Samsung | BD-J5900 | User manual | Samsung Curved Blu-ray Disc Player J5900 User Manual

BD-J5900
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
Safety Information
Warning
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
~~ The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
-- Do not place this apparatus in a
confined space, such as a bookcase,
or built-in cabinet, unless proper
ventilation is provided.
-- Do not place this apparatus near or
over a radiator or heat register, or
where it is exposed to direct sunlight.
-- Do not place vessels (vases etc.)
containing water on this apparatus. A
water spill can cause a fire or electric
shock.
~~ Do not expose this apparatus to rain or place
it near water (near a bathtub, washbowl,
kitchen sink, or pool, etc.). If this apparatus
accidentally gets wet, unplug it and contact
an authorized dealer immediately.
~~ This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of
these batteries properly. Please contact
your local authorities for disposal or
recycling information.
2
This symbol indicates that
high voltage is present inside.
It is dangerous to make any
kind of contact with any internal part of this product.
This symbol indicates that
important literature concerning
operation and maintenance has
been included with this product.
~~ Do not overload wall outlets, extension
cords or adaptors beyond their capacity,
since this can result in fire or electric
shock.
~~ Route power-supply cords so that they
are not likely to be walked on or pinched
by items placed on or against them. Pay
particular attention to cords at the plug
end, at wall outlets, and the point where
they exit from the apparatus.
~~ To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the set due to lightning and
power line surges.
~~ Before connecting the AC power cord
to the DC adaptor outlet, make sure the
voltage designation of the DC adaptor
corresponds to the local electrical supply.
~~ Never insert anything metallic into the
open parts of this apparatus. Doing so
may create a danger of electric shock.
~~ To avoid electric shock, never touch the
inside of this apparatus. Only a qualified
technician should open this apparatus.
~~ Make sure to plug the power cord in until
it is firmly seated. When unplugging the
power cord from a wall outlet, always pull
on the power cord’s plug. Never unplug
by pulling on the power cord. Do not
touch the power cord with wet hands.
~~ If this apparatus does not operate
normally - in particular, if there are any
unusual sounds or smells coming from
it - unplug it immediately and contact an
authorized dealer or service center.
~~ Maintenance of Cabinet.
-- Before connecting other components to
this product, be sure to turn them off.
-- If you move your product suddenly
from a cold place to a warm place,
condensation may occur on the
operating parts and lens and cause
abnormal disc playback. If this occurs,
unplug the product, wait for two hours,
and then connect the plug to the
power outlet. Then, insert the disc, and
try to play back again.
~~ Be sure to pull the power plug out of the
outlet if the product is to remain unused
or if you are leaving the house for an
extended period of time (especially when
children, elderly, or disabled people will be
left alone in the house).
-- Accumulated dust can cause an
electric shock, an electric leakage,
or a fire by causing the power cord
to generate sparks and heat or the
insulation to deteriorate.
~~ Contact an authorized service center for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24
hours a day such as in an airport, a train
station, etc. Failing to do so may lead to
serious damage of your product.
~~ Use only a properly grounded plug and
wall outlet.
~~
~~
~~
~~
~~
~~
~~
~~
~~
~~
~~
-- An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power
plug must be readily accessible at all times.
Do not allow children to hang on the
product.
Store the accessories (battery, etc.) in a
location safely out of the reach of children.
Do not install the product in an unstable
location such as a shaky self, a slanted
floor, or a location exposed to vibration.
Do not drop or strike the product. If the
product is damaged, disconnect the
power cord and contact a service center.
To clean this apparatus, unplug the power
cord from the wall outlet and wipe the
product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals
can damage the appearance of the product
or erase the printing on the product.
Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
Do not dispose of batteries in a fire.
Do not plug multiple electric devices into
the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
There is danger of an explosion if you
replace the batteries used in the remote
with the wrong type of battery. Replace
only with the same or equivalent type.
WARNING - TO PREVENT
THE SPREAD OF FIRE,
KEEP CANDLES AND
OTHER ITEMS WITH
OPEN FLAMES AWAY
FROM THIS PRODUCT
AT ALL TIMES.
~~ WARNING - This product contains
chemicals known to the State of California
to cause cancer and reproductive toxicity.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure.
CAUTION :
~~ THIS PRODUCT USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE
IF DIRECTED. BE SURE TO OPERATE
PRODUCT CORRECTLY AS INSTRUCTED.
~~ THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations
when shielded cables and connectors
are used to connect the unit to other
equipment. To prevent electromagnetic
interference with electric appliances, such
as radios and televisions, use shielded
cables and connectors for connections.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
✎✎ NOTES
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Precautions
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face of
the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover
omitted if the cover is detachable. If a
replacement fuse cover is required, it must
be of the same colour as the pin face of the
plug. Replacement covers are available from
your dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
The product unit accompanying this user
manual is licenced under certain intellectual
property rights of certain third parties.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including AV
receivers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
11.Only use attachments/accessories
specified by the manufacturer.
12.Use only
with the cart,
stand, tripod,
bracket, or table
specified by the
manufacturer,
or sold with the
apparatus. When
a cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
13.Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14.Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
ƒƒ If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of
this product, the product cannot play the disc.
3
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
~~ Some viewers may experience discomfort
while viewing 3D TV such as dizziness,
nausea, and headaches.
If you experience any such symptom,
stop viewing 3D TV, remove the 3D Active
Glasses, and rest.
~~ Watching 3D images for an extended
period of time may cause eye strain. If
you feel eye strain, stop viewing 3D TV,
remove your 3D Active Glasses, and rest.
~~ A responsible adult should frequently
check on children who are using the 3D
function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have
the child stop viewing 3D TV and rest.
~~ Do not use the 3D Active Glasses
for other purposes (Such as general
eyeglasses, sunglasses, protective
goggles, etc.).
~~ Do not use the 3D function or 3D Active
Glasses while walking or moving around.
Using the 3D function or 3D Active
Glasses while moving around may cause
you to bump into objects, trip, and/or fall,
and cause serious injury.
~~ If you want to enjoy 3D content, connect
a 3D device (3D compliant AV receiver or
TV) to the player's HDMI OUT port using
a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
4
~~ The player outputs 3D signals only
through HDMI cable connected to the
HDMI OUT port.
~~ As the video resolution in 3D play mode
is fixed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.
~~ Some functions such as BD Wise,
screen size adjustment, and resolution
adjustment may not operate properly in
3D play mode.
~~ You must use a high-speed HDMI cable
for proper output of the 3D signal.
~~ Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46inch screen, stay 138 inches (11.5 feet)
from the screen.
~~ Place the 3D video screen at eye level for
the best 3D picture.
~~ When the player is connected to some 3D
devices, the 3D effect may not function
properly.
~~ This player does not convert 2D content
into 3D.
~~ "Blu-ray 3D" and "Blu-ray 3D" logo
are trademarks of the Blu-ray Disc
Association.
Contents
SAFETY INFORMATION
Picture Settings........................................ 11
Precautions................................................ 3
Network Settings...................................... 13
Warning...................................................... 2
Using the 3D function................................. 4
GETTING STARTED
Before using the User Manual..................... 5
Logos of Discs the player can play............. 5
Accessories................................................ 7
Front Panel................................................. 7
Rear Panel.................................................. 7
Remote Control.......................................... 8
Sound Settings......................................... 12
System Settings....................................... 16
Language Settings.................................... 17
Security Settings...................................... 17
General Settings....................................... 17
Support Settings...................................... 18
MEDIA PLAY
Playing a Commercially Recorded Disc..... 19
Playing Files on a USB Device.................. 19
CONNECTIONS
Playing a Disc with User Recorded
Content.................................................... 19
Connecting to an Audio System................. 9
Controlling Video Playback....................... 20
Connecting to a TV..................................... 8
Connecting to a Network Router................ 9
SETTINGS
Using DLNA.............................................. 20
Controlling Music Playback....................... 21
Playing Photo Contents............................ 22
The Setup Procedure................................ 10
APPENDIX
Accessing the Settings Menu................... 11
Specifications........................................... 24
Menu Navigation....................................... 10
Troubleshooting........................................ 23
Getting Started
Region Code
Before using the User Manual
Disc Types and Contents your player can play
Media
Disc Type
Blu-ray Disc
3D Blu-ray Disc
VIDEO
MUSIC
PHOTO
✎✎ NOTES
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing DivX,
MKV or MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
Disc
Type
Blu-ray
Disc
Disc types your player cannot play
~~ DVD-RAM
~~ Super Audio CD
(except CD layer)
~~ DVD-RW (VR mode) ~~ 3.9 GB DVD-R
for Authoring.
~~ CVD/CD-ROM/CDV/
CD-G/CD-I/LD (CDGs play audio only,
not graphics.)
Region
Code
A
B
C
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
ƒƒ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
ƒƒ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
ƒƒ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
ƒƒ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that
exceeds 25 Mbps.
ƒƒ Playback may not work for some types of discs, or when you use specific functions, such as angle
change and aspect ratio adjustment. Information about the discs is written in detail on the disc box.
Please refer to this if necessary.
ƒƒ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
~~ HD DVD
~~ DVD-ROM/PD/
MV, etc
Both players and discs are coded by
region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Number for this player is
displayed on the rear panel of the player.
DVDVIDEO
Logos of Discs the player
can play
Blu-ray Disc
BD-LIVE
3D Blu-ray Disc
DivX
Area
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
India, China, Russia, Central
and South Asia.
1
2
3
4
The U.S., U.S. territories and
Canada
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
Europe, Japan, the Middle
East, Egypt, Africa, Greenland
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
PAL broadcast System in U.K., France, Germany, etc.
Supported File Formats
Notes on the USB connection
~~ Your player supports USB storage media,
MP3 players, digital cameras, and USB card
readers.
~~ The player does not support folder or file
names longer than 128 characters.
~~ Some USB/External HDD/digital camera
devices may not be compatible with the
player.
~~ Your player supports the FAT16, FAT32, and
NTFS file systems.
~~ Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
~~ Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
~~ The player does not support the PTP
protocol.
5
~~ Do not disconnect a USB device during a "loading" process.
~~ The bigger the image resolution, the longer the image takes to display.
~~ This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from
commercial sites.
~~ Your player only supports video with a frame rate under 30fps (frames per second).
~~ Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
~~ Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible
with this player.
~~ If some USB devices require excessive power, they may be limited by the circuit safety
device.
~~ If playback from a USB HDD is unstable, provide additional power by plugging the HDD
into a wall socket.
If the problem continues, contact the USB HDD manufacturer.
~~ SAMSUNG is not responsible for any data file damage or data loss.
~~ Your player does not support NTFS compressed files, sparse files, or encrypted files.
~~ You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Video File Support
File Extension
6
Container
*.avi
AVI
*.mkv
MKV
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
MPEG
*.rmvb
RMVB
Video Codec
DivX 3.11/4/5/6
MP4v3
H.264 BP/MP/HP
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
RV8/9/10
(RV30/40)
Audio Codec
MP3
Dolby Digital
DTS
WMA
PCM
MP3
Dolby Digital
DTS
WMA
AAC
Resolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
MP1, 2
Dolby Digital
DTS
1920x1080
1920x1080
1920x1080
1920x1080
RealAudio 6
1920x1080
•• Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file
itself is corrupted.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video
playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
-- Depending on your country, RMVB format may not be supported.
•• Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
•• Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bit rate: 320kbps
„„ Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
✎✎ NOTES
ƒƒ Playback of some DivX, MKV or MP4 file may not be supported depending on their video resolution and
frame rate.
Music File Support
File
Extension
Container
Audio
Codec
*.mp3
MP3
MP3
*.wma
WMA
WMA
Support Range
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps
Front Panel
Picture File Support
File Extension
*.jpg
*.jpeg
*.jpe
Type
Resolution
JPEG
15360x8640
*.png
PNG
15360x8640
REMOTE CONTROL SENSOR
POWER BUTTON
AVCHD (Advanced Video Codec High Definition)
~~ This player can play back AVCHD format discs. These discs are normally recorded and
used in camcorders.
~~ The AVCHD format is a high definition digital video camera format.
~~ The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
~~ Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs
that use "x.v.Color" format.
~~ "x.v.Color" is a trademark of Sony Corporation.
~~ "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
✎✎ NOTES
ƒƒ Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
ƒƒ "x.v.Color" offers a wider colour range than normal DVD camcorder discs.
DISC TRAY
USB HOST
OPEN/CLOSE BUTTON
✎✎ NOTES
ƒƒ You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
ƒƒ Please open and pull out the USB cover before inserting USB device.
Rear Panel
Accessories
Check for the supplied accessories shown below.
HDMI OUT
AUDIO
BONUS
VIEW
HDMI Cable
Batteries for Remote
Control (AAA Size)
User Manual
HOME
REPEAT
A-B
REPEAT
LAN
DIGITAL AUDIO OUT
SUBTITLE
FULL
SCREEN
Remote Control
7
Connections
Remote Control
Tour of the Remote Control
Connecting to a TV
Turn the player on and off.
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press to open and close the disc tray.
Press numeric buttons to operate options.
Use to enter the popup menu/title menu.
Use to enter the disc menu.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
AUDIO
HOME
SUBTITLE
Press to use Tools menu.
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
Allows you to repeat A-B disc.
Installing batteries
!!
8
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Audio
Video
Press to exit the menu.
Return to the previous menu.
✎✎ NOTES
Press to move to the home menu.
Use to display the playback information.
Use to select menu items and change menu
values.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use Bonusview function.
Connect an HDMI cable from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the
other connections.
-- When you change the connections, turn off all devices before you start.
ƒƒ If the remote does not operate properly:
• Check the polarity (+/–) of the batteries.
Press to see the full screen on a TV.
During Blu-ray or DVD disc playback, the
Full screen button does not operate.
Allows you to repeat a title, chapter, track or
disc.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
CAUTION
ƒƒ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash
ƒƒ Do not dispose of batteries in a fire.
ƒƒ Do not short circuit, disassemble or overheat the batteries.
ƒƒ Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
✎✎ NOTES
ƒƒ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital
Audio Out on the player to an audio system to hear audio.
ƒƒ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
ƒƒ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
ƒƒ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
ƒƒ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
ƒƒ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
ƒƒ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
Connecting to an Audio System
Connecting to a Network Router
You can connect the Blu-ray player to an audio system using one of the
methods illustrated below.
-- Do not connect the power cord to the wall outlet until you have made all the
other connections.
-- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI compatible AV receiver
You can connect your player to your network router using one of the methods
illustrated below.
To use the DLNA network functionality, you must connect your PC to your
network as shown in the illustrations.
The connection can be wired or wireless.
Wired Network
~~ Connect an HDMI cable from the HDMI OUT jack on the back of the product
to the HDMI IN jack on your receiver.
~~ Best quality (Recommended)
Broadband modem
(with integrated router)
Method 2 Connecting to an AV receiver with a Digital Coaxial Cable
~~ Using a digital Coaxial cable (Not supplied), connect the Coaxial Digital Audio
Out jack on the product to the Digital Coaxial In jack of the receiver.
~~ Good quality
~~ You will hear sound only through the front two speakers with Digital Output
set to PCM.
Broadband
service
Or
Router
Broadband
modem
Method 1
Audio
Method 2
Audio
Broadband
service
✎✎ NOTES
ƒƒ Internet access to Samsung's software update server may not be allowed, depending on the router you use or
your ISP's policy. For more information, contact your ISP (Internet Service Provider).
ƒƒ DSL users, please use a router to make a network connection.
9
Settings
Wireless Network
The Setup Procedure
Wireless Router
Broadband service
✎✎ NOTES
ƒƒ If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the
wireless network.
ƒƒ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
ƒƒ The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
ƒƒ Select a channel on the wireless router that is not currently being used. If the channel set for the
wireless router is currently being used by another device nearby, it will result in interference and
communication failure.
ƒƒ If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance
with new Wi-Fi certification specifications.
ƒƒ Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router
performance, distance, obstacles, interference by other radio devices, etc).
10
ƒƒ If you want to use the Anynet+(HDMI-CEC)
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On
in both the TV and the player.
3) Set the TV to the Setup Procedure.
ƒƒ If you leave the player in the stop mode
for more than 5 minutes without using it,
a screen saver will appear on your TV. If
the player is left in the screen saver mode
for more than 25 minutes, the power will
automatically turn off.
~~ The Home screen will not appear if you do
not configure the setup.
~~ The OSD (On Screen Display) may change
in this player after you upgrade the
software version.
~~ The access steps may differ depending on
the menu you selected.
~~ After the setup process is complete, the panel
buttons and remote control can be operated.
After you have connected the player
to your TV, turn on the TV and player.
When you turn on the player the first
time, the player's Setup screen appears
on the TV. The Setup procedure lets you
set the On Screen Display (OSD) and
menu languages, the aspect ratio (screen
size), the network type, and connect the
player to your network.
✎✎ NOTES
ƒƒ The Home menu will not appear if you do not
configure the setup except as noted below.
ƒƒ If you press the BLUE (D) button during
network setup, you can access the Home menu
even if the network setup is not completed yet.
ƒƒ When you return to the Home menu, the full
screen mode is cancelled automatically.
ƒƒ If you want to display the Setup screen again
to make changes, press the ^ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
ƒƒ After the setup process is complete. you can
operate the HDMI-CEC function.
Menu Navigation
AUDIO
HOME
SUBTITLE
1
3
2
4
HOME VIEW
ButtonA-B: Press to move
to the Home
SCREEN
menu.
BONUS
1
2
3
4
REPEAT
REPEAT
FULL
RETURN Button : Return to the previous menu.
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
EXIT Button : Press to exit the current menu.
~~ Home Menu
6
1
PLAY DISC
PHOTOS
VIDEOS
MUSIC
2
7
No Disc
8
App 1
App 2
App 3
App 4
App 5
Screen Mirroring Change Device
1
Selects VIDEOS.
2
Selects MUSIC.
3
Selects Settings.
4
Selects Change Device.
5
Selects Screen Mirroring.
6
Selects PHOTOS.
7
Selects PLAY DISC.
8
Selects applications.
Settings
3
4
5
✎✎ NOTES
ƒƒ The Videos, Photos, and Music options
require that you have an appropriate disc
inserted into the player or a USB flash device
attached to the player.
Accessing the Settings
Menu
To access the Settings menu and submenus, follow these steps:
1. Press the POWER button.
The Home Menu appears.
2. Press the ▲▼◄► buttons to select
Settings, and then press the v button.
3. Press the ▲▼ buttons to select
the desired submenu, and then
press the v button.
4. Press the ▲▼ buttons to select the
desired item, and then press the v
button.
5. Press the EXIT button to exit the
menu.
✎✎ NOTES
ƒƒ The access steps may differ depending on
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
Picture Settings
You can configure various display
options such as the TV Aspect Ratio,
Resolution, etc.
3D Settings
Select whether to play a Blu-ray Disc
with 3D contents in 3D Mode.
✎✎ NOTES
ƒƒ For some 3D discs, to stop a movie during
3D playback, press the 5 button once.
The movie stops and the 3D mode option is
de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5
button again, then select 3D Settings in the
Blu-ray menu.
ƒƒ Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
Depending on the type of television
you have, you may want to adjust the
screen size setting.
✎✎ NOTES
ƒƒ Depending on the disc type, some aspect
ratios may not be available.
ƒƒ If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest interconnectivity feature.
When you connect a Samsung player
and a Samsung TV with BD Wise to
each other via HDMI, and BD Wise
is on in both the player and TV, the
player outputs video at the video
resolution and frame rate of the Bluray Disc/DVDs.
✎✎ NOTES
ƒƒ When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.
ƒƒ If the player is connected to a device that does not
support BD Wise, you cannot use the BD Wise function.
ƒƒ For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of
the HDMI video signal to Auto, 1080p,
1080i, 720p or 576p/480p. The number
indicates the number of lines of video
per frame. The i and p indicate interlaced
and progressive scan, respectively. The
more lines, the higher the quality.
Resolution according to the output
mode
~~ Blu-ray Disc/E-contents/Digital
Contents playback
HDMI / connected
Output
HDMI Mode
Blu-ray
Disc
Setup
BD Wise
Auto
Resolution of
Blu-ray Disc
E-contents/
Digital
contents
1080p
Max. Resolution Max. Resolution
of TV input
of TV input
1080p@60F
1080p@60F
(Movie Frame : Off)
1080p@60F
Movie Frame :
Auto (24 fps)
1080p@24F
1080p@24F
1080i
720p
1080i
1080i
576p/480p
720p
576p/480p
576p/480p
~~ DVD playback
720p
Output
Setup
HDMI / connected
Auto
Max. Resolution of TV input
1080i
1080i
BD Wise
1080p
720p
576p/480p
HDMI Mode
576i/480i
1080p
720p
576p/480p
11
✎✎ NOTES
ƒƒ If the TV you connected to the player does
not support Movie Frame or the resolution
you selected, the message "If no pictures are
shown after selecting ‘Yes’, please wait for 15
seconds to return to the previous resolution."
appears. If you select Yes, the TV’s screen
will go blank for 15 seconds, and then the
resolution will revert to the previous resolution
automatically.
ƒƒ If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the ^ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display
Setup that your TV will support.
ƒƒ When the factory default settings are
restored, all stored user BD data is deleted.
ƒƒ The Blu-ray Disc must have the 24 frame feature for
the player to use the Movie Frame (24 fps) mode.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps)
feature to Auto allows you to adjust
the player’s HDMI output to 24 frames
per second for improved picture
quality.
You can enjoy the Movie Frame (24
fps) feature only on a TV supporting
this frame rate. You can select Movie
Frame only when the player is in the
HDMI 1080p output resolution modes.
12
HDMI Colour Format
Lets you set the colour space
format for HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
Digital Output Selection
Setup
Connection
HDMI Deep Colour
Lets you output video from the HDMI
OUT jack with Deep Colour. Deep
Colour provides more accurate colour
reproduction with greater colour depth.
Progressive Mode
PCM
Audio
Stream on
Blu-ray Disc
HDMI
Receiver
Coaxial
Up to 7.1ch PCM 2ch
Dolby Digital
PCM 2ch
PCM 2ch
Dolby Digital
Plus
PCM 2ch
PCM 2ch
Dolby TrueHD
PCM 2ch
PCM 2ch
DTS
PCM 2ch
PCM 2ch
Lets you improve picture quality when
viewing DVDs.
DTS-HD High
Resolution
Audio
PCM 2ch
PCM 2ch
Sound Settings
DTS-HD
Master Audio
PCM 2ch
PCM 2ch
Audio
Stream on
DVD
PCM
PCM 2ch
PCM 2ch
Dolby Digital
PCM 2ch
PCM 2ch
DTS
PCM 2ch
PCM 2ch
Definition for
Blu-ray Disc
Any
Decodes main feature
audio and BONUSVIEW
audio stream together
into PCM audio and
add Navigation Sound
Effects.
Digital Output
Lets you select the digital audio output
format that is suitable for your TV or
AV Receiver. For more details, please
refer to the Digital Output Selection
table.
Bitstream
(Re-encoded
Dolby D)
HDMI supported
HDMI
HDMI Receiver or
Coaxial
AV receiver or
Receiver
Coaxial
Coaxial
Re-encoded
PCM
PCM 2ch Re-encoded DTS
Dolby Digital *
Dolby
Dolby
Re-encoded
Re-encoded DTS
Digital
Digital
Dolby Digital *
Dolby Digital Dolby
Re-encoded
Re-encoded DTS
Plus
Digital
Dolby Digital *
Dolby
Dolby
Re-encoded
Re-encoded DTS
TrueHD
Digital
Dolby Digital *
Re-encoded
DTS
DTS
Re-encoded DTS
Dolby Digital *
DTSHD High
Re-encoded
DTS
Re-encoded DTS
Resolution
Dolby Digital *
Audio
DTS-HD
Re-encoded
Master
DTS
Re-encoded DTS
Dolby Digital *
Audio
PCM 2ch PCM 2ch
PCM 2ch
PCM 2ch
Dolby
Dolby
Dolby Digital
Dolby Digital
Digital
Digital
DTS
DTS
DTS
DTS
Decodes main
Decodes main
Outputs only main
feature audio and
feature audio and
feature audio stream
BONUSVIEW audio BONUSVIEW audio
so that your AV receiver
stream together into stream together into
can decode the audio
PCM audio and add PCM audio and add
bitstream.
Navigation Sound
Navigation Sound
You will not hear
Effects, then reEffects, then reBONUSVIEW audio
encodes the PCM
encodes the PCM
and Navigation Sound
audio into DTS
audio into Dolby
Effects.
bitstream
Digital bitstream
Bitstream
(Unprocessed)
PCM
Bitstream
(Re-encoded
DTS)
** If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation
Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.
✎✎ NOTES
ƒƒ Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
ƒƒ If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
ƒƒ Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
ƒƒ Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
ƒƒ If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
ƒƒ If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Reencoded or Unprocessed) in the setup menu.
ƒƒ If your TV is not compatible with PCM
sampling rates over 48kHz, the player may
output 48kHz downsampled PCM audio even
though you set PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM
signals downsampled to 48KHz before
they are outputted to an amplifier.
Choose On if your amplifier or receiver
is not compatible with a 96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control
to Dolby Digital, Dolby Digital Plus,
and Dolby TrueHD audio.
~~ Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
~~ Off : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
~~ On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel
downmix method that is compatible
with your stereo system. You can
choose to have the player downmix
to normal stereo or to surround
compatible stereo.
Network Settings
To begin setting up the network
connection for your player, follow
these steps:
1. In the Home menu, press the
▲▼◄► buttons to select Settings,
and then press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Network Settings, and then press
the v button.
4. Press the ▲▼ buttons to select
Network Type, and then press the
v button.
5. Press the ▲▼ buttons to select
Wired or Wireless, and then press
the v button.
6. Go to the next section.
Configuring Your Network
Connection
Before you begin, contact your ISP
to find out if your IP address is static
or dynamic. If it is dynamic, and you
have a wired or wireless network,
we recommend using the Automatic
configuration procedures described
below.
If you are connecting to a wired
network, connect the player to your
router using a LAN cable before you
start the configuration procedure.
If you are connecting to a wireless
network, disconnect any wired
network connection before you begin.
To begin configuring your network
connection, follow these steps:
Wired Network
ĞĞ
Wired - Automatic
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press
the v button.
3. Select Network Settings, and
then press the v button.
4. Select Wired in the Network
Settings screen, and then press
the v button.
5. Select Connect button, and then
press the v button. The product
detects the wired connection,
verifies the network connection
and then connects to the network.
ĞĞ
Wired - Manual
If you have a static IP address or the
Automatic procedure does not work,
you'll need to set the Network Settings
values manually.
Follow Steps 1 and 2 in Wired Automatic, and then follow these steps:
1. Select Network Status. The
player searches for a network, and
then displays the connection failed
message.
2. On the bottom of the screen,
select IP Settings, and then press
the v button.
The IP Settings screen appears.
3. Select the IP Setting field, and
then press the v button.
4. Select Enter manually in the IP
Setting field, and then press the
v button.
5. Select a value to enter (IP
Address, for example), and then
press the v button.
Use the number keypad on
your remote control to enter
the numbers for the value. Use
the ◄► buttons on the remote
control to move from entry field
to entry field within a value. When
done with one value, press the v
button.
6. Press the ▲ or ▼ button to
move to another value, and then
enter the numbers for that value
following the instructions in Step 5.
7. Repeat Steps 5 and 6 until you
have filled in all values.
13
✎✎ NOTES
Network Settings
ƒƒ You can get the Network values from your
Internet provider.
8. When finished entering all the
values, and then press the
RETURN or EXIT buttons.
The player verifies the network
connection and then connects to
the network.
Wireless Network
You can setup a wireless network
connection in four ways:
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
-- WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently connected
through the player or, if applicable, the
player's current wired connection, will
be disconnected.
ĞĞ
Wireless - Automatic
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press
the v button.
3. Select Network Settings, and
then press the v button.
4. Select Wireless in the Network
Settings screen, and then press
the v button. The player
searches for and then displays a
list of the available networks.
14
Select your network type.
Network Type
Wireless
Wireless network
Add Network
WPS(PBC)
You can connect your Blu-ray
player to the internet. Please
select which wireless network
to use.
Search
m Move " Select ' Return
5. Select the desired network, and
then press the v button.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing v button.
7. When done, select Done and then
press the v button. The player
verifies the network connection
and then connects to the network.
8. When verification is complete, select
OK, and then press the v button.
✎✎ NOTES
ƒƒ You should be able to find the Security Code
or Pass Phrase on one of the set up screens
you used to set up your router or modem.
ĞĞ
Wireless - Manual
If you have a static IP address or the
Automatic procedure does not work,
you'll need to set the Network Settings
values manually.
1. Follow the directions in Wireless Automatic through Step 5.
2. The player searches for a network,
and then displays the connection
failed message.
3. On the bottom of the screen,
select IP Settings, and then press
the v button.
The IP Settings screen appears.
4. Select the IP Setting field, and
then press the v button.
5. Select Enter manually in the IP
Setting field, and then press the
v button.
6. Select a value to enter (IP
Address, for example), and then
press v button. Use the number
keypad on your remote control to
enter the numbers for the value.
Use the ◄► buttons on the
remote control to move from entry
field to entry field within a value.
When done with one value, press
the v button.
7. Press the ▲ or ▼ button to
move to another value, and then
enter the numbers for that value
following the instructions in Step 6.
8. Repeat Steps 6 and 7 until you
have filled in all values.
✎✎ NOTES
ƒƒ You can get the Network values from your
Internet provider.
9. When finished, and then press
the RETURN or EXIT button. The
Security Screen appears.
10.On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◄► buttons, and
then pressing the v button.
11.When finished, select Done at the
right of the screen, and then press
the v button.
The player verifies the network
connection and then connects to
the network.
12.After the player verifies the
network, select OK, and then
press the v button.
ĞĞ
WPS(PBC)
1. In the Home screen, select
Settings, and then press the v
button.
2. Select Network, and then press
the v button.
3. Select Network Settings, and
then press the v button.
4. Select Wireless in the Network
Settings screen, and then press
the v button.
5. Press the ▲▼ button on your
remote, and then press the ◄►
button to select the WPS(PBC).
6. Press the v button on your
remote. The "Press the PBC
button" message appears.
7. Press the WPS(PBC) button on
your router within two minutes. Your
player automatically acquires all the
network settings values it needs
and connects to your network.
The Network Status screen
appears. The player connects
to the network after the network
connection is verified.
ĞĞ
WPS(PIN)
Before you begin, open the router's
setup menu on your PC and access the
screen with the WPS PIN entry field.
1. In the Home screen, select
Settings, and then press the v
button.
2. Select Network, and then press
the v button.
3. Select Network Settings, and
then press the v button.
4. Select Wireless in the Network
Settings screen, and then press
the v button.
The player searches for and then
displays a list of the available
networks.
5. Select the desired network, and
then press the ► button.
6. Select the WPS(PIN), and then
press the v button. The PIN
pop-up appears.
7. Enter the PIN into the WPS PIN
entry field in the router's Set Up
screen and then save the the
screen.
✎✎ NOTES
ƒƒ Contact the manufacturer of the router for
instructions explaining how to access the
route's Set Up screens or refer to the router's
user's manual.
ƒƒ For WPS connection, set your wireless
router’s security encryption to AES. Setting
to WEP security encryption does not support
WPS connection.
Network Test
Use this menu item to check whether
your network connection is working or
not.
Network Status
Use to check whether a connection to
a network and the Internet has been
established.
Wi-Fi Direct
The Wi-Fi Direct function allows you
to connect Wi-Fi Direct devices to the
player and each other using a peerto-peer network, without a wireless
router.
✎✎ NOTES
ƒƒ Some Wi-Fi Direct devices may not support
the DLNA function if connected via WiFi Direct. If this is the case, it is advisable
to change the network connection method
between devices.
ƒƒ Bluetooth transmissions can interfere with
the Wi-Fi Direct signal. Before you use the
Wi-Fi Direct function, we strongly recommend
that you turn off the Bluetooth function of any
active mobile device.
1. Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
2. In the Home screen, select
Settings, and then press the v
button.
3. Select Network, and then press
the v button.
4. Select Wi-Fi Direct, and then
press the v button.
The Wi-Fi Direct devices that you
can connect appear.
5. You have three ways to complete
the Wi-Fi connection:
• Through the Wi-Fi device.
• Through the player using PBC.
• Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the
procedure on the device for
connecting to another Wi-Fi Direct
device. See the device's user
manual for instructions.
2. When you have completed the
procedure, you should see a popup on your TV screen saying that
a device that supports Wi-Fi Direct
has requested to connect. Select
OK, and then press the v button
to accept.
3. The Connecting pop-up appears,
followed by the Connected popup. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using PBC
1. Select the Wi-Fi Direct device you
want to connect to this player, and
then press the v button. The
PBC/PIN pop up appears.
2. Select PBC, and then press the
v button. The PBC pop-up
appears.
3. Press the PBC button on the Wi-Fi
Direct device within 2 minutes.
4. The Connecting pop-up appears,
followed by the Connected popup. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using a PIN
1. Select the Wi-Fi Direct device you
want to connect to this player, and
then press the v button. The
PBC/PIN pop up appears.
2. Select PIN, and then press the v
button. The PIN pop-up appears.
3. Note the PIN code in the popup, and then enter it into the
appropriate field in the Wi-Fi Direct
device you want to connect.
4. The Connecting pop-up appears,
followed by the Connected popup. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected.
15
✎✎ NOTES
ƒƒ The current wired or wireless network
connection will be disconnected when you
use the Wi-Fi Direct function.
ƒƒ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
Screen Mirroring
The Screen Mirroring function lets you
view the screen of your smart phone
or android tablet on the TV you have
connected to the Blu-ray player.
1. In the Home menu, press the
▲▼◄► buttons to select Screen
Mirroring, and then press the v
button. The Screen Mirroring popup appears.
2. Launch DLNA Cast on your
device.
3. On your device, find the name
of the Blu-ray player in the list of
available devices and then select it.
4. The TV will display a PIN. Enter the
PIN into your device.
5. The TV displays a connecting
message (for example, Connecting
to Android_92gb...) and then
displays the connected message.
6. In a few moments, the screen of
your device appears on the TV
screen.
7. To stop Screen Mirroring, press
the EXIT or RETURN button on
the remote control, or disable
Screen Mirroring function of your
smart phone.
16
✎✎ NOTES
ƒƒ You can connect to a device that supports
DLNA Cast. Note that connecting to such a
device may not be fully supported depending
on the manufacturer. For further information
on mobile connection support, refer to the
manufacturer’s web site.
ƒƒ When you are using the Screen Mirroring
function, video stuttering or audio dropouts
may occur, depending on your environment.
ƒƒ Bluetooth transmissions can interfere with the
Screen Mirroring signal. Before using the Screen
Mirroring function, we strongly recommend
that you turn off the Bluetooth function on your
smart phone or smart device (tablet, etc.).
Device Name
Device Name function allows you to
change player's name by selecting
from device name list.
BD-Live Internet Connection
Set to allow or prohibit an Internet
connection when you use the BD-LIVE
service.
~~ Allow (All) : The Internet connection
is allowed for all BD-LIVE contents.
~~ Allow (Valid Only) : The Internet
connection is allowed only for BDLIVE contents containing a valid
certificate.
~~ Prohibit : No Internet connection is
allowed for any BD-LIVE content.
✎✎ NOTES
ƒƒ What is a valid certificate?
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
ƒƒ The Internet connection may be restricted
while you are using BD-LIVE contents.
Using BD-LIVE™
Once the player is connected to the
network, you can enjoy various movierelated service contents using a BDLIVE compliant disc.
1. Attach a USB memory stick to
the USB jack on the front of the
player, and then check its remaining
memory. The memory device must
have at least 1GB of free space
to accommodate the BD-LIVE
services.
2. Insert a Blu-ray Disc that supports
BD-LIVE.
3. Select an item from various BDLIVE service contents provided by
the disc manufacturer.
✎✎ NOTES
ƒƒ The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
The DLNA Function
DLNA lets you play music, video, and
photo files located in your PC on the
player.
To use DLNA with your player, you must
connect the player to your network.
(See page 13-16).
To use DLNA with your PC, you must
install DLNA software on your PC.
System Settings
Setup
By using the Setup function, you can
set the language, Network Settings,
etc.
For more information about the Setup
function, refer to the Setup section of
this user manual (See page 10).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎✎ NOTES
ƒƒ If this function is set to On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function
that offers linked operations with
other Samsung players that have the
Anynet+ feature.
To operate this function, connect this
player to an Anynet+ Samsung TV with
an HDMI cable.
With Anynet+ on, you can operate this
player using a Samsung TV remote
control and start disc playback simply
by pressing the PLAY (
) button
on the TV’s remote control.
For more information, please see the
TV user manual.
✎✎ NOTES
ƒƒ This function is not available if the HDMI
cable does not support CEC.
ƒƒ If your Samsung TV has an Anynet+ logo,
then it supports the Anynet+ function.
ƒƒ Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
ƒƒ After the product was turned off,
disconnecting and connecting the power
cable turns it on automatically. At the moment,
it automatically turns off in about 15 seconds
for re-establishing Anynet+ connection.
ƒƒ For some TV products, if connected to this
product with Anynet+ function, turning the
TV on may display a warning popup message
saying no connection was found. Still,
Anynet+ connection is properly established
and available to use.
BD Data Management
Enables you to manage the
downloaded contents you accessed
through a Blu-ray disc that supports
the BD-LIVE service and stored on a
flash drive.
You can check the device’s information
including the storage size, delete the
BD data, or change the Flash memory
device.
✎✎
NOTES
ƒƒ In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
ƒƒ Your player supports the FAT16, FAT32, and
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
ƒƒ The Resume Play function may not work after
you format the storage device.
ƒƒ The total memory available to BD Data
Management may differ, depending on the
conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes
to purchase and play DivX® VOD
contents.
Language Settings
You can select the language you
prefer for the On-Screen menu, disc
menu, audio, and subtitles.
✎✎ NOTES
ƒƒ The selected language will only appear if it is
supported on the disc.
Security Settings
The default security PIN is 0000. Enter
the default PIN to access the security
function if you haven't created your
own PIN. After you have accessed the
security function for the first time, change
the PIN using the Change PIN function.
BD Parental Rating
Prevents playback of Blu-ray Discs
with specific age ratings unless the 4
digit PIN is entered.
DVD Parental Rating
A larger number indicates more
mature content.
Change PIN
Change the 4-digit password used to
access security functions.
If you forget your password
1. Remove any discs.
2. Press and hold the ^ button on
the front panel for 5 seconds or
more.
All settings will revert to the factory
settings.
✎✎ NOTES
ƒƒ When the factory default settings are
restored, all the user stored BD data will be
deleted.
General Settings
Time Zone
Lets you specify the time zone that is
This function works in conjunction with
DVDs that have been assigned an age applicable to your area.
rating or numeric rating that indicates
the maturity level of the content. These
numbers help you control the types of
DVDs that your family can watch.
Select the rating level you want to set. For example, if you select Level 6,
discs rated above 6 - Level 7 and 8 will not play.
17
Support Settings
Software Upgrade
The Software Upgrade menu allows
you to upgrade the player’s software
for performance improvements or
additional services.
By Online
To upgrade By Online, follow these
steps:
1. In the player’s menu, go to
Settings > Support > Software
Upgrade.
2. Select By Online, and then press
the v button. The Connecting to
Server message appears.
3. A popup message will appear if an
update is available.
4. If you select Yes, download
process started. (Never turn the
player on during an upgrade.)
5. When the update is completed,
the player will restart automatically.
✎✎ NOTES
ƒƒ The upgrade is complete when the player
turns off, and then turns on again by itself.
ƒƒ Never turn the player off or back on manually
during the update process.
ƒƒ Samsung Electronics takes no legal
responsibility for player malfunction caused
by an unstable Internet connection or
consumer negligence during a software
upgrade.
ƒƒ No disc should be in the product when you
upgrade the software By Online.
18
By USB
To upgrade by USB, follow these
steps:
1. Visit www.samsung.com/
bluraysupport.
2. Download the latest USB software
upgrade zip archive to your
computer.
3. Unzip the zip archive to your
computer. You should have a
single RUF file with the same name
as the zip file.
4. Copy the RUF file to a USB flash
drive.
5. Make sure there is no disc in the
player, and then insert the USB
flash drive into the USB port of the
player.
6. In the player’s menu, go to
Settings > Support > Software
Upgrade.
7. Select By USB.
✎✎ NOTES
ƒƒ No disc should be in the product when you
upgrade the software using the USB Host
jack.
ƒƒ When the software upgrade is done, check
the software details in the software Upgrade
menu.
ƒƒ Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
ƒƒ Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player
to your network, and then set Auto
Upgrade Notification on, the player
automatically notifies you when a new
software version is available for the
player.
To set Auto Upgrade Notification on,
follow these steps:
1. Select Auto Upgrade
Notification, and then press the
v button.
2. Use the ▲▼ buttons to select On,
and then press the v button.
If there is a new software version
available, the player notifies you with a
popup message.
1. To upgrade the firmware, select
Yes in the Pop-up. The player
turns off automatically, then
restarts, and begins the download.
(Never turn the player on or off
manually during an upgrade.)
2. The update progress popup
appears.
3. When the update is completed,
the player will restart automatically.
✎✎ NOTES
ƒƒ The upgrade is complete when the player
turns off, and then turns on again by itself.
ƒƒ Never turn the player off or on manually
during the update process.
ƒƒ Samsung Electronics takes no legal
responsibility for player malfunction caused
by an unstable Internet connection or
consumer negligence during software
upgrade.
Contact Samsung
Provides contact information for
assistance with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
Reset
Returns all settings to their factory
defaults except for the network
settings.
Media Play
Playing a Commercially
Recorded Disc
1. Press the 8 button to open the
disc tray.
2. Place a disc gently into the disc
tray with the disc's label facing up.
3. Press the 8 button to close
the disc tray. Playback starts
automatically.
Playing Files on a USB
Device
There are two methods you can use
to play or view multimedia files located
on a USB device through your player.
Method 1
1. Turn the player on.
2. Connect the USB device to the
USB port on the front panel of the
player. The New Device Connected
pop-up appears.
PLAY DISC
PHOTOS
VIDEOS
New device connected.
Photos
MUSIC
123
Videos
No Disc
Music
> Move " Enter ' Return
App 1
App 2
App 3
App 4
App 5
Screen Mirroring Change Device
Settings
✎✎ NOTES
ƒƒ If the pop-up does not appear, go to Method 2.
3. Use the ▲▼ buttons to select
Photos, Videos or Music, and
then press the v button. The
Photos, Videos & Music screen
appears listing the content of the
device. Depending on how the
contents is arranged, you will see
either folders, individual files, or
both.
✎✎ NOTES
ƒƒ Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Photos,
Videos & Music screen and going to Step 3 in
Method 2 below.
4. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
5. Select a file to view or play, and
then press the v button.
6. Press the RETURN button to exit
a folder or the EXIT button to
return to the Home screen.
7. Go to pages 20~22 for instructions
that explain how to control
playback of videos, music, and
pictures on a USB device.
Method 2
1. Turn the player on.
2. Connect the USB device to the
USB port on the front panel of the
player. Select Change Device
and then press the ▲▼ button to
select USB. Press the v button.
PLAY DISC
PHOTOS
VIDEOS
MUSIC
Change Device
No Disc
123
App 1
App 2
App 3
App 4
✎✎ NOTES
ƒƒ If you insert a disc when playing a USB
device, the device mode changes to "Disc"
automatically.
a
No Disc
5. Use the ▲▼◄► buttons to select
a file to view or play, and then
press the v button.
6. Press the RETURN button to exit
a folder or the EXIT button to
return to Home screen.
7. Go to pages 20~22 for instructions
that explain how to control
playback of videos, music, and
pictures on a USB device.
App 5
More
Close
Screen Mirroring Change Device
Settings
3. Use the ▲▼◄► buttons to select
PHOTOS, VIDEOS or MUSIC
on the Home screen, and then
press the v button. The Photos,
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
is arranged, you will see either
folders, individual files, or both.
✎✎ NOTES
ƒƒ Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Photos,
Videos & Music screen and repeating Step 3.
4. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
Playing a Disc with User
Recorded Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into
the disc tray with the disc’s label
facing up, and then close the tray.
2. Use the ◄► buttons to select the
type of content you want to view
or play - VIDEOS, PHOTOS, or
MUSIC - and then press the v
button.
✎✎ NOTES
ƒƒ Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 2. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Home
screen and repeating Step 2.
19
3. A screen appears listing the
contents of the disc. Depending
on how the contents are arranged,
you will see either folders,
individual files, or both.
4. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
5. Use the ◄►▲▼ buttons to select
a file to view or play, and then
press the v button.
6. Press the RETURN button one
or more times to exit a current
screen, exit a folder, or to return to
the Home screen. Press the EXIT
button to return directly to the
Home Screen.
7. Go to pages 20~22 for instructions
that explain how to control
playback of videos, music, and
pictures on a disc.
Using DLNA
PC
Blu-ray Disc Player
Play back PC's
files
DLNA Connection
1. Connect the Blu-ray Disc Player,
your PC, and/or your DLNA
compatible device to the same
wireless network.
20
2. Follow the directions in the DLNA
software Installation/Instruction
manual to set up devices and files
for playing or viewing.
3. Select Change Device on the
player's Home screen, and then
press the v button. In the list
of DLNA connected devices that
appears, select your PC or other
DLNA compatible device, and then
press the v button.
4. Use the ◄► buttons to select the
type of content you want to view
or play - VIDEOS, PHOTOS, or
MUSIC - and then press the v
button.
✎✎ NOTES
ƒƒ Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 4. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Home
screen and repeating Step 4.
5. A screen appears listing the
contents of the PC or DLNA
device. Depending on how the
contents are arranged, you will see
either folders, individual files, or
both.
6. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
7. Use the ◄►▲▼ buttons to select
a file to view or play, and then
press the v button.
8. Press the RETURN button one
or more times to exit a current
screen, exit a folder, or to return to
the Home screen. Press the EXIT
button to return directly to the
Home Screen.
9. Go to pages 20~22 for instructions
that explain how to control
playback of videos, music, and
pictures on a disc.
Controlling Video Playback
You can control the playback of
video content located on a Blu-ray
disc, DVD, CD, USB device, or your
computer. Depending on the media,
some of the functions described in this
manual may not be available.
During Blu-ray or DVD disc playback,
the Full screen button does not
operate.
Buttons on the Remote Control
used for Video Playback
2
1
AUDIO
HOME
SUBTITLE
Playback related buttons
The player does not play sound in
Search, Slow or Step mode.
~~ To return to normal speed playback, press
the 6 button.
6 button
Starts playback.
7 button
Pauses playback.
5 button
Stops playback.
During playback, press the 3 or
4 button.
Fast Motion
Each time you press the 3 or
Play
4 button, the playback speed will
change.
In pause mode, press the 4
Slow Motion button.
Play
Each time you press the 4 button,
the playback speed will change.
In pause mode, press the 7
Step Motion button.
Play
Each time you press the 7 button,
a new frame appears.
During playback, press the 1 or
2 button.
Skip Motion
Each time you press the 1 or
Play
2 button, the disc moves to the
previous or next chapter or file.
Using the disc menu, title menu,
popup menu, and title list
DISC MENU
button
During playback, press this button
to start the disc menu function.
TITLE MENU During playback, press this button
button
to start the title menu function.
POPUP MENU During playback, press this button
button
to start the popup menu function.
Controlling Music Playback
You can control the playback of music
located on a Blu-ray disc, DVD, CD,
USB device, or your computer.
Buttons on the Remote Control
used for Music Playback
Repeat an Audio CD (CD-DA)/
MP3
1. During Playlist playback, press the
TOOLS button.
TRACK 001
00:08 / 05:57
4
1
2
AUDIO
4
5
6
SUBTITLE
5
6
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
The selected track is played.
Skip : During playback, press the 1 or 2
button to move to the previous or next file of
the playlist.
BONUS
3
HOME
REPEAT
REPEAT
FULL
5 button : Stops a track.
VIEW
A-B
SCREEN
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
Pause : Pauses a track.
6 button : Plays the currently selected
track.
Music
1/6
" Pause c Select
CD
3. Press the v button.
Off
(
) Track
(
) All
(
) Shuffle
Songs are played in the order in
which they were recorded.
The current song is repeated.
All songs are repeated.
Shuffle plays songs in random
order.
TRACK 004
02:38
02:38
TRACK 006
TRACK 005
02:38
02:38
TRACK 008
TRACK 007
02:38
02:38
TRACK 010
TRACK 009
03:35
2. Press the ◄► buttons to select
Track, All, Shuffle, or Off.
02:38
TRACK 003
03:17
Tools ' Return
TRACK 002
02:38
04:27
03:41
TRACK 005
1/2 Page
TRACK 001
TRACK 001
\05:57
04:07
TRACK 004
TRACK 006
1
2
1. To move to the Music List, press
the 5 or RETURN button.
The Music List screen appears.
> Move < Adjust ' Return
TRACK 003
+
3
Playlist
Tools
TRACK 001
Repeat Mode
? Off
Rip TRACK 002
Playlist
02:38
02:38
CD
a Change Device
c Select
Tools ( ) Jump to Page ' Return
2. Press the ▲▼◄► buttons to move
to a desired track, and then press
the YELLOW (C) button. A check
appears on the track.
Repeat this procedure to select
additional tracks.
3. To remove a track from the list,
move to the track, and then press
the YELLOW (C) button again.
The check on the track is
cancelled.
4. When done, press the v button.
The tracks you selected are
displayed on the right side of the
screen. The player plays the first
track.
5. To change the play list, press the
5 button or RETURN button to
return to the Music List. Repeat
Steps 2, 3, and 4.
6. To cancel the play list and return
to the Home screen, press the
RETURN or EXIT button.
✎✎ NOTES
ƒƒ You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
ƒƒ If you remove all the tracks from a play list
and then press the v button, the player
lists and plays all the tracks on the disc.
Ripping
Lets you copy audio files contents
from an Audio CD (CD-DA) to USB/
HDD device.
1. Open the disc tray. Place the audio
(CD-DA) disc on the tray, and
close the tray. Insert a USB device
into the USB jack on the front of
the product.
2. In Stop mode, press the ▲▼◄►
buttons to move to a desired track,
and then press the YELLOW (C)
button. A check appears on the
track.
Repeat this procedure to select
additional tracks.
3. To remove a track from the list,
move to the track, and then press
the YELLOW (C) button again.
The check on the track is
cancelled.
4. When done, press the TOOLS
button and then select the Rip
using the ▲▼ buttons. and then
press the v button. The Rip
pop-up appears.
21
5. Use the ▲▼ buttons to select the
device to store the ripped files,
and then press the v button.
✎✎ NOTES
ƒƒ Do not disconnect the device while ripping is
in progress.
6. If you want to cancel ripping, press
the v button and then select
Yes. Select No to continue ripping.
7. When ripping is complete, the
"Ripping completed." message
appears. Press the v button to
go back to the Playback screen.
✎✎ NOTES
ƒƒ This function may not be supported by some
discs.
ƒƒ On the Ripping screen, you can also choose
Select All and Deselect All.
-- Use Select All to select all tracks. This
cancels your individual track selections.
-- Use Deselect All to deselect all
selected tracks at once.
Disc Copy to USB
Lets you copy video/photo/music
contents from data Disc to USB/HDD
device.
1. Open the disc tray. Place the data
disc on the tray, and close the tray.
Insert a USB device into the USB
jack on the front of the product.
The new device pop-up appears.
2. Press the ▲ button, and then
press the ◄► buttons to select
Blu-ray, DVD or CD.
3. Use the ▲▼ buttons to select
Photos, Videos or Music, and
then press the v button. The
Photos, Videos & Music screen
appears listing the content of the
device. Depending on how the
contents is arranged, you will see
either folders, individual files, or
both.
✎✎ NOTES
ƒƒ Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change
this selection by returning to the Photos,
Videos & Music screen and repeating Step 3.
4. In Stop mode, use the ▲▼◄►
buttons to select the VIDEOS,
PHOTOS, or MUSIC, and then
press the YELLOW (C) button. A
check appears to the left of the
desired item.
5. Repeat Step 4 to select and check
additional desired item.
6. To remove the desired item from
the list, press the YELLOW (C)
again.
The check on the desired item is
removed.
7. When done, press the TOOLS
button and then select the Copy
to USB using the ▲▼ buttons.
and then press the v button.
The Copy to USB pop-up appears.
8. Use the ▲▼ buttons to select the
device to store the copied files,
and then press the v button.
✎✎ NOTES
ƒƒ Do not disconnect the device while copying is
in progress.
9. If you want to cancel copying,
press the v button and then
select Yes. Select No to continue
copying.
10.When copying is complete, the
"Copying completed." message
appears. Press the v button to
go back to the Playback screen.
✎✎ NOTES
ƒƒ This function may not be supported by some
discs.
ƒƒ On the Copying screen, you can also choose
Select All and Deselect All.
-- Use Select All to select all item. This
cancels your individual item selections.
-- Use Deselect all to deselect all selected
item at once.
Playing Photo Contents
You can control the playback of
photo content located on a Blu-ray
disc, DVD, CD, USB device, or your
computer.
Using the Tools Menu
During playback, press the TOOLS
button.
Start Slide
Show/ Stop
Slide Show
Slide Show
Speed
Background
Music
Zoom
Rotate
Information
✎✎ NOTES
Select to start or stop the slide
show.
Select to set a slide show's
speed.
Select to listen to music while
viewing a slide show.
Select to enlarge the current
picture. (Enlarge up to 4 times)
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
Shows the picture information.
ƒƒ Depending on the disc or storage device, the
Tools menu may differ.
ƒƒ To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
ƒƒ You can't enlarge the subtitle and PG graphic
in the full screen mode.
22
Appendix
PROBLEM
Troubleshooting
Forgot password
Before requesting service, please try the following solutions.
PROBLEM
No operation can be
performed with the
remote control.
Disc does not play.
Disc Menu does not appear.
The prohibition message
appears on the screen.
Play mode differs from
the Setup Menu selection.
The screen ratio cannot
be changed.
No audio.
The screen is blank.
SOLUTION
~~ Check the batteries in the remote control. They may need replacing.
~~ Operate the remote control at a distance of no more than 6.1m from the player.
~~ Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
~~ Ensure that the disc is installed with the label side facing up.
~~ Check the region number of the Blu-ray Disc/DVD.
~~ Ensure that the disc has disc menus.
~~ This message appears when an invalid button is pressed.
~~ The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
~~ You’ve requested a title or chapter number or search time that is out of
range.
~~ Some of the functions selected in the Setup Menu may not work properly if the disc is not
encoded with the corresponding function.
~~ The Screen Ratio is fixed on your Blu-ray Disc/DVD.
~~ This is not a problem with the player.
The picture is noisy or
distorted
No HDMI output.
Abnormal HDMI output
screen.
If you experience other
problems.
DLNA function
~~ Make sure that the disc is not dirty or scratched.
~~ Clean the disc.
~~ Check the connection between the TV and the HDMI jack of the player.
~~ Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI input
resolutions.
~~ If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
~~ Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
~~ If the problem still cannot be solved, please contact your nearest Samsung
authorised service centre.
I can see folders shared
through DLNA, but I
cannot see the files.
~~ DLNA shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not
displayed.
DLNA connection
between Player and PC is
unstable.
~~ The IP address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
~~ Check if you have a firewall enabled.
If so, disable the firewall function.
Video is played
intermittently.
~~ Make sure you have selected the correct Digital Output in the Audio Options
Menu.
~~ If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
~~ Press the ^ button (on the front panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
~~ When the factory default settings are restored, all stored user BD data is deleted.
SOLUTION
~~ Press the ^ button (on the front panel) for more than 5 seconds with no
disc inside. All settings including the password will revert to the factory
settings.
Don’t use this unless absolutely necessary.
~~ When the factory default settings are restored, all stored user BD data is deleted.
~~ Check if the network is stable.
~~ Check if the network cable is properly connected and if the network is
overloaded.
~~ The wireless connection between the DLNA compatible device and the
player is unstable.
Check the connection.
23
PROBLEM
SOLUTION
I cannot connect to the
BD-LIVE server.
~~ Check whether the network connection is working or not by using the
Network Status menu.
~~ Check whether the USB memory device is connected to the player.
~~ The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
~~ Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
~~ If all above fails, contact the contents provider or update the player to the
latest firmware.
BD-LIVE
When using the BD-LIVE
service, an error occurs.
✎✎ NOTES
~~ The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
ƒƒ When the factory default settings are restored, all stored user BD data is deleted.
Repairs
If you contact us to repair your player, an administration fee may be charged if
either:
1. An engineer is called out to your home at your request and there is no
defect in the product.
2. You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a
home visit or begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line
at www.samsung.com, or contact Samsung Customer Care before seeking to
repair your player.
24
Specifications
General
USB
HDMI
Audio Output
Network
Weight
1.0 Kg
Dimensions
290 (W) X 221 (D) X 39 (H) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Type A
USB 2.0
DC output
5V 0.5A Max.
Video
2D : 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
Audio
PCM, Bitstream
Digital Audio Output
Coaxial
Ethernet
100BASE - TX Terminal
Wireless LAN
Built-In
Security
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC)
Supported
-- Network speeds equal to or below 10Mbps are not supported.
-- Design and specifications are subject to change without prior notice.
-- For the power supply and power consumption, refer to the label attached to
the player.
-- Weight and dimensions are approximate.
Compliance and Compatibility Notice
NOT ALL discs are compatible
~~ Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that
can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CDDA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
~~ Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
~~ Samsung cannot assure that this player will play every disc bearing the BD-ROM, BDRE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of
Blu-ray Discs because some features may be optional, additional features may have
been added to the Blu-ray Disc format after the production of this player, and certain
available features may be subject to delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-- some discs are produced in a manner that allows specific or limited operation or
restricts features during playback;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording
conditions;
-- problems and errors can occur during the creation of Blu-ray Disc or DVD software
and/or the manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care centre.
~~ If you encounter disc compatibility or player operation problems, please contact
SAMSUNG customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
~~ For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
~~ For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
~~ Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for
the DVD format, certain restrictions are imposed on playback, analogue signal output,
etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To
obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please
contact SAMSUNG customer care centre.
~~ Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in
a distorted picture from copy-protected Blu-ray Disc/DVDs.
~~ Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
~~ Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibited use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com.
To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego CA, 92138,
USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is
prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may
not use any content or services in a manner that has not been authorised by the content
owner or service provider. Without limiting the foregoing, unless expressly authorised by the
applicable content owner or service provider, you may not modify, copy, republish, upload,
post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or
medium any content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY,
VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE
MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES,
INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT
OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF,
OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE
USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption
or suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be
made directly to the respective content and service providers.
Licence
~~ Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
~~ For DTS patents, see http://patents.dts.com. Manufactured under
licence from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and DTS 2.0+Digital Out is
a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
~~ DivX
2.0+Digital Out
-- ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX
Certified® device that has passed rigorous testing to verify that it
plays DivX video. Visit divx.com for more information and software
tools to convert your files into DivX videos.
-- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668;
7,515,710; 7,519,274.
~~ The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
~~ Oracle and Java are registered trademarks of Oracle and/or its
affiliates. Other names may be trademarks of their respective
owners.
~~ Open Source Licence Notice
-- In the case of using open source software, Open Source Licences are available on the
product menu.
~~ Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
~~ DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks,
or certification marks of the Digital Living Network Alliance.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
EGYPT
ALGERIA
PAKISTAN
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 - Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and
Mobile]
02-4222111 [Other landline]
1800-SAMSUNG(726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678) Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp/support
www.samsung.com/my/support
www.samsung.com/ph/support
www.samsung.com/sg/support
www.samsung.com/th/support
www.samsung.com/tw/support
www.samsung.com/vn/support
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/eg/support
www.samsung.com/n_africa/support
www.samsung.com/pk/support
Area
TUNISIA
JORDAN
SYRIA
IRAN
MOROCCO
SAUDI ARABIA
TURKEY
` Africa
NIGERIA
Ghana
Cote D’ Ivoire
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
Contact Centre 
80-1000-12 0800-22273
06 5777444
18252273
021-8255
080 100 2255
920021230
444 77 11
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095-0077
0800 545 545
0800 300 300
0800 755 755
9999
200
499999
1969
0860 SAMSUNG (726 7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/n_africa/support
www.samsung.com/Levant/support (English)
www.samsung.com/Levant/support (English)
www.samsung.com/iran/support
www.samsung.com/n_africa/support
www.samsung.com/sa/support
www.samsung.com/sa_en/support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr/support
www.samsung.com/support
www.samsung.com/support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising