Magnadyne M9900CDS-QR Quick Reference Guide

Magnadyne M9900CDS-QR is a versatile audio system that offers a wide range of features for your listening pleasure. With AM/FM/weather band capabilities, you can stay updated on news, weather, and your favorite music. The built-in CD player and external CD changer support (if equipped) let you enjoy your music collection in high-quality sound. You can also connect auxiliary sources and Sirius Satellite Radio (if equipped) to expand your listening options.

PDF Download

Document

Quick Reference

Start-up Guide

Basic Operation

POWER

Turning the Unit On and Off: Push the POWER

Selecting Play Source: Push the MODE button to choose a play source:

Radio, Sirius Satellite Radio (if equipped), CD, External CD Changer (if equipped or Auxiliary Sources (if equipped).

Dimming the Display: Push and hold the LOUD button to dim the backlight of the display. Push and hold again to return to normal illumination.

MODE

DIM

LOUD

AS/PS

/ II

MUTE

Sound Settings

Volume: Rotate the VOLUME knob left or right.

Bass, Treble, Balance or Fader: Push the VOLUME knob to scan between the different sound controls. Once the desired function is in the display area rotate the knob left or right to achieve the desired level.

Equalizer: Push the EQ button to choose between preset equalizer settings: Classic, Rock, DSP Off (digital sound processor off),

Flat, Pop and Jazz, as indicated in the display area.

Note: When selecting EQ mode wait a few seconds for the radio to adjust.

Mute: Push the MUTE button to mute the volume level. Press again to return to previous volume level.

Loudness: Push the LOUD button to boost high and low tones at low volume levels.

VOLUME

LOUD

DISP

PUSH SEL/

MENU

MUTE

Sirius Satellite Radio

(if Equipped)

Note: If your Sirius tuner is not activated, call 1-888-539-SIRIUS to activate. The Sirius Tuner ID Number

(ESN) is required during the activation process. Following the instructions below to access the Sirius Tuner

ID Number (ESN):

Push the MODE button until "SIRIUS" appears in the display area. MODE AS/PS

TUNE/TRACK/CH

Push the TUNE button until "DIRECT" appears in the display area. Wait a few seconds and "CH 000" will then appear in the display.

PUSH

SCAN/S-MOD

Push the BAND button and the first 4 digits of the 12 digit Sirius Tuner

ID Number (ESN) will be displayed.

BAND W- BND

Push the DISP button and the last 8 digits of your 12 digit Sirius Tuner

ID Number (ESN) will be displayed.

EQ DISP

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Push the TUNE button to exit.

Selecting Sirius: Push the MODE button until “SIRIUS” appears in the display.

Please be patient as it may take a minute to receive a satellite signal.

Manual Tuning

Push the TUNE button until “NORMAL” appears in the display.

Rotate the TUNE knob to select a station from 01-182.

Category Tuning

1. Push the TUNE button until “CATEGORY” appears in the display.

MODE AS/PS

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Push button

Rotate the

1 or

TUNE

2 to find the desired category.

knob and select a station.

PROGRAM MEMORY

DISC/CAT

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Direct Tuning

Push the TUNE knob until “DIRECT” appears in the display.

Rotate the TUNE knob and select the first digit (0 or 1).

Push the TUNE knob again.

Rotate the TUNE knob and select the second digit (1-8).

Push the TUNE knob again.

Rotate the TUNE knob and select the third digit (1-9). The tuner will start playing the station you have selected when the third digit stops flashing.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

PUSH

SCAN/S-MOD

(Please note that satellite radio signal may be blocked by trees, buildings, bridges or tunnels.)

AM/FM/Weather Band Operation

AM/FM Bands: Push BAND button to select F1, F2, F3, AM1, AM2 or

W (weather band).

Manual Tuning

1. Rotate the TUNE knob left or right and hold until “MANUAL” appears in the display then release knob.

2. Rotate the TUNE knob again left or right until the desired radio station appears in the display.

Scan Tuning

Push the TUNE knob to scan every 5 seconds for a different radio station. To stop scanning push the TUNE knob again.

Seek Tuning

Rotate the TUNE knob left or right then release to seek for a different radio station.

BAND W- BND

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Weather Band: Push the W-BND button for instant weather band operation.

Note: Push the MODE button to return to playback of other sources.

Programming AM/FM Stations: Select a radio station then select a button 1 , 2 , 3 , 4 or 5 and push and hold until it beeps.

The radio station is now programmed to that button.

MEMORY

PROGRAM

Recalling Programmed Radio Stations: Push button

1 , 2 , 3 , 4 or 5 to recall a preprogrammed station.

MEMORY

PROGRAM

REPEAT

BAND W- BND

SHUFFLE

INTRO

Clock Settings

Display Button: Push and hold the DISP button until the clock is flashing in the display.

EQ DISP

Adjusting the Minutes: Rotate the TUNE knob to the Left to adjust the

Minutes.

Adjusting the Hours: Rotate the TUNE knob to the Right to adjust the

Hours. Note the AM/PM indicator.

Note: When correct time displays wait a few seconds to allow the time to program.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

CD Operation

Playing a CD: Insert a CD (label side up) into the CD slot. The CD will auto-load and start playing. Note: If a CD does not auto-load,

Do Not Force into the slot, as you may already have a CD loaded.

CD Track Selection: Rotate the TUNE knob left or right to change the track.

Ejecting a CD: Push the EJECT button to eject a disc.

Pausing a CD: Push the MUTE button to “Pause” disc, press again to resume play.

CD Changer

(If Equipped)

Load CD’s: Insert the CD magazine into the external CD changer.

Selecting the External CD Changer: Push the MODE button until

“CDC” appears in the display.

CD Selection: Push button 1 or 2 to scroll through the selection of CD’s in the CD changer. If a CD is not in one of the trays, the unit will continue until the next CD if found.

CD Track Selection: Rotate the TUNE knob left or right to change the track.

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

EJECT

DIM

LOUD

/ II

MUTE

MODE AS/PS

MEMORY

DISC/CAT

PROGRAM

TUNE/TRACK/CH

PUSH

SCAN/S-MOD

Reset Button: the vehicle's battery condition, and may require resetting the microprocessor if:

• The vehicle has been "jump started" from a dead battery condition.

• The vehicle battery becomes very low and is quick-charged.

ENTER

INTRO

• The vehicle battery is removed and replaced.

Should this condition occur, simply press and release the RESET button on the radio panel using the tip of a ball point pen. All station programming should remain, but you will have to reset the clock.

BAND

DISP

W-BND

M9900CDS-QR

Rev. B 7-11-05

INTRO

EQ DISP

ENTER

BAND W-BND

Hello! I am an AI chatbot specifically trained to assist you with the Magnadyne M9900CDS-QR Quick Reference Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated