User manual | null User manual

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS
APPLIANCE TO PAIN OR MOISTURE.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK.DO NOT REMOVE COVER
(OR BACK).NO USER SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightening flash with arrowead symbol,within an equilateral triangle,is intended the
alert the user to the presence of uninsulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Note:Where the mains plug is used as the disconnect device, the disconnect devices shall remain
readily operable.
Laser product symbol:located on the rear panel of the unit,indicate this player is a class laser
product,only use weak laser and no hazardous radiation outside of the unit.
1.Read through this instruction manual before installation and use.
2.Do not touch the power plug with wet hand.
3.Switch off the main power when the unit is not in use.(Disconnect the power plug from the
power outlet when you do not intend to use the unit for a prolonged period of time.) Before
moving the unit,remove the disc from the unit tray first.
4.Do not open the cover or touch any of the components exposed out of the unit,only for qualified
technicians.
5.Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid
damage the unit.
6.Do not place the unit in moist and humid conditions,which effect the pick-up of the unit lead to
out of work.
7.Place the unit on a flat surface and ventilative condition.Please ensure the ventilation holes
are not covered to avoid overheating and malfunction.
8. Clear the panel and case with soft dry cloth only,do not apply any king of thinner,alcohol
osprays.
9.The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids,such as vases,shall be placed on the apparatus
10.unplug the apparatus when not using for a long time oriented to disconnect from the Mains
power.
Macrovision:
This product incorporates copy right protection technology that is protected by method claims of
certain U.S patents and other intellectual property rights owned by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation.Reverse engineering or disassembly is prohibited.
DOLBY PRO LOGIC:
Manufactured under license from Dolby Laboratories.Dolby,Pro Logic and the double-D symbol
are trademarks of Dolby Laboratories.
GB-1
Contents
1.Precautions
3
2.Front Panel and Rear Panel Illustration
3
3.Remote Control
4
4.CD & Mp3 Playing
5
5.Kodak Picture CD Playback
5
6.Connecting a USB device
6
7.Connecting a memory card
6
8.System Setup
7-10
9.Troubleshooting
11
10.Technical Specification
12
GB-2
1.PRECAUTIONS
Before using this unit,be sure to read the applicable items of the operating instructions and these
safety suggestions carefully.Afterwards keep them handy for future reference.Take special care
to follow the wamings indicated on the unit itself as well as in the operating instructions.
Safety
Power Source-The unit should be connected to power supply only of the type described in the
operating instructions or as marked on the unit.
Environment
1. Water and moisture do not use this unit near water.For example,near a bathtub,wash
bowl,swimming pool,or the like,Damp basements should also be avoided.
2. Condensation-moisture may form on the lens in the following conditions.Immediately after a
heater has been turned on.In a steamy or very humid room.When the unit is suddenly moved
from a cold environment to a warm one,if moisture forms inside this unit,it may not operate
properly,to correct this Problem wait about one hour for the moisture to evaporate.
3. Heat never use or place this unit near a heat source.Do not leave it in an automobile exposed
to direct sun light for a long time with the doors and Windows closed as this may deform the
cabinet.
2.FRONT PANEL AND REAR PANEL ILLUSTRATION
GB-3
3.REMOTE CONTROL
19
1
20
21
2
22
23
24
25
3
4
5
26
6
7
27
8
9
10
11
12
13
14
15
16
17
18
28
29
30
31
32
33
34
35
1.STANDBY
2.NUMBER BUTTONS
3.GOTO
4.UP
5.MENU/PBC
6.ENTER
7.LEFT
8.DOWN
9.FAST REVERSE
10.FAST FORWARD
11.OSD
12.SETUP
13.STOP
14.PLAY/PAUSE
15.A-B REPEAT
16.REPEAT
17.HDMI
18.V-MODE
19.MUTE
20.OPEN/CLOSE
21.SOURCE
22.SUBTITLE
23.ANGLE
24.CLEAR
25.TITLE
26.PROGRAM
27.RIGHT
28.NEXT
29.PREVIOUS
30.ZOOM
31.SLOW
32.STEP
33.RETURN
34.AUDIO
35.VOLUME-/+
Using the Remote Control
Unless stated other wise,the remote control can operate all the features of the DVD
player,Always point the remote control directly at the remote sensor on the front of the DVD
Player not the TV.
Battery Installation
Remove the battery compartment lid on the rear of the remote control by sliding the lid down,then
off,place two AAA batteries inside the battery compartment with their and ends aligned as
indicated.Do not mix old and new batteries or different types of batteries Replace the battery
compartment lid.Slide the lid until you hear it click into place.
Note:
The button of SOURCE only workable while stop situation.
In stop state,you can press SOURCE key to choose card or USB.
GB-4
4.CD & Mp3 PLAYING
Mp3 is a method to compress the voice signal with a scale of 12:1 with international
standard MPEG layer 3 audio compressing mode.Adopting MP3 ,one disc can record modre than
600 minutes audio frequency or 170 songs ,with the similar timbre with CD.The player will
automatically play the first song (file) in the menu.You can use number keys to select your
favorite song (file).Press arrow keys to select the file,and The cursor will move at time,press
ENTER to confirm,the player will play this song selected by cursor in the file window.
PROG
1.Put in a MP3/CD format disc.
2.There is dit mode, at the right of the list, Press Enter to choose Edit mode, first, then press
Enter, to choose the song which need to program playing in the list, please move the cursor to
the add to program,at the right side, then press Enter,to confirm it, it's ok. Please move the
cursor to the program list to choose program playing.
3.To clear the program, it must be in the stop status and after chosen the song which need to
clear, then move the cursor to the Clear to program,then press Enter to confirm it, it's ok.
When playing DVD/VCD, press PROG button and the screen will display a info window. Then
press number buttons to input the program number that you want.
When it is finished, move the cursor to select the PLAY option, and the unit will start program
playback.
5.KODAK PICTURE CD PLAYBACK
The maximum size of JPEG picture that can be supported:3840x3840ples.
Operation instructions:
1. Press PAUSE key to stop playing.
2. Press PREV or NEXT key to select.
3. You can use number keys to select a special picture.
Image rotation
There are three modes to rotate a picture:90 cw,180 cw,90 ccw.Those operations are
Allowed only when a picture is being displayed normally and will be cancelled automatically when
a new picture is displayed.Press ANGLE repeatedly,you can select the different rotation
modes:Wipe down transition,wipe up transition,center in transition,center out transition and so
on.
Image zoom.press ZOOM key under any picture playback,may realize the picture zoom
function.Zoom in to :1X,2X,3X.
GB-5
6.Connecting a USB device
1)Power-on the unit.
2)Make sure no disc has been inserted inside the tray.
3)Insert a USB key inside the connector.
4)The DVD player will automatically read the multimedia files located on the USB key.
Notice:Depending on capacity of the device,the reading can take more then 1 minute before
lauching the video.
My player does not
recognize my USB
key or my external
hard disk when
plugged to the
DVD player's USB
slot
Would you please refer first to the instructions describing how to
use USB devices with this machine.
If the problem still occurs: This machine has been tested with the
majority of the market's Flash memory-based devices (USB keys
and MP3 players) and hard disks (MP3 / MPEG4 players with HDD).
However, this machine may not be compatible with certain devices,
in particular external self-powered hard disks.
7. Connecting a memory card
1)Power-on the unit.
2)Make sure no disc has been inserted inside the tray.
3)Insert a compatible memory card inside the connector.
4)The DVD player will automatically read the photos stored on the memory card.
Notice:Depending on capacity of the device,the reading can take more then 1 minute before
lauching the video.
Would you please refer first to the instructions describing how to use
memory cards with this machine.
My player does not
recognize my
Memory Card when
plugged to the DVD
player.
Also check that the card's format is compatible with the machine (eg.
SD / MS / MMC).
If the problem still occurs: This product has been tested with the
majority of the market's memory cards. However, because of the
vast numbers of cards put into the market, we cannot guarantee a
full compatibility with all the memory cards.
GB-6
8.SYTSTEM SETUP
DVD menu setup
Press the SETUP button on the remote control,the SETUP MENU(main) will be displayed.After
accessing the setup menu,press the direction buttons for up and down movement to select an
item desired,then press the ENTER button to confirm.
Press LEFT direction button return to the menu of upper level.To exit the setup,press
The SETUP button again.In the SETUP MENU,you may choose any of the following Iptions as
you like.
8.1 LANGUAGE SETUP
Select Language in the setup menu and display the Language submenu:
Central European
8.1.1 OSD Language
Use this item to select the language of the setup menu and screen display.
8.1.2 Subtitle
This option provides the preset subtitle language.
Follow the operating instructions stated in DVDMENU SETUP in combination with the desired
option.
8.1.3 MPEG4 Subtitle
MPEG4 Subtitle setting is used for choosing the language domain,(only for MPEG4).After select
one language domain (alphabet),when playback a Divx with extemal subtitle,the subtitle display
will use this language alphabet.if you find the displaying subtitle aren correctly,please ensure
the extemal subtitle language and select the correct language.
8.1.4 Audio
Follow the operating instructions stated in DVDMENU SETUP in combination with the desired
option.This option provides the built-in disc dubbing language options
8.1.5 DVD Menu
This option provides the films menu language options.
Follow the operating instructions stated in DVDMENU SETUP in combination with the desired
option.
8.2 VIDEO SETUP
Select Video in the setup menu,and display the Video submenu:
S-VIDEO/CVBS
GB-7
8.2.1 Aspect Ratio
4:3 :Choosing this setting if your DVD player is connected to a normal ratio TV.You can fill the
movie the entire screen of your TV.This might mean that parts of the picture
(the left and right edges) won not be seen.
16:9 :Choosing this setting if your DVD player is connected to a wide screen TV.If you
Choose this setting and you do not have a wide screen TV,the images on the screen may appear
distorted due to vertical compression.
Notes:
The image display ratio is related to the recorded disc format.Some disc can not display images
in the aspect.ratio you choose.If you play a disc recorded in 4:3 format on a wide screen TV,black
bars will appear on the left and right side of the screen.You must adjust the screen setting
depending on the type of the television you have.
8.2.2 View Mode
With this option you can select the different video vision mode on the screen.
8.2.3 TV System
This product supports output of various system,including NTSC,PAL.If your TV set has only
NTSC or PAL system,the screen will blink and become colorless when a wrong system is
selected.
8.2.4 Video Out
Selecting the Video Output setting to switch between different video outputs
S-Video/CVBS :Set the video output to S-Video and CVBS output.
Component:Set the video output to interlacing component output.
P-Scan:Set the video output to progressive component output
HD:Set the video output to high definition output
Note1:When the player is connected to a TV set of progressive scanning though YPbpr,select PSCAN.When it is connected to a common TV set,select Component.
If TV screen has no output after selecting P-SCAN,you can press V-MODE button to switch the
state,it will output normally.If you select HDMI connection,you should set up the play mode as
HD state,then it will output normally.
Note2: Set video output type to (Component) or (P-SCAN)
1.HD resolution menu should be disabled.
2.HDMI should stop working
3.HD JPEG mode menu should be disabled.
Note3:Set video output type to HD
1.HD resolution menu should be enabled and set to Auto responding to dis action.
2.HDMI key is valid to switch HD resolution only at this case.
3.HDMI module can work only at this case.
8.2.5 Smart Picture
To select different image brightness output mode
8.2.6 HD Resolution
Used to set the resolution of HDMI image output.In this option,you can select different HDMI
image resolution.
Note:If TV screen has no output after selecting HD Resolution,you can press SETUP once then
press V-MODE button or restart the player and press V-MODE btutton to switch the state,it will
output normally.
8.3 Auto setup
Select Audio in the setup menu,and display the Audio submenu.
Digital Output
GB-8
8.3.1 Bass Management
To enable or disable the Bass Management during operation of the player.
On = Enable the Bass Management.
Off = Disable the Bass Management.
8.3.2 Front Speaker
To adjust the front speakers output to work in harmony with the audio equipment (e.g.receiver,
speakers) connected to the player.
When Bass Management is On, the following options are available:
Large : Support signal frequency lower than 200Hz
Small : Support signal frequency higher than 200Hz
If the connected speaker supports signal lower than 200Hz, it is best to select
Large: If not, you shall select Small.
8.3.3 Center Speaker
Selection of Large or Small is same with that of front speaker. The speaker will have no signal
output if set to None.
Notes:
If the Subwoofer is On, Center is set to None or Small, and bass from the center channel is
redirected to the subwoofer. If the content contains a discrete subwoofer channel, it is also sent
to the subwoofer. If the Subwoofer is Off, Center is set to None or small, and bass from the center
channel is redirected to the left and right channels. If the content contains a discrete subwoofer
channel, it is discarded.
8.3.4 Surround Speaker
Selection of Large or Small is same with that of front speaker. The speaker will have no signal
output if set to None.
Notes:
If the Subwoofer is on, Surround is set to None or Small, and bass from the surround channels is
redirected to the subwoofer. If the content contains a discrete subwoofer channel, it is also sent
to the subwoofer.
If the Subwoofer is Off, Surround is set to None or Small, and bass from the surround channels is
redirected to the left and right channels. If the content contains a discrete subwoofer channel, it
is discarded.
8.3.5 Subwoofer
Selecting to enable/disable the subwoofer output when 6 Channel analog output is used.
The following options are available:
None Subwoofer is off. Bass from center and surround channels is redirected to the left and right
channels. If the content contains a discrete subwoofer channel, it is discarded.
Present Subwoofer is on. Bass from center and surround channels is redirected to subwoofer.
If the content contains a discrete subwoofer channel, it is also sent to the subwoofer.
Note:
Bass Management is not available for MP3 or WMA bitstream ; therefore, it will be disabled
during the playback of those streams.
8.3.6 Test Tones
Selecting the Test Tone setting allows the user to test the player's audio output on each speaker.
When you select channel, a short burst of pink noise will be sent to corresponding channel.
8.3.7 Center Delay
Selecting the Center Delay setting allows the user to enable/disable the center output delay.
8.3.8 Surr. Delay
Selecting the Surr. Delay setting allows the user to enable/disable the center output delay.
8.3.9 Digital output
Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to
work in harmony with the audio equipment(e.g.receiver,speakers) connected to the player.
Off:Digital audio output is disabled.
PCM:Select this option when you are going to use stereo signals(2 channels).You should
combine this option with the option Lower sampling rate,which we explain further on
All:If you select this option the player will use the DVD original audio track.Use this option when
you want to use the Dolby Digital AC3 signals through the optical or coaxial audio output.
Notice: In HDMI mode,Digital output is automatically set to Loclced PCM.
GB-9
8.3.10 Night Mode
8.3.11 Down Sampling
To enable or disable the down sampling during operation of the player
On: enable the Down Sampling this operation will set down Audio Sampling frequency
Off: disable the Down Sampling
8.3.12 Smart sound
8.4 RATING SETUP
Select<Rating> in the setup menu,and display the Rating submenu:
Note:Not all DVDs support ratings.
8.4.1 Parental Control
Selecting a Rating allows the user to set the parental control feature of the player select Parental
Control, and press ENTER to change the different mode.
Note: Unlock the password before setting Parental Control
8.4.2 Set Password
Use the 0-9 keys to input four digits(password),then press ENTER to confirm.
Note:If you forget your password,please use the universal password 8888 to unlock.
8.5 MISC SETUP
Select MISC in the setup menu,and display the submenu:
8.5.1 Use Default Settings
Reset setup data to factory default and re-load disc
8.5.2 Screen Saver:
On:Screen Saver function will be opened.
Off:Screen function will be closed.
GB-10
9.Troubleshooting
Please read the users manual carefully before using the DVD player.If you have any troubles in
using this player,try to solve the problems by the suggestions mentioned below.If you can not
remove the trouble after using all the suggestions,please contact the company or the technical
service center authoried by us.For the sake of your safety,please do not open the cover and
repair the player by yourself,if that,if may cause electric shock.
NO PICTURE,SOUND AND INDICATION
1.Ensure that the power switch is on.
2.Ensure that the wall inlet is ok.
3.Ensure that the power cord is not damaged.
4.Ensure that the power plug is connected to the inlet tightly.
NO SOUND BUT HAVE PICTURE
1.Ensure that the players audio output has a good connection with Tvs audio input.
2.Check whether the audio connector is damaged.
3.Check whether you have turned down the volume.
4.Ensure that you have set the right AUDIO setup of the player.
5.Ensure that you have turned your TV to the AV input channel connecting to your Player.
6.Ensure that the audio is not under mute.
NO PICTURE BUT HAVE SOUND
1.Ensure that the player s-video output has a good connection with TV s-video input.
2.Ensure that you have turned your TV to the AV input channel connecting to your player.
3.Check whether the video connector is damaged.
4.Ensure that you have set the right VIDEO settings of the player.
BLACK AND WHITE PICTURE OR SCREEN ROLLING
1.Ensure that you have set the right TV SYSTEM(e.g.PAL,NTSC)setting.
FLAWS OF PICTURE OR SOUND
1.Check whether the setting of AUDIO is right.
2.Check whether the disc is scratched or stained.
3.Check whether the AV connector and the output teminal is stained.
DISPLAY NO DISC
1.Ensure that you have put the disc on the tray.
2.Check whether the disc is put in the reverse side.
3.Check whether the disc is distorted.
4.Check whether the disc is stained or scratched badly.
DISPLAY BAD DISC
1.Check whether the disc has bad quality.
2.Ensure that the disc is not stained or damaged badly.
3.Ensure that the disc format is compatible to the player.
4.Ensure that the disc is not deformed.
REMOTE CONTROL IS INSENSITIVE OR DOES NOT WORK
1.Check the batteries of remote control and make sure that they are to be powerful and good
conductivity.
2.Direct the remote control to the IR sensor of the player.
3.Check whether whether there are some obstacles betwwn the remote control and IR sensor.
ABNORMAL FUNCTION OPERATION
1.Turn off the power,and then turn on again.
DISC IS LOCKED IN THE TRAY
1.The disc can not be taken out of the tray when the player is reading,so you have to turn off the
power and turn on again, and press OPEN/CLOSE key immediately to open the tray.
GB-11
10.Technical specifications
230V~
PEFERENCE:
To protect your DVD player,the interval be tween two consecutive Power button operations must
be above 30 seconds.
No using for a period of time,please pull out the plug from the electronic outlet.
The player should be operated only on condition that the type of power supply corresponds to the
marking label.Otherwise,it doesnot work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident,please power it on again.
Appearance and function is subject to change without notice.
GB-12

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project