Samsung | BD-J5900 | 用戶手冊 | Samsung 藍光播放器 BD-J5900 用戶手冊

BD-J5900
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
Safety Information
Warning
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
-- Do not place this apparatus in a confined
space, such as a bookcase, or builtin cabinet, unless proper ventilation is
provided.
-- Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
-- Do not place vessels (vases etc.)
containing water on this apparatus. A
water spill can cause a fire or electric
shock.
• Do not expose this apparatus to rain or place
it near water (near a bathtub, washbowl,
kitchen sink, or pool, etc.). If this apparatus
accidentally gets wet, unplug it and contact
an authorized dealer immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of
these batteries properly. Please contact
your local authorities for disposal or
recycling information.
2
This symbol indicates that high voltage is present inside. It is dangerous
to make any kind of contact with any
internal part of this product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with
this product.
• Do not overload wall outlets, extension
cords or adaptors beyond their capacity,
since this can result in fire or electric shock.
• Route power-supply cords so that they
are not likely to be walked on or pinched
by items placed on or against them. Pay
particular attention to cords at the plug
end, at wall outlets, and the point where
they exit from the apparatus.
• To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the set due to lightning and
power line surges.
• Before connecting the AC power cord
to the DC adaptor outlet, make sure the
voltage designation of the DC adaptor
corresponds to the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may
create a danger of electric shock.
• To avoid electric shock, never touch the
inside of this apparatus. Only a qualified
technician should open this apparatus.
• Make sure to plug the power cord in until
it is firmly seated. When unplugging the
power cord from a wall outlet, always pull
on the power cord’s plug. Never unplug by
pulling on the power cord. Do not touch
the power cord with wet hands.
• If this apparatus does not operate normally
- in particular, if there are any unusual
sounds or smells coming from it - unplug
it immediately and contact an authorized
dealer or service center.
• Maintenance of Cabinet.
-- Before connecting other components to
this product, be sure to turn them off.
-- If you move your product suddenly
from a cold place to a warm place,
condensation may occur on the
operating parts and lens and cause
abnormal disc playback. If this occurs,
unplug the product, wait for two hours,
and then connect the plug to the power
outlet. Then, insert the disc, and try to
play back again.
• Be sure to pull the power plug out of the
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone
in the house).
-- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by
causing the power cord to generate
sparks and heat or the insulation to
deteriorate.
• Contact an authorized service center for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station,
etc. Failing to do so may lead to serious
damage of your product.
• Use only a properly grounded plug and wall
outlet.
-- An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
• To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
• Do not allow children to hang on the
product.
• Store the accessories (battery, etc.) in a
location safely out of the reach of children.
• Do not install the product in an unstable
location such as a shaky self, a slanted
floor, or a location exposed to vibration.
• Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service center.
• To clean this apparatus, unplug the power
cord from the wall outlet and wipe the
product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals
can damage the appearance of the product
or erase the printing on the product.
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• There is danger of an explosion if you
replace the batteries used in the remote
with the wrong type of battery. Replace
only with the same or equivalent type.
• WARNING - TO PREVENT
THE SPREAD OF FIRE,
KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• WARNING - This product contains
chemicals known to the State of California
to cause cancer and reproductive toxicity.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
• THIS PRODUCT USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE
IF DIRECTED. BE SURE TO OPERATE
PRODUCT CORRECTLY AS INSTRUCTED.
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
✎✎ NOTES
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
`` If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of
this product, the product cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is
supplied with a molded plug incorporating
a fuse. The value of the fuse is indicated
on the pin face of the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover
omitted if the cover is detachable. If a
replacement fuse cover is required, it must
be of the same colour as the pin face of
the plug. Replacement covers are available
from your dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then
safely dispose of the plug. Do not connect
the plug to a mains jack, as there is a risk of
shock hazard from the bared flexible cord.
To disconnect the apparatus from the
mains, the plug must be pulled out from
the mains socket, therefore the mains plug
shall be readily operable.
The product unit accompanying this user
manual is licenced under certain intellectual
property rights of certain third parties.
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or sold
with the apparatus.
When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
3
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort
while viewing 3D TV such as dizziness,
nausea, and headaches.
If you experience any such symptom,
stop viewing 3D TV, remove the 3D Active
Glasses, and rest.
• Watching 3D images for an extended
period of time may cause eye strain. If you
feel eye strain, stop viewing 3D TV, remove
your 3D Active Glasses, and rest.
• A responsible adult should frequently check
on children who are using the 3D function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have the
child stop viewing 3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.).
• Do not use the 3D function or 3D Active
Glasses while walking or moving around.
Using the 3D function or 3D Active Glasses
while moving around may cause you to
bump into objects, trip, and/or fall, and
cause serious injury.
• If you want to enjoy 3D content, connect
a 3D device (3D compliant AV receiver or
TV) to the player's HDMI OUT port using a
high-speed HDMI cable. Put on 3D glasses
before playing the 3D content.
4
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT
port.
• As the video resolution in 3D play mode
is fixed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.
• Some functions such as BD Wise, screen
size adjustment, and resolution adjustment
may not operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46-inch
screen, stay 138 inches (11.5 feet) from the
screen.
• Place the 3D video screen at eye level for
the best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function
properly.
• This player does not convert 2D content
into 3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
Contents
SAFETY INFORMATION
Picture Settings.......................................... 11
Precautions.................................................. 3
Network Settings........................................ 13
Warning........................................................ 2
Using the 3D function................................... 4
GETTING STARTED
Before using the User Manual....................... 5
Logos of Discs the player can play............... 5
Accessories.................................................. 7
Front Panel................................................... 7
Rear Panel.................................................... 7
Remote Control............................................ 8
Sound Settings........................................... 12
System Settings......................................... 16
Language Settings...................................... 17
Security Settings........................................ 17
General Settings......................................... 17
Support Settings........................................ 18
MEDIA PLAY
Playing a Commercially Recorded Disc....... 19
Playing Files on a USB Device.................... 19
CONNECTIONS
Playing a Disc with User Recorded
Content...................................................... 19
Connecting to an Audio System................... 9
Controlling Video Playback......................... 20
SETTINGS
Playing Photo Contents.............................. 22
Connecting to a TV....................................... 8
Connecting to a Network Router.................. 9
Using DLNA................................................ 20
Controlling Music Playback......................... 21
The Setup Procedure.................................. 10
APPENDIX
Accessing the Settings Menu..................... 11
Specifications............................................. 24
Menu Navigation......................................... 10
Troubleshooting.......................................... 23
Getting Started
Region Code
Before using the User Manual
Disc Types and Contents your player can play
Media
VIDEO
MUSIC
PHOTO
✎✎ NOTES
Disc Type
Blu-ray Disc
3D Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing DivX,
MKV or MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Number for this player is
displayed on the rear panel of the player.
Disc
Type
Region
Code
Blu-ray
Disc
B
C
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
25 Mbps.
`` Playback may not work for some types of discs, or when you use specific functions, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to
this if necessary.
`` When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
``
``
``
``
Disc types your player cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW (VR mode) • 3.9 GB DVD-R for
Authoring.
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
A
DVDVIDEO
1
2
3
4
5
6
Area
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
India, China, Russia, Central
and South Asia.
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle
East, Egypt, Africa, Greenland
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
Russia, Eastern Europe, India,
North Korea, Mongolia
China
Logos of Discs the player can play
Blu-ray Disc
BD-LIVE
3D Blu-ray Disc
DivX
NTSC broadcast system in U.S.A, Canada, Korea,
Japan
Supported File Formats
Notes on the USB connection
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
• The player does not support folder or file
names longer than 128 characters.
• Some USB/External HDD/digital camera
devices may not be compatible with the
player.
• Your player supports the FAT16, FAT32,
and NTFS file systems.
• Connect USB devices directly to the
player’s USB port. Connecting through
a USB cable may cause compatibility
problems.
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
• The player does not support the PTP
protocol.
5
• Do not disconnect a USB device during a "loading" process.
• The bigger the image resolution, the longer the image takes to display.
• This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from
commercial sites.
• Your player only supports video with a frame rate under 30fps (frames per second).
• Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with this
player.
• If some USB devices require excessive power, they may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into a
wall socket.
If the problem continues, contact the USB HDD manufacturer.
• SAMSUNG is not responsible for any data file damage or data loss.
• Your player does not support NTFS compressed files, sparse files, or encrypted files.
• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Video File Support
File Extension
*.avi
Container
AVI
Video Codec
Audio Codec
DivX 3.11/4/5/6
MP3
Dolby Digital
DTS
WMA
PCM
MP4v3
H.264 BP/MP/HP
*.mkv
6
MKV
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
MPEG
*.rmvb
RMVB
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
RV8/9/10
(RV30/40)
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
RealAudio 6
Resolution
1920x1080
1920x1080
•• Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file
itself is corrupted.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video
playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
-- Depending on your country, RMVB format may not be supported.
•• Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
•• Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bit rate: 320kbps
Supported DivX subtitle file formats
1920x1080
„„
1920x1080
✎✎ NOTES
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
*.ttxt, *.smi, *.srt, *.sub, *.txt
`` Playback of some DivX, MKV or MP4 file may not be supported depending on their video resolution
and frame rate.
Music File Support
File Extension
Container
Audio Codec
Support Range
*.mp3
MP3
MP3
-
*.wma
WMA
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps
Front Panel
Picture File Support
File Extension
*.jpg
*.jpeg
*.jpe
Type
Resolution
JPEG
15360x8640
*.png
PNG
15360x8640
REMOTE CONTROL SENSOR
AVCHD (Advanced Video Codec High Definition)
• This player can play back AVCHD format discs. These discs are normally recorded and used
in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that
use "x.v.Color" format.
• "x.v.Color" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
✎✎ NOTES
DISC TRAY
USB HOST
POWER BUTTON
OPEN/CLOSE BUTTON
`` You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
`` Please open and pull out the USB cover before inserting USB device.
Rear Panel
✎✎ NOTES
`` Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
`` "x.v.Color" offers a wider colour range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories shown below.
HDMI OUT
AUDIO
BONUS
VIEW
HDMI Cable
Batteries for Remote
Control (AAA Size)
User Manual
HOME
REPEAT
A-B
REPEAT
LAN
DIGITAL AUDIO OUT
SUBTITLE
FULL
SCREEN
Remote Control
7
Connections
Remote Control
Tour of the Remote Control
Turn the player on and off.
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press to open and close the disc tray.
Press numeric buttons to operate options.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to stop a disc.
Press to play a disc.
AUDIO
HOME
SUBTITLE
Press to use Tools menu.
BONUS
VIEW
REPEAT
A-B
REPEAT
Allows you to repeat A-B disc.
Installing batteries
!!
8
Audio
Video
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Press to exit the menu.
Return to the previous menu.
✎✎ NOTES
Press to move to the home menu.
Use to display the playback information.
Use to select menu items and change menu
values.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use bonusview function.
Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
Use to enter the popup menu/title menu.
Use to enter the disc menu.
Press to skip backwards or forwards.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
Connecting to a TV
`` If the remote does not operate properly:
• Check the polarity (+/–) of the batteries.
FULL
SCREEN
Press to see the full screen on a TV.
During Blu-ray or DVD disc playback, the
Full screen button does not operate.
Allows you to repeat a title, chapter, track or
disc.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
CAUTION
`` Dispose of batteries according to local environmental
regulations. Do not put them in the household trash
`` Do not dispose of batteries in a fire.
`` Do not short circuit, disassemble or overheat the batteries.
`` Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
✎✎ NOTES
`` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
Out on the player to an audio system to hear audio.
`` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
`` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
`` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
`` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
`` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
Connecting to an Audio System
Connecting to a Network Router
You can connect the Blu-ray player to an audio system using one of the methods illustrated
below.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI compatible AV receiver
You can connect your player to your network router using one of the methods illustrated below.
To use the DLNA network functionality, you must connect your PC to your network as shown
in the illustrations.
The connection can be wired or wireless.
Wired Network
• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your receiver.
• Best quality (Recommended)
Broadband modem
(with integrated router)
Method 2 Connecting to an AV receiver with a Digital Coaxial Cable
• Using a digital Coaxial cable (Not supplied), connect the Coaxial Digital Audio Out jack on
the product to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Method 1
Audio
Router
Broadband
modem
Method 2
Audio
Broadband
service
Or
Broadband
service
✎✎ NOTES
`` Internet access to Samsung's software update server may not be allowed, depending on the router you use or your
ISP's policy. For more information, contact your ISP (Internet Service Provider).
`` DSL users, please use a router to make a network connection.
9
Settings
Wireless Network
The Setup Procedure
Wireless Router
Broadband service
✎✎ NOTES
`` If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless
network.
`` Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
`` The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
`` Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is
currently being used by another device nearby, it will result in interference and communication failure.
`` If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router to WEP,
TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-Fi certification
specifications.
`` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance,
distance, obstacles, interference by other radio devices, etc).
• The Home screen will not appear if you do not
configure the setup.
• The OSD (On Screen Display) may change in this
player after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
• After the setup process is complete, the panel
buttons and remote control can be operated.
After you have connected the player to your TV,
turn on the TV and player. When you turn on the
player the first time, the player's Setup screen
appears on the TV. The Setup procedure lets
you set the On Screen Display (OSD) and menu
languages, the aspect ratio (screen size), the
network type, and connect the player to your
network.
✎✎ NOTES
`` The Home menu will not appear if you do not
configure the setup except as noted below.
`` If you press the BLUE (D) button during network
setup, you can access the Home menu even if
the network setup is not completed yet.
`` When you return to the Home menu, the full
screen mode is cancelled automatically.
`` If you want to display the Setup screen again
to make changes, press the ^ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
`` After the setup process is complete. you can
operate the HDMI-CEC function.
`` If you want to use the Anynet+(HDMI-CEC)
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Setup Procedure.
`` If you leave the player in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the player is
left in the screen saver mode for more than 25
minutes, the power will automatically turn off.
Menu Navigation
AUDIO
SUBTITLE
1
3
2
4
BONUS
1
2
3
REPEAT
REPEAT
FULL
HOME Button : Press to move to the Home
menu.
VIEW
4
10
HOME
A-B
SCREEN
RETURN Button : Return to the previous menu.
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
EXIT Button : Press to exit the current menu.
• Home Menu
6
1
PLAY DISC
PHOTOS
VIDEOS
MUSIC
2
7
No Disc
8
App 1
1
2
3
4
5
6
7
8
App 2
App 3
App 4
App 5
Screen Mirroring Change Device
Settings
3
4
5
Selects VIDEOS.
2. Press the ▲▼◄► buttons to select
Settings, and then press the v button.
3. Press the ▲▼ buttons to select the
desired submenu, and then press the v
button.
4. Press the ▲▼ buttons to select the desired
item, and then press the v button.
5. Press the EXIT button to exit the menu.
✎✎ NOTES
`` The access steps may differ depending on
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
Selects MUSIC.
Selects Settings.
Selects Change Device.
Selects Screen Mirroring.
Selects PHOTOS.
Selects PLAY DISC.
Selects applications.
✎✎ NOTES
`` The Videos, Photos, and Music options require
that you have an appropriate disc inserted into
the player or a USB flash device attached to
the player.
Accessing the Settings Menu
To access the Settings menu and sub-menus,
follow these steps:
1. Press the POWER button.
The Home Menu appears.
Picture Settings
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
3D Settings
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
✎✎ NOTES
`` For some 3D discs, to stop a movie during 3D
playback, press the 5 button once.
The movie stops and the 3D mode option is
de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5
button again, then select 3D Settings in the
Blu-ray menu.
`` Depending on the content and the position of
the picture on your TV screen, you may see
vertical black bars on the left side, right side,
or both sides.
TV Aspect Ratio
Depending on the type of television you have,
you may want to adjust the screen size setting.
✎✎ NOTES
`` Depending on the disc type, some aspect
ratios may not be available.
`` If you select an aspect ratio and option
which is different than the aspect ratio of
your TV screen, the picture might appear to
be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest interconnectivity feature.
When you connect a Samsung player and
a Samsung TV with BD Wise to each other
via HDMI, and BD Wise is on in both the
player and TV, the player outputs video at
the video resolution and frame rate of the
Blu-ray Disc/DVDs.
✎✎ NOTES
`` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.
`` If the player is connected to a device that
does not support BD Wise, you cannot use
the BD Wise function.
`` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to
On.
Resolution
Lets you set the output resolution of the
HDMI video signal to Auto, 1080p, 1080i,
720p or 480p. The number indicates the
number of lines of video per frame. The i
and p indicate interlaced and progressive
scan, respectively. The more lines, the
higher the quality.
Resolution according to the output
mode
• Blu-ray Disc/E-contents/Digital Contents
playback
HDMI / connected
Output
HDMI Mode
Blu-ray Disc
Setup
BD Wise
Auto
1080p@60F
(Movie Frame : Off)
Resolution of
Blu-ray Disc
E-contents/
Digital
contents
1080p
Max. Resolution Max. Resolution
of TV input
of TV input
1080p@60F
1080p@60F
Movie Frame :
Auto (24 fps)
1080p@24F
1080p@24F
1080i
720p
1080i
1080i
480p
720p
480p
480p
• DVD playback
Output
Setup
BD Wise
720p
HDMI / connected
HDMI Mode
480i
Auto
Max. Resolution of TV input
1080i
1080i
1080p
720p
480p
1080p
720p
480p
11
✎✎ NOTES
`` If the TV you connected to the player does
not support Movie Frame or the resolution
you selected, the message "If no pictures
are shown after selecting ‘Yes’, please wait
for 15 seconds to return to the previous
resolution." appears. If you select Yes, the
TV’s screen will go blank for 15 seconds,
and then the resolution will revert to the
previous resolution automatically.
`` If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the ^ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory
default. Follow the steps on the previous
page to access each mode and select the
Display Setup that your TV will support.
`` When the factory default settings are
restored, all stored user BD data is deleted.
`` The Blu-ray Disc must have the 24 frame
feature for the player to use the Movie
Frame (24 fps) mode.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature
to Auto allows you to adjust the player’s
HDMI output to 24 frames per second for
improved picture quality.
You can enjoy the Movie Frame (24 fps)
feature only on a TV supporting this frame
rate. You can select Movie Frame only
when the player is in the HDMI 1080p
output resolution modes.
HDMI Colour Format
Lets you set the colour space format for
HDMI output to match the capabilities of
the connected device (TV, monitor, etc).
HDMI Deep Colour
Digital Output Selection
Setup
Connection
Lets you output video from the HDMI
OUT jack with Deep Colour. Deep Colour
provides more accurate colour reproduction
with greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
PCM
Audio Stream
on Blu-ray
Disc
Sound Settings
Digital Output
Lets you select the digital audio output
format that is suitable for your TV or AV
Receiver. For more details, please refer to
the Digital Output Selection table.
Audio Stream
on DVD
Definition for
Blu-ray Disc
Bitstream
(Unprocessed)
PCM
HDMI
Receiver
Coaxial
Up to 7.1ch PCM 2ch
HDMI
Receiver
Coaxial
PCM
PCM 2ch
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
HDMI supported
HDMI Receiver or
AV receiver or
Coaxial
Coaxial
Re-encoded DTS
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Dolby Digital
PCM 2ch
PCM 2ch
Dolby Digital
Dolby Digital
Re-encoded DTS
Dolby Digital Plus
PCM 2ch
PCM 2ch
Dolby Digital
Plus
Dolby Digital
Re-encoded DTS
Dolby TrueHD
PCM 2ch
PCM 2ch
Dolby TrueHD Dolby Digital
Re-encoded DTS
DTS
PCM 2ch
PCM 2ch
DTS
DTS
Re-encoded DTS
DTS-HD High
Resolution Audio
PCM 2ch
PCM 2ch
DTS
Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD Master
Audio
DTS-HD High
Resolution
Audio
Re-encoded
Dolby Digital *
PCM 2ch
PCM 2ch
DTS
Re-encoded DTS
PCM
Dolby Digital
PCM 2ch
DTS
PCM 2ch
PCM 2ch
Re-encoded
Dolby Digital *
PCM 2ch
PCM 2ch
Any
PCM 2ch
DTS-HD
Master Audio
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Outputs only main feature
Decodes main feature
audio stream so that your
audio and BONUSVIEW AV receiver can decode the
audio stream together
audio bitstream.
into PCM audio and add You will not hear BONUSVIEW
Navigation Sound Effects. audio and Navigation Sound
Effects.
PCM 2ch
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
PCM 2ch
Dolby Digital
Dolby Digital
Decodes main feature
audio and BONUSVIEW
audio stream together
into PCM audio
and add Navigation
Sound Effects, then
re-encodes the
PCM audio into DTS
bitstream
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects, then reencodes the PCM
audio into Dolby
Digital bitstream
DTS
DTS
** If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-- Navigation Sound Effects : When you choose a menu navigation selection, a Navigation
Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.
12
✎✎ NOTES
`` Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
`` If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
`` Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
`` Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
`` If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
`` If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Reencoded or Unprocessed) in the setup menu.
`` If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals
downsampled to 48KHz before they are
outputted to an amplifier. Choose On if your
amplifier or receiver is not compatible with a
96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
• Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
• Off : Leaves the dynamic range
uncompressed, letting you hear the
original sound.
• On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network Settings
To begin setting up the network connection
for your player, follow these steps:
1. In the Home menu, press the ▲▼◄►
buttons to select Settings, and then
press the v button.
2. Press the ▲▼ buttons to select
Network, and then press the v
button.
3. Press the ▲▼ buttons to select
Network Settings, and then press the
v button.
4. Press the ▲▼ buttons to select
Network Type, and then press the v
button.
5. Press the ▲▼ buttons to select Wired
or Wireless, and then press the v
button.
6. Go to the next section.
Configuring Your Network
Connection
Before you begin, contact your ISP to find
out if your IP address is static or dynamic.
If it is dynamic, and you have a wired or
wireless network, we recommend using
the Automatic configuration procedures
described below.
If you are connecting to a wired network,
connect the player to your router using a
LAN cable before you start the configuration
procedure.
If you are connecting to a wireless network,
disconnect any wired network connection
before you begin.
To begin configuring your network
connection, follow these steps:
Wired Network
ĞĞ
Wired - Automatic
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wired in the Network Settings
screen, and then press the v button.
5. Select Connect button, and then press
the v button. The product detects the
wired connection, verifies the network
connection and then connects to the
network.
ĞĞ
Wired - Manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
Follow Steps 1 and 2 in Wired - Automatic,
and then follow these steps:
1. Select Network Status. The player
searches for a network, and then
displays the connection failed message.
2. On the bottom of the screen, select
IP Settings, and then press the v
button.
The IP Settings screen appears.
3. Select the IP Setting field, and then
press the v button.
4. Select Enter manually in the IP Setting
field, and then press the v button.
5. Select a value to enter (IP Address,
for example), and then press the v
button.
Use the number keypad on your remote
control to enter the numbers for the
value. Use the ◄► buttons on the
remote control to move from entry field
to entry field within a value. When done
with one value, press the v button.
6. Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 5.
7. Repeat Steps 5 and 6 until you have
filled in all values.
13
✎✎ NOTES
8. When finished entering all the values,
and then press the RETURN or EXIT
buttons. The player verifies the network
connection and then connects to the
network.
Wireless Network
You can setup a wireless network
connection in four ways:
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
-- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices
currently connected through the player
or, if applicable, the player's current wired
connection, will be disconnected.
ĞĞ
Wireless - Automatic
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then
displays a list of the available networks.
14
2. The player searches for a network,
and then displays the connection failed
message.
Network Settings
`` You can get the Network values from your
Internet provider.
Select your network type.
Network Type
Wireless
Wireless network
Add Network
WPS(PBC)
You can connect your Blu-ray
player to the internet. Please
select which wireless network
to use.
Search
m Move " Select ' Return
5. Select the desired network, and then
press the v button.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote control.
Enter letters by selecting a letter with
an arrow button, and then pressing v
button.
7. When done, select Done and then
press the v button. The player verifies
the network connection and then
connects to the network.
8. When verification is complete, select
OK, and then press the v button.
✎✎ NOTES
`` You should be able to find the Security Code or
Pass Phrase on one of the set up screens you
used to set up your router or modem.
ĞĞ
Wireless - Manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
1. Follow the directions in Wireless Automatic through Step 5.
3. On the bottom of the screen, select
IP Settings, and then press the v
button.
The IP Settings screen appears.
4. Select the IP Setting field, and then
press the v button.
5. Select Enter manually in the IP Setting
field, and then press the v button.
6. Select a value to enter (IP Address, for
example), and then press v button.
Use the number keypad on your remote
control to enter the numbers for the
value. Use the ◄► buttons on the
remote control to move from entry field
to entry field within a value. When done
with one value, press the v button.
7. Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 6.
8. Repeat Steps 6 and 7 until you have
filled in all values.
✎✎ NOTES
`` You can get the Network values from your
Internet provider.
9. When finished, and then press the
RETURN or EXIT button. The Security
Screen appears.
10.On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a letter
with the ▲▼◄► buttons, and then
pressing the v button.
11.When finished, select Done at the right
of the screen, and then press the v
button.
The player verifies the network
connection and then connects to the
network.
12.After the player verifies the network,
select OK, and then press the v
button.
ĞĞ
WPS(PBC)
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
5. Press the ▲▼ button on your remote,
and then press the ◄► button to select
the WPS(PBC).
6. Press the v button on your remote.
The "Press the PBC button" message
appears.
7. Press the WPS(PBC) button on your
router within two minutes. Your player
automatically acquires all the network
settings values it needs and connects
to your network.
The Network Status screen appears.
The player connects to the network
after the network connection is verified.
ĞĞ
WPS(PIN)
Before you begin, open the router's setup
menu on your PC and access the screen
with the WPS PIN entry field.
1. In the Home screen, select Settings,
and then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then
press the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then
displays a list of the available networks.
5. Select the desired network, and then
press the ► button.
6. Select the WPS(PIN), and then press
the v button. The PIN pop-up
appears.
7. Enter the PIN into the WPS PIN entry
field in the router's Set Up screen and
then save the the screen.
✎✎ NOTES
`` Contact the manufacturer of the router
for instructions explaining how to access
the route's Set Up screens or refer to the
router's user's manual.
`` For WPS connection, set your wireless
router’s security encryption to AES. Setting
to WEP security encryption does not support
WPS connection.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
Wi-Fi Direct
The Wi-Fi Direct function allows you to
connect Wi-Fi Direct devices to the player
and each other using a peer-to-peer network,
without a wireless router.
✎✎ NOTES
`` Some Wi-Fi Direct devices may not support
the DLNA function if connected via WiFi Direct. If this is the case, it is advisable
to change the network connection method
between devices.
`` Bluetooth transmissions can interfere
with the Wi-Fi Direct signal. Before you
use the Wi-Fi Direct function, we strongly
recommend that you turn off the Bluetooth
function of any active mobile device.
1. Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
2. In the Home screen, select Settings, and
then press the v button.
3. Select Network, and then press the v
button.
4. Select Wi-Fi Direct, and then press the
v button.
The Wi-Fi Direct devices that you can
connect appear.
5. You have three ways to complete the WiFi connection:
• Through the Wi-Fi device.
• Through the player using PBC.
• Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the
procedure on the device for connecting
to another Wi-Fi Direct device. See the
device's user manual for instructions.
2. When you have completed the
procedure, you should see a pop-up on
your TV screen saying that a device that
supports Wi-Fi Direct has requested to
connect. Select OK, and then press the
v button to accept.
3. The Connecting pop-up appears,
followed by the Connected pop-up.
When it closes, you should see the
device listed on the Wi-Fi Direct screen
as connected.
Through the Player Using PBC
1. Select the Wi-Fi Direct device you want
to connect to this player, and then press
the v button. The PBC/PIN pop up
appears.
2. Select PBC, and then press the v
button. The PBC pop-up appears.
3. Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4. The Connecting pop-up appears,
followed by the Connected pop-up. When
it closes, you should see the device listed
on the Wi-Fi Direct screen as connected.
Through the Player Using a PIN
1. Select the Wi-Fi Direct device you want
to connect to this player, and then press
the v button. The PBC/PIN pop up
appears.
2. Select PIN, and then press the v
button. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and
then enter it into the appropriate field
in the Wi-Fi Direct device you want to
connect.
4. The Connecting pop-up appears,
followed by the Connected pop-up.
When it closes, you should see the
device listed on the Wi-Fi Direct screen
as connected.
15
✎✎ NOTES
`` The current wired or wireless network
connection will be disconnected when you use
the Wi-Fi Direct function.
`` Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
Screen Mirroring
The Screen Mirroring function lets you view
the screen of your smart phone or android
tablet on the TV you have connected to the
Blu-ray player.
1. In the Home menu, press the ▲▼◄►
buttons to select Screen Mirroring, and
then press the v button. The Screen
Mirroring pop-up appears.
2. Launch DLNA Cast on your device.
3. On your device, find the name of the
Blu-ray player in the list of available
devices and then select it.
4. The TV will display a PIN. Enter the PIN
into your device.
5. The TV displays a connecting
message (for example, Connecting to
Android_92gb...) and then displays the
connected message.
6. In a few moments, the screen of your
device appears on the TV screen.
7. To stop Screen Mirroring, press the
EXIT or RETURN button on the remote
control, or disable Screen Mirroring
function of your smart phone.
16
✎✎ NOTES
`` You can connect to a device that supports
DLNA Cast. Note that connecting to such a
device may not be fully supported depending
on the manufacturer. For further information
on mobile connection support, refer to the
manufacturer’s web site.
`` When you are using the Screen Mirroring
function, video stuttering or audio dropouts
may occur, depending on your environment.
`` Bluetooth transmissions can interfere with
the Screen Mirroring signal. Before using
the Screen Mirroring function, we strongly
recommend that you turn off the Bluetooth
function on your smart phone or smart
device (tablet, etc.).
Device Name
Device Name function allows you to change
player's name by selecting from device name
list.
BD-Live Internet Connection
Set to allow or prohibit an Internet
connection when you use the BD-LIVE
service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is
allowed for any BD-LIVE content.
✎✎ NOTES
`` What is a valid certificate?
When the player uses BD-LIVE to send
the disc data and a request to the server
to certify the disc, the server uses the
transmitted data to check if the disc is valid
and sends the certificate back to the player.
`` The Internet connection may be restricted
while you are using BD-LIVE contents.
The DLNA Function
DLNA lets you play music, video, and photo
files located in your PC on the player.
To use DLNA with your player, you must
connect the player to your network.
(See page 13-16).
To use DLNA with your PC, you must install
DLNA software on your PC.
Using BD-LIVE™
Once the player is connected to the
network, you can enjoy various movierelated service contents using a BD-LIVE
compliant disc.
1. Attach a USB memory stick to the
USB jack on the front of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BDLIVE services.
2. Insert a Blu-ray Disc that supports BDLIVE.
3. Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
✎✎ NOTES
`` The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
System Settings
Setup
By using the Setup function, you can set
the language, Network Settings, etc.
For more information about the Setup
function, refer to the Setup section of this
user manual (See page 10).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎✎ NOTES
`` If this function is set to On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung
players that have the Anynet+ feature.
To operate this function, connect this player
to an Anynet+ Samsung TV with an HDMI
cable.
With Anynet+ on, you can operate this
player using a Samsung TV remote control
and start disc playback simply by pressing
the PLAY (
) button on the TV’s remote
control.
For more information, please see the TV
user manual.
✎✎ NOTES
`` This function is not available if the HDMI
cable does not support CEC.
`` If your Samsung TV has an Anynet+ logo,
then it supports the Anynet+ function.
`` Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
`` After the product was turned off,
disconnecting and connecting the power
cable turns it on automatically. At the
moment, it automatically turns off in about
15 seconds for re-establishing Anynet+
connection.
`` For some TV products, if connected to this
product with Anynet+ function, turning
the TV on may display a warning popup
message saying no connection was found.
Still, Anynet+ connection is properly
established and available to use.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray
disc that supports the BD-LIVE service and
stored on a flash drive.
You can check the device’s information
including the storage size, delete the BD
data, or change the Flash memory device.
✎✎ NOTES
`` In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
`` Your player supports the FAT16, FAT32, and
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
`` The Resume Play function may not work
after you format the storage device.
`` The total memory available to BD Data
Management may differ, depending on the
conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Language Settings
You can select the language you prefer for
the On-Screen menu, disc menu, audio, and
subtitles.
✎✎ NOTES
`` The selected language will only appear if it is
supported on the disc.
Security Settings
The default security PIN is 0000. Enter the
default PIN to access the security function if
you haven't created your own PIN. After you
have accessed the security function for the
first time, change the PIN using the Change
PIN function.
BD Parental Rating
Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.
DVD Parental Rating
This function works in conjunction with
DVDs that have been assigned an age
rating or numeric rating that indicates
the maturity level of the content. These
numbers help you control the types of
DVDs that your family can watch.
Select the rating level you want to set. For example, if you select Level 6, discs
rated above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature
content.
Change PIN
Change the 4-digit password used to
access security functions.
If you forget your password
1. Remove any discs.
2. Press and hold the ^ button on the front
panel for 5 seconds or more.
All settings will revert to the factory settings.
✎✎ NOTES
`` When the factory default settings are
restored, all the user stored BD data will be
deleted.
General Settings
Time Zone
Lets you specify the time zone that is
applicable to your area.
17
Support Settings
Software Upgrade
The Software Upgrade menu allows
you to upgrade the player’s software for
performance improvements or additional
services.
By Online
To upgrade By Online, follow these steps:
1. In the player’s menu, go to Settings >
Support > Software Upgrade.
2. Select By Online, and then press the
v button. The Connecting to Server
message appears.
3. A popup message will appear if an update
is available.
4. If you select Yes, download process
started. (Never turn the player on during
an upgrade.)
5. When the update is completed, the player
will restart automatically.
✎✎ NOTES
`` The upgrade is complete when the player
turns off, and then turns on again by itself.
`` Never turn the player off or back on manually
during the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused
by an unstable Internet connection or
consumer negligence during a software
upgrade.
`` No disc should be in the product when you
upgrade the software By Online.
18
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
6. In the player’s menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.
✎✎ NOTES
`` No disc should be in the product when you
upgrade the software using the USB Host
jack.
`` When the software upgrade is done, check
the software details in the software Upgrade
menu.
`` Do not turn off the player during the
software upgrade. It may cause the player to
malfunction.
`` Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on, follow
these steps:
1. Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup
message.
1. To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player on
or off manually during an upgrade.)
2. The update progress popup appears.
3. When the update is completed, the
player will restart automatically.
✎✎ NOTES
`` The upgrade is complete when the player
turns off, and then turns on again by itself.
`` Never turn the player off or on manually
during the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused
by an unstable Internet connection or
consumer negligence during software
upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and services.
Reset
Returns all settings to their factory defaults
except for the network settings.
Media Play
Method 2
Playing a Commercially Recorded
Disc
1. Press the 8 button to open the disc tray.
2. Place a disc gently into the disc tray with
the disc's label facing up.
3. Press the 8 button to close the disc tray.
Playback starts automatically.
Playing Files on a USB Device
There are two methods you can use to play or
view multimedia files located on a USB device
through your player.
Method 1
1. Turn the player on.
2. Connect the USB device to the USB port
on the front panel of the player. The New
Device Connected pop-up appears.
PLAY DISC
PHOTOS
VIDEOS
New device connected.
Photos
MUSIC
Music
> Move " Enter ' Return
App 1
App 2
App 3
App 4
App 5
Screen Mirroring Change Device
`` If the pop-up does not appear, go to Method 2.
3. Use the ▲▼ buttons to select Photos,
Videos or Music, and then press the
v button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
Settings
1. Turn the player on.
2. Connect the USB device to the USB port
on the front panel of the player. Select
Change Device and then press the ▲▼
button to select USB. Press the v
button.
PLAY DISC
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Photos, Videos &
Music screen and going to Step 3 in Method 2
below.
4. If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v
button.
5. Select a file to view or play, and then
press the v button.
7. Go to pages 20~22 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
PHOTOS
VIDEOS
MUSIC
Change Device
No Disc
a
No Disc
App 1
App 2
App 3
App 4
6. Press the RETURN button to exit a folder
or the EXIT button to return to Home
screen.
7. Go to pages 20~22 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
✎✎ NOTES
`` If you insert a disc when playing a USB
device, the device mode changes to "Disc"
automatically.
123
✎✎ NOTES
6. Press the RETURN button to exit a folder
or the EXIT button to return to the Home
screen.
123
Videos
No Disc
✎✎ NOTES
5. Use the ▲▼◄► buttons to select a file
to view or play, and then press the v
button.
App 5
More
Screen Mirr oring
Close
Change Device
Settings
3. Use the ▲▼◄► buttons to select
PHOTOS, VIDEOS or MUSIC on the
Home screen, and then press the v
button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
✎✎ NOTES
`` Even though the player will display folders
for all content types, it will only display files
of the Content Type you selected in Step
3. For example, if you selected music, you
will only be able to see music files. You
can change this selection by returning to
the Photos, Videos & Music screen and
repeating Step 3.
4. If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v
button.
Playing a Disc with User Recorded
Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc
tray with the disc’s label facing up, and
then close the tray.
2. Use the ◄► buttons to select the type
of content you want to view or play VIDEOS, PHOTOS, or MUSIC - and
then press the v button.
✎✎ NOTES
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 2. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 2.
19
3. A screen appears listing the contents
of the disc. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
4. If necessary, use the ▲▼◄► buttons
to select a folder, and then press the
v button.
5. Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
6. Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
7. Go to pages 20~22 for instructions
that explain how to control playback of
videos, music, and pictures on a disc.
Using DLNA
PC
Blu-ray Disc Player
Play back PC's
files
DLNA Connection
1. Connect the Blu-ray Disc Player, your PC,
and/or your DLNA compatible device to
the same wireless network.
2. Follow the directions in the DLNA
software Installation/Instruction manual
to set up devices and files for playing or
viewing.
3. Select Change Device on the player's
Home screen, and then press the v
button. In the list of DLNA connected
devices that appears, select your PC
or other DLNA compatible device, and
then press the v button.
4. Use the ◄► buttons to select the type
of content you want to view or play VIDEOS, PHOTOS, or MUSIC - and
then press the v button.
✎✎ NOTES
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 4. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 4.
5. A screen appears listing the contents
of the PC or DLNA device. Depending
on how the contents are arranged, you
will see either folders, individual files, or
both.
8. Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
9. Go to pages 20~22 for instructions
that explain how to control playback of
videos, music, and pictures on a disc.
Controlling Video Playback
You can control the playback of video
content located on a Blu-ray disc, DVD,
CD, USB device, or your computer.
Depending on the media, some of the
functions described in this manual may not
be available.
During Blu-ray or DVD disc playback, the
Full screen button does not operate.
Buttons on the Remote Control
used for Video Playback
2
1
AUDIO
Starts playback.
7 button
Pauses playback.
5 button
Fast Motion
Play
Slow Motion
Play
Step Motion
Play
HOME
SUBTITLE
Stops playback.
During playback, press the 3 or
4 button.
Each time you press the 3 or
4 button, the playback speed
will change.
In pause mode, press the 4
button.
Each time you press the 4
button, the playback speed will
change.
In pause mode, press the 7
button.
Each time you press the 7
button, a new frame appears.
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
Using the disc menu, title menu,
popup menu, and title list
BONUS
VIEW
20
6 button
Skip Motion
Play
6. If necessary, use the ▲▼◄► buttons
to select a folder, and then press the
v button.
7. Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
Playback related buttons
The player does not play sound in Search,
Slow or Step mode.
• To return to normal speed playback, press
the 6 button.
REPEAT
A-B
REPEAT
FULL
SCREEN
DISC MENU
button
During playback, press this button
to start the disc menu function.
POPUP MENU
button
During playback, press this button
to start the popup menu function.
TITLE MENU
button
During playback, press this button
to start the title menu function.
Controlling Music Playback
You can control the playback of music located
on a Blu-ray disc, DVD, CD, USB device, or
your computer.
Buttons on the Remote Control
used for Music Playback
Repeat an Audio CD (CD-DA)/
MP3
1. During Playlist playback, press the
TOOLS button.
TRACK 001
1
4
1
AUDIO
HOME
SUBTITLE
5
6
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
The selected track is played.
2
Skip : During playback, press the 1 or 2
button to move to the previous or next file of
the playlist.
3
5 button : Stops a track.
4
5
6
00:08 / 05:57
TRACK 004
TRACK 005
TRACK 006
2
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
Pause : Pauses a track.
1. To move to the Music List, press the 5
or RETURN button.
The Music List screen appears.
Music
1/6
CD
" Pause c Select
Off
(
) Track
(
(
) All
)Shuffle
Songs are played in the order
in which they were recorded.
The current song is repeated.
All songs are repeated.
Shuffle plays songs in random
order.
02:38
TRACK 006
TRACK 005
02:38
02:38
TRACK 008
TRACK 007
02:38
02:38
03:17
3. Press the v button.
TRACK 004
02:38
03:41
2. Press the ◄► buttons to select Track,
All, Shuffle, or Off.
02:38
TRACK 003
04:07
Tools ' Return
TRACK 002
02:38
04:27
03:35
1/2 Page
TRACK 001
TRACK 001
\05:57
> Move < Adjust ' Return
TRACK 003
+
3
Playlist
Tools
TRACK 001
Repeat Mode
? Off
Rip TRACK 002
Playlist
TRACK 010
TRACK 009
02:38
02:38
CD
a Change Device
c Select
Tools ( ) Jump to Page ' Return
2. Press the ▲▼◄► buttons to move
to a desired track, and then press the
YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select
additional tracks.
3. To remove a track from the list, move to
the track, and then press the YELLOW
(C) button again.
The check on the track is cancelled.
4. When done, press the v button.
The tracks you selected are displayed
on the right side of the screen. The
player plays the first track.
5. To change the play list, press the 5
button or RETURN button to return to
the Music List. Repeat Steps 2, 3, and 4.
6. To cancel the play list and return to the
Home screen, press the RETURN or EXIT
button.
✎✎ NOTES
`` You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
`` If you remove all the tracks from a play list and
then press the v button, the player lists and
plays all the tracks on the disc.
Ripping
Lets you copy audio files contents from an
Audio CD (CD-DA) to USB/HDD device.
1. Open the disc tray. Place the audio (CDDA) disc on the tray, and close the tray.
Insert a USB device into the USB jack on
the front of the product.
2. In Stop mode, press the ▲▼◄► buttons
to move to a desired track, and then press
the YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select additional
tracks.
3. To remove a track from the list, move to
the track, and then press the YELLOW (C)
button again.
The check on the track is cancelled.
4. When done, press the TOOLS button and
then select the Rip using the ▲▼ buttons.
and then press the v button. The Rip
pop-up appears.
6 button : Plays the currently selected
track.
21
5. Use the ▲▼ buttons to select the
device to store the ripped files, and then
press the v button.
✎✎ NOTES
`` Do not disconnect the device while ripping is
in progress.
6. If you want to cancel ripping, press the
v button and then select Yes. Select
No to continue ripping.
7. When ripping is complete, the "Ripping
completed." message appears. Press
the v button to go back to the
Playback screen.
✎✎ NOTES
`` This function may not be supported by some
discs.
`` On the Ripping screen, you can also choose
Select All and Deselect All.
-- Use Select All to select all tracks. This
cancels your individual track selections.
-- Use Deselect All to deselect all selected
tracks at once.
Disc Copy to USB
Lets you copy video/photo/music contents
from data Disc to USB/HDD device.
1. Open the disc tray. Place the data disc
on the tray, and close the tray. Insert a
USB device into the USB jack on the front
of the product. The new device pop-up
appears.
22
2. Press the ▲ button, and then press the
◄► buttons to select Blu-ray, DVD or
CD.
3. Use the ▲▼ buttons to select Photos,
Videos or Music, and then press the
v button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
✎✎ NOTES
`` Even though the player will display folders
for all content types, it will only display files
of the Content Type you selected in Step
3. For example, if you selected music, you
will only be able to see music files. You
can change this selection by returning to
the Photos, Videos & Music screen and
repeating Step 3.
4. In Stop mode, use the ▲▼◄► buttons
to select the VIDEOS, PHOTOS, or
MUSIC, and then press the YELLOW
(C) button. A check appears to the left
of the desired item.
5. Repeat Step 4 to select and check
additional desired item.
6. To remove the desired item from the list,
press the YELLOW (C) again.
The check on the desired item is
removed.
7. When done, press the TOOLS button
and then select the Copy to USB using
the ▲▼ buttons. and then press the
v button. The Copy to USB pop-up
appears.
8. Use the ▲▼ buttons to select the
device to store the copied files, and
then press the v button.
✎✎ NOTES
`` Do not disconnect the device while copying
is in progress.
9. If you want to cancel copying, press the
v button and then select Yes. Select
No to continue copying.
10.When copying is complete, the
"Copying completed." message
appears. Press the v button to go
back to the Playback screen.
✎✎ NOTES
`` This function may not be supported by some
discs.
`` On the Copying screen, you can also choose
Select All and Deselect All.
-- Use Select All to select all item. This
cancels your individual item selections.
-- Use Deselect all to deselect all selected
item at once.
Playing Photo Contents
You can control the playback of photo content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
Using the Tools Menu
During playback, press the TOOLS button.
Start Slide Show/ Select to start or stop the slide
Stop Slide Show show.
Slide Show Speed Select to set a slide show's speed.
Background
Music
Select to listen to music while
viewing a slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
Information
Shows the picture information.
✎✎ NOTES
`` Depending on the disc or storage device, the
Tools menu may differ.
`` To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
`` You can't enlarge the subtitle and PG graphic
in the full screen mode.
Appendix
PROBLEM
Troubleshooting
Forgot password
• Press the ^ button (on the front panel) for more than 5 seconds with no
disc inside. All settings including the password will revert to the factory
settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input
resolutions.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
• Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorised service centre.
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be
performed with the remote
control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 6.1m from the
player.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
• You’ve requested a title or chapter number or search time that is out of range.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank.
• If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
• Press the ^ button (on the front panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
SOLUTION
DLNA function
I can see folders shared
through DLNA, but I cannot
see the files.
• DLNA shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not
displayed.
Video is played intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is
overloaded.
• The wireless connection between the DLNA compatible device and the
player is unstable.
Check the connection.
DLNA connection between
Player and PC is unstable.
• The IP address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
23
PROBLEM
SOLUTION
I cannot connect to the BDLIVE server.
• Check whether the network connection is working or not by using the
Network Status menu.
• Check whether the USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
• If all above fails, contact the contents provider or update the player to the
latest firmware.
BD-LIVE
When using the BD-LIVE
service, an error occurs.
✎✎ NOTES
Specifications
General
USB
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
HDMI
`` When the factory default settings are restored, all stored user BD data is deleted.
Audio Output
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the
product.
Network
2. You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
24
-----
Weight
1.0 Kg
Dimensions
290 (W) X 221 (D) X 39 (H) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Type A
USB 2.0
DC output
5V 0.5A Max.
Video
2D : 1080p, 1080i, 720p, 480p
3D : 1080p, 720p
Audio
PCM, Bitstream
Digital Audio Output
Coaxial
Ethernet
100BASE - TX Terminal
Wireless LAN
Built-In
Security
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC)
Supported
Network speeds equal to or below 10Mbps are not supported.
Design and specifications are subject to change without prior notice.
For the power supply and power consumption, refer to the label attached to the player.
Weight and dimensions are approximate.
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
• Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Bluray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-- some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or
the manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care centre.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
• For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
• Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the
DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of
AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care centre.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibited use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com.
To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego CA, 92138,
USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is
prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may not
use any content or services in a manner that has not been authorised by the content owner or
service provider. Without limiting the foregoing, unless expressly authorised by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
Licence
• Manufactured under licence from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
• For DTS patents, see http://patents.dts.com. Manufactured under licence
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+Digital Out is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
2.0+Digital Out
• DivX
-- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,
LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®
device that has passed rigorous testing to verify that it plays DivX video.
Visit divx.com for more information and software tools to convert your files into DivX
videos.
-- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners.
• Open Source Licence Notice
-- In the case of using open source software, Open Source Licences are available on the
product menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
• DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
EGYPT
ALGERIA
PAKISTAN
Contact Centre 
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 - Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and
Mobile]
02-4222111 [Other landline]
1800-SAMSUNG(726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678) Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp/support
www.samsung.com/my/support
www.samsung.com/ph/support
www.samsung.com/sg/support
www.samsung.com/th/support
www.samsung.com/tw/support
www.samsung.com/vn/support
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/eg/support
www.samsung.com/n_africa/support
www.samsung.com/pk/support
TUNISIA
Area
JORDAN
SYRIA
IRAN
MOROCCO
SAUDI ARABIA
TURKEY
` Africa
NIGERIA
Ghana
Cote D’ Ivoire
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
Contact Centre 
80-1000-12 0800-22273
06 5777444
18252273
021-8255
080 100 2255
920021230
444 77 11
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095-0077
0800 545 545
0800 300 300
0685 88 99 00
9999
200
499999
1969
0860 SAMSUNG (726 7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/n_africa/support
www.samsung.com/Levant/support (English)
www.samsung.com/Levant/support (English)
www.samsung.com/iran/support
www.samsung.com/n_africa/support
www.samsung.com/sa/support
www.samsung.com/sa_en/support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr/support
www.samsung.com/support
www.samsung.com/support
BD-J5900
Blu-ray™ 光碟播放機
使用手冊
用影像記錄一切可能
感謝您選購此款 Samsung 產品。
為了獲得更完善的服務,
請在以下網站註冊您的產品
www.samsung.com/register
台灣中文
• 插入電源插頭時,請確保它已穩妥插
入。從牆上插座拔下電源插頭時,要捏
住電源插頭將其拔 出。不要拉電源線
來拔出電源插頭。切勿用濕手觸摸電源
線。
安全資訊
警告
注意
有觸電的風險,請勿開啟
注意:為減少觸電的危險,請勿卸下機蓋(或後
蓋)。內部沒有使用者可以自行維修的部件。請向
合格的維修人員尋求所有維修幫助。
• 外殼及背面或底部的插槽和開口,用於進
行必要 的通風。為了確保本裝置的操作可
靠,以及為了 避免它過熱,不要阻擋或遮
蓋這些插槽和開口。
-- 除非能夠提供適宜的通風,否則不要將本
裝 置放置在狹窄的空間中(例如書櫃或入
牆式櫥 櫃)。
-- 不要將本裝置放置在散熱器或加熱器附近
或上 方,也不要將它放置在陽光直射到的
位置。
-- 不要將盛水的容器(花瓶等)放置在本裝
置 上。濺出的水可能引發火災或導致觸
電。
• 不要讓本裝置受雨淋或將它放置在水邊
(浴缸、洗臉盆、廚房洗滌池或洗衣盆
附近、潮濕的地下 室中或游泳池附近等
等)。如果本裝置不慎變 濕,請立即拔下
電源插頭並與授權經銷商聯絡。
• 本裝置使用電池。您所在的社區中,可能
有環境 法規要求您正確棄置電池。請與您
當地的民政局 聯絡,取得棄置或回收資
訊。
此符號表示內部有高電壓。透過
任何形式 接觸本產品內部的任何
部件都很危險。
此符號表示本產品隨附有關操作
和維護的 重要資料。
• 不要使牆上插座、延長線或轉接器的負載
超出其 容量,因為這可能會引發火災或導
致觸電。.
• 巧妙佈置電源線,使得它們不會被踩踏或
被放置 於其上的物品壓到。尤其要注意插
頭端子處、牆 上插座處以及從裝置中引出
處的電線。
• 為了保護本裝置免受雷暴襲擊,或者當長
時間無 人看管或不使用本裝置時,請從牆
上插座拔下電 源插頭,並斷開天線或纜線
系統的連接。這麼做 可以防止閃電和電源
線浪湧損傷裝置。
• 在將交流電源線連接至直流電源轉接器插
座之 前,請確保直流電源轉接器的電壓額
定值與當地 的電源相對應。
• 不要將任何金屬物品插入本裝置的有縫隙
的部件中。此行為會造成觸電的危險。
• 為了避免觸電,不要觸摸本裝置的內部。
只有有 資格的技術人員才能打開本裝置。
• 如果本裝置工作不正常(尤其是它發出
異常的聲 音或異味時),請立即拔下電
源插頭並與授權經 銷商或服務中心聯
絡。
•外殼維護。
- 在將其他元件連接到本產品前,請確保
將它們 關閉。
- 如果您突然將產品從很冷的地方搬到很
暖 和的地方,則可能會在操作部件和
鏡 頭上 產生冷凝,從而導致光碟播放
異 常。如果發生這種情況,請拔下產
品的電源插頭,等待兩個小時,然後再
將插頭連接至電源插座。然後再次插入
光碟並嘗試播放。
• 如果將會有很長一段時間不使用產品,
或您要出門較長時間,請從電源插座拔
下產品的電源插頭 (尤其是兒童、老人或
行動不便的人將獨自留在家中時)。
-- 堆積的灰塵會使得電源線冒火花、發
熱或絕緣效能下降,從而可能導致觸
電、漏電或引發火災。
• 如果您要將產品安裝在灰塵大、溫度高
或低、有 化學物質的位置或要它全天候
工作的場所(例如機場、火車站等),
請與授權服務中心聯絡,瞭解相關資
訊。如果不瞭解清楚便安裝產品,可能
導致產品嚴重損壞。
• 僅使用恰當接地的插頭和牆上插座。
2
- 接地不當可能導致觸電或裝置損壞。(僅
限 l 類裝置。)
• 若要徹底關閉本裝置,必須從牆上插座拔
下它的 電源插頭。因此,牆上插座和電源
插頭始終要方便拔插。
• 不要讓兒童靠在產品上。
• 請將配件(電池等)存放在兒童無法觸及
的安全 位置。
• 不要將產品安裝在不平穩的位置,例如搖
搖晃晃 的架子、傾斜的地板或會震動的位
置。
• 不要讓產品掉到地上,也不要敲擊產品。
如果產 品損壞,請拔下電源插頭並與服務
中心聯絡。
• 若要清潔本裝置,請從牆上插座拔下電源
插頭,然後用乾燥的柔布擦拭產品。不要
使用任何化學品,例如蠟、苯、酒精、稀
釋劑、殺蟲劑、空氣清新劑、潤滑劑或洗
滌劑。這些化學品可能會損傷產品外觀或
擦除產品表面印刷的內容。
• 本裝置不可遭受水滴或濺到水。不要在
裝置上放 置任何盛滿水的物體(例如花
瓶)。
• 不要將電池丟入火中。
• 不要將多個電子裝置插入到同一個墻上插
座中。插座過載會導致它過熱,從而引發
火災。
• 如果用錯誤的電池類型更換遙控器中所用
的電池,則有爆炸的危險。只能換成相同
或相等類型的電池。
• 警告 - 為了避免火勢蔓延,
始終要使蠟燭和其他有明火
的物品遠離產品。
• 警告 - 本產品含有加州認為會致癌和生殖
毒性的化學品 。
1 類雷射產品
本光碟播放機屬於 1 類雷射產品。如果不使
用本手冊中規定的控制、調校或執行程序進
行操作,可能 會讓人受到有害的輻射。
注意 :
• 本產品使用看不見的雷射光線,如果受到
其直射,可能會導致危險的輻射曝露。一
定要 按照說 明正確操作產品。
• 本產品利用雷射。如果不使用本手冊中規
定的控 制、調校或執行程序進行操作,可
能會讓人受到 有害的輻射。請勿打開機蓋
和自行維修。請向合 格的維修人員尋求維
修幫助。如果使用有護套的線纜和接頭將
本產品連接至其 他裝置,則本產品符合
CE 法規。為了防止收音機 和電視等電子
裝置的電磁干擾,請使用有護套的 線纜和
接頭進行連接。
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
✎✎ 附註
`` 如果 Blu-ray 光碟/DVD 的地區號碼與本
產品的地區 號碼不同,產品將無法播放
該光碟。
重要說明
本裝置上的電源插頭是含有保險絲的模製插
頭。保險絲的值在插頭的插腳面標出。
如果保險絲需要更換,可以使用獲得 BS1362
認可的相同額定值保險絲。
如果保險絲護蓋可拆除,切勿在拆下護蓋的
情況下使用插頭。如果需要更換保險絲護
蓋,換用品顏色必須與插頭插腳面的顏色相
同。更換護蓋可向代理商購買。
如果隨附的插頭不適合您家中的電源插座,
或者如
果線纜不夠長,無法插入到電源插座中,則
您應該取得獲得安全認可的合適延長線,或
者諮詢代理商以獲得幫助。
不過,如果除了剪斷插頭之外別無它法,請
先取出保險絲,再安全地處置插頭。切勿將
插頭連接到電源插孔,因為裸露的彈性線會
帶來觸電的危險。
要斷開裝置與電源插座的連接,必須從電源
插座中拔出插頭,因此,插頭應方便操作。
隨附本使用手冊的產品裝置獲得特定協力廠
商的特定智慧財產權授權。
預防措施
重要安全說明
在使用裝置之前,請仔細閱讀操作說
明。 請依照下面列出的所有安全說明
操作。
將這些操作說明放在就手的地方,以
供以後參考。
1. 閱讀這些說明。
2. 遵守這些說明。
3. 注意所有警告資訊。
4. 按照所有說明進行操作。
11. 僅使用製造商指定的連接件/配件。
12. 只能放在製造商指定
的手推車、座台、
三角架、支架或桌子
上,或者帶裝置一起
出售。 如果使用手
推車,移動手推車/
裝置組合時要格外小心,避免翻倒損壞。
13. 在雷暴期間或長期不使用時,請拔下此
裝置。
14. 請向合格的維修人員尋求所有維修幫
助。 當裝置遭到任何方式的損壞時就
需要進行維修,如電源線或插頭損壞、
灑水或異物跌入裝置、裝置被雨淋或受
潮、裝置不能正常工作或裝置被摔到地上。
5. 切勿在靠近水的地方使用本装置。
6. 乾布進行清潔。
7. 切勿擋住任何通風口。 應按照製造商說
明進行安裝。
8. 不要安裝在散熱器、加熱器、爐子或散
熱的其他裝置(包括 AV 接收器)等熱
源附近。
9. 切勿輕視極化插頭或接地式插頭的安全
用途。 極化插頭帶有寬窄兩個插腳。 接
地式插頭帶有兩個插腳和第三個接地針
腳。 寬插腳和第三個針腳均用於安全用
途。 當提供的插頭不能插入您的電源插
座時,請找電氣技師換一個新的插座。
10. 電源線不可踩踏或擠壓,特別是在插
頭、連接插座及設備的出口位置。
3
使用 3D 功能
3D 畫面的重要健康及安全資訊。
在使用 3D 功能之前,請閱讀並瞭解下列安
全資訊。
• 在觀看 3D 電視時,一些觀看者可能會覺
得不舒服,例如頭暈、噁心和頭痛。
如果您有任何此類症狀,請停止觀看 3D
電視,取下 3D 主動式眼鏡並休息。
• 長時間觀看 3D 影像會引起眼睛疲勞。如
果您覺得眼睛疲勞,請停止觀看 3D 電
視,取下 3D 主動式眼鏡並休息。
• 負責任的成年人應該檢查使用 3D 功能的
兒童。
如果兒童報告眼睛疲勞、頭痛、頭暈或噁
心,請讓兒童停止觀看 3D 電視並休息。
• 不要將 3D 主動式眼鏡用於其他用途(例
如普通眼鏡、太陽鏡、護目鏡等)
• 走路或走來走去時,不要使用 3D 功能或
3D 主動式眼鏡。如果在走來走去時使用
3D 功能或 3D 主動式眼鏡,則可能會導致
您撞上物件、絆倒或摔倒,從而導致嚴重
的人身傷害。
• 如果要欣賞 3D 內容,請使用高速 HDMI
纜線將 3D 裝置(3D 相容 AV 接收器或電
視)連接到播放機的 HDMI OUT 埠。先戴
上 3D 眼鏡再播放 3D 內容。
4
• 播放機只能透過連接至 HDMI OUT 埠的
HDMI 電纜來輸出 3D 訊號。
• 因為在 3D 播放模式中,視訊解像度是根
據原始 3D 視訊固定的,所以無法將解像
度變更為您偏好的解像度。
• 在 3D 播放模式中,一些功能(例如 BD
Wise、設定螢幕尺寸或解像度)可能無法
操作。
• 必須使用高速 HDMI 電纜才能正確輸出
3D 訊號。
• 觀看 3D 影像時,請在距離電視 3 倍於螢
幕寬度的地方觀看。 例如,如果您擁有
46 英吋螢幕,請在離螢幕 138 英吋(11.5
英呎)處觀看。
• 請將 3D 視訊螢幕放在與眼睛同高的位
置,以取得最佳的 3D 畫面。
• 如果將播放機連接到一些 3D 裝置,3D 效
果可能無法正常起作用。
• 本播放機不會 2D 內容轉換為 3D。
• "Blu-ray 3D" 和 "Blu-ray 3D" 標誌是 Bluray Disc Association 的商標。
內容
安全資訊
警告............................................................... 2
預防措施...................................................... 3
使用 3D 功能.............................................. 4
入門指南
在使用本使用者手冊之前........................ 5
本播放機可以播放的光碟標誌............... 5
配件............................................................... 7
前面板.......................................................... 7
後面板.......................................................... 7
遙控器.......................................................... 8
連接
連接到電視.................................................. 8
連接到音訊系統......................................... 9
連接到網路路由器..................................... 9
設定
設定程序....................................................10
功能表導覽................................................10
存取設定功能表.......................................11
圖像.............................................................11
音頻.............................................................12
網絡.............................................................13
系統.............................................................16
語言.............................................................17
安全性........................................................17
一般.............................................................17
支援.............................................................18
媒體播放
播放商業錄製的光碟..............................19
播放 USB 裝置上的檔案........................19
播放具有使用者錄製的內容的光碟....19
使用 DLNA.................................................20
控制視訊播放...........................................20
控制音樂播放...........................................21
播放相片內容...........................................22
附錄
故障排除....................................................23
規格.............................................................24
入門指南
區域代碼
在使用本使用者手冊之前
本播放機可以播放的光碟類型和內容
播放機和光碟都按照地區進行編碼。
這些區域代碼必須相匹配才能播放光碟。 如
果這些區域代碼不匹配,則不能播放光碟。
本播放機的區域代碼在播放機的後面板上顯示。
光碟類型
媒體
視訊
音樂
相片
光碟類型
Blu-ray 光碟
3D Blu-ray 光碟
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R、
DVD-RW/-R、
BD-RE/-R
CD-RW/-R、
DVD-RW/-R、
BD-RE/-R
詳細資料
以 BD-RE 格式錄製的 BD-ROM 或 BD-RE/-R。
DVD-VIDEO、已錄製然後最終化的已錄製 DVD+RW/
DVD-RW(V)/DVD-R/+R,或者包含 DivX、MKV、
MP4 內容的 USB 儲存媒體。
Blu-ray
光碟
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 儲存
媒體上錄製的包含 JPEG 內容的音樂。
✎✎ 附註
`` 由於光碟類型或錄製條件的原因,本播放機可能不能播放某些 CD-RW/-R 和 DVD-R 光碟。
`` 如果 DVD-RW/-R 未以 DVD 視訊格式正確錄製,它將不可播放。
`` 本播放機不能播放 DVD-R 上以超過 10 Mbps 的位元速率錄製的內容。
`` 一些類型的光碟片可能無法播放,或者在使用特定功能時(例如執行角度變更和縱橫
比調整時)無法播放。關於光碟的資訊已在光碟盒上詳細寫明。請在需要時參閱此資訊。
`` 播放 BD-J 標題時,與普通標題相比,加載時間可能稍長一些,可能某些功能執行起來
很慢。
本播放機無法播放的光碟類型
• HD DVD
• DVD-ROM/PD/
MV 光碟等
• DVD-RAM
• 超級音訊 CD
(CD 層除外)
• DVD-RW(VR 模式)
• 用於編寫的 3.9 GB
DVD-R。
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-G 只能播放音訊,
不能播放視訊。)
區域代碼
地區
A
北美洲、中美洲、
南美洲、韓國、日
本、台灣、香港和
東南亞。
B
歐洲、格陵蘭、
法國各地區、中
東、非洲、澳大
利亞和紐西蘭。
C
在 CD-RW/-R、DVD-RW/-R、BD-RE/-R 或 USB 儲存
媒體上錄製的包含 MP3 或 WMA 內容的音樂。
`` 本播放機不能播放 BD-R 或 USB 裝置上以超過 25 Mbps 的位元速率錄製的內容。
本播放機可以播放的光碟標誌
DVDVIDEO
印度、中國、俄羅
斯、中亞和南亞。
1
美國、美國領土
和加拿大
2
歐洲、日本、中
東、埃及、南
非、格陵蘭
3
台灣、韓國、菲律
賓、印尼、香港
4
墨西哥、南美
洲、中美洲、
澳大利亞、新西
蘭、太平洋群
島、加勒比
5
俄羅斯、東歐、
印度、非洲大部
分地區、朝鲜、
蒙古
6
中國
Blu-ray 光碟
BD-LIVE
3D Blu-ray 光碟
DivX
美國、加拿大、韓國、
日本的 NTSC 廣播系統
支援的檔案格式
USB 連線注意事項
• 本播放機支援 USB 儲存媒體、MP3 播放
器、數位相機、USB 讀卡器。
• 本播放機不支援長度超過 128 個字元的資
料夾或檔案名稱。
• 某些 USB/外接式 HDD/數碼相機裝置可能
與本播放機不相容。
• 本播放機支援 FAT16、FAT32 和 NTFS 檔
案系統。
• 將 USB 裝置直接連接到播放機的 USB
埠。透過 USB 電纜線連接可能會導致相容
性問題。
• 如果將多個記憶體裝置插入多卡讀卡器
中,則可能會導致讀卡器無法正常操作。
• 本播放機不支援 PTP 通訊協定。
5
• 在「載入」過程中不要斷開 USB 裝置連接。
• 影像解像度越高,顯示影像所需的時間越長。
• 本播放機不能播放從商業網站下載的帶有 DRM (Digital Rights Management) 的 MP3 檔案。
• 本播放機僅支援 30fps(每秒幀數)的視訊。
• 本播放機僅支援 USB 大量儲存裝置類別 (MSC) 裝置,例如隨身碟和 USB HDD。(不支援 HUB。)
• 某些 USB HDD 裝置、多卡讀卡器及隨身碟可能與本播放機不相容。
• 如果某 USB 裝置需要過多功率,則它可能會受到電路安全裝置的限制。
• 如果從 USB HDD 播放不穩定,請透過將 HDD 插入到墻上插座來提供額外的電源。如果
問題仍然存在,請與 USB HDD 製造廠商聯絡。
• 對於任何資料檔案損壞或資料遺失,SAMSUNG 不承擔任何責任。
• 本播放機不支援 NTSF 壓縮檔案、備用檔案或加密的檔案。
• 可以在桌上型電腦上修復或格式化 USB 裝置。(僅限 MS-Windows 作業系統)
ƒƒ 限制
-- 即使檔案由上方提到的受支援轉碼器編碼,如果其內容有問題,則該檔案也可能無法播放。
-- 如果檔案的容器資訊錯誤或檔案本身損毀,則不能保證可以正常播放。
-- 位元速率/幀速率高於標準的檔案在進行聲音/視訊播放時可能會斷斷續續。
-- 如果檔案的索引表格損壞,搜尋 (跳過) 功能便無法使用。
-- 視國家/地區而定,RMVB 格式可能不受支援。
ƒƒ 視訊解碼器
-- 最高支援 H.264 Level 4.1和 AVCHD
-- 不支援 H.264 FMO/ASO/RS、VC1 SP/MP/AP L4
-- MPEG4 SP 和 ASP:
低於 1280 x 720: 最高 60 幀
高於 1280 x 720: 最高 30 幀
-- 不支援 GMC 2 或更高版本
視訊檔案支援
副檔名
*.avi
容器
AVI
視訊轉碼器
音頻轉碼器
DivX 3.11/4/5/6
MP3
Dolby Digital
DTS
WMA
PCM
MP4v3
H.264 BP/MP/HP
6
*.mkv
MKV
*.wmv
WMV (wmv9)
*.mp4
MP4
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
*.mpg
*.mpeg
MPEG
*.rmvb
RMVB
MPEG2
H.264 BP/MP/HP
RV8/9/10
(RV30/40)
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
RealAudio 6
解析度
ƒƒ 音訊解碼器
-- 支援 WMA 7、8、9 和 STD
-- 不支援 22050Hz 單聲道的 WMA 取樣率
-- AAC: 最高取樣率: 96Khz(8、11、12、16、22、24、32、44.1、48、64、88.2、
96) 最高位元速率: 320kbps。
1920x1080
1920x1080
„„
受支援的 DivX 字幕檔案格式
1920x1080
*.ttxt、*.smi、*.srt、*.sub、*.txt
1920x1080
✎✎ 附註
1920x1080
`` 些 DivX、MKV 和 MP4 格式的光碟可能不能播放,具體視視訊解像度和幀速率而定。
1920x1080
音樂檔案支援
1920x1080
副檔名
容器
音頻轉碼器
1920x1080
*.mp3
MP3
MP3
1920x1080
1920x1080
-
* 取樣率 (kHz) - 8、11、16、22、
1920x1080
1920x1080
支援範圍
*.wma
WMA
WMA
32、44.1 和 48
*位
元速率 - 在 5kbps 到 355kbps 範 圍內的
所有位元速率
前面板
圖片檔案支援
副檔名
類型
解析度
*.jpg
*.jpeg
*.jpe
JPEG
15360x8640
*.png
PNG
15360x8640
遙控器感應器
電源按鈕
AVCHD(先進視訊轉碼器高解像度)
• 本播放機可以播放 AVCHD 格式的光碟。
這些光碟一般在攝錄放影機中錄製和使用。
• AVCHD 格式是高解像度數位視訊相機格式。
• MPEG-4 AVC/H.264 格式以高於常見影像壓縮格式效率高的效率壓縮影像。
• 部分 AVCHD 光碟片使用 "x.v.Color" 格式。 本播放機可以播放使用 "x.v.Color" 格式的
AVCHD 光碟。
• "x.v.Color" 是 Sony Corporation 的商標。
• "AVCHD" 和 AVCHD 標誌是 Matsushita Electronic Industrial Co., Ltd. 和 Sony
Corporation 的商標。
USB HOST
光碟托盤
打開/關閉按鈕
✎✎ 附註
`` 使用 USB Host 插孔進行軟件升級只能使用 USB 快閃記憶棒進行。
`` 請開啟並拉出 USB 蓋,再插入 USB 裝置。
後面板
✎✎ 附註
`` 一些 AVCHD 格式光碟可能不能播放,具體視錄製條件而定。
AVCHD 格式的光碟需要最終化。
`` "x.v.Color" 提供的色彩範圍比一般 DVD 攝錄放影機光碟片的色彩範圍廣。
配件
請檢查下列隨附的配件。
HDMI OUT
AUDIO
BONUS
VIEW
HDMI 電纜
用於遙控器的電池
(AAA 號)
使用手冊
HOME
REPEAT
A-B
REPEAT
LAN
DIGITAL AUDIO OUT
SUBTITLE
FULL
SCREEN
遙控器
7
連接
遙控器
遙控器功能描述
連接到電視
打開和關閉播放機。
彈出光碟。
打開和關閉電視。
將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到電視的 HDMI IN 插孔。
設定完成後,您就可以在電視上設定輸
入源。
電視音量調節
-- 在連接好所有接線之前,不要將電源線連接至牆上插座。
-- 當您變更連線時,請先關閉所有裝置再開始。
按數字按鈕以操作選項。
用來進入快顯功能表/標題功能表。
使用此按鈕以進入光碟功能表。
按此按鈕以向後或向前搜尋光碟。
按此按鈕以向後或向前跳過。
按此按鈕以停止光碟。
按此按鈕以移至主功能表。
AUDIO
HOME
SUBTITLE
按此按鈕以暫停光碟。
按此按鈕以移至主功能表
使用此按鈕存取光碟 (Blu-ray 光碟/DVD)
上的不同音頻功能。
按此按鈕以切換 Blu-ray 光碟/DVD 的字
幕語言。
按此按鈕以使用「Tools(工具)」功能表。
用來在播放 Blu-ray/DVD 光碟取期間顯
示播放資訊。
音訊
視訊
用來選取功能表項目並變更功能表值。
按此按鈕以結束功能表。
返回前一個功能表。
這些按鈕同時用於播放機的功能表和多個
Blu-ray 光碟功能。
按此按鈕以使用 Bonusview 功能。
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
按此按鈕以使用全螢幕功能。
在 Blu-ray 光碟/DVD 播放期間,此按
鈕不起作用。
允許您重複播放某一標題、章節、曲目或
光碟。
重複播放A-B片段
✎✎ 附註
`` 如果使用 HDMI 至 DVI 電纜來連接到顯示裝置,則您還必須將播放機上的 Digital
Audio Out 連接至音訊系統才能聽到音訊。
`` HDMI 電纜輸出數位視訊和音訊,因此不需要連接音訊電纜。
`` 視您的電視而定,某些 HDMI 輸出解像度可能不起作用。請參閱電視的使用手冊。
安裝電池
!
✎附註
`` 如果遙控器不能正常工作:
8
• 請檢查電池的極性 (+/– )是否安裝正確。
• 請檢查電池是否耗盡。
• 請檢查遙控器感應器是否被異物阻擋。
• 請檢查產品附近是否有熒光干擾。
注意
`` 請按照當地的環境法規處理電池。 不要將它
們與家庭垃圾放在一起。
`` 切勿讓電池接觸到火。
`` 切勿使電池短路、過熱或拆解電池。
`` 若未正確更換電池,可能會有爆炸的危險。
請務必更換相同或同等類型的電池。
`` 當使用 HDMI 電纜將播放機連接至電視或新電視,然後第一次開啟電視時,播放機會
自動將 HDMI 輸出解像度設定為電視支援的最高解像度。
`` HDMI 電纜線很長可能會導致螢幕雜訊。 如果出現這種情況,請將「HDMI 深色」設定為「關閉」。
`` 若要以 HDMI 720p、1080i 或 1080p 輸出模式觀看視訊,則必須使用高速 HDMI 電纜。
`` HDMI 僅將純數位訊號輸出到電視。
如果電視不支援 HDCP(高頻寬數位內容保護),畫面上將出現雪花噪訊。
連接到音訊系統
連接到網路路由器
您可以使用下面說明的其中一種方法,將 Blu-ray 播放機連接到音訊系統。
-- 在連接好所有接線之前,不要將電源線連接至牆上插座。
-- 當您變更連線時,請先關閉所有裝置再開始。
您可以使用下面說明的其中一種方法,將本產品連 接到網路路由器。
若要使用 DLNA 網路功能,必須將電腦連接連接至網路,如圖示中所示。
連線可以是有線或無線。
方法 1 連接至 HDMI 相容 AV 接收器
有線網路
• 將 HDMI 電纜從產品背面的 HDMI OUT 插孔連接到接收器的 HDMI IN 插孔。
• 最佳品質(建議)
方法 2 使用數位同軸電纜連接至 AV 接收器
寬頻數據機
(含有整合式路由器)
• 使用同軸電纜(未包括),將產品上的「同軸數位音訊輸出」插孔連接到接收器的「數位
同軸輸入」插孔。
• 一般品質
• 當「數位輸出」設為 PCM 時,僅可從前面揚聲器聽到聲音。
寬頻服務
或
路由器
方法 1
方法 2
音訊
音訊
寬頻服務
寬頻數據機
✎✎ 附註
`` 可能不允許對 Samsung 的軟體更新伺服器進行網際網路,具體視您使用的路由器或
ISP 的政策而定。如需詳細資訊,請與 ISP (網際網路服務提供者) 聯絡。
`` 對於 DSL 使用者,請使用路由器建立網路連線。
9
無線網絡
設定
設定程序
無線路由器
寬頻服務
✎✎ 附註
`` 如果無線 IP 路由器支援 DHCP,本產品可以使用 DHCP 或靜態 IP 地址連線到無線網
絡。.
`` 將無線 IP 路由器設定為 Infrastructure (基礎架構) 模式。不支援 Ad-hoc (專用) 模式。
`` 本產品僅支援下列無線安全金鑰通訊協定:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
`` 選擇目前未使用的無線 IP 路由器上的通道。如果為無線 IP 路由器設定的通道正為附
近其他裝置所用,將會產生干擾和通訊故障。.
`` 遵照最新的 Wi-Fi 認證規格,三星家庭影院不支援在 802.11n 模式下執行的網絡中使
用 WEP、TKIP 或 TKIP-AES (WPS2 混合) 安全加密。
`` 無線 LAN 本身可能會引起干擾,具體取決於操作條件 (AP 效能、距離、障礙、其他無
線電裝置的干擾等)。
• 如果未配置設定,則主功能表不會出
現。
• 升級軟體版本後,本播放機中的 OSD
螢幕顯示)可能會變更。
• 存取步驟可能會因選定的功能表而異。
• 設定程序完成之後,您就可以操控面板
按鈕和遙控器了。
在將播放機連接至電視之後,開啟電視和播
放機。 第一次開啟播放機時,播放機的「設
定」畫面會出現在電視上。 「設定」程序可
讓您設定螢幕顯示 (OSD) 和功能表語言、畫
面比例(螢幕尺寸)、網路類型以及將播放
機連接至網路。
✎✎ 附註
`` 如果您要使用 Anynet+(HDMI-CEC)
功能,請依照下面的說明操作。
1) 使用 HDMI 電纜線將播放機連接
至 Anynet+(HDMI-CEC) 相容
Samsung 電視。
2) 在電視和播放機上將 Anynet+(HDMICEC) 功能設定為「開」。
3) 將電視設定為「設定程序」。
`` 鐘沒有使用,屏幕保護程序將出現在
電視上。 如果播放機停留在屏幕保護
程序模式超過 25 分鐘,電源會自動
關閉。
功能表導覽
AUDIO
SUBTITLE
1
`` 如果您不按照下面說明來進行設定,
則主功能表不會出現。
`` 如果在網路設置期間按下 藍色 (D) 按
鈕,則可以存取主功能表,即使網路
設置尚未完成也是如此。
`` 返回起始選單時,將自動取消全螢
幕模式。
`` 如果您想要再次顯示「設定」畫面變
更設定,請在產品內部無光碟的情況
下,按播放機前面板上的 ^ 按鈕 5 秒
鐘以上。這會將播放機重設為其預設
設定。
`` 設定程序完成之後,您就可以操控
HDMI-CEC 功能了。
3
2
4
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
1
HOME 按鈕: 按此按鈕以移至主
功能表。
2
RETURN 按鈕: 返回前一個功能表。
v (確認)/方向按鈕:
3
4
10
HOME
移動游標或選取項目。
啟動目前選定的項目。
確認設定。
EXIT 按鈕: 按此按鈕以結束功能表。
2. 按 ▲▼◄► 按鈕選取 設定,然後按 v
按鈕。
• 主功能表
6
播放光碟
相片
視頻
音樂
7
1 3. 按下 ▲▼ 按鈕以選取所需的子功能表,
然後按 v 按鈕。
4. 按下 ▲▼ 按鈕以選取所需的項目,然後
2
按 v 按鈕。
5. 按 EXIT 按鈕結束功能表。
沒有光碟
8
App 1
1
App 2
App 3
App 4
App 5
Screen Mirroring
變更裝置
設定
3
4
5
✎✎ 附註
`` 存取步驟可能會因選定的功能表而
異。 升級軟體版本後,本播放機中的
OSD(螢幕顯示)可能會變更。
選取视频。
2
選取音樂 。
3
選取設定。
4
選取變更裝置 。
5
選取 Screen Mirroring。
6
選取相片。
7
選取播放光碟。
8
選取應用程式。
✎✎ 附註
`` 視訊、相片 和 音樂 選項需要您將相
應的光碟放入播放機中,或將 USB 快
閃裝置連接到播放機。
存取設定功能表
若要存取「設定」功能表或子功能表,請依
照下面的步驟操作:
1. 按下 POWER 按鈕。
將出現主功能表。
圖像
可以配置各種圖像選項,例如電視外觀
比例、解像度等等。
3D 設定
選取是否以 3D 模式播放含有 3D 內容的 Bluray 光碟。
✎✎ 附註
`` 對於某些 3D 光碟,要在 3D 播放期
間停止影片,請按一次 5 按鈕。 影
片將會 停止,並會停用 3D 模式選
項。 若要在播放 3D 影片時變更 3D
選項選取,請按一次按 5 按鈕。
Blu-ray 功能表 將會出現。 再按一次
5 按鈕,然後在 Blu-ray 功能表中選
取 3D 設定。.
`` 根據電視螢幕上畫面的內容和位置,
您可能會在左側或右側看到垂直的黑條。
電視外觀比例
視您電視的類型而定,您可能要調校屏幕大
小設定。
✎✎ 附註
`` 視光碟類型的不同,某些縱橫比可能
不可用。
`` 如果選取不同於電視縱橫比的縱橫比
選 項,則圖像可能會變形。
BD Wise(僅限 Samsung 播放機)
BD Wise 是 Samsung 最新的內部連接功能。
透過 HDMI 使用 BD Wise 將 Samsung 播
放機和 Samsung 電視互連,並且播放機和
電視上皆有 BD Wise 時,播放機會以 Bluray Disc/DVD 的視訊解析度和幀速率輸出視訊。
✎✎ 附註
`` 動預設為 BD Wise,並且 BD Wise 會出
現在「解析度」功能表中。
`` 如果將播放機連接至不支援 BD Wise 的
裝置,則不能使用 BD Wise 功能。
`` 為了 BD Wise 正常操作,請在播放機和
電視上都將 BD Wise 功能表設定為
開啟。
解像度
可讓您將 HDMI 視訊訊號的輸出解像度
設定為 自動、1080p、1080i、720p、
480p。 數字表示每幀的視訊行數。
i 和 p 分別表示逐行和隔行。 行數越
高,品質越高。
根據輸出模式的解析度
• Blu-ray 光碟/電子內容/數碼內容播放
HDMI / 已連接
輸出
設定
HDMI 模式
Blu-ray 光碟
電子內容/數
碼內容
BD Wise
Blu-ray 光碟
的解析度
1080p
自動
電視輸入的最
大解析度
電視輸入的
最大解析度
1080p@60F
(電影幀幅 :
關閉)
1080p@60F
1080p@60F
電影幀幅:自動
(24Fps)
1080p@24F
1080p@24F
1080i
1080i
1080i
720p
720p
720p
480p
480p
480p
• DVD 播放
輸出
設定
HDMI / 已連接
HDMI 模式
BD Wise
480i
自動
電視輸入的
最大解析度
1080p
1080p
1080i
1080i
720p
720p
480p
480p
11
✎✎ 附註
`` 如果連接至播放機的電視不支援電影幀
或選取的解 析度,訊息「如果在選取
「是」之後沒有顯示圖片,請等待 15
秒以恢復為之前的解析度。」將會出
現。如果選取是,電視的螢幕空白 15
秒鐘,然後解析度將自動恢復為先前的
值。
`` 如果在變更解析度之後螢幕保留空白,
請取出所有光碟,然後按住播放機前面
的 ^ 按鈕 5 秒鐘以上。 所有設定將恢
複為出廠預設值。 遵循上一頁中的步驟
訪問每種模式並選取電視將支援的顯示設
定。
HDMI 色彩格式
可讓您設定 HDMI 輸出的色彩空間格式,以
電影幀幅 (24Fps)
將電影幀幅 (24Fps) 功能設定為自動可讓您
設定
與所連接裝置(電視,顯示器等)的功能相符。
HDMI 深色技術
位元流 (未經處理)
PCM
HDMI 接收
同軸
HDMI 接收或
同軸
支援 HDMI 的 AV
接收器或 同軸
PCM
最多 7.1
聲道
PCM 2
聲道
PCM
PCM 2
聲道
重新編碼的 DTS
重新編碼的 Dolby
Digital *
再現。
Dolby Digital
PCM 2
聲道
PCM 2
聲道
Dolby Digital
Dolby
Digital
重新編碼的 DTS
重新編碼的 Dolby
Digital *
漸進模式
Dolby Digital
Plus
PCM 2
聲道
PCM 2
聲道
Dolby Digital
Plus
Dolby
Digital
重新編碼的 DTS
重新編碼的 Dolby
Digital *
Dolby TrueHD
PCM 2
聲道
PCM 2
聲道
Dolby TrueHD
Dolby
Digital
重新編碼的 DTS
重新編碼的 Dolby
Digital *
DTS
PCM 2
聲道
PCM 2
聲道
DTS
DTS
重新編碼的 DTS
重新編碼的 Dolby
Digital *
DTS-HD
HRA
PCM 2
聲道
PCM 2
聲道
DTS-HD
HRA
DTS
重新編碼的 DTS
重新編碼的 Dolby
Digital *
DTS-HD MA
PCM 2
聲道
PCM 2
聲道
DTS-HD MA
DTS
重新編碼的 DTS
重新編碼的 Dolby
Digital *
PCM
PCM 2
聲道
PCM 2
聲道
PCM 2 聲道
PCM 2
聲道
PCM 2 聲道
PCM 2 聲道
Dolby Digital
PCM 2
聲道
PCM 2
聲道
Dolby Digital
Dolby
Digital
Dolby Digital
Dolby Digital
DTS
PCM 2
聲道
PCM 2
聲道
DTS
DTS
DTS
DTS
可讓您以深色 從 HDMI OUT 插孔輸出視
訊。 深色提供更深的色度提供更精確的顏色
可讓您改善觀賞 DVD 時的畫面品質。
Blu-ray 光碟
上的音訊流
音效
數碼輸出
可讓您選取適合您的電視或 AV 接收器的數位音
訊輸出格式. 如需更多詳細資料,請參閱數碼
輸出選取表格。
DVD
上的音訊流
善畫質。
只能在支援此幅率的電視上享受電影幀
1080p 輸出解析度模式時,才能選取電影幀。
12
位元流
(Dolby D 重新編碼)
同軸
連線
將播放機的 HDMI 輸出調整為每秒 24 幀以改
幅 (24Fps) 功能。 只有播放機處於 HDMI
位元流
(DTS 重新
編碼)
HDMI 接收
`` 恢復出廠預設設定後,將會刪除所有已
儲存的使用者 BD 資料。
`` Blu-ray 光碟必須具有 24 幅率功能才能
使用電影幀幅 (24Fps) 模式。
數碼輸出選取
Blu-ray 光碟
的清晰度
任意
將主要特徵音訊和
BONUSVIEW 音訊流
一起解碼為 PCM 音訊,
並新增 Navigation
Sound Effects
(導覽音效)。
將主要特徵音訊和
將主要特徵音訊和
BONUSVIEW
僅輸出主要特徵音訊,
BONUSVIEW
音訊流
以便 AV 接收器可以解碼 音訊流一起解碼為
一起解碼為 PCM
音訊位元流。
PCM 音訊,並
音訊,並新增
您將聽不到
新增 Navigation
Navigation
Sound Effects
BONUSVIEW 音訊或
Sound Effects
(導覽音效),
Navigation
(導覽音效),
然後將 PCM
Sound Effects(導覽音
然後將 PCM 音訊
效)。
音訊重新編碼為
重新編碼為 Dolby
DTS 位元流。
digital 位元流。
* 如果 Source Stream 是 2 聲道,則不會套用「Dolby D 重新編碼」設定。
Blu-ray 光碟可能包括三種音訊流:
-- 主要特徵音訊: 主要特徵的音訊聲道。
-- BONUSVIEW 音訊: 附加聲道,例如導演或演員的註解。
-- 導覽音效: 選擇一些功能表導覽時,導覽音效可能會發出聲音。 導覽音效在每張 Blu-ray
光碟上各不相同。
✎✎ 附註
`` 請務必選取正確的 Digital Output,否則
將聽不到聲音或只聽到很大聲的雜音。
`` 如果 HDMI 裝置(AV 接收器,電視)與
壓縮的格式 (Dolby digital, DTS) 不相容,
則音訊信號輸出為 PCM。
`` 一般 DVD 沒有 BONUSVIEW 音訊和
Navigation Sound Effects(導覽音
效)。
`` 一些 Blu-ray 光碟沒有 BONUSVIEW 音
訊和 Navigation Sound Effects(導覽音
效)。
`` 如果播放 MPEG 音訊聲道,則音訊
訊號將輸出為 PCM,而不管 Digital
Output Selections 設為什麼 (PCM 或
Bitstream)。
`` 如果您的電視與壓縮多聲道格式 (Dolby
Digital, DTS) 不相容,則播放機可能會
輸出 PCM 2 聲道向下採樣的音訊,即使
將在設定功能表上選取了 Bitstream (Reencoded 或 Unprocessed) 也是如此。
`` 如果您的電視與超過 48kHz 的 PCM
採樣不相容,則播放機可能會輸出
48kHz 向下採樣的 PCM 音頻,即使將
PCMDownsampling 設定為關閉也是如
此。
PCM 向下採樣
可讓您選擇讓 96Khz PCM 訊號向下採樣為
48Khz,然後再將它們輸出到擴音機。 如果擴
音機或接收器與 96Khz 訊號不相容,請選擇
「開啟」。
• 關閉: 保持不壓縮動態範圍,以讓您聽到
原始聲音。
• 開啟: 對於所有三種 Dolby 格式,開啟動
態範圍控制。 讓較安靜的聲音大聲一些,
並降低較大聲音的音量。
縮混模式
可讓您選取與您的立體聲系統相容的多聲道縮
混方法。 您可以選擇將播放機縮混成普通立體
聲或兼容環繞音的立體聲。
設定網路連線
在開始之前,請與您的 ISP 聯絡以瞭解您的
IP 地址 是靜態的還是動態的。如果是動態
若要開始設定網路連線,請依照下面的步驟
操作:
1. 在主功能表中,按下 ▲▼◄► 按鈕以選取
設定,然後按 v。
2. 按 ▲▼ 按鈕選取網絡,然後按v。
3. 按 ▲▼ 按鈕選取網絡設定,然後按v。
4. 按 ▲▼ 按鈕選取網絡類型,然後按v。
5. 按 ▲▼ 按鈕選取有線 或 無線,然後按v。
6. 移至下一部分.
有線 - 手動
如果您具有靜態 IP 位址或「自動」程序不起
作用,
的,並且您使用 的是有線或無線連線,則建
則您將需要手動設定網路設定值。
議使用下面說明的自動 程序。
依照「有線網路」中的步驟 1 和 2 操作,然
如果您要連接至有線網路,請先使用 LAN 纜
後依照下面的步驟操作:
線將產 品連接至路由器,然後再開始設定程
序。如果您要連接至無線網路,請先斷開所
有有線網路連線再開始。
若要開始設定網路連線,請依照下面的步驟
網絡
ĞĞ
1. 選取網絡狀態。產品會搜尋網路,然後顯
示連線失敗訊息。
2. 在畫面底端中,選取 IP 設定,然後按
v 按 鈕。IP 設定畫面將會出現。
操作:
3. 選取「IP 設定」欄位,然後按 v 按
有線網路
4. 在「IP 設定」欄位中選取手動輸入,然
ĞĞ
有線 - 自動
1. 在主畫面中,選取設定,然後按 v 按鈕.
2. 選取網路,然後按 v 按鈕。
3. 選取網絡設定,然後按 v 按鈕。
4. 在網路設定畫面中選取有線,然後按 v 鈕。
5. 選取連接按鈕,然後按 v 按鈕。產品便
會偵測有線連線,驗證網路連線,然後連
接至網路。
鈕。
後按 v 按鈕。
5. 選取要輸入的值(例如 IP 地址),然後
按 v 按鈕。使用遙控器上的數字小鍵
盤輸入值的數 字。您還可以使用 ◄► 按
鈕來輸入數字。使用 遙控器上的 _+ 按
鈕從值的一個輸入欄位移至 另一個輸入
欄位。完成一個值的輸入之後,按 v 按
鈕。.
6. 按 ▲ 或 ▼ 按鈕移至另一個值,然後依照
步驟 5 中的說明輸入值的數字。.
7. 重複步驟 5 和 6,直到填寫完所有值為
止。
動態範圍控制
可讓您將動態範圍控制套用至 Dolby Digital、
Dolby Digital Plus 和 Dolby TrueHD 音訊。
• 自動: 根據 Dolby TrueHD 聲道中的資
訊,自動控制 Dolby TrueHD 音訊的動
態範圍。 對於 Dolby Digital 和 Dolby
Digital Plus,還會開啟動態範圍控制。
13
✎✎ 附註
2. 產品會搜尋網路,然後顯示連線失敗訊
網絡設定
息。
選擇您的網絡類型.
`` 網路值可從網際網路提供商取得
網絡類型
8. 完成輸入所有值之後,然後按 RETURN
無線
無線網絡
新增 網絡
您可以將Blu-ray
播放機 連接至互 聯網。請選擇要
使用的無線網絡。
或 EXIT 按鈕。產品會驗證網路連線,然
WPS(PBC)
後連接到網 路。
無線網路
您可以採用四種方式設定無線網路連線:
-- 無線自動
-- WPS(PIN)
當您設定無線網路連線時,目前透過產品連
接的所有無線網路裝置或者(如果適用)產
品目前的有線連線將會斷開。.
ĞĞ
無線 - 自動
1. 在主畫面中,選取設定,然後按 v 按鈕。
6. 在「安全」畫面上,輸入網路的安全代碼
或通行碼。使用遙控器上的數字按鈕直接
輸入數字。輸入字母的方法是使用箭頭按
鈕選取字母,然後按 v 按鈕。
7. 完成後,選取完成,然後按 v 按鈕。產
品會驗證網路連線,然後連接到網路。
8. 驗證完成後,選取確定,然後按 v按
鈕。
✎✎ 附註
`` 應該可以在用來設定路由器或數據機
2. 選取網絡,然後按 v 按鈕。
的設定畫面上 找到「安全碼」或「通
3. 選取網絡設定,然後按 v 按鈕。
4. 在「網絡設定」畫面中選取無線,然後按
v 按鈕。產品會搜尋並顯示可用網路的
清單。
' 返回
5. 選取所需的網路,然後按 v 按鈕。
-- 無線手動
-- WPS(PBC)
m 移動 " 選擇
行碼」。
ĞĞ
無線 - 手動
如果您具有靜態 IP 位址或「自動」程序不起
作用,則您將需要手動設定網路設定值。.
1. 依照「無線 - 自動」中直至步驟 5 的指示
操作。.
14
通 行碼。使用遙控器上的數字按鈕直接輸
3. 在畫面底端中,選取 IP 設定,然後按
v按鈕。IP 設定畫面將會出現。
4. 選取「IP 設定」欄位,然後按 v 按
搜尋 10.在「安全」畫面上,輸入網路的安全代碼或
鈕。
5. 在「IP 設定」欄位中選取手動輸入,然
後按 v 按鈕。
6. 選取要輸入的值(例如 IP 地址),然後
入數 字。輸入字母的方法是使用 ▲▼◄►
按鈕選取 字母,然後按 v 按鈕。
11.完成後,選取畫面右側的完成,然後按
v 按 鈕。產品會驗證網路連線,然後連
接到網路。
12.產品驗證網路之後,選取確定,然後按
v 按鈕。
WPS(PBC)
按 v 按鈕。使用遙控器上的數字小鍵盤
ĞĞ
來輸入數字。使用 遙控器上的 _+ 按鈕從
1. 在主畫面中,選取設定,然後按 v 按
完成一個值的輸入之後,按 v 按鈕。.
2. 選取網絡,然後按 v 按鈕。
步驟 6 中的說明輸入值的數字。
4. 在「網絡設定」畫面中選取無線,然後按
止。
5. 按遙控器上的 ▲▼ 按鈕,然後按 ◄► 按
輸入值的數字。您還可以使用 ◄► 按鈕
值的一個輸入欄位移至另一個輸入欄位。
7. 按 ▲ 或 ▼ 按鈕移至另一個值,然後依照
8. 重複步驟 6 和 7,直到填寫完所有值為
✎✎ 附註
`` 網路值可從網際網路提供商取得。.
9. 完成後,然後按 RETURN 或 EXIT 按鈕。
「安全性」畫面將會出現。
鈕。
3. 選取網絡設定,然後按 v 按鈕。
v 按鈕。
鈕選取 WPS(PBC)。
6. 按遙控器上的 v 按鈕。「在接下來的兩
分鐘 內按無線路由器上的 PBC 按鈕」訊
息將會出現。
7. 在兩分鐘內按路由器上的 WPS(PBC) 按
鈕。產 品將自動獲得它需要的所有網路設
`` 如需如何存取路由器設定畫面的說
定,然後連 接至網路。網路狀態畫面將會
明,請與路由器的製造商聯絡,或參
出現。驗證網路連線之後,產品將連接至
閱路由器的使用手冊。
網路。
ĞĞ
✎✎ 附註
WPS(PIN)
`` 對於 WPS 連線,應將無線路由器的
安全加密設為 AES。WPS 連線不支援
WEP 安全加密。.
在開始之前,請在電腦上開啟路由器的設定功
能
網絡測試
表,並存取含有 WPS PIN 輸入欄位的畫面。.
1. 在主畫面中,選取設定,然後按 v 按
鈕。
2. 選取網絡,然後按 v 按鈕。
3. 選取網絡設定,然後按 v 按鈕。
4. 在「網絡設定」畫面中選取無線,然後
按 v 按鈕。產品會搜尋並顯示可用網
路的清單。
5. 選取所需的網路,然後按 ► 按鈕。
6. 選取 WPS(PIN),然後按 v 按鈕。
PIN 快顯 視窗將會出現。
7. 在路由器設定畫面的 WPS PIN 輸入欄位
中輸入 該 PIN,然後儲存該畫面。
1. 開啟 Wi-Fi direct 裝置並啟動其 Wi-Fi
Direct 功能。
2. 在主畫面中,選取設定,然後按 v 按
鈕。
3. 選取網絡,然後按 v 按鈕。
4. 選取 Wi-Fi Direct,然後按 v 按鈕。
所連接的 Wi-Fi Direct 裝置將會出現。
可採用三種方法完成 Wi-Fi 連線:
5. 移至下一部分:
• 透過 Wi-Fi 裝置。.
• 使用 PBC 透過播放機.
使用此選單可以連線至有線網路,或檢查您
的網路連線是否正確。
網絡狀態
檢查是否已建立網路與網際網路的連
線。
Wi-Fi Direct
Wi-Fi Direct 功能可讓您使用對等網路將 WiFi Direct 裝置連接至播放機及相互連接,不
需要使用無線路由器。
✎✎ 附註
`` 如果透過 WI-Fi Direct 連接,則一些
Wi-Fi Direct 裝置可能不支援 DLNA
功能。如果出現這種情況,則建議您
變更裝置之間的網路連線方法。
`` 藍牙傳輸可能干擾 Wi-Fi Direct 訊
號。 在使用 Wi-Fi Direct 功能之前,
• 使用 PIN 透過播放機。
下面說明每種方法.
使用 PBC 透過播放機
1. 選取要連接至本播放機的 Wi-Fi Direct 裝
置,然後按 v 按鈕。PBC/PIN 快顯視
窗將會出現。
2. 選取 PBC,然後按 v 按鈕。PBC 快顯
視窗將會出現。
3. 在 2 分鐘內按 Wi-Fi Direct 裝置上的 PBC
按鈕。
4. 「正在連接」和「已連接」快顯視窗將會
依次出現。快顯視窗關閉後,應可看到在
Wi-Fi Direct 畫面上列出的裝置顯示為已
連接。
使用 PIN 透過播放機
透過 Wi-Fi 裝置
1. Wi-Fi 裝置上,依照連接至另一個 Wi-Fi
Direct 裝置的裝置之程序操作。如需指
1. 選取要連接至本播放機的 Wi-Fi Direct 裝
置,然後按 v 按鈕。PBC/PIN 快顯視
窗將會出現。
示,請參閱該裝置的使用手冊。
2. 選取 PIN,然後按 v 按鈕。PIN 快顯視
到一個快顯視窗,說明支援 Wi-Fi Direct
3. 記下快顯視窗中的 PIN 碼,然後將它輸入
2. 完成該程序之後,應該會在電視畫面上看
的裝置已請求連接。選取確定,然後按
v 按鈕。
3. 正在連接」和「已連接」快顯視窗將會依
次出現。快顯視窗關閉後,應可看到在
Wi-Fi Direct 畫面上列出的裝置顯示為已
連接。
窗將會出現。
到要連接之 Wi-Fi Direct 裝置的相應欄位
中。
4. 正在連接」和「已連接」快顯視窗將會依
次出現。快顯視窗關閉後,應可看到在
Wi-Fi Direct 畫面上列出的裝置顯示為已
連接。
強烈建議您關閉任何現用行動式裝置
的藍牙功能。
15
✎✎ 附註
`` 使用 Wi-Fi Direct 功能時,目前的有
線或無線網路連線將會斷開連接。.
`` 使用 Wi-Fi Direct 功能時,不會顯示
文字檔(例如副檔名為 .TXT 或 .DOC
的檔案)。
Screen Mirroring
Screen mirroring 功能可讓您在連接至產品的
電視上,檢視智慧型電話或 Android Tablet 的
畫面。
1. 在主功能表中,按下 ▲▼◄►,選取
Screen Mirroring,然後按 v 按鈕。
2. 在裝置上啟動 DLNA Cast。
3. 在裝置上,在可用的裝置清單中尋找
Blu-ray 播放機的名稱並予以選取。
4. 電視將會顯示 PIN。在裝置中輸入該
PIN。
5. 電視會顯示正在連接訊息(例如,正在
連接至 Android_92gb...),然後顯示已
連接訊息。
6. 稍後,裝置的畫面將出現在電視螢幕上。
7. 若要停止 Screen Mirroring,請按遙控器
上的 EXIT 或 RETURN 按鈕,或是停用
智慧型電話的 Screen Mirroring 功能
✎✎ 附註
`` 甚麼是有效的證書?
當播放機使用 BD-LIVE 來將光碟資料
和要求傳送至伺服器以認證光碟時,
伺服器使用所傳送的資料來檢查該光
碟是否有效,並將證書傳回給產品。
`` 在您使用 Screen Mirroring 功能時,
可能會出現視訊時斷時續或音訊滯後
情形,具體視環境而定。
`` 使用 BD-LIVE 內容時,網際網路連線
可能會受到限制。
`` 藍牙傳輸可能干擾 Screen Mirroring
訊號。 在使用 Screen Mirroring 功
能之前,強烈建議您關閉智慧型電話
或智慧型裝置(Tablet 等)的藍牙功
能。
設備名稱
可讓您為產品指定識別名稱。當您將外部裝
置(智慧型電話、平板電腦等)連接至產品
時,使用此名稱來識別產品。
BD-LIVE 互聯網連接
設定這個選項以在使用 BD-LIVE 服務
時,允許或禁止網際網路連線。
• 允許(所有 ): 將對所有 BD-LIVE 內容允許
網際網路連線。
• 允許 (僅限有效 ): 僅對於包含有效證書的
BD-LIVE 內容允許網際網路連線。
• 禁止: 將對所有 BD-LIVE 內容都不允許網
際網路連線。
16
✎✎ 附註
`` 您可以連接至支援 DLNA Cast 的裝
置。 請注意,視製造商的不同,可能
並不完全支援連接至此類裝置。 如需
行動式連線支援的詳細資訊,請參閱
製造商的網站。
使用 BD-LIVE™
使用 DLNA 功能
DLNA 可讓您播放位於電腦、 相容的播
放機上 相容的音樂、視訊和相片檔案。
若要將 DLNA 與播放機搭配使用,則
必須將播放機連接到網路(請參閱第
13~16 頁)。若要將 DLNA 與電腦搭
配使用,則必須在電腦上安裝 DLNA 軟
體。
如果您有與,則可以直接使用 DLNA,
無須其他軟體。
將播放機連接到網路後,您可以使用
BD-LIVE 相容光碟享受各種與電影相關
的服務內容。
1. 將 USB 記憶棒插入播放機側邊的 USB
插孔,然後檢查其剩餘記憶體。 記憶體
裝置至少要有 1GB 可用空間才能容納
BD-LIVE 服務。
2. 插入支援 BD-LIVE 的 Blu-ray 光碟。
3. 從光碟製造商提供的各種 BD-LIVE 服務
內容中選取項目。
✎✎ 附註
`` 使用 BD-LIVE 和提供的內容的方式可
能會因光碟製造商而異。
系統
設置
使用「設定」功能,您可以設定語言、網路
設定等。 如需「設定」功能的相關資訊,請
參閱本使用手冊中的「設定」部分(請參閱
第 10 頁)。
快速啟動
可讓您將播放機設定為透過縮短啟動時間而快
速開啟。.
✎✎ 附註
`` 如果將此功能設定為開啟,待機電源
消耗將會提高。
Anynet+(HDMI-CEC)
BD 資料管理
Anynet+ 是一種方便功能,它提供與
其他帶有 Anynet+ 功能的 Samsung
播放機的連結操作。
要操作此功能,請使用 HDMI 電纜將本
播放機連接到 Samsung 電視。
Anynet+ 設定為 on 時,您可以使用
Samsung 電視遙控器操作本播放機,
並且只需按電視遙控器上的播放 (
)
按鈕就可以開始播放光碟。
如需詳細資訊,請參閱電視使用手冊。
可讓您管理下載的內容,這些內容透過支援
✎附註
BD-LIVE 服務的 Blu-ray 光碟存取,並儲存
在連接的 快閃記憶體裝置上。
可以檢查裝置資訊(包括儲存媒體大小)、
安全性
間斷開 USB 裝置的連接,光碟播放將
會停止。
`` 本播放機支援 FAT16、FAT32 和
`` 如果您的 Samsung 電視具有
Anynet+ 標誌,則它支援 Anynet+
功能。
速度的 USB 裝置。
`` 對於某些電視產品,如果透過
Anynet+ 功能連接至此產品,開啟電
視時可能會顯示一則警告快顯訊息,
說明找不到連線。 然而,Anynet+ 連
線仍已正確建立並可供使用。
`` 選取的語言只有在光碟上受支援時才
會出現。
`` 在外部記憶體模式中,如果在播放期
2.0 通訊協定、4 MB/秒或更快讀/寫
`` 「恢復播放」功能在格式化儲存裝置
後可能不工作。
`` 「BD 資料管理」可使用的總記憶體可
能會因條件而異。
數字越大,內容成熟程度越高。
更改密碼
變更用於存取安全功能的 4 位密碼。
✎附註
✎附註
NTFS 檔案系統。 建議使用支援 USB
`` 關閉產品之後,重新拔插電源線可讓
它自動開機。 一小會之後,它會在
大約 15 秒鐘內自動關閉以重新建立
Anynet+ 連線。
可以選取偏好用於螢幕功能表、光碟功
能表等的語言。
刪除 BD 資料或變更快閃記憶體裝置。
`` 如果 HDMI 電纜線不支援 CEC,就不
能使用此功能。
`` 視您的電視而定,某些 HDMI 輸出解
析度可能不起作用。
請參閱電視的使用手冊。
語言
預設 PIN 是 0000。如果您尚未建立您自己
的 PIN,請輸入預設 PIN 以存取安全功能。第
一次存取安全功能之後,可以使用「變更 PIN
碼」功能來變更 PIN。
如果您忘記了您的密碼
1. 取出光碟。
2. 按住前面板上的 ^ 按鈕 5 秒鐘以上。
所有設定將恢復為出廠設定。
✎附註
`` 恢復出廠預設設定後,將會刪除所有
使用者已儲存的 BD 資料。
一般
BD 家長分級控制
除非輸入密碼,否則禁止播放特定年齡等級
的 Blu-ray 光碟。
時區
您可以指定適合您所在地區的時區。
DVD 家長分級控制
此功能與已指定年齡等級或數字等級(指示
DivX® VOD
檢視 DivX® VOD 註冊碼以購買和播放
DivX® VOD 內容。
內容的成熟程度)的 DVD 配合使用,並可以
幫助您控制家人觀賞的 DVD 類型。 這些數
字可以幫助您控制家人可以觀賞的 DVD 類
型。選擇表示等級的數字時,您應選擇希望
播放機可以播放的最高等級數。 例如,如果
您選擇了等級 6,則播放機會播放等級不超
過 6 的光碟,但不會播放等級為 7 或 8 的光
碟。
17
支援
軟件升級
「軟體升級」功能表可讓您升級播放機
的軟體以改良效能或取得其他服務。 您
可以採用四種方法來升級:
從網絡中下載
若要透從網絡中下載升級,請依照下面
的步驟操作:
從USB下載
自動升級通知
聯絡 Samsung
若要使用 從USB下載 來升級,請依照
下面的步驟操作:
如果您已將播放機連接至網路,然後將
自動升級通知 設定為 開,則當有播放
機的新軟體版本可用時,播放機會通知
您。
若要將 自動升級通知 設定為 開,請執
行下列步驟:
提供聯絡資訊以協助您使用播放機。
1. 選取 自動升級通知,然後按 v 按鈕。
重設
1. 請造訪 www.samsung.com/
bluraysupport
2. 將最新的 USB 軟體升級 zip 保存檔下載
到電腦。
3. 將該 zip 保存檔解壓縮到電腦。 應該使
用與 zip 檔案同名的單一 RUF 檔
1.在播放機的功能表中,設定 > 支援 >
軟體升級。
2.選取 從網絡中下載,然後按 v 按
鈕。 「正在連接至伺服器」訊息便
會出現。
3.如果有更新可用,一則快顯訊息將會
出現
4. 將該RUF 檔複製到 USB 快閃磁碟中。
5. 更新完成後,播放機會自動重新啟動。
✎✎ 附註
4. 如果您選取 是 ,下載程序將會開始。
(在升級期間,切勿開啟播放機。)
✎✎ 附註
`` 播放機關閉然後再次自行開啟後,升
級即告完成。
`` 在執行更新程序期間,切勿手動關閉
或 開啟播放機。
`` 對於在軟體升級期間,由於網際網路
6. 在播放機的功能表中,設定 > 支援 > 軟
1. 若要升級韌體,請在快顯訊息上選取
是。產品將自動關閉,然後重新啟動,
接 著開始下載。 (此時切勿手動打開產品。)
閃磁碟插入到播放機的 USB 埠中。
體升級。
7. 選取 從USB下載 。
`` 使用 USB Host 插孔來升級軟體時,
光碟托盤必須是空的。
`` 軟體升級完成後,請在「軟體升級」
功能表中檢查軟體詳情。
`` 在軟體升級期間,切勿關閉播放機。
否則會導致播放機運作失常。
`` 使用 USB Host 插孔進行軟體升級必
須只使用 USB 快閃記憶棒進行。
時,光碟托盤必須是空的。
18
如果有新的軟體版本可用,播放機會透
過快顯訊息通知您。
播放 機故障,Samsung Electronics
`` 使用 從網絡中下載 插孔來升級軟體
按鈕。
5. 請確保光碟托盤是空的,然後將 USB 快
連 線不穩定或消費者的疏忽而導致的
不承擔 任何法律責任。
2. 使用 ▲▼ 按鈕選取 開啟,然後按 v
2. 將顯示更新進度彈出式訊息。
3.
更新完成後,播放機會自動重新啟動。
✎✎ 附註
`` 播放機關閉然後再次自行開啟後,升
級即告完成。
`` 在執行更新程序期間,切勿手動關閉
或開啟播放機。
`` 對於在軟體升級期間,由於網際網路
連 線不穩定或消費者的疏忽而導致的
播放機故障,Samsung Electronics
不承擔任何法律責任。
服務合約條款
查看有關第三方的內容及服務的一般性
免責聲明。
除了網路和 所有設定都將恢復為預設值。
方法 2
媒體播放
✎✎ 附註
播放商業錄製的光碟
1. 按 8 按鈕以開啟光碟托盤。
2. 輕輕將光碟放入托盤,光碟的標籤朝上。
3. 按 8 按鈕以關閉光碟托盤。 播放將自
動開始。
播放 USB 裝置上的檔案
有兩種方法可用來透過本播放機播放或觀看
位於 USB 裝置上的多媒體檔案。
方法 1
1. 開啟播放機。
2. 將 USB 裝置連接至播放機前面的 USB
埠。「已連接新裝置」快顯視窗將會出
現。
播放光碟
相片
視頻
音樂
已連接新裝置
相片
123
音樂
> 移動 " 選取 ' 返回
App 1
App 2
App 3
App 4
App 5
Screen Mirroring 變更裝置
3. 使用 ▲▼ 按鈕選取相片、視頻、或 音
設定
2. 將 USB 裝置連接至播放機前面的 USB
埠。. 選取「變更裝置」,然後按 ▲▼ 按
鈕以選取 USB。然後按 v 按鈕。
樂,然後按 v 按鈕。相片、視頻和音
樂畫面將會出現,並列出裝置的內容。
播放光碟
相片
視開啟內容的排列方式而定,您將看到
沒有光碟
資料夾及/或個別檔案。
123
沒有光碟
✎✎ 附註
`` 雖然播放機可以顯示所有內容類型的
資料夾,但是它僅顯示您在步驟 3 中
選取之內容類型的檔案。例如,如果
您選取了音樂,您只能看到音樂檔
案。您可以變更內容類型選擇,方法
是回到相片、視頻和音樂畫面並移至
下面「方法 2」中的步驟 3。
4. 必要時,使用 ▲▼◄► 按鈕選取資料
夾,然後按 v 按鈕。
5. 選取要觀看或播放的檔案,然後按 v
按鈕。
6. 按 RETURN 按鈕結束資料夾,或按
EXIT 按鈕回到主畫面。
視頻
沒有光碟
`` 如果該快顯視窗不出現,請轉至方法
2。
5. 使用 ▲▼◄► 按鈕選取要觀看或播放的
檔案,然後按 v 按鈕。
1. 開啟播放機。
7. 如需如何控制 USB 裝置上視訊、音樂
和圖片播放的說明,請移至第 20~22
頁。
App 1
App 2
App 3
視頻
音樂
已連接新裝置
6. 按 RETURN 按鈕結束資料夾,或按
EXIT 按鈕回到主畫面。
7. 如需如何控制 USB 裝置上視訊、音樂
和圖片播放的說明,請移至第 20~22
頁。
✎✎ 附註
`` If 如果在播放 USB 裝置時插入光碟,
裝置模式將自動切換為「光碟」。
a
播放具有使用者錄製的內容的光碟
App 4
App 5
More
關閉
Screen Mirroring i變更裝置
設定
您可以播放您錄製在 Blu-ray、DVD 或 CD
光碟 上的多媒體檔案。
3. 使用 ▲▼◄► 按鈕選取按鈕選取相片、
視頻 或 音樂,然後按 v 按鈕。相
片、視頻和音樂畫面將會出現,並列出
裝置的內容。視開啟內容的排列方式而
定,您將看到資料夾及/或個別檔案。
✎✎ 附註
`` 雖然播放機可以顯示所有內容類型的
資料夾,但是它僅顯示您在步驟 3 中
選取之內容類型的檔案。例如,如果
您選取了音樂,您只能看到音樂檔
案。您可以透過回到相片、視頻和音
樂畫面並重複步驟 3 來變更此選項。
1. 將使用者錄製的光碟放入光碟托盤中,
光碟 的標籤朝上,然後關閉托盤。
2. 使用 ◄► 按鈕選取要觀看或播放的內容
類型 - 相片、視頻 或 音樂 - 然後按 v
按鈕。
✎✎ 附註
`` 雖然播放機可以顯示所有內容類型的
資料夾,但是 它僅顯示您在步驟 2 中
選取之內容類型的檔案。例 如,如果
您選取了音樂,您只能看到音樂檔案
您可以透過回到 首頁 畫面並重複步驟
2 來變更此選項。
4. 必要時,使用 ▲▼◄► 按鈕選取資料
夾,然後按 v 按鈕。
19
3.
將會出現一個畫面,其中列出裝置的內
容。 視內容的排列方式而定,您將看到
資料夾及/或個別檔案。
4. 必要時,使用 ▲▼◄► 按鈕選取資料
夾,然 後按 v 按鈕。
5. 使用 ▲▼◄► 按鈕選取要觀看或播放的
檔 案,然後按 v 按鈕。
6.
按 RETURN 按鈕一次以上結束目前的
畫面、結束資料夾或回到 首頁 畫面。
按 EXIT 按鈕以直接回到 首頁 畫面。
7. 如需如何控制光碟上視訊、音樂和圖片
播放的說明,請移至第 20~22 頁。
2. 依照 DLNA 軟體安裝/說明手冊中的指示
操作,設定裝置和檔案以進行播放或觀
看.
3. 在播放機的主畫面上選取「變更裝置」,
然後按 v 按鈕。 在出現的已連接至
DLNA 的裝置清單中,選取您的電腦或其
他與 DLNA 相容的裝置,然後按 v 按
鈕。一個畫面將會出現,其中列出可用的
檔案。
按 RETURN 按鈕一次以上結束目前的
畫面、結束資料夾或回到 首頁 畫面。
按 EXIT 按鈕以直接回到 首頁 畫面。
9. 如需如何控制光碟上視訊、音樂和圖片
播放的說明,請移至第 20~22 頁。
控制視訊播放
4. 使用 ◄► 選取要播放的內容類型 - 相
片、視頻 或 音樂 - 然後按 v 按鈕。
您可以控制位於 Blu-ray、DVD、CD 或 USB
✎✎ 附註
定,本手冊中說明的一些功能可能無法使用。
`` 雖然播放機可以顯示所有內容類型的
資料夾,但是它僅顯示您在步驟 4 中
選取之內容類型的檔案。例如,如果
您選取了音樂,您只能看到音樂檔
使用 DLNA
8.
儲存裝置上的視訊內容的播放。 視光碟而
起作用。
遙控器上用於播放視訊的按鈕
2
樂畫面並重複步驟 4 來變更此選項 。
Blu-ray 光碟播放機
播放電腦的檔
案
DLNA 連線
1. 將 Blu-ray 光碟播放機、電腦及/或 DLNA
相容裝置連接到相同的無線網路。
5. 將會出現一個畫面,其中列出 PC 或
DLNA 裝置的內容。 視內容的排列方式
而定,您將看到資料夾及/或個別檔案。
• 要恢復正常速度播放,請按 6 按鈕。
6 按鈕
開始播放。
5 按鈕
停止播放。
7 按鈕
暫停播放。
快動作播放
在播放期間,按 3 或 4
按鈕。
每次按 3 或 4 按鈕,播
放速度都會變更。
慢動作播放
在暫停模式中,按 4 按鈕。
每次按 4 按鈕按鈕,播放
速度都會變更。
在 Blu-ray 光碟/DVD 播放期間,此按鈕不
案。您可以透過回到相片、視頻和音
電腦
與播放相關的按鈕
在「搜尋 」、「慢動作播放」和「逐個動
作播放」模式下,播放機不會播放聲音。
1
AUDIO
HOME
SUBTITLE
6. 必要時,使用 ▲▼◄► 按鈕選取資料
夾,然 後按 v 按鈕。
在暫停模式中,按 7 按鈕。
逐個動作播放 每次按 7 按鈕,都會出現
新的一幀。
在暫停模式中,按 1 或
2 按鈕。
跳過動作播放 每次按 1 或 2 按鈕,光
碟都會移至上一個章節/檔
案或下一個章節/檔案。
使用光碟功能表、標題功能表、快顯
7. 使用 ▲▼◄► 按鈕選取要觀看或播放的
功能表和標題清單
檔 案,然後按 v 按鈕。
BONUS
VIEW
REPEAT
A-B
REPEAT
FULL
SCREEN
DISC MENU
按鈕
TITLE MENU 在播放期間,按此按鈕可
按鈕
以啟動標題功能表功能。
POPUP
MENU 按鈕
20
在播放期間,按此按鈕可
以啟動光碟功能表功能。
在播放期間,按此按鈕可以
啟動快現標題功能表功能。
控制音樂播放
您可以控制位於 Blu-ray 、CD 、DVD 或
USB、或電腦上的音樂內容的播放。
重複音訊 CD (CD-DA)/MP3
播放清單
6.
1. 在播放清單播放期間,按 TOOLS 按鈕。
1. 若要移至音樂清單,請按 5 或
RETURN 按鈕。
「音樂清單」畫面將會出現。
✎✎ 附註
TRACK 001
重複模式
擷取 TRACK 002
遙控器上用於播放音樂的按鈕
1/6
播放清單
工具
TRACK 001
?
關閉 \05:57
音樂
04:27
> 移動 < 調整 ' 返回
TRACK 003
+
00:08 / 05:57
TRACK 005
CD
" 暫停 c 選擇
4
3
1
2
AUDIO
4
SUBTITLE
跳過: 在播放期間,按 1 或 2 按
鈕移至播放清單的上一頁或下一頁。
BONUS
REPEAT
A-B
REPEAT
FULL
SCREEN
5 按鈕:停止曲目。
快速播放(僅限音訊 CD (CD-DA))
在播放期間,按 3 或 4 按鈕。
每次按 3 或 4 按鈕,播放速度都會變更。
5
暫停: 暫停曲目。
6
6 按鈕:播放當前選取的曲目。
關閉
02:38
TRACK 006
TRACK 005
02:38
02:38
TRACK 008
TRACK 007
03:35
02:38
02:38
TRACK 010
TRACK 009
工具 ' 返回
3. 按 v 按鈕。
數字按鈕 (僅限音訊 CD (CDDA)):在播放清單播放期間,按所
需的曲目編號。
將會播放選取的曲目。
VIEW
3
HOME
5
6
TRACK 004
02:38
03:17
2. 按 ◄► 按鈕選取 曲目, 全部, 隨機式, 或
關閉.
02:38
TRACK 003
02:38
02:38
2
TRACK 002
02:38
03:41
TRACK 006
1
TRACK 001
04:07
TRACK 004
1/2 頁
TRACK 001
CD
a 變更裝置
c 選擇
工具 ( ) 跳到頁面 ' 返回
2. 按 ▲▼◄► 按鈕移至所需的曲目,然後
按 黃色 (C) 按鈕。鉤號將出現在該曲目上。
重複此程序以選取其他曲目。
將以錄製的順序播放歌
曲。
(
) 曲目
重複目前的歌曲。
(
) 全部
重複所有歌曲。
(
) 隨機式
隨機選項會隨機播放歌
曲。
3. 若要從清單移除曲目,請移至曲目,然
後再次按 黃色 (C) 按鈕 按鈕。
將會取消曲目上的鉤號。
4. 完成後,按 v 按鈕。 您已選取的曲目
將顯示在畫面右側。 播 放機會播放第
一個曲目。
5.
若要變更播放清單,請按 RETURN 按
鈕回到 音樂清單。 重複步 驟 2、
3 和 4。
若要取消播放清單並返回到 首頁 畫
面,請按 RETURN 或 EXIT 按鈕。
`` 可以在音訊 CD (CD-DA) 上建立最多
含有 99 個曲目的播放清單。
`` 如果您移除播放清單中的所有曲目,
然後按 v 按鈕,則播放機會列出並
播放光碟上的所有曲目。
Ripping
可讓您將音訊檔案內容從音訊 CD (CD-DA)
複製到 USB/HDD 裝置。
1. 開啟光碟托盤。 將音訊 (CD-DA) 光碟放
在托盤上,然後關閉托盤。 將 USB 裝置
插入到產品前面的 USB 插孔中。
2. 在「停止」模式下,按 ▲▼◄► 按鈕移
至所需的曲目,然後按黃色 (C) 按鈕。 鉤
號將出現在該曲目上。重複此程序以選取
其他曲目。
3. 若要從清單移除曲目,請移至曲目,然
後再次按 黃色 (C) 按鈕 按鈕。
將會取消曲目上的鉤號。
4. 完成後,按 TOOLS 按鈕,使用 ▲▼ 按
鈕選取「擷取」,然後按 v 按鈕。
「擷取」快顯視窗隨之出現。
21
5. 使用 ▲▼ 按鈕以選取用於儲存擷取檔案
的裝置,然後按 v 按鈕。.
✎✎ 附註
`` 正在進行擷取時,不要使裝置斷開連
接。
6. 如果要取消擷取,請按 v 按鈕,然後
選取是。選取否可繼續擷取。
7. 擷取完成後,「擷取完成。」訊息將會
出現。按 v 按鈕。按鈕回到「播放」
畫面。
✎✎ 附註
`` 些光碟可能不支援此功能。
`` 擷取」畫面上,您還可以選擇 全選 和 取消
全部選擇。
-- 使用全選選取所有曲目。這會取消
個別曲目選擇。
-- 使用取消全部選擇一次性取消選取
所有已選取的曲目。
碟盤複製到USB
可讓您將視訊/相片/音樂內容從資料光碟複
製到 USB/HDD 裝置。
1. 開啟光碟托盤。 將光碟放在托盤上,然
後關閉托盤。 將 USB 裝置插入到產品前
面的 USB 插孔中。 新裝置快顯視窗隨之
出現。
2. 按 ▲ 按鈕,然後按 ◄► 按鈕選取 CD 或
DVD。
7. 完成後,按 TOOLS 按鈕,使用 ▲▼ 按
3. 使用 ▲▼ 按鈕選取相片,視頻,或音
樂,然後按 v 按鈕。相片、視頻和音樂
畫面將會出現,並列出裝置的內容。視開
啟內容的排列方式而定,您將看到資料夾
及/或個別檔案。
鈕。 「複製到USB」快顯視窗隨之出
✎✎ 附註
`` 雖然播放機可以顯示所有內容類型的
資料夾,但是它僅顯示您在步驟 3 中
選取之內容類型的檔案。例如,如果
您選取了音樂,您只能看到音樂檔
案。您可以透過回到相片、視頻和音
樂畫面並重複步驟 3 來變更此選項。
4. 在「停止」模式下,使用 ▲▼◄► 按鈕
選取視訊、相片或音樂,然後按黃色 (C)
按鈕。一個勾選標記便會出現在所需項目
左側。
5. 重複步驟 4 選取其他所需項目。
6. 若要從清單中移除所需項目,請再按一次
黃色(C) 按鈕。便會移除所需項目上的勾
選標記。
鈕選取「複製到USB」,然後按 v 按
現。
8. 使用 ▲▼ 按鈕以選取用於儲存複製檔案
的裝置,然後按 v 按鈕。
播放相片內容
您可以播放位於 BLU-RAY 、DVD、CD 、
USB 儲存裝置上的相片內容 或 選取 PC。
使用工具功能表
在播放期間,按 TOOLS 按鈕。.
開始播放幻燈
✎✎ 附註
片/停止播放
`` 正在進行複製時,不要使裝置斷開連
接。
幻燈片播放
速度
選取「播放幻燈片」設定。
背景音樂
選取此項可在觀看幻燈片
時收聽音樂。
縮放
選取此項以放大目前的圖
片。 (最多放大 4 倍)
`` 部分光碟可能不支援此功能。
旋轉
`` 在「複製」畫面上,您還可以選擇
「全選」和「取消全部選擇」。.
選取此項以旋轉圖片。
(這會順時針或逆時針旋
轉圖像。)
資訊
顯示圖片資訊。
9. 如果要取消複製,請按 ▼ 按鈕,然後選
取是。選取否可繼續複製。
10.複製完成後,「複製完成。」訊息將會出
現。按 v 按鈕回到「播放」畫面。
✎✎ 附註
-- 使用「全選」可選取所有項目。 這
會取消個別項目選擇。
-- 使用「取消全部選擇」可一次性取
消選取所有已選取的項目。
✎✎ 附註
`` 視光碟或儲存裝置而定,「工具」功
能表可能不相同。
`` 若要啟用背景音樂功能,相片檔案與
音樂檔案必須在相同的儲存媒體中。
不過,聲音品質可能會受到 MP3 檔案
的位元速率、相片的大小和編碼方法
影響。
`` 在全螢幕模式中,不能放大字幕和 PG
圖形。
22
選取此項以播放/暫停幻燈片。
幻燈片
附錄
問題
忘記密碼 。
故障排除
• 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。
在請求服務前,請檢查下列內容。
問題
遙控器無法執行任何操作。
解決方案
• 在產品內部無光碟的情況下,按前面板上的 ^ 按鈕 5 秒鐘以上。
所有的設定,包括密碼,將恢復為出廠設定。
除非絕對必要,否則不要使用此操作。
解決方案
• 檢查遙控器裡的電池。 它們可能需要更換。
畫面出現噪訊或失真
• 請確定光碟未弄髒或無刮痕。
• 清潔光碟。
• 檢查電視與播放機的 HDMI 插孔之間的連接。
• 在不超過 6.1 米的距離內操作遙控器。
無 HDMI 輸出。
• 確定光碟安裝時,光碟的標籤面朝上。
異常 HDMI 輸出屏幕。
• 如果畫面上出現雪花噪訊,則表示電視不支援 HDCP(高頻寬數碼內
容保護) 。
光碟功能表 沒有出現。
• 請確定該光碟具有光碟功能表。
如果您遇到其他問題。
禁止訊息出現在螢幕上。
• 按無效的按鈕時,此訊息就會出現。
• 移到目錄,查找含有對當前問題解釋的使用手冊部分,然後再次遵照
程序操作。
• 檢查電視是否支援 480p、720p、1080i、1080p HDMI 輸入解析
度。
• 取出電池,按住一個或多個按鈕幾分鍾以耗盡遙控器內部的微處
理器,以便進行重設。 裝回電池,然後再次嘗試操作遙控器。
無法播放光碟。
• 檢查 Blu-ray 光碟/DVD 的區域代碼。
• 如果問題仍然無法解決,請聯絡距您最近的 Samsung 授權服務中
心。
• Blu-ray 光碟/DVD 軟體不支援此功能(例如,視角)。
• 您請求的標題、章節編號或搜尋時間超出範圍。
DLNA 功能
播放模式與 設定功能表 選擇
不同。
• 如果光碟沒有相應功能的編碼,則在 設定功能表 中選定的功能可
能不能正常工作。
我可以看到透過 DLNA 共用
的資料夾,但是看不到檔案。
• DLNA 只顯示對應於 影像、音樂 和 電影 類別的檔案。
不會顯示不對應於這些類別的檔案。
屏幕比例無法更改。
• Blu-ray 光碟/DVD 上的 螢幕比例 是固定的。
視訊播放斷斷續續。
• 檢查網路是否穩定。
• 這不是播放機運作失常。
無音訊。
• 請確定您已經在 音訊選項 功能表中選擇了正確的 數碼輸出。
屏幕訊號中斷 。
• 如果將 HDMI 輸出設定為電視不能支援的解析度(例如
1080p),則在電視上可能看不到圖片。
• 在產品內部無光碟的情況下,按前面板上的 ^ 按鈕 5 秒鐘以上。
所有設定將恢復為出廠設定。
• 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。
• 檢查網路電纜是否正確連接,以及網路是否超負荷。
• DLNA 相容裝置與播放機之間的無線連線不穩定。
請檢查連線。
電視與電腦之間的 DLNA 連線
不穩定。
• 同一個子網路中的 IP 位址必須是唯一的。 如果不唯一,IP 干
擾可能會導致此現象。
• 檢查是否啟用了防火牆。
若啟用,請停用防火牆功能。
23
問題
規格
解決方案
BD-LIVE
無法連接到 BD-LIVE 伺服
器。
• 使用 網路狀態 功能表檢查網路連接是否成功。
• 檢查是否將 USB 記憶體裝置連接至播放機。
一般
• 記憶體裝置至少要有 1GB 可用空間才能容納 BD-LIVE 服務。
可以在 BD 資料管理中檢查可用大小。
• 請檢查 BD-LIVE 網際網路連線 功能表是否設定為 允許(所有)。
USB
• 如果上述所有原因都不正確,請與內容提供商聯絡或將播放機更
新為最新的韌體。
使用 BD-LIVE 服務時發生錯
誤。
• 記憶體裝置至少要有 1GB 可用空間才能容納 BD-LIVE 服務。
可以在 BD 資料管理中檢查可用大小。
HDMI
音訊輸出
✎✎ 附註
`` 恢復出廠預設設定後,將會刪除所有已儲存的使用者 BD 資料。
維修
如果您要與我們聯絡以維修播放機,則在下列情況下可能需要收取管理費:
1. 您致電工程師上門維修,但是產品無缺陷。
2. 您將裝置帶到維修中心維修,但是產品無缺陷。 我們在上門服務或開始修理播放機之前,我們將為您提供管理費用。
建議您通讀本使用手冊,在 www.samsung.com 上線上搜尋解決方案,或者與 Samsung 客
戶中心聯絡,再將播放機送修。
網路
重量
1.0 公斤
尺寸
290 (寬) x 221 (深) x 39 (高) 毫米
工作溫度範圍
+5℃ 至 +35℃
工作濕度範圍
10 % 至 75 %
類型 A
USB 2.0
DC 輸出。
最大 5V 0.5 A。
視訊
2D:1080p, 1080i, 720p, 480p
3D:1080p, 720p
音訊
PCM ,位元流音訊
數碼音訊輸出
同軸
乙太網路
100BASE-TX 外部
無線 LAN
內置
安全
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC)
支援
-- 不支援等於或低於 10Mbps 的網路速度。
-- 設計和規格可能會隨時變更,恕不另行通知。
-- 如需電源和功耗資訊,請參閱貼在產品上的標籤。
-- 重量和尺寸均為近似值。
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變
更頻率、加大
功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,
應改善
至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻
電機須忍
受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
在5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備,限於室內使用。
24
符合性和相容性聲明
並非所有光碟都相容
• 根據下面所述的限制及本手冊中(包括本手冊中的「光碟類型和特性」一節) 說明的限
制,可以播放的光碟類型有: 預先錄製的商業 BD-ROM、DVD-VIDEO 和音訊 CD
(CD-DA) 光碟;BD-RE/-R、DVD-RW/-R 光碟;以及 CD-RW/-R 光碟。
• 上述光碟以外的光碟及/或不設計為使用本播放機播放。 並且由於下面提供的一個或多個
原因,上述的一些光碟也可能無法播放。
• Samsung 不能保證本播放機可以播放帶有 BD-ROM、BD-RE/-R、DVD-VIDEO、DVDRW/-R、DVD+RW/+R 和 CD-RW/-R 標誌的每張光碟,並且本播放機可能不能回應所有
操作指令或操作每張光碟的所有功能。下面列出造成這些問題和其他光碟相容性以及播放
機操作新格式或現有格式的光碟問題的可能原因:
• 對於 Blu-ray 光碟播放機前進式掃描輸出: 消費者應該注意到,並非所有高清晰度電視都
與本產品完全相容,可能會導致畫面中顯示偽影。 如果出現逐行掃描畫面問題,建議使用
者將連線切換為
「標準清晰度」輸出。 如果您有關於我們的電視與本產品相容性的問題,請聯絡我們的客
戶服務中心。
複製保護
• 因為已核准將 AACS(進階儲存內容系統)用作 Blu-ray 光碟格式的內容保護系統(類似
於對 DVD 格式使用 CSS(內容加擾系統)),對受 AACS 保護的內容存在播放、類比信
號輸出等特定限制。
本產品的操作和對本產品的限制可能會因購買時間而異,因為在生產本產品之後,AACS
-- Blu-ray 是新的且不斷發展的格式,且本播放機可能無法操作 Blu-ray 光碟的所有功能,
因為一些功能可能是在生產本播放機後新增到 Blu-ray 光碟格式的選用附加功能,並且
某些可用的功能可能會延後提供。
可能會採用及/或變更這些限制。 此外,BD-ROM 標記和 BD+ 另用作 Blu-ray 光碟格式的
-- 本播放機並不支援所有新的和現有的光碟格式版本。
客戶中心聯絡。
-- 可能會對新的和現有的光碟格式進行修正、變更、更新、改良及/或補充;
-- 一些光碟的生產方式使得在播放期間只允許特定或有限的操作和功能;
-- 帶有 BD-ROM、BD-RE/-R、DVD-VIDEO、DVD-RW/-R、DVD+RW/+R 和 CDRW/-R 標誌的一些光碟可能仍然是非標準化光碟;
內容保護系統,它施加特定限制,包括對 BD-ROM 標記及/或 BD+ 受保護內容的播放限
制。 若要取得 AACS、BD-ROM 標記、BD+ 或本產品的相關詳細資訊,請與 SAMSUNG
• 許多 Blu-ray/DVD 都進行了編碼以達到複製保護的目的。 因此,僅直接將您的播放機與您
的電視相連接,而不要連接到 VCR。 與 VCR 連接將導致受版權保護之 Blu-ray 光碟/DVD
光碟的畫面失真。
-- 一些光碟可能無法播放,具體視其實體狀態或錄製條件而定;
• 在美國著作權法和其他國家/地區的著作權法保護下,如果未經授權使用、顯示、散佈或修
-- 本播放機的操作方式與其他標準 DVD 播放機或其他 AV 裝置不同。和/或
• Cinavia 聲明: 本產品使用 Cinavia 技術來限制 使用某些商業製造的電影和視訊及其聲道
-- 在製作 Blu-ray 光碟、DVD 軟體及/或生產光碟時可能會出現問題和發生錯誤;
-- 出於本使用手冊說明的原因和 SAMSUNG 客戶服務中心發現和公佈的其他原因。
• 如果您遇到光碟相容性或播放機操作問題,請與 SAMSUNG 客戶中心聯絡。
也可以與 SAMSUNG 客戶中心聯絡以取得本產品的可能更新。
• 有關播放限制以及光碟相容性的其他資訊,請參閱本使用手冊的「預防措施」、「在閱讀
使用手冊之前」和「光碟類型和特性」等章節。
訂電視節目、錄影帶、Blu-ray 光碟、DVD 和其他材料,則您必須承擔民事及/或刑事責任。
的未經授權副本。 當偵測到禁止使用的未經授權副本時,將會顯示一則訊息,並且播放或
複製動作將會中斷。
Cinavia 技術的詳細資訊在 Cinavia 線上消費者資訊中心中提供,網址為:http://www.
cinavia.com。若要透過郵件請求關於 Cinavia 的其他資訊,請將含有您的郵寄地址的明信
片寄往: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA,92138,
USA。本產品採用 Verance Corporation 許可的專利技術,並且受美國專利 7,369,677 和
其他在美國及全球已頒發或正在申請的專利保護,並且此類技術的特定方面受版權和商業
機密保護。 Cinavia 是 Verance Corporation 的商標。 Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. 禁止還原工程或反向組譯。
網路服務免責聲明
授權
透過本裝置存取的所有內容和服務屬於協力廠商,並且受版權、專利權、商標和/或其他智慧
• 在 Dolby Laboratories 的授權下製造。 Dolby 和雙 D 標誌是 Dolby
Laboratories 的商標。
財產法保護。 提供此等內容僅供個人非商業使用。 除內容所有者或服務提供者授權的方式之
外,不得任何其他方式使用任何內容或服務。 除非適用的內容所有者或服務提供者事先明確
授權,您不得修改、複製、重新發佈、上載、張貼、傳送、翻譯、銷售、建立衍生作品、開
發或以任何方式或媒體散佈透過本裝置顯示的任何內容或服務。
協力廠商內容和服務「按原樣」提供。 對於此處提供的內容,SAMSUNG 不提供針對任何目
的明示或暗示的保證。 SAMSUNG 明確拒絕任何暗示的保證,包括但不限於適銷性或適合特
定用途的保證。 SAMSUNG 不保證透過本裝置可取得之內容或服務的準確性、有效性、及
時性、合法性或完整性;在任何條件下,包括疏忽所致,無論是合同行為還是侵權行為,對
於您或協力廠商使用內容或服務導致的任何直接、間接、偶然、特殊或附帶性毀損,及律師
費、開支或任何其他與此有關的損失或包含其中的資訊,SAMSUNG 將不承擔賠償責任,即
使 SAMSUNG 事先已被告知發生此等損失的可能性。
協力廠商服務隨時會中止或中斷,Samsung 不表示或保證任何內容或服務的可用期限。 對
於協力廠商透過網路和傳輸設備傳送的內容和服務,Samsung 無法控制。 在不影響本免責
聲明一致性的前提下,對於透過本裝置取得之任何內容或服務的中斷或中止,Samsung 明確
拒絕承擔任何責任。
Samsung 也不對內容和服務的相關客戶服務承擔責任。 任何與內容或服務相關的無服務問
題或要求,都應該直接轉至各自內容和服務的提供者。
• 如需 DTS 專利資訊,請造訪 http://patents.dts.com。在取得 DTS
Licensing Limited 授權的條件下製造。 DTS、符號及 DTS 和符號一起是
DTS, Inc. 的註冊商標,並且 DTS 2.0+Digital Out 是 DTS, Inc. 的商標。©
DTS, Inc. 保留所有權利。
• DivX
-- 關於 DIVX 視訊: DivX® 是 Rovi Corporation 子公司 DivX, LLC 建立
的數位視訊格式。 本產品是正式通過 DivX 認證的產品,它已通過嚴格
的測試,證明它可以播放 DivX 視訊。 請造訪 divx.com 以瞭解詳細資
訊,以及取得用於將檔案轉換為 DivX 視訊的軟體工具。
2.0+Digital Out
-- 關於 DIVX 視訊點播: 本產品是通過 DivX® 認證的裝置,必須註冊才能播放購買的 DivX
視訊點播 (VOD) 電影。 若要取得註冊碼,請在裝置的設定功能表中找到 DivX VOD 區
段。 請造訪 vod.divx.com,以取得如何完成註冊的詳細資訊。
-- 向 DivX® 認證以播放高達 HD 1080p 的 DivX® 視訊,包括優質內容。
DivX®、DivX Certified® 及相關聯的標誌是 Rovi Corporation 或其子公司的商標,並
在授權下使用。受下列一個或多個美國專利權保護: 7,295,673; 7,460,668; 7,515,710;
7,519,274。
• HDMI、HDMI 標誌和 High-Definition Multimedia Interface 是
HDMI Licensing LLC 在美國和其他國家/地區的商標或註冊商標。
• Oracle 和 Java 是 Oracle 及/或其子公司的註冊商標。 其他名稱可能是其
各自所有者的商標
• 開源軟體許可注意事項
-- 使用開源軟體時,產品功能表上會有 開源軟體許可 項目。
• Blu-ray Disc™、Blu-ray™ 和標誌是 Blu-ray Disc Association 的商標。
• DLNA®、DLNA 標誌及 DLNA CERTIFIED® 是 Digital Living Network
Alliance 的商標、服務標記或憑證標記。
聯絡 SAMSUNG WORLD WIDE
如果您有任何關於 Samsung 產品的問題或意見,請聯絡 SAMSUNG 客戶服務中心。
Area
Contact Centre 
` Asia Pacific
AUSTRALIA
NEW ZEALAND
CHINA
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
HONG KONG
(852) 3698 4698
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
` MENA
U.A.E
OMAN
KUWAIT
BAHRAIN
QATAR
EGYPT
ALGERIA
PAKISTAN
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
30308282 - Non Toll Free
0800112888
021-56997777
0120-327-527
1800-88-9999
1-800-10-7267864 [PLDT]
1-800-8-7267864 [Globe landline and
Mobile]
02-4222111 [Other landline]
1800-SAMSUNG(726-7864)
0-2689-3232,
1800-29-3232
0800-32-9999
1800 588 889
800-SAMSUNG (726-7864)
800-SAMSUNG(726-7864)
183-2255 (183-CALL)
8000-4726
800-2255 (800-CALL)
08000-726786
16580
021 36 11 00
0800-Samsung (72678) Web Site
www.samsung.com/au/support
www.samsung.com/nz/support
www.samsung.com/cn/support
www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
www.samsung.com/in/support
www.samsung.com/id/support
www.samsung.com/jp/support
www.samsung.com/my/support
www.samsung.com/ph/support
www.samsung.com/sg/support
www.samsung.com/th/support
www.samsung.com/tw/support
www.samsung.com/vn/support
www.samsung.com/ae/support (English)
www.samsung.com/ae_ar/support (Arabic)
www.samsung.com/eg/support
www.samsung.com/n_africa/support
www.samsung.com/pk/support
TUNISIA
Area
JORDAN
SYRIA
IRAN
MOROCCO
Contact Centre 
80-1000-12 0800-22273
06 5777444
18252273
021-8255
080 100 2255
SAUDI ARABIA
920021230
TURKEY
` Africa
NIGERIA
444 77 11
Ghana
Cote D’ Ivoire
SENEGAL
CAMEROON
KENYA
UGANDA
TANZANIA
RWANDA
BURUNDI
DRC
SUDAN
SOUTH AFRICA
BOTSWANA
NAMIBIA
ZAMBIA
MOZAMBIQUE
0800-726-7864
0800-10077
0302-200077
8000 0077
800-00-0077
7095-0077
0800 545 545
0800 300 300
0685 88 99 00
9999
200
499999
1969
0860 SAMSUNG (726 7864)
8007260000
08 197 267 864
0211 350370
847267864 / 827267864
Web Site
www.samsung.com/n_africa/support
www.samsung.com/Levant/support (English)
www.samsung.com/Levant/support (English)
www.samsung.com/iran/support
www.samsung.com/n_africa/support
www.samsung.com/sa/support
www.samsung.com/sa_en/support (English)
www.samsung.com/tr/support
www.samsung.com/africa_en/support
www.samsung.com/africa_fr/support
www.samsung.com/support
www.samsung.com/support
Download PDF

advertising