Samsung | MX-HS6500 | User manual | Samsung 2,100 W 2.2 Ch Giga Sound System HS6500 User Manual

MX-HS6500
PREMIUM HI-FI Component System
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USERSERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN THE COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
2
English
This symbol indicates important
instructions accompanying the product.
Precautions
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
• Ensure that the AC power in your house matches
the requirements listed on the identification sticker
located on the back of your product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure the
ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert
Slot is empty.
• To turn off the productcompletely, disconnect the
AC plug from the wall outlet. Disconnect the AC
plug from the wall outlet if you will leave the device
unused for a long period of time.
• During thunderstorms, disconnect the AC plug
from the wall outlet. Voltage peaks due to lightning
could damage the product.
• Do not expose the product to direct sunlight or
other heat sources. This could cause the product
to overheat and malfunction.
• Protect the product from moisture and excess
heat and equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC wall
outlet if the product malfunctions.
• This product is for personal use only. It is not
intended for industrial use.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment. Do
not dispose of batteries in the general household
trash.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good stereo
sound.
• Direct the loudspeakers towards the listening area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with liquids,
such as vases, on the apparatus.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and receptacle.
-- An improper ground may cause electric shock
or equipment damage. (Class l Equipment only.)
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on a disc may reduce
sound and picture quality or cause skipping.
-- Avoid touching the surface of a disc where data
has been recorded.
-- Hold the disc by the edges so
that fingerprints will not get on the
surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt on a disc, clean it
with a mild detergent diluted in water and wipe
with a soft cloth.
-- When cleaning, wipe gently from the
inside to the outside of the disc.
• Disc Storage
-- Do not keep in direct sunlight.
-- Keep in a cool ventilated area.
-- Keep in a clean, protective jacket and store
vertically.
Disc and Format Compatibility
This product does not support Secure (DRM) Media
files.
CD-R Discs
• Some CD-R discs may not be playable depending
on the disc recording device (CD-Recorder or PC)
and the condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes
as they may not be played back.
• Some CD-RW (Rewritable) media may not be
playable.
• Only CD-Rs that are properly "closed" can be fully
played. If the session is closed, but the disc is left
open, you may not be able to fully play the disc.
MP3-CD Discs
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (for example, . / = +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only a consecutively written multisession disc
can be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
• If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may play.
• For files encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate and
high bit rate - 32Kbps ~ 320Kbps), the sound may
skip during playback.
• A maximum of 999 files can be played per CD.
Supported Audio Formats
File
Extension
*.mp3
*.wma
Audio
Codec
Sampling
Rate
Bit Rate
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
➣➣Does not support WMA Professional codec.
➣➣The above table shows supported sampling rates
and bit rates. Files of not supported formats may
not be played properly.
English
2
3
Contents
Thank you for buying this SAMSUNG Hi-Fi component system.
Please take time to read these instructions.
They will allow you how to operate your system and take full advantage of its features.
Safety Warnings........................................ 2
Precautions............................................... 2
Disc Storage & Management................... 3
Disc and Format Compatibility................ 3
Supported Audio Formats........................ 3
Contents.................................................... 4
Accessories............................................... 4
Description................................................ 5
Front Panel........................................... 5
Rear Panel............................................ 6
To Select a Track from
a USB Device..................................... 10
To Search a Folder Quickly............... 10
To Repeat........................................... 10
To Use High Speed Search............... 10
To Delete a File.................................. 10
To Skip 10 Tracks.............................. 10
Bluetooth................................................. 11
TV SoundConnect................................... 13
Setting the Clock.................................... 14
Timer Function........................................ 14
Cancelling the Timer............................... 15
Listening to Radio................................... 15
Selecting a Stored Station...................... 15
Recording Function................................ 16
Recording Speed.................................... 16
Selecting EQ Mode................................ 17
Selecting USER EQ Mode..................... 17
Selecting LOCAL EQ Mode................... 17
GIGA SOUND Function........................... 17
Using the FOOTBALL MODE................. 17
Party Function......................................... 17
BEAT WAVING Function......................... 17
Connecting a Microphone...................... 18
Troubleshooting...................................... 18
Specifications.......................................... 19
Cautions on Moving the Speakers..... 6
Remote Control................................... 7
Display Function....................................... 7
The DEMO MUSIC function..................... 7
CD/MP3/WMA-CD Playback................... 8
Selecting a Track....................................... 8
Searching for a Specific Music
Passage on a CD...................................... 8
Repeat One or All Tracks on a
Compact Disc........................................... 8
10 Skip Function....................................... 9
CD Programming...................................... 9
Checking or Editing the
Programmed Tracks................................. 9
Auto Change Function.............................. 9
Playing a USB Device............................. 10
Accessories
Check for the supplied accessories below.
DISPLAY
USB
REPEAT
CD/
CD REC SPEED AUTO CHANGE
BEAT
WAVING
AH59-02531A
FM Antenna
User's Manual
Remote Control/Batteries
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
4
Symbols
English
Important
Note
Description
Front Panel
1
2
29
28
3
27
4
26
5
25
6
24
7
23
8
22
9
10
21
11
20
12
19
13
14
15
18
17
16
1.
POWER button
• Press this button to switch your Hi-Fi component
system.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
PARTY button
AUTO CHANGE button
MASTER VOLUME button
EQ button
Search/Skip button
STOP/Tuning Mode button
RETURN button
DELETE button
USB 1/USB 2 button
MP3/CD button
TUNER/AUX button
USB 1 jack
MIC jack
Disc Tray
REC SPEED
AUX IN 1 jack
Connecting an External Component such as an MP3
player.
• Connect AUX IN 1 on the front panel of the HiFi component to the Audio Out of the external
component/MP3 player.
• Press the TUNER/AUX button to select the AUX 1
input.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
USB 2 REC jack
USB 2 REC button
OPEN/CLOSE button
BLUETOOTH/TV SOUND CONNECT button
ENTER button
PLAY/PAUSE button
Search/Skip button
USER EQ button
Window display
LOCAL EQ button FOOTBALL MODE button
GIGA SOUND BLAST button
English
4
5
Rear Panel
1. Cooling fan
• The fan always turns when the power is on.
Provide a minimum of 15 cm of clear space on all
sides of the fan when you install the product.
2. 2.2 CH Speaker Connector Terminals
The speaker connector terminals are located on the
rear of the system.
1. To achieve the correct sound quality, insert the
speaker connector cables identified below into the
correct speaker terminals on the back of the system.
• Left speaker (marked L).
• Right speaker (marked R).
3. ONLY FOR SERVICE
• This jackis for service only. Please do not use.
4. AUX IN 2 Terminals
1
2
3
4
5
6
1. Use an Audio Cable (not supplied) to connect AUX IN
2 on the product to Audio Out on an external analog
component.
• Be sure to match connector colors.
• If the external analog component has only one
Audio Out jack, connect to either the left or right
terminal.
• Press the TUNER/AUX button to select the AUX 2
input.
• When the unit is in AUX mode, if none of the
buttons are pushed for more than 8 hours, the
power will automatically turn off.
5. FM Antenna Connector Terminal
1. Connect the FM antenna (supplied) to the FM Antenna
jack.
2. Slowly move the antenna wire until you find a location
where reception is good, then fasten it to a wall or
other rigid surface.
3. If reception is poor, you may need to install an outdoor
antenna. To do so, connect an outdoor FM antenna to
FM antenna jack on the rear of the system using a
75Ω coaxial cable (not supplied).
6. LED Terminals for the Front Speakers
To enjoy the special light effect of the speakers, connect
the LED cables of the Front Speakers to the LED
terminals of the system.
Cautions on Moving the Speakers
• When moving the main unit and speakers, make sure to separate all connected speaker cables before.
• When separating the FRONT LED cables, press the lock to release the connector as shown below.
6
English
Remote Control
30
1
DISPLAY
USB
2
3
CD/
29
1. POWER
2. TUNER/AUX
3. USB
4. Number(0~9)
button
• During
playback, press
the desired
track number.
The selected
track is played.
28
4
5
6
7
8
9
10
11
12
27
26
REPEAT
CD REC SPEED AUTO CHANGE
BEAT
WAVING
22
21
20
19
18
13
14
15
16
17
25
24
23
AH59-02531A
5.
6.
7.
8.
9.
10.
SKIP (-10, +10)
SKIP
STOP
PLAY
REPEAT
GIGA
11.
12.
13.
14.
15.
16.
ENTER
VOLUME (-,+)
TUNING MODE
TIMER ON/OFF
TIMER SET
SLEEP
17.
18.
+
19.
20.
21.
MY KARAOKE
MIC VOLUME -,
• Set a sleep time
to shut off the
product.
USB REC
DELETE
MO/ST
23. EQ
24. BEAT WAVING,
CD REC
SPEED
25. AUTO CHANGE
26. PAUSE
27. SEARCH
28. CD/Bluetooth
29. DISPLAY
30. MUTE
• Turn off
the sound
temporarily.
22. T
UNING/
ALBUM ,,.
Installing batteries in the Remote Control
`` Place batteries in the remote control so that the
polarities (+,- ) match the the diagram in the battery
compartment.
`` Do not dispose of batteries in a fire.
`` Do not short circuit, disassemble, or overheat the
batteries.
`` You could cause an explosion if you replace the
battery with the wrong type of battery. Replace the
battery only with the same or equivalent type.
`` The remote control can be used up to
* Battery size: AAA
approximately 23 feet (7 meters) in a straight line
from the unit.
Display Function
Lets you view all functions available on the display
and adjust the brightness of the display/LED.
Each time you press the DISPLAY button on the
remote control, the display mode will change as follows:
◆◆ The Demo function
All functions available on the system appear on the
front panel display.
◆◆ The Dimmer function
The Dimmer function is selected and the display
darkens.
◆◆ LED OFF
The LED is turned off while the dimmer function is .
working.
◆◆ Clock ON
The Clock you set is displayed.
◆◆ LED/Display ON
ALL Display and LED turn on.
The DEMO MUSIC function
Press the DISPLAY button on the remote control for
3 seconds to turn on the Demo mode.
Each time you press this button, the mode will
change as follows:
• DIMMER ; LED Off (unit/speaker) ; --:-- [time
display] ; LED On (unit/speaker);DEMO
• To cancel the Demo Music mode, press the
DISPLAY on the remote control for 5 seconds
again. The current mode is cancelled and the
product is turned off.
• Press the TUNER/AUX, BLUETOOTH/TV
SOUND CONNECT, or USB button on the
product. The current mode is canceled and the
mode is changed to the mode you selected.
• When the Demo mode is on, only the POWER (
) buttons, VOL,
buttons on the product and
the buttons mentioned above work.
DEMO sampler plays for about 3 minutes, only the
➣➣The
message remains displayed on the front panel after its
playback.
English
6
7
CD/MP3/WMA-CD Playback
Lets you play 12 cm compact discs without an adapter.
☛☛
This product is designed to play audio CDs, CDs, CD-Rs, CD-RWs, or MP3/WMA-CDs.
• Gently open or close the CD tray. Do not apply
excessive force.
• Do not apply force toor place a heavy object on the
product.
• Do not insert an out-of-spec. shapedCD such as a
heart or octangle shaped CD. You can damage the
product.
• For the best sound, maintain your compact discs
carefully and correctly.
1. Press
the OPEN/CLOSE button to open the disc tray.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the disc tray.
The disc will be played automatically.
• For MP3/WMA-CD audio, it may take several minutes
to finish scanning the disc tracks.
• If you play a file with an English name or a MP3/WMACD medium with anEnglish title, the song title will be
shown in the display. (Other languages besides English
may not be displayed.)
• An English-titled track containing a special character
will not display.
<CD/MP3/WMA-CD Playback Display>
Track Indicator
Playtime Indicator
4. A
djust the volume by:
• Tuning the VOLUME knob on the unit OR
• Pressing the Vol + or – button of the remote control.
The volume level can be adjusted in 31 steps (VOLUME
MIN, VOLUME 01 - VOLUME 29, and VOLUME MAX).
5. Main Unit
To pause playback temporarily, press the p button.
Press p again to continue playing the disc.
Remote control
To pause playback temporarily, press the PAUSE(#)
button.
Press the PLAY(+) button to continue playing the disc.
6. To end playing, press the STOP (@) button.
• If there is no CD inserted in the DISC tray, the unit displays “NO
DISC”.
• The quality of MP3/WMA-CD playback may vary depending
on the condition of the disc containing the music files or the
condition of the recorder with which the disc was created.
• If different types of files or unnecessary folders are on the same
disc, you will have problems with playback.
• Keep the tray closed whenever you are not using it to prevent
dust from entering.
• You can load or unload a compact disc when the radio, USB or
auxiliary source function is selected. Also, when you press the
OPEN/CLOSE button, the product will automatically change to
the MP3/CD mode.
• If no buttons are pressed on the product or remote control for
more than 3 minutes when the product is in Pause mode, the
product will change to Stop mode.
• If no buttons are pressed on the product or remote control for
more than 25 minutes when the product is in Stop mode or no
Disc mode, the power will automatically turn off.
8
English
Selecting a Track
You can select a desired track while a disc is
being played.
To play the previous track
Press the [ button within 3 seconds after the current
track starts playing.
Press the [ button twice, 3 seconds or more after
the current track starts playing.
To play the next track
Press the ] button.
To play the current track from the beginning
Press the [ button once, 3 seconds after the current
track starts playing.
To play the track of your choice
Press the [ or ] button to move to a desired track.
• You can also use the Number (0~9) buttons on
the remote control toselect a track.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
To search
Press ...
Forwards
Backwards
)
(
You can also press and hold the [ or ] button on
the main unit to automatically scan for a track.
Repeat One or All Tracks on a
Compact Disc
You can play a CD, a group of tracks in a folder
(MP3 only), or a single track repeatedly:
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
MP3: OFF➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CD: OFF➝ TRACK ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays the entire disc.
• RANDOM: Plays tracks in random order.
ndom play: If the file you selected to play is located
➣➣Foin ar Rafolder,
all the files in that folder are played in random
order. If the file you selected is located in the root folder,
all files in the root folder will be played in random order.
10 Skip Function
Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
CD Programming
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. W
hile in CD playback mode, press the STOP(@)
button to stop playing the CD.
2. Press the ENTER (
) button to display the
message below:
3.
4.
5.
6.
7.
(01= program number, --= track number)
Use the [ or ] button to move to a desired
track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
Press the ENTER (
) button to confirm your
selection. The selection is stored and
is displayed.
To select additional tracks, repeat Steps 3 and
4.
Press the PLAY (+) button to play the
programmed tracks.
Press the STOP(@) button to stop playing the
programmed tracks, Press the STOP (@) button
again to cancel playing the programmed tracks.
• If you open the disc tray or turn off the
product or change function, your
programming will be canceled.
Program mode, if you press the USB REC
➣➣Inor CD
the AUTO CHANGE buttons, these functions
will not work, and the unit will display "PROG".
Checking or Editing the
Programmed Tracks
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (@) button once.
2. Press the ENTER (
the message below:
) button twice to display
(C=Check, 01= program number)
➣➣If a total of 24 tracks are already programmed, “C” will be displayed rather
than “P” in the display.
3. Press the ENTER (
) button repeatedly until
the desired track is displayed.
4. Press the [ or ] button to select a different
track.
5. Press the ENTER (
selection.
) button to confirm your
6. To play the programmed tracks, press the
PLAY (+) button.
Auto Change Function
You can play a disc followed by a USB continuously.
1. Press the AUTO CHANGE button.
Each time you press this button, the mode will
switch as follows:
AUTO CHANGE ON ; AUTO CHANGE OFF
• When the auto change mode is "ON", the unit will play
the Disc ; USB 1 ; USB 2 continuously.
• When the auto change mode is "ON", if you press
the POWER button, FUNCTION button, or the
OPEN/CLOSE button, the auto change function
automatically switches to "OFF" mode.
• When the USB is playing, if you disconnected the
USB, the auto change function automatically switches
to "OFF" mode.
• When the auto change mode is "ON", the unit cannot
record.
• When the auto change mode is "ON", the REPEAT
and SLEEP functions automatically change to OFF.
• When the auto change mode is "ON", the CD REC
SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE
and SLEEP functions do not work, and the unit
displays "AUTO CHANGE ON".
• When DISC play ends, if there's no USB 1, the unit
will play music from USB 2.
• When DISC play ends, if there's no USB 1 and USB 2,
the unit will continue to play the disc.
• When USB 2 play ends, if there's no DISC, the unit
will play music from USB 1.
English
8
9
Playing a USB Device
Connect an external storage device such as a USB
flash memory or external HDD (Hard Disk Drive)
to the product. You can play files in MP3/WMA
format.
Before you begin! • Connect the external USB storage device to your product.
• Select the USB mode by pressing the USB 1 or USB
2 button on the main unit or select USB 1 or USB 2 by
pressing the USB button on the remote control.
• The first track of the first directory plays automatically.
➣➣To stop playing
Press the STOP ( @ ) button to stop playing.
➣➣To remove the USB device
If you press the STOP ( @ ) button once again,
you can remove the USB device safely.
Do not connect a USB recharger to the USB port
of this product. You can damage the product.
☛☛
To Select a Track from a USB Device
You can select an MP3 file during play.
➣➣
If you want to move to the previous/next track, press
the [,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
• If you press the [,] buttons more times than the
number of the files in the directory, the unit moves to
the next directory.
To Search a Folder Quickly
1. P
ress the TUNING/ALBUM button on the remote
control to move to the previous/next folder.
2. When the search is done, you will see the previous/
next folder name. The track will start playing.
To Repeat
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the repeat
mode will change as follows:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function, press the
REPEAT button until "OFF" is displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
To Use High Speed Search
You can search the desired section quickly during
play.
the (,) button.
➣➣•Press
Each time you press the button, you will move
backward/forward fast.
☛☛Sound does not output in fast playback mode.
10
English
To Delete a File
You can delete a file on your USB device.
1. Play a file you want to delete.
2. Press the DELETE button.
3. Press [ or ] or press the DELETE button to select
DEL Y.
• To cancel the selection, press the RETURN button on
the main unit.
4. Press the ENTER button.
The selected file will be deleted.
☛☛The NTFS file system is not supported.
To Skip 10 Tracks
Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
Read through the instructions below before using
a USB device with this unit.
• Some USB devices may not work properly with this
product.
• This product only supports external HDD's that are
formatted in the FAT file system.
• USB 2.0 HDD's should be connected to a separate
power source. Otherwise, the USB 2.0 HDD's will not
work.
• If a USB external storage device is connected to multiple
devices, only the MP3 files in the first HDD will be played.
• DRM-applied files are not supported. Digital Right
Management restricts unauthorized access to a DRM file
so that the copyright of the file is protected from piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use a USB hub. USB hubs are not supported.
• The unit displays only the first 15 characters of an MP3/
WMA file name.
• This device is designed to support removable HDDs with
less than 160GB. Depending on the device, a removable
HDD with 160GB or more may or may not be supported.
• It can take several minutes for the product to recognize
the files on a USB device.
• USB devices (particularly, USB HDDs) may cause a
delay when moving to the next track.
• With USB devices supporting only USB VER. 1.1, the
unit may access files slowly or may not recognize file
properties.
• In Stop mode, the product will turn off automatically if
there is no USB device connected to the USB jack for 25
minutes.
• Some USB devices, digital cameras, USB card readers,
iPods, iPhones, and Smart Phones may not be supported.
Bluetooth
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth
compliant devices to interconnect easily with each
other using a short, wireless connection.
• A Bluetooth device may cause noise or
malfunction, depending on usage, when:
-- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Hi-Fi Component.
-- It is subject to electrical variation from
obstructions caused by a wall, corner, or
office partitioning.
-- It is exposed to electrical interference from
same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Hi-Fi Component with the Bluetooth
device while they are close together.
• The greater the distance between the HiFi Component and the Bluetooth device, the
worse the quality. If the distance exceeds the
Bluetooth operational range, the connection is
lost.
• In poor reception areas, the Bluetooth
connection may not work properly.
• The Bluetooth connection only works when
the Bluetooth device and the Hi-Fi Component
are close together. The connection will be
automatically cut off if the Bluetooth device
is out of range. Even within range, the sound
quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric
interference during its operation.
To connect the Hi-Fi Component to a
Bluetooth device
1. Press the BLUETOOTH/TV SOUND CONNECT
button of the Hi-Fi Component to display the
BT message.
• You will see WAIT for a short period of time
and then BT READY on the front display of
the Hi-Fi Component.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] HI-FI XXXXXX" from the
list.
• When the product is connected to the
Bluetooth device, it will display Device
name ; BT on the front display.
• If the Bluetooth device has failed to pair
with the product, delete the previous
“[Samsung] HI-FI XXXXXX” found by the
Bluetooth device and have it search for the
product again.
5. You can listen to the music playing on the
connected Bluetooth device over the Hi-Fi
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
||NOTES |
The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
✎✎ The AVRCP feature is not supported.
✎✎ Connect only to a Bluetooth device that
supports the A2DP (AV) function.
✎✎ You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
Before you begin, confirm that your Bluetooth
device supports the Bluetooth-compliant stereo
headset function.
English
10
11
✎✎ Only one Bluetooth device can be paired at a
time.
✎✎ Once you have turned off the Hi-Fi Component
and the pairing is disconnected, the pairing will
not be restored automatically. To reconnect,
you must pair the device again.
✎✎ The Hi-Fi Component system may not search
or connect properly in the following cases:
-- If there is a strong electrical field around the
Hi-Fi Component.
-- If several Bluetooth devices are
simultaneously paired with Hi-Fi Component.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
-- Note that such devices as microwave ovens,
wireless LAN adaptors, fluorescent lights,
and gas stoves use the same frequency
range as the Bluetooth device, which can
cause electric interference.
To disconnect the Bluetooth device
from the Hi-Fi Component
You can disconnect the Bluetooth device
from the Hi-Fi Component. For instructions,
see the Bluetooth device's user manual.
• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi Component
will display BT DISCONNECTED ; BT READY
on the its display.
To disconnect the Hi-Fi Component
from the Bluetooth device
Press the other mode button on the front
panel of the Hi-Fi Component to switch
from Bluetooth mode to another mode or
turn off the Hi-Fi Component. The currently
connected device is disconnected.
||NOTES |
✎✎ The connected Bluetooth device will wait a
certain amount of time for a response from
the Hi-Fi Component before terminating the
connection.(Disconnection time may differ,
depending on the Bluetooth device)
✎✎ In Bluetooth connection mode, the Bluetooth
12
English
connection will be lost if the distance between
the Hi-Fi Component and the Bluetooth device
exceeds 16.25 feet (5 meters).
✎✎ If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Hi-Fi Component to restore the
pairing with the Bluetooth device.
✎✎ The Hi-Fi Component automatically turns off
after 25 minutes in the Ready mode.
✎✎ When a Bluetooth device is connected to the
Hi-Fi Component system, the Component
system automatically switches to the Bluetooth
mode if it is in a different mode (except
when it is displaying "REQUEST" in the TV
SoundConnect mode).
Using The Bluetooth Power On
When the product is turned off, you can
connect your smart device to the product via
a Bluetooth connection to turn it on.
1. Turn on the product,press and hold the
Bluetooth button on the remote to set the
Bluetooth Power On function on. Bluetooth
Power On appears on the display.
2. When the product is off, connect your smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer
to your smart device’s manual.)
• The Bluetooth device paired with your
product before.
3. When the connection is complete, the
product turns itself on automatically in
Bluetooth mode.
• Select the desired music to play from your
smart device.
||NOTES |
✎✎ Press and hold the CD/Bluetooth button on the
remote control to turn the Bluetooth Power On
function on or off.
Each time you press and hold this button,
the Hi-Fi Component displays BLUETOOTH
POWER ON ; BLUETOOTH POWER OFF
on its display.
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Hi-Fi Component by using the
TV SoundConnect function.
To connect the Hi-Fi Component to a
SoundConnect Compatible Samsung TV
Before activating this function, be sure to
activate the Samsung TV's SoundConnect
or SoundShare mode.
1. Press the BLUETOOTH/TV SOUND CONNECT
button of the Hi-Fi Component to display the
TV SOUNDCONNECT message.
WAIT ; SEARCH ; REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the Hi-Fi Component is connected
to the TV, it will display [TV] Name
;CONNECTED ; TV on the front display.
4. The audio from the connected TV plays over
the Hi-Fi Component system.
||NOTES |
✎✎ In TV SoundConnect mode, some model's
Play/Repeat/Stop/Next/Back functions are not
available.
✎✎ The SoundConnect feature is available on some
Samsung TVs released since 2012. Check
whether your TV supports the SoundShare or
SoundConnect function.
(For further details, refer to the TV's user's
manual.)
To disconnect the TV from the Hi-Fi
Component
You can disconnect the TV from Hi- Fi
Component.
For instructions, see the TV's user manual.
• When the Hi-Fi Component is disconnected
from the TV, the Hi-Fi Component will display TV
DISCONNECTED ; REQUEST on its display.
To disconnect the Hi-Fi Component
from the TV
Press another mode button on the front
panel of the Hi-Fi Component to switch from
TV SoundConnect mode to another mode or
turn off the Hi-Fi Component. The currently
connected device is disconnected.
||NOTES |
✎✎ The connected TV will wait a certain amount
of time for a response from the Hi-Fi
Component before terminating the connection.
(Disconnection time may differ, depending on
the TV)
✎✎ The connection may be lost or sound may
stutter if the distance between the TV and the
Hi-Fi Component exceeds 6.5 feet (2 m).
✎✎ Instability in the network environment may
cause the connection to be lost or sound to
stutter.
✎✎ The Hi-Fi Component automatically turns off
after 25 minutes if the product is not connected
to a TV.
✎✎ If you unplug the Hi-Fi Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Hi-Fi
Component into an outlet, and then set the TV
SoundConnect connection again.
✎✎ Only one Hi-Fi Component at a time can be
connected to a TV via TV SoundConnect.
✎✎ To connect to another TV in TV Soundconnect
mode, press the
button for more than 5
seconds, and then connect to the other TV by
following the directions above.
English
12
13
Setting the Clock
During each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
(
) button.
2. Press the TIMER SET button and then press the
ENTER (
) button, "CLOCK" is displayed.
3. Press the ENTER (
) button. The hour flashes.
• To increase the hours, press: ,
• To decrease the hours, press: .
4. When the correct hour is displayed, press the
ENTER (
) button. The minutes flash.
• To increase the minutes, press: ,
• To decrease the minutes, press: .
5. When the correct minute is displayed, press the
ENTER (
) button. " TIME" appears in the
display.
• The current time is now set.
• You can display the time, even when you are
using another function, by pressing the TIMER
SET button once.
• You can also use the ] or [ on the front
panel instead of the TUNING/ALBUM , or .
button in Steps 3 and 4.
Timer Function
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the POWER (
)
button.
2. Press the TIMER SET button until TIME is displayed.
3. Press the ENTER (
) button.
Result: O
N is displayed for a few seconds. You can
set the timer switch-on time.
4. Set the timer switch-on time.
a
b
c
d
ress the TUNING/ALBUM , or . button to P
set the hours.
Press the ENTER (
) button.
Result: The minutes flash.
Press the TUNING/ALBUM , or . button to set the minutes.
Press the ENTER (
) button.
Result: O
FF is displayed for a few seconds. You can
now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to set the hours.
b Press the ENTER (
) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to set the minutes.
d Press the ENTER (
) button.
Result: V
OL XX is displayed, where XX corresponds to the volume already set.
6. Press the TUNING/ALBUM , or . button to adjust
the volume level, and then press the ENTER (
button.
Result: The source to be selected is displayed.
)
7. Press the TUNING/ALBUM , or . button to select
the desired source to be played when the system
switches on.
If you select...
You must also...
FM (radio)
P ress the ENTER (
a
) button.
b Select a preset station by pressing
the TUNING/ALBUM , or .
button.
MP3/CD (compact disc) Load one compact disc.
USB
Connect the USB device.
8. Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
14
English
Listening to Radio
9. Press the ENTER (
) button.
Result: REC N is displayed. You can press the TUNING/ALBUM , or . button to select REC Y or REC
N, and then press ENTER (
) button.
1)If you select REC N, the Product will not record when
it turns on. If you have already set a tuner timer
recording, selecting REC N cancels it. Note that the
Product will still turn on and off at the times you set
earlier in this procedure.
2)If you select the REC Y, you can set the Product to
record when it turns on. The recording switch on and
switch off times can be different from the timer switch
on and off times you set earlier in this procedure.
a.Press the ENTER (
) button.
Result: ON is displayed for a few seconds. You can
set the tuner timer recording switch-on time.
b.Press the ENTER (
) button.
Result: OFF is displayed for a few seconds. You can
set the tuner timer recording switch-off time.
• The maximum tuner timer recording time is 5 hours.
• If the timer switch on and off times are identical, the
word ERROR is displayed.
• When there is no disc in or USB connected to the
Product, if you select the "CD" or "USB", the Product
automatically selects "TUNER".
• You may use the ], [ buttons on the main unit
instead of the TUNING/ALBUM , or . button to
adjust settings in Steps 4 through 9.
• If the switch-on or -off time is the same as the timer
recording time, only the switch-on or -off time is
effective, and the timer recording time is not applied.
• If the auto timer is turned on, the MP3/CD or USB
function may require an additional step to be activated
depending on the disc (or device). It is better for you to
select the tuner function instead.
Cancelling the Timer
After you have set the timer, the unit will start automatically at the time shown by the TIMER indication
on the display. If you no longer want to use the timer,
you must cancel it.
To
Press the TIMER ON/OFF button....
Cancel the timer Once. Result:
Restart the timer Twice. Result:
is no longer displayed.
is displayed again.
• When you select the TIMER OFF mode, the TIMER
RECORDING and TIMER function are not available. You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button.
2.
To search for
a station
Preset
Manual
Press the TUNING MODE button
One or more times until PRESET is
displayed. You can search the stored
frequencies in the Preset mode.
One or more times until MANUAL is
displayed. You can search the frequencies one by one in the Manual mode.
3. Select the station to be stored by:
• Pressing the TUNING/ALBUM , or . button on the
remote control to select the preset station.
• Press and hold the TUNING/ALBUM , or . button
on the remote control to automatically search for active
broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
• This applies only when listening to an FM station. 5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
mode
➣➣In• Tuner
In the Manual mode, you can use the [ or ] button
on the main unit to manually search for a radio station.
• In the Preset mode, you can use the [ or ] button
on the main unit to search for a stored radio station.
Selecting a Stored Station
You can listen to a stored radio station.
1. Select FM by pressing the TUNER/AUX button.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. P
ress the [ or ] button on the main unit or the
TUNING/ALBUM , or . on the remote control to
select a desired preset number.
English
14
15
Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. C
onnect an external USB storage device to the
USB 2 (
) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the MP3/CD button on the main unit to select
the CD function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection buttons ( [ or ] ) to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the TUNER/AUX button to select <AUX> input.
• Play a song from the external device.
USB 1
• Connect a USB device to the USB 1 jack of your
product
• Press the USB 1 button to select USB 1.
• Play a song from USB 1.
3. P
ress the USB REC button on the remote control or the
USB 2 REC button on the main unit to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button on the remote
control or press and hold the USB 2 REC button on
the main unit to start recording all tracks on the disc.
"FULL CD RECORDING" is displayed.
MP3-CD, USB 1
•
•
•
•
Press the USB REC button. The currently playing file
is copied onto the USB 2 device.
Press and hold the USB REC button. All the files in
the current folder are copied onto the USB 2 device.
If you connect a microphone and press the USB REC
button, the currently playing mp3 file and the sound from the
microphone is recorded onto the USB 2 device.
MP3 RECORDING: "MP3 RECORDING""RECORD"
COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done, “STOP” will
be displayed.
If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORD is displayed.
4. T
o stop recording, press the STOP (@) button. The
unit automatically creates and saves recorded files
in .MP3 format (SAM-XXXX.MP3).
16
English
5. After recording, a directory named
“RECORDING(DISCxxxx)”(FULL CD RECORDING),
“RECORDING”(TRACK RECORDING), “COPY”(MP3
CD/USB), “MP3 RECORDING”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING” is created on
your USB device.
• Do not disconnect the USB device or the AC Cord
during recording as this may cause damage to the file.
• WMA/MP2 files can be copied but not recorded.
• If you disconnect the USB device during a recording,
the main unit powers off, the unfinished recording file
may get damaged and cannot be deleted. If this occurs,
please connect the USB device to a PC and backup the
data stored in the USB first, and then format it.
• When the USB memory has insufficient free space, the
system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system is
not supported.
• When you use the CD high speed search function, CD
recording is not available.
• The recording time may be longer with some USB
devices.
• In the program mode, you can't use the CD recording
function.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• The GIGA SOUND function is set to "OFF" automatically
and is not available during a CD recording.
• The REPEAT function is set to "OFF" automatically and
is not available during a CD recording.
• If you use the MIC function during a CD recording, the
sound from the microphone will be recorded.
• Note that setting the input level too loud when recording
music from an external device through the AUX or USB
channel may cause noise in the recording. If this occurs,
lower the external device’s volume level.
• The maximum TUNER/AUX recording time is 5 hours.
Recording Speed
You can select the recording speed before recording.
Each time you press and hold the CD REC SPEED
button on the remote control or the REC SPEED button on the main unit, the recording speed will change
as follows:
RECORD SPD X 1 ; RECORD SPD X 4
• When you record from the tuner or an external source, you
cannot change the recording speed.
• If you select RECORD SPD X 4, sound is not produced during
the recording.
• If you connected the microphone, you have one recording
speed mode available: RECORD SPD X 1.
• During recording, if you disconnect the microphone, the
recording will stop. If you reconnect the microphone, the
recording will not restart.
Selecting EQ Mode
Your Hi-Fi component system provides predefined
equalizer settings that are optimized for particular
music genre. You can also adjust the bass, middle
and treble levels manually.
1. Press the EQ button.
Each time you press this button, the sound mode
changes as follows:
OFF;FLAT;ARABIC MUSIC;PERSIAN MUSIC
;GENGE;BONGO;RHUMBA;ESKISTA;AFROPOP1
;AFROPOP2;INDIAN POP;PARTY;POP;HIP HOP
;ROCK;JAZZ;CLASSIC;ELECTRONIC
;MP3 ENHANCER;VIRTUAL SOUND;U B 0
2. To set the BASS, MIDDLE, TREBLE level manually:
Press the ENTER button when you select U B 0.
Result: The BASS level flashes.
Press the TUNING/ALBUM , or . button to select a
level from -6,-4,-2, 0, +2, +4, or +6.
Press the ENTER button.
Result: The MIDDLE level flashes.
Press the TUNING/ALBUM , or . button to select a
level from -6,-4,-2, 0, +2, +4, or +6.
Press the ENTER button.
Result: The TREBLE level flashes.
Press the TUNING/ALBUM , or . button to select a
level from -6,-4,-2, 0, +2, +4, or +6.
Press the ENTER button.
Result: Setting is complete.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
Selecting USER EQ Mode
You can directly select the user EQ mode by
pressing the USER EQ button.
1. Press
the USER EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode
changes as follows: OFF ; U B 0
2. Refer to Step 2 above to set the BASS, MIDDLE,
and TREBLE levels.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• If no buttons are pressed within 4 seconds, your settings
will automatically be cancelled and the previous settings
will be saved.
Selecting LOCAL EQ Mode
You can select the LOCAL EQ mode directly by
pressing the LOCAL EQ button.
1. Press
the LOCAL EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode
changes as follows:
GIGA SOUND Function
The GIGA SOUND function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. P
ress the GIGA SOUND BLAST button on the
main unit or the GIGA button on the remote
control. Each time you press this button, the sound
changes as follows:
GIGA SOUND OFF ; GIGA SOUND BLAST
2. T
o cancel this function, press the GIGA SOUND
BLAST button until “GIGA SOUND OFF” is
displayed.
Using the FOOTBALL MODE
The football mode brightens the audio you are listening to and brings greater realism to sports
broadcasts.
1. Press the FOOTBALL MODE button.
Each time you press this button, the sound mode
changes as follows:
ANNOUNCER ; STADIUM ; OFF
2. To cancel this function, press the FOOTBALL
MODE button until “OFF” is displayed.
Party Function
You can choose a desired party mode.
1. P
ress the PARTY button. Each time you press the
button, the party mode changes as following:
PARTY 1 ; PARTY 2 ; PARTY 3 ; OFF
BEAT WAVING Function
The Beat Waving function lets you change the
Speaker LED display mode.
1. Each time you press the BEAT WAVING button on
the remote control, the Speaker LED display mode
changes as follows:
STARDUST ; EMERALD MOON ; STAR ; PARTY ;
FUN ; PURE ; FRESH ; LOVE ; JOY ; SUNSET ;
SUNRISE ; NATURE 1 ; NATURE 2 ; WAVE 1 ;
WAVE 2 ; OFF
• If you select BEAT WAVING OFF, all the speaker LED
displays are turned off.
OFF;FLAT;ARABIC MUSIC;PERSIAN MUSIC
;GENGE;BONGO;RHUMBA;ESKISTA;AFROPOP1
;AFROPOP2;INDIAN POP
• The Local equalizer is set to "OFF" automatically and is
not available during a CD recording.
English
16
17
Connecting a Microphone
You can insert a microphone to sing along with your favorite CDs.
1. Connect a mono microphone (3.5ø) to the MIC jack on the front of the product.
2. Press the MIC VOL-, + button to adjust the volume of the microphone.
3. Press the MY KARAOKE button to turn My Karaoke on and off. Each time the button is pressed, the selection
changes as follows: ON ➞ OFF.
`` If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from the
speakers. Turning down the microphone's volume or the speaker volume is also effective.
`` The microphone does not operate in the AUX or TUNER modes.
`` If you connect a microphone, GIGA SOUND will automatically turn off. When you remove the microphone, it will remain off,
You must turn it on again manually.
`` When My Karaoke is on, GIGA SOUND do not work.
`` The system does not retain the My Karaoke setting after you turn My Karaoke off.
`` Use a mono microphone. If you connect a stereo microphone to the unit, the microphone might not work properly.
`` The MY KARAOKE function is available only when you have connected a Microphone to the unit.
`` MY KARAOKE does not operate in the Bluetooth, TV SoundConnect, FM, and AUX mode.
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the unit,
disconnect the power cord, and contact the nearest authorized dealer or Samsung
Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
No sound.
• The unit does not produce sound during fast playback and slow
playback.
• Are the speakers connected properly?
• Is the disc severely damaged?
The remote control does not
work.
• Is the remote control being operated within its operational angle and
distance range?
• Are the batteries drained?
• The product is not working.
•Reset the unit: With no disc inserted and the “NO DISC” message on
(Example: The power goes out or the display of the product, press and hold the STOP (@) button on the
the front panel key doesn't work
main unit for longer than 5 seconds. or you hear a strange noise.)
Using the RESET function will erase all stored settings.
• The product is not working
Do not use this unless necessary.
normally.
Can't receive radio broadcast.
18
English
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
Specifications
General
FM Tuner
CD Disc
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
CD : 12 cm (COMPACT DISC)
3.9 Kg
233 (W) x 351 (H) x 300 (D) mm
+5°C~+35°C
10 % to 75 %
55 dB
12 dB
0.6 %
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
MX-HS6500- 2100 W RMS (10% THD)
Amplifier
Front speaker output
525 W/CH (4 Ω/100 Hz)
Subwoofer
525 W/CH (4 Ω/100 Hz)
Frequency range
20 Hz~20 KHz
S/N Ratio
75 dB
Channel separation
50 dB
Input sensitivity
(AUX 1) 1200 mV
(AUX 2) 2000 mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
For India Only
"This product is RoHS compliant"
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
Important Note About Service
• An administration fee may be charged if either:
a. An engineer is called out at your request and there is no defect in the product.
b. You bring the unit to a repair center and there is no defect in the product.
• You will be advised of the amount of the administration fee before any work is done or a home visit
is made.
English
18
19
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
Area
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 -Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and Mobile]
02-4222111 [Other landline]
1800-SAMSUNG (726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
SYRIA
IRAN
MOROCCO
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678) 80-1000-12 0800-22273
06 5777444
18252273
021-8255
080 100 2255
SAUDI ARABIA
920021230
TURKEY
` Africa
NIGERIA
444 77 11
EGYPT
ALGERIA
PAKISTAN
TUNISIA
JORDAN
GHANA
COTE D’ IVOIRE
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095- 0077
0800 545 545
0800 300 300
0685 88 99 00
9999
200
499999
1969
0860-SAMSUNG (726-7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk /support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp /support
www.samsung.com/my /support
www.samsung.com/ph /support
www.samsung.com/sg /support
www.samsung.com/th /support
www.samsung.com/tw /support
www.samsung.com/vn /support
www.samsung.com/ae /support (English)
www.samsung.com/ae_ar /support (Arabic)
www.samsung.com/eg /support
www.samsung.com/n_africa /support
www.samsung.com/pk /support
www.samsung.com/n_africa /support
www.samsung.com/Levant /support (English)
www.samsung.com/Levant /support (English)
www.samsung.com/iran /support
www.samsung.com/n_africa /support
www.samsung.com/sa /support
www.samsung.com/sa_en /support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr /support
www.samsung.com/support
www.samsung.com/support
AH68-02688M-00
Download PDF

advertising