Samsung | SPF-85M | User manual | Samsung SPF-85M User Manual

|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Power
The images here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
z
Failing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this may cause electric shock
or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a single outlet, as an overheated outlet
may cause fire.
Do not use force to pull the power cord. Don't place anything heavy on the power
cord, as this may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet
before moving the product. Make sure to disconnect the connection cables from
other devices as well.
z
Moving the product without disconnecting the power cord may damage it while
moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as
pulling the plug out by the cord may cause it to be damaged.
z
Failing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product.
z
Failing to do so, may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not
install inside a vehicle.
z
This may cause a malfunction, electric shock or fire.
z
In particular, avoid operating the monitor near water or outdoors where it could be
exposed to snow or rain.
Do not install the product near any heating appliance.
z
There is a risk of fire.
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
Installation
When installing the product on a cabinet or shelf, do not let the front end of the
product project beyond its front edge.
z
Failing to do so, may cause the product to fall, resulting in a product malfunction or
personal injury.
Do not place the power cord near a heater, as the power cord may melt, causing
electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.
z
Any contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
z
Failing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
z
Failing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or
personal injury.
Do not install the product in a location easily reached by children.
z
As the product may fall and cause personal injury.
|
|
Safety Symbols
|
Power
| Installation |
Using and
Cleaning
|
Using and Cleaning
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.
z
If water or any foreign substance enters the product, make sure to turn the product
off and disconnect the power plug from the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
z
If you need to repair your product, contact a service center. An attempt at repairing
this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.
z
Failing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
z
Failing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.
z
Do not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,
aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug.
z
Heavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general
conditions, make sure to contact one of our service engineers about the installation
as the product may encounter serious quality problems due to its environment.
z
This refers to locations exposed to conditions such as heavy fine dust, chemicals, high or
low temperature, moisture, or when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and
disconnect the power plug.
z
Using the product without verifying that it has not been damaged may cause electric
shock or fire. Please contact a service center.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
waste at the end of its working life. To prevent possible harm to the environment or damage to health from
uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
| Features
| Components |
Front
|
Back
|
Side
|
|
Side
|
Features
Expansion of built-in memory using memory cards. Instant view of stored images.
Background music function.
Provides a Mini-Monitor function.
Stylish Design
A premium, stylish design that can be used as a decoration on a desk or table.
A rotating stand that allows vertical/horizontal placement.
| Features
| Components |
Front
|
Back
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.
Components
Digital Photo Frame
(The product color and shape may vary depending on the model.)
Manual
Warranty
Quick Start
User Manual
(Not available in all locations)
Cables
USB cable
Power cord
Power Adapter
(A-mini B type)
| Features
| Components |
Front
|
Back
|
Side
|
Front
The product color and shape may vary depending on the model.
[MENU] Menu Button
Displays the menu window at the bottom left corner of the screen.
[
] Up Button
Used for moving up.
[ ] Left Button
Used for moving left.
[ ] Right Button
Used for moving right.
[
] Down Button
Used for moving down.
[
] Enter Button
Used for selection.
[
] Back Button
Return to the previous menu.
[
] Slideshow Button
Play or pause the Slideshow.
When playing a slideshow by pressing the [ ] button, the photos in the location of the
last played photo are played. If the photos in the location of the last played photo have
been removed, they are automatically searched for and then played in a slideshow.
| Features
| Components |
Front
|
Back
|
Side
|
Back
The product color and shape may vary depending on the model.
DC –In Jack
[
] Power Button
Connect the power adapter to this jack.
Connect the power cord to the power terminal of the power adapter.
Turns the product on or off.
Hold down the power button for about 2 seconds.
Stand
You can use the product in a vertical or horizontal direction by using the rotating stand.
Sliding Prevention
Supports the product so that it stays firmly in place on slippery surfaces.
Holder
Service terminal
This is a terminal for servicing the product only. Do not operate it arbitrarily.
Kensington lock
(The locking device has to be purchased separately.)
The Kensington lock is a device used to physically secure the system when using it in a public place.
| Features
| Components |
Front
|
Side
The product color and shape may vary depending on the model.
Speaker
You can listen to sound without connecting an additional speaker.
Back
|
Side
|
You can listen to sound by connecting headphones or earphones to the product.
Headphone connection
jack
MEMORY CARD
Allows you to insert an optional memory card. (Only applicable for SD/MS card)
Connect a PC or an external device using a USB cable.
Up stream terminal
Connect your Digital Photo Frame to a PC's USB terminal
with a USB cable.
Make sure to use the USB cable (A-mini B type) provided with the product when
connecting your digital photo frame to a PC through the up stream terminal.
Down stream terminal
Connect your Digital Photo Frame to a USB-supported
storage device.
|
Power
|
USB
|
Memory Card
|
|
USB
|
Memory Card
|
Connecting the Power
Connect the adapter cable to the power terminal on the back of the product.
Connect the power cord to the power adapter.
Plug the power cord for the product into a nearby outlet.
Press the [
] button to turn on the power.
|
Connecting via USB
Power
Up Stream
Used to connect your digital photo frame to a PC.
When connecting your digital photo frame to a PC through the up stream terminal, make sure to use
Terminal
the USB cable provided with the product.
Down Stream
Used to connect an external USB-supporting device to your digital photo frame.
Terminal
Some USB devices may not support Digital Photo Frame.
This product does not support USB card readers. Only USB storage is supported.
The maximum recommended capacity for a USB storage device is 32GB.
The external devices connected to your Digital Photo Frame are not recognized by your PC.
When connecting an external device to the down stream terminal, use the USB cable provided with
the external device. (For more information on external devices and their cables, contact a relevant
service center.)
Samsung carries no liability for external device malfunctions caused by using any cable except the
standard cables specified for each device.
Some external products provide a cable that does not meet USB standards. Hence, they may cause a
malfunction.
If an external storage device does not work normally when connected to your digital photo frame, try
to connect it to your PC. If it still does not work normally when connected to your PC, contact a service
center for that external device or your PC.
Connect to the upstream jack of your digital photo frame.
Connect the USB terminal of your PC.
|
Connecting a Memory Card
Power
|
USB
|
Memory Card
|
MEMORY CARD
Slide the card in the direction marked on the top of the card.
Removing the memory card while playing MP3s, movies, or photos, may
cause the product to operate abnormally. In this case, turn the product off
and on.
Recommended capacity for different memory card types
SD / MicroSD / MiniSD ≤ 4GB, SDHC / MicroSDHC ≤ 32GB
MS ≤ 128MB, MS Pro ≤ 32GB
If no button is pressed for ten (10) minutes, Slideshow or Clock mode is activated. However, if a music file is being played, Clock
mode is activated and the filename of that music file is displayed. You can switch to Clock mode even when the movie is paused. In
some cases, you can switch to the Movie List screen.
|
User
Photo
|
Guide
|
Music
|
Movie
| Clock & Alarm |
Settings
|
User Guide
Buttons
Menu
Description
MENU
Enters or exits a menu.
,
Moves around the items and adjusts the value.
, ,
Selects a function.
Returns to the previous screen.
Hold down this button for two (2) seconds to return to the Main screen.
Play or pause a Slideshow.
When playing a slideshow by pressing the [ ] button, the photos in the location of the last played
photo are played. If the photos in the location of the last played photo have been removed, they are
automatically searched for and then played in a slideshow.
Screen Status Indications
Display
Description
Displayed when a USB device is connected.
Displayed when an SD/MS memory card is connected.
|
User
Guide
|
Photo
Photos
When selecting a folder
|
Music
|
Movie
| Clock & Alarm |
Settings
|
If you press the Menu button, the menu of the selected item is displayed on the screen.
Menu
Description
Open
Opens the selected folder.
Copy
Copies the selected folder.
Delete
Deletes the selected folder.
The menu displayed when selecting a thumbnail.
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub-Menu
Menu
Start Slideshow
Copy
Copy All Files
Delete
Delete All Files
Set as Background
Description
Play or pause a Slideshow.
Copies the selected file to a different storage device. (Activated when a storage device is connected.)
Copies all files to a different storage device. (Activated when a storage device is connected.)
Deletes the selected file.
Deletes all files.
Sets the selected image as the background of the main screen.
At this time the mode for the background is automatically changed to Custom mode.
When copying a photo from an external memory storage device (SD/MS, USB memory) to the Frame Memory, if [Settings][Options]-[Frame Memory Copy] is set to [Resized], the size (screen quality) of the photo is automatically reduced before
saving it, to fit it to the screen of your digital photo frame, and the EXIF (camera related information) saved in the photo is
removed. Therefore, make sure to only use the photos saved on the Frame Memory with the digital photo frame.
It may take a long time if a lot of files are copied at the same time.
Slideshow Menu
If you press the Menu button, the menu of the selected item is displayed on the screen.
This product can only support up to 4,000 pictures. If there are more than 4,000 pictures, slideshow will not be played for the
remaining pictures.
Menu
Stop Slideshow
Sub-Menu
Detailed Menu
Description
Pauses or resumes the slideshow.
Transition
No Effect, Fade, Blind, Cross Comb, Checker, Slide, Wipe, Silk, Wheel, Circle,
Box In/Out, Diamond, Plus, UnCover, Push, Stairs, Random
Selects a play effect.
Speed
Slideshow Settings
Fast, Normal, Slow
Selects a play speed.
Mode
All photos, Photo in Folder, Shuffle all photos, Shuffle photo in Folder, Repeat
one photo
Selects the play mode.
Display Clock
On, Off
Selects whether to play a slideshow and show the current time at the same time.
Brightness
0~100
You can adjust the brightness.
Rotate
You can rotate the monitor screen to 90°, 180° and 270°.
Original Fit, Auto Fit, Fit to Width, Fit to Screen
You can select how to adjust the size of the photos when displaying them on the screen.
Original Fit - When the photo size is larger than the screen size, it is displayed to fit the screen size.
Aspect Ratio
Auto Fit - Photos are fit to the screen size. A horizontal or vertical part of a photo may be cut but there is
no distortion.
Fit to Width - Photos are fit to the screen width. A horizontal or vertical part of a photo may be cut but
there is no distortion.
Fit to Screen - Photos are fit to a resolution of 800*600. (The photo image may be distorted)
Delete
Set as Background
Deletes a photo being displayed in the slideshow.
Sets the currently selected image as the background of the main screen.
On, Off, Music Setting
Select [On] of [Background Music].
Then select [Music Setting] of [Background Music] by pressing the MENU button and select a music file
Background Music
stored on the Frame Memory or a connected external memory device.
When the product is used for the first time, the built-in music files are used as the background music.
When the next slideshow is performed using the [Slideshow] button, the last played background music file
is played as the background music.
The location priority of the music files to be played for the background music is: "Location of the last
played background music file → [Frame Memory] → [USB] → [SD/MS]" .
Direct Functions
Menu
Description
MENU
Opens the on-screen menu and exits from the menu.
Plays the next file.
Plays the previous.
Adjusts the volume.
Play or pause a Slideshow.
|
User
Guide
Photo
|
|
Music
|
Movie
| Clock & Alarm |
Settings
Music
The menu displayed when selecting a list.
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub-Menu
Menu
Play Music
Play Mode
Description
Plays a file.
All musics, Music in Folder, Shuffle all musics, Shuffle music in Folder, Repeat one music
Selects the play mode.
Copy
Copy All Files
Delete
Delete All Files
Copies the selected file to a different storage device. (Activated when a storage device is connected.)
Copies all files to a different storage device. (Activated when a storage device is connected.)
Deletes the selected file.
Deletes all files.
The menu displayed while playing music.
|
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub-Menu
Menu
Description
All musics, Music in Folder, Shuffle all musics, Shuffle music in Folder, Repeat one music
Play Mode
Selects the play mode.
Direct Functions
Menu
MENU
Description
Opens the on-screen menu and exits from the menu.
Plays the next file.
If you hold down the button for a long time, the Fast Forward function operates.
Plays the previous.
If you hold down the button for a long time, the Rewind function operates.
Adjusts the volume.
Plays or Pauses a file.
Start Slideshow.
|
User
Guide
|
Photo
|
Music
|
Movie
| Clock & Alarm |
Movies
The menu displayed when selecting a list.
If you press the Menu button, the menu of the selected item is displayed on the screen.
Settings
|
Sub-Menu
Menu
Description
Play Movie
Plays a file.
All movies, Movie in Folder, Shuffle all movies, Shuffle movie in Folder, Repeat one movie
Play Mode
Selects the play mode.
Copy
Copies the selected file to a different storage device. (Activated when a storage device is connected.)
Copy All Files
Copies all files to a different storage device. (Activated when a storage device is connected.)
Delete
Deletes the selected file.
Delete All Files
Deletes all files.
The menu displayed while playing a movie.
If you press the Menu button, the menu of the selected item is displayed on the screen.
Sub-Menu
Menu
Description
All movies, Movie in Folder, Shuffle all movies, Shuffle movie in Folder, Repeat one movie
Play Mode
Selects the play mode.
0~100
Brightness
You can adjust the brightness.
Direct Function
Menu
MENU
Description
Opens the on-screen menu and exits from the menu.
Plays the next file.
If you hold down the button for a long time, the Fast Forward function operates.
Plays the previous.
If you hold down the button for a long time, the Rewind function operates.
Adjusts the volume.
Plays or Pauses a file.
Start Slideshow.
|
User
Guide
|
Photo
|
Music
|
Movie
| Clock & Alarm |
Settings
|
Clock & Alarm
Sub-Menu
Menu
Detailed Menu
Description
Month, Day, Year, Hour, Minute, am/pm (when the Time Format is set to 12 Hours).
Month, Day, Year, Hour, Minute (when the Time Format is set to 24 Hours).
Date and Time
Sets the date and time.
Time Zone
You can select a time zone.
Off, On
Daylight Saving Time
You can enable or disable the daylight saving time.
12 Hours, 24 Hours
Time Format
For the Time Format, you can select 12 Hours or 24 Hours.
If you select 24 Hours, am/pm is not displayed.
YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY
Date Format
You can select the format in which the date is displayed.
Analog, Digital, Clock & Calendar
Clock Type
You can select the clock type.
Yes, No
Activation
Manual, After 10min, After 20min, After 30min.
Set time
Alarm
Hour
1~12
Minute
00~59
am/pm
am, pm
Repeat
Once, Sat ~Sun, Mon~ Sat, Mon~ Fri, Everyday
Sound
Sound 1, Sound 2, Sound 3
Volume
0~100
You can set an alarm.
|
User
Guide
|
Settings
Settings
Photo
|
Music
|
Movie
| Clock & Alarm |
Settings
|
Menu
Sub-Menu
Detailed Menu
Description
Language
English, Deutsch, Español, Français, Italiano, Nederlands, Polski, Русский,
Português, Svenska, Türkçe, 简体中文, 日本語,한국어
You can select the language for the product.
Brightness
0~100
Adjusts the brightness of the screen.
Auto Rotation
Off, On
Off : If you set the frame on its edge during a SlideShow, even if the sensor detects the change, the picture
does not rotate accordingly.
On : If you set the frame on its edge, the sensor detects the change and rotates the picture automatically.
Options
Button Sound
Off, Low, Medium, High
You can turn the button operating sound heard when operating the product on or off.
Volume
0~100
Adjusts the volume.
Frame Memory Copy
Original Size, Resized
When copying a photo from an external memory storage device (SD/MS, USB memory) to the Frame Memory,
if [Settings]-[Options]-[Frame Memory Copy] is set to [Resized], the size (screen quality) of the photo is
automatically reduced before saving it, so that it can be fit to the screen of your digital photo frame, and the
EXIF (camera related information) saved in the photo is removed. Therefore, make sure to only use the photos
saved on the Frame Memory with the digital photo frame.
Starting Mode
Home, Last Mode, Slideshow
You can select the first screen to be displayed when the power is turned on.
Screen Saver
Slideshow, Clock
You can select the screensaver type.
If no button is pressed for ten (10) minutes, the screensaver is activated.
OSD Color Theme
Violet Style, Blue Style, Green Style, Orange Style
You can select a color theme for the menu background screen.
Preferences
The default color theme is Blue Style.
Home Background
Default, Custom
You can set the background of the main menu screen.
Auto Picture On/Off
Activation, Hour, Minute, am/pm, Repeat
When the [Off Time] is reached, other operations are stopped and the screen is turned off. When the [On
Time] is reached, the screen is turned on and the previous operating status persists.
If the screen is turned off as the time has reached the [Off Time], press any button except the Power button to
display the screen again.
If the product is being used as a Mini-Monitor or a Mass Storage device connected to your PC via a
USB cable, the screen will not be turned off even if the Off Time is reached.
You can update the product by using a USB memory stick or memory card
Firmware Update
(SD/MS).
For the latest firmware file, visit www.samsung.com.
Reset Settings
Update/Reset
Yes, No
Resets user-customized menu options to default
(Time setting and screen language setting excluded)
Product Information
Model, Firmware Version, Copyright
You can check the product information.
I want to update firmware.
Preparations
Digital Photo Frame
Firmware update file.
USB memory card or external memory devices(SD/MS)
Please visit www.samsung.com for the latest firmware update.
Connect USB
memory card
to PC
Connect USB
Memory Card
to Digital
If you are ready, connect the USB memory card to your PC.
Copy the firmware update file you downloaded to the USB memory card.
(Make sure to copy the firmware update file to the root directory.)
Remove the USB memory card from your PC, and connect it to your Digital Photo Frame.
If your Digital Photo Frame is off, turn it on.
Photo Frame
Updating
Select [Firmware Update] on the [Settings]-[Update/Reset] page.
After boot-up, turn your Digital Photo Frame off, remove the USB memory card, and turn your
Digital Photo Frame on again, for maximum safety.
Do not remove the USB, memory card during the update operation.
Do not press any key during the update operation.
Do not insert any other card during the update operation.
Do not turn your Digital Photo Frame off during the update operation.
You can identify whether the update operation has finished successfully or not by checking the
firmware version of your Digital Photo Frame is changed to the version of the firmware update.
The Digital Photo Frame not only allows you to appreciate photos but also provides an additional
Mini-Monitor function. The Mini-Monitor is a function for using the Digital Photo Frame as an
auxiliary monitor. Its usage is simple as the Digital Photo Frame connects to your PC via a USB cable.
This function allows you to work more efficiently at your PC by using an additional monitor. To use
your digital photo frame as a Mini-Monitor, first install the Frame Manager program. (However,
please note that you can use only one digital photo frame as a Mini-Monitor.)
Installing Frame Manager guide
Frame Manager User's Manual
Using your digital photo frame as a Mini-Monitor.
Using your digital photo frame as Mass Storage.
Changing the current mode to another mode
Adjusting the brightness
Updating the firmware
System Requirements
z
OS : Windows XP SP2, Vista (32bit)
z
System Processor Speed : 1.5 GHz
z
USB : USB 2.0 Host Controller
z
RAM : 256 MB or above
Caution
1.
When using Windows XP, Service Pack 2 must be installed.
It might not operate with any operating systems other than Windows XP SP2. We are not liable for problems that may
occur when installing it on an operating system other than Windows XP SP2.
2.
We recommend a CPU speed of 2.4 GHz or higher.
Your digital photo frame might not operate normally if the performance specifications of your PC are lower than the
recommendations.
3.
Make sure to install it correctly as directed in the Installation Guide.
4.
Do not use your Mini-Monitor as a primary monitor.
We are not liable for any problems that may occur if you do not follow the directions. If it is used as a primary monitor,
the screen may be blank.
5.
Make sure to use the provided USB cable.
6.
When using your digital photo frame as a Mini-Monitor, all buttons except for the Power button will not operate.
7.
Move the programs displayed and used on the Mini-Monitor to the primary monitor after you have finished using it.
8.
The Mini-Monitor may not operate with some video cards. In this case, set the ‘Hardware acceleration’ value to ‘None’.
To set Hardware acceleration to None: Right-click on the Windows Desktop and select Properties from the displayed
menu. The Display Properties window appears. Click Settings > Advanced > Troubleshoot tab. Move the Hardware
acceleration slide to None.
9.
10.
You cannot use the Aero effect of Windows Vista while using the Mini-Monitor.
When using Windows Vista, some movies cannot be played using the Mini-Monitor.
11.
If the video card's driver is updated while Frame Manager is installed, the Mini-Monitor function may not operate properly.
In this case, remove Frame Manager and install it again.
12.
If the rotation function of Frame Manager is used, the current location setting of Mini-Monitor may be changed. Even if
the rotation function is used, the screen will not be shown to be rotating in the [Display Properties] window.
Limitation and Recommendation
z
Limitation : Hardware graphics acceleration such as DirectX or OpenGL is not supported on the Mini-MonitorDisplay as it
would require the emulation of a graphics processor by your standard CPU which would not be favourable. Media
players which are using DirectX will not work properly on Mini-Monitor Display.
> Example: GOM player,VLC Player
z
Recommedation : Do not use/run directX or openGL application on Mini-Monitor display.
|
Specifications
|
Supported Files
Specifications
Items
Model Name
Specifications
SPF-85M
Type
8 "(20 cm)TFT
Resolution
800 x 600
Contrast Ratio
500 : 1
Interface
Digital 6 bit
Panel
Photo
Supported Formats
Movie
Music
Built-in Memory
JPEG Max Image Resolution 3200x2400(8Mb)
(Progressive,CMYK JPEG is not supported.)
MPEG4 : Advanced Simple Profile(ASP), Audio(MP3), 4Mbps
WMV : 720x480, Audio(WMA), 2.5Mbps
MP3 : 8~48KHz, 8~320Kbps
WMA : 8~48KHz, 8~320Kbps
64 MB
USB 2.0
USB
(Upstream (host) x 1, downstream (slave) x 1)
(USB = 32GB)
2 in 1
Media (Memory Card)
(SD/MicroSD/MiniSD=4GB, SDHC/MicroSDHC=32GB,
MS=128MB, MS Pro=32GB)
Rating
Power
Consumption
Sound
Dimensions (WxHxD)
External Power Adapter (12 V)
Normal 10W
Off mode(Power Switch Off) under 1W
1W + 1W(Stereo), headphone
228 x 45,7 x 187,5 mm / 9.0 x 1.8 x 7.4 inch (Without Stand)
228 x 194,5 x 62 mm / 9.0 x 7.7 x 2.4 inch (With Stand)
|
Weight
1.7 lbs / 787 g (Without Stand)
1.8 lbs / 827 g (With Stand)
The product design may differ according to the model, and specifications are subject to change without prior
notice for product performance enhancement.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential Use and can be
used in all areas including common residential areas. (Class B equipment radiates less electromagnetic
influences than class A equipment.)
|
Specifications
|
Supported Files
The Digital Photo Frame uses these modules:
WinCE 5.0
For more information, visit the following web sites:
RMI Alchemy Developer Support Site(http://support.rmicorp.com/RMI/support.nsf)
Supported Files
|
| Troubleshooting |
Terminology
|
Service Centers
|
Troubleshooting
This section lists various problems and solutions encountered by users while using the digital photo frame. When encountering a problem,
first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the
nearest service center.
Symptoms
The power does not turn on.
It takes time until an image is displayed
after the power is turned on.
It takes time to move to the next photo.
I connected an external device but it is
not operating.
There is still space on the Frame Memory
but I cannot copy any more photos.
Causes and Actions
Check the connections for the adapter cable and the power terminal of the
product.
If the resolution is high or the file size is large, the photo may be displayed
slowly on the screen.
Check the cable connections connecting the product and the external device.
The USB device must support Windows CE 5.0. Check whether your USB
device supports Windows CE 5.0.
Create a folder in the Frame Memory and copy your photos into the folder.
The screen color is too dim or dark.
Adjust the brightness in the Settings.
No slideshow is played automatically.
Set [Starting Mode] of [Settings-Preference] to [Slideshow].
When playing a movie, the screen is
displayed but there is no sound.
The screen is not displayed because the video codec of the file is not
supported.
Supported codecs are MPEG4 and WMV9.
The movie is played with the sound only.
Change the volume.
A blank screen is displayed.
Check whether the file contains sound information.
Auto On and Auto Off do not operate.
If Auto On and Auto Off are set to the same time, they will not operate.
Check the time settings.
The [Button Sound] is set to On but
The button operating sound will not be heard while a [Background Music,
there is no button operating sound.
Music, or Movie file] is playing.
Check whether the FrameManager program is installed.
The FrameManager icon is not displayed.
Select Start- Programs - Samsung - FrameManager to restart FrameManager.
Reboot your computer.
Check whether the button lock function is activated.
I pressed a button, but it does not
operate.
If you hold down the MENU button for more than five (5) seconds, the button
lock function is activated. If you press a button it will not operate.
To clear the button lock function, hold down MENU button for more than five
(5) seconds again.
| Troubleshooting |
Terminology
|
Service Centers
|
Terminology
Terms
Description
MPEG4 is a movie compression technology for video communications which
enables implementing bi-directional multimedia. It was developed to make it
MPEG4
(Motion Picture Expert Group4)
possible to transmit movies over low speed lines on the Internet or for mobile
communications. It is used widely on PCs, TVs and cell phones. A movie file
formatted in the MPEG4 format is called an MPG or MPEG file.
WMV9
(Window Media Video9)
A video codec in the MPEG4 format developed by Microsoft
MP3 is a high quality audio compression technology. It provides a 50 times
higher compression than CD. Because it provides high quality and a low size
MP3
(MPEG Audio Layer-3)
for its compression ratio, it is commonly used on the Internet and for FM radio
transmissions, etc. An audio file formatted in the MP3 format is called an MP3
file.
JPEG is an image compression technology. It provides the smallest loss of all
image compression technologies. It is used widely to transmit multimedia files
JPEG
(Joint Photographic Coding Expert
Group)
on the Internet and for other uses. An image file formatted in the JPEG format
is called a JPEG or JPG file. Usually, a JPEG file is created by taking a picture
with a digital camera, by drawing on a computer, or by a graphic package and
then by compressing the graphics image into the JPEG format.
An SD card is a Flash memory card the size of a postage stamp. It provides
high stability and high capacity. It is widely used in various digital products
SD Card
(Secure Digital Card)
such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. Its
appearance is similar to that of MMC, but the number of pins and their
thickness is different. It also has a password setting function for data security.
Use the up stream terminal when connecting to a PC. This product supports
USB 2.0. An A-mini B type cable which is used to connect your digital photo
USB Cable
frame to a PC is provided with the product. The A type is the USB connector
1) A-mini B type
used to connect to a PC. The B type is the USB connector used to connect to
an external device. You can connect your digital photo frame to a PC using an
A-mini B type USB cable.
Use this type of cable when using the down stream terminal. This product
USB Cable
2) Cable for Connecting Other Devices
supports USB 2.0. When connecting an external device to the down stream
terminal, use the USB cable provided with the external device.
| Troubleshooting |
Terminology
Service Centers
If you need a product service, contact or visit a Samsung service center.
For services for network connection and the Server.
Services
Contacts
|
Service Centers
|
Samsung Electronics web site
http://www.samsung.com
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.
North America
U.S.A
1-800-SAMSUNG (7267864)
http://www.samsung.com/us
CANADA
1-800-SAMSUNG (7267864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG (7267864)
http://www.samsung.com/mx
Latin America
ARGENTINE
BRAZIL
0800-333-3733
http://www.samsung.com/ar
0800-124-421
http://www.samsung.com
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
COLOMBIA
01-8000112112
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
Europe
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
http://www.samsung.com/at
http://www.samsung.com/be
BELGIUM
02 201 2418
(Dutch)
http://www.samsung.com/be_fr
(French)
CZECH REPUBLIC
800 - SAMSUNG (800-726786)
http://www.samsung.com/cz
DENMARK
8 - SAMSUNG (7267864)
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
30 - 6227 515
http://www.samsung.com/fi
FRANCE
01 4863 0000
http://www.samsung.com/fr
GERMANY
01805 - SAMSUNG (7267864, € 0.14/Min)
http://www.samsung.de
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com/it
LUXEMBURG
02 261 03 710
http://www.samsung.com/lu
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
http://www.samsung.com/nl
NORWAY
3 - SAMSUNG (7267864)
http://www.samsung.com/no
POLAND
0 801 1SAMSUNG(172678)
022 - 607 - 93 - 33
http://www.samsung.com/pl
PORTUGAL
808 20 - SAMSUNG (7267864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG (7267864)
http://www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com/es
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com/se
SWITZERLAND
0848 - SAMSUNG(7267864, CHF 0.08/min)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com/uk
CIS
BELARUS
810-800-500-55-500
ESTONIA
800-7267
http://www.samsung.com/ee
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
MOLDOVA
00-800-500-55-500
KAZAKHSTAN
8-10-800-500-55-500
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
http://www.samsung.ru
http://www.samsung.com/ua
http://www.samsung.ua_ru
http://www.samsung.com/kz_ru
Asia Pacific
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
400-810-5858
http://www.samsung.com/cn
010-6475 1880
HONG KONG
http://www.samsung.com/hk
3698-4698
http://www.samsung.com/hk_en/
3030 8282
INDIA
1800 110011
http://www.samsung.com/in
1-800-3000-8282
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
1-800-10-SAMSUNG(726-7864)
PHILIPPINES
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
http://www.samsung.com/ph
02-5805777
SINGAPORE
THAILAND
1800-SAMSUNG(726-7864)
1800-29-3232
http://www.samsung.com/sg
http://www.samsung.com/th
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
Middle East & Africa
SOUTH AFRICA
0860-SAMSUNG(726-7864)
http://www.samsung.com/za
TURKEY
444 77 11
http://www.samsung.com/tr
U.A.E
800-SAMSUNG (726-7864)
8000-4726
http://www.samsung.com/ae
Download PDF

advertising