GM Owner Manuals - Owner Center

GM Owner Manuals - Owner Center
2010 Cadillac STS Navigation System
Infotainment System ......... 3
Introduction
Overview
...................... 3
....................... 4
Radio
............................. 14
AM-FM Radio
............... 14
Satellite Radio
.............. 21
Audio Players
................
CD/DVD Player
............
MP3
...........................
Auxiliary Devices
..........
Navigation
23
23
30
33
...................... 34
Using the Navigation
System
.................. 34
Maps
..........................
Navigation Symbols
.......
Navigation Menu
...........
Destination
..................
OnStar® System
...........
Configure Menu
............
Global Positioning
System (GPS)
.........
Vehicle Positioning
........
Problems with Route
Guidance
................
If the System Needs
Service
..................
36
39
47
63
79
80
88
89
89
90
M
Ordering Map DVDs
...... 90
Database Coverage
Explanations
........... 90
Voice Recognition
Personalization
.......... 91
............. 101
Phone
.......................... 102
Bluetooth
................... 102
Index .................................... 1
Infotainment System
Introduction
GENERAL MOTORS, GM, the
GM Emblem, CADILLAC, the
CADILLAC Crest & Wreath, and
the name STS are registered
trademarks of General Motors LLC.
The information in this manual
supplements the owner manual.
DTS and DTS Digital surround are
registered trademarks of Digital
Theater systems, Inc.
Dolby® is manufactured under
license from Dolby® Laboratories.
Dolby®, MLP Lossless, and the
double-D symbol are trademarks of
Dolby® Laboratories.
Litho in U.S.A.
Part No. 20861105 A First Printing
3
©
This manual describes features that
may or may not be on your specific
vehicle either because they are
options that you did not purchase or
due to changes subsequent to the
printing of this owner manual. Please
refer to the purchase documentation
relating to your specific vehicle to
confirm each of the features found on
your vehicle. For vehicles first sold in
Canada, substitute the name
“General Motors of Canada Limited”
for Cadillac Motor Division wherever
it appears in this manual.
Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle is
sold, leave this manual in the
vehicle.
2009 General Motors. All Rights Reserved.
4
Infotainment System
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens)
A French language copy of this
manual can be obtained from your
dealer/retailer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l’adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de langue
française
www.helminc.com
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
The navigation system includes
navigation and audio functions.
While entering the vehicle or when
turning the vehicle off, some
DVD Map Disc noise is normal.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features intended
to help keep your eyes on the
road and mind on the drive. Some
features may be disabled while
driving. Note that these functions will
be grayed-out. A grayed-out
function indicates it is not available
when the vehicle is moving.
All functions are available when the
vehicle is parked. Do the following
before driving:
• Become familiar with the
navigation system operation, hard
keys on the faceplate, and
touch-sensitive screen buttons of
the navigation system.
• Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the speakers.
• Set up the navigation features
before beginning driving, such
as entering an address or a
preset destination.
• Set up your phone numbers in
advance so they can be called
easily with the press of a
single button or a single voice
command (for navigation systems
equipped with phone capability).
Infotainment System
{ WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{ WARNING
Avoid looking too long or too often
at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
Use the navigation system to:
• Plan a route.
• Select a destination using
various methods and choices.
• Follow turn-by-turn route and
map guidance with voice
prompts, only if permitted by
traffic laws, controls, and
conditions.
You should always be alert and
obey traffic and roadway laws and
instructions, regardless of the
guidance from the navigation
system. Because the navigation
system uses street map information
that does not include all traffic
restrictions or the latest road
changes, it may suggest using a
road that is now closed for
construction or a turn that is
prohibited by signs at the
intersection.
5
Because the system uses limited
information, you must always
evaluate whether following the
system’s directions is safe and legal
for the current conditions.
When the navigation system is
turned on, a screen may appear with
the information below, and you
must read and acknowledge
the information it contains.
{ WARNING
Taking your eyes off the road for
extended periods could cause a
crash resulting in injury or death
to you or others.
To help avoid a crash in which you
or others could be killed:
• Always concentrate on your
driving first by keeping your eyes
and mind on the road, and
your hands on the wheel.
6
Infotainment System
If OK is not selected, all hard keys
except for NAV (Navigation)
and DEST (Destination) can be
accessed. You can also press the
NAV hard key to have this Warning
screen appear.
• Follow system directions only if
permitted by traffic laws,
controls, and conditions.
• Before using this system, read
the owner’s manual and learn
how it operates.
When getting started, set the
navigation system to your
preference or delete information you
may have entered using various
options.
• Some system controls cannot be
used the when vehicle is moving.
After you acknowledge the start up
information you will be able to
access the NAV (navigation) and
DEST (destination) functions. Once
accessed, you can enter or
delete information in the navigation
system or access other functions.
See instructions later in this section.
Every fifty times the vehicle is
started and the navigation system is
turned on, the Warning screen
appears. After reading the warning,
select OK to load the map DVD
information.
Infotainment System
7
A. Audio Status Line
B. Audio Source Screen Button.
See AM-FM Radio on page 14
and Satellite Radio on page 21
for more information.
C. North Up/Heading Up Symbol.
See Navigation Symbols on
page 39 for more information.
D. No GPS Symbol. See Navigation
Symbols on page 39 for more
information.
E. Navigation Menu Symbol. See
Using the Navigation System
on page 34 for more information.
F. Map Scales. See “Map Scales”
under Maps on page 36 for
more information.
G. Guidance Window Symbol. See
Navigation Symbols on page 39
for more information.
Z (Map DVD Eject) Key. See
“Hard Keys” under Using the
Navigation System on page 34
for more information.
I. Map DVD Loading Slot.
H.
8
J.
Infotainment System
M (CD/DVD Changer Loading)
Key. See CD/DVD Player on
page 23 for more information.
Z (CD/DVD Changer Eject)
Key. See CD/DVD Player on
page 23 for more information.
L. CD/DVD Changer Loading Slot.
K.
M.
O n (Power/Volume)
Knob. See “Hard Keys”
under Using the Navigation
System on page 34 for more
information.
¦ m ¥ (Navigation Screen Tilt)
Key (in/out). See “Hard Keys”
under Using the Navigation
System on page 34 for more
information.
O. Clock. See “Clock” under
Configure Menu on page 80 for
more information.
N.
P. Memory Point Symbol. See
Navigation Symbols on page 39
for more information.
Q. POI Symbol (Point of Interest).
See Navigation Symbols on
page 39 for more information.
R. BAND key. See AM-FM Radio
on page 14 and Satellite Radio
on page 21 for more information.
S. AUX (Auxiliary) key. See “Hard
Keys” under Using the
Navigation System on page 34
for more information.
T. ROUTE key. See Destination on
page 63 for more information.
U.
V.
) (Map) Key. See “Hard Keys”
under Using the Navigation
System on page 34 for more
information.
w (Tune) Knob. See AM-FM
Radio on page 14 and Satellite
Radio on page 21 for more
information.
W. SRCE (Source) Key. See
AM-FM Radio on page 14
and Satellite Radio on page 21
for more information.
e (Audio) Key. See AM-FM
Radio on page 14 and Satellite
Radio on page 21 for more
information.
Y. CONFIG Key. See Configure
Menu on page 80 for more
information.
X.
Z.
k (Navigation Voice Prompt
Repeat) Key. See “Hard Keys”
under Using the Navigation
System on page 34 for more
information.
AA.
¦ t u ¥ (Seek/Scan) Key.
See AM-FM Radio on page 14
and Satellite Radio on
page 21 for more information.
Infotainment System
Deleting Personal Information
This navigation system can
record and store destinations. At
times, such as the disposal of your
vehicle, you may want to delete
these destinations. Refer to
the following sections to delete the
destination information that has
been stored.
5. Press and hold one of the six
preset screen buttons, at the
bottom of the screen, until a
beep is heard or see the station
displayed on the selected
preset button.
6. Repeat the steps for each
preset.
See “Memory Points” under
Navigation Menu on page 47 for
deleting stored destinations.
See “Preset Stations” under AM-FM
Radio on page 14 and Satellite
Radio on page 21 for more
information.
Storing Radio Station Presets
Setting the Clock
To set preset radio stations:
To set the time:
1. Press the power/volume knob to
turn the system on.
1. Press the power/volume knob to
turn the system on.
2. Press the BAND hard key.
2. Press the CONFIG hard key.
3. Select the desired band
(AM, FM1, FM2, XM1, or
XM2 (if equipped)).
3. Press the H (clock) screen
button.
4. Seek, scan, or tune to the
desired stations using the seek
and scan hard key arrows or
the tuning knob.
4. Select the 12hour or 24hour
screen button to display the
time in standard or military time.
9
5. Select the AM or PM screen
buttons.
6. Select the appropriate time zone
screen button.
7. Select the Daylight Saving Time
screen button, if necessary.
8. Press and hold the hour and
minute arrow buttons to
increase or to decrease the time
or press the GPS TIME screen
button to reset radio time to
GPS time.
The radio uses the GPS satellite to
set the time. The vehicle needs
to be in an open area to receive the
signal. See “Clock” under Configure
Menu on page 80 for more
information.
10
Infotainment System
Setting the Region, Entering
an Address and Point of
Interest, and Storing a Home
Destination and Preset
Destinations
Before entering an Address, Point
of Interest, Home, or Preset
Destination, select the appropriate
region that contains the final
destination. The vehicle must be
stopped to perform this operation.
Setting the Region
To set the region:
1. Press the power/volume knob to
turn the system on.
2. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 36 for more
information.
A notice may appear. Touch the
I agree screen button to
proceed.
3. Press the ROUTE hard key.
4. Press the Region screen button.
5. Select the appropriate region
numbered screen button that
contains the final destination.
The system returns to the
DESTINATION ENTRY screen. See
“Region” under Destination on
page 63 for more information.
Entering an Address
To set a destination by entering a
street address:
1. Press the power/volume knob to
turn the system on.
2. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 36 for more
information.
A notice may appear. Touch the
I agree screen button to
proceed.
3. Press the ROUTE hard key.
Verify that the selected Region is
correct.
4. Press the
button.
C Address screen
5. Enter the street name using the
alpha keypad on the screen.
Do not enter directional
information or street type, and
use the space symbol screen
button (U) between street or
city names. For example, the
street name N. Royal Oak
Rd. should be entered as
royalUoak. Use the
backspace (V) screen button if
an incorrect character has
been entered.
6. Select the desired street name
with the correct designation
(Dr., Ln., St., etc.) from the list.
7. If there is more than one city, the
system displays the list of cities
that have a street with that
name. Select a city from the list.
Infotainment System
8. Enter the house number using
the numeric keypad on the
screen and touch the OK screen
button.
A map screen appears with the
destination marked.
9. Select the h (destination)
symbol screen button.
10. Select the Guide screen button.
11. Once driving begins, an
audio prompt to “Proceed to
the highlighted route” is heard.
The vehicle is now in route
guidance mode.
See “Address” under Destination on
page 63 for more information.
11
Entering a Point of Interest (POI)
6. Select the POI from the list.
To set a destination by entering
a Point of Interest (POI):
7. If there is more than one city, the
system displays the list of cities
that have a street with that
name. Select a city from the list
or select the Input Name
screen button to input the
city name.
A map screen appears with the
destination marked.
1. Press the power/volume knob to
turn the system on.
2. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 36 for more
information.
A notice may appear. Touch the
I agree screen button to
proceed.
3. Press the ROUTE hard key.
Verify that the selected Region is
correct.
4. Press the
button.
i (POI) screen
5. Enter the specific title of the
POI in the name space (i.e.
Washington Monument) using
the alpha keypad on the screen.
8. Select the h (destination)
symbol screen button.
9. Select the Guide screen button.
10. Once you begin driving, an
audio prompt to “Proceed to
the highlighted route” is
heard. You are now in route
guidance mode.
Using the Category or City
selections will aid the system in
finding your POI by limiting
the search options. See “Point of
Interest (POI)” under Destination on
page 63 for more information.
12
Infotainment System
Storing a Home Destination
1. Press the power/volume knob to
turn the system on.
2. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 36 for more
information.
A notice may appear. Touch the
I agree screen button to
proceed.
3. Press the
) (map) hard key.
4. Press the Menu screen button
from the map screen.
5. Press the N Memory Points
screen button.
6. Press the
button.
L Home screen
7. Press the Add screen button.
8. Press the Address screen button
and enter all address information.
9. Press the OK screen button.
The L Home icon will be
highlighted on the DESTINATION
ENTRY screen. See “Using
Your Home or Preset
Destinations” later in this section
for more information.
See “Memory Points” under
Navigation Menu on page 47 for
more information.
Storing a Preset Destination
1. Press the power/volume knob to
turn the system on.
2. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 36 for more
information.
A notice may appear. Touch the
I agree screen button to
proceed.
3. Press the
) (map) hard key.
4. Press the Menu screen button
from the map screen.
5. Press the N Memory Points
screen button.
6. Press the A Preset Dests.
screen button.
7. Press the Add screen button and
select the numbered preset row
to store the destination as.
8. Press the Address screen button
and enter all address information.
9. Press the OK screen button.
The numbered preset
destination will be highlighted on
the DESTINATION ENTRY
screen. See “Using Your Home
or Preset Destinations” later
in this section for more
information.
See “Memory Points” under
Navigation Menu on page 47 for
more information.
Infotainment System
Using Your Home or Preset
Destinations
These destinations are available for
selection while driving.
1. Press the power/volume knob to
turn the system on.
2. Insert the DVD map disc. See
“Installing the Map DVD” under
Maps on page 36 for more
information.
A notice may appear. Touch the
I agree screen button to
proceed.
3. Press the ROUTE hard key.
Verify that the selected Region is
correct.
4. Select the L(Home symbol) or
one of the available preset
destination symbols. A map
screen appears with the
destination marked.
5. Select the h (destination)
symbol screen button.
6. Select the Guide screen button.
7. Once driving begins, an audio
prompt to “Proceed to the
highlighted route” is heard.
The vehicle is now in route
guidance mode.
See “Preset Destination” or
“Home” under Destination on
page 63 for more information.
Guidance Volume
To adjust the volume of voice
guidance prompts:
1. Press the CONFIG hard key.
2. Press the 3 (navigation
set up) screen button.
> Volume screen
Canceling Guidance
3. Press the
button.
Guidance is canceled once at the
final destination. To cancel guidance
prior to arrival at the final
destination:
4. Select the desired volume or
select Off. The system plays
back the new volume level.
1. Press the
) (map) hard key.
2. Press the Menu screen button
from the map screen.
3. Press the E Change Route
screen button.
4. Press the Cancel Guidance
screen button.
5. Press the Yes screen button to
confirm cancellation.
See “Volume” under Configure
Menu on page 80 for more
information.
13
14
Infotainment System
Cleaning the Display
Radio
If the panel or the display is stained,
wipe it with a dry, soft cloth, such
as a silicon cloth.
AM-FM Radio
Notice: If you use abrasive
cleaners when cleaning glass
surfaces, you could scratch the
glass. When cleaning the
glass, use only a soft cloth and
do not spray cleaner directly
on the system.
Do not apply spray cleaner directly
to the system, the cleaner could
affect the mechanical parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
thinner or alcohol, it could scratch
the surface or erase the characters.
The vehicle has a feature called
Retained Accessory Power (RAP).
With RAP, the audio system
can be played even after the ignition
is turned off. See “Retained
Accessory Power (RAP)” in the
Index of the vehicle’s owner manual
for more information.
The audio system is operated using
navigation system menus. The
audio menus are explained in this
section.
Radio Personalization
With this feature, the latest audio
system settings that were adjusted,
the last time your vehicle was
operated, can be recalled. This
feature allows two different drivers
to store and recall their own
audio system settings. The settings
recalled by the audio system are
determined by which RKE
transmitter (1 or 2) was used to
enter the vehicle. The number on
the back of the RKE transmitter
corresponds to driver 1 or to
driver 2. The audio system settings
automatically adjusts to where
they were last set by the identified
driver. The settings can also be
recalled using the memory screens
under the CONFIG MENU or
voice recognition. See
Personalization on page 101 for
more information.
When battery power is removed and
later applied, the audio system
preset stations does not have to be
reset.
Infotainment System
Playing the Radio
O n (Power/Volume): Press to
turn the audio system on and off.
Turn the knob to increase or
to decrease the volume to the audio
system.
BAND: Press to access the audio
source screen. Then press this
key to switch between AM, FM, WX
(weather), or XM (if equipped).
AUX (Auxiliary): Press to play the
video and audio devices connected
to the auxiliary jacks. See Auxiliary
Devices on page 33 for more
information.
SRCE (Source): Press to change
the audio source from the radio
band to CD, audio DVD, or video
DVD, depending on what is loaded
in the six-disc DVD changer, or
from DVD/CD to radio mode.
e
(Audio): Press to view the
AUDIO ADJUST screen. See “Audio
Adjust” screen later in this section.
15
« ª (Seek/Scan): To seek
stations, press the up or down arrow
to go to the next or previous
station and stay there.
To scan stations, press and
hold either arrow for less than
two seconds. The radio goes to
a station, plays for a few seconds,
then goes to the next station.
To stop scanning, press either
arrow again or touch the scan
screen button.
Tuning Knob: Turn to change
frequencies.
Finding a Station
Press the band/source screen
button, located in the top left corner
(AM, FM, CD, etc.), from any
screen to access the audio source
screen. Once this screen is
displayed, press the BAND hard key
to toggle between the bands or
touch the desired band screen
button, to select it.
FM source shown, other
sources similar
Scan: To scan stations, touch the
Scan screen button. The radio
goes to a station, plays for a few
seconds, then goes to the next
station. Touch Scan again to stop
scanning.
To scan preset stations, touch and
hold Scan for two seconds. The
radio goes to the next preset station,
plays for a few seconds, then
goes to the next preset station.
Touch Scan again to stop scanning.
16
Infotainment System
While in A.B.C mode, the system
changes bands and screens to
the current band.
If available on the vehicle, the
1 - 6 (preset seek) steering wheel
control can also be used. Each
press of this button goes to the next
preset station.
Auto Store (Automatic): Select to
automatically create a preset
station list of the strongest stations
available in the local area. Once
this button is selected, the system
starts storing stations in sequential
order, starting from the station
currently selected. Select this
button again to return to the
original preset stations. This is
not available for XM™ Satellite
Radio Stations or when A.B.C. has
been selected on.
Info (Information): See “Radio
Data System (RDS)” later in
this section.
Category: See “Radio Data System
(RDS)” later in this section.
Preset Stations
A.B.C Preset Stations
Storing Preset Stations
A.B.C: This feature stores up to
42 presets, six stations in seven
different lists. The presets within
each list can be mixed: AM, FM, or
XM™, if equipped. The list names
are A - G.
This feature stores up to 24 preset
stations. Six AM, six FM, six
WX (weather), and six XM™, if
equipped can be stored. To store
presets:
1. Turn the audio system on or
select the BAND hard key.
2. Select the audio band.
3. Seek, scan, or tune to the
desired station.
4. Press and hold one of the six
preset screen buttons for
more than two seconds or until a
beep is heard.
5. Press the e (audio adjust) hard
key to adjust the tone, Digital
Signal Processing (DSP),
fade, and balance. The screen
times out and the changes
are stored to the preset station.
6. Repeat the steps for each preset.
Press the A.B.C screen button to
enter this feature. Press the left/right
arrow buttons to scroll through the
lists. The name of the list is
displayed between the two arrows
and the presets for each list
are displayed on the preset buttons.
These presets are in addition to
any preset stations that may already
be stored. To exit this feature,
press the A.B.C screen button.
To store the A.B.C presets:
1. Turn the audio system on or
select the BAND hard key.
2. Select the A.B.C screen button.
3. Scroll to the desired list
(A - G).
Infotainment System
4. Select the audio band. The
presets within each list can
be mixed: AM, FM, or XM™,
if equipped.
5. Seek, scan, or tune to the
desired station.
6. Press and hold one of the six
preset screen buttons for
more than two seconds or until a
beep is heard.
Audio Adjust
e (Audio Adjust): Touch to
access the AUDIO ADJUST menu
and to adjust the tone, Digital
Signal Processing (DSP), fade,
and balance for all sources.
The system automatically stores
audio adjustment settings as
changes are made to a preset
station.
7. Press the e (audio adjust) hard
key to adjust the tone, Digital
Signal Processing (DSP),
fade, and balance. The screen
times out and the changes
are stored to the preset station.
17
To use this feature, touch the Audio
Pilot screen button. To turn it off,
touch the screen button again. The
button highlights when this
feature is on.
When on, AudioPilot® continuously
adjusts the audio system
equalization, to compensate for
background noise, so that the music
always sounds the same at the
set volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well you hear the music being
played through the vehicle’s audio
system. At higher volume settings,
where the music is much louder
then the background noise,
there may be little or no adjustments
by AudioPilot®. For more information
on AudioPilot®, visit
bose.com/audiopilot.
8. Repeat the steps for each preset
and list.
Audio Pilot (Noise Compensation
Technology): The vehicle has
Bose AudioPilot® noise
compensation technology.
18
Infotainment System
Multi-channel: When available,
touch this screen button to play the
DVD Audio source in surround
mode. Touch this screen button
again to have the audio play
in 2-channel mode. The system
plays Dolby and DTS tracks
in surround sound. This feature
depends on the media in the DVD
changer.
Setting the Tone
P
(Treble): Touch the plus (+) or
minus (−) sign next to this symbol to
increase or decrease the treble.
Touch the center position to adjust
the setting to the center.
Mid (Mid-range): Touch the plus (+)
or minus (−) sign next to this symbol
to increase or decrease the
mid-range. Touch the center position
to adjust the setting to the center.
D (Bass): Touch the plus (+) or
minus (−) sign next to this symbol to
increase or decrease the bass.
Touch the center position to adjust
the setting to the center.
Z (Speaker): Touch the plus (+)
or minus (−) sign next to this
symbol to increase or decrease the
speaker when in surround mode
or Center Point DSP setting is
selected. It increases or decreases
the amount of surround sound.
Touch the center position to adjust
the setting to the center.
Adjusting the Speakers
Left/Right (Balance): To adjust the
balance between the right and the
left speakers, touch and hold the Left
or Right screen buttons. To center
the balance and the fade, touch the
center, where the two lines meet.
Front/Rear (Fade): To adjust the
fade between the front and the rear
speakers, touch and hold the
Front or Rear screen buttons. To
center the balance and the
fade, touch the center, where the
two lines meet.
Digital Signal Processing (DSP)
This feature is used to provide
a choice of five different listening
experiences. DSP can be used while
listening to the audio system or
the six-disc DVD changer. The type
of DSP selected is displayed on
the status line.
Center Point: Select this screen
button to enable Bose® 5.1
Studio Surround® sound.
Normal: For non-surround sound
sources only. Select this screen
button to adjust the audio to be in
normal mode. DSP will be in the
off mode.
Driver: For non-surround sound
sources only. Select this screen
button to adjust the audio to give the
driver the best possible sound
quality.
Infotainment System
Category: This information
changes depending on what audio
source is selected. This button
is only available when using the FM
or XM™ audio modes. Touch this
button to turn the Category function
on. When on, the button is
available to select from the audio
main menu.
Talk: For non-surround sound
sources only. Select this screen
button when listening to non-musical
material such as news, talk shows,
and sports broadcasts. Talk makes
spoken words sound more clear.
Rear Seat: For non-surround sound
sources only. Select this screen
button to adjust the audio to give the
rear seat occupants the best
possible sound quality.
5.1 Surround: Select this screen
button, when listening to a DVD, to
give a full affect of surround sound
listening. The Centerpoint screen
button must be selected to select the
5.1 Surround screen button.
Audio
Touch the Audio screen button to
access several audio features that
may be turned on and off and several
options are available for adjustment.
The screen buttons next to each
selected option highlights when on.
The items on this menu depends on
which audio source is playing.
19
Auto Store: Touch this button to
turn the Auto Store on for the
current audio source selected. When
on, this button appears on the
main audio screen. This button is
not available when in XM™.
Info (Information): This button is
only available when in FM or XM™.
Select this button to turn information
on. The information changes
depending on the audio source is
selected. When on, the Info
screen button is available to select
from the audio main menu.
r [ r j # # (CD/MP3
Controls): This button is only
available when using the CD or MP3
audio modes. When on, these
screen buttons, rewind, fast forward,
play, pause, previous folder, and
next folder, is available to select
from the audio main menu.
Traffic: This button is only available
when using the FM or CD/DVD
audio modes. When on, the
Navigation System searches for
stations that broadcast traffic
announcements.
20
Infotainment System
The following screen buttons are
only available for video DVDs:
Audio Language: Select this
button to view a list of language
choices. Select the desired
language to change the spoken
language. The list of languages
depends on the languages
supported by the disc.
Subtitle Language: Select this
button to view a list of languages
to choose for subtitles. Select
the language desired. The list of
languages depends on the
languages supported by the disc.
Menu Language: Select this button
to view a list of languages to
choose for the DVD menu text. The
list of languages depends on the
languages supported by the disc.
Parental Level: Select this button if
you choose to set up parental
protection. Use the keypad to enter
the password. Select from options
such as change level and change
password, as necessary.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM stations
that broadcast RDS information.
With RDS, the radio can:
• Seek to stations broadcasting the
selected type of programming
• Receive announcements
concerning local and national
emergencies
• Display messages from radio
stations
• Seek to stations with traffic
announcements
This system relies on receiving
specific information from these
stations and only works when the
information is available. In rare
cases, a radio station may broadcast
incorrect information that causes
the radio features to work
improperly. If this happens, contact
the radio station.
The RDS system is always on.
When information is broadcast from
the FM station that is on, the
station name or call letters display
on the audio screen. RDS may
provide a program type (PTY) for
current programming and the name
of the program being broadcasted.
[ ] (No Traffic Announcements):
This symbol appears on the
status line when traffic is selected,
but the station does not broadcast
traffic announcements.
[TA] (Traffic Announcements):
This symbol appears on the status
line when the station selected
broadcasts traffic announcements.
TA announcements depends on
the station.
Info (Information): Select this
screen button to display information
broadcasted by the RDS station
when in FM. This is not available for
AM or WX stations.
Infotainment System
Category: Select this screen button
when in FM to view the program
types. They appear in place of the
preset stations. Select a category
and the system starts seeking for
available stations within the selected
category. If none are found, the
system displays “None Found” and
returns to the last selected station.
To seek to another category, press
the seek/scan key. The system
seeks to another station in the
category.
To scan stations in the category,
press the Scan screen button.
The system starts scanning the
stations in the category. Press the
Scan screen button to stop scanning
stations.
To exit out of category, select the
category screen button and the
program types no longer display.
Each of the six category names
displayed, include a grouping of
other program types, see the
following table. This is not available
for AM or WX (weather) stations.
Group Name
POP
EASY
TALK
CNTRY
CLASS
JAZZ
Category
Rock
Classic Rock
Adult Hits
Top 40
Oldies Music
Nostalgia
College
Soft Rock
Soft
R&B
Soft R&B
Religious Music
News
Information
Sports
Talk
Language
Religious Talk
Personality
Public
Weather
Country Music
Classical
Jazz Music
21
Satellite Radio
XM™ Satellite Radio Service
XM™ is a satellite radio service that
is based in the 48 contiguous United
States and 10 Canadian provinces.
XM Satellite Radio has a wide variety
of programming and commercial-free
music, coast-to-coast, and in
digital-quality sound. During your trial
or when you subscribe, you will get
unlimited access to XM Radio Online
for when you are not in the vehicle. A
service fee is required to receive the
XM service. For more information,
contact XM at www.xmradio.com or
call 1-800-929-2100 in the U.S. and
www.xmradio.ca or call
1-877-438-9677 in Canada.
When XM™ is active, the channel
name and number, song title,
and artist will be displayed on the
screen.
22
Infotainment System
Info (Information): Select to
display broadcasted Information.
Select Info again to remove the
broadcasted information from the
display.
3. Use the left and right arrows to
scroll through the categories.
The current category name
is displayed in between the
arrows. The category display on
the screen times out if you do
not select anything.
3. Use the left and right arrows to
scroll through the categories.
The current category name
is displayed in between the
arrows. The category display on
the screen times out if nothing
is selected.
4. Select a category and the
system starts seeking for
available stations within the
selected category.
To view the available channels
within the category, select
the category, then use the tune
knob or seek button to scroll
through the available channels.
4. Select the desired category.
To select a category:
Category Scanning: This function
allows scanning through the
channels in a specific category. To
activate the category scan function:
1. Select the XM™ audio source.
1. Select the XM™ audio source.
2. Select the Category screen
button.
The system displays the
available categories in place of
the preset stations.
2. Select the Category screen
button.
The system displays the
available categories in place of
the preset stations.
Category: Use this feature to listen
to channels in a specific category.
5. Select the Scan screen button
and the system scans through
the channels within the selected
category. Select Scan again
to stop scanning.
When scanning XM™ channels,
scanning will not stop on
Channel 1.
XM™ Radio Messages
See “XM™ Radio Messages” in the
vehicle’s owner manual” for a list
of possible XM messages.
Infotainment System
Audio Players
CD/DVD Player
This system can play different types
of media formats: DVD - Video,
DVD - Video (DTS), DVD - Audio,
CD - Digital Audio (CD - DA), CD-DA
(DTS), CD - Text, CD - Extra,
MP3 - CD, CDR, and CDRW. The
system may also play DVD - R
and DVD - RW type discs depending
on the writing software used. The
system may play DTS and
Dolby tracks in surround sound.
If playing a CD-R the sound quality
may be reduced due to CD-R
quality, the method of recording, the
quality of the music that has been
recorded, and the way the CD-R has
been handled. There may be an
increase in skipping, difficulty
in finding tracks, and/or difficulty in
loading and ejecting.
If these problems occur, check the
bottom surface of the CD. If the
surface of the CD is damaged, such
as cracked, broken, or scratched,
the CD will not play properly. If
the surface of the CD is soiled, see
“Care of Your CDs” in the Index
of your vehicle’s owner manual.
23
Do not add any label to a CD, it
could get caught in the CD player.
If a CD is recorded on a personal
computer and a description label is
needed, try labeling the top of
the recorded CD with a soft marker
instead.
If there is no apparent damage, try
a known good CD.
Notice: If a label is added to a
CD, or more than one CD is
inserted into the slot at a time, or
an attempt is made to play
scratched or damaged CDs, the
CD player could be damaged.
While using the CD player,
use only CDs in good condition
without any label, load one
CD at a time, and keep the CD
player and the loading slot free of
foreign materials, liquids, and
debris.
With the six-disc CD/DVD changer,
up to six audio CDs, MP3s, DTS
discs, audio DVDs, or video
DVD discs can be played
continuously.
24
M
Infotainment System
(Load): To load one disc:
1. Press the load hard key and
follow the screen message
displayed.
2. Select the slot number, 1 through
6, to load the disc into. If a slot is
not selected, the system loads
the first available slot.
3. When the screen displays “Insert
Disc (number)”, insert the disc
partway into the slot, label
side up. The system pulls it in
and starts playing. The system
displays the type of disc inserted,
DVD - Video, B Audio for
CD/DTS, MP3 for MP3 CDs, or
DVD - Audio.
To load multiple discs:
1. Press and hold the load hard key.
2. When the screen displays “Insert
Disc (number)”, load the disc
partway into the slot, label side
up. The system pulls it in.
3. Once a CD is loaded, the system
displays “Insert Disc (number)”
again. Load the next disc. Repeat
this procedure for each disc.
The player takes up to six disc(s),
do not try to load more than
six. The system will not display
the disc types when loading
all, until the discs have been
read by the system.
Once all discs have been
inserted, the system starts
playing the last loaded disc.
If no CD or DVD is loaded in the
CD/DVD changer and the
SRCE hard key is pressed, a
“No disc loaded” error message
displays.
Select the Cancel screen button,
when available, to stop the
loading process and to start
playing the last loaded disc.
Z
(Eject): To eject a disc:
1. Press the eject hard key.
2. Select the slot number,
1 through 6, to eject the disc.
3. The system displays “Ejecting
Disc” and then ejects the disc.
If a selection is not made,
the system ejects the disc from
the current slot. If the disc is
not removed from the slot,
the system pulls it back in
after 10 seconds and starts
playing it.
To eject all discs at once, press and
hold the eject hard key. The
system displays the disc number
being ejected.
Playing an Audio CD
The numbered screen buttons,
1 through 6, represent the order of
the discs loaded in the changer.
If there are only two discs loaded,
only screen buttons 1 and 2 are
available.
The play, reverse, fast forward, and
pause screen buttons only appear
when the CD/MP3 controls button is
selected on in the Audio screen.
Infotainment System
r (Play): Select this screen button
or press one of the available
screen buttons, 1 through 6, to begin
playing that disc. There is a 12 to
15 second delay while the CD
is read, before it begins to play.
r
(Reverse): Press and hold to
reverse through the current
track. If reverse past the current
track, the system goes to the
previous track on the disc.
[
(Fast forward): Press and hold
to fast forward through the current
track. If fast forward past the current
track, the system goes to the next
track on the disc.
j
(Pause): Select to pause play.
Select this button again to
resume play.
Scan: Select to toggle between the
following scan options:
B
SCAN (Scan One Disc):
If this symbol appears on the display
after pressing the Scan screen
button, the system plays the first
10 seconds of each track on
the current playing disc. Select the
OFF screen button to stop
scanning. When the system has
scanned through all of the tracks,
the system automatically stops
scanning.
M SCAN (Scan All Disc): If this
symbol appears on the display after
pressing the Scan screen button,
the system plays the first
10 seconds of each track on all of
the loaded discs of the same media
type. Select the OFF screen
button to stop scanning. When the
system has scanned through all
of the discs, the system
automatically stops scanning.
y
(Random): Select to toggle
between the following random
options:
B RND (Random One Disc): If
this symbol appears on the
display after pressing the random
screen button, the system plays the
25
tracks on the selected disc, in
random, rather than sequential,
order. Select the OFF screen button
to turn off random play.
M RND (Random All Discs):
If this symbol appears on the display
after pressing the random screen
button, the system plays the
tracks on all of the loaded discs, in
random, rather than sequential,
order This function randoms all discs
of the same media type. Select
the OFF screen button to turn off
random play.
k
(Repeat): Select to toggle
between the following repeat
options:
X RPT (Repeat Track): If this
symbol appears on the display after
pressing the repeat screen button,
the system repeats the track
currently playing. Select the OFF
screen button to turn off repeat play.
26
Infotainment System
B RPT (Repeat Disc): If this
symbol appears on the display after
pressing the repeat screen button,
the system repeats all of the
tracks on the disc currently playing.
Select the OFF screen button to
turn off repeat play.
Playing an Audio or
Video DVD
When an audio or video DVD has
been loaded, the following
screen appears. Some features do
not function for both audio and
video DVDs.
OFF: Select to stop the scan,
random, or repeat functions.
To switch these groups:
1. Put the vehicle in P (Park).
2. Access the DVD/CD menu
screen.
3. Select the Search screen button.
¦ t u ¥ (Seek Key):
Press the
up arrow to seek to the next
track on a disc. If playing the last
track, pressing the up arrow
seeks to the first track of the next
disc with the same media type
or goes to the first track of
the selected disc.
Press the down arrow to go to the
beginning of the current track
or to the previous track on a disc. If
playing the first track, pressing
the down arrow seeks to the last
track on the selected disc.
Group 1 may play the album in
PPCM audio and Group 2 may play
the album in Dolby Surround
Sound.
4. Input the number of the group
into the numeric keypad.
5. Select the Enter screen button.
6. Press the
hard key.
e (audio adjust)
7. Select the Multi-channel screen
button, if it is not already
highlighted.
To get the best sound quality from
an audio DVD, the current group
that is playing may need to be
changed. Audio DVDs are usually
set up with multiple copies of
the album on the disc, called groups.
If the DTS or Dolby logo is shown
on the status line, but the
Multi-channel screen button is
grayed out, the group may contain
two audio streams (one is stereo
source and the other is surround
source, DTS or Dolby) in one group.
Infotainment System
In this case, user needs to switch
audio streams by pressing the Audio
screen button on the DVD/CD
screen. Press e to check if the
Multi-channel screen button
is selected. This button is only
selectable when playing DTS or
Dolby tracks in surround sound.
Menu: Select to access the DVD’s
menu options. Depending on the
type of DVD you are using, this
screen button may or may not be
available.
DVD Menu: Select to access the
video DVD menu. DVD must
be playing to select this feature.
While watching a video DVD or
playing an audio DVD, touch
anywhere on the screen to remove
all screen button functions from the
display. Touch anywhere on the
screen again to display the screen
buttons.
Audio: Select to change the audio
language heard, English or French.
DVD must be playing to select this
feature. This may not be available on
all DVDs.
Angle: Select to adjust the viewing
angle of the DVD. Some DVDs
allow you to change the camera
angle. This may not be available on
all DVDs.
Subtitle: Select to play back the
video with subtitles. Select English,
French, or Off. DVD must be
playing to select this feature. This
may not be available on all DVDs.
27
3. Select the OK screen button and
the system goes to the specified
title/group or chapter/track.
4. Select the Search screen button
to exit the search feature.
r / [ (Reverse/Fast Forward):
Touch the left or right arrows to
reverse or fast forward within
a track.
r (Play): Select to begin playing
the currently selected disc.
Search: Select to search through a
DVD by Title/Group, or
Chapter/Track. Touch Keypad to
access the numeric keypad used to
enter data in these searches.
j
To use the search button:
o (Stop): Select to stop playing
the disc.
1. Select the Search screen button
from the DVD-Video or
DVD-Audio screen.
2. Select the Keypad screen button
to access a numeric keypad to
enter the title/group or
chapter/track number.
(Pause): Select to pause the
currently playing disc. Select
this button again or the play button
to resume play.
L
(Frame Advance): Select to
play the disc in slow motion.
28
Infotainment System
Display Menu
HOME: Select this screen button to
take you back to the home page
of the DVD disc.
Scan: Select to hear the first
10 seconds of each track, in the
current group, on the selected disc.
Select the OFF screen button to
stop scanning. Scanning stops when
the system has scanned through
all of the tracks. This function
is available for DVD audio only.
Display: Select to access more
audio/video DVD options.
a (Page Up): Select the page
up symbol to scroll up through
the pages of an audio DVD. The
function of this screen button
depends on the disc inserted.
` (Page Down): Select the page
down symbol to scroll down
through the pages of an audio DVD.
The function of this screen button
depends on the disc inserted.
y (Random Track): Select
to hear the tracks, in the current
group, on the selected disc, in
random, rather than sequential,
order. Select the OFF screen
button to turn off random play. This
function is available for DVD
audio only.
k (Repeat): Select to repeat the
current track. Select this screen
button again to repeat the current
playing group on the disc. Select the
OFF screen button to turn off
repeat play. This function is
available for DVD audio only.
OFF: Select to turn off the scan,
random, and repeat functions.
¦ t u ¥ (Seek Key):
Press the
up arrow hard key to go to the
next track in the current group. If
you are in the last track, the system
goes to the first track of the next
group. If you are in the last track of
the last group, the system displays
an error message in the upper
right corner of the screen.
Press the down arrow hard key to
go back to the beginning of the
current track. Press the down arrow
hard key again to go to the
previous track in the current group.
If you are in the first track of the
current group, pressing this hard key
takes you to the last track of the
previous group. If you are in the first
track of the first group, the system
displays an error message in
the upper right corner of the screen.
Infotainment System
Cursor Menu
Cursor: Select to access the left,
right, up, and down cursors on
the screen. The cursors allow
navigation through menu options on
the screen.
29
Keypad: Select this button and a
number keypad appears. Enter
the track number, press enter, and
the system plays the track.
]
W (Back)/ Return: Select either
button to return to the previous
screen.
Tint: Select the plus (+) or minus (−)
signs next to this symbol to increase
or decrease the screen tint.
Screen Adjust Menu
Screen Adjust: Select to access
the audio/video DVD screen
adjust menu.
' (Color): Select the R (red) or G
(green) next to this symbol to
increase or adjust the color of the
screen.
(Brightness): Select the plus
(+) or minus (−) signs next to
this symbol to increase or decrease
the brightness.
p
(Widescreen): Select to view a
video DVD in widescreen format.
d (Full Screen): Select to view a
video DVD in full screen format.
e
(Normal Screen): Select
to view a video DVD in normal
screen size.
S, y, T, z (Cursor Arrows):
Select these cursor screen buttons
when scrolling through a list of
DVD items is needed, such as track
names, menu options, or scene
selection. Then touch Enter to set
your selection.
_ (Contrast): Select the
plus (+) or minus (−) signs next to
this symbol to increase or decrease
the contrast.
30
Infotainment System
Disc Errors
MP3
Although the DVD or CD you
are playing meets regulation
requirements, there are
circumstances that may cause the
disc to not play correctly. Some
of those circumstances may include
the recording conditions of the
disc, the disc condition, and the pick
up circumstances of the player.
Using an MP3
If using the system in extremely low
or high temperatures, the video
playback may become distorted.
Because of some types of
compression techniques used
during recording MP3 discs, the
sound quality of the discs can
be inferior. This is not caused by
the audio system.
MP3 Format
When creating an MP3 disc, the
following is a list of guidelines. If the
customer does not follow these
guidelines when recording a
CD-R(W), the CD may not play.
• Maximum 32 characters,
including spaces, in a file
or folder name.
• Maximum number of folders is
253 with a maximum hierarchy
of eight folders.
• Create a folder structure that
22.05 kHz, 24 kHz, 32 kHz, and
44.1 kHz.
makes it easy to find songs while
driving. Organize songs by
albums using one folder for each
album. Each folder or album
should contain 18 songs or less.
• Bit rates supported: 32, 40, 48,
• It is recommended that there is a
• Sampling rate: 16 kHz,
56, 64, 80, 96, 112, 128, 160,
192, 224, 256, and 320 kbps.
• ID3 tag information is displayed
by the radio if it is available.
The radio supports ID3 tag
information v1.0 or v1.1. The
radio will display a filename, song
name, artist name, album
name, and directory name.
maximum of 192 files on a disc.
• The files can be recorded on a
CD-R or CD-RW with a maximum
capacity of 700MB.
• DVD with MP3 are not playable
on this system.
• The radio will play a mixed mode
CD-R/RW, a disc recorded with
both *.cda and *.mp3 files.
Infotainment System
Playing an MP3
Display: Select to display the MP3
play list. Use the up/down arrows
to scroll through the list. Select
the folder or track to play. While in
this menu, you can use the
scan, random, and repeat functions.
Press Display again to go back to
the main screen.
' (Root Directory): Select to go
to the root directory, if available,
on the MP3 disc. While in this mode,
you can select a specific folder
to play.
The play, reverse, fast forward,
pause, previous folder, and
next folder screen buttons only
appear when the CD/MP3 controls
button is selected on in the
Audio screen. Insert an MP3, then
see CD/DVD Player on page 23
for more information.
r (Play): Select this screen button
or press one of the available
screen buttons, 1 through 6, to begin
playing that disc. There is a 12 to
15 second delay while the CD
is read, before it begins to play.
HOME: Select this screen button to
allow you to go to the Home
folder. This is the first folder on
the disc.
r
(Reverse): Press and hold to
reverse through the current track.
[
(Fast forward): Press and hold
to fast forward through the current
track.
31
j
(Pause): Select to pause play.
Select this button or the play
button to resume play.
# – (Previous folder): Select to
go to the previous folder.
# + (Next folder): Select to go
to the next folder.
Scan: Select the Scan screen
button to toggle between the
following scan options:
' SCAN (Scan Folder): If this
symbol appears on the display after
pressing the Scan screen button,
the system plays the first
10 seconds of each track, in each
folder, on the current playing
disc. Select the OFF screen button
to stop scanning. When the
system has scanned through all of
the tracks, the system automatically
stops scanning.
32
Infotainment System
B
SCAN (Scan One Disc): If this
symbol appears on the display after
pressing the Scan screen button, the
system plays the first 10 seconds of
each track on the current playing
disc. Select the OFF screen button to
stop scanning. When the system has
scanned through all of the tracks, the
system automatically stops
scanning.
M SCAN (Scan All Disc): If this
symbol appears on the display after
pressing the Scan screen button, the
system plays the first 10 seconds of
each track on all of the loaded discs
of the same media type. Select the
OFF screen button to stop scanning.
When the system has scanned
through all of the discs, the system
automatically stops scanning.
y (Random): Select the random
screen button to toggle between
the following random options:
' RND (Random One Folder): If
this symbol appears on the display
after pressing the random screen
button, the system plays the tracks,
in the current folder, on the
current playing disc, in random,
rather than sequential, order. Select
the OFF screen button to turn off
random play.
B RND (Random All Folders): If
this symbol appears on the display
after pressing the random screen
button, the system plays the
tracks, in all folders, on the current
playing disc, in random, rather
than sequential, order. Select the
OFF screen button to turn off
random play.
M
RND (Random All Discs): If
this symbol appears on the display
after pressing the random screen
button, the system plays the tracks
on all of the loaded discs, in
random, rather than sequential,
order This function randoms all discs
of the same media type. Select
the OFF screen button to turn off
random play.
k (Repeat): Select to toggle
between the following repeat
options:
X RPT (Repeat Track): If this
symbol appears on the display after
pressing the repeat screen button,
the system repeats the track
currently playing. Select the OFF
screen button to turn off repeat play.
'
RPT (Repeat Folder): If this
symbol appears on the display after
pressing the repeat screen button,
the system repeats the folder
currently playing. Select the OFF
screen button to turn off repeat play.
B RPT (Repeat Disc): If this
symbol appears on the display after
pressing the repeat screen button,
the system repeats all of the
tracks on the disc currently playing.
Select the OFF screen button to
turn off repeat play.
Infotainment System
OFF: Select to turn off the scan,
random, or repeat functions.
Combined Disc: This system also
plays a combined disc which
contains CD-DA and MP3 types of
media. Use the CD screen button
to switch between MP3 and CD-DA
tracks when playing a combined
disc.
¦ t u ¥ (Seek Key):
Press the
up arrow to seek to the next
track on a disc. If playing the
last track, pressing the up arrow
seeks to the first track of the
next disc with the same media type
or go to the first track of the
selected disc.
Press the down arrow to go to the
beginning of the current track
or to the previous track on a disc.
If playing the first track, pressing the
down arrow seeks to the last
track on the selected disc.
Auxiliary Devices
The audio and video adapters
enable connection of audio and
video devices, such as a hand-held
computer, video camera or a
video cassette recorder, to the
navigation system. The audio and
video input from the playback source
is viewed on the navigation system
screen and the audio is heard
through the speakers. The video
image is only available when
the vehicle is in P (Park).
Drivers are encouraged to set up
any auxiliary device while the
vehicle is in P (Park). See
“Defensive Driving” in the Index of
the vehicles owner manual for
more information on driver
distraction.
Connect the auxiliary device to the
audio and video connectors,
located in the center console. The
system requires standard RCA
cables, not included, to connect the
auxiliary device to the RCA jacks.
33
Refer to the manufacturer
instructions for proper usage. The
video, and left, and right audio jacks
have graphics and color coding to
allow for easy identification.
Connect the auxiliary devices to the
jacks as follows:
• Connect the video input of the
auxiliary device to the yellow
video input/output jack.
• Connect the left audio input of
the auxiliary device to the
white audio input jack. For
auxiliary devices that only have
one audio connection, use
the white jack.
• Connect the right audio input of
the auxiliary device to the red
audio input jack.
34
Infotainment System
Auxiliary Video Image Screen
To play other audio sources using
the auxiliary device:
1. Connect the auxiliary device as
explained previously.
2. Play the auxiliary device
according to the auxiliary devices
instructions.
3. Press the AUX hard key.
4. Select the Video In/Out screen
button.
5. Press the BAND or the SRCE
hard key to exit or stop playing
the connected auxiliary
device. See AM-FM Radio on
page 14 and Satellite Radio
on page 21 for more information.
Navigation
Using the Navigation
System
This section presents basic
information needed to operate the
navigation system.
Use the hard keys located on the
navigation system along with
the available touch screen buttons
on the navigation screen to
operate the system. See Overview
on page 4 for more information.
Once the vehicle is moving, various
functions are disabled to reduce
driver distractions.
Hard Keys
The following hard keys are located
on the navigation system:
Z
(Map DVD Eject): Press this
key located next to the map
DVD loading slot to eject the map
DVD. The map DVD slot is the
slot directly below the display
screen.
M (Load): Press the CD/DVD
changer loading key to go to
the loading screen and begin
loading DVDs or CDs. See CD/DVD
Player on page 23 for more
information.
Z
(CD/DVD Eject): Press the
eject key next to the CD/DVD
changer loading slot to begin
ejecting DVDs or CDs. See CD/DVD
Player on page 23 for more
information.
Infotainment System
O n (Power/Volume): Press to
turn the audio system on and off.
Turn the knob to increase or
decrease the volume to the audio
system.
y m z (Tilt):
Press the up arrow
on the tilt key to tilt the navigation
screen forward. Press the down
arrow on the tilt key to tilt the screen
rearward. There are three tilt
positions to choose from.
BAND: Press to access the audio
source screen. The press the
BAND key to toggle among the
bands available, FM, AM, XM
(if equipped), and WX (weather).
See AM-FM Radio on page 14 and
Satellite Radio on page 21.
SRCE (Source): Press to switch
between the audio sources.
Pressing this key will switch
between the radio and the CD/DVD
player. See AM-FM Radio on
page 14 and Satellite Radio on
page 21.
AUX (Auxiliary): Press to access
screens from which you will
operate Bluetooth®, OnStar®, or
control video input. See Bluetooth
on page 102, OnStar® System
on page 79, and Auxiliary Devices
on page 33 for more information.
e
(Audio): Press to access
the Audio Adjust screen, to adjust
bass, midrange, fade, balance,
and DSP (Digital Signal Processing)
settings. See AM-FM Radio on
page 14 and Satellite Radio
on page 21.
ROUTE: Press to access the
Destination Entry screen or the
search area and begin planning a
destination. See Destination on
page 63.
CONFIG (Configure): Press to
access the SETTING Function
screen. See Configure Menu on
page 80.
35
) (Map): Press to access the map
screen.
k
(Navigation Repeat): Press to
repeat the last voice guidance
prompt, while on a planned route.
y © ¨ z (Seek/Scan): Press
the seek/scan arrows to go to
the next or previous radio station, or
press and hold to scan stations.
See AM-FM Radio on page 14 and
Satellite Radio on page 21.
w (Tune) Knob: Turn to change
frequencies. See AM-FM Radio
on page 14 and Satellite Radio on
page 21.
36
Infotainment System
Alpha-Numeric Keypad
Letters of the alphabet, symbols,
punctuation, and numbers display
on the navigation screen as an
alpha or numeric keypad. The alpha
keypad displays when the system
needs input of a city or street name.
All characters are touch-sensitive
screen buttons. Touch a character to
select it.
Sym. (Symbol): Touch to access
the numeric keypad, punctuation
marks, and other characters. There
are two pages available. Use the
right and left arrow screen buttons to
view the pages.
A - Z (Alphabet): Touch to display
to the alpha keypad.
Others: Touch to display special
characters. There are two pages of
characters available. Use the
right and left arrow screen buttons
to view the pages.
U (Space): Touch to enter a
space between characters or
the words of a name.
V
(Back space): Touch if an
incorrect character has been
selected.
To make name selections easier,
the system only allows selection of a
character which can follow the
last one entered. For example, if a
Z is entered, a T is not available
to select. The system highlights the
available characters.
If a name is not available after
input, it may need to be entered
differently, the map DVD database
may not contain that information,
or the correct search area has
not been selected. See Maps on
page 36 for more information.
Touch-Sensitive Screen
Buttons
Touch-sensitive screen buttons are
located on the screen. When a
screen button has been selected, a
beep sounds. These buttons are
highlighted when a feature is
available. There are also some
toggle screen buttons that are light
blue when active and dark blue
when inactive.
Maps
This section includes basic
information about the map database.
The maps are stored on a
DVD-ROM. The 48 contiguous
United States and portions of
Canada are contained on two discs.
To minimize the necessity of
changing the discs, both map discs
cover US6, US7, and Canada.
Infotainment System
Installing the DVD Map Disc
Your dealer/retailer may have
installed the map DVD. If the map
DVD was not installed, do the
following to load it:
Read the following steps completely
before operating this feature.
1. Turn the ignition on.
West
2. Load the map DVD into the slot,
located just below the navigation
system screen, by inserting it
partially until the system pulls
it in.
Once the map DVD is inserted
correctly, you will have the following
two choices:
I agree: Touch this screen button
to proceed to the navigation system.
East
^ (Language): Touch this screen
button to change the language of the
navigation system, Driver Information
Center (DIC), Head-Up Display
(HUD), etc. See “Language” under
Personalization on page 101 for
more information.
37
Once a language has been selected,
touch I agree to enter the navigation
system. The map appears showing
the current vehicle position.
DVD Map Disc Messages
If an error appears on the display
and/or the map disc comes out,
it could be for one of the following
reasons:
• The map disc was installed into
the CD slot. See “Installing the
DVD Map Disc” previously.
• It is very hot, when the
temperature returns to normal,
the map disc should play.
• The vehicle is being driven on a
very rough road. When the road
becomes smoother, the map
disc should play.
• The map disc is dirty, scratched,
wet, or upside down.
If any error occurs repeatedly or if
an error cannot be corrected,
contact your dealer/retailer.
38
Infotainment System
Ejecting the DVD Map Disc
When the DVD map disc is
not loaded, the navigation portion of
the system cannot be used.
• Do not use the disc to rest on
Z (Map DVD Eject): Press the
eject key, located next to the
map DVD loading slot, to eject the
map disc. Pull the disc out. The
map DVD slot is the slot directly
below the display screen.
• Do not keep the disc in direct
Handling the DVD Map Disc
Setting the Search Area
When handling the DVD map
disc, be careful of the following:
• Handle the disc very carefully to
avoid contamination or flaws.
Signals may not read out properly
if the disc gets contaminated
or flawed.
• If the disc gets soiled, use a soft
cloth to gently wipe it out from
the center of the disc to the
outside. Do not use photographic
record cleaner, solvents, or
other cleaners.
Map Scales
while writing or drawing using
any writing utensil or attach
a seal to any of the sides or
the disc.
sunlight, high temperatures,
or humidity.
• After using the disc, place it back
into the original case.
See Destination on page 63 for
information on changing the
search area.
Map Adjustments
The scale of view on the map can
be adjusted. As you drive, the
map scrolls automatically based on
the direction you are traveling.
To view a larger or smaller scale of
the map, touch the map scale
arrows.
Change the level of map detail by
either zooming in or zooming
out using the arrow screen buttons
or by touching the scale on the
bar. The system adjusts the map
accordingly. The scale of a map can
range from 50 m (1/32 mi) to
256 km (128 miles).
Infotainment System
Scrolling the Map
Touch anywhere on the map screen
twice and the scroll symbol
appears. Use this feature to scroll
across the map.
Hold your finger in any direction
outside of the scroll symbol and the
map continues to scroll in that
direction until your finger is removed
from the map screen.
If scrolling while the vehicle is in
P (Park), the system scrolls initially
at a slower rate. It increases if
you continue touching the map
screen.
If scrolling while the vehicle is in
motion, there is one scroll speed
and a limited distance to scroll. Keep
touching the map screen to scroll
for a longer distance.
39
Navigation Symbols
The following symbols are the most
common symbols that appear on
a map screen.
If the scroll feature is used to scroll
the map and the vehicle icon
becomes lost, press the map hard
key to return to the current
vehicle location on the map.
When scrolling on the map, the
system displays the address of the
scroll symbol location and the
distance from the vehicle’s current
position to the scroll symbol location.
The vehicle is shown as this
symbol. It indicates the current
position and heading direction of the
vehicle on the map.
Use the scroll feature on the map
to set a destination. See “Map”
under Destination on page 63 for
more information.
The destination symbol appears on
the map after a route has been
planned marking the final
destination.
40
Infotainment System
The waypoint symbol displays on
the map after a waypoint has
been added to the route.
The waypoint symbol is numbered
from one through five depending
on how many waypoints have
been set.
The distance to destination symbol
indicates the distance to the
final destination. It only appears
when time is not available or when
scrolling on the map.
The distance and time to destination
symbol indicates the distance and
the estimated time remaining to
the final destination or arrival time,
depending on the option selected.
See Destination on page 63.
The straight line to distance symbol
shows the straight-line distance
to your destination.
This symbol appears before starting
to drive on the route or if the
vehicle is on a road where
navigation guidance cannot be
given.
Infotainment System
41
.
The north up symbol indicates
the map with North Up, known as
North Up mode.
While in North Up mode, the vehicle
icon follows the north direction on
the map regardless of which
direction the vehicle is traveling.
Select this screen symbol to switch
between North Up and Heading
Up modes
The heading up symbol indicates
the map with the vehicle travel
direction up, known as Heading
Up mode.
The shaded triangle indicates the
North direction. While in Heading Up
mode, the direction the vehicle is
traveling is always at the top of the
map screen. The vehicle icon is
always headed in the direction the
vehicle is traveling. Select this
screen symbol to switch between
Heading Up and North Up modes.
The No GPS symbol appears when
the vehicle is not receiving a
Global Positioning System (GPS)
satellite signal.
See Global Positioning System
(GPS) on page 88.
When a name is too long to be
displayed, an arrow symbol appears.
Select the right or left arrow
screen button to scroll through the
entire name.
42
Infotainment System
Select the POI screen button to
display the following screen:
This symbol indicates the position of
the next guidance maneuver.
The following symbols can also be
found on a map screen:
Touch anywhere on the map to
display this button. Select the
memory point symbol to store the
location on the screen as a memory
point.
The system automatically stores the
memory point in the Marked
Point folder/category.
Select one of the categories to
display or to delete the POI icons
from the map. If the POI icons
are currently displayed on the map,
the icons are deleted from the
map and vice versa.
Select the waypoint symbol to enter
a waypoint along the current
route. This allows more than one
destination to be planned at a time.
Touch anywhere on the map to
display the Point of Interest (POI)
screen button on the bottom
right corner of the map screen.
POI Off: Select to remove all of the
POI icons from the map.
Infotainment System
List Categories: Select to display
more POI categories that are
not part of the POI categories listed.
The following screen displays
after List Categories has been
selected. Then, select the category
and sub-category from the list.
To display the POI type on the map,
select the POI or select the Show
screen button.
Show: Select to update the map
screen and the list, once a category
has been selected.
43
Delete: To delete a category:
• To delete the last added POI
category, select the Delete
screen button.
• To delete a specific POI
category:
1. Select the category.
2. Select the subcategory that
was added.
All Local POI’s: Select to display
the list of available POIs. This
list is based on the added POI
categories. The list contains
the POIs within a 32 km (20 mile)
area from the current position of the
vehicle. The list provides the POI
icon, the name, the direction,
and the distance to the POI from
your vehicles current position.
Use the scroll symbols to move up
and down the list. Use the Sort
by DIST. (distance), Icon, Name,
and Route as desired.
Once a POI icon has been selected,
the scroll symbol appears around
the POI icon on the map and
the name of the POI appears on the
display. Select the Info screen
button to display more available
information about the specific point.
44
Infotainment System
Select the back screen button to
return to the previous page.
Select the cancel screen button to
return to the first menu of the
selected option.
Guidance Windows
Single Map Mode
Select the guidance window symbol,
from the map, to display the
guidance window options.
Select the map view symbol to
display more of the map with
a window that gives the direction
and distance to the upcoming
maneuver.
Select from one of the following six
options that allow you different
views and information of the map
screen. Availability of these options
depends on the current route.
Infotainment System
Dual Map Mode
Select the dual view symbol to
display two map screens that allow
different scale levels and heading
directions for each.
Touch anywhere inside the right map
to change the scale level, 2D and 3D
view, and to turn the POIs on and off.
To change the heading direction in
the right map, touch the north up or
heading up symbol.
45
Turn List Mode
Select the turn list symbol to display
the next three upcoming maneuvers.
Directional arrows, street name,
and distance to the next turn
displays. As the vehicle approaches
the next turn, the system
automatically displays a zoomed-in
view of the upcoming maneuver.
46
Infotainment System
Next Turn Mode
Select the arrow guidance symbol to
display the next turn.
A directional arrow, the street name,
and the distance to the next turn
displays. As the vehicle approaches
the next turn, the system
automatically displays a zoomed-in
view of the upcoming maneuver.
Guidance Screen Mode
Freeway Mode
Select the next maneuver symbol to
display only the next maneuver.
Select the highway guidance symbol
to display the following information.
When approaching the next
maneuver, the navigation system
automatically displays this guidance
window.
The upcoming exit number, distance
to the exit, available POIs at the
exit, and a window with direction and
distance to the next maneuver
appears.
Infotainment System
Use the up and down arrows to
scroll through the displayed list. To
view the available POIs for an
exit, select the exit, then select the
Map screen button. The navigation
system displays highway guidance
any time you have a route on a
highway or freeway or you
can select the symbol. To turn this
feature off, see “Navigation Set
Up” under Using the Navigation
System on page 34.
Auto Reroute
When your destination is set and
you are off the planned route,
the system automatically plans a
new route and begins to reroute.
The new route is highlighted on the
screen.
47
Traveling Across Regions
Navigation Menu
If planning to drive across many
states, the region selected
might have to be changed while
travelling to the destination.
To do so:
Select the Menu screen button, from
the map screen, to access the
NAV. (Navigation) MENU.
• Change the selected region in
the search area when getting
closer to the destination.
See Destination on page 63.
• Change the selected region in
the search area when entering
the destination and route
settings. See Destination on
page 63.
For example, traveling from
Michigan to Florida, change the
region currently selected in the
search area to Florida. Enter a
destination in Florida under the
DESTINATION ENTRY menu.
From the NAV. MENU, select
Change Route or Memory Points.
48
Infotainment System
Calculate: After selecting the new
methods, select Calculate to
plan the route with the changes.
The map screen displays.
Change Route
%
Detour
Select this screen button from the
ROUTE OPTIONS screen to access
the DETOUR screen.
Select Change Route to access the
ROUTE OPTIONS menu. The
availability of these screens
depends on if a route is planned or
if you are driving a route. The
following functions can be performed
from this menu:
H
Search Condition
Select this screen button from the
ROUTE OPTIONS screen to access
the SEARCH CONDITION screen.
The search condition screen allows
viewing of the current destination
and to change the planning methods
between each destination. Each
distance between waypoints
and final destination can have an
individual setting.
y / z (Scroll Arrows): Use the
up and down arrows to scroll
through your route.
Quick/Normal/Short: Select one of
the route preference options to
change the planning method.
From this screen, choose to detour
1 mile, 3 miles, or 5 miles around
the current route. The whole
route can be detoured if necessary.
This option is only available while
driving on a planned route.
Infotainment System
F
Route Pref. (Route Preferences)
Select this screen button from the
ROUTE OPTIONS screen to access
the ROUTE PREFERENCES
screen.
c
(Allow Major Roads): This
feature allows the system to
use major roads when calculating a
route.
l (Allow Time Restricted
Road): This feature allows the
system to use time restricted roads
when calculating a route.
49
Use this screen to plan a destination
with waypoints. Five waypoints
and one destination can be entered.
See Dest. & Way Pt. under
“Memory Points” later in this section
for more information on how to
add, edit, and delete.
W (Allow Toll Road): This
feature allows the system to use toll
roads when calculating a route.
b (Allow Ferry): This feature
allows the system to use ferries
when calculating a route.
Touch any of the following options
to turn them on and off. The system
uses the selected settings to plan
the route. The selected route
preference settings appear when
planning a route.
Calculate/ W (Back): Select either
screen button to calculate the
route if a destination has been
entered.
o Dest. & Way Pt. (Destination and
Way Point)
Select this screen button from the
ROUTE OPTIONS screen to access
the DEST. & WAY POINT screen.
Add: Select to add a waypoint or to
change the destination.
Edit: Select to change the order of
the stops in the route and to
change the location of the stops.
50
Infotainment System
Delete/Del. All: These buttons
allow waypoint deletions on
the route or to delete the entire
route.
Reroute/ W (Back): Select either
screen button to calculate the
route based on the selected avoided
maneuvers.
9
Delete: Press to cancel an avoided
turn after the route has been
replanned. A list of all of the avoided
turns displays. Select the street
that you want to add back to
the route. A confirmation window
displays. Select Yes to have
the avoided street added back to
the route. The Turn List screen
displays.
Display route
Turn List: Select to view or to edit
the list of upcoming maneuvers
for the entire route. A list of every
turn on the route displays. With
the turn list displayed, you can
select to avoid streets/turns on the
route.
Select this screen button from the
ROUTE OPTIONS screen to
view the entire planned route on the
map screen.
y / z (Scroll Arrows): Select the
up and down arrow screen
buttons to scroll through the list of
maneuvers.
Avoid: To avoid a street, select the
Avoid screen button next to the turn.
To cancel the avoided turn, select
Avoid again to deselect it.
Del. All (Delete All): Press to
cancel all of the avoided turns after
the route has been replanned. A
list of all of the avoided turns
displays. Select the Del. All screen
button. A confirmation window
displays. Select Yes to have all of
the avoided streets added back
to the route. The Turn List screen
displays.
Infotainment System
G
Route Preview
Select this screen button from the
ROUTE OPTIONS screen to access
the route preview screen.
From this screen, the entire route in
either direction, can be previewed
as well as edit the route.
b S / b { (Scroll to Start): Select
to scroll to the starting position,
previous waypoint, or previous POI
depending on the mode selected.
This button toggles between
slow and fast speed.
51
Edit: Select to change the way the
skip/scroll functions operate. The
skip/scroll can be selected to go to
the start point/destination or to
the next available POI or waypoint.
j
(Pause): Select to pause the
route preview.
T h / | h (Scroll to
Destination): Select to scroll to the
destination, next waypoint, or
next POI depending on the mode
selected. This button toggles
between slow and fast speed.
Use the screen buttons at the
bottom of the screen to move
forward or backward through the
route.
b s (Skip to Start): Select to skip
to the starting position, previous
waypoint, or previous POI
depending on the mode selected.
t h (Skip to Destination): Select
to skip to the destination, next
waypoint, or next POI depending on
the mode selected.
Info (Information): When the
skip/scroll functions are used and
the cursor stops at a POI, this
screen button appears. Press this
screen button to provide information
regarding the POI; name, address,
city, and phone number.
To next Dest. (destination) and
WP (waypoint): Selecting this
option causes the skip/scroll function
to skip/scroll to the next destination
or waypoint.
To next POI: To make this button
available, a POI category must be
selected. Select this option to
skip/scroll to the next available POI,
on the route, for the chosen
category.
52
Infotainment System
Delete: Select to delete the
selected POI category.
Category Selection: Select one of
the categories from the list to
add or replace the current POI
category.
From the STORED LOCATIONS
screen, the following options can be
accessed:
Calculate
Select this screen button, from the
ROUTE OPTIONS screen, to
calculate the route, after any
changes have been made.
under Navigation Menu on page 47
for more information. Memory
points can be stored, edited, deleted
or a category name can be
selected in the four different
categories listed. Once in a
folder/category you can store a
point, edit a point, delete a point,
delete all points, or edit a category
name. Up to 60 memory points
can be stored for each driver.
Cancel Guidance
Select this screen button to cancel
the current set destination. A
confirmation window displays. Select
Yes to cancel the destination;
select No to continue on the current
route.
Memory Points
Selecting Memory Points from the
NAV. MENU will take you to
the STORED LOCATIONS screen.
N Memory Points
Select this screen button from the
STORED LOCATIONS screen
to access the MEMORY POINTS
screen.
This feature allows the ability to
store memory points. Storing
memory points makes these points
easily available to set as a
destination. See “Memory Points”
To store a point:
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
Infotainment System
2. Select one of the
folders/categories listed.
2. Select one of the
folders/categories listed.
3. Select Add.
3. Select the Edit screen button.
53
4. Select the desired method of
entering a destination to enter
the memory point. See
Navigation Menu on page 47 for
more information. A map
screen appears displaying the
selected memory point location.
5. If available, touch the INFO
button to view the address
information of the selected point.
5. Select the Name screen button.
6. Touch OK to store the point as a
memory point.
To edit the name of a stored point:
1. Select the Memory Points
screen button from the STORED
LOCATIONS screen.
4. Select the memory point from
the list.
Use the Dist. (distance), Icon,
Name, and Date screen buttons
to change the sort methods.
6. Use the backspace screen
button to delete the current name
or use the alpha keypad to
make changes.
7. Select the OK screen button to
store the change.
Choose whether or not to have
the name show on the map
screen, next to the POI icon, by
selecting the Show Name On
or Off screen buttons.
54
Infotainment System
To move the memory point from
one folder/category to another:
4. Select the memory point that you
wish to edit.
To modify the position of the stored
point:
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
5. Select the Add Nametag screen
button.
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
2. Select the folder/category the
memory point is stored in.
3. Select the Edit screen button.
6. The system says “Name please.”
State what you would like to call
the memory point.
2. Select the folder/category the
memory point is stored in.
3. Select the Edit screen button.
5. Select the Category screen
button.
7. The system plays back what was
recorded and then asks you to
confirm the nametag. State “Yes“
to confirm the nametag; state
“No” to cancel the nametag and
to try again.
6. Select the new folder/category
button you want to move the
memory point to.
The system displays a message
confirming the move.
Choose whether or not to have the
name show on the map screen,
next to the POI icon, by selecting
the Show Name On or Off
screen buttons.
6. The system displays the map
screen with the destination
marked. Touch the position on
the map to move the memory
point to that location.
To store the point as a nametag:
Del Nametag (Delete): Once a
nametag has been added, the Add
Nametag screen button changes
to Del Nametag.
4. Select the memory point that you
wish to edit.
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
2. Select the folder/category the
memory point is stored in.
3. Select the Edit screen button.
To delete a nametag, press the Del
Nametag screen button. The
nametag is automatically deleted
from that memory point.
4. Select the memory point from
the list.
5. Select the Position screen
button.
7. Select the OK screen button
when the memory point has
been moved to the appropriate
location.
Infotainment System
8. The system returns to the EDIT
MEMORY POINT screen and
displays the new address,
longitude, and latitude for the
memory point.
To change the phone number of a
memory point:
To change the icon associated with
a memory point:
2. Select the folder/category the
memory point is stored in.
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
3. Select the Edit screen button.
2. Select the folder/category the
memory point is stored in.
3. Select the Edit screen button.
4. Select the memory point from
the list.
5. Select the Icon screen button.
6. Select the desired icon.
There are two pages of icons
and a page of icons that
have sounds associated with
them.
7. The new icon displays in the
EDIT MEMORY POINT
screen, next to the Icon screen
button on the map.
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
55
4. Select the memory point from the
list. Use the sort feature to sort
by distance, icon, name, or
date as needed.
4. Select the memory point from the
list.
5. Select the Tel. (telephone)
screen button.
6. Use the numeric keypad to
change the phone number.
7. Select the OK screen button to
store the changed phone
number.
To delete a memory point:
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
2. Select the folder/category the
memory point is stored in.
3. Select the Delete screen button.
5. The system shows the map
screen with the position address
and a pop-up confirmation
message. Select Yes to delete
the point; select No to not delete
the point and to return to the
STORED LOCATIONS screen.
56
Infotainment System
To delete all of the memory points
in a folder/category:
To change the name of the
folder/category:
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
1. Select the Memory Points screen
button from the STORED
LOCATIONS screen.
2. Select the folder/category the
memory points are stored in.
2. Select the folder/category that is
to have a name change.
3. Select the Del.All screen button.
3. Select the Edit Category screen
button.
4. The system displays a pop-up
confirmation message. Select
Yes to delete all the points in the
folder/category; select No to
not delete the points and
to return to the DELETE POINTS
screen.
3 Avoid Area
This feature allows you to store or
delete an area to be avoided,
while on a planned route. Up to
10 points can be stored.
4. Use the q (backspace) screen
button to delete the displayed
name.
5. Use the alpha keypad to input
the name of the folder/category.
6. Select the OK screen button to
save the changes.
To store a point to be avoided:
1. Select the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Select the Add screen button.
Infotainment System
3. Select the desired method of
entering a destination to enter
the area to be avoided. See
Navigation Menu on page 47 for
more information. A map
screen appears displaying the
selected location.
4. If desired, reduce or enlarge the
area around the point to be
avoided by using the reduce or
enlarge keys.
When avoiding locations on
freeways, reduce the avoid area
to the minimum scale. This
produces an X on the map,
rather than a box. This ensures
that the system knows to
avoid the freeway itself, not the
area around the freeway.
5. Select the OK screen button to
store the area.
To edit the name of the point to be
avoided:
1. Select the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Select the Edit screen button.
3. Select the point to be changed
from the list.
57
To edit the position of the point to
be avoided:
1. Select the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Select the Edit screen button.
3. Select the point to be changed
from the list.
4. Select the Position screen
button.
5. Select the map to move the
location.
4. Select the Name screen button.
5. Use the alpha keypad to add
or to change the name.
6. Select the OK screen button to
save the changes.
Choose whether or not to have
the name show on the map
screen, next to the avoided area,
by selecting the Show Name
On or Off screen buttons.
6. If desired, reduce or enlarge the
area around the point to be
avoided by using the reduce or
enlarge keys.
7. Select the OK screen button to
store the area.
To delete a point to be avoided:
1. Select the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Select the Delete screen button.
58
Infotainment System
3. Select the point to be deleted.
Use the scrolling arrows as
needed.
4. The system displays the map
screen with the name of the
point and a pop-up confirmation
message. Select Yes to have
the point deleted; select No to not
delete the point.
$ Dest. & Way Pt. (Destination
To add a waypoint:
and Way Point)
1. Select the Dest. & Way Pt.
screen button from the STORED
LOCATIONS screen.
This feature allows up to five
waypoints to be stored, to the
current route.
3. Using the desired method
of entering a destination,
enter the waypoint. See
Navigation Menu on page 47 for
more information.
A map screen appears with the
waypoint marked.
To delete all of the points to be
avoided:
1. Select the Avoid Area screen
button from the STORED
LOCATIONS screen.
4. Select the o (Waypoint) symbol
on the map screen to save the
waypoint.
2. Select the Del.All screen button.
3. The system displays a pop-up
confirmation message. Select
Yes to have all of the points
deleted; select No to not delete
the points and to return to
the AVOID AREA screen.
2. Select the Add screen button.
From this screen waypoints can be
added, edited, or deleted to the
route.
5. Repeat Steps 1 - 4 to add up to
five waypoints to the route. For
the second through the fifth
waypoints, the system displays
the ADD WAYPOINT screen.
Infotainment System
59
3. Select the Chg. Loc. screen
button from the CHANGE
ORDER screen.
4. From the CHANGE LOCATION
screen, select the point whose
location needs to change.
5. The system displays the map
screen with the destination
marked. Touch the position on
the map, to move the waypoint to
that location.
6. Select the Add screen button,
next to the corresponding
waypoint row, to add the
waypoint.
4. Select the OK screen button to
save the changes.
To change the order of the route:
1. Select the Dest. & Way Pt.
screen button from the STORED
LOCATIONS screen.
1. Select the Dest. & Way Pt.
screen button from the STORED
LOCATIONS screen.
2. Select the Edit screen button.
3. From the CHANGE ORDER
screen, select the names in
the order you would like them to
fall on the route.
To change the location of a
waypoint:
2. Select the Edit screen button.
6. Select the OK screen button to
save your changes. The system
returns to the STORED
LOCATIONS screen.
60
Infotainment System
To delete a waypoint from your
current route:
1. Select the Dest. & Way Point
screen button from the
STORED LOCATIONS screen.
L Home
This feature allows adding, deleting,
or editing a point to be stored as
your home destination.
2. Select the Delete screen button.
2. Select the Edit screen button.
4. The system displays the map
screen with a pop-up
confirmation message. Select
Yes to delete the waypoint; select
No to not delete the waypoint.
3. Touch the map to move the
location of the point.
4. Select the OK screen button to
save the changes.
To delete all of the waypoints on the
route:
2. Select the Del.All screen button.
3. The system displays a pop-up
confirmation message. Select
Yes to delete all of the waypoints;
select No to not delete the
waypoints.
To edit the home destination:
1. Select the L Home screen
button from the STORED
LOCATIONS screen.
3. Select the waypoint/destination
to be deleted.
1. Select the Dest. & Way Point
screen button from the
STORED LOCATIONS screen.
4. Select the OK screen button to
store the destination. The home
icon is highlighted on the
DESTINATION ENTRY screen.
To delete the home point:
To store the home destination:
1. Select the L Home screen
button from the STORED
LOCATIONS screen.
2. Select the Add screen button.
3. Select a destination entry
method. See Navigation Menu on
page 47 for more information.
1. Select the L Home screen
button from the STORED
LOCATIONS screen.
2. Select the Delete screen button.
3. The system displays the map
screen with a pop-up
confirmation message. Select
Yes to delete the home
point; select No to not delete the
home point.
Infotainment System
61
& Previous Dest. (Destination)
To delete all destinations:
To store a preset destination:
This feature deletes one or all
previous destinations that have been
previously entered and automatically
stored.
1. Select the Previous Dest. screen
button from the STORED
LOCATIONS screen.
1. Select the Preset Dests. screen
button from the STORED
LOCATIONS screen.
2. Select the Del.All screen button.
To delete a specific destination:
3. The system displays a pop-up
confirmation message. Select
Yes to delete all of the
destinations; select No to not
delete all of the destinations.
2. Select the Add screen button to
add a preset destination.
1. Select the Previous Dest. screen
button from the STORED
LOCATIONS screen.
2. Select the Delete screen button.
3. Select a destination from the list.
4. The system displays the map
screen with a pop-up
confirmation message. Select
Yes to delete the destination;
select No to not delete the
destination.
A Preset Dests. (Destinations)
This feature adds, deletes, or
changes one of five preset
destinations. Storing preset
destinations makes these
destinations easily available to set
as a destination. See “Preset
Destination” under Navigation Menu
on page 47 for more information
3. Select the numbered preset row
you would like it to appear as.
4. Select a destination entry
method. See Navigation Menu on
page 47 for more information.
5. Select the OK screen button to
store the destination. The
destination is highlighted on the
DESTINATION ENTRY
screen.
62
Infotainment System
To edit the name of a preset
destination:
1. Select the Preset Dests. screen
button from the STORED
LOCATIONS screen.
2. Select the Edit screen button.
3. Select the preset destination to
be edited.
5. Select the OK screen button to
save your changes.
Choose whether or not to have
the name show on the map
screen, next to the preset
destination symbol, by selecting
the Show Name On or Off
screen buttons.
To change the position of a preset
destination:
1. Select the Preset Dests. screen
button from the STORED
LOCATIONS screen.
2. Select the Edit screen button.
3. Select the preset destination to
be changed.
4. Select the Position screen
button.
4. Select the Name screen button
and use the alpha keypad to
edit or add the name.
5. Touch the position on the map,
to move the destination to that
location.
6. Select the OK screen button to
save the changes.
To add or change the phone
number of a preset destination:
1. Select the Preset Dests. screen
button from the STORED
LOCATIONS screen.
2. Select the Edit screen button.
3. Select the preset destination to
be changed.
4. Select the Tel. screen button and
use the numeric keypad to input
or change the phone number.
5. Select the OK screen button to
save the changes.
If a Bluetooth® phone is connected,
touch the V (Send/End Call)
screen button and the system will
call that number.
Infotainment System
63
To delete a preset destination:
2. Select the Del. All screen button.
Destination
1. Select the Preset Dests. screen
button from the STORED
LOCATIONS screen.
3. The system displays a pop-up
confirmation message. Select
Yes to delete all destinations;
select No to not delete all
destinations.
Press the ROUTE key to access the
Destination Entry screen. From
this screen, choose from several
options to plan a route by entering
destination points.
2. Select the Delete screen button.
3. Select the preset destination
to be deleted.
Display Memory Pt. Icons
4. The system displays the map
screen with a pop-up
confirmation message. Select
Yes to delete the destination;
select No to not delete the
destination.
When memory points have been
stored, this screen button displays.
Select this screen button, from
the STORED LOCATIONS screen,
to display memory point icons
on the map screen.
To delete all preset destinations:
Calculate
1. Select the Preset Dests. screen
button from the STORED
LOCATIONS screen.
Select this screen button, from the
STORED LOCATIONS screen,
to calculate the route.
Once the destination entry is
complete, regardless of which
method of entry used, a map
screen with the destination
previewed displays.
64
Infotainment System
Touch the down arrow to select CAN
(Canada). Once the region has been
selected, the region is highlighted on
the map. Touch the back key to
return to the DESTINATION ENTRY
screen. The new selection is stored
after the back screen button is
selected.
Route preferences, route options,
map appearances can be changed,
or a waypoint can be added at
this time. The destination can also
be set without making any further
changes. See “Getting Started
on Your Route” following in
this section for more information on
your choices once a destination
has been entered.
Address
Region
The DESTINATION ENTRY screen
displays a map of the 48 contiguous
United States and a part of
Canada divided into 11 regions.
Before selecting a method of
destination entry, review the search
area map to make sure the
destination is located in the
highlighted region.
Touch the REGION screen button
from the DESTINATION ENTRY
screen to see a list of states included
in the highlighted region, or to
change the region. The SEARCH
AREA screen displays. Touch the
numbered screen button to the left of
the search area map that
corresponds with the numbered
region you wish to select or to view a
list of states included in the region.
The address destination entry
method allows input to an address
by providing the system with a
house number, street name,
and city.
Infotainment System
C
(Address): Touch to access
the ADDRESS screen. At this
point the address can be entered
one of three ways, either house
number first, street first, or city first.
To use the house number first
destination entry method:
1. Touch the numeric keypad to
input the house number.
2. Touch the Street button to enter
the street name using the alpha
keypad.
3. A list of available street names
display if there are less than
five items available. Select the
List screen button at any time to
view the available list. Select
the correct street with the correct
prefix from the list.
4. The system either displays a list
of available cities or goes to the
map screen directly based on
the input.
5. Select the desired city name on
the list.
A map screen appears with the
destination marked.
6. Select the h (destination)
symbol screen button to calculate
the route.
7. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
To use the street name first
destination entry method:
1. Touch the Street screen button
from the address menu and
start entering the street name
using the alpha keypad. A list of
available street names display
if there are less than five
items available. Select the List
screen button at any time to view
the available list.
65
2. Select the desired street name
with the correct prefix from the
list (Dr., Ln., St., etc.).
3. The system will display a list of
available cities. Select the
correct city from the list.
4. The numeric keypad displays,
allowing you to enter the
house number.
5. Press OK.
A map screen appears with the
destination marked.
6. Select the h (destination)
symbol screen button to calculate
the route.
7. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
66
Infotainment System
To use the city name first destination
entry method:
1. Touch the City button.
2. Select from the choices shown
on the city screen; Any City, 5
near cities, Input City Name,
or from the Last 5 Cities used.
• Any City — The system takes
you back to the house
number first entry method.
Select a city from the list.
• 5 near cities — The system
displays the 5 cities nearest
your current position. Select a
city from the list.
• Input City Name — The
keypad displays for inputting
the city name. Input the
city name and then select the
city from the list.
• Last 5 Cities — The city
names of the last five
cities that were stored as a
previous destination displays.
Select a city from the list.
3. If using the alpha keypad, finish
entering the city name and then
touch the List screen button
to display a list of available cities.
Choose a city from the list. If
choosing from one of the
prior mentioned lists, select the
city from the list displayed.
4. The House number screen
displays. Enter the house number
using the numeric keypad.
5. Select the Street screen button
from the address menu and
start entering the street name
using the alpha keypad. A list of
available street names displays
if there are less than five
items available. Select the List
screen button at any time to view
the available list.
6. Select the desired street name
with the correct prefix (Dr., Ln,
St., etc.) from the list
A map screen appears with the
destination marked.
7. Select the h (destination)
symbol screen button to calculate
the route.
8. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
Infotainment System
Point of Interest (POI)
To input the POI name:
The Point of Interest (POI)
destination entry method allows a
destination to be chosen from
the POI list.
1. Use the alpha keypad to enter
the POI name.
Touch Sym. (symbol) to select
symbols and numbers for
the POI, touch Others to select
special characters for the POI, or
touch A - Z to return to the
alpha keypad.
A list of POIs appear using the
information from the alpha
keypad input. A list of available
POIs displays if there are
less than five POIs available.
Touch the List screen
button at any time to view
the available POIs.
i
(Point of Interest): Touch to
access the POINT OF INTEREST
screen. From this screen there
are three options to select/enter the
destination. Either input the name
using the keypad, select a category
from the category list, or select
the city by selecting the city screen
button.
2. Select the desired POI from
the list.
A map screen appears with the
destination marked.
3. Select the h (destination)
symbol screen button to calculate
the route.
67
4. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
To select a POI from a category:
1. Touch the Category screen
button from the POINT OF
INTEREST screen to view a list
of POI categories.
2. Select a category, and then a
sub-category.
3. The system displays available
POIs names in the selected
sub-category or if the list is too
long the system displays the
alpha keypad.
4. If the alpha keypad displays,
input the POI name until a
list of available POIs appear.
The List screen button can also
be selected when it becomes
available.
68
Infotainment System
5. Select the POI from the list.
A map screen appears with
the destination marked.
6. Select the h (destination)
symbol screen button to calculate
the route.
7. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
To select a POI by inputting a city
name:
1. Select the city screen button,
then select; Any City, 5 near
cities, Input City Name, or from
the Last 5 Cities used.
• Any City — The system takes
you back to the house
number first entry method.
Select a city from the list.
• 5 near cities — The system
displays the 5 cities nearest
your current position. Select a
city from the list.
• Input City Name — The
keypad displays for inputting
the city name. Input the
city name and then select the
city from the list.
• Last 5 Cities — The city
names of the last five
cities that were stored as a
previous destination displays.
Select a city from the list.
2. Use the alpha keypad to enter
the POI name.
Touch Sym. (symbol) to select
symbols and numbers for
the POI, touch Others to select
special characters for the POI, or
touch A - Z to return to the
alpha keypad.
3. A list of POIs appear using the
information from the alpha
keypad input. A list of available
POIs display when there are less
then five POIs available. Touch
the List screen button at any time
to view available POIs.
4. Select the desired POI from
the list.
A map screen appears with the
destination marked.
5. Select the h (destination)
symbol screen button to calculate
the route.
6. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
Map
The map destination entry method
allows a destination to be chosen by
scrolling on the map.
Infotainment System
Once the scroll symbol is on the
location, the address information
displays on the map screen.
4. Touch the destination screen
button or the waypoint screen
button to save the address as a
destination or waypoint.
69
Intersection
The intersection destination entry
method sets two intersecting streets
as the destination.
• If select this position as a
I (Map): Touch this screen button
from the DESTINATION ENTRY
screen to enter the map destination
entry method, then:
1. Touch the map for the desired
area to be set as the destination.
2. Use the zoom in/out function
to view the direction of the
desired area.
3. Pressing/holding and dragging on
the map activates fast scrolling.
Press/touch once on the area to
which you would like to move the
current position mark.
waypoint, the point is
stored as a waypoint. The
system displays the STORED
LOCATIONS screen. See
“Memory Points” under
Navigation Menu on page 47
for more information.
• If select the h (destination)
symbol screen button the
system calculates the route.
Select the Guide screen
button to start route guidance.
See “Getting Started on
Your Route” later in this
section for more information.
M
(Intersection): Touch to access
the INTERSECTION screen.
To use the intersection destination
entry method:
1. Enter the first of two streets in
the intersection. The List
option may become available.
70
Infotainment System
2. Choose a street from the list, or
continue to spell the street name
to further reduce the number of
available items. Select the street
with the correct prefix (Dr., Ln.,
St., etc.).
3. After the first street has been
chosen, enter the second
street name. The List option may
again become available.
4. Now choose the second street
from the list, or continue to spell
the street name to further reduce
the number of available items.
Select the street with the correct
prefix (Dr., Ln., St., etc.).
After both streets have been
chosen, a map screen appears
with the destination marked.
5. Select the h (destination) symbol
screen button to calculate the
route.
6. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section for
more information.
Phone Number
The phone number destination entry
method allows a destination to be
chosen by entering a phone number.
The phone number must be in the
list of POIs, that is contained on the
map DVD, in order for the system
to retrieve the destination.
To use the phone number
destination entry method:
1. Input the area code and phone
number of a POI using the
numeric keypad. Only business
phone numbers can be
entered.
2. If the phone number can be
found on the map DVD, a
map screen appears with the
destination marked.
3. Select the h (destination)
symbol screen button to calculate
the route.
4. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
U
(Phone Number): Touch to
access the PHONE NUMBER
screen.
Infotainment System
Freeway Entrance/Exit
The freeway entrance/exit
destination entry method allows a
destination to be chosen by entering
a freeway entrance or exit point.
K (Freeway Entrance/Exit):
Touch to access the FREEWAY
ENT/EXIT screen.
To use the freeway entrance/exit
destination entry method:
1. Touch the Freeway screen
button and enter the freeway
name. Be sure to use
abbreviations, such as I - 75,
rather than spelling out Interstate.
Touch Sym. to view a list of
symbols to add when entering a
freeway name, touch Others
to view a list of special
characters that can be chosen,
or touch A - Z to return to
the alpha keypad.
A list of freeways appear.
2. Choose a freeway from the list,
and then touch the Entrance or
Exit screen button to choose
a point.
Choose an exit/entrance point
from the list of names that
appear.
Input the exit/entrance by name.
Touch the Input Name screen
button. If the freeway exit or
entrance name is input, the alpha
71
keypad displays. Touch the alpha
keypad to enter the freeway exit
or entrance name.
The list can be sorted by
distance or name. Touch the
Name Sort screen button to sort
the list by name. Touch the
Dist. Sort screen button to have
the list sorted by distance.
The distance sort list is based on
the current position of the
vehicle.
After choosing a point from the
list, a map screen appears
with the destination marked.
3. Select the h (destination) symbol
screen button to calculate the
route.
4. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
72
Infotainment System
Emergency
The emergency destination entry
method allows a destination to
be entered by choosing from three
categories.
To use the emergency destination
entry method, when no route
has been planned:
To use the emergency destination
entry method, when a route has
been planned:
1. Select a category.
1. Select a category.
2. Select a destination point from
the list. Touch the Name Sort
screen button to sort the
list by name, or Dist Sort to sort
the list by distance from the
vehicle’s current position.
After selecting a destination from
the list, a map screen appears
with the destination marked.
2. The system automatically
changes the current planned
route destination to include the
nearest emergency category that
has been selected.
3. Select the h (destination) symbol
screen button to calculate the
route.
|
(Emergency): Touch to access
the EMERGENCY screen. When
in this screen, the system displays
the current position address and
the longitude and latitude
information.
4. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
3. Select the h (destination)
symbol screen button to calculate
the route.
4. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
Infotainment System
Memory Points
The memory points destination entry
method allows a destination to be
chosen from a list of points that
were previously stored.
N (Memory Point): Select
this screen button from the
DESTINATION ENTRY screen to
access the MEMORY POINTS
screen.
To use this destination entry
method:
1. Select the category/folder in
which the memory point has
been stored. Select from
PERSONAL, BUSINESS,
ENTERTAINMENT, or MARKED
POINT folders.
Sort the list by distance, icon,
name, or date stored.
2. Select the desired memory point.
A map screen appears with the
destination marked.
3. Select the h (destination)
symbol screen button to calculate
the route.
73
Previous Destination
The previous destination entry
method allows a destination to be
chosen from a list of previous
destination points.
4. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
h
(Previous Destination): Touch
to access the PREVIOUS DEST.
screen. The system stores up to
100 points that have been previously
entered. As new destinations are
entered, the system automatically
deletes the oldest destinations and
adds the new destination.
74
Infotainment System
To use the previous destination
entry method:
Name: Touch to sort the list by
name.
1. Choose a previous destination
from the list. Use the arrow to
the right of the destination to view
the entire destination name as
necessary.
A map screen appears with the
destination marked.
Date: Touch to sort the list by the
date the destination has been
entered. The list will be in order by
the latest to the oldest destinations
that have been entered.
2. Select the h (destination)
symbol screen button to calculate
the route.
3. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
Coordinates
The coordinates destination entry
method allows a destination to
be chosen by entering latitude and
longitude coordinates.
Previous Start Point: Touch this
screen button for the system to plan
a route to the previous point you
were at when a route was entered.
This option is available while the
vehicle is moving.
)
(Coordinates): Touch to
access the COORDINATES screen.
To use the coordinates destination
entry method:
1. Touch N or S next to LAT. to
enter the direction of the
latitude coordinate.
Infotainment System
2. Input the numeric portion of the
latitude coordinate using the
keypad.
3. Touch E or W next to LONG. to
enter the direction of the
longitude coordinate.
4. Input the numeric portion of the
longitude coordinate using the
keypad.
5. Once both coordinates are
entered, touch the OK screen
button.
A map screen appears with the
destination marked.
j
6. Select the h (destination)
symbol screen button to calculate
the route.
7. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
A map screen appears with the
destination marked and the
number of the preset destination.
Preset Destination
(Preset Destination): The
preset destination entry method a
destination to be set by selecting
from one of five previously stored
destinations. Besides home, these
are the only destinations available to
set while the vehicle is moving or by
voice recognition. If a destination is
not set for one of the screen buttons,
the button dims and becomes
unavailable. See “Memory Points”
under Navigation Menu on page 47
for more information.
To use the preset destination entry
method:
1. Select the desired preset
destination from the
DESTINATION ENTRY screen.
The screen buttons are
numbered 1 - 5.
75
2. Select the h (destination) symbol
screen button to calculate the
route.
3. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
Home
L
(Home): This feature allows you
to plan a route to one previously
stored destination that you
have selected as home. If a home
destination is not stored, the
home button becomes unavailable.
In addition to preset destinations
one through five, this destination is
available to set while the vehicle
is moving or by voice recognition.
76
Infotainment System
To use this destination entry
method:
1. Select the home screen button
from the DESTINATION ENTRY
screen.
A map screen appears with the
destination marked.
Getting Started on Your Route
Once a destination has been
entered, one of the following options
can be used:
o
(Waypoint): Touch to enter this
point as a waypoint along the
route. See Dest. & Way Pt. under
“Stored Locations” under Navigation
Menu on page 47 for more
information.
Route Preference: Touch to
access the Route Preference screen
and adjust the route preferences.
The current setting displays in
the Route Preference section of the
Map screen. See “Change Route”
later in this section for more
information.
2. Select the h (destination)
symbol screen button to calculate
the route.
3. Select the Guide screen button
to start route guidance.
See “Getting Started on Your
Route” later in this section
for more information.
h
(Destination): Touch to set the
entered destination as it is,
without further adjustment.
If any of these features are turned
off, there will be a diagonal red
line through its icon.
Once the route preference has been
set, select the destination symbol
and the system automatically
calculates the route.
Infotainment System
Three Routes
To access this screen, touch the
3routes button on the map screen
while planning a destination.
From this screen select Guide to
start the route guidance or
select 3 routes if available to select
between Quick, Normal, or Short
route options. The Chg. Route
screen button can also be selected
to go to the ROUTE OPTIONS
menu and select from the available
options.
When applicable, the system
calculates up to three different
versions of the current route in three
different colors: Quick, Normal,
and Short. The routes are shown
with distance to destination and
estimated travel time.
77
The quickest route may not be the
shortest, and vice versa. When
an optional route is selected
it is shown on the map in another
color.
Touch Info on the three routes
screen to access the INFO FOR
3 ROUTES screen. From this
screen, view the following
information for the different planned
routes:
G (Estimated Travel Time):
Shows the route’s estimated time
of travel.
78
Infotainment System
J
(Straight-Line
Distance): Shows the route’s
straight-line distance to destination.
W (Toll Road): Shows the
route’s toll road distance
information.
c
(Freeway Travel): Shows the
route’s freeway distance information.
Head-Up Display
When a route is planned the
Head-Up Display (HUD) displays
information when the vehicle
is approaching a turn. This
information displays when the
vehicle is 0.80 km (0.5 mi) away
from a turn in residential areas and
2.0 km or 2.0 mi away from a
turn on freeways.
b (Ferry): Shows the route’s
ferry distance information.
C. Street Name Line — Displays
the name of the street that the
vehicle will be turning on.
D. Mile/Kilometer Scale — Indicates
the scale of the distance bar. The
scale is 0.80 km (0.5 mi) in
residential areas and 2.0 km or
2.0 mi on freeways. This value
will not change while approaching
the turn.
After completing a turn, the HUD
displays the name and distance of
the next street the vehicle will
be turning on for 10 seconds. See
Head-Up Display (HUD) in the Index
of the vehicle’s owner manual for
more information.
{ (Time-Restricted
Roads): Shows the route’s
time-restricted road information.
A. Directional Arrow — Displays the
direction of the next turn.
B. Distance Bar — Decreases as
the vehicle approaches the turn.
Infotainment System
OnStar® System
With an active OnStar® subscription
with personal calling, telephone
calls can be made from the vehicle,
using the navigation system
screen to enter the numbers.
Q (OnStar): Touch the AUX hard
key to access this button. Touch this
screen button to access the OnStar®
phone screen. This screen is not
available while driving.
V
(Place/End Call): Touch to
place the phone call. While in a call,
this button is red. Touch this button
to end the call.
Tone Send: Touch to send touch
tone data. This button is available
during a phone call. This function is
used when numbers in response
to an automated phone request
need to be entered, such as when
checking voice mail or when
asked to choose menu items.
Incoming Call: When receiving an
incoming call, a pop-up message
displays on the screen with two
place/end call screen buttons, one
green and the other red. Touch
the green button to answer the call.
Touch the red button to reject
the call.
When using the OnStar® system,
the audio system mutes. The
volume of an OnStar® call can be
adjusted by using the steering wheel
controls or the volume knob on
the navigation system. See
“OnStar® System” in the Index of
the vehicle’s owner manual for more
information.
79
Using the OnStar® Screen to
Make a Phone Call
To make a phone call using the
OnStar® screen:
1. Press the AUX hard key.
2. Touch the OnStar® screen
button.
3. Enter the phone number using
the numeric keypad.
4. Touch the place/end call screen
button to place the phone call.
5. If the tone send button is used to
check voice mail or to respond to
an automated request, enter
the appropriate number(s) using
the keypad and then touch
the tone send button. Once that
set of numbers has been
sent, the tone send button dims
until another set of numbers
is entered on the keypad.
6. To end the call, touch the
place/end call screen button. This
button is red while the call is
active.
80
Infotainment System
Configure Menu
Screen Appearance
z (Screen Appearance): Touch
to access the appearance screen
menu.
navigation system screen to a
lighter background for better viewing
in the daytime. Night mode
changes the navigation system
screen to a darker background for
better viewing at night. Auto
mode adjusts the screen
automatically depending on exterior
lighting conditions.
_
Press the CONFIG hard key to
access this menu, allowing
adjustment of several of the
systems features and preferences.
Bluetooth®
E
(Bluetooth®): Touch to access
the Bluetooth® setup screen. See
Bluetooth on page 102 for more
information on the Bluetooth®
system.
(Contrast): Adjusts the contrast
of the navigation screen. Touch
the plus (+) or minus (−) signs on
either side of the contrast bar graph
to increase or decrease the
contrast.
]
From this menu, several options
may be adjusted:
Color Scheme: Choose between
three different screen color schemes
by touching 1 (blue), 2 (green), or
3 (brown).
Color Mode: Adjusts the screen
mode between Auto, Day, and
Night. Day mode changes the
(Brightness): Adjusts the
brightness of the navigation screen.
Touch the plus (+) or minus (−)
signs on either side of the brightness
bar graph to increase or decrease
the brightness.
Screen OFF: Turns the navigation
screen off. Touch any hard key
to turn the screen back on.
Infotainment System
Navigation Set Up
3 (Navigation Set Up): Touch
to access the NAVIGATION SET
UP screen.
81
view. When changing the map to
the 3-dimensional view, use
the up/down arrows to change the
angle of the map. Select Default
to return to the factory settings
(2-dimensional).
To set the Quick POI selection:
1. Select the Quick POI Selection
screen button.
From this menu, several options are
available for adjustment:
8
2D/3D View: Changes the
view of the map screen and
the guidance screen between a
2-dimensional and 3-dimensional
2. Select the sub-category to be
replaced.
C
Quick POI Selection: Sets
six Point of Interest (POI) categories
that can be selected from while
driving.
3. Select a Quick POI category
from the Quick POI selection
menu list.
82
Infotainment System
4. Pick the subcategory from the list
that appears.
The system automatically returns
to the Quick POI Selection
screen. The category changes
are now saved.
To change back to the system
generated choices, touch
the Default screen key.
5
Calibration: Recalibrates the
navigation system.
The Calibration screen adjusts the
vehicle’s position or the vehicle
speed signal.
Once the process of changing
the vehicle’s current position
is complete, the map screen
displays with rotate arrow screen
buttons around the vehicle.
To correct the position of the vehicle
on the map (for example, if your
vehicle has been shipped) or
to change to the current position.
1. Select the Position/Direction
screen button.
The map screen displays with
the vehicle’s current position.
2. To change the vehicle’s position,
touch the map screen.
Use the zoom in/out function to
view the direction of the
desired area.
Pressing/holding and dragging
on the map activates fast
scrolling. Press/touch once on
the area to which you would like
to move the current position
mark.
3. Touch the OK screen button
once the vehicle is in the
current position.
If a route had already been set,
the map screen displays,
select Guide to change the route
to the vehicle’s new position.
4. To change the direction of the
vehicle, press either arrow
screen button to rotate the
vehicle to the correct direction.
5. Once the vehicle is facing the
correct direction, select the
OK screen button.
See Problems with Route Guidance
on page 89 for more information.
If there are tire pressure differences
or a spare tire is installed, the
system automatically recalibrates
the system, but it may take longer.
To calibrate the vehicle speed
signal, touch the Distance screen
key. See Vehicle Positioning
on page 89 for more information.
J
User Settings: Turns several
other route guidance setting options
on or off.
Infotainment System
83
Guidance Screen: This option
turns the guidance screen on and
off. When the guidance screen
option is on, the guidance screen
will pop-up when approaching
a turn.
Adjustments from this screen:
Notify traffic restriction: This
option instructs the system to notify
when the current route has traffic
restrictions (e.g. winter time).
Arrival Time G (Time of Arrival):
This option displays the estimated
time of arrival to the destination.
Arrival Time \ (Time to
Destination): This option displays
how much time remains to reach
the destination.
Freeway Information: When on,
this option automatically displays
freeway information in the guidance
window while on a freeway during
route guidance. Select the Off
screen button to not display this
guidance window.
Text size on map: Adjusts the text
size on the map between Large,
Medium, and Small. This option is
located on the second page of
the USER SETTINGS screen.
Touch the down arrow to access
this option.
\ Restore System Defaults:
Select this option from the
NAVIGATION SET UP screen to
change all adjustable system
settings to factory defaults.
Average Speed: Sets the average
speed to default. The system
monitors the speed on different roads
and updates the average speed the
vehicle travels at. This average
speed is used to calculate the time it
takes to reach the destination when a
route is set.
84
Infotainment System
See Personalization on page 101 for
more information on language
and personal settings and see
“Memory Settings” later in this
section.
Adjustments from this screen:
>
Volume: Adjusts the volume of
voice guidance prompts and the
voice recognition system. Voice
guidance prompts can also
be turned off.
Vehicle
Vehicle: Touch to access the
vehicle information menu. From
this menu, adjust such options as
the language, personal settings,
and memory options.
12Hour: Touch to display the time
in standard AM/PM format.
Clock
H
(Clock Adjust): Touch and hold
this screen button in the upper
right corner of the screen to access
the Clock Adjust screen and
adjust several time features.
24Hour: Touch to display the time
in military format.
AM: Touch when setting the time
in AM.
PM: Touch when setting the time
in PM.
Infotainment System
PST, MST, CST, EST: Touch one
of these screen buttons to choose
between Pacific Standard Time
(PST), Mountain Standard Time
(MST), Central Standard Time
(CST), and Eastern Standard
Time (EST).
GPS TIME: Touch to match the
navigation system’s time to
GPS time.
Daylight Savings: Touch to
increase the time by one hour.
Touch this screen button again to
turn this feature off and decrease
the time by one hour.
y / z: Touch the up arrow to
increase the hour or minutes. Touch
the down arrow to decrease the
hour or minutes.
Memory Settings
If the vehicle has the memory
feature, memory settings for the
following features, for up to
two drivers, can be programmed
and recalled:
• The driver seat position.
• The outside rearview mirrors
position.
• The telescopic steering column
position.
• The language, radio and XM™
presets, tone, volume, playback
mode (AM/FM or CD), last
displayed stations, and CD
position are set automatically.
85
• The last climate control setting is
set automatically.
• The Head-Up Display (HUD)
position, if equipped, is set
automatically.
• The navigation systems previous
destinations, stored memory
points, nametags, paired phones,
navigation voice prompts, etc.
are stored automatically.
• Other personalization settings,
for example, remote start
settings.
86
Infotainment System
Memory Infotainment Settings
and Presets
Store Memory Settings
These settings and presets are set
automatically. They include:
•
•
•
•
•
•
3. Press the CONFIG hard key.
4. Adjust the settings for the driver
seat, the outside mirrors, and
the steering column to a
comfortable driving position or
exit position.
Radio presets
Navigation
Address Book
Language
HUD display
Climate control settings
For more information, see each item
in the Index of the vehicle’s owner
manual.
Memory features are programmed
and recalled through the navigation
system and the voice recognition
system.
numbers on the back of the
keyless access transmitters
correspond to the driver number.
Displayed on Configure Menu
To store memory settings:
1. Be sure the ignition is either on,
in accessory mode, or in RAP.
The vehicle must be stopped
and/or the shift lever must be in
P (Park).
2. Press any button on the
appropriate keyless access
transmitter to identify yourself as
Driver 1 or Driver 2. The
5. Push and hold either the Driver 1
or Driver 2 screen buttons to
store the driving positions. Push
and hold the Set Exit screen
button to store the exit position.
Two beeps are heard to
confirm that the driver or exit
position is stored.
The memory settings are now
programmed. Any changes that
are made to the Head-Up Display
(HUD), navigation system, and
climate controls while driving
automatically stores when then
ignition is turned off.
Infotainment System
Recall Memory Settings
To recall memory settings:
1. Be sure the ignition is either on,
in accessory mode, or in RAP.
The vehicle must be stopped
and/or the shift lever must be in
P (Park).
2. Press the CONFIG hard key.
3. Push and release either
the Driver 1 or Driver 2 screen
buttons to recall the driving
positions. Push and release the
Set Exit screen button to
recall the exit position.
If the vehicle is in P (Park), a
beep is heard and your
previously saved driving position
or exit position is recalled. If
the vehicle is not in P (Park),
three beeps are heard and your
previously saved driving
position or exit position will not
be recalled.
A memory recall can be stopped
by pressing any memory seat or
mirror position button. To have
the stored driving positions
recalled when unlocking the
vehicle with the keyless access
transmitter or when starting the
vehicle, see “Occupant Position”
under Personalization on
page 101 for more information.
Magnetic Ride Control
(Vehicles without Enhanced
StabiliTrak®)
If the vehicle has this feature, select
between the following screen
buttons:
Touring: Select this screen button
for normal city and highway
driving. This setting provides a
smooth, soft ride.
Performance: Select this screen
button when road conditions or
personal preference demand more
control. This setting provides
more “feel” or response to road
conditions.
87
Active Steering and Magnetic
Ride Control (Vehicles with
Enhanced StabiliTrak®)
If the vehicle has this feature, select
between the following screen
buttons:
Touring: Select this screen button
for normal city and highway driving.
This setting provides a smooth, soft
ride with less sensitive steering and
requires lower steering efforts than
the Performance Mode.
This mode is not available when the
Enhanced StabiliTrak® Stability
Competitive mode has been selected
through the traction control button.
See “Enhanced StabiliTrak®” in the
Index of the vehicle’s owner manual
for more information.
Performance: Select this screen
button when road conditions or
personal preference demand more
control. This setting provides
more “feel” or response to road
conditions and quicker steering
response.
88
Infotainment System
Global Positioning
System (GPS)
The navigation system determines
the position of the vehicle by
using satellite signals, various
vehicle signals, and map data.
At times, other interferences such
as the satellite condition, road
configuration, the condition of the
vehicle and/or other circumstances
can interfere with the navigation
system’s ability to determine
the accurate position of the vehicle.
The GPS shows the current
position of the vehicle using signals
sent by the GPS Satellites of the
United States Department of
Defense. When the vehicle is not
receiving signals from the satellites,
a symbol appears on the map
screen. Refer to Navigation Symbols
on page 39.
This system may not be available or
interferences may occur if:
• Signals are obstructed by tall
buildings, trees, large trucks,
or a tunnel.
• Objects that are placed on top of
or near the instrument panel.
• Satellites are being repaired or
improved.
• After-market glass tinting has
been applied to the vehicle’s
windshield.
Notice: Do not apply after-market
glass tinting to the vehicle’s
windows. Glass tinting interferes
with the system’s ability to
receive GPS signals and causes
the system to malfunction.
The window might have to be
replaced to correct the problem.
This would not be covered by
the warranty.
For more information if the GPS is
not functioning properly, see
Problems with Route Guidance on
page 89 and If the System
Needs Service on page 90.
Speed Advisory
The Speed Advisory system allows
the driver to view posted speed
limits and advisory speed
information. This information comes
from the navigation map disc.
The navigation system only works
as well as the information provided
from that disc.
The navigation system uses GPS to
determine the vehicle’s location
within the navigation map disc. This
information is then downloaded
to the Speed Advisory message
area, which is located and displayed
in the DIC or HUD. See “DIC
Operation and Displays” and “Speed
Advisory” in the index of the
vehicle’s owner manual for more
information.
Infotainment System
Vehicle Positioning
At times, the position of the vehicle
on the map may be inaccurate
due to one or more of the following
reasons:
• The road system has changed.
• The vehicle is driving on slippery
road surfaces such as in sand,
gravel and/or snow.
• The vehicle is traveling on
winding roads.
• The vehicle is on a long
straight road.
• The vehicle is approaching a tall
building or a large vehicle.
• The surface streets run parallel
to a freeway.
• The vehicle has just been
• The vehicle changes directions
more than once, or when the
vehicle is turning on a turn table
in a parking lot.
• The vehicle is entering and/or
exiting a parking lot, garage
or a lot with a roof.
• The GPS signal is not received.
• A roof carrier is installed on
your vehicle.
• The vehicle is equipped with tire
chains.
• The tires are replaced.
• The tire pressure for your tires is
incorrect.
• The tires are worn.
• The first time the map DVD is
inserted.
transferred by a vehicle carrier or
a ferry.
• The battery is disconnected for
• The current position calibration is
• The vehicle is driving in heavy
set incorrectly.
• The vehicle is traveling at high
speed.
several days.
traffic where driving is at low
speeds, and the vehicle is
stopped and started repeatedly.
89
If these problems are experienced
with the system, the system
might need to be recalibrated. This
may be due to tire pressure
differences, or if a spare tire is
installed. To calibrate the system,
see “DIC Compass” in the vehicle’s
owner manual.
Problems with Route
Guidance
Inappropriate route guidance may
occur under one or more of the
following conditions:
• The vehicle has not turned onto
the road indicated.
• Route guidance may not be
available when using automatic
rerouting for the next right or
left turn.
• The route may not be changed
when using automatic rerouting.
• There is no route guidance when
turning at an intersection.
• Plural names of places may be
announced occasionally.
90
Infotainment System
• It may take a long time to
operate automatic rerouting
during high-speed driving.
• Automatic rerouting may display
a route returning to the set
waypoint if you are heading for a
destination without passing
through a set waypoint.
• The route prohibits the entry of a
vehicle due to a regulation by
time or season or any other
regulation which may be given.
• Some routes may not be
searched.
• The route to the destination may
not be shown if there are new
roads, if roads have recently
changed or if certain roads are
not listed on the map DVD.
See Maps on page 36.
To recalibrate the vehicle’s position
on the map, see “DIC Compass”
in the vehicle’s owner manual.
If the System Needs
Service
If the navigation system needs
service and the steps listed here
have been followed but there are still
problems, see your dealer/retailer
for assistance.
Ordering Map DVDs
The map DVD in the vehicle is the
most up-to-date information
available when the vehicle was
produced. The map DVD is updated
periodically, provided that the
map information has changed.
For any questions about the
operation of the navigation system
or the update process, contact
the GM Nav Disc Center toll-free
phone number, 1-877-NAV-DISC
(1-877-628-3472) or go to the
center’s website, gmnavdisc.com.
For any updates or replacements,
call the GM Nav Disc Center or
order a new disc online. Have the
Vehicle Identification Number (VIN)
available when ordering to ensure
the correct and most up-to-date DVD
map disc for the vehicle is sent. See
“Vehicle Identification Number (VIN)”
in the Index of the vehicle’s owner
manual for more information.
After receiving the updated disc,
replace the old disc in the navigation
system. See “Installing the DVD
Map Disc” and “Ejecting the
DVD Map Disc” under Maps on
page 36. Dispose of the old disc to
avoid confusion about which
disc is the most current.
Database Coverage
Explanations
Coverage area depends upon the
map detail available. Some
areas have greater map detail than
others. The navigation system
works only as well as the information
provided on the map disc. See
Ordering Map DVDs on page 90 on
how to obtain updated map
information.
Infotainment System
Voice Recognition
The navigation system’s voice
recognition allows for hands-free
operation of navigation, phone,
audio system, climate controls,
windows, OnStar®, and memory
features. This feature only works if
the map DVD is inserted. See
“Installing the DVD Map Disc” under
Maps on page 36.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active.
See “Retained Accessory Power
(RAP)” in the Index of your vehicle’s
owner manual for more information.
To use voice recognition:
While in the navigation screens,
the system displays a symbol
(|) while the voice recognition is
active.
2. Clearly state one of the
commands listed on the following
pages.
Helpful Hints for Stating
Commands
• When a multiple command is
available, choose the command
that best works for you.
• Words that are in brackets are
optional. For example, for the
command Radio [band] [select]
FM, stating Radio FM or
Radio select FM are both valid
commands.
• When the system recognizes the
1. Push and hold the talk symbol
steering wheel control until a
beep is heard. The audio system
mutes.
command the system:
− Either performs the function
− Asks you to confirm your
choice by clearly stating
“yes or no”
91
− Issues an error message such
as “System does not
recognize this command” or
direct you to “Please start
speaking after the beep”
• If the system is not yet ready, the
system may state “System is
checking the disc. Please wait.”.
• To cancel a command or if
the system response does
not match the verbal command,
press and hold the talk symbol
button. The system replies,
“System will cancel the voice
recognition”.
• If difficulty with the system
recognizing a command is
experienced, try saying it more
softly, and wait for a few seconds
after the beep, or you may just
try saying it again.
92
Infotainment System
• Background noise may cause
voice commands to be
misunderstood, including airflow
noise from wind.
• To use the voice recognition
system, the map DVD must
be loaded.
This system is able to recognize
commands in five different
languages. The system only
recognizes commands based on the
language selected.
The Command List shows a list of
available voice recognition
commands to use. Touch the
Command List screen button and
then touch one of the buttons on the
right of the screen to choose the
commands to view. Use the up and
down arrows to scroll through
the list of commands.
While in the help menu, selection
can be made from two screens, the
Command List and the Operating
Guide.
DVD: Touch to display the list of
DVD commands.
Heater: Touch to display the list of
climate control commands.
Disp. (Display): Touch to display
the list of display commands.
Phone: Touch to display the list of
phone commands.
Nametag: Touch to display the list
of nametag commands.
Voice Recognition Help
Help commands can be displayed
on the screen while the vehicle
is stopped. When the vehicle
is moving, the system lets you know
that this command is not available
while driving. To enter the help
screens, clearly state one of the help
commands.
CD: Touch to display the list of CD
commands.
Navi (Navigation): Touch to
display the list of navigation
commands.
Radio: Touch to display the list of
radio commands.
Etc.: Touch to display the list of
miscellaneous commands, such as
OnStar®, windows, and
personalization.
The Operating Guide screen gives
step-by-step directions for using
the voice recognition feature. Touch
the Operating Guide screen
button and then touch one of the
buttons on the right of the screen to
choose the instructions to list.
Use the up and down arrows to
scroll through the instructions.
Infotainment System
Audio: Touch to display instructions
on how to use the radio commands.
Nametag: Touch to display
instructions on how to use and store
a nametag.
Voice Recognition Commands
Start: Touch to display instructions
on how to start using the voice
recognition system.
Cancel: Touch to display
instructions on how to cancel a
command, what to do in case of an
error, and other helpful hints.
Dest. (Destination): Touch to
display instructions on how to use
voice recognition to plan a route
or how to use the destination
command list.
The following list shows all of the
voice commands available for
the navigation system with a brief
description of each. The commands
are listed with the optional words
in brackets. To use the voice
commands, refer to the instructions
listed previously.
Display Commands
Display [set] English units:
Instructs the system to switch to
English units of measurement.
All display settings change.
Display [set] metric units: Instructs
the system to switch to metric
units of measurement. All display
settings change.
93
Display [set] day mode: Instructs
the system to switch the system
display to day mode. See “Screen
Appearance” under Configure
Menu on page 80 for more
information.
Display [set] night mode: Instructs
the system to switch the system
display to night mode. See “Screen
Appearance” under Configure
Menu on page 80 for more
information.
Display [set] auto mode: Instructs
the system to switch the system
display to auto mode. See “Screen
Appearance” under Configure
Menu on page 80 for more
information.
Display Help: Instructs the system
to offer assistance with the
previously listed display commands.
The Navigation System displays
the commands on the screen.
94
Infotainment System
General Navigation Commands
Map Commands
Point of Interest (POI) Commands
Navigation [show] current
position, navigation [show]
current location: Instructs the
system to show the vehicle’s current
position on the map.
Navigation zoom in, navigation
zoom out: Instructs the system to
zoom in or out on the map.
The following is a list of POI
commands. State the commands
exactly as they are written to receive
information from the system
regarding that specific command.
POIs only displays on the map
screen if the map scale is 1 km
(0.50 mi) or less. If POIs are
displayed on a map with the wrong
scale, the system indicates this.
When you are ready to exit the POI
command mode, state “POI off”.
The available POI commands are:
Navigation [show] map: Instructs
the system to show the current
map screen.
Navigation [command] help,
navigation [command] list:
Instructs the system to state the
navigation command help list.
Navigation repeat [voice]
[guidance]: Instructs the system to
repeat the previous voice guidance
prompt.
Cancel: This command instructs
the system to cancel the most
recently given command.
Navigation [change] map
direction: Instructs the system to
change the direction of the map
to heading up/north up depending
on previous setting.
Navigation store [this point],
navigation mark [this
point]: Instructs the system to store
or mark a point in its memory.
These commands are available
while a map screen is displayed.
Navigation [change to] 3-D
map [mode], navigation [change
to] 2-D map [mode]: Instructs
the system to switch between 2-D
and 3-D map modes. These
commands are available while a
map screen is displayed.
Automobile Commands
•
•
•
•
•
•
Navigation Automobile Club
Navigation Triple A
Navigation Car Wash
Navigation Gas Station
Navigation Gas
Navigation Parking
Infotainment System
•
•
•
•
Navigation Amusement Park
•
•
•
•
•
•
•
•
•
•
Navigation Casino
Financial Locations
Navigation Cinema
• Navigation ATM
• Navigation Bank
• Navigation Other Financial
Navigation Parking Lot
Navigation Parking Garage
Navigation Car Park
Navigation Auto Service and
Maintenance
• Navigation Auto Service
• Navigation Other Automotive
• Navigation GM
Entertainment Locations
•
•
•
•
•
•
•
•
•
Navigation Golf Course
Navigation Historical Monument
Navigation Horse Racing
Navigation Marina
Navigation Museum
Navigation National and State
Parks
Navigation Ski Resort
Navigation Skiing
Navigation Speedway
Navigation Sports Complex
Navigation Stadium
Navigation Performing Arts
Navigation Tourist Attraction
Navigation Tourist Information
Navigation Video Rental
Navigation Winery
Services
Governmental Offices
• Navigation Town Center
• Navigation City Center
• Navigation Convention Center
•
•
•
•
•
•
•
•
•
•
•
•
•
95
Navigation Exhibition Center
Navigation Court House
Navigation Government Offices
Navigation Higher Education
Navigation University
Navigation College
Navigation Hospital
Navigation Library
Navigation Parks and Recreation
Navigation Park and Recreation
Navigation Police Station
Navigation Post Office
Navigation School
Personal Services
• Navigation Beauty and Barber
Shops
• Navigation Dry Cleaning
• Navigation Health and
Fitness Club
• Navigation Business Facility
96
Infotainment System
Restaurant Locations
•
•
•
•
•
•
•
•
•
Navigation Restaurant
•
•
•
•
•
•
•
•
Navigation Continental Food
Navigation I’m Hungry
Navigation Show Restaurant
Navigation American Restaurant
Navigation American Food
Navigation Chinese Restaurant
Navigation Chinese Food
Navigation Coffee House
Navigation Continental
Restaurant
Navigation Fast Food
Navigation Fast Food Restaurant
Navigation French Restaurant
Navigation French Food
Navigation Ice Cream Parlor
Navigation Italian Restaurant
Navigation Italian Food
•
•
•
•
•
•
•
•
•
•
Navigation Japanese Restaurant
Transportation
Navigation Japanese Food
Navigation Other Restaurant
•
•
•
•
•
•
•
•
Navigation Other Food
Destination Commands
Navigation Mexican Restaurant
Navigation Mexican Food
Navigation Seafood Restaurant
Navigation Seafood
Navigation Thai Restaurant
Navigation Thai Food
Shopping Locations
•
•
•
•
•
•
•
•
Navigation Convenience Store
Navigation Department Store
Navigation Grocery Store
Navigation Home and Garden
Navigation Pharmacy
Navigation Shopping Mall
Navigation Specialty Food Store
Navigation Other Retail Stores
Navigation Airport
Navigation Bus Station
Navigation Campground
Navigation Ferry Terminal
Navigation Hotel
Navigation Rental Car Agency
Navigation Rest Area
Navigation Train Station
The following are destination
commands. Confirm your choice of
destination entry by responding
to the system with “Enter
destination” when prompted. You
may also state “Add waypoint”
or “To waypoint” after entering a
destination to add a waypoint along
the route to the final destination.
The command can be cancelled by
stating, “cancel” after the system
talk back.
Infotainment System
Navigation [go] home, navigation
[select] home: Instructs the
system to set the home preset as
the destination.
Navigation [go to] previous
destination: Instructs the system to
set the previous destination as
the new destination.
Navigation [go to] preset
destination [number] (one, two,
three, four, or five): Instructs
the system to set one of the preset
destinations one through five as
the new destination.
Cancel: Instructs the system to
cancel the most recently given
command.
Nametag Commands
There can be up to 10 nametag
entries for phone book entries and
10 nametag entries for destinations.
Navigation store name: Lets
the system know the name is being
stored in memory. The system
requests that the nametag be stated.
After the prompt, state the name
desired for this point. The system
plays back the recorded nametag
and requests confirmation. After the
prompt, state “Yes” to confirm or
“No” to cancel.
Navigation go to [destination]
(nametag), navigation select
[destination] (nametag): Instructs
the system to select a destination
saved under the stored nametag.
The system asks whether the
nametag should be set as a
waypoint or final destination. State
“waypoint” or “destination” after
the prompt.
Cancel: Instructs the system to
cancel the most recent command.
Guidance Commands
Navigation louder, navigation
softer: Instructs the system
to increase and decrease the
volume of the voice guidance and
voice recognition system prompts.
97
Navigation [show] whole route
[map], navigation [show]
entire route [map]: Instructs the
system to show the entire route from
beginning to end on the map.
Navigation show next waypoint
[map]: Instructs the system to show
the next waypoint on the map.
Navigation show destination
[map]: Instructs the system to show
the final destination on the map.
Navigation delete next waypoint,
navigation cancel next
waypoint: Instructs the system to
cancel the next waypoint from
the route. The system requests
confirmation. After the prompt, state
“Yes” to confirm or “No” to cancel.
Navigation delete destination,
navigation cancel destination:
Instructs the system to cancel
the current destination. The system
requests confirmation. After the
prompt, state “Yes” to confirm
or “No” to cancel.
98
Infotainment System
Navigation delete all waypoints
and destination, navigation cancel
all waypoints and destination:
Instructs the system to cancel
the current destination and all
waypoints. The system requests
confirmation. After the prompt, state
“Yes” to confirm or “No” to cancel.
Navigation voice guidance
off, navigation voice guidance:
Instructs the system to turn
route voice guidance off and on.
Navigation detour [entire route]:
Instructs the system to add a
detour to your route. The system
requests confirmation. After
the prompt, state “Yes” to confirm or
“No” to cancel.
Radio Commands
The commands are only available
while in one of the following
audio modes, AM, FM, XM™ (if
equipped), or WX (if equipped).
Radio: Instructs the system to turn
the audio system on.
Radio turn off: Instructs the
system to turn the audio system off.
Radio [set] balance
center: Instructs the system to set
the fade or balance to the center
and middle.
Radio scan up, radio scan
down: Instructs the system to scan
up or down through radio stations.
Radio [band] [select] AM,
radio [band] [select] FM, radio
[band] [select] XM, radio [band]
[select] satellite, radio [band]
[select] WX, radio [band] [select]
weather band: Instructs the
system to go to either the AM, FM,
XM (if equipped), or WX (if
equipped) radio bands.
Radio [select] (frequency) AM,
radio [select] (frequency)
FM, radio [select] (channel)
weather band: Instructs the system
to go to a specific frequency on
either the AM, FM, or weather
bands — examples; Radio select
ninety seven point one FM,
Radio select one weather band,
Radio select ten forty AM.
Radio [select] (channel) XM, radio
[select] (channel) satellite:
Instructs the system to go to a
specific channel on the XM™ band
(if equipped) — example; Radio
select one fifty one XM.
Radio [show] [next] presets:
Instructs the system to change to
the next presets on the active band.
Radio help: Instructs the system
to assist with radio commands. The
radio commands displays on the
screen.
The word “middle” can be
substituted in place of the word
“center”.
The word “fade” can be substituted
in place of the word “balance”.
Infotainment System
CD Commands
The following commands are only
available when a CD, MP3, or DVD
is loaded.
CD: Instructs the system to turn the
audio system CD/DVD changer on.
CD, CD turn off: Instructs the
system to turn the audio system
CD/DVD changer off.
CD [set] balance center: Instructs
the system to set the fade and
balance to the center position.
CD scan up: Instructs the system
to scan upward through tracks.
CD select [disc] (one, two, etc.)
track (one, two, etc.): Instructs the
system to go to a specific disc
and chapter/track.
CD eject [disc] (one, two, three,
four, five, or six): Instructs
the system to eject a specific
numbered disc.
CD help: Instructs the system to
assist with CD changer commands.
Help commands display on the map
screen when the vehicle is stopped.
The word “middle” can be substituted
in place of the word “center”.
The word “fade” can be substituted
in place of the word “balance”.
The word “chapter” can be
substituted in place of the word
“track”.
DVD Changer Commands
The following commands are only
available when a CD, MP3, or DVD
is loaded.
99
DVD scan up: Instructs the system
to scan upward through
chapters/tracks.
DVD [select] disc (one, two, etc.)
track (one, two, etc.): Instructs
the system to go to a specific disc
and chapter/track.
DVD eject [disc] (one, two,
three, four, five, or six): Instructs
the system to eject a specific
numbered disc.
DVD help: Instructs the system to
assist with DVD changer commands.
Help commands display on the map
screen when the vehicle is stopped.
DVD: Instructs the system to turn
the CD/DVD changer on.
The word “middle” can be
substituted in place of the word
“center”.
DVD turn off: Instructs the system
to turn the CD/DVD changer off.
The word “fade” can be substituted
in place of the word “balance”.
DVD [set] balance
center: Instructs the system to set
the fade and balance to the
center and middle.
The word “chapter” can be
substituted in place of the word
“track”.
100
Infotainment System
Climate Control Commands
Heater [set] fan high: Increases
the fan speed by one speed. Repeat
the command until the desired fan
speed is achieved.
Heater [set] fan low: Decreases
the fan speed by one speed. Repeat
the command until the desired fan
speed is achieved.
Heater defrost: Instructs the
system to turn both the front and
rear defrost on.
Heater front defrost: Instructs the
system to turn the front defrost on.
Heater rear defrost: Instructs the
system to turn the rear defrost on.
Heater help: Instructs the system
to assist with climate control
commands. Help commands display
on the map screen when the
vehicle is stopped.
The words “heat”, “A/C”, and “air
conditioning” can be substituted in
place of the word “heater”.
The word “defog” can be substituted
in place of the word “defrost”.
Personalization Commands
These functions are available to
help with setting, storing, and
recalling driver settings.
Set driver one, set driver
two: Instructs the system to change
the driver setting between driver 1
and driver 2. See Configure
Menu on page 80 for more
information.
Select driver one: Selects the
memory settings for driver 1. The
seat, steering wheel, and navigation
system settings change to those
stored by driver 1.
Select driver two: Selects the
memory settings for driver 2. The
seat, steering wheel, and navigation
system settings change to those
stored by driver 2.
Driver help: Instructs the system
to assist with driver commands. Help
commands display on the map
screen when the vehicle is stopped.
Window Commands
Windows up, windows
down: These commands instruct
the system to use the express up or
express down feature on the
windows. The system requests
confirmation. After the prompt, state
“Yes” to confirm or “No” to cancel.
Windows: Instructs the system
to assist with window commands.
Help commands display on the map
screen when the vehicle is
stopped.
Phone Commands
These commands only function if
a Bluetooth® phone has been paired
with the navigation system, is
available in the vehicle, and is on.
Infotainment System
Phone enter: Instructs the system
to dial a phone number after it is
stated. State the number including
the area code (ex. 555 123 4567)
then state “dial.” The phone number
can be stated in partial segments or
the entire phone number can be
stated. If the number is stated in
partial segments the system plays
back each segment.
Correction: Deletes the last
segment of the phone number that
was spoken.
Delete: Deletes the entire phone
number.
Dial: Dials the phone number.
Phone dial name: Instructs
the system to dial the phone number
of a specific previously stored
name. The system responds with
“Name Please”. State the stored
name. The system plays back
the name and requests a
confirmation. Respond with a yes or
no. The system dials the number.
See “Phone Book Screen” under
“Dialing and Making Calls Using
Your Bluetooth® Phone” in the
vehicle’s owner manual for more
information on how to store a
nametag.
Phone redial/recall: Instructs the
system to redial a phone number.
Phone help: Instructs the system to
assist with phone commands.
Help commands display on the map
screen when the vehicle is
stopped.
The word “telephone” can be
substituted in place of the word
“phone”.
OnStar® Command
OnStar: Instructs the system to
connect to OnStar® and the OnStar®
voice recognition system. Refer to
the OnStar® manual for more
information.
101
Personalization
When starting the vehicle, Driver 1
or Driver 2 displays on the
cluster. If personalization is turned
off in feature programming, a
message will not appear on the
cluster. The number on the back of
the transmitter corresponds to
driver 1 or driver 2. The navigation
system can store memory points
for driver 1 and 2 individually. See
Personalization on page 101 for
more information.
102
Infotainment System
Phone
To use the navigation system to
connect or pair to the phone:
Bluetooth
1. Press the CONFIG hard key.
The navigation system has
Bluetooth®. Bluetooth® is a wireless
communication system that allows
you to use a Bluetooth® compatible
phone in a hands-free mode. A
phone directory can be set up for
use in the vehicle. Up to 12 phones
may be registered with your
Bluetooth® system, but only one
phone may be connected at a time.
2. Select the
button.
Setting Up Your Bluetooth®
Phone
In order to use your cellular phone
with this Bluetooth® system,
your phone must be Bluetooth®
compatible. See your phone
information to find out if your phone
supports Bluetooth®. If your
phone does support Bluetooth®,
your phone will need to be paired to
the radio.
E (Bluetooth®) screen
3. Your phone must be in the
discoverable mode and the
Bluetooth® feature powered on,
to be found by the Bluetooth
system in the vehicle. This
is normally in the phone settings
Bluetooth option.
4. Select the Search screen button.
The system searches for the
compatible Bluetooth® devices.
5. Choose your device by touching
the icon next to the device
name. Scroll through the choices
using the arrow buttons.
6. Select the Connect screen
button. Your phone and the
Bluetooth® system will begin a
connecting procedure.
7. Follow the instructions on the
screen of the phone. They will
differ depending on your phone.
Refer to your phone instructions
for further information.
8. Select default so the vehicle will
attempt to automatically connect
to the phone when you enter
the vehicle.
To use the phone to connect or pair
to the navigation system:
1. Press the CONFIG hard key.
2. Select the
button.
E (Bluetooth®) screen
3. Select the Receive screen
button. Use your phone’s search
feature to select the vehicle
from the phone’s list of
Bluetooth® devices found.
4. Follow the instructions on the
screen of the phone to connect
the phone with the vehicle.
They differ depending on your
phone. Refer to your phone
instructions for further
information.
Infotainment System
5. Select default so the vehicle
attempts to automatically
connect to the phone when you
enter the vehicle.
The following options are available
when in the Bluetooth® set up
screen.
Selecting Pass-key allows you to
edit the pairing passkey used
for your vehicle. The system default
device name is “Cadillac STS”
and the pass-key is set to “1234”. It
is recommended that you change
the default pass-key to a number
that you can easily remember.
{ (Page Up): Select to scroll up
the list one page at a time.
z
(Page Down): Select to scroll
down the list one page at a time.
F
(Cancel): Select to return to the
setup screen.
My Info (Information): Select this
screen button to display the
details of your Bluetooth® device
including the name and passkey
information. Selecting Device Name
allows you to edit the name of
the Bluetooth® device name.
Registered Device: Select to
display a list of all Bluetooth®
phones that have been registered
(connected) to the vehicle. From this
list you can set your default
device, change the phones to be
used in the vehicle, search for a new
device, delete a device, and
receive or connect a new device.
103
New Device: Select when you are
in the process of adding a new
phone to be used in the vehicle.
From this menu you can receive a
new device or search for new
devices.
W (Back): Select to return the
previous screen.
Connect: Select to connect your
phone to the Bluetooth® system.
Receive: Select this screen button
to have your Bluetooth® system
connect to your phone when you are
using your phone as the device to
initiate pairing. This allows your
phone to search for other devices
and to find and connect to your
vehicle. When this button is pressed,
the navigation system is waiting
to be connected to a device.
104
Infotainment System
Y
(Delete): Select to delete paired
items one at a time.
To delete an item:
1. Select the item from the
device list.
2. Select the delete screen button.
Default: Select to set a device
as the default.
To set a device as a default:
1. Select the device name from the
device list.
2. Select the Default screen button.
The device is underlined. The
system automatically connects to
the defaulted device when
entering your vehicle.
Search: This screen button begins
the system’s search for all
available Bluetooth® phones in a
designated area.
Bluetooth® Phone Screen
This information on this screen
depends on the information received
from the phone. Some phones
may not support this feature. While
in this screen, use the different
features to dial or to make a call.
Press the AUX hard key to get to the
BLUETOOTH PHONE screen.
The screen displays even if
the phone is not connected. If the
phone is not connected, the system
displays “Bluetooth phone not
available, please check phone.”
E
(Bluetooth): Select to get to the
Bluetooth® screen.
^ (Call Status): This area indicates
the call status. It indicates whether
or not there is good signal strength
and whether or not the phone is
in service range.
Infotainment System
q
(Backspace): Select to delete
numbers after they have been
entered. Select and release
to delete numbers one-by-one or
hold it down to delete all numbers at
the same time.
Switch Call: Use this screen button
to switch calls during a call-waiting
situation.
Hands Free: Select to put the
phone in hands-free mode and to
hear it through the vehicle’s
speakers.
Private: Select to put the phone in
handset mode.
Last 10: This screen button goes to
a screen showing the last 10 calls
either sent or received using
Bluetooth®. Phone calls can be
placed from this screen. See
the “Last 10 Calls Screen” later in
this section for more information.
105
g (Phone Book): This screen
button goes to the phone book
screen. From this screen names can
be stored in the Bluetooth® system
to be used to dial calls from.
This address book is independent of
the phone’s address book and
data cannot be transferred from the
Bluetooth® phone book to the
phone’s address book or vise versa.
Dialing and Making Calls
Using Your Bluetooth® Phone
V
3. Use the keypad to input the
number to be called. The number
can also be selected from the
phone book or from the last
10 calls.
(Send/End Call): This screen
button lets you place a call after
using the alpha keypad or to end a
call at the end of the conversation.
When you send a call, the button is
green. When you are in a call
the button is red to indicate that
touching the button ends the call.
Once your phone has been set
up, you are ready to begin using it.
1. Press the AUX hard key to
enter the BLUETOOTH PHONE
screen.
2. Select the Bluetooth® screen
button ( E ).
4. Select the phone icon screen
button to place the call.
5. When ready to hang up, press
the phone icon screen button
again to disconnect the call.
To reduce driver distraction, the
phone screen buttons are not
available while driving. See
“Defensive Driving” in the Index of
the vehicle’s owner manual for more
information.
106
Infotainment System
Phone Book Screen
This screen allows access to your
Bluetooth® Phone Book where
names and phone numbers
are stored. Information in this screen
must be entered using the New
screen button or by copying
and adding the number from the last
10 dialed or received options.
This phone book is stored on the
Bluetooth® system. Phone book
entries can not be transferred to the
phone address book.
{ (Page Up): Scrolls up the list
one page at a time.
y (Scroll Up): Scrolls up the list
one entry at a time.
q r (Scroll to End/Beginning):
These screen buttons allow you
to scroll through the entry as
necessary.
z
(Scroll Down): Scrolls down
the list one entry at a time.
New: This screen button begins the
creation of a new phone book
entry.
z
To add a new phone book entry:
(Page Down): Scrolls down the
list one page at a time.
Q
(OnStar): Select to use the
OnStar system to place a phone
call. See OnStar® System on
page 79 for more information.
Video: Select when using an
auxiliary device. See Auxiliary
Devices on page 33 for more
information.
1. Select the New screen button.
2. Select a name or phone
screen button entry.
3. Use the keypads to enter the
name and telephone number.
There can be a maximum
of 24 characters.
(Cancel): Select to return to the
BLUETOOTH PHONE screen.
4. A nametag to the entry to work
with the voice recognition. Up
to 20 nametags can be used for
phone book entries in use at
a time.
W
5. After entering the information,
touch the OK screen button.
F
(Back): This screen button
returns the screen to the previous
page.
Infotainment System
107
1. Select the g (phone book)
screen button.
6. The system plays back the name
and request confirmation. Say
“Yes” to confirm or “No” to
cancel.
Phone calls can be placed from this
screen. See the “Last 10 Calls
Screen” later in this section for more
information.
2. Select the name to be deleted.
To delete a nametag:
3. Select the Edit screen button.
1. Select the g (phone book)
screen button.
g (Phone Book): This screen
button goes to the phone book
screen.
2. Select the name to delete.
V
To delete a phone book entry:
4. Select the Y (delete) screen
button.
5. The system will request
confirmation. Press Yes to
confirm or No to cancel.
To add a nametag to a specific
name:
1. Select the g (phone book)
screen button.
2. Select the name that will have a
nametag added.
3. Select the Edit screen button.
4. Select the Add Nametag screen
button.
5. The system requests to state the
name associated with this entry.
3. Select the Edit screen button.
4. Select the Del Nametag screen
button.
5. The system requests
confirmation. Press Yes to
confirm or No to cancel.
Edit: This screen button edits an
existing phone book entry.
Y All (Delete All): This screen
button deletes all phone book
entries.
Last 10: This screen button goes to
a screen showing the last 10 calls
either sent or received using
the Bluetooth system.
(Send/End Call): This screen
button lets a call be placed after
touching the appropriate phone book
entry or to cancel a call at the
end of the conversation.
Last 10 Calls Screen
This screen shows either the last
10 calls that have been placed
or the last 10 calls received by the
Bluetooth® system. The newest
calls are at the top of the list.
{ (Page Up): Scrolls up the list
one page at a time.
y (Scroll Up): Scrolls up the list
one entry at a time.
108
Infotainment System
z
(Scroll Down): Scrolls down
the list one entry at a time.
z
(Page Down): Scrolls down the
list one page at a time.
F
(Cancel): Returns to the
BLUETOOTH PHONE screen.
W (Back): Returns the screen to
the previous page.
q r (Scroll to
End/Beginning): Scrolls through
the entry as necessary.
Save: Saves the entry in your
phone book.
Y
All (Delete All): Deletes all
phone book entries in the current
screen, either received or sent.
g (Phone Book): Goes to
the phone book screen.
V (Send/End Call):
Lets a call be
placed after touching the
appropriate phone book entry or to
cancel a call at the end of the
conversation.
Sent: Gives the list of the last
10 calls sent from the system.
Received: Gives the list of the last
10 calls received on the system.
Dialing from Navigation
Screens
When a Bluetooth® phone is
connected the V (Send/End Call)
screen button can be used to
dial the associated number. Press
the Info screen button when it
appears on the display. The
V (Send/End Call) screen button
appears next to the telephone
number. Press the screen button
and the number dials. For
example, dial a POI number
(restaurant, bank, etc.), dial a
number associated with a preset
destination.
INDEX
A
Active Steering and Magnetic
Ride Control (Vehicles with
Enhanced StabiliTrak®) .........
Address ................................
Alpha-Numeric Keypad ............
AM-FM Radio .........................
Audio ....................................
Audio Adjust ..........................
Audio Players
MP3 ..................................
Auto Reroute .........................
Auxiliary Devices ....................
87
64
36
14
19
17
30
47
33
i-1
B
D
Bluetooth ............................. 102
Bluetooth® ............................. 80
Bluetooth® Phone Screen ....... 104
Database Coverage
Explanations ....................... 90
Deleting Personal Information ..... 9
Destination, Navigation ............ 63
Devices, Auxiliary .................... 33
Dialing and Making Calls
Using Your Bluetooth®
Phone .............................. 105
Dialing from Navigation
Screens ........................... 108
Disc Errors ............................ 30
DVD Map Disc Messages ........ 37
DVD/CD Player ...................... 23
C
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens) .......................... 4
Canceling Guidance ................ 13
CD
DVD Player ........................ 23
Change Route ........................ 48
Cleaning the Display ............... 14
Clock .................................... 84
Configure Menu ...................... 80
Coordinates ........................... 74
i-2
INDEX
E
H
Ejecting the DVD Map Disc ...... 38
Emergency ............................ 72
F
Handling the DVD Map Disc .....
Hard Keys .............................
Head-Up Display ....................
Home ...................................
M
38
34
78
75
Finding a Station .................... 15
Freeway Entrance/Exit ............. 71
I
G
Installing the DVD Map Disc ..... 37
Intersection ............................ 69
Introduction ............................. 3
Getting Started on Your
Route ................................
Global Positioning
System (GPS) .....................
Guidance Volume ...................
Guidance Windows .................
76
88
13
44
Magnetic Ride Control
(Vehicles without Enhanced
StabiliTrak®) .......................
Map ......................................
Map Adjustments ....................
Map Scales ...........................
Maps ....................................
Memory Infotainment Settings
and Presets ........................
Memory Points .................. 52,
Memory Settings .....................
Menu
Configure ...........................
MP3 .....................................
87
68
38
38
36
86
73
85
80
30
INDEX
N
Navigation
Destination .........................
Menu .................................
Symbols .............................
Using the System ................
Navigation Set Up ..................
63
47
39
34
81
O
OnStar® System ..................... 79
Ordering
Map DVDs ......................... 90
Overview, Infotainment
System ................................ 4
i-3
P
R
Phone
Bluetooth .......................... 102
Phone Number ....................... 70
Playing an Audio CD ............... 24
Playing an Audio or Video
DVD .................................. 26
Playing the Radio ................... 15
Point of Interest (POI) ............. 67
Preset Destination ................... 75
Preset Stations ....................... 16
Previous Destination ................ 73
Problems with Route
Guidance ........................... 89
Radio
Personalization .................. 101
Radio Data System (RDS) ....... 20
Radio Personalization .............. 14
Radios
AM-FM Radio ..................... 14
CD/DVD Player ................... 23
Satellite ............................. 21
Recall Memory Settings ........... 87
Region .................................. 64
i-4
INDEX
S
T
Satellite Radio ........................ 21
Screen Appearance ................. 80
Scrolling the Map ................... 39
Setting the Clock ...................... 9
Setting the Region, Entering
an Address and Point of
Interest, and Storing a
Home Destination and
Preset Destinations .............. 10
Setting the Search Area ........... 38
Setting Up Your Bluetooth®
Phone .............................. 102
Speed Advisory ...................... 88
Store Memory Settings ............ 86
Storing Radio Station Presets ..... 9
Symbols, Navigation ................ 39
System Needs Service, If ......... 90
Three Routes ......................... 77
Touch-Sensitive Screen
Buttons .............................. 36
Traveling Across Regions ......... 47
U
Using an MP3 ........................ 30
Using Your Home or Preset
Destinations ........................ 13
V
Vehicle ..................................
Vehicle Positioning ..................
Voice Recognition ...................
Voice Recognition Commands ..
Voice Recognition Help ............
84
89
91
93
92
X
XM™ Satellite Radio Service .... 21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising