Sloan Product Specification

Sloan Product Specification
XLERATOR® Sensor Activated
Surface Mounted Electronic Hand
Dryer
EHD501-CP
► Code Number
3366051
► Specifications
● Series commutated, through-flow discharge, vacuum type
motor/blower combination
● Infrared Optical Sensor with thirty-five (35) second lockout
feature
● Air velocity of 16,000 LFM (linear feet per minute) at an outlet
temperature of 135°F/57°C at a 72°F/22°C ambient room
temperature
● Decibel Rating of 78-80 dB
● Heating element constructed of Nichrome wire and protected
by an automatic resetting thermostat
● One piece heavy-duty rib reinforced die cast zinc alloy housing
● Bright chrome plate or chip-proof electrostatically-applied epoxy
finish
● Tamper-proof cover fasteners are included
► Colors
Chrome Plate
► Sensor Activated
► Electrical Specifications
XLerator® Hand Dryers operate by means of an Infrared Optical
Sensor. Once the user enters the sensor’s effective range, the Hand
Dryer will activate until the hands are withdrawn from the Sensor’s
detection zone or after thirty-five (35) seconds of continuous
operation.
Model EHD-501: 110/120 VAC, 12.5 Amp, 60 Hz, 1500 watts
► Electrical Requirements
● Install electrical line in the location shown in the Wiring Diagram
below.
● Electrical Connection Specifications
● Connect 110/120 VAC dryer to not more than a 20 Amp branch
circuit using #12 gauge or larger wire, and a 208/230/277 VAC
dryer to not more than a 15 Amp branch circuit using #14 gauge
or larger wire. DO NOT attach any other electrical devices to this
branch circuit.
● Important: ALL ELECTRICAL WIRING SHOULD BE INSTALLED IN
ACCORDANCE WITH NATIONAL/LOCAL CODES AND
REGULATIONS.
► Hygienic
Offers the ultimate in sanitary protection — there are no handles to
turn or buttons to push. Helps control the spread of infectious
diseases.
► Economical
XLerator® Hand Dryers dry hands in one-third the time required by
conventional hand dryers and operate on 15 amp service,
providing an 80% savings in energy costs.
► Compliance & Certifications
► Ultra-fast Drying
XLerator® Hand Dryers Completely dry hands in 10-15 seconds.
Water droplets are first blown from hands with a strong controlled
air blast. Residual moisture is then evaporated with a warm stream
of air up to 135° F/57° C.
This space for Architect/Engineer Approval
SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: 1-800-447-8329 or 1-847-671-4380 ● http://www.sloan.com
2017-16-10
Page 1 of 2
XLERATOR® Sensor Activated
Surface Mounted Electronic Hand
Dryer
EHD501-CP
► Installation Precautions
Mounting surface should be smooth and flat.
► Recommended Mounting Heights (from floor to
bottom of dryer)
Mount dryer at least 24 inches (610 mm) away from basins and at
least 20 inches (508 mm) away from corners.
User Height
Mount multiple hand dryers a minimum separation distance of 20
inches (508 mm) (measured center to center).
Women - 43 Inches (1092 mm)
Avoid installing hand dryers in narrow hallways and behind swinging
doors.
Children - 35 Inches (889 mm)
Men - 45 Inches (1143 mm)
Teenagers - 41 Inches (1041 mm)
Handicapped - 37 Inches (940 mm)
► OPERATION
When the Infrared Sensor detects hands beneath the exhaust port,
it activates the XLerator® Hand Dryer. Water droplets are first blown
from hands with a strong controlled air blast. Residual moisture is
then evaporated with a warm stream of air up to 135° F/57° C.
Prepare wall to receive mounting fasteners as shown in the rough-in
diagram. Refer to Installation Instructions for recommended
fasteners.
► ROUGH-IN
After hands are withdrawn from the Sensor’s detection zone, or
after a maximum of thirty-five (35) seconds of continuous operation,
the Hand Dryer automatically stops. It is then ready for the next user.
► WIRING DIAGRAM
SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: 1-800-447-8329 or 1-847-671-4380 ● http://www.sloan.com
2017-16-10
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising