MoDular line stations

MoDular line stations
MODULAR line Stations
Build your own station according to your soldering and rework needs
All components can be easily combined to get your
complete personalized set-up.
You can choose different control units according
to the number of tools you need and
every unit accepts any JBC tool.
For a basic working system, you need
1 control unit, 1 stand, 1 tool and 1 cartridge.
10
Control Units
DI
DD
DT
1 tool
2 tools
4 tools touchscreen
MS / MV
PS
Desoldering Suction Modules
Power Supply
Stands
CL9885
AD
Tip Cleaning
Stand
AP
PA
HT
DS
DR
Tools
T210
T470-A
T245
AP130
PA120
HT420
DS360
DR560
Precision
Handpiece
Comfort
Handpiece
us
Handpiece
Solder Feed
Iron
Micro
Tweezers
Thermal
Tweezers
Micro
Desoldering
Iron
Desoldering
Iron
Control Units
DI 1 Tool Control unit · 230V
The DI features a digital read-out display for accurate temperature and tool control.
The Control unit features adjustable Sleep & Hibernation modes, as well as adjustable temperature settings.
All values can be locked by PIN.
All JBC tools are fully connectable to all Control units (use corresponding stands for tools), including DR560 Desoldering Iron & DS360
Micro Desoldering Iron in combination with either JBC’s Suction Modules MS-A or MV-A.
DI-2B 1 Tool Control unit
This Control unit was designed for production and rework applications for low to medium thermal requirements.
Basic specifications
Output Peak power:
Sleep power:
Hibernation power:
Temperature range:
Weight:
130W
10W
8W
90-450 ºC
2 kg
For a basic working system the following is needed:
1 Control unit
1 Tool with its corresponding Stand & Cartridge or Tip.
12
MS & MV Desoldering Suction Modules
These Modules are indispensable for a complete Desoldering process.
The Control unit regulates the temperature, while the Suction Module sucks in the solder.
MS-A Electric Suction Module
The Electric Suction Module with overdrive startup function
that offers quick collection of solder before it cools down.
This Suction System is regulated by the Control unit.
Basic specifications
Power: Supply: Weight: 12W
24V
1,2 Kg
MV-A Pneumatic Suction Module
The Pneumatic Suction Module uses compressed air
and a Venturi valve.
The system offers outstanding desoldering results because of
its immediate suction response.
Basic specifications
Power: Supply:
A pressure: Weight: 3W
24V
4-6 Bar
0,7 Kg
DD 2 Tools Control unit · 230V
The DD manages different tools simultaneously and offers full connectivity to any JBC tools.
This means the user can build his own soldering or rework station depending on the task. This Control unit manages each tool’s
parameters independently such as temperature limits or the Sleep & Hibernation modes. All values can be locked with a PIN.
The DD features a TFT color screen which can be tilted to suit user’s viewing angle and provides connections to extend functionalities:
Peripheral modules, PC communication and Robotic system compatibility.
DD-2C 2 Tools Control unit
This control unit offers connectivity for working with 2 tools
simultaneously.
Basic specifications
Output peak power:
Sleep power: Hibernation power: Temperature range: Weight: Screen: 150W
20W
10W
90-450ºC
3,6 kg
TFT 2,8” (240 x 320 px)
For a basic working system the following is needed:
1 Control unit
1 Tool with its corresponding Stand & Cartridge or Tip
Temperature levels
You can set up to 3
temperature levels.
Quick access if this
option is activated
TFT screen with
capacitive keyboard
This large TFT 2.8” color display facilitates the user interaction.
The menu is intuitive and easier to use thanks to the improved interface usability.
The working screen shows at a glance the selected tool with its corresponding port, the tip’s working temperature and the power indicator.
The user can adjust the temperature at any time.
14
The user can tilt
the display to suit the
viewing angle.
USB-A port
The latest software can be downloaded
from www.jbctools.com by using a USB device.
Peripheral connector
Work simultaneously with
4 tools and with up to 8
peripherals
(4 modules + 4 pedals)
USB-B port
By using this port and HUB,
the user can monitor and
manage several stations
from one PC.
Robot connector
RJ-12 output for a RS-232 connection with a protocol for robots.
This option requires an external robotic system in which
the robot manages the JBC control unit.
JBC does not manufacture robotic systems nor special solder reels
for robots like the one shown in the photo.
DT 4 Tools Touchscreen · 230V
The DT Touchscreen Control unit allows you to work with up to 4 tools simultaneously.
By using the TFT screen + intuitive interface, you get faster access to the main menu and obtain useful information at a glance.
It provides different connectors to extend functionalities: Peripheral modules, Full communication station-PC
(including one RJ-45 LAN port to manage and monitor parameters) and Robotic system compatibility.
In addition, DT station allows you to create a Soldering Net by linking up to 3 PS Power Supply Control units.
Additional features
Partial counters, Clock, Calendar, Claculator, Note book, Alarm, Unit converter, Catalogue, Manuals and Videos. This Control unit also
offers 6 language options (English, French, German, Italian, Spanish, Chinese and others coming soon).
DT-2A 4 Tools Toucscreen
This control unit allows you to work simultaneously with
4 Soldering or Desoldering Irons.
Basic specifications
Output peak power :
Sleep power: Hibernation power: Temperature range: Weight: Screen:
160W
20W
10W
90-450ºC
4,4 kg
TFT 3.5” and 240 x 320 pixels
For a basic working system the following is needed:
1 DT Control unit
1 Tool with its corresponding Stand & Cartridge or Tip
RS-232
Robot
RJ-45 LAN
TFT Touchscreen
This large TFT 3,5” color display facilitates the user’s interaction.
The menu is intuitive and easier to use thanks to the improved interface usability.
The working screen shows at a glance the selected tool with its corresponding port,
the tip’s working temperature and the power indicator.
The user can adjust the temperature at any time.
16
USB-A port
The latest software
can be downloaded
from www.jbctools.com
by using a USB device.
PS Power Supply · 230V
The DT Touchscreen station allows you to link up 3 different PS Power Supply Control units which work with up to 4 tools
simultaneously. Each PS joins its 4 ports with pedals and modules such as the MN Nitrogen Flow Regulator,
the MS/MV Desoldering Suction Modules or the FS Fume Extractor.
The IM2496 Intelligent Peripheral in needed to connect modules and pedals to the corresponding port.
The P-005 Pedal makes the tool enter sleep or extractor mode, which means the power supply is cut to allow the tip to cool down to
room temperature. The pedal can also be set to enable/disable the module which it is connected to.
PS-2A Power Supply
PS Power Supply Control unit allows you to create a Soldering Net when used with DT Touchscreen.
Basic specifications
Output peak power :
Sleep power: Hibernation power: Temperature range: Weight: 160W
20W
10W
90-450ºC
4,3 kg
For a basic working system the following is needed:
1 PS station
1 DT Control unit
1 Tool with its corresponding Stand & Cartridge or Tip
RJ-12 output for RS-232 connection
Peripheral Connections
Work simultaneously with 4 soldering or desoldering tools
and with up to 8 peripherals (4 modules + 4 pedals).
MS-A
Electric Suction Module
DS-SD Stand
DT Touchscreen station
Also possible with DD-C and HD-C
DS360-A
Micro Desoldering Iron
18
IM2496 Intelligent Peripheral
The peripheral connections of JBC’s stations increase your soldering options
The DD and DT stations allows you to link up different IM2496 intelligent peripherals which join station ports with modules
such as the MN Nitrogen Flow Regulator, the MS/MV Suction Modules or the FS Fume Extractors.
You can connect a pedal to each port to make the tool enter in sleep or in extractor mode.
The extractor mode means the power supply is cut to allow the tip to cool down to room temperature.
The pedal can also be set to enable/disable the module which it is connected to.
For a basic working system the following is needed:
1 DD or DT Control units
1 Tool with its corresponding Stand & Cartridge or Tip
1 IM2496 Intelligent Peripheral
1 Module
1 Optional pedal
MN
Nitrogen Flow Regulator
P-005 Pedal
IM2496
IM2496
Intelligent Peripheral
You can add up to
4 different IM2496
Intelligent Peripherals with
1 module and 1 pedal
for each one
Soldering Net
Extend x4 your DT’s working possibilities
The DT Touchscreen Control unit station allows you to link up 3 different PS stations to create a Soldering Net.
Each PS Power Supply and DT Touchscreen join their ports to pedals and modules such as the MN Nitrogen Flow Regulator,
the MS/MV Desoldering Suction Modules or the FS Fume Extractor.
The IM2496 Intelligent Peripheral is needed to connect modules and pedals to the appropriate port.
MS-A
Electric Suction Module
RJ-12 output for a RS-232 connection
DT-A 4 Tools
Touchscreen
IM2496 Intelligent Peripheral
connection
to another
IM2496
DR-SD Stand
AD-SD Stand
HT-SD Stand
AD-SD Stand
DS-SD Stand
DR560-A
Desoldering Iron
T245-A Handpiece
HT420-A Thermal Tweezers
T210-A Precision Handpiece
20
DS360-A
Micro Desolderi
MS-A
Electric Suction Module
PS Power
Supply
RJ-12 output for a RS-232 connection
IM2496 Intelligent Peripheral
connection
to another
IM2496
AD-SD Stand
PA-SD Stand
AD-SD Stand
ing Iron
T245-A Handpiece
PA120-A Micro Tweezers
T210-A Precision Handpiece
Stands
JBC’s stands feature a line-up covering the range of JBC’s Advanced Series Tools.
The stands are placed between the Control unit and the tool for optimum performance, like the temperature reduction in sleep
mode when the tool is placed in the stand for extended tip-life and less oxidation.
The cartridge extractor system featured in the stands AD-SD and DN-SD
permits switching cartridges without the need to interrupt your work.
All stands can be connected to all Modular line stations.
AD-SD
For T210 and T245 Handpieces
Includes
3 cartridges extractor for C210 or C245
Quick Cartridge change
Sleep mode
Cable collector
keeps working area
free of cable.
Quick tip changer
Save time and increase
productivity by using the Quick
Cartridge Changer.
Suit position
The tool stand and the
cable collector are
easily adjustable.
Intelligent Heat Management
As a result, a JBC tip life
lasts up to 5 times longer
than other brands.
22
Accessories
AP-SD
For AP130-A Solder Feed
Iron
Includes
Sleep mode
A1287 Accesory for the Desoldering Silicon Tube
Extension accessory for Desoldering Iron.
Includes a cable of 1.5 m length.
A1286 Kit extention lead for Stand
For increased distance between stand and control unit.
Includes a cable of 1.5 m length with corresponding
connectors on each side.
HT-SD
For HT420-A Thermal
Tweezers
Includes
Sleep mode
SC-A Cartridge Stand
Stand for removal and insertion of up to 12 cartridges
of the C245 Cartridge range.
Offers perfect view for quick selection of cartridges.
PA-SD
For PA120-A Micro Tweezers
Includes
Sleep mode
DR-SD
For DR560-A Desoldering Iron
Includes
Sleep mode
BE-SA Solder reel stand
The ideal accessory for easy soldering wire supply.
DS-SD
For DS360-A
Micro Desoldering Iron
Includes
Sleep mode
DN-SD
For T245-NA Nitrogen Handpiece
Includes
Sleep mode
Specifications
Can be used vertically and horizontally.
For reels in standard DIN sizes.
Capacity: reels of 1 kg and 2,5 Kg max.
Supplied without tin wire.
Cleaning systems
JBC offers different methods for cleaning tips, designed for removal of oxidation, residues, flux etc.
With the implementation of lead-free soldering it has become necessary to use methods for cleaning tips other
than with a simple damp sponge. The damp sponge can be replaced by dry cleaning methods like metal wool or metal brushes.
Of all the cleaning methods, the sponge is the least harmuful and the brush is the most aggressive. Using either depends on how
much residue needs to be removed, which in turn is a result of work temperature and the type of solder.
CL9885 Tip Cleaning Stand
The Tip Cleaning Stand is designed to be used next to the point of work.
With its weight and non-slip base it can be used
without having to hold the base down
while cleaning the tips.
Splashguard
It minimises splashing of solder
particles when using the metal or
brass wool
CL6210 Brass Wool
Very effective cleaning
method. It leaves a small
layer of solder on the tip to
prevent oxidation between
cleaning and rewetting
S0354 Sponge
The least harmful
cleaning method. Keep
the sponge damp with
distilled water when
working to avoid tip wear
CL0236 Tip Wiper
A temperature resistant receptacle allows the operator
eliminate the excess of solder by gently tapping
Optional Methods
CL6205 Inox Wool
A stronger cleaning method
than brass wool
24
CL6220 Brushes
For a more thorough
cleaning of the tips
TT-A Tip Tinner
Chemical system to clean
and re-tin the tips
CL6211 Sand
Only recomended when
other methods fail
CLM4000 Automated Tip Cleaner
The CLM4000 is an Automated Tip Cleaner consisting of 2 motorized brushes that start/stop working when a photoelectric sensor
detectes the soldering tip at the window. The user just needs to bring the tip gently to the cleaner window and let the system work
for as long as necessary. This means less effort and greater comfort.
Basic specifications
Maximum power: Standby power: Brush speed: Brush diameter: Weight: Splashguard
11W
2,1W
700 – 1000 rpm
50 mm
1,1 Kg
Photoelectric Sensor
Open Button
This innovative cleaner is supplied with a wall transformer and two brass brushes which are
designed with the most appropriate materials to ensure the least damage to the tip.
The wide Splashguard guarantees the minimum tin splashes.
One of JBC’s goals is to create the best working complements to extend the tip life and
ensure the success of any soldering job.
Brass Brushes
Nickel Silver Brushes
Tools
JBC’s wide range of tools feature soldering and rework irons that guarantee maximum effciency.
The short distance tip-to-grip gives you more control and the highest precision.
JBC tools are currently the smallest, the lightest and the most ergonomic.
NANO Tools
The smallest soldering tools, designed for the smallest SMD components like chips 0201 and even smaller.
Perfect for working with a magnifying glass thanks to its easy handling and reduced weight.
Cartridges are interchangeable like all others from the Advanced range, and are capable of giving out
15W of power, in spite of their reduced size.
NP105-A Nano Tweezers
Perfect for soldering and desoldering very small chip components.
Uses C105 Cartridges
NT105-A Nano Soldering Handpiece
For high-precision soldering jobs
Uses C105 Cartridges
Precision Handpieces
T210-A Precision Handpiece
For precision applications.
Uses C210 cartridges.
F3450 Fume Extractor
For T210 Precision Handpieces
T210-PA Precision Blue Handpiece
The blue grip allows the user to identify the tool for leaded jobs from the lead-free ones.
26
Handpieces
T245 Handpieces for general soldering purposes are able to provide up to 160W, if necessary.
With appropriate cartridge, it is perfect for both SMD components and for jobs with high power requirements (eg., ground plane soldering).
It works with C245 family of cartridges, the largest one.
T245-A Handpiece
F3449 Fume Extractor
For T245 Handpieces
T245-PA Blue Handpiece
The blue grip allows the user to differentiate the
tool for leaded jobs from the lead-free ones.
F6457 Fume Extractor
For T470 Comfort Handpieces
Nitrogen Handpiece
The T245-NA Nitrogen Handpiece offers extra heat to the solder joint and helps prevent tip oxidation.
The nitrogen flow must be provided by the GN-A or a nitrogen supply at the operator´s bench.
T245-NA
For Nitrogen Soldering jobs the handpiece incorporates a screw for securing the cartridges.
Comfort Handpieces
T470 Handpieces has been specially designed for intensive soldering jobs with high power requirements such as soldering components
to large ground planes, production of solar panels, armor and other applications.
T470-A Comfort Handpiece with screw
It incorporates a screw for securing the cartridges. Ideal for high
intensity jobs where NO cartridge change is needed.
T470-SA Long Handpiece
Supplied with a 3 m length cable.
T470-FA Comfort Handpiece
It incorporates a grip of insulating material and features a
set-screw which prevents the cartridge from rotating.
T470-MA Long Comfort Handpiece
This model is supplied with a 3 m length cable.
micro & thermal Tweezers
PA120-A Micro Tweezers
The PA120-A are designed for soldering and desoldering SMD micro components.
Each cartridge is individually controlled by the control unit, guaranteeing fast heating-up,
accuracy and temperature recovery.
The C120 range of cartridges is made for desoldering
a wide variety of components.
The PA120-A Micro Tweezers can be connect to JBC stations
DI, DD, DT and PS Control Units and CP from Compact Line.
Supplied without cartridges.
HT420-A Thermal Tweezers
The HT420-A are designed specifically for soldering and desoldering small and medium
sized SMD components. A cable strip cartridge is also available.
Each cartridge is individually controlled by the control unit, guaranteeing
fast heating-up, accuracy and recovery of temperature.
Uses C420 cartridge range.
The HT420-A Thermal Tweezers connected to JBC station
DI, DD, DT and PS Control Units.
Supplied without cartridges.
Solder feed Iron
AP130-A Solder Feed Iron
The AP130-A offers a ‘third hand’ by feeding soldering wire of diameters 0.8 to 1 mm.
Specifically suitable for high-volume soldering jobs,
and whenever an extra hand is needed.
The iron connects to JBC stations
DI, DD, DT and PS Control Units.
Supplied with cartridge C130-403.
F1204 Fume Extractor
For AP130-A Solder Feed Iron
28
SN5450
Solder Reels for AP-A
Supplied with lead free
solder reel 99% Sn / 0,3% Ag / 0,7% Cu with 50g solder.
desoldering Irons
DS360-A Micro Desoldering Iron
The DS360-A Micro Desoldering Iron adapts to the ever-decreasing size of new components.
Very easy cleaning and maintenance. Tips are easily inserted with a gentle pushing.
Uses C360 Tip Range.
The iron connects to JBC stations CS, CV and DI, DD, DT and PS Control Units using MS or MV Suction Module.
Supplied with C360-004 Tip.
Desoldering Tip
Desoldering body with Heater
Exchangeable Filter set
DR560-A Desoldering Iron
Very easy cleaning and maintenance.
Two different types of solder residue chambers are available: metal and glass.
Tips are easily placed by thread.
Uses C560 Tip Range.
The Desoldering Iron connects to JBC stations DI, DD, DT and PS Control Units using MS or MV Suction Module.
Supplied with C560-003 Tip.
Desoldering body
Desoldering Tip
Vacuum Connector
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement