HDMV-KM Quick Start Guide.pub
TECHNICAL SPECIFICATIONS
VIDEO
Video Bandwidth
Single-link 340MHz
[10.2Gbps]
WHAT'S IN THE BOX?
Resolution HDTV
Up to 1080p
PART NO.
PC Resolution
up to 1920 x 1200
HDMV-KM
1
4-Port Multiviewer with
Input Video Signal
1.2 volts
CCPWR06
Input DDC Signal
5 volts
1
1
6' Power Plug Cable
Quick Start Guide
Single Link Range
1080p
Format
HDMI 1.4
DVI Compliance
Single-link DVI-D 2.0
Output Cable Length Up to 20 ft.
HDCP Compliance
1.0/2.0
Input Interface
(4) HDMI
Output Interface
HDMI
Connector
Type A [19-pin female]
USB
(2) USB Type A
For Keyboard Mouse
(4) USB Type B
For Connecting Computers
(2) USB Type A
For optional USB devices
Input
USB 2.0, 1.1, and 1.0
HDMV-KM
QTY DESCRIPTION
Quick Start Guide
4-Port Full HD Multiviewer
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI
makes no warranty of any kind with regard to this
material, including but not limited to, implied
warranties of merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
CONTROL
Front Panel
Tact Switches
RS-232
DB9 (female)
Designed and Manufactured in the USA
800.AVI.2131
OTHER
Dimensions
17” W x 1.7” H x 10.2” D
Weight
4 lbs.
Power
100-240 VAC
Tel: (818) 503-6200 Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
View four different HDMI video
sources simultaneously on one
screen with USB keyboard and
mouse support plus 2 USB ports
for peripheral USB devices
APPLICATION DIAGRAM
The HDMV-KM Multiviewer Switch allows you
to view up to four different high definition video
sources simultaneously on one display device. It
also supports keyboard and mouse functionality, allowing you to access all four displays with
one set of interface controls.
FEATURES
·
·
·
·
·
·
·
·
·
·
View up to four computers on a single monitor at the press of a button.
Supports USB keyboard and mouse.
On-screen display (OSD) makes setup and
switching easy.
Change views by pressing the tact switches
and RS-232.
Display each computer with clean, crisp HD
resolutions up to 1920x1080p.
Quad-mode splits the screen to show four
computers on one screen.
PiP-mode displays one computer in full
screen with three thumbnail views.
Control any one computer while monitoring
three others.
Connect up to two USB 2.0 devices. (flash
drive, printer, etc.) These devices are available to all connected computers.
With your cursor in any computer’s screen,
double click the roller on your mouse to
make that image full screen. Double click
the roller again to return to the prior screen
configuration.
CONTROLS
CONNECTING THE HDMV-KM
1.
2.
3.
4.
5.
6.
7.
8.
Connect up to 4 computer’s USB port to the HDMV-KM Type B USB ports.
Connect up to 4 computer’s video output to the HDMI video input ports on the HDMV-KM.
Connect any remaining video sources to the HDMV-KM.
Optionally connect up to two USB 2.0 devices. (flash drive, printer, etc.)
Connect a video display to the HDMI output port on the HDMV-KM and turn it on.
Optionally connect a computers RS-232 port to the RS-232 connector on the HDMV-KM for RS-232 control.
Connect a USB keyboard and mouse to the two USB ports identified for keyboard and mouse on the HDMV-KM and
turn it on.
Turn on all the equipment connected to the HDMV-KM.
1. Front Panel Buttons
2. On Screen Display
3. Hot Key Commands
4. RS-232
FRONT
BACK
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement