19 DX IV
Introduction
Our Thanks, The CB Story,
and Customer Assistance
Thank you for purchasing the Cobra 19 DX IV CB Radio
Transceiver. Properly used, this Cobra product will give
you many years of reliable service.
The Citizens Band Story
Owner’s Manual
The Citizens Band lies between the shortwave broadcast and 10-meter amateur radio
bands, and was established by law in 1949. The Class D two-way communications
service was opened in 1959. (CB also includes a Class A citizens band and Class C
remote control frequencies.)
Customer Assistance
The Cobra line of quality products includes:
Customer Assistance
CB Radios
Should you encounter any problems with this product, or not understand
its many features, please refer to this owner’s manual. If you require further
assistance after reading this manual, Cobra Electronics offers the following
customer assistance services:
microTALK® Radios
For Assistance in the U.S.A.
HighGear® Accessories
Automated Help Desk English only.
24 hours a day, 7 days a week 773-889-3087 (phone).
Customer Assistance Operators English and Spanish.
8:00 a.m. to 6:00 p.m. CT Mon. through Fri. (except holidays) 773-889-3087 (phone).
Questions English and Spanish.
Faxes can be received at 773-622-2269 (fax).
Technical Assistance English only.
www.cobra.com (on-line: Frequently Asked Questions).
English and Spanish. productinfo@cobra.com (e-mail).
CobraMarine™ VHF Radios
For Assistance Outside the U.S.A.
Power Inverters
Contact Your Local Dealer
Radar/Laser Detectors
Safety Alert® Traffic Warning Systems
Handheld GPS Receivers
Mobile GPS Navigation Systems
Accessories
Nothing comes close to a Cobra®
For more information or to
order any of our products,
please visit our website:
www.cobra.com
English
MOBILE RADIO
19 DX IV
Nothing comes close to a Cobra®
Printed in China
Part No. 480-170-P
Version A
English
© 2005 Cobra® Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707 USA
www.cobra.com
A1 English
Product Features
Introduction
Introduction
Product Features
Channel 9/
NOR/Channel 19
Button
CB/PA
Button
Product Features and
FCC Regulations
•
Product Features
Customer Service
•
Order Form
•
Features
• 40 CB Radio
Channels
TX Indicator
Icon
S/RF
Power Meter
LCD Channel
Display
Name
Address (No P.O. Boxes)
• Instant
Channels 9/19
NOR
City
Talk
Button
• Compact
Size
• Dynamic
Microphone
• Nine Foot
Microphone
Cord
On-Off/
Volume Knob
Squelch/
RF Gain Knob
Public
Address Jack
Channel
Selector Knob
External
Speaker Jack
Credit Card Number
Amount Shipping/Handling*
Shield
$10.00 or less . . . . . $3.00
Type: ❒ Visa ❒ MasterCard ❒ Discover
Exp. Date
Item #
U.S. Cost Each
Qty
Amount
$25.01-$50.00 . . . . . $7.50
RX
$50.01-$90.00 . . . . $10.50
TX
$90.01-$130.00 . . . $13.50
$130.01-$200.00 . . $16.50
$200.01 plus . . . . . 10% of
purchase
Audio
FCC Regulations
•
FCC Regulations
FCC regulations permit only “transmission” (one-party to another) rather than
“broadcast”
(to a wide audience). Thus, advertising is not allowed on CB channels
W
because that is “broadcasting”.
FCC Warnings
All transmitter adjustments other than those supplied by the manufacturer as front
panel operating controls, must be made by, or under the supervision of, the holder
of an FCC-issued general Radio-Telephone Operator’s License.
Replacement or substitution of transistors, regular diodes or other parts of a unique
nature, with parts other than those recommended by Cobra, may cause violation of
the technical regulations of Part 95 of the FCC Rules, or violation of Type Acceptance
requirements of Part 2 of the Rules.
You should read and understand Part 95 (included with this unit) of the FCC Rules
and Regulations, before operating your Cobra radio, even though the FCC no longer
requires you to obtain an operator’s license.
Antenna
Connector
Country
$10.01-$25.00 . . . . . $5.50
• RF Gain
Caution
Zip
Customer Signature
Microphone Connector Detail
• Front Panel
Microphone
Connector
Microphone
Connector
State/Province
Telephone
• PA System
A2 English
Order Form and
Optional Accessories
Power Connection
Nothing comes close to a Cobra® A3
*For AK, HI and PR add
additional $26.95 for FedEx
Next Day or $10.95 for
FedEx 2nd Day. Excludes
weekend and holiday
shipments.
Please allow two to three
weeks for delivery in the
U.S. Prices subject to
change without notice.
The Cobra
line of quality
products includes:
CB Radios
microTALK® Radios
Radar/Laser Detectors
Safety Alert® Traffic
Warning Systems
Handheld GPS Receivers
Mobile GPS
Navigation Systems
HighGear® Accessories
CobraMarine™ VHF
Radios
Power Inverters
Accessories
U.S. Subtotal
Tax Table
California . . . 7.25%
Illinois . . . . . 8.75%
Indiana. . . . . 6%
Michigan . . . 6%
Ohio. . . . . . . 6%
Wisconsin . . 5%
(Tax if Applicable)
Shipping/Handling
Total
Optional Accessories
You can find quality Cobra products and accessories at
your local Cobra dealer, or in the U.S.A., you can order
directly from Cobra.
•
Ordering from U.S.A.
Call 773-889-3087 for pricing or visit www.cobra.com.
For credit card orders, complete and return this order
form to fax number 773-622-2269. Or call 773-889-3087
(Press 1 from the main menu) 8:00 a.m. to 6:00 p.m. CT,
Monday through Friday.
Make check or money order payable to:
Cobra Electronics, Attn: Accessories Dept.
6500 West Cortland Street, Chicago, IL 60707 USA
To order online, please visit our website: www.cobra.com
Nothing comes close to a Cobra® 17
Introduction
Contents
Introduction
Our Thanks to You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
The Citizens Band Story . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Customer Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2
FCC Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Included in this Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation and Start-Up
Mounting and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating Your Mobile Radio
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Antenna Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
External Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Public Address (PA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Turning on Your Mobile Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CB Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Microphone Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Squelch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
RF Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting a Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Channel 9/NOR/Channel 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CB/PA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
S/RF Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TX Indicator LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ignition Noise Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Temporary Mobile Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating Procedure to Receive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating Procedure to Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance/Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Frequency Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Warranty
Limited One-Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Customer Assistance
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Order Form and Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . 17
Nothing comes close to a Cobra®
1
Introduction
Warnings and
Included in this Package
Warnings
Caution
Caution
Caution
Introductionand Start-Up
Installation
•
REPLACEMENT WARNING
Replacement or substitution of certain parts with replacements other than those
recommended
by Cobra may be a violation of the technical regulations of Part 95
W
of the FCC rules, or of Type Acceptance requirements of Part 2 of those rules.
When making adjustments, be sure to re-read applicable portions of this instruction manual
to make certain you are following correct procedure and that the radio was properly installed.
A FEW RULES THAT SHOULD BE OBEYED
1. You are not allowed to carry on a conversation with another station for more than five minutes
atWa time without taking a one-minute break to give others a chance to use the channel.
2. You are not allowed to blast others off the air by overpowering them with illegally
amplified transmitter power or illegally high antennas.
3. You are not allowed to use CB to promote illegal activities.
4. You are not allowed to use profanity.
5. You may not play music in your CB.
6. You may not use your CB to sell merchandise or professional service.
CHANNEL 9 EMERGENCY MESSAGES
Use Channel 9 for emergency messages only. The FCC gives the following examples
of permitted
and prohibited types of communications for use on Channel 9. These are
W
guidelines and are not intended to be all-inclusive.
Permitted: “A tornado sighted six miles of town.”
Not Permitted: “This is observation post number 10. No tornado sighted.”
Included in this Package
Mounting and Connections
Microphone Bracket
2
English
Microphone
CB Tranceiver
Antenna Connector
Fuse Connection
•
Operating Manual
Transceiver Bracket
•
Select a location for the transceiver and microphone bracket that is convenient for
operation. In automobiles, the transceiver is usually mounted to the underneath of
the dash panel, with the microphone bracket beside it.
A universal mounting bracket is supplied along with self
Transceiver Bracket
tapping screws and star washers. The transceiver is held
in the universal mounting bracket by two thumb screws,
permitting adjustment at the most convenient angle.
You should find all of the following items in this package:
CB Transceiver
Mounting and Connections
Microphone Connector
To mount and connect your transceiver:
1. Hold the radio with mounting bracket in the exact
location desired. Remove the mounting bracket
and use it as a template to mark the location for
the mounting screws.
2. Drill necessary holes and secure mounting
bracket in location.
3. Connect the antenna cable plug to the receptacle
marked “ANT” on the back of the unit.
4. Connect the red lead of the DC power cord
to an accessory 12 volt fuse.
5. Connect the black lead to the negative side
of the automobile. This is usually the chassis.
Any convenient location with good electrical
contact (remove paint) may be used.
NOTE
Before installing the CB radio, visually check the
vehicle battery connections to determine which
battery terminal, positive or negative (positive is
the larger of the two) is grounded to the engine
block (or chassis).
6. Mount the microphone bracket on right side
of the transceiver or near it using two screws
supplied. When mounting in an automobile,
place the bracket under the dash so the
microphone is readily accessible.
7. Attach the four pin microphone cable to receptacle
on front of unit and install unit in bracket securely.
Nothing comes close to a Cobra®
3
Operating Your Mobile Radio
Operation
Operation
Antenna Connector
Operating Your Mobile Radio
•
Antenna Connector
Operation
Operation
On-Off/Volume Knob
This female Connector on the rear panel permits
connection of the transmission line cable male
connector to the transceiver.
•
Turning on Your Mobile Radio
Turn the On-Off/Volume knob clockwise to turn
the power on and set the desired listening volume.
CB Antenna
External Speaker
External Speaker Jack
Only a properly matched Antenna system will
allow maximum power output. In mobile installations
(cars, trucks, boats, etc.), an Antenna system that is
non-directional should be used. When installed in a
boat, the transceiver will not operate at maximum
efficiency without a ground plate unless the vessel
has a steel hull. Before installing the transceiver
in a boat, consult your dealer for information
regarding an adequate grounding system.
The external speaker jack on the rear panel is used
for an External Speaker. The external speaker should
have 8-ohm impedance and be rated to handle at
least 4.0 watts. When the external speaker is plugged
in, the internal speaker is automatically disconnected.
NOTE
Cobra external speakers are rated 15 watts.
Public Address (PA)
PA Speaker Jack
An external PA speaker may be connected
to the PA speaker jack when used as a public
address system. The speaker should be directed
away from the microphone to prevent acoustic
feed-back. Physical separation or isolation of
the microphone and speaker must be employed
when operating the PA at high output levels.
Power Cable
Power
These wires supply Power to the CB radio.
This cable is permanently attached to the radio.
If you wish to remove the radio after installation,
disconnect at fuse holder and ground connector.
4
English
NOTE
Cobra loaded-type antenna models HGA 1000,
HGA 1500 and HGA 2000 are highly recommended
for most installations. Consult your Cobra dealer
for further details (or see order form on page 17).
Three-way combination antennas are available
which allow operation of all three bands (AM-FM
and CB), using a single antenna. However, use
of this type of antenna usually results in less
than normal transmit and receive range when
compared to a standard-type “Single Band”
antenna designed for CB only.
Microphone Connector
Microphone Connector
Allows for convenient removal of the Microphone plug
when storage is required. The Microphone MUST be
connected to the unit at all times, when in use, for
proper operation.
Nothing comes close to a Cobra®
5
Operating Your Mobile Radio
Operation
Operating Your Mobile Radio
Operation
•
Squelch
Operation
Channel Selector Knob
This control is used to cut off or eliminate receiver background noise in the absence
of an incoming signal. Adjust until the receiver noise disappears. This will require the
incoming signal to be slightly stronger than average receiver noise. Further clockwise
rotation will increase the threshold level which a signal must overcome in order to be
heard. Only strong signals will be heard at a maximum clockwise setting.
Squelch is the “control gate” for incoming signals.
Adjust Squelch/RF Gain Knob
To squelch your radio:
1. Full clockwise rotation closes the gate,
allowing only very strong signals to enter.
2. Full counterclockwise rotation opens
the “gate,” allowing all signals in.
3. To achieve the Desired Squelch Setting (DSS),
turn the Squelch control counterclockwise until
you hear noise. Now turn the control clockwise
just until the noise stops. This is the DSS setting.
Gate Closed
Gate Open
Desired Squelch Setting (DSS)
Strong Signals
Strong Signals
Strong Signals
Medium Signals
Medium Signals
Medium Signals
Weak Signals
Weak Signals
Weak Signals
Noise
Noise
Noise
Channel 9/NOR/Channel 19 Button
CB/PA Button
English
CB/PA
In the CB position, the PA function is disabled
and the unit will transmit and receive on the
selected channel. The PA function should not
be used unless a PA speaker is connected. In the
PA position, the transmit function is disabled and
the microphone output will go only to the PA speaker.
S/RF Power Meter
Shows relative transmitter RF output power
and input signal strength when receiving.
The Liquid Crystal Display (LCD) segments
increase with signal strength.
This control is used to adjust receiver sensitivity. Maximum sensitivity allows
weak signals to be received. However, very strong signals (such as from a nearby
transmitter) can cause distortion at that setting. Adjust until the distortion disappears.
Reducing the receiver’s RF Gain eliminates distortion from very strong incoming signals.
6
Channel 9/NOR/Channel 19
Set CH 9 to obtain instant access
to the emergency channel.
Set NOR position to use the channel knob
to choose any of the 40 channels.
Set CH 19 to obtain instant access to
the information and calling channel.
S/RF Power Meter
To set RF Gain:
1. Full counterclockwise rotation minimizes
gain for maximum distortion control.
2. To achieve the desired level of distortion control,
turn the RF Gain knob counterclockwise until
the distortion is eliminated.
3. After moving away from the strong signal,
turn the RF Gain knob fully clockwise to
receive all possible signals.
•
Selecting a Channel
Rotate the Channel knob clockwise
until desired channel is displayed.
RF Gain
Adjust Squelch/RF Gain Knob
Operation
TX Indicator
TX Indicator
The TX Indicator will light when in the
transmit mode. “Busy” will appear when
there is an incoming signal.
Nothing comes close to a Cobra®
7
Operating Your Mobile Radio
Operation
Operation
Operating Your Mobile Radio
•
Ignition Noise Interference
Use of a mobile receiver at low signal levels is normally limited by the presence
of electrical noise. Under most operating conditions, when signal level is adequate,
the background noise does not present a serious problem. Also, when extremely
low level signals are being received, the transceiver may be operated with vehicle
engine turned off. The unit requires very little current and therefore will not
significantly discharge the vehicle battery.
Even though this radio has an automatic noise limiter, in some installations
ignition interference may be high enough to make good communications
impossible. Consult your authorized Cobra dealer or a two-way radio technician
for help in locating and correcting the source of severe noise.
Operation
On-Off/Volume Knob
Adjust Squelch/RF Gain Knob
For Temporary Mobile Operation, you may want to purchase an additional cigarette
lighter adapter from your Cobra dealer. This adapter and a magnetic mount antenna
allow you to quickly “install” your transceiver for temporary use.
PA
EXT
ANT
13.8V DC
8
English
NOTE
Red Wire is connected to positive side
of socket center tip. Black Wire is connected
to negative side contacts.
Radio resets to CH 9 when connected to
cigarette lighter plug.
When using the unit with cigarette adapter,
turn off when not in use to avoid draining
the battery.
•
Operating Procedure to Receive
Be sure that power cord, antenna and microphone
are connected to the proper connectors before
proceeding further. The CB/PA switch should be
in the CB position.
Temporary Mobile Operation
Temporary Mobile Operation
Operation
To receive:
1. Turn the radio on by rotating the
On-Off/Volume knob clockwise.
2. Rotate the Squelch/RF Gain knob
counterclockwise until incoming
signal is heard.
3. Select the desired channel.
4. Set the On-Off/Volume knob and the
Squelch/RF Gain knob to a comfortable
listening level.
Operating Procedure to Transmit
Be sure the antenna is properly connected to the radio before transmitting.
Prolonged transmitting without an antenna, or with a poorly matched
antenna, could cause damage to the transmitter.
Press-to-Talk Switch
To transmit:
1. Select the desired channel.
2. The receiver and transmitter are controlled by
the Press-to-Talk switch on the microphone.
Press the switch and the transmitter is activated;
release switch to receive. When transmitting
(on a clear channel), hold the microphone
two inches from the mouth and speak clearly
in a normal voice.
Nothing comes close to a Cobra®
9
Operating Your Mobile Radio
Maintenance/Adjustment
Maintenance/Adjustment
•
Your Cobra CB transceiver is specifically designed for the environment encountered
in mobile installations. The use of all solid state circuitry and its light weight result
in high reliability. Should a failure occur, however, review the following, then if
necessary, replace parts only with identical parts. Do not substitute.
1. Check connections to the source of power
Check Power Source
and make sure it is the 13.8 VDC required
to operate your radio.
2. Check the fuses in the DC power cord.
The main power lead (red) has a two amp
3AG type fuse in its holder. Use only the
above specified type and size fuse for
maximum protection. Failure to do so
Check Fuses in DC Power Cord
will void the warranty.
3. Make certain the microphone is properly
plugged in.
4. Make certain the antenna is properly
assembled and connected.
If you are unable to correct the problem,
refer to product service on page 14 for
the correct procedure for warranty and
Check Microphone Connection
post-warranty service from Cobra.
Check Antenna Connection
10 English
Frequency Ranges
Operating Your Mobile
CB Radio
Radio
Frequency Ranges
The Cobra 19 DX IV transceiver represents one of the most advanced AM
two-way radios for use as a Class D station in the Citizens Radio Service.
This unit features advanced Phase Lock Loop (PLL) circuitry providing
complete coverage of all 40 CB channels.
CB
Channel
Channel Frequency
in MHz
CB
Channel
•
Channel Frequency
in MHz
1
26.965
21
27.215
2
26.975
22
27.225
3
26.985
23
27.255
4
27.005
24
27.235
5
27.015
25
27.245
6
27.025
26
27.265
7
27.035
27
27.275
8
27.055
28
27.285
9
27.065
29
27.295
10
27.075
30
27.305
11
27.085
31
27.315
12
27.105
32
27.325
13
27.115
33
27.335
14
27.125
34
27.345
15
27.135
35
27.355
16
27.155
36
27.365
17
27.165
37
27.375
18
27.175
38
27.385
19
27.185
39
27.395
20
27.205
40
27.405
Nothing comes close to a Cobra® 11
Operating Your Mobile Radio
Specifications
Specifications
Warranty
•
General
Channels
CB – 40 CH
Frequency Range
CB – 26.965 to 27.405 MHZ
Frequency Tolerance
0.005 %
Frequency Control
PLL (Phase Lock Loop) Synthesizer
Operating Temperature Range
-30° C TO + 65° C
Microphone
Plug-in dynamic
Input Voltage
13.8VDC nom. (negative ground)
Current Drain
Transmit: AM full mod., 1.4A (maximum)
Receive: Squelched, 0.9 A;
full audio output, 1.2A (nominal)
Size
6 7⁄8" D x 6 3⁄4" W x 17⁄8" H
Weight
3.25 lbs.
Antenna Connector
UHF; SO-239
Meter
LCD’s; indicates relative power
output and received signal strength
Transmitter
Power Output
4 watts
Modulation
AM (Amplitude Modulation)
Frequency Response
300 to 3000 Hz
Output Impedance
50 ohms, unbalanced
Receiver
Warranty and Trademark
Acknowledgement
Limited One-Year Warranty
•
For Products Purchased in the U.S.A.
Cobra Electronics Corporation warrants that its Cobra CB radios, and the component
parts thereof, will be free of defects in workmanship and materials for a period of
one year from the date of first consumer purchase. This warranty may be enforced
by the first consumer purchaser, provided that the product is utilized within the U.S.A.
Cobra will, without charge, repair or replace, at its option, defective CB radios,
products or component parts upon delivery to the Cobra Factory Service department,
accompanied by proof of the date of first consumer purchase, such as a duplicated
copy of a sales receipt.
You must pay any initial shipping charges required to ship the product for warranty
service, but the return charges will be at Cobra’s expense, if the product is repaired
or replaced under warranty.
This warranty gives you specific legal rights, and you may also have other rights
which may vary from state to state.
Exclusions: This limited warranty does not apply: 1) To any product damaged
by accident; 2) In the event of misuse or abuse of the product or as a result of
unauthorized alterations or repairs; 3) If the serial number has been altered,
defaced or removed; 4) If the owner of the product resides outside the U.S.A.
All implied warranties, including warranties of merchantability and fitness for a
particular purpose are limited in duration to the length of this warranty. Cobra
shall not be liable for any incidental, consequential or other damages; including,
without limitation, damages resulting from loss of use or cost of installation.
Some states do not allow limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations may not apply to you.
For Products Purchased Outside the U.S.A.
Please contact your local dealer for warranty information.
Sensitivity
Less than 1 µV for 10dB (S+N)
Selectivity
6 dB @ 7 KHz, 60 dB @ 10KHz
Trademark Acknowledgement
Image Rejection
60 dB, typical
Adjacent-Channel Rejection
50 dB, typical
Automatic Noise Limiter
Built-in
Cobra®, Nothing comes close to a Cobra® and the snake design are registered
trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™
is a trademark of Cobra Electronics Corporation, USA.
12 English
•
Nothing comes close to a Cobra® 13
Customer Assistance
Product Service
Product Service
If you have any questions about operation or installing your new
Cobra product, or if you are missing parts…
Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE!
See customer assistance on page A1.
Customer Assistance
•
For Products Purchased in the U.S.A.
If your product should require factory service, please call Cobra first before sending
your radio. This will ensure the fastest turn-around time on your repair. You may be
asked to send your radio to the Cobra factory. It will be necessary to furnish the
following to have the product serviced and returned.
1. For warranty repair include some form of proof-of-purchase, such as a mechanical
reproduction or carbon of a sales receipt. If you send the original receipt, it cannot
be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the radio. Include a typed
or clearly printed name and address of where the radio is to be returned.
4. Pack radio securely to prevent damage in transit. If possible, use the original
packing material.
5. Ship prepaid and insured by way of a traceable carrier such as
United Parcel Service (UPS) or Priority Mail to avoid loss in
transit to Cobra Factory Service, Cobra Electronics Corporation,
6500 West Cortland Street, Chicago, Illinois 60707 U.S.A.
6. If the radio is in warranty, upon receipt of your radio it will either be
repaired or exchanged depending on the model.
Please allow approximately three to four weeks before contacting Cobra
for status. If the radio is out of warranty, a letter will automatically be sent informing
you of the repair charge or replacement charge. If you have any questions, please
call 773-889-3087 for assistance.
14 English
Product Service
For Products Purchased in Canada
For out of warranty service, ship prepaid this product to: AVS Technologies Inc.,
2100 Trans Canada Hwy S., Montreal, Quebec, H9P 2N4. We reserve the right to
repair or replace the radio with an equivalent product. Please include the following
information: Date of Purchase, Model Number, Dealer Purchased From,
Dealer Address, Dealer Phone Number.
For Products Used in Canada
Industry Canada Notice
Operation is subject to the following two conditions: 1) this device may not cause
interference, and 2) this device must accept any interference, including interference
that may cause undesired operation of this device.
For Products Purchased Outside the U.S.A. or Canada
Please contact your local dealer for product service information.
Nothing comes close to a Cobra® 15
Customer Assistance
Accessories
Replacement
Microphone Bracket
741-080-9-001
Four Pin Premium
Noise-Cancelling Microphone
HG M84
Four Pin Replacement
Dynamic Microphone
HG M73
21" Base Loaded Magnet
Mount Antenna
HG A1000
Dynamic
External Speaker
HG S100
16 English
HG S300
Noise Canceling
External Speaker
HG A1500
38" Base Loaded Magnet
Mount Antenna
HG M77
Four Pin Noise Canceling
Microphone
HG M84W
Wood Grain
Four Pin Premium NoiseCancelling Microphone
251-353-9-001
Replacement
Mounting Bracket
Accessories
$0.45
$74.95
$19.95
$28.95
$21.95
$4.50
$74.95
$30.95
$46.95
$28.95
Replacement
Thumb Screws
634-081-9-001
Four Pin Power
Microphone
HG M75
54" Base Loaded Magnet
Mount Antenna
HG A2000
Noise Canceling With
Talk Back External Speaker
HG S500
•
$0.60
$25.95
$99.95
$32.95
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising