advertisement
PT-571
HDMI over Twisted Pair Transmitter
The PT − 571 is a twisted pair transmitter for
HDMI signals. The PT
−
571 converts an
HDMI signal to a single twisted pair signal and the PT − 572 converts the twisted pair signal back to an HDMI signal.
FEATURES
Max. Data Rate - 1.65Gbps.
HDTV Compatible.
HDCP Compliant.
HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS
−
HD).
3D Pass-Through.
DGKat™ Signal Integration - Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC − DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC
−
DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC
−
DGKat723 cable.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC
−
DGKat524, BC
−
DGKat623 and BC
−
DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non
−
Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
EDID PassThru - Passes EDID/HDCP signals from source to display.
Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached.
Power Connect™ System - A single connection to the transmitter powers the receiver.
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side
− by
− side in a 1U rack space with the optional
RK
−
4PT rack adapter.
PT-571
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS:
BANDWIDTH:
1 HDMI connector.
1 RJ
−
45 connector.
Supports up to 1.65Gbps bandwidth per graphic channel.
COMPLIANCE WITH HDMI STANDARD: Supports HDMI 1.3 and HDCP.
POWER SOURCE:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
12V DC, 250mA (transmitter and receiver together).
6.2cm x 5.2cm x 2.4cm (2.4" x 2.1" x 1") W, D, H.
0.14kg (0.3lbs).
Power supply.
RK − 4PT 19” rack adapter.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project