Samsung SGH-X105 User manual

Samsung SGH-X105 User manual
X105Main English Cover
2/7/04
9:52
Page 1
* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
DUAL BAND
GPRS TELEPHONE
SGH-X105
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-04726A
English. 02/2004. Rev. 1.0
X105.book Page 3 Saturday, February 7, 2004 9:34 AM
Contents
Important Safety Precautions .......................... 7
Unpacking ........................................................ 9
Your Phone..................................................... 10
Phone Layout .................................................... 10
Display............................................................. 13
Service Light..................................................... 16
Getting Started............................................... 17
Installing the SIM Card.......................................
Charging the Battery..........................................
Switching the Phone On or Off.............................
Locking or Unlocking the Keypad .........................
17
19
21
22
Call Functions................................................. 23
Making a Call ....................................................
Adjusting the Volume .........................................
Answering a Call................................................
Viewing Missed Calls ..........................................
Quickly Switching to Silent Mode .........................
23
25
25
26
28
Selecting Functions and Options..................... 29
Phonebook ..................................................... 31
Storing a Number with a Name............................
Using Phonebook Entry Options ...........................
Searching for a Number in Phonebook ..................
Editing a Caller Group ........................................
Speed-dialing....................................................
Deleting All of the Phonebook Entries ...................
Checking the Memory Status...............................
31
34
35
37
38
40
41
Entering Text.................................................. 42
Changing the Text Input Mode ............................
Using T9 Mode ..................................................
Using Alphabet Mode .........................................
Using Number Mode...........................................
Using Symbol Mode ...........................................
43
44
46
47
48
3
X105.book Pages 4 - 5 Saturday, February 7, 2004 9:34 AM
Contents
Contents
Options During a Call...................................... 49
Sound Settings ............................................... 92
Putting a Call on Hold.........................................
Switching the Microphone Off (Mute)....................
Muting or Sending Key Tones ..............................
Searching for a Number in Phonebook ..................
Using the Message Service..................................
Call Waiting ......................................................
Making a Multi-party Call ....................................
Ring Tone (Menu 4.1) .........................................
Ring Volume (Menu 4.2) ......................................
Alert Type (Menu 4.3) .........................................
Keypad Tone (Menu 4.4) .....................................
Message Tone (Menu 4.5)....................................
Power On/Off (Menu 4.6) ....................................
Extra Tones (Menu 4.7) .......................................
49
50
51
51
52
52
53
92
92
93
93
94
95
95
Using the Menus............................................. 55
Phone Settings ............................................... 96
Accessing a Menu Function by Scrolling ................ 55
Using Shortcuts................................................. 56
List of Menu Functions........................................ 57
Display Settings (Menu 5.1) ................................. 96
Greeting Message (Menu 5.2) .............................. 99
Own Number (Menu 5.3) .................................... 100
Language (Menu 5.4) ......................................... 100
Security (Menu 5.5) ........................................... 100
Extra Settings (Menu 5.6) .................................. 104
Short Cut (Menu 5.7) ......................................... 105
Reset Settings (Menu 5.8) .................................. 105
Text Messages................................................ 62
Inbox (Menu 1.1) ...............................................
Outbox (Menu 1.2) .............................................
Write New (Menu 1.3) .........................................
Templates (Menu 1.4) .........................................
Settings (Menu 1.5) ............................................
Delete All (Menu 1.6) ..........................................
Memory Status (Menu 1.7) ..................................
Voice Mail (Menu 1.8) .........................................
Broadcast (Menu 1.9) .........................................
62
64
65
68
68
70
70
71
72
Multimedia Messages ..................................... 74
Inbox (Menu 2.1) ...............................................
Outbox (Menu 2.2) .............................................
Draft (Menu 2.3) ................................................
Write New (Menu 2.4) .........................................
Templates (Menu 2.5) .........................................
Delete All (Menu 2.6) ..........................................
Memory Status (Menu 2.7) ..................................
Setup (Menu 2.8) ...............................................
MMS Profile (Menu 2.9) .......................................
74
77
78
78
82
83
83
84
85
Organizer ..................................................... 106
Alarm (Menu 6.1) ..............................................
Calendar (Menu 6.2) ..........................................
Time & Date (Menu 6.3) .....................................
Calculator (Menu 6.4) ........................................
To Do List (Menu 6.5) ........................................
Voice Memo (Menu 6.6) .....................................
Currency Exchange (Menu 6.7) ...........................
106
108
110
111
112
115
117
Network Services ......................................... 118
Call Diverting (Menu 7.1) ...................................
Call Barring (Menu 7.2) ......................................
Call Waiting (Menu 7.3) ......................................
Network Selection (Menu 7.4) .............................
Caller ID (Menu 7.5) ..........................................
Closed User Group (CUG) (Menu 7.6) ...................
118
120
122
123
124
124
Call Records ................................................... 87
Funbox ......................................................... 126
Missed Calls (Menu 3.1) ......................................
Received Calls (Menu 3.2) ...................................
Dialled Calls (Menu 3.3) ......................................
Delete All (Menu 3.4) ..........................................
Call Time (Menu 3.5) ..........................................
Call Cost (Menu 3.6) ...........................................
WAP Browser (Menu 8.1) ....................................
Games (Menu 8.2).............................................
Sounds (Menu 8.3) ............................................
Images (Menu 8.4) ............................................
Delete All (Menu 8.5) .........................................
Memory Status (Menu 8.6) .................................
4
87
88
88
89
90
91
126
132
135
136
136
137
5
X105.book Page 6 Saturday, February 7, 2004 9:34 AM
Contents
Solving Problems.......................................... 138
Access Codes................................................ 141
Phone Password ...............................................
PIN.................................................................
PUK ................................................................
PIN2 ...............................................................
PUK2 ..............................................................
141
142
142
143
143
Glossary ....................................................... 144
Index ........................................................... 150
Quick Reference Card ................................... 155
6
X105.book Page 7 Saturday, February 7, 2004 9:34 AM
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
X105.book Pages 8 - 9 Saturday, February 7, 2004 9:34 AM
Important Safety Precautions
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Unpacking
Your package contains the following items:
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. You must deactivate any
unnecessary features before you can make an
emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call
until given permission to do so.
Water Resistance
Handset
Travel Adapter
Battery
User’s Manual
Your phone is not water-resistance. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorized accessories
could damage your phone and may be dangerous.
Qualified Service
Only qualified service personnel may install or
repair your phone.
For more detailed safety information, see “Health
and Safety Information” on page 144.
Ear-microphone
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Ear-microphone
• Battery charger
• Standard battery
CAUTION
RISK OF EXPLOSION IF A BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
8
• Simple hands-free kit
• Cigarette lighter adapter
• Car holder
9
X105.book Pages 10 - 11 Saturday, February 7, 2004 9:34 AM
Your Phone
Your Phone
Key(s)
Phone Layout
The following illustrations show the main elements
of your phone:
Description
In Menu mode, scroll through the menu
options and Phonebook.
In Idle mode, allow you to access your
favorite menu options directly. For
further details about shortcuts, see
page 105.
Service light
Earpiece
Ear-microphone
jack
Display
Volume/menu
browse keys
Navigation
(Left/Right/Up/
Down) keys
Soft key (left)
Soft key (right)
Dial/menu
confirmation key
Power on/off /
menu exit key
Cancel/
WAP Browser
key
Alphanumeric
keys
Special
function keys
Microphone
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the current menu.
When entering a number or text, move
the cursor to the left and right
respectively.
In Idle mode, allow you to access your
favorite menu options directly. For
further details about shortcuts, see
page 105.
Perform the functions indicated by the
text above them, on the bottom line of
(soft keys) the display.
In Idle mode, launches the WAP
(Wireless Application Protocol) browser
directly.
When entering a number or text
deletes characters from the display.
In Menu mode, returns to the previous
menu level.
10
11
X105.book Pages 12 - 13 Saturday, February 7, 2004 9:34 AM
Your Phone
Key(s)
Your Phone
Description (continued)
Display
Makes or answers a call.
In Idle mode, recalls the last number
dialed or received when held down.
Display Layout
The display has three areas:
In Menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Icons
Text and
graphic area
Ends a call. Also switches the phone on
and off when held down.
In Menu mode, cancels your input and
returns to Idle mode.
In Idle mode, accesses your voice mail
when held down.
Enter numbers, letters and some
special characters.
Menu
Name
Soft key
indications
Area
Description
First line
Displays various icons. See
page 14.
Middle lines
Display messages, instructions
and any information that you
enter, such as the number you are
dialing.
Last line
Shows the functions currently
assigned to the two soft keys.
Enter special characters.
Perform various functions.
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In Idle mode, adjust the keypad tone
volume.
In Menu mode, scroll through the menu
options and Phonebook.
12
13
X105.book Pages 14 - 15 Saturday, February 7, 2004 9:34 AM
Your Phone
Icons
Icon
Your Phone
Icon
Description (continued)
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when Silent mode is active or
when you set the Alert Type menu (Menu
4.3) so that the phone vibrates when you
receive a call. For further details, see
page 28 and page 93 respectively.
Appears when a call is in progress.
Appears when Mute mode is active.
Appears when you are out of your service
area. When it displays, you cannot make
or receive a call.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Description
Appears when you are connected to the
GPRS network.
Appears when you are out of your home
area and have logged on a different
network; for example, when traveling in
other countries.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when a new multimedia message
has been received.
Indicates that the phone’s keys are locked.
Backlight
A backlight illuminates the display and the keypad.
When you press any key, the backlight turns on. It
turns off when no keys are pressed within a given
period of time, depending on your setting in the
Back Light menu (Menu 5.1.5). After one minute,
the display turns off to conserve your battery
power.
To specify the length of time the backlight is active,
set the Back Light menu (Menu 5.1.5). See
page 98 for further details.
You can also set the phone to use the backlight only
during a specified period of time, in the Auto Light
menu (Menu 5.1.6). See page 98 for further
details.
Appears when you set an alarm to ring at a
specified time.
14
15
X105.book Pages 16 - 17 Saturday, February 7, 2004 9:34 AM
Your Phone
Getting Started
Service Light
The service light is at the top left-hand corner of the
phone. It flashes when services are available on the
phone.
To activate or deactivate the use of the service
light, set the Service Light menu (Menu 5.1.7).
See page 98 for further details.
Service light
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch the phone off by holding
down the
key until the power-off image
displays.
2. Remove the battery. To do so:
➀ Press the battery lock above the battery and
hold it in this position.
➁ Slide the battery and lift it away, as shown.
➀
➁
16
17
X105.book Pages 18 - 19 Saturday, February 7, 2004 9:34 AM
Getting Started
3. Slide the SIM card into the SIM card socket so
that it locks the card into position.
Make sure that the notched corner is top left and
the gold contacts of the card face into the phone.
Getting Started
5. Slide the battery towards the top of the phone
until it clicks into place. Make sure that the
battery is properly installed before switching on
the power.
Charging the Battery
Note: When you need to remove the SIM card,
slide it, as shown, and take it out of the
socket.
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
You can use the phone while the battery is charging,
but this causes the phone to charge more slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
4. Place the battery back, taking care to match the
tabs on the battery with the grooves on the
phone.
18
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at bottom of the phone.
19
X105.book Pages 20 - 21 Saturday, February 7, 2004 9:34 AM
Getting Started
Getting Started
2. Plug the adapter into a standard AC wall outlet.
Switching the Phone On or Off
3. When charging is finished, unplug the adapter
from the power outlet and disconnect it from the
phone by pressing the gray tabs on both sides of
the connector and pulling the connector out.
1. Hold down the
on.
➀
➁
➀
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you hear a warning tone and a
message repeats at regular intervals on the display.
When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level gets too low, the phone
automatically turns off.
key until the phone switches
2. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
“00000000” at the factory. For further details,
see page 141.
3. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 142.
The phone searches for your network and, after
finding it, the idle screen, illustrated below,
appears on the display. Now, you can make or
receive a call.
Service Provider
07:30AM
Wed Mar 06
Menu
Name
Note: The display language is preset to English at
the factory. To change the language, use
the Language menu (Menu 5.4). For
further details, see page 100.
4. When you wish to switch the phone off, hold
down the
key until the power-off image
displays.
If you lock the keypad, before switching the
phone off, you should unlock the keypad by
pressing the Unlock soft key and the
key.
20
21
X105.book Pages 22 - 23 Saturday, February 7, 2004 9:34 AM
Getting Started
Call Functions
Locking or Unlocking the Keypad
You can lock the keypad to avoid pressing keys by
mistake.
Making a Call
In Idle mode, press and hold the
key until the
icon and “Key Pad Locked” appear on the display.
When the idle screen displays, enter the area code
and phone number, and press the
key.
You can answer incoming calls using any keys, even
if you lock the keypad. When you receive a call in
Key Lock mode, the keypad is automatically
unlocked. After the call, Key Lock mode is canceled.
Note: When you activate the Auto Redial option in
the Extra Settings menu (Menu 5.6), the
phone automatically redials up to ten times
when the person does not answer the call or is
already on the phone. See page 104 for further
details.
You can dial emergency calls even if you lock the
keypad. Press an emergency number. When the
confirming message appears, select Yes by
pressing the left soft key or the
key. When you
end the call, your phone returns to Key Lock mode.
To exit Key Lock mode, press the Unlock soft key
and then press the
key again. “Keypad active”
appears and the
icon no longer displays.
You can also set the phone to automatically lock the
keypad in the Auto Key Lock menu (Menu 5.1.3).
For further details, see page 97.
Making an International Call
1. Press and hold the 0 key.
The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Correcting the Number
To clear
the last digit
displayed
22
Press the
key.
any other digit
in the number
Left or Right key until the cursor
is immediately to the right of the
digit to be cleared. Press the
key. You can also insert a missing
digit simply by pressing the
appropriate key.
the whole
display
key and hold it for more
than one second.
23
X105.book Pages 24 - 25 Saturday, February 7, 2004 9:34 AM
Call Functions
Call Functions
Ending a Call
Making a Call from Phonebook
When you want to finish your call, briefly press the
key.
You can store the phone numbers that you use
regularly in the SIM card or the phone’s memory,
which are collectively called Phonebook. Simply
select a name to recall the associated number. For
further details about the Phonebook features, see
page 31.
Redialing the Last Number
The phone stores the numbers you dialed, received
or missed if the caller is identified. See “Call
Records” on page 87 for further details.
To recall any of these numbers:
Adjusting the Volume
1. If you have typed characters on the display,
press the
key to return to Idle mode.
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
2. Press the
key to display a list of the last
numbers in the order you made or received
them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. To
dial the number
In Idle mode, you can also adjust the keypad tone
volume using these keys.
Press the
key.
Answering a Call
delete the number
Options soft key and
select Delete.
When somebody calls you, the phone rings and
displays the incoming call animation.
edit the number
Options soft key and
select Edit Number.
Change the number,
referring to “Correcting
the Number” on
page 23.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
delete all of the
numbers on the
Redial list
24
Press the key to increase the volume level and the
key to decrease the level.
Options soft key and
select Delete All. For
details, see page 89.
1. Press the
key or the Accept soft key to
answer the incoming call.
If the Anykey Answer option in the Extra
Settings menu (Menu 5.6) is activated, you can
press any key to answer a call except for the
key and the Reject soft key. See page 104.
25
X105.book Pages 26 - 27 Saturday, February 7, 2004 9:34 AM
Call Functions
Call Functions
2. End the call by pressing the
key.
Notes:
• You can answer a call while using Phonebook or
menu features.
• You can answer a call in Key Lock mode. After the
call, the mode is canceled.
Editing a Missed Call Number
Note: When the number corresponding to the missed
call is not available, the Edit Number option
does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit
Number option.
Viewing Missed Calls
3. Press the Select soft key.
When you are unable to answer a call for any
reason, you can find out who is calling you, if this
service is available, so that you can call the person
back.
4. Change the number.
The number of calls you missed displays on the idle
screen immediately after a call is missed.
5.
To
Press the
call the number
store the number
To view the missed call immediately:
key.
Save soft key and enter
the name and location.
For further details, see
page 31.
1. Press the View soft key.
The number corresponding to the most recent
missed call displays, if available.
2. To
scroll through the
missed calls
call the number
displayed
Press the
Up or Down key.
key.
edit or delete a missed Select soft key. See
call number
below.
26
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Delete option.
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
(Menu 3.1). For further details, see page 87.
27
X105.book Pages 28 - 29 Saturday, February 7, 2004 9:34 AM
Call Functions
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop
the phone from making noise, in a theater for
example.
In Idle mode, press and hold the
key until the
“Silent Mode” message and the Vibration icon ( )
display.
In Silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert Type (Menu 4.3)
Vibration
Keypad Tone (Menu 4.4)
Off
Message Tone (Menu 4.5)
Light + Vibration
Power off tone
Off
Error Tone (Menu 4.7.1)
Unmark
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit Silent
Mode” appears. The Vibration icon ( ) no longer
displays.
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customize it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys marked
and
. Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
function you are currently using; the label on the
bottom line of the display just above each key
indicates its current role.
Example:
Service Provider
07:30AM
Wed Mar 06
Menu
Name
Note: When you turn your phone off, Silent Mode is
automatically deactivated.
Press the left soft
key to access Menu
mode.
28
Press the right soft
key to access the
Phonebook feature.
29
X105.book Pages 30 - 31 Saturday, February 7, 2004 9:34 AM
Selecting Functions and Options
Phonebook
To view the various function and options available
and to select the one you want:
1. Press the appropriate soft key.
2.
To
Press the
select the:
• function displayed
• option highlighted
Select soft key or
the Right key.
You can store phone numbers and their
corresponding names in your SIM card and phone’s
memories. They are physically separate but are
used as a single entity, called Phonebook.
Storing a Number with a Name
There are two ways to store a number:
view the next function Down key or key on
the left side of the
or highlight the next
phone.
option on a list
• Using the Save soft key in Idle mode
• Using the New Entry option in the Phonebook
menu
move back to the
previous function or
option on a list
Up key or key on the
left side of the phone.
Storing a Number in Idle Mode
move back up one
level in the structure
Left key,
key.
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
exit the structure
without changing the
settings
key.
soft key or
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active so that you
can select it directly.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the
key. For
further details, see page 23.
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
•
: Mobile phone number
•
: Office number
•
: Home number
To select the category, press the Left or Right
key and press the Select soft key.
30
31
X105.book Pages 32 - 33 Saturday, February 7, 2004 9:34 AM
Phonebook
Phonebook
4. Select a memory location, either SIM or Phone,
by pressing the Up or Down key and press the
Select soft key.
Note: If you change phones, any numbers stored
in your SIM card memory are automatically
available with the new phone, whereas any
numbers stored in the phone’s memory
must be reentered.
5. Enter a name and press the OK soft key.
The maximum length you can enter for a name
depends on your SIM card. For further details
about how to enter characters, see page 42.
6. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phonebook
entry or name just created.
8. To
use the entry options
return to the idle
screen
32
Storing a Number Using the Phonebook
Menu
1. When the idle screen displays, press the Name
soft key.
2. Scroll to New Entry by pressing the Up or Down
key and press the Select soft key.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Select soft key.
Note: The E-mail icon (
) is available in this
step. It allows you to save an E-mail
address instead of a phone number.
4. Select a memory location, either SIM or Phone,
by pressing the Up or Down key and press the
Select soft key
5. Enter a name and press the OK soft key.
The maximum length you can enter for a name
depends on your SIM card. For further details
about how to enter characters, see page 42.
Press the
6. Enter the number or address you want to store
and press the Save soft key.
Options soft key. For
further details, see
page 34.
7. Continue the procedure from step 6 on page 32
to store the number.
key.
33
X105.book Pages 34 - 35 Saturday, February 7, 2004 9:34 AM
Phonebook
Phonebook
Using Phonebook Entry Options
While accessing any Phonebook entry, press the
Options soft key to access the options for the
entry.
Caller Group: allows you to organize your
Phonebook entries in caller groups so that the
phone alerts you in a specific way when a person
from one of your groups calls you. Select one of the
ten groups available.
To
Press the
To remove an entry from a group, select the No
Group option.
select the
highlighted option
Select soft key or the Right
key.
For further details about how to change caller group
properties, see page 37.
highlight a different Up or Down key until the
option
option you want highlights.
Add Entry: allows you to add a new number to the
selected name.
The following options are available:
Paste: allows you to paste the number into the
normal dialing mode. Use this option to dial a
number similar to one in Phonebook, such as a
different extension in the same office.
Use the
key to change the number as
required; see page 23 for further details. When you
are ready to dial, press the
key.
Edit: allows you to edit the name and/or number.
Delete: allows you to delete the name and number
from Phonebook. You are asked to confirm that you
wish to delete the name and number by pressing
the Yes soft key.
Copy: allows you to copy the number to another
location. You can select the memory and the
location number.
34
Searching for a Number in
Phonebook
After storing numbers in Phonebook, you can
search for them in two ways; by name and by caller
group.
Searching for a Number by Name
1. When the idle screen displays, press the Name
soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name that you
want to find.
The Phonebook entries are listed, starting with
the first entry matching your input.
35
X105.book Pages 36 - 37 Saturday, February 7, 2004 9:34 AM
Phonebook
4. To
Phonebook
Press the
5. To
Press the
view the highlighted
entry
View soft key.
view the highlighted
entry
View soft key.
select a different
entry
Up or Down key until the
entry highlights.
select a different
entry
look for a name
starting with a
different letter
key labeled with the
letter you want.
Up or Down key until the
entry you want
highlights.
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 34.
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 34.
Editing a Caller Group
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Search by pressing the Up or
Down key and press the Select soft key. You are
asked to enter a group name.
3. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
4. If necessary, scroll to a group by pressing the Up
or Down key and press the View soft key.
The Phonebook entries in the caller group are
listed.
36
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Group Edit by pressing the Up or
Down key and press the Select soft key.
3. Scroll through the group list by pressing the Up
or Down key.
4. When the group you want highlights, press the
Options soft key.
5. Select each option and change the settings, as
required. The following options are available:
• Call Ring Tone: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
• SMS Tone: allows you to set a ring tone to be
used when you receive a text message from a
person in the group.
37
X105.book Pages 38 - 39 Saturday, February 7, 2004 9:34 AM
Phonebook
Phonebook
• Graphic: allows you to set a graphic icon to
be displayed when you receive a voice call
from a person in the group.
• Group Name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 42.
6. When you are finished, press the
key.
or
Speed-dialing
Once you have stored phone numbers in the SIM
card, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed Dial by pressing the Up or
Down key and press the Select soft key.
3. Select the key to which you wish to assign the
speed-dialing number, from the 2 to 9 keys, and
press the OK soft key.
4. Select a Phonebook entry from the list and press
the View soft key.
5. Select a number, if the entry has more than one
number by pressing the Up or Down key and
press the Select soft key.
6. Once you have assigned a number to the key,
you can use the following options by pressing
the Options soft key:
• Change: allows you to assign a different
number to the key.
• Delete: allows you to clear the setting so that
no number is assigned to the key.
• Delete All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
• Number: allows you to view the number
assigned to the key.
7. When you are finished, press the
key.
or
Speed-dialing from Phonebook
To speed-dial the numbers assigned to keys, 2 to 9,
press and hold the appropriate key.
Note: Memory location 1 is reserved for your Voice
Mail server number.
If you have already assigned a number to the
key, the Options soft key replaces the OK soft
key. Go to step 6.
38
39
X105.book Pages 40 - 41 Saturday, February 7, 2004 9:34 AM
Phonebook
Phonebook
Deleting All of the Phonebook Entries
Checking the Memory Status
You can delete all of entries in the selected memory
or both memories.
You can check how many names and numbers are
stored in Phonebook; SIM card and phone
memories. You can also see the capacity of both
memories.
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Delete All by pressing the Up or Down
key and press the Select soft key.
3. To place a check mark on the memory you want
to empty, All, SIM or Phone, press the Mark
soft key.
You can remove the check mark by pressing the
Unmark soft key.
4. When you are finished marking, press the
Delete soft key to delete the entries in the
selected memory.
1. When the idle screen displays, press the Name
soft key.
2. Select the Memory Status option by pressing
the Up or Down key and press the Select soft
key.
3. Press the Up or Down key to view the number of
existing and remaining entries available in the
card and phone’s memory.
4. When you are finished, press the
key.
or
5. Enter the phone password and press the OK soft
key.
Note: The password is preset to “00000000” at
the factory. To change it, see page 102.
6. When the confirming message appears, press
the Yes soft key.
7. When you are finished, press the
key.
40
or
41
X105.book Pages 42 - 43 Saturday, February 7, 2004 9:34 AM
Entering Text
Entering Text
Changing the Text Input Mode
When using your phone, you will often need to
enter text, such as when storing a name in
Phonebook, creating your personal greeting or
scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing a text message
Your phone has the following text input modes:
Write New
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter; for example, when you
press the 5 key once, J, K or L displays. T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the
correct word, thus requiring far fewer keystrokes
than the traditional Alphabet mode.
• Alphabet mode
These modes allow you to enter letters by
pressing the key labeled with the letter you want
to enter once, twice, three or four times until it
displays.
• Number mode
This mode allows you to enter numbers.
Options
To select
Text input
mode indicator
Press the right soft key
until
T9 mode
displays. See page 44.
Alphabet mode
displays. See page 46.
Number mode
Symbol mode
displays. See page 47.
the symbol list displays.
See page 48.
• Symbol mode
This mode allows you to enter various symbols
and special characters.
42
43
X105.book Pages 44 - 45 Saturday, February 7, 2004 9:34 AM
Entering Text
Entering Text
Using T9 Mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes. This
text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word
by pressing the 2 to 9 keys. Press each key only
once for each letter.
Example: To enter “HELLO” in T9 mode,
press the 4, 3, 5, 5 and 6 keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. When the word displays correctly, go to step 4.
If not, press the 0, Up or Down key repeatedly
to display alternative word choices for the keys
that you have pressed.
Example: Both “OF” and “ME” have the
sequence 6 and 3. The phone displays
the most commonly used choice first.
4. Put a space by pressing the
entering the next word.
key and start
2. When you press the 0 or Down key at the last
alternative word, the display shows Add on the
bottom line. Press the Add soft key.
3. If necessary, clear the word using the C key and
enter the word you want to add using Alphabet
mode. See page 46.
4. Press the OK soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress.
• To enter full stops, hyphens or apostrophes, press
the 1 key. T9 mode applies grammar rules to
ensure that the correct punctuation is used.
Example: The 1 key is used twice to display two
punctuation marks:
L
E
T
’
S
E
A
• To shift the case in T9 mode, use the
There are three cases; Lower case (
Capital (
) and Capital lock (
).
T
.
key.
), Initial
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
key.
Press and hold the
key to clear the display.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the 0 or Down key
to display the alternative words.
44
45
X105.book Pages 46 - 47 Saturday, February 7, 2004 9:34 AM
Entering Text
Entering Text
Using Alphabet Mode
• To insert a space, press the
Use the 1 to 0 keys to enter your text.
• To shift the case in Alphabet mode, use the
key. There are three cases; Lower case (
),
Initial Capital (
) and Capital lock (
).
1. Press the keys labeled with the required letter:
key.
• You can move the cursor by using the Left and
Right keys. To delete letters, press the
key.
Press and hold the
key to clear the display.
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
to the right automatically, and then select the
next letter.
Using Number Mode
Number mode enables you to enter numbers into a
text message. Press the keys corresponding to the
digits you want to enter.
Refer to the table below for further details about the
characters available.
Key
Characters in the Order Displayed
Upper Case
Lower Case
Space
46
47
X105.book Page 48 Saturday, February 7, 2004 9:34 AM
Entering Text
Using Symbol Mode
Symbol mode enables you to insert symbols into a
text message.
SYMBOL
1
2
3
4
5
6
7
8 :
9
OK
Back
To select
Press the
select a symbol
corresponding number key.
display more symbols
Up or Down key.
clear the symbol(s)
C key. When the input field
is empty, this key returns
the screen to the previous
mode.
insert the symbol(s)
into your message
OK soft key.
cancel your input and Back soft key.
return to the previous
mode
48
X105.book Page 49 Saturday, February 7, 2004 9:34 AM
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively,
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you
may switch between the two calls, changing the one
on hold to active and placing the other on hold.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
When you want to finish, end each call normally by
pressing the
key.
49
X105.book Pages 50 - 51 Saturday, February 7, 2004 9:34 AM
Options During a Call
Options During a Call
Switching the Microphone Off (Mute)
Muting or Sending Key Tones
You can temporarily switch your phone’s
microphone off so that the other person on the
phone cannot hear you.
These options allow you to turn the key tones off or
on. If the Mute Keys option is selected, your phone
does not transmit the DTMF (Dual Tone MultiFrequency) tones of the keys. It allows you to press
keys without hearing annoying key tones during a
call.
Example: You wish to say something to another
person in the room but do not want the
person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight
the Mute option.
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight
the Unmute option.
3. Press the OK soft key.
The other person can hear you again.
Note: To communicate with answering machines or
computerized telephone systems, the Send
Keys option must be selected.
Searching for a Number in
Phonebook
You can search for a number in Phonebook during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook
option.
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the
first entry matching your input.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phonebook feature,
see page 31.
50
51
X105.book Pages 52 - 53 Saturday, February 7, 2004 9:34 AM
Options During a Call
Options During a Call
Using the Message Service
Making a Multi-party Call
If you receive an SMS (Short Message Service)
message during a call, the Message icon ( )
flashes on the display. The SMS Service option
enables you to use this feature.
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call.
For further details about the Message feature, see
page 62.
For further details about subscribing to this service,
contact your service provider.
Setting up the Multi-party Call
Call Waiting
1. Call the first participant in the normal way.
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call Waiting menu
(Menu 7.3) to Activate; see page 122. You are
notified of an incoming call by a call waiting tone.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End Held Call option.
To end the current call, press the
key.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the OK soft key.
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options soft key. Select the Join option and
press the OK soft key.
You can add incoming callers by answering the call
and pressing the Options soft key, and selecting
the Join option. Repeat as required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select soft
key or the
key.
52
53
X105.book Pages 54 - 55 Saturday, February 7, 2004 9:34 AM
Options During a Call
Using the Menus
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately to that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
All the multi-party call participants can now hear
each other.
Dropping One Participant
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select soft
key or the
key.
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling using the Navigation keys or by using the
shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access
Menu mode.
2. Scroll using the Up or Down key to reach a main
menu, Phone Settings for example. Press the
Select soft key or the Right key to enter the
menu.
3. If the menu contains sub-menus, Language for
example, you can access them by scrolling using
the Up or Down key and pressing the Select
soft key or the Right key.
If the menu that you have selected contains
further options, repeat this step.
3. Press the Down key to select the Remove
option and press the OK soft key.
The call ends with that participant, but you can
continue to talk to the other participants.
4. When you want to end the multi-party call,
press the
key.
4.
To
Press the
scroll through the
menus
Up or Down key, or use
the Volume keys.
confirm the chosen
setting
Select soft key or the
Right key.
return to the previous
soft key or the Left
menu level
key.
exit the menu without
changing the settings
54
key.
55
X105.book Pages 56 - 57 Saturday, February 7, 2004 9:34 AM
Using the Menus
Using the Menus
Using Shortcuts
List of Menu Functions
The menu items, such as the menu, sub-menus and
options, are numbered and can be accessed quickly
by using their shortcut numbers. The shortcut
number is shown at the bottom right next to the
soft key on the display. Simply press the Menu soft
key and enter the number of the menu you want.
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
Note: The numbers assigned to each menu option are
indicated on the list on page 57. They may not
match the menu number on the phone,
depending on the services supported by your
SIM card.
Example: Accessing the Language option.
1. Press the Menu soft key.
2. Press the 5 key for Phone Settings.
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu displays
when you press the Menu soft key to enter
Menu mode. For further details, see your SIM
card instructions.
1. Text Messages
1.1
1.2
1.3
1.4
1.5
3. Press the 4 key for Language.
The languages available display.
1.6
1.7
1.8
1.9
(see page 62)
Inbox
Outbox
Write New
Templates
Settings
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Common Setting
Delete All
Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
Voice Mail
1.8.1 Call Voice Mail
1.8.2 Voice Server Number
Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
* Shows only if supported by your SIM card.
56
57
X105.book Pages 58 - 59 Saturday, February 7, 2004 9:34 AM
Using the Menus
Using the Menus
2. Multimedia Messages
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
(see page 74)
Inbox
Outbox
Draft
Write New
Templates
Delete All
Memory Status
Setup
MMS Profile
3. Call Records
(see page 87)
3.1
3.2
3.3
3.4
3.5
Missed Calls
Received Calls
Dialled Calls
Delete All
Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost*
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
4. Sound Settings
Ring Tone
Ring Volume
Alert Type
Keypad Tone
Message Tone
4.5.1 SMS Tone
4.5.2 SMS-CB Tone
4.6 Power On/Off
4.7 Extra Tones
* Shows only if supported by your SIM card.
(see page 96)
5.1 Display Settings
5.1.1 Wallpaper
5.1.2 Menu Style
5.1.3 Auto Key Lock
5.1.4 Brightness
5.1.5 Back Light
5.1.6 Auto Light
5.1.7 Service Light
5.1.8 Graphic Logo
5.2 Greeting Message
5.3 Own Number
5.4 Language
5.5 Security
5.5.1 PIN Check
5.5.2 Change PIN
5.5.3 Phone Lock
5.5.4 Change Password
5.5.5 SIM Lock
5.5.6 FDN Mode*
5.5.7 Change PIN2*
5.6 Extra Settings
5.7 Short Cut
5.7.1 Key Up
5.7.2 Key Down
5.7.3 Key Right
5.7.4 Key Left
5.8 Reset Settings
6. Organizer
(see page 92)
4.1
4.2
4.3
4.4
4.5
58
5. Phone Settings
(see page 106)
6.1 Alarm
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.2 Calendar
Once Alarm
Daily Alarm
Morning Call
Remove Alarm
Autopower
* Shows only if supported by your SIM card.
59
X105.book Pages 60 - 61 Saturday, February 7, 2004 9:34 AM
Using the Menus
6. Organizer
Using the Menus
(continued)
6.3 Time & Date
6.3.1 Set Time
6.3.2 Set Date
6.3.3 World Time
6.3.4 Time Format
6.4 Calculator
6.5 To Do List
6.6 Voice Memo
6.7 Currency Exchange
7. Network Services
(see page 118)
7.1 Call Diverting
7.1.1 Divert Always
7.1.2 Busy
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
7.2 Call Barring
9.2.1 All Outgoing
9.2.2 International
9.2.3 International Except to Home
9.2.4 All Incoming
9.2.5 Incoming While Abroad
9.2.6 Cancel All
9.2.7 Change Barring Password
7.3 Call Waiting
7.4 Network Selection
7.5 Caller ID
7.6 Closed User Group
60
8. Funbox
(see page 126)
8.1 WAP Browser
8.1.1 Home
8.1.2 Favorite
8.1.3 http://
8.1.4 Settings
8.1.5 Clear Cache
8.1.6 Push Message
8.2 Games
8.3 Sounds
8.4 Images
8.5 Delete All
8.6 Memory Status
61
X105.book Pages 62 - 63 Saturday, February 7, 2004 9:34 AM
Text Messages
Text Messages
Short Message Service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to include simple pictures,
melodies, and animated images in your messages.
To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have
received new text messages. If the memory is full,
an error message displays and you cannot receive
any new messages. Use the Delete option in each
message box to delete obsolete ones.
While reading a message, you can choose the
following options by pressing the Options soft key:
Delete: allows you to delete the message.
Forward: allows you to forward the message. For
further details about how to send a message, see
page 65.
Text Reply: allows you to reply to the sender by
sending a text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the destination
number and URL, e-mail addresses or phone
numbers from the message text.
When you receive a new message in Key Lock
mode, you can’t view it without unlocking the
keypad. Press the Unlock soft key and the
key
to unlock.
Move to Phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available when you select a message
stored in the SIM card.
Inbox
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
(Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phonebook.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 67.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up or
Down key.
3. To scroll to the previous or next message, press
the
or
key.
62
63
X105.book Pages 64 - 65 Saturday, February 7, 2004 9:34 AM
Text Messages
Outbox
Text Messages
This message box is used to store the messages
that you have already sent or will send.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 67.
When you enter this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phonebook.
Write New
1. Select a message from the list and press the
View soft key to read the message contents.
In this menu option, you can write and send a text
message.
2. To scroll through the contents, press the Up or
Down key.
Note: You can enter up to 918 alphanumeric
characters for your message. When you add
media objects to the message, the number of
characters you can enter decreases.
(Menu 1.2)
3. To scroll to the previous or next message, press
the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft key:
(Menu 1.3)
Creating a Simple Text Message
1. Create your message.
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further details about how to send a message, see
page 65.
Cut Address: allows you to extract the destination
number and URL, e-mail addresses or phone
numbers from the message text.
Move to Phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
64
Note: For further details about entering
characters, see page 42.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
• Send Only: allows you to send the message.
The message is deleted after sending.
• Save and Send: allows you to save a copy of
the message and then send the message. You
can read the message in your Outbox.
• Save Only: allows you to save the message
so that it can be sent later. You can read the
message in your Outbox.
• For further details about Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and Language
options, see page 66.
65
X105.book Pages 66 - 67 Saturday, February 7, 2004 9:34 AM
Text Messages
3. Select Send Only or Save and Send, and press
the Select soft key.
If you want to just save the message, select
Save Only. After saving the message, the
phone returns to the Text Messages menu.
4. If you select a save option, choose the memory
where you want to save the message and press
the OK soft key.
5. Enter a destination number and press the OK
soft key.
The message is sent.
Note: When the phone fails to send the message, it
asks you if you want to retry. Press the OK soft
key to confirm. Otherwise, press the Exit soft
key.
Creating a Message Using the Options
1. Create a message.
2. Press the Options soft key.
Text Messages
• Add Objects: allows you to add the required
sound, melody, picture or animated image to
your message. Select the category of the
object to be added. In each category, you can
select from the various factory-set items or
choose an item received from other sources,
such as the Internet or other phones.
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu (Menu 1.4). For further
details, see page 68.
• Add Phonebook: allows you to add a
Phonebook entry in your message. Select one
from the list.
• Add Bookmark: allows you to add a web
page’s address stored in your Favorite list
(Menu 8.1.2). Select one from the list.
• Language: allows you to change the language
to be used in T9 mode. Select the language to
be used.
4. Complete the message, and send or save it by
following the procedure from step 2 on page 65.
3. Select one of the following options by using the
Up and Down keys and pressing the Select soft
key:
• Text Formatting: allows you to format the
style of the text.
For the Size attribute, Normal, Large and
Small sizes are available. For the Underline
and Strikethrough attributes, select On or
Off.
The attributes can be combined.
66
67
X105.book Pages 68 - 69 Saturday, February 7, 2004 9:34 AM
Text Messages
Templates
Text Messages
(Menu 1.4)
Setting x (where x is the setting group number):
each group has its own sub-menu.
Using this menu, you can preset up to nine
messages that you use most frequently.
Service Center: allows you to store or change the
number of your message center, which is required
when sending messages. You must obtain this
number from your service provider.
Scroll through the template list using the Up and
Down keys. When the message template you want
highlights, press the Options soft key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter
characters, see page 42.
Send Message: allows you to recall the message.
Once you have completed the message, you can
send, save and send, or simply save it. For further
details about how to send a message, see page 65.
Delete: allows you to delete the message. You are
asked to confirm the deletion by pressing the Yes
soft key.
Settings
(Menu 1.5)
In this menu, you can set up default message
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Note: The last setting you accessed is automatically
activated for sending messages.
68
Default Destination: allows you to store the default
destination number. The number will automatically
display on the Destination screen when you create a
message.
Default Type: allows you to set the default message
type to Text, Fax, Email or Paging. The network
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
your text messages are stored at the message
center while attempts are made to deliver them.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: The following options are
available:
Reply Path: allows the recipient of your SMS
message to send you a reply message through your
message center, if your network supports this
service.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
69
X105.book Pages 70 - 71 Saturday, February 7, 2004 9:34 AM
Text Messages
Delete All
Text Messages
(Menu 1.6)
This menu allows you to delete all of the text
messages in each message box. You can also delete
all of your messages at one time.
Voice Mail
(Menu 1.8)
This menu provides you with a way of accessing
your voice mailbox, if your network supports this
service.
The following options are available:
To
Press the
select a message box
to clear
Up or Down key. To delete
all of your messages,
select All Messages.
place a check mark
Mark soft key.
remove the check
mark
Unmark soft key.
You can quickly connect to the voice server by
pressing and holding the 1 key in Idle mode.
delete the marked
messages
Delete soft key.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status
Call Voice Mail: before using the Voice Mail
feature, you must enter the voice server number
obtained from your service provider; see Menu
1.8.2. You can then select this option and press the
OK soft key to listen to your messages.
To
Press the
enter the server
number
corresponding numeric
keys.
correct a digit
key.
(Menu 1.7)
This menu option shows how many messages are
currently stored in the SIM, phone and CB (cell
broadcast) memories.
move the cursor to the
left/right without
clearing the digit
Left or Right key.
Note: Voice Mail is a network feature. Please contact
your service provider for further details.
70
71
X105.book Pages 72 - 73 Saturday, February 7, 2004 9:34 AM
Text Messages
Broadcast
Text Messages
(Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages display as soon as they are
received, provided that:
Language: allows you to select your preferred
language to display cell broadcast messages.
Please contact your service provider for further
details.
• the phone is in Idle mode.
• the Receive option is set to Enable.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message.
Volatile displays the messages from the network,
but loses its contents as soon as the phone is
switched off. Scroll through the message by using
the Up and Down keys. While reading a message,
press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them respectively. A
check mark displays in front of each selected
channel.
Add Channel: use to enter the ID and title for a new
channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing
channel.
72
73
X105.book Pages 74 - 75 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
Multimedia Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
2. To scroll through the message information,
press the Up or Down key.
3. Press the Options soft key to access the
following options:
• Retrieve: retrieves the message from the
MMS server.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive and
send multimedia messages that contain multimedia
files, such as sounds and images you downloaded
from the Internet and voice memos you recorded.
This function is available only if it is supported by
your service provider. Only phones that offer
multimedia message features can receive and
display multimedia messages.
• Delete: deletes the message.
• More Information: shows you detailed
information about the message.
4. To read the message, press the Select soft key
when Retrieve is highlighted.
Your phone retrieves the message contents from
the server and displays it.
5. To scroll through the message, press the Up or
Down key.
6. When you are finished, press the
Inbox
(Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the text notification along with the
sender’s number.
1. Press the View soft key to view brief
information about the message, such as the
sender’s number, the message size and the
subject.
If you want to view the message later in the
Inbox, press the Exit soft key.
74
key.
Viewing a Received Message in the Inbox
When you access the Inbox menu (Menu 2.1), the
list of multimedia messages you received displays
with the senders’ phone numbers, if they are
available in your Phonebook, or subjects. The icons
on the left tells you the status of the messages.
•
: Messages you already read.
•
: Messages you haven’t read yet.
1. Select a message and press the Select soft key.
2. To scroll through the message, press the Up or
Down key.
75
X105.book Pages 76 - 77 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
Multimedia Messages
3. Press the OK soft key on the message
presentation screen.
Outbox
While viewing a message, you can choose the
Message options by pressing the Options soft key.
When you access this menu option, the list of the
picture messages you sent or saved displays. The
icons on the left tells you the status of the
messages.
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See page 75.
When you are reviewing a message retrieved from
the MMS server, the following options are available:
Delete: deletes the message.
•
•
•
•
•
:
:
:
:
:
(Menu 2.2)
Messages
Messages
Messages
Messages
Messages
currently being sent
sent
your phone couldn’t send
to be send
deferred
Reply: allows you to reply to the sender by sending
a text or picture message.
1. Select a message and press the Select soft key.
Callback: allows you to call the sender back.
2. To scroll through the message, press the Up or
Down key.
Cut Address: allows you to extract the sender’s
number or e-mail address and URL, e-mail
addresses or phone numbers from the message
text.
3. Press the OK soft key on the message
presentation screen.
Forward: allows you to forward the message to
another person.
Save Picture: allows you to save an image from
the message into your phone. Images are stored in
the Images menu (Menu 8.4).
Save Sound: allows you to save a sound from the
message into the Sounds menu (Menu 8.3).
Information: shows you information about the
message, such as the subject, sender’s address,
message size, status and priority.
76
While viewing a message, you can choose the
following options by pressing the Options soft key:
Delete: deletes the message.
Cut Address: allows you to extract the destination
numbers or e-mail addresses and URL, e-mail
addresses or phone numbers from the message
text.
Send: allows you to resend the message.
Edit Message: allows you to change the message
contents, sound, picture or text.
Information: shows you information about the
message, such as the subject, recipient’s address,
message size, status and priority.
77
X105.book Pages 78 - 79 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
Draft
(Menu 2.3)
Multimedia Messages
not be able to add some downloaded images if
they are not in the correct format.
After creating a picture message, you can store it in
this message box for later sending. Or, if you are
interrupted while making a message by an
incoming call or message, your message is
automatically saved in this box.
• Add Sound: allows you to add a sound. You
can record a new voice memo or use a sound
stored in the Sounds menu (Menu 8.3). You
may not be able to add some downloaded
images if they are not in the correct format.
For further details about viewing a message, see
“Outbox” on page 77.
• Send: allows you to send the message. Use
this option when you finish creating the
message. This option is activated after you
add a content to the message.
Write New
• Save: saves the message in the Draft (Menu
2.3) or Templates (Menu 2.5) box for later
use. This option is activated after you add a
content to the message.
(Menu 2.4)
This menu option allows you to create a new picture
message and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the
OK soft key.
For further details about entering characters,
see page 42.
2. When Add Here highlights, press the Options
soft key and add the message contents using
one of the following options:
• Add Text: Enter the message text and press
the OK soft key.
• Add Picture: allows you to add a picture
stored in the Images (Menu 8.4). Choose a
picture and press the Select soft key. You may
• Settings: allows you to change the message
settings. For further details about each setting
option, see page 83. After changing, you need
to press the
soft key or the
key to go
to back to the options screen.
• Add Destination: allows you to enter
destination addresses. See steps 7 to 10.
After. adding, you need to press the
soft
key or the
key to go to back to the
options screen.
• Preview: shows your message as it will
display on the recipient’s phone.
Note: You can use the adding options only one
time for one page.
3. The added content displays.
4. Repeat steps 2 and 3 until you finish creating
your message.
78
79
X105.book Pages 80 - 81 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
5. If you want to change the added items, press
the Up or Down key to highlight one and press
the Options soft key. The following options are
available:
• Edit Text/Picture/Sound: allows you to
change the text or replace the image or sound
with another one.
• Add Page: allows you to add more pages.
After adding pages, you can move to each
page using the Left or Right key on the
message screen.
• Delete: deletes the item from your message.
• Duration: allows you to set how long one
page displays. After a specified length of time,
the display scrolls to the next page.
• Send: allows you to send the message.
• Save: saves the message in the Draft (Menu
2.3) or Templates (Menu 2.5) box for later
use.
• Settings: allows you to change the message
settings. For further details about each setting
option, see page 83.
• Add Destination: allows you to enter
destination addresses. See steps 7 to 10.
• Preview: shows your message as it will
display on the recipient’s phone.
Note: The options available are different
depending on whether the item selected on
the message screen is text, an image or
sound.
Multimedia Messages
7. Select a destination type, To, Cc or Bcc, to
enter a number or address and press the Select
soft key.
8. Choose one of the following options and press
the Select soft key:
• Phone Number: allows you to enter the
phone number you want.
• E-Mail: allows you to enter the e-mail address
of the recipient to send the message as an email.
• Phone Book: allows you to recall a number
from your Phonebook.
9. Enter a number or an e-mail address, or select
a number from Phonebook.
Note: When entering a number, you can also
select a number from Phonebook using the
Name soft key.
10. When the correct number or address displays,
press the OK soft key.
11. To send the message to multiple destinations,
select Add Destination and press the Select
soft key.Repeat from step 8.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
12. When you are finished adding the numbers or
addresses to the destination type, press the C
key or the
soft key.
6. When you are finished creating the message,
choose Send from the options and press the
Select soft key.
80
81
X105.book Pages 82 - 83 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
13. To enter additional numbers or addresses,
repeat steps 7 through 12.
You can enter up to 10 destinations each for
To, CC and Bcc.
14. When you are finished entering the
destinations, select Send Message and press
the Select soft key.
Your phone sends the message.
Templates
(Menu 2.5)
This menu stores messages you saved as templates
so that you can use them to make new messages.
1. Scroll through the template list using the Up or
Down keys.
2. When the message template you want
highlights, press the Select soft key.
3. Press the OK soft key to use the following
options, or the display automatically shows the
options after a specified time:
• Edit Message: allows you to send a message
using the template. For further details about
how to send a message, see page 78.
• Delete: allows you to delete the message. You
are asked to confirm the deletion by pressing
the Yes soft key.
4. Press the
82
Multimedia Messages
Delete All
(Menu 2.6)
This menu allows you to delete all of the picture
messages in each message box, Inbox, Outbox,
Draft and Templates.
To
Press the
select a message box
to clear
Up or Down key. To delete
all of your messages,
select All Messages.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
Memory Status
(Menu 2.7)
You can check the amount of the memory being
used and the memory remaining for multimedia
messages.
Each time you press the Next soft key, the display
shows the total space, including the used and free
space. It also shows how much space is currently
occupied by each message box.
key to return to Idle mode.
83
X105.book Pages 84 - 85 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
Setup
(Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
Multimedia Messages
Page Duration: you can set how long one page of
the received message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
The following options are available:
Delivery Report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto Download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications. When this option
is enabled, the phone automatically retrieves new
messages from the server. As soon as you receive a
message you can use more options while you are
reading it. See page 76 for details about the
options.
Message Acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry Date: you can select the length of time
your messages are stored at the message center
after they are sent.
Delivery Time: you can set the delay time before
the phone sends your messages.
Priority: you can select the priority level of your
messages.
Report Allowed: when this option is disabled, the
sender of an incoming message does not receive a
delivery report from the network.
84
MMS Profile
(Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or receive
multimedia messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• In most cases, you don’t need to change these
settings. If you change them without the service
provider’s instruction, the MMS feature may not
work properly.
The following options are available for each profile:
Profile Name: enter a name that you wish to
assign to the MMS server.
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorized
access; otherwise, choose Non-Secure.
IP Address: enter the gateway address required to
connect to the MMS server.
User Name: enter the user ID required to connect
to the MMS server.
Password: enter the password required to connect
to the MMS server.
85
X105.book Pages 86 - 87 Saturday, February 7, 2004 9:34 AM
Multimedia Messages
Call Records
APN: enter the access point name used for the
address of the MMS server.
In this menu, you can view the:
For further details, contact your service provider.
• calls you missed, received or dialed.
• length of your calls.
• cost of your calls.
Note: You can access the numbers in the three types
of call records by pressing the
key in Idle
mode.
Missed Calls
(Menu 3.1)
This menu lets you view the last 20 numbers of the
calls you received, but did not answer.
The number and name, if available, display
together with the date and time when the call was
received.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number, if available, and dial it or save it
in Phonebook.
You can also dial the number by pressing the
key.
86
87
X105.book Pages 88 - 89 Saturday, February 7, 2004 9:34 AM
Call Records
Call Records
Received Calls
(Menu 3.2)
This menu lets you view the last 20 numbers of the
calls you received.
The number and name, if available, display
together with the date and time when the call was
received.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number, if available, and dial it or save it
in Phonebook.
You can also dial the number by pressing the
key.
Dialled Calls
Delete All
(Menu 3.4)
This menu allows you to delete all of the records in
each call record. You can also delete all of your call
records at one time.
To
Press the
select a call record to
clear
Up or Down key. To delete
all of your call records,
select All Calls.
place a check mark
Mark soft key.
remove the check
mark
Unmark soft key.
delete the marked
records
Delete soft key.
(Menu 3.3)
This menu lets you view the last 20 numbers you
dialed.
When a confirming message displays, press the Yes
soft key to confirm.
The number and name, if available, display
together with the date and time when the call was
made.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number and dial it or save it in
Phonebook.
You can also dial the number by pressing the
key.
88
89
X105.book Pages 90 - 91 Saturday, February 7, 2004 9:34 AM
Call Records
Call Time
Call Records
(Menu 3.5)
This menu lets you view the timers for calls you
made and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following options are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls you made since
the timer was last reset.
Total Received: total length of all calls you
received since the timer was last reset.
Reset Timers: option used to reset the call timers.
You must first enter the phone password and then
press the OK soft key.
Note: The password is preset to “00000000.” To
change this password, see page 102.
Call Cost
(Menu 3.6)
This network feature lets you view the cost of calls.
This menu may not be shown depending on your
SIM card.
The following options are available:
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set Max Cost option,
you can no longer make any calls until you reset the
counter.
Max Cost: maximum cost set in the Set Max Cost
option. See below.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 177) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 177) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 177) and then press the OK soft key.
90
91
X105.book Pages 92 - 93 Saturday, February 7, 2004 9:34 AM
Sound Settings
Sound Settings
Alert Type
You can use the Sound Settings feature to
customize various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message or switch your phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in Silent mode (see
page 28), you cannot change the sound
settings.
(Menu 4.3)
This option allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu (Menu 4.1); see
page 92.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Ring Tone
(Menu 4.1)
This option allows you to select a ring melody.
Keypad Tone
You can choose between many different melodies.
If you have downloaded sounds from the Internet,
you can use them in this menu.
This option allows you to select the tone that the
phone sounds when you press a key.
(Menu 4.4)
You can select an option from Cool, Piano, Tone
and Beep. To turn the sound off, select Off.
Ring Volume
(Menu 4.2)
This option allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
92
93
X105.book Pages 94 - 95 Saturday, February 7, 2004 9:34 AM
Sound Settings
Message Tone
Sound Settings
(Menu 4.5)
Power On/Off
(Menu 4.6)
This option allows you to select how the phone
informs you that a new message has been received.
This option allows you to select the melody that the
phone sounds when it is switched on and off.
SMS Tone (Menu 4.5.1)
You can choose either Classical or Cheerful. To
turn the sound off, select Off.
The following options are available for alerting you
to new SMS messages:
Extra Tones
(Menu 4.7)
Off: the phone does not use the SMS tone.
Light Only: the service light flashes.
You can customize additional tones used for the
phone.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
To turn a given
tone
Press the
SMS Tonex: the phone uses one of several SMS
tones.
on
Mark soft key.
A check mark displays in
front of the option.
off
Unmark soft key again.
The check mark no longer
displays.
SMS-CB Tone (Menu 4.5.2)
The following options are available for alerting you
to new cell broadcast messages:
Off: the phone does not use the CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tonex: the phone uses one of several CB
tones.
The following options are available:
Error Tone: sets whether or not the phone informs
you when you make a mistake.
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: sets your phone to beep when your
call is connected to the system.
94
95
X105.book Pages 96 - 97 Saturday, February 7, 2004 9:34 AM
Phone Settings
Phone Settings
Many different features of your phone can be
customized to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Text Display: you can specify whether or not the
phone displays the text, such as the date and time.
Text Color: you can select the color of the text to
be displayed on the idle screen.
Menu Style (Menu 5.1.2)
Display Settings
(Menu 5.1)
In this menu, you can change the settings for the
display or backlight.
Wallpaper (Menu 5.1.1)
This menu option allows you to change the
background image or the color of the text to be
displayed in Idle mode.
The following options are available:
Wallpaper List: you can select a background
image to be displayed on the idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or
Down key.
You have various preset images available. You
can also select the blank background or any
images downloaded from the Internet or
received in messages.
2. Press the Select soft key when the image you
want highlights.
This menu option allows you to select the menu
display style. You can choose either Bar Style or
Page Style.
Auto Key Lock (Menu 5.1.3)
This menu option allows you to set the phone to
automatically lock the keys if no keys are pressed
within a given period of time. This feature is useful
to avoid pressing keys by mistake.
To use this feature, select the length of time the
phone waits before it locks the keypad.
If you do not want to use this feature, select Off.
Note: You can manually lock the keypad. For further
details, see page 22.
Brightness (Menu 5.1.4)
This menu option allows you to adjust the
brightness of the display screen to see it better in
different lighting conditions.
Adjust the brightness by using the Up or Down keys
or the Volume keys on the left side of the phone.
3. When the image displays, press the Select soft
key to display it on the idle screen.
96
97
X105.book Pages 98 - 99 Saturday, February 7, 2004 9:34 AM
Phone Settings
Phone Settings
Back Light (Menu 5.1.5)
Graphic Logo (Menu 5.1.8)
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
This menu allows you to display your service
provider’s logo instead of its name.
Select the length of time the backlight is on. The
backlight turns on when you press a key or receive
a call or message and remains for the specified
length of time. The display switches off after one
minute.
Off: the service provider’s name displays in Idle
mode.
On: the service provider’s logo stored in your
phone displays in Idle mode; if no logo has been
stored, the service provider’s name displays.
If you do not want to use the backlight, select Off.
Greeting Message
(Menu 5.2)
Auto Light (Menu 5.1.6)
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
you to conserve your battery power.
The following options are available:
Disable: the backlight is used according to the
setting in the Back Light menu (Menu 5.1.5); see
page 98.
Enable: the backlight is used only during the
specified period of time. Set the time when the
phone turns the light on and then turns it off, using
the appropriate number keys.
Service Light (Menu 5.1.7)
This menu option allows you to set a greeting to be
displayed briefly when the phone is switched on.
To
Press the
clear the existing
message
key and hold it down
until the message is cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
right soft key.
For further details about how to enter characters,
see page 42.
This menu option allows you to select whether or
not the service light is used or in which color it
flashes.
Select one from the three color settings available.
When the phone is ready for use, the service light
flashes in the appropriate color.
If you do not wish to use the service light,
select Off.
98
99
X105.book Pages 100 - 101 Saturday, February 7, 2004 9:34 AM
Phone Settings
Phone Settings
Own Number
(Menu 5.3)
This function is a memory aid, which you can:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Language
(Menu 5.4)
You can select a display language, either English or
Español.
PIN Check (Menu 5.5.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN (Menu 5.5.2)
Security
(Menu 5.5)
The Security feature enables you to restrict the use
of your phone to the people and the types of calls of
your choice.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. See also pages 141-143.
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock (Menu 5.5.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu (Menu 5.5.4).
100
101
X105.book Pages 102 - 103 Saturday, February 7, 2004 9:34 AM
Phone Settings
Phone Settings
Once the correct password has been entered, you
can use the phone until you switch it off.
FDN Mode (Menu 5.5.6)
The following options are available:
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password (Menu 5.5.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option does not display.
Change PIN2 (Menu 5.5.7)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
SIM Lock (Menu 5.5.5)
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option does not display.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
102
103
X105.book Pages 104 - 105 Saturday, February 7, 2004 9:34 AM
Phone Settings
Extra Settings
Phone Settings
(Menu 5.6)
You can turn the automatic redialing or answering
features on or off.
To turn a feature
Press the
on
On soft key.
A check mark displays in
front of the option.
off
Off soft key.
The check mark no longer
displays.
Short Cut
(Menu 5.7)
The Navigation keys can be used as shortcut keys.
In Idle mode, they allow you to access specific
menu options directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the Up or Down key, and press the
Select soft key.
• Key Up
• Key Down
• Key Right
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two call attempts varies.
• Key Left
2. Select the menu option to be assigned to the
key by pressing the Up or Down key.
Note: To deactivate a shortcut key, select the
None option.
Anykey Answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key and the Reject soft key. To
reject the call, press the
key or the Reject
soft key.
3. Press the Select soft key to save the selection.
When this option is unchecked, you can only press
the
key or Accept soft key.
You can easily reset your phone to its default
settings. To reset your phone:
Reset Settings
(Menu 5.8)
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to “00000000.” To
change this password, see page 102.
104
105
X105.book Pages 106 - 107 Saturday, February 7, 2004 9:34 AM
Organizer
Organizer
The Organizer feature enables you to:
•
•
•
•
view the calendar and organize your schedule.
define a list of things to do.
set the current date and time.
set an alarm so that the phone rings at a specific
time, such as to remind you of an appointment.
• record voice memos.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
Alarm
(Menu 6.1)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable).
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up in
the morning.
To set an alarm:
1. Choose the type of alarm to be set and press the
Select soft key.
106
2. Enter the time for the alarm to sound and press
the OK soft key.
Note: The time format is preset to 12 Hours
by default. You can change it in the Time
Format menu (Menu 6.3.4).
If you want to use the alarm options, press the
Options soft key. The following options are
available:
• Remove Alarm: deactivates the current
alarm.
• Alarm Sound Set: allows you to select the
alarm melody.
3. If you use the 12-hour time format, select AM
or PM and press the OK soft key.
4. If you select Morning Call in step 1, choose the
repeat option, Monday to Friday or Monday
to Saturday, and press the Select soft key.
To stop the alarm when it rings, press the Exit soft
key.
Remove Alarm: deactivates all alarm settings.
Note: You can also stop the alarm even if your phone
is in Key Lock mode. After you check the alarm,
Key Lock mode is canceled.
Autopower: when this option is set to Enable, the
alarm rings at the specified time, even if the phone
is switched off.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm does
not ring.
107
X105.book Pages 108 - 109 Saturday, February 7, 2004 9:34 AM
Organizer
Calendar
Organizer
(Menu 6.2)
With the Calendar feature, you can:
• consult the calendar.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
Consulting the Calendar
2. Press the Select soft key.
An empty memo screen displays to allow you to
enter your memo.
3. Enter your memo and then press the OK soft
key.
Note: For further details about how to enter
characters, see page 42.
You are asked if you wish to set an alarm.
When you select the Calendar menu (Menu 6.2),
the calendar displays with today’s date highlighted.
The following options are available when you press
the Options soft key:
4. If you want an alarm to ring on the chosen day,
press the Yes soft key.
Search All: displays all of the memos, starting with
the oldest, regardless of the day. To scroll through
the memos, press the Up or Down key.
5. If you pressed the Yes soft key, set the time for
the alarm and press the OK soft key.
Delete All: allows you to delete all of the memos.
You are asked to confirm your action.
Go to Date: allows you to go to a specific date.
Exit: exits the Calendar feature and returns to Idle
mode.
Writing a Memo
Otherwise, press the No soft key.
Note: The time format is preset to 12 Hours by
default. You can change it in the Time
Format menu (Menu 6.3.4).
You can also select the melody for the alarm by
pressing the Melody soft key.
6. If you use the 12-hour time format, select AM
or PM and press the OK soft key.
The color of the date on the calendar changes to
green to indicate that a memo exists for that date.
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
Navigation keys.
Note: To skip to the previous or next month,
press the Volume keys on the left side of
the phone.
Viewing a Memo
When you select a day for which a memo already
exists on the calendar, the latest memo of the day
displays.
If more than one memo is stored, press the Up or
Down key to scroll to the previous or next memo.
108
109
X105.book Pages 110 - 111 Saturday, February 7, 2004 9:34 AM
Organizer
Organizer
Press the New soft key to add a new memo to the
day.
The screen shows the:
You can use the following options by pressing the
Option soft key:
• current date and time.
Edit: allows you to change the memo text.
Alarm: allows you to set an alarm to ring at the
specified time to remind you of the memo. If you
already set, you can change or delete the alarm.
Delete: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date of the
memo.
Time & Date
• time difference between the selected city and
your city if you have set the local time (see below
for further details).
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times. The local date and time display.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
(Menu 6.3)
This menu allows you to change the current time
and date displayed. You can also find out what time
it is in another part of the world.
The following options are available:
Set Time: allows you to enter the current time. You
can choose the time format in the Time Format
menu (Menu 6.3.4). See below.
Note: Before setting the time, you must specify your
time zone, in the World Time menu (Menu
6.3.3).
Set Date: allows you to enter the day, month and
year.
World Time: allows you to find out what time it is
in another part of the world, using the Left and
Right keys.
110
• city name.
Calculator
(Menu 6.4)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions; addition, subtraction,
multiplication and division.
1. Enter the first number using the numeric keys.
Notes:
• To delete mistakes or clear the display, press the
key.
• To include a decimal point or a bracket, press the
left soft key until the symbol you want displays.
2. Press the right soft key until the arithmetic
symbol you want appears; + (addition),
- (subtraction),
(multiplication), / (division).
111
X105.book Pages 112 - 113 Saturday, February 7, 2004 9:34 AM
Organizer
Organizer
3. Enter the second number.
4. To view the result, press the
Action
key.
5. Repeat steps 2 to 4 as many times as required.
To Do List
(Menu 6.5)
This feature allows you to:
Change the status
of a specific task
➀ Highlight the task.
➁ Press the
key to mark
the task as completed as of
the current date and time.
or
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Mark option.
➃ Select the appropriate
status (Done or Undo).
Create a new
task
➀ Press the Options soft key.
➁ Select the New option.
➂ Enter the text, priority and/
or deadline for the task.
Edit an existing
task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Edit option.
➃ Change the text, priority
and/or deadline for the
task.
Sort the existing
tasks by priority
or status
➀ Press the Options soft key.
➁ Select the Sort option.
➂ Select the sort criterion
(High, Low, Done or
Undo).
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: For further details about how to enter
characters, see page 42.
3. Press the OK soft key.
4. Select high, normal or low priority using the Up
and Down keys and press the Select soft key.
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the
Skip soft key.
Editing the To Do List
Procedure
View the details for ➀ Highlight the task.
a specific task
➁ Press the View soft key.
➂ Scroll through the tasks
using the Up and Down
keys, if necessary.
When you select the To Do List menu (Menu 6.5),
the current contents display with the status mark, if
the task has been done, and priority;
for High,
for Normal and
for Low.
112
113
X105.book Pages 114 - 115 Saturday, February 7, 2004 9:34 AM
Organizer
Organizer
Voice Memo
(Menu 6.6)
Action
Procedure (continued)
Copy a task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Copy option.
➃ Change the text, priority
and/or deadline for the
task.
You can record voice memos. After recording, you
can send a memo to other people using the
Multimedia Message Service.
Copy a task to
the calendar
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Copy to
Calendar option.
➃ Change the text and/or
deadline for the task and
set the alarm.
This menu allows you to record a new memo. When
you select this menu, the display shows the 30second timer.
Delete a task
Delete all tasks
Exit the To Do
list
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Delete option.
➀ Press the Options soft key.
➁ Select the Delete All
option.
➂ Confirm the deletion by
pressing the OK soft key.
➀ Press the Options soft key.
➁ Select the Exit option.
Record (Menu 6.6.1)
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the Stop soft key or the
recording time expires, the following options
display:
• Replay: plays back your memo.
• Re-record: discards the memo and enables
you to record another one.
• Save: allows you to save the memo.
• Quit: cancels your recording and exits the
Record menu.
4. To save the memo, choose Save from the
options and press the Select soft key.
5. Press the C key to clear the default name, if
necessary, and enter a name for the memo.
For further details about how to enter
characters, see page 42.
114
115
X105.book Pages 116 - 117 Saturday, February 7, 2004 9:34 AM
Organizer
Organizer
6. Press the OK soft key.
Delete All (Menu 6.6.3)
The memo is saved and then the display shows
the memo information.
7. Press the Options soft key to use the following
memo options:
• Send: allows you to send the memo to other
people by using the MMS feature. Follow the
procedure on page 78.
• Rename: allows you to change the memo’s
name.
• Delete: deletes the memo.
8. To exit, press the C or
key.
Memo List (Menu 6.6.2)
This menu shows your voice memo list. Scroll to a
memo and press the Options soft key. The
following options are available:
Play: plays the memo.
Send: allows you to send the memo to other people
by using the MMS feature. See page 78 for further
details about sending a message.
In this menu, you can delete all of your voice
memos.
When the confirming message appears, press the
Yes soft key. To cancel the deletion, press the No
soft key.
Currency Exchange
(Menu 6.7)
Using this menu option, you can figure currency
conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount to convert and press the OK
soft key.
The amount you entered and its equivalent
value display.
3. Press the Exit soft key to exit the currency
convertor.
Rename: allows you to change the memo’s name.
Information: displays information about the
memo, such as the name, date when the memo
was made, recording duration and memory size.
Delete: deletes the memo.
116
117
X105.book Pages 118 - 119 Saturday, February 7, 2004 9:34 AM
Network Services
Network Services
To set your call diverting options:
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call Diverting
(Menu 7.1)
1. Select a call diverting option by pressing the Up
or Down key, and then press the Select soft
key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Select soft key.
This network service enables incoming calls to be
rerouted to a number that you specify.
Example: You may wish to forward your business
calls to a colleague while you are on
holiday.
The current status displays. If the option has
already been set, the number to which the calls
are forwarded displays.
To
Press the
You can use the following options to divert voice
calls and/or data calls:
activate call
forwarding
Activate soft key. Go to
step 4.
Divert Always: all calls are forwarded.
change the call
number
Change soft key. Go to
step 4.
deactivate call
forwarding
Remove soft key.
Busy: calls are forwarded when you are already on
another call.
No Reply: calls are forwarded when you do not
answer the phone.
Unreachable: calls are forwarded when you are
not in an area covered by your service provider.
Cancel All: all call forwarding options are canceled.
3.
4. Enter the number to which the calls are to be
forwarded and press the OK soft key.
To enter an international code, press the 0 key
until the + sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call forwarding settings by
selecting the Cancel All option.
118
119
X105.book Pages 120 - 121 Saturday, February 7, 2004 9:34 AM
Network Services
Call Barring
Network Services
(Menu 7.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside of your
home service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual barring options for each
of the following call types:
• Voice calls only
• Data calls only
To set your call barring options:
1. Select the type of call barring by pressing the Up
or Down key, and then press the Select soft
key.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
2. Select the type of calls to be barred by pressing
the Up or Down key, and then press the Select
soft key.
120
121
X105.book Pages 122 - 123 Saturday, February 7, 2004 9:34 AM
Network Services
Call Waiting
Network Services
(Menu 7.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which
you want to apply the call waiting option by
pressing the Up or Down key, and then press the
Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Network Selection
(Menu 7.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note: You can select a network other than your home
network only if there is a valid roaming
agreement between them.
To indicate to automatically or manually select the
network when roaming:
1. When Network Selection displays, press the
Select soft key.
2. Press the Up or Down key until the appropriate
option highlights, and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 3.
3. Press the Up or Down key until the network you
want highlights, and then press the OK soft key.
You are connected to that network.
122
123
X105.book Pages 124 - 125 Saturday, February 7, 2004 9:34 AM
Network Services
Caller ID
Network Services
(Menu 7.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a group.
To
Press the
scroll through the
existing CUG
indexes
Up or Down key.
The following options are available:
Default: the default setting provided by the
network is used.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Note: Some networks do not allow the user to change
this setting.
Hide Number: your number does not display on
the other person’s phone.
Send Number: your number is sent each time you
make a call.
Closed User Group (CUG)
(Menu 7.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details about how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key:
124
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User
Group. This feature depends on the nature of your
CUG subscription. Please check with your service
provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
125
X105.book Pages 126 - 127 Saturday, February 7, 2004 9:34 AM
Funbox
Funbox
Navigating the WAP Browser
The Funbox menu contains several fun options.
WAP Browser
(Menu 8.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigation the Wireless Web using your phone.
Home (Menu 8.1.1)
Selecting this option connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
key in Idle mode.
To
Press the
scroll through and
select browser
items
Up or Down key until the
symbol
points to the
required item, and then press
the OK soft key to confirm the
selection.
select a numbered
item
corresponding numeric key.
return to the
previous page
Back soft key or the
key.
return to the
startup homepage
key for more than two
seconds and select the Home
option. For further details
about this option, see
page 128.
The content of the WAP Browser startup home page
depends on your Wireless Web service provider. To
scroll through the screen, use the Up and Down
keys.
Entering Text in the WAP Browser
Note: To access the startup home page from any
other screen in the WAP browser, use the
Home option. For further details about the
WAP Browser menus, see page 128.
When you are prompted to enter text, the current
text input mode is indicated on the screen. You can
change the text input mode by pressing the
key.
The following modes are available:
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
Upper-case character (A): allows you to enter
upper-case English characters.
Lower-case character (a): allows you to enter
lower-case English characters.
T9 (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can
use only the 0 key to display alternative words. To
change the case, press the
key.
Number (1): allows you to enter numbers.
126
127
X105.book Pages 128 - 129 Saturday, February 7, 2004 9:34 AM
Funbox
Funbox
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option:
1. Press and hold the
A menu displays.
key.
2. Highlight a menu option by pressing the Up or
Down key.
3. Select an option by pressing the Select soft key.
4. If necessary, select a secondary option using the
Up and Down keys, and press the Select soft
key to confirm.
To
Press the
set the current
page as your
startup home page
Option soft key, select the
Save to Home option and
press the Select soft key.
set a bookmark for
the current page
Option soft key, select the
Save to Bookmark option
and press the Select soft
key.
cancel your setting
Back soft key.
Edit Home: allows you to change the startup home
page manually. Enter the required URL and press
the OK soft key. For further details about entering
text, see page 42.
Note: The menus may vary, depending on your
version of the WAP browser.
Clear Cache: deletes the information stored in the
cache, which stores the most recently accessed Web
pages.
The following menu options are available:
Inbox: allows you to read messages received from
the web server.
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Favorite (Menu 8.1.2)
Go to URL: allows you to manually enter the URL
address of the required Web page. After entering an
address, press the OK soft key to go there directly.
This option allows you to store the URL addresses of
your favorite web sites. You can access this menu
directly by pressing and holding the
key while
using the WAP browser.
Show URL: displays the URL address of the site to
which you are currently connected. It also enables
you to set the current site as the startup home
page.
To store a URL address:
1. Select an empty location and press the Options
soft key.
2. Enter the address and press the Enter soft key.
3. Enter a name for the favorite item and press the
Enter soft key.
128
129
X105.book Pages 130 - 131 Saturday, February 7, 2004 9:34 AM
Funbox
After saving favorite items, you can use the
following options by pressing the Options soft key:
Goto URL: takes you to the site.
Edit: allows you to edit the address.
Delete: deletes the address.
http:// (Menu 8.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access.
For further details about how to enter characters,
see page 42.
Funbox
When the bearer is set to GPRS:
IP Address: enter the WAP gateway address
required to connect to the Internet.
User Name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP Address: enter the WAP gateway address
required to connect to the Internet.
Settings (Menu 8.1.4)
Login Name: enter the PPP server login ID.
This menu allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about your Settings options.
Password: enter the PPP server password.
For each server, the following options are available:
Data Call Type: select a data call type; Analogue
or ISDN.
Profile Name: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the C key and enter your
own choice.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data.
130
Dial-up Number: enter the PPP server phone
number.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear Cache (Menu 8.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
131
X105.book Pages 132 - 133 Saturday, February 7, 2004 9:34 AM
Funbox
Funbox
Push Message (Menu 8.1.6)
In this menu option, you can receive and access
web messages from the server.
2. On the startup screen of the MIDlet, scroll to an
option using the Navigation keys.
The following options are available:
The following options are available:
• START GAME: starts a new game.
Inbox: allows you to read the messages received
from the web server.
• CONTINUE: allows you to continue the last
game you were playing.
Receive: allows you to set whether or not your
phone receives web messages.
• HIGH SCORE: shows the high score table.
This option may not be available for some
games.
Delete All: allows you to delete all of the web
messages.
Games
(Menu 8.2)
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
When you access the Games menu, the list of the
default games appears. Once you have downloaded
games, they are added to the list.
Note: Java services may not be available, depending
upon your service provider.
• HOW TO PLAY: shows how to play the game
and the key functions for the game.
• OPTION: allows you to switch the game
sound on or off.
3. Press the
key to confirm your selection.
While you are playing
a game, to
Press the
adjust the sound volume
Volume keys.
stop the game and return
to the startup screen
C key.
exit the game
key.
Viewing MIDlet Information
Launching a MIDlet
Note: The procedure explained below is for the
default games. For downloaded games, the
procedure may be different.
1. Scroll to the MIDlet you want on the Games list
and press the Launch soft key.
1. Scroll to the MIDlet you want and press the Info
soft key.
The display shows information about the MIDlet,
such as the file size, application version and its
vendor.
2. To scroll to other MIDlet information, press
the Navigation keys.
132
133
X105.book Pages 134 - 135 Saturday, February 7, 2004 9:34 AM
Funbox
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Yes soft key
to confirm the deletion.
4. To exit and return to the Games screen, press
the Back soft key or the C key.
Funbox
Changing the DNS Settings
The DNS (Domain Name Server) is the server that
assigns the Java server domain name to an IP
address. The DNS setting is preset at the factory,
but sometimes you may need to change it at your
service provider’s instructions.
Note: When you select the default games from the
list, the Delete option is not available, so that
you cannot delete them.
1. Scroll to Setting on the Games list and press
the Select soft key.
Entering Text
2. Enter the primary address using the number
keypad and press the OK soft key.
If you need to enter text while using a MIDlet, you
can use the following input modes:
3. Enter the secondary address and press the OK
soft key.
Upper-case character (A): allows you to enter
upper-case English characters.
Lower-case character (a): allows you to enter
lower-case English characters.
Number (1): allows you to enter numbers.
Symbol: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation
keys, press the
key to insert it.
T9 (T9): allows you to enter English characters by
pressing one key per letter. In this mode, you can
change the case by pressing the 0 key.
To change the text input mode, press the
key
until the appropriate indicator appears on the soft
key area of the display.
Sounds
(Menu 8.3)
In this menu, you can view the list of sounds
downloaded from the web server or received in
multimedia messages. You can set the downloaded
sounds as the current ring tone or send them to
other phones.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring
tone.
134
135
X105.book Pages 136 - 137 Saturday, February 7, 2004 9:34 AM
Funbox
Images
Funbox
Memory Status
(Menu 8.4)
In this menu, you can view the list of pictures
downloaded from the web server or received in
messages. You can set the downloaded pictures as
the current background image or send them to
other phones.
By pressing the Options soft key, you can use the
following options:
Rename: allows you to change the name of the
image.
Delete: deletes the image.
(Menu 8.6)
You can check the amount of the memory being
used and the memory remaining for games, sounds
and images.
Games: each time you press the Next soft key, the
display shows the total, free and used space, and
the number of objects you downloaded.
Sounds & Images: each time you press the Next
soft key, the display shows the total and free space,
including the memory for objects in the Sounds
and Images menus and the memory for voice
memos.
Set as Wallpaper: sets the image as your
wallpaper for the idle screen.
Delete All
(Menu 8.5)
This menu allows you to delete all of the
downloaded items in the Games, Sounds and
Images folders. You can delete all of the items at
one time.
To
Press the
select a folder to
clear
Up or Down key. To delete
all of your items, select
All.
place a check mark
Mark soft key.
remove a check mark Unmark soft key.
delete the marked
items
Delete soft key.
When a confirming message displays, press the Yes
soft key to confirm.
136
137
X105.book Pages 138 - 139 Saturday, February 7, 2004 9:34 AM
Solving Problems
Solving Problems
If you are experiencing problems with your phone,
perform the following simple checks before
contacting a service professional. This may save
you the time and expense of an unnecessary
service call.
When you switch your phone on, the
following messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN Check menu
(Menu 5.5.1).
Enter PUK
“No service,” “Network failure” or “Not
done” displays
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialed
• Have you pressed the
key?
• Are you accessing the right cellular network?
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your service provider.
138
139
X105.book Pages 140 - 141 Saturday, February 7, 2004 9:34 AM
Solving Problems
Access Codes
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• The battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialed when you recall a
Phonebook entry
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorized use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
key one or more times until
the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
(Menu 5.5). See page 100 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 911, so
that you do not dial an emergency
number accidentally.
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung aftersales service.
140
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
page 101
(Menu 5.5.3).
change the phone
password
page 101
(Menu 5.5.4).
141
X105.book Pages 142 - 143 Saturday, February 7, 2004 9:34 AM
Access Codes
Access Codes
PIN
PIN2
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorized use. It is usually supplied with the
SIM card.
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
See
activate/deactivate the
PIN Check feature
page 101
(Menu 5.5.1).
change the PIN
page 101
(Menu 5.5.2).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK
soft key.
3. When the Confirm New PIN message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
142
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 103 (Menu 5.5.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
143
X105.book Pages 144 - 145 Saturday, February 7, 2004 9:34 AM
Glossary
Glossary
Dual Band
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Ability to operate with both DCS (1900 MHz) and
GSM (850 MHz) networks. The phone automatically
uses the network with the strongest signal and
even switches networks during a call within the
same operator’s network.
Active Flip
Ability to answer a call simply by opening the
phone.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
144
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
service provider’s logo, as well as combinations of
simple media to and from EMS-compliant handsets.
Because EMS is based on SMS, it can use SMS
centers the same way that SMS does. EMS works
on all Global System for Mobile communications
(GSM) networks. EMS senders can use text,
melodies, pictures, sounds, and animations to
enhance the expressive power of messages that are
limited by the display constraints of mobile devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
145
X105.book Pages 146 - 147 Saturday, February 7, 2004 9:34 AM
Glossary
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
Glossary
Multi-party Calling
Ability to establish a conference call involving up to
five additional people.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorized use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
MMS (Multimedia Message Service)
Proxy Server
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
A proxy server resides between a web client, such
as a web browser, and a real Web server and acts
as an intermediary between them. When some
people browse a web site, their browser is not
actually connecting to the web server. The request
from their browser goes to a proxy server, and the
proxy server makes the request to the web server.
146
A proxy server can improve performance for groups
of users because it cache the results of all requests
for a certain amount of time. If a user requests a
web page that it already loaded for another user, it
reloads the page instead of forwarding the request
to the Web server, which can be a time-consuming
operation.
147
X105.book Pages 148 - 149 Saturday, February 7, 2004 9:34 AM
Glossary
Glossary
PUK (PIN Unblocking Key)
Soft Keys
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Two keys marked
purpose of which:
Roaming
• is indicated on the bottom line of the display just
above the corresponding key.
Use of your phone when you are outside your home
area (when traveling for example).
SDN (Service Dialing Numbers)
Telephone numbers supplied by your service
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
and
on the phone, the
• varies according to the function that you are
currently using.
Voice Mail
Computerized answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
148
149
X105.book Pages 150 - 151 Saturday, February 7, 2004 9:34 AM
Index
Index
E
A
Access codes • 141
Alarm • 106
Alert type • 93
Alphabet mode, text input •
46
Answering
call • 25
second call • 52
Anykey answer • 104
Auto redial • 104
B
Background image • 96
Backlight
auto light • 98
description • 15
time, set • 98
Barring, calls • 120
Battery
charging • 19
installing • 18
low indicator • 20
precautions • 147
removing • 17
Broadcast messages • 72
Browser, WAP • 126
C
Calculator • 111
Calendar memos
copying • 110
deleting • 110
viewing • 109
writing • 108
Call back, message • 63
Call cost • 91
Call records
dialled • 88
missed • 26
received • 88
Call time • 90
Caller groups
editing • 37
150
searching • 36
Caller ID • 124
Calls
answering • 25, 52
barring • 120
diverting • 118
ending • 24
holding • 49
making • 23
redialing • 24
rejecting • 25
waiting • 52, 122
CB (Cell Broadcast)
messages • 72
Characters, enter • 42
Charging battery • 19
Closed User Group• 124
Conference call • 53
Connect tone • 95
Cost, calls • 91
Currency exchange • 115
D
Date, set • 110
Deleting
calendar memo • 108
call record • 89
phonebook • 34
picture message • 75,
76
task • 114
text message • 63, 64
voice memo • 116
Delivery reports, message •
69, 84
Dialed calls • 88
Display
backlight • 15
icons • 14
layout • 13
settings • 96
Diverting, calls • 118
DNS settings • 135
Earpiece volume • 25
Emergency calls • 154
EMS (Enhanced Message
Service) • 62
Error tone • 95
F
FDN (Fixed Dial Number)
mode • 103
Forwarding, picture message
• 76
Funbox • 126
G
Games • 132
Greeting message • 99
H
Health and safety • 144
Holding, call • 49
I
Icons, description • 14
Images, downloaded • 136
Inbox, messages
picture • 74
text • 62
International calls • 23
Internet • 126
J
Java service • 132
K
Key volume • 25
Keypad tones
selecting • 93
sending • 51
Keys
description • 11
location • 10
shortcut • 105
L
Language, select • 100
Last number, redial • 24
Locking, phone • 101
Low battery indicator • 20
M
Memory status
downloaded items • 137
phonebook • 41
picture messages • 83
text messages • 70
Menu style • 97
Menus
accessing • 55
list • 57
Message tone • 94
Messages
cell broadcast • 72
greeting 99
multimedia • 74
picture • 74
text • 62
voice • 71
web • 132
MIDlets • 132
Minute minder • 95
Missed calls • 26, 87
MMS (Multimedia Messages
Service) • 74
MMS profile • 85
Morning call • 106
Multimedia messages
setting • 84
Multi-party calls • 53
Muting
all sounds • 50
key tones • 51
microphone • 50
151
X105.book Pages 152 - 153 Saturday, February 7, 2004 9:34 AM
Index
N
Names
entering • 42
searching/dialing • 35
Network selection • 123
Network services • 118
Numbers, phone
searching/dialing • 35
storing • 31
O
On/off switch, phone • 21
Organizer • 106
Outbox, messages
picture • 77
text • 64
Own number • 100
P
Password
call barring • 121
Password, phone • 102, 141
Phone
care and maintenance •
156
display • 13
icons • 14
keys • 11
layout • 10
locking • 101
password • 141
resetting • 105
switching on/off • 21
unpacking • 9
Phonebook
copying • 34
deleting • 34, 40
editing • 34
options • 34
pasting • 34
searching/dialing • 35
speed-dialing • 38
storing • 31
152
Index
Picture messages
creating/sending • 78
deleting • 76, 80
editing • 77
reading • 74
setting • 79
PIN
changing • 101
description • 142
PIN2
changing • 103
description • 143
Power on/off tone • 95
Problems, solving • 138
PUK • 142
PUK2 • 143
Shortcut, menu • 105
Silent mode • 29
SIM card
installing • 17
locking • 103
SMS (Short Message Service)
Inbox • 62
Outbox • 64
Soft keys • 29
Sound settings • 92
Sounds, downloaded • 135
Speed-dialing • 38
Switching on/off
microphone • 50
phone • 21
Symbol mode, text input • 48
R
T
Radio-frequency • 144
Received calls • 88
Received messages
picture • 74
text • 62
Redialing
automatically • 104
manually • 24
Resetting phone • 105
Ring tone • 92
Alert type • 93
Ring volume • 92
Road safety • 148
Roaming • 123
T9 mode, text input • 44
Tasks, to do list
creating • 112
editing • 112
Templates
text • 68
Templates, message
picture • 82
text • 68
Text input mode • 43
Text message
creating/sending • 65
deleting • 63, 64
reading • 62, 64
setting • 68
Time, set • 110
To do list • 112
Tone
connect • 95
error • 95
keypad • 93
message • 94
minute minder • 95
power on/off • 95
ring • 92
Travel adapter • 19
S
Safety
information • 144
precautions • 7
Scheduler • 108
Searching, phonebook • 35
Security, calls • 100
Sent messages
picture • 77
text • 64
Service light • 16, 98
U
User group • 124
V
Vibration • 28, 93
Voice mail • 71
Voice memos
deleting • 116
playing • 116
recording • 115
Voicemail server • 71
Volume, adjust
earpiece • 25
keypad tone • 25
ring • 92
W
Waiting call • 52, 122
Wallpaper • 96
WAP browser
accessing • 126
cache, clear • 131
favorites • 129
setting • 130
World time • 110
Writing messages
picture • 78
text • 65
153
X105.book Page 154 Saturday, February 7, 2004 9:34 AM
Index
154
➄ Press the Select soft key.
View Missed
Calls
Immediately
after Missing
Them
End a Call
➂ Press the Select soft key.
➃ Scroll using the Up and Down
keys through the list of the
options until the one you want
is selected.
Make a Call
Switch On/
Off
➁ Scroll using the Up and Down
keys through the list of the
menus until you reach the menu
you want.
➀ Press the Menu soft key.
Each of the two soft keys ( and
) perform
the function indicated by the text above it, on
the bottom line of the display.
Access
the Menu
Functions
key.
key.
➀ Press the View soft key.
➁ Scroll using the Up and Down
keys through the missed calls.
➂ To return the call, press the
key.
Briefly press the
➀ Enter the number.
key.
➁ Press the
Press and hold the
Quick Reference Card
Dual Band SGH-X105 GPRS Telephone
X105.book Page 155 Saturday, February 7, 2004 9:34 AM
155
X105.book Page 156 Saturday, February 7, 2004 9:34 AM
Adjust the
Volume
Answer a
Call
➀ Select the Alert Type
menu (Menu 4.3).
Press the Volume keys on
the left side of the phone.
Press the
key.
Choose the
Alert Type
➁ Select an option:
• Light Only
• Melody
• Vibration
• Vibra+Melody
➂ Press the Select soft
key.
Search for a
Number in
Phonebook
Store
Numbers in
Phonebook
➀ Press the Name soft key.
➁ Select the Search option.
➂ Enter the first few letters of the
name.
➃ To scroll through the names, press
the Up and Down keys.
➄ Press the View soft key.
➅ To scroll through the numbers,
press the Up and Down keys.
key to dial.
➆ Press the
➀ Enter the number.
➁ Press the Save soft key.
➂ Select an icon for label.
➃ Press the Select soft key.
➄ Enter the name.
➅ Press the OK soft key.
➆ If necessary, change the location
number.
➇ Press the OK soft key.
➈ Press the
key to return to Idle
mode.
156
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement