ViewZ 9.7-INCH RACK VALUE LED CCTV MONITOR CCTV Monitor User Manual
Below you will find brief information for CCTV Monitor 9.7-INCH RACK VALUE LED CCTV MONITOR. The 9.7-INCH RACK VALUE LED CCTV MONITOR is a 9.7" dual monitor with a resolution of 1024x768 @ 60Hz. It has VGA, AV, and Audio inputs, and can be mounted in a rack. The monitor can also be used as a stand-alone device. The 9.7-INCH RACK VALUE LED CCTV MONITOR has a number of features and functions to help you adjust the picture and sound quality to your liking. You can also use the trigger feature to activate the monitor when needed.
Advertisement
Advertisement
9.7-INCH RACK VALUE
LED CCTV MONITOR
USER MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
SAFETY INSTRUCTION
………………………………………………………….……
CAUTIONS
……………………………………………………………..........................
FCC RF INTERFERENCE STATEMENT
…………………………….......................
CONNECTING WITH EXTERNAL EQUIPMENT ……………………………………
CONTROLS AND FUNCTIONS
………………………………………………………..
MOUNTING GUIDE
……………………………………………………………………..
D-SUB CONNECTOR PIN ASSIGNMENTS
…………………………………………
POWER MANAGEMENT
………………………………………………………………
SPECIFICATIONS
………………………………………………………………………
TROUBLE SHOOTING GUIDE
………………………………………………….........
This Monitor was
Manufactured by ISO 9001
Certified Factory
2 ~ 3
4
5
6
7 ~ 14
15
16
17
18
19
INSTRUCTION MANUAL
………………………………………………………………………. 1
Important Safety Instruction
1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
Apolarized plug has two blades with one wider than the other.
Agrounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the bsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
11. Only use attachment/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped.
2
…………………………………………….……………………………INSTRUCTION MANUAL
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus.
- Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation.
“WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.”
“The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.”
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.
INSTRUCTION MANUAL
………………………………………………………………………. 3
CAUTION
The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
ATTENTION
N
Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être
située ou installée à proximité du matériel et être facile d`accès
▶ NEVER REMOVE THE BACK COVER
Removal of the back cover should be carried out only by qualified personnel.
▶ DO NOT USE IN HOSTILE ENVIRONMENTS
To prevent shock or fire hazard, do not expose the unit to rain or moisture.
This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases.
▶ KEEP IN A WELL VENTILATED PLACE
Ventilation holes are provided on the cabinet to prevent the temperature from rising.
Do not cover the unit or place anything on the top of unit.
▶ AVOID HEAT
Avoid placing the unit in direct sunshine or near a heating appliance.
▶ TO ELIMINATE EYE FATIGUE
Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor.
▶ BE CAREFUL OF HEAVY OBJECT
Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.
4
…………………………………………….……………………………INSTRUCTION MANUAL
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio, TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment.
▶ DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of communications.
INSTRUCTION MANUAL
………………………………………………………………………. 5
BACK
1. TRIGGER IN x(2)
2. AUDIO IN x(2)
3. VIDEO1(AV) IN (BNC Type) x(2)
4. VIDEO1(AV) OUT (BNC Type) x(2)
5. VIDEO2(AV) IN (RCA Type) x(2)
6. VIDEO2(AV) OUT (RCA Type) x(2)
7. VGA x(2)
8. DC 12V x(2)
7
8
3
4
5
6
1
2
6
…………………………………………….……………………………INSTRUCTION MANUAL
FRONT
1. INPUT
Selects VGA or AV inputs.
Selects an option in the OSD.
2. MENU
Activates or exits the OSD.
Moves previous menu or status in the OSD.
3, 4. ▲ / ▼
Moves another option in the OSD.
The
▼ button is auto adjustment function in the VGA input.
5, 6. ◀ / ▶
Adjusts the volume and menu settings.
The ◀ button is mute function.
7. / I (POWER ON/OFF)
Turns the power on or off. There will be a few seconds delay before the display appears.
8. POWER LED
Turned on with VGA or AV signals: Green color.
Turned on with no signal: 1) AV mode: Green color
2) VGA(PC) mode: Blinking green color.
Turned off: LED off.
INSTRUCTION MANUAL
………………………………………………………………………. 7
OSD Menu Description
All picture, sound settings and setup for the monitor can be adjusted in the OSD menu.
(On Screen Display)
To adjust the OSD screen:
1. Press the MENU button to enter the OSD menu.
2.
Press the ▲/▼ buttons to select the desired option. The selected option is highlighted.
3. Press the ▶ button to enter the submenu for adjusting items.
4. Change the value you wish to adjust by using the
▲/▼ buttons.
5. Press the ◀ button to exit the submenu for adjusting items.
6. Press the MENU button to exit the OSD menu.
A. PICTURE
Option
CONTRAST
BRIGHTNESS
HUE
SATURATION
Function
Adjusts intensity of the image.
Adjusts brightness of the screen.
Adjust the hue of picture.
Adjust the saturation of picture.
SHARPNESS
COLOR TEMP
Adjusts sharpness of the picture.
Select the color temp of picture
PICTURE MODE Select the picture mode of picture.
※ Unavailable in RGB-PC Mode.
Value
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
Normal, Warm, Cool
Standard, Cinema, Vivid
8
…………………………………………….……………………………INSTRUCTION MANUAL
B. SOUND
Option
VOLUME
MUTE
Function
Adjust the level of audio volume.
Mutes speaker sound.
Value
0 ~ 100
Off or On
INSTRUCTION MANUAL
………………………………………………………………………. 9
C. PC (Only PC Mode)
Option
CONTRAST
BRIGHTNESS
Function
Adjusts intensity of the image.
Adjusts brightness of the screen.
PC ADJUST
COLOR MODE
Adjusts the PC Mode.
Adjusts the vertically picture position.
PICTURE MODE Adjusts the vertical noise of screen image.
RESOLUTION Adjust the resolution that an user wants.
※ Unavailable in AV Mode (Only PC Mode).
Value
0 ~ 100
0 ~ 100
See the table on Next page
See the table on Next page
Standard, Cinema, Vivid
10
…………………………………………….……………………………INSTRUCTION MANUAL
PC ADJUST
Option Function
AUTO ADJUST Auto geometry adjustment.
H POSITION Adjusts the horizontally picture position.
Value
V POSITION
CLOCK
Adjusts the vertically picture position.
Adjusts the vertical noise of screen image.
PHASE
SEL AUTO
Adjusts the number of horizontal picture elements.
Selects the type of auto adjustment.
1) Manual: Operating the auto adjustment of the screen only the first time.
2) Auto: Operating the auto adjustment every time the resolution is changed
COLOR MODE
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
MANUAL
1)
, AUTO
2)
Cool Gives the white color a bluish tint.
Normal Gives the white color a neutral tint.
Warm Gives the white color a reddish tint.
User
1)
To manually adjust the color tones (Red, Green, and Blue).
1) Unavailable in AV Mode (Only PC Mode).
INSTRUCTION MANUAL
………………………………………………………………………. 11
D.SETUP
OSD
Key Lock
1)
ARC
Option
Language
Function
Sets the language of the OSD menu.
Value
English, German, French,
Italian, Spanish, Nederland and Korea
See the table on Next page Sets the OSD.
Locks all buttons of the monitor.
Sets the screen ratio.
Off or On
AV Mode: 16:9, 1:1, 4:3, 14:9, Zoom1,
Zoom2, Under
See the table on Next page.
Resets the monitor settings to the factory default.
TRIGGER
RECALL
1) How to unlock
- On the front key: Press the MENU and
▲button at the same time over 3 seconds.
12
…………………………………………….……………………………INSTRUCTION MANUAL
OSD
Option
H POSITION
V POSITION
OSD TIMER
TRANSPARENT
TRIGGER
Function
Move OSD horizontally on screen right or left.
Move OSD vertically on screen up or down.
Adjust OSD displaying time.
Adjust OSD transparent.
Value
0 ~ 100
0 ~ 100
5 ~ 60
Off or On
Option
TRIGGER ENABLE
TRIGGER INPUT
BUZZER
TRIGGER TIME
TRIGGER OPTION
Function
Activates the trigger feature.
Selects the input source for the Trigger.
Not Operation
Selects the amount of time, in seconds, that the monitor displays the trigger Input image.
Selects the type of physical trigger input.
Value
Off or On
AV1, AV2, RGB-PC
3 ~ 100
See the table on Next page.
INSTRUCTION MANUAL
………………………………………………………………………. 13
TRIGGER OPTION
N/C(Normally Closed):
The Trigger function is activated when the trigger cable is opened.
N/O(Normally Opened):
The Trigger function is activated when the trigger cable is closed.
High:
The Trigger function is activated when the trigger signal is DC 2~5[V].
Low:
The Trigger function is activated when the trigger signal is DC 0~0.6[V].
Note: In this case, trigger port has high status electrically, so the trigger cable has to have ground(or earth) status to be activated.
14
…………………………………………….……………………………INSTRUCTION MANUAL
Rack mount
465mm
Rack Mounting Holes
187.5mm
INSTRUCTION MANUAL
………………………………………………………………………. 15
▶
PIN ASSIGNMENTS
Pin 1
2
3
4
5
6
7
8
RED VIDEO
GREEN VIDEO
BLUE VIDEO
GROUND
GROUND
RED GROUND
GREEN GROUND
BLUE GROUND
D-SUB
9
10
11
12
13
14
15
SIGNAL CABLE DETECT
GROUND
SDA(for DDC)
H-SYNC.(or H+V SYNC.)
V-SYNC.
CL(for DDC)
▶
ACCESSORY
1. Power adaptor x(2)
2. User
’s manual
3. Cable (PC or HDMI) x(2)
4. Trigger cable (Option) x(2)
5. Stereo cable (Option) x(2)
16
…………………………………………….……………………………INSTRUCTION MANUAL
Power Consumption
Mode
Power Consumption
Turned On
< 16.4W
Turned Off
< 0.5W
LED Indicator
The power management feature of the monitor is comprised of three stages:
Turned on(Green), No signal(AV mode: Green / VGA mode: Blinking green ) and
Turned off(LED off).
Mode LED Monitor Operation
Green Normal Operation
No
Signal
Turned On
AV mode
VGA(PC) mode
Turned Off
Green
Blinking green
LED off
Not Operation
Not Operation
INSTRUCTION MANUAL
………………………………………………………………………. 17
LED-Type
RESOLUTION
(H x V)
FREQUENCY
INPUT SIGNAL
ACTIVE DISPLAY
AREA (H x V)
PACKING
DIMENSIONS
(W x D x H)
WEIGHT
ELECTRICAL
RATINGS
9.7
’’ Dual
9.7
’’ Diagonal AM-TFT (Active-Matrix)
Pixel pitch(mm) : 0.192(H) x 0.192(V)
Brightness: 350cd/m
²
(Typical)
Contrast Ratio: 600:1 (Typical)
Response Time: 35msec (Typical)
1024x768 @60Hz
HORIZONTAL : 31~48KHz,
VERTICAL : 56~60Hz
VIDEO (BNC Type) x(2)
(1ch input 1.0Vp-p,
75Ω terminated, 1ch loop-through out)
VIDEO (RCA Type) x(2)
(1ch input 1.0Vp-p,
75Ω terminated, 1ch loop-through out)
VGA (RGB-PC) x(2)
AUDIO In x(2)
196.608mm x 147.456mm x(2)
575mm x 168mm x 285mm
(22.64
’’ x 6.61’’ x 11.22’’)
Net: 3 kg (6.61 lbs)
Gross: 4.8 kg (10.58 lbs)
12V 1.36A (100-240V~, 50/60Hz)
▶▶
NOTE : Technical specifications are subject to change without notice.
18
…………………………………………….……………………………INSTRUCTION MANUAL
WEEE Symbols
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other
European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
INSTRUCTION MANUAL
………………………………………………………………………. 19
MEMO
L39ME0308 Rev.2

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 9.7" dual monitor
- 1024x768 @ 60Hz resolution
- VGA, AV, and Audio inputs
- Rack mountable
- Trigger feature
- OSD menu