Samsung LS20M22C User manual

PDF Download

Document

BN68-00633J-00cover.qxd 6/8/04 2:05 PM Page 1

- AFTER SALES SERVICE

- Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.

ELECTRONICS

BN68-00633J-00

ON-SCREEN MENUS

PC DISPLAY

TELETEXT

This device is a Class B digital apparatus.

LCD TV

LS15M23C

LS17M24C

LS20M22C

Owner’s Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

01-BN68-00633J-01Eng.qxd 8/6/04 9:04 AM Page 2

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Digital Ready TV: When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the set-top box output is 480p).

• Digital Ready TV: When you select the wide screen (16:9) mode to watch an SD-grade digital broadcast (and the set-top box output is 1080i).

Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes show programs made originally in the regular screen format (4:3) by converting the signals into digital form, in which case the left and right side edges of the screen are cropped.

Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.

Do not leave the screen in pause mode for extended periods of time as you may experience the same problem with products by other manufacturers.

• Digital Ready TV: When the

TV receives HD-grade signals

(and the set-top box output is 1080i).

When you watch a digital HD-grade broadcast on a regular (4:3) TV with the screen size "16:9" or "Panorama" selected, you will be able to watch the program but the top and bottom edges of the screen will be cropped.

Note : If the borders at the top, bottom and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.

Do not leave the screen in pause mode for extended periods of time as you may experience the same problem with products by other manufacturers.

01-BN68-00633J-01Eng.qxd 8/6/04 9:04 AM Page 3

• Integrated Digital TV

(Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives

480p regular signals).

• Digital Ready TV (wide-screen): digital TV: When the TV receives

SD-grade (regular) broadcasting signals (with a set-top box).

• When you watch an analogue

(regular) broadcast on a wide-screen TV (with the 4:3 screen mode selected).

• When you watch a DVD, CD or a video in wide screen (21:9) format on a wide-screen (16:9) TV.

• When you connect a computer or a game console to the TV and select the 4:3 screen mode.

Do not leave the screen in pause mode for extended periods of time as you may experience the same problem with products by other manufacturers.

If you connect a DVD player, computer or a game console to the wide-screen TV and watch a movie or play a game in regular

(4:3) or wide (21:9) screen mode, the left and right side edges, or the top and bottom edges of the screen will be cropped.

Do not leave the screen in pause mode for extended periods of time as you may experience the same problem with products by other manufacturers.

01-BN68-00633J-00Eng.qxd 6/8/04 10:01 AM Page 2

◆ C

ONNECTING AND

REPARING

OUR

■ Viewing the Control Panel .............................................................................

■

Viewing the Connection Panel ......................................................................

- Connecting an Aerial or Cable Television Network....................................

- Connecting Component Device

(DVD - 480i, 480p, 576i, and 576p only supported) ..........................................

- Connecting a Computer .............................................................................

- Connecting External A/V Devices ..............................................................

- Connecting Headphones ...........................................................................

- Kensington Slot..........................................................................................

Viewing Pictures From External Sources......................................................

Inserting the Batteries in the Remote Control ...............................................

Viewing the Remote Control (All Functions Except Teletext)........................

Viewing the Remote Control (Teletext Functions) .........................................

Switching On and Off ....................................................................................

Placing in Standby Mode ..............................................................................

Becoming Familiar with the Remote Control.................................................

Plug & Play....................................................................................................

Selecting TV Mode or an Input Source .........................................................

Editing an Input Source Name ......................................................................

◆ S

ETTING THE

HANNELS

■

Storing Channels Automatically.....................................................................

Storing Channels Manually ...........................................................................

■

Editing the Channels .....................................................................................

Sorting the Stored Channels .........................................................................

◆ S

ETTING THE

ICTURE

■

Changing the Picture Standard .....................................................................

Adjusting the Custom Picture........................................................................

■ Adjusting the Screen Background Colour .....................................................

◆ S

ETTING THE

OUND

■

Changing the Sound Standard......................................................................

Selecting Auto Volume Control......................................................................

◆ S

ETTING THE

IME

■ Setting the Clock ...........................................................................................

■

Switching Off Automatically ...........................................................................

Switching the Television On and Off Automatically .......................................

English-2

01-BN68-00633J-00Eng.qxd 6/8/04 10:01 AM Page 3

◆ U

SING THE

ARIOUS

UNCTIONS

■ Setting the Blue Screen Mode ......................................................................

■ Displaying Information...................................................................................

◆ U

SING THE

ELETEXT

EATURE

■ Teletext Feature.............................................................................................

■

Displaying the Teletext Information ...............................................................

Selecting a Page by Number ........................................................................

Using FLOF to Select a Page .......................................................................

Storing Teletext Pages ..................................................................................

◆ U

SING THE

PC F

UNCTIONS

■

Setting Up Your PC Software ........................................................................

Coarse and Fine Tuning of the Image...........................................................

■

Changing the Image Position ........................................................................

Initializing the Image Settings .......................................................................

Adjusting the PC Screen Automatically.........................................................

Picture Mode .................................................................................................

Adjusting the Custom Picture........................................................................

Adjusting the Screen Background Colour .....................................................

Customizing the colour..................................................................................

◆ R

ECOMMENDATIONS

■ Troubleshooting: Before Contacting Service Personnel ...............................

■

Power Saver..................................................................................................

Technical and Environmental Specifications .................................................

Display Modes...............................................................................................

Retractable Stand .........................................................................................

Using Your TV in Another Country ................................................................

Using the Anti-Theft Kensington Lock ...........................................................

Installing VESA compliant mounting devices ................................................

Installing the Wall Mount Kit ..........................................................................

Symbols

Press Important Note

English-3

01-BN68-00633J-00Eng.qxd 6/8/04 10:01 AM Page 4

Viewing the Control Panel

SOURCE

Displays a menu of all of the available input sources

(TV - AV - S-Video - Component - PC).

You can also use the SOURCE( ) button on the TV’s control panel to make selections.

MENU

Press to see an on-screen menu of your TV’s features.

- VOL +

Moves the selector left or right on the OSD.

Decreases or increases the level of audio volume and the values of the selected function.

Moves the selector down or up on the OSD.

Decreases or increases the channel number.

POWER

Turns ON/OFF your set.

HEADPHONE

SPEAKERS

REMOTE CONTROL SENSOR

Aims the remote control towards this spot on the TV.

POWER INDICATOR

Lights up when you turn the power off.

(Red light shows in stand-by mode, Red shows when you turn the power on, and light is off after the power is on. Green shows when you set Timer on or off.)

English-4

01-BN68-00633J-01Eng.qxd 7/25/04 11:19 AM Page 5

Viewing the Connection Panel

< LS17M24C > < LS15M23C / LS20M22C >

Power Input Power Input

Option

Whenever you connect an audio or video system to your set, ensure that all elements are switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

English-5

01-BN68-00633J-00Eng.qxd 6/11/04 1:44 PM Page 6

Viewing the Connection Panel

Connecting an Aerial or Cable Television Network (depending on the model).

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial

- A cable television network

- A satellite network

Connecting Component Device (DVD - 480i, 480p, 576i, and 576p only supported).

- Connect component video cables to component connector (“Y”, “P

”, “P

”) on the rear of your set and the other ends to corresponding component video out connectors on the DVD.

- The Y, Pb and Pr connectors on your component device (DVD) are sometimes labeled Y, B-Y and R-Y or Y,

Cb and Cr.

- Connect RCA audio cables to “L - AUDIO - R” on the rear of your set and the other ends to corresponding audio out connectors on the DVD.

- Input signals not supported: 720p, 1080i, and 1080p.

Connecting a Computer.

- Connect the 15 Pin D-SUB connector to the PC video connector.

- Connect the stereo audio cable to the “PC AUDIO IN” jack ( ) on the rear of your set and the other end to the “Audio Out” jack of the sound card on your computer.

➣

15 Pin D-SUB connector

Pin

Separate H/V Composite H/V

Red (R)

Green (G)

Blue (B)

Grounding

Grounding (DDC return)

Grounding - Red (R)

Grounding - Green (G)

Grounding - Blue (B)

No connection

Grounding - Sync. / Self test

Grounding

Red (R)

Green (G)

Blue (B)

Grounding

Grounding (DDC return)

Grounding - Red (R)

Grounding - Green (G)

Grounding - Blue (B)

No connection

Grounding - Sync. / Self test

Grounding

DDC - SDA (Data) DDC - SDA (Data)

Horizontal Sync.Horizontal/Vertical Sync.

Vertical Sync.Not used

DDC - SCL (Clock) DDC - SCL (Clock)

English-6

01-BN68-00633J-00Eng.qxd 6/8/04 10:01 AM Page 7

Viewing the Connection Panel

Connecting External A/V Devices.

- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD or Camcorder.

- Connect RCA audio cables to “(MONO)L-AUDIO-R” on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

Connecting Headphones.

- Plug a set of headphones into the 3.5mm mini-jack socket on the right-side of the set.

While the headphones are connected, the sound from the built-in speakers will be disabled.

Kensington Slot.

- This television has been designed to apply a burglarproof lock. (See page 49)

English-7

01-BN68-00633J-00Eng.qxd 6/8/04 10:01 AM Page 8

Viewing Pictures From External Sources

Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input.

Check that all the necessary connections have been made

(refer to pages 6 and 7 for further details).

Press the TV button to choose TV mode.

Press the SOURCE button to choose Video mode.

The input sources are displayed in the following order:

TV - AV - S-Video - Component - PC

English-8

01-BN68-00633J-00Eng.qxd 6/8/04 10:01 AM Page 9

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

Purchase your set.

Find that the remote control is no longer operating correctly.

Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it.

Install two AAA size batteries.

◆ + on the battery against + on the remote control

◆ - on the battery against - on the remote control

Replace the cover by aligning it with the base of the remote control and pressing it back into place.

Do not mix battery types, i.e. alkaline and manganese.

English-9

01-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 10

Viewing the Remote Control

(All Functions Except Teletext)

Television On/Off

Numeric buttons for direct channel access

One/Two-digit channel selection

Temporary sound switch-off

Volume up or down

Select to the TV mode directly

Menu display and change confirmation

Sound mode selection

Previous channel

-Next channel

-Previous channel

Available source selection

Use to see information on the current broadcast.

Exit the OSD

Control the cursor in the menu

Automatic switch-off

Sound effect selection

Picture effect selection

English-10

The performance of the remote control may be affected by bright light.

01-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 11

Viewing the Remote Control

(Teletext Functions)

Teletext hold

Exit from the teletext display

Teletext index

Teletext sub page

Teletext display/mix both teletext information and the normal broadcast

Fastext topic selection

P : Teletext next page

P : Teletext previous page

Teletext mode selection

(LIST/FLOF)

Teletext reveal

Teletext store

Teletext size selection

English-11

01-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 12

Switching On and Off

The mains lead is attached to the rear of your set.

Plug the mains lead into an appropriate socket.

Result: When the power cord is plugged in, the LED turns red.

Press the POWER button to switch on.

To switch off, press the POWER button again.

Placing in Standby Mode

Your set can be placed in Standby mode in order to reduce the power consumption.

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

Press the POWER button.

To switch back on, simply press the POWER button again, a numeric button, or channel or button.

Do not leave your set in Standby mode for long periods of time.

(when you are away on holiday, for example)

Turn off by pressing the POWER button.

It is best to unplug the set from the mains and aerial.

English-12

01-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 13

Becoming Familiar with the Remote Control

The remote control is used mainly to:

Change channels and adjust the volume.

Set up your set using the on-screen menu system.

The following table presents the most frequently used buttons and their functions.

Button

PRE-CH

-/--

MUTE

MENU

EXIT

Viewing Function Menu Function

Used to display the next stored channel.

Used to display the previous stored channel.

-

Used to switch repeatedly between the last two channels displayed. (PRE-CH; Previous Channel)

Used to display the corresponding channels.

Used to select a channel numbered ten or over.

Press this button, and the “--” symbol is displayed.

Enter the two-digit channel number.

Used to increase the volume.

Used to decrease the volume.

Used to switch the sound off temporarily.

To turn the sound back on, press this button again, or press the + or - button.

Used to display the on-screen menu system.

Used to return to the previous menu or normal viewing.

Used to exit the menu system and return directly to normal viewing.

Used to move among the menu items.

Used to select a menu item or increase the value of the selected item.

Used to return to the previous menu item or decrease the value of the selected item.

English-13

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 14

Plug & Play

When the set is initially powered ON, you are automatically presented with a series of basic customer settings.

The following settings are available.

If the set is in standby mode, press the POWER button on the remote control.

Result: The message Plug & Play is displayed.

It appears for a little while, and then the "Check antenna

input." menu is automatically displayed.

The message “Check antenna input.” is displayed with OK selected.

Press the ENTER button.

Result: The Area menu is displayed:

Asia/W. Europe - CIS/E. Europe - China -

Hong Kong/UK - Australia - NZL/Indonesia - South

Africa - America

Select your Area by pressing the or button.

Press the ENTER button.

Result: The Auto Store menu is displayed.

Press the ENTER button.

Result: The channel search will start and end automatically.

Select the Hour, Minute or am/pm by pressing the or button.

Set the Hour, Minute or am/pm by pressing the or button.

(Refer to “Setting the Clock” on page 28)

Press the MENU button to confirm your setting.

Result: The message “Enjoy your viewing” is displayed, and then the channel which has been stored will be activated.

Press the EXIT button to return to normal viewing.

English-14

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 15

Plug & Play

If you want to reset this feature...

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Press the or button to select the Plug & Play.

Press the ENTER button.

Result: The message Plug & Play is displayed.

For further details on how to set up this feature, refer to the previous page.

English-15

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 16

Selecting TV Mode or an Input Source

You can choose TV mode or change to an input source connected to the TV set. Use this button to choose an input source that you would like to watch.

Press the MENU button.

Result: The main menu is displayed.

Press the ENTER button to select the Input.

Result: The options available in the Input group are displayed.

Press the ENTER button.

Result: The Source List is selected.

Press the or button to move to the input source that you wish to choose.

Press the ENTER button.

Result: The input source changes to the one you have chosen.

English-16

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 17

Editing an Input Source Name

Entering the names of the input source devices connected to the input ports on the TV set allows you to find and choose an input source that you would like to watch in a quick and convenient manner.

Press the MENU button.

Result: The main menu is displayed.

Press the ENTER button to select the Input.

Result: The options available in the Input group are displayed.

Press the or button to select the Edit Name.

Press the ENTER button.

Press the or button to move to the input source that you wish to edit.

Press the ENTER button.

Result: The following options are available:

AV - S-Video - Component - PC

Select the required device by pressing the or repeatedly.

Result: The following options are available:

---- - VCR - DVD - Cable STB - HD STB - Satellite STB -

AV Receiver - DVD Receiver - Game - Camcorder -

DVD Combo - DHR - PC

When you are satisfied with your choice, press the EXIT button to return to normal viewing.

English-17

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 18

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.

However you can sort numbers manually and clear any channels you do not wish to watch.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Channel.

Result: The options available in the Channel group are displayed.

Press the ENTER button.

Press the or button to select Auto Store.

Press the ENTER button.

Result: The Start is selected.

Press the ENTER button to search the channels.

The sub menu is changed from Start to Stop with channel search started.

Result: The search will end automatically.

Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed.

To stop the search before it has finished, press the ENTER button to search the channels.

When the channels have been stored, you can:

Add or delete the channels (refer to page 21)

Sort them in the order required (refer to page 22)

Press the EXIT button to return to normal viewing.

English-18

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 19

Storing Channels Manually

You can store up to 100 channels, including those received via cable networks.

When storing channels manually, you can choose:

Whether or not to store each of the channels found.

The programme number of each stored channel which you wish to identify.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Channel.

Result: The options available in the Channel group are displayed.

Press the ENTER button.

Press the or button to select the Manual Store.

Press the ENTER button.

Result: The options available in the Manual Store group are displayed with the Prog. selected.

Press the ENTER button again.

To assign a programme number to a channel, find the correct number by pressing the or button and then press the

ENTER button.

Press the or button to select Colour System.

Press the ENTER button.

Select the Colour System required by pressing the or button repeatedly and then press the ENTER button.

Result: The colour standards are displayed in the following order:

AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58

Press the or button to select Sound System.

Press the ENTER button.

Select the Sound System required by pressing the or button repeatedly and then press the ENTER button.

Result: The sound standards are displayed in the following order:

BG - DK - I - M

For all the channels to move to the required channel numbers, repeat steps 5 to 7 after selecting Prog. by pressing the or button.

English-19

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 20

Storing Channels Manually

9 If you know the channel number to be stored,

Press the or button to select the Channel.

Press the ENTER button.

Select C (Air channel) or S (Cable channel) by pressing the or button and then press the ENTER button.

Press the button to select the Channel.

Select the required number by pressing the or button and then press the ENTER button.

If there is normal sound or no sound, re-select the sound system required.

10 If you do not know the channel numbers, press the or button to select Search.

Press the ENTER button.

Start the Search by pressing the or button.

Press the ENTER button.

Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen.

11 Press the or button to select Store.

Press the ENTER button.

The OK is selected.

Result: The channel and associated programme number are stored.

12 Repeat Steps 9 to 11 for each channel to be stored.

13 Press the EXIT button to return to normal viewing.

Channel mode

P (Programme mode): When tuning is completed, the broadcasting stations in your area will have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Real channel mode): You can select a channel by entering the assigned number to each broadcast station in this mode.

S (Cable channel mode): You can select a channel by entering the assigned number to each cable channel in this mode.

English-20

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 21

Editing the Channels

You can exclude any channels of your choice from the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed.

All channels that you do not specifically choose to skip are displayed during scanning.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Channel.

Result: The options available in the Channel group are displayed.

Press the ENTER button.

Press the or button to select Add/Delete.

Press the ENTER button.

Result: The state of the current channel is displayed.

Press the or button to select the channel that you wish to

Add or Delete.

Result: If the channel that you wish to edit is not in memory,

Add is selected and displayed.

Otherwise, if the channel that you wish to edit is in memory,

Delete is selected and displayed.

Press the ENTER button to Add or Delete the channel.

Repeat Step 5 and 6 for each channel to be added or erased.

8 Press the EXIT button to return to normal viewing.

English-21

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 22

Sorting the Stored Channels

You can exchange the numbers of two channels, in order to:

Modify the numeric order in which the channels have been automatically stored.

Assign easily remembered numbers to the channels that you watch most often.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Channel.

Result: The options available in the Channel group are displayed.

Press the ENTER button.

Press the or button to select Sort.

Press the ENTER button.

Result: The current Prog. and Channel are displayed.

5 Select the channel number that you wish to change by pressing

Press the ENTER button.

Result: The selected Channel is moved to the right side.

6 Press the or button to move to the position which you would like to change and then press the ENTER button.

Result: The selected channel is exchanged with the one previously stored to the chosen number.

Repeat step 5 to 6 for another channel to sort again.

8 Press the EXIT button to return to normal viewing.

English-22

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 23

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Result: The Mode is selected.

Press the ENTER button.

Select the required picture effect by pressing the or button repeatedly.

Press the ENTER button.

Result: The following picture effects are available:

Dynamic - Standard - Movie - Custom

6 Press the EXIT button to return to normal viewing.

You can also set these options simply by pressing the

P.MODE (Picture Mode) button.

English-23

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 24

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Press the or button to select the Custom.

Press the ENTER button.

Select the option (Contrast, Brightness, Sharpness, or

Colour) to be adjusted by pressing the or button.

Press the ENTER button.

Result: The horizontal bar is displayed.

Press the or button to reach the required setting.

When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

If you make any changes to these settings, the picture standard is automatically switched to Custom.

English-24

02-BN68-00633J-00Eng.qxd 6/8/04 10:02 AM Page 25

Adjusting the Screen Background Colour

You can change the screen background colour according to your preference.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Press the or button to select the Colour Tone.

Press the ENTER button.

Result: The following options are available:

Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2

When you are satisfied with your choice, press the EXIT button to return to normal viewing.

English-25

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 26

Changing the Sound Standard

You can select the type of special sound effect to be used when watching a given broadcast.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Sound.

Result: The options available in the Sound group are displayed.

Press the ENTER button.

Result: The Mode is selected .

Press the ENTER button.

Select the required sound effect by pressing the or button repeatedly.

Press the ENTER button.

Result: The following sound effects are available:

Standard - Speech

6 Press the EXIT button to return to normal viewing.

You can also set these options simply by pressing the

S.MODE (Sound Mode) button.

English-26

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 27

Selecting Auto Volume Control

Reduces the differences in volume level between broadcasters.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Sound.

Result: The options available in the Sound group are displayed.

Press the ENTER button.

Press the or button to select Auto Volume.

Press the ENTER button.

5 Press the or button to select Off/On.

Press the ENTER button.

6 Press the EXIT button to return to normal viewing.

English-27

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 28

Setting the Clock

You can set the TV’S clock so that the current time is displayed when you press the "INFO" button. You must also set the time if you wish to use the automatic On/Off timers.

If you disconnect the power cord, you have to set the clock again.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Result: The Time menu is displayed with Clock selected.

Press the ENTER button.

To...

Move to Hour, Minute or am/pm

Set the hour, minute or am/pm

Press the...

or button or button

When you have satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

English-28

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 29

Switching Off Automatically

You can select a time period of between Off and 180 minutes after which your set automatically switches off.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Result: The Time menu are displayed with Clock selected.

Press the or button to select the Sleep Timer.

Press the ENTER button.

Press the or button repeatedly and cycle through the preset time intervals.

Result: The preset time intervals:

Off, 30, 60, 90, 120, 150, 180 minutes.

To cancel the sleep timer function, select "Off" by pressing the or button.

Press the ENTER button.

Press the EXIT button to return to normal viewing.

You can set the sleep timer by simply pressing the "SLEEP" button on the remote control.

Press the SLEEP button on the remote control.

Result: If the sleep timer is not yet set, Off is displayed.

Otherwise, the remaining time before which the television switches to Standby mode is displayed.

Select the preset time interval for staying on by pressing the SLEEP button repeatedly.

English-29

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 30

Switching the Television On and Off Automatically

You can set the On/Off timers so that the set will:

Switch on automatically and tune to the channel of your choice at the time you select.

Switch off automatically at the time you select.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Result: The Time menu are displayed with Clock selected.

Press the or button to select the On Timer.

Press the ENTER button.

Result: The On Timer menu is displayed.

Set the time, channel and volume level at which you wish the set to be switched on.

To...

Press the...

Move to Hour, Minute, am/pm,

Channel, and Volume

Set Hour, Minute, am/pm, Channel and Volume level

Move to Setup

Select On to enable above setting

Press the ENTER button.

or button or button or button or button

Press the or button to select Off Timer.

In the same way, set the time at which you wish the set to be switched off automatically.

English-30

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 31

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.

If you wish to continue viewing the poor picture, you must set the

"Blue Screen" mode to "Off".

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Press the or button to select Blue Screen.

Press the ENTER button.

Select the required option (On or Off) by pressing the or button.

Press the EXIT button to return to normal viewing.

Displaying Information

You can view the setting status of the selected source by pressing the

"INFO" button on the remote control.

The information displayed varies according to the selected source.

English-31

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 32

Teletext Feature

Most television channels provide written information services via teletext.

Information provided includes:

Television programme times.

News bulletins and weather forecasts.

Sports results.

Travel information.

This information is divided into numbered pages (see diagram).

Part

Contents

Selected page number

Broadcasting channel identity

Current page number or search indicators

Date and time

Text

Status information

FASTEXT information

Teletext information is often divided between several pages displayed in sequence, which can be accessed by:

Entering the page number.

Selecting a title in a list.

Selecting a coloured heading (FASTEXT system).

English-32

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 33

Displaying the Teletext Information

You can display Teletext information at any time on your set.

☛

For Teletext information to be displayed correctly, channel reception must be stable; otherwise:

◆ Information may be missing.

◆ Some pages may not be displayed.

Select the channel providing the Teletext service using the or button.

Press the TTX/MIX button to activate the teletext mode.

Result: The contents page is displayed. It can be redisplayed at any time by pressing the (index) button.

If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX button again.

4 Press the TV( ) button again to exit the teletext display.

English-33

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 34

Selecting a Page by Number

You can enter the page number directly by pressing the numeric buttons on the remote control.

Enter the three-digit page number given in the content by pressing the corresponding numeric buttons.

Result: The current page counter is incremented and the page is then displayed.

If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.

To freeze the display on a given page, press the (hold) button.

Press the (hold) button again to resume.

Using the various display options:

To display...

◆ Hidden text

(answers to quiz games, for example)

◆ The normal screen

◆ A secondary page by entering its 4-digit number

◆ The next page

◆ The previous page

◆ Double-size letters in the:

• Upper half of the screen

• Lower half of the screen

◆ Normal screen

Press the...

(reveal)

(reveal) again

(subpage)

(page up)

(page down)

(size)

• Once

• Twice

• Three times

English-34

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 35

Using FLOF to Select a Page

The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control.

Display the teletext contents page by pressing the TTX/MIX button.

Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line.

Result: The page is displayed with other coloured information that can be selected in the same way.

To display the previous or next page, press the corresponding coloured button.

To display the subpage, see the following steps.

◆ Press the (subpage) button.

Result: The available subpages appear.

◆ Select the required subpage.

Subpages can be scrolled by using the or button.

Storing Teletext Pages

You can store up to four teletext pages to display them later at leisure.

Select the LIST mode using the (LIST/FLOF) button.

Result: Four 3-digit numbers are displayed in different colours.

The (LIST/FLOF) button is used to switch between the LIST and FLOF modes.

Press the coloured button corresponding to the page that will be replaced.

Enter the new page number using the numeric buttons.

Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time.

Press the (store) button until the corresponding blocks blink.

English-35

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 36

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1 First, click on “Control Panel” on the Windows start menu.

2 When the control panel window appears, click on “Appearance and

Themes” and a display dialog-box will appear.

3 When the control panel window appears, click on “Display” and a display dialog-box will appear.

4 Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution)

- refer to page 45, 47

If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”.

Otherwise, just click “OK” and exit the dialog box.

English-36

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 37

Coarse and Fine Tuning of the Image

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine tuning alone, then adjust the frequency as best as possible (coarse) and Fine tune again.

After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.

Preset to PC mode by pressing the SOURCE button on the remote contol.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Press the or button to select PC.

Press the ENTER button.

Result: The options available in the PC menu are displayed.

Press the ENTER button.

Result: The Image Lock menu is selected.

Press the or button to select Coarse or Fine.

Press the ENTER button.

Result: The horizontal bar is displayed.

Press the or button to adjust the screen quality.

Vertical stripes may appear or the picture may become blurry.

When you are satisfied with the settings, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

English-37

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 38

Changing the Image Position

Preset to PC mode by pressing the SOURCE button on the remote contol.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Press the or button to select PC.

Press the ENTER button.

Result: The options available in the PC menu are displayed.

Press the or button to select Position.

Press the ENTER button.

Result: You can adjust the image Position.

Press the or button to adjust the vertical position.

Press the or button to adjust the horizontal position.

Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

English-38

03-BN68-00633J-00Eng.qxd 6/8/04 10:03 AM Page 39

Initializing the Image Settings

You can replace all image settings with the factory default values.

Preset to PC mode by pressing the SOURCE button on the remote contol.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Press the or button to select PC.

Press the ENTER button.

Result: The options available in the PC menu are displayed.

Press the or button to select Image Reset.

Press the ENTER button.

Result: The message “Image Reset has completed.” is displayed.

Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

English-39

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 40

Adjusting the PC Screen Automatically

Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal.

The values of fine, coarse and position are adjusted automatically.

Preset to PC mode by pressing the SOURCE button on the remote contol.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select Setup.

Result: The options available in the Setup group are displayed.

Press the ENTER button.

Press the or button to select PC.

Press the ENTER button.

Result: The options available in the PC menu are displayed.

Press the or button to select Auto adjustment.

Press the ENTER button.

Result: The screen quality and position are automatically adjusted, and the screen returns to the original view a few seconds later.

Press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

English-40

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 41

Picture Mode

You can select the type of picture which best corresponds to your viewing requirements.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Result: The Mode is selected.

Press the ENTER button.

Select the required picture effect by pressing the or button repeatedly. Press the ENTER button.

Result: The following picture effects are available:

Entertain - Internet - Text - Custom

Press the EXIT button to return to normal viewing.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Press the or button to select the Custom.

Press the ENTER button.

Select the option (Contrast, Brightness) to be adjusted by pressing the or button.

Press the ENTER button.

Result: The horizontal bar is displayed.

Press the or button to reach the required setting.

When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

If you make any changes to these settings, the picture standard is automatically switched to Custom.

English-41

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 42

Adjusting the Screen Background Colour

You can change the screen background colour according to your preference.

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Press the or button to select the Colour Tone.

Press the ENTER button.

Result: The following options are available:

Cool - Normal - Warm - Custom

When you are satisfied with your choice, press the EXIT button to return to normal viewing.

English-42

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 43

Customizing the Colour

Press the MENU button.

Result: The main menu is displayed.

Press the or button to select the Picture.

Result: The options available in the Picture group are displayed.

Press the ENTER button.

Press the or button to select the Colour Control.

Press the ENTER button.

Select the option (Red, Green, Blue) to be adjusted by pressing the or button.

Press the ENTER button.

Result: The horizontal bar is displayed.

Press the or button to reach the required setting.

When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing.

English-43

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 44

Troubleshooting: Before Contacting Service Personnel

Before contacting Samsung after-sales service, perform the following simple checks.

If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer.

No sound or picture.

◆ Check that the mains lead has been connected to a wall socket.

◆ Check that you have pressed the POWER button.

◆ Check the picture contrast and brightness settings.

◆ Check the volume.

Normal picture but no sound.

No picture or black and white picture.

Sound and picture interference.

◆ Check the volume.

◆ Check whether the MUTE remote control.

button has been pressed on the

◆ Adjust the colour settings.

◆ Check that the broadcast system selected is correct.

◆ Try to identify the electrical appliance that is affecting the set and move it further away.

◆ Plug your set into a different mains socket.

◆ Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

Blurred or snowy picture, distorted sound.

Remote control malfunctions.

◆ Replace the remote control batteries.

◆ Clean the upper edge of the remote control (transmission window).

◆ Check the battery terminals.

“Check signal cable.” message is displayed.

◆ Check that the signal cable is firmly connected to the PC.

◆ Check that the PC is turned on.

In PC mode, “Mode Not Supported” message is displayed.

◆ Check the maximum resolution and the frequency of the video adapter.

◆ Compare these values with the data in the Display Modes.

(refer to page 47)

◆ Adjust the Coarse or Fine function. (refer to page 37) In PC mode, horizontal or vertical bars appear to flicker, jitter or shimmer on the image.

In PC mode, the screen is black and the power indicator light is steady amber or blinks every 0.5 or 1 seconds.

◆ The TV is using its power management system.

◆ Move the computer’s mouse or press any key on the keyboard.

English-44

04-BN68-00633J-01Eng.qxd 8/6/04 9:29 AM Page 45

Troubleshooting: Before Contacting Service Personnel

In PC mode, the image is not stable and may appear to vibrate.

◆ Check that the display resolution and frequency from your computer or video board is an available mode for your set.

On your computer check: Control Panel, Display, Settings.

◆ If the setting is not correct, use your computer utility programme to change the display settings.

Your set supports multiscan display functions within the following frequency domain:

15 ”(LS15M23C) 17 ”(LS17M24C) 20 ”(LS20M22C)

Horizontal frequency(kHz)

Vertical frequency(Hz)

Maximum refresh rate

(at 75Hz)

30~69

50~75

1024X768

30~80

50~75

1280X1024

28~47

50~75

800X600

In PC mode, the image is not centred on the screen.

◆ Adjust the horizontal and vertical position.

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one millionth) above is used for this product. This is not from bad quality and you can use it without uneasiness.

For example, the number of TFT LCD sub pixels: LS15M23C - 2,359,296, LS17M24C - 3,932,160,

LS20M22C - 1,440,000

Note : The component terminal of this set only supports 480i/480p/576i/576p resolution.

Power Saver

This set has a built-in power management system called PowerSaver. This system saves energy by switching your set into a low-power mode when it has not been used for a certain period of time.

The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA

DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.

State

Horizontal Sync

Vertical Sync

Power Indicator

Power Consumption

Normal Operation

Active

Off

15” 40W, 17” 45W, 20” 55W

Power-Saving Function mode

(EPA/NUTEK)

Inactive

Red, Blinking (1 sec interval)

Less than 3W

➣

This set automatically returns to normal operation when horizontal and vertical sync are restored.

This occurs when you move the computer’s mouse or press any key on the keyboard.

English-45

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 46

Technical and Environmental Specifications

Model Name

Panel

Size

Display Size

Type

Pixel Pitch

Viewing Angle

Frequency

Horizontal

Vertical

Display Color

Resolution

Optimum

Maximum

Input Signal

Sync.

Video Signal

Video

Color System

Video System

Component

Video Input

Audio Input

Power Supply

Input

Power Consumption

Maximum

Power Saving

Dimension (W x D x H)

TV Body

With stand

Weight

With stand

Environmental Considerations

Operationg Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Audio Characteristics

Audio Input

PC Audio Input

Audio Output

Headphone Output

Frequency

Response

LS15M23C LS17M24C LS20M22C

331.6(H) x 254.9(V)mm

13.05(H) x 10.03(V)inch

304.1(H) x 228.1(V)mm

11.97(H) x 8.98(V)inch a-si TFT active matrix

0.297(H) x 0.297(V)mm

140/115

30 ~ 69kHz

50 ~ 75Hz

16.2 Million

1024 x 768@60Hz

1024 x 768@75Hz

383.5(H) x 298.0(V)mm

15.09(H) x 11.73(V)inch

337.9(H) x 270.3(V)mm

13.30(H) x 10.64(V)inch a-si TFT active matrix

0.264(H) x 0.264(V)mm

140/120

30 ~ 80 kHz

50 ~ 75Hz

16.2 Million

1280 x 1024@60Hz

1280 x 1024@75Hz

H/V Separate, TTL, P or N

0.7 Vp-p @75 Ω

PAL / SECAM / NTSC4.43 / NTSC3.58

CVBS, S-VHS, RGB

413.0(H) x 311.0(V)mm

16.25(H) x 12.24(V)inch

408.0(H) x 306.0(V)mm

16.06(H) x 12.05(V)inch a-si TFT active matrix

0.51(H) x 0.51(V)mm

160/120

28 ~ 47kHz

50 ~ 75Hz

16.7 Million

800 x 600@60Hz

800 x 600@75Hz

480i, 480p, 576i, 576p

500mVrms

AC 100V ~ 240V (50 / 60Hz)

45W

<3W

40W

<3W

55W

<3W

360.2 x 64.2 x 338.6 mm

(14.18 x 2.53 x 13.33 inch)

360.2 x 192.9 x 396.5 mm

(14.18 x 7.59 x 15.61 inch)

3.6 kg (7.94 lbs)

416.7x 71.8 x 392.9 mm

(16.40 x 2.82 x 15.46 inch)

416.7 x 192.9 x 423.8 mm

(16.40 x 7.59 x 16.68 inch)

4.95 kg (10.91 lbs)

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

RCA Jack (L, R), 0.5Vrms(-9dB)

3.5

ø Stereo Jack, 0.5Vrms(-9dB)

2.5W x 2

Max.10mW Output(3,5 ø Stereo Jack 32)

RF : 80Hz ~15kHz at -3dB

A/V : 80Hz ~20kHz at -3dB

479.0 x 74.7 x 436.4 mm

(18.86 x 2.94 x 17.18 inch)

479.0 x 226.0 x 463.0 mm

(18.86 x 8.90 x 18.23 inch)

7.45 kg (16.42 lbs)

English-46

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 47

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your Videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacture.

Mode(PC)

VGA

LS15M23C, 17M24C, 20M22C

SVGA

LS15M23C, 17M24C, 20M22C

XGA

LS15M23C, 17M24C

SXGA

LS17M24C

720X400

640X480

800X600

1024X768

1280X1024

Resolution

Horizontal

Frequency

(kHz)

Vertical

Frequency

(Hz)

31.469

37.500

46.875

37.879

48.363

60.023

63.981

79.976

70.087

59.940

75.000

60.317

60.004

75.029

60.020

75.025

Pixel

Clock

Frequency

(MHz)

28.322

25.175

31.500

49.500

40.000

65.000

78.750

108.000

135.000

Sync Polarity

(H/V)

- / +

- / -

+ / +

- / -

+ / +

+,- / -,+

+ / +

English-47

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 48

Retractable Stand

Note : The maximum tilt angle is 13 degrees in the backward direction.

Please do not tilt the TV outside the specified range. Using excessive force to tilt the

TV may cause permanent damage to the mechanical part of the stand.

< LS20M22C > model swivels left and right.

< LS15M23C / LS17M24C > < LS20M22C >

Using Your TV in Another Country

If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world.

A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies.

English-48

04-BN68-00633J-01Eng.qxd 7/25/04 11:28 AM Page 49

Using the Anti-Theft Kensington Lock

Cable

Figure 2

Figure 1

The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately.

The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.

1.

Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).

2.

Connect the Kensington lock cable.

3.

Fix the Kensington lock to a desk or a heavy stationary object.

Installing VESA compliant mounting devices

SCART

< LS15M23C / LS17M24C >

Mounting pad

< LS20M22C >

Align the mounting interface pad with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases.

English-49

04-BN68-00633J-01Eng.qxd 7/25/04 3:18 PM Page 50

Installing the Wall Mount Kit

(LS15M23C, LS17M24C)

Note : This installation is to be used when attaching the wall mount to a concrete wall.

When attaching to other building materials, please contact your nearest dealer.

Components

Please use provided components or parts to install the Wall Mount Kit.

Bracket Anchors : 3EA Screws : 3EA

How to assemble the Wall Mount Kit

1 Mark the location of hole on the wall using installation guide.

Make over 35mm- depth- hole on the marked location using

5.0-diameter drill.

Fix anchors on each hole on the wall.

Connect bracket to the wall with screws after fitting anchors into the bracket holes.

Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.

2 You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.

Installation Guide

3 When using LCD TV in stand-based form, place the product on a cushion or other soft materials. Then turn over stand following the arrow direction below only after pressing button on the connected part where LCD TV is attached to stand.

(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)

English-50

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 51

Installing the Wall Mount Kit

(LS15M23C, LS17M24C)

4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.

When bracket is assembled on the wall How to hang LCD TV up on a hook When installation is completed

5 Remove Installation Guide after completing setup of monitor on the wall.

6 Push the LCD TV up and shift to the right to detach it from bracket.

When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.

How to assemble the Wall Mount Kit

(1) Angle adjustment section of general stand-besd LCD TV

(2) Angle abjustment section while converting the form

(1->3, 3->1)

(3) Angle adjustment section of wall-mounted LCD TV

Picture(1) shows the adjustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).

Excessive tilting can turn LCD TV over which might cause damage to LCD TV.

Picture(2) shows the adjustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.

Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.

Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa.

- Click" sound indicates section change from 1 to 2 or 3 to 2(1->2, 3->2).

English-51

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 52

Installing the Wall Mount Kit

(LS20M22C)

Note : This installation is to be used when attaching the wall mount to a concrete wall.

When attaching to other building materials, please contact your nearest dealer.

Components

Please use provided components or parts to install the Wall Mount Kit.

Bracket Anchors : 4EA Screws : 4EA

How to assemble the Wall Mount Kit

1 Mark the location of hole on the wall using installation guide.

Make over 35mm- depth- hole on the marked location using

5.0-diameter drill.

Fix anchors on each hole on the wall.

Connect bracket to the wall with screws after fitting anchors into the bracket holes.

Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.

2 You may use LCD TV right after fixing it to the wall since stand is wrapped already turned over as shown in the picture below.

Installation Guide

(Turn over stand in the opposite direction after pressing button when using LCD TV in wall-mounted form as well.)

English-52

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 53

Installing the Wall Mount Kit

(LS20M22C)

4 Adjust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be completely fixed to the bracket.

When bracket is assembled on the wall How to hang monitor up on a hook When installation is completed

5 Remove Installation Guide after completing setup of LCD TV on the wall.

6 Push the LCD TV up and shift to the right to detach it from bracket.

When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.

How to adjust an angle

(1) Angle adjustment section of general stand-besd LCD TV

(2) Angle abjustment section while converting the form

(1->3, 3->1)

(3) Angle adjustment section of wall-mounted LCD TV

Picture(1) shows the adjustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).

Excessive tilting can turn LCD TV over which might cause damage to LCD TV.

Picture(2) shows the adjustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.

Picture(3) shows the adjustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.

Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wallmounted one or vice versa.

English-53

04-BN68-00633J-00Eng.qxd 6/8/04 10:04 AM Page 54

Memo

Hello! I am an AI chatbot specifically trained to assist you with the Samsung LS20M22C User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated