advertisement
E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at www.samsung.com/register
Model _____________ Serial No. _____________
Contents
Channel
• Using the INFO button (Now & Next guide) 1
Basic Features
• Changing the Preset Picture Mode
• Changing the Picture Options
• Changing the Preset Sound Mode
Preference Features
Advanced Features
• My Contents - Additional Functions
Other Information
❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video settings.
The Now & Next guide shows daily TV program information for each channel according to the broadcasting time.
●
Scroll ◄, ► to view information for a desired program while watching the current channel.
r
A
•
The displayed image may differ depending on the model.
▶
English
❑ Using Channel menu
Press the CONTENT button to select Watch TV , then select the desired menu.
Each screen will be displayed.
◀
■ Guide
The EPG (Electronic Program Guide) information is provided by broadcasters.
Using program schedules provided by broadcasters, you can specify programs you want to watch in advance so that the channel automatically changes to the selected program channel at the specified time. Program entries may appear blank or out of date depending on a channel status.
Watch TV
My Contents
Guide
Schedule Manager
Channel List
Channel Manager
Source
•
The displayed image may differ depending on the model.
▶ ◀
English English
English
▶ ◀
Using Guide
Guide
08.1 Rede TV!HD
Channel View - All
Today
05.1 Globo HD
05.1 Globo HD
▼ 08.1 Rede TV!HD
Wed, 6 Oct 10:54 pm
DTV Air 08.1 Rede TV!HD
Home and Away
9:48 pm - 12:05 am
ATLÉTICO MG X CORINTHIANS(HD)
12:00 am
JORNAL DA GLOBAL
No Information
Home and...
12:30 am
Tine Team
No Information
1:00 am
Fiv...
1:30 am
Dark Angel
C A
Schedule Mgr
A B
1
C
2 3
D D
Exit ; Information k Page E Schedule
5 6 7
•
The displayed image may differ depending on the model.
4
English
▶
C A
◀
1 C A
Red ( Schedule Mgr ): Moves to the Schedule List in Schedule Manager .
C 2 A B
Green ( -2 Hours ): Viewing the list of programs to be broadcasted before 2 hours.
B
3
4
C
Yellow ( +2 Hours ): Viewing the list of programs to be broadcasted after 2 hours.
D
Blue ( Exit ): Exits the guide.
5 ; ( Information ): Displays details of the selected program.
6 k ( Page ): Move to previous or next page.
7 E ( Watch / Schedule )
●
When selecting the current program, you can watch the selected program.
● When selecting the future program, you can reserve to watch the selected program. To cancel the schedule, press the ENTERE button again and select
Cancel Schedules.
▶ ◀
English English
English
▶ ◀
■ Schedule Manager
Cancel or set the Timer Viewing to display the channel you want at the intended time.
Using Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
1. Press the ENTERE button to add manual booking.
2. Press the ◄/►/▲/▼ button to set the Antenna , Channel , Repeat , Date ,
Start Time .
● Antenna : Select the desired broadcasting signal.
● Channel : Select the desired channel.
▶
English
◀
● Repeat : Select Once , Manual , Sat~Sun , Mon~Fri or Everyday to set at your convenience. If you select Manual , you can set the day you want.
N The (c) mark indicates the day you’ve selected.
● Date : You can set the desired date.
N It is available when you select Once in Repeat .
● Start Time : You can set the start time you want.
N If you want to edit or cancel the schedule, select the reserved schedule on the Schedule List , and select the Edit or Cancel Schedules .
▶ ◀
English English
English
▶ ◀
■ Channel List
You can view channel information, Added Channels or Favorites 1 5 .
N When you press the CH LIST button on the remote control, Channel List screen will be displayed at once.
● Added Channels : Shows all added channels.
Channel List
Added Channels
● Favorites 1 5 : Shows all favorite channels.
N Favorites 1
Favorites .
5 will be displayed when you set Add to
02
04.1
a 05
07.1
09.1
11.1
a 13 a 14
Air
Air
TV#4
Air
TV#7
TV#9
TV#11
Air
Air
C A Antenna C Program View L CH Mode E Watch k Page
N If you want to view favorite channels you added, press the
• The displayed image may differ depending on the model.
CH LIST button and use L ( CH Mode ) button to move Favorites 1 5 .
▶
English
◀
N Using the color buttons with the Channel List .
●
C A Red ( Antenna ): Switches to Air or Cable .
●
C A Program View / Channel View ):
Displays the program when digital channel is selected. Returns to the channel view.
● L ( CH Mode / Channel ): Move to the Favorites 1 5 when Add to
Favorites is set. / Change channels.
N When you press the
C
(
A
) button, you can move to other channels using L ( Channel ) button.
● E ( Watch / Information ): Press to watch the channel you selected. /
Displays details of the selected program.
● k ( Page ): Move to next or previous page.
▶ ◀
English English
English
▶ ◀
Channel Status Display Icons
Icon a
)
\
An analog channel.
A reserved program.
A locked channel.
Operations
English
▶
How to use Timer Viewing in Channel List (digital channels only)
When you set the Timer Viewing in Channel List , you can only set the program in
Program View .
◀
1. Press the CH LIST button, then select a desired digital channel.
2. Press the
C
(
A
) button.
3. Press the ▲ / ▼ buttons to select the desired program, then press the
ENTERE ( Information ) or INFO button.
4. Select Timer Viewing , then press the ENTERE button when done.
N If you want to cancel Timer Viewing , follow steps 1 through 3. Select Cancel
Schedules .
▶ ◀
English English
English
▶ ◀
■ Channel Manager
You can edit the channel to your preference.
C
● ( ) Added Ch.
: Shows all added channels.
● ( ) All Channels : Shows all currently available channels.
Channel Manager
Added Ch.
● ( ) Favorites 1 channels.
5 : Shows favorite a 3 ---- Air a 4 ---- Air a 5 ---- Air
6.1 TV #6
7.1 TV #7
Selected items: 4 a 11 ---- Air
11.1 TV #11 a 12 ---- Air a 13 ---- Air
14.1 TV #14
Channel Number
N Using the color buttons with the
Channel Manager .
●
C A Red ( Antenna ): Switches to
Air or Cable .
A B
● a 8 ---- Air
9.1 TV #9 a 10 ---- Air a 15 ---- Air a 16 ---- Air a 17 ---- Air
Air C A Antenna D A B D Sorting k Page E Select T Tools R Return
•
The displayed image may differ depending on the model.
D Blue ( Sorting ): Changes the list ordered by channel number or channel name.
▶
English
Channel Status Display Icons
Icon a c
F
\
T
Operations
An analog channel.
A channel selected.
A channel set as a favorite.
A locked channel.
Displays the Channel Manager option menu.
◀
Channel Manager Option Menu t
Set each channel using the Channel Manager menu options ( Watch , Add to
Favorites /Edit Favorites , Lock/Unlock , Channel Name Edit , Add/Delete ,
Deselect All , Select All ). Option menu items may differ depending on the channel status.
▶ ◀
English English
English
▶ ◀
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
● Watch : Watch the selected channel.
● Add to Favorites / Edit Favorites : Set channels you watch frequently as favorites.
/ Add or Delete the selected channel in Favorites 1-5 .
1. Select the Add to Favorites / Edit Favorites , then press the ENTERE button.
N If the channel is already added to favorite channel, Edit Favorites will be shown.
▶
2. Press the ENTERE button to select Favorites 1 5 , then press the OK button.
N One favorite channel can be added in several of favorites among
Favorites 1 5 .
English
◀
● Lock / Unlock : Lock a channel so that the channel cannot be selected and viewed.
N NOTE
● This function is available only when the Channel Lock is set to On .
● The PIN input screen appears. Enter your 4-digit PIN, the default of which is “0-0-0-0”. Change the PIN using the Change PIN option.
● Channel Name Edit (analog channels only): Assign your own channel name.
▶ ◀
English English
English
▶
● Add / Delete : Delete or add a channel to display the channels you want.
N NOTE
● All deleted channels will be shown on the All Channels menu.
● A gray-colored channel indicates the channel has been deleted.
● The Add menu only appears for deleted channels.
● Deselect All : Deselect all the selected channels.
◀
N You can only select Deselect All when one or more channels are selected.
● Select All : Select all the channels in the channel list.
▶
English
◀
❑ Memorizing channels
O MENUm → Channel → ENTERE
■ Antenna (Air / Cable) t
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a
Cable system).
▶ ◀
English English
English
▶ ◀
■ Auto Program
Scans for a channel automatically and stores in the TV.
● Air : Air antenna signal.
● Cable : Cable antenna signal.
N NOTE
● Automatically allocated program numbers may not correspond to actual or desired program numbers. If a channel is locked, the PIN input window appears.
● If the antenna is connected to ANT 2 IN (CABLE), select Cable and if it is connected to ANT 1 IN (AIR), select Air .
● If both ANT 1 IN and ANT 2 IN are connected, select both Air and Cable .
How to Stop Auto Programming
▶
1. Press the ENTERE button.
2. A message will ask Stop Auto Program?
Select Yes by pressing the or button.
3. Press the ENTERE button.
English
◀
❑ Other Features
■ Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, fine tune the channel manually.
● Select Fine Tune in the Channel menu.
N Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the channel banner.
N To reset the fine-tuning, select Reset .
▶ ◀
English English
English
▶ ◀
■ Color System (Auto / PAL-M / PAL-N / NTSC)
Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal sources automatically. If the color implementation is unsatisfactory, select any of PAL-M , PAL-N or NTSC .
▶
English
❑ Changing the Preset Picture Mode
O MENUm → Picture → Picture Mode → ENTERE
◀
■ Picture Mode t
Select your preferred picture type.
N When connecting a PC, you can only make changes to the Entertain and
Standard .
● Dynamic : Suitable for a bright room.
● Standard : Suitable for a normal environment.
● Natural for 5 series : Suitable for an eye comfortable display.
● Movie : Suitable for watching movies in a dark room.
● Entertain : Suitable for watching movies and games.
N It is only available when connecting a PC.
▶ ◀
English English
English
▶ ◀
❑ Adjusting picture settings
■ Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality control.
N NOTE
● When you make changes to Backlight, Contrast, Brightness,
Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.
● Settings can be adjusted and stored for each external device connected to the TV.
● When connecting a PC, you can only make changes to Backlight ,
Contrast , Brightness and Sharpness .
● Lowering picture brightness reduces power consumption.
▶
English
◀
■ Screen Adjustment
Set the various picture options such as picture size and aspect ratio.
● Picture Size : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1 : Use for moderate magnification.
Zoom2 : Use for a stronger magnification.
Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
4:3 : Sets the picture to basic (4:3) mode.
▶
N Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention
(screen burn) which are not covered by the warranty.
◀
English English
English
▶ ◀
Screen Fit : Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are input.
Smart View1 for 5 series : Reduces original screen by 50%.
Smart View2 for 5 series : Reduces original screen by 25%.
N NOTE
● Smart View1 is enabled only in HDMI mode.
● Smart View2 is enabled only in DTV and HDMI modes.
▶
English
◀
● Position : Adjust the picture position. It is only available in Zoom1 , Zoom2 or
Wide Fit .
N After selecting Zoom1 , Zoom2 or Wide Fit , select Position . Follow the steps below in the Position screen.
1. Select the Position , press the ENTERE button.
2. Press the ▲ or ▼ button to move the picture up or down.
3. Press the ENTERE button.
▶ ◀
English English
English
▶ ◀
N After selecting Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) mode, you may need to center the picture. Select
Position , then follow the steps below in the Position screen.
1. Select the Position , press the ENTERE button.
2. Press the ▲, ▼, ◄ or ► button to move the picture.
3. Press the ENTERE button.
N If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
▶
English
◀
N HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
N Settings can be adjusted and stored for each external device you have connected to an input on the TV.
Input Source Picture Size
ATV 16:9, Zoom1, Zoom2, 4:3
Component (480i, 480p, 576i, 576p) 16:9, Zoom1, Zoom2, 4:3
DTV (720p, 1080i, 1080p)
Component (720p, 1080i, 1080p)
16:9, Wide Fit, 4:3, Screen Fit,
Smart View2
16:9, Wide Fit, 4:3, Screen Fit
HDMI (720p, 1080i, 1080p)
16:9, Wide Fit, 4:3, Screen Fit,
Smart View1, Smart View2
▶ ◀
English English
English
▶ ◀
❑ Changing the Picture Options
■ Advanced Settings
O MENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have more precise pictures.
N When connecting a PC, you can only make changes to Gamma and White
Balance .
● Black Tone (Off / Dark / Darker /
Darkest) : Select the black level to adjust the screen depth.
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
RGB Only Mode
Color Space
White Balance
Advanced Settings
: Off
: Medium
: 0
: 0
: Off
: Native
►
▼
U Move E Enter R Return
•
The displayed image may differ depending on the model.
▶
English
◀
● Dynamic Contrast (Off / Low / Medium / High) : Adjust the screen contrast.
● Shadow Detail : Increase the brightness of dark images.
● Gamma : Adjust the primary color intensity.
● RGB Only Mode (Off / Red / Green / Blue) : Display the Red, Green and
Blue color for making fine adjustments to the hue and saturation.
● Color Space (Auto / Native) : Adjust the range of colors available to create the image.
▶ ◀
English English
English
▶ ◀
● White Balance : Adjust the color temperature for a more natural picture.
R-Offset / G-Offset / B-Offset : Adjust each color’s (red, green, blue) darkness.
R-Gain / G-Gain / B-Gain : Adjust each color’s (red, green, blue) brightness.
Reset : Reset the White Balance to its default settings.
● Flesh Tone : Emphasize pink “Flesh Tone”.
● Edge Enhancement (Off / On) : Emphasize object boundaries.
● Motion Lighting (Off / On) : Reduce power consumption by brightness control adapted motion.
● LED Motion Plus (Off / On) for LED 5 series 40 inches : Remove drag from fast scenes with a lot of movement to provide a clear picture.
▶
English
◀
■ Picture Options
O MENUm → Picture → Picture Options → ENTERE
N When connecting a PC, you can only make changes to the Color Tone .
● Color Tone (Cool / Standard /
Warm1 / Warm2)
N Warm1 or Warm2 will be deactivated when the picture mode is Dynamic .
Color Tone
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
Picture Options
: Standard
: Auto
: Auto
: Normal
: Off
N Settings can be adjusted and stored for each external device connected to an input on the TV.
►
U Move E Enter R Return
•
The displayed image may differ depending on the model.
▶ ◀
English English
English
▶ ◀
● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualization) :
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.
N When the signal is weak, try other options until the best picture is displayed.
Auto Visualization : When changing analog channels, displays signal strength.
N Only available for analog channels.
N When bar is green, you are receiving the best possible signal.
● MPEG Noise Filter (Off / Low / Medium / High / Auto) : Reduces MPEG noise to provide an improved picture quality.
▶
English
◀
● HDMI Black Level (Low / Normal) : Selects the black level on the screen to adjust the screen depth.
N Available only in HDMI mode (RGB signals).
● Film Mode (Off / Auto1 / Auto2) : Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.
N Available in TV mode, COMPONENT (480i / 1080i) and HDMI (1080i).
▶ ◀
English English
English
▶ ◀
■ Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
English
▶
❑ Changing the Preset Sound Mode
O MENUm → Sound → Sound Mode → ENTERE
◀
■ Sound Mode t
● Standard : Selects the normal sound mode.
● Music : Emphasizes music over voices.
● Movie : Provides the best sound for movies.
● Clear Voice : Emphasizes voices over other sounds.
● Amplify : Increases the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
▶ ◀
English English
English
▶
❑ Adjusting Sound Settings
O MENUm → Sound → Sound Effect → ENTERE
◀
■ Sound Effect
(standard sound mode only)
Use the up and down arrow keys to select an option, and then press ENTERE.
● SRS TruSurround HD (Off / On) t
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer
Function) technology.
● SRS TruDialog (Off / On)
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be heard more clearly.
▶
English
◀
● Equalizer
Use Equalizer to customize sound setting for each speaker.
Balance : Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
Reset : Resets the equalizer to its default settings.
▶ ◀
English English
English
▶ ◀
■ Broadcast Audio Options
● Audio Language t
(digital channels only)
Change the default value for audio languages.
N The available language may differ depending on the broadcast.
▶
English
◀
● Multi-Track Sound (MTS) t
(analog channels only)
Mono : Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo : Choose for channels that are broadcasting in stereo.
SAP : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
N Depending on the particular program being broadcast, you can listen to
Mono, Stereo or SAP .
▶ ◀
English English
English
▶ ◀
■ Speaker Settings
● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal .
Night : This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
N To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied.
▶
English
◀
■ Reset Sound (OK / Cancel)
Resets your current sound mode to its default settings.
English
▶ ◀
English
English
▶
❑ Setting the Time
O MENUm → System → Time → ENTERE
◀
■ Time
N The current time will appear every time you press the INFO button.
● Clock : Setting the clock is for using various timer features of the TV.
N If you disconnect the power cord, you have to set the clock again.
Clock Mode : Set up the current time manually or automatically.
- Auto : Set the current time automatically using the time from a digital channel.
N The antenna must be connected in order to set the time automatically.
▶
English
◀
- Manual : Set the current time manually.
N Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.
Clock Set : Set the Day , Month , Year , Hour , Minute and am/pm .
N Available only when Clock Mode is set to Manual.
N You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Time Zone : Select your time zone.
N This function is only available when the Clock Mode is set to Auto .
▶ ◀
English English
English
▶ ◀
❑ Using the Sleep Timer
O MENUm → System → Time → Sleep Timer → ENTERE
● Sleep Timer t: Automatically shuts off the TV after a preset period of time.
(30, 60, 90, 120, 150 and 180 minutes).
N To cancel the Sleep Timer , select Off .
▶
English
◀
❑ Setting the On/Off Timer
O MENUm → System → Time → On Timer <or> Off Timer → ENTERE
● On Timer : Three different on timer settings can be made. You must set the clock first.
On Timer 1
Setup
Setup : Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select
Manual , you can set up the day you want to activate the timer.
Once
On Time
04
Source
TV
Sun Mon Tue Wed Thu Fri Sat
00
Antenna
Cable am
Channel
3
Volume
20
N The c mark indicates the day you’ve selected.
On Time : Set the hour and minute, am/pm.
Volume : Set the desired volume level.
U Adjust L Move E Enter R Return
•
The displayed image may differ depending on the model.
▶ ◀
English English
English
▶ ◀
Source : Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the
TV)
Antenna (when the Source is set to TV ): Select Air or Cable .
Channel (when the Source is set to TV ): Select the desired channel.
Music / Photo (when the Source is set to USB ): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically.
N If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly.
▶
N When there is only one photo file in the USB, the Slide Show will not play.
N If a folder name is too long, the folder cannot be selected.
N Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.
English
◀
N It is recommended that you use a USB memory stick and a multi card reader when using On Timer .
N The On Timer function may not work with USB devices with a built-in battery,
MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized.
● Off Timer : Three different off timer settings can be made. You must set the clock first.
Off Timer 1
Setup
Sun Mon Tue Wed Thu Fri Sat
Setup : Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select
Manual, you can set up the day you want to activate the timer.
Once
Off Time
04 00 am
▶
N The c mark indicates the day the day you’ve selected.
Off Time : Set the hour and minute, am/ pm.
L Move U Adjust E Enter R Return
•
The displayed image may differ depending on the model.
◀
English English
English
▶
❑ Locking Programs
O MENUm → System → Security → ENTERE
◀
■ Security
N The PIN input screen appears before the setup screen.
N Enter your 4-digit PIN, the default of which is 0-0-0-0. Change the PIN using the Change PIN option.
● Channel Lock (Off / On) : Lock channels in Channel Manager , to prevent unauthorized users, such as children, from watching unsuitable program.
● Program Rating Lock : Prevent unauthorized users, such as children, from watching unsuitable program with a user defined 4-digit PIN code.
N The items of Program Rating Lock differs depending on the country.
▶
English
◀
● Change PIN : The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in the Enter New PIN . Re-enter the same 4 digits in the
Confirm New PIN . When the Confirm screen appears, press the OK button.
Your PIN has been memorized.
N If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0” :
POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)
▶ ◀
English English
English
▶
❑ Picture In Picture (PIP)
O MENUm → System → PIP → ENTERE
◀
■ PIP t
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
N NOTE
● For PIP sound, refer to the Sound Select instructions.
● If you turn the TV off while watching in PIP mode, the PIP window will disappear.
● You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.
▶
English
◀
● PIP Settings
Main picture
Component, HDMI
Sub picture
TV
● PIP (Off / On) : Activate or deactivate the PIP function.
● Air/Cable (Air / Cable) : Select either Air or Cable as the input source for the sub-screen.
● Channel : Select the channel for the sub-screen.
● Size (Õ / Ã): Select a size for the sub-picture.
● Position (à / – / — / œ): Select a position for the sub-picture.
● Sound Select (Main / Sub) : You can choose the desired sound ( Main or Sub ) in PIP mode.
▶ ◀
English English
English
▶ ◀
❑ Economical Solutions
■ Eco Solution
● Energy Saving (Off / Low / Medium / High / Picture Off) t: This adjust the brightness of the TV in order to reduce power consumption. If you select Picture Off , the screen is turned off, but the sound remains on. Press any button except volume button to turn on the screen.
● Eco Sensor (Off / On) for 5 series 40 inches : To enhance your power savings; the picture settings will automatically adapt to the light in the room.
N If you adjust the Backlight, the Eco Sensor will be set to Off .
Min Backlight : When ECO sensor is On , the minimum screen brightness can be adjusted manually.
N If Eco Sensor is On , the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.
▶
English
◀
● No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) : Sets how quickly the TV switches to standby mode, if no picture is being received.
● Auto Power Off (Off / On) : The TV will be automatically turned off when no user operation is received for 4 hours.
▶ ◀
English English
English
▶
❑ Other Features
O MENUm → System → ENTERE
◀
■ Menu Language
Set the menu language.
1. Select Menu Language and press the ENTERE button.
2. Choose desired language and press the ENTERE button.
N Choose between English , Português and Español .
▶
English
◀
■ Caption
(On-Screen Text Messages)
● Caption (Off / On) : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
N Caption feature is not available when connecting the PC or Component,
HDMI mode.
● Caption Mode : You can select the desired caption mode.
N The availability of captions depends on the program being broadcasted.
CC1~CC4 / Text1~Text4 : (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the
Analog Caption function may or may not work with digital channels.)
▶ ◀
English English
English
▶ ◀
■ Auto Protection Time
● Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 hours) : If the screen remains idle with a still image for a certain period of time defined by the user, the screen saver is activated to prevent the formation of ghost images on the screen.
▶
English
◀
■ General
● Game Mode (Off / On) : When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience selecting the game menu.
N NOTE
● Precautions and limitations for game mode
– To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
– If you display the TV menu in Game Mode , the screen shakes slightly.
▶ ◀
English English
English
▶ ◀
● Game Mode is not available when the input source is set to TV or
HDMI/DVI (connecting a PC).
● After connecting the game console, set Game Mode to On .
Unfortunately, you may notice reduced picture quality.
● If Game Mode is On :
– Picture Mode is set to Standard and Sound Mode is set to
Movie .
▶
English
◀
● Menu Transparency (Bright / Dark) : Set the Transparency of the menu.
● Boot Logo (Off / On) : Display Samsung logo when the TV is turned on.
● AV Color System (Auto / PAL-M / PAL-N / NTSC) : Normally the TV can receive image and sound with good quality when in the mode Auto . This mode detects the signal color system automatically. In case of some signal reception with color unsatisfactory, select the AV Color System Mode to
PAL-M, PAL-N or NTSC .
▶ ◀
English English
English
▶
❑ Support Menu
O MENUm → Support → e-Manual → ENTERE
◀
■ e-Manual
You can read the introduction and instructions about the TV features stored in your TV.
N For the detailed information about e-Manual Screen, refer to “How to use the e-Manual” in User Manual.
▶
English
◀
■ Self Diagnosis
● Picture Test (Yes / No) : Use to check for picture problems. If the problem continues to occur, check the Color pattern.
Yes : If the test picture does not appear or there is noise in the test pattern, select Yes . There may be a problem with the TV. Contact Samsung’s Call
Center for assistance.
No : If the test pattern is properly displayed, select No . There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
▶ ◀
English English
English
▶ ◀
● Sound Test (Yes / No) : Use the built-in melody sound to check for sound problems.
Yes : If you can hear sound only from one speaker or not at all during the sound test, select Yes . There may be a problem with the TV. Contact
Samsung’s Call Center for assistance.
No : If you can hear sound from the speakers, select No . There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.
▶
English
◀
● Signal Information : (digital channels only) An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.
● Troubleshooting : If the TV seems to have a problem, refer to this description.
N If none of these troubleshooting tips apply, contact the Samsung customer service center.
▶ ◀
English English
English
▶ ◀
■ Software Upgrade
Software Upgrade can be performed by downloading the latest firmware from
“www.samsung.com” to a USB memory device.
Current Version - the software already installed in the TV.
N Software is represented as ‘Year/
Month/Day_Version’.
Current Version
Software Upgrade
2011/01/18_000001
By USB
Alternative Software
Standby Mode Upgrade
----/--/--_-----
: Off
U Move E Enter R Return
•
The displayed image may differ depending on the model.
▶
English
◀
Installing the Latest Version
● By USB : Insert a USB drive containing the firmware upgrade file, downloaded from
TV Rear Panel www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the firmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We
* It may differ depending on the model.
advise you to write down your settings so that you can easily reset them after the upgrade.
● Alternative Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.
▶ ◀
English English
English
▶ ◀
■ Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers, and how to download products and software.
▶
English
◀
❑ Using the My Contents
Enjoy photos, music files saved on a USB Mass Storage Class (MSC) device.
1. Press the CONTENT button to select My Contents .
2. Press ▲/▼ button to select desired menu ( Photos , Music ), then press the ENTERE button.
My Contents
Photos
Music
Source Watch TV
•
The displayed image may differ depending on the model.
▶ ◀
English English
English
▶ ◀
❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo and music files to the USB jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select Connected Device .
TV Rear Panel
* It may differ depending on the model.
▶
English
◀
N It might not work properly with unlicensed multimedia files.
N Need-to-Know List before using My Contents
● MTP (Media Transfer Protocol) is not supported.
● The file system supports FAT16, FAT32 and NTFS.
● Certain types of USB Digital camera may not be compatible with this TV.
● My Contents only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not supported). Devices should be connected directly to the TV’s USB port.
● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
▶ ◀
English English
English
▶ ◀
● Do not disconnect the USB device while it is loading.
● The higher the resolution of the image, the longer it takes to display on the screen.
● The maximum supported JPEG resolution is 15360X8640 pixels.
● For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
● If the files are sorted by Folder View , up to 1000 files can be displayed in each folder.
▶
English
◀
● MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a technology that supports the creation, distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
● If more than 2 devices are connected, you can only use one at a time.
● If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high power (more than 500mA or 5V) may not be supported.
● If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or may malfunction.
▶ ◀
English English
English
▶ ◀
● If the tv has no input during time set in Auto Protection Time , the
Screensaver will run.
● The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
● If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
● If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is not played, connect the USB device to the PC, format the device and check the connection.
● My Contents only supports sequential jpeg format.
● If the number of files and folders saved on a USB storage device is approximately over 4000, the files and folders may not appear and some folders may not be opened.
▶
English
◀
❑ Screen Display
Move to the desired file using the ◄/►/▲/▼ buttons and then press the
ENTERE. The file is played. My Contents screen may differ depending on the way to enter the screen.
Music 1/1 page
Folder View
Information:
You can ascertain the selected device name, contents mode, folder/ file name, page and sorting list.
File List Section:
You can confirm the files and groups that are sorted by category.
▶ ◀
Contents mode / Device name:
You can select the desired
Contents mode or Device name.
{ Edit Mode } Sorting T Tools R Return
Operation Buttons:
- { Yellow ( Edit Mode ): Selects the desired music. The check box is shown in the screen to check the music you want.
It is only available in Music.
- } Blue ( Sorting ): Selects the sort list.
- T Tools : Displays the option menu.
- R Return : Move to the previous step.
- E Select : Select the contents in Edit Mode .
English English
English
▶ ◀
■ Music
Playing Music
1. Press the ◄/►/▲/▼ button to select the desired Music in the file list.
Music
2. Press the ENTERE button.
N Only displays the files with MP3 file extension. Other file extensions are not displayed, even if they are saved on the same USB device.
E Play L Pages T Tools R Return
N If the sound is abnormal when playing MP3 files, adjust the Equalizer in the Sound menu. (An overmodulated MP3 file may cause a sound problem.)
▶
English
◀
Playing the selected music
1. Press the
C
(
A
) button.
2. Select the desired music.
N The check box appears to the left of the selected files.
3. Press the TOOLS button and select Play Selected Contents .
N You can select or deselect all music pressing the Select All/Deselect
All .
▶ ◀
English English
English
▶ ◀
■ Photos
Viewing a Photo (or Slide Show)
1. Press the ◄/►/▲/▼ button to select the desired photo in the file list.
Nomal
2. Press the ENTERE button.
● When a selected photo is displayed, press the
ENTERE button to start the slide show.
● During the slide show, all files in the file list will be displayed in order.
E Pause L Previous/Next T Tools R Return
N Music files can be automatically played during the Slide Show if the
Background Music is set to On .
▶
English
◀
❑ My Contents - Additional Functions
Music/Photos Play Option menu
During playing a file, press the TOOLS button.
Category Operation
Shuffle Mode You can play the music randomly.
Repeat Mode
Picture Mode
Sound Mode
You can play music files repeatedly.
You can adjust the picture setting.
You can adjust the sound setting.
Music c c c
Photos c c
▶ ◀
English English
English
▶ ◀
Category
Start Slide Show /
Pause Slide Show
Operation
You can start or pause a Slide Show.
Slide Show Speed
You can select the slide show speed during the slide show.
Background Music
You can turn background music on and off when watching a slide show.
Background Music You can select background music when
Setting watching a Slide Show.
Music Photos c c c c
▶
English
◀
Zoom
Category
Rotate
Information
Operation
You can zoom into images in full screen mode.
You can rotate images in full screen mode.
You can see detailed information about the played file.
Music c
Photos c c c
▶ ◀
English English
English
▶ ◀
❑ Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.com, then click on Support, or call Samsung customer service.
Issues Solutions and Explanations
Poor picture First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image.
● go to MENU - Support - Self Diagnosis - Picture
Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
▶
English
◀
Issues
The TV image does not look as good as it did in the store.
Solutions and Explanations
● If you have an analog Cable/Set top box, upgrade to a digital set top box. Use HDMI to deliver HD (high definition) picture quality.
● Cable/Satellite subscribers: Try HD stations from the channel line up.
● Air/Cable Antenna connection: Try HD stations after performing Auto program.
N Many HD channels are up scaled from
SD(Standard Definition) contents.
● Adjust the Cable/Set top box video output resolution to 1080i or 720p.
▶ ◀
English English
English
▶ ◀
Issues
The picture is distorted: macroblock error, small block, dots, pixelization.
Solutions and Explanations
● Compression of video contents may cause picture distortion, especially in fast moving pictures such as sports and action movies.
● Low signal level can cause picture distortion. This is not a TV problem.
● Mobile phones used close to the TV (up to 3.3 ft) may cause noise in picture on analog and digital TV.
▶
English
◀
Issues
There is poor color or brightness.
There is a dotted line on the edge of the screen.
The picture is black and white.
Solutions and Explanations
● Adjust the Picture options in the TV menu. (go to
Picture Mode / Color / Brightness / Sharpness )
● Adjust Energy Saving option in the TV menu (go to
MENU - System - Eco Solution - Energy Saving )
● Try resetting the picture to view the default picture setting. (go to MENU - Picture - Reset Picture )
● If the picture size is set to Screen Fit , change it to
16:9 .
● Change cable/Set top box resolution.
● If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input on the TV.
▶ ◀
English English
English
▶ ◀
Issues
When changing channels, the picture freezes or is distorted or delayed.
Sound Problem
Solutions and Explanations
● If connected to a cable box, please try to reset it.
(reconnect the AC cord and wait until the cable box reboots. It may take up to 20 minutes)
● Set output resolution of the cable box to 1080i or
720p.
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
● go to MENU - Support Self Diagnosis Sound
Test
If the audio is OK , the sound problem may caused by the source or signal.
▶
English
◀
Issues
There is no sound or the sound is too low at maximum volume.
The picture is good but there is no sound.
Solutions and Explanations
● Please check the volume of the device (Cable/Sat
Box, DVD, Blu-ray etc) connected to your TV.
● If you are using a DVI to HDMI cable, TV set not support audio.
● Reboot the connected device by reconnecting the device’s power cable.
▶ ◀
English English
English
▶ ◀
Issues
The speakers are making an inappropriate noise.
Solutions and Explanations
● For Antenna or Cable connections, check the signal information. Low signal level may cause sound distortion.
● Perform the Sound Test as explained above.
▶
English
◀
Issues
No Picture, No Video
The TV will not turn on.
Solutions and Explanations
● Make sure the AC power cord is securely plugged into the wall outlet and the TV.
● Make sure the wall outlet is working.
● Try pressing the POWER button on the TV to make sure the problem is not the remote control.
If the TV turns on, refer to ‘Remote control does not work’ below.
▶ ◀
English English
English
▶ ◀
Issues
The TV turns off automatically.
Solutions and Explanations
● Ensure the Sleep Timer is set to Off in the System menu.
● If your PC is connected to the TV, check your PC power settings.
● Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
● When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.
▶
English
◀
Issues
There is no picture/ video
Solutions and Explanations
● Check cable connections. (remove and reconnect all cables connected to the TV and external devices).
● Set your external device’s (Cable/Set top box, DVD,
Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
● Make sure your connected devices are powered on.
● Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
● Reboot the connected device by reconnecting the device’s power cable.
▶ ◀
English English
English
▶ ◀
Issues Solutions and Explanations
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
● Make sure the coaxial cable is connected securely.
● Please try Auto Program to add available channels to the channel list. go to MENU - Channel Auto
Program then select Auto and make sure the correct
Cable TV signal type is set in the menu.
● Verify the Antenna is positioned correctly.
No Caption on digital channels.
Check Caption System menu.
Some channels may not have caption data.
▶
English
◀
Issues
The picture is distorted: macroblock, error, small block, dots, pixelization.
Solutions and Explanations
● Compression of video contents may cause picture distortion. especially on fast moving pictures such as sports and action movies.
● A low signal can cause picture distortion. This is not a
TV problem.
Others
Purple/green rolling horizontal bars and buzzing noise from the TV speakers with Component cable connection.
● Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has a grounding issue. Replace the
Component video cables with an HDMI connection.
▶ ◀
English English
English
▶ ◀
Issues
The picture will not display in full screen.
The remote control does not work.
Solutions and Explanations
● HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
● Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV.
● Adjust picture size option on your external device or
TV to full screen.
● Replace the remote control batteries with correct polarity (+/–).
● Clean the transmission window located on the top of the remote control.
● Try pointing the remote control directly at the TV from
5~6 feet away.
▶
English
◀
Issues
The cable/set top box remote control does not turn the TV on or off, or adjust the volume.
Solutions and Explanations
● Program the Cable/Set top box remote control to the operate the TV. Refer to the Cable/Set top box user manual for SAMSUNG TV code.
A “ Mode Not
Supported ” message appears.
Caption on TV menu is greyed out.
There is a plastic smell from the TV.
● Check the supported resolution of the TV and adjust the external device’s output resolution accordingly.
Refer to resolution settings in this manual.
● Caption can not be selected in the TV menu when connected via HDMI or Component.
● Caption must be activated on the external device.
● This smell is normal and will dissipate over time.
▶ ◀
English English
English
▶ ◀
Issues
TV Signal
Information is unavailable in the
Self Diagnosis Test menu.
TV is tilted to the right or left side.
The Channel menu is grey out
(unavailable).
Solutions and Explanations
● This function is only available with digital channels from an Antenna / RF / Coax connection.
● Remove the stand base from the TV and reassemble it.
● The Channel menu is only available when the TV source is selected.
▶
English
◀
Issues
Your settings are lost after 30 minutes or every time the TV is turned off.
You have intermittent loss of audio or video.
Solutions and Explanations
● If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo mode to Home Use mode in the
Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → System → Plug
& Play → ENTERE.
● Check the cable connections and reconnect them.
● Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
▶ ◀
English English
English
▶ ◀
Issues
The PIP menu is not available.
You see small particles when you look closely at the edge of the frame of the TV.
Solutions and Explanations
● PIP functionality is only available when you are using a HDMI, HDMI/DVI or components source.
● This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears on the screen.
● Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
▶
English
◀
❑ Anti-theft Kensington Lock
(depending on the model)
The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use.
N Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.
N The position and color may differ depending on the model.
TV Rear
1
▶ ◀
Optional
English English
English
▶ ◀
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
N NOTE
● These are general instructions. For exact instructions, see the User manual supplied with the locking device.
● The locking device has to be purchased separately.
● The location of the Kensington slot may be different depending on the TV model.
▶
English
◀
❑ License
TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license from SRS
Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.
English
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement