- Vehicles & accessories
- Motor vehicle electronics
- Car media receivers
- Boss Audio Systems
- BV9973
- User manual
Boss Audio Systems BV9973 User manual
Add to my manuals35 Pages
The Boss Audio Systems BV9973 is a multimedia player that combines entertainment and functionality. With its versatile disc compatibility, it can play DVDs, VCDs, CDs, and MP3s, offering a wide range of audio and video content. The device features a 9-inch TFT LCD display with adjustable illumination and viewing angles, ensuring a clear and enjoyable viewing experience. It also supports various audio and video formats, including JPEG, MP3, WMA, and MPEG-4.
advertisement
To ensure safety while driving
and to comply with laws,
drivers should not watch video or
operate the video device while driving.
Content
Installation ....................................
5
Electric Connection ......................
7
Remote Control ............................
8
Basic Operation ............................
10
Loading/Ejecting a DISC .................
10
Open/Close Monitor and Angle
Adjustment......................... ........
10
Main Menu Operation......................
11
Setting animation...........................
11
Setting disc....................................
12
Setting radio...................................
12
Setting wallpaper............ ................
12
Version about..................................
12
Setting time.......... .........................
12
Setting audio mode.........................
12
Setting video mode.........................
13
Setting OSD language....................
13
Setting illumination color.................
13
TFT display calibration. ..................
13
Rear View Camera ........................
13
Control Panel ................................
14
Unit keys ........................................
14
Radio Operation............................
17
Listening to the radio ......................
17
Storing and Listening to a memory
station ........................................
17
Automatic Memory Storing &
Program Scanning.......................
18
RDS function..................................
18
Media Operation............................. 20
Basic Operation ..............................
21
Multi-angle Function........................
24
Program function.............................
25
Step function..................................
25
Slow speed function........................
25
SWC Operation..............................
29
Parental Control............................
30
Region Code..................................
31
-1-
Precaution
THANK YOU FOR PURCHASING A BOSS AUDIO MULTIMEDIA PLAYER .
Before operating the unit, read this manual thoroughly and keep it handy
for future reference .
To avoid injury or accident , read the following precautions before
installing and operating the unit .
ON INSTALLATION
DO NOT install any receiver in locations where;
- it may obstruct the steering wheel and gearshift lever operations, as this
may result in a traffic accident.
- it may obstruct the operation of safety devices such as air bags, as this
may result in a fatal accident.
- it may obstruct visibility.
DO NOT operate any receiver while manipulating the steering wheel, as
this may result in a traffic accident.
The driver must not watch the monitor while driving.
IF THE DRIVER watches the monitor while driving, it may lead to
carelessness and cause an accident.
IF YOU NEED to operate the receive while driving, be sure to look ahead
carefully or you may be involved in a traffic accident.
IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the
monitor, and no playback picture will be shown.
- This warning appears only when the parking brake wire is connected to
the parking brake system built in the car ( refer to the electric connection)
ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL
Do not press on the LCD panel on the unit as doing so can distort the
picture or cause a malfunction . The picture may become unclear , or the
LCD panel may be damaged .
NOTES ON CLEANING
-Clean the LCD panel with a slightly damp soft cloth.
-Do not use solvents such as benzine, thinner, commercially available
cleaners or antistatic spray .
-
Do not use alcohol to clean the screen .
If your car was parked in a cold or hot place, the picture may not be clear .
The monitor is not damaged . The picture will become clear the temper-
ature in your car becomes normal .
-2-
Safety Information
CAUTION:
THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER
THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This Digital Video Player is designed and manufactured to respond to the Region
Management Information that is recorded on a Digital Video disc. If the Region
number described on the Digital Video disc does not correspond to the Region
number of this Digital Video Player, this Digital Video Player cannot play this disc.
-3-
Disc Note
Disc formats supported by this player
Digital
Video
VCD
CD
Digital
Video
VCD
CD
Audio and Video
Disc size 12 cm
Audio and Video
Disc size 12 cm
Audio
Disc size 12 cm unusable) depending on your handle it and conditions in the usage environment.
Note these scratches are not an indication of any problem with the player.
Label side up
MP3
MP3
Audio
Disc size 12 cm
Do not touch the underside of the disc
Do not bend
Discs which cannot be played with this player
Digital Video-RAM
CDV
CDG
Wipe the disc from center toward the outside edge
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right. To remove the rough edges, press the s i d e o f t h e pen or pencil against the inside and outside edges of the disc.
Rough spots on outside edge
Rough spots on inside edge
Ball point pen or pencil
Note:
A disc may become somewhat scratched
(although not enough to make it
-4-
Installation
NOTES:
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
30
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded
screw holes at the sides of the unit chassis). For details, refer to the following
illustrated installation methods.
-5-
Installation
Installing the unit
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
HEX NUT
DASH BOARD
METAL MOUNTING
STRAP
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
TABS
SCREWDRIVER
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE
If you want to take the CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC COVER on both sides , then insert the two KEY PLATES into the left and the right sides of the chassis as illustrated above.
-6-
Electric Connection
WIRING CONNECTION
RCH IN RED
AUX2
VIDEO OUT(2) YELLOW
AUX 2 VIDEO IN YELLOW
LCH IN WHITE
REAR OUTPUT CABLE
RCH RED
LCH WHITE
FRONT RCA OUTPUT
CABLE
SUBWOOFER GREY
REAR CAMERA INPUT YELLOW
FRONT RCA RED R
VIDEO OUT YELLOW
FRONT RCA WHITE L
RADIO ANTENNA JACK
ISO CONNECTOR
IGNITION SWITCH(B+)
MEMORY BACK-UP(B+)
GROUND(B-)
AUTO ANTENNA
RED
FUSE
YELLOW
BLACK
BLUE
FRONT
LCH SPK.
WHITE
WHITE/BLACK
FUSE
LIGHT GREEN
KEY GROUND(BLACK)
KEY 1(BROWN)
KEY 2(WHITE)
REAR CAMERA SWITCH
(B-)PARKING BRAKE
GREY
GREY/BLACK
FRONT
RCH SPK.
REAR
LCH SPK.
GREEN
GREEN/BLACK
VIOLET
VIOLET/BLACK
REAR
RCH SPK.
Note:
the ground connection cable (parking brake B-) must be connected in order for pictures to be played back to the monitor. If the cable has not been correctly connected, warning message appears on the monitor.
-7-
Remote Control
2 1
3 19
12
13
14
15
18
16
17
4
36
5
6
7
8
9
10
11
37
20
21
23
22
24
25
26
27
28
30
29
32
31
33
34
35
18. RPT BUTTON
19. ANG BUTTON
20. 10+ BUTTON
21. LANG/L/R/ST BUTTON
22. A-B/CLEAR BUTTON
23. >II BUTTON
24. >>I BUTTON
25. ZOOM BUTTON
26. EQ BUTTON
27. SUBT BUTTON
1. OSD BUTTON
2. PROG BUTTON
3. LOUD BUTTON
4.
5. C LOCK BUTTON
6. ANGLE/MO/ST BUTTON
7. LOC/SLOW BUTTON
8. STOP BUTTON
9. I<< BUTTON
10. SELECT BUTTON
11. VOLUME+/- BUTTONS
12. STEP BUTTON
13. SRC BUTTON
14. MUTE BUTTON
15. BAND BTTON
16. OK BUTTON
17. INT BUTTON
28. POWER BUTTON
29. APS BUTTON
30. MENU BUTTON
31. SETUP BUTTON
32. / / / BUTTON
33. GOTO BUTTON
34. PBC/TITLE BUTTON
35. RDM BUTTON
36. AF BUTTON
37. TA BUTTON
-8-
Remote Control
Preparing the Remote Control
Inserting the Battery
2.Replace the battery Set a new battery property with (+)side up as illustrated
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal receiver).
Operation angle: About 30 degree in each the direction of the front of the IR mark.
Note :
The lithium cell in the battery compartment of remote control has been secured for transport with a plastic . Before initial use please remove this plastic so that the remote control is ready for operation .
-9-
Basic Operation
POWER ON/OFF
Touch the “OFF” ICON on screen
to turn the unit off . Press the“ ”
onthe front panel to turn It on,
press it again to turn off .
LOADING/EJECTING A DISC
Loading a Disc
1. Press the POWER ( ) button on the
front panel to turn the device on .
2. Insert the disc with printed side facing
up into the disc slot (1) .
3. The player starts playback the disc
automatically .
1 2
FIG.2
Adjusting the viewing angle .
When the monitor does not move, you long press button on the panel to turn the monitor upward or downward at fine steps to get a desired viewing angle ; short press that button ( ) on remote is screen move back or out.
Ejecting a Disc
In disc mode, Press the (2) button on
the front panel to eject the disc .
FIG.3
Do not rotate the monitor forcibly to avoid mechanical damage .
OPEN/CLOSE MONITOR AND
ANGLE ADJUSTMENT
Press OPEN button on front panel, the monitor will draw out automatically .
FIG.4
FIG.1
OPEN/CLOSE button
When the monitor draws out to a certain location, it will turn upward automatically and stop at vertical position .
-10-
Return the monitor to the central viewing position, then press OPEN button on the front panel , the monitor will turn downward automatically .
FIG.5
Basic Operation
When the monitor turns downward to a certain angle, it will draw in .
FIG.6
Setup interface 1
Main Menu Operation
In many modes, touch the icon or In DVD/VCD mode , touch the range to enter the main menu, the message like following as below.
Setup interface 2
Touch the “ ” section on the setting menu, touch the “ / ” ranges to select the adjustment item,
Touch the “ ” icon to return to the previous playback .
GENERAL
ANIMATION 2 MINUTE
KEY BEEP ON
(1)
(3) (2) (4)
1. POWER icon
(5) (6)
In any modes, touch the POWER icon
to switch the unit off . The monitor will
draw in automatically .
2. UP icon
Touch this icon to adjust the angle of
the monitor upward until your desired
angle .
3. CLOSE icon
Touch this icon to Close the monitor .
4. DOWN icon
Touch this icon to adjust the angle of
monitor downward until your desired
angle .
5. EJECT icon
Touch to allow for inserting or ejecting
disc.
6. SETUP icon
Touch to enter the SETTING mode,
the message will display as follow :
-11-
RADIO ...
General setup interface1
GENERAL
WALLPAPER ...
ABOUT ...
General setup interface2
ADJUSTABLE ITEMS:
ANIMATION
In RADIO mode, you can change the playing time of animation among of
“OFF, 10S, 30S, 1M,90S, 2M, 3M and 4M ”.
Note:
Please set the playing time of the animation to “ 10S ” for the first, when you turn the unit on .
KEY BEEP : ON or OFF.
Basic Operation
Disc setup as follow:
DISC
FORMAT NTSC
TV TYPE 4:3PS
RATING ADULT
FORMAT
This player is capable of playing discs recorded in either PAL or NTSC formats.
Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select). The disadvantage to autoselect is that each time you turn the unit on it checks to see what kind of monitor is connected, which causes a small delay and some flickering of the display image which you may find unpleasant.
TV TYPE
16:9
4:3 Letter Box
(The password must be used to make changes to the Parental Control menu below .)
Key in “0000” and then turn to rating then you can setting as follow:
KID SAFE -> G -> PG -> PG-13
-> PG R -> R ->NC-17 -> ADULT
RADIO
ST/MONO: touch to select stereo or mono.
LOCAL: touch to select local or distant.
REGION: touch to select radio frequency as USA or EUROPE.
WALLPAPER
Touch to select wallpaper .
ABOUT
Touch to show the version information.
4:3 Pan Scan
CLOCK SETUP
Touch the CLOCK to adjust the time and time format.
This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in LETTER BOX style.
(If connected to wide-screen TV, black bands appear at top and bottom of the screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is connected.
clock setup interface
AUDIO SETUP
Touch the audio to turn to audio quality adjustment.
RATING
Select to turn Parental Control on or off.
The factory default password is 0000.
-12audio setup interface1 audio setup interface2
Basic Operation
TREBLE: -7 to +7
Adjust treble level .
LANGUAGE
Touch to select OSD language.
BASS: -7 to +7
Adjust bass level .
SUBWOOFER: touch to adjust subwoofer volume and frequency.
ILLUMINATION COLOR
Touch to select the backlight for all buttons. Tap auto icon the backlight change automatically.
EQ: touch to select audio mode as follow:
USER -> JAZZ -> CLASSIC -> POP -> ROCK
CALIBRATION
Touch the arrow as show to calibration the display.
LOUDNESS: touch to select loudness effect as :OFF -> LOW -> MID -> HIGH
FADER/BALANCE:
BALANCE: R 0-10 to L 0-10
Reset Factory Settings
Adjust sound balance between left and right speakers .
RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.
FADE: F 0-10 to R 0-10
Adjust sound balance between front and rear speakers .
VIDEO SETUP
RESET
Video setup interface
COLOR: 0 to 32
Adjust the color for the picture-lighter or darker.
BRIGHTNESS: 0 to 32
Adjust if the picture is too bright or too dark.
The RESET button is to be activated for the following reasons:
A. Initial installation of the unit when all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
Rear View Camera
CONTRAST: 0 to 32
Adjust the contrast of the bright and dark portion.
TINT: 0 to 32
Adjust the tint if the human skin color is unnatural.
-Adjustable when “NTSC “ is selected for “NTSC/PAL “ .
-13-
When connecting the rear view camera the mirror image of the rear view is automatically displayed on the monitor when you change the gear to the back position.
(Note: additional monitor can not display the image.)
Control Panel
UNIT KEYS
1
3
7
19
18
2 6 9 8 4 5 10 20 11 12 13 14
15
17
16
1. OPEN BUTTON
To slide the monitor out and stand it up or into the monitor slot, press this button;
To adjust the angle of the monitor, press the 5/ or 6/ to change the angle for
the TFT display.
2.
SEL BUTTON
In normal mode,
and VOL KNOB
the VOL
knob is used to increase or decrease the volume.
Press the SEL(except radio mode) to switch between BASS,TREBLE,
BALANCE, FADE,COLOR,RIGHTNESS, CONTRAST, TINT , REG(in radio mode),
PI(in radio mode), TA(in radio mode), AF(in radio mode), LOUD, SWF, EQ,
TIME 12H/24H, CLOCK,BEEP,EUR/USA FREQ, ANIMATION.
After switching on the desired mode above, rotate VOL knob or press VOL+/
VOL- buttons to set it.
In radio mode, press the SEL to select MANUAL/AUTO mode, in radio manual
mode to scan the frequency by rotate the VOL knob, select radio auto mode to
cancel the scan function.
-14-
Control Panel
3. (POWER On/Off )/MODE
Press it to turn on the unit, Press and hold for two seconds to switch the device off.
In playback mode, Press it repeatedly to select RADIO, DISC, USB, CARD, AUX,
and AV mode.
4 /5. >>| and |<< BUTTONS
In radio mode, long pressing |<< or >>| button can automatically search down
or up for an available station beginning from the current frequency; Briefly
pressing |<< or >>| button can manually search down or up for a your desired
station beginning from the current frequency.
In media mode, pressing |<< or >>| button can play the previous or next track;
continuously and long pressing |<< or >>| button can fast backwards or
forwards at the following multiple of normal speed: x2, x4, x8, x20.
6. EQ BUTTON
In any modes, touch the “EQ” range to select one of the preset sound modes:
USER/JAZZ/CLASSIC/POP/ROCK .
The information will display in the monitor as follow :
USER JAZZ CLASSIC
ROCK
POP
7. MUTE BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE
flashes in the display. Press it again to cancel the mute function. This function
can also be cancelled by rotating the VOL multifunction button.
8. BND BUTTON
In Radio mode, press it repeatedly to select the desired radio band: FM1, FM2,
FM3, AM1(MW1), AM2(MW2) .
9 . RESET BUTTON
Press this button to return to factory settings.
10 . SD CARD SLOT
1
A)In RADIO mode
Go to any preset station by pressing one of the 6preset station(1-6) ,if one of
these buttons is pressed for more than 2 seconds, the stations currently being
listened to will be memorized into the selected preset button.
-15-
Control Panel
B) In DISC/USB/SD mode
During playing, press 1/>II button to pause the current playback, press again to
to continue play;
During playing, press 2/RPT button to select repeat function;
During playing, press 3/RDM button to select random function;
During DVD/VCD/CD disc playing, press 4/STOP button to stop playing and turn
to home mode, during MP3/USB/SD mode, press this button to turn to previous
mode, press again to turn to home mode;
17. AUXILIARY INPUT JACK
Insert an external device to this AUX jack in order to have audio output of the
device through the unit.
18. USB PORT
For information about connecting a USB device, please see USB operation.
19 (EJECT) BUTTON
Insert the disc, label side facing up, until the mechanism senses its presence
and draws the disc in. Press it to eject the disc.
20. LCD Display window
-16-
Touch Screen Operation
RADIO OPERATION
Listening to Radio
Touch the RADIO ICON in home menu
to enter the RADIO mode:
Briefly touch “ ” to decrease frequency by one step of channel spacing.
Automatic Search
During Radio mode, touch and hold
(for more than 2 seconds ) either “ / ”
ICONS to start search for a radio station automatically.
To tune in strong-signal FM
Station only (LO/DX function)
In radio mode, remote control
Press LOC button on the or tap icon to select select LOC/DX mode of Local and
Long-distance traffic news.
Storing and Listening to a
Memory Station
Setting Memory
FM1
87.50
MHz
4
Selecting The Frequency Band
Touch the screen of “ BAND ” section
repeatedly to select the band , the
message will show in turn :
FM1 FM2 FM3
AM2(MW2)
AM1(MW1)
When an FM stereo broadcast is hard to receive
Press ST/MO button on the remote control to select the MONO or STEREO mode .
Start Searching For a Station
Manual Search
During Radio mode, briefly touch “ ” to increase frequency by one step of channel spacing.
-17-
87.50 90.10 98.10
87.50
107.9 100.8
With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>Select the frequency band
>Select the station
>Press and the station until it show
the frequency band your select.
- Retrieve a preset station
Touch the 1-6 ranges briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
Touch Screen Operation
Automatic Memory Storing &
Program Scanning
- the display capacity is limited . It is
possible that in the double display mode
some segments of the display are deleted .
- the function REG ON prevents the
Automatic Preset Setup
In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to
radio from switching to alternative
frequency which have a different regional
program content .
active automatic station storage.
The radio searches within the current
REG OFF : the program identification(PI) stronger signal level until the search cycle
of the regional program is ignored during
the search for an alternative frequency has finished . The six strongest stations
(AF) or a program identification (PI) .
are then allocated to the corresponding storage locations .
Then the station of the first storage location is set .
REG FUNCTION
at certain times some stations divide up
their programs into regional programs
with varying content .
REG ON : the message “REG ON” will
appears in the display for a few seconds .
Note :
RADIO
RDS PI MUTE
RDS TA OFF
RDS AF OFF
Scan Function
In Radio mode, briefly touch the “ ” section on the touch screen , the radio briefly plays all the preset stations of the frequency band .
Select RDS REGIONAL to turn RDS
function on or off.
RDS FUNCTION
In home menu, then touch the “ ”
ICON to enter the set mode, the message in the display :
RADIO
ST/MONO STEREO
LOCAL DX
REGION EUROPE
RDS REGIONAL ON
ADJUSTABLE ITEMS:
REGION SET
Touch to switch the REGION function
ON and OFF.
PI SET
Touch to change between PI MUTE and
PI SOUND .
PI MUTE / PI SOUND
(only for radio operation)
I f you are in an area where two program
identifications (PI) overlap, you can
select the option PI SOUND and
PI MUTE for playback of the sound.
Alternate switching of the program
identification should be avoided .
PI SOUND : sound of another station is heard for
less than one second .
-18-
Touch Screen Operation
PI MUTE : the sound of another station is suppressed .
Touch the AF section on touch screen or
swing and keep the SEL knob in the
TA/AF direction for about 2 seconds ,
the AF function is activated. The AF
symbol appears in the display .
TA Traffic Announcement
(Priority For Traffic Information)
In Radio mode, touch the cursor button to switch the TA function ON and OFF .
When the TA function is activated, the
TA symbol appears in the display .
During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) .
If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up.
When the AF function has been switched
on, the radio continuously tests the
signal strength of the AF frequency .
The test interval for each AF frequency
depends on the signal strength of the
current station and varies from a few
minutes in the case of weak signals.
Whenever the new AF frequency is
stronger than the station that is currently
tuned in , the radio switched to this
frequency for a short time for a short
time and the message
“NEW FREQUENCY “ is displayed for
one or two seconds.
When the TA function is switched on , the FM traffic automatically interrupt
CD operation (the word TRAFFIC appears in the display).
PTY FUNCTION
In Radio mode, touch screen of “PTY”
range to select the Program type .
The volume level is increased to the minimum value for the transmission of traffic announcements.
After the traffic announcements has finished, the program that was previously running is resumed.
PTY Selection of the program type
besides the stations name, some FM
stations also transmit information on the
type of program. This information can
be displayed by your car radio .
Interruption of the TA Function:
If you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode .
AF FUNCTION
(Alternative Frequencies)
In Radio mode, touch the cursor button to switch the AF function ON and OFF .
Examples of such types of program are :
SPORT NEWS POP WEATHER ......
AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations. The radio searches in the background for the best frequency reception of the station that has been tuned into .
-19-
With PTY function you can specifically
select stations transmitting a particular
type of program. Touch the PTY on screen
repeatedly to call up the PTY selection
menu. The message “PTY SEEK” then
appears briefly in the display .
When PTY has been selected the radio
start searching for corresponding PTY
information and stops when the PTY
information has been found, “NO PTY”
appears in the display. If the PTY
information being searched for no longer
exists, the PTY function automatically
switches to normal mode .
Touch Screen Operation
Media Operation
In audio play mode, the message will display as below :
(When Parking Brake is applied .)
To skip the next track
To skip the previous track
Repeat Function
Random Function
Previous menu
The icons for other mode
(The same icon have the same function in each mode)
Mute function
To select the Equalizer mode
Fast forward
Fast backward
Intro Function
To decrease the volume level
To increase the volume level
Loudness Function
Subwoofer Function
Turning pre-switching for traffic announcements on and off
Switching on and off an
Alternative frequency
Play/Pause the playing
-20-
In PHOTO playing ,tap to change
the photo direction.
ZOOM IN and OUT.
For page turning.
For page turning.
For page turning.
For page turning.
For page turning.
Touch Screen Operation
BASIC OPERATION
Stopping Play
Touch the button on remote to stop the unit playback. press the
button to start play.
Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture .
Press UP to invert an image .
Press DOWN to mirror an image .
Press LEFT to rotate an image to left .
Press RIGHT to rotate an image to right .
Pause (still picture)
Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .
SELECTING PLAY MODES
During the Disc playback, select the
“RPT, RDM, INT ” to select your favour play mode.
Rapid Forward/Rapid Reverse
During DISC playback, touch the screen of “ / ” range the speed of rapid forward/reverse changes according to the disc as follow:
1). REPEAT FUNCTION
FOR Digital Video :
Tap the icon or press the RPT button on the remote control to select REPEAT mode as follows :
CHAPT ER REP EAT ON TI TL E REP EAT ON
REP EAT OFF REP EAT ALL
Digital Video/VCD/CD/MP3:
Normal Playback 2x 4x 8x 20x
FOR VCD/CD :
Tap the icon or press the RPT button on the remote control to select REPEAT mode as follows :
Skipping Track
During DISC playback, Touch the
/ section on the touch screen to skip to next/back one track.
REPEAT ONE REPEAT ALL
REPEAT OFF
FOR MP3 :
Tap the icon or press the RPT button on the remote control) to select REPEAT mode as follows :
Note :
For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .
REP EAT ONE REP EAT FO LD ER (or DIR)
REP EAT OFF REP EAT ALL
Zoom Function
2). INTRO FUNCTION
Touch the button repeatedly, the displayshow as “zoom 2,
zoom 3, zoom 4 , zoom ½, zoom 1/3, zoom 1/4 , zoom off . ”
Use the direction keys ( / / / on remote control to move the enlarged picture .
-21-
FOR CD :
Tap the icon or press the INT button on the remote control to play the previous
10 seconds part of each track/chapter on disc.
(Touch it again to cancel this mode)
Touch Screen Operation
T 00 1/004 C 001 /00 1
FOR VCD :
Press the INT button on the remote control. It display will following menu as below :
SEQ PLAY INTR O 1
2. Example for VCD/SVCD, when it is on,
it will display the information such as:
Note: when select the INTRO Mode, this player to start to play the previous
15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .)
FOR Digital Video/MP3 :
For Digital Video/MP3 , press the INT button is not available .
3). RDM(RANDOM) FUNCTION
During DISC playback, touch screen of “ ” section ( press the
RDM button on the remote control to play in random. Each play mode the order is different . (Depend on the disc used for VCD).
Touch it again to cancel this function .
Note : in random mode, the button is not available .
3. Example for Movie or PHOTO .
When it is on, it will display the
information such as:
DISC Search (GOTO)
FOR Digital Video :
Touch the screen as show or press the
GOTO button on remote control;
ON-SCREEN DISPLAY FUNCTION
OSD
During playback, touch the
screen or press the OSD on the
remote control, it will display
the following as below :
Note: touch the screen or press the OSD on the remote control again to cancel the OSD information.
1. Digital Video , when it is on, it will
display the information such as: the screen will display the following message :
-22-
Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
Touch Screen Operation
FOR VCD (With PBC OFF) :
Touch the screen as show or press the
GOTO button on remote control; the screen will display the following message :
Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
For Movie/Photo:
Touch the screen as show or press the
GOTO button on remote control; the screen will display the following message :
Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
-23-
Touch Screen Operation
Digital Video Special Function
1. Multi-subtitle Language
Function (for Digital Video Only)
During Digital Video playback.
Touch the icon on touch
screen(or press the SUBT on
the remote) .
Each time the button is pressed or touch, number of the subtitle language changes in sequential order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded, “ INVALID KEY ” will be
displayed at screen left top corner.
3. Multi-Angle Function
(for Digital Video Only)
During Digital Video playback, touch the
icon on the touch screen .
Each time the button is pressed , the number of the angel changes in sequential order .
Notes:
- The angle number is different
according to the disc.
- The function only work for disc having
scenes recorded at different angles.
- When no different angle are recorded,
“ INVALID KEY ” will be displayed at screen left top corner.
2. Multi-Audio Language Function
For Digital Video:
During Digital Video playback , touch the icon on touch screen (or press the LANG on the remote .) Each time the button is pressed or touch , number of the audio soundtrack language changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack
- When no different language soundtra-
ck are recorded will be
display at screen left top corner.
“ INVALID KEY ”
For VCD/CD:
during playback, touch the AUDIO section of the touch screen or Press
AUDIO on the remote . It is possible to switch the sound between monaural and stereo sound.
4. Title Menu Function
For Digital Video:
If the Digital Video has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.
- During Digital Video playback, press
TITLE button on the remote .The title
menu is display.
- Select preferred title by the cursor
button and confirmed by press the
ENTER button .
For VCD:
Press TITLE/PBC button on the remote control while the disc is playing, you can switch between "PBC ON"and "PBC off" mode.
STEREO
-24-
Touch Screen Operation
5. A-B Repeat
(for Digital Video and VCD)
Press the A-B button if you want to repeat a specific segment on a disc that you define:
1. Press the A-B button at a point (A)
where you want it to be the start point
of the repeat segment. Press the A-B button again at a point (B) where you want it to be the terminal point of the repeat segment. Then it will play the segment repeatedly.
2. To cancel the A-B repeat mode and resume normal playback, press the A-B button for the third time.
Note:
During DVD playback, points A and B can be selected from different chapters.
6. Program Playback
(for Digital Video and VCD)
It allows you to enter the order in which you want some chapters/tracks in
DVD/VCD to play.
1 During playback, press the PROG button to enter a program interface as follows:
3 Use the number button to input desired sequence number of title/ chapter/track with desired sequence.
4 After input your favour, press >II on remote or use the direction buttons to select play and then press OK on remote to play the programmed titles/ chapters/tracks in programmed order.
* Tap the display or press stop button
to exit the PROG .
* During VCD playback, if it is in PBC
ON mode, at the same time of entering the state of program playback, it turns off PBC mode.
7. Display still frame step by step
(for Digital Video and VCD)
If the unit is currently playing video, press the STEP button consecutively to display still frame step by step.
Press the PLAY button to resume normal playback.
8.Playback with Slow Speed
During video playback , press the
LOC/SLOW button to execute the
Slow Forward function.
Press the PLAY button to resume normal playback.
PROGRAM
Program interface for DVD
2 Use the direction buttons to move cursor onto the desired place for inputting the sequence number.
-25-
Touch Screen Operation
AUX Operation
On the front panel of this unit, there is an
AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the RCA
<Video input > on the back of the unit .) .
Use this jack to replay sound of other replay equipment such as Digital Video players, computers, etc. Via the loudspeakers.
1). Please connect the external device with stereo jack (3.5mm)plug the Aux in socket .
AUX IN JACK FRONT PANEL
10:00AM
AUX INTERFACE 1
10:00AM
AUX IN
AUX IN
Ground
Right
Left
2). In radio mode, touch the screen of “ ” ICON to enter the main menu, touch the “ AUX ” ICON to enter the
AUX IN mode .
AUX INTERFACE 2
3). You now hear the sound from the external device played back through the loudspeakers .
The function of the icons as follow:
Tap to mute the sound.
Tap to select EQ as the same on the
remote control.
Tap to turn LOUD on or off.
Tap to select subwoofer frequency.
Tap to adjust audio volume.
Turning pre-switching for traffic
announcements on and off
Switching on and off an
Alternative frequency
-26-
Touch Screen Operation
AV Operation
Please plug the RCA <Video input > on the back of the unit .
Touch the AV IN icon to enter the AV IN mode.
10:00AM
AV INTERFACE 1
10:00AM
As the interface show, here is only the audio output, now tap the icon, the picture of the auxiliary input video show on the display and tap the display again to turn to audio mode.
Now you can watch the video from your
External video equipment such as
Digital Video players, computers, etc.
The function of the icons as follow:
Tap to mute the sound.
Tap to select EQ as the same on the
remote control.
Tap to turn LOUD on or off.
Tap to select subwoofer frequency.
Tap to adjust audio volume.
Turning pre-switching for traffic
announcements on and off
Switching on and off an
Alternative frequency
Note: To ensure safety while driving and
to comply with lows, drivers should
not watch video or operate the
video device while driving.
AV INTERFACE 2
-27-
Touch Screen Operation
USB OPERATION
Following the diagram below, connect
your USB device to the front panel
USB port . If it is properly connected,
the device will be mounted and start
playing automatically.
Card OPERATION
The unit can support playback MP3/WMA/
JPEG/MP4 and Divx format which are stored on SD memory cards .
Please read the following instructions before you start using a memory card .
Inserting the card as follow:
SD
SD Label side facing upward
1
SONG
10:00AM
001
003
004
005
5
1
WEDDING
10:00AM
MOV03247.MPG
CIMG3080.MOV
5
2 3 4
1 Current type (highlighted bar) .
2 Audio play mode select.
3 Picture play mode select.
4 Movie play mode select,
5 Current play track .
2 3 4
1 Current type (highlighted bar) .
2 Audio play mode select.
3 Picture play mode select.
4 Movie play mode select,
5 Current play track .
-28-
Touch Screen Operation
STEERING WHEEL CONTROL
Touch the SWC icon as follow to turn to steering wheel control .
When electric resistance is too
low, touch this icon to increase.
When electric resistance is too
high, touch this icon to reduce.
During setting, touch the icon to turn to home menu.
There are 2 KEY for total 12 buttons to save, first, tap Assign to open function save, then select button 1 in KEY 1 on steering wheel and tap the icon, the icon show in button 1 position then touch
Confirm, final turn the unit on again, the function will save in button 1 of
KEY 1.
The function of the icons as follow:
Touch to begin function save.
After selection touch to confirm
operation.
Touch this icon to cancel the
input and resume load.
-29-
Parental Control
* Parental Control
Q: After inserting a Digital Video disc into the disc slot, if a dialogue box pops up
A: The playing disc is locked by a rating level of parental control. If the current
rating level of parental control of the Digital Video player is lower than the one
of current disc, you must input the correct password of parental control to
unlock the parental control and enter a rating level equal to or higher than of the current disc in order to play the disc.
one
* For factory preset password of parental control of Digital Video player, see the part of Media Setup Menu .
please
Appendix: Parental Control
Parental Control function of a Digital Video player can control playback of
movie ratings on a disc. You can set the Digital Video player to be a certain
rating level of parental control using the Media Setup Menu. If the rating level
of parental control of a disc is higher than the one of the Digital Video player,
the Digital Video player cannot play the disc.
The Digital Video movie can be designed so that the Digital Video player can
play different versions of content of a particular movie according to the different
rating levels of parental control. Depending on the D igital Video features , the
scenes that are not suitable for children will be cleared or replaced by suitable
scenes automatically.
The rating levels of Parental Control are as follows:
Unlock
1 Kid Safe
2 G
3 PG
4 PG 13
5 PG R
6 R
7 NC 17
8 Adult
-30-
Region Code for DVD
* Region Code
If you insert a disc into the disc slot and REGION ERROR is displayed, the car
multi-media system can not play the disc. The reason is that the region codes
of the car multi-media system and the used disc do not match each other.
Appendix: Region code of D igital Video
Motion Picture Association of America (MPAA) divided the world into 6 regions, and
gave every region a region code for locking and unlocking D igital Video playback.
Basically, a coded D igital Video
player can play only the discs if its region code is the same as the code of the igital Video
player. Otherwise, it cannot play the disc.
Please note that only the D igital Video discs and D the 8 biggest film-making companies of America igital Video players produced by impose this restriction.
The D igital
Video discs and D igital Video companies of America are not restricted by the rule of region code. Generally, they are called Free Region Code or Full Region Code.
The problems caused by area code inconsistency
unlocked version D igital Video has motivated the
players and recodable D production of igital Video players .
Region codes and the countries or areas represented by region codes are as follows:
Region 1: America, Canada, East-Pacific Inlands;
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;
Region 3: South-east Asian countries include
Thailand, indonesia, etc.;
Taiwan, Hong Kong, South Korea,
Region 4: Australia, New Zealand, Central South America, South Pacific Inlands;
Region 5: Russia, Mongolia, Indian Peninsula, Middle Asia, East Europe, North
Korea, North Africa, North-west Asia etc.;
Region 6: China mainland.
1. WarnerBros;
2. Columbia;
3. 20thCenturyFOX;
4. Paramount;
5. Universal;
6. UA(UnitedArtist);
7. MGM(MetroDogwynMayer);
8. WaltDisney
-31-
Specification
General :
Supply Voltage: 12V DC (11V-15V)
Current Consumption: Less than10 A
Signal System: Compositive video 1.0Vp-p 75
Discs Played: (1)DIGITAL-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
Audio Signal Output: 2ch&4ch line out
Characteristics: (1)Frequency Response 20 Hz - 20 KHz
(2)S/N Ratio 90 dB (JIS)
(3)Wow and Flutter Below measurable limits
RADIO Section:
For 2 Bands For 2 Bands
(Europe) (U.S.A.)
FM FM
Frequency Coverage: 87.5 to108 Mhz 87.5 to107.9 Mhz
IF: 10.7 MHz 10.7 MHz
Sensitivity (S/N = 30 dB): 15 dBu 15dBu
MW AM
Frequency Coverage: 522 to1620 KHz 530 to1710 KHz
IF: 450 KHz 450 KHz
Sensitivity (S/N = 20 dB): 40 dBu 40 dBu
TFT Monitor:
Monitor Screen Size: 7 Inch Wide
Color System: NTSC/PAL
NOTE:
Specifications and design are subject to modification, without notice, due to improvements in technology.
-32-
Troubleshooting
Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.
No power
Disc can not be loaded or ejected
The car ignition switch is not on
The fuse is blown
If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC"
Replace the fuse
Presence of disc inside the player.
The disc is extremely dirty or defective
Remove the disc in the player, then put a new one
Inserting the disc in reverse direction
Insert the compact disc with the label facing upward
Clean the disc or try to play a new one
Temperature inside the car is too high
Cool off or until the ambient temperature return to normal
Video/image appears black-white
The color system is set incorrectly
Please switch to correct color system from menu
The unit is not connected to the parking brake detection switch
Make proper connection
No video/image appears
The parking brake is not engaged
For safety reasons no video/ images are displayed while the vehicle is moving.
Engaging the parking brake will cause images to be displayed.
according to the TV-set
used (PAL/NTSC)
Please choose a proper color system.
JPEG disc can not be played back
The operation keys do not work
The radio does not work
No JPEG files are recorded on the disc.
Change the disc
JPEG files are not recorded in a compliant format
The built-in microcomputer is not operating properly due to noise
The antenna cable is not connected
Change the disc Record JPEG files using a compliant application
Press the RESET button.
Front panel is not properly fixed into its place
Insert the antenna cable firmly
The signals are too weak
Select a station manually
Made in China 88-J8200-06
-33-
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project