Samsung | MAX-C670 | User manual | Samsung MAX-C670 User Manual

THREE-CD CHANGER
MINI-COMPACT SYSTEM
MP3-CD/CD-R/RW PLAYBACK
MAX-C670
Instruction Manual
Safety Warnings
Thank you for buying this
SAMSUNG mini-compact system.
Contents
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
SAFETY WARNINGS .................................................................................................................................................................................. 2
INSTALLING YOUR MINI-COMPACT SYSTEM
Front Panel View ...................................................................................................................................................................................... 4
Window Display........................................................................................................................................................................................ 5
Remote Control ........................................................................................................................................................................................ 5
Where to Install Your Mini-Compact System............................................................................................................................................ 6
Connecting your System to the Power Supply ........................................................................................................................................ 6
Rear Panel View ...................................................................................................................................................................................... 6
Inserting Remote Control Batteries .......................................................................................................................................................... 7
Connecting to an External Source .......................................................................................................................................................... 7
Connecting the Loudspeakers ................................................................................................................................................................ 8
Connecting the AM (MW) Aerial .............................................................................................................................................................. 9
Connecting the FM Aerial ........................................................................................................................................................................ 9
Demo/Dimmer function ............................................................................................................................................................................ 10
Setting the Clock ...................................................................................................................................................................................... 10
CD/MP3-CD-PLAYER
Loading and Changing Compact Discs.................................................................................................................................................... 11
To replay the CD/MP3-CD ...................................................................................................................................................................... 11
Selecting a CD in the Disc changer ........................................................................................................................................................ 12
Selecting a Track...................................................................................................................................................................................... 12
To select the MP3-CD title and track ...................................................................................................................................................... 12
Searching for a Specific Music Passage on a CD .................................................................................................................................. 13
Shuffle Play Function .............................................................................................................................................................................. 13
Repeating One or All Tracks on the Compact Discs................................................................................................................................ 14
Medley Play.............................................................................................................................................................................................. 14
Function to skip through 10 track at a time ............................................................................................................................................ 14
Last Memory Function ............................................................................................................................................................................ 14
Programming the Order of CD Playback ................................................................................................................................................ 15
Checking or Changing Programmed CD Tracks...................................................................................................................................... 16
TUNER
Searching for and Storing the Radio Stations ........................................................................................................................................ 16
Selecting a Stored Station........................................................................................................................................................................ 17
Improving Radio Reception...................................................................................................................................................................... 17
TAPE DECK
Listening to a Cassette ............................................................................................................................................................................ 18
CD Synchro Record Feature.................................................................................................................................................................... 18
Recording a Compact Disc ...................................................................................................................................................................... 18
Recording a Radio Program .................................................................................................................................................................... 19
Copying a Cassette (Dubbing) ................................................................................................................................................................ 19
Selecting the Cassette Playback Mode(Deck 2 only) ............................................................................................................................ 19
Tape Counter............................................................................................................................................................................................ 19
OTHER FUNCTIONS
Timer Function ........................................................................................................................................................................................ 20
Cancelling the Timer ................................................................................................................................................................................ 20
Mute Function .......................................................................................................................................................................................... 21
Selecting Sound Mode ............................................................................................................................................................................ 21
Power SurroundPower Surround XT/Power Sound Function .................................................................................................................. 21
Setting the System to Switch off Automatically ........................................................................................................................................ 22
Connecting Headphones.......................................................................................................................................................................... 22
Microphone Function(option).................................................................................................................................................................... 22
RECOMMENDATIONS FOR USE
Safety Precautions .................................................................................................................................................................................. 23
Cleaning Your Mini-Compact System ...................................................................................................................................................... 23
Precautions When Using Compact Discs ................................................................................................................................................ 24
Precautions When Using Audio Cassettes .............................................................................................................................................. 24
Before Contacting the After-Sales Service .............................................................................................................................................. 24
Technical Specifications .......................................................................................................................................................................... 25
Symbols
2
Press
Push
Important
Note
3
GB
Front Panel View
Window Display
GB
30
29
28
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
27
19 18 17
16
15 14 13
12
11
1
1
2
26
2
3
17.
25
3
4
5
4
5
6
22
1
MUTE
2
3
4
9 10 11
4
10
3
18.
19.
Remote Control
8
10.
11.
12.
13.
14.
15.
16.
17.
9
23
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
7 8
MAX-ZJ650-RDS
24
6
11.
12.
13.
14.
15.
16.
FM MODE (STEREO)
POWER SURROUND
VOLUME
TITLE
POWER SOUND
TAPE 1/2
TAPE RUNNING DIRECTOR
TAPE REVERSE MODE
PLAYING DISC NUMBER
MAIN DISPLAY
(FUNCTION,FREQUENCY,TIME,ETC.)
CD SYNCHRO RECORDING
RECORDING
TUNER FREQUENCY UNIT
CLOCK
AI SLEEP
CD PLAYING DISC MODE OR CD
REPEAT MODE
CD PROGRAM OR TUNER MEMORY
TO PROGRAM
TUNER PRESET
CD PROGRAM AND TUNER PRESET
NUMBER
Standby/On
Function Selection buttons
Demo/Dimmer
Echo (option)
MIC Level(option)
MIC(option)
Headphone Jack Connector
Cassette Deck 1
Search Function buttons
Tuning Mode or Stop button
Rec/Pause
Bubbing
CD Synchro Recording
Tape 1/2
Timer/Clock
Tape Reverse Mode
Timer On/Off
Tape Counter Reset
12
13 14 15 16 17 18 19 20
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
21
Tuner Memory
FM Mono/Stereo
LATIN SOUND
Enter
Cassette Deck 2
AI Sleep
Multi Jog
Power Surround/Power Surround XT/PowerSound
Volume
CD Open/Close
CD Disc Change
CD Disc Selection buttons
Window Display
5
6
7
25
24
23
AUX
P.SURROUND
TIMER ON/OFF
DEMO/DIMMER
LATIN SOUND
AI SLEEP
PROGRAM/SET
MEDLEY
TUNER
BAND
DISC SKIP
SHUFFLE
CD REPEAT
CD/MP3-CD
8
VOLUME
TUNING/
ALBUM
22
21
20
19
18
17
TUNING
MODE
DECK
1/2
9
10
+10
16
15
TA P E
11
12
14
13
1.
DEMO/DIMMER
2.
POWER(STANDBY/ON)
3.
TUNER/BAND
4.
TIMER ON/OFF
5.
AI SLEEP
6.
DISC SKIP
7.
CD TRACK SKIP OR SEARCH
8.
CD STOP
9.
DECK 1/2
10.
VOLUME CONTROL
11.
TAPE REWIND
12.
TAPE STOP
13.
TAPE PLAY
14.
TAPE FAST-FORWARD
15.
TUNING UP OR DOWN/MP3-CD ALBUM SELECT
16.
TUNING MODE/CD +10
17.
CD PLAY/PAUSE
18.
CD SHUFFLE PLAY
19.
CD REPEAT
20.
CD MEDLEY PLAY
21.
LATIN SOUND
22.
POWER SURROUND/POWER SURROUND
XT/POWER SOUND
23.
MUTE
24.
PROGRAM/SET/MP3-CD LAST MEMORY PLAY
25.
AUX
5
Where to Install Your Mini-Compact System
Rear Panel View
Inserting Remote Control Batteries
Connecting to an External Source
GB
To take full advantage of your new mini-compact system, follow
these installation instructions before connecting the unit.
1
2
3
4
5
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
Insert or replace remote control batteries when you:
Purchase the mini-compact system
Find that the remote control is no longer operating correctly
When replacing the batteries, use a new set of batteries and
never mix alkaline and manganese batteries.
1
Place your thumb on the position marked
on the battery
compartment cover (rear of the remote control) and push the cover in
the direction of the arrow.
2
Insert two AAA, LR03 or equivalent batteries, taking care to respect
the polarities:
+ on the battery against + in the battery compartment
– on the battery against – in the battery compartment
3
The auxiliary input can be used to take advantage of the
sound quality of your mini-compact system when listening to
other sources.
Examples: A television
A video disc player
A Hi-Fi stereo video cassette recorder
To connect to the external source, the source must have an
audio output. In addition, you need an RCA connection cable.
1
2
Replace the cover by sliding it back until it clicks into position.
Set the system to standby mode and disconnect it and the external
source from the main socket.
Connect the audio cable to the rear of the mini-compact system.
Connect the...
To the connector marked...
Red jack
White jack
R (right)
L (left)
For optimum sound quality, do not invert the right and left
channels.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
1. FM Aerial Connector Terminal
3
Plug the system back into the main socket and press
STANDBY/ON to switch it on.
2. AM Aerial Connector Terminals
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
3. AUX-Input
5
6
Switch the external source on.
4. Speaker Connector Terminals
5. Voltage Selector(option)
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the
voltage.
1
Check the position of the voltage selector on the rear of the system
(OPTIONAL).
2
3
Plug the main lead into an appropriate socket.
Press the STANDBY/ON button to switch your mini-compact system
on.
3
4
6
7
Connecting the AM (MW) Aerial
Connecting the Loudspeakers
GB
Connect the connecting jacks (2) to the back of mini-compact system.
Make sure the polarities (+and -) are correct.
Left speaker wire should be connected to mark “L” of the unit back.
Right speaker wire should be connected to mark “R” of the unit back.
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The AM aerial connector terminals are located on the rear of the system and are
marked AM .
To avoid noise interference, check that the loudspeaker wires do not run
close to the aerial wires.
Always keep them at least 2 inches (5 cm) away.
RADIO ANTENNA
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
SPEAKERS OUT (6
)
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 16 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.
Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.
Do not take the speaker apart from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9
8
DEMO/DIMMER function
Loading and Changing Compact
Discs
Setting the Clock
To replay the CD/MP3-CD
GB
All functions available on the system can be viewed on the
display and the display's brightness can be switched between
"on" and "off".
1
Press the DEMO/DIMMER button.
Result: All functions available on the system appear on the front
panel display.
Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the mini-compact system
After a power failure
After unplugging the unit
3
Press the DEMO/DIMMER button again.
Result: The Dimmer function is selected and the display darkens.
Press the DEMO/DIMMER button once again to brighten the front
panel display.
A display brightness control can only be performed while the
system power is on.
1
2
Switch the system on by pressing STANDBY/ON.
Press TIMER/CLOCK twice.
Result: CLOCK is displayed.
3
Press ENTER.
Result: The hour flashes.
4
To...
Turn the MULTI JOG knob to the...
Increase the hours
Decrease the hours
Right
Left
5
When the correct hour is displayed, press ENTER.
Result: The minutes flash.
6
To...
Turn the MULTI JOG knob to the...
Increase the minutes
Decrease the minutes
Right
Left
7
Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
Never press down or place objects on the carrousel.
Always treat your compact discs with care; refer, if necessary, to
the section entitled “Precautions When Using Compact Discs” on
page 24 .
1
Switch the system on by pressing STANDBY/ON.
2
Press the OPEN/CLOSE( ) button on the front panel.
Result: The compartment opens.
3
Place one in the front slots of the carrousel, with the label on the
discs facing upwards.
Check that the compact disc has been correctly inserted in
the holder before closing the compartment.
4
If you wish to load a another compact disc, press the DISC CHANGE
button on the front panel (or DISC SKIP on the remote control).
Result: The carrousel rotates by 120°.
5
Close the compartment by pressing the OPEN/CLOSE( ) button
again.
If you wish to start playing a disc directly, you can also
proceed as follows.
When the correct time is displayed, press ENTER.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing TIMER/CLOCK once.
You can also use
/
buttons on the panel front or
TUNING/ALBUM
/
on the remote control to instead of
MULTI JOG knob in step 4, 6.
You can also use PROGRAM/SET button on the remote control instead of ENTER button in step 3,5,7.
This is a player that enables the playback of audio CD, CD-R,
CD-RW and MP3-CD and does not possess the function that
saves MP3 files.
Never force the compact disc carrousel when opening and
closing the compartment.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Each of these are explained in detail in this guide. Please refer to
the relevant section.
2
The CD disc changer can contain up to three 12 cm or 8 cm
compact discs without using an adapter.
To play...
1
2
3
4
) of the main unit to select the CD function.
Insert more than one CD or a MP3-CD.
Press the CD/MP3-CD(
) button of the main unit or the
button
of the remote control.
If there are more than one CD or an MP3-CD inserted,
replays are then processed in order.
Your CD Player will take a few moments to scan through
all the tracks recorded on a particular MP3-CD.
The English name of the song may be indicated on the display
only if directly downloaded from the PC or if the purchased MP3CD is sorted according to titles(directory). (Other
languages besides English may not be indicated.)
The English name of the track may not be indicated
depending on the characteristics of the MP3-CD.
<During the MP3-CD playback>
Track Indicator
Playtime Indicator
Adjust the volume according to needs with the following procedures.
Turn the VOLUME control of the main unit.
or
Press the VOLUME + or – button of the remote control.
The volume level can be adjust in 31 steps(VOL MIN,VOL 1VOL 29,and VOL MAX).
6
If it is desired to pause while the playback is processing, press the
CD/MP3-CD(
) button.
To change or unload the compact disc changer, repeat Steps 2 to 5.
Keep the compartment closed whenever you are not using
it, to prevent dust from entering.
4
1
2,5
Title(Directory) Indicator Playtime Indicator
5
Press the CD/MP3-CD(
7
4,6
Press the CD/MP3-CD(
Track Indicator
You can load or unload compact discs when the radio,
tape or auxiliary source function is selected.
3,5,7
Press the STANDBY/ON button to switch on the power.
<CD Playback>
Press...
CD/MP-CD (
) or Disc 1
Disc 1
Disc 2
Disc 2
Disc 3
Disc 3
Result: The compartment closes automatically and the disc selected
starts playing.
6
At least more than one CD should be inserted for playbacks.
To stop playback, press the
) button once again to playback again.
button.
A new disc may be inserted in the remaining two compartments
excluding the CD which is being played back. Press the Disc
Changer button to open the CD tray. The revolving part does
not turn during playbacks.
If there is not even one CD inserted in the CD tray, it is
indicated as “NO DISC”.
If the CD Repeat function is not selected, 3 CDs are played back
which automatically stops.
5
1
2
2,4,6
1
5
7
10
11
CD SYNCHRO
Selecting a CD in the Disc changer
To select the MP3-CD title and
track
Searching for a Specific Music
Passage on a CD
GB
The CD function is automatically selected when Disc Skip is
pushed.
To select a specific disc, press the corresponding DISC (1, 2, 3) button on the front panel or DISC SKIP on the remote control, until the
required disc indicator flashes.
Result: All the discs will be played in turn, starting with the one selected.
If you wish to play the current disc only, press CD REPEAT on
the remote one or more times, until 1 CD is displayed.
If you use the DISC (1, 2, 3) function when listening to the radio
or to a tape, the system switches automatically to the CD mode.
If the disc selected is not loaded, the next disc is played
automatically.
When the CD door is opened,if you press and hold the
OPEN/CLOSE button over 5 seconds until “LOCK”is on the
display,the CD door will be locked.In the case, you should
press and hold the OPEN/COLSE button once again until
“UNLOCK”is on the display,the CD door will be unlocked.
The title and track of the MP3-CD desired to listen may be
selected on stopping or during playbacks.
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
What is MP3?
MP3 means MPEG1 Layer 3, the global standard for audio
signal compression technology. It uses digital compression
technology to compress original sound data by up to 12 times
without sound quality degradation.
Main Unit
To move the title(Album),
Turn the Multi Jog Knob.
File Compatibility
To move the track,
press the
button.
,
Moves the track within the title.
If the
button is pressed
,
more than the number of tracks
within the title, it moves to the next title.
Title Movement
Track Movement
The unit will playback files created in MP3 format
(Mpeg1.Layer3) with *.mp3 as their extension.
Playback will be impossible for the file of MP2 or
22KHz.
ID3*tags can be shown on the display in English.
*An MP3 file can contain file information called “ID3 Tag ”
where its album name, performer, rack title, etc. are recorded.
It is recommended that you turn the volume down before using
this function.
To search through the tracks...
Press and hold down...
Forwards
for at least one second
Backwards
for at least one second
You can also press and hold down
search through the tracks.
How many MP3 files can a CD-R or CD-RW disc record?
/
on the front panel to auto
AI SLEEP
PROGRAM/SET
MEDLEY
DISC SKIP
SHUFFLE
CD REPEAT
The maximum capacity of one CD-R or CD-RW disc is
680MB.
Normally, one MP3 file has a capacity of 4MB, therefore
approximately 170 files can be recorded on a single disc.
CD/MP3-CD
TUNING/
ALBUM
VOLUME
S
Regarding the playback of CD-R/RW
DISC SKIP
SHUFFLE
CD REPEAT
CD/MP3-CD
Remote Control
Press the TUNING ALBUM
or
button, the title moves.
Press the
or
buttons,the track moves.
Selecting a Track
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewritable) and editing by
the user, playback is processed on the respective
completed status. (The player may not be played back
according to the characteristics of the CD or recorded
status.)
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
Shuffle Play Function
You can listen to the tracks on a compact disc in a different
order each time, as the various tracks will be selected
automatically in a random sequence.
1
Press the SHUFFLE button.
Result: The SHUFFLE (CD)or RANDOM(MP3-CD) indication appears
and all the tracks are played in a random order. Both the track
number and the playing time are displayed.
2
When playing tracks in a random order, you can:
Move on to the next track (selected at random) by pressing
/
or turning MULTI JOG one notch to the left or right.
Search quickly for a specific point in the current track by holding
/
more than one second .
3
When you have finished the random playback, press
SHUFFLE button again.
CD/MP3-CD
To start playback at the beginning of the...
Turn the MULTI JOG knob...
Next track
Current track
Previous track
Track of your choice
One notch to the right
One notch to the left
Two notches to the left
The appropriate number of
notches to the right or to the left
CD
SYNCHRO
CDSYNCHRO
SYNCHRO
CD
CD SYNCHRO
Playback sequence of titles and tracks
VOLUME
TUNING/
ALBUM
TUNING
MODE
DECK
1/2
+10
You can also use the
and
buttons on the front panel, or
the
and
buttons on the remote control to select a track.
In case of Window Explorer display.
The arrows indicate playback sequence of titles and
tracks.
Tracks with jpg, wav or doc only are not audio files and
therefore will be skipped.
TA P E
(E) CD-ROM drive
TITLE 01
or press the
Skipped
Kevin01.mp3
Kevin02.mp3
Kevin03.mp3
Kevin04.mp3
Kevin.jpg
Life.doc
Repeat and CD Synchro function are not available in Shuffle playing
mode.
TITLE 02
TITLE 04
Summer05.mp3
Summer06.mp3
Garden.mp3
Garden.mp3
AI SLEEP
PROGRAM/SET
MEDLEY
SHUFFLE
CD REPEAT
TITLE 03
TITLE 05
Michael07.mp3
Michael08.mp3
DISC SKIP
Water.mp3
Water.mp3
Skipped
2
TITLE 06
Kenny01.wav
Kenny02.wav
CD/MP3-CD
1,3
2
TITLE 07
Butterfly.mp3
Piano14.mp3
John15.mp3
VOLUME
DECK
1/2
3
TUNING/
ALBUM
TUNING
MODE
+10
12
13
Repeating One or All Tracks
on the Compact Discs
GB
You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
2
Press the +10 button briefly while playing back a
CD and MP3-CD. The track 10 tracks after the current
one will then be played back.
To repeat...
Press CD REPEAT on the Remote
Control or more times until...
The current track indefinitely
The selected disc
All discs loaded
REPEAT 1 is displayed
REPEAT 1 CD is displayed
REPEAT ALL CD is displayed
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the
button three times .
SHUFFLE
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
5 ➝10➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
4
8
1
2
3
When you wish to stop the Repeat function, press CD REPEAT until
ALL CD or 1 CD is displayed, or press
.
DISC SKIP
Programming the Order of CD Playback(This function is not available during playback of an MP3-CD.)
Function to skip through 10
tracks at a time
If the CD function is selected, stop the player by pressing
.
Load the selected CDs.
Press PROGRAM.
Result: The following indications are displayed:
5,9
CD/MP3-CD
CD REPEAT
(01 = Program no., PR 1 = Disc no., – – = Track no. on the disc)
CD/MP3-CD
2
VOLUME
1,2
VOLUME
TUNING
MODE
DECK
1/2
TUNING/
ALBUM
TUNING
MODE
TUNING/
ALBUM
+10
4
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
5
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
DECK
1/2
+10
6
TA P E
Press PROGRAM to confirm your selection.
Result: The selection is stored and
Medley Play
(This function is only available during playback of a CD.)
Last Memory Function
(This function is only available during playback of MP3-CD.)
You can select “MEDLEY ON”and “MEDLEY OFF”during playback of a CD.
1
Press the MEDLEY PLAY button once.
Result: “MEDLEY ” is displayed.
The interval time between the tracks can be shorten.
2
Press the MEDLEY PLAY button again.
Cancel this function,return to normal playback.
When MP3-CD playback is selected again after your CD
player has been stopped or turned off, this function allows
playback from the start of the track that you last listened
to.
Press the PROGRAM button while your MP3-CD is being played
. The LAST ON and LAST OFF may be repeatedly selected.
1,10
is displayed.
7
8
To select other tracks, repeat Steps 4 to 6.
9
To...
Press CD/MP3-CD (
programmed.
) to listen to the track selection in the order
Turn the MULTI JOG knob...
AI SLEEP
PROGRAM/SET
MEDLEY
DISC SKIP
SHUFFLE
CD REPEAT
3,6
CDSYNCHRO
SYNCHRO CD SYNCHRO
CD
SYNCHRO
CD
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the
left
CD/MP3-CD
10 To cancel the selection, press
TIMER ON/OFF
DEMO/DIMMER
SOUND MODE
AI SLEEP
PROGRAM/SET
MEDLEY
AI SLEEP
PROGRAM/SET
MEDLEY
DISC SKIP
SHUFFLE
CD REPEAT
DISC SKIP
SHUFFLE
CD REPEAT
CD/MP3-CD
14
CD/MP3-CD
.
Once if the compact disc player is stopped
Result: PRGM is no longer displayed.
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the
tracks in step 5, 9.
/
buttons to select the required
15
Searching for and Storing the Radio
Stations
Checking or Changing Programmed
CD Tracks
Selecting a Stored Station
B
GB
You can check or change your selection of tracks at any time.
1
2
Press
You can listen to a stored radio station as follows:
You can store up to:
15 FM stations
15 AM stations
once if you have started listening to the selection.
15 FM stations
Press PROGRAM.
Result: The following indications are displayed:
(option)
1
(option)
2,3
6
5 Mw stations
1
2
3
(CH = Check, 01=Program No, CH 1 = Disc No, – – = Track No on the
disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press PROGRAM.
3
Press PROGRAM again.
Result: The first track selected is displayed, together with the letter CH (Change).
4
Press PROGRAM once or more times until the track to be changed is displayed.
4
5 If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
6 Press and or turn MULTI JOG to select a different track.
7 Press PROGRAM to confirm your change.
8 Press CD/MP3-CD ( ) to start listening to the selection.
Switch the system on by pressing STANDBY/ON.
5
7
To search for a
station...
Press TUNING MODE
Manually
Once or more times until MANUAL
is displayed.
Once or more times until AUTO is
displayed.
5,8
SHUFFLE
DISC SKIP
1
6
6
6
1
7
8
6
+10
6
PROGRAM/SET
2,3,4,7
6
1
SHUFFLE
8
TUNING/
ALBUM
9
VOLUME
TUNING/
ALBUM
TUNING
MODE
4
5
In Tuner mode
+10
TA P 5
E
Select the FM stereo or mono mode by pressing MONO/ST.
If you do not want to store the radio station found, revert to Step 4
and search for another station.
In Preset tuning mode, you can use MULTI JOG or
/
button on the panel front to search a stored radio station.
c Press MEMORY to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
6
5,8
In manual tuning mode, you can use MULTI JOG or
/
button on the panel front to manual search a radio station.
During Tuner auto searching, press
button to stop auto
searching.
b Press TUNING Down and Up to assign a program number
between 1 and 15.
CD REPEAT
CD/MP3-CD
VOLUME
DECK
1/2
MEDLEY
TA P E
DECK
1/2
Improving Radio Reception
CD
CDSYNCHRO
SYNCHRO
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
a Press MEMORY.
Result: The PRGM is displayed for a few seconds.
AI SLEEP
4
4
Otherwise:
TIMER ON/OFF
DISC SKIP
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
5
TUNING
MODE
5,8
To scroll through the frequencies faster when searching
manually, hold down the TUNING Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
2,3
TUNING/
ALBUM
DECK
1/2
CD SYNCHRO
SYNCHRO
CD
CD
SYNCHRO
CD
SYNCHRO
8
Turning MULTI JOG on the front panel to the left or right until the
desired station is found or press
/
to select the desired station.
or Select the desired station by pressing the station number stored,
using the TUNING ALBUM
or
button on the remote control.
Result: The desired station is now received.
CD REPEAT
CD SYNCHRO
5
5
CD/MP3-CD
VOLUME
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing TUNING
or
on the remote control
Select the required frequency band by pressing TUNER (BAND) on
the remote control or TUNER (BAND) again on the front panel.
Press the TUNING MODE button on the front panel of the unit, or the
TUNING MODE button on the remote control until “PRESET” is
displayed.
Select the TUNER function by pressing TUNER.
Select the required frequency band by pressing TUNER (BAND)
again on the front panel or TUNER (BAND) on the remote control.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
Switch the system on by pressing STANDBY/ON.
Select the TUNER function by pressing TUNER on remote control.
4
5
Automatically
Result: The first track selected is played.
1
2
3
CD SYNCHRO
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
You can also use PROGRAM/SET button on the remote control to instead of MEMORY button in step 8.
TUNING
MODE
+10
CD SYNCHRO
16
17
CD Synchro Record Feature
Listening to a Cassette
(This function is not available during playback of an MP3-CD.)
Always treat your cassettes with care; refer, if necessary, to
the section entitled “Precautions When Using Audio Cassettes”
on page 24.
1
2
3
4
5
6
Switch the system on by pressing the STANDBY/ON button.
Select the TAPE function by pressing TAPE on the front panel.
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
If you have inserted two cassettes, press DECK 1/2 on the front
panel or directly the DECK 1/2 button on the remote control to select
the cassette to be played.
You can record a compact disc on a cassette in two different ways:
8
You can record a radio program of your choice.
Synchronised recording
Direct recording
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on
the recording.
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
2
3
4
5
6
7
Select the CD function by pressing CD on the front panel.
Load a compact disc.
Select the required disc.
Select the required track and press CD SYNCHRO or press CD
SYNCHRO directly to start recording at the beginning of the disc.
Result: REC and SYNC are displayed and recording starts.
To stop recording, press
.
1
2
3
4
Switch the system on by pressing STANDBY/ON.
Your mini-compact system has three cassette playback modes
which enable you to listen to both sides of a cassette
automatically.
Press REVERSE MODE until the appropriate symbol is displayed.
5
Press REC/PAUSE.
Result: REC is displayed in red and recording starts.
6
To stop recording, press
Insert a blank cassette in Deck 2.
One side of the selected cassette and
then stops.
Select the TUNER function by pressing TUNER.
One side of the cassette.
The other side of the cassette and then
stops.
Select the radio station that you wish to record by pressing Tuning
or
on the remote control or by press the Tuning Down or
Up on the front panel.
3
1
Both sides of the cassette indefinitely until
you press stop.
.
3
1
To listen to... Press ...
Side A
TAPE (
) once(DECK 1 and DECK 2)
Side B
TAPE (
) twice(DECK 2 only)
Result: The cassette starts playing.
7
4 6 4
When the cassette is stopped, select one of the following functions
as required or on the remote control.
6
Main Unit
5
To...
Rewind the cassette
Fast-forward the cassette
Press...
To...
Rewind the cassette
Fast-forward the cassette
To...
1
2
Press ...
Copying a Cassette (Dubbing)
You can copy a cassette from Deck 1 to Deck 2.
Normal speed dubbing in selecting Tape function mode.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
Press ...
CDSYNCHRO
SYNCHROCD SYNCHRO
CD
SYNCHRO
CD
Stop the playback
Recording a Compact Disc
The direct recording mode enables you to start recording with
any track on the compact disc.
Remote Control
9
Selecting the Cassette Playback
Mode (DECK 2only)
When the display indicates... The mini-compact system plays back...
Switch the system on by pressing STANDBY/ON.
Insert a blank cassette in Deck 2.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
Recording a Radio Program
1
2
3
4
5
6
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Deck 2, as it will
be erased when you start recording.
Switch your system on by pressing STANDBY/ON.
Insert a blank cassette in Deck 2.
Select the CD function by pressing CD on the front panel.
Load the compact disc.
CD
SYNCHRO
CD
CDSYNCHRO
SYNCHRO
Select the required disc.
Select the required track on the compact disc and press
on the front
panel or
on the remote control to set the compact disc player to Pause
mode.
7
Press the REC/PAUSE.
Result: REC is displayed.
8
Press the
to start playing the track.
Result: The track is recorded on the cassette.
9
To stop recording, press
1
2
3
4
Switch your system on by pressing STANDBY/ON.
CD SYNCHRO
Tape Counter
When playing a cassette in one of the cassette decks, a
counter is displayed to enable you to take note of the counter
value at the start of each track to start playback at the
beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Insert a blank cassette in Deck 2.
Insert the tape to be copied in Deck 1.
Each cassette deck has a separate counter.
To copy a cassette at...
Press...
Normal speed
DUBBING
Result: The appropriate indications are displayed and the cassette in
Deck 1 is copied to the cassette in Deck 2.
5
To stop dubbing, press
.
.
1
1
3,6,8
8
8
9
6
9
4
5
18
7
19
GB
Power Surround/Power Surround
XT/Power Sound Function
Mute Function
Timer Function
GB
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If the timer switch on and off times are identical, the word ERROR is
displayed.
1
2
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
2
3
4
5
3,4,5,6,7,8
Press TUNING Down and Up to adjust the volume level and press
ENTER.
Result: The source to be selected is displayed.
7
Turn the MULTI JOG knob to select the source to be played when
the system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of
the decks before setting the
system to standby.
TUNER (radio)
CD (compact disc)
Press ENTER to confirm the timer.
Press STANDBY/ON to set the system to standby mode.
Result:
is displayed to the top of the time, indicating that the timer
has been set. The system will switch on and off automatically
at the required times.
The Power Surround replaces conventional stereo sound
with a wider and more true-to-life sound. It creates the
feeling of being right at the centre of the music and being
surrounded by total music sound.
The function of Power Sound amplifies bass and improves
high key or bass twice as much for you to appreciate
powerful real sound.
The P. SURROUND function is not available if plugging the
Microphone into MIC jack.
AUX
P.SURROUND
TIMER ON/OFF
DEMO/DIMMER
LATIN SOUND
AI SLEEP
PROGRAM/SET
MEDLEY
BAND
To set the timer function
You may use TUNING
or
on the remote control or
/
buttons on the front panel to adjust in step 4, 5, 6, 7.
You can also use PROGRAM/SET button on the remote control
instead of ENTER button in step 3, 4, 5, 6, 7.
Selecting LATIN SOUND
Your mini-compact system is equipped with a preset equalizer
that allows you to choose the most appropriate balance
between treble and bass frequencies, according to the type of
music you are listening to.
This model provides D.S.P modes so that you can enjoy
virtually original sound.
Cancelling the Timer
Turn LATIN SOUND on the front panel or Press LATIN SOUND on
the remote control until the required option is selected.
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Press Timer-On/Off...
Cancel the timer
Once.
Result:
is no longer displayed.
Restart the timer
Twice.
Result:
is displayed again.
a Press ENTER.
b Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
Load one or more compact discs.
MUTE
TUNER
Your mini-compact system is equipped with the function
of Power Surround/Power Surround XT/Power Sound.
Press SURROUND XT button on the front panel until the
required option is selected. Each time the SURROUND XT
button is pressed, “P,SOUND,P,SUR,P,SUR. XT ,OFF” is
selected or cancelled in this order.
6
CD
SYNCHRO
CD
SYNCHRO
CD
CDSYNCHRO
SYNCHRO
6
8
9
2
6
Press ENTER.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
Set the timer switch-off time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER.
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
To switch the sound back on (at the same volume as before), press
MUTE again or the VOLUME buttons.
4,5,7
TIMER is displayed.
Set the timer switch-on time.
a Set the hour by tuning the MULTI JOG knob to the right or to the
left.
b Press ENTER.
Result: The minutes flash.
c Set the minutes by tuning the MULTI JOG knob to the right or to
the left.
d Press ENTER.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
Press MUTE.
1,9
Switch the system on by pressing STANDBY/ON.
Press TIMER/CLOCK until
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
To obtain a...
Select...
Normal balance (linear)
Balance suitable for pop music
Balance suitable for rock music
Balance suitable for classic music
Balance suitable for salsa
Balance suitable for samab
Balance suitable for lambada
PASS
POP
ROCK
CLASSIC
SALSA
SAMBA
LAMBADA
CD SYNCHRO
MUTE
AUX
P.SURROUND
TIMER ON/OFF
DEMO/DIMMER
LATIN SOUND
AI SLEEP
PROGRAM/SET
MEDLEY
DISC SKIP
SHUFFLE
CD REPEAT
TUNER
BAND
CD/MP3-CD
20
21
Setting the System to Switch off
Automatically
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
1
Connecting Headphones
You can connect a set of headphones to your mini-compact
system so that you can listen to music or radio programmers
without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
GB
The following diagrams illustrate the precautions to be taken
when using or moving your mini-compact system.
Connect the headphones to the PHONES jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Press AI SLEEP.
Result: playback starts and the following indications are displayed:
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Press AI SLEEP once or more times to indicate how long the
system should continue playing before it switches off:
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
At any time, you can:
Check the remaining time by pressing AI SLEEP
Change the remaining time by repeating Steps 1 and 2
3
Press AI SLEEP once or more times until AI SLEEP is displayed.
Result: The system will automatically switch off at the end of the disc
or cassette.
4
To cancel SLEEP function, press AI SLEEP once or more times until
OFF is display.
Ambient operating conditions:
Ambient temperature
5°C-35°C
Humidity
10-75%
Microphone Function(option)
Do not expose the unit to direct sun
radiation or other heat sources.
This could lead to overheating and
malfunction of the unit.
The microphone enables the user to mix in his or her vocals
to sing-along with the music or recording .
PROGRAM/SET
AI SLEEP
DISC SKIP
SHUFFLE
MEDLEY
1
2
CD REPEAT
CD/MP3-CD
VOLUME
TUNING/
1
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
1
2
Turn the MIC LEVEL knob to adjust the MIC volume.
Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
Compact Disc Player
Tape Decks
Preparation
Plug the microphone with two 6.3mm mic jacks into microphone terminal.
CD SYNCHRO
To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Prolonged use of headphones at a high volume may damage
your hearing.
90 MIN
2
Cleaning Your Mini-Compact
System
Safety Precautions
Do not place potted plants or vases
on top of the unit. Moisture entering
the unit could lead to dangerous
electric shock and can cause
equipment damage. In such events
immediately disconnect the main
plug from the socket.
During thunderstorms, disconnect
the main plug from the socket.
Main voltage peaks due to lightning could damage the unit.
Press PUSH EJECT(
) to open the cassette deck.
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
3
2
1
VOLUME
UP
1
2
DOWN
Remove the batteries from the
remote control, if not used for any
extended period.
Leaking batteries can cause serious
damage to the remote control.
When using headphones, take care
not to listen at excessive volumes.
Extended use of headphones at
high volumes will lead to hearing
damage.
Do not place heavy items on the
main lead. Main cable damage can
lead to damage of the equipment (fire
hazard) and can cause electric
shock.
Do not remove any equipment panels.
The inside of the unit
contains live components, which
cause electric shock.
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
CD SYNCHRO
22
23
Precautions When Using Compact
Discs
Before Contacting the After-Sales
Service
Technical Specifications
GB
Handle your compact discs with care. Always hold them by the
edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it back
in its case.
Do not fix paper or adhesive tape to the discs and do not write on
the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight,
where they will not be exposed to high temperatures.
Always use compact discs marked
.
It always takes a little time to become familiar with a new appliance.
If you have any of the problems listed below, try the solutions given.
They may save you the time and inconvenience of an unnecessary
service call.
RADIO
Problem
The system does not work
COMPACT
DIGITAL AUDIO
G
E
N
E
R
A
L
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the
safety tab on the upper edge of the cassette. To record a cassette,
where the tab has been broken, simply cover the opening with
adhesive tape.
When you have finished playing a cassette, always put it back in its
case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
There is no sound
C
A
S
S
E
T
T
E
S
R
A
D
I
O
AM (MW)
• The main lead is not correctly plugged into
a wall socket or the wall socket is not
switched on.
• The remote control batteries need replacing
or the polarity has not been respected.
• The STANDBY/ON button has not been
pressed.
Signal/noise ratio
40 dB
Usable sensitivity
60 dB
Total harmonic distortion
2%
• The volume has been completely turned
down.
• The correct function (TUNER, CD, TAPE,
AUX) has not been selected.
• You have connected a set of earphones.
• The loudspeaker wires have been
disconnected.
• The MUTE button has been pressed.
Signal/noise ratio
55 dB
Usable sensitivity
10 dB
Total harmonic distortion
0.6 %
The Timer does not work
• The timer has been stopped by pressing
TIMER ON/OFF.
In case it does not work, even the
action is taken as above.
• Press the P.SURROUND/P.SOUND button
for 5 seconds in power ‘OFF’(standby), then
it is returned the original position (RESET)
C
D
The compact disc player does not
/
start playing
M
P
3
C
D
Checks/Explanation
• The CD function has not been selected.
• The disc has been inserted face down or is
either dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat,
horizontal surface.
• Condensation has formed in the player;
leave the system in a warm, airy room for at
least one hour.
The MP-3 CD player cannot be
played.
• Use the PC to confirm if the extension is
*.mp3.
The tape does not start playing
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
Reception is poor or no radio
stations are received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly
selected.
• The aerial has been disconnected or is not
facing the right way. Turn it until you find the
best orientation.
• You are in a building that blocks radio
waves; you must use an outside aerial.
FM
COMPACT DISC PLAYER
Capacity
3 discs
Frequency range
20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio
85 dB (at 1 KHz) with filter
Distortion
0.05 % (at 1 KHz)
Channel separation
75 dB
Disc sizes
Diameter: 120 or 80 mm. Thickness: 1.2 mm
TAPE DECK
Frequency range
125 Hz ~ 10 KHz
Signal/noise ratio
40 dB
Channel separation
30 dB
Erasing effect
50 dB(without filter)
AMPLIFIER
Output power
Speaker(6 Ω)
Channel separation
Signal/noise ratio
130 Watts/CH RMS,IEC (total harmonic distortion: 10 %)
40 dB
75 dB
GENERAL
Dimensions
270 (D) x 332 (H) x 426 (W) mm
If the above guidelines do not allow you to solve the problem, take a
note of:
The model and serial numbers, normally printed on the rear of
the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
24
25
THIS APPLIANCE IS MANUFACTURED BY:
AH68-01778K
Download PDF

advertising