DVD Video Player Operations
English
DVD Video Player Operations
Changing DVD system settings
Owner’s manual
Notes:
• If the SETUP operation is performed in the middle
of video CD/DVD video play, the disc plays from
the beginning.
• Various settings of the SETUP menu cannot be
made with the remote control unit.
●When watching through a conventional
type of the rear view monitor (4:3)
• N PS : The leftmost and rightmost areas of
the screen are cut off.
Selecting the DVD SETUP menu
1. Press and hold the [ADJ] button for 1 second
or longer. DVD SETUP stand-by screen is
displayed.
2. Press the [STOP] key to display the DVD
SETUP menu.
3. Touch the [ ] key. Touch the [
turn to the previus menu.
] key to re-
This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed while being
panned (scrolled).
• N LB : A black zone is created in the top and
bottom areas of the screen.
This method displays Cinema Scope and
Vista Vision images without cutting them off
by creating a black zone on the top and bottom gaps.
●When watching through a wide type of the
rear view monitor (16:9)
• WIDE:
4. Touch the [RTN] key to return the previous
mode.
3. Touch the [RTN] key to return previous
mode.
Setting up the screen size
Setting up the angle mark display
Set up the screen size according to the rear
view monitor which is connected to this unit.
1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [TV DISPLAY] key.
2. Touch the [N PS], [N LB] or [WIDE] key to
select a desired size to set it.
∗ The factory default setting is “N PS”.
The color of the selected item changes.
You can set up so that the angle mark appears
on scenes where the angles can be switched.
1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [ANGLE] key.
2. Touch the [ON] or [OFF] key to select “ON” or
“OFF”.
∗ The factory default setting is “OFF”.
3. Touch the [RTN] key to return previous
mode.
Setting up the disc menu language.
1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [MENU LANGUAGE] key.
28
VRX935VD
2. Touch the key to select a desired language to
set it.
∗ The factory default setting is “ENGLISH”.
Setting up the audio language
1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [AUDIO LANGUAGE] key.
2. Touch the key to select a desired language to
set it.
Set up the country number for setting up of the
parental level.
1. Following the steps 1 to 3 in “Selecting the
DVD SETUP menu”, touch the [PARENTAL
LOCALE] key.
2. Touch the ten-key(0 to 9) to input a 4-digit
country code.
∗ The factory default setting is “8583”(U.S.A).
∗ The factory default setting is “ENGLISH”.
3. Touch the [RTN] key to return previous
mode.
Setting up the subtitle language
1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [SUB TITLE
LANG.] key.
2. Touch the key to select a desired language to
set it.
∗ The factory default setting is “OFF”.
3. Touch the [RTN] key to return previous
mode.
Setting up the password for setting
up of the parental level
1. Following the steps 1 to 2 in “Selecting the
DVD SETUP menu”, touch the [PASSWORD] (password) key.
2. Touch the ten-key(0 to 9) to input a 4-digit
password.
∗ The factory default setting is “0000”.
• Input an old password, and touch the [ENT]
key.
• Input a new password, and touch the [ENT]
key.
3. Touch the [RTN] key to return previous
mode.
Note:
When a disc with view limited is played
When a disc with view limited is played, the input
screen requiring you to input the password may
appear. When this happens, enter the correct
password, otherwise play does not start.
3. Touch the [ENT] key.
4. Touch the [RTN] key to return previous
mode.
Setting up the parental level
You can change the level of parental lock (audio-visual restriction).
This function allows cutting scenes that are unfavorable for children or replacing them automatically with other scenes prepared in advance. For example, by replacing scenes of radical violence or portrayals of sex with safe
scenes, you can make a trouble-free story as if
it were so from the beginning.
1. Following the steps 1 to 3 in “Selecting the
DVD SETUP menu”, touch the [PARENTAL
LEVEL] key.
2. When you touch the [w] or [z] key, PASSWORD input screen is displayed.
3. Touch the ten-key(0 to 9) to input a 4-digit
password, and touch the [ENT] key.
∗ The factory default setting of the password is
“0000”.
4. Touch the [w] or [z] key to select level 1 to
8, or 0 (no parental).
∗ The factory default setting is “8”.
VRX935VD
29
Owner’s manual
3. Touch the [RTN] key to return previous
mode.
Setting up the country code
English
DVD Video Player Operations
English
DVD Video Player Operations
Owner’s manual
The relationship between DVD video category
codes and parental level are shown in the table
below. Use this table when setting the parental
level.
LEVEL7
LEVEL6
LEVEL4
LEVEL3
LEVEL1
NC-17
(NO ONE 17 AND UNDER ADMITTED)
R
(RESTRICTED)
PG-13
(PARENTS STRONGLY CAUTIONED)
PG
(PARENTAL GUIDANCE SUGGESTED)
G
(GENERAL AUDIENCES)
• The contents that the parental level restricts varies with the country code.
Basic Operations
Loading a disc
Insert a disc into the centre of the insertion slot
with the label side facing up. The disc plays automatically after loading.
Notes:
• Never insert foreign objects into the disc insertion
slot.
• If the disc is not inserted easily, there may be another disc in the mechanism or the unit may require service.
Loading 8 cm discs
∗ No adapter is required to play an 8 cm disc.
∗ Insert the 8 cm disc into the centre of the insertion slot.
CAUTION
With the screen open, a driver may not see the
disc insertion slot. For your safety, insert a disc
with the screen closed.
Watching/Listening to a disc
already inserted
1. Press the [FUNC] button to select the DVD
mode. Play starts automatically. If no disc is
loaded in the unit, “NO DISC” appears in the
display.
WARNING
• Videos may be played back with particularly loud sound. Increase the volume
gradually from the minimum after the
video images are displayed.
• For your safety, the driver should not
watch the video or operate the controls
while driving. Please note that watching
and operating the video while driving are
prohibited by law in some countries.
Notes:
• For your safety, the VRX935VD has a safety function which turns off the picture when the car is
moving, so only the audio can be heard. The picture can only be watched when the car is stopped
and the parking break is applied.
Pausing play
1. Press the [s] button to pause play.
“PAUSE” appears in the display.
2. To resume disc play, press the [s] button
again.
30
VRX935VD
Ejecting a disc
1. Press the [Q] button a disc ejects. “EJECT”
appears in the display.
Sub KEY PAD operation
Owner’s manual
∗ If a disc (12 cm) is left in the ejected position
for 15 seconds, the disc is automatically reloaded. (Auto reload)
∗ 8 cm discs are not auto reloaded. Be sure to
remove it when ejected.
Note:
• If you force a disc into before auto reloading, this
can damage the disc.
∗ The KEY PAD is not displayed in the menu screen
while you are driving a car.
Show the menu screen
1. Touch the screen to show the menu screen
while the main screen is being shown.
∗ To return to the main screen from the menu
screen, touch the [RTN] key.
KEY PAD operation
1. Press the [KEY PAD] button.
Each time the button is pressed, the KEY PAD
changes as follows.
° In DVD video mode
Cross KEY PAD(Å, Î, w, z)
Ten KEY PAD(0 - 9)
Sub KEY PAD
(selection keys such as P.TIME)
KEY PAD OFF
° In video CD mode
Ten KEY PAD(0 - 9)
Cross KEY PAD(Å, Î, w, z)
Sub KEY PAD
(selection keys such as P.TIME)
KEY PAD OFF
Notes:
∗ The KEY PAD displayed in the DVD video mode
always starts from the “Cross KEY PAD” when
the mode is engaged.
∗ The KEY PAD displayed in the video CD mode always starts from the “Ten KEY PAD” when the
mode is engaged.
∗ Use either the “Cross KEY PAD” or the “Ten KEY
PAD” according to the disc contents menu displayed in DVD video/video CD mode.
∗ Only the sub KEY PAD is displayed while you are
driving a car.
●Enter the title number or some other information to select directly
1. Touch the [SRCH] key to switch the KEY PAD.
2. Touch the [0]-[9] key that corresponds to the
title number you desired. When you touch the
wrong number ([0]-[9] key), you can cancel
the key input by touching the [DEL] key.
• DVD video mode: select the title number.
• Video CD mode (with the PBC function
turned off): select the track number.
• CD mode: select the track number.
• MP3 mode: select the file (track) number.
3. Touch the [ENT] key.
The specified title number is selected and
playback starts.
●Function of the other keys
• In DVD video mode
To turn on/off the play time indication, touch
the [P.TIME] key.
To switch the playtime, touch the [P.TIME] key
for 1 second or longer.
To perform title repeat, touch the [T.RPT] key.
To perform chapter repeat, touch the [C.RPT] key.
To perform chapter scan, touch the [C.SCN] key.
To switch the subtitles, touch the [SUBTTL] key.
To switch the language, touch the [AUDIO] key.
To switch the angle function, touch the
[ANGLE] key.
• In video CD mode:
To turn on/off the play time indication, touch
the [P.TIME] key.
To switch the playtime, touch the [P.TIME] key
for 1 second or longer.
To perform track repeat, touch the [T.RPT] key.
VRX935VD
English
DVD Video Player Operations
31
English
DVD Video Player Operations
Owner’s manual
To perform track scan, touch the [T.SCN] key.
To perform track random, touch the [T-RDM] key.
To turn on/off Play Back Control function,
touch the [PBC] key.
To switch the language, touch the [AUDIO] key.
• In CD mode:
To switch the playtime, touch the [P.TIME] key
for 1 second or longer.
To perform track repeat, touch the [T.RPT] key.
To perform track scan, touch the [T.SCN] key.
To perform track random, touch the [T.RDM] key.
• In MP-3 mode:
To switch the playtime, touch the [P.TIME] key
for 1 second or longer.
To perform folder repeat, touch the [F.RPT] key.
To perform folder scan, touch the [F.SCN] key.
To perform folder random, touch the [F.RDM] key.
To perform file (track) repeat, touch the
[T.RPT] key.
To perform file (track) scan, touch the [T.SCN] key.
To perform file (track) random, touch the
[T.RDM] key.
• To return to the STANDARD screen, touch
the [OFF] key.
2. To cancel to the DVD menu, press the
[MENU] button again.
∗ To select the menu contents, press the [KEY
PAD] button and use either the “Cross KEY
PAD” or the “Ten KEY PAD” according to the
disc contents menu.
Switching KEY PAD position
When the KEY PAD becomes difficult to view in
the menu display, you can move it to the other
side of the screen.
KEY PAD
DVD Video Operations
Watching a DVD-Video
After disc loading, the play mode is automatically engaged.
• Button operation may not be allowed depending on the story of the disc.
●After the menu screen is displayed
For normal DVD-Video discs, the menu screen
appears.
After the menu screen is displayed, select an
item in the following operations and play it back.
Showing the DVD menu
1. Press the [MENU] button during playback.
The DVD menus appears.
The displayed contents may differ, depending
on the DVD software.
• Example showing menu display
32
VRX935VD
KEY PAD
Stopping playback
1. Press and hold the [s] button for 1 second
or longer during playback. Playback stops.
2. To resume playback. Press the [s] button,
and playback resumes from the scene where
playback is stopped.
Pausing playback
Searching with a chapter/title
number
Slow playback
1. Press the [s] button then press and hold
the [d] button. While the button is being
pressed, slow playback continues at the
speed 1/2 times the normal playback.
• Slow playback cannot be performed in the
backward direction. In addition, audio cannot be reproduced during slow playback.
Skipping a chapter (searching)
About chapter
Chapter means a small segment to divide the
data area of the disc.
1. Press the [a] or [d] button during playback.
Chapters are skipped, as many as the times
the button is pressed, and playback starts.
or
Chapter
down
• The fast forward and fast rewind speed
may differ depending on the disc.
• The menu screen may appear when the
button is pressed.
Current
location
Chapter
or
Chapter
up
• Press the [d] button, and playback starts
from the beginning of the next chapter.
• Press the [a] button, and playback starts
from the beginning of the current chapter.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous chapter.
• The unit may return to the menu screen
when the [d] button or [a] button is
pressed.
Fast forward and fast backward
1. Press and hold the [a] button or [d] button
during playback.
Press and hold the button, and the playback
speed becomes 4-time faster first and then
16-time faster 3 seconds later. Release the
button, and the normal speed is restored.
• No audio is reproduced during fast forward
and fast rewind operation.
You can locate the beginning of the scene using
the chapter numbers or title numbers recorded
on the DVD-Video disc.
1. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
2. Touch the [SRCH] key.
Each time you touch the [SHIFT] key, you
can switch between title number input “[T**]”
and chapter number input “[C***]”.
• Title
A large segment to divide the data area of
the disc.
• Chapter
A small segment to divide the data area of
the disc.
2. Input the number of the title that you want to
play back with the [0] to [9] key.
3. Touch the [ENT] key.
Playback starts from the scene of the input
title number or chapter number.
• If the input title number does not exist or
searching with a title number is not allowed, the following message appears to
invalidate the input.
Scan playback
Scans and plays back all chapters recorded on
the DVD-Video, the first 10 seconds for each.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [CHAPTER SCAN] key, then touch
the [RTN] key.
After scan playback of all chapters on the
disc, chapter scanning through the same
disc is performed again.
Depending on the disc, the menu may appear again after scan playback of all chapters within the title.
3. Touch the [CHAPTER SCAN] key again,
and scan playback is turned off.
VRX935VD
33
Owner’s manual
1. Press the [s] button during playback.
Playback pauses.
2. To resume playback. Press the [s] button,
and playback resumes.
English
DVD Video Player Operations
English
DVD Video Player Operations
Repeat playback
Owner’s manual
This operation plays back chapters/titles recorded on the DVD-Video repeatedly.
●Chapter repeat:
Plays back one chapter repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [CHAPTER REPEAT] key, then
touch the [RTN] key.
3. Touch the [CHAPTER REPEAT] key, repeat
playback is turned off.
●Title repeat:
Plays back all chapters within the title repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TITLE REPEAT] key, then touch
the [RTN] key.
3. Touch the [TITLE REPEAT] key, repeat playback is turned off.
TOP function
The TOP function resets the DVD player to the
first chapter of the track.
1. Press the [BND] button to playback the first
chapter(chapter No. 1).
Using the title menu
On DVD discs containing two or more titles, you
can select from the title menu for playback.
1. Press and hold the [MENU] button for 1 second or longer during playback.
The title menu screen appears.
• Press the [MENU] button, and playback resumes from the scene played back before
[MENU] button is pressed.
• Depending on the disc, the title menu cannot be called.
2. Touch the [w], [z], [Å] or [Î] key to select
the item.
• Depending on the disc, items cannot be
selected with the ten-key buttons.
3. Touch the [ENT] key.
1. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
2. Touch the [AUDIO] key during playback.
Each time you touch the key, you can switch
among audio languages.
• Depending on the disc, up to 8 audios may
be recorded. For details, see the mark of
the disc ( 8 : Indicates that 8 audios have
been recorded).
• When the power is turned on and when the
disc is changed with a new one, the language set at the time of factory shipment is
selected. If that language has not been recorded, the language specified on the disc.
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
• It may take time to switch among audios.
Switching subtitles
On DVD discs in which two or more subtitle languages have been recorded, you can switch
among the subtitle languages during playback.
1. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
2. Touch the [SUB TTL] key during playback.
Each time you touch rhe key, you can switch
among subtitles.
• Depending on the disc, up to 32 kinds of
subtitles may be recorded. For details, see
the mark of the disc ( 8 : Indicates that 8
kinds of subtitles have been recorded).
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
• It may take time to switch among subtitles.
●To turn off subtitles
1. Touch the [SUB TTL] key several times, and
subtitles are turned off.
In initial setting:
Off
Subtitle 1
Subtitle 2
Subtitle X
Switching among languages
On discs in which two or more audios or audio
languages have been recorded, you can switch
among the audio languages during playback.
34
VRX935VD
Switching angles
• Depending on the disc, angles may switch
smoothly or switch with a momentary still
image.
• When the power is turned on and when the
disc is changed with new one, the language set at the time of factory shipment is
selected. If that language has not been recorded, the language specified on the disc.
• Depending on the disc, switching may be
completely impossible or impossible on
some scenes.
• It may take time to switch among angles.
• Depending on the disc, scenes recorded in
two or more angles may be played back.
Displaying the playback status
1. Press the [DISP] button or touch the
[P.TIME] key in the sub KEY PAD display
(using the procedures described in the section “KEY PAD operation”) during playback.
Each time you press the button or touch the
key, you can switch between display (ON)
and non-display (OFF) of the playback status.
• Depending on the playback status or disc,
the following indication may appear.
Each time you touch the key for about 1 second or longer, you can switch among time
display.
TITLE ELAPSED
CHAPTER REMAIN
TITLE REMAIN
CHAPTER ELAPSED
• CHAPTER ELAPSED:
Elapsed time of the chapter
• CHAPTER REMAIN:
Remaining time of the chapter
• TITLE ELAPSED:
Elapsed time of the title
• TITLE REMAIN:
Remaining time of the title
Owner’s manual
On DVD discs in which video images have been
recorded in two or more angles, you can switch
among the angles during playback.
1. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
2. Touch the [ANGLE] key during playback.
Each time you touch the key, you can switch
among angles.
• Depending on the disc, up to 9 angles may
be recorded. For details, see the mark of
: Indicates multi-angle).
the disc (
Watching a video CD
After disc loading, the play mode is automatically engaged.
• Button operation may not be allowed depending on the story of the disc.
■ After the menu screen is displayed
For V-CD discs equipped with the PBC (Play
Back Control) function, the menu screen appears. After the menu screen is displayed, select
an item in the following operations and play it
back.
Showing the V-CD menu (for V-CD
discs with PBC)
This key does not function on some discs.
1. Press the [MENU] button during playback.
The V-CD menu appears.
The displayed contents may differ, depending
on the V-CD software.
• Example showing menu display
∗ To select the menu contents, press the [KEY
PAD] button and use either the “Cross KEY
PAD” or the “Ten KEY PAD” according to the
disc contents menu.
VRX935VD
English
DVD Video Player Operations
35
English
DVD Video Player Operations
Owner’s manual
Stopping playback
Fast forward and fast backward
1. Press the [s] button for 1 second or
longer during playback. Playback stops.
●When the PBC is turned on
Resume playback
When the Play/pause [s] button is pressed,
the disc plays from the beginning.
●When the PBC is turned off
To resume playback, press the [s] button,
and playback resumes from the scene where
playback is stopped.
1. Press and hold the [a] button or [d] button
during playback.
Press and hold the button, and the playback
speed becomes 4-time faster first and then
16-time faster 3 seconds later. Release the
button, and the normal speed is restored.
• No audio is reproduced during fast forward
and fast rewind operation.
• The unit may return to the menu screen
when the button is pressed.
Searching with a track number
Pausing playback
1. Press the [s] button during playback.
Playback pauses.
2. To resume playback, press the [s] button,
and playback resumes.
Slow playback
1. Press the [s] button then press and hold
the [s] button.
While the button is being pressed, slow playback continues at the speed 1/2 times the
normal playback.
• Slow playback cannot be performed in the
backward direction. In addition, audio cannot be reproduced during slow playback.
This operation allows searching with the track
numbers recorded on the video CDs.
1. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
2. Touch the [SRCH] key.
3. Input the number of the track that you want
to play back with [0] to [9] key.
4. Touch the [ENT] key.
Playback starts from the scene of the input
track number.
• If the input track number does not exist or
searching with a track number is not allowed, the following message appears to
invalidate the input.
Skipping a track (searching)
1. Press the [a] or [d] button during playback.
The track is skipped and playback starts.
or
Track
Backward
direction
Current
location
Track
or
Track
Playback
direction
• Press the [d] button, and playback starts
from the beginning of the next track.
• Press the [a] button, and playback starts
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
∗ This operation cannot be performed on some
discs with PBC.
36
VRX935VD
∗ If you are playing a disc with PBC and the
PBC function is engaged, this operation may
not be performed.
Changing audio output
You can change the audio output method.
1. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
2. Touch the [AUDIO] key during playback.
Each time you touch the key, you can switch
among audio output methods.
LL (Left)
RR (Right)
LR (Stereo)
Other various play functions
1. Touch the screen, the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
Displaying the playback status
1. Press the [DISP] button during playback.
Each time you press the button, you can
switch between display (ON) and non-display
(OFF) of the playback status.
• Depending on the playback status or disc,
the following indication may appear.
2. Display the sub KEY PAD using the procedures described in the section “KEY PAD
operation”.
3. Touch the [P.TIME] key during playback.
Each time you touch the key, you can switch
among time display.
TRACK ELAPSED
TRACK REMAIN
Note:
• Depending on some discs, the [P.TIME] indication
may not be displayed on some scenes. Also, it
may occur that the P.TIME operation does not
work. When this happens, the indication
"INVALID" will appear.
On/off of Playback Control
∗ This function is enabled only using the remote
control unit.
∗ The factory default setting is “ON”.
On video CDs equipped with Play Back Control
function, you can turn it on/off.
1. Press the [PBC] button on the remote control
unit.
Each time you press the button, you can
switch between on and off.
When the PBC is turned on or off, the disc
plays from the beginning.
●Playback control (PBC)
This control signal is recorded on a Video CD for
version 2.0 and used to control playback. Using
pre-recorded menu screens in the Video CD
with PBC, you can enjoy playback of software
with a simplified dialog function or software with
search function. You can also enjoy a still picture
at high or standard resolution.
●When PBC is on
If one of the following operations is done, the
disc plays from the beginning.
When the [FUNC] button is pressed to switch to
some other mode, and the DVD player mode is
returned again.
When the [s] button is pressed to play the
disc again after play is stopped by pressing and
holding the [s] button for 1 second or longer.
When the ACC switch of a car is turned on/off.
Listening to a CD
∗ This unit is a CD TEXT compatible model.
This unit supports the display of the DISC
TITLE, TRACK TITLE and ARTIST of the CD
TEXT.
After disc loading, the play mode is automatically engaged.
Note:
This unit supports only CD TEXT in English. Also,
some character data may not be reproduced properly on the display.
Pausing playback
1. Press the [s] button during playback.
Playback pauses.
2. To resume playback, press the [s] button,
and playback resumes.
VRX935VD
37
Owner’s manual
3. Touch the touch key of the function you want
to play.
●[TRACK SCAN]
This operation scans and plays back all tracks
on the disc, the first 10 seconds for each.
“TRACK SCN” will appear in the screen during
play.
●[TRACK REPEAT]
This operation plays back one track recorded on
the video CD repeatedly.
“TRACK RPT” will appear in the screen during
play.
●[TRACK RANDOM]
This operation plays back all tracks on the disc
in no particular order.
“TRACK RDM” will appear in the screen during
play.
4. To cancel play, touch the touch key again.
• To return to the original screen, touch the
[RTN] key.
If you are playing a disc with PBC and the
PBC function is engaged, this operation can
not be performed.
English
DVD Video Player Operations
English
DVD Video Player Operations
Skipping a track (searching)
Owner’s manual
1. Press the [a] or [d] button during playback.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Press the [d] button, and playback starts
from the beginning of the next track.
• Press the [a] button, and playback starts
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
TOP function
The TOP function resets the DVD player to the
first track of the disc.
1. Press the [BND] button to playback the first
track (track No. 1).
Fast forward and fast backward
1. Press and hold the [a] button or [d] button
during playback.
Press and hold the button, and the playback
speed becomes 4-time faster first and then
8-time faster 3 seconds later. Release the
button, and the normal speed is restored.
Searching with a track number
This operation allows searching using the track
numbers recorded on the CDs.
1. Press the [KEY PAD] button and toch the
[SRCH] key.
2. Input the number of the track that you want
to play back with [0] to [9] key.
3. Touch the [ENT] key.
Playback starts from the scene of the input
track number.
• If the input track number does not exist or
searching with a track number is not allowed, the following message appears to
invalidate the input.
Scan playback
This operation scans and plays back all tracks
recorded on the disc, the first 10 seconds for
each.
1. Touch the screen and touch the [SUB
MODE] key.
38
VRX935VD
2. Touch the [TRACK SCAN] key, then touch
the [RTN] key.
Touch the [TRACK SCAN] key again, and
scan playback is turned off.
Repeat playback
This operation plays back tracks recorded on
the CD repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TRACK REPEAT] key, then touch
the [RTN] key.
Touch the [TRACK REPEAT] key again, and
repeat playback is turned off.
Random playback
This operation plays back all tracks on the disc
in no particular order.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TRACK RANDOM] key, then
touch the [RTN] key.
Touch the [TRACK RANDOM] key, and random playback is turned off.
Changing the display of the
playback status
1. Press the [KEY PAD] button and touch the
[P.TIME] key for 1 second or longer during
playback.
Each time you touch the key, you can switch
among time display.
TRACK ELAPSED
TRACK REMAIN
Displaying CD titles
This unit can display title data for CD-text CDs.
∗ This function is enabled only when the panel is open.
1. Press the [DISP] button.
Disc title, track title and artist title are displayed. Press the [DISP] button again to return to the previous mode.
Listening to an MP3
This unit is a ID3 Tag compatible model.
This unit supports the title, artist and album display of the ID3 Tag versions 1 and 1.1.
After disc loading, the play mode is automatically engaged.
What is MP3?
Precautions when creating an MP3 disc
●File extensions
1. Always add a file extension “.MP3” or “.mp3”
to an MP3 file by using single byte letters. If
you add a file extension other than specified
or forget to add the file extension “.MP3” or
“.mp3”, the file cannot be played. In addition,
if you use upper case and lower case letters
(capital and small letters) mixedly for file extensions, normal play may not be possible.
2. Files without MP3 data will not play.
●Logical format (File system)
1. When writing an MP3 file on a CD-R disc,
please select “ISO9660 level 1 or level 2
(without including expansion format)” as
the writing software format. Normal playback
may not be possible if the disc is recorded on
another format.
2. The folder name and filename can be displayed as the title during MP3 play but the
title must be within 31 and 27 single byte alphabetical letters and numerals for the folder
name and filename, respectively (without including an extension). Entering more letters
or numerals than specified may cause an incorrect display.
●Folder structure
1. A disc with a folder having more than 8 hierarchical levels will conflict with the ISO9660
and playback will be impossible.
●Number of files or folders
1. A total of 255 files and folders are allowed.
(However, the maximum number of folders
must be within 254.) When the number of files
and folders is more than 256, playback of
tracks in excess of that number is impossible.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not always be played in the order displayed on the
PC.)
• Some noise may occur depending on the
type of encoder software used while recording.
• Files created using LAME (Lame Aint MP3
Encoder) may not be played properly.
• In case of a track recorded at VBR (variable bit rate), the display for the play time
of the track may be slightly different from
the actual play time. Also, the recommended value of VBR ranges from 64 kbps
to 320 kbps.
• Depending on the damage conditions of a
file, it may occur that the file is not played
and the next file is played instead. Also, if
the damage is in a severe condition, play
stops showing the “DISC ERROR” display.
After disc selection, the play mode is automatically engaged.
Note:
If ID3 Tag information was entered with 2-byte characters, it may occur that the characters are not reproduced properly on the display.
Pausing playback
1. Press the [s] button during playback.
Playback pauses.
2. To resume playback,press the [s] button
again, and playback resumes.
Skipping a track (searching)
1. Press the [a] or [d] button during playback.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Press the [d] button, and playback starts
from the beginning of the next track.
• Press the [a] button, and playback starts
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
∗ This operation skips the track over the folder.
VRX935VD
39
Owner’s manual
MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
This MP3 features the original audio data compression to about 10 percent of its initial size
with a high sound quality. This means that about
10 music CDs can be recorded on a CD-R disc
or CD-RW disc to allow a long listening time
without having to change CDs.
Note:
• Some CDs recorded on CD-R mode may not be
usable.
English
DVD Video Player Operations
English
DVD Video Player Operations
Fast forward and fast rewind
Owner’s manual
1. Press and hold the [a] button or [d] button
during playback.
Press the button, and the playback speed
becomes 4-time faster first and then 8-time
faster 3 seconds later. Release the button,
and the normal speed is restored.
Selecting a file (track) on the screen
1. Press the [MENU] button during playback.
Files (track) are displayed.
2. Touch the [w] or [z] key to select a file and
touch the [ENT] key.
3. Touch the [RTN] key to select a folder. The
folder selection screen appears.
4. Touch the [w] or [z] key to select the folder
and touch the [ENT] key. The file selection
screen is returned.
∗ If no further operation is performed for 7 seconds, the STANDARD screen is returned.
Playback by selecting a folder and
file (Direct select mode)
This operation allows searching using the folder
and file (track) numbers recorded on the MP3
disc.
1. Press the [KEY PAD] button and toch the
[SRCH] key.
Each time you touch the [SHIFT] key, you
can switch between “T000” for file (track)
number input and “F000” for folder number
input.
2. Input the number for the file (track) or folder
that you want to play back with [0] to [9] key.
3. Touch the [ENT] key.
When you select the folder number playback
starts from Track 1 of the input folder number.
When you are searching for some other
folder and track while a file is being played,
pressing the [MENU] button will return to the
file being played.
Searching a desired file
(Track scan playback)
●About file scan playback
This operation plays back all files recorded on
the disc, about 10 seconds for each.
40
VRX935VD
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TRACK SCAN] key, then touch
the [RTN] key.
The monitor displays “TRACK SCN”. Scan
playback starts from the next file.
3. To cancel file scan playback, touch the
[TRACK SCAN] key again. The playback status indication “TRACK SCN” goes off from
the monitor and the file currently being
played back continues.
Searching for a desired folder
(Folder scan playback)
This operation plays back the first files of all
folders on the MP3 disc, about 10 seconds for
each.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [FOLDER SCAN] key, then touch
the [RTN] key.
The monitor displays “FOLDER SCN” and
folder scan playback starts.
• Scan playback starts from the first file of
the next folder to the one currently being
played back.
3. To cancel folder scan playback, touch the
[FOLDER SCAN] key again. The playback
status indication “FOLDER SCN” goes off
from the monitor and the file currently being
played back continues.
Listening to one file repeatedly
(Track repeat playback)
This operation plays back the file currently being
played back repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TRACK REPEAT] key, then touch
the [RTN] key. The monitor displays “TRACK
RPT” and file repeat playback starts.
3. To cancel file repeat playback, touch the
[TRACK REPEAT] key again. The playback
status indication “TRACK RPT” goes off from
the monitor and the file currently being
played back continues in normal playback.
Changing the display of the
playback status
This operation plays back files in an MP3 folder
repeatedly.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [FOLDER REPEAT] key, then
touch the [RTN] key. The monitor displays
“FOLDER RPT” and folder repeat playback
starts.
3. To cancel folder repeat playback, Touch the
[FOLDER REPEAT] key again.
The playback status indication “FOLDER
RPT” goes off from the monitor and the file
currently being played back continues in normal playback.
1. Press the [KEY PAD] button and touch the
[P.TIME] key for 1 second or longer during
playback.
Each time you touch the key, you can switch
among time display.
Listening to files in a random order
(Track random playback)
This operation plays the files in the folder in a
random order.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [TRACK RANDOM] key, then
touch the [RTN] key. The monitor displays
“TRACK RDM” and random playback starts.
3. To cancel file random playback, touch the or
[TRACK RANDOM] key again.
The playback status indication “TRACK
RDM” goes off from the monitor and the file
currently being played back continues in normal playback.
TRACK ELAPSED
TRACK REMAIN
TOP function
The TOP function resets the DVD player to the
first track of the disc.
1. Press the [BND] button to playback the first
track(track No. 1).
Displaying MP3 ID3-TAG titles
ID3 information such as title, artist and album
title can be displayed for an MP3 file containing
ID3 Tag information.
∗ This function is enabled only when the panel is
open.
1. Press the [DISP] button.
Title, artist and album title are displayed.
Press the [DISP] button again to return to the
previous mode.
∗ In case of an MP3 file without ID3-TAG data,
“NO ID3 TAG DATA” appears in the display
then return to the STANDARD screen.
Listening to tracks in a random
order (Folder random playback)
This operation plays back tracks recorded on
the disc in no particular order.
1. Touch the screen and touch the [SUB
MODE] key.
2. Touch the [FOLDER RANDOM] key, then
touch the [RTN] key. The monitor displays
“FOLDER RDM” and folder random playback
starts.
3. To cancel folder random playback, touch the
or [FOLDER RANDOM] key again.
The playback status indication “FOLDER
RDM” goes off from the monitor and the track
currently being played back continues in normal playback.
VRX935VD
41
Owner’s manual
Listening to files in a folder
repeatedly (Folder repeat playback)
English
DVD Video Player Operations
English
VISUAL Operations
This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
Owner’s manual
∗ The visual 1 mode is not available when a DVD
changer is connected to the visual 1.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and operating the VTR, etc. while driving are prohibited by law in some countries.
Switching to the VISUAL mode
Notes:
• For your safety, the VRX935VD has a safety function which turns off the picture when the car is
moving, so only the audio can be heard. The picture can only be watched when the car is stopped
and the parking break is applied.
1. Press the [FUNC] buton and select the VISUAL mode.
2. Press the [BAND] button to select the VISUAL1 or VISUAL2.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
Switch to the VISUAL/VTR in TV mode you use.
1. Press the [ADJ] button to switch to the ADJUST MODE menu.
2. Touch the [NTSC/PAL] key, [NTSC] key and
[PAL] key appears in the display.
3. Touch the [NTSC] key or [PAL] key to select
“NTSC” or “PAL”.
Adjusting the brightness and tone
of color
Notes:
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [ADJ] button to switch to the ADJUST MODE menu.
2. Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch
the [BRIGHT], [HUE] and [COLOR] key to
42
VRX935VD
adjust BRIGHT, HUE and COLOR.
● “BRIGHT”:
Adjust the brightness of the display.
● “HUE”:
Adjust the tone of color (red is emphasized
or green is emphasized)
• This operation is available only when the car is
stopped and the parking brake is applied.
● “COLOR”:
Adjust the color saturation.
• This operation is available only when the car is
stopped and the parking brake is applied.
3. Operate the touch key to adjust a level.
● “BRIGHT”:
[–] key or [+] key
● “HUE”:
[R] key or [G] key
● “COLOR”:
[–] key or [+] key
4. When adjustment is made, touch the [RTN]
key to return to the ADJUST MODE menu.
Touch the [RTN] key again to return to the
STANDARD screen.
∗ To return from the adjust a level display to the
STANDARD screen, press the [ADJ] button
once again.
Changing over monitor display size
∗ This function is available only when the panel is
open.
Note
• This function is not available while you are driving.
• Switch to the VISUAL/DVD player(DVD video or
video CD)/DVD changer/TV mode you see.
1. Press the [DISP] button for 1 second or
longer to change over the monitor display
size. Each time you press the [DISP] button,
the monitor display size changes in the following order:
“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜
“CINEMA” ➜ “NORMAL”
● “NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
• The rear monitor lock displays the image of an external device (VTR, TV game console, etc.) connected to the Visual 1 terminal.
• When a DVD changer connected to the CeNET is
connected to the Visual 1 terminal, the rear monitor lock cannot be used.
• When 2-ZONE or 3-ZONE is used, the sound
from an external device (VTR, TV game console,
etc.) can only be heard from headphones connected to the external device.
• A rear monitor is a separately sold accessory.
Monitoring the CCD camera
The CCD camera can be connected to this unit.
For the power supply of the camera, mount the
power box sold separately (CAA-188).
Notes:
• This function is not available when the display is
stored.
Switching the 2-ZONE/3-ZONE
The front monitor lock and rear monitor lock allows you to enjoy 2-ZONE and 3-ZONE.
2-ZONE:
Use the front monitor lock (or rear monitor lock)
to lock the receiver screen image (or image from
a separately sold rear monitor) to switch the
speaker sound to a sound mode that differs
from the sound accompanying the image.
3-ZONE
When a separately sold rear monitor is connected, use the front or rear monitor lock to lock
the image of the receiver and that of the rear
monitor and to switch the speaker sound to a
sound mode that differs from the sound accompanying the image.
Notes:
• The front monitor lock displays the image of an
external device (VTR, TV game console, etc.)
connected to the Visual 2 terminal.
VRX935VD
43
Owner’s manual
● “WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.
● “CINEMA”: (cinema mode)
The image at both top and bottom in a display disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide
monitor display in a wide mode or a full-wide
mode, a part of the peripheral image will be lacking or deformed. In deference to the intention of
producer, an original image can be viewed in a
normal mode.
• During superimposed display, it becomes a fullwide mode.
• When the monitor display size mode is changed,
only the monitor display size indication superimposed on the screen (“NORMAL”, “WIDE”,
“F.WIDE” or “CINEMA”) will be changed, then the
corresponding display size mode will be engaged.
English
VISUAL Operations
English
VISUAL Operations
●Lock system monitor image and sound
2 ZONE
Owner’s manual
Front monitor lock
(∗1) Visual 2 connection Visual 2 connection
[OTHERS]
[NAVI]
Rear monitor
lock
3 ZONE
Image of device
connected to the
Visual 2 terminal
(∗3)
Front image
(receiver
screen)
Image of device
connected to the
Visual 2 terminal
(∗3)
Image of device
connected to the
Visual 2 terminal
Displays image of
mode selected
using the [FUNC]
button
Rear monitor
image
(separately
sold)
Image of device
connected to the
Visual 2 terminal
(∗3)
Displays image of
mode selected
using the [FUNC]
button (∗2)
Image of device connected to the
Visual 1 terminal
Vehicle speaker Plays sound of mode selected using the [FUNC] button
sound
∗1 A device connected to the Visual 2 terminal should be set up as described in the section “Switching Connect.”
∗2 No image is displayed on the rear monitor when a non-image mode such as radio, SIRIUS, CD, etc.
is engaged.
∗3 For safety reasons, this image is not displayed when the vehicle is moving. The picture can be
watched only when the vehicle is standing still and the parking brake is engaged.
2-ZONE: 1 (front monitor lock)
1. Press the [M.L] button.
2. Press the [FUNC] button to select the desired mode.
3. To cancel the monitor lock, press the [M.L]
button.
The screen shows the image of the selected
mode.
∗ When the front monitor lock is engaged,
[MENU], [LIST], [KEY PAD], [ADJ] and [A-M]
button cannot be used. Cancel the monitor
lock when you wish to use these buttons.
2-ZONE: 2 (rear monitor lock)
1. Press the [ADJ] button to display the ADJUST MODE menu.
2. Touch the [REAR MONI LOCK] key and the
[ON] key.
3. Touch the [RTN] key or press the [ADJ] button.
4. To cancel the monitor lock, press [ADJ] button, touch the [REAR MONI LOCK] key and
the [OFF] key.
44
VRX935VD
5. Touch the [RTN] key or press the [ADJ] button.
The monitor lock is now canceled.
Locking the front monitor and rear
monitor (3-ZONE)
1. Lock the rear monitor by performing the instructions in steps 1 to 3 above.
2. Press the [M.L] button to lock the front monitor.
3. Press the [FUNC] button.
The image for the selected mode is displayed for about 5 seconds after which the
front monitor lock image is displayed.
4. To cancel the monitor lock, press the [M.L]
button.
5. To cancel the rear monitor lock, press the
[ADJ] button, touch the [REAR MONI LOCK]
key and the [OFF] key.
Switching CONNECT(connect)
∗ When a navigation system is connected, use the monitor lock function.
Locking the monitor locks the screen
size in F.WIDE mode (full wide) and
the VTR system to NTSC.
OTHERS: for external devices other than a
navigation system
NONE:
when no external devices are connected
∗ The factory default setting is “NONE”.
1. When the panel is open, press the [ADJ] button to display the ADJUST MODE menu.
2. Touch the [z] key two times to select “CONNECT”.
Touch the [CONNECT] key to select “NAVI”
or “OTHERS” or “NONE”.
3. Press the [ADJ] button again or touch the
[RTN] key, the unit returns to the previous
mode.
Note:
• When an optional DVD (CD/MD) changer is connected through the CeNET cable, this unit controls all DVD (CD/MD) changer functions. This unit
can control a total of 2 changers (MD and/or CD
and/or DVD).
CD/MD changer functions
Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD (MD) changers are connected, press the [FUNC] button to
select the CD (MD) changer for play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC
CHECKING” appears in the display while the
player loads (checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
∗ If “NO DISC” appears in the display, load MDs
into the MD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
s] button to pause play.
1. Press the [s
“PAUSE” appears in the display.
s] button
2. To resume play, press the [s
again.
∗ When the panel is open, the same operation
is also available by using the [s] button in
the panel.
Switching the CD TEXT titles
This operation is only possible when this unit is
connected with a CD TEXT compatible CD
changer.
You can select the CD TEXT titles among the
disc titles, track titles and artist titles.
When the panel is closed:
1. Press the [DISP] button to show the SUB
display. The disc title, track title or artist titles,
user title is displayed.
2. Each time you press and hold the [DISP] button for 1 second or longer, the display
toggles among the disc title, the track title or
the artist titles, user title.
The selected title scrolls once.
VRX935VD
45
Owner’s manual
Make the following settings when an external
device is connected to the VISUAL 2 terminal.
NAVI:
when a navigation system is connected
CD/MD Changer
Operations
English
VISUAL Operations
English
CD/MD Changer Operations
Owner’s manual
When the panel is open:
1. Press the [DISP] button.
The disc title, track title, artist title and user
title is displayed.
2. Touch the [DISC] key, [TRACK] key, [ARTIST]
key or [USER] key to select the desired title.
The selected titles except for the user title
scroll once.
3. Press the [DISP] button again.
The STANDARD screen is returned and the
selected title is displayed.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles
already entered on MDs. Titles up to 256 characters long can be displayed by scrolling the
titles.
∗ Titles cannot be entered for MDs with this unit.
When the panel is closed:
1. Press the [DISP] button to show the SUB
display. The disc title or track title is displayed.
2. Each time you press and hold the [DISP] button for 1 second or longer, the display
toggles between the disc title and the track
title.
The selected title scrolls once.
When the panel is open:
1. Press the [DISP] button.
The disc title and track title are displayed.
2. Touch the [DISC] key or [TRACK] key to select the desired title.
The selected titles scroll once.
3. Press the [DISP] button again.
The STANDARD screen is returned and the
selected title is displayed.
Selecting an MD
When the panel is closed:
Each of the [DIRECT] button corresponds to an
MD loaded into the MD changer.
Press the [DIRECT] button (1 to 6) and select
the desired MD.
When the panel is open:
1. Touch the screen or press the [LIST] button.
46
VRX935VD
2. Each of the [DIRECT] key corresponds to an
MD loaded into the MD changer.
Touch the [DISC SELECT] key in the display,
the [DIRECT] key (1 to 6) appears in the display.
Touch the [DIRECT] key (1 to 6) and select
the desired MD.
Selecting a CD
When the panel is closed:
Each of the [DIRECT] buttons corresponds to a
disc loaded into the magazine.
●Selecting a disc from 1 to 6
Press the corresponding [DIRECT] button (1 to
6) to select the desired disc.
●Selecting a disc from 7 to 12 (only when a
12 disc CD changer is used.)
Press the corresponding [DIRECT] button (1 to 6)
for 1 second or more, then select the desired
disc.
When the panel is open:
Each of the [DIRECT] keys corresponds to a
disc loaded into the magazine.
●Selecting a disc from 1 to 6
1. Touch the screen or press the [LIST] button.
2. Touch the [DISC SELECT] key in the display,
the [DIRECT] key (1 to 6) appears in the display.
Touch the corresponding [DIRECT] key (1 to
6) to select the desired disc.
●Selecting a disc from 7 to 12 (Only when a
12 disc CD changer is used.)
Touch the [DISC SELECT] key again, the [DIRECT] key (7 to 12) appears in the display.
Touch the corresponding [DIRECT] key (7 to 12)
to select the desired disc.
Switching to a next disc. (Disc Up
function)
The disc up function plays from the first track
(track No.1) of the next disc.
Press the [BAND] button.
Each time you press the [BAND] button, the disc
changes to the next disc.
Selecting tracks with the KEY PAD
Press the [KEY PAD] button to display the KEY
PAD.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
∗ When the panel is open, the same operation is also
available by using the [a] button in the panel.
Fast-forward/Fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
∗ When the panel is open, the same operation
is also available by using the [d] button in the
panel.
●Direct track selection
1. Touch the [SRCH] key to switch the KEY PAD.
2. Touch the [0] ~ [9] key corresponding with
the track you desired. When you touch the
wrong number([0] ~ [9] key), you can cancel
that to touch the [DEL] key.
3. Touch the [ENT] key.
The specified track is selected and playback
starts.
●To repeat tracks,
touch the [T.RPT] key.
●To repeat discs,
touch the [D.RPT] key.
●To scan tracks,
touch the [T.SCN] key.
●To scan discs,
touch the [D.SCN] key.
●To play tracks at random,
touch the [T.RDM] key.
●To play discs at random,
touch the [D.RDM] key.
Selecting a track
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
∗ When the panel is open, the same operation
is also available by using the [a] button in the
panel.
Top function (CD)
The top function plays from the first track (track
No. 1) of the disc.
●When playing a disc 1 to 6
Press the [DIRECT] button (1 to 6) with the
same number as the CD playing.
●When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
Press the [DIRECT] button (1 to 6) with the
same number as the CD playing for 1 second or
longer.
Top function (MD)
The top function plays from the first track (track
No. 1) of the disc.
Press the [DIRECT] button (1 to 6) with the
same number that the MD playing.
∗ If an MD is not loaded in a slot of the MD
changer, pressing the [DIRECT] button corresponding to its disc number is invalid.
∗ When the panel is open, the same operation is also
available by using the [d] button in the panel.
VRX935VD
47
Owner’s manual
∗ This function displays the KEY PAD on the screen
and allows you to select and repeat tracks you
wish to listen to.
English
CD/MD Changer Operations
English
CD/MD Changer Operations
Owner’s manual
Scan play
Disc repeat play
The scan play locates and plays the first 10 seconds of each track on a disc automatically. This
function continues on the disc until it is cancelled or the mode is changed.
After all tracks in the current disc have been
played, the disc repeat play automatically replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
Touch the [DISC REPEAT] key, disc repeat
play starts, “DISC REPEAT” light in the display.
3. To cancel disc repeat play, touch the [DISC
REPEAT] key again. “DISC REPEAT” goes
off from the display and the unit returns to
normal play from the track being played.
∗ The scan play is useful when you want to select a
desired track.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the STANDARD screen to show SUB MODE.
Touch the [TRACK SCAN] key to start scan
play. “TRACK SCN” lights in the display.
3. Touch the [TRACK SCAN] key again to cancel the scan play. Current track continues to
play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the currently selected CD (MD) changer. This function
continues automatically until it is cancelled or
the mode is changed.
Random play
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
Touch the [DISC SCAN] key to start disc
scan play. “DISC SCN” lights in the display.
3. Touch the [DISC SCAN] key again to cancel
disc scan play. Normal disc play continues on
the current track.
The random play selects and plays individual
tracks on the disc in no particular order. This
function continues automatically until it is cancelled.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
When you touch the [TRACK RANDOM] key,
random play starts. “TRACK RANDOM”
lights in the display.
3. To cancel random play, touch the [TRACK
RANDOM] key again. “TRACK RANDOM”
goes off from the display and the unit returns
to normal play.
Repeat play
Disc random play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
Touch the [TRACK REPEAT] key, to make
repeat play starts. “TRACK REPEAT” lights
in the display.
3. To cancel repeat play, touch the [TRACK REPEAT] key. “TRACK REPEAT” goes off from
the display and the unit returns to normal play.
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled.
1. Touch the screen or press the [LIST] button,
the MENU screen appears.
2. Touch the [SUB MODE] key in the MENU
screen to show SUB MODE.
When you touch the [DISC RANDOM] key,
disc random play starts. “DISC RANDOM”
lights in the display.
3. To cancel disc random play, touch the [DISC
RANDOM] key again. “DISC RANDOM” goes
off from the display and the unit returns to
normal play from the track being played.
∗ The disc scan play is useful when you want to select a desired CD (MD).
48
VRX935VD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising