key doen to return to the game
selection menu.
The most important instruction is , y ou can have
one chance to step back if you move a wrong step.
When y ou come across the bad luck, you just need
to press the menu key & select step back option.
During the game time , y ou can exit game any time
by pressing menu key, and continue the game anytime
you want unless you turn off the TV set and if you
made an irreversib le mistak e , y ou can select
RESTAR T GAME to replay the current stage.
AA68-03662A-00 (ENG)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement