Electronic Access Control

Electronic Access Control
Electronic Access
Control
Gebouwautomatiseringsoplossingen
Gebouwen
Vliegvelden
Ziekenhuizen
Hotels
Industrie
Make the most
of your energy
Schneider Electric
Schneider Electric, wereldwijde specialist in energiemanagement, biedt geïntegreerde oplossingen om
energie veiliger, betrouwbaarder, efficiënter en productiever te maken voor de segmenten gebouwen, dataen netwerkcentra, industrie, energie, infrastructuur en woningen. Met een omzet van e 17,3 miljard in 2007
en 120.000 medewerkers in 102 landen, helpt Schneider Electric mensen en bedrijven ‘Make the most of
their energy’.
TAC
In 2003 heeft Schneider Electric de Zweedse gebouwautomatiseerder TAC overgenomen. TAC heeft meer
dan 80 jaar ervaring in automatiseringsoplossingen voor gebouwen gebaseerd op een open geïntegreerde
IT-structuur. Het portfolio van TAC bevat producten van TAC Vista, TAC I/NET, TAC Vista Security, TAC I/A
series, Andover Continuum, en Pelco. Een aanbod dat samen met het bestaande portfolio van Schneider
Electric de tools biedt gebouwen comfortabeler, economischer en veiliger te maken. TAC is leverancier van
Open Systems for Building IT en ondersteunt LonMark®, LonWorks® en BACnet® wereldwijd.
De gebouwautomatiseringsoplossingen worden op de markt gebracht in samenwerking met geselecteerde
partners.
Om de Nederlandstalige markt zo goed mogelijk te bedienen is er een nauwe samenwerking tussen
Schneider Electric België en Schneider Electric Nederland. Het doel van Schneider Electric is om een
totaal geïntegreerde oplossingen te leveren en hierbij gebruik te maken van de synergie van het uitgebreide
portfolio van Schneider Electric.
4
Electronic Access Control
Technology overview
7
13.56mhz Mifare® smart card technology
8
Indala Readers
MX Series Slim MIFARE® Reader
MX Series Square MIFARE® Reader
Indala Cards
Mifare® 1K Adhesive Tag
Mifare® 4K Adhesive Tag
Mifare® 1K ISO Card
Mifare® 4K ISO Card
Mifare® 1K ISO Card with Magnetic stripe
Mifare® 4K ISO Card with Magnetic stripe
Mifare® 1K Key Tag
Mifare® 4K Key Tag
Idesco Readers
Access 7C Reader
Access 7C Quattro Reader
Access 7C PIN
Access 8CMt
Access 8CMt PIN Reader
Access Mfinger Biometric Reader
Access Mfinger Biometric Smart Coder
Idesco Cards
Mifare® 1K Card CM
Mifare® 1K 2402 Coin Tag
Leather Coin Tag Key ring
Mifare® 1K Sail Tag
Mifare® 1K MFinger Card
8
8
9
9
9
10
11
11
11
11
11
12
12
12
12
13
13
14
14
14
15
15
15
15
16
16
13.56mhz iClass® technology
17
HID Readers
R10 read only Reader
R30 EU sized read only Reader
R40 US sized read only Reader
RK40 read only keypad Reader
RWKL550 read/write LCD keypad Reader
RWKLB575 Bioclass Fingerprint Reader
CP575 Bioclass Enrollment Kit
HID Cards
2k/2 Tag
16k/16 Tag
2k/2 Card
16k/16 Card
16k/16 iClass®/Prox Card
2k/2 Key Fob
16k/16 Key Fob
17
17
17
18
18
18
18
19
19
19
19
20
20
21
21
21
Proximity technology
HID Readers
ProxPoint Plus Reader
MiniProx Reader
Prox80 Reader
Thinline II Reader
ProxPro Reader Without Keypad
ProxPro Reader With Keypad
MaxiProx Reader
HID Cards
MicroProx Sticky Tag
ProxCard II
IsoProx II
Smart IsoProx II
DuoProx II
22
22
22
22
23
23
23
24
24
25
25
25
26
26
26
5
Electronic Access Control
ProxKey II Fob
ProxPass Active Vehicle Tag
Indala Readers
FlexPass Arch Slim Reader
Flexpass Wave Slim Reader
Flexpass Arch WallSwitch Reader
Flexpass Wave WallSwitch Reader
Flexpass Arch Mid-Range Reader
Flexpass Wave Mid-Range Reader
FlexPass KeyPad Reader
FlexPass Arch Long-Range Reader
Indala Cards
FlexPass Adhesive Tag
FlexCard Standard Card
FlexISO Imagable Prox Card
FlexKey® Fob
Idesco Readers
Access 7A Reader
Access 7A Quattro Reader
Access 7A PIN Reader
Access 8AH Reader
Access 8AH Quattro Reader
Access 8AH PIN Reader
Idesco Cards
EM 4102 Card
Coin Tag
Leather Coin Tag Key ring
Sail Tag
Wiegand Swipe Technology
HID Readers
Classic Swipe Reader
Turnstile Reader
HID Cards
SensorCard
SensorCard II
ProxCard Plus
Magnetic Swipe Technology
6
27
27
28
28
28
29
30
30
31
32
33
34
34
34
35
35
36
36
36
36
37
37
37
38
38
38
38
38
39
39
39
39
40
40
41
41
42
Indala Readers
5000 Series 5 Volt, Mag Stripe Dorado Reader
ABA Swipe Reader with Keypad
Inadala Cards
Pre-programmed Magnetic Stripe
42
42
42
42
42
Appendices
43
Obsolete product table
43
Part number description
46
Electronic Access Control
Technology Overview
TAC sources access cards and reader products from HID, Indala, and Idesco as
proven components within our control systems. A range of formats is available for
each brand to ensure full compatibility with our Continuum and I/NET systems. Several
technologies can be employed depending on user requirements. These include the
latest Smart Card and Biometric devices as well as the more traditional Wiegand,
Proximity and Magnetic Stripe.
System compatibility
It is important to ensure that readers and cards are selected from the same
manufacturer for use on individual systems.
Smartcard technology
A smart card is the size of a conventional credit card. It has an electronic microchip
embedded in it, which stores data and programs offering advanced security
features. There are 3 types of smart card: contact, contact-less and hybrid, the
latter being a combination of any reading technology. TAC offers a contact-less card
reader system based on HID’s iCLASS® or the Phillips’ MIFARE® industry standard.
Biometrics systems
Biometrics Systems are being actively developed and will become more of an
everyday item. These systems are superior due to the fact that they identify non
transferable means of identifying people. This could be in the form of fingerprint or
eye retina recognition.
Proximity technology
Proximity Technology is a contactless system that uses radio frequency to
communicate between the card/key fobs and the reader. The reader emits an
r.f. magnetic field, that supplies energy to the card for the power required for the
devices to transfer data. Reading distances between 20 mm and 1 metre can be
achieved by use of different readers.
Wiegand technology
Wiegand Technology is a mature standard and works by embedding small lengths
of special wire into a card. This process offers a medium to high level of security.
Wiegand cards take longer than most to produce, so consideration should be given
to lead times when ordering.
Magnetic stripe technology
Magnetic Stripe Technology is the most basic and most traditional form of access
control. Due to higher security needs, this technology is becoming less favoured.
The basic operation relies on a magnetic stripe on the back of the card that gets
swiped into a reader.
Bit format
TAC offers four bit format options, and careful selection is required to ensure proper
system compatibility. The industry standard format for proximity and Wiegand
is 26 bit. The transmission of the information from the card reader to the TAC
controller is referred to as a Wiegand output, so normally you might hear a card
format described as 26 bit Wiegand. TAC offers a 37 bit format that offers a more
secure access system. This format can only be obtained through TAC for use with
Continuum. There is also an intermediate, 32 bit option that can be used with all
TAC systems. TAC assigns a site code to each customer, so that the card access
system is secure from unauthorized cards being used from any other system.
Bit Format
Continuum I/NET
Comments
26 bit
n
Generic format for all systems
32 bit AC4+4ACC
n
32 bit I/NET
37 bit ACC
n
For Continuum legacy systems only
n
n
Standard I/NET Format
Standard Continuum Format
7
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Indala Readers
A smart card is the size of a conventional credit card. It has an electronic microchip
embedded in it which stores data and programmes offering advanced security
features.
There are 3 types of smart card: contact, contact-less and hybrid. Hybrid Cards
are a combination of any reading technology. TAC offers a contact-less card reader
system based on HID’s iCLASS® or the Phillips MIFARE® industry standard.
The new Indala 13.56 MHz FlexSmart® reader family is compatible with INTRO
(ISO 15693), MIFARE®, and DESFire™ technologies. Customers simply choose the
Indala reader series with standard programming, or specify the data format and
security level that meets their configuration requirements. Indala does the rest.
Available in many standard or custom Wiegand formats, FlexSmart® readers provide
a technically superior solution.
MX 200 Series Slim MIFARE® Reader
MX 200 Slim MIFARE® Readers can be configured to read any MIFARE® or
ISO15693 card serial number (CSN), or data within a secured MIFARE® card sector
when programmed with a matching key. The MX 200 series of readers comply with
the requirements of ISO14443A. It’s the perfect choice for standard encrypted ID,
data storage solutions and multiple applications. The default MIFARE® sector used
for TAC cards and readers is sector 15, unless otherwise requested.
Image
8
Part number
Description
Colour
Termination Physical
Power
Dimensions Supply
Current
requirements
Weight
BA6542404100
MX Series Slim MIFARE®
Reader (Arch), 26 bit
Black
0.5m
Fly Lead
15 mA Typical
(75 mA Peak)
113 g
BA6542404300
MX Series Slim MIFARE®
Reader (Arch), 32 bit I/NET
BA6542404400
MX Series Slim MIFARE®
Reader (Arch,), 37 bit
Continuum
BA6542408100
MX Series Slim MIFARE®
Reader (Wave), 26 bit
BA6542408300
MX Series Slim MIFARE®
Reader (Wave), 32 bit I/NET
BA6542408400
MX Series Slim MIFARE®
Reader (Wave), 37 bit
Continuum
109 mm x 38
mm x
18 mm
9-16 VDC
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Indala Readers and Cards
MX 200 Series Square MIFARE® Readers
MX 200 Series Square MIFARE® Readers can be configured to read any MIFARE® or
ISO15693 card serial number (CSN), or data within a secured MIFARE® card sector
when programmed with a matching key. The MX 200 series of readers comply with
the requirements of ISO14443A. The reader is ideal for installation onto a standard
European back box. It’s the perfect choice for standard encrypted ID, data storage
solutions and multiple applications. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part number
Description
Colour
Termination Physical
Power
Dimensions Supply
Current
Weight
requirements
BA6542405100
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 std), 26 bit
Black
Connector
Block
20 mA Typical
(75 mA Peak)
BA6542405300
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 std), 32 bit I/NET
BA6542405400
MX Series Square MIFARE®
Reader (wallswitch EU 80*80 std),
37 bit Continuum
BA6542406100
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 pin), 26 bit
BA6542406300
MX Series Square MIFARE®
Reader (wallswitch EU
80*80 pin), 32 bit I/NET
BA6542406400
MX Series Square MIFARE®
Reader (wallswitch EU 80*80 pin),
37 bit Continuum
86 mm x
86 mm x
30 mm
9–16
VDC
160 g
The contactless MIFARE® card can be used for diverse applications, such as access
control, cashless vending, public transportation, airline ticketing, customer loyalty
and photo ID cards. Sixteen securely separated files enable multiple applications
and support future growth.
MIFARE® 1K Adhesive Tag
The MIFARE® 1K Adhesive Tag can turn your plastic ID badge into a proximity
credential. Effortlessly upgrade from magnetic stripe or barium ferrite proximity
technology by attaching the tag to your existing card. The MIFARE® 1K Adhesive
tag will also adhere to any non-metallic device, such as a mobile phone or PDA, to
create an instant proximity badge. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part number
Description
Coding
Dimensions
BA6542451000
MIFARE® 1K Adhesive Tag
Unprogrammed
BA6542451100
MIFARE® 1K Adhesive Tag, Sector 15
26 bit
Diameter 33 mm,
Thickness 1.8 mm
BA6542451300
MIFARE® 1K Adhesive Tag, Sector 15, I/
NET
32 bit
BA6542451400
MIFARE® 1K Adhesive Tag, Sector 15,
Continuum
37 bit
9
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Indala Cards
MIFARE® 4K Adhesive Tag
The MIFARE® 4K Adhesive Tag can turn your plastic ID badge into a proximity
credential. Effortlessly upgrade from magnetic stripe or barium ferrite proximity
technology by attaching the tag to your existing card. The MIFARE® 4K Adhesive
tag will also adhere to any non-metallic device, such as a cell phone or PDA, to
create an instant proximity badge. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part number
Description
Coding
Dimensions
BA6542452000
MIFARE® 4K Adhesive Tag
Unprogrammed
BA6542452100
MIFARE® 4K Adhesive Tag,
Sector 15
26 bit
Diameter 33 mm,
Thickness 1.8 mm
BA6542452300
MIFARE® 4K Adhesive Tag,
Sector 15, I/NET
32 bit
BA6542452400
MIFARE® 4K Adhesive Tag,
Sector 15, Continuum
37 bit
MIFARE® 1K ISO Card
The MIFARE® 1K ISO Card is a credit card thin access credential with nominal
thickness of 0.76mm. The credential comes with a graphics quality surface on both
sides of the card, and has the ability to contain multiple ID technologies in a single
credential. The default MIFARE® sector used for TAC cards and readers is sector 15,
unless otherwise requested.
Image
Part number
Description
Coding
Surface
Thickness
BA6542453000
MIFARE® 1K ISO Card
Unprogrammed
Graphics
0.76 mm
BA6542453100
MIFARE® 1K ISO Card, Sector
15
26 bit
BA6542453300
MIFARE® 1K ISO Card, Sector
15, I/NET
32 bit
BA6542453400
MIFARE® 1K ISO Card, Sector
15, Continuum
37 bit
MIFARE® 4K ISO Card
The MIFARE® 4K ISO Card is a credit card thin access credential with nominal
thickness of 0.76mm. The credential comes with a graphics quality surface on both
sides of the card, and has the ability to contain multiple ID technologies in a single
credential. The default MIFARE® sector used for TAC cards and readers is sector 15,
unless otherwise requested.
Image
10
Part number
Description
Coding
Surface
Thickness
BA6542454000
MIFARE® 4K ISO Card
Unprogrammed
Graphics
0.76 mm
BA6542454100
MIFARE® 4K ISO Card, Sector
15
26 bit
BA6542454300
MIFARE® 4K ISO Card, Sector
15, I/NET
32 bit
BA6542454400
MIFARE® 4K ISO Card, Sector
15, Continuum
37 bit
Indala Readers and Cards
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
MIFARE® 1K ISO Card with Magnetic Stripe
The MIFARE® 1K ISO Card with Magnetic Stripe is a credit card thin access
credential with nominal thickness of 0.76 mm. The credential comes with a graphics
quality surface on both sides of the card, and has the ability to contain multiple ID
technologies in a single credential. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part number
Description
Coding
Surface
Thickness
BA6542455000
MIFARE® 1K ISO Card c/w Magnetic
stripe
Unprogrammed
Graphics
0.76 mm
BA6542455100
MIFARE® 1K ISO Card c/w Magnetic
stripe , Sector 15
26 bit
BA6542455300
MIFARE® 1K ISO Card c/w Magnetic
stripe , Sector 15, I/NET
32 bit
BA6542455400
MIFARE® 1K ISO Card c/w Magnetic
stripe , Sector 15, Continuum
37 bit
MIFARE® 4K ISO Card with Magnetic Stripe
The MIFARE® 4K ISO Card with Magnetic Stripe is a credit card thin access
credential with nominal thickness of 0.76 mm. The credential comes with a graphics
quality surface on both sides of the card, and has the ability to contain multiple ID
technologies in a single credential. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part number
Description
Coding
Surface
Thickness
BA6542456000
MIFARE® 4K ISO Card c/w Magnetic
stripe
Unprogrammed
Graphics
0.76 mm
BA6542456100
MIFARE® 4K ISO Card c/w Magnetic
stripe , Sector 15
26 bit
BA6542456300
MIFARE® 4K ISO Card c/w Magnetic
stripe , Sector 15, I/NET
32 bit
BA6542456400
MIFARE® 4K ISO Card c/w Magnetic
stripe , Sector 15, Continuum
37 bit
MIFARE® 1K Key Tag
The MIFARE® 1K Key Tag contemporary design enables it to be easily attached
to a key ring, badge clip or badge lanyard. Built to withstand harsh operating
environments, MIFARE® 1K Key Tag’s rugged double-sealed construction also
allows for customisation. By adding a company logo, the tag is ideally suited for
vacation resorts, locker rooms, health spas, apartment buildings, club houses, as
well as commercial office spaces and industrial applications where photo ID’s are
not required.
The default MIFARE® sector used for TAC cards and readers is sector 15, unless
otherwise requested.
Image
Part number
Description
Coding
Dimensions
BA6542457000
MIFARE® 1K Key Tag
Unprogrammed
BA6542457100
MIFARE® 1K Key Tag, Sector 15
26 bit
44 mm x
30 mm x
6 mm
BA6542457300
MIFARE® 1K Key Tag, Sector 15, I/NET
32 bit
BA6542457400
MIFARE 1K Key Tag, Sector 15, Continuum
37 bit
®
11
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Indala Cards and Idesco Readers
MIFARE® 4K Key Tag
The MIFARE® 4K Key Tag’s contemporary design enables it to be easily attached
to a key ring, badge clip or badge lanyard. Built to withstand harsh operating
environments, the tag’s double-sealed construction also allows for customisation.
By adding a company logo, the tag is ideally suited for vacation resorts, locker
rooms, health spas, apartment buildings, club houses, as well as commercial office
spaces and industrial applications where photo ID’s are not required. The default
MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise
requested.
Image
Part number
Description
Coding
Dimensions
BA6542458000
MIFARE® 4K Key Tag
Unprogrammed
BA6542458100
MIFARE® 4K Key Tag, Sector 15
26 bit
44 mm x
30 mm x
6 mm
BA6542458300
MIFARE® 4K Key Tag, Sector 15, I/NET
32 bit
BA6542458400
MIFARE 4K Key Tag, Sector 15, Continuum
37 bit
®
Idesco readers are designed for reliable and secure access control, data collection
and people identification in various environments. These multi-technology readers
read the unique ID numbers of Philips MIFARE®, HID iCLASS® and most of the
existing and forthcoming ISO15693 tags.
Access 7C Reader
The Access 7C Basic Reader’s vandal-resistant design guarantees that the
reader can be used in the most demanding surroundings. The Basic housing is
internationally registered and suitable for indoor and outdoor usage, and can even
be installed directly onto metal surfaces without additional insulation. The Access
7C range of readers makes use of serial number technology (CSN) and this is
provided in a 32 bit format.
Image
Part number
Description
Colour
Physical
Dimensions
Power
Supply
Current
requirements
Termination
Weight
BA6543401000
Access 7C Reader (Black,
32 bit Serial No, 3m Cable,
White Lens)
Black
110 mm x
43 mm x
24 mm
24 VDC
(10-30 VDC)
100 mA
max.
3m Flying Lead
244 g
Access 7C Quattro Reader
The square format of the Access 7C Quattro Reader is designed for mounting
directly onto any electrical back box. The mounting unit of the reader is equipped
with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant
snap-on cover is placed on the mounting unit. The Access 7C range of readers
makes use of serial number technology (CSN) provided in a 32 bit format.
Image
12
Part number
Description
Colour
BA6543402000
Access 7C Quattro Reader Black
(Black, 32 bit Serial No, 3m
Cable)
Physical
Dimensions
Power
Supply
Current
requirements
Termination
Weight
86 mm x
86 mm x
17 mm
24 VDC
(10-30 VDC)
100 mA
max.
3m Flying Lead
244 g
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Idesco Readers
Access 7C PIN
The Access 7C PIN improves security in access control by providing PIN code identification to be used together with an identification card. The keypad of the reader
is based on EMFi foil technology. The EMFi foil senses the pressure changes on the
active key area when pressed. There are no moving parts in the PIN pad, and due
to this no maintenance is required. The Access 7C range of readers makes use of
serial number technology (CSN) provided in a 32 bit format.
Image
Part number
Description
Colour
Physical
Dimensions
Power
Supply
Current
requirements
Termination
Weight
BA6543403000
Access 7C PIN Reader
(Black, 32 bit Serial No,
3M Cable, White Lens)
Black
138 mm x
44 mm x
24 mm
24 VDC
(10-30
VDC)
100 mA
max.
3m Flying Lead
244 g
BA6543404000
Access 7C PIN Reader
(Black, 32 bit Serial No,
3M Cable, White Lens,
Backlit)
Access 8CMt
Access 8CMt readers are designed for reliable and secure access control, data
collection and people identification in various environments.
The Access 8CMt MIFARE® memory reader reads compatible application-specific
data from one selected sector of the MIFARE® standard cards, and also supports
MIFARE® multi-application cards. The default MIFARE® sector used for TAC cards
and readers is sector 15, unless otherwise requested.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6543405000
Access 8CMt Reader
(All TAC- bit Formats,
Sector 15, White Lense)
Black
3m Fly Lead
110 mm x
43 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA Max.
244 g
Access 8CMt Quattro Reader
The Access 8CMt Quattro Reader is designed for mounting directly onto any
electrical back box. The mounting unit of the reader is equipped with installation
holes; ideal for fixing to plaster walls or other surfaces. An elegant snap-on cover
is placed on the mounting unit. The Access 8CMt MIFARE® memory reader reads
compatible application-specific data from one selected sector of the MIFARE®
standard cards, and also supports MIFARE® multi-application cards. The default
MIFARE® sector used for TAC cards and readers is sector 15, unless otherwise
requested.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6543406000
Access 8CMt Quattro
Reader (All TAC- bit
Formats, Sector 15)
Black
3m Fly Lead
86 mm x
86 mm x
17 mm
24 VDC
(10-30
VDC)
130 mA
max.
315 g
13
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Idesco Readers
Access 8CMt PIN Reader
The Access 8CMt PIN Reader improves security in access control by providing PIN
code identification to be used together with an identification card. The keypad of
the reader is based on EMFi foil technology. There are no moving parts in the PIN
pad, and due to this no maintenance is required. The default MIFARE® sector used
for TAC cards and readers is sector 15 unless otherwise requested.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6543407000
Access 8CMt PIN
Reader (All TACbit
Formats, Sector
15, White Lens)
Black
3m Flying Lead
138 mm x
44 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA max.
325 g
BA6543408000
Access 8CMt PIN
Reader (All TACbit
Formats, Sector
15, White Lens,
Backlit)
Access Mfinger Biometric Reader
The Access MFinger Biometric Reader is a high security biometric reader combining
security features of the MIFARE® smart card technology and the user’s individual
and unique fingerprint. The reader compares a fingerprint stored in a MIFARE®
smart card with the scanned fingerprint before transmitting data into the system.
MIFARE® security keys protect the templates inside the card.The Mfinger reader
makes use of serial number technology provided in a 32 bit format. Please note this
Biometric reader must be used in combination with the Access 7C range of readers.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Power
consumption
Weight
BA6543901000
Access Mfinger
Biometric Reader
(Serial No, Keypad),
8 bit burst Wiegand
Black
Terminal strip
111 mm x
138 mm x
44 mm
12-24 VDC
<5W
560 g
Access Mfinger Biometric Smart Coder
With the Access MFinger Biometric Smart Coder you can easily enrol fingerprints,
configure your Access Mfinger readers and set security privileges for each user. The
Access MFinger smart coder kit includes management software, desktop reader
and a desktop scanner.
Image
14
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Power
consumption
Weight
BA6543902000
Access Mfinger
Biometric Smart Coder
(Serial No, Keypad), 8 bit
burst Wiegand
Black
Terminal strip
111 mm x
138 mm x
44 mm
12-24 VDC
<5W
500 g
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Idesco Cards
Idesco offers a wide range of 13.56Mhz tags and cards. Typical applications
for these products include access control, time and attendance and asset
marking.
MIFARE® 1K Card CM
The PVC MIFARE® 1K Card CM has good printability with thermal transfer and dyesublimation printers. The default MIFARE® sector used for TAC cards and readers is
sector 15, unless otherwise requested.
Image
Part number
Description
Coding
Surface
Thickness
BA6543450000
MIFARE® 1K Card CM, Serial
Number
Unprogrammed
Graphics
1 mm
BA6543450100
MIFARE® 1K Card CM,
Sector 15
26 bit
BA6543450300
MIFARE® 1K Card CM, Sector 32 bit
15, I/NET
BA6543450400
MIFARE® 1K Card CM, Sector 37 bit
15, Continuum
MIFARE® 1K 2402 Coin Tag
The epoxy laminated MIFARE® 1K 2402 Coin Tag is easy to fix in a convenient
leather key ring. The default MIFARE® sector used for TAC cards and readers is
sector 15, unless otherwise requested.
Image
Part number
Description
Coding
Thickness
BA6543451000
MIFARE® 1K 2402 Coin Tag,
Serial Number
Unprogrammed
Radius 12 mm
Thickness 2 mm
BA6543451100
MIFARE® 1K 2402 Coin Tag,
Sector 15
26 bit
BA6543451300
MIFARE® 1K 2402 Coin Tag,
Sector 15, I/NET
32 bit
BA6543451400
MIFARE® 1K 2402 Coin Tag,
Sector 15, Continuum
37 bit
Leather Coin Tag Key ring
To be used with the Milfare 1K 2402 Coin Tags.
Image
Part number
Description
Dimensions
BA6543352000
Leather Coin Tag Key ring,
Serial No, Format
63 mm x 35 mm
15
Electronic Access Control
13.56MHz Mifare® Smart Card Technology
Idesco Cards
MIFARE® 1K Sail Tag
The MIFARE® 1K Sail Tag key ring is very robust and beautifully designed for everyday use. The default MIFARE® sector used for TAC cards and readers is sector 15,
unless otherwise requested.
Image
Part number
Description
Coding
Dimensions
BA6543452000
MIFARE® 1K Sail Tag, Serial
Number
Unprogrammed
55 mm x 30 mm
BA6543452100
MIFARE® 1K Sail Tag, Sector
15
26 bit
BA6543452300
MIFARE® 1K Sail Tag, Sector
15, I/NET
32 bit
BA6543452400
MIFARE® 1K Sail Tag, Sector
15, Continuum
37 bit
MIFARE® 1K MFinger Card
A Fingerprint template is stored on the MIFARE® 1K Mfinger Card making it possible
to store two fingerprint templates per user on the 1K card.
Image
16
Part number
Description
Coding
Thickness
BA6543950000
MIFARE® 1K MFinger Card,
Serial Number, Finger
Template on Card
Unprogrammed
1 mm
Electronic Access Control
13.56MHz Mifare® iClass Technology
HID Readers
iCLASS® smart readers and cards make access control more powerful,
more versatile and offer enhanced security through data encryption and
mutual authentication between the reader and cards. iCLASS® readers are
user-friendly, delivering the same convenience and reliability of HID’s Prox
technology.
These readers support FIPS 201 PIV (Personal Identification Verification). Fully
compliant iCLASS® contactless smart card readers are available to output the
FASC-N (Federal Agency Smart Credential Number) in multiple configurations,
providing the versatility to support both existing and new access control systems.
Standard communication protocols make it easy to replace existing access control
card readers with HID FIPS 201 compliant card readers.
R10 Read Only Reader
The R10 Read Only Reader’s slim design is perfect for metal mullions or any other
space-limited installation, providing a standard Wiegand output, suitable for all TAC
access control systems. The R10 offers the ability to read 32 bit MIFARE® serial
numbers, and allows encrypted data transfer between the card and the reader
through the use of secure algorithms.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541501000
R10 read only
Reader
Black
0.5 m
Fly Lead
48 mm x
40 mm x
8 mm
10-16 VDC
Ave: 80 mA
Peak: 225 mA
@12V
91 g
R30 EU Sized Read Only Reader
The R30 EU Sized Read Only Reader is designed to cover 80 mm x 80 mm square
European back boxes, with slotted mounting plate, and also provides for Asian
back box spacing. The R30 provides a standard Wiegand output, suitable for all
TAC access control systems. The R30 offers the ability to read 32 bit MIFARE® serial
numbers. Allows encrypted data transfer between the card and the reader through
the use of secure algorithms.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541502000
R30 EU sized
read only
Reader
Black
0.5m
Fly Lead
84 mm x
84 mm x
19 mm
10-16 VDC
Ave: 80 mA
Peak: 225 mA
@12V
113 g
17
Electronic Access Control
13.56MHz Mifare® iClass Technology
HID Readers
R40 US Sized Read Only Reader
The R40 US Sized Read Only Reader is designed to mount and cover single gang
switch boxes, primarily used in the United States, and offers the ability to read 32 bit
MIFARE® serial numbers. Allows encrypted data transfer between the card and the
reader through the use of secure algorithms.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541502000
R30 EU sized read
only Reader
Black
0.5m
Fly Lead
84 mm x
84 mm x
19 mm
10-16 VDC
Ave: 80 mA,
225 mA
[email protected]
250 g
RK40 Read Only Keypad Reader
The RK40 Read Only Keypad Reader is designed to mount and cover single
gang switch boxes and includes a slotted mounting plate for European and Asian
back box spacing. This device also offers the ability to read 32 bit MIFARE® serial
numbers and includes a heavy duty keypad. It allows encrypted data transfer
between the card and the reader through the use of secure algorithms.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541504000
RK40 read only
keypad Reader,
8 bit burst Wiegand
Black
Terminal
Blocks
84 mm x
122 mm x
23 mm
10-16 VDC
Ave: 72 mA
Peak: 244 mA
@12V
283 g
RWKL550 Read/Write LCD Keypad Reader
The RWKL550 Read/Write LCD Keypad Reader uses 13.56 MHz contactless smart
card technology. BioCLASS products provideusers with new options for supporting
multi-authentication of identity. Uses a personal identification number (PIN) number
along with a contactless card presentation.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541505000
RWKL550 read/
write LCD keypad
Reader, 8 bit burst
Black
Terminal
Blocks
147 mm x
96 mm x
30 mm
9-12 VDC
250 mA
Standby /
450 mA peak
218 g
RWKLB575 Bioclass Fingerprint Reader
The RWKLB575 Bioclass Fingerprint Reader uses 13.56 MHz contactless smart
card technology. BioCLASS products provide users with new options for supporting
multi-authentication of identity. Combines a contactless card presentation with a
fingerprint biometric.
Image
18
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541906000
RWKLB575 Bioclass
Fingerprint Reader,
8 bit burst
Black
Terminal
Blocks
203 mm x
96 mm x
35 mm
9-12 VDC
350 mA
Standby /
520 mA peak
83 g
Electronic Access Control
13.56MHz Mifare® iClass Technology
HID Readers
CP575 Bioclass Enrollment Kit
The iCLASS® CP575A Enrollment Kit is designed for on-site programming of access
control data, Personal Identification Number (PIN) codes, and user data onto HID
iCLASS® cards. Allows HID proximity formats, keypad PIN codes and user data
fields to be programmed directly into iCLASS® contactless smart cards.
HID supports 13.56 MHz iCLASS® read/write contactless smart card
technology in various combinations with magnetic stripe and contact smart chip
module.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power Supply
Current
requirements
Weight
BA6541907000
CP575 Bioclass
Enrollment Kit
Black
Terminal Block
211 mm x
130 mm x
113 mm
12 VDC
350 mA
Standby /
520 mA peak
27 g
2k/2 Tag
The 2k/2 Tag provides the convenience of HID’s iCLASS® contactless read/write
technology in a small disk-shaped package. Allows users to easily and costeffectively turn a plastic ID badge or contact smart chip card into a contactless
smart card. This self-adhesive tag attaches easily to mobile phones, PDAs, and
other non-metallic objects. All 2K bit (256 bytes) iCLASS® credentials are available
in two application area configuration only.
Image
Part number
Description
Coding
Dimensions
BA6541551000
2k/2 Sticky Tag
Unprogrammed
BA6541551100
2k/2 Sticky Tag
26 bit
Diameter 33 mm,
Thickness 1.8 mm
BA6541551300
2k/2 Sticky Tag, I/NET
32 bit I/NET
BA6541551400
2k/2 Sticky Tag, Continuum
37 bit
16k/16 Tag
The 16k/16 Tag provides the convenience of HID’s iCLASS® contactless read/
write technology in a small disk-shaped package. Allows users to easily and costeffectively turn a plastic ID badge or contact smart chip card into a contactless
smart card. Attaches easily to mobile phones, PDAs, and other non-metallic
objects. All 16K bit (2k bytes) iCLASS® credentials are offered in sixteen application
area configuration only.
Image
Part number
Description
Coding
Dimensions
BA6541552000
16k/16 Sticky Tag
Unprogrammed
BA6541552100
16k/16 Sticky Tag
26 bit
Diameter 33 mm,
Thickness 1.8 mm
BA6541552300
16k/16 Sticky Tag, I/NET
32 bit I/NET
BA6541552400
16k/16 Sticky Tag, Continuum 37 bit
19
Electronic Access Control
13.56MHz Mifare® iClass Technology
HID Readers
2k/2 Card
The iCLASS® 2k/2 Card offers the ability to add a magnetic stripe, barcode, anticounterfeiting feature, custom artwork, or photo ID. Meets ISO standards for thickness for use with direct image and thermal transfer printers. All 2K bit (256 bytes)
iCLASS® credentials are available in two application area configuration only.
Image
Part number
Description
Coding
Surface
Thickness
BA6541553000
2k/2 Card
Unprogrammed
Graphics
0.84 mm
BA6541553100
2k/2 Card
26 bit
BA6541553300
2k/2 Card, I/NET
32 bit
BA6541553400
2k/2 Card, Continuum
37 bit
16k/16 Card
The iCLASS® 16k/16 Card offers the ability to add a magnetic stripe, barcode,
anti-counterfeiting feature, custom artwork, or photo ID. Meets ISO standards for
thickness for use with direct image and thermal transfer printers. All 16K bit (2k
bytes) iCLASS® credentials are offered in sixteen application area configuration only.
Image
Part number
Description
Coding
Surface
Thickness
BA6541554000
16k/16 Card
Unprogrammed
Graphics
0.84 mm
BA6541554100
16k/16 Card
26 bit
BA6541554300
16k/16 Card, I/NET
32 bit
BA6541554400
16k/16 Card, Continuum
37 bit
2k/2 iCLASS®/Prox Card
The 2k/2 iCLASS®/Prox Card combines iCLASS® read/write technology and HID
125 kHz proximity technology in a single ISO standard thickness card. This enables
contactless smart card applications to be added to an existing HID proximity
technology access control system. Offers the ability to add a magnetic stripe,
barcode, anti-counterfeiting feature, custom artwork, or photo ID. All 2K bit (256
bytes) iCLASS® credentials are available in two application area configuration only.
Image
20
Part number
Description
Coding
Surface
Thickness
BA6541555000
2k/2 iCLASS®/Prox Card
Unprogrammed
Graphics
0.84 mm
BA6541555100
2k/2 iCLASS®/Prox Card
26 bit
BA6541555300
2k/2 iCLASS®/Prox Card, I/NET
32 bit
BA6541555400
2k/2 iCLASS®/Prox Card, Continuum
37 bit
Electronic Access Control
13.56MHz Mifare® iClass Technology
HID Readers
16k/16 iCLASS®/Prox Card
The 16k/16 iCLASS®/Prox Card combines iCLASS® read/write technology and HID
125 kHz proximity technology in a single ISO standard thickness card. This enables
contactless smart card applications to be added to an existing HID proximity
technology access control system. Offers the ability to add a magnetic stripe,
barcode, anti-counterfeiting feature, custom artwork, or photo ID. All 16K bit (2k
bytes) iCLASS® credentials are offered in sixteen application area configuration only.
Image
Part number
Description
Coding
Surface
Thickness
BA6541556000
16k/16 iCLASS®/Prox Card
Unprogrammed
Graphics
0.84 mm
BA6541556100
16k/16 iCLASS®/Prox Card
26 bit
BA6541556300
16k/16 iCLASS®/Prox Card, I/NET
32 bit
BA6541556400
16k/16 iCLASS®/Prox Card,
Continuum
37 bit
2k/2 Key Fob
The 2k/2 Key Fob incorporates iCLASS® contactless read/write technology into
a convenient device approximately the size of an automotive key. Molded plastic
enclosure provides durability in harsh environments. Provides an external number
for easy identification and control. Can be placed on a key ring or clipped to a
lanyard for convenient entry. All 2K bit (256 bytes) iCLASS® credentials are available
in two application area configuration only.
Image
Part number
Description
Coding
Dimensions
BA6541556000
2k/2 Key Fob
Unprogrammed
3.4 mm x 32 mm x 38 mm
BA6541556100
2k/2 Key Fob
26 bit
BA6541556300
2k/2 Key Fob, I/NET
32 bit
BA6541556400
2k/2 Key Fob, Continuum
37 bit
16k/16 Key Fob
The 16k/16 Key Fob incorporates iCLASS® contactless read/write technology into
a convenient device approximately the size of an automotive key. Molded plastic
enclosure provides durability in harsh environments. Provides an external number
for easy identification and control. Can be placed on a key ring or clipped to a
lanyard for convenient entry. All 16K bit (2k bytes) iCLASS® credentials are offered in
sixteen application area configuration only.
Image
Part number
Description
Coding
Dimensions
BA6541558000
16k/16 Key Fob
Unprogrammed
3.4 mm x 32 mm x 38 mm
BA6541558100
16k/16 Key Fob
26 bit
BA6541558300
16k/16 Key Fob, I/NET
32 bit
BA6541558400
16k/16 Key Fob, Continuum
37 bit
21
HID Readers
Electronic Access Control
Proximity Technology
Proximity Technology is a contactless system that uses radio frequency to
communicate between the card/keyfobs and the reader. The reader emits an
r.f. magnetic field that supplies energy to the card for the power required for the
devices to transfer data. Reading distances between 20 mm and 1 metre can be
achieved by use of different readers.
The HID line of proximity readers offers highly reliable operation with consistent
read range and performance. The units read multiple Wiegand formats and every
model is designed for both indoor and outdoor use. All models provide a standard
multicolour LED with internal or host control and a standard audible read indicator
that is on/off selectable.
ProxPoint Plus Reader
The ProxPoint Plus Reader offers a compact and economical solution for most
standard access control requirements. Its potted electronics are ideal for both
indoor and outdoor applications. The reader is fully compatible with all TAC access
control systems and suitable for all TAC proprietary bit formats. These readers
accept a supply of 5-16 VDC and they have a read range of 25 to 75 mm.
Image
Part number
Description
BA6541301000
ProxPoint
Plus Reader
BA6541302000
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
Grey
Average 30 mA,
Peak 75 mA
75 g
Beige
BA6541303000
Black
BA6541304000
White
0.5m
Fly Lead
80 mm x
43 mm x
17 mm
5-16 VDC
MiniProx Reader
The MiniProx Reader boasts an epoxy sealed, slim design that allows the reader
to be mounted indoor or out, even directly on metal with no change in read range
performance. Accepts 5-16 volts and has a maximum read range of 100 to 140 mm.
Image
Part number
Description
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
BA6541305000
MiniProx
Reader
Grey
Average 20 mA,
Peak 110 mA
@ 12VDC
108 g
BA6541306000
22
Beige
BA6541307000
Grey
BA6541308000
Beige
0.5m
Fly Lead
Terminal Strip
152 mm x
43 mm x
19 mm
5-16 VDC
HID Readers
Electronic Access Control
Proximity Technology
Prox80 Reader
The Prox80 Reader is an 80 mm square reader designed to mount directly onto
European single-gang electrical back boxes. With a three-piece, weatherproof potted enclosure and long flying lead of 2.7m, the Prox 80 is easily installed, accepts
5-16 VDC and provides a maximum read range of 37 to 140 mm. The reader is fully
compatible with all TAC access control systems.
Image
Part number
Description
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
BA651309000
Prox80
Reader
Grey
Average 30 mA,
Peak 110mA
@ 5 VDC;
Average 20 mA,
Peak 115 mA
@ 12 VDC
75 g
BA6541310000
White
2.7m
Fly Lead
80 mm x
80 mm x
20 mm
5-16 VDC
Thinline II Reader
The ThinLine II Reader provides the same performance and reliability as the MiniProx but with a low profile appearance. This reader can be mounted directly on
metal with minimal impact on the read range performance. As with the MiniProx, the
ThinLine II accepts 5-16 volts and a maximum read range of 100 to 140 mm.
Image
Part number
Description
BA6541311000
Thinline II
Reader
BA6541312000
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
Beige
Average 20 mA,
Peak 115 mA
@ 12 VDC
94 g
Grey
BA6541313000
Black
BA6541314000
Grey
0.45m
Fly Lead
11.9 mm x
76 mm x
17 mm
5-16 VDC
ProxPro Reader Without Keypad
The ProxPro Reader Without Keypad combines all the electronics usually found in
two separate packages. Ideal for medium range applications, the ProxPro offers
high reliability, consistent read range characteristics and low power consumption. It
is available with an optional, integrated, weather resistant keypad (see next section)
offering an additional level of security by allowing the use of a personal identification
number (PIN). Maximum read range of 76 mm to 230 mm.
Image
Part number
Description
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
BA6541315000
ProxPro
Reader
without
Keypad
Grey
Average 100 mA,
Peak 120 mA
@ 24 VDC
336 g
BA6541316000
Beige
Terminals
127 mm x
127 mm x
25 mm
10-29 VDC
23
HID Readers
Electronic Access Control
Proximity Technology
ProxPro Reader With Keypad
The ProxPro Reader With Keypad combines all the electronics usually found in
two separate packages. Ideal for medium range applications, the ProxPro offers
high reliability, consistent read range characteristics and low power consumption.
It is available with an optional, integrated, weather resistant keypad offering an
additional level of security by allowing the use of a personal identification number
(PIN). The keypad interfaces with the host system either by sending the data
over the data output lines or via a direct connection to the host keypad interface.
Maximum read range: 76 mm to 230 mm.
Image
Part number
Description
BA6541317000
ProxPro
with Keypad,
8bit burst
Wiegand
BA6541318000
BA6541319000
BA6541320000
ProxPro
with Keypad,
3*4 matrix
Wiegand
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
Grey
Average 100 mA
Peak 120 mA
@ 24 VDC
336 g
Terminals
127 mm x
127 mm x
25 mm
Beige
10-28.5
VDC
Grey
Beige
MaxiProx Reader
The MaxiProx Reader is ideal for long range applications. New signal processing
techniques incorporated in this reader provide a high tolerance to burst and other
transient types of ambient RF interference. This makes the MaxiProx ideal for
installations incorporating parking control, or where special consideration is needed
to facilitate access to physically challenging environments. Power requirements are
12 or 24VDC and the unit interface with all existing Wiegand protocol access control
systems. Maximum read range: 230 mm to 760 mm.
Image
24
Part number
Description
Colour Termination Physical
Power
Dimensions Supply
Current
Requirements
Weight
BA6541321000
MaxiProx
Reader
Grey
Average 200 mA,
Peak 700 mA
@ 12VDC;
Average 260 mA,
Peak 1.2 A
@ 24 VDC.
1.4 kg
Terminals
305 mm x
305 mm x
25 mm
12 or 24
VDC
Electronic Access Control
Proximity Technology
HID Cards
The HID line of Proximity Cards are housed in a thin, durable package
approximately the size of a credit card. The cards are strong and flexible and
therefore highly resistant to cracking and breaking.
MicroProx Sticky Tag
The MicroProx Sticky Tag incorporates proximity technology into a small discshaped self-adhesive transponder. It provides a seamless upgrade from Wiegand
swipe or magnetic stripe technologies, ideal for dual systems applications and
offers great flexibility. Compatible with all HID proximity readers, and has a typical
maximum read range of 51 to 114 mm.
Image
Part number
Description
Coding
Dimensions
BA6541350000
MicroProx Sticky Tag (Grey)
Unprogrammed
BA6541350100
MicroProx Sticky Tag (Grey)
26 bit
Diameter 33 mm
Thickness 1.78 mm
BA6541350200
MicroProx Sticky Tag (Grey), AC 4+4, Continuum
32 bit
BA6541350300
MicroProx Sticky Tag (Grey), I/NET
32 bit
BA6541350400
MicroProx Sticky Tag (Grey), Continuum
37 bit
ProxCard II
The Prox Card II incorporates radio frequency identification electronics into a
cost-effective, durable polycarbonate package the size of a credit card. Thin and
flexible enough to be carried in a wallet, the ProxCard II replaces the thick, rigid
cards previously associated with proximity technology. Complete with a vertical slot
punch and external card numbering. These cards are not suitable for direct image
printing.
Image
Part number
Description
Coding
Dimensions
BA6541351000
ProxCard II, prox card
Unprogrammed
1.8 mm
BA6541351100
ProxCard II, prox card
26 bit
BA6541351200
ProxCard II, prox card, AC 4+4, Continuum
32 bit
BA6541351300
ProxCard II, prox card, I/NET
32 bit
BA6541351400
ProxCard II, prox card, Continuum
37 bit
25
Electronic Access Control
Proximity Technology
HID Cards
IsoProx II
The ultra-thin IsoProx II card offers proximity technology and photo identification on
a single access control card. A photo ID can be printed directly onto the card using
a direct image printer.
Image
Part number
Description
Coding
Surface
Dimensions
BA6541352000
IsoProx II prox card
Unprogrammed
Graphics
0.84 mm
BA6541352100
IsoProx II prox card
26 bit
BA6541352200
IsoProx II prox card, AC 4+4, Continuum
32 bit
BA6541352300
IsoProx II prox card, I/NET
32 bit
BA6541352400
IsoProx II prox card, Continuum
37 bit
Smart IsoProx II
The Smart ISOProx II card meets requirements for proximity access control, network
access, data security, debit transactions, parking, health information storage and
photo ID with a single card. Offers universal compatibility with all HID proximity
readers. This card can accommodate custom artwork, direct image printing, magnetic
stripes, bar codes and contact smart chip modules.
Image
Part number
Description
Coding
Surface
Dimensions
BA6541353000
IsoProx II prox card
Unprogrammed
Graphics
0.84 mm
BA6541353100
IsoProx II prox card
26 bit
BA6541353200
IsoProx II prox card, AC 4+4, Continuum
32 bit
BA6541353300
IsoProx II prox card, I/NET
32 bit
BA6541353400
IsoProx II prox card, Continuum
37 bit
DuoProx II
DuoProx II cards combine proximity technology, magnetic stripe technology and
photo identification on a single card. By combining technologies on one card, the
DuoProx II card provides the benefit of proximity technology for access control
applications and meets the requirements for industry standard magnetic stripe
applications. It also offers the ability to print a photo ID directly onto the card with a
direct vinyl printer. Complete with external card numbering.
Image
26
Part number
Description
Coding
Surface
Dimensions
BA6541354000
DuoProx II prox card
Unprogrammed
Graphics
0.84 mm
BA6541354100
DuoProx II prox card
26 bit
BA6541354200
DuoProx II prox card, AC 4+4, Continuum
32 bit
BA6541354300
DuoProx II prox card, I/NET
32 bit
BA6541354400
DuoProx II prox card, Continuum
37 bit
Electronic Access Control
Proximity Technology
HID Cards
ProxKey II Fob
The ProxKey II Fob incorporates proximity technology into a device the size of a car
key. Small and convenient, the ProxKey II is always there when you need it.
Image
Part number
Description
Coding
Dimensions
BA6541355000
ProxKey II Fob, (Grey)
Unprogrammed
BA6541355100
ProxKey II Fob, (Grey)
26 bit
48 mm x
23 mm x
9 mm
BA6541355200
ProxKey II Fob, (Grey) AC 4+4, Continuum
32 bit
BA6541355300
ProxKey II Fob, (Grey) I/NET
32 bit
BA6541355400
ProxKey II Fob, (Grey) Continuum
37 bit
ProxPass Active Vehicle Tag
The ProxPass Active Vehicle Tag is an active tag specifically designed for
vehicle access control. Providing convenient access control for parking and fleet
management applications, Provides a 1200 mm to 2400 mm read range. Velcro
backing attaches easily to interior of vehicle windshield. Compatible with MaxiProx®
reader and all HID card formats and offers a two to five year battery life, depending
on usage.
Image
Part number
Description
Coding
Surface
Thickness
BA6541356000
ProxPass Active Vehilcle Tag
Unprogrammed
Brushed
7.6 mm
BA6541356100
ProxPass Active Vehilcle Tag
26 bit
BA6541356200
ProxPass Active Vehilcle Tag, AC 4+4,
Continuum
32 bit
BA6541356300
ProxPass Active Vehilcle Tag, I/NET
32 bit
BA6541356400
ProxPass Active Vehilcle Tag, Continuum
37 bit
27
Electronic Access Control
Proximity Technology
Indala Readers
Indala FlexPass readers provide a stylish way to manage the accessibility of critical
places, people, goods and information. Suitable for both indoor and outdoor use.
Please note that one of the enhanced security features of the Indala product range
is that the bit format of the reader and the card must be identical to correctly
decode the encrypted data on the card.
FlexPass Arch Slim Reader
The FlexPass Arch Slim Reader is designed to mount onto a doorframe or other
small location. Operating from an input voltage of 4-16 VDC, the maximum read
range is up to 127 mm using FlexCard® standard cards.
Image
Part number
Description
Colour Termination Physical
Dimensions
Power
Supply
Current
Requirements
Weight
BA6542306100
Arch Slim Reader - 26bit
Black
Arch Slim Reader - 32bit AC4+4
BA6542306300
Arch Slim Reader - 32bit I/NET
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
125 g
BA6542306200
4-16
VDC
BA6542306400
Arch Slim Reader - 37bit
BA6542307100
Arch Slim Reader - 26bit
BA6542307200
Arch Slim Reader - 32bit AC4+4
BA6542307300
Arch Slim Reader - 32bit I/NET
BA6542307400
Arch Slim Reader - 37bit
BA6542308100
Arch Slim Reader - 26bit
BA6542308200
Arch Slim Reader - 32bit AC4+4
BA6542308300
Arch Slim Reader - 32bit I/NET
BA6542308400
Arch Slim Reader - 37bit
Fly Lead
114 mm x
43 mm x
20 mm
Grey
Beige
FlexPass Wave Slim Reader
The FlexPass Wave Slim Reader is designed to mount onto a doorframe or other
small location. Operating from an input voltage of 4-16 VDC, the maximum read
range is up to 127 mm using FlexCard® standard cards.
Image
28
Part number
Description
Colour Termination Physical
Dimensions
Power
Supply
Current
Requirements
Weight
Black
4-16
VDC
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
170 g
BA6542309100
Wave Slim Reader - 26bit
BA6542309300
Wave Slim Reader - 32bit I/NET
BA6542309400
Wave Slim Reader - 37bit
Fly Lead
140 mm x
43 mm x
28 mm
Electronic Access Control
Proximity Technology
Indala Readers
FlexPass Arch WallSwitch Reader
The FlexPass Arch WallSwitch Reader is ideal for indoor and outdoor locations.
Operating from an input voltage of 4-16 VDC, the maximum read range is up to 127
mm using FlexCard® standard cards.
Image
Part number
Description
Colour
Termination Physical
Dimensions
Power
Supply
Current
Requirements
Weight
BA6542311100
Arch WallSwitch Reader
26bit
Black
Fly Lead
Arch WallSwitch Reader
32bit AC4+4
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
139 g
BA6542311200
4-16
VDC
at reader
BA6542311300
Arch WallSwitch Reader
32bit I/NET
BA6542311400
Arch WallSwitch Reader
37bit
BA6542312100
Arch WallSwitch Reader
26bit
BA6542312200
rch WallSwitch Reader
32bit AC4+4
BA6542312300
Arch WallSwitch Reader
32bit I/NET
BA6542312400
Arch WallSwitch Reader
37bit
BA6542313100
Arch WallSwitch Reader
26bit
BA6542313200
Arch WallSwitch Reader
32bit AC4+4
BA6542313300
Arch WallSwitch Reader
32bit I/NET
BA6542313400
Arch WallSwitch Reader
37bit
114 mm x
76 mm x
20 mm
Grey
Beige
29
Indala Readers
Electronic Access Control
Proximity Technology
FlexPass Wave WallSwitch Reader
The FlexPass Wave WallSwitch Reader is ideal for indoor and outdoor locations.
Operating from an input voltage of 4-16 VDC, the maximum read range is up to 127
mm using FlexCard® standard cards.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
BA6542310100
Wave WallSwitch Reader
26 bit
Black
Fly Lead
4-16
VDC
Wave WallSwitch Reader
32 bit I/NET
96 mA
@ 12 VDC;
100 mA
@ 5 VDC
170 g
BA6542310300
140 mm x
84 mm x
28 mm
BA6542310400
Wave WallSwitch Reader
37 bit
FlexPass Arch Mid-Range Reader
The FlexPass Arch Mid-Range Reader is ideal for applications with heavy traffic. Its
design provides easy installation on any surface, including metal without reducing
read range. Operating from an input voltage of 4-16VDC, the maximum read range
is up to 305 mm using FlexCard® standard cards.
Image
30
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
BA6542314100
Arch Mid-Range Reader
26 bit
Black
Fly Lead
4-16
VDC
Arch Mid-Range Reader
32 bit AC4+4
140 mA
@ 12 VDC;
82 mA
@ 5 VDC
393 g
BA6542314200
130 mm x
155 mm x
28 mm
BA6542314300
Arch Mid-Range Reader
32 bit I/NET
BA6542314400
Arch Mid-Range Reader
37 bit
BA6542315100
Arch Mid-Range Reader
26 bit
BA6542315200
Arch Mid-Range
32 bit AC4+4
BA6542315300
Arch Mid-Range
32 bit I/NET
BA6542315400
Arch Mid-Range Reader
37 bit
BA6542316100
Arch Mid-Range Reader
26 bit
BA6542316200
Arch Mid-Range Reader
32 bit AC4+4
BA6542316300
Arch Mid-Range Reader
32 bit I/NET
BA6542316400
Arch Mid-Range
37 bit
Grey
Beige
Indala Readers
Electronic Access Control
Proximity Technology
FlexPass Wave Mid-Range Reader
The FlexPass Wave Mid-Range Reader is ideal for applications with heavy traffic. Its
design provides easy installation on any surface, including metal without reducing
read range. Operating from an input voltage of 4-16VDC, the maximum read range
is up to 305 mm using FlexCard® standard cards.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
Requirements
Weight
BA6542323100
Wave Mid-Range Reader
- 26 bit
Black
Fly Lead
4-14
VDC
Wave Mid-Range Reader 32 bit I/NET
140 mA
@ 12 VDC;
82 mA
@ 5 VDC
393 g
BA6542323300
140 mm x
163 mm x
35 mm
BA6542323400
Wave Mid-Range Reader
- 37 bit
31
Indala Readers
Electronic Access Control
Proximity Technology
FlexPass KeyPad Reader
The FlexPass KeyPad Reader combines both a proximity reader and a keypad in a
small, attractive package for applications where additional security is required from
both an access card and a personal identification number (PIN). Waterproof and
vandal resistant, it is suitable for both indoor and outdoor applications without the
need for any additional housing.
Image
32
Part number
Description
Colour
Termination Physical
Power
Dimensions Supply
Current
Weight
requirements
BA6542318100
KeyPad Reader
26 bit
8 bit burst
Beige
Fly Lead
BA6542318200
KeyPad Reader
32 bit AC4+4
8 bit burst
91 mA
@ 12 VDC 100
mA
@ 5 VDC
BA6542318300
KeyPad Reader
32 bit I/NET
8 bit burst
BA6542318400
KeyPad Reader
37 bit
8 bit burst
BA6542319100
KeyPad Reader
26 bit
8 bit burst
BA6542319200
KeyPad Reader
32 bit AC4+4
8 bit burst
BA6542319300
KeyPad Reader
32 bit AC4+4
8 bit burst
BA6542319400
KeyPad Reader
37 bit
8 bit burst
BA6542320100
KeyPad Reader
26 bit
4*3 matrix
BA6542320200
KeyPad Reader
32 bit AC4+4
4*3 matrix
BA6542320400
KeyPad Reader
37 bit
4*3 matrix
BA6542321100
KeyPad Reader
26 bit
4*3 matrix
BA6542321200
KeyPad Reader
32 bit AC4+4
4*3 matrix
BA6542321400
KeyPad Reader
37 bit
4*3 matrix
Black
Beige
Black
116 mm x 76
mm x
17 mm
4-16 VDC
473 g
Indala Readers
Electronic Access Control
Proximity Technology
FlexPass Arch Long-Range Reader
The FlexPass Arch Long-Range Reader is designed for applications requiring
maximum read range and is ideal for parking or physically challenging
environments; (ADA requirement). Other uses such as concealment behind or within
thick building materials, take advantage of the readers bi-directional (equally from
both sides) read capability, providing both access and egress from a single reader.
Operating from an input voltage of 12-24 VDC, the maximum read range is up to
711 mm using FlexCard® standard cards.
Image
Part number
Description
Colour
BA6542322100
Arch Long-Range
Reader
26 bit
Black
BA6542322200
Arch Long-Range
Reader
32 bit AC4+4
BA6542322300
Arch Long-Range
Reader
32 bit I/NET
BA6542322400
Arch Long-Range
Reader
37 bit
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
284 mm x 284
mm x
46 mm
12-24 VDC
1 A/750 mA
500 g
33
Electronic Access Control
Proximity Technology
Indala Cards
Indala’s FlexPass high-quality range of cards and key tags provide a highly secure
solution as the access control data is scrambled on the card and can only be
read correctly by a reader with the matching scramble table. The card data is then
transmitted by the reader to the host system in the correct Wiegand, ABA Track II
or Serial format. Indala FlexSecur® option goes one step further and screens out
unauthorized cards prior to sending programming data on the host system. The
additional verification step enhances the security of your access system in three
ways:
n The entire data field is scrambled prior to programming the card Therefore, the
data on the card cannot be decoded to determine the actual information on the
card.
n The information on the card is locked and only the reader has the key to unlock
this scrambled data. By matching the reader key with the lock, the programming
data is translated for the host system. If the two do not match the reader denies the
user access, and does not send the invalid information to the host.
n Readers can be programmed for each site, protecting the end user by making
each site unique for readers as well as cards.
FlexPass Adhesive Tag
The FlexPass Adhesive Tag can turn your plastic ID badge into a proximity
credential. Effortlessly upgrade from magnetic stripe or barium ferrite technology, or
add prox to your smart card, by attaching the FlexTag™ to your existing card. The
FlexTag™ will also adhere to any non-metallic device, such as a cell phone or PDA,
to create an instant proximity badge.
Image
Part number
Description
Coding
Dimensions
BA6542350000
FlexPass Adhesive Tag
Unprogrammed
Diameter 33 mm
Thickness 1.8 mm
BA6542350100
FlexPass Adhesive Tag
26 bit
BA6542350200
FlexPass Adhesive Tag, AC4+4, Continuum
32 bit
BA6542350300
FlexPass Adhesive Tag, I/NET
32 bit
BA6542350400
FlexPass Adhesive Tag, Continuum
37 bit
FlexCard® Standard Card
The FlexCard® Standard proximity card is ideal for applications that require a robust
card that is flexible and light. Its vertical design is well suited for use as a badge,
and the FlexCard® can accept a variety of ID badge overlays.
Image
34
Part number
Description
Coding Surface
Dimensions
BA6542351100
FlexCard® Std Card
26 bit
1.8 mm
BA6542351200
FlexCard® Std Card, AC4+4, Continuum
32 bit
BA6542351300
FlexCard®
32 bit
BA6542351400
FlexCard® Std Card, Continuum
Std Card, I/NET
37 bit
Non-Printable
Indala Cards
Electronic Access Control
Proximity Technology
FlexISO® Imagable Prox Card
The FlexISO® Imagable Proximity Card is a credit card thin access credential, which
is ISO 7813 compliant with nominal thickness of 0.76 mm. The FlexISO® Proximity
Card comes with a graphics quality surface on both sides of the card, and has
the ability to contain multiple ID technologies in a single credential. The FlexISO®
proximity Card can be combined with a magnetic strip, Wiegand code strip, bar
code, a multitude of smart chips and MIFARE®.
Image
Part number
Description
Coding
Surface
Dimensions
BA6542352100
FlexISO® Imagable Prox Card
26 bit
Graphics
0.76 mm
BA6542352200
FlexISO® Imagable Prox Card, AC4+4, Continuum
32 bit
BA6542352300
FlexISO® Imagable Prox Card, I/NET
32 bit
BA6542352400
FlexISO®
37 bit
BA6542353100
FlexISO® Imagable Prox Card c/w Magnetic stripe
26 bit
BA6542353200
FlexISO® Imagable Prox Card c/w Magnetic stripe, AC4+4,
Continuum
32 bit
BA6542353300
FlexISO® Imagable Prox Card c/w Magnetic stripe, I/NET
32 bit
BA6542354400
FlexISO® Imagable Prox Card c/w Magnetic stripe,
Continuum
37 bit
Imagable Prox Card, Continuum
FlexKey® Fob
The FlexKey® Fob’s contemporary design enables it to be easily attached to a key
ring, badge clip or badge lanyard. Built to withstand harsh operating environments,
FlexKey®’s rugged double-sealed construction also allows for customisation. By
adding a company logo, the FlexKey® is ideally suited for vacation resorts, locker
rooms, health spas, apartment buildings, club houses, as well as commercial office
spaces and industrial applications where photo ID’s are not required.
Image
Part number
Description
Coding
Dimensions
BA6542355100
FlexKey® Fob
26 bit
BA6542355200
FlexKey® Fob, AC4+4, Continuum
32 bit
44 mm x 30 mm x
6 mm
BA6542355300
FlexKey® Fob, I/NET
32 bit
BA6542355400
FlexKey®
37 bit
Fob, Continuum
35
Electronic Access Control
Proximity Technology
Idesco Readers
Idesco access control readers have been developed for reliable and
secure access control, data collection and person identification in various
environments. Good performance and robustness ensure functionality even in
the harshest environments. These readers have been added to the TAC EAC
portfolio as they offer an aesthetically pleasing style.
Access 7A Reader
The Access 7A Reader can be used in the most demanding surroundings. Its
excellent performance and robustness ensures optimal functionality also in harsh
environments. The basic housing is internationally registered and suitable for
indoor and outdoor usage and can be installed directly onto metal surfaces without
additional insulation. The Access 7A range of readers makes use of serial number
technology provided in a 26bit format.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6543301000
Access 7A Reader
(Black Lense)
Black
1m Fly Lead
110 mm x
43 mm x
24 mm
24 VDC
(8-30 VDC)
30 mA
(50 mA Max.)
244 g
Access 7A Quattro Reader
The square format of the Access 7A Quattro Reader is designed for mounting
directly onto any electrical back box. The mounting unit of the reader is equipped
with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant
snap-on cover is placed on the mounting unit. The Access 7A range of readers
makes use of serial number technology provided in a 26bit format.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6543302000
Access 7A Quattro
Reader
Black
1m Fly lead
86 mm x
86 mm x
17 mm
24 VDC
(8-30 VDC)
30 mA
(50 mA Max.)
315 g
Access 7A PIN Reader
The Access 7A PIN Reader improves security in access control by providing PIN
code identification to be used together with an identification card. The keypad of
the reader is based on EMFi foil technology. The EMFi foil senses the pressure
changes on the active key area when pressed. There are no moving parts in the PIN
pad, and due to this no maintenance is required. The Access 7A range of readers
makes use of serial number technology provided in a 26bit format.
Image
36
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6543303000
Access 7A
PIN Reader
(Black Lens)
Black
1m Fly Lead
138 mm x
44 mm x
24 mm
24 VDC
(8-30 VDC)
30 mA
(50 mA max.)
325 g
Idesco Readers
Electronic Access Control
Proximity Technology
Access 8AH Reader
The Access 8AH Reader guarantees that the reader can be used in the most
demanding surroundings. Its excellent performance and robustness ensures
optimal functionality also in harsh environments. The Basic housing is internationally
registered and suitable for indoor and outdoor usage and can be installed directly
onto metal surfaces without additional insulation. This reader is compatible with HID
cards making it ideal if transition to this style is preferred.
Image
Part number
Description
Colour
BA6543304000
Access 8AH Reader (HID Black
Compatible, Black Lense)
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
1m Fly Lead
110 mm x
43 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA Max.
244 g
Access 8AH Quattro Reader
The square format of the Access 8AH Quattro Reader is designed for mounting
directly onto any electrical back box. The mounting unit of the reader is equipped
with installation holes; ideal for fixing to plaster walls or other surfaces. An elegant
snap-on cover is placed on the mounting unit. This reader is compatible with HID
cards making it ideal if transition to this style is preferred.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6543305000
Access 8AH
Quattro Reader
(HID Compatible, Black
Lens)
Black
1m Fly Lead
86 mm x
86 mm x
17 mm
24 VDC
(10-30 VDC)
130 mA Max.
315 g
Access 8AH PIN Reader
The Access 8AH PIN Reader improves security in access control by providing PIN
code identification to be used together with an identification card. The keypad of
the reader is based on EMFi foil technology. The EMFi foil senses pressure changes
on the active key area when pressed. There are no moving parts in the PIN pad, and
due to this no maintenance is required. This reader is compatible with HID cards
making it ideal if transition to this style is preferred.
Image
Part number
Description
Colour
BA6543306000
Access 8AH PIN Reader
Black
(HID Compatible, Black
Lens), 8bit burst Wiegand
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
1m Fly Lead
138 mm x
44 mm x
24 mm
24 VDC
(10-30 VDC)
130 mA Max.
325 g
37
Electronic Access Control
Proximity Technology
Idesco Cards
Idesco offers a wide range of 125 kHz tags and cards. Typical applications
for these products include access control, time and attendance and asset
marking.
EM 4102 Card
The EM 4102 PVC Card has good printability with thermal transfer
and dye-sublimation printers.
Image
Part number
Description
Surface
Thickness
BA6543350000
EM 4102 Card,
Serial Number Format
Graphics
1.4 mm
Coin Tag
The epoxy laminated Coin Tag is easy to fix
in a convenient leather key ring.
Image
Part number
Description
Dimensions
BA6543351000
Coin Tag – EM 2402 A (4102), Serial
No Format
24 mm x 2 mm
Leather Coin Tag Key ring
To be used with the 125kHz Coin Tags.
Image
Part number
Description
Dimensions
BA6543352000
Leather Coin Tag Key ring,
Serial No Format
63 mm x 35 mm
Sail Tag
The Sail Tag key ring is very robust and beautifully
designed for everyday use.
Image
38
Part number
Description
Dimensions
BA6543353000
Sail Tag – EM 4102,
Serial No Format
55 mm x 30 mm
HID Readers
Electronic Access Control
Wiegand Swipe Technology
Wiegand technology is a mature standard and works by embedding small
lengths of special wire into a card. This process offers a medium to high level
of security. Wiegand cards take longer than most to produce, so consideration
should be given to this when ordering. This technology is for legacy systems
only and should not be used for new systems.
HID – Readers
As one of the leading manufacturers of Radio Frequency Identification Devices,
HID produces a line of Wiegand and proximity products for access control. Meeting
virtually any access control requirements, HID’s range of access cards and readers
combine technology, performance and value. The HID line of Wiegand-effect
readers are moulded from rugged high impact plastic to resist vandals. They are all
epoxy potted to seal out moisture, are immune to external magnetic fields, operate
in temperatures from -40°c to 70°c, and are suitable for indoor and outdoor use.
Classic Swipe Reader
The HID Wiegand Classic Swipe is a pass-through reader. It can be back mounted
on a vertical surface and the slot may be orientated upward, downward, facing left
or right. It performs well in high volume installations and may be exposed to sun,
rain or snow.
Image
Part number
Description
Colour
BA6541201000
Classic Swipe
Black
BA6541202000
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
Terminal Strip
58 mm x
135 mm x
43 mm
5-12 VDC
40 mA typical
343 g
2m Fly lead
Turnstile Reader
The HID Wiegand Turnstile Reader is a pass-through reader. It is usually bottommounted on a horizontal surface such as a turnstile support, but may also be
mounted on a wall with the slot aligned vertically. It performs well in high-volume
and high-wear installations and may be exposed to sun, rain, or snow.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6541203000
Turnstile Reader
Black
2m Fly Lead
45 mm x
178 mm x
45 mm
5-12 VDC
40 mA typical
567 g
BA6541204000
Chrome
39
Electronic Access Control
Wiegand Swipe Technology
HID Cards
These access cards from HID include an embedded Wiegand code strip that
provides many possible codes. The cards are laminated under pressure to become
solid vinyl when finished. It is virtually impossible to counterfeit, alter or copy these
cards. Any attempt to reach the code strip destroys the cards. It should be noted
that due to the relatively complex manufacturing techniques adopted for this
technology lead times for orders are often 6 to 10 weeks. A minimum order quantity
of 100 cards is required.
SensorCard
The SensorCard is a basic vinyl Wiegand-encoded card that is strong and flexible
for resistance to breakage, and reliable over a broad range of temperatures and
humidities. Three thicknesses are available: the ISO thin 0.76 mm, standard 0.94
mm and an external wear 1.2 mm. Please note over time fewer variants of these
cards will be available.
Image
Part number
Description
Coding
Surface
Thickness
BA6541250000
SensorCard, Wiegand
37 bit
brushed
0.94 mm
BA6541251000
SensorCard,
Wiegand AC4+4,
32 bit
brushed
0.94 mm
BA6541252000
SensorCard, Wiegand
26 bit
brushed
0.94 mm
BA6541253000
SensorCard, Wiegand,
37 bit
graphics
0.76 mm
BA6541253010
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.76 mm
BA6541253020
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.76 mm
BA6541253030
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.76 mm
BA6541254000
SensorCard, Wiegand
37 bit
graphics
0.94 mm
BA6541254010
SensorCard, Wiegand,
custom artwork*
37 bit
graphics
0.94 mm
BA6541255000
SensorCard, Wiegand
37 bit
graphics
1.2 mm
BA6541256000
SensorCard,
Wiegand AC4+4
32 bit
graphics
0.94 mm
* Please note a minimum order quantity of 500 cards applies for these products.
The custom artwork cards are dedicated to specific customers.
40
Electronic Access Control
Wiegand Swipe Technology
HID Cards
SensorCard II
The SensorCard II combines Wiegand and magnetic strip technology on a single
card for multiple applications. Strong and flexible, the SensorCard II can be
supplied with a graphics quality surface for use with all direct image printers and
magnetic stripe readers. Please note over time fewer variants of these cards will be
available.
Image
Part number
Description
Coding
Surface
Thickness
BA6541257000
SensorCard II, Wiegand, c/w magnetic
stripe
37 bit
brushed
0.76 mm
BA6541258000
SensorCard II, Wiegand, c/w magnetic
stripe
37 bit
graphics
0.76 mm
BA6541258010
SensorCard II, Wiegand,
c/w magnetic stripe, custom artwork*
37 bit
graphics
0.76 mm
BA6541259000
SensorCard II, Wiegand, c/w magnetic
stripe
26 bit
graphics
0.76 mm
* Please note a minimum order quantity of 500 cards applies for these products.
The custom artwork cards are dedicated to specific customers.
ProxCard Plus
The ProxCard Plus card incorporates a combination of proximity, Wiegand and
optional magnetic stripe for multiple applications, or for transitioning from a
primarily Wiegand technology arrangement to HID proximity based system. With all
graphics quality surface as standard the Proxcard Plus is suitable for use with direct
image printers, all Wiegand readers and most magnetic stripe readers. Please note
over time fewer variants of these cards will be available.
Image
Part number
Description
Coding
Thickness
BA6541260000
ProxCard Plus,
Wiegand / proximity
37 bit
1.20 mm
BA6541261000
ProxCard Plus,
Wiegand / proximity
26 bit
0.94 mm
BA6541262000
ProxCard Plus,
Wiegand / proximity
with magnetic stripe
37 bit
0.94 mm
41
Indala Readers and Cards
Electronic Access Control
Magnetic Swipe Technology
Magnetic Stripe technology is the most basic and most traditional form of access
control. Due to higher security needs this technology is becoming less favoured.
The basic operation relies on a magnetic stripe on the back of the card that gets
swiped into a reader. This technology is for legacy systems only and should not be
used for new systems.
Indala – Readers
Magnetic Stripe Readers from Indala bring superior magneto-resistive, read-head
technology to the security industry. This magnetic reader head technology, which
is widely employed in the reading of information from high-density magnetic disk
drives, has proven ideal for even the most demanding access control card reader
applications.
5000 Series 5 Volt, Mag Stripe Dorado Reader
5000 Series 5 Volt, Mag Stripe Dorado Readers are external, metal housed, swipe
card readers configured to read ISO track 2 of a magnetic stripe card. The readers
incorporate state of the art heated magneto-resistive read heads, LED indication,
and fully encapsulated electronics, allowing operation in harsh environments.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6542101000
5000 Series 5 Volt,
Mag Stripe Dorado
Reader
Black
3m Fly lead
113 mm x
45 mm x
39 mm
5VDC
45 mA typical
409 g
Chrome
BA6542102000
ABA Swipe Reader with Keypad
The ABA Swipe Reader with Keypad offers added security for external use. The
heavy-duty metal case with stainless steel keypad protects against vandalism and
external damage, whilst the integral heating element enables operation in harsh
temperatures. The reader reads ISO track 2 and provides a 26 bit Wiegand output.
Image
Part number
Description
Colour
Termination
Physical
Dimensions
Power
Supply
Current
requirements
Weight
BA6542103000
ABA Swipe Reader with
Keypad –
8 bit burst Wiegand
Grey
Terminal blocks
137 mm x
90 mm x
47 mm
5 VDC
40-50 mA typical
1.1 kg
BA6542104000
ABA Swipe Reader with
Keypad –
4*3 matrix Wiegand
Pre-programmed Magnetic Stripe
Indala Pre-programmed Magnetic Stripe cards are for use with the ABA magnetic
stripe readers. They are ABA encoded and include the matching card number on
the back for easy identification.
Image
42
Part number
Description
Thickness
BA6542150000
Pre-programmed Magnetic Stripe
Credit Card
Electronic Access Control
Appendix
Obsolete product table
Part Number
Old Andover Part Numbers / Obsolete Items
BA6541201000
M01-7000-345
BA6541202000
M01-7000-121
BA6541203000
M01-7000-108
BA6541204000
M01-7000-109
BA6541250000
M01-7001-147
M01-7001-064
M01-7001-046
M01-7001-148
BA6541251000
M01-7001-069
M01-7001-158
M01-7001-160
M01-7001-153
BA6541252000
M01-7001-232
M01-7001-230
M01-7001-234
M01-7001-231
BA6541253000
M01-7001-169
BA6541253010
M01-7001-169CA
BA6541253020
M01-7001-062CA
BA6541253030
M01-7001-062CB
BA6541254000
M01-7001-062
BA6541254010
M01-7001-062CC
BA6541255000
M01-7001-139
BA6541256000
M01-7001-009
BA6541257000
M01-7001-151
BA6541258000
M01-7001-236
BA6541258010
M01-7001-236C
BA6541259000
M01-7001-246
BA6541260000
M01-7001-195
BA6541262000
M01-7001-193
BA6541301000
M01-7000-122
BA6541302000
M01-7000-123
BA6541303000
M01-7000-124
BA6541304000
M01-7000-125
BA6541305000
M01-7000-117
BA6541306000
M01-7000-118
BA6541307000
M01-7000-247
BA6541308000
M01-7000-248
BA6541309000
M01-7000-012
BA6541310000
M01-7000-013
BA6541311000
M01-7000-142
BA6541312000
M01-7000-143
BA6541313000
M01-7000-144
BA6541314000
M01-7000-145
BA6541315000
M01-7000-111
BA6541316000
M01-7000-112
BA6541317000
M01-7000-213
BA6541318000
M01-7000-214
BA6541319000
M01-7000-113
BA6541320000
M01-7000-114
BA654-1321000
M01-7000-119
BA6541350000
M01-7001-003
BA6541350100
M01-7001-004
BA6541350400
M01-7001-003
BA6541351000
M01-7001-166
BA6541351100
M01-7001-219
BA6541351400
M01-7001-166
M01-7001-071
BA6541352000
M01-7001-140
M01-7001-141
BA6541352100
M01-7001-141
BA6541352400
M01-7001-140
BA6541353000
M01-7001-140SM
BA6541353400
M01-7001-140SM
M01-7001-149
M01-7001-150
M01-7001-152
M01-7001-004
M01-7001-071
M01-7001-219
43
Electronic Access Control
Appendix
Obsolete product table
(continued)
Part Number
Old Andover Part Numbers / Obsolete Items
BA6541354000
M01-7001-142
BA6541354200
M01-7001-143
BA6541354400
M01-7001-142
BA6541355000
M01-7001-073
BA6541355100
M01-7001-221
BA6541355400
M01-7001-073
BA6541356000
M01-7001-188
BA6541356400
M01-7001-188
BA6542101000
M01-7000-51D2B
BA6542102000
M01-7000-51D2C
BA6542103000
M01-7000-6MW1M
BA6542104000
M01-7000-6MDD1
BA6542150000
MAND-ABA
BA6542306100
M01-7000-171B-26
654-2303-100
M01-7000-140B-26
BA6542306200
M01-7000-171B-32
654-2303-200
M01-7000-140B-32
BA6542306300
IN-FP4511A
654-2303-300
BA6542306400
M01-7000-171B-37
654-2303-400
M01-7000-140B-37
BA6542307100
M01-7000-171G-26
654-2304-100
M01-7000-140G-26
BA6542307200
M01-7000-171G-32
654-2304-200
M01-7000-140G-32
BA6542307300
IN-FP4515A
654-2304-300
BA6542307400
M01-7000-171G-37
654-2304-400
M01-7000-140G-37
BA6542308100
M01-7000-171T-26
654-2305-100
M01-7000-140T-26
BA6542308200
M01-7000-171T-32
654-2305-200
M01-7000-140T-32
BA6542308300
IN-FP3517A
654-2305-300
IN-FP3516A
BA6542308400
M01-7000-171T-37
654-2305-400
M01-7000-140T-37
BA6542309300
IN-FP1511A
IN-FP1514A
BA6542310300
IN-FP1521A
IN-FP1524A
BA6542311100
M01-7000-173B-26
BA6542311200
M01-7000-173B-32
BA6542311300
IN-FP4521A
BA6542311400
M01-7000-173B-37
BA6542312100
M01-7000-173G-26
BA6542312200
M01-7000-173G-32
BA6542312300
IN-FP4525A
BA6542312400
M01-7000-173G-37
BA6542313100
M01-7000-173T-26
BA6542313200
M01-7000-173T-32
BA6542313300
IN-FP4527A
BA6542313400
M01-7000-173T-37
BA6542314100
M01-7000-200B-26
BA6542314200
M01-7000-200B-32
BA6542314400
M01-7000-200B-37
BA6542315100
M01-7000-200G-26
BA6542315200
M01-7000-200G-32
BA6542315300
IN-FP3235A
BA6542315400
M01-7000-200G-37
BA6542316100
M01-7000-200T-26
BA6542316200
M01-7000-200T-32
BA6542316400
M01-7000-200T-37
BA6542317100
M01-7000-200W-26
BA6542318100
M01-7000-166-26
BA6542318200
M01-7000-166-32
BA6542318300
IN-FP5067B
44
M01-7001-143
M01-7001-221
IN-FP4526A
IN-FP4517A
IN-FP4516A
Electronic Access Control
Appendix
Obsolete product table
(continued)
Part Number
Old Andover Part Numbers / Obsolete Items
BA6542318400
M01-7000-166-37
BA6542319100
M01-7000-167-26
BA6542319200
M01-7000-167-32
BA6542319300
IN-FP5061B
BA6542319400
M01-7000-167-37
BA6542320100
M01-7000-211-26
BA6542320200
M01-7000-211-32
BA6542320400
M01-7000-211-37
BA6542321100
M01-7000-212-26
BA6542321200
M01-7000-212-32
BA6542321400
M01-7000-212-37
BA6542322100
M01-7000-223B-26
BA6542322200
M01-7000-223B-32
BA6542322400
M01-7000-223B-37
BA6542351100
M01-7001-092-26
M01-7001-135
BA6542351200
M01-7001-092-32
M01-7001-067
BA6542351300
IN-FPCRD
BA6542351400
M01-7001-092-37
M01-7001-134
BA6542352100
M01-7001-167-26
M01-7001-226
BA6542352200
M01-7001-167-32
BA6542352300
IN-FPISO
BA6542352400
M01-7001-167-37
BA6542353100
M01-7001-168-26
M01-7001-227
BA6542353200
M01-7001-168-32
M01-7001-189
BA6542354400
M01-7001-168-37
BA6542355100
M01-7001-094-26
BA6542355200
M01-7001-094-32
BA6542355300
IN-FPKEY
BA6542355400
M01-7001-094-37
M01-7001-136
M01-7001-224
45
Part number description
Electronic Access Control
The ten digit part numbering system used for our electronic access control products
is built from the following information blocks. It provides a ready reference to the
specification of the item concerned, and helps avoid errors in order placement.
B A654
Primary Reference used
for all EAC parts
X
X
XX
Technology/Product Type:
1 = Magnetic Stripe
2 = Wiegand Swipe
3 = 125 KHz Proximity
4 = 13.56 MHz Mifare
5 = 13.56 MHz i-Class
9 = Biometrics
XX
X
Readers:
Bit Format
1X = 26 Bit
2X = 32 Bit AC 4+4
Continuum
3X = 32 Bit I/NET
4X = 37 Bit Continuum
5X = 66 Bit I/NET
Cards:
Bit Format/Site Codes:
Sequential Numbering
Supplier reference:
1 = HID
2 = Indala
3 = Idesco
46
1-49 = Readers
50-99 = Cards
Variant: i.e. colour, wire,
length, termination, etc.
Revision Number
47
Make the most of your energy
Beschikbare catalogi:
Andover Continuum
Electronic Access Control
HVAC Sensoren
Kleppen en Servomotoren
Satchwell Sigma en Micronet
TAC Vista & I/NET
TAC
Xenta 700
Schneider Electric B.V.
Building Automation
Nederland:
Postbus 836
2003 RV Haarlem
Diakenhuisweg 29-35
2033 AP Haarlem
Tel.: 023 - 5 124 124
Fax: 023 - 5 124 100
E-mail: [email protected]
www.schneider-electric.nl
Building Automation
België:
1180 Brussel
Dieweg 3
Tel.: +32 - (0)2/ 373 77 11
Fax: +32 - (0)2/ 373 40 36
E-mail: [email protected]
Jagersdreef 1a
Tel. : +32 - (0)3/ 636 24 10
BUILDINGAUTOMATION-CAT.-03/NL2008
Schneider Electric sa/nv
2900 Schoten
Fax : +32 - (0)3/ 636 32 10
E-mail: [email protected]
www.schneider-electric.be
Standaarden, specificaties en ontwerpen kunnen van tijd tot tijd wijzigen. Daarom raden wij u
aan om altijd een bevestiging te vragen van de informatie in dit document. TAC, Andover, Pelco
en Satchwell zijn geregistreerde merken van Schneider Electric.
Gedrukt op gerecycled papier.
06/2008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement