Playing a disc (Models with navigation system)

Playing a disc (Models with navigation system)
▼
Table of Contents
▲
Main Menu
Playing a disc (Models with navigation system)
In MP3 or WMA mode
In MP3 or WMA mode
In MP3 or WMA mode
FOLDER SELECTION − To
select a different folder, press either
side of the TUNE bar to move to the
beginning of the next folder. Press
the ▲ side of the TUNE bar to skip
to the next folder, and the ▼ side to
move to the beginning of the current
folder. Press it again to skip to the
beginning of the previous folder.
FOLDER REPEAT − This feature,
when activated, replays all files on
the selected folder in the order they
are compressed. To activate folder
repeat, press and hold the RPT
button (preset 1) for 2 seconds. You
will see FOLDER REPEAT in the
display. The system continuously
replays the current folder. Press the
RPT button again to turn it off.
Selecting a different folder with the
TUNE bar also turns off folder
repeat.
FOLDER RANDOM − This
feature, when activated, plays all
files in the selected folder in random
order, rather than in the order they
are compressed. To activate folder
random, press and hold the RDM
button. You will see FOLDER
RANDOM in the display. The
system then selects and plays files
randomly. This continues until you
deactivate folder random by pressing
the RDM button again, or if you
select a different folder with the
TUNE bar.
TRACK REPEAT (FILE
REPEAT) − To continuously replay
a track (file in MP3 or WMA mode),
press and release the RPT button
(preset 1). You will see TRACK
REPEAT in the display. Press the
RPT button again to turn it off.
176
TRACK RANDOM (Random
within a disc/folder) − This
feature plays the tracks/files within
a disc in random order. To activate
track random, press and release the
RDM button (preset 2). You will see
TRACK RANDOM in the display.
Press the RDM button again to
return to normal play.
▼
Table of Contents
▲
Main Menu
Playing a disc (Models with navigation system)
Pressing either SKIP button (preset
5 or 6) also turns off scan.
In MP3 or WMA mode
FOLDER SCAN − This feature,
when activated, samples all the first
files in each folder on the disc in
order. To activate folder scan, press
and hold the SCAN button for 2
seconds. You will see FOLDER
SCAN in the display.
The system plays the first file in
each folder for about 10 seconds. If
you do nothing, the system then
plays the first file in each folder for
10 seconds each. After playing the
first file of the last folder, the system
goes to normal playing.
Pressing either SKIP button (preset
5 or 6), or selecting a different folder
with the TUNE bar, or pressing the
SCAN button, also turns off folder
scan.
Using a Track List
FOLDER ICON
TRACK/FILE ICON
Features
SCAN (TRACK/FILE SCAN) −
The scan function samples all tracks
(files in MP3 or WMA) in the order
they were recorded. To activate scan,
press and release the SCAN button.
You will see TRACK SCAN in the
display. You will get a 10 second
sampling of each track/file on the
disc. Press the SCAN button to get
out of scan mode and play the last
track/file sampled.
FOLDER NUMBER
RETURN ICON
You can also select a track/file
directly from a track list on the audio
display. Press the AUDIO button to
show the audio display, then touch
the Track List icon. The track list
menu appears on the display.
CONTINUED
177
▼
Table of Contents
▲
Main Menu
Playing a disc (Models with navigation system)
When playing a CD recorded with
text data, each track name is shown
in the audio display. With a disc
recorded in MP3 or WMA, the folder
number and the location are also
displayed.
If the disc was not recorded with text
data, only the track number is shown.
To scroll through the display, touch
the ▲ or ▼ icon on the side of the
screen. To go back to the previous
display, touch the Return icon on the
screen.
Select the desired track/file by
touching the icon on the display. The
selected icon will be highlighted in
blue. The system begins to play the
selected track/file. With a disc in
MP3 or WMA, touch the folder icon
on the upper left of the screen to
move to the parent folder. The
current folder is highlighted in blue.
To Stop Playing a Disc
To play the radio when a disc is
playing, press the AM/FM button or
touch the FM1, FM2, AM, XM1*, or
XM2* icon. If a PC card is in the
audio unit, touch the CARD icon to
play the PC card. If a CD or CDs are
loaded in the CD changer, touch the
CDC icon to play the CD changer.
Press the CD button again or touch
the CD icon to switch back to the
disc player.
If you turn the system off while a
disc is playing, either with the
power/volume knob or by turning
off the ignition switch, the disc will
stay in the drive. When you turn the
system back on, the disc will begin
playing where it left off.
* : U.S. EX-L model only
178
▼
Table of Contents
▲
Main Menu
Playing a disc (Models with navigation system)
Removing a Disc
Protecting Discs
For information on how to handle
and protect discs, see page 202 .
Features
To remove a disc from the audio unit,
fold back the screen by pressing the
OPEN button (see page 174 ). Press
the disc eject button (
) to
remove the disc. If you eject the disc,
but do not remove it from the slot,
the system will automatically reload
it after 10 seconds and put it in pause
mode. To begin playing, press the
CD button.
To return the screen to the upright
position, press the CLOSE button.
You cannot close the screen if a disc
is partially inserted into its slot.
You can also eject the disc when the
ignition switch is off.
179
Disc Player Error Message (Models with navigation system)
If you see an error message in the
display while playing a disc, find the
cause in the chart to the right. If you
cannot clear the error message, take
your vehicle to your dealer.
Error
Message
DISC ERROR
Cause
FOCUS Error
The chart on the right explains the
error messages you may see in the
display while playing a disc.
MECH ERROR
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
180
DISC
HEAT ERROR
Mechanical Error
TOC Error
High Temperature
Solution
Press the eject button, and pull out the disc.
Check if it is inserted correctly in the disc
player.
Make sure the disc is not scratched or damaged.
Press the eject button, and pull out the disc.
Check the disc for damage or deformation.
If the disc cannot be pulled out, or the error
message does not disappear after the disc is
ejected, see your dealer.
Press the eject button, and pull out the disc.
Check the disc for damage or deformation.
Will disappear when the temperature returns to
normal.
▼
Table of Contents
▲
Main Menu
▼
Table of Contents
▲
Main Menu
CD Changer (Models with navigation system)
Canadian EX-L model
U.S. EX-L model
CD ICON
CD ICON
CD CHANGER ICON
POWER/VOLUME
KNOB
JOYSTICK
OPEN
BUTTON
CD BUTTON
AUDIO
BUTTON
CD BUTTON
AUDIO
BUTTON
TUNE BAR
JOYSTICK
Features
OPEN
BUTTON
SCAN
BUTTON
CD CHANGER ICON
POWER/VOLUME
KNOB
SCAN
BUTTON
RANDOM
BUTTON
REPEAT BUTTON
SKIP+BUTTON
SKIP−BUTTON
FAST FORWARD
BUTTON
REWIND BUTTON
TUNE BAR
RANDOM
BUTTON
REPEAT BUTTON
SKIP+BUTTON
SKIP−BUTTON
FAST FORWARD
BUTTON
REWIND BUTTON
181
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising