Camera Power
Adapter www.laviewusa.com
BNC Cable
Power Splitter
We recommend testing all the cameras and cables prior to installation.
1
VIDEO IN
1
3 4
2
Camera
IN
x 4
LAN
Wireless Router
Not Included
4
OPTIONAL
USB HDMI VGA LAN RS-485 12V
HDTV
1080p
HDMI
OR
2
PC Monitor
1920x1080
VGA
USB
12V
DVR Adapter
3
Mouse
QUICK START GUIDE
Step 1. Connect your cameras
•
•
•
Connect the green BNC plug and red power plug of the siamese cable into the camera
Connect the opposite green BNC plug and red power plug into the camera power splitter as well as video in connector on the DVR (Repeat 3x)
Connect the power splitter into camera power supply
Step 2. Connect to your monitor/TV
• Connect your DVR and TV/monitor with a HDMI or
VGA cable (Not included)
Note: Your monitor/TV must support the output resolution of the
DVR or you may get a black screen or a possible error message. You cannot use a laptop as a display.
Step 3. Connect the mouse and power
•
• Connect the mouse to the USB port
Connect the 12V DVR power adapter to the DVR
Step 4. Connect to your network
(OPTIONAL)
• Connect the LAN port on the DVR to the LAN port on your router via an Ethernet cable for remote viewing on your mobile phone, tablets, PC and Mac
Note: The DVR will still work as a standalone video recorder if you do not have internet connection and skip this step.
Step 5. Configure the start up wizard
• The connection is now completed. Turn on the power switch and follow the start-up wizard on your screen to confirgure the DVR. (next page)
