VT/VR4930WDM FM VIDEO WITH BI-DIRECTIONAL DATA PRODUCT SPECIFICATION FEATURES • Frequency Modulation for High Quality Video Transmission • Directly Compatible with All NTSC, PAL, or SECAM CCTV Camera Systems • LED Status Indicators Provide Rapid Indication of Critical Operating Parameters V • Integrated WDM for Greater Reliability • Solid-State Current Limiters on All Power Lines Provide Equipment Protection • Wide Optical Dynamic Range: Optical Attenuators are Never Required DESCRIPTION The IFS VT/VR4930WDM video transmitter/data transceiver and video receiver/data transceiver units utilize frequency modulation for high video transmission quality. These environmentally hardened units provide the simultaneous transmission of video and full-duplex data over one singlemode optical fiber and are ideal for use in unconditioned out-of-plant or roadside installations. Completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera system, all standard pan-tilt-zoom control signals including RS-232, RS-422, and 2-wire RS-485 data are supported. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. LED indicators are provided for rapidly ascertaining equipment operating status, and these units are available in either stand-alone or rack mount configurations. D • NTCIP Compatible • Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. • Robust Design Ensures Extremely High Reliability In Unconditioned Roadside Environments Available at: www. • Comprehensive Lifetime Warranty APPLICATION EXAMPLES .com • A & E Specifications, (CSI) • AutoCAD Drawings • Operation Manuals • Technical Bulletins • CCTV with PTZ Control ORDERING INFORMATION PART NUMBER SINGLEMODE VT4930WDM 9/125µm VR4930WDM ACCESSORIES♦ OPTIONS DESCRIPTION Video Transmitter/Data Transceiver (1310/1550 nm) Video Receiver/Data Transceiver (1550/1310 nm) FIBERS REQUIRED OPTICAL MAX. PWR BUDGET DISTANCE* 1 23 dB 43 miles (69 km) PS-24VACCT 24 volt AC Center Tap Power Supply (Included) PS-24VACCT-230 24 Volt AC Center Tap Power Supply 230 VAC Input (Included if specified at time of order) Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-SC’ to Model Number for SC Optical Connector (For Single-mode equipment only) Add ‘-FC’ to Model Number for FC Optical Connector (For Single-mode equipment only) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) * Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. ♦ All accessories are third party manufactured. International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180 FAX (203) 426-3326 ■ [email protected] ■ For an office near you go to: www.ifs.com With Offices in Asia Pacific ■ Australia ■ Europe ■ Latin America 65 VT/VR4930WDM FM VIDEO WITH BI-DIRECTIONAL DATA TECHNICAL SPECIFICATION CONNECTORS SPECIFICATIONS Optical: Power and Data: Video: VIDEO Video Input: Bandwidth: Differential Gain: Differential Phase: Tilt: Signal-to-Noise Ratio (SNR): 1 volt pk-pk (75 ohms) 5 Hz - 6.5 MHz <3% <3° <1% 60 dB Minimum @ Maximum Optical Loss Budget ST, SC or FC (see ordering information) Terminal Block with Screw Clamps BNC (Gold Plated Center-Pin) ELECTRICAL & MECHANICAL Power: Surface Mount: Rack: Number of Rack Slots: Current Protection: DATA Data Interface: Data Format: Data Rate: Operating Mode: RS-232, RS-422, 2-wire RS-485 NRZ, NRZI, Manchester, Bi-phase DC-100 Kbps (NRZ) Simplex or Full Duplex WAVELENGTH 1310/1550 nm, Singlemode Circuit Board: Size (in./cm.) (LxWxH) Surface Mount: Rack Mount: Shipping Weight: OPTICAL EMITTER Laser Diode ENVIRONMENTAL NUMBER OF FIBERS 1 MTBF: Operating Temp: Storage Temp: Relative Humidity: LED INDICATORS VT Transmitter/ Data Transceiver Unit: • Video Input Sync Presence • Transmitted Data • Received Data • Optical Carrier Detect • Operating Power VT: 24 VAC C.T. @ 300 mA VR: 24 VAC C.T. @ 600 mA From Rack 2 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.1 cm 7.7 x 5.0 x 2.0., 19.6 x 12.7 x 5.1 cm < 2 lbs./0.9 kg > 100,000 hours -40° C to +74° C -40° C to +85° C 0% to 95% (non-condensing)† † May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating. VR Receiver/ Data Transceiver Unit: • Video Output Sync Presence • Transmitted Data • Received Data • Optical Carrier Detect • Operating Power AGENCY COMPLIANCE MADE IN THE USA Federal Supply Schedule Contract No. GS-07F-0049M Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J OPTICAL POWER BUDGET FIBER WAVELENGTH Singlemode 9/125µm 1310/1550 nm TRANSMITTER MODEL OUTPUT VT4930WDM 200 µw (-7 dBm) RECEIVER MODEL SENSITIVITY VR4930WDM 1 µw (-30 dBm) OPTICAL PWR BUDGET MAX. DISTANCE* 23 dB 43 miles (69 km) * Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. SYSTEM DESIGN Video VT4930WDM up to 41 miles (66 km) Video VR4930WDM (Coax) (Coax) ifs International ifs Fiber Systems Incorporated 203.426.1180 Control Data International Fiber Systems Incorporated 203.426.1180 1 Fiber 9/125µm SM Control Data TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected] 16 Commerce Road ■ Newtown, CT 06470 Due to our continued effort to advance technology, product specifications are subject to change without notice. 66
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021