WiFi Network Blu-ray Disc™ Player with Media Library

WiFi Network Blu-ray Disc™ Player with Media Library
OWNER’S MANUAL
WiFi Network Blu-ray Disc™
Player with Media Library
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
BD590
P/NO : MFL62881883
BD592-N-AUSALLK-ENG.indd 1
www.lgusa.com
2010.1.7 12:14:0 PM
BD592-N-AUSALLK-ENG.indd 2
2010.1.7 12:14:2 PM
Safety Information
1
Safety Information
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
BD592-N-AUSALLK-ENG.indd 3
3
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
2010.1.7 12:14:3 PM
4
Safety Information
This device is equipped with a portable battery or
accumulator.
2
Safety Information
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the lile.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
FCC Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
FCC RF Radiation Exposure Statement : This
equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated
with minimum distance 20 cm between the radiator
and your body. End users must follow the specific
operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located
or operating in conjunction with any other antenna
or transmitter.
CAUTION: Regulations of the FCC and FAA prohibit
airborne operation of radio-frequency wireless
devices because their signals could interfere with
critical aircraft instruments.
Responsible Party :
LG Electronics USA, Inc.1000 Sylvan venue
Englewood Cliffs, NJ 07632
TEL. : +1-800-243-0000
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
BD592-N-AUSALLK-ENG.indd 4
2010.1.7 12:14:3 PM
Safety Information
Notes on Copyrights
• Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Center.
• Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
IMPORTANT SAFETY
INSTRUCTIONS
1
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Safety Information
• Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analog signal output, etc.,
of AACS protected contents. The operation of this
product and restrictions on this product may vary
depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
5
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
BD592-N-AUSALLK-ENG.indd 5
2010.1.7 12:14:3 PM
6
Contents
3
Installation
14
1
Safety Information
3
Cautions and Warnings
Connecting to Your TV
14
HDMI Connection
15
What is SIMPLINK?
16
Component Video
Connection
16
Video/Audio (Left/Right)
Connection
17
Resolution Setting
2
18
Preparation
18
Connecting to an Amplifier
via HDMI Output
8
Introduction
Connecting to an Amplifier
19
8
About the “ ” Symbol
Display
Connecting to an Amplifier
via Digital Audio Output
19
8
Symbols Used in this
Manual
Connecting to an Amplifier
via 2 Channel Audio Output
20
8
Supplied Accesorries
20
9
Playable Discs
21
Wired Network Setup
10
File compatibility
22
11
Regional Code
Wireless Network
Connection
11
AVCHD (Advanced Video
Codec High Definition)
22
Wireless Network Setup
11
Certain System
Requirements
25
Compatibility Notes
27
11
25
Connecting to your Home Network
Wired network connection
USB device connection
Playback content in the
USB device
Settings
12
Remote control
27
Adjust the Setup Settings
13
Front panel
27
[DISPLAY] Menu
13
Rear panel
29
[LANGUAGE] Menu
29
[AUDIO] Menu
30
[LOCK] Menu
BD592-N-AUSALLK-ENG.indd 6
31
[NETWORK] Menu
32
[OTHERS] Menu
2010.1.7 12:14:4 PM
7
4
5
Operation
Maintenance
34
General Playback
83
Notes on Discs
37
Advanced Playback
83
Handling the Unit
40
On-Screen display
43
Copying
47
Enjoying BD-LIVE
6
48
Playing a video file and VR disc
Troubleshooting
49
Selecting a subtitle file
85
General
49
Changing subtitle code
page
86
Picture
50
Viewing a photo
51
Options while viewing a
photo
51
Listening to music while
slide show
52
Listening to music
86
Sound
87
Network
1
2
3
7
4
Appendix
53
Audio CD Archiving
88
54
Viewing information from
Gracenote Media Database
Controlling a TV with the Supplied
Remote Control
89
Network Software Update
55
Using the Music Library
91
Area Code List
57
Playing content via your home
network
92
Language code List
93
Trademarks and Licenses
Using the NetCast™ Entertainment
Access
95
Audio Output Specifications
97
Video Output Resolution
98
Specifications
99
Important Information Relating to
Network Services
100
Open source software notice
62
62
Using Netflix
65
Playing VUDU videos
69
Playing CinemaNow videos
72
Playing YouTube™ videos
75
Enjoying Pandora internet
radio
78
Viewing Picasa™ Web
Albums
81
Using the AccuWeather
6
7
8
Warranty
103
BD592-N-AUSALLK-ENG.indd 7
5
8
Limited Warranty
2010.1.7 12:14:4 PM
8
Preparation
2
Preparation
2
Introduction
Preparation
MOVIE-N
Video files in the DLNA
server or PC
MUSIC
Audio files contained in
the USB/Disc/HDD
MUSIC-N
Audio files in the DLNA
server or PC
About the “ ” Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function
explained in this owner’s manual is not
available on that specific media.
PHOTO
Photo files
Supplied Accesorries
Symbols Used in this Manual
NOTE
Indicates special notes and operating features.
Video cable (1)
Audio cables (1)
Remote control (1)
Batteries (2)
CAUTION
Indicates cautions for preventing possible
damages from abuse.
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
BD
DVD
BD-ROM disc
DVD-Video, DVD±R/RW in
Video mode or VR mode
and finalized
AVCHD
DVD±R/RW in AVCHD
format
ACD
Audio CDs
MOVIE
BD592-N-AUSALLK-ENG.indd 8
Nero MediaHome4
Essentials software
CD-ROM (1)
Video files contained in
the USB/Disc/HDD
2010.1.7 12:14:4 PM
Preparation
Playable Discs
Blu-ray Disc
- Discs such as movies that can
be purchased or rented.
- BD-R/RE discs that contain
Movie, Music or Photo files.
DVD-VIDEO (8 cm / 12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD-RW (8 cm / 12 cm disc)
- VR mode, Video mode and
finalized only
- Finalized AVCHD format
- DVD-RW discs that contain
Movie, Music or Photo files.
DVD+RW (8 cm / 12 cm disc)
- Video mode and finalized only
- Finalized AVCHD format
- DVD+RW discs that contain
Movie, Music or Photo files.
NOTE
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
• BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
2
Preparation
DVD±R (8 cm / 12 cm disc)
- Video mode and finalized only
- Supports the dual layer disc
also
- Finalized AVCHD format
- DVD±R discs that contain
Movie, Music or Photo files.
9
• This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
• Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions to ensure
compatible playback.
Audio CD (8 cm / 12 cm disc)
• Hybrid disc have both BD-ROM and DVD (or CD)
layers on one side. On such discs, BD-ROM layer
will be only played back in this player.
CD-R/RW (8 cm / 12 cm disc)
- CD-R/RW discs that contain
audio titles, Movie, Music or
Photo files.
• Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
• You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live System,
you cannot use it on LG player. (Mastered/Live
File System : Disc format system for windows
Vista)
BD592-N-AUSALLK-ENG.indd 9
2010.1.7 12:14:5 PM
10
Preparation
File compatibility
NOTE
Overall
• HD video files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD video
files.
Available File extensions: “.jpg”, “.jpeg”, “.png”,
“.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”,
“.wma”, “.wav”
2
Preparation
•
Available file extensions differ depending
on the DLNA servers.
•
Some wav files are not supported on this
player.
•
The file name is limited to 180 characters.
• This player supports H.264/MPEG-4 AVC profile
Main, High at Level 4.1. For a file with higher
level, the warning message will appear on the
screen.
• This player does not support files that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
•
Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
Video Files
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
Audio Files
Sampling frequency: within 8 - 48KHz (WMA),
within 11 - 48KHz (MP3)
Bit rate: within 8 - 320 kbps (WMA, MP3),
Available resolution size: 1920 x 1080 (W x H)
pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
NOTE
• This unit cannot support the ID3 Tag embedded
MP3 file.
• The total playback time indicated on the screen
may not correct for VBR files.
•
VobSub (.sub) is not available in the
[Home Link] feature.
Playable Codec format: “DIVX3.xx”, “DIVX4.
xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard
playback only), H.264/MPEG-4 AVC, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
Photo Files
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
•
Progressive and lossless compression photo
image files are not supported.
•
Not all the WMA and AAC Audio format is
compatible with this unit.
Sampling frequency: within 32-48KHz (WMA),
within 16-48KHz (MP3)
Bit rate: within 20-320Kbps (WMA), within
32-320Kbps (MP3)
BD592-N-AUSALLK-ENG.indd 10
2010.1.7 12:14:5 PM
Preparation
Regional Code
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the rear of the
unit or “ALL”.
AVCHD (Advanced Video Codec
High Definition)
This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
•
The AVCHD format is a high definition
digital video camera format.
•
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
•
Some AVCHD discs use the “x.v.Color”
format.
•
This player can playback AVCHD discs using
“x.v.Color” format.
•
Some AVCHD format discs may not play
depending on the recording condition.
•
AVCHD format discs need to be finalized.
•
“x.v.Color” offers a wider color range than
normal DVD camcorder discs.
Certain System Requirements
For Dolby® Digital Plus, Dolby TrueHD and DTSHD multi-channel audio playback:
•
An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD,
DTS or DTS-HD) decoder.
•
Main, center, surround speakers and
subwoofer as necessary for chosen format.
2
Compatibility Notes
•
Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Center.
•
Viewing high-definition content and upconverting standard DVD content may
require a HDMI-capable input or HDCPcapable DVI input on your display device.
•
Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
•
Dolby TrueHD, Dolby Digital Plus and DTSHD are supported with maximum 7.1
channels if you use HDMI connection for
the audio output of the unit.
•
You can use the internal hard disk drive
or a USB device to store some disc related
information, including downloaded on-line
content. The disc you are using will control
how long this information is retained.
Preparation
•
11
For high definition video playback:
•
High definition display that has
COMPONENT or HDMI input jacks.
•
BD-ROM disc with high definition content.
•
HDMI or HDCP capable DVI input on your
display device is required for some content
(as specified by disc authors).
•
For up-conversion of standard definition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
BD592-N-AUSALLK-ENG.indd 11
2010.1.7 12:14:6 PM
12
Preparation
Remote control
• • • • • • a• • • • • •
1 (POWER): Switches the
player ON or OFF.
Z (OPEN/CLOSE): Opens and
2
closes the disc tray.
Preparation
0-9 numerical buttons:
Selects numbered options in
a menu or inputs letters in the
keypad menu.
CLEAR: Removes a mark on
the search menu or a number
when setting the password.
REPEAT: Repeats a desired
section or sequence.
• • • • • • b• • • • • •
m/M (SCAN): Searches
backward or forward.
TITLE/POP-UP: Displays the
DVD title menu or BD-ROM’s
pop-up menu, if available.
DISC MENU: Accesses menu
on a disc.
• • • • • • d• • • • • •
Colored (R, G, Y, B) buttons:
Use to navigate BD-ROM
menus. They are also used for
[MOVIE], [PHOTO], [MUSIC],
[Home Link] and [NetCast]
menu.
MARKER: Marks any point
during playback.
x (STOP): Stops playback.
SEARCH: Displays or exits the
search menu.
X (PAUSE): Pauses playback.
• • • • • • c• • • • • •
HOME ( ): Displays or exits
the [Home Menu].
Remove the battery cover
on the rear of the Remote
Control, and insert two R03
(size AAA) batteries with
and matched correctly.
RETURN (O): Exits the menu
or resumes playback. The
resume play function may not
work depending on the BDROM disc.
./> (SKIP): Goes to the
next or previous chapter / track
/ file.
N (PLAY): Starts playback.
Battery Installation
ENTER ( ): Acknowledges
menu selection.
ZOOM: Displays or exits the
[Zoom] menu.
TV Control Buttons: See page
88.
MUSIC ID: When connected
to the network, can provide
information about the current
song while movie playback.
INFO/DISPLAY ( ): Displays or
exits On-Screen Display.
Direction buttons: Selects an
option in the menu.
BD592-N-AUSALLK-ENG.indd 12
2010.1.7 12:14:6 PM
Preparation
13
Front panel
2
f X (PAUSE)
b Disc Tray
g x (STOP)
c Remote Sensor
h ./> (SKIP)
d Display Window
i Z (OPEN/CLOSE)
e N (PLAY)
j USB Port
Preparation
a 1 (POWER)
Rear panel
a DIGITAL AUDIO OUT (COAXIAL)
e LAN port
b VIDEO OUT
f HDMI OUT (Type A, Version 1.3)
c 2CH AUDIO OUT (Left/Right)
g DIGITAL AUDIO OUT (OPTICAL)
d AC power jack
h COMPONENT VIDEO OUT (Y PB PR)
BD592-N-AUSALLK-ENG.indd 13
2010.1.7 12:14:6 PM
14
Installation
3
Installation
Connecting to Your TV
3
Installation
Make one of the following connections,
depending on the capabilities of your existing
equipment.
•
HDMI connection (page 14-15)
•
Component Video connection (page 16)
•
Video connection (page 16)
HDMI Connection
If you have a HDMI TV or monitor, you can
connect it to this player using a HDMI cable
(Type A, Version 1.3). Connect the HDMI jack
on the player to the HDMI jack on a HDMI
compatible TV or monitor.
HDMI Connection
BD Player
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
• Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
• Do not connect the player’s AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
HDMI
Cable
TV
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
BD592-N-AUSALLK-ENG.indd 14
2010.1.7 12:14:7 PM
Installation
NOTE
• If a connected HDMI device does not accept the
audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 17.)
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 28).
• When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
• If there are noises or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5 m (15 ft.)).
What is SIMPLINK?
Some functions of this unit are controlled by
the TV’s remote control when this unit and LG
TV’s with SIMPLINK are connected through
HDMI connection.
Controllable functions by LG TV’s remote
control; Play, Pause, Scan, Skip, Stop, Power Off,
etc.
Refer to the TV owner’s manual for the details
of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
NOTE
3
Installation
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
player and then turn it on again.
15
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
Additional Information for HDMI
•
When you connect a HDMI or DVI
compatible device make sure of the
following:
- Try switching off the HDMI/DVI device
and this player. Next, switch on the
HDMI/DVI device and leave it for around
30 seconds, then switch on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x480p, 1280x720p, 1920x1080i or
1920x1080p video input.
•
Not all HDCP-compatible HDMI or DVI
devices will work with this player.
- The picture will not be displayed properly
with non-HDCP device.
- This player does not playback and TV
screen is changed to black screen.
BD592-N-AUSALLK-ENG.indd 15
2010.1.7 12:14:7 PM
16
Installation
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on
the TV using component video cable. Connect
the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on
the TV using the audio cables.
Component Connection
Video/Audio (Left/Right)
Connection
Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
Connect the left and right AUDIO OUT jacks of
the player to the audio left and right IN jacks
on the TV using the audio cables.
Video/Audio Connection
BD Player
BD Player
3
Installation
Component
video cable
Audio
cable
Video cable
Audio
cable
TV
TV
NOTE
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for the
output. (Refer to “Resolution setting” on page 17.)
BD592-N-AUSALLK-ENG.indd 16
2010.1.7 12:14:8 PM
Installation
Resolution Setting
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME (
).
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
17
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p as follows:
1. Press Z to open the disc tray.
2 Press x (STOP) for more than 5 seconds.
• Since several factors affect the resolution of
video output, see “Video Output Resolution” on
page 97.
3
Installation
3. Use U/u to select [DISPLAY] option then
press i to move to the second level.
4. Use U/u to select the [Resolution] option
then press ENTER ( ) to move to the third
level.
5. Use U/u to select the desired resolution
then press ENTER ( ) to confirm your
selection.
BD592-N-AUSALLK-ENG.indd 17
2010.1.7 12:14:8 PM
18
Installation
Connecting to an
Amplifier
Make one of the following connections,
depending on the capabilities of your existing
equipment.
3
•
HDMI Audio connection (page 18)
•
Digital Audio connection (page 19)
•
2CH Analog Audio connection (page 19)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using
a HDMI cable. You will need to activate the
player’s digital output. (See “[AUDIO] Menu” on
pages 29-30.)
HDMI Connection
BD Player
Installation
Since many factors affect the type of audio
output, see “Audio Output Specifications” for
details (pages 95-96).
About Digital Multi-channel sound
A digital multi-channel connection provides
the best sound quality. For this, you need
a multi-channel Audio/Video Receiver that
supports one or more of the audio formats
supported by your player. Check the receiver
manual and the logos on the front of the
receiver. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
HDMI cable
Receiver/Amplifier
HDMI cable
TV
Connect the amplifier’s HDMI output jack to
HDMI input jack on your TV using a HDMI cable
if your amplifier has HDMI output jack.
BD592-N-AUSALLK-ENG.indd 18
2010.1.7 12:14:8 PM
Installation
Connecting to an Amplifier via
Digital Audio Output
Connecting to an Amplifier via
2 Channel Audio Output
Connect the player’s DIGITAL AUDIO OUT
jack to the corresponding in jack (OPTICAL or
COAXIAL) on your amplifier. Use an optional
digital audio cable. You will need to activate
the player’s digital output. (See “[AUDIO] Menu”
on pages 29-30.)
Connect the Left and Right 2CH AUDIO OUT
jacks on the player to the audio left and right
in jacks on your amplifier, receiver, or stereo
system using audio cables.
19
2CH Analog Audio Connection
Digital Audio Connection
BD Player
BD Player
3
Installation
Audio cable
OR
Coaxial
cable
Optical
cable
Receiver/Amplifier
Receiver/Amplifier
BD592-N-AUSALLK-ENG.indd 19
2010.1.7 12:14:8 PM
20
Installation
Connecting to your
Home Network
Wired Network Connection
Router/Modem
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel or the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such
as software updates, Home Link, BD-LIVE
interactivity and streaming services.
Broadband
service
PC
3
Installation
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not
subject to radio frequency interference.
Please refer to the documentation for your
network device for further instructions.
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example configuration for wired
connection below, this player would be able to
access content from either of the PCs.
PC
LAN cable
NOTE
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
BD Player
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
configurations, please follow the specifications
of your telecommunication carrier or internet
service provider.
• If you want to access content from PCs or DLNA
servers, this player must be connected to the
same local area network with them via a router.
BD592-N-AUSALLK-ENG.indd 20
2010.1.7 12:14:9 PM
Installation
21
Wired Network Setup
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
4. Select [OK] and press ENTER ( ) to apply
network settings.
3
Installation
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
NOTE
5. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
2. The [Connection Setting] menu appear on
the screen. Use U/u to select the [Wired]
and press ENTER ( ).
6. If you select [Test] and press ENTER
( ) at step 5 above, the network
connection status is displayed on the
screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
3. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
BD592-N-AUSALLK-ENG.indd 21
2010.1.7 12:14:9 PM
22
Installation
Wireless Network Connection
Another connection option is to use an Access
Point or a wireless router. In the example
configuration for wireless connection below,
this player would be able to access content
from either of the PCs.
The network configuration and connection
method may vary depending on the
equipment in use and the network
environment.
3
Installation
This player is equipped with an IEEE 802.11n
(2.4 GHz band only) wireless module, which
also supports the 802.11b/g standards. For the
best wireless performance, we recommend
using a IEEE 802.11n certified Wi-Fi network
(access point or wireless router).
Available WiFi standards:
802.11b / 802.11g / 802.11n (single-band 2.4
GHz)
Wireless Network Connection
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
NOTE
Wired internet connection is strongly
recommended. Using the [Home Link] features,
network update and video streaming services
(such as, Netflix, Vudu, CinemaNow and
YouTube™ Videos) with wireless network can be
affected by the household devices using radio
frequencies.
Wireless Network Setup
For the wireless network connection, the
player needs to be set up for network
communication. This adjustment can be done
from the [Setup] menu. Adjust the [NETWORK]
setting as follow. Setting up the access point
or the wireless router is required before
connecting the player to the network.
Preparation
BD Player
Wireless
Communication
PC
Before setting the wireless network, you need
to:
- connect the broadband internet to the
wireless home network.
- set the access point or wireless router.
- note the SSID and security code of the
network.
1. Select the [Connection Setting] option in
the [Setup] menu then press ENTER ( ).
Access Point or
Wireless Router
WAN
Broadband
service
BD592-N-AUSALLK-ENG.indd 22
2010.1.7 12:14:10 PM
Installation
2. The [Connection Setting] menu appear on
the screen. Use U/u to select the [Wireless]
and press ENTER ( ).
23
NOTE
• WEP security mode generally have 4 keys
available on an access point or wireless
router’s setting. If your access point or wireless
router use WEP security, enter the security code
of the key “No.1” to connect on your home
network.
• An Access Point is a device that allows you to
connect to your home network wirelessly.
3. Select [Yes] and press ENTER ( ) to
continue. The new connection settings
reset the current network settings.
[Push Button] – If your access point or
wireless router that supports the Push
Button Configuration method, select this
option and press the Push Button on your
access point or wireless router within 120
counts. You do not need to know the access
point name (SSID) and security code of your
access point or wireless router.
3
Installation
4. The player scans the all available access
points or wireless routers within range and
display them as a list. Use U/u to select an
access point or wireless router on the list,
and then press ENTER ( ).
[Manual] – Your access point may not
be broadcasting its access point name
(SSID). Check your router settings through
your computer and either set your router
to broadcast SSID, or manually enter the
access point name (SSID) in [Manual].
5. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
If you have security on your access point
or wireless router, verify that the WEP or
WPA key that was entered into the player
matches the router’s information exactly.
You need to input the security code as
necessary.
BD592-N-AUSALLK-ENG.indd 23
6. Select [OK] and press ENTER ( ) to apply
network settings.
2010.1.7 12:14:10 PM
24
Installation
7. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
8. If you select [Test] and press ENTER
( ) at step 7 above, the network connection
status is displayed on the screen. You can
also test it on the [Connection Status] in the
[Setup] menu.
Notes on Network Connection:
•
3
Installation
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
off and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
•
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
•
Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
•
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
•
Some internet contents may require a
higher bandwidth connection.
•
Even if the player is properly connected and
configured, some internet contents may
BD592-N-AUSALLK-ENG.indd 24
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
•
Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
•
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
•
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
•
You must use a Router to use xDSL service.
•
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
•
The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
•
The wireless network operate at 2.4GHz
radio frequencies that are also used by
other household devices such as cordless
telephone, Bluetooth® devices, microwave
oven, and can be affected by interference
from them.
•
Turn off all unused network equipment in
your local home network. Some devices
may generate network traffic.
2010.1.7 12:14:10 PM
Installation
For the purpose of the better transmission,
placing the player from the access point as
close as possible.
•
In some instances, placing the access point
or wireless router at least 0.45 m (1.5 ft)
above the floor may improve the reception.
•
Move closer to the access point if possible
or re-orient the player so there is nothing
between it and the access point.
•
The reception quality over wireless depends
on many factors such as type of the access
point, distance between the player and
access point, and the location of the player.
•
Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
USB device
connection
This player can play movie, music and photo
files contained in the USB device.
Playback content in the USB
device
1. Insert a USB device to the USB port until it
fits into place.
3
Installation
•
25
USB device connection
When you connect a USB storage device on
the HOME menu, the player plays a audio
file contained in the USB storage device
automatically. If the USB storage device is
containing various types of files, a menu for
the file type selection will appear.
File loading may takes few minutes depending
on the number of content stored in the USB
storage device. Press ENTER ( ) while [Cancel]
is selected to stop loading.
2. Press HOME (
BD592-N-AUSALLK-ENG.indd 25
).
2010.1.7 12:14:11 PM
26
Installation
3. Select [Movie], [Photo] or [Music] using
I/i, and press ENTER ( ).
4. Select the [USB] option using I/i, and
press ENTER ( ).
NOTE
• This player supports USB flash memory/external
HDD formatted in FAT16, FAT32 and NTFS
when accessing files (music, photo, movie).
However, for BD-LIVE, Audio CD archiving and
file copy to USB storage device, only FAT16
and FAT32 formats are supported. Use the USB
flash memory/external HDD formatted in either
FAT16 or FAT32 when using BD-LIVE, Audio CD
archiving and file copy to USB storage device.
• The USB device can be used for the local storage
for enjoying BD-LIVE discs with Internet.
• This unit can support up to 4 partitions of the
USB device.
3
Installation
• Do not extract the USB device during operation
(play, etc.).
• A USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to
change the device. (DISC, USB or HDD)
5. Select a file using U/u/I/i, and press PLAY
or ENTER ( ) to play the file.
• USB device: USB device that supports USB1.1
and USB2.0.
• Movie, music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
• Regular back up is recommended to prevent
data loss.
• If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
• Some USB device may not work with this unit.
• Digital camera and mobile phone are not
supported.
• USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
6. Withdraw the USB device carefully.
BD592-N-AUSALLK-ENG.indd 26
2010.1.7 12:14:11 PM
Installation
27
4. Use U/u to select a second setup option,
and press ENTER ( ) to move to the third
level.
Settings
Adjust the Setup Settings
You can change the settings of the player in
the [Setup] menu.
1. Press HOME (
).
5. Use U/u to select a desired setting, and
press i or ENTER ( ) to confirm your
selection.
Installation
2. Use I/i to select the [Setup] and press
ENTER ( ). The [Setup] menu appears.
3
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to
your TV type.
3. Use U/u to select the first setup option, and
press i to move to the second level.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to fill the entire screen.
BD592-N-AUSALLK-ENG.indd 27
2010.1.7 12:14:11 PM
28
Installation
1080p Display Mode
NOTE
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
Resolution
Sets the output resolution of the Component
and HDMI video signal. Refer to page 17 and
97 for details about the resolution setting.
3
When the resolution is set to 1080p, select
[24Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
NOTE
• When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [60 Hz].
Installation
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution
best suited to the connected TV. If the
COMPONENT VIDEO OUT is only connected,
this changes the resolution to 1080i as
default resolution.
HDMI Color Setting
[1080p]
Outputs 1080 lines of progressive video.
Select the type of output from the HDMI
OUT jack. For this setting, please refer to the
manuals of your display device.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p]
Outputs 480 lines of progressive video.
• Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of the
video output will be 60 Hz to match the video
source format.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
[480i]
Outputs 480 lines of interlaced video.
BD592-N-AUSALLK-ENG.indd 28
2010.1.7 12:14:12 PM
Installation
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and
on-screen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Other]
Press ENTER ( ) to select another language.
Use number buttons then press ENTER ( )
to enter the corresponding 4-digit number
according to the language code list on
page 92.
[Off ] (Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
[AUDIO] Menu
Each disc has a variety of audio output options.
Set the player’s Audio options according to the
type of audio system you use.
NOTE
Since many factors affect the type of audio output,
see “Audio Output Specifications” on page 95-96 for
details.
3
HDMI / Digital Output
Select the output sound format when a device
equipped with a HDMI or Digital Audio input
jack is connected to the HDMI OUT or DIGITAL
AUDIO OUT jack on this player.
Installation
[Original]
Refers to the original language in which the
disc was recorded.
29
[PCM Stereo]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT
jack to a device with multi-channel digital
decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT
or DIGITAL AUDIO OUT jack to a device with
DTS decoder.
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL
AUDIO OUT and HDMI OUT jack to a device
with LPCM, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS and DTS-HD decoder.
BD592-N-AUSALLK-ENG.indd 29
2010.1.7 12:14:12 PM
30
Installation
DRC (Dynamic Range Control)
NOTE
• When [HDMI] option is set to [PCM Multi-Ch],
the audio may output as PCM Stereo if the PCM
Multi-Ch information is not detected from HDMI
device with EDID.
• If the [HDMI] or [Digital Output] option is set
to [DTS Re-Encode], the DTS Re-Encode audio
is outputted for BD-ROM discs with secondary
audio and the original audio is outputted for the
other discs (like [Primary Pass-Thru]).
When a content encoded in Dolby Digital or
Dolby Digital Plus is playing back, you may
wish to compress the dynamic range of the
audio output (the difference between the
loudest sounds and the quietest ones). This
allows you to listen to a movie at a lower
volume without losing clarity of sound. Set
[DRC] to [On] for this effect.
NOTE
3
Sampling Freq.
(Digital Audio Output)
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete stop
mode.
Installation
[192 kHz]
Select this if your A/V Receiver or Amplifier
is capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz signals.
When this choice is made, this unit
automatically converts any 192 kHz signals
to 96 kHz so your system can decode them.
[48 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz and 96
kHz signal. When this choice is made, this
unit automatically converts any 192 kHz
and 96 kHz signals to 48 kHz so your system
can decode them.
[LOCK] Menu
The [LOCK] settings affect only CinemaNow
movie, BD and DVD playback.
To access the any features in [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER ( ) to create a new
password.
Password
You can create or change the password.
Check the documentation for your A/V
Receiver or Amplifier to verify its capabilities.
[None]
Enter a 4-digit password twice, and press
ENTER ( ) to create a new password.
[Change]
Enter the current password and press ENTER
( ). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
BD592-N-AUSALLK-ENG.indd 30
2010.1.7 12:14:13 PM
Installation
31
If you forget your password
If you forget your password, you can clear it
using the following steps:
1. Remove any disc that might be in the
player.
2. Select [Password] option in the [Setup]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
NOTE
• The [BD Rating] will be applied only for the
BD disc that containing the Advanced Rating
Control.
• For the region using MPAA rating level, refer to
the table below as an example.
BD Rating
0
8
13
17
18
255
MPAA Rating
G
PG
PG-13
R
NC-17
Not restricted
Area Code
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 91.
[NETWORK] Menu
The [NETWORK] settings are needed to use
the software update, BD Live, Home Link and
NetCast features.
BD Rating
Connection Setting
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM
viewing.
If your home network environment is ready to
connect the player, the player needs to be set
the wired or wireless network connection for
network communication. (See “Connecting to
your Home Network” on pages 20-25.)
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
BD592-N-AUSALLK-ENG.indd 31
3
Installation
If you make a mistake before pressing ENTER ( ),
press CLEAR. Then input the correct password.
NOTE
Connection Status
If you want to check the network status on
this player, select the [Connection Status]
options and press ENTER ( ) to check whether
a connection to the network and the internet
have been established.
2010.1.7 12:14:13 PM
32
Installation
BD-LIVE connection
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BDLIVE contents which have content owner
certificates. Internet access and AACS
Online functions are prohibited for all BDLIVE contents without a certificate.
3
Installation
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
Netflix
[Netflix ESN]
Display its unique Netflix ESN (Electronic
Serial Number) that allows you to use the
Netflix streaming.
[Deactivate Netflix]
Deactivates your player. To activate the
Netflix again, see page 62.
[OTHERS] Menu
BD Storage Select
This player can store some BD-ROM disc
related information, including downloaded online content such as movie trailers and special
features into the internal hard disk drive or an
USB device.
[Built-In Storage]
Store the downloaded Blu-ray disc content
on the internal hard disk drive.
[USB Storage]
Store the downloaded Blu-ray disc content
on the connected USB device.
BD Storage Clear
Initializes the BD contents from the built-in
storage or the connected USB storage.
[Built-In Storage]
Delete all the downloaded contents from
the internal hard disk drive.
[USB Storage]
Delete all the downloaded contents from
the connected USB storage.
Deactivate Vudu
You can deactivate your player from your Vudu
account. It is recommended that you do this
if you give your player to someone else who
should not share your Vudu account.
BD592-N-AUSALLK-ENG.indd 32
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX
video.
2010.1.7 12:14:13 PM
Installation
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
Initialize
[Factory Set]
You can reset the player to its original
factory settings.
[Internal HDD Format]
Format the internal hard disk drive. All the
content stored in the internal hard disk
drive will be deleted after the formatting.
NOTE
• If you reset the player to its original factory
settings using [Factory Set] option, you have to
set the network settings, all the activations in
the NetCast again.
• Do not turn off the player while formatting the
internal hard disk drive. It may cause a serious
problems.
3
Installation
NOTE
All the downloaded videos from DivX VOD with
this player’s registration code can only be played
back on this unit.
33
Software
Auto Power Off
The screen saver appears when you leave the
player in stop mode for about 5 minutes. If you
set this option to [On], the unit automatically
turns itself off after the Screen Saver is
displayed for 25 minutes.
Set this option to [Off ] to leave the screen
saver until the unit is operated by the user.
Information
Displays the current software version.
Update
You can update the software by connecting
the unit directly to the software update
server (see page 89-90).
Disclaimer Notice
Press ENTER ( ) to view the notice of Network
Service Disclaimer on page 99.
BD592-N-AUSALLK-ENG.indd 33
2010.1.7 12:14:13 PM
34
Operation
4
Operation
General Playback
5. Select the [Disc] option using I/i, and
press ENTER ( ).
Playing Discs
1. Press Z (OPEN/CLOSE), and place a disc on
the disc tray.
Insert a disc
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to
change the device. (DISC, USB or HDD)
4
Operation
6. Select a file using U/u/I/i, and press B
(PLAY) or ENTER ( ) to play the file.
NOTE
2. Press Z (OPEN/CLOSE) to close the disc
tray.
Playback functions described in this manual are
not always available in every files and media. Some
functions can be restricted depending on many
factors.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
3. Press HOME (
).
4. Select [Movie], [Photo] or [Music] using
I/i, and press ENTER ( ).
BD592-N-AUSALLK-ENG.indd 34
2010.1.7 12:14:14 PM
Operation
To stop playback
Press x (STOP) while playback.
Using the disc menu
BD
DVD
AVCHD
To pause playback
To display the disc menu
Press X (PAUSE) while playback.
Press B (PLAY) to resume playback.
The menu screen may be displayed first after
loading a disc which contains a menu. If you
want to display the disc menu while playback,
press DISC MENU.
To play frame-by-frame
Press X (PAUSE) while movie playback.
Press X (PAUSE) repeatedly to play Frame-byFrame playback.
35
Use U/u/I/i buttons to navigate through
menu items.
To display the Pop-up menu
To scan forward or backward
Press m or M to play fast forward or fast
reverse during playback.
You can change the various playback speeds
by pressing m or M repeatedly.
Some BD-ROM discs contain Pop-up menu
that appears while playback.
Press TITLE/POPUP while playback, and use
U/u/I/i buttons to navigate through menu
items.
While the playback is paused, press M
repeatedly to play various speeds of slow
motion.
To skip to the next/previous
chapter/track/file
During playback, press . or > to go to
the next chapter/track/file or to return to the
beginning of the current chapter/track/file.
Press . twice briefly to step back to the
previous chapter/track/file.
In the [Home Link] menu, there may be
many types of contents in the current folder
together. In this case, press . or > to
go to the previous or next content with same
type.
Resume playback
BD
ACD
DVD AVCHD MOVIE MOVIE-N
MUSIC MUSIC-N
Operation
To slow down the playing speed
4
The unit records the point where you pressed
the x (STOP) depending on the disc.
If “Xx (Resume Stop)” appears on the screen
briefly, press B (PLAY) to resume playback
(from the scene point).
If you press x (STOP) twice or unload the disc,
“x(Complete Stop)” appears on the screen. The
unit will clear the stopped point.
NOTE
• The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
Z (OPEN/CLOSE), etc).
• On BD-Video discs with BD-J, the resume
playback function does not work.
• If you press x (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
BD592-N-AUSALLK-ENG.indd 35
2010.1.7 12:14:14 PM
36
Operation
Playing content contained in
the internal hard disk drive
Searching content in the hard
disk drive by entering file name
1. Press HOME (
If you are having difficulties finding content
inthe hard disk drive, you can search for the
content by entering keyword with the virtual
keyboard
).
1. On the [Movie], [Photo], [Music] or Home
menu, press SEARCH to display the virtual
keyboard.
2. Select [Movie], [Photo] or [Music] using
I/i, and press ENTER ( ).
3. Select the [HDD] option using I/i, and
press ENTER ( ).
4
Operation
2. Use U/u/I/i to select letters then press
ENTER ( ) to confirm your selection on the
virtual keyboard.
This step is needed only when a disc or a
USB device is connected on this unit.
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to
change the device. (DISC, USB or HDD)
3. When you finish entering the keyword,
select [OK] and press ENTER ( ) to display
search result.
4. Select a file using U/u/I/i, and press PLAY
or ENTER ( ) to play the file.
NOTE
• The file requirements are described on page 10.
• You can use various playback functions. Refer to
pages 34-46.
4. Press I/i repeatedly until the search result
is selected, and use U/u to select a desired
content.
5. Press ENTER ( ) to play the content.
BD592-N-AUSALLK-ENG.indd 36
2010.1.7 12:14:15 PM
Operation
Advanced Playback
AVCHD
Repeating a specific portion
BD
DVD
AVCHD
ACD
This player can repeat a portion you have
selected.
Repeat Playback
BD
DVD
MUSIC-N
37
ACD
MUSIC
During playback, press REPEAT repeatedly to
select a desired repeat mode.
BDs/DVDs
A- – Selected portion will be repeated
continually.
Chapter – The current chapter will be
played back repeatedly.
Title – The current title will be played
back repeatedly.
Audio CDs/Audio files
– The current track or file will be
played back repeatedly.
– All the tracks or files will be played
back repeatedly.
– The tracks or files will be played back
in random order.
– All the tracks or files will be
played back repeatedly in random order.
– Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
2. Press ENTER ( ) at the end of the portion.
Your selected portion will be repeated
continually.
3. To return to normal playback, press REPEAT
repeatedly to select [Off ].
NOTE
• You cannot select a portion less than 3 seconds.
• This function may not work on some disc or
titles.
Enlarge the playback image
BD
DVD
PHOTO
4
Operation
To return to normal playback, press REPEAT
repeatedly to select [Off ].
1. While playback, press REPEAT to select [A-]
at the beginning of the portion you wish to
repeat.
AVCHD MOVIE MOVIE-N
1. During playback or pause mode, press
ZOOM to display the [Zoom] menu.
2. Use red (R) or green (G) colored button to
zoom out or in the picture. You can move
through the zoomed picture using U/u/I/
i buttons.
3. To return to the normal picture size, press
yellow (Y) colored button.
NOTE
• If you press > once during Repeat Chapter/
Track playback, the repeat playback cancels.
4. Press RETURN (O) to exit the [Zoom]
menu.
• This function may not work on some disc or
titles.
BD592-N-AUSALLK-ENG.indd 37
2010.1.7 12:14:15 PM
38
Operation
Marker Search
BD
DVD
AVCHD MOVIE MOVIE-N
Using the search menu
BD
DVD
AVCHD MOVIE MOVIE-N
You can start playback from up to nine
memorized points.
Using search menu, you can easily to find the
point where you want to start playback.
To enter a marker
To search a point
1. While playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen briefly.
1. During playback, press SEARCH to display
the search menu.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
4
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
NOTE
2. Press I/i to skip the playback 15 seconds
forward or backward. You can select a
point that you want to skip by pressing and
holding I/i button.
To start playback from a marked
scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to start playback.
3. Press ENTER ( ) to start playback from the
marked scene.
NOTE
• This function may not work depending on discs,
titles, server ability.
• This function may not work on some [Home
Link] content depending on the file type and
ability of the DLNA server.
• This function may not work depending on discs,
titles, server ability.
• All marked points are cleared if the title is in
complete stop (x) mode, the title is changed or
if you unload the disc.
• If the total length of the title is less than 10
seconds, this function is not available.
BD592-N-AUSALLK-ENG.indd 38
2010.1.7 12:14:16 PM
Operation
Changing content list view
Viewing content information
MOVIE MOVIE-N MUSIC MUSIC-N PHOTO
MOVIE MOVIE-N
On the [Movie], [Music], [Photo] or [Home Link]
menu, you can change the content list view.
The player can display the content information.
Method 1
2. Press INFO/DISPLAY ( ) to display the
option menu.
Press red (R) colored button repeatedly.
39
1. Select a file using U/u/I/i.
3. Select the [Information] option using U/u,
and press ENTER ( ).
The file information appears on the screen.
While movie playback, you can display the file
information by pressing TITLE/POPUP.
NOTE
The information displayed on the screen may not
correct comparing actual content information.
4
Operation
Last Scene Memory
BD
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch off the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
Method 2
1. On the content list, press INFO/DISPLAY ( )
to display the option menu.
2. Use U/u to select the [View Change]
option.
• This function may not work depending on the
disc.
• On BD-Video discs with BD-J, the last scene
memory function does not work.
• This unit does not memorize settings of a disc if
you switch off the unit before commencing to
play it.
3. Press ENTER ( ) to change the content list
view.
BD592-N-AUSALLK-ENG.indd 39
2010.1.7 12:14:16 PM
40
Operation
On-Screen display
You can display and adjust various information
and settings about the content.
Displaying content information
on-screen
BD
DVD
i Movie Information – Select this option
and press ENTER ( ) to display movie
information from Gracenote Media
Database (BD/DVD only).
2. Select an option using U/u.
3. Use I/i to adjust the selected option
value.
4. Press RETURN(O) to exit the On-Screen
display.
AVCHD MOVIE MOVIE-N
1. While playback, press INFO/DISPLAY ( ) to
show various playback information.
NOTE
• If no button is pressed for a few seconds, the onscreen display disappears.
4
Operation
a
b
c
• A title number cannot be selected on some
discs.
d
• If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
e
f
g
h
i
a Title – current title number/total number
of titles
b Chapter – current chapter number/total
number of chapters
• Available items may differ depending on discs
or titles.
• To use the [Movie Information] option, the player
must be connected to the broadband internet
for accessing the Gracenote Media Database.
• If the information from the Gracenote Media
Database is either not correct or does not exist,
please contact www.gracenote.com for support.
• LG is a licensee of Gracenote technology and is
not responsible or reliable for information from
the Gracenote Media Database.
c Time – elapsed playing time/total
playback time
d Audio – selected audio language or
channel
e Subtitle – selected subtitle
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect
Ratio
h Picture Mode – selected picture mode
BD592-N-AUSALLK-ENG.indd 40
2010.1.7 12:14:17 PM
Operation
Playing from selected time
BD
DVD
NOTE
AVCHD MOVIE MOVIE-N
1. Press INFO/DISPLAY ( ) during playback.
The time search box shows the elapsed
playing time.
2. Select the [Time] option and then input
the required start time in hours, minutes,
and seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”. If
you enter the wrong numbers, press CLEAR
and enter the correct numbers.
Press I/i to skip the playback 15 seconds
forward or backward.
3. Press ENTER ( ) to start playback from
selected time.
• Some discs allow you to change audio selections
only via the disc menu. In this case, press TITLE/
POP-UP or DISC MENU button and choose the
appropriate audio from the selections on the
disc menu.
• Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
• On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH] in
the on-screen display.
Selecting a subtitle language
BD
DVD
AVCHD MOVIE MOVIE-N
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
• This function may not work on some disc or
titles.
• This function may not work on some [Home
Link] content depending on the file type and
ability of the DLNA server.
2. Use U/u to select the [Subtitle] option.
3. Use I/i to select desired subtitle language.
4
Operation
NOTE
41
4. Press RETURN(O) to exit the On-Screen
display.
NOTE
Hearing a different audio
BD
DVD
AVCHD MOVIE MOVIE-N
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
TITLE/POPUP or DISC MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
2. Use U/u to select the [Audio] option.
3. Use I/i to select desired audio language,
audio track or audio channel.
BD592-N-AUSALLK-ENG.indd 41
2010.1.7 12:14:17 PM
42
Operation
Watching from a different
angle
BD
DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
Changing the Picture Mode
BD
DVD
AVCHD MOVIE MOVIE-N
You can change the [Picture mode] option
while playback.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use U/u to select the [Picture Mode]
option.
2. Use U/u to select the [Angle] option.
3. Use I/i to select desired option.
3. Use I/i to select desired angle.
4. Press RETURN(O) to exit the On-Screen
display.
4. Press RETURN(O) to exit the On-Screen
display.
Setting the [User Setting] option
Changing the TV Aspect Ratio
4
BD
DVD
AVCHD MOVIE MOVIE-N
Operation
You can change the TV aspect ratio setting
while playback.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
1. During playback, press INFO/DISPLAY ( ) to
display the On-Screen display.
2. Use U/u to select the [Picture Mode]
option.
3. Use I/i to select the [User setting] option,
and press ENTER ( ).
2. Use U/u to select the [TV Aspect Ratio]
option.
3. Use I/i to select desired option.
4. Press RETURN(O) to exit the On-Screen
display.
NOTE
If you change the value of the [TV Aspect Ratio]
option in On-Screen display, the [TV Aspect Ratio]
option in the [Setup] menu also be changed.
BD592-N-AUSALLK-ENG.indd 42
4. Use U/u/I/i to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER
( ) to reset the all video adjustments.
5. Use U/u/I/i to select the [Close] option,
and press ENTER ( ) to finish setting.
2010.1.7 12:14:18 PM
Operation
43
4. Use U/u/I/i to select a directory that files
or folders you want to copy are located.
Copying
Copying file(s)/folder(s) to the
internal hard disk drive
You can copy music, photo, video file(s)/
folder(s) from disc/USB storage device to the
internal hard disk drive.
1. Press HOME (
).
5. Press INFO/DISPLAY ( ) to display the
option menu.
6. Use U/u to select [Copy] option, and press
ENTER ( ) to display the [Copy] menu.
7. Use U/u to select a file or a folder you wish
to copy on the menu, and press ENTER ( ).
4
Operation
2. Select [Movie], [Photo], [Music] or [Home
Link] using I/i, and press ENTER ( ).
3. Select the [Disc] or [USB] option using I/i,
and press ENTER ( ).
Repeat this step to select files and folders as
many as you can.
Select all the files and folders on
the current directory.
Selecting a server or a share folder is
needed for [Home Link] menu.
Shows all type of files on the
screen. (Movie, Photo and Music)
Cancels the copying and returns
to the previous screen.
BD592-N-AUSALLK-ENG.indd 43
2010.1.7 12:14:18 PM
44
Operation
8. Use U/u/I/i to select [Start], and press
ENTER ( ).
9. Use U/u/I/i to select the destination
folder to be copied.
Copying file(s)/folder(s) from
the internal hard disk drive to a
USB storage device
You can copy music, photo, video file(s)/
folder(s) from the internal hard disk drive to a
USB storage device.
1. Insert a USB device to the USB port until it
fits into place.
2. Press HOME (
).
10. (Option)
If you want to create a new folder, use U/u/
I/i to select [New Folder] and press ENTER
( ).
3. Select [Movie], [Photo] or [Music] using
I/i, and press ENTER ( ).
4
Operation
4. Select the [HDD] using I/i, and press
ENTER ( ).
Enter folder name using virtual keyboard,
and press ENTER ( ) while [OK] is selected.
11. Use U/u/I/i to select [OK], and press
ENTER ( ) to start copying.
5. Use U/u/I/i to select a directory that files
or folders you want to copy are located.
NOTE
Copying speed may vary depending on the file
size, number of files and network condition.
6. Press INFO/DISPLAY ( ) to display the
option menu.
BD592-N-AUSALLK-ENG.indd 44
2010.1.7 12:14:19 PM
Operation
7. Use U/u to select [Copy] option, and press
ENTER ( ) to display the [Copy] menu.
8. Use U/u to select a file or a folder you wish
to copy on the menu, and press ENTER ( ).
Repeat this step to select files and folders as
many as you can.
Select all the files and folders on
the current directory.
11. (Option)
If you want to create a new folder, use U/u/
I/i to select [New Folder] and press ENTER
( ).
Enter folder name using virtual keyboard,
and press ENTER ( ) while [OK] is selected.
12. Use U/u/I/i to select [OK], and press
ENTER ( ) to start copying.
Shows all type of files on the
screen. (Movie, Photo and Music)
4
Operation
Cancels the copying and returns
to the previous screen.
9. Use U/u/I/i to select [Start], and press
ENTER ( ).
10. Use U/u/I/i to select the destination
folder to be copied.
45
NOTE
Copying speed may vary depending on the file
size, number of files and network condition.
BD592-N-AUSALLK-ENG.indd 45
2010.1.7 12:14:19 PM
46
Operation
Deleting a file(s)/folder(s)
Naming a file/folder
You can delete file(s)/folder(s) from the internal
hard disk drive.
You can re-name a file or a folder in the internal
hard disk drive.
1. Use U/u/I/i to select a directory that files
or a folders you want to delete are located.
1. Select a file or a folder contained in the
internal hard disk drive.
2. Press INFO/DISPLAY ( ) to display the
option menu.
2. Press INFO/DISPLAY ( ) to display the
option menu.
3. Use U/u to select [Delete] option, and press
ENTER ( ) to display the [Delete] menu.
3. Use U/u to select [Rename] option, and
press ENTER ( ) to display the virtual
keyboard.
4 Use U/u to select a file or a folder you wish
to copy on the menu, and press ENTER ( ).
4
Operation
Repeat this step to select files and folders as
many as you can.
Select all the files and folders on
the current directory.
Shows all type of files on the
screen. (Movie, Photo and Music)
Enter a new name using virtual keyboard,
and press ENTER ( ) while [OK] is selected.
NOTE
A just archived audio file(s) from an audio CD
may be unable to be renamed for a while.
Cancels the deletion and returns
to the previous screen.
5 Use U/u/I/i to select [Start], and press
ENTER ( ).
6 Use I/i to select [OK], and press ENTER
( ) to delete the selected files and folders.
BD592-N-AUSALLK-ENG.indd 46
2010.1.7 12:14:20 PM
Operation
Enjoying BD-LIVE
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1
version 1.1/ Final Standard Profile). Secondary
video and audio can be played from a disc
compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
In addition to the BONUSVIEW function, BDVideo supporting BD-LIVE (BD-ROM version
2 Profile 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
3. Set the [BD-LIVE connection] option on the
[Setup] menu (page 32).
Depending on a disc, the BD-LIVE
function may not be operated if [BDLIVE connection] option is set to [Partially
Permitted].
4. Insert a BD-ROM with BD-LIVE.
The operations are differ depending on the
disc. Refer to the manual supplied with the
disc.
CAUTION
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc is
still in the disc tray. Doing so may damage the
connected USB device and BD-LIVE features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC and
reuse it with this player.
2. Set the [BD Storage select] setting in the
[Setup] menu (page 32).
If the [BD Storage Select] option in the
[Setup] menu is set to [USB Storage], a USB
storage device connection is needed to
download bonus content.
USB device connection
BD592-N-AUSALLK-ENG.indd 47
4
Operation
1. Check the network connection and settings
(pages 20-25).
47
NOTE
• Some BD-LIVE contents may be restrictively
accessed in some territories by contents
provider’s own decision.
• It may take up to several minutes to load and
start enjoying BD-LIVE contents.
2010.1.7 12:14:21 PM
48
Operation
Playing a video file
and VR disc
4. Select a file using U/u/I/i, and press B
(PLAY) or ENTER ( ) to play the file.
You can play DVD-RW discs that is recorded
in Video Recording (VR) format and video files
contained in a disc/USB device.
1. Press HOME (
).
NOTE
• The file requirements are described on page 10.
4
2. Select [Movie] using I/i, and press ENTER
( ).
Operation
3. Select [Disc], [USB] or [HDD] option using
I/i, and press ENTER ( ).
• You can use various playback functions. Refer to
pages 34-46.
• Unfinalized DVD VR format discs may not be
played in this player.
• Some DVD-VR discs are made with CPRM data
by DVD RECORDER. This unit cannot support
these kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
‘copy once’ broadcast programs. CPRM stands
for Content Protection for Recordable Media.
This step is needed only when a disc or a
USB device is connected on this unit.
While navigating [Movie], [Photo] or [Music]
menu, press green (G) colored button to
change the device. (DISC, USB or HDD)
BD592-N-AUSALLK-ENG.indd 48
2010.1.7 12:14:21 PM
Operation
Selecting a subtitle file
Changing subtitle code page
MOVIE
MOVIE MOVIE-N
If a video file name and the subtitle file
name are the same, subtitle file is played
automatically when playing the video file.
If the subtitle is not displayed properly, you
can change the subtitle code page to view the
subtitle file properly.
If the subtitle file name is different with the
video file name, you need to select the subtitle
file on the [Movie] menu before playing the
movie.
1. During playback, press INFO/DISPLAY ( ) to
display the playback information.
1. Use U/u/I/i to select the subtitle file you
wish to play in the [Movie] menu.
49
2. Use U/u to select the [Code Page] option.
3. Use I/i to select desired code option.
2. Press ENTER ( ).
4
Press ENTER ( ) again to deselect the
subtitle file. Selected subtitle file will be
displayed when you play the video file.
Operation
4. Press RETURN (O) to exit the playback
information.
NOTE
If you press x (STOP) while playback, the subtitle
selection is cancelled.
BD592-N-AUSALLK-ENG.indd 49
2010.1.7 12:14:21 PM
50
Operation
Viewing a photo
You can view photo files using this player.
1. Press HOME (
To play a slide show
Press B (PLAY) to start slide show.
To stop a slide show
Press x (STOP) while slide show.
).
To pause a slide show
Press X (PAUSE) while slide show.
Press B (PLAY) to re-start the slide show.
To skip to the next/previous photo
2. Select [Photo] using I/i, and press ENTER
( ).
3. Select the [Disc], [USB] or [HDD] option
using I/i, and press ENTER ( ).
While viewing a photo in full screen, press I or
i to go to the previous or next photo.
NOTE
• The file requirements are described on page 10.
4
Operation
• You can use various playback functions. Refer to
pages 34-46.
This step is needed only when a disc or a
USB device is connected on this unit.
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to
change the device. (DISC, USB or HDD)
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
BD592-N-AUSALLK-ENG.indd 50
2010.1.7 12:14:22 PM
Operation
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
51
Listening to music while slide
show
You can display photo files while listening to
audio files.
1. Press HOME (
).
2. Select an option using U/u.
a
b
c
d
e
f
g
h
2. Select [Photo] or [Home Link] using I/i,
and press ENTER ( ).
3. Select the [Disc], [USB] or [HDD] option
using I/i, and press ENTER ( ).
4
Operation
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
c Music Select – Select the background
music for the slide show (page 51-52).
d Music –Press ENTER ( ) to start or pause
background music.
e Rotate – Press ENTER ( ) to rotate the
photo clockwise.
f Zoom – Press ENTER ( ) to display the
[Zoom] menu.
g Effect – Use I/i to select a transition
effect between photos in a slide show.
Selecting a server or a share folder is
needed for [Home Link] menu.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
5. Press INFO/DISPLAY ( ) to display the
option menu.
6. Use U/u to select [Music Select] option,
and press ENTER ( ) to display the [Music
Select] menu.
h Speed – Use I/i to select a delaying
speed between photos in a slide show.
3. Press RETURN(O) to exit the option menu.
BD592-N-AUSALLK-ENG.indd 51
2010.1.7 12:14:22 PM
52
Operation
7. Use U/u to select a device, and press ENTER
( ).
Device that you can select are differ
depending on the location of the photo file
you are displaying in full screen.
Photo location
Available Device
Disc
Disc, USB, HDD
USB
Disc, USB, HDD
Internal HDD
Disc, USB, HDD
Share Folder on
your PC (CIFS)
CIFS
DLNA server
DLNA server
8. Use U/u to select a file or a folder you wish
to play.
Listening to music
The player can play Audio CDs and audio files.
1. Press HOME (
).
2. Select [Music] using I/i, and press ENTER
( ).
3. Select the [Disc], [USB] or [HDD] option
using I/i, and press ENTER ( ).
4
Operation
Select a folder and press ENTER ( ) to
display the lower directory.
Select and press ENTER ( ) to display
the upper directory.
NOTE
When selecting music from [Home Link], folder
selection is not available. Only file selection is
available on the [Home Link].
9. Use U/u/I/i to select [OK], and press
ENTER ( ) to complete music selection.
This step is needed only when a disc or a
USB device is connected on this unit.
While navigating [Movie], [Photo] or [Music]
menu, press green(G) colored button to
change the device. (DISC, USB or HDD)
4. Select a audio file or audio track using
U/u/I/i, and press ENTER ( ) to play the
music.
NOTE
• The file requirements are described on page 10.
• You can use various playback functions. Refer to
pages 34-46.
BD592-N-AUSALLK-ENG.indd 52
2010.1.7 12:14:23 PM
Operation
Audio CD Archiving
You can record one desired track or all of the
tracks in Audio CD to the internal hard disk
drive or a USB storage device.
1. Press OPEN/CLOSE(Z), and place an Audio
CD on the disc tray.
Press OPEN/CLOSE(Z) to close the disc tray.
The playback starts automatically.
2. Press INFO/DISPLAY ( ) to display the
option menu.
3. Use U/u to select [CD Archiving] option,
and press ENTER ( ) to display the [CD
Archiving] menu.
4. Use U/u to select a track you wish to copy
on the menu, and press ENTER ( ).
7. Use U/u/I/i to select a destination folder
to be copied, and press ENTER ( ).
If you want to create a new folder, use U/u/
I/i to select [New Folder] and press ENTER
( ).
Enter folder name using virtual keyboard,
and press ENTER ( ) while [OK] is selected.
8. Use U/u/I/i to select [OK], and press
ENTER ( ) to start Audio CD archiving.
If you want to stop in progressing Audio CD
archiving, press ENTER ( ) while [Cancel] is
highlighted.
9. A message appears when Audio CD
archiving is completed. Press ENTER (
) to check the audio file created in the
destination folder.
NOTE
4
Status
Select all the tracks on an Audio
CD.
Selects an encoding option from
the pop-up menu (128 kbps,
192 kbps, 320 kbps or Lossless).
Cancels the recording and
returns to the previous screen.
5. Use U/u/I/i to select [Start], and press
ENTER ( ).
6. Select the [USB] or [HDD] option using I/i,
and press ENTER ( ).
Device
stop
mode
while
playback
Internal HDD
15 sec.
23 sec.
USB
1.4 min.
2 min.
Operation
• The table below shows the average recording
time from an audio track with 4 minutes of
playback time to an audio file with 192kbps as
an example.
Repeat this step to select tracks as many as
you can.
53
• All times in the above table are approximate.
• Actual recording time for USB storage device
varies depending on the USB storage device’s
ability.
• Make sure that there is minimum of 50MB free
space is needed when recording into the USB
storage device.
• The length of the music should be longer than
20 seconds for the proper recording.
• Do not turn off this player or extract the
connected USB storage device during Audio CD
recording.
This step is needed only when a USB
storage device is connected.
BD592-N-AUSALLK-ENG.indd 53
2010.1.7 12:14:23 PM
54
Operation
The making of unauthorized copies of copyprotected material, including computer programs,
files, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a
criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Viewing information from
Gracenote Media Database
NOTE
• The player must be connected to the broadband
internet for accessing the Gracenote Media
Database.
• If the music information is not in the Gracenote
Media Database, message appears on the
screen.
• If the information from the Gracenote Media
Database is either not correct or does not exist,
please contact www.gracenote.com for support.
• Depending on the cases, it will takes a few
minutes to load music information from the
Gracenote Media Database.
The player can access to the Gracenote Media
Database and loads the music information so
that Track name, Artist Name, Genre and other
text information can be displayed on the list.
• Information may be displayed in English, if your
own language is not available on the Gracenote
Media Database.
4
Audio CD
Operation
When you insert an Audio CD, the player starts
playback automatically and load the music title
from the Gracenote Media Database.
• LG is a licensee of Gracenote technology and is
not responsible or reliable for information from
the Gracenote Media Database.
• This function is not available for NetCast on-line
content and content in DLNA servers.
If there is no music information from the
database, music titles will not appear on the
screen.
Audio file
1. Select an audio file or audio track using
U/u/I/i.
2. Press INFO/DISPLAY ( ) to display the
option menu.
3. Select the [Information] option using U/u,
and press ENTER ( ).
The player accesses to Gracenote Media
Database for the music information.
BD/DVD/Video file
While listening to a music from the movie
playback, press MUSIC ID to start loading
music information from the Gracenote Media
Database.
BD592-N-AUSALLK-ENG.indd 54
2010.1.7 12:14:24 PM
Operation
55
Using the Music Library
The player offers Music Library menu for the
music contents stored in the internal hard disk
drive. The player accesses the Gracenote Media
Database and loads the music information for
all of the music contents in the internal hard
disk drive. You can also manage the music
contents by various categories from the Music
Library menu.
1. Press HOME (
).
2. Select [Music] using I/i, and press ENTER
( ).
3. Select the [HDD] using I/i, and press
ENTER ( ).
Songs – All audio files stored in the internal
hard disk drive are sorted by name in
alphabetical order.
Genre – Audio files stored in the internal hard
disk drive are sorted by genre information
from Gracenote Media Database.
4. Press INFO/DISPLAY ( ) to display the
option menu.
5. Use U/u to select [Library mode] option,
and press ENTER ( ) to display the [Library]
menu.
If you want to return to the directory
mode, press INFO/DISPLAY ( ) and select
[Directory mode] and press ENTER ( ).
Album - All music stored in the internal hard
disk drive are sorted by album title from
Gracenote Media Database in alphabetical
order.
4
Operation
Artist – Music stored in the internal hard
disk drive are sorted by artist name from
Gracenote Media Database in alphabetical
order.
PlayList – Displays audio files you have added
to your playlist or displays audio files using
several filter options.
NOTE
The player must be connected to the Internet
in order to use the Music Library.
6. All the audio files stored in the internal hard
disk drive are sorted by categories with the
music information loaded from Gracenote
Media Database. Use U/u to select a
category.
BD592-N-AUSALLK-ENG.indd 55
2010.1.7 12:14:24 PM
56
Operation
Adding an audio file to your playlist
1. Use U/u/I/i to select a directory that files
you want to add to the playlist are located.
2. Press INFO/DISPLAY ( ) to display the
option menu.
3. Use U/u to select [Add to playlist] option,
and press ENTER ( ) to display the [Add to
playlist] menu.
4. Use U/u to select a file you wish to add to
the playlist, and press ENTER ( ).
Repeat this step to select files as many as
you can.
Deleting an audio file from your
playlist
1. On the Music Library menu, use U/u to
select [PlayList], and press ENTER ( ).
2. Use U/u to select [My Playlist] option, and
press ENTER ( ) to display your playlist.
3. Press INFO/DISPLAY ( ) to display the
option menu.
4. Use U/u to select [Delete from playlist]
option, and press ENTER ( ) to display the
[Delete from Playlist] menu.
5 Use U/u to select a file you wish to add to
the playlist, and press ENTER ( ).
Repeat this step to select files as many as
you can.
4
Operation
Select all the files in the current
directory.
Cancels and returns to the
previous screen.
5. Use U/u/I/i to select [Start], and press
ENTER ( ).
Select all the files in the current
directory.
Cancels and returns to the
previous screen.
6. Use U/u/I/i to select [Start], and press
ENTER ( ).
BD592-N-AUSALLK-ENG.indd 56
2010.1.7 12:14:25 PM
Operation
Playing content via
your home network
The player can browse and play content on
your PC and DLNA certified media servers
connected on your home network.
About DLNA
57
Accessing a DLNA media
server
1. Check the network connection and settings
(pages 20-25).
2. Press HOME (
).
3. Select [Home Link] using I/i, and press
ENTER ( ).
4. Select a DLNA media server from the list
using U/u, and press ENTER ( ).
This Player is a DLNA Certified digital media
player that can display and play movie,
photo and music content from your DLNAcompatible digital media server (PC and
Consumer Electronics).
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies
with DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software
or other devices may be required. Please refer
to the operating instructions for the software
or device for more information.
BD592-N-AUSALLK-ENG.indd 57
4
If you want to rescan available media server,
press the green (G) colored button.
NOTE
Operation
The Digital Living Network Alliance (DLNA)
is a cross-industry organization of consumer
electronics, computing industry and mobile
device companies. Digital Living provides
consumers with easy sharing of digital media
through a wired or wireless network in the
home.
Depending on the media server, this player may
need to get permission from the server.
5. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
2010.1.7 12:14:25 PM
58
Operation
NOTE
• The file requirements are described on page 10.
• You can use various playback functions. Refer to
pages 34-46.
• Because the compatibility and available playback
functions on the [Home Link] menu are tested
on the bundle DLNA server (Nero MediaHome
4 Essentials) environment, file requirements and
playback functions on the [Home Link] menu
may differ depending on media servers.
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing movie, music and photo files stored
on your computer to this player as a DLNAcompatiable digital media server.
NOTE
• The supplied Nero MediaHome 4 Essentials CDROM is a customized software edition only for
sharing files and folders to this player.
• The file requirements on page 10 are not always
compatible. There may have some restrictions
by file features and media server’s ability.
• The supplied Nero MediaHome 4 Essentials
software does not support following functions:
Transcoding, Remote UI, TV control, Internet
services and Apple iTunes
• The thumbnail of the unplayable files can be
displayed in the [My Media] menu, but those
cannot be played on this player.
4
• If there is an unplayable audio file in the [Home
Link] menu, the player skip the file and play the
next file.
Operation
• Playing a movie subtitle files are only available
on DLNA media server created by supplied Nero
MediaHome 4 Essentials software on this player
package.
• The subtitle file name and video file name have
to be the same and located at the same folder.
• The playback and operating quality of the
[Home Link] function may be affected by your
home network condition.
• The files from removable media such as USB
drive, DVD-drive etc. on your media server may
not be shared properly.
BD592-N-AUSALLK-ENG.indd 58
• This manual explains operations with the
English version of Nero MediaHome 4 Essentials
as examples. Follow the explanation referring to
the actual operations of your language version.
Installing Nero MediaHome 4
Essentials
Before you install Nero MediaHome 4
Essentials, check the system requirement
shown below.
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required),
Windows® XP Media Center Edition 2005
(Service Pack 2 or higher), Windows Server®
2003
•
Windows Vista® 64-bit edition (application
runs in 32-bit mode)
•
Hard drive space: 200 MB hard drive space
for a typical installation of Nero MediaHome
stand-alone
•
1.2 GHz Intel® Pentium® III or AMD Sempron
™ 2200+ processors
•
Memory: 256 MB RAM
•
Graphics card with at least 32 MB video
memory, minimum resolution of 800 x 600
pixels, and 16-bit color settings
2010.1.7 12:14:26 PM
Operation
•
Windows® Internet Explorer® 6.0 or higher
Sharing files and folders
•
DirectX® 9.0c revision 30 (August 2006) or
higher
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
On your computer, you must share the folder
contained movie, music and/or photo content
to play them using [Home Link] features.
Start up your computer, and insert the Nero
MediaHome 4 Essentials CD-ROM into your
computer’s CD-ROM drive. An installation
wizard will walk you through the quick and
uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as
follows:
1. Close all Microsoft Windows programs and
exit any anti-virus software that may be
running.
2. Insert the Nero MediaHome 4 Essentials
CD-ROM into your computer’s CD-ROM
drive.
This parts explains the procedure for selecting
the shared folders on your computer.
1. Double-click the “Nero MediaHome 4
Essentials” icon on the desktop.
2. Click [Network] icon on the left and define
your network name in the [Network name]
field. The Network name you enter will be
recognized by your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares]
screen.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you
want to share. The selected folder is added
to the list of shared folders.
4. Click the [Next] button to display the serial
number input screen. Click [Next] to go to
the next step.
7. Click [Start Server] icon to start the server.
6. Click [Typical] and click [Next]. The
installation process is started.
4
Operation
3. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
5. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without
this agreement.
59
NOTE
• If the shared folders or files are not displayed on
the player, click the folder on the [Local Folders]
tab and click [Rescan Folder] at the [More]
button.
• Visit www.nero.com for more information and
software tools
7. If you want to take part in the anonymous
collection of data, select the check box and
click the [Next] button.
8. Click the [Exit] button to complete the
installation.
BD592-N-AUSALLK-ENG.indd 59
2010.1.7 12:14:26 PM
60
Operation
Accessing a share folder from
your PC
NOTE
• The file requirements are described on page 10.
1. Start your PC that connected on your local
area network.
• You can use various playback functions. Refer to
pages 34-46.
2. On your PC, share folders which contain
movie, photo or audio files.
• The thumbnail of the unplayable files can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
3. On the player, check the network
connection and settings (pages 20-25).
4. Press HOME (
• If there is an unplayable audio file in the [Home
Link] menu, the player skips the file and play
next file.
).
• The subtitle file name and video file name have
to be the same and located at the same folder.
5. Select [Home Link] using I/i, and press
ENTER ( ).
• The playback and operating quality of the
[Home Link] function may be affected by your
home network condition.
6. Select a share folder from the list using U/u,
and press ENTER ( ).
• The files on an removable media such as USB
drive, DVD-drive etc. on your PC may not be
shared properly.
4
Operation
• You may experience connection problems
depending on your PC’s environment.
PC requirements
If you want to rescan available share folders,
press the green (G) colored button.
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
Windows 7® (no Service Pack required)
•
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
NOTE
Depending on the share folder, this player may
need to input network user ID and password for
accessing the folder.
NOTE
7. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
BD592-N-AUSALLK-ENG.indd 60
If you use Windows® XP or Windows Vista®, visit link
below for more information on file share settings.
2010.1.7 12:14:26 PM
Operation
Entering a network user ID and the
password
Depending on your PC’s environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the keyboard menu.
61
3. When you finish entering the network user
ID and password, select [OK] using U/u/I/
i and press ENTER ( ) to access the folder.
The network user ID and password will
be remembered after accssing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (R) colored button
to un-tick the [Remember] check box
before accessing the folder.
To enter a letter with an accent mark, select
the letter from extended character set.
Example: Select “D” and then press INFO/
DISPLAY ( ) to display the extended
character set. Use I/i to select “D” or “Ď”
and then press ENTER ( ).
4
Operation
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[Backspace] – Deletes the previous character
at the cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
BD592-N-AUSALLK-ENG.indd 61
2010.1.7 12:14:27 PM
62
Operation
Using the NetCast™
Entertainment Access
Using Netflix
You can use various content services via
Internet with the NetCast Entertainment
Access feature.
You can instantly watch movies (very few new
releases) & TV episodes from Netflix streamed
over the internet to your TV via your LG Blu-ray
disc player.
1. Check the network connection and settings
(pages 20-25).
2. Press HOME (
).
Activating your player
3. Select the [NetCast] using I/i, and press
ENTER ( ).
You must activate your player before you can
use it to watch movies streamed over the
internet from Netflix.
4. Select an option using I/i, and press
ENTER ( ).
1. To watch movies and TV episodes instantly
from Netflix, you must be a netflix member.
4
Netflix – See page 62-64
Operation
Vudu – See page 65-68
CinemaNow – See page 69-72
YouTube™ – See page 72-75
Pandora – See page 75-77
Picasa™ Web Albums– See page 78-80
AccuWeather – See page 81-82
5. While enjoying an on-line content from
NetCast, press blue (B) colored button to go
to the NetCast Home screen.
If you are already a member of Netflix, this
step is not needed.
On your computer, visit:
www.netflix.com/LG
Follow the instructions to become a Netflix
member and get a free trial.
2. On the player, select the [Netflix] option in
the [NetCast] menu using I/i, and press
ENTER ( ).
3. Follow the on-screen instruction until you
see an activation code.
CAUTION
• The content of NetCast services and service
related information, including user interface, is
subject to changes. Please refer to the web site
of each service for most up-to-date information.
• Using NetCast features with wireless network
connection may result in improper streaming
speed by insterference from household devices
that are using radio frequencies.
The activation code appears on the screen.
Note the activation code.
• The background image on the NetCast home
indicates the weather of your favorite city in the
AccuWeather feature.
BD592-N-AUSALLK-ENG.indd 62
2010.1.7 12:14:27 PM
Operation
4. On your computer, visit:
www.netflix.com/activate
63
Filling your instant Queue from the
Netflix web site
Add and manage the movies & TV episodes in
your instant Queue from the Netflix web site.
Your instant Queue also appears on your TV via
your player, so your selections are available to
watch anytime.
1. On your computer, visit:
www.netflix.com
You need to log into your account.
2. Click [Watch Instantly] tab.
You need to log into your account.
5. Enter the activation code, and click
[Activate] icon.
After you activate your player, you’re ready
to add movies & TV episodes to your instant
Queue. You can then use your player’s
remote to browse your instant Queue and
to select and watch titles on your TV.
www.netflix.com/help
or call 1-866-579-7113
3. Find a movie or TV episode you want to
watch, and mouse over the [Play] icon to
reveal additional option.
Operation
For questions regarding the Netflix
service please visit:
4
4. Click [Add to Instant Queue] to add to your
Queue.
NOTE
• If a newer software is needed, a software update
screen will automatically appear when you
select [Netflix] from the NetCast menu. For
details on software updates, see page 89-90.
5. Repeat step 4 to add more movies & TV
episodes to your instant Queue.
• You can deactivate streaming from Netflix to
your player using [Deactivate Netflix] option on
the setup menu (page 32).
BD592-N-AUSALLK-ENG.indd 63
2010.1.7 12:14:27 PM
64
Operation
Filling your instant Queue from your
player
You can add and manage the movies & TV
episodes in your instant Queue from the player.
1. On the player, select the [Netflix] option in
the [NetCast] menu using I/i, and press
ENTER ( ).
3. Use U/u to select [Play], and press ENTER
( ) to start playback.
Button
Operation
B
Starts playing back the movie.
X
Pause a movie while it’s playing.
To resume playing a paused
movie, press B (Play) again.
x/U
Stops the movie and displays
your instant Queue.
ENTER
Pauses playing the movie and
enters frame scanning mode.
I/i
Pauses playing the movie and
enters frame scanning mode.
To scan forward one frame at a
time, press the button again.
m/M
Pauses playing the movie and
scans forward or backward
through the movie. To scan
faster, press the button again.
To play the highlighted scene,
press ENTER ( ) or B(Play).
To resume playing from the
point you paused the movie,
press U.
2. On the [Instant Queue] screen, press U to
select categorized menu bar.
3. Use I/i to select a menu, and press u to
display movies & TV episodes.
4. Use I/i to select a movie or a TV episode,
and press ENTER ( ).
NOTE
4
On the movies or TV episodes screen, you can
move to the next 7 posters using m/M.
Operation
5. Use U/u to select [add to instant Queue],
and press ENTER ( ) to add to your Queue.
Watch Netflix movies & TV episodes
on your TV
After you set up your player and add movies &
TV episodes, you can browse and watch them
on your TV.
1. On the player, select the [Netflix] option in
the [NetCast] menu using I/i, and press
ENTER ( ).
2. Use I/i to select a movie or a TV episode,
and press ENTER ( ).
BD592-N-AUSALLK-ENG.indd 64
NOTE
Even if you use a high-resolution setup, audio/
video quality may be compromised based on the
speed of your broadband internet connection.
Your Internet Service Provider (ISP) determines your
broadband speed. We recommend a minimum
connection speed of 1.5 Mbps. For the best quality
picture, a connection speed of 4.0 Mbps is required.
Sometimes your broadband speed varies based on
your ISP’s network conditions. Contact your ISP if
you have problems maintaining a fast connection
that is reliable, or if you want to increase your
connection speed. Many ISPs offer a variety of
broadband speed options.
2010.1.7 12:14:28 PM
Operation
Playing VUDU videos
65
5. If you are not a member of Vudu yet,
complete the required fields and click
[Create an Account] to become a member.
If you already have a Vudu account, enter
the password in the [Password] field, and
click [login] to complete the activation.
You can browse, search and watch movies &
TV episodes from VUDU streamed over the
internet to your TV via your LG Blu-ray disc
player.
Activating your player
You must activate your player before using
the player to watch movies streamed over the
internet from VUDU.
1. Select [Vudu] in the [NetCast] menu and
press ENTER ( ).
For questions regarding the Vudu
service please visit:
www.vudu.com/support
or call 1-888-554-VUDU(8838)
4
NOTE
• You can deactivate streaming from Vudu to your
player using [Deactivate Vudu] option on the
setup menu (see page 32).
3. Enter your e-mail address for the activation
on the virtual keyboard, and press ENTER
( ) while [Done] icon is highlighted.
Operation
2. Use I/i to select the [FREE HD Rental] and
press ENTER ( ).
Please visit www.vudu.com/docs for the
latest documentation related to this product.
• If a newer software is needed, a software update
screen will automatically appear when you
select [Vudu] from the [NetCast] menu. For
details on software updates, see page 89-90.
Vudu Home menu
After activating your player, you’re ready to use
the Vudu service.
Most Watched – Displays the top 100 movies
rented or purchased the previous week on the
service.
An e-mail will be sent to your e-mail
address for the activation.
4. After you submit your e-mail, you will
receive an activation e-mail from Vudu to
that e-mail address. Click on the activation
URL in the e-mail to activate VUDU.
BD592-N-AUSALLK-ENG.indd 65
New on Vudu –Displays newly available
movies to buy or upcoming movies.
New Trailers – Displays newly available movie
trailers.
Explore Catalog – You can browse movies
or TV shows you want to search from the
categorized options or search by entering
name of the title, actor or director.
2010.1.7 12:14:29 PM
66
Operation
My Vudu - Displays the movies and TV shows
you have bought or rented from categorized
options. You can also browse the movies and
TV shows that you have added to the [MY
WISH LIST].
Parental Controls
Vudu has a flexible parental control feature
which controls the MPAA rating levels to
control browsing, purchasing and viewing as
separate settings.
1. Use I/i to select [Info & Settings] on the
[My Vudu] menu and press ENTER ( ).
2. Use U/u to select [Parental Control] and
press ENTER ( ).
3. Use U/u to select a setting you want to
change, and press ENTER ( ).
4
Operation
4. Enter the passcode using numerical buttons
to change the setting.
If it is the first time to use parental controls,
you will be asked to create passcode. Enter
a 4-digit passcode and enter it again to
verify.
Once you have opted to receive the AVN
channel at http://my.vudu.com, you can access
the [After Dark] option from the [Explore
Catalog] menu.
To manage the visibility of [After Dark], use the
[Parental Controls] menu available in [Info &
Settings]. Use U/u to select [Adult Settings]
option from the [Parental Controls] menu,
and press ENTER ( ) to display the [ADULT
CONTENT SETTINGS] menu.
NOTE
• To disable adult content completely, please visit
http://my.vudu.com.
• If you forget your passcode, call Vudu customer
service to have your passcode reset. Once
your passcode is reset, you can choose a new
passcode in the settings page.
Overscan Settings
Most TVs shift the edges of the television
image, either insetting or cutting off part of
the picture. The Adjust Overscan screen will
provide you with instructions for maximizing
the on-screen viewing surface of your TV.
Select [Overscan Settings] option from the
[Info & Settings] menu. You will use the remote
to move the arrows on the screen and change
the size you are specifying.
Renting and Purchasing videos
After activating your player, you are ready to
buy or rent movies & TV episodes. You can then
use your player’s remote to browse, search and
watch directly on your TV.
1. Select a video you want to buy or rent
from [Vudu] menu. Press ENTER ( ) while
selecting the video thumbnail to display
the [MOVIE DETAILS] or [EPISODE DETAILS].
The [MOVIE DETAILS] or [EPISODE DETAILS]
screen shows the information of the video
such as rating, run time, etc.
2. Use U/u to select [Buy], and press ENTER
( ).
3. Use U/u to select a quality level (HDX, HD
or SD), and press ENTER ( ).
BD592-N-AUSALLK-ENG.indd 66
2010.1.7 12:14:29 PM
Operation
NOTE
• Available quality levels and purchase types
on each movie may differ depending on the
content owner restrictions.
• Vudu offers you a free 2-minute preview of any
movie. By watching the preview, you can also
determine which quality level (HDX, HD or SD)
best suits your available network bandwidth
prior to renting a movie.
• If there is the Preview icon below the movie
poster, press B (PLAY) to play trailer of the
movie.
4. Use U/u to select [Own for $x.xx] or [Rent
for $x.xx], and press ENTER ( ) to confirm
you rental or purchase.
5. Use U/u to select [Watch Now], and press
ENTER ( ) to play the video immediately.
Select [Watch later] or [Download and
Watch Later] to continue browsing.
Operation
X
Pause a movie while it’s playing.
To resume playing
a paused video, press B (PLAY).
x
Stops the movie and displays
previous screen.
ENTER or
INFO/
DISPLAY
Displays the movie info bar
which indicate chapter icon,
quality levels, video quality
indicator and progress bar on
the screen.
m/M
Scans forward or backward
through the movie. To scan
faster, press the button again.
To return to the normal
playback, press B.
• Movies and TV shows are available for rental or
purchase depending on the rights provided by
the content owner.
4
Operation
Button
NOTE
• Rental videos are available for up to 30 days.
Once you start to play the movie, your viewing
period is initiated. Viewing periods differ by
movie, but are typically either 24 or 48 hours.
You may watch the movie as many times as you
like within that time period.
67
NOTE
The smooth playback of movies on the Vudu
service requires a Broadband Internet connection.
Please consult the grid below to determine which
quality level (HDX, HD or SD) best suits your
available network bandwidth.
Video Quality
Internet Bandwidth
SD (480p)
1Mbps to 2.25Mbps
HD (720p)
2.25Mbps to 4.5Mbps
HDX (1080p)
4.5Mbps to 9Mbps
Sometimes your broadband speed varies based on
your ISP’s network conditions. Contact your ISP if
you have problems maintaining a fast
connection that is reliable, or if you want to
increase your connection speed. Many ISPs offer a
variety of broadband speed options.
BD592-N-AUSALLK-ENG.indd 67
2010.1.7 12:14:29 PM
68
Operation
Downloading your owned movie
You can download your purchased movies
to the internal hard disk drive on the player,
so that you can watch downloaded movies
without disturbance caused by network
congestion.
1. Use I/i to select the [My Vudu] in the
Vudu Home, and press ENTER ( ).
2. Use I/i to select the [My Movies] or [My
TV Shows], and press ENTER ( ).
3. Use U/u to select a movie or TV show, and
press ENTER ( ).
The [MOVIE DETAILS] or [EPISODE DETAILS]
screen appears on the screen.
4. Use U/u to select [Add SD/HD/HDX for
Download], and press ENTER ( ).
4
The downloading status is displayed under
the movie poster.
Operation
You can watch other movie or TV show
while downloading.
NOTE
• If you exit the Vudu menu while downloading,
it will be temporarily stopped. The downloading
resumes when you access the Vudu again.
3. Use U/u to select a movie or TV show, and
press ENTER ( ).
The [MOVIE DETAILS] screen appears on the
screen.
4. Use U/u to select [Watch SD/HD/HDX], and
press ENTER ( ).
NOTE
• The playback operations are same as the
operations of streaming playback. Refer to page
66-67 for more detail.
• Downloaded movies and TV shows can only be
played from Vudu menu.
• Playback of a downloaded movie requires an
Internet connection.
Deleting a downloaded movie
1. Use I/i to select the [My Vudu] in the
Vudu Home, and press ENTER ( ).
2. Use I/i to select the [My Movies] or [My
TV Shows], and press ENTER ( ).
3. Use U/u to select a movie or TV show, and
press ENTER ( ).
The [MOVIE DETAILS] or [EPISODE DETAILS]
screen appears on the screen.
• Rental videos are not available for download.
Downloads are queued and downloaded in
order.
4. Use U/u to select [Manage Download], and
press ENTER ( ).
• Download time depends on available
bandwidth.
5. Use U/u to select [Delete SD/HD/HDX from
Disc], and press ENTER ( ).
• Formatting will delete any Vudu downloaded
content (page 33).
Watching downloaded movie
1. Use I/i to select the [My Vudu] in the
Vudu Home, and press ENTER ( ).
Your movie or TV show will be deleted from
the internal hard disk drive.
Visit following web site for latest information
regarding the Vudu download:
http://www.vudu.com/docs
2. Use I/i to select the [My Movies] or [My
TV Shows], and press ENTER ( ).
BD592-N-AUSALLK-ENG.indd 68
2010.1.8 5:2:57 PM
Operation
Playing CinemaNow videos
69
5. On the player, select [CinemaNow] in the
[NetCast] menu and press ENTER ( ).
6. Use U/u/I/i to select the [Settings] and
press ENTER ( ).
You can browse, search and watch movies &
TV episodes from CinemaNow streamed over
the internet to your TV via your LG Blu-ray disc
player.
Activating your player
You must activate your player before using
the player to watch movies streamed over the
internet from CinemaNow.
1. On your computer, visit:
www.cinemanow.com/activate
7. Select [Activate] and press ENTER ( ) to
display the activation code input screen.
2. Enter your [user name] and [password] to
log into your account.
4
Operation
8. Enter the activation code you have noted
using U/u/I/i or numerical buttons, and
press ENTER ( ) while [Activate] is selected.
If you are not a member of CinemaNow yet,
click [GET STARTED] to be a member.
3. Enter the Personal Information, Payment
Information, Gift Code Redemption and
Adult Access Restrictions, and then click
[CONTINUE].
NOTE
To learn more about controlling access to adult
content, please visit:
www.cinemanow.com/adultcheck
4. The activation code number appears. Note
the activation code number.
BD592-N-AUSALLK-ENG.indd 69
For questions regarding the
CinemaNow service please visit:
www.cinemanow.com/support
NOTE
• You can deactivate streaming from the
CinemaNow service on your player using
[De-Activate] option on the [Settings] menu
item.
• User must log in CinemaNow web site to
activate your player. To watch the stream video,
you should browse and buy titles at the player.
2010.1.7 12:14:30 PM
70
Operation
About the CinemaNow menu
Searching for videos
After activating your player, you’re ready to use
the CinemaNow service.
You can search for videos by entering search
words up to 128 characters.
1. Select [Search by title] in the [CinemaNow]
menu and press ENTER ( ).
You can select the [Serach by title] menu
from [Movies]/[TV Shows]
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the keyboard menu.
When you entering the characters, titles
that starts with the letters you are entering
will be displayed on the right.
Movies – The movie list appears on the
screen. Browse movies you want to buy/rent
from the categorized options or search by
selecting the [Search by Title] option.
4
Operation
TV Shows – The TV show list appears on the
screen. You can browse TV episodes you want
to buy from the categorized options or search
by selecting the [Search by Title] option.
Search by Title – Search movies & TV
episodes by entering the title name on the
keyboard menu.
My Videos - Displays the movies & TV
episodes you have bought or rented. You can
browse the videos from categorized options
as well as play the videos from this screen. The
My videos screen is where you can get access
to all your previously rented or purchased
content from any CinemaNow powered by
device.
Wish List – Displays the movies & TV episodes
you have added to your CinemaNow Wish
List. You can buy, rent or remove videos from
the list.
Settings – You can activate or de-activate the
CinemaNow Service from your player. You can
set the check box to only show the titles that
are available for rent.
BD592-N-AUSALLK-ENG.indd 70
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[Backspace] – Deletes the previous character
at the cursor position.
[ABC / abc / #@$] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
3. When you finish entering the search words,
Use U/u/I/i to select a title from the list
shown on the right, and then press ENTER
( ) to display the [Title details] screen of
the video.
2010.1.7 12:14:30 PM
Operation
Renting and Purchasing videos
After activating your player, you are ready to
buy or rent movies & TV episodes. You can then
use your player’s remote to browse, search and
watch directly on your TV.
1. Select a video you want to buy or rent from
[Movies] or [TV Shows] menu. Press ENTER
( ) while selecting the video thumbnail to
display the [Title Details].
5. Select [Watch Now] to play the video
immediately.
Select the [Continue Browsing] to add the
movie to the [My Videos] and return to the
[Movies] menu.
Operation
B
Starts playing back the movie.
2. The [Title Details] screen shows the
information of the video such as rating, run
time, etc.
X
Pause a movie while it’s playing.
To resume playing a paused
movie, press B again.
3. Use U/u/I/i to select [Buy] or [Rent] and
press ENTER ( ).
x
Stops the movie and displays
previous screen.
ENTER
Displays the video quality
indicator and progress bar on
the screen.
m/M
Scans forward or backward
through the movie. To scan
faster, press the button again. To
return to the normal playback,
press B.
• If you select [Add to Wish List] from [Title Details]
menu, the video will be stored in the [Wish List].
You can buy, rent or remove this video from the
[Wish List] menu.
4
Operation
Button
NOTE
71
• For [Title Details] menu of [TV Shows], use U/u/
I/i to select an episode, and then select [Buy]
to purchase each episode.
4. Select [Place order] to confirm your
purchase. Any gift code balance you have
previously redeemed will be applied
automatically. If you want to redeem a new
gift code, select [Redeem Gift Code] and
press ENTER ( ) to enter the gift code on
the keyboard menu.
BD592-N-AUSALLK-ENG.indd 71
2010.1.7 12:14:31 PM
72
Operation
NOTE
Playing YouTube™ videos
• Rental videos are available to watch for a 24
hour period (in most cases), starting from the
first time they are played.
• If you have a CinemaNow gift code, you can
redeem it by selecting the [Redeem Gift Code]
button at checkout.
• While most videos are available for rental and
purchase, some are available for purchase only
due to content owner restrictions. If you want to
view content that is only available to rent, you
may do so by going to the settings menu, and
checking the “Show only titles
available for RENT in browse results”.
• Please note that there may be a difference
between the content offered to buy and watch
on the CinemaNow service on the LG player,
and that on www.cinemanow.com. This is due
to content owner restrictions.
4
Operation
• The playback of CinemaNow videos may be
paused, stopped or buffering occurring often
depending on your broadband speed.
We recommend a minimum connection speed
of 1.5 Mbps. For the best playback condition,
a connection speed of 4.0 Mbps is required.
Sometimes your broadband speed varies based
on your ISP’s network conditions. Contact your
ISP if you have problems maintaining a fast
connection that is reliable, or if you want to
increase your connection speed. Many ISPs offer
a variety of broadband speed options.
BD592-N-AUSALLK-ENG.indd 72
You can browse, search and watch YouTube™
videos over the internet to your TV via your LG
Blu-ray disc player.
Watch YouTube™ videos on your TV
1. On the player, select the [YouTube™] option
in the [NetCast] menu using I/i, and press
ENTER ( ).
2. Press U to select the option menu bar.
3. Use I/i to select an option and press
ENTER ( ) to search videos.
4. Use I/i to select a video and press ENTER
( ) or N (play) to play the video.
Button
Operation
B or ENTER Starts playback the video with
content detail.
INFO/
DISPLAY
Toggle between playback in
full screen and playback screen
with content detail.
X
To pause a video while it is
playing. To resume playing a
paused video, press B again.
x
Stops the video and displays
related videos list.
./>
Skip the playback forward or
backward .
2010.1.7 12:14:31 PM
Operation
73
About the YouTube™ menu
There are various options on the
YouTube™ menu. Use U/u/I/i to select
an option and press ENTER ( ) to select the
options as described below.
Featured – The featured videos list will be
displayed.
Recent Videos – The most recently updated
videos list will be displayed.
Most Viewed – The most viewed videos list
will be displayed. The period option appears
at the bottom of the screen.
Top Rated – The best rated videos list from
YouTube™ server will be displayed. The period
option appears at the bottom of the screen.
Search – The virtual keyboard will be
displayed. See “Searching videos” on page 74
for more detail.
Favorites – This option will be appeared only
when the unit is in sign-in status. Displays the
videos list that is arranged in the YouTube™
server with your account. Some videos may
not appear on the [Favorites] list, even if the
videos are arranged in the server.
Sign in (Sign Out) – Displays the virtual
keyboard to sign in or returns to the signout status. See “Sign in with your YouTube™
account” on page 75 for more details.
Local site – Choose which country’s videos
you would like to view. The countries listed on
the [Local Site] menu may different with those
listed on the YouTube™ web site.
BD592-N-AUSALLK-ENG.indd 73
• The YouTube™ menu can display 5 videos in the
videos list. Press green (G) or yellow (Y) buttons
to display previous/next 5 videos.
• If you select the [Most Viewed] or [Top Rated]
option in the YouTube™ menu, the period
options appear at the bottom of the screen. Use
U/u/I/i to select a period option and press
ENTER ( ) to display the videos list within the
selected period.
• The videos list searched from the player may
differ with the list searched from a web browser
on PC.
• The playback of YouTube videos may be paused,
stopped or buffering occurring often depending
on your broadband speed. We recommend
a minimum connection speed of 1.5 Mbps.
For the best playback condition, a connection
speed of 4.0 Mbps is required. Sometimes your
broadband speed varies based on your ISP’
s network conditions. Contact your ISP if you
have problems maintaining a fast connection
that is reliable, or if you want to increase your
connection speed. Many ISPs offer a variety of
broadband speed options.
4
Operation
History – The videos list that you previously
played on this unit will be displayed.
Maximum of 25 videos can be stored.
NOTE
Using the virtual keyboard
On the virtual keyboard, there are two input
mode for the entering a character. Press the
yellow (Y) colored button to toggle display
between keyboard mode and keypad mode.
Keyboard Mode
UseU/u/I/i to select a letter on the screen,
and press ENTER to confirm your selection.
2010.1.7 12:14:31 PM
74
Operation
[Cancel] – Return to the previous screen.
REPEAT
[Space] – Inserts a space at the cursor
position.
Inserts a space at the cursor
position.
m/M
Change the character set of
the remote control (#+-=&,
123, ABC or abc)
[Backspace] – Deletes the previous character
at the cursor position.
[ABC / abc / #+-=&] – Changes the virtual
keyboard settings to capital letters, small
letters or symbols.
Press CLEAR to clear all entered characters.
To enter a letter with an accent mark:
1. Select a letter using U/u/I/i on the virtual
key board.
2. Press INFO/DISPLAY ( ) to display the
extended character set.
4
3. Use I/i to select a character then press
ENTER.
Operation
Available languages to enter on the keyboard
mode are as follows: English, Spanish, Italian,
French, German, Dutch, Portuguese, Swedish,
Polish and Czech.
NOTE
The keypad mode is available only in the
[YouTube™] and [Picasa™ Web Albums] features.
Searching videos
You can search for videos by entering search
words of up to 128 characters.
1. Use I/i to select [Search] option from the
menu and press ENTER ( ) to display the
virtual keyboard.
Refer to “Using the virtual keyboard” on
page 73-74 for using virtual keyboard.
Keypad Mode
This mode allows you to enter letters by
pressing the buttons on the remote control.
Press the buttons with the required letter once,
twice, three or four times until the letter is
displayed.
Button
Operation
CLEAR
Deletes the previous character
at the cursor position.
BD592-N-AUSALLK-ENG.indd 74
When you entering a character, maximum
of 5 suggestion words will be displayed.
2. When you finish entering the search words,
select [OK] and press ENTER ( ) to display
the related video list.
2010.1.7 12:14:32 PM
Operation
Sign in with your YouTube™ account
To watch videos from your [Favorites] video list
on the YouTube™ server with your account, you
need to sign in with your YouTube™ account.
1. Use I/i to select [Sign In] option from the
menu and press ENTER ( ) to display the
virtual keyboard.
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the virtual keyboard.
Refer to “Using the virtual keyboard” on
page 73-74 for using virtual keyboard.
3. When you finish entering the user name
and the password, select [OK] and press
ENTER ( ) to sign in.
4. If you want to sign out, select the [Sign Out]
from the YouTube™ menu and press ENTER
( ).
Select a stored user name on the list and press
ENTER ( ) to display the keyboard menu with
the selected user name is entered. You will
then only need to enter the password to sign
in.
Enjoying Pandora internet
radio
You can instantly listen to personalized radio
stations, streamed over the internet, from
Pandora via your LG BD player.
Activating Pandora radio
You must activate your player before using the
player to listen to internet radio streamed over
the internet from Pandora.
1. On the player, select the [Pandora] option
in the [NetCast] menu using I/i, and press
ENTER ( ).
2. If you don’t have a Pandora account, you
will need to create one. Select [No] by
pressingI/i, and then press ENTER ( ).
4
Operation
This unit can automatically store up to 5 user
names which were previously signed-in. The
user name list appears when you select the
[Sign In] option.
75
If you already have an account, select [Yes]
and press ENTER ( ). Enter the E-mail and
password to sign in your account.
3. On your TV screen you will see an activation
code. Note the activation code and web
site address.
Select the [X] symbol and press ENTER ( ) to
delete the stored user name.
BD592-N-AUSALLK-ENG.indd 75
2010.1.7 12:14:32 PM
76
Operation
4. On your computer, visit web site address
you have noted at step 3.
5. Complete the Pandora registration process
with the activation code you have noted at
step 3.
6. On your player, press ENTER ( ) to
complete the activation.
3. Use U/u/I/i to enter a username , and
press ENTER ( ) while [OK] option is
selected.
4. Use U/u/I/i to enter a password , and
press ENTER ( ) while [OK] option is
selected.
For questions regarding the Pandora
service please visit:
http://www.pandora.com/help
or e-mail:
[email protected]
Your station list appears on the screen.
4
Adding multiple Pandora user
accounts
Operation
You can add more than one Pandora user
account on this device. Everyone in your
household can create their own Pandora
accounts so they can create and listen to their
own stations.
1. On the player, select the [Pandora] option
in the [NetCast] menu using I/i, and press
ENTER ( ).
2. Use U/u to select [New username], and
press ENTER ( ) to display the virtual
keyboard.
Select a stored user name on the list and
press ENTER ( ) to display your station list.
Select the [X] symbol and press ENTER ( )
to delete the stored user name.
BD592-N-AUSALLK-ENG.indd 76
5. If you want to sign out the current user
name, press yellow (Y) colored button.
Creating a Pandora station
You can create stations by entering your
favorite artist or song. After entering, Pandora
offers you a radio station featuring that music
and more like it.
1. On the [Station List] menu press red (R)
colored button.
Virtual keyboard screen appears on the
screen.
2. Enter a name of your favorite artist or song,
and press ENTER ( ) while [OK] is selected.
3. Use I/i to select an option between
[Artist] or [Song], and press ENTER ( ) to
display the [Search Result].
2010.1.7 12:14:32 PM
Operation
77
Using the station screen
While listening to musics from Pandora via
your player, you can set various options to the
currently playing song.
4. Use U/u to select a station in the [Search
Result], and press ENTER ( ) to start the
music playback.
Tells Pandora that you like the
currently playing song. Pandora
will then play you more songs
that are similar.
Operation
X or x
Pause a music while it is
playing. To resume playing a
paused music, press B (PLAY).
Excludes the selected song
from the all stations for a
month.
>
Skips to the next song.
(This is limited to at most 6
times. )
Bookmarks the currently
playing song. You can view all
of your bookmarks by logging
into Pandora on the web at
www.pandora.com and clicking
on the “Your Profile” link.
5. If you want to delete the station from the
list, select a station using U/u and press
green (G) colored button to delete the
station.
4
Operation
Button
Tells Pandora that you do not
like the currently playing song.
Pandora will immediately skip
to the next song and won’t play
you the song, or others like it,
again.
NOTE
• Pandora will pause a playback after eight
hours without any input. At this point, Pop-up
message appears and you have to press ENTER
( ) to resume the music.
• You may not get the song information according
to the network conditions.
BD592-N-AUSALLK-ENG.indd 77
2010.1.7 12:14:33 PM
78
Operation
Viewing Picasa™ Web Albums
Options while viewing a photo
You can use various options during viewing a
photo in full screen.
Enjoy photo albums from friends and family on
the Picasa™ on-line service.
1. While viewing a photo in full screen, press
INFO/DISPLAY ( ) to display the option
menu.
2. Select an option using U/u.
View Picasa™ Web Albums on your
TV
1. On the player, select the [Picasa™ Web
Albums] option in the [NetCast] menu
using I/i, and press ENTER ( ).
Featured photos are appeared on the
screen.
2. Use U/u/I/i to select a photo and press
ENTER ( ) to view the photo in full screen.
4
a
b
c
d
e
f
g
Operation
Button
Operation
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
B
Starts a slide show.
INFO/
DISPLAY
Displays the photo option
menu.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
X
Pauses a slide show. To resume
slide show, press B again.
d Rotate – Press ENTER ( ) to rotate the
photo clockwise.
x
Stops the slide show and
return to the Picasa™ menu.
e Zoom – Press ENTER ( ) to display the
[Zoom] menu.
I/i
Moves to the next or previous
photo.
f Effect – Use I/i to select a transition
effect between photos in a slide show.
c Add to Friends List– Add the current
photo owner to my friend list.
g Speed – Use I/i to select a delaying
speed between photos in a slide show.
3. Press RETURN (O) to exit the option menu.
BD592-N-AUSALLK-ENG.indd 78
2010.1.7 12:14:33 PM
Operation
About the Picasa™ menu
Adding friends
There are various options on the Picasa™
menu. Use U/u/I/i to select an menu option
and press ENTER ( ) to select the options as
described below.
If you add your friends on the [NetCast Friends]
menu, you can see the photos of your friend’s
public photos directly.
Home – The featured photo list will be
displayed.
NetCast Friends – List of your friends will be
displayed.
My Photos – Displays the photos organized
in my Picasa™ Web Album. This option is
available only when the unit is in sign-in
status.
Favorites – Displays up to 50 favorite web
albums that are arranged in the Picasa™
web server with your account. This option
is available only when the unit is in sign-in
status.
Sign in (Sign Out) – Displays the virtual
keyboard to sign in or returns to the sign-out
status (page 80)
1. Select the [NetCast Friends] on the Picasa™
menu using U/u/I/i, and press ENTER
( ).
2. Press ENTER ( ) to display the virtual
keyboard.
3. Enter a name using the virtual keyboard.
Refer to “Using the virtual keyboard” on
page 73-74 for using virtual keyboard.
4. Select [OK] using U/u/I/i, and press
ENTER ( ) to display the web album of
your friend.
4
Operation
Search – Enter a search word to find related
photos. The virtual keyboard will be displayed
(page 80).
79
NOTE
• If you want to delete your friend from the list,
press green (G) colored button while the web
album is selected.
• If you want to add more friends, press red (R)
colored button on the list.
• You can add more web albums of your friends
up to 50.
NOTE
Photos displayed in [My Photos] and [Favorites]
may differ with the photos from a web browser on
PC.
BD592-N-AUSALLK-ENG.indd 79
2010.1.7 12:14:34 PM
80
Operation
Searching photos
You can enter a search word to find related
photos.
1. Select the [Search] on the Picasa™ menu
using U/u/I/i, and press ENTER ( ).
2. Enter a search word using the virtual
keyboard.
Refer to “Using the virtual keyboard” on
page 73-74 for using virtual keyboard.
3. Select [OK] using U/u/I/i, and press
ENTER ( ) to display the search result.
NOTE
The search result from the player may differ with
the result searched from a web browser on PC.
3. Enter the password using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
Your web album is appeared on the screen.
4. If you want to sign out, select the [Sign Out]
from the Picasa™ menu and press ENTER
( ).
This unit can automatically store up to 5 user
names which were previously signed-in. The
user name list appears when you select the
[Sign In] option.
Select a stored user name on the list and press
ENTER ( ) to display the virtual keyboard with
the selected user name is entered. You will
then only need to enter the password to sign
in.
4
Operation
Signing in with your account
To display photos in your web album on the
screen, you need to sign in with your Picasa™
account.
1. Select the [Sign In] on the Picasa™ menu
using U/u/I/i, and press ENTER ( ).
Select the [X] symbol and press ENTER ( ) to
delete the stored user name.
2. Enter your user name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
Refer to “Using the virtual keyboard” on
page 73-74 for using virtual keyboard.
BD592-N-AUSALLK-ENG.indd 80
2010.1.7 12:14:34 PM
Operation
Using the AccuWeather
81
5. Select a city using U/u/I/i, and press
ENTER ( ).
6. Use U/u/I/i to select [Home] and press
ENTER ( ) to display weather information
of the selected city.
See on-line local and global weather forcasts
from AccuWeather.com.
Viewing weather information
1. On the player, select the [AccuWeather]
option in the [NetCast] menu using I/i,
and press ENTER ( ).
The city selection menu appears on the
screen.
Press red (R) colored button to toggle
display between Fahrenheit or Celsius
thermometer.
7. Use I/i to select previous or next city, and
press ENTER ( ) to display the weather
information.
NOTE
2. Press ENTER while [Add City to Favorite City
List] is selected.
3. Select a region using U/u, and press ENTER
( ).
4
Operation
This step works only when you add more
than 1 cities to the [Favorite city List].
• The weather information is not always correct.
• The weather information may be displayed in
English, if your own language is not available on
the AccuWeather service.
4. Select a, country using U/u/I/i, and press
ENTER ( ).
BD592-N-AUSALLK-ENG.indd 81
2010.1.7 12:14:35 PM
82
Operation
Adding more cities
1. Use I/i to select [Favorite City List] on the
AccuWeather menu, and press ENTER ( ).
2. Press ENTER ( ) while [Add City to Favorite
City List] is selected.
3. Select a region, country and city using
U/u/I/i and ENTER ( ).
4
4. Repeats step 2-3 to add up to 5 cities.
Operation
Select the [X] symbol and press ENTER ( )
to delete the stored favorite city.
5. Use U/u to select a city from the [Favorite
City List], and press ENTER ( ) to display
the weather information.
BD592-N-AUSALLK-ENG.indd 82
2010.1.7 12:14:35 PM
Maintenance
83
5
Maintenance
Handling the Unit
Handling Discs
When shipping the unit
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints
do not get on the surface. Never stick paper or
tape on the disc.
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Storing Discs
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
•
Do not use volatile liquids such as
insecticide spray near the unit.
•
Wiping with strong pressure may damage
the surface.
Cleaning Discs
•
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion.
Before playing, clean the disc with a clean
cloth. Wipe the disc from the center to out.
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
5
Maintenance
Notes on Discs
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service center.
BD592-N-AUSALLK-ENG.indd 83
2010.1.7 12:14:36 PM
84
Maintenance
About the internal hard disk drive
•
The internal hard disk drive (HDD) is a fragile
piece of equipment. Please use the player
following the guidelines below to protect
against possible HDD failure.
•
Do not move the player while it is on.
•
Install and use a player on a stable, leveled
surface.
•
Do not use the player in excessively hot
or humid places, or in places that may be
subject to sudden changes in temperature.
Sudden changes in temperature can cause
condensation to form inside the player. This
can be a cause of HDD failure.
•
While the player is powered on, do not
unplug from the wall socket or switch the
electricity off from the breaker switch.
•
Do not move the player immediately after
switching it off. If you need to move the
player, please follow the steps below:
If the HDD fails, playback of content will
not be possible. In this case, contact the LG
service center by following methods.
Web: http://us.lgservice.com
Phone: 1-800-243-0000
•
The manufacturer disclaims responsibility
for loss of data contained in internal HDD.
1. After the message “OFF” is shown in the
display, wait at least two minutes.
2. Unplug from the wall socket.
5
Maintenance
3. Move the player.
•
If there’s a power failure while the player is
on, there is a chance that some data on the
HDD will be lost.
•
The HDD is very delicate. If used improperly
or in an unsuitable environment, it is
possible that the HDD will fail after a few
years of use. Signs of problems include
playback unexpectedly freezing and
noticeable block noise (mosaic) in the
picture. However, sometimes there will be
no warning signs of HDD failure.
BD592-N-AUSALLK-ENG.indd 84
2010.1.7 12:14:36 PM
Troubleshooting
85
6
Troubleshooting
General
Symtom
Cause & Solution
The Power does not
turned on.
•
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
•
Insert a playable disc. (Check the disc type, color system, and
regional code.)
•
Place the disc with the playback side down.
•
Place the disc on the disc tray correctly inside the guide.
•
Clean the disc.
•
Cancel the Rating function or change the rating level.
The angle cannot be
changed.
•
Multi-angles are not recorded on the BD/DVD Video being
played.
Cannot play movie, photo
or audio files.
•
The files are not recorded in a format that the unit can play.
•
The unit does not support the codec of the video file.
The remote control does
not work properly.
•
The remote control is not pointed at the remote sensor of
the unit.
The unit is not operating
normally.
BD592-N-AUSALLK-ENG.indd 85
The remote control is too far from the unit.
•
There is an obstacle in the path of the remote control and
the unit.
•
The batteries in the remote control are exhausted.
You can reset the unit as follows.
1. Press and hold the 1 (POWER) button for at least five
seconds. This will force the unit to power off then turn the
unit back on.
2. Unplug the power cord, wait at least five seconds, and then
plug it in again.
Troubleshooting
The unit is plugged in, but
the power will not turn on
or off.
•
6
2010.1.7 12:14:36 PM
86
Troubleshooting
Picture
Symtom
Cause & Solution
There is no picture.
•
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
•
Connect the video connection securely.
•
Check the [HDMI Color Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
•
Your TV may not suppot the resolution you have set on the
player. Change the resolution that your TV accepts.
•
The player’s HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
•
You are playing a disc recorded in a color system that is
different from your TV.
•
Set the resolution which your TV accepts.
Picture noise appears
Sound
Symtom
Cause & Solution
There is no sound or the
sound is distorted.
•
Connect the audio connection securely.
•
The input source setting on the amplifier or the connection
to the amplifier is incorrect.
•
The unit is in scan, slow motion, or pause mode.
•
The sound volume is low.
•
Check that the connected amplifier is compatible with audio
format output from the player.
•
The player’s HDMI OUT jack is connected to a DVI device. The
DVI jack does not accept audio signal.
•
Check the device connected to player’s HDMI OUT jack is
compatible with audio format output from the player.
6
Troubleshooting
BD592-N-AUSALLK-ENG.indd 86
2010.1.7 12:14:37 PM
Troubleshooting
87
Network
Symtom
Cause & Solution
BD-LIVE feature does not
work.
•
The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
•
Ensure that the unit is correctly connected to the local area
network and can access the internet (see pages 20-25).
•
Your broadband speed may not fast enough to use the BDLIVE features. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
•
The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
Streaming video services
(such as YouTube™, etc.)
are often stopped or “
buffer” during playback.
•
Your broadband service speed may not be fast enough to
stream video services. Contact your Internet Service Provider
(ISP) and increase the broadband speed is recommended.
Shared folder or files from
your PC or a media server
are not displayed on the
[Home Link] menu.
•
The firewall or anti-virus software on your media server is
running. Turn off the firewall or anti-virus software running
on your PC or media server.
•
The player is not connected to the local area network that
your PC or the media server are connected.
Cannot connect the player •
to the access point or
wireless LAN router.
The wireless communication may be interrupted from
household devices that are using radio frequencies. Move
the player away from them.
Access point is not
displayed on the “Access
point name” list.
The access point or wireless LAN router may not broadcast
its SSID. Set your access point to broadcast its SSID through
your computer.
•
You can update the Player using the latest software to enhance the products operation and/or
add new features. To obtain the latest software for this player (if updates have been made),
please visit http://us.lgservice.com or contact LG Electronics customer care center.
BD592-N-AUSALLK-ENG.indd 87
Troubleshooting
Customer Support
6
2010.1.7 12:14:38 PM
88
Appendix
7
Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons
below.
Setting up the remote to
control your TV
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
By pressing
You can
Sony
8, 9
1 (TV POWER)
Turn the TV on or off.
Hitachi
4
AV/INPUT
Switch the TV’s input
source between the TV
and other input sources.
7
PR/CH U/u
Appendix
Scan up or down
through memorized
channels.
VOL +/–
Adjust the volume of
the TV
2. Release the 1 (TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
BD592-N-AUSALLK-ENG.indd 88
2010.1.7 12:14:39 PM
Appendix
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to
a broadband home network. If there is new
software available and the unit is connected
to a broadband home network, the player will
inform you about the update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2. Use I/i to select a desired option and then
press ENTER ( ).
89
Option 2:
If the software update is available from the
update server, the “Update” icon appears at
the bottom of the Home menu. Press blue (B)
colored button to start the update procedure.
Software Update
You can update the player using the latest
software to enhance the products operation
and/or add new features. You can update the
software by connecting the unit directly to the
software update server.
CAUTION
• Before updating the software in your player,
remove any disc and USB Device from the player.
• Before updating the software in your player, turn
the player off and then turn it back on.
• During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
• If you cancel the update, turn off the power and
turn it on for stable performance.
• This unit cannot be updated to previous
software version.
[OK]
Starts the software update.
2. Select [Software] option in the [Setup]
menu then press ENTER ( ).
3. Select [Update] option, and press ENTER
( ).
[Hide]
Exits the update menu and it does not
appear until next software is uploaded in
the update server.
7
Appendix
[Cancel]
Exits the update menu and displays it next
booting.
1. Check the network connection and settings
(page 20-25).
The player will check for the newest update.
BD592-N-AUSALLK-ENG.indd 89
2010.1.7 12:14:40 PM
90
Appendix
NOTE
• Pressing ENTER while checking for the update
will end the process.
• If there is no update available, the Message, “No
update is found.” appears. Press ENTER to return
to the [Home Menu].
4. If newer version exists, the message “A
new update was found. Do you want to
download it?” appears.
NOTE
If the software includes the driver update, disc tray
may open during the process.
9. When update is completed, the message, “
Update is complete.” will appear, and then
power will turn off automatically after 5
seconds.
10. Turn the power back on. The system now
operates with the new version.
NOTE
5. Select [OK] to download the update.
(Selecting [Cancel] will end the update.)
The Software Update function may not work
properly depending on your internet environment.
In this case, you can obtain the latest software from
the authorized LG Electronics Service Center then
update your player. Refer to “Customer Support” on
page 87.
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your
home network condition)
7. When downloading is completed, the
message, “Download is complete. Do you
want to update?” appears.
7
8. Select [OK] to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To
update software the next time, the software
update procedure has to be started from
the beginning again.)
Appendix
CAUTION
Do not turn off the power during the software
update.
BD592-N-AUSALLK-ENG.indd 90
2010.1.7 12:14:40 PM
Appendix
91
Area Code List
Choose an area code from this list.
Area
Code Area
Code Area
Code Area
Code
Afghanistan
AF Fiji
FJ Monaco
MC Singapore
SG
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
SK
Australia
AU France
FR Morocco
MA Slovenia
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
Bolivia
BO Greenland
GR Netherlands
GL Antilles
LK
Brazil
BR Hong Kong
Spain
AN Sri Lanka
NZ Sweden
Cambodia
KH Hungary
Canada
CA India
Chile
CL Indonesia
China
CN Israel
Colombia
CO Italy
Congo
CG Jamaica
Costa Rica
CR Japan
Croatia
HR Kenya
Czech Republic
CZ Kuwait
Denmark
DK Libya
Ecuador
EC Luxembourg
Egypt
EG Malaysia
El Salvador
SV Maldives
Ethiopia
ET Mexico
HK New Zealand
HU Nigeria
IN Norway
ID Oman
IL Pakistan
IT Panama
JM Paraguay
JP Philippines
KE Poland
KW Portugal
LY Romania
LU Russian
Federation
MY
Saudi Arabia
MV
Senegal
MX
NG Switzerland
NO Taiwan
SI
ES
SE
CH
TW
OM Thailand
PK Turkey
TH
PA Uganda
PY Ukraine
UG
PH United States
PL Uruguay
US
TR
UA
UY
PT Uzbekistan
RO Vietnam
UZ
Zimbabwe
ZW
RU
VN
SA
SN
7
Appendix
BD592-N-AUSALLK-ENG.indd 91
2010.1.7 12:14:40 PM
92
Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Code Language
Afar
7
Code Language
6565
French
7082
Lithuanian
Afrikaans
6570
Frisian
7089
Albanian
8381
Galician
7176
Ameharic
6577
Georgian
7565
Arabic
6582
German
6869
Armenian
7289
Greek
Assamese
6583
Aymara
6588
Azerbaijani
6590
Bashkir
6665
Basque
6985
Code Language
Code
Appendix
7684
Sindhi
8368
Macedonian
7775
Singhalese
8373
Malagasy
7771
Slovak
8375
Malay
7783
Slovenian
8376
Malayalam
7776
Spanish
6983
6976
Maori
7773
Sudanese
8385
Greenlandic
7576
Marathi
7782
Swahili
8387
Guarani
7178
Moldavian
7779
Swedish
8386
Gujarati
7185
Mongolian
7778
Tagalog
8476
Hausa
7265
Nauru
7865
Language
Code
Hebrew
7387
Nepali
7869
Tajik
8471
Bengali; Bangla 6678
Hindi
7273
Norwegian
7879
Tamil
8465
Bhutani
6890
Hungarian
7285
Oriya
7982
Telugu
8469
Bihari
6672
Icelandic
7383
Panjabi
8065
Thai
8472
Breton
6682
Indonesian
7378
Pashto, Pushto 8083
Tonga
8479
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkish
8482
Burmese
7789
Irish
7165
Polish
8076
Turkmen
8475
Byelorussian
6669
Italian
7384
Portuguese
8084
Twi
8487
Chinese
9072
Japanese
7465
Quechua
8185
Ukrainian
8575
Croatian
7282
Kannada
7578
Urdu
8582
Czech
6783
Kashmiri
7583
Rhaeto-Romance
8277
Uzbek
8590
Danish
6865
Kazakh
7575
Rumanian
8279
Vietnamese
8673
Dutch
7876
Kirghiz
7589
Russian
8285
Volapük
8679
8377
English
6978
Korean
7579
Samoan
Welsh
6789
Esperanto
6979
Kurdish
7585
Sanskrit
8365
Wolof
8779
Estonian
6984
Laothian
7679
Scots Gaelic
7168
Xhosa
8872
7665
Serbian
8382
Yiddish
7473
Faroese
7079
Latin
Fiji
7074
Latvian, Lettish 7686
Serbo-Croatian 8372
Yoruba
8979
Lingala
Shona
Zulu
9085
Finnish
BD592-N-AUSALLK-ENG.indd 92
7073
7678
8378
2010.1.7 12:14:41 PM
Appendix
93
Trademarks and
Licenses
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks of
the Digital Living Network Alliance.
“Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc
Association.
“BONUSVIEW” is trademark of Blu-ray Disc
Association.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
This product is licensed under the AVC patent
portfolio license and VC-1 patent portfolio license
for the personal and non-commercial use of a
consumer to (i) encode video in compliance with
the AVC Standard and VC-1 Standard (“AVC/VC-1
Video”) and/or (ii) decode AVC/VC-1 Video that was
encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from
a video provider licensed to provide AVC/VC-1 Video.
No license is granted or shall be implied for any other
use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
DivX is a registered trademark of DivX, Inc., and is
used under license.
YouTube™ is a trademark of Google Inc.
Picasa™ Web Albums is a trademark of Google Inc.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
BD592-N-AUSALLK-ENG.indd 93
7
Appendix
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 &
other U.S. and worldwide patents issued & pending. DTS
is a registered trademark and the DTS logos, Symbol,
DTS-HD and DTS-HD Master Audio are trademarks of
DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
2010.1.7 12:14:41 PM
94
Appendix
The Wi-Fi CERTIFIED Logo is a certification mark of
the Wi-Fi Alliance.
“x.v.Color” is a trademark of Sony Corporation.
On the LG products, an innovative power
consumption system in stand-by mode is built.
Therefore, the small amounts of electricity
areconsumed even though the power plug is
inserted.
Gracenote®, Gracenote logo and logotype, and the
“Powered by Gracenote” logo are either registered
trademarks or trademarks of Gracenote, Inc. in the
United States and/or other countries.
Music recognition technology and related data are
provided by Gracenote®.
Portions of the content is copyright © Gracenote or
its providers.
Gracenote® End User License Agreement
7
Appendix
This application or device contains software from
Gracenote, Inc. of Emeryville, California
“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application to
perform disc and/or file identification and obtain
music-related information, including name, artist,
track, and title information (“Gracenote Data”) from
online servers or embedded databases (collectively,
“Gracenote Servers”) and to perform other functions.
You may use Gracenote Data only by means of the
intended End-User functions of this application or
device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You
agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any
third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY
PERMITTED HEREIN.
BD592-N-AUSALLK-ENG.indd 94
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your license terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under no
circumstances will Gracenote become liable for any
payment to you for any information that you provide.
You agree that Gracenote, Inc. may enforce its rights
under this Agreement against you directly in its own
name.
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose of
a randomly assigned numeric identifier is to allow
the Gracenote service to count queries without
knowing anything about who you are. For more
information, see the web page for the Gracenote
Privacy Policy for the Gracenote service.
The Gracenote Software and each item of Gracenote
Data are licensed to you “AS IS.” Gracenote makes
no representations or warranties, express or implied,
regarding the accuracy of any Gracenote Data from
in the Gracenote Servers. Gracenote reserves the
right to delete data from the Gracenote Servers or to
change data categories for any cause that Gracenote
deems sufficient. No warranty is made that the
Gracenote Software or Gracenote Servers are errorfree or that functioning of Gracenote Software or
Gracenote Servers will be uninterrupted. Gracenote
is not obligated to provide you with new enhanced
or additional data types or categories that Gracenote
may provide in the future and is free to discontinue
its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE OBTAINED BY
YOUR USE OF THE GRACENOTE SOFTWARE OR ANY
GRACENOTE SERVER. IN NO CASE WILL GRACENOTE
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR LOST
REVENUES.
© Gracenote, Inc. 2009
2010.1.7 12:14:42 PM
Appendix
95
Audio Output
Specifications
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Digital Output (DIGITAL AUDIO OUT) *4
Analog
2CH Output
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS Re-encode*3 *5
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
Jack/Setting
Source
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
Primary Pass-Thru
Dolby Digital
Dolby Digital
Dolby Digital
DTS
DTS
PCM 2ch
PCM 2ch
PCM 2ch
HDMI OUT
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM Multi-Ch *3
PCM 5.1ch
PCM 7.1ch
PCM 7.1ch
PCM 5.1ch
PCM 7.1ch
PCM 2ch
PCM 5.1ch
PCM 7.1ch
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[HDMI] option is set to [Primary Pass-Thru].
Primary Pass-Thru *1 *2 *3
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
*3 The [PCM Multi-CH]/[Primary Pass-Thru]
setting of the [HDMI] option and [DTS reencode] setting of the [Digital Output]
option cannot be set together. If you set
them together, the [HDMI] or [Digital
Output] option is set to [PCM Stereo]
automatically.
*4 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited
to 96 kHz.
7
Appendix
*1 The secondary and interactive audio may
not be included in the output bitstream if
[Digital Output] or [HDMI] option is set to
[Primary Pass-Thru]. (Except LPCM Codec :
the output always include interactive and
secondary audio.)
DTS Re-encode*3 *5
DTS
DTS
DTS
DTS
DTS
DTS
DTS
DTS
*5 If the [HDMI] or [Digital Output] option is
set to [DTS re-encode], the audio output is
limited to 48 kHz and 5.1Ch. If the [HDMI]
or [Digital Output] option is set to [DTS
re-encode], the DTS Re-encode audio
BD592-N-AUSALLK-ENG.indd 95
2010.1.7 12:14:42 PM
96
Appendix
is outputted for BD-ROM discs, and the
original audio is outputted for the other
discs (like [Primary Pass-Thru]).
•
If [HDMI] option is set to [PCM Multi-CH]
and [Digital Output] option is set to [Primary
Pass-Thru] while playback Dolby Digital Plus
or TrueHD audio, DIGITAL AUDIO OUT is
limited to “PCM 2ch”.
•
If the HDMI connection is version 1.3
and Dolby Digital Plus/Dolby TrueHD is
outputted from HDMI OUT jack, DIGITAL
AUDIO OUT jack is limited to “PCM 2ch”
(When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).
•
The audio is outputted as PCM 48 kHz/16
bit for MP3/WMA file and PCM 44.1kHz/16
bit for Audio CD while playback.
•
The Dolby TrueHD audio recorded on some
Blu-ray discs consists of Dolby Digital and
TrueHD audio. Dolby Digital audio is output
through DIGITAL AUDIO OUT jacks and “DD
” displays on the screen if TrueHD audio is
not output (for example, when [HDMI] is set
to [PCM Stereo] and [Digital Output] is set
to [Primary Pass-Thru]).
•
You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using
[Digital Output], [HDMI] and [Sampling
Freq.] options on the [Setup] menu (see
page 29-30).
•
With digital audio connection (Digital
Output or HDMI), Disc Menu button sounds
of BD-ROM may not be heard if the [Digital
Output] or [HDMI] option is set to [Primary
Pass-Thru].
•
If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
•
Multi-channel Digital Surround Sound via
digital connection can only be obtained
if your receiver is equipped with a Digital
Multi-channel decoder.
7
Appendix
BD592-N-AUSALLK-ENG.indd 96
2010.1.7 12:14:42 PM
Appendix
97
Video Output
Resolution
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
480i
480p
480i
480p
480p
480p
720p
720p
720p
1080i
1080i
1080i
1080p/24 Hz
1080p / 24 Hz
480i
1080i
1080p / 60 Hz
1080p / 60 Hz
480i
1080i
When the copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
480i
480p
480p
480p
720p
720p
480i
1080i
1080i
480i
480p
1080p/24 Hz
1080p / 24 Hz
480i
480p
1080p / 60 Hz
1080p / 60 Hz
480i
480p
HDMI OUT connection
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
•
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
480p
•
480p
The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
7
COMPONENT VIDEO OUT
Connection
BD, DVD, Netflix or CinemaNow video stream
could prevent up-scaling on analog output.
Appendix
•
480i
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 480i resolution.
BD592-N-AUSALLK-ENG.indd 97
2010.1.7 12:14:42 PM
98
Appendix
System
Specifications
Laser:
Semiconductor laser,
General
wavelength:
405 nm / 650 nm
Power requirements:
AC 120 V ~, 60 Hz
Signal system:
Standard NTSC color TV system
Power consumption:
29 W
Frequency response:
20 Hz to 20 kHz
(48 kHz, 96 kHz, 192 kHz sampling)
Dimensions (W x H x D):
Approx. 430 x 49 x 295 mm
(16.9 x 1.9 x 11.6 inches) without foot
Signal-to-noise ratio:
More than 100 dB
(ANALOG OUT connectors only)
Net Weight (Approx.):
3.2 kg (7.0 lbs)
Harmonic distortion:
Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
Less than 0.008%
Dynamic range:
Operating humidity:
More than 95 dB
5 % to 90 %
Hard disk drive:
250 GB (Some of the stated hard disk drive
capacity is used for formatting and not
available for storage.)
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, sync negative,
RCA jack x 1,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
7
Wireless LAN (internal antenna):
Integrated IEEE 802.11n (2.4 GHz band only)
wireless networking access, compatible with
802.11b/g Wi-Fi networks.
Appendix
HDMI OUT (video/audio):
19 pin (HDMI standard, Type A, Version 1.3)
Bus Power Supply (USB):
DC 5 V
ANALOG AUDIO OUT:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x
1
•
500 mA
Design and specifications are subject to
change without notice.
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL OUT (OPTICAL):
3 V (p-p), Optical jack x 1
BD592-N-AUSALLK-ENG.indd 98
2010.1.7 12:14:43 PM
Appendix
Important Information
Relating to Network
Services
PLEASE READ CAREFULLY. USE OF THE NETWORK
SERVICES IS SUBJECT TO THE FOLLOWING TERMS
AND CONDITIONS.
Use of the Network Services requires an Internet
connection which is sold separately and for which
you are solely responsible. The Network Services may
be limited or restricted depending upon the quality,
capabilities and technical limitations of your Internet
service.
The Network Services belong to third parties and
may be protected by copyright, patent, trademark
and/or other intellectual property laws. The Network
Services are provided solely for your personal and
noncommercial use. Unless expressly authorized by
the respective content owner or service provider,
you shall not modify, copy, republish, upload, post,
transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services accessible through this product.
BD592-N-AUSALLK-ENG.indd 99
UNDER NO CIRCUMSTANCES AND UNDER NO
LEGAL THEORY, WHETHER IN CONTRACT, TORT,
STRICT LIABILITY OR OTHERWISE, SHALL LG BE
LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, STATUTORY,
CONSEQUENTIAL OR OTHER DAMAGES OR
ATTORNEY FEES OR EXPENSES RELATING TO OR
ARISING OUT OF THE NETWORK SERVICES EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
IF SUCH DAMAGES COULD HAVE BEEN REASONABLY
FORESEEN.
The Network Services may be terminated or
interrupted at any time, and LG makes no
representation or warranty that any Network Service
will remain available for any period of time. Use of the
Network Services may be subject to additional terms
and conditions of the respective third party service
provider. The Network Services are transmitted by
third parties by means of networks and transmission
facilities over which LG has no control. LG EXPRESSLY
DISCLAIMS ANY RESPONSIBILITY OR LIABILITY
FOR ANY INTERRUPTION OR SUSPENSION OF ANY
NETWORK SERVICE.
LG shall be neither responsible nor liable for
customer service related to the Network Services.
Any question or request should be made directly to
the respective Network Service providers.
“Network Service(s)” means the third party services
accessible through this product including but
not limited to all data, software, links, messages,
video and other content found thereon or used in
connection therewith.
“LG” means LG Electronics, Inc. its parent company
and all of their respective subsidiaries, affiliates and
related companies worldwide.
7
Appendix
LG IS NOT RESPONSIBLE FOR YOUR USE OF
THE NETWORK SERVICES. THE NETWORK
SERVICES ARE PROVIDED “AS IS.” TO THE FULLEST
EXTENT PERMISSIBLE BY LAW, LG MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (i) FOR THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY
NETWORK SERVICE MADE AVAILABLE THROUGH
THIS PRODUCT; OR (ii) THAT THE NETWORK SERVICES
ARE FREE OF VIRUSES OR OTHER COMPONENTS
THAT MAY INFECT, HARM, OR CAUSE DAMAGE TO
THIS PRODUCT, YOUR COMPUTER, TELEVISION,
OTHER EQUIPMENT, OR ANY OTHER PROPERTY. LG
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
99
2010.1.7 12:14:43 PM
100
Appendix
Open source software
notice
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo,
ffmpeg, iconv, libusb, mpg123
gSOAP Public License 1.3 LIBRARY: gsoap
LG El ectronics offers to provide source code to
you on CD-ROM for a charge covering the cost of
performing such distribution, such as the cost of
media, shipping and handling upon e-mail request
to LG Electronics at: [email protected]
This offer is valid for a period of three(3) years from
the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/gpl2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .
Also you can obtain a copy of gSOAP public license
from http://www.cs.fsu.edu/~engelen/license.html.
This software is based in part on the work of the
Independent JPEG Group copyright © 1991 - 1998,
Thomas G. Lane.
7
Appendix
This product includes
• boost C++: copyright © Beman Dawes 1999-2003
• c-ares : copyright © 1998 by the Massachusetts
Institute of Technology
• curl: copyright © 1996 - 2008, Daniel Stenberg
• expat: copyright © 2006 expat maintainers
• freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
• jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
• mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
• ntp : copyright © David L. Mills 1992-2006
BD592-N-AUSALLK-ENG.indd 100
• OpenSSL:
– cryptographic software written by Eric Young
([email protected]).
– software written by Tim Hudson
([email protected]).
– software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org)
• png: copyright © 2004 Glenn Randers-Pehrson
• portmap : copyright © 1990 The Regents of the
University of California
• ptmalloc : copyright © 2001-2006 Wolfram Gloger
• UnitTest++ : copyright © 2006 Noel Llopis and
Charles Nicholson
• UPnP SDK : copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
• xml2 : copyright © 1998-2003 Daniel Veillard
• XML-RPC For C/C++:
copyright © 2001 by First Peer, Inc. All rights
reserved.
copyright © 2001 by Eric Kidd. All rights reserved.
• zlib: copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
associated documentation files (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
2010.1.7 12:14:43 PM
BD592-N-AUSALLK-ENG.indd 101
2010.1.7 12:14:43 PM
BD592-N-AUSALLK-ENG.indd 102
2010.1.7 12:14:43 PM
Warranty
103
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material
or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective
from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only
to the original purchaser of the product and effective only when used in the United States, excluding U.S.
Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of
Purchase.
Call 1-800-243-0000 for instructions on getting the defective
unit repaired or replaced.
PARTS: One Year from the Date of
Purchase.
Please retain dated sales receipt and your box to return the
unit to LG for repair or replacement.
• Parts replaced are warranted for the
remaining portion of the original
warranty period
Shipping both ways will be paid by LG during the Warranty
Period. After the Warranty Period, you pay inbound shipping
charges and LG pays return shipping charges.
Visit our web site at: http://us.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO
THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE
EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR
PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental
or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or
limitation may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
• Damages or operating problems that result from shipping, installation, adjustment of user controls,
calibration, maintenance or failure to maintain, or separate system components; and
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide,
accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect
electrical current or voltage, reception problem caused by inadequate home antenna or faulty antenna
connections, computer software, institutional or commercial use, or other causes not arising out of defect
in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
ENGLEWOOD CLIFFS, NJ
BD592-N-AUSALLK-ENG.indd 103
Call 1-800-243-0000 (24 hours a day, 365 days per year) and
select appropriate options from the menu.
Or visit our web site at http://us.lgservice.com
8
Warranty
For nearest Authorized Service Center,
Where to buy, Product Assistance, or
Customer Assistance
2010.1.7 12:14:44 PM
LG Customer Information Center
For inquires or comments, visit www.lge.com or call;
1-800-243-0000 USA, Consumer
1-888-865-3026 USA, Commercial
As an ENERGY STAR® Partner, LG
has determined that this product
or product models meet the
ENERGY STAR® guidelines for energy
efficiency.
ENERGY STAR® is a U.S. registered mark.
Register your product Online!
www.lge.com
Printed in Korea
BD592-N-AUSALLK-ENG.indd 104
2010.1.7 12:14:44 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement