HDBaseT HDMI 1X4 CAT5/6/7 Splitter with Bi

HDBaseT HDMI 1X4 CAT5/6/7 Splitter with Bi
AV Connectivity, Distribution And Beyond...
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
HDBaseT HDMI
1X4 CAT5/6/7 Splitter
with Bi-Directional IR/POE/Ethernet & Local Out
Model #: HBT-C6POE-SP4
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Product Application & Market Sectors
Corporate
House Of Worship
Military
Residential
Education
Industrial
Medical
Aviation
www.avenview.com
TABLE OF CONTENTS
1.
GETTING STARTED...........................................................................................................................1
1.1 Important Safeguards...............................................................................................................1
1.2 Safety Instructions...................................................................................................................1
1.3 Regulatory Notices Federal Communications Commission (FCC)............................ 2
2.Introduction...............................................................................................................................3
2.1PACKAGE CONTENTS......................................................................................................................5
2.2 BEFORE INSTALLATION....................................................................................................................6
2.3 CABLE SPECIFICATIONS...................................................................................................................6
3.
APPLICATION DIAGRAM...................................................................................................................7
4.Panel Description........................................................................................................................8
INPUT PANEL (TRANSMITTER, HBT-C6POE-SP4) Front................................................................8
INPUT PANEL (TRANSMITTER, HBT-C6POE-SP4) Rear.................................................................9
5.
IR CABLE DEFINITIO.......................................................................................................................10
6.
INSTALLATION (HBT-C6POE-SP4).................................................................................................11
7.
GENERAL TROUBLESHOOTING....................................................................................................12
8.SPECIFICATIONS..............................................................................................................................14
www.avenview.com
Page
3
1.GETTING STARTED
SECTION 1: GETTING STARTED
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•• Any product, on which the serial number has been defaced, modified or removed.
•• Damage, deterioration or malfunction resulting from:
•• Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•• Repair or attempted repair by anyone not authorized by us.
•• Any damage of the product due to shipment.
•• Removal or installation of the product.
•• Causes external to the product, such as electric power fluctuation or failure.
•• Use of supplies or parts not meeting our specifications.
•• Normal wear and tear.
•• Any other causes which does not relate to a product defect.
•• Removal, installation, and set-up service charges.
1.2 Safety Instructions
The HBT-C6POE-SP4, HDBaseT HDMI 1x4 CAT5/6/7 Splitter has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments, the HBT-C6POE-SP4 should
be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! Keep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
www.avenview.com
Page
1
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols
Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com
Page
2
2.Introduction
The Avenview HBT-C6POE-SP4 HDBaseT 1x4 HDMI CAT5/6/7 Splitter with POE, Bi-Directional IR and Ethernet has been
designed to extend High Definition video and multi-channel digital audio formats to (4) four Monitors.
Video Signals: [email protected] (Ultra HD), 3D, Deep Color, and Full HD 1080p 48-bit color depth.
Audio signals: Lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD.
Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.
The HBT-C6POE-SP4 includes (1) one unit: Transmitting unit (Tx) HBT-C6POE-SP4 with (3) Three UTP output ports and (1)
HDMI output port which allows the user to extend video and audio via HDMI cable 35ft.
The bonus features with this device it can support PoE (Power over the CATx cable to the RX) also Internet (100Mbps Ethernet
service when connected to a Router). These features has been added to this unit to give the installer and user a complete
solution with the new trends in online streaming, network connected devices and new demand in Smart TV, Ultra HD monitors
and content. The HBT-C6POE-SP4 allows bi- directional IR control of the source connected to the unit from the users IR
remote control at the monitor side.
-- INPUT: HDMI with 3D & 4Kx2K, 1080p, HDCP and DVI compliant source devices
-- DATA RATE: From 250Mbps up to 3Gbps
-- PC RESOLUTIONS: Up to VGA to WUXGA
-- HD RESOLUTIONS: Up to 4Kx2K ([email protected] and [email protected])1080p ([email protected])
-- AUDIO SUPPORTED: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
-- AUDIO TRANSMISSION: (32-192kHz sample rate)
-- DISTANCE: Up to 100 meters through CAT6e/6a/7 cables
-- ETHERNET TRANSMISSION: Rate up to 100Mbps
-- MODE: Standard [email protected] or TV EDID timing
-- SERVICE: USB for Manufacturer USE ONLY
-- 3D SUPPORT: Follow by Display / TV’s EDID
-- POE SUPPORT: ONLY with capable Receiver (Rx units)
-- IR CONTROL: Bi-directional IR Control
-- NOTE:
-- The PoE function is designed for powering compatible Receiver units only.
-- The non-PoE Receivers has to be powered with a power supply.
-- Receivers (Rx) from different manufactures would not be compatible.
--
Displaying HDMI 4Kx2K resolution would require the standard 4Kx2K HDMI cable and display for accurate results.
www.avenview.com
Page
3
The User has the ability to choose
HBT-C6POE-R -Full 5 play HDBaseT Receiver - Video/Audio/IR/RS232/Ethernet/POE over a single CAT5/6/7 up to
100m (330ft).
HBT-C6POE-RL - HDBaseT Lite Receiver - Video/Audio/IR/RS-232/POE over a single CAT5/6/7 up to 60m (200ft).
NOTE:The QUALITY and TRANSMISSION of the video signals depends on the characteristics
and quality of the UTP cables. Higher resolutions and longer transmission distances require low
skew cables (<25ns/100m) for best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended.
www.avenview.com
Page
4
2.1PACKAGE CONTENTS
1
HBT-C6POE-SP4
X1
Locking Power Adapter/Brick
(+24V 2.7A DC) & Power cord for the Brick
X1
IR Receiver
X1
IR Blaster
X1
User’s Manual
X1
2
www.avenview.com
Page
5
2.2 BEFORE INSTALLATION
•• Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•• Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•• Use the DC power adapter with correct specifications and supplied with the unit. If improper power supply is used the
unit may malfunction and cause a fire.
•• Do not twist or pull by force ends of the UTP cable. It can cause malfunction.
2.3 CABLE SPECIFICATIONS
Cable Type
Range
CAT5e/6/7
100m
Pixel clock rate Video Data Rate
<=225MHz
70m
>225MHz
100m
>225MHz
<=5.3Gbps
Supported Video
(HD Video)
Up to 1080p, 60Hz, 36 bits,
3D (Data rates lower than
5.3 Gbps or below 225 Mhz
TMDS clock).
>5.3Gbps
4K2K, 30Hz video formats
(Ultra HD Video)
CAT6A/7
>5.3Gbps
4K2K, 30Hz video formats
(Ultra HD Video)
www.avenview.com
Page
6
3.
APPLICATION DIAGRAM
www.avenview.com
Page
7
4.Panel Description
INPUT PANEL (TRANSMITTER, HBT-C6POE-SP4) Front
7
1
2
3
4
5
6
8
1. HDMI IN: To receive the source INPUT
2. SYNC LED: Illuminates when HDMI Input port is connected to an active source.
3. HDMI OUT: Connect to HDMI display Max 35ft via
HDMI Cable or cascade with another Avenview type
Transmitter.
4. LINK LED: illuminates when HDMI output is connected
to TV or display monitor
5. EDID: Configure Mode (see Details below *)
6. SERVICE: This connector is reserved for factory service
only.
7. POWER LED: Illuminates when power is connected.
8. DC 24V: To power the unit via the 24V DC power supply (supplied)
EDID TV: The default factory setting is TV; don’t adjust if the image is displayed properly.
EDID STD: Switch to STD to use built-in EDID if the image is not displayed properly.
STD EDID’s video at [email protected] and audio at LPCM 2CH.
Notice
The unit will detect the PORT (1) one CAT5e/6/7 output’s EDID. When it obtains a
(4Kx2K) Ultra HD EDID the unit sends the signal accordingly to other (2) two output
ports. If PORT (1) one CAT5e/6/7 output is without a (4Kx2K) Ultra HD EDID the unit
will detect all (3) output’s EDID and send the signal that all (3) outputs ports can accept.
This device obtains the last memory function. It will default use the last output PORT (1)
one EDID when output PORT (1) one is not connected to a display after power cycling
or switch in between the EDID setting.
www.avenview.com
Page
8
INPUT PANEL (TRANSMITTER, HBT-C6POE-SP4) Rear
9
10
11
9. IR IN: use IR Extender in this port.
12
10. IR OUT: Use IR Blaster in this port
11. LAN: Connect to Internet service sharing rate of
100Mbps within the link of Transmitter.
12. CAT5e/6/7 OUT 1~3: Connect these ports to
CAT5e/6/7 HDMI Receivers (with or without PoE
function) with CAT5e/6/7 cable to extend the signal
Warning: DO NOT connect this Port with any of the HDBaseT
up to 60m/100m
Receivers, this may trigger a power shot down and damage
device.
www.avenview.com
Page
9
5.
IR CABLE DEFINITIO
IR Sockets
-- IR BLASTER: plug in the IR blaster to the HBT-C6POE-SP4 to emit all IR command signals received from the IR Extender
plugged into the Rx (Monitor Side) to control the devices corresponding to the IR signals. Example: Set Top Box or DVD
player (The Source).
-- IR EXTENDER: plug in the IR Extender into the (RX) Receiver (Monitor Side) to receive all IR command signals from the
IR remote controls of the corresponding source. Example: Set Top Box or DVD player (IR Remote Control).
-- NOTE: Incorrect placement of IR Blaster and IR Extender into the extender may result in the
failure of the IR extenders.
-- Please check carefully before plugging in the IR extender to the respective IR sockets.
-- It is clearly marked and IR IN: IR EXTENDER /IR OUT: IR BLASTER
-- WARRANTY WILL NOT COVER THE DAMAGE.
www.avenview.com
Page
10
6.
INSTALLATION (HBT-C6POE-SP4)
To setup Avenview HBT-C6POE-SP4 please follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to the Transmitter HBT-C6POE-SP4
3. Connect HBT-C6POE-R 100m or HBT-C6POE-RL 60m with a CAT5/6/7 cable with shielded ends, then connect to
display with HDMI cable.
4. Plug in 24V 2.7A DC Power (supplied).
5. Plug in the IR BLASTER: into IR out and the blinker on the IR eye (Source)
6. Plug in the IR Extender to IR IN to receive IR Signals from Remote
7. Power on the HDMI display
8. Power on HDMI Sources.
Notice
-- Addional info on Guidelines to Test & Troubleshoot HDBaseT Systems
-- Can be retreived from our website under the category Downloads for this product HBT-C6POE-SP4
www.avenview.com
Page
11
7.
GENERAL TROUBLESHOOTING
PROBLEM
POSSIBLE SOLUTION
•• Check if connection to the source and the display are correct.
•• Ensure that display device supports 480p, 720p and 1080p [email protected] resolution
•• Terminated to 568B standard with Shielded Ends Recommended
•• High Quality CAT5/6/7 Cable helps signal transmission
NO IMAGE
•• Please use the supplied power supply-DC 24V 2.7A
•• Check LED Link light see (Section 3 Panel Description)
•• Check LED Sync light see (Section 3 Panel Description
•• EDID MODE-TV: The default factory setting is on TV. The unit will detect the
1st CAT5e/6/7 output’s EDID. When obtained a (4K2K) Ultra HD 3840x2160
EDID the signal is transmitted.
EDID ISSUE
•• If the 1st CAT5e/6/7 output is without a Ultra HD 3840x2160 EDID the unit
will detect all output’s EDID and Transmit the signal that all outputs can accept.
•• EDID MODE-STD: Switch to STD to use built-in EDID if the display has No
Image. STD EDID’s video at [email protected] and audio at LPCM 2CH.
Set-Top Box
No Picture
•• HDBaseT and HDMI 1.3 standards support CLOCK STRETCHING for i2c
buss protocol
•• Example set top boxes like Scientific Atlantic results no picture. This can be
resolved by swapping out the box for a newer version that supports HDMI 1.3
not HDMI 1.2
•• Ensure the UTP cable is run within the wall away from EMI and High Voltage
power Lines.
NO Infrared
Communication
•• Please check manual of device to ensure proper placement of IR Blaster on IR
EYE.
•• Some LED /Plasma TV have EMI interference with the IR Extender, please
place the IR Rx 3-6” away from Screen
Recommended TEST
End-to-End Testing
HDBaseT system, a final end-to-end test of all the A/V components should take place.
These tests include checking the HDMI stream at the far end (sink end), the clock
rate, frame compare, video pattern, audio, EDID and HDCP with Quantum 780
(recommended)
Passive Monitoring
Passive monitoring enables an integrator to view the HDCP transactions, EDID
exchange, as well as the connection events between the actual devices in the network.
www.avenview.com
Page
12
8.
SPECIFICATIONS
Item
UNITS
Description
HBT-C6POE-SP4
UNIT DESCRIPTION
HDBaseT HDMI Transmitter
HDMI COMPLIANCE
YES HDBaseT
HDCP
VIDEO BANDWIDTH
yes 1.4
Single-link 340MHz [10.2Gbps]
480i / 480p / 720p / 1080i / 1080p60 /
SUPPORTED RESOLUTIONS
[email protected] Up to Ultra HD ([email protected]/25/30Hz)
4K2K-([email protected])
HDMI INPUT/OUTPUT
DISTANCE: Up to [email protected] 8/12-bit
4K2K: ([email protected]) ~ 75meter (250feet) (CAT6e) /
CAT5/6/7 CABLE
100meter (330feet) (CAT6a)
FULL HD: (1080p) ~ 100meter (330feet) (CAT6e) /110meter (360feet) (CAT6a)
AUDIO SUPPORT
INPUT TMDS SIGNAL
INPUT DDC SIGNAL
ESD PROTECTION
LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
1.2 Volts (peak-to-peak)
5 Volts (peak-to-peak, TTL)
Human body model — ±8kV (air-gap discharge)
& ±4kV (contact discharge)
1x HDMI
INPUT
1x 3.5mm IR IN
1x mini-USB Service only
1x LAN port
1x HDMI Local OUT
OUTPUT
1x 3.5mm IR OUT
3x CAT5e/6/7
HDMI CONNECTOR
Type A (19 pin female)
RJ45 CONNECTOR
WE/SS 8P8C with 2 LED indicators
USB CONNECTOR
Mini B
IR FREQUENCY
DIMENSIONS (L X W X H)
WEIGHT
POWER SUPPLY
POWER CONSUMPTION
30~50kHz
3” x 3.5” x 1” 145 mm(W) x 190 mm(D) x 30 mm(H)
0.5lbs 590g
24V / 2.7A DC
(US/EU standards, CE/FCC/UL certified)
36 Watt (max)
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
32˚ ~ 104˚F (0˚ to 40˚C)
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
20~90% RH (non-condensing)
www.avenview.com
Page
13
Notice
-- All HDMI over CAT5 transmission distances are measured using Belden CAT6A (625MHz), 4-Pair, U/UTPUnshielded, Riser-CMR, Premise Horizontal Cable, 23 AWG Solid Bare Copper Conductors, Polyolefin Insulation,
Patented Double-H spline, Ripcord, PVC Jacket using Quantum 980 signal HDMI Video Generator Module Video
Pattern Testing.
-- 2. The transmission length is largely affected by the type of category cables, also the type of HDMI sources, and
the type of HDMI display. The testing result shows solid UTP cables (usually in the form of 300m or 1000ft bulk
cable) can transmit a lot longer signals than stranded UTP cables (usually in the form of patch cords). Shielded STP
connectors are better suit than unshielded UTP connectors. A solid UTP CAT5e cable shows longer transmission
length than stranded STP CAT6 cable. For long extension users, solid cables are your only choice.
-- 3. EIA/TIA-568-B termination (T568B) for category cables is recommended for better performance.
-- 4. To reduce the interference among the unshielded twisted pairs of wires in category cable, you can use shielded
STP cables with shielded connector to improve EMI problems, which occurs in long transmission.
-- 5. Because the quality of the category cables has the major effects in how long transmission distance will be made
and how good is the received display, the actual transmission length is subject to your category cables. For resolution
greater than 1080i or 1280x1024, a solid CAT6 cable is the only viable choice.
www.avenview.com
Page
14
Notes
www.avenview.com
Avenview Warranty Certificate
AVENVIEW CORP. (“Avenview”) warrants Avenview-branded product(s) contained in the original packaging against defects in materials and workmanship when used
normally in accordance with Avenview's enclosed manual guidelines for a period of THREE (3) YEARS from the date of original retail purchase - Warranty Period. Avenview’s
published guidelines include but are not limited to information contained in technical specifications, user manuals and service communications.
LABOR: During the Warranty Period of THREE (3) YEARS, Avenview will repair or replace the product(s) at no cost using new or used parts equivalent to novel performance
and reliability if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Labor applicable to product(s) after Warranty Period. For labor costs,
please contact [email protected]
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if
the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact
[email protected]
To obtain Warranty: (a) proof of purchase in the form of a bill of sale or receipted invoice reflecting that the registered product(s) is within warranty period must be presented
to obtain warranty service; (b) product(s) must be registered at time of purchase. Failure to do so will result in applicable parts and labor charges. Returning product(s) must
be shipped in Avenview’s original packaging or in packaging pertaining equal degree of protection to Avenview’s. Both Avenview and purchaser are responsible for freight
charges and brokerages when shipping the product(s) to the receiver.
NOT COVERED BY THIS WARRANTY
This warranty does not apply to any non-Avenview branded product(s); non-registered Avenview product(s). This warranty does not apply: (a) to cosmetic damage, including
but not limited to scratches, dents and broken cords; (b) to damage caused by use with another product; (c) to damage caused by accident, abuse, misuse, liquid contact, fire,
earthquake or other external cause; (d) to damage caused by operating the Avenview product(s) outside Avenview’s manuals or guidelines; (e) to damage caused by service
performed by anyone who is not a representative of Avenview or an Avenview authorized personnel; (f) to defects caused by normal wear and tear or otherwise due to the
normal aging of the Avenview product(s), or (g) if any serial number has been removed or defaced from the Avenview product(s).
AVENVIEW IS NOT LIABLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR
CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR
ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT
OR CONSEQUENTIAL LOSS OR DAMAGE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
Some states do not allow the inclusion or limitation of incidental or consequential damages, or allow limitations on duration implements of the Warranty Period; therefore the above limitations or
exclusions may not be applicable to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
1100 Military Rd., Kenmore, NY 14217
1.866.508.0269
www.avenview.com
AV Connectivity, Distribution And Beyond...
TECHNICAL SUPPORT
Avenview Canada
151 Esna Park Drive, Unit 11-12
Markham, ON L3R 3B1
Phone: +1 905 907 0525
Email: [email protected]
Sales: [email protected]
Avenview USA
1100 Military Road
Kenmore, NY 14217
Phone: +1 716 218 4100 x223
Fax: +1 866 387 8764 Email:
[email protected]
Avenview Europe
Phone: +31 085 2100 613
Email: [email protected]
Avenview Asia
Email: [email protected]
Sales: [email protected]
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of
Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages
in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design.
With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but
not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement