DVD Home Theatre System - Site Maintenance in progress

Add to my manuals
116 Pages

advertisement

DVD Home Theatre System - Site Maintenance in progress | Manualzz
2-895-975-11(1)
DVD Home Theatre
System
Operating Instructions
DAV-DZ830W
©2007 Sony Corporation
Disposal of Old
Electrical & Electronic
Equipment (Applicable
in the European Union
and other European
countries with separate
collection systems)
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
Caution – The use of optical instruments
with this product will increase eye
hazard.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Do not expose the battery to excessive heat such as
direct sunlight, fire, or the like.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
This symbol on the product or on
its packaging indicates that this
product shall not be treated as household waste. Instead
it shall be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate
waste handling of this product. The recycling of
materials will help to conserve natural resources. For
more detailed information about recycling of this
product, please contact your local Civic Office, your
household waste disposal service or the shop where
you purchased the product.
Precautions
On power sources
This appliance is
classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
NOTICE FOR THE CUSTOMERS IN THE
UNITED KINGDOM
A moulded plug complying with BS1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS1362, (i.e.,
marked with mark
or
mark) must be used.
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover.
If you should lose the fuse cover, please contact your
nearest Sony service station.
2GB
• AC power cord (mains lead) must be changed only at
the qualified service shop.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet (mains), even if the unit itself has been turned
off.
• Install this system so that the AC power cord (mains)
can be unplugged from the wall socket immediately
in the event of trouble.
Welcome!
Thank you for purchasing Sony DVD Home
Theatre System. Before operating this system,
please read this manual thoroughly and retain it
for future reference.
Table of Contents
Welcome! ................................................ 2
About This Manual ................................. 5
This System Can Play the Following
Discs ................................................. 5
Getting Started – BASIC –
Step 1: Assembling
the Speakers ............................. 9
Step 2: Connecting the System and
TV ............................................. 16
Step 3: Positioning the System... 20
Step 4: Performing the Quick
Setup........................................ 22
Getting Started
– ADVANCED –
Turning off the Demonstration ............. 25
Installing the Speakers and the IR
transmitter on a Wall ...................... 26
Connecting the TV (Advanced) ............28
Connecting Other Components............. 32
Basic Operations
Playing Discs ................................ 34
Enjoying the Radio or Other
Components............................ 35
Enjoying TV or VCR Sound from All
Speakers.................................. 36
Selecting the Movie or Music
Mode ........................................ 37
Sound Adjustments
Enjoying Surround Sound by Using Sound
Field ................................................38
Enjoying Multiplex Broadcast Sound... 40
(DUAL MONO)
Resuming Playback from the Point Where
You Stopped the Disc..................... 43
(Resume Play)
Creating Your Own Program................ 44
(Program Play)
Playing in Random Order ..................... 46
(Shuffle Play)
Playing Repeatedly ............................... 47
(Repeat Play)
Using the DVD’s Menu ........................ 48
Changing the Sound.............................. 48
Selecting [ORIGINAL] or [PLAY LIST]
on a DVD-R/DVD-RW.................. 50
Viewing Information About the Disc ... 51
Changing the Angles ............................ 53
Displaying the Subtitles........................ 54
Adjusting the Delay Between the Picture
and Sound....................................... 54
(A/V SYNC)
About MP3 Audio Tracks and JPEG
Image Files ..................................... 55
Playing DATA CDs or DATA DVDs with
MP3 Audio Tracks and JPEG Image
Files ................................................ 57
Playing Audio Tracks and Images as a
Slide Show with Sound .................. 59
Enjoying DivX® Videos ...................... 61
Playing VIDEO CDs with PBC Functions
(Ver.2.0) ......................................... 63
(PBC Playback)
Tuner Functions
Presetting Radio Stations...................... 64
Listening to the Radio........................... 65
Using the Radio Data System (RDS) ... 66
Various Functions for Playing
Discs
Searching for a Particular Point on
a Disc .............................................. 41
(Scan, Slow-motion Play, Freeze
Frame)
Searching for a Title/Chapter/Track/
Scene, etc. ....................................... 42
Searching by Scene ............................... 43
(Picture Navigation)
continued
3GB
Other Operations
Controlling the TV with the Supplied
Remote............................................ 67
Using the THEATRE SYNC
Function .......................................... 68
Using the Sound Effect ......................... 70
Using the Sleep Timer .......................... 70
Changing the Brightness of the Front
Panel Display .................................. 71
Using the DIGITAL MEDIA PORT
Adapter ........................................... 72
Deactivating the Buttons on the Unit.... 73
(Child Lock)
Advanced Settings and
Adjustments
Locking Discs ....................................... 74
(CUSTOM PARENTAL
CONTROL, PARENTAL
CONTROL)
Getting Optimal Surround Sound for a
Room .............................................. 77
(SPEAKER FORMATION)
Calibrating the Appropriate Settings
Automatically ................................. 79
(AUTO CALIBRATION)
Using the Setup Display........................ 81
Setting the Display or Sound Track
Language ........................................ 83
[LANGUAGE SETUP]
Settings for the Display......................... 83
[SCREEN SETUP]
Custom Settings .................................... 85
[CUSTOM SETUP]
Settings for the Speakers....................... 86
[SPEAKER SETUP]
Returning to the Default Settings.......... 89
4GB
Additional Information
Precautions ........................................... 90
Notes about the Discs ........................... 91
Troubleshooting.................................... 91
Self-diagnosis Function ........................ 96
(When letters/numbers appear in
the display)
Specifications ....................................... 96
Glossary ................................................ 98
Language Code List............................ 102
Index to Parts and Controls ................ 103
Guide to the Control Menu Display ... 107
DVD Setup Display List..................... 110
System Menu List............................... 111
Index ................................................... 112
About This Manual
• The instructions in this manual describe the
controls on the remote. You can also use the
controls on the unit if they have the same or
similar names as those on the remote.
• The Control Menu items may vary depending
on the area.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs, and
DVD-RWs/DVD-Rs.
• Measurements are expressed in feet (ft) for
North American models.
• The following symbols are used in this
manual.
Symbol
This System Can Play the
Following Discs
Format of
discs
Disc logo
DVD VIDEO
DVD-RW/
DVD-R
DVD+RW/
DVD+R
Meaning
Functions available for DVD
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
Functions available for DVD-Rs/
DVD-RWs in VR (Video
Recording) mode
Functions available for VIDEO
CDs (including Super VCDs or CDRs/CD-RWs in video CD format or
Super VCD format)
Functions available for music CDs
or CD-Rs/CD-RWs in music CD
format
Functions available for DATA CDs
(CD-ROMs/CD-Rs/CD-RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)
video files
Functions available for DATA
DVDs (DVD-ROMs/DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)
video files
1)MP3
(MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
2)
DivX® is a video file compression technology,
developed by DivX, Inc.
3) DivX,
DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
VIDEO CD
(Ver. 1.1 and
2.0 discs)/
Audio CD
CD-RW/CD-R
(audio data)
(MP3 files)
(JPEG files)
“DVD-RW,” “DVD+RW,” “DVD+R,”
“DVD VIDEO,” and the “CD” logos are trademarks.
Note about CDs/DVDs
The system can play CD-ROMs/CD-Rs/CDRWs recorded in the following formats:
– audio CD format
– VIDEO CD format
– MP3 audio tracks, JPEG image files, and
DivX video files of format conforming to ISO
9660 Level 1/Level 2, or its extended format,
Joliet
continued
5GB
The system can play DVD-ROMs/DVD+RWs/
DVD-RWs/DVD+Rs/DVD-Rs recorded in the
following formats:
– MP3 audio tracks, JPEG image files, and
DivX video files of format conforming to
UDF (Universal Disc Format)
Example of discs that the
system cannot play
The system cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs other than those
recorded in the formats listed on page 5
• CD-ROMs recorded in PHOTO CD format
• Data part of CD-Extras
• DVD Audios
• Super Audio CD
• DATA DVDs that do not contain MP3 audio
tracks, JPEG image files, or DivX video files
• DVD-RAMs
Music discs encoded with
copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
About Multi Session CD
Also, the system cannot play the following
discs:
• A DVD VIDEO with a different region code
(page 6, 100)
• A disc that has a non-standard shape (e.g.,
card, heart)
• A disc with paper or stickers on it
• A disc that has the adhesive of cellophane tape
or a sticker still left on it
Notes about CD-R/CD-RW/DVD-R/
DVD-RW/DVD+R/DVD+RW
In some cases, CD-R/CD-RW/DVD-R/DVDRW/DVD+R/DVD+RW cannot be played on
this system due to the recording quality or
physical condition of the disc, or the
characteristics of the recording device and
authoring software.
The disc will not play if it has not been correctly
finalized. For more information, see the
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if
they have been correctly finalized. In this case,
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
6GB
• This system can play Multi Session CDs when
an MP3 audio track is contained in the first
session. Any subsequent MP3 audio tracks
recorded in later sessions can also be played
back.
• This system can play Multi Session CDs when
a JPEG image file is contained in the first
session. Any subsequent JPEG image files
recorded in later sessions can also be played
back.
• If audio tracks and images in music CD format
or video CD format are recorded in the first
session, only the first session will be played
back.
Region code
Your system has a region code printed on the
rear of the unit and will only play DVDs labeled
with the same region code.
DVD VIDEOs labeled ALL will also play on this
system.
If you try to play any other DVD VIDEO, the
message [Playback prohibited by area
limitations.] will appear on the TV screen.
Depending on the DVD VIDEO, no region code
indication may be given even though playing the
DVD VIDEO is prohibited by area restrictions.
Note about playback
operations of DVDs and
VIDEO CDs
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this system plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Be sure to read the
operating instructions supplied with the DVDs
or VIDEO CDs.
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
This system incorporates with Dolby* Digital
and Dolby Pro Logic (II) adaptive matrix
surround decoder and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
** Manufactured under license from DTS, Inc.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
7GB
Getting Started – BASIC –
Getting Started – BASIC –
See Unpacking in Specifications, page 96.
Inserting batteries into the remote
You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it
at the remote sensor on the unit.
Note
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
Attaching the foot pads to the subwoofer
Attach the supplied foot pads to the bottom of the subwoofer to stabilize the subwoofer and prevent it
from slipping.
8GB
Step 1: Assembling the Speakers
Note
• Spread a cloth on the floor to avoid damaging the floor.
Tip
• You can use the speaker without the speaker stand by installing it on the wall (page 26).
Use the screws illustrated below.
Screw (small, black)
1
Screw (small, silver)
Screw (large, with
washer)
Thread the speaker cord (and the speaker system cord) through the hole on the base
and post.
About the speaker cord
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Use the speaker cords as follows:
• Front speaker (L): White
• Front speaker (R): Red
• Surround speaker (R): Gray
• Surround speaker (L): Blue (used in Step 4)
continued
9GB
Getting Started – BASIC –
Before connecting the speakers, attach the speaker stand to the speaker.
(For the front and surround speakers.)
The procedure of assembling for the surround speaker (L) (the left surround speaker) is slightly
different from the others. (The surround speaker (L) has the IR receiver.) Any difference in procedure
is clearly indicated in the text, for example, “For the surround speaker (L).”
About how to connect the speaker cords to the SPEAKER jacks, see page 17.
Getting Started – BASIC –
For the front speakers and the surround speaker (R)
Be careful with the orientation of the post. Thread the speaker cord (and the speaker system cord)
into the end of the post that has 2 holes.
Post
Bottom of the base
2 holes
,
Speaker cord
Top of the base
For the surround speaker (L)
Be careful with the orientation of the post. Thread the speaker cord that should be connected to the
surround speaker (R) and the speaker system cord of the AC adaptor into the end of the post that
has 2 holes.
Post
Bottom of the base
2 holes
Speaker cord
(gray connector)
,
Speaker system cord of the AC adaptor (AC-SD1)
Top of the base
10GB
2
Attach the post cover to the other end of the post.
Speaker system cord
(surround speaker (L) only)
Thread the speaker cord (and the speaker system
cord) through the hole of the post cover.
Speaker cord
,
,
Hole
Post cover
Upper part of the
post
Screw (small, black)
3
Lay the post in the slot of the speaker, slide the post to the end of the slot, then secure
the post with the mounting plate and screws.
Select the speaker whose color of the jack on the rear panel of speaker matches the color tube of
the speaker cord.
Post cover
Be careful the
orientation of the
post cover when
placing the post.
Secure 2 screws (large, with
washer) in criss-cross pattern.
,
Rear of the speaker
(e.g., front speaker)
Mounting plate
* Speaker system cord (surround speaker (L) only)
continued
11GB
Getting Started – BASIC –
Orient the slot toward you, attach the post cover so that the slot of the post engages with the tab of
the post cover, then secure with the screw.
Getting Started – BASIC –
When securing the mounting plate, position the mounting plate depending on the desired height of
the speaker.
Low position
High position
After attaching the post to the base, you can adjust the height of the speaker.
4
Connect the speaker cords (and the speaker system cord) to the speaker.
When connecting the speaker cords, be sure to match the speaker cord to the appropriate terminal
on the components: 3 to 3, and # to #.
For the front speakers and the surround speaker (R)
Color tube
Front speaker (L): White
Front speaker (R): Red
Surround speaker (R): Gray
Rear of the speaker
(e.g., front speaker)
12GB
For the surround speaker (L)
Speaker cord
Connector
(gray)
Speaker system cord of the AC adaptor (AC-SD1)
Rear of the speaker
Connector
(blue)
SA-TS76W
Color tube
(blue)
continued
13GB
Getting Started – BASIC –
Use the speaker system cord of the AC adaptor (AC-SD1) only when connecting to the surround
speaker SA-TS76W.
5
Attach the post to the base.
Getting Started – BASIC –
Insert the post so that the slit on the lower part of the post aligns with the projection of the base,
then secure the post with the 2 screws.
e.g., front speaker
Post
Slit
,
Projection
Base
Screws
(small, silver)
Note
• Make sure that the slot on the post aligns with the projection of the base by rotating the post slightly.
6
Adjust the height of the speaker.
Loosen (but do not remove) the screws, adjust the height of the speaker, then secure the screws.
Adjust the speaker of one side, then adjust another speaker by checking lines as a guide.
Note
• When adjusting the height of the speaker, grasp the speaker so that the speaker does not fall.
e.g., front speaker
Lines
Post
Loosen 2 screws.
14GB
,
In addition to the screws
secured in Step 3, secure
2 more screws. (Secure 4
screws in total.)
7
Take up any speaker cord (and the speaker system cord*) slack.
* Surround speaker (L) only.
e.g., front speaker
Cord clamp
,
Secure the speaker cord by
running it through the slot.
Bottom of the base
Adjust the length of the cord.
Fully-assembled illustration
Front speaker (R):
Red label
Front speaker (L):
White label
Surround speaker (R):
Gray label
Surround speaker (L):
Blue label
IR receiver
Speaker
system cord
White
Red
15GB
Getting Started – BASIC –
Take up slack in the speaker cord (and the speaker system cord*) by pulling from the bottom of
the base and hook the speaker cord (and the speaker system cord*) in the cord clamp.
Getting Started – BASIC –
Step 2: Connecting the System and TV
The following is the basic connection of the unit to the speakers and TV. For other TV connections, see
page 28. For other component connection, see page 32.
To accept progressive signals, see page 30.
Refer to the connection diagram below, and read the additional information from 1 to 5 on the
following pages.
Front speaker (R)
Front speaker (L)
Center speaker
AM loop antenna (aerial)
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
CENTER
AM
DMPORT
SAT /
CABLE
DIR-T1
SPEAKER
WOOFER
DIGITAL IN
FM75
R AUDIO IN L
EURO AV
(DVD ONLY)
OUT
(DVD ONLY)
COAXIAL
OPTICAL
SAT/CABLE
Y
P B/C B
P R/C R
COMPONENT VIDEO OUT
OUTPUT(TO TV)
AC power cord (mains lead)
FM wire antenna
(aerial)
IR transmitter
Subwoofer
TV
Surround speaker (L)
Surround speaker (R)
AC adaptor
AC power cord (mains lead)
:Signal flow
16GB
1 Connecting the Speakers
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
To the SPEAKER jack
Color tube
(+)
(–)
Note
• Do not catch the speaker cord insulation in the SPEAKER jack.
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Stripped speaker cord is touching
another speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to
check that all the speakers are connected correctly. For details on outputting a test tone, see page 88.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker
other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this
happens, check the speaker connection again.
Note
• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords
are reversed, the sound will lack bass and may be distorted.
continued
17GB
Getting Started – BASIC –
Required cords
Getting Started – BASIC –
2 Connecting the TV
Required cords
SCART (EURO AV) cord (not supplied)
.
Be sure to connect the SCART (EURO AV) cord to the EURO AV T OUTPUT (TO TV) jack on the
unit.
When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB
signals. If the TV conforms to S video, change the input mode of the TV to RGB signals. Refer to the
operating instructions supplied with the TV to be connected.
Tip
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby
Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 38).
3 Connecting the Antenna (Aerial)
To connect the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
2
3
Remove only the loop part from the plastic stand.
Set up the AM loop antenna (aerial).
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
Insert the cord pushing
down the terminal clamp.
A
B
Insert until this
part.
Note
• Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
18GB
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
To connect the FM wire antenna (aerial)
Getting Started – BASIC –
Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack.
FM wire antenna (aerial)
(supplied)
FM wire antenna (aerial)
(supplied)
or
COAXIAL FM 75 Ω jack
COAXIAL FM 75 Ω jack
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial) as shown below.
Unit
Outdoor FM antenna (aerial)
4 Connecting the IR transmitter
Transmits the sound by the infrared signals. Connect it to the DIR-T1 jack.
Pink
SPEAKER
FRONT R
FRONT L
SUR R
SUR L
DIR-T1
SPEAKER
CENTER
WOOFER
DIGITAL IN
OUT
(DVD ONLY)
COAXIAL
OPTICA
SAT/CABLE
IR transmitter
5 Connecting the AC power cord (mains lead)
Before connecting the AC power cords (mains leads) of the unit and the AC adaptor to a wall outlet
(mains), connect the front, center speakers and subwoofer to the unit and surround speaker (R) to the
surround speaker (L).
19GB
Getting Started – BASIC –
Step 3: Positioning the
System
Side view
Infrared signal
10
10
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A).
Place the IR transmitter and IR receiver of the
surround speaker (L) in direct line with each
other. For details, see “To adjust the IR
transmitter and IR receiver of the surround
speaker (L)” (page 21).
Place speakers as illustrated below.
IR transmitter
IR receiver of the surround speaker (L)
The following diagram indicates the infrared
transmission area (the range that the infrared
rays can reach).
Top view
Infrared signal
10
10
IR transmitter
20GB
Approx. 10m
(33 ft)
Surround speaker (L)
IR transmitter
IR receiver
Approx. 10m
(33 ft)
Surround speaker (L)
Note
• Do not place the IR receiver of the surround speaker
(L) in a place exposed to direct sunlight or strong
light such as an incandescent lamp.
• The cord of the IR transmitter is for this system only.
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• Use caution when placing the speakers and/or
speaker stands that are attached with the speakers on
a specially treated (waxed, oiled, polished, etc.) floor,
as staining or discoloration may result.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
• Do not lean or hang on the speaker, as the speaker
may fall down.
Tip
• You can install the IR transmitter on a wall for better
positioning. For details, see page 27.
• You can swap the surround speaker (L) and (R)
positions, depending on the wall outlet and speaker
layout (page 21).
• If transmission is poor, you can also connect the
surround speakers to the unit by the speaker cords
(OPTION, gray/blue) (supplied).
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see “Getting Optimal Surround Sound for a
Room” (page 77) and “Calibrating the Appropriate
Settings Automatically” (page 79).
After connecting the speakers, AC adaptor, IR
transmitter, and the AC power cords (mains
leads), adjust the wireless system for good
transmission.
"/1
POWER
AC adaptor
POWER indicator
IR status indicator
IR receiver
Tip
• The IR transmitter is movable for easy reorientation.
• You can install the IR transmitter on a wall for better
positioning. For details, see page 27.
Note
• Make sure that there is no obstruction such as a
person or object between the IR transmitter and the IR
receiver of the surround speaker (L). Otherwise, the
sound from the surround speakers may be interrupted.
• If the IR status indicator turns orange, transmission is
not occuring. Adjust the position of the IR transmitter
and surround speaker (L) until the IR status indicator
turns green.
• If the IR status indicator flashes orange, the IR
receiver is receiving an infrared ray from another
Sony’s wireless product. Move the IR transmitter
and/or the surround speaker (L) so that the IR status
indicator turns green.
To place the surround speaker (L)
in the (R) position
Depending on the location of the wall outlet
(mains), you can also place the surround speaker
(L) in the (R) position if necessary.
1
2
3
Press SYSTEM MENU.
Press X/x repeatedly until “SL SR REV”
appears in the front panel display, then
press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “REV OFF”: sets the surround speaker (L)
in the (L) position.
• “REV ON”: sets the surround speaker (L) in
the (R) position.
Surround speaker (L)
4
Press
.
The setting is made.
1
Press POWER on the AC adaptor, then
press "/1 on the unit.
The AC adaptor and system turn on.
The POWER indicator of the AC adaptor
lights up and the IR status indicator of the
surround speaker (L) turns orange.
2
Orient the IR transmitter and the IR receiver
of the surround speaker (L) to face each
other.
5
Press SYSTEM MENU.
The system menu turns off.
Note
• If you perform the above, it is recommended that you
also change the speaker settings. For details, see
“Getting Optimal Surround Sound for a Room”
(page 77) and “Calibrating the Appropriate Settings
Automatically” (page 79).
Adjust the position until the IR status
indicator turns green.
21GB
Getting Started – BASIC –
To adjust the IR transmitter and
IR receiver of the surround
speaker (L)
Getting Started – BASIC –
Step 4: Performing the
Quick Setup
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
"/1
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SCREEN SETUP
TV TYPE:
YCBCR/RGB (HDMI):
SCREEN SAVER:
BACKGROUND:
LINE:
4:3 OUTPUT:
C/X/x/c,
DISPLAY
1
2
Turn on the TV.
7
Press [/1 on the unit and POWER on
the AC adaptor.
[16:9] (page 83)
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 24) and perform
again.
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
22GB
Press X/x to select the setting that
matches your TV type.
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
Note
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
13 with the headphones connected.
• Make sure that the function is set to “DVD”
(page 34).
3
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
VIDEO
FULL
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 83)
8
Press
.
The Setup Display for selecting the output
method for video signals from the EURO
AV T OUTPUT (TO TV) jack on the rear
panel of the unit appears.
SCREEN SETUP
TV TYPE:
16:9
YCBCR/RGB (HDMI):
YCBCR
ON
SCREEN SAVER:
BACKGROUND:
JACKET PICTURE
LINE:
VIDEO
4:3 OUTPUT:
VIDEO
RGB
9
Press X/x to select the output method
for video signals.
Note
• If your TV does not accept RGB signals, no
picture appears on the TV screen even if you
select [RGB]. Refer to the operating instructions
supplied with your TV.
10 Press
Getting Started – BASIC –
• [VIDEO]: outputs video signals.
• [RGB]: outputs RGB signals.
AUDIO IN / A.CAL MIC
Calibration mic
.
The Setup Display for selecting the speaker
formation appears.
11 Press C/c to select the speaker
formation image as the speakers are
actually positioned.
For details, see “Getting Optimal Surround
Sound for a Room” (page 77).
SPEAKER FORMATION
STANDARD(WIRELESS)
12 Press .
13 Connect the calibration mic to the
A.CAL MIC jack on the front panel and
press X/x to select [YES].
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic. Be quiet during the measurement.
14 Press
.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
Auto Calibration starts.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbor.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
continued
23GB
15 Unplug the calibration mic and press
Getting Started – BASIC –
C/c to select [YES].
1
Measurement complete.
FRONT L :
5.00m 0.0dB
FRONT R :
5.00m 0.0dB
CENTER :
5.00m + 1.0dB
SUBWOOFER :
5.00m + 4.0dB
SURROUND L :
3.00m - 2.0dB
SURROUND R :
3.00m - 2.0dB
If OK, unplug calibration mic and select
“YES”.
YES
To recall the Quick Setup display
Press
DISPLAY when the system is in
stop mode.
The Control Menu display appears.
2
Press X/x to select
press
.
[SETUP], then
The options for [SETUP] appear.
NO
12(27)
18(34)
T
0:00:02
DVD VIDEO
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
• When you select [SECOND ROOM] for
[SPEAKER FORMATION], measurement of
[SURROUND L] and [SURROUND R] is not
displayed.
16 Press
.
Quick Setup is finished. All connections
and setup operations are complete.
To quit the Quick Setup
Press
DISPLAY in any Step.
Tip
• If you change the position of the speakers, reset the
speaker settings. See “Getting Optimal Surround
Sound for a Room” (page 77) and “Calibrating the
Appropriate Settings Automatically” (page 79).
• If you want to change any of the settings, see “Using
the Setup Display” (page 81).
24GB
QUICK
QUICK
CUSTOM
RESET
BNR
3
Press X/x to select [QUICK], then press
The Quick Setup display appears.
.
Getting Started – ADVANCED –
Setting the demonstration
mode to on/off
3
"/1
Press SYSTEM MENU.
Press X/x repeatedly until “DEMO”
appears in the front panel display, then
press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “DEMO ON”: sets the demonstration
mode to on.
• “DEMO OFF”: sets the demonstration
mode to off.
4
Press
.
The setting is made.
X/x/c,
SYSTEM
MENU
5
Press SYSTEM MENU.
Getting Started – ADVANCED –
1
2
Turning off the
Demonstration
The system menu turns off.
After connecting the AC power cord (mains
lead), the demonstration appears in the front
panel display. When you press "/1 on the
remote, the demonstration turns off.
Note
• When you press "/1 on the unit, the demonstration
does not turn off.
• When you set the demonstration mode in the system
menu to on, the demonstration does not turn off even
though you press "/1 on the remote. To turn off the
demonstration, set the demonstration mode to off,
then press "/1 on the remote. When the
demonstration mode is set to off, the system saves
power in standby mode.
• If the system is at its factory default settings (ex. after
performing “COLD RESET” (page 89)), you can turn
off the demonstration simply by pressing "/1 on the
remote. Otherwise, to stop the demonstration, you
need to set “DEMO” to “DEMO OFF.”
25GB
For the other speakers
Installing the Speakers
and the IR transmitter on a
Wall
You can use the speakers by installing on the
wall.
Depending on the status of IR transmission (for
wireless system), you can install the IR
transmitter on the wall.
170 mm
(6 23/32 inches)
6 to 9 mm
(1/4 to 3/8 inch)
3
Installing the speakers on a
wall
1
Hang the speakers on the screws.
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
4 mm (5/32 inch)
30 mm (1 3/16 inches)
4.6 mm
(3/16 inch)
Hole on the back of
the speaker
10 mm
(13/32 inch)
2
Fasten the screws to the wall.
For the center speaker
265 mm
(10 7/16 inches)
6 to 9 mm
(1/4 to 3/8 inch)
26GB
Rear of speaker
Note
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
Installing the IR transmitter
on a wall
Hang the IR transmitter via the holes on the
bottom of the stand on the screws.
Make sure that the IR transmitter does not
move after installation.
Getting Started – ADVANCED –
You can hang the IR transmitter on a wall when:
– there is an obstruction between the IR
transmitter and IR receiver of the surround
speaker (L).
– people often pass between the IR transmitter
and IR receiver of the surround speaker (L).
3
IR transmitter
When hanging both the IR transmitter and
surround speaker (L), adjust the position of the
IR transmitter after deciding the position of the
surround speaker (L).
1
Rotate the stand of the IR transmitter.
Stand
IR transmitter
Tip
• You can store the cords in the troughs in the bottom
of the stand.
Stand
Stand
2
Install two commercially available screws in
the wall so that it protrudes 4 mm (3/16 inch).
Troughs
Install the screws 30 mm (1 3/16 inches) apart.
30 mm
(1 3/16 inches)
4 mm (3/16 inch)
Note
• Use screws suitable for the material and strength of
the wall.
• Do not install the IR transmitter to a wall of low
strength.
• Sony is not liable for any damage or accident incurred
by incorrect installation (i.e. wall of low strength,
etc.), incorrect use of this product, or natural disaster.
• When connecting/disconnecting the cord, detach the
IR transmitter from the wall first.
27GB
Connecting the TV (Advanced)
Sends the played back DVD image to the connected TV.
Check the jacks of your TV, and choose connection method A, B, or C. Picture quality improves in
order from A (standard) to C (HDMI).
C
TV with HDMI* IN jack
IN
To HDMI* OUT
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
SPEAKER
CENTER
AM
DMPORT
SAT /
CABLE
DIR-T1
WOOFER
DIGITAL IN
FM75
R AUDIO IN L
EURO AV
(DVD ONLY)
OUT
(DVD ONLY)
COAXIAL
Y
OPTICAL
SAT/CABLE
P B/C B
P R/C R
COMPONENT VIDEO OUT
OUTPUT(TO TV)
To COMPONENT
VIDEO OUT
B
To EURO AV
T OUTPUT
(TO TV)
A
Y
PB/CB
PR/CR
TV with COMPONENT
VIDEO IN jacks
TV with EURO AV INPUT jack
:Signal flow
* HDMI (high-definition multimedia interface)
The system incorporates High-Definition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
28GB
Note
• When you connect the system and TV with the HDMI cord and the SCART (EURO AV) cord simultaneously, the
TV may be set to SCART (EURO AV) input automatically. In this case, set to the desired input source on the TV,
or use a SCART (EURO AV) cord that has separate audio connectors.
A To connect to a TV with the SCART (EURO AV) cord (not supplied)
Be sure to connect the SCART (EURO AV) cord to the EURO AV T OUTPUT (TO TV) jack on the
unit.
When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB
signals. If the TV conforms to S video, change the input mode of the TV to RGB signals. Refer to the
operating instructions supplied with the TV to be connected.
B To connect to a TV with the COMPONENT VIDEO IN jacks
Connect a component video cord (not supplied). To use the COMPONENT VIDEO OUT jacks (Y, PB/
CB, PR/CR), your TV monitor must be equipped with via COMPONENT VIDEO IN jacks (Y,PB/CB,
PR/CR). If your TV accepts progressive format signals, you must use this connection and set the output
channel of the system to progressive format (page 30).
Getting Started – ADVANCED –
.
Green
Blue
Red
C To connect to a TV with the HDMI (high-definition multimedia
interface)/DVI (digital visual interface) IN jack
Use a certified HDMI (high-definition multimedia interface) cord (not supplied) to enjoy high quality
digital picture and sound through the HDMI OUT (high-definition multimedia interface out) jack.
To connect to a TV with DVI (digital visual interface) input
Use an HDMI (high-definition multimedia interface)-DVI (digital visual interface) converter cord (not
supplied) with an HDMI (high-definition multimedia interface)-DVI (digital visual interface) adaptor
(not supplied). The DVI (digital visual interface) jack will not accept any audio signals. Furthermore,
you cannot connect the HDMI OUT (high-definition multimedia interface out) jack to DVI (digital
visual interface) jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g.,
DVI (digital visual interface) jacks on the computer displays).
To select the type of video signal output from the HDMI OUT (highdefinition multimedia interface out) jack
When you connect the unit and the TV with the HDMI cord, selects the type of video signals output
from the HDMI OUT (high-definition multimedia interface out) jack.
For details, refer also to the operating instructions supplied with the TV/projector, etc.
1
Press FUNCTION +/– repeatedly to select “DVD.”
continued
29GB
2
Press VIDEO FORMAT.
The current type of video signals appears in the front panel display.
Each time you press VIDEO FORMAT, the display changes as follows:
t 720 × 480p*
r
1280 × 720p*
r
720 × 480p*
r
1920 × 1080i*
• “720 × 480p*”: Sends 720 × 480p video signals.**
• “1280 × 720p*”: Sends 1280 × 720p video signals.
• “1920 × 1080i*”: Sends 1920 × 1080i video signals.
*i: interlace, p: progressive
**Depending on the country, [720 × 576p] may appear.
Note
• When the HDMI indicator on the front panel lights up, images other than [720 × 480p] or [720 × 576p] are stretched
vertically.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 83.
Does your TV accept progressive signals?
Progressive is the method for displaying TV images which reduces flickering, and sharpens the image.
To display using this method, you need to connect to a TV that accepts progressive signals.
VIDEO
FORMAT
FUNCTION +/–
“PROGRE” lights up in the front panel display when the system outputs progressive signals.
1
30GB
Press FUNCTION +/– repeatedly to select “DVD.”
2
Press VIDEO FORMAT.
The current signal appears in the front panel display.
Each time you press VIDEO FORMAT, the display changes as follows:
t NORMAL (INTERLACE)
x NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (EURO AV
T OUTPUT (TO TV)).
x PROGRESSIVE
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions are not met.
Getting Started – ADVANCED –
r
PROGRESSIVE
Note
• When you connect the unit and the TV with the HDMI cord during the system is set to “NORMAL
(INTERLACE),” the system is set to “PROGRESSIVE” automatically.
Tip
• When you connect the unit and the TV with the HDMI cord, VIDEO FORMAT is used for selecting the type of
video signals output from the HDMI OUT jack. For details, see “To select the type of video signal output from the
HDMI OUT (high-definition multimedia interface out) jack” (page 29).
About DVD software types and the conversion method
DVD software can be divided into 2 types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at 30
frames/60 fields per second. Film-based software is derived from film and displays images at 24 frames
per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format, the
progressive signals need to be converted to match the type of DVD software that you are watching.
Note
• When you play video-based software in progressive signal format, sections of some types of images may appear
unnatural due to the conversion process when output through the COMPONENT VIDEO OUT jacks. Even though
you set to “PROGRESSIVE,” images from the EURO AV T OUTPUT (TO TV) jack are unaffected as they are
output in the interlace format.
• If you set [LINE] in [SCREEN SETUP] to [RGB] (page 84), the system switches to “INTERLACE.” This will
happen even though you select “PROGRESSIVE.”
• If you set [LINE] in [SCREEN SETUP] to [RGB] (page 84), the system outputs no component video signals.
31GB
Connecting Other Components
You can enjoy sound using the speakers of this system by connecting the AUDIO OUT jacks of another
component. For video connection of other components, connect directly to the TV.
DIGITAL MEDIA
PORT adapter
To DMPORT jack
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
CENTER
AM
DMPORT
SAT /
CABLE
DIR-T1
SPEAKER
WOOFER
DIGITAL IN
FM75
R AUDIO IN L
EURO AV
(DVD ONLY)
OUT
(DVD ONLY)
COAXIAL
OPTICAL
SAT/CABLE
Y
P B/C B
P R/C R
To SAT/CABLE
(DIGITAL IN OPTICAL) or
(DIGITAL IN COAXIAL)
COAXIAL
DIGITAL
OUT
or
OPTICAL
DIGITAL
OUT
OUTPUT(TO TV)
COMPONENT VIDEO OUT
To SAT/CABLE
(AUDIO IN)
AUDIO
OUT
L
R
VCR, digital satellite receiver
or PlayStation, etc.
:Signal flow
To connect the AUDIO OUT jacks of other components to the SAT/
CABLE (AUDIO IN) jacks of this unit
Connect the VCR or other components to the TV/VIDEO (AUDIO IN) jacks using the audio cord (not
supplied). When connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks
on the components.
White (L/audio)
Red (R/audio)
To connect the DIGITAL MEDIA PORT adapter
Connect a DIGITAL MEDIA PORT adapter (not supplied) to the DMPORT jack. For details of the
DIGITAL MEDIA PORT adapter, see “Using the DIGITAL MEDIA PORT Adapter” (page 72).
32GB
To listen to the portable audio source sound through the system
Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel
of the unit with the stereo mini-plug cord (not supplied).
If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL
or OPTICAL) jack
A digital satellite receiver can be connected to the SAT/CABLE (DIGITAL IN COAXIAL or
OPTICAL) jack instead of the SAT/CABLE (AUDIO IN) jacks of the unit.
To connect, use a digital coaxial cord (not supplied) for the DIGITAL IN COAXIAL jack or digital
optical cord (not supplied) for the DIGITAL IN OPTICAL jack.
The system can accept both digital and analog signals. Digital signals have priority over analog signals.
(COAXIAL has priority over OPTICAL.) If the digital signal ceases, the analog signal will be
processed after 2 seconds.
Getting Started – ADVANCED –
Tip
• When listening to MP3 format recordings using a portable audio source, you can enhance the sound.
Press FUNCTION +/– to select “AUDIO.” Connect the portable audio source. Press SOUND FIELD +/– repeatedly
until “A.F.D. STD” appears in the front panel display.
To cancel, select other than “A.F.D. STD.”
Digital coaxial cord
or
Digital optical cord
If you connect a digital satellite receiver without a DIGITAL OUT jack
Connect the digital satellite receiver to the SAT/CABLE (AUDIO IN) jacks only of the unit.
Note
• Be sure to make connections securely to avoid hum and noise.
• When you connect another component with a volume control, turn up the volume of the other components to a level
where sound is not distorted.
33GB
4
5
Basic Operations
Press A.
Load a disc.
Place one disc on the tray, and then press A.
Basic Operations
Playing Discs
Adjust the
volume
"/1
A
H FUNCTION
Note
Disc tray
Z
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
Connect
headphones
"/1
6
Press H.
The system starts playback (continuous
play).
Adjust the volume on the unit.
The volume level appears on the TV screen
and in the front panel display.
FUNCTION
+/–
Note
./>
/
X
H
x
• Depending on the system status, the volume level
may not appear on the TV screen.
• When you set the HDMI CONTROL function to on
(page 85), the TV that is connected to the system with
the HDMI cord can be synch-operated with the
system. For details, see the HDMI CONTROL Guide
(supplied separately).
MUTING
VOLUME
+/–
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
1
2
3
Turn on your TV.
Switch the input selector on the TV to
this system.
Press "/1.
The system turns on.
Unless the system is set to “DVD,” press
FUNCTION +/– to select “DVD.”
34GB
Tip
• When you connect the system and TV with the HDMI
cord, you can operate them simply, using the HDMI
CONTROL function. For details, see the HDMI
CONTROL Guide (supplied separately).
To save the power in standby
mode
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Additional operations
Press
Stop
x
Pause
X
Resume play after pause
X or H
Go to the next chapter,
track, or scene
> (except for JPEG)
Go back to the preceding
chapter, track, or scene
. (except for JPEG)
Turn off the sound
temporarily
MUTING. To cancel,
press it again or
VOLUME + to adjust
the sound volume.
Stop play and remove the
disc
Z on the remote or A
on the unit.
Replay the previous scene*
(instant replay)
during playback.
Briefly fast forward the
current scene**
(instant advance)
during playback.
* DVD VIDEOs/DVD-RWs/DVD-Rs only. The
button can be used except for DivX video files.
** DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/
DVD+Rs only. The button can be used except for
DivX video files.
Note
• You may not be able to use the instant replay or
instant advance function with some scenes.
FUNCTION
+/–
X/x/c,
SYSTEM
MENU
Selecting the connected
component
You can use a VCR or other components
connected to the SAT/CABLE jacks on the rear
panel. Refer to the operating instructions
supplied with the components for further
information.
Press FUNCTION +/– repeatedly until “SAT/
CABLE” appears in the front panel display.
Each time you press FUNCTION +/–, the mode
of the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
SAT/CABLE t TV t DMPORT t AUDIO
t…
Note
• When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN) jack (digital
connection) at the same time, the digital connection
takes priority.
continued
35GB
Basic Operations
To
Enjoying the Radio or
Other Components
Basic Operations
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a
component connected to the SAT/CABLE or the
EURO AV T OUTPUT (TO TV) jacks on the
rear panel or to the AUDIO IN jack on the front
panel. This is not a malfunction and will depend
on the component connected.
To prevent this, you can change the input level
from the sound of the other components.
1
2
3
4
Enjoying TV or VCR Sound
from All Speakers
You can enjoy TV or VCR sound from all the
speakers in this system.
For details, see “Step 2: Connecting the System
and TV” (page 16), “Connecting the TV
(Advanced)” (page 28), and “Connecting Other
Components” (page 32).
Press FUNCTION +/– repeatedly until
“SAT/CABLE,” “TV,” or “AUDIO”
appears in the front panel display.
FUNCTION
+/–
Press SYSTEM MENU.
Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “ATT ON”: attenuates the input level.
The output level is changed.
• “ATT OFF”: normal input level.
5
Press
.
The setting is made.
6
SOUND
FIELD+/–
1
Press SYSTEM MENU.
The system menu turns off.
2
Press FUNCTION +/– repeatedly until
“SAT/CABLE” or “TV” appears in the
front panel display.
Press SOUND FIELD +/– repeatedly
until the sound field you want appears
in the front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
6 speakers, select the “PRO LOGIC,” “PLII
MOVIE,” or “PLII MUSIC” sound field.
For details of sound field, see page 38.
Note
• When you set the [HDMI CONTROL] setting in
[CUSTOM SETUP] to [ON] (page 85), the System
Audio Control function is activated and no sound
may be output from the TV. For details of the System
Audio Control function, see the HDMI CONTROL
Guide (supplied separately).
• When you use both the SAT/CABLE (AUDIO IN)
jacks (analog connection) and SAT/CABLE
(COAXIAL or OPTICAL DIGITAL IN) jack (digital
connection) at the same time, the digital connection
takes priority.
36GB
Selecting the Movie or
Music Mode
You can choose a suitable sound mode for
movies or music.
Basic Operations
MOVIE/
MUSIC
Press MOVIE/MUSIC during playback.
Press MOVIE/MUSIC repeatedly until the
mode you want lights up in the front panel
display. The default setting is underlined.
• AUTO: selects the mode automatically to
produce the sound effect depending on the disc
or sound stream.
• MOVIE: provides the sound for movies.
• MUSIC: provides the sound for music.
Tip
• When the movie or music mode is selected,
“MOVIE” or “MUSIC” is displayed in the front panel
display. When neither “MOVIE” or “MUSIC” is
displayed in the front panel display, “AUTO” is
selected.
Note
• Depending on the disc or source, when you select
“AUTO,” the beginning of the sound may be cut off
as the optimum mode is automatically selected. To
avoid cutting the sound, select “MOVIE” or
“MUSIC.”
37GB
Sound Adjustments
Enjoying Surround Sound
by Using Sound Field
You can take advantage of surround sound
simply by selecting one of the system’s preprogrammed sound fields. They bring exciting
and powerful sound of movie theaters into your
home.
Sound field
Display
HEADPHONE
2 CHANNEL STEREO
HP 2CH
* Use DCS Technology
Automatic outputting of the
original sound
x AUTO FORMAT DIRECT STANDARD
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
effects (e.g. reverberation).
However, if there are no low frequency signals
(Dolby Digital LFE, etc.), it will generate a low
frequency signal for output to the subwoofer.
Outputting the sound from
multiple speakers
x AUTO FORMAT DIRECT MULTI
SOUND
FIELD+/–
Press SOUND FIELD +/–.
Press SOUND FIELD +/– repeatedly until the
sound field you want appears in the front panel
display.
This mode lets you enjoy audio playback of all
types of discs from multiple speakers.
Note
• The sound is not output from multiple speakers
depending on the source.
• Depending on the disc or source, the beginning of the
sound may be cut off as the optimum mode is
automatically selected. To avoid cutting the sound,
select “A.F.D. STD.”
All sound field
38GB
Sound field
Display
AUTO FORMAT DIRECT
STANDARD
A.F.D. STD
AUTO FORMAT DIRECT
MULTI
A.F.D. MULTI
Outputting 2 channel sources
like CDs by 5.1channel
x Dolby Pro Logic
Dolby Pro Logic
PRO LOGIC
Dolby Pro Logic II MOVIE
PLII MOVIE
Dolby Pro Logic II MUSIC
PLII MUSIC
CINEMA STUDIO EX A
C. ST. EX A*
CINEMA STUDIO EX B
C. ST. EX B*
CINEMA STUDIO EX C
C. ST. EX C*
2 CHANNEL STEREO
2CH STEREO
HEADPHONE THEATER
HP THEATER*
Dolby Pro Logic produces five output channels
from 2 channel sources. This mode performs Pro
Logic decoding to the input signal and output to
front, center, and surround speakers.
Meanwhile, the surround channel becomes
monaural.
x Dolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II produces five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
Note
Enjoying Digital Cinema
Sound
About DCS (Digital Cinema
Sound)
In collaboration with Sony Pictures
Entertainment, Sony measured the sound
environment of their studios and integrated the
data of the measurement and Sony’s own DSP
(Digital Signal Processor) technology to
develop “Digital Cinema Sound.” “Digital
Cinema Sound” simulates in a home theater an
ideal movie theater sound environment based on
the preference of the movie director.
x CINEMA STUDIO EX A (Cinema Studio
EX A)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Cary Grant
Theater” cinema production studio. This is a
standard mode, great for watching most any type
of movie.
x CINEMA STUDIO EX B (Cinema Studio
EX B)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Kim Novak
Theater” cinema production studio. This mode
is ideal for watching science-fiction or action
movies with lots of sound effects.
Reproduces the sound characteristics of the
Sony Pictures Entertainment scoring stage. This
mode is ideal for watching musicals or classic
films where music is featured in the soundtrack.
About Cinema Studio EX
Cinema Studio EX is ideal for enjoying movie
software encoded with multi channel format,
such as the Dolby Digital DVD. This mode
reproduces the sound characteristics of Sony
Pictures Entertainment’s studios.
Cinema Studio EX consists of the following
three elements.
• Virtual Multi Dimension
Creates five sets of virtual speakers
surrounding the listener from a single pair of
actual surround speakers.
• Screen Depth Matching
In a movie theater, sound seems to come from
inside the image reflected on the movie screen.
This element creates the same sensation in
your listening room by shifting the sound of
the front speakers “into” the screen.
• Cinema Studio Reverberation
Reproduces the reverberations peculiar to a
movie theater. Cinema Studio EX is the
integrated mode which operates these
elements simultaneously.
Sound Adjustments
• When the input signal is multi channel source, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are canceled and the multi channel source is output
directly.
• When the bilingual broadcast sound is input, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are not effective.
x CINEMA STUDIO EX C (Cinema Studio
EX C)
Note
• The virtual speaker effect may cause increased noise
in the playback signal.
• When listening with sound fields that employ virtual
speakers, you will not be able to hear any sound
coming directly from the surround speakers.
Using only the front speaker
and subwoofer
x 2 CHANNEL STEREO
This mode outputs the sound from the front left
and right speakers and subwoofer. Standard 2
channel (stereo) sources completely bypass the
sound field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front left and right speakers and subwoofer.
continued
39GB
Enjoying the surround sound
by headphones
x HEADPHONE THEATER
This mode outputs the sound as surround from
headphone L/R.
This function is based on “Digital Cinema
Sound” technology.
x HEADPHONE 2 CHANNEL STEREO
This mode outputs the sound from headphone L/
R. Standard 2 channel (stereo) sources
completely bypass the sound field processing.
Multi channel surround formats are downmixed
to two channels.
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
You can enjoy multiplex broadcast sound when
the system receive or play the Dolby Digital
multiplex broadcast signal.
Note
• To receive the Dolby Digital signal, you need to
connect a digital satellite tuner to the unit with an
optical or coaxial digital cord (page 32) and set the
digital output mode of the digital satellite tuner to
Dolby Digital.
To turn the surround effect off
Press SOUND FIELD +/– repeatedly until
“A.F.D. STD” or “2CH STEREO” appears in
the front panel display.
Tip
• The system memorizes the last sound field selected
for each function mode.
Whenever you select a function such as DVD or
TUNER, the sound field that was last applied to
function is automatically applied again. For example,
if you listen to DVD with PRO LOGIC as the sound
field, then change to another function, and then return
to DVD, PRO LOGIC will be applied again.
AUDIO
Press AUDIO.
Press AUDIO repeatedly until the signal you
want appears in the front panel display.
The default setting is underlined.
• “MAIN”: Sound of the main language will be
output.
• “SUB”: Sound of the sub language will be
output.
• “MAIN+SUB”: Mixed sound of both the main
and sub languages will be output.
40GB
With each press, playback speed becomes faster.
Various Functions for Playing Discs
Searching for a Particular
Point on a Disc
(Scan, Slow-motion Play, Freeze
Frame)
Note
• Depending on the DVD/DivX video/VIDEO CD, you
may not be able to do some of the operations
described.
Locating a point quickly by
playing a disc in fast forward
or fast reverse (Scan)
(Except for JPEG)
Press /m or M/ while playing a disc.
When you find the point you want, press H to
return to normal speed. Each time you press /
m or M/ during scan, the playback speed
changes. With each press the indication changes
as shown below. Actual speeds may differ with
some discs.
Playback direction
(DVD VIDEO, DVD-R, DVD-RW, DivX
video, VIDEO CD only)
Press /m or M/ when the system is in
pause mode. To return to normal playback
speed, press H. Each time you press /m or
M/ during Slow-motion Play, the playback
speed changes. Two speeds are available. With
each press the indication changes as follows:
Playback direction
2
y1
Opposite direction (DVD VIDEO only)
2
y1
Playing one frame at a time
(Freeze Frame)
(DVD VIDEO, DVD-R, DVD-RW, DivX
video, VIDEO CD only)
When the system is in the pause mode, press
to go to the next frame. Press
to go to
the preceding frame (DVD VIDEO/DVD-R/
DVD-RW only). To return to normal playback,
press H.
Various Functions for Playing Discs
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
Watching frame by frame
(Slow-motion Play)
Note
• You cannot search for a still picture on a DVD-R/
DVD-RW in VR mode.
• For DATA CDs/DATA DVDs, this function works
only for DivX video files.
×2B t 1M t 2M t 3M
3M (DVD VIDEO/DVD-VR mode/DivX video/
VIDEO CD only)
×2B (DVD VIDEO/CD only)
Opposite direction
×2b t 1m t 2m t 3m
3m (DVD VIDEO/DVD-VR mode/DivX video/
VIDEO CD only)
×2b (DVD VIDEO only)
41GB
Searching for a Title/
Chapter/Track/Scene,
etc.
You can search a DVD by title or chapter, and
you can search a VIDEO CD/CD/DATA CD/
DATA DVD by track, index, or scene. As titles
and tracks are assigned unique numbers on the
disc, you can select the desired one by entering
its number. Or, you can search for a scene using
the time code.
1
Press
DISPLAY. (When playing a
DATA CD/DATA DVD with JPEG image
files, press
DISPLAY twice.)
The Control Menu display appears.
2
3
Press
[** (**)] changes to [– – (**)].
12(27)
(34)
T
1:32:55
4
[TITLE], [TRACK], [SCENE]
[CHAPTER], [INDEX]
If you make a mistake
Cancel the number by pressing CLEAR,
then select another number.
5
Press
To search for a scene using the
time code (DVD VIDEO and
DVD-VR mode only)
1
In Step 2, select
[TIME/TEXT].
[T **:**:**] (playing time of the current title)
is selected.
2
[TRACK]
Press
.
[T **:**:**] changes to [T --:--:--].
3
[ALBUM]
[FILE]
Example: when you select
[CHAPTER]
[** (**)] is selected (** refers to a number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, scenes, albums or files.
12(27)
18(34)
T
1:32:55
.
The system starts playback from the
selected number.
[TIME/TEXT]
Select [TIME/TEXT] to search for a
starting point by inputting the time code.
DVD VIDEO
Press X/x or the number buttons to
select the title, chapter, track, index,
scene, etc., number you want to search
for.
Press X/x to select the search method.
The display will show different items
depending on the disc.
.
DVD VIDEO
Input the time code using the number
buttons, then press
.
For example, to find the scene at 2 hours, 10
minutes, and 20 seconds after the beginning,
just enter [2:10:20].
Tip
• When the Control Menu display is turned off, you can
search for a chapter (DVD VIDEO/DVD-R/DVDRW), track (VIDEO CD/CD), or file (DATA CD/
DATA DVD (DivX video)) by pressing the number
buttons and
.
Note
• You cannot search for a scene on a DVD+RW using
the time code.
Selected row
42GB
Searching by Scene
(Picture Navigation)
You can divide the TV screen into 9 subscreens
and find the desired scene quickly.
1
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
Press PICTURE NAVI during playback.
The following display appears.
CHAPTER VIEWER
Press PICTURE NAVI repeatedly to
select an item.
When you stop the disc, the system remembers
the point where you pressed x and “RESUME”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing "/1.
1
• [TITLE VIEWER] (DVD VIDEO only)
• [CHAPTER VIEWER] (DVD VIDEO
only)
• [TRACK VIEWER] (VIDEO CD/
Super VCD only)
3
Press
“RESUME” appears in the front panel
display.
If “RESUME” does not appear, Resume
Play is not available.
2
.
While playing a disc, press x to stop
playback.
Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
The first scene of each title, chapter, or
track appears as follows.
Note
4
1
2
3
4
5
6
7
8
9
Press C/X/x/c to select a title, chapter,
or track, and press
.
The system starts playback from the
selected scene.
To return to normal play during
setting
Press O RETURN.
Note
• Depending on the disc, you may not be able to select
some items.
Various Functions for Playing Discs
2
ENTER
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when:
– you eject the disc.
– the system enters standby mode (DATA CD/
DATA DVD only).
– you change or reset the settings on the Setup
Display.
– you change the parental control level.
– you change the function by pressing FUNCTION
+/–.
– you disconnect the AC power cord (mains lead).
• For DVD-Rs/DVD-RWs in VR mode, VIDEO CDs,
CDs, DATA CDs, and DATA DVDs, the system
remembers the resume playback point for the current
disc.
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work properly with some
discs.
continued
43GB
Tip
• To play from the beginning of the disc, press x twice,
then press H.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped
the disc for up to 40 discs and resumes playback
the next time you insert the same disc. If you
store a resume playback point for the 41st disc,
the resume playback point for the first disc is
deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)” (page 85).
Creating Your Own
Program
(Program Play)
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
1
DISPLAY.
The Control Menu display appears.
2
Press X/x to select
[PROGRAM], then press
.
The options for [PROGRAM] appear.
Tip
T
• To play from the beginning of the disc, press x twice,
then press H.
6 (14)
2:50
PLAY
CD
OFF
OFF
SET
ON
Note
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 85), the resume point is cleared
when you change the function by pressing
FUNCTION +/–.
Press
3
Press X/x to select [SET
press
.
t], then
[TRACK] is displayed when you play a
VIDEO CD or CD.
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
Tracks recorded
on a disc
44GB
0:00:00
T
––
01
02
03
04
05
06
Total time of the
programmed tracks
4
Press c.
To change or cancel a program
The cursor moves to the track row [T] (in
this case, [01]).
1
Follow steps 1 to 3 of “Creating Your Own
Program.”
2
Select the program number of the track you
want to change or cancel using X/x.
PROGRAM
ALL CLEAR
1. TRACK – –
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
5
0:00:00
T
––
01
02
03
04
05
06
Select the track you want to program.
Selected track
0:15:30
T
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
02
––
––
––
––
––
––
––
01
02
03
04
05
06
Total time of the programmed tracks
6
3
Follow Step 5 for new programming.
To cancel a program, select [--] under [T],
then press
.
To cancel all of the tracks in the
programmed order
1
Follow steps 1 to 3 of “Creating Your Own
Program.”
2
3
Press X and select [ALL CLEAR].
Press
.
Various Functions for Playing Discs
For example, select track [02].
Press X/x to select [02] under [T], then
press .
If you want to delete the track from the
program, press CLEAR.
To program other tracks, repeat steps 4
to 5.
The programmed tracks are displayed in the
selected order.
7
Press H to start Program Play.
Program Play starts.
When the program ends, you can restart the
same program again by pressing H.
To return to normal play
In Step 3, press CLEAR or select [OFF]. To play
the same program again, select [ON] in Step 3
and press .
To turn off the Control Menu
display
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
45GB
Playing in Random Order
To turn off the Control Menu
display
(Shuffle Play)
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
You can have the system “shuffle” tracks.
Subsequent “shuffling” may produce a different
playing order.
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
Note
Note
• Same song may be played repeatedly during MP3
playback.
1
Press
DISPLAY during playback.
The Control Menu display appears.
2
Press X/x to select
then press
.
[SHUFFLE],
The options for [SHUFFLE] appear.
T
6 (14)
2:50
PLAY
CD
OFF
OFF
TRACK
3
Press X/x to select the item to be
shuffled.
x When playing a VIDEO CD or CD
• [TRACK]: shuffles tracks on the disc.
x When Program Play is activated
• [ON]: shuffles tracks selected in Program
Play.
x When playing a DATA CD (except for
DivX) or DATA DVD (except for DivX)
• [ON (MP3)]: shuffles MP3 audio tracks in
the album on the current disc. When no
album is selected, the first album will play
in random order.
Note
• A track already played is also selected in
random order.
4
Press
.
Shuffle Play starts.
To return to normal play
In Step 3, press CLEAR or select [OFF].
46GB
x When playing a DATA CD or DATA
DVD
Playing Repeatedly
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the albums on the
disc.
• [ALBUM]: repeats the current album.
• [TRACK] (MP3 audio tracks only):
repeats the current track.
• [FILE] (DivX video files only): repeats
the current file.
(Repeat Play)
You can play all the titles, tracks or albums on a
disc or a single title, chapter, track, or album
repeatedly.
You can use a combination of Shuffle or
Program Play modes.
Press
Press X/x to select
then press
.
[REPEAT],
The options for [REPEAT] appear.
T
.
The item is selected.
DISPLAY during playback.
The Control Menu display appears.
2
Press
6 (14)
2:50
PLAY
CD
To return to normal play
In Step 3, press CLEAR or select [OFF].
To turn off the Control Menu
display
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
Note
OFF
OFF
DISC
TRACK
3
Press X/x to select the item to be
repeated.
The default setting is underlined.
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
• When playing a DATA CD/DATA DVD which
contains MP3 audio track and JPEG image files, and
their playing time is not the same, the audio sound
will not match the image.
• When [MODE (MP3, JPEG)] is set to [IMAGE
(JPEG)] (page 59), you cannot select [TRACK].
Various Functions for Playing Discs
1
4
x When playing a DVD VIDEO or DVDVR
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the titles on the disc.
• [TITLE]: repeats the current title on a
disc.
• [CHAPTER]: repeats the current chapter.
x When playing a VIDEO CD or CD
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the tracks on the
disc.
• [TRACK]: repeats the current track.
47GB
Using the DVD’s Menu
A DVD is divided into a lot of sections, which
make up a picture or music feature. These
sections are called “titles.” When you play a
DVD which contains several titles, you can
select the title you want using DVD TOP
MENU.
When you play DVDs that allow you to select
items such as the language for the subtitles and
the language for the sound, select these items
using DVD MENU.
1
Press DVD TOP MENU or DVD MENU.
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to
disc.
2
3
Changing the Sound
When playing a DVD VIDEO or DATA CD/
DATA DVD (DivX video files) recorded in
multiple audio formats (PCM, Dolby Digital,
MPEG audio, or DTS), you can change the
audio format. If the DVD VIDEO is recorded
with multilingual tracks, you can also change the
language.
With VIDEO CDs, CDs, DATA CDs, or DATA
DVDs, you can select the sound from the right or
left channel and listen to the sound of the
selected channel through both the right and left
speakers.
1
The following display appears.
Press C/X/x/c or the number buttons to
select the item you want to play or
change.
Press
Press AUDIO during playback.
1:ENGLISH DOLBY DIGITAL 3/2.1
.
2
Press AUDIO repeatedly to select the
desired audio signal.
x When playing a DVD VIDEO
Depending on the DVD VIDEO, the choice
of language varies.
When four digits are displayed, they
indicate a language code. Refer to
“Language Code List” (page 102) to see
which language the code represents. When
the same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio formats.
x When playing a DVD-VR
The types of sound tracks recorded on a disc
are displayed. The default setting is
underlined.
Example:
• [1: MAIN] (main sound)
• [1: SUB] (sub sound)
• [1: MAIN+SUB] (main and sub sound)
• [2: MAIN]
• [2: SUB]
48GB
• [2: MAIN+SUB]
Note
• [2: MAIN], [2: SUB], and [2: MAIN+SUB] do
not appear when one audio stream is recorded on
the disc.
x When playing a VIDEO CD, CD, DATA
CD (MP3 audio), or DATA DVD (MP3
audio)
(DVD, DivX video only)
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x When playing a DVD
Example:
Dolby Digital 5.1 ch
LFE (Low
Frequency Effect)
Surround (L/R)
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
The choice of DATA CD or DATA DVD
audio signal formats differ, depending on
the DivX video file contained on the disc.
The format is shown in the display.
1:ENGLISH DOLBY DIGITAL 3 / 2 .1
R
RS
Currently playing
program format
Example:
Dolby Digital 3 ch
Surround
(Monaural)
Front (L/R)
2:SPANISH DOLBY DIGITAL 2 / 1
L
R
S
Currently playing
program format
Note
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
C
LFE
LS
x When playing a Super VCD
The default setting is underlined.
• [1:STEREO]: the stereo sound of the
audio track 1
• [1:1/L]: the sound of the left channel of
the audio track 1 (monaural)
• [1:2/R]: the sound of the right channel of
the audio track 1 (monaural)
• [2:STEREO]: the stereo sound of the
audio track 2
• [2:1/L]: the sound of the left channel of
the audio track 2 (monaural)
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
L
Front (L/R) +
Center
Various Functions for Playing Discs
The default setting is underlined.
• [STEREO]: the standard stereo sound
• [1/L]: the sound of the left channel
(monaural)
• [2/R]: the sound of the right channel
(monaural)
Checking the audio signal
format
x When playing a DATA CD (DivX video) or
DATA DVD (DivX video)
Example:
MP3 audio
1: MP3 128k
Bit rate
continued
49GB
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below. Each
channel is output from a separate speaker.
• Front (L)
• Front (R)
• Center
• Surround (L)
• Surround (R)
• Surround (Monaural): This signal can be either
the Dolby Surround Sound processed signals
or the Dolby Digital sound’s monaural
Surround audio signals.
• LFE (Low Frequency Effect) signal
Selecting [ORIGINAL] or
[PLAY LIST] on a DVD-R/
DVD-RW
Some DVD-Rs/DVD-RWs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
([ORIGINAL]) and titles that can be created on
recordable DVD players for editing ([PLAY
LIST]). You can select the type of title to be
played.
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
PLAY LIST], then press
[ORIGINAL/
.
The options for [ORIGINAL/PLAY LIST]
appear.
1 (44)
3 ( 28)
T
1:30:50
DVD-VR
PLAY LIST
PLAY LIST
ORIGINAL
3
Press X/x to select a setting.
The default setting is underlined.
• [PLAY LIST]: plays the titles created
from [ORIGINAL] for editing.
• [ORIGINAL]: plays the titles originally
recorded.
4
50GB
Press
.
Viewing Information About
the Disc
When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
1 Playing time and current track number
2 Track (file) name
Tip
• When playing VIDEO CDs with PBC functions, the
playing time is displayed.
Viewing the playing time and
remaining time in the front
panel display
Press DISPLAY.
Each time you press DISPLAY while playing
the disc, the display changes 1 t 2 t ...
t 1 t ...
Some displayed items may disappear after a few
seconds.
When playing a DVD VIDEO or
DVD-R/DVD-RW
1 Playing time and number of the current title
2 Remaining time of the current title
3 Playing time and number of the current
chapter
4 Remaining time of the current chapter
5 Disc name
6 Title and chapter
When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
1 Playing time of the current file
2 Current file name
3 Current album and file number
When playing a VIDEO CD
(without PBC functions) or CD
1 Playing time of the current track
2 Remaining time of the current track
3 Playing time of the disc
4 Remaining time of the disc
5 Disc name
6 Track and index*
* VIDEO CD only.
Checking the playing time and
remaining time
You can check the playing time and remaining
time of the current title, chapter, or track, and the
total playing time or remaining time of the disc.
You can also check the DVD text and MP3
folder name/file name recorded in the disc.
1
Press DISPLAY during playback.
The following display appears.
Various Functions for Playing Discs
You can check disc information, such as the
remaining time, total number of titles in a DVD,
tracks in a VIDEO CD, CD, MP3, or file name
of a DivX video using the front panel display
(page 105).
Note
• The system can only display the first level of the
DVD/CD text, such as the disc name or title.
• If an MP3 file name cannot be displayed, “*” will
appear in the front panel display instead.
• The disc name or track name may not be displayed
depending on the text.
• Playing time of MP3 audio tracks and DivX video
files may not be displayed correctly.
T 1:01:57
Time information
2
Press DISPLAY repeatedly to change
the time information.
The display and the kinds of time that you
can check depend on the disc you are
playing.
x When playing a DVD VIDEO or DVDRW
• T **:**:**
Playing time of the current title
• T–**:**:**
Remaining time of the current title
• C **:**:**
Playing time of the current chapter
• C–**:**:**
Remaining time of the current chapter
continued
51GB
x When playing a VIDEO CD (with PBC
functions)
• **:**
Playing time of the current scene
x When playing a VIDEO CD (without
PBC functions) or CD
• T **:**
Playing time of the current track
• T–**:**
Remaining time of the current track
• D **:**
Playing time of the current disc
• D–**:**
Remaining time of the current disc
Checking the play information
of the disc
To check DVD/CD text
Press DISPLAY repeatedly in Step 2 to display
text recorded in the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the text.
If the disc does not contain text, “NO TEXT”
appears.
BRAHMS SYMPHONY
x When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
• T **:**
Playing time of the current track
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
• **:**:**
Playing time of the current file
Note
• Characters/marks may not be displayed for some
languages.
• Depending on the type of disc being played, the
system can only display a limited number of
characters. Also, depending on the disc, not all text
characters will be displayed.
To check DATA CD/DATA DVD
(MP3 audio/DivX video) text
By pressing DISPLAY while playing MP3
audio tracks or DivX video files on a DATA
CD/DATA DVD, you can display the name of
the album/track/file, and the audio bit rate (the
amount of data per second of the current audio)
on your TV screen.
Bit rate*
T 17:30
128k
JAZZ
RIVER SIDE
Album name
Track/file name
* Appears when:
– playing an MP3 audio track on DATA CDs/DATA
DVDs.
– playing a DivX video file that contains MP3 audio
signals on DATA CDs/DATA DVDs.
52GB
Checking the date
information
Changing the Angles
(JPEG only)
You can check the date information during
playback when the Exif* tag is recorded in the
JPEG image data.
Press
DISPLAY twice during playback.
The Control Menu display appears.
1(8)
1(20)
If various angles (multi-angles) for a scene are
recorded on a DVD VIDEO, you can change the
viewing angle.
Press ANGLE during playback.
Each time you press ANGLE, the angle changes.
Note
DATA CD JPEG
31/ 01/ 2007
* “Exchangeable Image File Format” is a digital
camera image format defined by the Japan
Electronics and Information Technology Industries
Association (JEITA).
Tip
• Date information is [DD/MM/YYYY].
DD: Day
MM: Month
YYYY: Year
Various Functions for Playing Discs
Date information
• Depending on the DVD VIDEO, you may not be able
to change the angle even if multi-angles are recorded
on the DVD VIDEO.
53GB
Displaying the Subtitles
If subtitles are recorded on a disc, you can turn
the subtitles on or off while playing. If
multilingual subtitles are recorded on the disc,
you can change the subtitle language while
playing, or turn the subtitles on or off whenever
you want.
Press SUBTITLE during playback.
Each time you press SUBTITLE, the subtitle
language changes.
Note
• Depending on the DVD VIDEO, you may not be able
to change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
them off.
• You can change the subtitles if the DivX video file
has an “.AVI” or “.DIVX” extension and contains
subtitle information within the same file.
Adjusting the Delay
Between the Picture and
Sound
(A/V SYNC)
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
1
Press
DISPLAY.
The Control Menu display appears.
2
Press X/x to select
then press
.
[A/V SYNC],
The options for [A/V SYNC] appear.
1(12)
1(28)
T
0:00:02
DVD VIDEO
OFF
OFF
ON
3
Press X/x to select a setting.
The default setting is underlined.
• [OFF]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
4
Press
.
Note
• Depending on the input stream, this function may not
be effective.
54GB
About MP3 Audio Tracks
and JPEG Image Files
What is MP3/JPEG?
MP3 is audio compression technology that
satisfies the ISO/MPEG regulations. JPEG is
image compression technology.
You can play back DATA CDs (CD-ROMs/CDRs/CD-RWs) or DATA DVDs (DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs/DVD-ROMs)
recorded in MP3 (MPEG1 Audio Layer 3) or
JPEG format. However, the DATA CDs must be
recorded according to ISO 9660 Level 1, Level
2 or Joliet format and DATA DVDs of Universal
Disk Format (UDF) for the system to recognize
the tracks (or files). You can also play discs
recorded in Multi Session.
See the operating instructions supplied with the
CD-R/CD-RW or DVD-R/DVD-RW drives and
the recording software (not supplied) for details
on the recording format.
You can play the MP3 audio tracks or JPEG
image files:
• which have the extension “.MP3” (MP3 audio
track) or “.JPG”/“.JPEG” (JPEG image file)
• which conform to the DCF* image file format
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by Japan
Electronics and Information Technology Industries
Association (JEITA).
Note
• The system will play any data with the
extension “.MP3,” “.JPG,” or “.JPEG” even if
they are not in MP3 or JPEG format. Playing
this data may generate a loud noise which
could damage your speaker system.
• The system does not conform to audio in
MP3PRO format.
Various Functions for Playing Discs
Discs that the system can
play
MP3 audio track or JPEG
image file that the system can
play
About the Multi-Session disc
If MP3 audio tracks or JPEG image files are
recorded in the first session, the system will also
play MP3 audio tracks or JPEG image files in
other sessions. If audio tracks and images in
audio CD format or video CD format are
recorded in the first session, only the first
session will be played back.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
continued
55GB
Playback order of MP3 audio
tracks or JPEG image files
The playback order of MP3 audio tracks or
JPEG image files recorded on a DATA CD or
DATA DVD is as follows:
Tip
• If you add numbers (01, 02, 03, etc.) to the front of the
track (or file) names when you store the tracks (or
files) in a disc, the tracks (or files) will be played in
that order.
• A disc with many trees takes longer to start playback.
Note
x Structure of disc contents
Tree 1
Album
Tree 2
Tree 3
Tree 4
Tree 5
Track (MP3 audio) or
File (JPEG image)
When you insert a DATA CD or DATA DVD
and press H, the numbered tracks (or files) are
played sequentially, from 1 through 7. Any
sub-albums/tracks (or files) contained within a
currently selected album take priority over the
next album in the same tree. (Example: C
contains D so 4 is played before 5.)
When you press DVD MENU and the list of
album names appears (page 57), the album
names are arranged in the following order:
A t B t C t D t F t G. Albums
that do not contain tracks (or files) (such as
album E) do not appear in the list.
56GB
• Playback order may differ from the illustration
depending on the software you use to create the
DATA CD or DATA DVD, or if there are more than
200 albums and 300 files in each album.
• The system can recognize up to 200 albums, and will
not play any albums beyond the 200th.
• The system may take longer time to playback, when
progressing to the following album or jump to other
album.
• Some type of JPEG files cannot be played.
Playing DATA CDs or
DATA DVDs with MP3
Audio Tracks and JPEG
Image Files
Selecting an MP3 audio track
or album
Load a DATA CD or DATA DVD.
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
3( 30)
ROCK BEST HIT
KARAOKE
MY FAVOURITE SONG
R&B
JAZZ
CLASSIC
SALSA OF CUBA
BOSSA NOVA
2
Press x.
To play the next or previous MP3
audio track
Press ./>. Note that you can select the
next album by continuing to press > after the
last track on the current album, but that you
cannot return to the previous album by pressing
.. To return to the previous album, select the
album from the album list.
To return to the previous display
Press O RETURN.
To turn off the display
Press DVD MENU.
Selecting a JPEG image file or
album
1
Load a DATA CD or DATA DVD.
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
3( 30)
Press X/x to select an album.
x When selecting an album
Press H to start playing the selected
album.
x When selecting a track
Various Functions for Playing Discs
1
To stop playback
ROCK BEST HIT
KARAOKE
MY FAVOURITE SONG
R&B
JAZZ
CLASSIC
SALSA OF CUBA
BOSSA NOVA
Press
.
The list of tracks contained in the album
appears.
MY FAVOURITE SONG
1(256)
WALTZ FOR DEBBY
MY ROMANCE
MILES TONES
MY FUNNY VALENTINE
AUTUMN LEAVES
ALL BLUES
S O M E D A Y M Y P R I N C E W ...
Press X/x to select a track and press
.
The selected track starts playing. You can
turn the track list off by pressing DVD
MENU. Pressing DVD MENU again will
display the album list.
continued
57GB
2
Press X/x to select an album.
To rotate a JPEG image
x When selecting an album
When a JPEG image file is displayed on the TV
screen, you can rotate the image by 90 degrees.
Press X/x while viewing an image. Each time
you press X, the image rotates counterclockwise
by 90 degrees.
Example of when you press X once:
Press H to start playing the selected
album.
x When selecting an image
Press PICTURE NAVI.
Images of files in the album appear in 16
subscreens.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Press C/X/x/c to select the image you want
to view and press
.
Rotating direction
Press CLEAR to return to normal view.
To stop playback
Press x.
Tip
• A scroll box is displayed at the right side of the TV
screen. To display the additional image files, select
the bottom image and press x. To return to the
previous image, select the top image and press X.
To play the next or previous JPEG
image file
Press C/c when the Control Menu display is not
displayed. Note that you can select the next
album by continuing to press c after the last
image on the current album, but that you cannot
return to the previous album by pressing C. To
return to the previous album, select the album
from the album list.
58GB
Playing Audio Tracks and
Images as a Slide Show
with Sound
You can play a slide show with sound by first
placing both MP3 and JPEG files in the same
album on a DATA CD or DATA DVD. When
you play back the DATA CD or DATA DVD,
select [AUTO] mode as explained below.
Load a DATA CD or DATA DVD.
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
Press X/x to select
(MP3, JPEG)], then press
[MODE
.
The options for [MODE (MP3, JPEG)]
appear.
12(27)
18(34)
T
1:32:55
Press X/x to select a setting.
The default setting is underlined.
• [AUTO]: plays both the JPEG image files
and MP3 audio tracks in the same album
as a slide show.
• [AUDIO (MP3)]: plays only MP3 audio
tracks continuously.
• [IMAGE (JPEG)]: plays only JPEG
image files as a slide show.
5
6
Press
.
Press DVD MENU.
The list of albums recorded on the DATA
CD or DATA DVD appears.
7
Note
• If you set [MODE (MP3, JPEG)] to [IMAGE
(JPEG)] on a disc that contains MP3 tracks only or
[AUDIO (MP3)] on a disc that contains JPEG files
only, you may not be able to change the [MODE
(MP3, JPEG)] setting.
• PICTURE NAVI does not work when [AUDIO
(MP3)] is selected.
• If you play large MP3 track data and JPEG image
data at the same time, the sound may skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the sound still
skips, then reduce the size of the JPEG file.
DATA CD MP3
AUTO
AUTO
AUDIO (MP3)
IMAGE (JPEG)
4
Tip
• When you select [AUTO], the system can recognize
up to 300 MP3 tracks and 300 JPEG files in a single
album. When you select [AUDIO (MP3)] or [IMAGE
(JPEG)], the system can recognize up to 600 MP3 or
600 JPEG files in a single album. A maximum of 200
albums can be recognized regardless of the selected
mode.
Specifying the slide show
duration
Various Functions for Playing Discs
1
2
The system starts playing the selected
album.
You can turn the album list on and off by
pressing DVD MENU repeatedly.
(JPEG only)
When you play JPEG image files using slide
show, you can specify the duration for slides to
appear on the TV screen.
1
Press
DISPLAY twice.
The Control Menu display appears.
2
Press X/x to select
[INTERVAL], then press
.
The options for [INTERVAL] appear.
3 ( 12)
4)
1(
29/10/2007
NORMAL
NORMAL
FAST
SLOW1
SLOW2
DATA CD JPEG
Press X/x to select the album you want
and press H.
continued
59GB
3
Press X/x to select a setting.
3
The default setting is underlined.
• [NORMAL]: sets the duration to about 6
to 9 seconds.
• [FAST]: sets the duration shorter than
[NORMAL].
• [SLOW1]: sets the duration longer than
[NORMAL].
• [SLOW2]: sets the duration longer than
[SLOW1].
4
Press
The default setting is underlined.
• [MODE1]: The image sweeps in from top
to bottom.
• [MODE2]: The image stretches out from
left to right of the TV screen.
• [MODE3]: The image stretches out from
the center of the TV screen.
• [MODE4]: The images randomly cycle
through the effects.
• [MODE5]: The next image slides over the
previous image.
• [OFF]: turns off this function.
.
Note
• Some JPEG files may take longer to display than
others, which may make the duration seems longer
than the option you selected. Especially progressive
JPEG files or JPEG files of 3,000,000 pixels or more.
Selecting an effect for image
files in the slide show
(JPEG only)
When you play a JPEG image file, you can
select the effect to be used when viewing the
slide show.
1
Press
DISPLAY twice.
The Control Menu display appears.
2
Press X/x to select
then press
.
[EFFECT],
The options for [EFFECT] appear.
3 ( 12)
4)
1(
23/10/2007
MODE1
MODE1
MODE2
MODE3
MODE4
MODE5
OFF
60GB
DATA CD JPEG
Press X/x to select a setting.
4
Press
.
Enjoying DivX® Videos
About DivX Video Files
DivX® is a video file compression technology,
developed by DivX, Inc. This product is an
official DivX® Certified product.
You can play DATA CDs and DATA DVDs that
contain DivX® video files.
DivX video files that the system
can play
The system can play data that is recorded in
DivX format, and which has the extension
“.AVI,” or “.DIVX.” The system will not play
files with the extension “.AVI” or “.DIVX” if
they do not contain a DivX video.
Tip
• For details about playable MP3 audio tracks or JPEG
image files on DATA CDs or DATA DVDs, see
“Discs that the system can play” (page 55).
Note
Playback of DATA CDs (CD-ROMs/CD-Rs/
CD-RWs) and DATA DVDs (DVD-ROMs/
DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs) on
this system is subject to certain conditions:
– With DATA CDs/DATA DVDs that contain
DivX video files in addition to MP3 audio
tracks or JPEG image files, the system plays
only the DivX video files.
However, this system only plays DATA CDs
whose logical format is ISO 9660 Level 1/Level
2 or Joliet, and DATA DVDs of Universal Disk
Format (UDF).
Refer to the operating instructions supplied with
the disc drives and the recording software (not
supplied) for details on the recording format.
About playback order of data on
DATA CDs or DATA DVDs
• The system may not play a DivX video file when the
file has been combined from two or more DivX video
files.
• The system cannot play a DivX video file of size
more than 720 (width) × 576 (height) or 2GB.
• Depending on the DivX video file, sound may skip or
not match the pictures on the TV screen.
• The system cannot play some DivX video files that
are longer than 3 hours.
• Depending on the DivX video file, the picture may
pause or be unclear. In which case, it is recommended
that you create the file at a lower bit rate. If the sound
is still noisy, MP3 is the recommended audio format.
Note, however, this system does not conform to
WMA (Windows Media Audio) format.
• Because of the compression technology used for
DivX video files, it may take some time after you
press H for the picture to appear.
Various Functions for Playing Discs
DATA CDs and DATA DVDs that
the system can play
Selecting an album
1
Press DVD MENU.
A list of albums on the disc appears. Only
albums that contain DivX video files are
listed.
See “Playback order of MP3 audio tracks or
JPEG image files” (page 56). Note that the
playback order may not be applicable,
depending on the software used for creating the
DivX video file, or if there are more than 200
albums and 600 DivX video files in each album.
3( 3)
SUMMER 2003
NEW YEAR'S DAY
MY FAVOURITES
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
2
3
Press X/x to select the album you want
to play.
Press H.
The system starts playing the selected
album.
continued
61GB
To select DivX video files, see “Selecting a
DivX video file” (page 62).
To go to the next or previous
page
To play the next or previous DivX
video file without turning on the
above file list
You can select the next or previous DivX video
file in the same album by pressing ./>.
You can also select the first file of the next
album by pressing > during playback of the
last file of the current album. Note that you
cannot return to the previous album by pressing
.. To return to the previous album, select it
from the album list.
Press C/c.
To turn off the display
Press DVD MENU repeatedly.
To stop playback
Press x.
Tip
• If the number of viewing times is preset, you can play
the DivX video files as many times as the preset
number. The following occurrences are counted:
– when the system is turned off.
– when another file is played.
– when the disc tray is opened.
Selecting a DivX video file
1
After Step 2 of “Selecting an album,”
press
.
The list of files in the album appears.
MY FAVOURITES
1(2 )
HAWAII 2004
VENUS
2
Press X/x to select a file and press
The selected file starts playing.
To go to the next or previous
page
Press C/c.
To return to the previous display
Press O RETURN.
To stop playback
Press x.
62GB
.
Playing VIDEO CDs with
PBC Functions (Ver.2.0)
(PBC Playback)
With PBC (Playback Control) functions, you
can enjoy simple interactive operations, search
functions, and other such operations.
PBC playback allows you to play VIDEO CDs
interactively by following the menu on the TV
screen.
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
3
4
Select the item number you want by the
number buttons.
Press
.
Follow the instructions in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To go back to the menu
Various Functions for Playing Discs
1
Press O RETURN.
Note
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
operating instructions supplied with the disc. In this
case, press H.
Tip
• To play without using PBC, press ./> or the
number buttons while the system is in stop mode to
select a track, then press H or
. The system starts
continuous play. You cannot play still pictures such
as a menu. To return to PBC playback, press x twice,
then press H.
63GB
To change the preset number
Tuner Functions
Presetting Radio Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
2
Press FUNCTION +/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
4
5
Press SYSTEM MENU.
Press X/x repeatedly until “MEMORY”
appears in the front panel display.
Press
or c.
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
Tip
• You can select the preset number directly by
pressing the number buttons.
7
Press
.
The station is stored.
8
9
Repeat Steps 1 to 7 to store other
stations.
Press SYSTEM MENU.
The system menu turns off.
64GB
Restart from Step 1.
Listening to the Radio
Preset radio stations in the system’s memory
first (see “Presetting Radio Stations” (page 64)).
1
Press FUNCTION +/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “FM MODE”
appears in the front panel display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station.
Each time you press the button, the system
tunes in one preset station.
3
4
To turn off the radio
Press X/x to select “MONO.”
5
Press
Tuner Functions
Adjust the volume by pressing
VOLUME +/–.
or c.
The default setting is underlined.
• “STEREO”: stereo reception.
• “MONO”: monaural reception.
Tip
• You can select the preset station number directly
by pressing the number buttons.
3
Press
.
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
Press "/1.
To listen to non-preset radio
stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
TUNING + or –.
To listen to radio stations when
you know the frequencies
Naming preset stations
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
Note
• You cannot enter a name for preset stations of the
Radio Data System (RDS) (page 66).
1
Use direct tuning in Step 2.
1
2
Press D.TUNING.
3
Press
Press the number buttons to select the
frequencies.
.
Tip
• To improve reception, reorient the supplied antennas
(aerials).
Press FUNCTION +/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
The last received station is tuned in.
2
3
4
5
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
Press SYSTEM MENU.
Press X/x repeatedly until “NAME IN”
appears in the front panel display.
Press
or c.
continued
65GB
6
Create a name by using the cursor
buttons.
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station.
7
If you make a mistake
What is the Radio Data
System?
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
RDS is available only for FM stations.*
Press
.
“COMPLETE” appears in the front panel
display, and the station name is stored.
8
Press SYSTEM MENU.
The system menu turns off.
Tip
• You can check the frequency by pressing DISPLAY
repeatedly (page 66).
Viewing the station name or
frequency in the front panel
display
When the system is set to “TUNER FM” or
“TUNER AM,” you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
** Returns to the original display when several seconds
has elapsed.
66GB
Using the Radio Data
System (RDS)
Note
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
Manufacturer
Other Operations
Controlling the TV with the
Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
Code number
RCA/PROSCAN
503, 510, 544
SAMSUNG
515, 517, 544, 557, 566, 569,
574
SANYO
508, 545, 567
SHARP
517, 535, 565
TELEFUNKEN/
SABA
530, 537, 547, 549, 558
THOMSON
530, 537, 547, 549
Note
TOSHIBA
535, 541, 551
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
ZENITH
543, 567
CATV
Code number
SONY
821, 824, 825
HAMLIN/REGAL
836, 837, 838, 839, 840
Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.
JERROLD
830, 831
JERROLD/GI
806, 807, 808, 809, 810, 811,
812, 813, 814
OAK
841, 842, 843
If you set successfully the manufacturer’s code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
PANASONIC
816, 826, 832, 833, 834, 835
PIONEER
828, 829
SCIENTIFIC
ATLANTA
815, 816, 817, 844
Code numbers of controllable TVs
TOCOM/PHILIPS
830, 831
ZENITH
826, 827
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
To control the TV
You can control the TV by using following
buttons.
TV
Manufacturer
Code number
SONY/AIWA
501 (default)
DAEWOO
503, 506, 515, 544
FISHER
508, 545
GRUNDIG
533
By pressing
You can
TV [/1
Turn the TV on or off.
TV INPUT
Switch the TV’s input source
between the TV and other input
sources.
HITACHI
503, 514, 515, 517, 544, 557
TV VOL +/–*
Adjust the TV volume.
ITT/NOKIA
521, 522
TV CH +/–*
Select the TV channel.
JVC
516
Select the TV channel.
LG/GOLDSTAR
503, 515, 517, 544, 568
LOEWE
515
Number
buttons*,
ENTER*
MAGNAVOX
503, 515, 517, 518, 544, 566
TOOLS*
Displays the operation menu for
the current display.
RETURN*
Return to the previous channel or
layer on the menu of the TV.
TV MENU*
Display the menu of the TV.
MITSUBISHI/MGA 503, 527, 544, 566, 568
PANASONIC
Other Operations
Manufacturer
Controlling TVs with the
remote
509, 553, 572
PHILIPS
518, 557, 558
PIONEER
509, 525, 551
continued
67GB
By pressing
You can
MUTING*
Turn off the TV sound
temporarily.
C/X/x/c*,
*
Select the item on the menu.
* To use these buttons while in the TV mode (the TV
button lights up), press the TV button.
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
• The TV mode turns off when you do not operate the
remote for 10 seconds.
Using the THEATRE SYNC
Function
THEATRE SYNC allows you to turn on your
Sony TV and this system, changes the system
mode to “DVD,” and then switches the TV’s
input source you set with one button push.
Preparing for the THEATRE
SYNC function
Register the TV’s input source connected to this
system.
Press and hold TV INPUT while entering the
code for the TV’s input source connected
to this unit (see the table) using the number
buttons.
The TV’s input source is selected.
If you successfully set the TV’s input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes
five times quickly.
Set your TV’s input to the input you used to
connect the unit. For details, see the operating
instructions of your TV.
By pressing Number
TV’s input source
TV INPUT
0
No input source
(Default)
1
VIDEO1
2
VIDEO2
3
VIDEO3
4
VIDEO4
5
VIDEO5
6
VIDEO6
7
VIDEO7
8
VIDEO8
9*
COMPONENT 1
CLEAR*
COMPONENT 2
PICTURE
NAVI*
COMPONENT 3
AUDIO*
COMPONENT 4
SUBTITLE* HDMI 1
68GB
ANGLE*
HDMI 2
VIDEO
FORMAT*
HDMI 3
By pressing Number
TV’s input source
Note
MOVIE/
MUSIC*
HDMI 4
DYNAMIC
BASS*
HDMI 5
• This function is only for Sony TVs. (This function
may not work on some Sony TVs.)
• If distance between TV and this unit is too far, this
function may not work. Install the unit near the TV.
• Keep the remote pointed in the direction of the TV
and this unit while the TV button is flashing.
• Keep the remote pointed in the direction of the TV
and this unit while entering the code.
* Except for North American models.
Operating the THEATRE SYNC
function
Point the remote to the direction of TV and this
unit, then press THEATRE SYNC once.
While transmitting the code from the remote, the
TV button flashes.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
Press and hold TV CH +* while entering the
code for transmit time (see the table) using
the number buttons.
The transmit time from the remote is selected.
If you successfully set the transmit time code,
the TV button flashes twice slowly. If the setting
is unsuccessful, the TV button flashes five times
quickly.
Other Operations
To change the transmit time
* Functions as both TV CH + and SOUND FIELD +
button.
By pressing Number
Transmit time
TV CH +
1
0.5 (Default)
2
1
3
1.5
4
2
5
3
6
4
7
5
8
6
69GB
Using the Sound Effect
Reinforcing bass frequencies
You can reinforce bass frequencies.
Press DYNAMIC BASS.
Bass frequencies are effectively reinforced.
To turn off the sound effect
Press DYNAMIC BASS again.
Using the Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 1 or 10-minutes
increments.
Press SLEEP.
Each time you press this button, the minutes
display (the remaining time) changes as follows:
SLEEP 90M t SLEEP 80M t SLEEP 70M
R
r
SLEEP OFF T SLEEP 10M ..... SLEEP 60M
When you set the sleep timer, “SLEEP” lights
up in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
To cancel the sleep timer
function
Press SLEEP repeatedly until “SLEEP OFF”
appears in the front panel display.
To set the sleep timer using the
system menu
1
2
Press SYSTEM MENU.
3
Press X/x to select a setting.
Press X/x repeatedly until “SLEEP” appears
in the front panel display, then press
or
c.
The minutes display (the remaining time)
changes as follows:
SLEEP 90M y SLEEP 80M y SLEEP 70M
Y
Y
SLEEP OFF y SLEEP 10M ..... SLEEP 60M
Tip
• You can select the remaining time by pressing
the number buttons. In this case, you can preset
the time in 1-minute increments.
70GB
4
Press
.
The setting is made and “SLEEP” lights up in
the front panel display.
5
Press SYSTEM MENU.
The system menu turns off.
Changing the Brightness
of the Front Panel Display
The brightness of the front panel display can be
set to either of 2 levels.
1
2
3
Press SYSTEM MENU.
Press X/x repeatedly until “DIMMER”
appears in the front panel display, then
press
or c.
Press X/x to select the brightness of
the front panel display.
4
Press
.
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Other Operations
The default setting is underlined.
• “DIMMER OFF”: Bright.
• “DIMMER ON”: The front panel display
becomes dark.
71GB
Using the DIGITAL MEDIA
PORT Adapter
The DIGITAL MEDIA PORT (DMPORT)
adapter is for enjoying sound from a portable
audio source or computer. By connecting a
DIGITAL MEDIA PORT adapter, you can
enjoy sound from the connected component on
the system.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL MEDIA
PORT adapter, see “Connecting Other
Components” (page 32).
Note
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), you may be able to operate a
connected component using either the buttons on the
remote or the unit. The following illustration shows
an example of buttons that can be used in this case.
Note
• Do not connect an adaptor other than the DIGITAL
MEDIA PORT adapter.
• Do not connect or disconnect the DIGITAL MEDIA
PORT adapter to/from the unit while the system is
turned on.
• Depending on the type of DIGITAL MEDIA PORT
adapter (not supplied), the images are also output. In
this case, the system outputs the EURO AV
OUTPUT signal only regardless of the type of video
signal.
Playing the connected
component on the system
1
2
Press FUNCTION +/– repeatedly until
“DMPORT” appears in the front panel
display.
Start playback of the connected
component.
The sound and images from the connected
component are played on the system or
connected TV.
For operation details, see the operating
instructions of the DIGITAL MEDIA
PORT adapter (not supplied).
Tip
• When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press SOUND FIELD +/– repeatedly until
“A.F.D. STD” appears in the front panel display. To
cancel, select other than “A.F.D. STD.”
72GB
./>
X
H
x
Deactivating the Buttons
on the Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
When the child lock function is activated, the
buttons on the unit are locked and “
” lights
up in the front panel display. (You can operate
the system by using the remote.)
Note
• When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
the front panel display.
3
Press SYSTEM MENU.
Press X/x repeatedly until “CHILD
LOCK” appears in the front panel
display, then press
or c.
Press X/x to select a setting.
The default setting is underlined.
• “OFF”: Child lock function off.
• “ON”: Child lock function on.
4
Press
Other Operations
1
2
.
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
Tip
• You can activate the child lock function by pressing
x for more than 5 seconds (“
” lights up in the
front panel display).
To cancel, press x for more than 5 seconds so that
“
” disappears from the front panel display.
73GB
4
Advanced Settings and Adjustments
Press X/x to select [ON t], then press
.
x If you have not entered a password
The display for registering a new password
appears.
Locking Discs
(CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL)
PARENTAL CONTROL
Enter a new 4-digit password,
then press ENTER .
You can set two kinds of playback restrictions
for the desired disc.
• Custom Parental Control
You can set playback restrictions so that the
system will not play inappropriate discs.
• Parental Control
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The same password is used for both Custom
Parental Control and Parental Control.
Enter a 4-digit password using the number
buttons, then press .
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
Preventing playback of
specific discs [CUSTOM
PARENTAL CONTROL]
PARENTAL CONTROL
Enter password, then press
ENTER
.
You can set the same Custom Parental Control
password for up to 40 discs. When you set the
41st-disc, the first disc is canceled.
1
Insert the disc you want to lock.
If the disc is playing, press x to stop
playback.
2
5
Press
DISPLAY while the system is
in stop mode.
[Custom parental control is set.] appears
and the TV screen returns to the Control
Menu display.
The Control Menu display appears.
3
Press X/x to select
[PARENTAL CONTROL], then press
.
To turn off the Custom Parental
Control function
The options for [PARENTAL CONTROL]
appear.
1
Follow steps 1 through 3 of “Preventing
playback of specific discs [CUSTOM
PARENTAL CONTROL].”
2
Press X/x to select [OFF t], then press
.
3
Enter your 4-digit password using the
number buttons, then press
.
12(27)
18(34)
T
1:32:55
OFF
ON
PLAYER
PASSWORD
74GB
Enter or re-enter your 4-digit password
using the number buttons, then press
.
DVD VIDEO
To play a disc for which Custom
Parental Control is set
1
2
Insert the disc for which Custom Parental
Control is set.
Press X/x to select
[PARENTAL CONTROL], then press
.
The options for [PARENTAL CONTROL]
appear.
The [CUSTOM PARENTAL CONTROL]
display appears.
12(27)
18(34)
T
1:32:55
DVD VIDEO
CUSTOM PARENTAL CONTROL
OFF
ON
PLAYER
PASSWORD
Custom parental control is already
set. To play, enter your password
and press ENTER .
3
2
Press X/x to select [PLAYER t], then
press
.
Enter your 4-digit password using the
number buttons, then press
.
x If you have not entered a password
The system is ready for playback.
The display for registering a new password
appears.
Tip
Limiting playback for children
[PARENTAL CONTROL]
(DVD only)
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as the
age of the users. The [PARENTAL CONTROL]
function allows you to set a playback limitation
level.
1
Press
DISPLAY while the system is
in stop mode.
PARENTAL CONTROL
Enter a new 4-digit password,
then press ENTER .
Enter a 4-digit password using the number
buttons, then press .
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
Advanced Settings and Adjustments
• If you forget your password, enter the 6-digit number
“199703” using the number buttons when the
[CUSTOM PARENTAL CONTROL] display asks
you for your password, then press
. The display
will ask you to enter a new 4-digit password.
The Control Menu display appears.
PARENTAL CONTROL
Enter password, then press
ENTER
.
continued
75GB
4
Enter or re-enter your 4-digit password
using the number buttons, then press
.
8
Press X/x to select the level you want,
then press
.
Parental Control setting is complete.
The display for setting the playback
limitation level appears.
PARENTAL CONTROL
LEVEL:
STANDARD:
PARENTAL CONTROL
LEVEL:
STANDARD:
4:
PG13
USA
OFF
USA
The lower the value, the stricter the
limitation.
5
Press X/x to select [STANDARD], then
press
.
To turn off the Parental Control
function
The selection items for [STANDARD] are
displayed.
Set [LEVEL] to [OFF] in Step 8.
To play a disc for which Parental
Control is set
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
USA
USA
OTHERS
1
The display for entering your password
appears.
2
6
Press X/x to select [LEVEL], then press
.
The selection items for [LEVEL] are
displayed.
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
OFF
8:
7:
6:
5:
76GB
Enter your 4-digit password using the
number buttons, then press
.
The system starts playback.
Press X/x to select a geographic area
as the playback limitation level, then
press
.
The area is selected.
When you select [OTHERS t], select and
enter a standard code in the table of
“Parental Control Area Code List”
(page 102) using the number buttons.
7
Insert the disc and press H.
NC17
R
Tip
• If you forget your password, remove the disc and
repeat steps 1 to 3 of “Preventing playback of specific
discs [CUSTOM PARENTAL CONTROL].” When
you are asked to enter your password, enter “199703”
using the number buttons, then press
. The display
will ask you to enter a new 4-digit password. After
you enter a new 4-digit password, replace the disc in
the unit and press H. When the display for entering
your password appears, enter your new password.
Note
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
system.
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
Changing the password
1
Press
DISPLAY while the system is
in stop mode.
The Control Menu display appears.
2
Press X/x to select
[PARENTAL CONTROL], then press
.
The options for [PARENTAL CONTROL]
appear.
3
Press X/x to select [PASSWORD t],
then press
.
The display for entering the password
appears.
4
5
Enter a new 4-digit password using the
number buttons, then press
.
(SPEAKER FORMATION)
Depending on the shape of the room, there will
be some speakers you cannot install. For the
better surround sound, it is recommended that
first you decide the position of the speakers.
1
2
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
To confirm your password, re-enter it
using the number buttons, then press
.
Press X/x to select
FORMATION], then press
1(44)
3(28)
T
0:03:04
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
If you make a mistake entering
your password
Press C before you press
correct number.
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
[SPEAKER
.
DVD VIDEO
and input the
4
Press X/x to select [SPEAKER
FORMATION], then press
.
The options for [SPEAKER
FORMATION] appear.
SPEAKER FORMATION
Advanced Settings and Adjustments
6
Enter your 4-digit password using the
number buttons, then press
.
Getting Optimal Surround
Sound for a Room
STANDARD(WIRELESS)
continued
77GB
5
Press C/c to select a setting.
• [STANDARD (WIRELESS)]: when
installing the front and center speakers,
connecting the unit with the speaker cords
and surround speakers using the wireless
system.
• [ALL FRONT]: when installing all the
speakers in front of the listening position.
• [ALL FRONT - NO CENTER]: when
installing the front and surround speakers
in front of the listening position.
• [NO CENTER]: when installing the front
and surround speakers.
• [SECOND ROOM]: when installing the
front speakers in one room and surround
speakers in another.
Connect the surround speakers to the unit.
• [NO SURROUND]: when installing the
center and front speakers.
• [FRONT ONLY]: when installing the
front speakers.
78GB
You can also install the speakers as below.
Connect the speakers (impedance 3.0 ohms
- not supplied) by the supplied speaker
cords (OPTION, gray/blue) to the system.
Note
• Speaker sound in the other room is the same as
that of the front and surround speakers.
• [STANDARD (WIRED)]: when
installing all the speakers and connecting
the unit by the speaker cords.
Calibrating the
Appropriate Settings
Automatically
(AUTO CALIBRATION)
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbor.
6
1
Press
.
The setting is made.
7
Press X/x to select [YES] or [NO], then
press
.
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
3
Press X/x to select
FORMATION], then press
1(44)
3(28)
T
0:03:04
SPEAKER FORMATION
SPEAKER FORMATION
AUTO CALIBRATION
SPEAKER FORMATION
Continue with AUTO CALIBRATION?
[SPEAKER
.
DVD VIDEO
YES
NO
4
Note
• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
CALIBRATION].
• To set [AUTO CALIBRATION], you need to
connect the supplied calibration mic.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [CONNECTION] setting, the
[STANDARD (WIRED)] or [STANDARD
(WIRELESS)] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to [STANDARD
(WIRELESS)].
Press X/x to select [AUTO
CALIBRATION], then press
.
The options for [AUTO CALIBRATION]
appear.
Advanced Settings and Adjustments
• [YES]: continue with [AUTO
CALIBRATION], see Step 4 of
“Calibrating the Appropriate Settings
Automatically” (page 79).
• [NO]: exit [SPEAKER FORMATION].
2
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
YES
NO
continued
79GB
Connect the calibration mic to the A.CAL
MIC jack on the front panel, and set it up at
the ear level using a tripod, etc. (not
supplied). The front of each speaker should
face the calibration mic, and there should be
no obstruction between the speakers and the
calibration mic. Be quiet during the
measurement.
Note
• Avoid being in the measurement area and
making noise during the measurement (about
one minute), to avoid measurement failure.
During the measurement, test signals are output
from the speakers.
• The environment of the room in which the
system is installed may affect measurements.
• If an error message appears, follow the message,
then select [YES].
An error message appears when:
– the headphones are connected.
– the calibration mic is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly
connected.
– front and surround speakers are not correctly
connected.
– subwoofer is not connected.
AUDIO IN / A.CAL MIC
Calibration mic
6
Press C/X/x/c to select [YES] or [NO],
then press
.
x The measurement is OK.
Disconnect the calibration mic, then select
[YES]. The result is implemented.
Measurement complete.
FRONT L :
5.00m 0.0dB
FRONT R :
5.00m 0.0dB
CENTER :
5.00m + 1.0dB
SUBWOOFER :
5.00m + 4.0dB
SURROUND L :
3.00m - 2.0dB
SURROUND R :
3.00m - 2.0dB
If OK, unplug calibration mic and select
“YES”.
YES
NO
x The measurement is not OK.
5
Follow the message, then select [YES] to
retry.
Press X/x to select [YES], then press
.
Measurement failure.
Calibration starts.
Check speaker connection.
Retry?
Measuring. Please wait a moment.
YES
NO
Tip
• You can check the distance between the listening
position and each speaker. See page 86.
80GB
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not insert or eject a disc.
– do not connect the headphones.
– do not disconnect the calibration mic.
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture and
sound.
For an overall list of Setup Display items, see
page 110.
Displayed items vary depending on the country
model.
Note
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
1
2
Press FUNCTION +/– repeatedly until
“DVD” appears in the front panel
display.
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
Press X/x to select
then press
.
[SETUP],
The options for [SETUP] appear.
12(27)
18(34)
T
0:00:02
DVD VIDEO
QUICK
QUICK
CUSTOM
RESET
BNR
4
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
Advanced Settings and Adjustments
3
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
continued
81GB
5
Press X/x to select the setup item from
the displayed list: [LANGUAGE
SETUP], [SCREEN SETUP], [CUSTOM
SETUP], or [SPEAKER SETUP]. Then
press
.
To reset all of the [SETUP]
settings
1
2
The Setup item is selected.
Example: [SCREEN SETUP]
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
16:9
ON
JACKET PICTURE
FULL
.
Select [YES] using X/x.
You can also quit the process and return to the
Control Menu display by selecting [NO] here.
3
Selected item
Select [RESET] in Step 4 and press
Press
.
All the settings explained on pages 83 to 88
return to the default settings. Do not press [/
1 while resetting the system as it takes a few
seconds to complete.
Note
• When you turn the system on after resetting and no
disc is in the unit, the guide message appears on the
TV screen. To perform the Quick Setup (page 22),
press
, to return to normal screen, press CLEAR.
Setup items
6
Select an item using X/x, then press
.
The options for the selected item appear.
Example: [TV TYPE]
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
Options
7
Select a setting using X/x, then press
.
The setting is selected and setup is
complete.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
4:3 LETTER BOX
ON
JACKET PICTURE
FULL
Selected setting
82GB
Setting the Display or
Sound Track Language
[LANGUAGE SETUP]
[LANGUAGE SETUP] allows you to set
various languages for the on-screen display or
sound track.
Select [LANGUAGE SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 81).
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
Settings for the Display
[SCREEN SETUP]
Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
For details, see “Using the Setup Display”
(page 81).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
16:9
YCBCR/RGB (HDMI):
YCBCR
SCREEN SAVER:
ON
JACKET PICTURE
BACKGROUND:
LINE:
VIDEO
FULL
4:3 OUTPUT:
ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
Switches the display language on the TV screen.
x [MENU] (DVD VIDEO only)
[16:9]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[4:3 LETTER
BOX]
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the TV screen.
You can select the desired language for the
disc’s menu.
x [AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language
given priority in the disc is selected.
[4:3 PAN SCAN] Select this when you connect a 4:3
x [SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
Advanced Settings and Adjustments
x [OSD] (On-Screen Display)
[16:9]
Tip
• If you select [OTHERS t] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
from “Language Code List” (page 102) using the
number buttons.
[4:3 LETTER BOX]
Note
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
[4:3 PAN SCAN]
continued
83GB
Note
x [LINE]
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
Selects the output method for video signals from
the EURO AV T OUTPUT (TO TV) jack on
the rear panel of the unit.
x [YCBCR/RGB (HDMI)]
Selects the type of HDMI signal output from
HDMI OUT jack.
[YCBCR]
Outputs YCBCR signals.
[RGB]
Outputs RGB signals.
Note
• If the playback picture becomes distorted, set
[YCBCR] to [RGB].
• If the HDMI OUT jack is connected to equipment
with a DVI jack, [RGB] signals will be automatically
output even when you select [YCBCR].
x [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a CD, DATA CD (MP3
audio), or DATA DVD (MP3 audio) for more
than 15 minutes. The screen saver will help
prevent your display device from becoming
damaged (ghosting). Press any button (e.g., H
button) to cancel the screen saver.
[ON]
Turns on the screen saver.
[OFF]
Turns off the screen saver.
x [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD (MP3
audio).
84GB
[JACKET
PICTURE]
The jacket picture (still picture)
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
[GRAPHICS]
A preset picture stored in the
system appears.
[BLUE]
The background color is blue.
[BLACK]
The background color is black.
[VIDEO]
Outputs video signals.
[RGB]
Outputs RGB signals.
Note
• If your TV does not accept RGB signals, no picture
appears on the TV screen even if you select [RGB].
Refer to the operating instructions supplied with your
TV.
• You cannot select [RGB] while the HDMI indicator
is lit. [RGB] automatically switches to [VIDEO]
when you turn on any connected HDMI equipment.
x [4:3 OUTPUT]
This setting is effective only when you set [TV
TYPE] in [SCREEN SETUP] to [16:9]
(page 83). Adjust to watch 4:3 aspect ratio
progressive signals. If you can change the aspect
ratio on your progressive format (525p/625p)
compatible TV, change the setting on your TV,
not the system. Note that this setting is effective
only for HDMI connection or progressive
signals output from the COMPONENT VIDEO
OUT jacks.
Note
• This setting is effective only when
“PROGRESSIVE” is selected by using VIDEO
FORMAT (page 30).
[FULL]
Select this when you can change
the aspect ratio on your TV.
[NORMAL]
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
16:9 aspect ratio TV
Custom Settings
[CUSTOM SETUP]
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
For details, see “Using the Setup Display”
(page 81).
The default settings are underlined.
CUSTOM SETUP
OFF
HDMI CONTROL:
OFF
STB SYNCHRO:
AUTO
PAUSE MODE:
OFF
TRACK SELECTION:
ON
MULTI-DISC RESUME:
OFF
AUDIO DRC:
OFF
AUDIO (HDMI):
Registration Code
DivX:
[ON]
Sets the STB SYNCHRO function
to on.
Note
• This function is available only when you set [HDMI
CONTROL] to [ON].
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x [TRACK SELECTION] (DVD VIDEO only)
x [HDMI CONTROL]
[OFF]
Sets the HDMI CONTROL
function to off.
[ON]
Sets the HDMI CONTROL
function to on.
You can operate mutually
between components that are
connected with the HDMI cord.
[OFF]
No priority given.
[AUTO]
Priority given.
Note
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection]
appears and you can not set to [ON].
x [STB SYNCHRO]
Switches the STB SYNCHRO function on or
off. This function is available when you connect
the system and TV with the HDMI cord and you
set [HDMI CONTROL] to [ON]. For details on
this function, see the HDMI CONTROL Guide
(supplied separately).
[OFF]
Sets the STB SYNCHRO function
to off.
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
[LANGUAGE SETUP] (page 83). (Depending on
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
Advanced Settings and Adjustments
Switches the HDMI CONTROL function on or
off. This function is available when you connect
the system and TV with the HDMI cord. For
details on this function, see the HDMI
CONTROL Guide (supplied separately).
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
[ON]
Stores the resume settings in
memory for up to 40 discs.
[OFF]
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
continued
85GB
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
[OFF]
No compression of dynamic
range.
[STANDARD]
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
[MAX]
Compresses dynamic range fully.
x [AUDIO (HDMI)]
Selects the audio output status from the HDMI
OUT jack.
Settings for the Speakers
[SPEAKER SETUP]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 81).
The default settings are underlined.
Note
[OFF]
The sound is not output from the
HDMI OUT jack.
[ON]
Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.
• You cannot operate these setup items when you
connect headphones to the unit.
SPEAKER SETUP
CONNECTION:
DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
OFF
TEST TONE:
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
Note
• When you connect the unit and TV with the HDMI
cord and [ON] is selected, AUDIO DRC, A/V SYNC,
DYNAMIC BASS, MOVIE/MUSIC, and sound field
are not applied to the sound that is output from the
TV.
x [DivX]
Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.
86GB
YES
YES
YES
YES
To return to the default setting
when changing a setting
Select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not
return to the default setting.
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
[SUBWOOFER]
[YES]
x [DISTANCE (SURROUND)]
Note
• When you change the [CONNECTION] setting, the
[STANDARD (WIRED)] or [STANDARD
(WIRELESS)] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to [STANDARD
(WIRELESS)].
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 22), the settings is automatically
displayed.
x [DISTANCE (FRONT)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 22), the settings is automatically
displayed.
0.00 - 7.00 m2)/
0 - 23 ft
0.00 - 7.00 m2)/
0 - 23 ft
[L/R]
3.00 m/10 ft1)3)
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
3.00 m/10 ft1)3)
Front speaker distance from the
listening position can be set from
0.00 to 7.00 meters2) (0 to 23 ft).
[CENTER]
3.00 m/10 ft1)3)
Center speaker distance from the
listening position can be set from
(appears when you 0.00 to 7.00 meters2) (0 to 23 ft).
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
[SUBWOOFER]
3.00 m/10 ft1)3)
1)
Subwoofer distance from the
listening position can be set from
0.00 to 7.00 meters2) (0 to 23 ft).
When you perform the Quick Setup (page 22), the
default settings are changed.
2)0.00
to 7.01 meters for North American models.
3)3.04
m/10 ft for North American models.
Surround speaker distance
from the listening position can
(appears when you
be set from 0.00 to 7.00
set [SURROUND] to meters2) (0 to 23 ft).
[YES] in the
[CONNECTION]
setting.)
1)When
you perform the Quick Setup (page 22), the
default settings are changed.
2)0.00
to 7.01 meters for North American models.
3)
3.04 m/10 ft for North American models.
Note
Advanced Settings and Adjustments
Be sure to change the value in the Setup Display
when you move the speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range,
/
** m is displayed (**
being the number).
indicates over the
recommended distance.
indicates below.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
continued
87GB
[CENTER]
0.0 dB
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
[SUBWOOFER]
+2.0 dB
Set this between –6.0 dB and
+6.0 dB.
1
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
Set this between –6.0 dB and
+6.0 dB.
2
Turn the VOLUME control on the unit, or press
VOLUME +/– on the remote.
[ON]
The test tone is not emitted from the
speakers.
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
[SETUP],
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
4
5
6
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
or
Press X/x repeatedly to select [TEST
TONE], then press
or c.
Press X/x repeatedly to select [ON],
then press
.
You will hear the test tone from each
speaker in sequence.
7
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Press X/x to select
then press
.
The options for [SETUP] appear.
3
To adjust the volume of all the
speakers at one time
[OFF]
Press
DISPLAY when the system is
in stop mode.
The Control Menu display appears.
Set this between –6.0 dB and
+6.0 dB.
x [LEVEL (SURROUND)]
[L/R]
0.0 dB
Adjusting the speaker level by
using the test tone
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
The test tone is emitted from only the
speaker which you are adjusting.
8
9
Press
when you have finished
making adjustments.
Press X/x repeatedly to select [TEST
TONE], then press
.
10 Press X/x repeatedly to select [OFF],
then press
.
Note
• The test tone signals are not output from the HDMI
OUT jack.
88GB
Returning to the Default
Settings
You can return the system parameters, such as
preset stations, to the default settings.
"/1
1
2
A
x
Press "/1 to turn on the system.
Press x, A, and "/1 on the unit at the
same time.
“COLD RESET” appears in the front panel
display and the default settings are returned.
Advanced Settings and Adjustments
89GB
On adjusting volume
Additional Information
Precautions
On power sources
On cleaning
• Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by
the cord.
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the unit in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the unit can overheat and malfunction.
• Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block
the ventilation slots.
• Do not install the unit near heat sources such as
radiators, or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the unit and discs away from equipment with
strong magnets, such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the unit.
On operation
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the control unit.
Should this occur, the system may not operate
properly. In this case, remove the disc and leave the
system turned on for about half an hour until the
moisture evaporates.
• When you move the system, take out any disc. If you
don’t, the disc may be damaged.
• If anything falls into the cabinet, unplug the unit and
have it checked by qualified personnel before
operating it any further.
90GB
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
On cleaning discs, disc/lens
cleaners
• Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause
the apparatus to malfunction.
On your TV’s color
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers further away from the TV set.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
On moving the system
Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
About the AC adaptor
• The nameplate is located on the bottom exterior.
• Do not use any AC adaptor other than the AC-SD1.
Notes about the Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
Troubleshooting
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should any
problem persist, consult your nearest Sony
dealer.
Note that if service personnel changes some
parts during repair, these parts may be retained.
In the event of a problem with the surround
system, have a Sony dealer check the entire
system together (main unit, IR transmitter, AC
adaptor, and surround speaker (L)).
Power
The power is not turned on.
• Check that the AC power cord (mains lead) is
connected securely.
• Press "/1 after “STANDBY” disappears from the
front panel display.
This system can only play back a standard
circular disc. Using neither standard nor circular
discs (e.g., card, heart, or star shape) may cause
a malfunction.
The IR status indicator on the surround
speaker (L) does not turn on.
• Press POWER to turn the AC adaptor off, connect
the speakers properly, and then press POWER to
turn the AC adaptor on.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
Additional Information
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
If “PROTECTOR” and “PUSH POWER” appear
alternately in the front panel display.
Press "/1 to turn off the system, and check the
following items after “STANDBY” disappears.
• Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the
system?
After checking the above items and fixing any
problems, turn on the system. If the cause of the
problem cannot be found even after checking all the
above items, consult your nearest Sony dealer.
Picture
There is no picture.
• The SCART (EURO AV) cord is not connected
securely.
• The SCART (EURO AV) cord is damaged.
• The unit is not connected to the correct
EURO AV t INPUT jack (page 16).
• The video input on the TV is not set so that you
can view pictures from the system.
• Check the output method on your system
(page 84).
continued
91GB
• You have set progressive format but your TV
cannot accept the signal in progressive format. In
this case, return the setting to interlace format (the
default setting) (page 30).
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace format (the
default setting) (page 30).
• Re-connect the connecting cord securely.
• The unit is connected to an input device that is not
HDCP (high-bandwidth digital content
protection) compliant (“HDMI” on the front panel
does not light up). See page 105.
• If the HDMI OUT jack is used for video output,
changing the type of video signal output from the
HDMI OUT jack by pressing VIDEO FORMAT
may solve the problem (page 29).
Connect the TV and the unit using a video jack
other than the HDMI OUT, and switch the TV’s
input to the connected video input so that you can
see the on-screen displays. Change the type of
video signal output from the HDMI OUT jack,
and switch the TV’s input back to HDMI. If the
picture still does not appear, repeat the steps and
try other options.
• You have selected “PROGRESSIVE” using the
VIDEO FORMAT button on the remote
(“PROGRE” lights up in the front panel display)
even though your TV cannot accept the
progressive signal. In this case, disconnect the
HDMI cord from the unit and then select
“INTERLACE” so that “PROGRE” turns off.
• If the signal from the LINE OUT (VIDEO) jack is
distorted, change the type of video signal output
from the HDMI OUT jack by pressing VIDEO
FORMAT to [720 × 480p]* (page 29).
* Depending on the country, [720 × 576p] may
appear.
Picture noise appears.
• The disc is dirty or flawed.
Even though you set the aspect ratio in [TV
TYPE] of [SCREEN SETUP], the picture does
not fill the TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV screen.
The subwoofer and the front speakers in this system
are magnetically shielded to prevent magnetic
leakage. However, some leakage may occur, as a
high-strength magnet is employed. If this happens,
check the following items:
92GB
• If the speakers are used with a CRT-based TV or
projector, install the speakers at least 0.3 meters
(1.0 ft) from the TV set.
• If the color irregularity persists, turn off the TV set
once, then turn it on after 15 to 30 minutes.
• If howling occurs, reposition the speakers farther
away from the TV set.
• Make sure that no magnetic object (magnetic latch
on a TV stand, health care device, toy, etc.) is
placed near the speakers.
Sound
There is no sound.
• The speaker cord is not connected securely.
• Press MUTING on the remote if “MUTING ON”
is displayed in the front panel display.
• The system is in pause mode or in Slow-motion
Play mode. Press H to return to normal play
mode.
• Fast forward or fast reverse is performed. Press
H to return to normal play mode.
• Check the speaker settings (page 86).
• The equipment connected to the HDMI OUT jack
does not conform to the audio signal format, in
this case set [AUDIO (HDMI)] in [CUSTOM
SETUP] to [ON] (page 86).
No sound is output from the HDMI OUT jack.
• Set [AUDIO (HDMI)] in [CUSTOM SETUP] to
[ON] (page 86).
• The HDMI OUT jack is connected to a DVI
(digital visual interface) device (DVI (digital
visual interface) jacks do not accept audio
signals).
• Try the following: 1 Turn the system off and on
again. 2 Turn the connected equipment off and
on again. 3 Disconnect and then connect the
HDMI cord again.
The left and right sounds are unbalanced or
reversed.
• Check that the speakers and components are
connected correctly and securely.
There is no sound from the subwoofer.
• Check the speaker connections and settings (page
16, 86).
• Set the sound field to “A.F.D. STD” (page 38).
Severe hum or noise is heard.
• Check that the speakers and components are
connected securely.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 ft)
away from your TV set or a fluorescent light.
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
• Clean the disc.
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
• Set [AUDIO] to [STEREO] by pressing AUDIO
(page 48).
• Make sure the unit is connected properly.
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
• Make sure the sound field function is on (page 38).
• Check the speaker connections and settings (page
16, 86).
• Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
The sound comes from the center speaker
only.
• Depending on the disc, the sound may come from
the center speaker only.
No sound or only a very low-level sound is
heard from the surround speakers.
• Check the speaker connections and settings (page
16, 86).
• Make sure the sound field function is on (page 38).
• Depending on the source, the effect of the
surround speakers may be less noticeable.
• Wireless setting of the surround speaker is not
correct (page 21).
• The plasma display may interfere with
transmission, in which case, adjust the position of
the IR transmitter and IR receiver of the surround
speaker (L) (page 21).
• Do not install the surround speaker (L) in a place
exposed to direct sunlight or strong light such as
an incandescent lamp.
• Clean the surface of the IR transmitter and IR
receiver of the surround speaker (L).
• A 2 channel source is being played.
The beginning of the sound is cut off.
• Set the Movie/Music mode to “MOVIE” or
“MUSIC” (page 37).
• Set the sound field to “A.F.D. STD” (page 38).
Operation
Radio stations cannot be tuned in.
• Check that the antenna (aerial) is connected
securely. Adjust the antenna (aerial) or connect an
external antenna (aerial) if necessary.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
• No stations have been preset or the preset stations
have been cleared (when tuning by scanning
preset stations). Preset the stations (page 64).
• Press DISPLAY so that the frequency appears in
the front panel display.
The remote does not function.
• There are obstacles between the remote and the
unit.
• The distance between the remote and the unit is
too far.
• The remote is not pointed at the remote sensor on
the unit.
• The batteries in the remote are weak.
The IR status indicator on the surround
speaker (L) momentarily turns orange.
• The indicator momentarily turns orange. This is
not a malfunction.
• There is obstruction, such as a person or object
between the IR transmitter and the IR receiver of
the surround speaker (L). Adjust the IR
transmitter and the IR receiver of the surround
speaker (L).
Additional Information
No sound is heard from the center speaker.
• Check the speaker connections and settings (page
16, 86).
• Make sure the sound field function is on (page 38).
• Depending on the source, the effect of the center
speaker may be less noticeable.
• A 2 channel source is being played.
There is no sound from the speakers that are
indicated in the front panel display.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate
the speakers which output sound (page 38, 77).
The IR status indicator on the surround
speaker (L) flashes in orange.
• The IR receiver of the surround speaker (L) is
receiving an infrared signal from another Sony’s
wireless product. Move the IR transmitter and/or
the surround speaker so that the IR status indicator
turns green.
• Move the wireless system away from any other
nearby wireless system(s).
• Point the IR transmitter at the IR receiver of the
surround speaker (L).
continued
93GB
The disc does not play.
• There is no disc inserted.
• The disc is upside down.
Insert the disc with the playback side facing down.
• The disc is skewed on the disc tray.
• The system cannot play CD-ROMs, etc. (page 5).
• The region code on the DVD does not match the
system.
• Moisture has condensed inside the unit and may
cause damage to the lenses. Remove the disc and
leave the unit turned on for about half an hour.
The MP3 audio track cannot be played.
• The DATA CD is not recorded in the MP3 format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
• The DATA DVD is not recorded in an MP3
format that conforms to UDF (Universal Disk
Format).
• The MP3 audio track does not have the extension
“.MP3.”
• The data is not formatted in MP3 even though it
has the extension “.MP3.”
• The data is not MPEG1 Audio Layer 3 data.
• The system cannot play audio tracks in MP3PRO
format.
• The [MODE (MP3, JPEG)] setting has been set to
[IMAGE (JPEG)] (page 59).
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
• The DATA CD/DATA DVD contains a DivX
video file.
The JPEG image file cannot be played.
• The DATA CD is not recorded in a JPEG format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
• The DATA DVD is not recorded in a JPEG format
that conforms to UDF (Universal Disk Format).
• It has an extension other than “.JPEG” or “.JPG.”
• It is larger than 3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000 pixels in
Progressive JPEG which is mainly used on the
Internet WEB site.
• It does not fit the TV screen (those images are
reduced).
• The [MODE (MP3, JPEG)] setting has been set to
[AUDIO (MP3)] (page 59).
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
• The DATA CD/DATA DVD contains a DivX
video file.
94GB
The MP3 audio tracks and JPEG image file
starts playing simultaneously.
• [AUTO] has been selected in [MODE (MP3,
JPEG)] (page 59).
The DivX video file cannot be played.
• The file is not created in DivX format.
• The file has an extension other than “.AVI” or
“.DIVX.”
• The DATA CD/DATA DVD is not created in a
DivX format that conforms to ISO 9660 Level 1/
Level 2 or, Joliet/UDF.
• The DivX video file is larger than 720 (width) ×
576 (height).
The titles of album/track/file name are not
displayed correctly.
• The system can only display numbers and letters
of the alphabets. Other characters are displayed as
[*].
A disc does not start playing from the
beginning.
• Program Play, Shuffle Play, or Repeat Play has
been selected.
Press CLEAR to cancel these functions before
playing a disc.
• Resume Play has been selected.
During stop, press x on the unit or the remote and
then start playback (page 43).
• The title, DVD or PBC menu automatically
appears on the TV screen.
The system starts playing the disc
automatically.
• The DVD features an auto playback function.
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the system stops
playback at the auto pause signal.
You cannot perform some functions such as
Stop, Search, Slow-motion Play, or Repeat
Play.
• Depending on the disc, you may not be able to
perform some of the operations above. See the
operating instructions that came with the disc.
Messages do not appear on the TV screen in
the language you want.
• In the Setup Display, select the desired language
for the on-screen display in [OSD] under
[LANGUAGE SETUP] (page 83).
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played (page 53).
• The DVD prohibits changing the angles.
A disc cannot be ejected and “LOCKED”
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
No sound is output from the system and TV
while using the System Audio Control
function.
• Set the [AUDIO (HDMI)] setting in [CUSTOM
SETUP] to [ON] (page 86).
• Make sure that the connected TV is compatible
with the System Audio Control function.
• For details on the System Audio Control function,
see the HDMI CONTROL Guide (supplied
separately).
Additional Information
[Data error] appears on the TV screen when
playing a DATA CD or DATA DVD.
• The MP3 audio track/JPEG image file/DivX
video file you want to play is broken.
• The data is not MPEG1 Audio Layer 3 data.
• The JPEG image file format does not conform to
DCF.
• The JPEG image file has the extension “.JPG” or
“.JPEG,” but is not in JPEG format.
• The file you want to play has the extension “.AVI”
or “.DIVX” but is not in DivX format, or is in
DivX format but does not conform to a DivX
Certified profiles.
• Check the connected component’s setting for the
HDMI CONTROL function. See the operating
instructions of the component.
• If you change the HDMI connection, connect and
disconnect the AC power cord (mains lead), or
have a power failure, set the [HDMI CONTROL]
setting in [CUSTOM SETUP] to [OFF], then set
the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 85).
• For details on the HDMI CONTROL function, see
the HDMI CONTROL Guide (supplied
separately).
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.
The unit does not work and “CHILD LOCK”
appears in the front panel display when you
press any button on the unit.
• Set the child lock function to off (page 73).
The HDMI CONTROL function does not work.
• When “HDMI” does not light up in the front panel
display, check the HDMI connection (page 28).
• Set the [HDMI CONTROL] setting in [CUSTOM
SETUP] to [ON] (page 85).
• Make sure that the connected component is
compatible with the HDMI CONTROL function.
• Check that the AC power cord (mains lead) of the
connected component is connected securely.
95GB
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case,
check the following table.
C:13:50
Specifications
Amplifier section
Stereo mode (rated)
108 W + 108 W (at 3 ohms,
1 kHz, 1 % THD)
Surround mode (reference) RMS output power
FL/FR/C/SL/SR*: 143 watts
(per channel at 3 ohms, 1
kHz, 10 % THD)
SL/SR*: 100 watts (with
SA-TS76W/SS-TS75)
Subwoofer*: 285 watts (at
1.5 ohms, 80 Hz, 10 %
THD)
* Depending on the sound field settings and the source,
there may be no sound output.
First 3
characters of
the service
number
Cause and/or corrective action
C 13
The disc is dirty.
,Clean the disc with a soft cloth
(page 91).
C 31
The disc is not inserted correctly.
,Restart the system, then re-insert
the disc correctly.
E XX
To prevent a malfunction, the
(xx is a number) system has performed the selfdiagnosis function.
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5character service number.
Example: E 61 10
When displaying the version
number on the TV screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
VER.X.XX
96GB
Inputs (Analog)
TV (AUDIO IN)
Sensitivity: 450/250 mV
SAT/CABLE (AUDIO IN)Sensitivity: 450/250 mV
AUDIO IN
Sensitivity: 250/125 mV
Inputs (Digital)
SAT/CABLE (COAXIAL IN/OPTICAL IN)
Impedance: 75 ohms/–
Outputs (Analog)
Phones
Accepts low-and highimpedance headphones.
DVD system
Laser
Signal format system
Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
PAL/NTSC
Tuner section
System
FM tuner section
Tuning range
North American models:
PLL quartz-locked digital
synthesizer
87.5-108.0 MHz (100 kHz
step)
Other models:
87.5-108.0 MHz (50 kHz
step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
North American, Mexican, and Latin American
models:
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,710 kHz (with the
interval set at 9 kHz)
European, Russian, and Middle Eastern models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
Australian and New Zealand models:
531 – 1,710 kHz (with the
interval set at 9 kHz)
530 – 1,710 kHz (with the
interval set at 10 kHz)
Other models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,610 kHz (with the
interval set at 10 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Mass (approx.)
Video section
Speaker unit
Rated impedance
Dimensions (approx.)
Outputs
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Speaker system
R/G/B: 0.7 Vp-p 75 ohms
HDMI OUT: Type A (19
pin)
Power requirements
Power consumption
Two way, Bass reflex,
magnetically shielded
Woofer: 65 mm dia, cone
type × 2
Tweeter: 50 mm dia, cone
type
3.0 ohms
111 × 827 × 75 mm (w/h/d)
316 × 1,041 - 1,339 × 316
mm (w/h/d) with stand
2.3 kg
4.6 kg with stand
Closed, magnetically
shielded
30 × 60 mm, cone type
3.0 ohms
381 × 48 × 62 mm (w/h/d)
0.5 kg
Bass reflex, magnetically
shielded
65 mm dia, cone type
3.0 ohms
111 × 827 × 75 mm (w/h/d)
316 × 1,041 - 1,339 × 316
mm (w/h/d) with stand
1.7 kg
4.2 kg with stand
Subwoofer (SS-WS73)
Mass (approx.)
Center (SS-CT72)
Speaker system
Speaker system
Bass reflex, magnetically
shielded
160 mm dia, cone type
1.5 ohms
197 × 322 × 345 mm
(w/h/d)
5.6 kg
General
220 – 240 V AC, 50/60 Hz
On: 180 W
Standby: 0.3 W (at the
Power Saving mode)
Output voltage (DIGITAL MEDIA PORT)
DC 5 V
Output current (DIGITAL MEDIA PORT)
700 mA
Dimensions (approx.)
430 × 63 × 380 mm (w/h/d)
incl. projecting parts
Mass (approx.)
4.2 kg
AC adaptor (AC-SD1)
Power requirements
220 – 240 V AC, 50/60 Hz
Power consumption
On: 40 W
Output voltage
DC 28.0 V
Output current for SA-TS76W
1.5 A (maximum current is
8 A)
Dimensions (approx.)
249 × 45 × 82 mm (w/h/d)
265 × 45 × 82 mm (w/h/d)
with cord
Mass (approx.)
0.8 kg
Surround (L) (SA-TS76W)
Design and specifications are subject to change
without notice.
Speaker system
Unpacking
Speaker unit
Rated impedance
Dimensions (approx.)
Bass reflex, magnetically
shielded
65 mm dia, cone type
3.0 ohms
111 × 827 × 75 mm (w/h/d)
316 × 1,041 - 1,339 × 316
mm (w/h/d) with stand
Additional Information
Speaker system
Surround (R) (SS-TS75)
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
Speakers
Front (SS-TS74)
2.2 kg
4.7 kg with stand
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
continued
97GB
• FM wire antenna (aerial) (1)
• Speaker cords (6, red/white/green/gray/blue/purple)
• Speaker cords (OPTION) (2, gray/blue)*
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
• Posts (4)
• Bases (4)
• Mounting plates (4)
• Post covers (4)
• Screws (large, with washer) (16)
• Screws (small, silver) (8)
• Screws (small, black) (4)
• IR transmitter (1)**
• AC adaptor (1)
• Operating Instructions
• HDMI CONTROL Guide
• Speaker and TV connections (card)
* Use for connecting the surround speakers to the
system by the speaker cords.
** The IR transmitter cord is for this system only. You
cannot use a commercially available extension cord.
•Standby power consumption 0.3 W (or
less).
•Halogenated flame retardants are not
used in the printed wiring boards.
•Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.
98GB
Glossary
Album
Section of a music piece or an image on a data
CD containing MP3 audio tracks or JPEG files.
Chapter
Subdivision of a title on a DVD. A title is
composed of several chapters.
Digital Cinema Auto Calibration
Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjusts
the speaker settings to your listening
environment in a short period of time.
Digital Direct Twin Drive Subwoofer
Utilizing Sony's proprietary S-Master
technology, the Digital Direct Twin Drive
Subwoofer features two S-Master Digital
Amplifiers that provide dedicated power to a
strategically located subwoofer for astounding
sound performance. Easy to set up, Digital
Direct Twin Drive Subwoofer provides a stable
sound field over a much larger listening area
without having to adjust frequency levels.
Digital Infrared Audio Transmission
Recent times have been witness to the rapid
spread of DVDs, Digital Broadcasting Satellite
Receiver and other high-quality media. In order
to ensure that the subtle nuances endowed by
these high-quality media would be transmitted
with no accompanying deterioration, Sony
developed a technology called “Digital Infrared
Audio Transmission” for the infrared
transmission of digital audio signals using no
compression, and it introduced it into the
system.
This technology transfers digital audio signals
using no compression inside the subcarrier
frequency band allocated by the IEC
(International Electronic Committee) and
JEITA (Japan Electronics and Information
Technology Industries Association) for hi-fi
audio transmission applications. (See Fig. 1)
x Music mode
Analog
transmission
Digital transmission (Digital
Infrared Audio Transmission)
The Music mode is for use with any stereo music
recordings, and provides a wide and deep sound
space.
Dolby Surround Pro Logic
L
2
R
3
4
5
6 [MHz]
Fig. 1 Signal spectrum for digital infrared audio
transmission
DivX®
Digital video technology created by DivX, Inc.
Videos encoded with DivX technology are
among the highest quality with a relatively small
file size.
Dolby Digital
Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
x Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
DTS
Digital audio compression technology
developed by DTS, Inc. This technology
conforms to 5.1-channel surround. This format
comprises of stereo rear channel and there is
discrete subwoofer channel in this format. DTS
provides the same 5.1 discrete channels of high
quality digital audio. The good channel
separation is realized due to the all channel data
being recorded discretely and processed in
digitally.
DVD
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same as
a CD.
The data capacity of a single-layer and singlesided DVD, at 4.7 GB (Giga Byte), is 7 times
that of a CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD is 8.5 GB, a
single-layer and double-sided DVD 9.4 GB, and
a dual-layer and double-sided DVD 17 GB.
The picture data uses the MPEG 2 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also
uses the variable rate coding technology that
processes allocated data according to the status
of the picture.
The audio data is recorded in Dolby Digital as
well as in PCM, allowing you to enjoy more
realistic audio presence.
Furthermore, various advanced functions such
as the multi-angle, multilingual, and Parental
Control functions are provided with the DVD.
Additional Information
This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
As one method of decoding Dolby Surround,
Dolby Surround Pro Logic produces four
channels from 2 channel sound. Compared with
the former Dolby Surround system, Dolby
Surround Pro Logic reproduces left-to-right
panning more naturally and localizes sounds
more precisely. To take full advantage of Dolby
Surround Pro Logic, you should have one pair of
surround speakers and a center speaker. The
surround speakers output monaural sound.
continued
99GB
DVD+RW
Multilingual function
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
format that is comparable to the DVD VIDEO
format.
Several languages for the sound or subtitles in a
picture are recorded on some DVDs.
DVD-RW
A DVD-RW is a recordable and rewritable disc
that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO,
while discs created in VR (Video Recording)
mode allow the contents to be programmed or
edited.
File
A JPEG image or a DivX video recorded on a
DATA CD/DATA DVD. (“File” is an exclusive
definition for this system.) A single file consists
of a single image or movie.
Film based software, Video based
software
DVDs can be classified as Film based or Video
based software. Film based DVDs contain the
same images (24 frames per second) that are
shown at movie theaters. Video based DVDs,
such as television dramas or sit-coms, displays
images at 30 frames (or 60 fields) per second.
HDMI (high-definition multimedia
interface)
HDMI is an interface that supports both video
and audio on a single digital connection,
allowing you to enjoy high quality digital
picture and sound. The HDMI specification
supports HDCP (High-bandwidth Digital
Contents Protection), a copy protection
technology that incorporates coding technology
for digital video signals.
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country. The limitation
varies from disc to disc; when it is activated,
playback is completely prohibited, violent
scenes are skipped or replaced with other scenes
and so on.
PCM (Pulse Code Modulation)
A method for converting analog audio to digital
audio. It is used for the Compact Disc (CD)
audio format.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0)
to control playback.
By using menu screens recorded on VIDEO
CDs with PBC functions, you can enjoy playing
simple interactive programs, programs with
search functions, and so on.
Progressive format
(sequential scanning)
In contrast to the Interlace format, the
progressive format can reproduce 50 - 60 frames
per second by reproducing all scanning lines
(525 lines for the NTSC system, 625 lines for the
PAL system). The overall picture quality
increases and still images, text and horizontal
lines appear sharper. This format is compatible
with the 525 or 625 progressive format.
Region Code
A coding system to compress digital audio
signals. MPEG-1 is used for MP3 (MPEG-1
Audio Layer-3). MPEG-2 is used for one of the
audio format of DVD.
This system is used to protect copyrights. A
region number is allocated on each DVD system
or DVD disc according to the sales region. Each
region code is shown on the system as well as on
the disc packaging. The system can play discs
that match its region code. The system can also
play discs with the “ ” mark. Even when the
region code is not shown on the DVD, the region
limit may still apply.
Multi-angle function
Scene
Various angles of a scene, or viewpoints of the
video camera are recorded on some DVDs.
On a VIDEO CD with PBC (playback control)
functions, the menu screens, moving pictures
and still pictures are divided into sections called
“scenes.”
MPEG audio
100GB
Parental Control
ALL
Title
The longest section of a picture or music feature
on a DVD, movie, etc., in video software, or the
entire album in audio software.
Track
Section of a picture or a music piece on a
VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
VIDEO CD
Additional Information
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/140 of its original size. Consequently, a
12 cm VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio data.
Sounds outside the range of human hearing are
compressed while sounds we can hear are not
compressed. VIDEO CDs can hold six times the
audio information of conventional audio CDs.
There are two versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution still
pictures and enjoy PBC functions.
This system conforms to both versions.
101GB
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;
Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian;
Lettish
1345 Malagasy
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
1506
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)Oromo
Oriya
Punjabi
Polish
Pashto;
Pushto
Portuguese
Quechua
RhaetoRomance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
SerboCroatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
1703 Not specified
Parental Control Area Code List
102GB
Code Area
Code Area
Code Area
Code Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2528
2184
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
United
Kingdom
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front panel
G VOLUME control (34)
B A (open/close) (34)
H PHONES jack (34)
C Disc operation (34)
I AUDIO IN/A.CAL MIC jack (22, 32)
D FUNCTION (34)
J Disc tray (34)
E Front panel display (105)
F
(remote sensor) (8)
Additional Information
A "/1 (on/standby) (34)
continued
103GB
Rear panel
SPEAKER
FRONT R
FRONT L
SUR R
COAXIAL
SUR L
CENTER
AM
DMPORT
SAT /
CABLE
DIR-T1
SPEAKER
WOOFER
DIGITAL IN
FM75
R AUDIO IN L
EURO AV
(DVD ONLY)
OUT
(DVD ONLY)
COAXIAL
OPTICAL
SAT/CABLE
P B/C B
P R/C R
OUTPUT(TO TV)
A SPEAKER jacks (16)
H COMPONENT VIDEO OUT jacks (28)
B DIR-T1 jack (16)
C SAT/CABLE (AUDIO IN R/L) jacks (32)
I SAT/CABLE (DIGITAL IN OPTICAL)
jack (32)
D DMPORT (DIGITAL MEDIA PORT) jack
(32, 72)
J SAT/CABLE (DIGITAL IN COAXIAL)
jack (32)
E AM terminal (16)
K HDMI OUT jack (28)
F COAXIAL FM 75Ω jack (16)
G EURO AV T OUTPUT (TO TV) jack (16)
104GB
Y
COMPONENT VIDEO OUT
Front panel display
About the indications in the front panel display
A Lights up when the HDMI OUT jack is
correctly connected to HDCP (highbandwidth digital content protection)
compliant device with HDMI or DVI
(digital visual interface) input. (28)
J Lights up when the child lock function
is set to on. (73)
B Lights up when the time information of
a title or chapter appears in the front
panel display. (DVD only) (51)
L Indicates the selected [SPEAKER
FORMATION]. (77)
C Lights up when an NTSC disc is
loaded.
E Stereo/Monaural effect (Radio only)
(65)
F Lights up when the sleep timer is set.
(70)
G Lights up when the movie or music
mode is selected. (37)
M Lights up when Digital Cinema Sound
(DCS) is activated. (38)
N Current surround format (Except for
JPEG)
O Lights up when the DYNAMIC BASS is
selected. (70)
P Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
H Playing status (DVD function only)
Additional Information
D Lights up when a station is received.
(Radio only) (64)
K Lights up when the system outputs
progressive signals (DVD function
only). (30)
I Current repeat mode (47)
continued
105GB
AC adaptor
A Speaker system cord (9)
C POWER (ON/OFF) (21)
B POWER indicator (21)
D AC power cord (19)
Surround speaker (L)
A IR receiver (21)
B IR status indicator (21)
106GB
Guide to the Control Menu Display
DISPLAY
Use the Control Menu display to select a function and to view related information. Press
repeatedly to turn on or change the Control Menu display as follows:
DISPLAY
Control Menu display
The Control Menu display 1 and 2 will show different items depending on the disc type. For details
about each item, see the pages in parentheses.
Additional Information
, Control Menu display 1
m
Control Menu display 2 (appears for certain discs only)
m
Control Menu display off
Example: Control Menu display 1 when playing a DVD VIDEO.
continued
107GB
Currently playing title number1)
Currently playing chapter number2)
Total number of titles1)
Total number of chapters2)
Control Menu items
12 (27)
18 (34)
T
1:32:55
Selected item
Function name of
selected Control
Menu item
DVD VIDEO
Playback status
(N Playback,
X Pause,
x Stop, etc.)
Type of disc being
played3)
Playing time4)
OFF
OFF
DISC
TITLE
CHAPTER
Current setting
Options
REPEAT
ENTER
Quit:
DISPLAY
Operation message
1) Displays
the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for
DATA CDs/DATA DVDs. DivX video album number for DATA CDs/DATA DVDs.
2)
Displays the index number for VIDEO CDs, MP3 audio track number, or JPEG image file number for DATA CDs/
DATA DVDs. DivX video file number for DATA CDs/DATA DVDs.
3)
Displays Super VCD as “SVCD.” Displays “MP3” in the Control Menu display 1 or “JPEG” in the Control Menu
display 2 for DATA CDs/DATA DVDs.
4)
Displays the date for JPEG files.
To turn off the display
Press
DISPLAY.
List of Control Menu items
Item
Item Name, Function, Relevant Disc Type
[TITLE] (page 42)/[SCENE] (page 42)/[TRACK] (page 42)
Selects the title, scene, or track to be played.
[CHAPTER] (page 42)/[INDEX] (page 42)
Selects the chapter or index to be played.
[TRACK] (page 42)
Selects the track to be played.
[ORIGINAL/PLAY LIST] (page 50)
Selects the type of titles (DVD-RW/DVD-R) to be played, the [ORIGINAL] one, or an edited
[PLAY LIST].
[TIME/TEXT] (page 42)
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the MP3 track name.
108GB
[SPEAKER FORMATION] (pages 77, 79)
Sets the speaker formation./Adjust the level of each speaker automatically.
[PROGRAM] (page 44)
Selects the track to play in the order you want.
[SHUFFLE] (page 46)
Plays the track in random order.
[REPEAT] (page 47)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album
repeatedly.
[A/V SYNC] (page 54)
Adjusts the delay between the picture and sound.
[PARENTAL CONTROL] (page 74)
Sets to prohibit playback on this system.
[SETUP] (page 81)
[QUICK] Setup (page 22)
Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of
the TV, speaker formation, and choose yes or no to start the Auto Calibration.
[CUSTOM] Setup
In addition to the Quick Setup setting, you can adjust various other settings.
[RESET]
Returns the settings in [SETUP] to the default setting.
[ALBUM] (page 42)
[FILE] (page 42)
Selects the JPEG image file or DivX video file* to be played.
*
[DATE] (page 53)
Displays the date the picture was taken by a digital camera.
*
[INTERVAL] (page 59)
Specifies the duration for which the slides are displayed on the TV screen.
*
[EFFECT] (page 60)
Selects the effects to be used for changing slides during a slide show.
*
Additional Information
Selects the album to be played.
[MODE (MP3, JPEG)] (page 59)
Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both (AUTO)
to be played when playing a DATA CD/DATA DVD.
* These items are not displayed when playing a DATA CD/DATA DVD with DivX video file.
Tip
• The Control Menu icon indicator lights up in green
when you select any item except [OFF]
t
([PROGRAM], [SHUFFLE], [REPEAT], and [A/V SYNC] only). The [ORIGINAL/PLAY LIST] indicator lights
up in green when you select [PLAY LIST] (default setting).
109GB
DVD Setup Display List
You can set the following items with the DVD Setup Display.
The order of the displayed items may be different from the actual display.
LANGUAGE SETUP
CUSTOM SETUP
HDMI
CONTROL
STB
SYNCHRO
PAUSE
MODE
TRACK
SELECTION
MULTI-DISC
RESUME
OSD*
MENU*
AUDIO*
SUBTITLE*
AUDIO DRC
AUDIO
(HDMI)
DivX
SCREEN SETUP
TV TYPE
YCBCR/RGB (HDMI)
SCREEN SAVER
BACKGROUND
LINE
4:3 OUTPUT
OFF
STANDARD
MAX
OFF
ON
SPEAKER SETUP
16:9
4:3 LETTER
BOX
4:3 PAN SCAN
YCBCR
RGB
ON
OFF
JACKET
PICTURE
GRAPHICS
BLUE
BLACK
VIDEO
RGB
FULL
NORMAL
CONNECTION
FRONT
CENTER
SUBWOOFER
L
R
CENTER
SUBWOOFER
L
R
YES
YES
NONE
YES
NONE
YES
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
L
R
CENTER
SUBWOOFER
L
R
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
SURROUND
DISTANCE
(FRONT)
DISTANCE
(SURROUND)
LEVEL
(FRONT)
LEVEL
(SURROUND)
TEST TONE
* Select the language you want to use from the displayed language list.
110GB
OFF
ON
OFF
ON
AUTO
FRAME
OFF
AUTO
ON
OFF
OFF
ON
System Menu List
You can set the following items with SYSTEM MENU on the remote.
System menu
MEMORY1)
FM MODE2)
NAME IN1)
SLEEP
DIMMER
MEMORY 1-20 (FM), MEMORY 1-10 (AM)
STEREO
MONO
SLEEP OFF, SLEEP 90M-1M
DIMMER OFF
DIMMER ON
DEMO
DEMO ON
DEMO OFF
ATTENUATE3)
ATT ON
ATT OFF
REV OFF
REV ON
OFF
ON
SL SR REV
CHILD LOCK
1)Appears
during “TUNER FM” or “TUNER AM” only.
2)Appears
during “TUNER FM” only.
“ATTENUATE” may not appear, depending on the selected function.
Additional Information
3)
111GB
Index
Numerics
16:9 83
4:3 LETTER BOX 83
4:3 OUTPUT 84
4:3 PAN SCAN 83
5.1 Channel Surround 49
A
A/V SYNC 54
ALBUM 42
Album 98
ANGLE 53
ATTENUATE 36
AUDIO 83
AUDIO (HDMI) 86
AUDIO DRC 86
Auto Calibration 79, 98
B
BACKGROUND 84
Batteries 8
C
CHAPTER 42
Chapter 98
Child Lock 73
CINEMA STUDIO EX 39
COAXIAL (Digital Out) 33
COLD RESET 89
COMPONENT VIDEO OUT
30
Continuous play 34
Control Menu Display 107
Controlling the TV 67
CUSTOM 81
CUSTOM PARENTAL
CONTROL 74
CUSTOM SETUP 85
D
D. C. A. C. 79, 98
DATA CD 57, 61
DATA DVD 57, 61
DEMO 25
Demonstration 25
Digital Cinema Auto
Calibration 79, 98
Digital Cinema Sound 39
Digital connection 33
Digital Direct Twin Drive
Subwoofer 98
112GB
Digital Infrared Audio
Transmission 98
DIGITAL MEDIA PORT 72
DIMMER 71
DISPLAY 66
DivX® 61, 86, 99
Dolby Digital 48, 99
Dolby Pro Logic II 99
Dolby Surround Pro Logic 99
DTS 48, 99
DUAL MONO 40
DVD 99
DVD+RW 100
DVD’s menu 48
DVD-RW 50, 100
DVI 29
DYNAMIC BASS 70
E
EFFECT 60
F
Fast forward 41
Fast reverse 41
FILE 42
File 100
Film based software 100
FM MODE 65
Freeze Frame 41
Front panel 103
Front panel display 51, 105
H
Handling discs 91
HDMI
YCBCR/RGB (HDMI) 84
HDMI (high-definition
multimedia interface) 29, 100
HDMI CONTROL 85
I
INDEX 42
Installing the speakers and the
IR transmitter on a wall 26
Instant Advance 35
Instant Replay 35
INTERLACE 31
INTERVAL 59
IR transmitter 21, 26
J
JPEG 55, 57
L
Language Code List 102
LANGUAGE SETUP 83
LINE 84
Listening
a particular point on a disc 41
other components 35
TV sound 36
M
MENU 83
MODE (MP3, JPEG) 59
MOVIE/MUSIC 37
MP3 55, 57
MPEG audio 100
Multi Session CD 6
Multi-angle function 53, 100
MULTI-DISC RESUME 85
Multilingual function 100
Multiplex broadcast sound 40
MUTING 35
N
Naming preset stations 65
O
OPTICAL (Digital Out) 33
ORIGINAL 50
OSD 83
Other component connection
32
P
PARENTAL CONTROL 75
Parental Control 100
PAUSE MODE 85
PBC Playback 63
PCM (Pulse Code Modulation)
100
PICTURE NAVI 43, 58
PLAY LIST 50
Playback Control (PBC) 100
Program Play 44
PROGRESSIVE 31
Progressive format 30, 100
Q
Quick Setup 22
R
V
Radio 65
Radio Stations 64
RDS 66
Rear Panel 104
Region Code 6, 100
Remote 8, 67
Repeat Play 47
RESET 82
Resume Play 43
VIDEO CD 101
W
Wireless 21
S
Scan 41
SCENE 42
Scene 100
SCREEN SAVER 84
SCREEN SETUP 83
Searching 41
Selecting 37
SETUP 81
Setup Display 81, 110
Shuffle Play 46
SL SR REV 21
SLEEP 70
Slide Show 59
Slow-motion Play 41
Sound Field 38
SPEAKER FORMATION 77
SPEAKER SETUP 86
CONNECTION 86
DISTANCE 87
LEVEL 87, 88
STB SYNCHRO 85
SUBTITLE 54, 83
SYSTEM MENU 25, 36, 65,
70, 71, 73
System menu list 111
T
TEST TONE 88
THEATRE SYNC 68
TIME/TEXT 42
TITLE 42
Title 101
TRACK 42
Track 101
TRACK SELECTION 85
Troubleshooting 91
TV connection 28
TV TYPE 83
U
Unpacking 97
Usable discs 5
113GB
Remote control
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
A–O
P–Z
ANGLE 4 (53)
AUDIO** es (48)
CLEAR ed (42, 66, 68, 82)
D.TUNING wd (65)
DISPLAY wa (51, 66)
DVD MENU 5 (48, 61)
DVD TOP MENU ea (48)
DYNAMIC BASS ws (70)
ENTER* 3 (22, 25, 36, 42, 64,
74)
FUNCTION +/– 2 (30, 34, 35,
43, 64, 77)
MOVIE/MUSIC ef (37)
MUTING wj (34)
Number buttons** qh (42, 65, 67,
74)
PICTURE NAVI qg (43, 68)
PRESET +/– 7 qs (65)
SLEEP eg (70)
SOUND FIELD +/–** 9 (36,
38)
SUBTITLE wd (54)
SYSTEM MENU 6 (25, 36, 71,
111)
THEATRE SYNC w; (69)
TOOLS 6 (67)
TUNING +/– wg wl (64)
TV qa (67)
TV CH +/–** 9 (67)
TV INPUT qk (67)
TV MENU e; (67)
TV VOL +/– q; (67)
VIDEO FORMAT qj (30)
VOLUME +/– q; (34, 65, 88)
[/1 (on/standby) 1 (22, 25, 34,
43, 65)
TV [/1 (on/standby) eh (67)
qf (22, 25, 36, 42,
C/X/x/c/
64, 74)
REPLAY/
ADVANCE wf (34)
./> qs 7 (34)
m/M wl wg (41)
/
wl wg (41)
H (play)** 8 (34, 43, 75)
x (stop) wh (35, 43, 74)
X (pause) wk (35)
Z (open/close) ql (35)
DISPLAY e; (24, 42, 74,
107)
O RETURN qd (43)
-/-- ed (68)
* The ENTER button is the same
function as the
button.
** The H, number 5, AUDIO,
and SOUND FIELD + (TV CH
+) buttons have tactile dots.
Use the tactile dots as
references when operating the
system.
(1)
Sony Corporation Printed in China

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement