advertisement
Monitor
User Manual
S22B560H
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
INSTALLING THE PRODUCT
Connecting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
USING THE PRODUCT
Setting the Optimal Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Product Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-5
Configuring Brightness and Contrast in the Initial Screen . . . . . . . . 3-6
INSTALLING THE SOFTWARE
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
MORE INFORMATION
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLD WIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Responsibility for the Pay Service (Cost to Customers) . . . . . . . . . . 6-4
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 6-5
1 Major Safety Precautions
1-1 Before You Start
Icons used in this manual
ICON NAME
Caution
MEANING
Indicates cases where the function may not work or the setting may be canceled.
Note Indicates a hint or tip to operate a function.
Using this Manual
• Make yourself fully aware of the safety precautions before using this product.
• If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright © 2011 Samsung Electronics Co., Ltd. All Rights Reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written permission of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
• An administration fee may be charged if either
• (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
• (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.
Major Safety Precautions 1-1
1-2 Custody and Maintenance
Securing the Installation Space
• Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
Install the product so the required distances shown in the figure are kept.
The appearance may differ depending on the product.
When installing the product with a wall-mount
About persistent images
• Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for a long time, set the power-saving mode or screen saver.
1-2 Major Safety Precautions
1-3 Cleaning the Monitor
Cleaning the Monitor
• The panel and exterior of the cutting-edge monitor scratch easily and require careful attention. Clean the monitor according to the following steps.
1. Power off the monitor and PC.
2. Disconnect the power cable from the monitor.
To avoid electric shock, be sure you disconnect the cable by gripping the plug and do not touch the cable with wet hands.
Wipe the monitor screen using a clean, soft, dry cloth.
• Do not use a cleaning agent that contains surfactant, alcohol, or solvents.
Otherwise, the exterior may discolor or crack or the panel coating may come off.
• Do not spray water or cleaning agent directly onto the monitor.
Otherwise, the liquid may sink into the monitor and cause a fire, electric shock, or failure.
4. Clean the exterior of the monitor using a soft cloth dampened with a small amount of water.
5. Connect the power cable to the monitor after you have finished cleaning.
6. Power on the monitor and PC.
Precautions for Storage
• Using an ultrasonic humidifier may cause white stains on a highly glossy product.
Be sure you contact the nearest service center (paid service) for cleaning the inside of the monitor.
Major Safety Precautions 1-3
1-4 Safety Precautions
Icons used for safety precautions
ICON NAME
Warning
Caution
MEANING
Failing to follow the precautions marked with this sign, may result in a serious injury or even a fatality.
Failing to follow the precautions marked with this sign, may result in a personal injury or property damage.
Meaning of Signs
Do not perform.
Do not disassemble.
Do not touch.
Must be followed.
The power plug must be unplugged from the wall outlet.
Must be grounded to prevent electric shock.
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord or plug or a loose power outlet.
• Otherwise, it may result in electric shock or fire.
Avoid plugging in or unplugging the power supply with wet hands.
• Otherwise, it may result in electric shock.
Make sure to connect the power cord to a grounded wall outlet (for insulation class 1 equipment only).
• Otherwise, it may result in electric shock or injury.
Keep the power cord and the product away from a heater.
• Otherwise, it may result in electric shock or fire.
Avoid connecting multiple electric appliances to a single wall outlet.
• Otherwise, it may result in fire due to overheating of the wall outlet.
Plug the power plug in firmly.
• Otherwise, it may result in fire.
Avoid bending or twisting the power cord excessively and avoid placing heavy objects on the cord.
• Otherwise, it may result in electric shock or fire due to a damaged power cord.
If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry cloth.
• Otherwise, it may result in fire.
1-4 Major Safety Precautions
Caution
Avoid unplugging the power plug while the product is operating.
• Otherwise, it may damage the product due to electric shock.
When unplugging the power plug from the wall outlet, make sure to hold it by the plug and not by the cord.
• Otherwise, it may result in electric shock or fire.
Installation Related
Warning
AVOID PLACING BURNING CANDLES,
MOSQUITO-REPELLENT OR CIGA-
RETTES ON THE PRODUCT AND
INSTALLING THE PRODUCT NEAR A
HEATER.
• Otherwise, it may result in fire.
Avoid installing the product in a badly-ventilated location such as inside a bookshelf or closet.
• Otherwise, it may result in fire due to internal over-heating.
Keep the plastic bags used to pack the product away from children.
• If children place the plastic bags over their heads, they may suffocate.
Make sure to use only the power cord supplied by Samsung. In addition, do not use the power cord of another electric appliance.
• Otherwise, it may result in electric shock or fire.
Connect the power plug to a wall outlet that can be easily reached.
• When a problem occurs with the product, you must unplug the power plug to cut the power off completely. You cannot cut the power off completely using only the power button on the product.
Ask an installation engineer or relevant company to install the product onto a wall.
• Otherwise, it may result in injury.
• Make sure to use the specified wall mount.
Keep a distance of at least 4 inches (10 cm
) from the wall when installing the product for ventilation.
• Otherwise, it may result in fire due to internal over-heating.
Avoid installing the product in a location that is unstable or exposed to excessive vibrations such as on an unstable or slanted shelf.
• The product may fall and this may result in damage to the product or injury.
• If you use the product in a location exposed to excessive vibrations, it may result in a problem with the product or fire.
Major Safety Precautions 1-4
1-4
Avoid installing the product in a location exposed to dust, moisture (sauna), oil, smoke or water (rain drops) and installing it within a vehicle.
• This may result in electric shock or fire.
Avoid installing the product at a height where children may reach it.
• If a child touches the product, the product may fall and this may result in injury.
• Since the front part is heavier, install the product on a flat and stable surface.
Caution
Do not let the product drop while moving it.
• This may result in a problem with the product or injury.
When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the console or shelf.
• Otherwise, this may cause the product to fall off and result in a malfunction or injury.
• Make sure to use a cabinet or shelf suitable to the size of the product.
If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting one of our service engineers about the matter.
• Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time and so on.
Avoid installing the product in a location exposed to direct sunlight or heat source such as a fire or heater.
• This may shorten the product life cycle or cause fire.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
Do not place the product face down on the floor.
• This may damage the panel of the product.
When putting the product down, handle it gently.
• Otherwise, it may result in a problem with the product or injury.
Major Safety Precautions
Usage Related
Warning
Since a high voltage runs through the product, never disassemble, repair or modify the product yourself.
• Otherwise, it may result in fire or electric shock.
• If the product needs to be fixed, contact a service center.
If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service center.
• Otherwise, it may result in electric shock or fire.
If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service center.
• Otherwise, it may result in fire or electric shock.
During a lightning or thunderstorm, power off the product and remove the power cable.
• Otherwise, it may result in electric shock or fire.
Avoid moving the product by pulling the power cord or antenna cable.
• Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.
Avoid lifting up or move the product by holding only the power cord or signal cable.
• Otherwise, it may result in electric shock, fire or a problem with the product due to damage to the cable.
Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.
• Otherwise, the power cord may be damaged and a fire or electric shock may result.
Avoid letting children to hang or climb onto the product.
• Otherwise, it may result in the product falling and this may result in injury or death.
Avoid placing objects such as toys and cookies on top of the product.
• If a child hangs over the product to grab an object, the object or the product may fall and this may result in injury or even death.
Avoid dropping an object over the product or cause impact to the product.
• Otherwise, it may result in electric shock or fire.
When a gas leak occurs, do not touch the product or the power plug and ventilate immediately.
• A spark may result in an explosion or fire.
Avoid using or placing inflammable spray or objects near the product.
• This may result in an explosion or fire.
Major Safety Precautions 1-4
Take care not to block the vent by a table cloth or curtain.
• Otherwise, it may result in fire due to internal overheating.
1-4
Avoid placing a liquid container such as a vase, flowerpot, beverage, cosmetics or drugs, or a metal object over the product.
• If water or an alien substance enters the product, turn the power off, unplug the power cord and contact a service center.
• Otherwise, it may result in a problem with the product, electric shock or fire.
Caution
Displaying a still image for a long time may create a persistent image or stain on the screen.
• If you do not use the product for a long time, use the power-saving mode or set the screensaver to the moving picture mode.
Set the appropriate resolution and frequency for the product.
• Otherwise, it may result in eye strain.
Do not place the adapter on top of another adapter.
• Otherwise, it may result in fire.
Remove the vinyl cover of the adapter before using the adaptor.
• Otherwise, it may result in fire.
Be careful that adaptor should not be in contact with water and therefore not be wet.
• This may cause a malfunction, electric shock or fire. Do not use adaptor by the waterside or outside particularly when it rains or snows. Be careful that adaptor should not be wet while cleaning floor with water.
Avoid using a humidifier or cooker near the product.
• Otherwise, it may result in electric shock or fire.
Avoid inserting metal objects such as a chopsticks, coins or hairpins, or inflammable objects into the product (the vents, ports, etc).
• If water or an alien substance enters the product, turn the power off, unplug the power cord and contact a service center.
• Otherwise, it may result in a problem with the product, electric shock or fire.
When not using the product for a long time such as leaving your home, unplug the power cable from the wall outlet.
• Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock.
Avoid turning the product upside down or move the product holding only the stand.
• This may cause the product to fall resulting in damage to the product or injury.
Keep power adaptor away from any other heat source.
• Otherwise, it may result in fire.
Always keep power adaptor in well-ventilated area.
Watching the product from too close a distance continuously may damage your eyesight.
It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time.
• This will alleviate any eye strain.
Major Safety Precautions
Since the display panel is hot after using it for a long time, do not touch the product.
Keep small accessories away from the children.
Take care when adjusting the angle of the product or the height of the stand.
• If your hand or finger is caught, you may be injured.
• If the product is tilted excessively, the product may fall and this may result in injury.
Avoid placing a heavy object over the product.
• Otherwise, it may result in a problem with the product or injury.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm(18~ 20inches) from your eyes to the screen. Look down at the screen and face the screen forwards.
• Adjust the angle of the product so that light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart.
Major Safety Precautions 1-4
2 Installing the Product
2-1 Package Contents
• Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product at a later stage.
Monitor
CONTENTS
Quick Setup Guide Warranty Card
(Not available in all locations)
User Manual
Stand Connector DC-Adapter
OPTION
Power Cord
HDMI Cable HDMI to DVI Cable D-Sub Cable
The cables provided may vary depending on the product you purchase.
Stand
2-1 Installing the Product
2-2 Installing the Stand
Before assembling the product, put the product down on a flat and stable surface (table, etc.) with the screen facing down.
Lay a soft blanket on the table for protection. Next, place the product with the screen facing down onto the blanket.
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
Installing the Product 2-2
- Caution
Never lift the product by holding only the stand.
More force may be required to detach the stand from the product than when it was attached.
2-2 Installing the Product
2-3 Connecting the monitor
Connecting with a PC
The connecting part may differ depending on the product model.
1. Connect the product to a PC depending on the video output supported by the PC.
• When the graphics card provides D-Sub (<Analog>) output
• Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
• When the graphics card provides DVI(<Digital>) output
• Connect the [HDMI IN] port of the product to the [DVI] port on your PC using the HDMI to DVI cable.
The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
2. Connect the power adapter to [DC] jack on the rear of the product. Connect the power cord to the adapter and wall socket.
Installing the Product 2-3
(The input voltage is switched automatically.)
When the product is connected to a PC, you can turn the product on and use it.
3. Cables can be fixed as shown.
Connecting with a Video Device
Connect the HDMI output port of your digital output device to the [HDMI IN] port of the product using the HDMI cable.
The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
2-3 Installing the Product
2-4 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device for more information.
You must purchase the Kensington Lock separately.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as a desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the Monitor( ).
4. Lock the lock( ).
• These are general instructions. For exact instructions, see the User Manual supplied with the locking device.
• You can purchase the locking device from an electronics store, an online shop, or our service center.
Installing the Product 2-4
3 Using the product
3-1 Setting the Optimal Resolution
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
Select a language on the product and change the resolution on your PC to the optimum setting.
▲/▼ : You can select a language with these buttons.
MENU : If you press this button, the message disappears.
• The message appears up to 3 times if the resolution has not been set to the optimal resolution.
• To set the resolution to the optimal resolution
• When the PC is turned off, connect the product and the PC and turn the power on.
• Right-click over the Desktop and select 'Properties' from the pop-up menu.
• In the 'Settings' tab, set the resolution to the optimal resolution.
• For the optimal resolution, refer to the Specifications.
3-1 Using the product
3-2 Standard Signal Mode Table
This product delivers the best picture quality when viewed under the optimal resolution setting. The optimal resolution is dependent on the screen size.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
For the optimal resolution, refer to the Specifications.
S22B560H
DISPLAY MODE
IBM, 720 x 400
MAC, 640 x 480
MAC, 832 x 624
MAC, 1152 x 870
VESA, 640 x 480
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 720
VESA, 1280 x 800
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1440 x 900
VESA, 1600 x 900
VESA, 1680 x 1050
VESA, 1920 x 1080
HORIZONTAL
FREQUENCY (KHZ)
37.879
48.077
46.875
48.363
56.476
60.023
67.500
45.000
31.469
35.000
49.726
68.681
31.469
37.861
37.500
35.156
49.702
63.981
79.976
55.935
60.000
65.290
67.500
VERTICAL
FREQUENCY (HZ)
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
70.087
66.667
74.551
75.062
59.940
72.809
75.000
56.250
59.810
60.020
75.025
59.887
60.000
59.954
60.000
40.000
50.000
49.500
65.000
75.000
78.750
108.000
74.250
28.322
30.240
57.284
100.000
25.175
31.500
31.500
36.000
83.500
108.000
135.000
106.500
108.000
146.250
148.500
PIXEL CLOCK (MHZ)
SYNC POLARITY (H/
V)
-/-
+/+
+/+
+/+
+/+
+/+
+/+
-/-
-/-
-/-
-/-
+/+
-/+
-/-
-/-
-/-
+/+
-/+
+/+
-/+
+/+
+/+
-/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
Using the product 3-2
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-2 Using the product
3-3 Installing the Device Driver
If the device driver is installed, you can set the resolution and frequency to the optimal configuration for the product. The device driver is included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or Samsung Electronics website(http://www.samsung.com/), and download the driver.
1. Insert the driver installation CD-ROM into the CD-ROM drive.
2. Click on "Windows Driver".
3. Complete the remaining installation steps according to the instructions displayed on the screen.
4. Select the model of your product from the model list.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system.
Using the product 3-3
3-4 Product Operating Buttons
Product Operating Buttons
• Press one of the buttons on the monitor. OSD Guide will appear on the screen.
• If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the menu for the pressed button appears.
• To go to the menu, press the button on the front of the monitor again.
• OSD Guide may vary according to functions and models. Please refer to actual product.
ICON
MENU
DESCRIPTION
▲/▼
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person
On: If you press and hold the MENU button down for 10 seconds, the OSD Adjustment Lock function is activated.
Off: If you press and hold the MENU button down for 10 seconds again, the OSD Adjustment
Lock function is disabled.
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ].
Users can set the <Customized Key> to one of the following functions. If the user presses the
Customized Key [ ] after setting it, the configured function will be performed
• < Angle> - < Bright> - <Eco Saving> - <Image Size>
• You can set the function of the Customized Key by selecting <SETUP&RESET > ->
<Customized Key> in the OSD.
• The function of the customized key can be changed by pressing the button in the customized key window.
Use these buttons to navigate the menu or to adjust a value in the OSD.
Use this button to control the brightness of the screen.
3-4 Using the product
ICON
AUTO
DESCRIPTION
Use this button to select a function.
If you press the [ ] button when there is no OSD, the input signal (Analog/HDMI) is switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen.
Press [AUTO] button to adjust the screen settings automatically
This function is only available in Analog mode.
If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed.
Press this button to turn the product on or off
• The buttons on the right of the product are touch-type buttons.
• Touch the buttons lightly with your finger.
Power LED
This LED is turned on when the product works normally.
For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption.
Using the product 3-4
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
TOP MENUS
PICTURE
COLOR
SIZE & POSI-
TION
SETUP&RESET
Brightness
Coarse
Gamma
H-Position
Reset
Color
PC/AV Mode
Menu Transparency
Contrast
Fine
Red
V-Position
Language
Key Repeat Time
SUB MENUS
Sharpness
Response Time
Green
Bright
HDMI Black Level
Blue
Angle
Color Tone
Image Size Menu H-Position Menu V-Position
Eco Saving
Customized Key
Off Timer On/Off
Auto Source
Off Timer Setting
Display Time
INFORMA-
TION
Monitor functions may vary according to models. Please refer to actual product.
PICTURE
3-5
MENU
Brightness
Contrast
DESCRIPTION
Controls the screen brightness.
• This menu is unavailable when < Bright> is set to <Dynamic Contrast> mode.
• This menu is unavailable when <Eco Saving> is set.
Controls the contrast of the pictures displayed on the screen
• This menu is unavailable when < mode.
• This menu is unavailable when <
Bright> is set to <Dynamic Contrast> or <Cinema>
Color> is set to <Full> mode or <Intelligent> mode.
Using the product
MENU
Sharpness
Bright
DESCRIPTION
Controls the clarity of details of pictures displayed on the screen
• This menu is unavailable when < mode.
Bright> is set to <Dynamic Contrast> or <Cinema>
• This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode.
Provides preset picture settings optimized for various user environments such as editing a document, surfing the Internet, playing games,or movies and so on.
• <Custom>
If the preset picture modes are not sufficient, users can configure the <brightness> and
<Contrast> directly using this mode.
• <Standard>
This mode provides the picture setting appropriate for editing a document and surfing the Internet
(text + picture).
• <Game>
This mode provides the picture setting appropriate for playing games that include lots of graphics and that require a fast screen refresh rate.
• <Cinema>
This mode provides brightness and sharpness settings similar to those of a TV for the best entertainment environment (movie, DVD, etc.).
• <Dynamic Contrast>
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
When the external input is connected through HDMI and <PC/AV Mode> is set to <AV>,
< Bright> has four automatic picture settings (<Dynamic>, <Standard>, <Movie> and <Custom>) that are preset at the factory. You can activate either Dynamic, Standard, Movie or Custom.
You can select Custom which automatically recalls your personalized picture settings.
• <Dynamic>
Select this mode to view a sharper image than in Standard mode.
• <Standard>
Select this mode when the surroundings are bright. This also provides a sharp image.
• <Movie>
Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
• <Custom>
Select this mode when you want to adjust the image according to your preferences.
This menu is unavailable when < Angle> or <Eco Saving> is set.
Using the product 3-5
3-5
MENU
Angle
DESCRIPTION
This feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front.
Set to <Off> when viewing directly in front of the screen.
• <Off> - Select when viewing from the front position.
• <Lean Back Mode1> - Select when viewing from a slightly lower position.
• <Lean Back Mode2> - Select when viewing from the lower position.
• <Standing Mode> - Select when viewing from the upper position.
• <Side Mode> - Select when viewing from the left or right position.
• <Group View> - Select when two or more persons view among , , position at the same time.
• <Custom> - When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default.
Users can set suitable picture quality as needed.
Coarse
Fine
• This menu is unavailable when < mode.
• This menu is unavailable when <
Bright> is set to <Dynamic Contrast> or <Cinema>
Color> is set.
Removes vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu.
This function is only available in Analog mode.
Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again.
This function is only available in Analog mode.
Using the product
MENU
Response Time
HDMI Black Level
DESCRIPTION
Accelerates the response time of the panel faster than the original response time so that moving pictures appear sharper and more natural.
• <Normal>
• <Faster>
• <Fastest>
• It is recommended setting the <Normal> or <Faster> when not viewing a movie.
• Monitor functions may vary according to models. Please refer to actual product.
• User can choose the optimal mode from <Normal> / <Faster> / <Fastest> ,according to the different input video signal.
When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterioration (black level, lower-quality contrast, lighter color tone, etc.) may occur depending on the connected external device.
• <Normal>
• <Low>
This function is active only when the external device is connected via <HDMI>. The <HDMI
Black Level> function may not be compatible with all external devices.
COLOR
MENU
Color
Red
Green
DESCRIPTION
Expresses natural colors more clearly without changing the picture quality using proprietary digital picture quality improvement technology developed by Samsung Electronics.
• <Off> - Turns the < Color> function off.
• <Demo> - You can compare the pictures processed by < Color> with the original pictures.
• <Full> - Provides a clearer picture including areas corresponding to skin color.
• <Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color.
This menu is unavailable when < Angle> is set.
You can adjust the red color value of pictures according to your preference.
This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode.
You can adjust the green color value of pictures according to your preference.
This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode.
Using the product 3-5
MENU
Blue
Color Tone
Gamma
DESCRIPTION
You can adjust the blue color value of pictures according to your preference.
This menu is unavailable when < Color> is set to <Full> mode or <Intelligent> mode.
You can set the color temperature according to your preference.
• <Cool 2> - Sets the color temperature of the screen to very cool.
• <Cool 1>- Sets the color temperature of the screen to cool.
• <Normal> - Sets the color temperature of the screen to the standard color temperature.
• <Warm 1> - Sets the color temperature of the screen to warm.
• <Warm 2> - Sets the color temperature of the screen to very warm.
• <Custom> - Select this menu to set the color temperature manually.
If you do not like the preset color temperatures, you can manually adjust the value of RGB.
When the external input is connected through HDMI and <PC/AV Mode> is set to <AV>, <Color
Tone> has four color temperature settings (<Cool>, <Normal>, <Warm> and <Custom>).
• This menu is unavailable when <
• This menu is unavailable when <
Color> is set to <Full> mode or <Intelligent> mode.
Angle> is set.
Using this menu, you can change the intensity of the colors of medium brightness.
• <Mode1> - <Mode2> - <Mode3>
This menu is unavailable when < Angle> is set.
(This is unavailable when <
SIZE & POSITION
Bright> is set to <Dynamic Contrast> and <Cinema> mode.)
3-5 Using the product
MENU
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
DESCRIPTION
Moves the position of the display area on the screen horizontally.
• This function is only available in Analog mode.
• When a 720P, 1080i or 1080P signal is input in AV mode ,select <Screen Fit >to adjust horizontal position in 0-6 levels.
Moves the position of the display area on the screen vertically.
• This function is only available in Analog mode.
• When a 720P, 1080i or 1080P signal is input in AV mode ,select <Screen Fit >to adjust horizontal position in 0-6 levels.
Supplied for the wide models only such as 16:9 or 16:10.
PC signals
• <Auto> - The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
• A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether the
<Image Size> is set to <Auto> or <Wide>.
AV signals
• <4 : 3> - Displays pictures at the 4:3 aspect ratio.
• <16 : 9> - Displays pictures at the 16:9 aspect ratio.
• <Screen Fit> - If a 720P or 1080P signal is input in HDMI input mode, the picture is displayed as is without truncation.
This can only be set when the external input is connected through HDMI and <PC/AV Mode> is set to <AV>.
You can adjust the horizontal position of the OSD.
You can adjust the vertical position of the OSD.
SETUP&RESET
Using the product 3-5
MENU DESCRIPTION
Use this function to restore the visual quality and color settings to the factory defaults.
• <Yes> - <No>
Reset
3-5
Select a language for the OSD.
Language
Eco Saving
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Customized Key
The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC.
This function provides user a low power mode which is realized by lowering the current of the display panel.
• <75%>
When <75%> is selected, the power consumption is about 75% of default setting.
• <50%>
When <50%> is selected, the power consumption is about 50% of default setting.
• <Off>
When <Off> is selected, the function is turned Off .
This menu is unavailable when <
You can turn the Off Timer on or off.
• <Off> - <On>
Bright> is set to <Dynamic Contrast> mode.
Turns the power off automatically when the configured time is reached.
• When <On> of <Off Timer On/Off> is selected,This function is available only.
• For products for the market in Europe, the <Off Timer On/Off> is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to MENU → <SETUP&RESET> and set <Off Timer On/Off> to <Off>.
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
• This function does not support Analog mode.
• Supplied for the wide models only such as 16:9 or 16:10.
• If the monitor (when set to Digital) is in power saving mode or is displaying the message
<Check Signal Cable>, press the MENU button to display the On Screen Display (OSD).
You can select <PC> or <AV>.
Controls the repeat delay of a button.
You can set to <Acceleration>, <1 sec> or <2 sec>. If <No Repeat> is selected, the button only responds once.
You can set the function of the Customized Key to one of the following.
• < Angle> - < Bright> - <Eco Saving> - <Image Size>
Using the product
MENU
Auto Source
Display Time
Menu Transparency
DESCRIPTION
• <Auto> - The monitor automatically selects an input signal.
• <Manual> - Users have to manually select an input signal.
Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models.
The OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
• <5 sec> - <10 sec> - <20 sec> - <200 sec>
You can select the transparency of the OSD.
• <Off> - <On>
INFORMATION
MENU
INFORMATION
DESCRIPTION
Shows the frequency and resolution set on the PC.
Using the product 3-5
3-6 Configuring Brightness and Contrast in the Initial Screen
Adjust the Brightness or Contrast setting using the [ ] buttons in the initial screen (where no OSD menu is displayed).
1. Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ].
The following screen will appear.
2. Press the [ ] button to alternate between the Brightness and Contrast settings.
3. Adjust the Brightness or Contrast setting using the [ ] buttons.
3-6 Using the product
4 Installing the Software
4-1 Natural Color
What is Natural Color ?
This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install; http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
Installing the Software 4-1
4-2 MagicTune
What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines.
Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MagicTune setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MagicTune setup file on the CD-ROM.
3. Select the installation language and click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
• The software may not work properly if you do not restart the computer after the installation.
• The MagicTune icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment.
System Requirements
OS
• Windows XP, Windows Vista, Windows 7, Windows 8
Removing the Software
You can only remove MagicTune™ through [Add or Remove Programs ] in Windows.
To remove MagicTune™, complete the following steps.
1. Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2. Double-click the [Add or Remove Programs] icon in the Control Panel.
3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
4. Click [Change or Remove Programs] to remove the software.
5. Select [Yes] to start removing MagicTune™.
6. Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™, please visit our website.
4-2 Installing the Software
4-3 MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MultiScreen setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
3. When the Installation Wizard appears, click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
• The software may not work properly if you do not restart the computer after the installation.
• The MultiScreen icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MultiScreen)
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.
Operating System
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista 32Bit
• Windows 7 32Bit
• Windows 8 32Bit
For MultiScreen, the operating systems Windows 2000 or later is recommended.
Hardware
• At least 32MB of memory
• At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select MultiScreen from the program list and click the [Add/Delete] button.
Installing the Software 4-3
5 Troubleshooting
5-1 Monitor Self-Diagnosis
• You can check if the product is working properly using the Self-Diagnosis function.
• If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform the self-diagnosis function according to the procedures below.
1. Turn the product and the PC off.
2. Separate the signal cable from the product .
3. Turn the product on.
4. If the product is working properly, the <Check Signal Cable> message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product is working properly.
5-1 Troubleshooting
5-2 Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON
Is the power cord connected properly?
Is the <Check Signal Cable> message displayed on the screen?
Is the <Not Optimum Mode> message displayed on the screen?
Is a blank screen displayed and does the power LED blink at a 1 second interval?
Did you connect with a DVI cable?
Blank spaces are found at the top and bottom of the screen when an [HDMI] or [HDMI-DVI] cable is connected to the monitor and PC.
Check the connection status of the power cord.
(Connected using the D-sub cable)
Check the cable connecting the PC and the product.
(Connected using the DVI cable)
If the message appears on the screen even if the cable is properly connected, recheck the input signal by pressing the [
] button of the product.
This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product.
In this case, set up the appropriate resolution and the frequency for the product.
1. This occurs when the power saving function is running.
If you click the mouse or press any key, the screen will be turned on.
2. If the <Check Signal Cable> condition persists for more than five minutes, the power saving function will be activated.
If you connect the DVI cable when the PC has booted up or if you reconnect the DVI cable after disconnecting the cable while using a PC, the screen may not be displayed because some graphics cards do not output the video signal.
In this case, reboot the PC while the DVI cable is connected.
Blank spaces on the screen are not caused by the monitor.
The cause of the problem is the PC or graphics card, and can be fixed by adjusting the screen size in the HDMI or DVI option of the graphics card settings menu.
If the graphics card settings menu has no option to adjust the screen size, update the graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for details on how to adjust the screen settings.)
THE IMAGE IS TOO LIGHT OR TOO DARK.
Adjust the <Brightness> and <Contrast>.
(Refer to the <Brightness>, <Contrast>)
The display brightness can differ according to the mode set for <
If <
Angle>.
Bright> is set to <Dynamic Contrast>, the display brightness can differ according to the input signal.
THE ON SCREEN ADJUSTMENT MENU (OSD) DOES NOT APPEAR.
Did you cancel the screen adjustment?
Check if the OSD Adjustment Lock function is set to Off.
Troubleshooting 5-2
THE COLOR IS WEIRD / THE PICTURE IS DISPLAYED IN BLACK AND WHITE
Is the entire screen displayed in the same color as if viewing the screen through a cellophane paper?
Is the graphics card configured correctly?
Check the cable connection to the computer.
Reinsert the graphics card into the computer completely.
Set up the graphics card referring to the user manual.
THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER.
Did you change the graphics card or the driver?
Did you change the resolution and frequency appropriate to the product?
Is the graphics card configured correctly?
Please press the [AUTO] button to run the auto adjustment function.
Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table)
Set up the graphics card referring to the user manual.
THE PICTURES ARE OUT-OF-FOCUS.
Did you change the resolution and the frequency appropriate to the product?
Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table)
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE
GRAPHICS CARD.
Did you install the device driver for the product?
Is the graphics card configured correctly?
Windows XP : Set the color again by selecting Control Panel
→ Appearance and Themes → Display → Settings.
Windows ME/2000 : Set the color again by selecting Control
Panel → Display → Settings.
Windows Vista : Change the color settings by selecting Control Panel → Appearance and Personalization → Personalization → Display settings.
Windows 7 : Change the color settings by selecting Control
Panel → Appearance and Personalization → Display →
Adjust resolution → Advanced settings → Monitor.
Windows 8 : Change the color settings by selecting Settings
→ Control Panel → Appearance and Personalization → Display → Adjust resolution → Advanced settings → Monitor.
(For more information, refer to the Windows user manual for the computer.)
Configure the color again in accordance with the new graphics card driver.
WHEN I CONNECT THE MONITOR, THE 'UNKNOWN MONITOR, PLUG&PLAY (VESA DDC) MONITOR FOUND'
MESSAGE IS DISPLAYED.
Did you install the device driver for the product?
Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card.
Install the device driver referring to the descriptions about the driver installation.
Install the device driver referring to the descriptions about the driver installation.
WHEN I LOOK AT THE EXTERIOR EDGES OF THE PRODUCT, SMALL ALIEN SUBSTANCES APPEAR ON IT.
Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges, such things may be seen. This is not a defect of the product.
A “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTER.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
5-2 Troubleshooting
5-3 FAQ
FAQ!
How can I change the frequency?
PLEASE TRY THE FOLLOWING!
You have to change the frequency of the graphics card.
Windows XP : Change the frequency by selecting Control
Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor, and then change the refresh rate under
Monitor Settings.
Windows ME/2000 : Change the frequency by selecting Control Panel → Display → Settings → Advanced → Monitor, and then change the refresh rate under Monitor Settings.
Windows Vista : Change the frequency by selecting Control
Panel → Appearance and Personalization → Personalization
→ Display settings → Advanced settings → Monitor, and then change the refresh rate under Monitor Settings.
Windows 7 : Change the frequency by selecting Control Panel
→ Appearance and Personalization → Display → Adjust resolution → Advanced settings → Monitor, and then change the refresh rate under Monitor Settings.
Windows 8 : Change the frequency by selecting Settings →
Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced settings → Monitor, and then change the refresh rate under Monitor Settings.
(For more information, refer to the User Manual of the computer or the graphics card.)
Troubleshooting 5-3
FAQ!
How can I change the resolution?
How can I use the power saving function?
PLEASE TRY THE FOLLOWING!
Windows XP : Change the resolution by selecting Control
Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 : Change the resolution by selecting Control Panel → Display → Settings.
Windows Vista : Change the resolution by selecting Control
Panel → Appearance and Personalization → Personalization
→ Display settings.
Windows 7 : Change the resolution by selecting Control Panel
→ Appearance and Personalization → Display → Adjust resolution.
Windows 8 : Change the resolution by selecting Settings →
Control Panel → Appearance and Personalization → Display
→ Adjust resolution.
(For more information, refer to the User Manual of the computer or the graphics card.)
Windows XP : Configure it by selecting Control Panel →
Appearance and Themes → Display → Screen Saver Setting or configure it in the BIOS Setup of the computer.
Windows ME/2000 : Configure it by selecting Control Panel →
Display → Screen Saver Setting or Configure it in the BIOS
Setup of the computer.
Windows Vista : Change settings by selecting Control Panel
→ Appearance and Personalization → Personalization →
Screen Saver. You can also use the BIOS SETUP menu on the PC.
Windows 7 : Change settings by selecting Control Panel →
Appearance and Personalization → Personalization →
Screen Saver. You can also use the BIOS SETUP menu on the PC.
Windows 8 : Change settings by selecting Settings → Control
Panel → Appearance and Personalization → Personalization
→ Screen Saver. You can also use the BIOS SETUP menu on the PC.
(For more information, refer to the User Manual of the computer or the graphics card.)
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
5-3 Troubleshooting
6 More Information
6-1 Specifications
Panel
MODEL NAME
Size
Display area
Synchronization
Pixel Pitch
Horizontal
Vertical
Display Color
Resolution Optimum resolution
Maximum resolution
Input Signal, Terminated
Maximum Pixel Clock
Power Supply
Signal Cable
Dimensions (WxHxD) / Weight
Environmental considerations
Tilt
Operating
Storage
S22B560H
21.5 inches (54 cm)
476.64 mm(H) x 268.11 mm(V)
18.77 inches (H) x 10.56 inches (V)
0.24825 mm (H) x 0.24825 mm (V)
30 ~ 81 kHz
56 ~ 75 Hz
16.7M
1920x1080@60Hz
1920x1080@60Hz
RGB Analog, HDMI(High Definition Multimedia Interface)
0.7 Vp-p ± 5% separate H/V sync, Composite, SOG
TTL level (V high ≥ 2.0V, V low ≤ 0.8V)
164MHz (Analog,HDMI)
This product supports 100-240 V.Since the standard voltage may differ from country to country, please check the label on the back of the product.
15pin-to-15pin D-sub cable, Detachable
HDMI to DVI Cable, Detachable
HDMI Cable, Detachable
527.2 x 325.5 x 52.2 mm / 20.76 x 12.81 x 2.06 inches (Without Stand)
527.2 x 399.7 x 179.6 mm / 20.76 x 15.74 x 7.07 inches (With Stand) / 2.9 kg /
6.4 Ibs
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity :10 % ~ 80 %, non-condensing
Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
-1.0°(±2.0°) ~20.0°(±2.0°)
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter ordarker on the panel. This does not affect product performance.
More Information 6-1
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website, www.samsung.com/recyclingdirect, or call (877) 278 - 0799
6-1 More Information
6-2 Power Saving Function
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.
STATE
Power Indicator
Power Consumption
NORMAL OPERATION
On
30 watts
POWER SAVING MODE
Blinking
Typical 0.3 watts
POWER OFF
Off
Typical 0.3 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
More Information 6-2
6-3 Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
U.S.A
CANADA
MEXICO
NORTH AMERICA
1-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864) http://www.samsung.com
http://www.samsung.com/ca
(English) http://www.samsung.com/ca_fr
(French) http://www.samsung.com
ARGENTINE
BOLIVIA
BRAZIL
CHILE
COLOMBIA
COSTA RICA
DOMINICA
ECUADOR
EL SALVADOR
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
LATIN AMERICA
0800-333-3733
800-10-7260
0800-124-421
4004-0000
800-SAMSUNG(726-7864)
From mobile 02-482 82 00
01-8000112112
0-800-507-7267 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
1-800-751-2676
1-800-10-7267 http://www.samsung.com
http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English) http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English) http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English)
800-6225
1-800-299-0013
800-27919267 http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English)
1-800-234-7267 http://www.samsung.com
00-1800-5077267 http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English) http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English)
800-7267 http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English) http://www.samsung.com/latin(Spanish) http://www.samsung.com/latin_en(English)
0-800-777-08 http://www.samsung.com
6-3 More Information
GREECE
HUNGARY
ITALIA
LATVIA
LITHUANIA
LUXEMBURG
MONTENEGRO
NETHERLANDS
NORWAY
More Information
PUERTO RICO
TRINIDAD & TOBAGO
VENEZUELA
AUSTRIA
BELGIUM
BOSNIA
BULGARIA
CROATIA
CYPRUS
CZECH
DENMARK
EIRE
ESTONIA
FINLAND
FRANCE
GERMANY
LATIN AMERICA
1-800-682-3180
1-800-SAMSUNG (726-7864)
0-800-100-5303
EUROPE
0810 - SAMSUNG
(7267864, € 0.07/min)
02-201-24-18 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
05 133 1999
07001 33 11 , normal tariff
062 SAMSUNG (062 726 7864)
8009 4000 only from landline
(+30) 210 6897691 from mobile and land line
800 - SAMSUNG (800-726786) http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr
(French) http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
70 70 19 70
0818 717100
800-7267
09 85635050
01 48 63 00 00
0180 5 SAMSUNG bzw.
0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max.
0,42 €/Min.)
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
8000-7267
8-800-77777
261 03 710
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815 56480 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
6-3
POLAND
PORTUGAL
ROMANIA
SERBIA
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
U.K
ARMENIA
AZERBAIJAN
BELARUS
GEORGIA
KAZAKHSTAN
KYRGYZSTAN
MOLDOVA
MONGOLIA
RUSSIA
TADJIKISTAN
UKRAINE
UZBEKISTAN
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
6-3
EUROPE
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
808 20-SAMSUNG (808 20 7267)
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
0700 Samsung (0700 726 7864)
0800 - SAMSUNG (0800-726 786)
902 - 1 - SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
0848 - SAMSUNG
(7267864, CHF 0.08/min)
0330 SAMSUNG (7267864)
CIS
0-800-05-555
088-55-55-555
810-800-500-55-500
0-800-555-555
8-10-800-500-55-500 (GSM: 7799)
00-800-500-55-500
0-800-614-40
+7-800-555-55-55
8-800-555-55-55
8-10-800-500-55-500
0-800-502-000 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/ch(German) http://www.samsung.com/ch_fr(French) http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/ua(Ukrainian) http://www.samsung.com/ua_ru(Russian) http://www.samsung.com
8-10-800-500-55-500
ASIA PACIFIC
1300 362 603
400-810-5858
(852) 3698 4698 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com/hk (Chinese) http://www.samsung.com/hk_en(English) http://www.samsung.com
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777 http://www.samsung.com
More Information
JAPAN
MALAYSIA
NEW ZEALAND
PHILIPPINES
SINGAPORE
TAIWAN
THAILAND
VIETNAM
BAHRAIN
EGYPT
IRAN
JORDAN
KUWAIT
MOROCCO
OMAN
SAUDI ARABIA
TURKEY
U.A.E
ANGOLA
BOTSWANA
CAMEROON
COTE D’ IVOIRE
GHANA
KENYA
More Information
ASIA PACIFIC
0120-327-527
1800-88-9999
0800 SAMSUNG (0800 726 786)
1-800-10-SAMSUNG (726-7864) for
PLDT
1-800-3-SAMSUNG (726-7864) for Digitel
1-800-8-SAMSUNG (726-7864) for
Globe
02-5805777
1800-SAMSUNG (726-7864)
0800-329-999
0266-026-066
1800-29-3232
02-689-3232
1 800 588 889 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
8000-4726
MIDDLE EAST
08000-726786
021-8255
800-22273
065777444
183-2255 http://www.samsung.com/ae(English) http://www.samsung.com/ae_ar(Arabic) http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
080 100 2255
800-SAMSUNG (726-7864)
9200-21230 http://www.samsung.com/ae(English) http://www.samsung.com/ae_ar(Arabic) http://www.samsung.com
http://www.samsung.com/ae(English) http://www.samsung.com/ae_ar(Arabic) http://www.samsung.com/ae(English) http://www.samsung.com/ae_ar(Arabic) http://www.samsung.com
http://www.samsung.com
444 77 11
800-SAMSUNG (726-7864)
AFRICA
91-726-7864
0800-726-000
7095- 0077
8000 0077
0800-10077
0302-200077
0800 724 000 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
6-3
NAMIBIA
NIGERIA
SENEGAL
SOUTH AFRICA
TANZANIA
UGANDA
ZAMBIA
AFRICA
8197267864
0800-726-7864
800-00-0077
0860-SAMSUNG (726-7864)
0685 88 99 00
0800 300 300
211350370 http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
http://www.samsung.com
6-3 More Information
6-4 Responsibility for the Pay Service (Cost to Customers)
When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.).
• If a product is reinstalled or devices are connected additionally after installing the purchased product for the first time.
• If a product is reinstalled to move to a different spot or to move to a different house.
• If customer requests instructions on how to use because of another company's product.
• If customer requests instructions on how to use the network or another company's program.
• If customer requests software installation and setup for the product.
• If a service technician removes/cleans dusts or foreign materials inside of the product.
• If customer requests an installation additionally after purchasing a product through home-shopping or online.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
• external impact or drop.
• use of supplies or separatly sold product unspecified by Samsung.
• repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd.
• remodeling or repairing the product by customer.
• using it with incorrect voltage or non-authorised electrical connections.
• not following the "cautions" in User Manual.
Others
• If product fails by natural disaster (lightning, fire, earthquake, flood damage, etc) .
• If consumable components are all used up (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp, Filter, Ribbon, etc.).
If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first.
More Information 6-4
6-5 Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
6-5 More Information
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 32 Before You Start
- 32 Custody and Maintenance
- 32 Cleaning the Monitor
- 32 Safety Precautions
- 33 Package Contents
- 33 Installing the Stand
- 33 Connecting the monitor
- 33 Kensington Lock
- 34 Setting the Optimal Resolution
- 34 Standard Signal Mode Table
- 34 Installing the Device Driver
- 34 Product Operating Buttons
- 34 Using the Screen Adjustment Menu (OSD: On Screen Display)
- 34 Configuring Brightness and Contrast in the Initial Screen
- 35 Natural Color
- 35 MagicTune
- 35 MultiScreen
- 36 Monitor Self-Diagnosis
- 36 Before Requesting Service
- 37 Specifications
- 37 Power Saving Function
- 37 Contact SAMSUNG WORLD WIDE
- 37 Responsibility for the Pay Service (Cost to Customers)