ZTE WP228 CDMA Wireless Phone User Guide

ZTE WP228 CDMA Wireless Phone User Guide
Know Your Phone
 Confirm the commands and options selected.
2:OK Key
 Confirm the characters inputting.
 Enter the middle-bottom submenu on the screen.
LCD Screen
3: Left select key
4: Number keys
 Enter main menu.
 Input numbers and characters.
CDMA Wireless Phone
 Perform different functions under different
User Guide
 In standby mode, hold the * key to lock the
phone, follow the prompt on the screen to unlock
the phone.
 In standby mode, hold the # key to turn on/off the
silent mode.
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any
form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Version No. : 1.0
Edition Time : 12 31. 2011
Manual No. : 079584504180
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26779999
URL: http://www.zte.com.cn E-mail: [email protected]
There are two ZTE WP228 models. One needs UIM card inserted in,
the other does not need.
Section or function marked with “★” is only available to the model
with UIM card. Otherwise, it is available to both models.
Key Instruction
1: Scrolling keys  Press these keys to scroll cursor to the left,
right, up or down when inputting characters or
selecting items.
Right key)
5: * key, # key
6: Right select
 Enter the left-bottom submenu on the screen.
 If you are using the handset to call and want to
 Enter right-bottom submenu on the screen.
transfer the call to the speakerphone, press this
key and hang up the handset to put conversation
on the speakerphone.
 Press this key to end a hands-free call.
In this guide, “press” a key means to press the key once, “hold” a key
means to press the key for 2 or 3 seconds.
Signal strength
New message
Silent mode
Hands-free mode
Power indicator
Alarm clock
 Return to the previous page.
7:CLR/BACK key  Erase character(s) when inputting characters.
 End an active call or reject a call.
8: EXIT key
 Hold this key to Power on/Power off the phone.
 Exit from any interface to standby mode.
 Make a call or answer an incoming call.
 In standby mode, press this key to enter recent
calls list.
Connect phone set and handset via phone cord.
2. External power adapter
Connect the external power adapter to external AC socket.
How to Power On/Off
 Hold the EXIT key to power on the phone.
 When the phone is powered on, hold the EXIT key to power off the
Interface Icons
3. ★UIM Card
 Power off the phone and remove other external power.
 Take off the back cover and remove the battery of the phone.
 Insert UIM card into UIM card slot. Make sure that the contact area
of the card is facing down, and the beveled corner matches with the
UIM card slot.
 Put in the battery and install the back cover.
It is strongly recommended to connect the phone to external power
outlet, and use internal battery to power your phone only when external
power fails or is not available. The phone will charge the internal battery
automatically when it is connected to external power outlet.
How to Make a Call
There are two methods for making a call.
 The first method:
1. Pick up the handset or press the Hands-free key.
2. Enter the phone number, wait for several seconds to send the call
automatically or press the CALL/REDIAL key to make the call.
Select recipient’s number from Contacts, or press the CALL/REDIAL
key to select a number from the recent calls list, and then press the
CALL/REDIAL key to make the call.
 The second method:
Enter the number or select recipient’s number from Contacts, or
press the CALL/REDIAL key to select a number from the recent calls
list, and then press the CALL/REDIAL key to make the call.
 Add the international prefix, country code and area code (without the
leading 0) before the number when making an international call.
 Hold the 0 key for the international prefix “+”, or input international
prefix e.g. “00” directly.
Select Menu→Messages.
• Select New Message to create new message: key in receiver’
s phone number or press the OK key to select from Contacts list,
press the Down key to input message text, Press the OK key to
send the message.
• Select Inbox to view messages received.
• Select Drafts to view draft you saved.
• Select Outbox to view the stored messages.
• Select Sent to view the sent messages.
• Select SMS Settings to set the message configuration.
• Select Templates to view or edit the default text.
• Select Delete Message to erase certain messages.
• Select Memory Status to view the memory information of message
Text Input
★ How to Access Network
1. Connect the phone and the computer with the USB data cable.
2. Install the ZTE dial-up software JoinME.
3. You can access network by JoinME.
Phone Code
Phone code could prevent your phone from illegal using. The default
handset password is 0000. Change it to your own phone password as
soon as possible.
Remember the handset password; otherwise some service expense may
Input Letters
Input Words
Input Digits
letter key till the letter appears.
eHiText Input — “Eng”, press any key once to key in
any word.
Numbers Input — “123”, press digital key once.
Symbols Input — Press the * key to enter the
Input Symbol
symbols mode and press corresponding digital key.
Or press the “1” key till the symbol (common
symbols) appears except for numbers input mode.
★ PIN Code and PUK Code
PIN code and PUK code may be offered together with the UIM card. If
not, please contact with network operator. Change default PIN code to
your own as soon as possible.
PIN code: PIN code could prevent your phone from illegal use. You
should input the PIN code when entering some menus.
PUK code: The UIM card will be locked if you enter a wrong PIN code
consecutively for three times. You need PUK code to unlock it.
Multitap Input — “Abc/abc/ABC” press corresponding
Input Space
Press the “0” key, except for the numbers input
Erase Character Press the CLR/BACK key.
Move cursor
Change input
Press the Scrolling keys.
Press the # key to select another text mode.
Menu Function
The contents in the following table briefly describe the functions of the
Add Name
All List
Speed Dials
Memory Status
Call History
Call Duration
Add a new contact to the
phone or the UIM card (★).
View all the contacts in the
phone or UIM card (★).
View the Group’s name
and change some related
settings about the group.
Speed Dials
Call a contact by holding a
number key (1~9) for a few
Memory Status
Check the storage
information about the phone
or UIM card (★).
Menu→Call History→
Call History
View the call history.
Menu→Call History→
Call Duration
View the dialed/answered
/all calls’ time, and you can
also clear the call time.
Select and modify the phone
Display Settings
Display Settings
You can change the settings
of screen or banner.
Set the phone or view the
Phone Settings
version information of the
Call Settings
Time & Day
To the Owner
Make the call settings.
Menu→Settings→Time & Set the time and date
Day Settings
Security Settings
Menu→Magic Box→
Menu→Magic Box→
Change the settings about
the phone/PIN (★) code,
restore factory settings and
clear user data.
Set reminder time.
Use calculator to count.
 Some electronic devices are susceptible to electromagnetic
interference sent by phone if inadequately shielded. Use phone
at least 20 cm or as far away as you can from TV sets, radio and
other automated office equipment so as to avoid electromagnetic
 Operating phone may interfere with medical devices like hearing
aids and pacemakers, or other medical devices in hospital. Consult
a physician or the manufacturer of the medical device before using
 Be aware of the usage limitation when using phone at places such
as oil warehouses, or chemical factories, where there are explosive
gases or explosive products being processed, because even if your
phone is in idle state, it still transmits radio frequency (RF) energy.
Therefore, power off your phone if required.
 Keep out of the reach of small children. Phone may cause injury if
used as a toy.
 Do not put other things on the terminal to avoid overlaying radiator.
Phone Use
 Please use original accessories or accessories that are authorized
by the manufacturer. Using any unauthorized accessories may affect
your phone’s performance, and violate related national regulations
about telecom terminals, or even endanger your body.
 As your phone can produce electromagnetic field, do not place it near
magnetic items such as computer disks.
 Do not expose your phone to direct sunlight or store it in hot areas.
High temperatures can shorten the life of electronic devices.
 Return the wear-out battery to the provider or put it in the appointed
recycle place. Do not put it in familial rubbish.
Warning: If the battery is broken, keep away from substance inside. If it
taints your skin, wash your skin with abundant fresh water and ask doctor
 Prevent liquid from leaking into your phone.
for help if necessary.
 Disconnect external power supply and do not use your phone during
Safety and General Use in Vehicles
 Before making or answering a call, you should pay attention to the
 Unplug the external power adapter or remove battery when your
phone is not in use, esp. for a long period of time.
 It is highly recommended to charge the battery before initial use. The
battery might have been discharged during storage and delivery.
 Do not unplug the connector of the data cable from phone, and not
install or remove battery, when the power is on.
local laws about using wireless mobile phones and take them into
account in practical use.
 Safety airbag, brake, speed control system and oil eject system
shouldn’t be affected by wireless transmitting. If you do meet
problems above, contact your automobile provider.
 Power off your mobile phone when refueling your automobile, and
 Keep phone power on and in service area when make emergency
so do the place where duplex wireless equipments are banned. Don’
call. Enter emergency call number in status of standby, and then
t put your phone together with flammable or explosive items, inner
press Call key to send.
spark may cause fire.
 Do not attempt to disassemble the phone by yourself. Non-expert
handling of the devices may damage them.
Battery Use
 The phone is non-waterproof, keep it dry and store in shaded and
 If you want to clean your phone, use clean fabric that is a bit wet or
anti-static. Do not use harsh chemical cleaning solvents or strong
 Do not store battery in hot areas or dispose of it in a fire to avoid
The warranty does not apply to defects or errors in the product caused
(a) Reasonable abrasion.
(b) Misuse including mishandling, physical damage, improper installation,
unauthorized disassembly of the product.
(c) Water or any other liquid damage.
(e) Power surges, lightning damage, fire, flood or other events outside
ZTE’s reasonable control.
(f) Use of the product with any unauthorized third party products such as
generic chargers.
(g) Any other cause beyond the range of normal usage for products.
End User shall have no right to reject, return, or receive a refund for any
product from ZTE under the above-mentioned situations.
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose, unless
otherwise required under the mandatory provisions of the law.
detergents to clean your phone such as alcohol, dilution agent and
benzene. Power-off your phone before you clean it.
 Never use any charger or battery damaged or worn out.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental
or consequential damages resulting from or arising out of or in connection
with using of this product, whether or not ZTE had been advised, knew
or should have known of the possibility of such damages, including, but
not limited to lost profits, interruption of business, cost of capital, cost of
substitute facilities or product, or any downtime cost.
 Use phone within a temperature range of -10°C~+55°C and the
There is incoming call, but no
prompt ring tone.
If your phone appears following phenomenon in the process of operation,
please read following relative information at first. If the problems still can
not be solved, please contact the distributor or service provider.
Check Point
Check the silent mode and the volume
of ring tone.
There is no prompt tone when
Check whether the alarm clock is
the alarm clock has reached the
enabled or not.
Cannot send short message.
Check the network condition.
Other abnormal phenomenon.
Please first refer to user guide, then
check whether the power is connected
correctly or not, if there is no problem,
please restart the phone.
(d) Any unauthorized repair or modification.
This warranty is end user’s sole remedy and ZTE’s sole liability for
Cleaning and Maintenance
cool place.
 Do not short-circuit the battery, as this can cause excessive heat and
Limited Warranty
Check Point
When switching on the phone,
it prompts “Enter phone
Enter phone code you set already to
unlock the phone.
Incorrect display of system time.
Check whether the system signal is
too weak.
No corresponding response
when press the phone keys
(after several attempts).
Restart the phone.
No display on screen when
disconnect external power
Check whether the battery has
electricity or it is damaged, or restart
the phone.
humidity less than 95%.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF