CATALOGUE CLASSIC Series

CATALOGUE CLASSIC Series
CATALOGUE
CLASSIC Series
THE POWER
OF EXPERIENCE
ESD safe
All JBC products comply with EC regulations,
and the ESD recommendations.
2
More than 80 years of experience have placed JBC at
the technological forefront of tools for soldering and rework
operations in electronics.
Innovation, efficiency and reliability are the key features of a
wide range of products which have been designed to satisfy
the most demanding requirements of professionals.
High technology,
superior quality.
Making the products perfect is one of the main objectives
of JBC’s improvement and development program. The
R&D department has created the most innovative soldering
technologies, which JBC is proud to present in this catalog.
All JBC products comply with EC regulations and ESD
recommendations.
A global
organization at
your service.
JBC’s global organization of local offices and a distributor
network spanning 5 continents puts at your disposal a solid
commercial organization that guarantees quick and efficient
service.
www.jbctools.com
3
CLASSIC SERIES
Pencil soldering and
desoldering irons
14S
Page 6
30S
Page 6
LS 1100
Page 13
40S
Page 7
Soldering irons
with solder feed
system
Temperature-controlled
soldering iron
65S
Page 7
SL 2020
Page 10
US 1000
Page 13
DS DESOLDERING
Page 7
55N PULSMATIC
Page 8
UD 1500
Page 13
TS 1200
Page 13
TIPS
Page 14
ACCESSORIES
SPONGES
Page 13
www.jbctools.com
4
Shears
Page 18
tweezers
Page 19
DEsoldering pump
Page 9
METAL BRUSH
Page 13
TIPS CHANGING
Page 12
Soldering
Fast soldering
gun
IN 2100
Page 9
SENIOR
GAS
SG 1070
Page 11
50S
Page 16
150S
Page 17
80S
Page 17
325S
Page 17
SS 7300
Page 16
TIPS
Page 11
TIPS
Page 16-17
5
Pencil soldering and desoldering irons
The heating system used in the pencil-type soldering
irons enables all the heat produced by the element
to be utilized, and a rapid temperature recovery is
achieved.
The wide range of long-life tips and matching
accessories enables all kinds of electronics tasks to
be carried out.
All the 230V pencil-type soldering irons are equipped
with long-life tips and a PVC three-core cable and
plug; they are officially approved models and comply
with all the European standards.
The entire range of pencil-type soldering irons
the ST version. Incorporates a thermo-resistant
three-core cable instead of a PVC S version is also
available.
See page 16 for range of tips.
www.jbctools.com
6
14S 230V
30S 230V
REF.
REF.
2192052 Soldering iron 230V
with B-05 D tip
2192040 ST Thermo-resistant 230V
Characteristics
- Power : 11W
- Max. temperature: 340°C
- Delay to 300°C : 2min 30s
- Weight without cable: 18,5 gr.
- Total packaged: 100 gr.
Soldering iron 230V
with R-10 D tip
Soldering iron 24V without tip
Kit S30
Soldering iron with R-10 D tip
and holder.
3302040 ST Thermo-resistant 230V
3302056
9303074
9302300
Characteristics
- Power : 25W
- Max. temperature: 380°C
- Delay to 300°C : 2min 15s
- Weight without cable: 40 gr.
- Total packaged: 120 gr.
40S 230V
65S 230V
DS DESOLDERING IRON 230V
REF.
REF.
REF.
Characteristics
- Power : 26W
- Max. temperature: 380°C
- Delay to 300°C : 2min
- Weight without cable: 40 gr.
- Total packaged: 120 gr.
Characteristics
- Power : 32W
- Max. temperature: 440°C
- Delay to 300°C: 2min
- Weight without cable: 60 gr.
- Total packaged: 150 gr.
1402056 Soldering iron 230V
with R-10 D tip
9403072 Soldering iron 24V without tip
1402040 ST Thermo-resistant 230V
3652054 Soldering iron 230V
with R-20 D tip
9653072 Soldering iron 24V without tip
3652040 ST Thermo-resistant 230V
1322056 Desoldering iron 230V
with 20 DE tip
1322056 Desoldering iron 24V
with 20 DE tip
1322040 DST Termorresistente 230V
Characteristics
- Potencia: 25W
- Temperatura máxima: 350°C
- Tiempo para 300°C: 5min
- Peso soldador sin cable: 105 gr.
- Completo con envase: 185 gr.
7
55N Soldader feed iron 230V
These soldering irons enable solder wire to be fed through as
necessary, thus freeing the hand that normaly holds the solder
when soldering.
It allows you to increase the quantity of production and reduce
costs. Essential for repetitive jobs and where a “third hand” is
needed to hold the component when soldering.
REF.
2552016
Solder feed from external high-capacity reels can be arranged.
Adjusted for solder wire of Ø1mm
See page 14 for range of tips.
The soldering irons are fitted with a reel solder P/N.: 0002119.
Characteristics
- Power: 33W
- Max. temperature: 410°C
- Delay to 300°C: 3min
- Supplied with C-20 D Tip
- Weight without cable: 228g
- Total packaged: 520g
55N Pulsmatic Soldering iron 24V
REF. 9553074
SPARE SOLDER REELS
SN5450
Same characteristics as the soldering iron 55N
230V. Supplied without tip.
Spare reel with 50 g of 1 mm diameter 60%Sn / 40%Pb solder.
8
IN2100 Fast soldering iron 230V
It reaches its working temperature in just 25 seconds.
it is the ideal tool for on-site repairs, or when a quick and
powerful heat source is required.
REF.
2132058
It is fitted with a spiral spring which acts as a protector for
keeping the soldering iron hot, and as a support when working.
See page 14 for range of tips.
Characteristics
- Power supply 230V.
- Initial power 200W.
- Maintenance power 60W.
- Rapid heating to 200°C cm approx 25 seconds.
- Supplied with T-20 Long-Life tip.
- Weight of soldering gun without cord 110gr.
- Packaged weight 210gr.
DU1191 Desoldering pump
REF.
0119107
With great efficiency, it delivers an absorption volume that is 50%
higher than other such pumps.
One hand is all that is needed to operate it, since the loading system
can be operated with just one finger (fig. 1) or by pressing down on
any surface (fig. 2).
Replacement nozzle Ø 2.4 mm P/N: 0119560.
1
2
www.jbctools.com
9
SL2020 Temperature controlled soldering iron 230V
With a highly reliable temperature control system built into the handle.
Its size and weight are similar to those of a pencil soldering iron.
This soldering iron is complete in itself, with a three-pin mains plug
and a heat resistant cable.
All its components are replaceable.
See page 14 for range of tips.
Characteristics
- Direct mains supply at 230V 50 Hz.
- Power: 40W
- Reserve power: 200W
- Temperature selection 100...400°C.
- Time to 300°C: 40 seconds.
- Fitted with R-10 D tip.
- Weight of soldering iron without cord: 70 g.
10
REF.
2020200
SG1070 Gas soldering iron 230V
The regulated power, variety of tips and the three different working
types allows you to carry out every single electronic job.
It is ideal for home repairs and wherever it is difficult to find electricity
supply.
REF.
0201070
Characteristics
- Piezo-electric ignition.
- Gas regulation equivalent to a power range of 25...125W.
- Maximum temperature: Soldering iron
580°C
Hot air
625°C
Mini-torch
1300°C
- Fuel: filtered butane gas.
- Transparent gas capsule.
- Gas capacity: 15 cm3
- Time between reloads: 2 hours at average power.
- Fitted with SF 2.4 tip.
- Empty weight: 150g
SG1070 different working modalities
Soldering iron
8 tip models for carrying out all kinds
of soldering in electronics work.
Maximum temperature: 580 °C.
Hot air
Capable of soldering and desoldering
SMD ICs, plastics moulding, etc.
Maximum temperature: 625 °C.
Mini blow-torch
For soldering with silver alloys.
Maximum temperature: 1300 °C.
COMPATIBLE TIPS for SG1070
REF.
Knife
0201860
hot blow
0201850
df 4.8
0201840
df 3.2
0201830
E 1:1
df 2.4
0201820
df 1.0
0201810
Sf 4.8
0201740
Sf 3.2
0201730
Sf 2.4
0201720
Sf 1.0
0201710
www.jbctools.com
11
Pencil series accessories
Tip inserter extractor clip
REF. 0114108
Tip changing accessory.
The different anchor points facilitate tip changing in all
soldering and desoldering iron models.
12
Soldering iron stands
US 1000
REF. 0290100
UD 1500
For soldering irons
For soldering irons
30 S, 40 S, 65 S, SL 2020, 50W and 70W
LS 1100
REF. 0290110
DS and 75W
TS 1200
For soldering irons
For soldering irons
14 S and 20W
metal brush
REF. 0297705
REF. 0290150
REF. 0290120
55N and 60W
spare sponge
REF. S0415
REF. 0781171
Sponge 53 X 53 cm (Standard)
(to use metal brush ref.:0297705).
Sponge 43 X 53 cm
www.jbctools.com
13
Tips
E 1:1
Long-Life soldering tips
The tips are made of copper protected by various layers: iron,
nickel and chromium, respectively, and they are also pretinned
and ready for use.
With this treatment, deformation and wear are thereby
avoided. Its working life is equivalent to 20 copper tips.
ø 1,2
14S
Ø 0,5
Ø 1
B-03D
0150805
B-05D
ø 1,7
ø 2,7
ø 3,7
3x1,8
3x1,5
Ø 1,5
Ø 0,5
REF. 0150300
55N
0150409
B-10D
Ø1
0550100
C-03D
0150607
B-40D
0550300
C-07D
0550400
C-10D
1,5x1
2x1
3x1,5
0400804
T-05D
0400705
T-10D
0550200
C-05D
0550509
C-20D
0550608
C-30D
0550707
CT -25D
30S / 40S / SL 2020 / IN 2100
Ø 1,2
REF. 0300707
PH-12D
14
Ø1
Ø 1,5
Ø 2,2
0390401
R-05D
0300905
R-10D
0300400
B-15D
Ø 2,3
0400200
B-16D
Ø3
0300806
T-L3D
0300509
T-20D
4,5x1,5
0300608
T-40D
E 1:1
Desoldering tips
E 1:1
High thermal performance P/N HT: This kind of tip has great heattransmission capability, and thus greater speed in desoldering. They
are not quite as durable as the armoured long-life type.
65S
Long-life P/N DE: These tips are heavily armoured inside and out.
They are very durable, though with lower heat-transmission.
4.5x1,5
3x1,5
Ø 2
6x2
DS
REF.
HIGH THERMAL
PERFORMANCE
LONG
LIFE
REF.
REF.
0650903
R-20D
HIGH THERMAL
PERFORMANCE
LONG
LIFE
Ø 0,7
Ø 0,7
Ø 1,7
0650606
T -25D
0650507Ø 2,2
T -55D
0320705
07 HT
Ø1
0650408 Ø 2,7
T -65D
0320903
09 HT
Ø1
Ø 2,7
0321100REF.
30 HT
0320500REF.
20 DE
0321200
31 HT
0320005
21 DE
Ø 0,7
Ø 0,7
Ø 1,7
Ø 2,2
0320705
07 HT
Ø1
Ø 2,7
0320903
09 HT
Ø 2,7
0321100
30 HT
0321200
31 HT
0320500
20 DE
0320005
21 DE
Ø 1,3
Ø 1,3
Ø 1,6
Ø 2,7
Ø 3,2
Ø 3,8
0321400
32 HT
Ø1
0321300
33 HT
0321500
35 HT
0320600
23 DE
0320800
25 DE
30S / 40S / SL 2020
REF.
0329920
DS ACCESSORY
E 1:1
www.jbctools.com
15
Senior Serie Soldadering iron
These sturdily-built soldering irons are big in capacity and
performance, and there are five power ratings to choose from.
They are ideal for working with electricity, power electronics,car
electrics and general industrial tasks.
Can be supplied with cooper tip or with long life tip (LD).
They are a supplied set for 230V, though other power settings
are available to order.
SS 7300 Stand
REF. 0187300
It can be used for all the senior soldering irons range,
the straight ones as well as the hammer-shape ones.
Fitted with a sponge and a wire brush to simplify tip
cleaning.
16
50 230V
REF.
50S
Cooper tip 230V
ref. 0502010
50S LD Long life tip 230V
ref. 0502020
Characteristics
- Power : 70W
- Maximum temperature: 460°C
- Time to reach 325°C : 4.5min
- Soldering iron weight: 220 g
Tips
Ref.
X/Y
Long life 50D
0500405
7,5 / 2
Cooper tip 50
0500108
5,5 / 1,5
80 230V
150 230V
325 230V
REF.
REF.
REF.
80S
Cooper tip 230V
ref. 0802010
80S LD Long life tip 230V
ref. 0802020
150S
Cooper tip 230V
ref. 0182010
150S LD Long life tip 230V
ref. 0182020
325S
Cooper tip 230V
ref. 0352010
325S LD Long life tip 230V
ref. 0352020
Characteristics
- Power: 95W
- Maximum temperature: 460°C
- Time to reach 325°C: 6min
- Soldering iron weight: 230 gr.
Characteristics
- Power: 150W
- Maximum temperature: 550°C
- Time to reach 325°C: 7min
- Soldering iron weight: 445 gr.
Characteristics
- Power: 300W
- Maximum temperature: 550°C
- Time to reach 325°C: 10min
- Soldering iron weight: 1.140 gr.
Puntas
Ref.
X/Y
Puntas
X/Y
Long life 80D
0800409
8,5 / 2
Puntas
Long life 150D
0180420
16,5 / 5
Cooper tip 80
0800102
7,5 / 1,5
Long life 325D 0350170
26,5 / 7,5
Cooper tip 150
0180140
15 / 3
Cooper tip 325
0350160
25 / 6
Ref.
Ref.
X/Y
E 1:2
www.jbctools.com
17
Shears and Tweezers for the electronics
Characteristics of the shears:
- Scissors type cutting action, makes the cutting easier and with a
great smoothness.
- S
teel with selective hardness treatment, which gives strengh to
the cutting edges and elasticity in the grips.
- E
rgonomic grip. Covered with antiskid vinyl foam, pleasant to
touch and designed for a most comfortable grip.
- R
eturn spring. Unlimited lifetime, very soft, makes the cutting
easier.
Characteristics of the tweezers:
- Made from matt finished anti-acid, anti-magnetic stainless steel.
- T
hanks to the tip design, they are well suited for both trough hole
insertion components and SMDs.
Shears
270
REF.
8001844*
Side cutting shears for soft wires up to 0.8 mm Ø.
Total length: 126 mm
Weight: 46 g
270 AS
REF.
8001970
Antistatic version
2175
REF.
8001877*
Side cutting shears for soft wires up to 1.6 mm Ø.
Total length: 149 mm
Weight: 79 g
2175 AS REF. 8001980
Antistatic version
140
Same as model 270, but made from special steel for extended
life.
REF.
8001976
Total length: 125 mm
Weight: 42 g
240
REF.
8001984
55° angle cutting shears for soft wires up to 0.8 mm Ø
Total length: 126 mm
Weight: 43 g
540
REF.
8001992
Very fine flat tip clip shears for precision jobs.
Total length: 140 mm
Weight: 50 g
* Supplied in boxes of 10 units.
18
740
REF.
8002008
Flat tip clip shears for general electronics use.
Total length: 128 mm
Weight: 43 g
760
REF.
8001802
Cutting and flattening shears, cuts and flattens soft
wires up to 0.8 mm Ø
Total length: 125 mm
Weight: 46 g
Clip ritenitore
REF.
8002925
Retains cut wire.
Adaptable to models 270 and 140.
8001844
Tweezers for general use in electronics.
Tweezers
AA SA
REF.
Length: 127 mm
OC SA
REF.
8002107
Very fine-tipped tweezers.
Length: 90 mm
2A SA
REF.
8002115
Round-tipped tweezers with large holding surface.
Length: 115 mm
3C SA
REF.
8002123
Very fine-tipped tweezers for miniature jobs.
Length: 90 mm
5 SA
REF.
8002131
Extrafine tip tweezers for facilitating field of view when
handling SMD components.
Length: 90 mm
7 SA
REF.
8002149
Curved tip tweezers for jobs requiring magnifying glass.
They leave the field of view clear.
Length: 115 mm
www.jbctools.com
19
0710-V3
www.jbctools.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement