Samsung | MAX-KDZ150 | Керівництво користувача | Samsung MAX-KDZ150 Керівництво користувача

DVD KARAOKE
MINI COMPONENT SYSTEM
DVD-OK/DVD/VCD/MP3-CD/CD
CD-R/RW PLAYBACK
MAX-KDZ150
Instruction Manual
Safety Warnings
GB
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Mini Component System player is
classified as a CLASS 1 LASER product.
1
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Contents
Thank you for buying this
SAMSUNG Mini Component System.
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
SAFETY WARNINGS...............................................................................1
INSTALLING YOUR MINI COMPONENT SYSTEM
Front Panel View ................................................................................4
Rear Panel View .................................................................................5
Display Window ..................................................................................6
Remote Control ..................................................................................7
Where to Install Your Mini Component System..................................8
Connecting your System to the Power Supply...................................8
Inserting Remote Control Batteries ....................................................8
Connecting the Loudspeakers............................................................9
Connection of the TV monitor ...........................................................10
Connection for better sound ..............................................................10
Connecting the AM(MW/LW) Aerial ...................................................11
Connecting the FM Aerial ..................................................................11
Connecting to an External Source ....................................................11
CD Digital Out Jack ...........................................................................11
Demo/Dimmer Function ....................................................................12
Setting the Clock ...............................................................................12
DVD/DVD-OK PLAYER
Loading and Changing Discs ............................................................13
Listening to a Disc .............................................................................13
To replay the MP3-CD .......................................................................14
Checking the Screen Display ............................................................15
Intro Play ...........................................................................................15
Fast Play ...........................................................................................16
Slow Play/Playing Frame by Frame ..................................................16
Skipping Chapters or Tracks .............................................................16
Directly Moving to a Title/Chapter/Time ............................................16
Repeat Play .......................................................................................17
A-B Repeat Play ................................................................................17
Random Play .....................................................................................18
Using the Menu on the Disc ..............................................................18
To Use the Title Menu .......................................................................18
Program Function ..............................................................................19
Audio Language ................................................................................20
Subtitle Language .............................................................................20
Screen Zoom .....................................................................................20
Angle .................................................................................................20
Language Setup ................................................................................21
Audio Setup .......................................................................................21
Options Setup ....................................................................................22
Rating Level/Password Setup ...........................................................22
Playing DVD-OK Discs ......................................................................23
Connecting Microphone ....................................................................23
Reserving Accompaniment Music .....................................................23
Priority Playing Accompaniment Music .............................................23
DVD-OK Repeat Play ........................................................................23
Search Song Function .......................................................................24
Key Control ........................................................................................24
Tempo Control ...................................................................................24
Highlight Lyrics ..................................................................................24
Male-Female Key Control..................................................................24
View Score ........................................................................................24
Fanfare Function ...............................................................................24
Melody Function ................................................................................24
Dolby Surround .................................................................................25
TUNER
Searching for and Storing the Radio Stations ...................................27
Selecting a Stored Station .................................................................28
Improving Radio Reception ...............................................................28
TAPE DECK
Listening to a Cassette ......................................................................29
Recording a Compact Disc ...............................................................29
Recording a Radio Program ..............................................................30
Copying a Cassette (Dubbing) ..........................................................30
Selecting the Cassette Playback Mode ...........................................30
Tape Counter .....................................................................................30
OTHER FUNCTIONS
Timer Function...................................................................................31
Cancelling the Timer..........................................................................31
Mute Function ....................................................................................32
Selecting an Equalizer Preset ...........................................................32
Power Surround Function..................................................................32
Subwoofer Level Function .................................................................32
Setting the System to Switch off Automatically .................................33
Microphone Function (option)............................................................33
Connecting Headphones ...................................................................33
RECOMMENDATIONS FOR USE
Safety Precautions ............................................................................34
Cleaning Your Mini Component System............................................34
Precautions When Using Discs .........................................................35
Precautions When Using Audio Cassettes........................................35
Before Contacting the After-Sales Service ........................................35
Technical Specifications ....................................................................36
Reference ..........................................................................................37
2
GB
GB
VIDEO
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround
sound and MPEG-2 video compression technology. Now you can enjoy these realistic effects in
the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order for
the disc to play. If the codes do not match, the disc will not play.
The Region Numeric for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Types
Marks
Recording
Types
Disc Size
Max. Playing Time
Approx. 240 min.(Single-sided)
12cm
DVD
Approx. 480 min.(Double-sided)
Audio+Video
VIDEO
VIDEO-CD
AUDIO-CD
Approx. 80 min.(Single-sided)
8cm
Audio+Video
Audio
Manufactured under license from dolby Laboratories “Dolby”
"Pro Logic" and the double-D symbol are trademarks
of Dolby Laboratories.Confidential Unpublished Works.
Approx. 160 min.(Double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
"DTS" and "DTS Digital Out "are trademarks of Digital Theater Systems,Inc.
C 1992-1997 Dolby Laboratories Inc. All rights reserved.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
•
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
3
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Front Panel View
GB
35
33
34
32 31
30
29
28
27
1
26
25
2
3
4
5
6
ey
ric K Reset
me
ter
N u C o un
k1
ec
e
Du
bb
in
/2
24
g
D
Selec
t So
ng
eM
od
Rev er s
P
ex
ev
t
Pr
7
8
9
10
N
io
us
Tuning Mode
21
20
19
11
12 1314 15
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
23
22
Display Window
Timer On/Off button
Timer/Clock button
Demo/Dimmer button
REC/Pause button
Standby/On(
) button
Mic Jack connector 1
Mic Level
Mic Jack connector 2
Echo button
Cassette Deck 1
TUNER Band button
TAPE button
DVD/DVD-OK( ) button
AUX button
Cancel button
Previous/Next skip or search button
Stop( ) /Tuning Mode button
16
17
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
18
Reserve/Program button
Cassette Deck 2
Enter button
Headphone Jack connector
Power Surround button
Multi Jog
Tempo
Key Control
Volume
Dubbing button
Reverse Mode button
Counter Reset button
Deck 1/2 button
Open/Close( ) button
Disc Change button
Disc Selection Buttons
Numeric buttons
Disk Compartment
4
Rear Panel View
GB
1
2
3
4
5
6
7
8
9
10
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
5
FM Aerial Connector Terminal
AM Aerial Connector Terminals
Main speaker Connector Terminals
Digital Out Jack(optical)
Subwoofers speaker Connector Terminals
Line Out
Video Out
Center speaker Connector Terminals
AUX Input
Rear speaker Connector Terminals
Display Window
GB
1. Power Surround
2. Sound mode
3. Volume and EQ Level
4. Tuner Preset and Title
5. Main Display(Function, Frequency, Time, etc.)
6. Chapter
7. VCD
8. FM mode(Stereo)
9. EQ
10.DSP
11.Tape Reverse mode
12. Sleep
13. CD Playing Disc mode or CD Repeat mode
14. MP3
15. Clock
16. Disc Playing numeric
17. Recording
18. TAPE 1/2
19. Tuning mode(AUTO)
20. Program
21. Tuner Preset
22. TUNED
Accessories
REMOTE CONTROL
AM(MW)/LW
ANTENNA
FM ANTENNA
VIDEO/ AUDIO
CABLE
MANUAL
DVD KARAOKE DISC
SONG LIST BOOK
MIC
6
Remote Control
GB
Standby/On(
button
)
1
2
3
Mute
Mute button
4
5
6
Search Song
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
Numeric button(0~9)
SET
Dolby Surround button
MO/ST
Stop button
DVD-OK/DVD/TUNER
Skip button
Search Song button
Program/Set button
Cancel/Clear,
MO/ST button
EQ button
Skip button
Down
Up
Tuning
Play/Pause button
Tuning Up/Down button
Move/Enter button
Enter
+
Volume button
Volume
TAPE
Tape Fast-Forward
/Rewind Button
Sound Edit button
Tuner(Band) button
Step button
Male/Female button
Key Control button
Tape Stop button
Tape Play button
SPK Edit button
Tuner
Band
Sound Edit
Male/Female
Step
SPK Edit
Test Tone
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
b
Tempo button
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
Menu button
Audio button
Display button
7
Test Tone button
Sleep button
Melody button
Repeat button
Hi-Light button
Fanfare button
Go To button
Slow button
Return button
Subwoofer Level button
Title button
Zoom button
Setup button
Angle button
Subtitle button
Score button
Where to Install Your Mini Component System
Inserting Remote Control Batteries
GB
To take full advantage of your new Mini Component System, follow these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the disc compartment
easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
Insert or replace remote control batteries when you:
Purchase the Mini Component System
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
1
Place your thumb on the position marked
on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
3
Replace the cover by sliding it back until it clicks into position.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
ey
ric K Reset
me
ter
Nu Coun
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
P
Pr
io
ex
t
ev
s
u
N
Tuning Mode
Connecting your System to the Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage.
1
2
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
Press the Standby/On button to switch your Mini Component System on.
8
Connecting the Loudspeakers
GB
Main Speaker (R)
Main Speaker (L)
Subwoofer(R)
Subwoofer(L)
Center Speaker
Rear Speaker (R)
7 couples of speaker connector terminals are located on the rear of the system.
To achieve the correct sound quality, connect the:
Red wire to the + terminals
Black wire to the – terminals
Blue wire to the + terminals
1
2
3
4
9
To connect a wire to a terminal, push the tab as far as it will go:
To the right on the system
Insert the wire, up to the plastic sheathing, in the hole.
Push the tab back:
To the left on the system, until it clicks into place
To the top on the loudspeaker
Result: The wire is pinched and held firmly in place.
Repeat the operation for each wire.
Rear Speaker (L)
Connection of the TV monitor
GB
The following show examples of connections commonly used to connect
the DVD player with a External Source.
VIDEO OUT
VIDEO IN
Composite video
(Supplied)
Connection for better sound
Connecting to an amplifier with Dolby Pro Logic support.
What is Dolby Pro Logic?
Using five speakers, it recreates the original sound of the music or audio and provides the sense of presence, as if you were in a movie theater or
concert hall.
When playing a DTS disc, no sound is produced. In such case,
use an amplifier equipped with a DTS decoder.
DIGITAL OUT
(OPTICAL)
Amplifier
OPTICAL INPUT
10
Connecting the AM(MW/LW)
Aerial
Connecting to an External Source
GB
The AM(MW)/LW aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM(MW)/LW aerial connector terminals are located on the rear
of the system and are marked AM(MW)/LW.
The auxiliary input can be used to take advantage of the
sound quality of your Mini Component System when listening
to other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To avoid noise interference, check that the loudspeaker wires
do not run close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
To connect the external source, the source must have an audio
output. In addition, you need an RCA connection cable.
1
2
Set the system to standby mode and disconnect it and the external
source from the main.
Connect the audio cable to the rear of the Mini Component System.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press Standby/On to
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
Switch the external source on.
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 28 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the
rear of the system using a 75Ω coaxial cable (not supplied).
CD Digital Out Jack
This unit can output digital sound signals through this jack.
Use an optical cable to connect digital audio equipment.
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the DIGITAL OUT jack. Then,
connect an optical cable plug to the DIGITAL OUT jack.
When the DIGITAL OUT jack is not being used
Attach the supplied dust cap.
11
Demo/Dimmer function
Setting the Clock
GB
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
Press the Demo/Dimmer button.
Result: All functions available on the system appear on the front
panel display.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Each of these are explained in detail in this guide. Please refer to
the relevant section.
2
Press the Demo/Dimmer button again.
Result: The Dimmer function is selected and the display darkens.
1
2
3
Press the Demo/Dimmer button once again to brighten the front
panel display.
3
A display brightness control can only be performed while the
system power is on.
ey
ric K Reset
me
ter
Nu Coun
Selec
t
R e v er s
eM
Press the Timer/Clock button twice.
Result: CLOCK is displayed.
Press the Enter button.
Result: The hour flashes.
To...
Turn the Multi Jog knob to the...
Increase the hours
Decrease the hours
Right
Left
5
When the correct hour is displayed, press the Enter button.
Result: The minutes flash.
6
To...
Turn the Multi Jog knob to the...
Increase the minutes
Decrease the minutes
Right
Left
So
ng
ode
Du
bb
in
/2
g
7
When the correct time is displayed, press the Enter button.
Result: The clock starts and is displayed, even when the system is in
standby mode.
P
Pr
t
ev
s
u
N
Tuning Mode
You can display the time, even when you are using another
function, by pressing Timer/Clock button once.
You can also use
buttons to instead Multi Jog knob
in step 4, 6.
ey
ric K Reset
me
ter
Nu Coun
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
k
ec
2
1
Pr
ev
io
u
s
4,6
3,5,7
P
t
io
ex
D
k1
ec
4
Switch the system on by pressing Standby/On button.
ex
1
Your system is equipped with a clock which allows you to
turn your system on and off automatically. You should set the
clock:
When you first purchase the Mini Component System
After a power failure
After unplugging the unit
N
Tuning Mode
12
Loading and Changing Discs
Listening to a Disc
GB
The disc changer can contain up to three 12 cm or 8 cm discs
without using an adapter.
Never press down or place objects on the carrousel.
This unit has been designed to playback the CDs: Audio CD,
Video CD,DVD,DVD Karaoke,MP3-CD.
When you have loaded at least one disc into the player, you
can start listening to it.
Continued use of irregular shape discs (heart-shape, octagonal,
etc.) can damage the unit.
Always treat your discs with care; refer, if necessary, to the section
entitled “Precautions When Using Discs” on page 35.
1
Switch the system on by pressing Standby/On button.
2
Select the DVD/CD function by pressing DVD/DVD-OK (
on the front panel.
3
Load one or more discs.
4
Press the DVD/DVD-OK (
Never force the disc carrousel when opening and
closing the compartment.
1
2
3
Switch the system on by pressing Standby/On button.
Press the Open/Close( ) button on the front panel.
Result: The compartment opens.
Place one or two discs in the front slots of the carrousel, with the
label on the discs facing upwards.
Check that the disc has been correctly inserted in the holder
before closing the compartment.
4
If you wish to load a third compact disc, press the Disc Change
button on the front panel .
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the Open/Close( ) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
To play...
Press...
Disc 1
DVD/DVD-OK(
) or Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
Play/Pause(
) button
) button on the front panel or
) button on the remote control.
If you have loaded more than one disc, they will be played in turn.
5
Adjust the volume as required by:
Turning the Volume + or - knob on the front panel
or
Pressing the Volume + or - buttons on the remote control
6
To pause temporarily during playback, press the DVD/DVD-OK (
button.
Press the DVD/DVD-OK (
playback.
7
Press the Stop(
) button again to continue disc
) button when you have finished.
When playing a disc, you can load new discs without
stopping the current one. To do so, open the compartment by
pressing Disc Change button and load new discs in the other two
vacant slots (not the one containing the disc that you are playing).
You cannot rotate the carrousel during playback.
When no discs are loaded, the “NO DISC” indication is displayed.
The DVD player stops automatically after playing the three discs, if
the DVD REPEAT function has not been selected.
4
5
2,5
5
ey
ric K Reset
me
ter
Nu Coun
k
ec
eM
So
ng
ode
Du
bb
in
1/2
g
D
Selec
t
R e v er s
2,4,6
Selec
t
eM
So
ng
ode
Du
bb
in
P
Pr
1
ev
t
R e v er s
g
io
s
N
u
1
5
D
1/2
ex
ey
ric K Reset
me
ter
Nu Coun
k
ec
Tuning Mode
7
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable)
can be played back only if they are already “finalized”.
• You can play back your original CD-Rs or CD-RWs recorded in
music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
• CD-RWs may require a longer readout time. (This is caused by
the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
13
)
TO replay the MP3-CD
GB
The track of the MP3-CD desired to listen may be selected on
stopping or during playbacks.
1
2
3
4
Switch the system on by pressing Standby/On button.
Select the MP3 function by pressing DVD/DVD-OK (
the front panel.
) button on
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
Load one or more MP3-CDs.
File Compatibility
Press the
/
buttons or the number buttons or turn Multi Jog
knob to select the track.
Every time 10 tracks are displayed on the screen in the stop mode.
00001
07 gfc-ParaPara.mp3
...
..
..
.
00066
10 XXXYXXY.MP3
Press the (
The unit will playback files created in MP3 format
(Mpeg1.Layer3) with *.mp3 as their extension.
Files created in MP2 format (Mpeg1.Layer2) with
*.mp2 as their extension can also be played back.
182
01 XXXXXXX.MP3
How many MP3 files can a CD-R or CD-RW disc record?
The maximum capacity of one CD-R or CD-RW disc is
680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
) button or Enter button to playback.
Press the Stop(
) button to stop playback.
Regarding the playback of CD-R/RW
m
Nu
1
k
ec
y
nter
Co u
4
R e se t
Selec
t
So
R e v er s
ng
eM
od
e
Du
bb
in
1/2
g
D
Ke
eric
2,5
4
4
Pr
t
ev
io
ex
5
6
What is MP3?
s
u
N
Tunin
g Mode
4
6
1
2
3
4
5
6
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
Mute
4Search Song
SET
MO/ST
2,5
4
DVD-OK/DVD/TUNER
4Down
Tuning
P
5
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewritable) and editing by
the user, playback is processed on the respective
completed status. (The player may not be played back
according to the characteristics of the CD or recorded
status.)
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
Playback sequence of titles and tracks
In case of Window Explorer display.
The arrows indicates playback sequence of titles and
tracks.
Tracks with jpg, wav or doc only are not audio files and
therefore will be skipped.
Up
(E) CD-ROM drive
TITLE 01
Skipped
Kevin01.mp3
Kevin02.mp3
Kevin03.mp3
Kevin04.mp3
Kevin.jpg
Life.doc
TITLE 02
TITLE 04
Summer05.mp3
Summer06.mp3
Garden.mp3
Garden.mp3
TITLE 03
TITLE 05
Michael07.mp3
Michael08.mp3
Water.mp3
Water.mp3
Skipped
TITLE 06
Kenny01.wav
Kenny02.wav
TITLE 07
Butterfly.mp3
Piano14.mp3
John15.mp3
14
Checking the Screen Display
Intro Play
GB
Press the Display button.
You can play the first 10 seconds of each track.
Indicates the total Indicates the total
numeric of titles on numeric of chapters
the disc
in the current title
Title display
Chapter
display
Indicates the total
play time of the
current title
Audio Language
display
Subtitle
Angle Repeat Play A-B Repeat Disc Type
Language display display
Play display display
display
Indicates the total numeric of
tracks on the disc
Press the Display button
2
Use
3
Press the Enter button.
buttons to move to the Intro Play display.
Indicates the total play time
of the current track
PBC
ON
Track display
1
Random Play
display
Intro Play
display
Each time the button is pressed, the display will alternate
between ON and OFF.
Select ON to play the first 10 seconds of each track.
Repeat Play A-B Repeat PBC display
display
Play display
Enter
2
Tuner
Band
Sound Edit
SPK Edit
Test Tone
Male/Female
Step
Sleep
Melody
3
2
+
Volume
TAPE
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Tuner
Band
Sound Edit
Male/Female
Step
b
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
SPK Edit
Test Tone
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Slow
Go To
b
What is a Title?
A title refers to a single whole movie.
What is a Chapter?
A chapter is one of the several sections to which a movie is
divided into.
To Mute the Sound
During playback, press the Mute button.
This is useful when answering a doorbell or telephone call.
After 3 minutes in Pause mode, your player will automatically
go into Pre-Stop mode.
15
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
1
Skipping Chapters or Tracks
Fast Play
GB
During playback, you can quickly move to the desired scene
or song.
Use
/
buttons on the remote control or rotate the Multi Jog
Knob on the main unit.
Each time either button is pressed, playback starts from the beginning of the previous or next chapter (or track).
Use
/
But, you cannot skip chapters consecutively.
buttons.
To play from the beginning of...
Rotate the Multi Jog knob...
Next track
one notch to the right
Current track
one notch to the left
Previous track
two notches to the left
Track of your choice
as many notches to the left or
right as needed
During fast play or step motion, sound will not be normal.
When playing a CD, you can only use 2x and 8x speeds.
DVD-OK/DVD/TUNER
DVD OK/DVD/TUNER
Down
Down
Tuning
Up
Tuning
Up
Enter
E te
Slow Play/Playing Frame by Frame
Directly Moving to a Title/ Chapter/Time
1
Press the Go To button.
2
Use the Numeric buttons (0-9) to select the desired scene and then
press the Enter button.
Press the Slow button.
The corresponding display will be selected.
Slow
1/2
1/4
1/8
Playback of the selected scene starts. Depending on the disc,
moving to a title may not work.
1/16
PLAY
Male/Female
Step
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
b
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
Subwoofer Level
Playing Frame by Frame
Press the Step button.
The picture moves forward one frame each time the button is pressed.
No sound is heard during high-speed playback and step motion.
16
Repeat Play
A-B Repeat Play
GB
Press the Repeat button.
Repeat
1
Press the Display button.
2
Use
3
Press the Enter button at the beginning of the segment (point A)
you want to play repeatedly.
buttons to move to the A-B Repeat Play display.
A
*
4
Press the Enter button at the end of the segment (point B).
The specified segment will be played repeatedly.
AB
Repeat Play operation is not possible with version 2.0 VCD
discs if PBC is turned on. To use this feature, press the Menu
button to select "PBC OFF".
To Cancel A-B Repeat Play
Press the Enter button again.
Tuner
Band
Sound Edit
Male/Female
Step
SPK Edit
Test Tone
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Slow
Go To
b
17
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
Random Play
Using the Menu on the Disc
GB
You can play scenes/songs in random order.
1
Press the Display button.
2
Use
3
Press the Enter button.
Each time the button is pressed, the display will alternate between
ON and OFF.
Select ON to start Random Play.
You can use the menu for the audio language, subtitle
language, profile, etc. DVD menu contents differ from
disc to disc.
1
buttons to move to the Random Play display.
Tuner
Band
Sound Edit
SPK Edit
Test Tone
Male/Female
Step
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Slow
Go To
2
3
During playback, press the Menu button.
The menu screen appears .
When playing a VCD (version 2.0), this toggles between PBC
ON and OFF.
Use
buttons to select the desired item.
Press the Enter button.
The selected item will be played.
Tuner
Band
Sound Edit
Male/Female
Step
SPK Edit
Test Tone
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
b
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
To Use the Title Menu
For DVDs containing multiple titles, you can view the title
of each movie.
b
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
During playback, press the Title button.
Depending on the disc, this function may either not work at
all or may work differently.
Tuner
Band
Sound Edit
SPK Edit
Test Tone
Male/Female
Step
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
b
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
18
Program Function
Program Function (Continued)
GB
You can watch movies or listen to songs in the desired
order.
1
In Stop mode, press the
Program/SET button.
PROGRAM MENU
TRACK
1
2
3
4
5
PREVIOUS
TRACK
6
7
8
9
10
NEXT
PLAY
To Change the Program Order
1
2
3
Use
buttons to select the track numeric you want to change.
Press the Numeric buttons (0-9) and then press the Enter button.
Repeat step 1 to 2 above to change the program order.
To Cancel the Program
2
3
4
5
Use the Numeric buttons (0-9) to
select the track numeric you want
to program and then press the
Enter button.
Press
button to move to the
next numeric.
PROGRAM MENU
TRACK
1 11
2
3
4
5
PREVIOUS
TRACK
6
7
8
9
10
NEXT
PLAY
Use the Numeric buttons (0-9) to
select the track numeric you want
to program and then press the
Enter button.
Repeat steps 3 to 4 to continue to
program the tracks .
TRACK
6
7
8
9
10
NEXT
PLAY
TRACK
1 11
2 12
3
4
5
PREVIOUS
TRACK
11 11
12
13
14
15
PREVIOUS
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
TRACK
6
7
8
9
10
NEXT
PLAY
TRACK
16
17
18
19
20
NEXT
PLAY
SET
MO/ST
DVD-OK/DVD/TUNER
Down
Tuning
Up
To Play the Program
Press the Play/Pause(
) button.
To Cancel During the Programmed Play
In the stop mode,press the Program/SET button or the Stop button.
19
) button twice.
) button once.
The entire program will be cleared if you press the Open/Close
( )button on the front panel to open and then close the tray.
Press the Cancel/Clear button.
To clear tracks from the program, select the tracks you want to
clear and then press the Cancel/Clear button.
PROGRAM MENU
PROGRAM MENU
To program more than 10 tracks,
press the Enter button while NEXT
is selected. A screen appears,
allowing you to program 10 more
tracks from 11 to 20.
In Stop mode, press the Stop(
To Clear Incorrectly Entered Numeric
PROGRAM MENU
TRACK
1 11
2
3
4
5
PREVIOUS
During playback, press the Stop(
The program function does not work with DVD discs.
Audio Language
Screen Zoom
GB
1
2
Press the Audio button.
Use
buttons to select the desired audio language.
Depending on the numeric of languages on a DVD disc, a different audio
language (KOREAN, ENGLISH, JAPANESE, etc.) can be selected.
Press the Zoom button.
Each time the Zoom button is pressed, the zoom function will switch
On/Off.
b
Tempo
Score
Fanfare
Slow
Go To
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
b
Tempo
Score
Fanfare
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
Depending on the disc, you can also select DTS or DOLBY PRO
LOGIC.
To listen to DTS audio tracks, connect an amplifier with a built-in
DTS decoder to the Optical Out.
Subtitle Language
1
2
Angle
1
Press the Angle button
The multiple angle function only works with discs on which multiple angles are recorded
2
Use
buttons to select the desired angle
The selection changes as follows: 1/3 --> 2/3 --> 3/3 --> Normal
Press the Subtitle button.
Use
buttons to select the desired subtitle.
Depending on the numeric of subtitles on a DVD disc, a different subtitle
(KOREAN, ENGLISH, JAPANESE, etc.) can be selected. Select OFF to make
the subtitles disappear.
b
Tempo
Key Control
Score
Fanfare
Repeat
Menu
Title
Slow
Go To
Score
Fanfare
Audio
Subtitle
Zoom
Return
Slow
Go To
Display
Setup
Angle
Subwoofer Level
Hi-Light
b
Tempo
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being
operated, that operation is not possible with the disc currently
being played.
Depending on the disc, the Subtitle and Audio Language functions may not work.
20
Language Setup
Audio Setup
GB
You can set up the screen display, audio language, subtitle language,
and menu language by using the Mini Component System player's
Setup feature.
You can set the condition for the output to the Optical Digital Out Jack.
1
In Stop mode, press the Setup
button.
LANGUAGE
AUDIO
OPTION
1. AUDIO
2. SUBTITLE
1
In Stop mode, press the Setup
button.
LANGUAGE
AUDIO
1. AUDIO
2. SUBTITLE
OPTION
PARENTAL
ENGLISH
ENGLISH
2
Press
"AUDIO".
buttons to select
LANGUAGE
AUDIO
OPTION
1. DIGITAL AUDIO
2. ANALOG AUDIO
2
Use
buttons to move
to a submenu.
LANGUAGE
PARENTAL
ENGLISH
ENGLISH
AUDIO
1. AUDIO
2. SUBTITLE
OPTION
PARENTAL
PCM
Lo-Ro
PARENTAL
ENGLISH
ENGLISH
SELECT THE AUDIO LANGUAGE
3
Use
buttons to move
to a submenu.
1. AUDIO
2. SUBTITLE
LANGUAGE
AUDIO
1. DIGITAL AUDIO
2. ANALOG AUDIO
OPTION
PARENTAL
PCM
Lo-Ro
PCM DIGITAL AUDIO OUTPUT
3
Press
button to select
the desired language.
LANGUAGE
AUDIO
1. AUDIO
2. SUBTITLE
OPTION
KOREAN
ENGLISH
PARENTAL
4
Press button to select
the desired item.
LANGUAGE
AUDIO
1. DIGITAL AUDIO
2. ANALOG AUDIO
SELECT THE AUDIO LANGUAGE
OPTION
PARENTAL
BITSTREAM
Lo-Ro
BITSTREAM DIGITAL AUDIO OUTPUT
To End the Language Setup
Press the Setup button again
DIGITAL AUDIO
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Slow
Go To
Male/Female
Step
BITSTREAM
b
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
Select this if you have Dolby Digital 5.1
Channel connection
Transmits digital signal carrying Dolby Digital
5.1 or DTS multi-channel information to the
external decoder
LPCM
Select this if you do not have Dolby Digital
5.1 Channel connection
Transmits Linear PCM (Pulse Code Modulation)
or 2-Channel Stereo Signal to the A/V receiver
Press Return or Setup button again to exit Menu setup.
21
Options Setup
Rating Level/Password Setup
GB
You can set the TV aspect ratio and video format.
1
In Stop mode, press the Setup
button.
LANGUAGE
AUDIO
Use this to restrict playback of adult or violent DVDs you do not
want children to view.
OPTION
1. AUDIO
2. SUBTITLE
2
Press
"OPTION".
PARENTAL
1
ENGLISH
ENGLISH
2
AUDIO
1. TV
2. VIDEO MODE
OPTION
PARENTAL
3
LANGUAGE
AUDIO
1. TV
2. VIDEO MODE
Use
buttons to select
"PARENTAL".
OPTION
AUDIO
OPTION
LANGUAGE
Use
buttons to move
to a submenu.
LANGUAGE
PARENTAL
ENGLISH
ENGLISH
AUDIO
OPTION
INPUT PASSWORD
RATING LEVEL
NEW PASSWORD
CONFORM PASSWORD
WIDE
NTSC
3
Use
buttons to move to a
submenu.
LANGUAGE
1. AUDIO
2. SUBTITLE
button to select
LANGUAGE
In Stop mode, press the Setup
button.
PARENTAL
****
L +------- H
****
****
AUDIO
OPTION
INPUT PASSWORD
RATING LEVEL
NEW PASSWORD
CONFORM PASSWORD
PARENTAL
PARENTAL
****
L +------- H
****
****
WIDE
NTSC
WIDE SCREEN IN THE 16:9 TV
4
4
Press
button to select the
desired item.
LANGUAGE
AUDIO
1. TV
2. VIDEO MODE
OPTION
PARENTAL
4:3 PAN SCAN
NTSC
Use the Numeric buttons (0-9)
to enter the password.
By default, the password is set
to "7890".
FULL HEIGHT IN THE 4 : 3 TV
LANGUAGE
AUDIO
OPTION
INPUT PASSWORD
RATING LEVEL
NEW PASSWORD
CONFORM PASSWORD
PARENTAL
---*
L +------- H
****
****
Password Setup
1. Press
button to move to "NEW
PASSWORD" and then use the Numeric
buttons (0-9) to enter a new password.
TV
Select this to view 16:9 ratio movies on a 4:3 ratio TV.
LANGUAGE
AUDIO
1. TV
2. VIDEO MODE
OPTION
LANGUAGE
AUDIO
OPTION
INPUT PASSWORD
RATING LEVEL
NEW PASSWORD
CONFORM PASSWORD
PARENTAL
****
L +------- H
---*
****
2. Press
button to move to
"CONFIRM PASSWORD" and then use
re-enter your new password.
PARENTAL
WIDE
NTSC
WIDE SCREEN IN THE 16:9 TV
5
Use
button to move to "RATING
LEVEL".
LANGUAGE
AUDIO
OPTION
INPUT PASSWORD
RATING LEVEL
NEW PASSWORD
CONFORM PASSWORD
4:3LB
Select this to play wide DVDs in the letter box
mode with black strips at the top and bottom.
4:3PS
Select this to play wide DVDs in the pan and
scan mode with the sides of the picture cut off.
WIDE
Select this to play wide DVDs in the full-screen
mode with the top and bottom of the screen cut off.
However, you cannot view in the full-screen mode if the movie on
a disc is in 4:3 ratio.
VIDEO MODE
Each country has a different video format standard .
For normal playback, the video format of the disc must be
the same as the video format of your TV .
6
Press
button to select the
desired rating level.
Rating Level can be set between
0 and 8 levels.
LANGUAGE
AUDIO
INPUT PASSWORD
RATING LEVEL
NEW PASSWORD
CONFORM PASSWORD
PARENTAL
****
L --+----- H
****
****
OPTION
PARENTAL
****
L ------+- H
****
****
If you have selected Level 6, you
cannot view DVDs with Level 7
or higher.
If you have forgotten your password
While the player is in NO DISC mode, hold the main unit's Stop(
for longer than 5 seconds.
) button
"INITIAL" appears on the display and all settings will return to
the default values.
For example, you will not be able to play a PAL encoded disc
on an NTSC TV.
Press Return or Setup button again to exit Menu setup.
22
Playing DVD-OK Discs
Reserving Accompaniment Music
GB
You can enjoy the feeling of a karaoke bar in the comfort of your
home. Watch the video and sing along the lyrics displayed on the TV
screen against the accompaniment.
While the accompaniment is playing, you can reserve the next song
you want to sing.
1
1
Use the Numeric buttons (0-9) to
enter the numeric of the song
you want to play.
2
Use the Numeric buttons (0-9) to
enter the numeric of the song
you want to reserve.
Press the Program/SET button.
Under a love’s sky gonna be with you
And no-one’s gonna be around
The next song is reserved.
2
Press the Play/Pause(
)
button or the Enter button.
The numeric and title of the song will
be displayed and the accompaniment
starts.
To Cancel the Reservation
1
2
Can’t fight the moonlight
Singer : Leahn limes
To Clear Incorrectly Entered Song Numeric
Enter the numeric of the song you have reserved.
Press the Cancel/Clear button.
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
Press the Cancel/Clear button.
SET
To Stop During Accompaniment
MO/ST
Press the Stop button.
DVD-OK/DVD/TUNER
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
Priority Playing Accompaniment Music
SET
Dolby Surround
EQ
0
Cancel/Clear
MO/ST
Even if there is a song already reserved, you can have the song you
want to sing to be played first.
DVD-OK/DVD/TUNER
Down
Tuning
Up
Connecting Microphone
1
Connect the microphone to the
MIC jack on the front panel.
You can connect up to two
microphones.
ey
ric K Reset
me
ter
Nu Coun
D
k
ec
S
R e v er
1/2
Use the Numeric buttons (0-9)
to enter the numeric of the song
you want to reserve.
2
Press the Play/Pause(
r
/T
k
Tuning Mode
2
Turn the Mic Level to adjust the
volume.
3
Press the Echo button turn the
echo ON or OFF.
23
) button.
DVD-OK Repeat Play
Press the Repeat button.
le
Tit
ac
1
Repeat
Baby one more time
Singer : Britney Spears
Search Song Function
Male-Female Key Control
GB
You can easily do song search on screen without viewing the song
list book.
1
2
3
Press the Male/Female button
Each time the button is pressed, this selection alternates between Male and Female
Select Male when singing in male voice and
select Female when singing in female voice
Nothing can be altred there is
nothing to decide
Press the Search Song button.
Press
buttons to select the desired item and then press the
Enter button.
Press
buttons to select the desired song and then press the
Enter button.
The number and title of the song will be displayed and the accompaniment
starts.
Press Search song button to return to the previous level.
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
SET
View Score
Press the Score button.
Each time the button is pressed, the selection
alternates between Score ON and Score OFF .
Select Score ON to display the score of your
singing.
Score On
Nothing can be altred there is
nothing to decide
Fanfare Function
MO/ST
Press the Fanfare button.
Each time the button is pressed, the selection
alternates between Fanfare ON and Fanfare OFF .
Select Fanfare ON to hear the fanfare after the
singing is over.
DVD-OK/DVD/TUNER
Key Control
Fanfare On
Nothing can be altred there is
nothing to decide
Use the Key Control buttons.
Each time # button is pressed, the key is
increased, and each time b button is pressed, the
key is decreased .
An empty street, An empty house
A hole inside my heart
Tempo Control
Melody Function
Press the Melody button.
Each time the button is pressed, this selection
alternates between Melody ON and Melody OFF.
Select Melody ON to hear to the melody during
accompaniment.
Use the Tempo buttons.
Melody On
Nothing can be altred there is
nothing to decide
Each time + button is pressed, the tempo gets
faster, and each time - button is pressed the
tempo gets slower.
Under a love’s sky gonna be with you
And no-one’s gonna be around
Highlight Lyrics
Tuner
Band
Sound Edit
SPK Edit
Male/Female
Step
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Slow
Go To
Test Tone
b
Menu
Title
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
Press the High-Light button.
A black bar appears by the lyrics area.
Under a love’s sky gonna be with you
And no-one’s gonna be around
24
Dolby Surround
Dolby Surround
GB
Adjusting Speaker Level Balance
Dolby Surround modes
Press the Dolby Surround button.
PRO-Logic is selected, and the playback sound has the Dolby
Surround effect.
To cancel Dolby Surround mode
Press the Dolby Surround button repeatedly until PASS is
displayed.
The unit is equipped with a built-in test signal generator called a
noise sequencer which outputs a noise signal that ‘travels’ from
channel to channel. This enables the simple adjustment of sound
levels, to achieve, at the listening position, the same apparent
loudness from each channel. Use the remote control.
1
Press the Dolby Surround button.
Result: “
7
8
9
Program
SET
Dolby Surround
0
EQ
2
PRO-LOGIC” appears on the displayed.
Press the Test Tone button.
A noise signal is sent to each channel in turn in the following
sequence.
Cancel/Clear
MO/ST
L
CNTR
R
REAR
DVD-OK/DVD/TUNER
(L : Left Speaker, CNTR : Center Speaker,
R : Right Speaker, REAR : Rear Speaker)
When playing DVD, if an Audio is Dolby Digital(multi-channel), it
can not be operated.
When being connected to headphones and microphone, this
function cannot be operated.
3
4
Press the Test Tone button again to stop the noise signal.
To change the sound levels or delay time after adjusting the balance
with the noise sequencer.
Press the Sound Edit button.
While L, R, CNTR, REAR is displayed, press the UP/DOWN
Additional Dolby Surround modes
In addition to the PRO-Logic mode, this unit is also equipped with the
3 STEREO modes.
PRO-Logic : Use this mode when rear speakers are connected. The
center channel signals are output through the left and right speakers.
3 STEREO : Use this mode when no rear speakers are connected. This
mode reproduces rear sounds through the front speakers.
PRO-Logic
3 STEREO
PASS
(
/ ) button to adjust the level:
L 0~-9,R 0~-9,CNTR -6~6,REAR -6~6.
Press the SPK Edit button.
While CNTR, REAR, DELAY TIME is displayed, press the
UP/DOWN ( /
) button.
– CNTR : Large/Small/None
– REAR : USE/None
– DELAY TIME : 15/20/25/30 mS
When the Dolby surround system is on, this function can be operated.
SET
Dolby Surround
Depending on the sound source or listening conditions, a surround
effect may not be obtained even when the Dolby Surround is on.
The full Dolby Surround effect cannot be obtained when using softDOLBY SURROUND
ware without
mark. In this case, use the DSP
system instead. P R O L O G I C
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
0
Cancel/Clear
EQ
MO/ST
1
DVD-OK/DVD/TUNER
Down
Up
Tuning
4
Enter
SET
4
MO/ST
+
Volume
TAPE
DVD-OK/DVD/TUNER
Down
Tuning
4
Up
Tuner
Band
Sound Edit
SPK Edit
Male/Female
Step
Sleep
4Test Tone
Melody
2,3
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
b
Enter
+
Volume
TAPE
25
Dolby Surround (Cont’d)
Dolby Surround (Cont’d)
GB
Speaker Setting Methods
When 5.1 Channel Surround Sound is played, you can enjoy the
best sound if the distance between you and each speaker is the
same. You can set Delay Time in the Center/Rear Speaker to
customize the sound to the acoustics of your room.
Setting Center Speaker
If the distance of Dc is equal to or longer than the distance of Df in
the figure, set the mode as 0ms.
Otherwise, change the setting according to the table on the table.
Setting Rear Speakers
If the distance of Df is equal to the distance of Ds in the figure, set
the mode as 0ms.
Otherwise, change the setting according to the table.
ey
ric K
me ounter Reset
Nu
C
ck
De
Sele
ct S
on
eM
g
Revers
1/2
ode
Du
bb
in
g
P
ck
le
Tit
r
/T
/T
ra
To set the delay time
ac
tl
Ti
k
e
Tuning Mode
(A)=Df-Dc
Distance of (A)
Value(ms)
50
100
400
200
1.3
2.6
3.9
5.3
Front/Woofer Speakers
(B)=Df-Ds
Distance of (B)
Value(ms)
Set the front speakers so that their tweeters (high-range) are aligned
at about ear level and at a horizontal angle of 45° to the prime
listening position.
200
5.3
400
10.6
Center Speaker
600
15.9
Ideally the center speaker should be positioned with its top surface
flush with the front speakers. However, you may place the speaker
either on top or near the bottom of your TV set.
Dc: Distance from center speaker to
listening position
Df: Distance from front speakers to
listening position
Ds: Distance from rear speakers to
listening position
Rear Speakers
Set the rear speakers further back parallel to the walls, at 60 to 90
centimeters (2 to 3 feet) above prime listening position ear level.
If the space behind the listening position is insufficient (i.e., too
close to the wall), place the rear speakers facing each other on
either side.
Ideal Center Speaker Position
Dc
Df
Ds
Ideal Rear Speaker Position
Arrange all speakers within a circle as
shown in the figure.
Manufactured under license from Dolby Laboratories. “Dolby,”
“Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992-1997
Dolby Laboratories, Inc. All rights reserved.
"DTS" and "DTS Digital Out "are trademarks of Digital Theater
System,Inc.
26
Searching for and Storing the Radio
Stations (continued)
Searching for and Storing the Radio Stations
GB
You can store up to:
8
15 FM stations
8 AM(MW) stations
7 LW stations
a Press the Program button.
Result: The PRGM is displayed for a few seconds.
Switch the system on by pressing Standby/On button.
Select the TUNER function by pressing TUNER Band button.
Select the required frequency band by pressing TUNER Band button
again on the front panel or TUNER Band button on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW
Long Wave
To search for a
station...
Press Tuning Mode
Manually
One or more times until MANUAL is
displayed.
One or more times until AUTO is displayed.
Automatically
5
b Press the Tuning
between 1 and 15.
c Press the Program button to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program numeric.
You can also use Program/Set button on the remote control
to instead Program button in step 8.
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively.
or
Press the Tuning
or
button on the remote control.
ey
ric K Reset
me
ter
Nu Coun
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
2,3
k
ec
5
1
5
5
Pr
io
ex
t
ev
s
u
N
Tuning Mode
4
Dolby Surround
0
EQ
Cancel/Clear
MO/ST
DVD-OK/DVD/TUNER
Down
4
Tuning
7
Up
Enter
5
27
5
P
Du
bb
in
s
N
u
Selec
t
ey
ric K Reset
me
ter
Nu Coun
D
So
ng
ode
8
io
6
eM
ev
Select the FM stereo or mono mode by pressing MO/ST button.
Selec
t
R e v er s
1/2
Pr
7
Adjust the volume by:
Turning the Volume + or – knob on the front panel.
or
Pressing the Volume + or – buttons on the remote control.
k
ec
g
D
To scroll through the frequencies faster when searching
manually, hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
buttons to assign a program numeric
t
4
Otherwise:
ex
1
2
3
If you do not want to store the radio station found, revert to Step 4
and search for another station.
8
8
P
Tuning Mode
In Tuner mode
In manual tuning mode, you can use Multi Jog or
/
buttons to manual search a radio station.
During Tuner auto searching, press Stop( ) button to stop auto
searching.
In Preset tuning mode, you can use Multi Jog or
buttons to search a stored radio station.
/
Selecting a Stored Station
Improving Radio Reception
GB
You can improve the quality of radio reception by:
Testing the positions of the FM and AM(MW)/LW aerials before fixing
them permanently.
You can listen to a stored radio station as follows:
1
2
3
Switch the system on by pressing Standby/On button.
Select the TUNER function by pressing TUNER Band button on remote
control.
Select the required frequency band by pressing TUNER Band button
on the remote control or TUNER Band button again on the front
panel.
4
Press the Tuning Mode button on the front panel of the unit until
“PRESET” is displayed.
5
Turning Multi jog knob on the front panel left or right until the desired
station is found or press the
/
button to select the desired station.
or
Select the desired station by pressing the station numeric stored,
using the Tuning
or
button on the remote control.
Result: The desired station is now received.
If reception from a specific FM radio station is poor, press the MO/ST
button to switch from stereo mode to mono. The quality of the sound
will be improved.
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
SET
MO/ST
DVD-OK/DVD/TUNER
Down
Tuning
Up
Enter
Dolby Surround
0
EQ
Cancel/Clear
MO/ST
1
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
4
5
SET
5
Down
MO/ST
5
DVD-OK/DVD/TUNER
Up
Tuning
5
DVD-OK/DVD/TUNER
Down
Up
Tuning
Enter
Enter
+
+
Volume
TAPE
2,3
Volume
TAPE
Tuner
Band
Sound Edit
SPK Edit
Test Tone
Male/Female
Step
Sleep
Melody
ey
ric K Reset
me
ter
Nu Coun
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
5
5
5
P
Pr
t
ev
io
ex
1
k
ec
g
2,3
D
s
u
N
Tuning Mode
4
28
Listening to a Cassette
Recording a Compact Disc
GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio
Cassettes” on page 35.
1
2
Select the TAPE function by pressing TAPE button on the front
panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where Push Eject ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter numeric.
6
If you have inserted two cassettes, press the Deck 1/2 button on
the front panel to select the cassette to be played.
8
To listen to...
Press ...
Side A
TAPE (
) once
Side B
TAPE (
) twice
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
as required.
To...
Rewind the cassette
Fast-forward the cassette
1
Switch your system on by pressing Standby/On button.
2
Insert a blank cassette in Deck 2.
3
Select the DVD/CD function by pressing DVD/DVD-OK(
on the front panel.
4
Load the compact disc.
5
Select the required disc.
6
Select the required track on the compact disc and press the DVD/DVD-OK(
)
button on the front panel or Play/Pause(
) button on the remote control to
set the compact disc player to Pause mode.
7
Press the REC/Pause.
Result: REC is displayed.
8
Press the DVD/DVD-OK(
) to start playing the track.
Result: The track is recorded on the cassette.
9
To stop recording, press the Stop( ) button.
Press ...
(
)
(
)
ey
ric K Reset
me
ter
Nu Coun
7
Cancel this function, press the Stop ( ) button.
D
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
3,6,8
1
P
Pr
9
io
ex
t
ev
s
u
N
Tuning Mode
ey
ric K Reset
me
ter
Nu Coun
ey
ric K Reset
me
ter
Nu Coun
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
6
2,7
P
Pr
1
io
ex
t
ev
s
N
u
8
Tuning Mode
9
29
) button
g
9
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
Switch the system on by pressing the Standby/On button.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
The direct recording mode enables you to start recording with
any track on the compact disc.
8
Selec
t
R e v er s
eM
So
ng
ode
Recording a Radio Program
Selecting the Cassette Playback
Mode
GB
You can record a radio program of your choice.
Your Mini Component System has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect
on the recording.
Switch the system on by pressing Standby/On button.
When the display indicates...
The Mini Component System plays back...
Insert a blank cassette in Deck 2.
One side of the selected cassette and
then stops.
Select the TUNER function by pressing TUNER Band button.
One side of the cassette.
The other side of the cassette and then
stops.
Select the radio station that you wish to record by pressing Tuning
on the remote control or by press the Tuning Mode or
on the front panel.
5
Press the REC/Pause button.
Result: REC is displayed in red and recording starts.
6
To stop recording, press the Stop( ) button.
Both sides of the cassette indefinitely until
you press stop.
ey
ric K Reset
me
ter
Nu Coun
Selec
t
ey
ric K Reset
me
ter
Nu Coun
5
R e v er s
eM
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
So
ng
ode
P
Du
bb
in
1/2
g
D
k
ec
k
ec
g
D
Pr
3
ev
t
or
io
ex
1
2
3
4
Press the Reverse Mode button the appropriate symbol is displayed.
s
u
N
Tuning Mode
1
P
io
ex
ev
t
6
Pr
4
s
u
N
Tuning Mode
4
Copying a Cassette (Dubbing)
You can copy a cassette from Deck 1 to Deck 2.
Normal speed dubbing
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
1
2
3
4
Switch your system on by pressing Standby/On button.
Insert a blank cassette in Deck 2.
Tape Counter
When playing a cassette in one of the cassette decks, a
counter is displayed to enable you to take note of the counter
value at the start of each track to start playback at the
beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take note of
the counter values at the beginning of each track, reset the counter by
pressing Counter Reset button.
Each cassette deck has a separate counter.
Insert the tape to be copied in Deck 1.
Press...
Normal speed
Dubbing
ey
ric K Reset
me
ter
Nu Coun
D
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
To copy a cassette at...
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
P
Pr
To stop dubbing,press the Stop( ) button.
io
ex
t
ev
s
N
u
Tuning Mode
ey
ric K Reset
me
ter
Nu Coun
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
4
P
5
Pr
ev
t
1
io
ex
5
s
u
N
Tuning Mode
30
Timer Function
GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If the timer switch on and off times are identical, the word ERROR is
displayed.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
ey
ric K Reset
me
ter
Nu Coun
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
D
Set the timer switch-on time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press the Enter button.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press the Enter button.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press the Enter button.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press the Enter button.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
Press
button to adjust the volume level and press the
Enter button.
Result: The source to be selected is displayed.
Turn the Multi Jog knob to select the source to be played when the
system switches on.
You must also...
TAPE (cassette)
Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio)
a Press the Enter button.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
t
Tuning Mode
3,4,5,6,7,8
To set the timer function
You may use Multi Jog or
5, 6, 7.
/
buttons to adjust in step 4,
Cancelling the Timer
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press Timer-On/Off...
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
ey
ric K Reset
me
ter
Nu Coun
D
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
Load one or more discs.
P
Press the Enter button to confirm the timer.
Pr
tk
ev
io
s
N
u
31
N
g
If you select...
ex
Press the Enter button.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
DVD/CD (compact disc)
8
9
P
s
ex
7
6
6
1,9
u
6
2
TIMER is displayed.
io
5
Press the Timer/Clock button until
ev
4
Switch the system on by pressing Standby/On button.
Pr
1
2
3
k
ec
g
4,5,7
Press the Standby/On button set the system to standby mode.
is displayed to the top right of the time, indicating that the
Result:
timer has been set. The system will switch on and off automatically at the required times.
Tuni
ng Mode
Mute Function
Power Surround Function
GB
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
1
2
Press the Mute button.
To switch the sound back on (at the same volume as before),
press the Mute button again or the Volume buttons.
Your Mini Component System is equipped with
the function of Power Surround.
The Power Surround replaces conventional stereo sound
with a wider and more true-to-life sound. It creates the
feeling of being right at the centre of the music and being
surrounded by total music sound.
Press P. SURROUND button on the front panel until the
required option is selected.
Result: Each time the P. SURROUND button is pressed,
“P,SURR” is selected or cancelled in this order.
1
2
3
Mute
4
5
6
Search Song
7
8
9
Program
ey
ric K Reset
me
ter
Nu Coun
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
SET
Dolby Surround
0
EQ
Cancel/Clear
MO/ST
P
Pr
ev
us
ex
t
io
N
Tuni
ng Mode
Selecting an Equalizer Preset
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to
Subwoofer Level Function
Press EQ button on the remote control until the required option is selected.
Each time the EQ button is pressed in sequence, the equalizer modes and
sounds mode “ PASS, POP, ROCK, CLASSIC, HALL, LIVE, CINEMA,
DISCO” are selected in this order.
Subwoofer function stresses low tones providing thudding
sound effects.
Equalizer mode
1
Press the Subwoofer Level button repeatedly to select
OFF
WOOFER 1
WOOFER 2
WOOFER 3
WOOFER 4
2
You can select the level of low tones you desire
PASS
POP
ROCK
CLASSIC
HALL
LIVE
CINEMA
DISCO
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
Balance suitable for hall
Balance suitable for live
Balance suitable for cinema
Balance suitable for disco
The corresponding indication in the display is preceded by a red arrow
(except for the normal balance Pass, for which nothing is displayed).
7
8
9
Program
Dolby Surround
0
EQ
Cancel/Clear
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
b
Menu
Title
Slow
Go To
Audio
Subtitle
Zoom
Return
Display
Setup
Angle
Subwoofer Level
SET
MO/ST
DVD-OK/DVD/TUNER
Down
Tuning
Up
32
Setting the System to Switch off
Automatically
Connecting Headphones
GB
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
1
Press the Sleep button.
Result: playback starts and the following indications are displayed:
2
Press the Sleep button one or more times to indicate how long the
system should continue playing before it switches off:
90 MIN
3
Connect the headphones to the Phones jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
ey
ric K Reset
me
ter
Nu Coun
D
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
At any time, you can:
Check the remaining time by pressing Sleep button.
Change the remaining time by repeating Steps 1 and 2.
You can connect a set of headphones to your Mini Component
System so that you can listen to music or radio programmers
without disturbing other people in the room. The earphones
must have a 3.5 ø jack or an appropriate adapter.
To cancel SLEEP function, press the Sleep button one or more times
until OFF is display.
P
Pr
io
ex
t
ev
s
u
N
Tuning Mode
Tuner
Band
Sound Edit
SPK Edit
Test Tone
Male/Female
Step
Sleep
Melody
Key Control
Hi-Light
Repeat
Tempo
Score
Fanfare
Slow
Go To
b
Menu
Title
Microphone Function
The microphone enables the user to mix in his or her
vocals to sing-along with the music.
Preparation
Plug the microphone with a 6.3mm mic jack into microphone terminal.
Turn the MIC Level knob to adjust the MIC volume.
The sound will be changed 2.1 channels from 5.1 channels
when plugging the microphone into MIC jack.
ey
ric K Reset
me
ter
Nu Coun
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
P
Pr
io
ex
t
ev
s
u
N
Tuning Mode
33
Cleaning Your Mini Component
System
Safety Precautions
GB
The following diagrams illustrate the precautions to be taken
when using or moving your Mini Component System.
To obtain the best possible results from your Mini Component
System, you must clean the following elements regularly:
The outer casing
The disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
ey
ric K Reset
me
ter
Nu Coun
Selec
t
R e v er s
eM
ey
ric K Reset
me
ter
Nu Coun
So
ng
ode
Du
bb
in
1/2
D
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
g
k
ec
g
D
P
Pr
P
io
ex
t
ev
s
N
io
ex
t
ev
u
Pr
s
u
N
Tuning Mode
Tuning Mode
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
Disc Player
1
Before playing a disc, clean it with a special CD cleaning agent.
Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
ey
ric K Reset
me
ter
Nu Coun
ey
ric K Reset
me
ter
N u C o un
k
ec
Selec
t
R e v er s
eM
Selec
t
R e v er s
eM
1
2
So
ng
ode
Du
bb
in
1/2
So
ng
ode
Du
bb
in
1/2
g
D
k
ec
g
D
P
Pr
io
ex
t
ev
s
N
u
P
Tuning Mode
Pr
io
ex
t
ev
s
u
N
Tuning Mode
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Press Push Eject(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
VOLUME
UP
1
2
DOWN
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
ey
ric K Reset
me
ter
Nu Coun
k
ec
Selec
t
R e v er s
eM
So
ng
ode
Du
bb
in
1/2
g
D
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
P
Pr
io
ex
t
ev
s
u
N
Tuning Mode
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
34
Before Contacting the After-Sales
Service
Precautions When Using Discs
GB
Handle your discs with care. Always hold them by the edges to
avoid leaving fingerprints on the shiny surface.
When you have finished playing a disc, always put it back in its
case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your discs in a clean place, out of direct sunlight, where they
will not be exposed to high temperatures.
Refer to the chart below when this unit does not function properly. If the
problem you are experiencing is not listed below or if the instruction below
does not help, turn off the unit, disconnect the power cord, and contact the
nearest authorized dealer or Samsung Electronics Service Center.
Problem
G
E
N
E
R
A
L
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, simply cover the opening with
adhesive tape.
When you have finished playing a cassette, always put it back in its
case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
There is no sound
• The volume has been completely turned
down.
• The correct function (TUNER, DVD/DVDOK, TAPE, AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
• The MUTE button has been pressed.
The Timer does not work
• The timer has been stopped by pressing
Timer On/Off.
In case it does not work, even the
action is taken as above.
• Press the P. SURROUND button for 5 seconds in power ‘OFF’(standby), then it is
returned the original position (RESET)
D
V
D
/
C
D
R
A
D
I
O
35
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
• The remote control batteries need replacing
or the polarity has not been respected.
• The Standby/On button has not been
pressed.
The disc player does not start
playing
C
A
S
S
E
T
T
E
S
Checks/Explanation
The system does not work
• The DVD/DVD-OK function has not been
selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
When playing a DTS, DVD disc,
no sound is produced.
• Since this product incorporates technology,
no sound will be output directly from the
main unit.
• To listen to DTS sound, connect an amplifier
equipped with a DTS decoder to the digital
output (OPTICAL OUT).
The tape does not start playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Reception is poor or no radio stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio
waves; you must use an outside aerial.
Technical Specifications
GB
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
RADIO
AM(MW)
Tuning range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
LW
Tuning range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
FM
Tuning range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
522 - 1611KHz
40 dB
54 dB
2%
144 - 290KHz
40 dB
60 dB
2%
65.0 ~ 74.0MHz / 87.5 ~ 108.0MHz
62 dB
10 dB
0.3 %
DISC PLAYER
Capacity
Frequency range
Signal/noise ratio
Distortion
Channel separation
Disc sizes
3 discs
20 Hz - 20 KHz (± 1 dB)
90 dB (at 1 KHz) with filter
0.05 % (at 1 KHz)
74 dB
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
Signal/noise ratio
Channel separation
Erasing effect
125 Hz ~ 12 KHz
40 dB
35 dB
60 dB
AMPLIFIER
Output power
front speakers(4 Ω)
40 Watts/CH RMS,IEC (total harmonic distortion: 10 %)
subwoofer speakers(6 Ω)
80 Watts/CH RMS,IEC (total harmonic distortion: 10 %)
center,rear(L,R) speakers(6 Ω)
Channel separation
Signal/noise ratio
3 x 30 Watts RMS,IEC (total harmonic distortion: 10 %)
50 dB
75 dB
GENERAL
Dimensions
270 (W) x 332 (H) x 476 (D) mm
36
Reference
Note on Terminology
ANGLE
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.). With
such discs, the Angle button can be used to change the angle of view for specific scenes.
CHAPTER
NUMBER
These numbers are recorded on DVD discs. A Title is subdivided into many sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been recorded by means of digital
signals. Incorporating a new video compression technology (MPEG-2) and high-density recording technology,
a DVD disc comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number. If the
region number on the DVD disc does not correspond to the region number of
the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up
to 32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or
more movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
VIDEO CD
Contains recordings of pictures and sound whose quality is roughly comparable to that of video tape.
This player also supports video CDs with playback control (version 2.0).
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as laser discs, DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality, dynamic range, and directionality than the traditional Dolby surround technology, you can enjoy the dynamic realistic sound.
PRO LOGIC
37
A 4 channel analog sound reproduced from a program source such as a videoPRO LOGIC mark. You can enjoy a more realistic, robust
tape or LD with the
sound unavailable from regular stereo sources.
MEMO
38
THIS APPLIANCE IS MANUFACTURED BY:
AH68-01395A
Download PDF

advertising