DVIGear: DVI-7310 Single-Link DVI Fiber Extender

DVI-7310

Single-Link DVI Fiber Optic Extender

Product Description:

Designed to overcome the barriers of sending digital DVI signals over copper wires, the DVI-7310 Fiber Optic

Extender provides unequalled signal fidelity and transparency over a wide range of input resolutions and supports cable lengths up to 500 meters (1,640 ft.). The unit consists of a high-speed optical transmitter module that converts the DVI input signals into light pulses for transmission over 4 detachable glass fibers, and an optical receiver module that converts the light pulses back to a DVI signal for display on a monitor or projector. A programmable memory chip provides EDID support for any display without the need for a copper cable. These features make the DVI-7310 the ideal solution for critical display applications that demand flawless DVI signal quality over very long cable runs.

Key Features:

• Supports HDTV resolutions up to 1080p

• Supports PC resolutions up to 1600x1200 and 1920x1200

• Supports digital bit-rates up to 1.65 GBit/sec.

• Optical fiber transmission is immune to environmental signal noise

• Low RFI / EMI profile for sensitive application

• Built-in programmable EDID memory - eliminates the need for DDC connection

• Transmitter unit can be powered by DVI source or by optional +5VDC external power supply

• Receiver unit is powered by +5VDC external power supply

• Detachable optical cables greatly simplify installation and maintenance

DVIGear, Inc. 1059 Triad Court • Suite 8 • Marietta, GA • 30062-2258 www.dvigear.com • 888.463.9927 toll free • 770.421.6699 phone • 770.234.4207 fax

Specifications:

Connections

DVI Input / DVI Output:

Optical:

Power:

Resolution

PC:

HDTV:

Bandwidth

Pixel Rates:

Bit Rates:

Optical

Optical Transmitter:

Optical Receiver:

Fiber Cable:

Cable Construction

Custom Lengths:

Cable Jacket:

Cable Outside Diameter:

DDC Support

EDID Support:

HDCP Support:

Power

Optical Transmitter:

Optical Receiver:

External Power Supply:

Power Consumption:

Mechanical

Construction:

Connector Dimensions (L x W x H):

Weight:

Environmental

Operation:

Storage:

Relative Humidity:

Compliance

This product is RoHS and CE compliant

DVI-7310

Single-Link DVI Fiber Optic Extender

25-pin Male DVI-D connectors

4x LC fiber optic connectors

3.5mm jack

Supports all Single-Link DVI resolutions up to 1600x1200 and 1920x1200

Supports HDTV resolutions up to 1080p and 2048x1080

Supports pixel clock rates up to 165 MHz

Supports digital signal bit rates up to 1.65 GBit/sec.

Tx Module: 850 nm VCSEL, Class 1 laser product

Rx Module: PIN Photo Diode

50/125μ multi-Mode Fiber with 4x LC connectors

Available on request, maximum length = 500 meters / 1,640 ft.

OFNP, Plenum Rated PVC Jacket (Blue), or (Red, Green, Blue, Orange)

2.9 x 6.0 mm (Zip cable)

An EDID memory built into the Tx module can learn and store the display’s EDID info, thereby eliminating the need for a DDC connection using copper cables.

HDCP communications are NOT supported!

Tx module requires at least 175 ma of DC current from pin 14 of DVI (source) connector.

Optional external power supply may be used if needed.

Must be powered using the supplied external power supply

Input: 100-240VAC, 50-60Hz 0.2A / Output: +5VDC @ 0.5A

Maximum: 1.8 watts (for both Tx and Rx units)

High impact plastic enclosure with metallic finish

2.75” x 1.56” x 0.59” (69.8 mm x 39.5 mm x 15.0 mm)

Net Weight: 0.14 lb. / 65g Shipping Weight: 1.0 lb. / 454g

32° to 122° F / 0° to 50° C

-4° to 158° F / -20° to 70° C

10% - 80%

DVIGear, Inc. 1059 Triad Court • Suite 8 • Marietta, GA • 30062-2258 www.dvigear.com • 888.463.9927 toll free • 770.421.6699 phone • 770.234.4207 fax