AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 1 COLOR TELEVISION Owner’s Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Connection Panel (depending on the model) ➢ The actual configuration of your TV may be different, depending on your model. Front (or Side) Panel Rear Panel Register your product at www.samsung.com/global/register Audio input or The actual configuration of your TV may be different, depending on your model. Front (or Side) Panel 1 2 3 4 5 6 On-screen menu display Volume adjustment Channel selection Remote control sensor Standby indicator Power on/off ◆ You can use the 3 buttons to switch the TV on when it is in standby mode depending on the model. ◆ The 2 and 3 buttons also have the same function as the œ/√/†/… buttons on the remote control. ◆ If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. Headphone jack Cable television network Control Panel (depending on the model) ➢ Video input ☛ ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the 1 (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the RCA Output The RCA2 connectors are used for equipment, such as a recording VCR or audio system. Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. Connecting Headphones The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. ➢ When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. Connecting to the RCA Input The RCA3 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA4 connectors are used for equipment such as a DVD with component output (480i only). English - 1 AA68-03808A-00 AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 2 Remote Control (depending on the model) 4 ➢ 5 Operation of remote control may be affected by bright artificial light near to the TV. 6 7 8 9 0 ! @ # / Used to increase or decrease the volume. MENU Used to display the onscreen menu or return to the previous menu. …/†/œ/√ Used to control the cursor in the menu. S.MENU Used to display the sound menu. TURBO Used to select the turbo sound option. P.SIZE Used to change the screen size. DUAL I-II (option) Used to select the sound mode. SOURCE Used to display all of the available video sources. INFO Used to view the channel information and setting status you selected. PRE-CH Used to switch repeatedly between the last two channels displayed. $ P / Used to display the next or previous stored channel. % EXIT Used to exit from any display or return to normal viewing. ^ MUTE Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or button. & ENTER While using the onscreen menus, press the ENTER button to activate (or change) a particular item. * S.MODE (option) Used to select the sound effect. ( P.MODE Used to select the picture effect. ) TV Used to return to the TV mode when it is in external input mode. a SLEEP Used to select a preset time interval for automatic shut off. 3 -/-Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number. The mains lead is attached to the rear of the television. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the “I” button (On/Off) on the front (or side) of the television. 3 Press the POWER button on the remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” or “Channel - Manual Store” on page 4. ➢ If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Function - Plug & Play” on page 3. 4 To switch the television off, press the “I” button (On/Off) on the front (or side) of the television. Placing the Television in Standby Mode The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER button on the remote control while viewing. The television is in standby mode. 2 To switch the television back on, simply press it again. ☛ Installing Batteries 1 POWER Used to switch the TV on and off. 2 Numeric buttons Used to select channels directly. Switching the Television On and Off Remove the cover. Install two AAA size batteries, then replace the cover. When the remote control does not operate normally, check that the “+” and “-” ends of the batteries are inserted correctly or the batteries are drained. ➢ Do not mix battery types, i.e. alkaline and manganese. English - 2 Do not leave the television in standby mode for long periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial. AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 3 Viewing the Menus Function - Plug & Play 1 When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. Press the MENU button. The main menu is displayed on the screen. Its left side has four icons: Picture, Sound, Channel, and Function. 1 he 2 Press the … or † button to select one of the icons. Press the œ or √ button to access the icon’s sub-menu. 3 Press the … or † button to move to items in the menu. Press the œ or √ button to enter items in the menu. e 4 sic o 5 2 Press the …/†/œ/√ button to change the selected items. Press the MENU button to return to the previous menu. Press the EXIT button to exit from the menu. Off) e Plug & Play If the television is in standby mode, press the POWER button on the remote control. The Plug & Play is displayed. It flickers for a little while, and then Language menu is displayed. Select the appropriated Language language by pressing the … English Indonesia or † button. Press the Malaysia MENU button. Adjust Select The Ant. Input Check is displayed. Ant. Input Check ➢ If any language is not Auto Store Exit selected, the language menu will disappear about 30 seconds later. 3 Make sure that the antenna is connected to the television (refer to page 1). 4 Press the œ or √ button to search the channels. The searching starts. To stop the search, press the MENU button. P 1 471 MHz It English - 3 When the channel searching has finished, the Time menu is displayed with Clock selected. Time Clock Move Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the … or † button. 7 When you have finished, ENJOY YOUR WATCHING press the MENU button. The ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated. Function Language : English √ Time √ Plug & Play Blue Screen : Off √ Child Lock Select 48% Exit -- : -- am Exit 6 Re-setting the Plug & Play Method: MENU ➜ …/† (Function) ➜ œ/√ ➜ …/† (Plug & Play) ➜ œ/√ continued... . 5 Enter Exit AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 4 Channel - Auto Store Channel - Manual Store (depending on the model) Channel - Add/Erase You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. Channel You can store channels, Manual Store including those received via Color System : AUTO cable networks. When storing Sound System : B/G Search : -/+ channels manually, you can Prog.No. : 18 Store :? choose: - Whether or not to store each Select Adjust Exit of the channels found - The programme number of each stored channel which you wish to identify Channel You can exclude channels you Add/Erase have chosen from the channels P 1 : Added you scanned. When you scan P 2 : Added P 3 : Added through the stored channels, P 4 : Added those you have chosen to skip are not displayed. All of the Select Adjust Exit channels that you did not specifically choose to skip are displayed during scanning. Channels are sorted and stored Channel in the order which reflects their √ Auto Store √ Manual Store position in the frequency range √ Add/Erase √ Fine Tune (with lowest first and highest √ Sort last). The programme originally selected is then displayed. Select Enter Exit ➢ To stop the search before it has finished, press the P 1 471 MHz 48% MENU button. When finished, the Sort menu Exit is displayed. To sort the stored channels into the desired numerical order, refer to “Channel - Sort”. To exit without sorting, press the MENU button. ◆ Color System: AUTO/PAL/SECAM/NTSC4.43/NTSC3.58 ➢ NTSC4.43 is a ‘trick’ playback mode used by special VCR’s to play PAL-recorded videos in NTSC mode. ◆ Sound System: B/G,I,D/K,M ◆ Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. ◆ Prog.No. (Programme number to be assigned to a channel) ◆ Store (When you store the channel and associated programme number) ➢ If there is no sound or abnormal sound, re-select the sound standard required. Channel Sort From To Store Select :P 1 : P-: ? Adjust Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Channel - Sort This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. Select Added or Erased by pressing the œ or √ button repeatedly. Channel Fine Tune Tune Store Erase Select : -/+ : ? : ? Adjust Exit ◆ Tune: You can obtain a sharp and clear picture and good sound quality. ◆ Store: You can memorise adjusted picture or sound. ◆ Erase: You can erase adjusted picture or sound. Exit ◆ From: Channel number to be changed. ◆ To: New channel number to be identified. ◆ Store: Confirmation the exchange of channel numbers. English - 4 AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 5 Function - Time Function - Child Lock Function - Language (depending on the model) Function ◆ Clock Time You can set the television Clock 11:35 am clock so that the current time Timer On On time 07:00 am is displayed when pressing Off time 23:00 pm the INFO button on the remote control. You must Select Adjust Exit also set the time if you wish to use the automatic on or off timers. ➢ When pressing the “I” button (On/Off) on the front (or side) of the television, the clock setting will be reset. Function This feature allows you to Child Lock prevent unauthorized users, Child Lock : On such as children, from watching Prog.No. :1 Lock :? unsuitable programmes by muting out video and audio. Child Lock cannot be released Select Adjust Exit using front (or side) panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children. It is variable depending on the model. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications. ◆ Timer Select On to activate the On/Off timers. ◆ On time / Off time You can set the On/Off timers so that the television will switch on or off automatically at the time you select. ☛ You must set the clock first. ◆ Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. Press the SLEEP button on the remote control. If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the television switches to standby mode is displayed. ☛ Function Language : English √ Time √ Plug & Play Blue Screen : Off √ Child Lock Select Adjust Exit ◆ Child Lock: On/Off If you want to unlock a channel, set to Off. ◆ Prog.No.: Channel number to be locked. ◆ Lock: When press the œ or √ button, the Locked is displayed. ➢ If any channel is locked, you can not enter the Channel menu by using the control buttons on the television, and the Not available is displayed. You can access by using the remote control only. Auto Power Off When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer “On” mode and prevents overheating, which may occur if a TV is on for too long. . English - 5 Function - Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off. Function Language : English √ Time √ Plug & Play Blue Screen : Off √ Child Lock Select Adjust Exit AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 6 Picture Mode / Adjust / Size (depending on the model) ◆ Mode: Custom/Standard/Sports/Natural/Mild You can select the type of Picture picture which best œ √ Mode Custom √ Adjust corresponds to your viewing Size : Normal requirements. ➢ You can select these options simply by Select Adjust Exit pressing the P.MODE button on the remote control. ◆ Adjust: Color Tone - Normal/Warm1/Warm2/ Cool1/Cool2 Contrast Brightness Sharpness Color Tint(NTSC only) The television has several Picture Adjust settings which allow you to Color Tone : Normal control the picture quality. Contrast 100 Brightness 50 ➢ If you make any Sharpness 50 Color 50 changes to these settings, the picture Select Adjust Exit mode is automatically switched to Custom. ◆ Size You can select the picture Picture size which best corresponds œ √ Mode Custom √ Adjust to your viewing Size : Normal requirements. It is variable depending on the model. ➢ You can change the Select Adjust Exit picture size simply by pressing the P.SIZE button on the remote control. Sound (depending on the model) Mode / Adjust / Auto Volume / Melody / Pseudo Stereo / Turbo Sound ◆ Mode: Custom/Standard/Music/Movie/Speech You can select the type of Sound special sound effect to be œ Mode Custom √ Adjust used when watching a given Auto Volume : Off broadcast. Melody : Off Pseudo Stereo : Off Turbo Sound : Off ➢ You can select these options simply by Select Adjust Exit pressing the S.MODE button on the remote control. √ ◆ Adjust: Bass Sound Treble Adjust Balance Bass 50 Treble 50 The television has several Balance L 50 R 50 settings which allow you to control the sound quality. Select Adjust Exit ➢ When the Mode is set to Custom, the Adjust menu is displayed. ➢ If you make any changes to these settings, the sound mode is automatically switched to Custom. ◆ Auto Volume Sound Each broadcasting station œ √ Custom Mode √ Adjust has its own signal conditions, Auto Volume : On Melody : Off and so it is not easy to adjust Pseudo Stereo : Off Turbo Sound : Off the volume every time the channel is changed. This Select Adjust Exit feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. continued... English - 6 ◆ Melody You can hear melody sound when the television is powered on or off. Sound œ Mode Custom √ Adjust Auto Volume : Off Melody : On Pseudo Stereo : Off Turbo Sound : Off Select Adjust √ Exit ◆ Pseudo Stereo Sound This feature converts a œ √ Mode Custom √ Adjust monaural sound signal into Auto Volume : Off two identical left and right Melody : Off Pseudo Stereo : On channels. Once the Pseudo Turbo Sound : Off Stereo is set to On or Off, Select Adjust Exit these settings apply to the sound effects such as Standard, Music, Movie, and Speech. ◆ Turbo Sound Sound This feature suitably œ √ Mode Custom √ Adjust emphasizes both higher and Auto Volume : Off Melody : Off lower bands of sound (and Pseudo Stereo : Off Turbo Sound : On includes other effects). You can enjoy more magnificent Select Adjust Exit and dynamic sound when watching music, movie, or other channels. ➢ You can change the options simply by pressing the TURBO button on the remote control. AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 7 Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. √ √ OSD Map Picture No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “I” button (On/Off) and the POWER button. ◆ Check the picture contrast and brightness settings. ◆ Check the volume. Normal picture but no sound ◆ Check the volume. ◆ Check whether the volume MUTE button on the remote control has been pressed. √ he Mode ✽ Adjust ✽ Auto Volume Melody ✽ Pseudo Stereo ✽ Turbo Sound ✽ Sound - Channel - Auto Store - Manual Store Blurred or snowy picture, distorted sound ◆ Check the direction, location and connections of your aerial. This interference often occurs due to the use of an indoor aerial. Remote control malfunctions ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check that the “+” and “-” ends of the batteries are inserted correctly. ◆ Check that the batteries are drained. - Mode - Adjust - Custom / Standard / Sports / Natural / Mild - Color Tone - Normal / Warm1 / Warm2 / Cool1 / Cool2 Contrast Brightness Sharpness Color Tint (NTSC only) - Size ✽ No picture or black and white picture ◆ Adjust the color settings. ◆ Check that the broadcast system selected is correct. Sound and picture interference ◆ Try to identify the electrical appliance that is affecting the television, then move it further away. ◆ Plug the television into a different mains socket. ✽ : It is variable depending on the model. - Custom / Standard / Music / Movie / Speech Bass / Treble / Balance Off / On Off / On Off / On Off / On - Color System ✽ Sound System ✽ Search Prog.No. Store - Clock Timer On time Off time - AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58 - B/G, I, D/K, M - Add/Erase - Fine Tune - Sort Function - Language ✽ - Time - Plug & Play - Blue Screen - Child Lock English - 7 - Off / On - Off / On AA68-03808A-00Eng_asia 8/16/06 9:57 AM Page 8 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project