Corded telephone LJ-120

Corded telephone LJ-120
User guide
Please read these instructions
carefully before use and keep
this User Guide for future
reference!
LJ-120
Contents
LJ-120
Contents
I. Introduction.........................................................................................
Telephone features...............................................................................
Function button index............................................................................
II. Getting started...................................................................................
How to connect the batteries................................................................
How to mount the stand……………………………………………………
How to connect the handset and telephone line...................................
How to set the dial mode for your type of telephone exchange............
Wall mounting……………………………………………………………….
III. Using the telephone.........................................................................
How to set the menu language……………………………………………
How to set the display contrast.............................................................
How to set date and time......................................................................
Ringer volume control...........................................................................
How to select ringer melody..................................................................
2-way speaker function.........................................................................
How to make a call...............................................................................
How to receive a call.............................................................................
OUT memory........................................................................................
How to delete the OUT number............................................................
Redial function......................................................................................
Auto-redial function…………………………………………………………
How to enter a pause............................................................................
How to set a pause…………………………………………………………
Hold function.........................................................................................
Memory.......................................................................………………….
Flash function........................................................................................
How to lock telephone numbers............................................................
Alarm function.......................................................................................
Anti-parallel function........................................................................…..
Calculator..............................................................................................
IV. Clip (Caller ID) – Calling line identification presentation.............
How to review Clip numbers.................................................................
How to delete Clip numbers..................................................................
VIP function..........................................................................................
How to make a call from the Clip memory............................................
How to set the prefix………………………………………………………..
How to set the local area code..............................................................
1
3
3
5
7
7
7
8
8
8
10
10
10
11
12
12
13
13
14
14
15
15
16
16
17
17
18
20
21
22
23
23
24
25
25
25
26
26
27
Contents
LJ-120
V. Phone-book……………………………………………………………….
How to enter the name and number……………………………………...
How to search and review the name and number………………………
How to edit the phone-book……………………………………………….
How to delete a name and number……………………………………….
How to make a call from the phone-book………………………………..
VI. Connecting the headphone……………………………………………
VII. Help...................................................................................................
Important advice..................................................................................
2
29
29
30
31
31
32
33
34
35
I. Introduction
LJ-120
I. Introduction
Important!
Please read these instructions carefully before use and
keep this User Guide for future reference.
Telephone components supplied:
telephone set (base unit + handset),
handset cord,
line cord,
stand,
user guide,
guarantee card.
Telephone features
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Phone-book
maximum of 93 memory locations
entering a name
searching a name (number)
deleting a number
10 languages
16-digits, blue backlit LCD display
10 two-touch number memory
8 one-touch number memory
Support of memory
Calculator
CLIP(Caller ID) – calling line identification
presentation in European system
telephone number review
date and time display
local area code enter
prefix
call back
VIP function
Alarm-clock
Call timer
Adjustable display contrast
Date and time setting
3
I. Introduction
LJ-120
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Last number redial
Auto redial
Out number memory
Pause
2-way speaker function
2-way speaker volume rotary switch
Pre-dial function
Flash
16 types of ringer sound selectable
(12 melody ringers)
Ringer volume control
Anti-parallel function
Music on hold
Tone/pulse dialing
Lock for long distance calls
Headphone socket
Wall mounting
4
I. Introduction
LJ-120
Function button index
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
Handset loudspeaker
Hook switch
Hold clip
9V socket for power adaptor
LINE OUT line socket
LINE IN line socket
Display
RINGER LOW/HI switch
MODE P/T switch
CAL button
UP/+ button
DOWN/- button
OUT/X button
STORE/÷
÷ button
Speaker volume rotary switch
M1-M8 button
Keypad
*/. button
#/= button
SP-PHONE button
Handset hole
Handset clip
Memory label
Base loudspeaker
RECALL/VIP button
DEL/TIME button
BOOK button
Headphone socket
SET/HOLD button
Handset microphone
Handset sockets
Lock-socket
BACK/ARD button
FLASH button
RD/P button
Base microphone
IN USE indicator
5
I. Introduction
LJ-120
Note!
The line sockets LINE OUT, LINE IN, the RINGER LOW/HI switch,
the MODE P/T switch, the 9V socket, the handset socket and the
headphone socket are located on the side of the base unit. In
addition, on the bottom of the base unit, is the socket for
blocking telephone numbers.
1
2
3
4
5
6
7
8
10
9
11
12
13
14
15
21
22
CAL
UP/+
DOWN/-
OUT/X
STORE /
23
24
25
16
26
27
RECALL/VIP
28
DEL/TIME
1
4
7
3
6
9
ABC
GHI
PQRS
BOOK
2
5
8
0
20
SET/HOLD
JKL
TUV
30
DEF
17
MNO
WXYZ
18
19
#
IN USE
20
BACK/ARD
31
32
33
6
34
FLASH
35
RD/P
36
SP-PHONE
37
II. Getting started
LJ-120
II. Getting started
How to connect the batteries
♦
♦
♦
Remove the cover of the battery
compartment on the underside of the base
unit.
Fit three 1,5V AA batteries,
Replace the battery compartment cover.
Note!
Instead of batteries, the adaptor to the 9V socket, which is
placed on the side of the base unit can be connected. The
parameters of the adaptor must be as follows:
inside voltage –
UIN = 230V, f =50 Hz
outside voltage–
Uout = 9V DC
current
Ioutmin =
100 mA
standard plug (Φ=2.1 mm)
with „-” inside.
Adaptor is not in complete!
How to mount the table stand
See below picture.
7
II. Getting started
LJ-120
How to connect the handset and telephone line
Plug one end of the coiled handset cord into the handset and the
other end into the socket on the side of the telephone.
Insert the base unit’s telephone line plugs into the PTT wall socket and
telephone socket LINE IN as shown on the illustration.
Note!
The telephone is equipped with two line sockets. These sockets
are connected in parallel. It does not matter, where the
telephone line and second telephone are connected.
After connecting the telephone, the display shows the date, the clock and the
counter of the CLIP numbers. These symbols will be always displayed in the
standby mode.
How to set the dial mode for your type of telephone exchange
These are two different modes a telephone can use to communicate with the
local exchange. Modern telephone exchanges accept TONE dialing, but some
older exchanges accept only PULSE dialing. This telephone is capable of
either type of dialing- but if your local telephone exchange is a modern one
that accepts TONE dialing, this is the best type to use, because:
it gives you much faster connections,
it allows you to use special functions if they are available in your area.
To set the right dial mode:
move the MODE P/T switch to T or P position.
Note!
Special functions are available only if the relevant TP S.A.
services have been subscribed to.
If more information is required, please contact the BOK office
or your network provider.
Wall mounting
The wall mount brackets are located underneath the telephone base unit. The
telephone can be conveniently wall mounted near the PTT line socket.
To mount the base onto the wall:
drill two holes into the wall in the correct position, a distance of 89 mm
apart. Put the screws into the wall, leaving about 5 mm free to hang
the wall mounting bracket,
mount the stand (please see the below figure)
set the wall clip in the right position,
replace the handset on the base unit,
hang the telephone onto the screws.
8
II. Getting started
LJ-120
YOUR TELEPHONE IS NOW READY FOR USE!!!
9
III. Using the telephone
LJ-120
III. Using the telephone
How to set the menu language
The factory setting is ENGLISH.
You may select:
ENGLISH- English, FRANCAIS- French, ESPANOL- Spanish, PORLUGUESPortuguese, POLISH- Polish, ITALIANO- Italian, SVENSKA- Slovenian,
DEUTSCH- German, NEDERLANDS- Dutch, TURKCE- Turkish.
To select the appropriate language:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦
Press the SET/HOLD button again, the
SET/HOLD
display will show ENGLISH.
♦
Press the UP/+ or DOWN/- button to
UP/+
DOWN/select a language.
♦ Press the SET/HOLD button.
♦ Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
DEL/TIME
telephone will return to standby mode
after several seconds. The setting will be
stored.
How to set the display contrast
The factory setting is 3.
SET/HOLD
UP/+
DOWN/-
DEL/TIME
To set the display contrast::
♦ Press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ button, the display will
show LCD CONTRAST.
♦ Press the SET/HOLD button.
♦ Press the UP/+ or DOWN/- button to set
the right contrast.
♦ Press the SET/HOLD button.
♦ Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
stored.
10
III. Using the telephone
LJ-120
How to set date and time
SET/HOLD
UP/+
DOWN/-
DEL/TIME
To set date and time:
♦ press the SET/HOLD button. The display
will show LANGUAGE.
♦ Press the UP/+ button twice, the display
will show DATE TIME.
♦ Press the SET/HOLD button. The display
will show the symbol Y 2003 indicating
the year. The two last digits will be
flashing.
♦ Press the UP/+ or DOWN/- button to set
the right year.
♦ Press the SET/HOLD button. The digit
indicating the month will start to flash.
♦ Press the UP/+ or DOWN/- button to set
the right month.
♦ Press the SET/HOLD button. The digit
indicating the day will start to flash.
♦ Press the UP/+ or DOWN/- button to set
the right day.
♦ Press the SET/HOLD button. The digits
indicating the hours will start to flash.
♦ Press the UP/+ or DOWN/- button to set
the right hour.
♦ Press the SET/HOLD button. The digits
indicating the minutes will start to flash.
♦ Press the UP/+ or DOWN/- button to set
the right minutes.
♦ Press the SET/HOLD button.
♦ Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
stored.
Note!
♦ During the setting, the display will show the following
symbols:
MON- Monday,
TUE- Tuesday,
11
III. Using the telephone
WEDTHUFRISATSUNPM –
AM –
LJ-120
Wednesday,
Thursday,
Friday,
Saturday,
Sunday,
afternoon time,
before noon time.
Ringer volume control
The volume at which the base unit will ring for an incoming call can be
adjusted.
To select the volume you prefer:
move the RINGER LOW/HI switch to:
LOW position– low ringing volume
or
HI position– high ringing volume.
How to select the ringer melody
One ringer melody can be selected from among 16 ringer melodies. The
settings 01-04 indicate the normal ringers and settings 05-16 indicate the
melody ringers.
To select one ringer melody:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ or DOWN/- button until the
display will show RING MELODY.
♦ Press the SET/HOLD button. The display
SET/HOLD
will show an actual setting and the ringer
melody will be played.
♦ Press the UP/+ or DOWN/- button to
select the right signal. The setting 00
UP/+
DOWN/indicates, the ringer is off.
♦ Press the SET/HOLD button.
♦ Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
DEL/TIME
stored.
12
III. Using the telephone
LJ-120
Note!
The melody ringers are available only, when the batteries are
placed in the battery compartment. If there are no batteries,
only the normal ringer will sound.
2-way speaker function
The 2-way speakerphone function allows a number to be dialed, or a call to be
made, without the handset needing to be lifted. The party on the other end of
the line will automatically be able to hear and to be heard through the speaker
located in the base unit of the telephone. When using this function, the user
needs to speak within a reasonable distance of the telephone microphone in
order that the microphone may pick-up voice sound. This function may also be
used to make a conference call between several parties in the same office.
Using the SP-PHONE button, the 2-way speakerphone function can be
switched on/off.
After pressing the SP-PHONE button, the
display will show the timer.
L U M E
V O
W
LO
HIG
H
SP-PHONE
In addition, the VOLUME LOW/HIGH rotary
switch can be used to adjust the volume of the
loudspeaker.
How to make a call
SP-PHONE
1
4
7
2
5
8
0
ABC
GHI
PQRS
JKL
TUV
3
6
9
To make a call:
♦ lift the handset from the base unit
or
♦ press the SP-PHONE button.
The display will show the timer.
♦
DEF
MNO
WXYZ
#
♦
SP-PHONE
When the PTT on-line signal is heard, the
required number should be dialed. The
number will be displayed. After several
seconds, the call time counter will be
switched on.
To end your conversation, replace the
handset on the base unit or press the
SP-PHONE button. The time of your last
call can be displayed by pressing the
OUT/X button (see the chapter: ”OUT
memory”).
13
III. Using the telephone
LJ-120
Note!
The telephone number in the standby mode can also be entered
(before lifting the handset or pressing the SP-PHONE button).If
you wish to delete the last incorrect digit, press the DEL/TIME
button. If you wish to make a call, press the BACK/ARD button.
The 2-way speaker function will be switched on and the number
will be dialed automatically.
How to receive a call
When the telephone rings (the display and
IN USE indicator flash):
♦ lift the handset from the base unit or press
the SP-PHONE button.
In addition, on the side of the handset there is
the VOLUME LOW/HIGH rotary switch to
adjust the volume of the base’s loudspeaker.
SP-PHONE
♦
After completing your conversation,
replace the handset on the base unit or
press the SP-PHONE button.
OUT memory
Your telephone can store the most recently dialed numbers in the OUT
memory. They can be reviewed by pressing the OUT/X button in standby
mode. Each number may consist of up to 16 digits.
Note!
The volume of the OUT memory locations depends on the volume of
the digits in the telephone number. If the stored numbers have
16 digits, the OUT memory has 20 memory locations. If the volume
of the digits decreases, the volume of the memory locations
increases. For example, for 10-digit numbers, the volume of the
memory location is 26, for 8-digit numbers the volume of the
memory location is 34.
To review OUT numbers:
♦ press the OUT/X button. The display
shows the last number dialed, the time of
OUT/X
this call and the number of the memory
location.
♦ By pressing the OUT/X button, the
remaining numbers can be reviewed.
If the OUT/X button is not pressed, the telephone will return to standby mode
after several seconds. If the memory is empty, the display will show the
symbol - - - End - - -.
14
III. Using the telephone
LJ-120
To make a call:
♦ press the OUT/X button to select the
number.
OUT/X
BACK/ARD
♦
Press the BACK/ARD button. The 2-way
speaker function will be switched on and
the number will be dialed automatically.
♦
After the call, replace the handset on the
base unit or press the SP-PHONE button.
SP-PHONE
How to delete the OUT number
To delete an individual number:
♦ press the OUT/X button to select the
number, to be deleted.
♦ Press the DEL/TIME button twice. The
number will be removed.
OUT/X
To delete the all numbers:
♦ Press the OUT/X button.
♦ Press and hold the DEL/TIME button until
- - - End - - - is displayed. After several
seconds, the telephone will return to
standby mode. All numbers will be
removed.
DEL/TIME
Last number redial
Your telephone automatically stores the last number dialed. This function
can be used, when the number is busy.
SP-PHONE
To redial:
♦ lift the handset or press the SP-PHONE
button.
♦
RD/P
Press the RD/P button. The last number
will be displayed and dialed.
15
III. Using the telephone
LJ-120
Auto-redial function
The Auto-redial function allows the last number to be redialed during the
using the 2-way speaker button. This operation can be repeated 16 times,
until a connection is made.
To dial the number again:
♦ press the BACK/ARD button. The 2-way
speaker function will be switched off
briefly. After an interval, the 2-way
speaker function will be switched on and
the number will be dialed again
automatically.
♦ Press the SP-PHONE button to return to
the standby mode.
BACK/ARD
SP-PHONE
How to enter a pause
With some switchboards, after dialing the access code you may have to
wait for a moment while the switchboard picks up an outside line. To
compensate for this, you can enter a pause within a phone number.
SP-PHONE
2
ABC
GHI
5
JKL
PQRS
8
TUV
/
0
OPER
1
4
7
RD/P
3
6
9
DEF
MNO
WXYZ
To enter a pause:
♦ lift the handset or press the SP-PHONE
button.
♦ Enter the access code for an outside line,
for example 0.
♦ Press the RD/P button to enter a pause.
The symbol P will be showed on the
display.
/=
♦
Enter the remaining digits of the telephone
number.
♦
After your call, replace the handset on the
base unit or press the SP-PHONE button.
SP-PHONE
Note!
The number and pause can be also entered in the standby mode. To
make a call, press the BACK/ARD button.
16
III. Using the telephone
LJ-120
How to set a pause
SET/HOLD
UP/+
DOWN/-
DEL/TIME
To set a pause:
To select one ringer melody:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ or DOWN/- button until the
display will show PAUSE.
♦ Press the SET/HOLD button. The display
will show an actual setting.
♦ Press the UP/+ or DOWN/- button to
select the right time of the pause. It can be
selected 1-0, 2-0, 3-0 and 4-0.
♦ Press the SET/HOLD button.
♦ Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
stored.
Hold function
The Hold function allows music to be switched on during the conversation.
After pressing the HOLD button, the person on the other end of the line
will automatically be able to hear music. This function may be used, for
example, in offices while a client is on hold.
SET/HOLD
To switch the hold music on:
♦ inform the person on the other end of the
line about a music pause.
♦ Press the SET/HOLD button. The display
will show HOLD. The telephone will start
to play music.
Note!
In activating this function using the UP/+ or DOWN/- button,
you may select the melody you wish the caller to hear. There are
12 melodies available, from which you can choose. These are
indicated by symbols from 01 to 12.
♦
You can replace the handset on the base.
The connection will not be interrupted.
The hold music will be heard through the
speaker located in the base unit of the
telephone.
17
III. Using the telephone
LJ-120
♦
SP-PHONE
Lift the handset or press the SP-PHONE
button to continue speaking. The Hold
function will be switched off.
Note!
If the handset is not replaced on the base, press the SET/HOLD
button again to switch the hold music off.
Memory
Your telephone can store 8 telephone numbers in the one-touch memory and
10 telephone numbers in the two-touch memory. The number can then be
dialed by pressing one button or two buttons. The one-touch memory locations
are located under the buttons indicating M1-M8 and the two-touch memory
locations are located under the buttons of the keypad. Each number that is
stored can have up to 16 digits.
One-touch memory
To store a number in the memory:
♦ press the STORE/÷
÷ button. The display
1
2
3
STORE /
will show INPUT NUMBER.
DEF
ABC
4
7
GHI
PQRS
5
8
0
JKL
TUV
6
9
MNO
WXYZ
#
♦
Enter the number, to be stored in the
memory. The number will be displayed.
Note!
The pause can be stored in the memory by pressing RD/P button.
♦
SP-PHONE
Now press one of the number buttons
(M1-M8). This gives you the code under
which your number will be stored. The
telephone will return to standby mode.
To dial a number using the memory :
♦ lift the handset or press the SP-PHONE
button.
♦
Next press the appropriate code number
key. The number will be displayed and
dialed.
18
III. Using the telephone
LJ-120
Note!
If there is no number under the code number key, the telephone
displays symbol - - - - .
♦
Replace the handset or press the
SP-PHONE button to end the call.
SP-PHONE
Note!
1. Storing a number in the memory automatically deletes any
previous number kept under the individual code number you
choose.
2. The stored numbers can be reviewed in the standby mode. To
display the number from the code number key:
press the code number key. The number will be displayed.
Two-touch memory
1
4
7
STORE /
2
5
8
0
ABC
GHI
PQRS
JKL
TUV
3
6
9
DEF
To store a number in the memory:
♦ press the STORE/÷
÷ button. The display
will show INPUT NUMBER.
MNO
WXYZ
#
♦
Enter the number, to be stored in the
memory. The number will be displayed.
Note!
The pause can be stored in the memory by pressing RD/P button.
STORE /
1
4
7
2
5
8
0
ABC
GHI
PQRS
JKL
TUV
3
6
9
♦
Press the STORE/÷
÷ button a second time.
The display will show INPUT ADDR.
♦
Now press one of the number buttons
(0-9). This gives you the code under which
your number will be stored. The telephone
will return to standby mode.
DEF
MNO
WXYZ
#
SP-PHONE
RECALL/VIP
To dial a number using the memory :
♦ lift the handset or press the SP-PHONE
button.
♦
Press the RECALL/VIP button.
19
III. Using the telephone
1
4
7
2
5
8
0
ABC
GHI
PQRS
JKL
TUV
3
6
9
LJ-120
♦
DEF
MNO
WXYZ
Next press the appropriate code number
key (0-9). The number will be displayed
and dialed.
#
Note!
If there is no number under the code number key, the telephone
displays symbol - - - -.
♦
Replace the handset or press the
SP-PHONE button to end the call.
SP-PHONE
Note!
1. Storing a number in the memory automatically deletes any
previous number kept under the individual code number you
choose.
2. The stored numbers can be reviewed in the standby mode. To
display the number from the code number key:
press the RECALL/VIP button,
press the code number key. The number will be displayed.
How to delete a number from one-touch and two-touch memory
DEL/TIME
During the review:
♦ Press the DEL/TIME button twice. The
number will be removed. The telephone
will return to standby mode.
Flash function
This allows various switchboard facilities such as call transfer and conference
calls to be used. Contact your communications manager or the person
responsible for maintaining your switchboard to find out what facilities are
available. The telephone allows the following values to be set: 100ms, 270ms,
300ms, 600ms and 1000ms. The factory setting is 100ms.
SET/HOLD
UP/+
DOWN/-
To set the right Flash value:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ or DOWN/- button until the
display will show FLASH.
♦ Press the SET/HOLD button. The display
will show an actual setting.
20
III. Using the telephone
LJ-120
♦
SET/HOLD
UP/+
DOWN/-
♦
♦
DEL/TIME
Press the UP/+ or DOWN/- button to
select the right flash.
Press the SET/HOLD button.
Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
stored.
How to transfer a call.
To transfer a call from one internal number
to another:
♦ press the FLASH button.
FLASH
1
4
7
2
5
8
0
ABC
GHI
PQRS
JKL
TUV
3
6
9
DEF
MNO
♦
Enter the number, to which you want to
transfer the call.
♦
Replace the handset on the base unit.
WXYZ
#
How to lock the telephone numbers.
The telephone can be blocked so that it is impossible to make a call beginning
with the digit „0”,
for example:
a Long Distance or International call, a Party Line call, or, in the case of an
office switchboard, where the number „0” facilitates an outside line , it can
block an extension number from being used by an unauthorized person. This
is an invaluable feature in the prevention of unauthorized calls and the
safeguarding of a telephone bill from unauthorized expense.
In order to use this feature the key must be placed in the lock located on the
underside of the telephone, and then turned to the required position:
“red dot” position - the telephone can be used to dial all numbers on
the keypad including „0”.
“green dot” position – the telephone can used to block all numbers.
“yellow dot” position - the telephone has the lock activated and the
number „0” cannot be dialed.
21
III. Using the telephone
LJ-120
Alarm function
Your telephone may be used as alarm clock. Up to three different times
may be stored simultaneously, using the alarm function. The telephone will
emit the alarm signal for 30 seconds.
To program the alarm:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ or DOWN/- button until the
SET/HOLD
display will show ALARM.
♦ Press the SET/HOLD button. The display
will show 12 – 00P OFF ALARM 1. The
UP/+
DOWN/digits 12 indicating the hours will start to
flash.
♦ Press the UP/+ or DOWN/- button to
select the right hours.
♦ Press the SET/HOLD button. The digits
indicating the minutes will start to flash.
♦ Press the UP/+ or DOWN/- button to
select the right minutes.
♦ Press the SET/HOLD button. The symbol
OFF will start to flash.
♦ Press the UP/+ or DOWN/- button to set
ON.
♦ Press the SET/HOLD button. The display
will show 12 – 00P OFF ALARM 2. Now,
DEL/TIME
the second alarm can be set.
♦ If you don’t want to set the second alarm,
press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the telephone will return to standby
mode after several seconds. The setting will be stored.
Note!
You do not have to set three alarms . By pressing the SET/HOLD
button, you can select the alarm, you wish to set.
The alarm signal will be played every day. The alarm can be switched off by
pressing the DEL/TIME button.
Note!
The alarm will
located in the
connected to a
To switch the
only function when the batteries are
battery compartment or the base unit is
power supply.
alarm off, set the OFF symbol.
22
III. Using the telephone
LJ-120
Anti-parallel function
This function allows your telephone line to be saved before unauthorized
using. After connecting another telephone, your telephone will start to emit the
disturbed signal.
To switch the anti-parallel function on:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ or DOWN/- button until the
display will show PARALLEL.
SET/HOLD
♦ Press the SET/HOLD button. The display
will show ALLOW.
♦ Press the UP/+ or DOWN/- button to set
UP/+
DOWN/FORBID.
♦ Press the SET/HOLD button.
♦ Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the
telephone will return to standby mode
after several seconds. The setting will be
DEL/TIME
stored.
Calculator
Your telephone may be used as calculator. To switch the calculator on/off
press the CAL button. After pressing this button, the display will show the digit
0.
Below is a description of all button functions:
♦ the OUT/x button– multiplication,
♦ the STORE/÷
÷ button- division,
♦ the UP/+ button- addition,
♦ the DOWN/- button- subtraction,
♦ the DEL/TIME button– clearing of entered digits,
♦ the FLASH button – clearing of result,
♦ the */. button– adding a decimal point,
♦ the #/= button- result/total.
Note!
To enter negative sign, press the SET/HOLD button, enter the
digit and press the SET/HOLD button again.
23
IV. Clip (Caller ID)- Calling line identification presentation
LJ-120
IV. Clip (Caller ID)- calling line identification
presentation
Note!
CLIP function is
relevant TP S.A.
more information
Service Office)
only available if you have subscribed to the
services or those of another Provider. If
is required, please contact the BOK (Customer
office in your area..
Your telephone displays and stores the number of the caller. The number is
displayed until the UP/+ or DOWN/- button is pressed or the handset lifted.
The number can be identified using the FSK/DTMF system
In Poland, the FSK system is obligatory.
The FSK system is the best to use, because:
it allows the sending of statements, which define the status of the
number,
it allows the automatic setting of time and date.
Note!
The volume of the CLIP memory locations depends on the volume of
the digits in the telephone number. If the stored numbers have
16 digits, the OUT memory has 110 memory locations. If the
volume of the digits decreases, the volume of the memory
locations increases. For example, for 10-digit numbers, the
volume of the memory location is 130, for 8-digit numbers the
volume of the memory location is 160.
Together with the number, date, time and statements (symbols) are also
stored. The display can show the following symbols:
NEW- a new number is stored in the memory,
REP- the number is repeated,
- - P - - - the number is private and cannot be displayed,
- - O - - - the number is unknown and cannot be shown,
Error (- - - E- - - )- an error has occurred in sending the number.
The number is identified and stored in the following form:
for example- 0 42 1234567,
The identified number consists of:
0- prefix,
42- local area code,
1234567- number of subscriber.
Note!
If the clip memory is full, storing
deletes the first stored number.
24
a new number automatically
IV. Clip (Caller ID)- Calling line identification presentation
LJ-120
How to review Clip numbers
If new numbers are stored, the NEW indicator flashes. The number is
displayed until the UP/+ or DOWN/- button is pressed or the handset lifted.
After displaying new numbers, the NEW symbol disappears from the display.
New numbers change their status to old numbers.
To review all numbers:
press the UP/+ button, the display will show the number stored in the
first memory location. Also, the display will show date and time.
Press the DOWN/- button, the display will show the number stored in
the last memory location.
Use the UP/+ and DOWN/- buttons to review all numbers
How to delete Clip numbers
♦
UP/+
DOWN/-
DEL/TIME
To delete an individual number:
press the UP/+ or DOWN/- button to
select the number you want to remove.
Press the DEL/TIME button twice. The
number will be removed.
Using the UP/+, DOWN/- and DEL/TIME
buttons the remaining numbers can be
removed.
♦
To delete all numbers:
press the UP/+ or DOWN/- button.
Press and hold the DEL/TIME button, until the
telephone will show - - - End - - -. After several
seconds, the telephone will return to standby
mode. All numbers will be deleted.
VIP function
VIP function allows important CLIP numbers to be saved
from deletion. Every number, which is saved from deletion, will be indicated by
the VIP symbol.
UP/+
DOWN/-
To save a number:
press the UP/+ or DOWN/- button to
select the number to be saved.
25
IV. Clip (Caller ID)- Calling line identification presentation
RECALL/VIP
UP/+
DOWN/-
LJ-120
Press the RECALL/VIP button. The
display will show the VIP symbol.
The above steps can be repeated for the
next number.
If no further buttons are pressed, the
telephone will return to standby mode after
several seconds. The settings will be stored.
To remove the VIP symbol :
press the UP/+ or DOWN/- button to
select the VIP number.
Press the RECALL/VIP button. The VIP
symbol will disappear from the display.
The above steps can be repeated for the next
number.
How to make a call from Clip memory
UP/+
DOWN/-
BACK/ARD
To make a call:
♦ press the UP/+ or DOWN/- button to
select the number.
♦ Now, press the BACK/ARD button. The
2-way speaker function will be switched
on and the number will be dialed
automatically.
♦ Replace the handset or press the
SP-PHONE button to end the call.
SP-PHONE
Special case!
It may happen, that the number identified was stored without a prefix, which is
necessary to make long distance calls. Your telephone allows a prefix to be
added at the beginning of the number automatically.
How to set the prefix
SET/HOLD
UP/+
To set the prefix:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦ Press the UP/+ or DOWN/- button until the
display will show EXT. PREFIX.
DOWN/-
26
IV. Clip (Caller ID)- Calling line identification presentation
♦
SET/HOLD
UP/+
DOWN/-
♦
♦
♦
DEL/TIME
LJ-120
Press the SET/HOLD button. The display
will show - - - . The first dash will be
flashing
Press the UP/+ or DOWN/- button to enter
the prefix.
Press the SET/HOLD button. The second
dash will start to flash. Now, the second
digit of the prefix can be entered.
Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the telephone will return to standby
mode after several seconds. The setting will be stored.
Note!
To remove the prefix, you must set three dashes again.
UP/+
DOWN/-
BACK/ARD
To make a call using a number without a
prefix:
♦ press the UP/+ or DOWN/- button to
select the number.
♦ Press the BACK/ARD button.
The 2-way speaker function will be
switched on, the prefix will be added and
the number will be dialed automatically.
♦ Replace the handset or press the
SP-PHONE button to end the call.
How to set the local area code
At present, a local area code does not need to be entered to make local calls.
This function can only be used to specify local numbers. Entering a local area
code in the memory removes it from all numbers, which belong to the same
area.
To enter the local area code:
♦ press the SET/HOLD button, the display
will show LANGUAGE.
♦
Press the UP/+ or DOWN/- button until the
SET/HOLD
display will show LOCAL CODE.
♦ Press the SET/HOLD button. The display
UP/+
DOWN/will show five dashes. The first dash will
be flashing
27
IV. Clip (Caller ID)- Calling line identification presentation
♦
UP/+
DOWN/-
♦
♦
DEL/TIME
LJ-120
Press the UP/+ or DOWN/- button to enter
the first digit of the local area code.
Press the SET/HOLD button. The second
dash will start to flash. Now, the second
digit of the prefix can be entered, etc.
Press the DEL/TIME button twice. The
telephone will return to the standby mode.
If the DEL/TIME button is not pressed, the telephone will return to standby
mode after several seconds. The setting will be stored.
Note!
To remove the local area code, you must set the dashes
again.
28
V. Phone-book
LJ-120
V. Phone-book
The phone-book enables you to enter names and phone numbers, and then to
recall, edit and call back. You can store a maximum of 93 records.
How to enter the name and number
To enter the name and number:
♦ press the BOOK button, the display will
UP/+
show EDIT SEARCH.
♦ Press the UP/+ button, the display will
BOOK
show INPUT NAME.
♦ Using the keypad enter the name.
1
4
7
2
5
8
0
ABC
GHI
PQRS
JKL
TUV
3
6
9
DEF
MNO
WXYZ
#
Entering a name:
to enter an alphabetic character, find the
numeric dial key it appears on, then press that
key once to advance one character in the
sequence on the key. To enter a space use
the 0 button.
For example.
If you wish to enter JAN KOWALSKI:
press the 5 button once to enter J, the
cursor moves right,
press the 2 button once to enter A,
press the 6 button twice to enter N,
if you want to enter a space, press the 0
button,
next,
press the 5 button twice to enter K,
press the 6 button three times to enter O,
press the 9 button once to enter W,
press the 2 button once to enter A,
press the 5 button three times to enter L,
press the 7 button four times to enter S,
press the 5 button twice to enter K,
press the 4 button three times to enter I,
Name JAN KOWALSKI was entered.
Note!
The telephone allows to enter the big letters only. I you want
to delete an incorrect digit/letter, press the DEL/TIME button.
29
V. Phone-book
LJ-120
♦
♦
BOOK
1
4
7
2
5
8
0
ABC
GHI
JKL
PQRS
TUV
3
6
9
♦
DEF
MNO
WXYZ
SP-PHONE
♦
#
Press the BOOK button, the display will
show INPUT NUMBER.
Using the keypad, enter the telephone
number you want to store.
Press the BOOK button to confirm the
setting, the display will show INPUT
NAME. Now, you can store the next name
and number.
If you do not want to enter any further
names and numbers, press the BOOK
button twice or SP-PHONE button once,
the telephone will return to standby mode.
Note!
I you want to enter a pause, press the RD/P button. The display
will show P.
How to search and review the name and number
BOOK
UP/+
DOWN/-
To search and review the name and
number:
♦ press the BOOK button, the display will
show EDIT SEARCH.
♦ Press the DOWN/- button, the display will
show the name and number from the first
memory location.
♦ Use UP/+ or DOWN/- button to scroll
through the phone-book until the required
name is located,
or
♦ press the button with the first letter of the
required name,
for example:
if you wish to begin with the name JAN
KOWALSKI, press the 5 button once, this will
bring the letter J onto the screen.
♦
Lift the handset briefly to return to the
standby mode.
30
V. Phone-book
LJ-120
How to edit the phone-book
Once you have stored your Phone-book entries, you can change any of the
stored information.
To edit the phone-book:
♦ press the BOOK button, the display will
show EDIT SEARCH.
♦ Press the DOWN/- button, the display will
show the name and number from the first
memory location.
♦
Use UP/+ or DOWN/- button to scroll
BOOK
through the phone-book until the required
name is located.
♦ After selecting the name, press the BOOK
button, at the end of the name a flashing
cursor will appear.
UP/+
DOWN/♦ Enter the required changes in the name,
♦ Press the BOOK button again, a flashing
cursor will appear at the end of the
number.
♦ Use the DEL/TIME button and the keypad
to enter changes.
♦ Press the BOOK button to confirm the
setting. The display shows INPUT NAME,
now, you can store a new name
DEL/TIME
or
if you do not press any further buttons, the
telephone will return to standby mode
after several seconds.
How to delete a name and number from the phone-book
DEL/TIME
To delete a name and number:
♦ find the name (number) you want to
remove.
♦ Press the DEL/TIME button twice, the
name and number are now deleted,
♦ Within several seconds, if you do not
press any further buttons, the telephone
will return automatically to standby mode.
31
V. Phone-book
LJ-120
How to make a call from the phone-book
BACK/ARD
To dial a number from the phone-book:
♦ find the name-number where you want to
call back.
♦ Press the BACK/ARD button, the number
will be dialed automatically.
Note!
If the power is cut off, the data of the phone-book will
not be deleted.
32
VI. Connecting the headphone
LJ-120
VI. Connecting a headphone
The telephone is equipped with a socket, which allows a headphone to be
connected.
33
VII. Help
LJ-120
VII. Help
Please read this Troubleshooting Guide in case of difficulty.
♦ No signal in the handset:
check that the telephone is connected to
the telephone line.
♦
No dial tone:
check that the telephone is connected to
the telephone line,
check that the MODE P/T switch is in the
correct position.
♦
In standby mode (when the handset is
on the base unit), the display shows
nothing:
check that batteries are correctly inserted
into the battery compartment,
the batteries may be dead.
♦
The telephone rings quietly:
check that the RINGER LOW/HI switch is
in the correct position.
♦
Unable to switch on the 2-way
speakerphone function:
the batteries are dead,
no batteries in the battery compartment.
♦
No CLIP:
Clip function is not activated by your
Provider.
♦
Alarm function does not work:
check that there are batteries are in the
battery compartment,
the batteries may be dead.
34
VII. Help
LJ-120
Important advice
♦
♦
♦
♦
♦
♦
Never use your telephone during a
thunderstorm. Unplug it from the
telephone line and the mains socket when
there are storms in your area
The telephone should not be installed near
a sink, bath or shower. Electrical
appliances can cause serious injury if the
user is wet or standing in water.
The telephone should be cleaned only
when disconnected from the telephone
PTT line.
Please clean the telephone with a soft
cloth to prevent scratching.
Do not use chemical sprays or aerosols to
clean the telephone.
Do not put the telephone in a wet, damp
place or, in bright sunlight or where it
could be damaged.
35
CE declaration
LJ-120
DECLARATION OF CONFORMITY
Przedsiębiorstwo “DARTEL”
MANUFACTURER'S NAME:
ADDRESS:
29-100 Włoszczowa, Podlipie 26
TYPE OF PRODUCT:
Corded phone
PRODUCT NAME:
LJ-120
We inform, our products conform to the requirements of
the following Directives and Norms:
1) Radio & Telecom Terminal Equipment Directive 99/5/EEC,
2) Low Voltage Directive 73/23EEC,
norm PN-EN 60950 -1,
3) Electromagnetic Compatibility Directive (EMC) 89/336/EEC,
norm PN-EN 55022,
norm PN-EN 55024,
norms PN-EN 61000-4/-2/-3/-4/-5/-6/-8/-9/-11/.
In additional, our products fulfill the requirements contained in:
1) norm PN -T - 83001,
2) enclosure no. 18, Communication Minister's decree
from 04.09.1997.
Date:
October 2005
36
Przedsiębiorstwo“DARTEL”
Podlipie 26
29-100 Włoszczowa
tel./fax: 0 (41) 39 14 733
www.dartel.com.pl
e-mail: [email protected]
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement