Overhead Monitor Alpine PKG

Overhead Monitor Alpine PKG
(044)361-05-06
ICQ:495-089-192
(067)469-02-12
ICQ:613-211-859
(099)048-99-03
(093)672-77-76
User's Manual
Overhead Monitor Alpine PKG-2100P with DVD
In the online store Winauto you also can buy Rear Seat Monitor Alpine PKG-2100P . Delivery in Kiev and throughout
Ukraine with payment upon receipt!
http://winauto.ua
Car Receivers - Facia Plates - Head Units - Car TVs and Monitors - Antennas - Car Audio - DVR - GPS Navigation - Trip Computers - Alarm
Systems - Mechanical Locking - Parking Systems - Car Cameras - Optics and Light - Established Optics - Tuning - Car Heating and Cooling - Sound
Marine and Electronics - Car Accessories - Isolation - Installation Components - Batteries, Power - Oils and Fluids -
Car audio and car goods internet store Winauto
EN
R
DVD Entertainment System
w
in
au
to
.
ua
PKG-2100P
OWNER'S MANUAL
Please read before using this equipment.
ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY, LTD.
ALPINE ELECTRONICS FRANCE S.A.R.L.
1-1-8 Nishi Gotanda
Shinagawa-ku
Tokyo 141-0031, Japan
Phone 03-5496-8231
161-165 Princess Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. paris Nord II,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ELECTRONICS GmbH
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place
Torrance, California 90501 U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
Wilhelm-Wagenfeld-Straße 1-3,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K., LTD.
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road
Toronto, Ontario M3J 2M9 Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE House
Fletchamstead Highway, Coventry CCV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Tel.: 02-725 1315
Designed by Alpine Electronics (Europe) GmbH
Printed In China
w
in
au
to
.
ua
Car audio and car goods internet store Winauto
Car audio and car goods internet store Winauto
ENGLISH
Operating Instructions
WARNING
WARNING .................................................. 3
CAUTION ................................................... 3
PRECAUTIONS ......................................... 4
Discs Playable on This Unit .................... 5
Getting Started
Monitor Setup
Adjusting Picture ............................................. 17
Visual EQ Operation..................................... 17
Adjusting the Brightness .............................. 17
Adjusting the Color Density ......................... 17
Adjusting the Tint ......................................... 18
Adjusting the Contrast .................................. 18
Adjusting the Sharpness ............................... 18
Resetting the Picture Adjustment ................. 18
Setting Audio & Screen ................................... 18
Setting the Source Name .............................. 19
Setting the Auto Level Control ..................... 19
Setting the Screen Modes ............................. 19
Setting the TV System .................................. 19
Setting the Video Signal ............................... 19
Setting System Control.................................... 20
Setting the IR Transmitter ............................ 20
Setting the FM Modulator ............................ 20
Setting the FM Frequency ............................ 20
Setting the Dimmer ...................................... 20
Setting the Dimmer Low Level .................... 20
Setting the Beep............................................ 20
Setting the DVD Auto Play .......................... 20
Resetting to the Factory Default ................... 20
in
au
t
Basic Operations
DVB-T Control .........................................16
o.
When Using the Remote Control ...................... 7
Remote Control Battery Replacement............... 7
Overhead Monitor ............................................. 8
Remote Control ................................................. 8
Key Map of Remote Control Function.............. 9
Slow Motion Playback .................................... 14
Searching by Title/Folder Number .................. 14
Searching Directly by Chapter or Track /
File Number ............................................... 14
Chapter/Track/Title Repeat Playback............. 15
Switching the Audio Tracks ............................ 15
Switching the Angle ........................................ 15
Switching the Subtitles (subtitle language) ..... 15
Displaying the Disc Status .............................. 16
ua
Contents
w
Turning Power ON/OFF.................................. 10
Loading and Unloading Discs ......................... 10
Audio Mute function ....................................... 10
Adjusting the Volume .......................................11
Switching the Source........................................11
Selecting the Backlight Brightness ..................11
Instant Change of Visual EQ ............................11
Device Control
Memorizing Device Control.............................11
Selecting Source Name from Remote
Control ........................................................11
DVD
Playback .......................................................... 12
Stopping Playback (PRE-STOP) ..................... 12
Stopping Playback ........................................... 12
Fast-forwarding/Fast-reversing ...................... 13
Finding the Beginning of Chapters or
Tracks-(Files) ............................................. 13
Displaying a Folder/File Menu List ................ 13
Selecting Folders ............................................. 13
Pausing ............................................................ 13
Frame-by-frame Playback .............................. 14
1-EN
Car audio and car goods internet store Winauto
o.
SETUP Operation ............................................ 21
Setting items ................................................. 21
Setting the Language .................................... 21
Setting the Country Code ............................. 22
Setting the Rating Level (Parental Lock) ..... 22
Change the Password.................................... 22
Playing back a Main Story directly .............. 22
Setting the Rating Level (Parental Lock) ..... 22
Switching the Background Colour ............... 22
Setting the TV Screen ................................... 23
Setting the TV System .................................. 23
Returning to the Initial Setting ..................... 23
Playing MP3/DivX® Data ............................. 23
Setting Compression Playback Data ............ 23
Setting Playback simultaneously .................. 23
Setting Time for Still Image Playback ......... 23
Setting the Display ....................................... 24
ua
DVD Player Setup
Wireless Headphone
in
au
t
Setting for DivX® video on demand ............. 24
w
Headphone Receivers ...................................... 24
Operation ......................................................... 24
Battery Installation .......................................... 24
Installation and Connections
WARNING
WARNING ................................................ 25
CAUTION ................................................. 25
PRECAUTIONS ....................................... 25
Connections ..................................................... 26
Mount Side ...................................................... 27
Dome Light Wire............................................. 27
System Connections ........................................ 28
Information
List of Language Codes................................... 29
List of Country Codes ..................................... 30
In Case of Difficulty ........................................ 32
System Indication ............................................ 33
Accessories ...................................................... 34
2-EN
Car audio and car goods internet store Winauto
Operating Instructions
WARNING
INSTALL THE PRODUCT CORRECTLY SO THAT
THE DRIVER CANNOT WATCH TV/VIDEO UNLESS
THE VEHICLE IS STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
It is dangerous (and illegal in many states) for the driver to
watch the TV/Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could occur. If the
product is not installed correctly, the driver will be able to watch
the TV/Video while driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or other people
could be severely injured.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
o.
DO NOT MIX NEW BATTERIES WITH OLD
BATTERIES. INSERT WITH THE CORRECT BATTERY
POLARITY.
in
au
t
Failure to do so may result in an accident.
ua
Any function that requires your prolonged attention should only
be performed after coming to a complete stop. Always stop the
vehicle in a safe location before performing these functions.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead
of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
When inserting the batteries, be sure to observe proper polarity (+
and –) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.
w
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do so
may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
CAUTION
CAUTION – Laser radiation when open – DO NOT
STARE INTO BEAM.
(Bottom side of player)
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V
APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
3-EN
Car audio and car goods internet store Winauto
Inserting Discs
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For
more severe stains, please dampen the cloth with water only.
Anything else has the chance of dissolving the paint or damaging
the plastic.
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
Press to eject any disc that is inserted incorrectly.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Temperature
New Discs
Do not operate your unit in ambient temperature above +70°C
(+158°F) or below -20°C (-4°F).
As a protective measure to prevent the disc from jamming, press
to eject any disc with irregular surface or inserted incorrectly.
When a new disc is inserted into the player and ejected after
initial loading, using your finger, feel around the inside of the
center hole and outside edge of the disc. If you feel any small
bumps or irregularities, this could inhibit proper loading of
the disc. To remove the bumps, rub the inside edge of the hole
and outside edge of the disc with a ball-point pen or other such
instrument, then insert the disc again.
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player
and wait about an hour for the moisture to evaporate.
Fuse Replacement
When replacing the fuse(s), the replacement must be of the same
amperage as shown on the fuse holder. If the fuse(s) blows more
than once, carefully check all electrical connections for shorted
circuitry. Also have your vehicle’s voltage regulator checked.
Center
CenterHole
Hole
ua
Moisture Condensation
Center
Hole
Center
Hole
Damaged Disc
Maintenance
(Bumps)
Bumps
Irregular Shaped Discs
Characteristics of LCD Panel
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
in
au
t
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
w
• After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to LCD
technology and is normal.
• Under cold temperature conditions, the screen may lose
contrast temporarily. After a short warm-up period, it will
return to normal.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel ratio
is over 99.99%. This means that 0.01% of the pixels could be
either always ON or OFF.
Using Wireless Headphones
If ACC or the monitor's power source is turned off, a loud noise
is produced through the headphones. Be sure to remove the
wireless headphones from your ears before you turn the monitor
off.
Installation Location
Make sure the PKG-2100P will not be installed in a location
subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will
not leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
Never Attempt the Following
CORRECT
CORRECT
Do not grip or pull out the disc while it is being pulled back into
the player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power
is off.
INCORRECT
NCORRECT
INCORRECT
4-EN
Outside
Outside
(Bumps)
Bumps
o.
Do not attempt to play cracked, warped, or damaged discs.
Playing a bad disc could severely damage the playback
mechanism.
New
New
Disc
Disc
CORRECT
CORRECT
Car audio and car goods internet store Winauto
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause
the DVD player to skip. For routine cleaning, wipe the playing
surface with a clean, soft cloth from the center of the disc to the
outer edge. If the surface is heavily soiled, dampen a clean, soft
cloth in a solution of mild neutral detergent before cleaning the
disc.
Disc Accessories
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness and/or
diameter of the disc. Using such accessories can cause
operational problems. We recommend not using these accessories
on discs played in Alpine DVD players.
Discs Playable on This Unit
Playable discs
The discs listed below can be played on this unit.
Mark (logo)
Recorded content
Disc size
DVD Video
Audio
+
Video
12 cm*
Music CD
Audio
12 cm
DivX®
Audio
+
Video
12 cm
ua
* Two-layer DVD disc compatible
CD-R/
CD-RW
DVD+R/
DVD+RW
CD Format
{
{
{
{
{
{
{
{
{
JPEG Format
(“jpg”, “jpeg”, “jpe”)
DVD Video Format
w
DVD-R/
DVD-RW
MP3 Format
(“mp3”)
in
au
t
Transparent
Transparent
T
Transpar
entSheet
Sheet
Disc
Disc Stabilizer
Stabilizer
o.
The formatted discs listed below can be played on this unit.
DivX Format
(“avi”, “divx”)
{
{
{
ASF Format
(“asf ”)
{
{
{
• Discs that are not finalised cannot be played back.
5-EN
Car audio and car goods internet store Winauto
On handling compact discs (CD/CD-R/CD-RW)
Discs that cannot be played
DVD-ROMs, DVD-RAMs, CD-ROMs, photo CDs, etc.
DVD region number (playable region number)
All discs have a region number. This DVD player will play back
discs fit with each region. Check your region number listed
below.
Region
Countries
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels.
• Clean the disc when it is dusty.
• Make sure that the disc is smooth and flat.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
All Regions
Using DVD-Rs/DVD-RWs
Europe, including France,
Greece, Turkey, Egypt,
Arabia, Japan and South
Africa
in
au
t
Australia and New Zealand, Mexico, the Caribbean and South America
o.
Korea, Thailand, Vietnam,
Borneo and Indonesia
ua
United States of America,
Canada
• This unit is compatible only with discs recorded in the DVD-Video
mode. Discs recorded in the DVD-VR mode cannot be played back.
• Note that discs not finalized (processed to enable to play on playbackonly DVD players) cannot be played on this DVD player.
• Some discs may not play back, depending on the recording device.
(This unit has a copy protection function. Discs copied illegally will not
be played back. Some files recorded by a software using an improper
recording system may be recognized as illegally copied.)
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs, flawed
discs, dirty discs, when the pickup lens of this DVD player is dirty, or
when moisture condensation has occurred inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVD-RWs
discs.
• Do not put stickers, seals, or tape on the label side of DVD- Rs/
DVD-RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs are more affected
by heat, moisture, and direct sunlight. If left in a car, etc., damage may
occur and it might not play on this unit.
India, Africa, Russia and
former USSR countries
Using compact discs (CD/CD-R/CD-RW)
w
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/JPEG/ASF/
DivX® formatted audio files.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit),
discs recorded under unstable conditions, discs on which
a recording failed or a re-recording was attempted, copyprotected CDs which do not conform to the audio CD industry
standard.
• Use discs with MP3/JPEG/ASF/DivX® files written in a
format compliant with this unit. For details, MP3: see pages
17 and 18, DivX®/JPEG/ASF see page 28.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again
6-EN
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units
of division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by Rovi
Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
• “DTS” is a registered trademark of DTS, Inc. and “DTS 2.0" is a
trademark of DTS, Inc.
• “MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson”
• “Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right
to use this product in any commercial (i.e. revenue generation) real
time broadcasting (terrestrial, satellite, cable and/or any other media),
broadcasting/streaming via internet, intranets and/or other networks or
in other electronic content distribution systems, such as pay-audio or
audio-on-demand applications. An independent license for such use is
required. For details, please visit http://www.mp3licensing.com”
Car audio and car goods internet store Winauto
3
Getting Started
Closing the cover
Slide the cover as illustrated until a click is heard.
When Using the Remote Control
• Point the remote control at the remote sensor within
about 2 meters.
• It may not be possible to operate the remote control
if the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
1
Opening the battery case
in
au
t
Battery type: AAA battery or equivalent.
o.
Remote Control Battery Replacement
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
ua
When you use Remote Control for the first time, pull the plastic tape
before using the remote control.
w
Pull up the battery cover while pressing in the direction of
the arrow.
2
Replacing the battery
Put the battery in the case with the (+) indication upward
as shown in the illustration.
• Placing a battery in backwards way may cause a
malfunction.
7-EN
Car audio and car goods internet store Winauto
IR Transmitter and Receiver
Overhead Monitor
IR transmitter sends the sound to the Headphone. IR receiver receives
the signal from the remote control.
Eject Button
Eject Button
Pressing Eject button unloads Disc. If the ignition key is set to ACC
or ON, a disc can be removed even when the power is OFF.
Power
Disc-In LED
While a disc is in DVD player and the power is on, Disc-In LED light
turns on.
Disc-In Slot
Disc-In LED
IR Transmitter
and Receiver
Remote Control
RUE-4159 is a universal remote control which works for Built-in
DVD, Overhead monitor and other 5 devices. Refer the key map for
the function buttons of each device. (page 9)
LCD Monitor Panel
Front Passenger
Access Switch
ua
Game Port
Luminance Sensor
7
White LED Dome Light
1
I
B
in
au
t
Dome Light Switch
o.
6
Panel Open Switch
Front Control Keys
A
0
LCD Monitor Panel
Monitor Open Button
w
This is a 10.2 inch, Wide VGA, Active Matrix LCD. In addition, an
Infrared Wireless Headphone Transmitter is located on top of the
LCD panel.
Press Monitor Open Button to release the Monitor Panel. The Panel
will drop down slightly allowing you to fully open to its 90 degree or
greater position. To close, firmly press the LCD Monitor Panel back
up into the housing until a click is heard.
White LED Dome Light
White LED Dome Light connection has polarity. Be cautious when
installing the monitor. Refer to Dome Light Connection (Page 27).
Dome Light Switch
Dome light switch turns on/off the dome light. When the switch is set
to Door, the dome light turns on when the door is open.
Front Control Keys
Blue, back-lit button illuminates when the overhead monitor main
power is on. DVD overhead monitor and other devices can be
controlled by using these buttons.
Front Passenger Control Buttons
:
FM modulator ON/OFF switch
The monitor’s DVD sound is transmitted to the radio’s FM Tuner,
when FM button is on. The radio must be tuned to the proper
frequency. The FM transmitter function in the System menu must be
ON to use the FM modulator.
: Play/pause and power switch
The front passenger can play/pause the DVD. It also allows turning
on the unit. The unit can be turned off by pressing and holding this
switch.
8-EN
K
N
J
V
R
Q
W
X
E
F
3
2
8
5
4
C
D
9
M
L
O
U
P
S
T
Y
G
H
Car audio and car goods internet store Winauto
Key Map of Remote Control Function
RUE-4159 Remote Control Key Assignment
KEY FUNCTION
NUMERIC KEY: 1
NUMERIC KEY: 2
NUMERIC KEY: 3
NUMERIC KEY: 4
NUMERIC KEY: 5
NUMERIC KEY: 6
NUMERIC KEY: 7
NUMERIC KEY: 8
NUMERIC KEY: 9
NUMERIC KEY: 0/10
DVD / DVD-HU / DVB-T / TV= 0, ISDBT=10
NUMERIC KEY: 11 (+10)
DVD / DVD-HU = +10
NUMERIC KEY: 12 (CLR)
DVD= CLR
SETUP
DISP (INFO)
DVB-T= INFO
TOP.M (EPG)
ISDB / DVB-T= EPG
ENTER
MENU (DVD SETUP)
UP: s
DN: t
LT:
RT:
RETURN (EXIT)
ISDB-T=RETURN DVB-T= EXIT
22
23
24
25
26
27
28
29
30
31
32
33
34
35
w
21
TV Tuner
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
ua
MEMORY FOR DEVICE MODE: MEM
15
19
20
DVB-T
(Europe only)
o.
14
18
DVD-HU
in
au
t
MONITOR POWER
DEVICE POWER
MUTE
DIMMER
VISUAL EQ
DVD
AUX1
AUX2
DEVICE MODE: EXT-DVD
DEVICE MODE: DVD-HU
DEVICE MODE: TV TUNER
DEVICE MODE: DVB-T
DEVICE MODE: ISDB-T
17
DVD/
EXE-DVD
3
1
2
3
4
5
6
7
8
9
10
11
12
13
16
OHM
Skip or Fast FW:
Skip or Fast BW:
CHANNEL UP: CH s
CHANNEL DOWN: CH t
PLAY/PAUSE:
STOP: n (BACK)
DVB-T= BACK
SCAN
REPEAT
AUDIO
SUB.T (DATA) (TXT)
ISDB-T= DATA DVB-T= TXT
ANGLE (1SEG)
ISDB-T= 1/13 Seg
+10
+10
CLR
3
3
3
3
3
3
MENU (P&H) *
MENU (P&H) *
3
3
INFO
3
3
EPG
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
EXIT
3
3
Favorite UP
Preset UP
3
3
Favorite DN
Preset DN
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
BACK
3
3
3
TXT
NOTE *: (P&H) Press & Hold
9-EN
Car audio and car goods internet store Winauto
Loading and Unloading Discs
Basic Operations
EJECT
Turn on the power before loading and unloading discs.
POWER
Loading discs
Insert the disc with the label side facing upwards.
Once the disc is partially inserted, it is drawn in automatically.
Playback starts.
Top Front Side
SELECT
Front Control Keys
MUTE
DIMMER
o.
DVD, AUX1,
AUX2
• If the ignition key is on ACC or ON, a disc can be inserted even
when the power is OFF.
• For two-sided DVDs, play one side of the disc to the end, then
unload the disc, turn it over and reload it to play the other side.
• Never insert map discs for navigation purposes as they could
damage the equipment.
• If wrong disc, upside-down discs or dirty discs have been inserted,
“DISC ERROR” is displayed. Press and eject the disc.
ua
POWER
Unloading discs
Press
in
au
t
Visual EQ
MONITOR SETUP
Remote Control
.
Be sure to remove the disc.
Turning Power ON/OFF
Front Control Keys
1
2
w
The power state of the monitor is memorized when Ignition/ACC is
turned off. When Ignition/ACC is turned back on, the monitor returns
to the memorized power state (either ON or OFF), including DVD
playback position. .
Press POWER to turn ON.
To turn off the power, press and hold POWER
again.
• While the power is ON, press POWER to activate the Mute
function.
Remote Control
1
2
• If the disc is not removed within a few moments, it will be reloaded
automatically.
• If the ignition key is set to ACC or ON, a disc can be removed even
when the power is OFF. After removing the disc, the power turns
OFF again automatically.
• During ACC OFF or while the disc is being loaded (“LOADING”
is displayed), the disc will not be ejected even if you press .
Press POWER to turn ON.
To turn off the power, press POWER again
Audio Mute Function
Front Passenger Controls
Front Control Keys
1
2
Press PLAY/PAUSE button to turn ON.
1
To turn off the power, press and hold PLAY/
PAUSE.
While the power is ON, press POWER to activate
the Mute function.
2
Press POWER again turn it OFF the Mute function.
PLAY/PAUSE
10-EN
Remote Control
Press MUTE to turn it ON and OFF.
Car audio and car goods internet store Winauto
Adjusting the Volume
Device Control
Volume can be controlled from the headphone or your own radio
volume function.
1
2
Device modes (TV, DVB-T, ISDB-T, DVD-HU and EXT-DVD) are
available on the remote control by pressing the device control.
Turn on POWER on the headphone.
Adjust the volume level by turning clockwise for
louder and counter-clockwise for lower on the
headphone.
AUX1
Refer to Wireless Headphone (Page 24)
AUX2
Switching the Source
DEVICE BUTTON
(TV, DVB-T, ISDB-T,
DVD-HU and EXT-DVD)
Front Control Keys
Press SELECT to change each source.
MEMORY
Press SELECT to cycle through the different
sources.
Memorizing Device Control
You can map the device function on AUX1 and AUX2. Once the
device is memorized in the source (AUX1 or AUX2), the remote
control will be automatically switched to the memorized device mode
at the next time AUX1 or AUX2 is pressed.
ua
1
2
1
2
Press AUX1 or AUX2.
Select one of following devices you want to assign,
TV/DVB-T/ISDB-T/DVD-HU/EXT-DVD.
in
au
t
Press DVD, AUX1 or AUX2 to change each
source directly.
o.
Remote Control
• OSD (On Screen Display) will be turned off automatically, when
not operating more than 6 seconds.
• To connect the device to AUX1 and AUX2, see page 28.
• When the source is changed, the device remembers the scene where
playback stopped.
• The device mode of the remote control is automatically shifted to
the assigned device, when AUX1 or AUX2 is pressed.
3
Press MEMORY key to store the device on the
source.
• Each step should be made within 6 seconds, otherwise OSD (On
Screen Display) will be automatically turned off.
Selecting Source Name from Remote
Control
The brightness of the LCD panel’s backlighting is adjustable to more
closely match the vehicle’s interior lighting. This makes the screen
easier to view.
When you proceed the above step with the remote control pointed
toward the monitor, the device source name on OSD can be
automatically shifted without entering Setup menu.
w
Selecting the Backlight Brightness
1
2
Press DIMMER.
Press DIMMER to cycle through the OSD as
AUTO, LOW and HIGH. (Default: HIGH)
SOURCE NAME
For setting Dimmer level, refer to page 20.
Instant Change of Visual EQ
1
2
Press V EQ. on the remote control.
Press V EQ. to switch to the different mode.
11-EN
Car audio and car goods internet store Winauto
Insert a disc with the label side facing up.
DVD
To load discs, see “Loading and Unloading Discs” on page 10.
Playback starts.
• The reverse side of a double-sided DVD will not be played
automatically. Remove the disc, turn it over, and reinsert it.
• It may take some time before playback starts after loading a disc.
The instruction includes Built-In DVD, EXT-DVD,
DVD-HD. DVD player can be also used for CD/CDR/CD-RW.
SELECT MENU
n
ENT
DVD Auto Play
Front Control Keys
The main movie will play automatically without pressing Play or
Enter button, when DVD is inserted, if AUTO or SKIP mode is
selected on DVD Auto Play under System menu. See page 20 for
detail.
If a menu screen appears
On DVDs, menu screens may appear automatically, when DVD Auto
Play is set to NORMAL. Perform the operation described below to
start playback.
DVD
FOLDER
UP
MENU
st
DISPLAY
REPEAT
ENTER
DVD menu
FOLDER
DOWN
RETURN
Press s, t, or
press ENTER.
• For some discs it is possible to select items directly from the menu
screen using the number keys (“0” to “9”).
n
Stopping Playback (PRE-STOP)
in
au
t
number
keys
(0 to 9)
CLEAR
+10*1
*2
Remote Control
*1
w
+10 is available for Built-in DVD, EXT-DVD and DVD-HU.
*2
CLEAR is available only for Built-in DVD and EXT-DVD.
Playback
Disc types that can be used for each heading are
represented by the following marks.
DVD Commercial Video discs (used for the distribution of movies, ect.) or a DVD-R/DVD-RW, DVD+R/
DVD+RW recorded in a video mode can be used.
(including discs containing both DVD video and DVD
audio data that are played back when "DVD-V" is set in
"Setting the DVD Audio Playback Mode" (page 20)).
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/DVD+RW
discs that are recorded in the DivX® mode can be used.
Caution
• Not all functions will operate for every DVD. See the individual
DVD’s instructions for details on the features supported.
• Fingerprints on a disc may adversely affect playback. If a
problem occurs, remove the disc and check for fingerprints on
the playback side. Clean the disc if necessary.
• When using the remote control, be careful to press one button
at time. Pressing multiple buttons at the same time may cause
erroneous operation.
• If you switch the power or ignition key OFF during playback,
playback will continue where you left off when you resume
playback.
• If you try to perform an invalid operation (based on the type
of disc being played), the following mark is displayed on the
monitor screen:
12-EN
to select the desired item, then
o.
TOP.M
• For many discs, the menu screen can also be displayed by pressing
MENU.
ua
EXT-DVD
DVD-HU
Press n during playback to stop playback. That position is stored in
memory.
1
Press n during playback.
“PRE-STOP” is displayed.
2
Press
in the PRE-STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may
not be accurate.
Stopping Playback
Press n twice during playback.
“STOP” is displayed, and playback stops.
• Playback starts from the beginning when
playback is stopped.
is pressed while
Car audio and car goods internet store Winauto
Fast-forwarding/Fast-reversing
Displaying a Folder/File Menu List
1
If a file from the folder menu list is selected:
During playback, press and hold
(fast-forward).
or
(fast-reverse)
When pressed for more than 1 second, the disc is
forwarded/reversed at double speed.
When held in 5 more seconds, the disc is forwarded/
reversed at 8 times the normal speed.
When held for 10 more seconds, the disc is forwarded/
reversed at 32 times the normal speed
2
Release
or
to return to normal playback.
1
During playback, press TOP MENU.
The folder list in a disc is displayed.
2
Press s or t to select the desired folder and press
ENT.
The file menu list in the selected folder is displayed.
3
• No sound appears during fast-forward/fast-reverse.
Press s or t to select the desired file and press
ENT.
Playback of the selected file starts.
Finding the Beginning of Chapters or
Tracks-(Files)
If a file from the file menu list is selected:
1
During playback, press MENU.
The file menu list in the disc folder is displayed.
or
.
The chapter/track/file switches each time the button is pressed,
and playback of the selected chapter/track starts.
2
Press s or t to select the desired file and press
ENT.
ua
During playback, press
Playback of the selected file starts.
• If a folder name or file name exceeds the display range, the last
character that appears in the display range is displayed as “~”
(tilda accent).
• MP3 folder/file list is also displayed.
o.
: Press this to start playback from the beginning of
the following chapter or track.
in
au
t
: Press this to start playback from the beginning of
the current chapter or track.
repeatedly to start playback from the
Press
beginning of a previous chapter or track.
w
• Some DVDs do not have chapters.
• MP3 playback information (folder no., file no., tag information,
ect.) will be displayed on the monitor during playback.
• For MP3 discs, some time may be required until playback starts.
• Some discs will not play back depending on the writing or MP3
conversion software used for the disc. In that case, try other
software.
• The unit can play discs containing both audio data and MP3 data.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• JPEG are the same as MP3 controllable from the unit.
Selecting Folders
Press FOLDER DN or UP to select the folder.
Pausing
1
2
During playback, press
Press
.
to resume playback.
• No sound is played during the still mode.
• The image or sound may stop temporarily when playback starts
from the pause mode, This is not a malfunction.
• When
on Front Passenger Control is pressed, blue screen
appears temporarily.
13-EN
Car audio and car goods internet store Winauto
Searching Directly by Chapter or
Track / File Number
Frame-by-frame Playback
In the pause mode, press
or
.
The picture advances or reverses by one frame each time
the button is pressed.
2
Press
to resume normal playback.
Use this function to easily move to the beginning of the chapters or
tracks on the disc.
1
• No sound is played during frame-by-frame playback.
Slow Motion Playback
1
2
2
Press and hold
or
while in the pause
mode to set 1/8 normal speed slow motion
playback mode/reverse slow motion playback
mode. Hold for a further 5 seconds to set half
speed.
Release
playback.
or
to pause, and press
to
o.
When playback stops, input the number of the title/
folder you want to play using the number keys
(“0” to “9”).
Press ENTER.
w
2
Playback starts from the selected title number.
• This function cannot be used on discs on which no title numbers
are recorded.
• Press CLR to delete the last digit in the title number. Press and
hold CLR for at least 2 seconds to clear all title numbers.
• Press RETURN to cancel the title search mode and resume normal
playback.
• The playback starts automatically for two digit title numbers even
if ENTER in procedure 2 is not pressed.
• Playback starts from the beginning of the chapter/track number in
the state of PRE-STOP.
14-EN
• This function cannot be used on discs on which no chapter
numbers are recorded.
• Depending on the number of digits input, playback may start
automatically even if ENTER is not pressed in step 2.
• Press CLR to delete the last digit in the chapter/track number.
Press and hold CLR for at least 2 seconds to clear "Chapter" and
"Track" numbers.
• Press RETURN to cancel the chapter/track search mode and
resume normal playback.
in
au
t
Use this function to easily find positions on the DVD using the
DVD’s title.
1
Press ENTER.
Playback starts from the selected chapter or track.
• No sound is played during slow motion playback/reverse slow
motion playback.
• Slow playback/reverse slow playback is not available when playing
back a slide show.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc
to disc.
Searching by Title/Folder Number
During playback or pre-stop, input the number of
chapter or track you desire by using the number
keys (“0” to “9”).
ua
1
Car audio and car goods internet store Winauto
Repeat Playback
Switching the Audio Tracks
Use this function to play the disc’s titles, chapters or tracks repeatedly.
DVDs can have up to 8 different audio tracks. These alternate tracks
can be switched during playback.
During playback, press REPEAT.
The repeat mode switches each time the button is pressed.
During playback, press AUDIO.
DVD
The sound switches between the alternate audio tracks
recorded on the disc each time the button is pressed.
REPEAT CHAPTER
The chapter is played repeatedly.
REPEAT TITLE
The title is played repeatedly.
REPEAT OFF
The mode returns to normal
playback. (Factory default)
• The selected alternate track becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc's default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
DivX®/MP3
Display example when “ALL” is set in “Setting Compression
Playback Data” (page 23).
Switching the Angle
The file is played repeatedly.
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
REPEAT FOLDER
The folder played repeatedly.
During playback, press ANGLE.
REPEAT DISC
The entire disc is played repeatedly.
The angle switches between the angles recorded on the disc,
each time the button is pressed.
REPEAT OFF
The mode returns to normal
playback. (Factory default)
o.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
in
au
t
CD
ua
REPEAT FILE
The current track is repeatedly
played back.
REPEAT DISC
The entire disc is played repeatedly.
REPEAT OFF
The mode returns to normal.
(Factory default)
w
REPEAT TRACK
• For some discs it is not possible to switch to repeat mode.
M.I.X. (Random Play)
Press M.I.X. in the play or pause mode.
The M.I.X. mode switches each time the button is pressed.
CD
M.I.X.
All tracks on a disc will be played
back in a random sequence, and the
changer will shift to the next disc.
(OFF)
(Factory default)
Switching the Subtitles (subtitle
language)
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
During playback, press SUBTITLE.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
• There may be a delay before the selected subtitle appears.
• No all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD's menu.
• The selected subtitle language becomes the default setting every
time the power is turned on or the disc is replaced. If the disc does
not include that language, the disc's default language is selected
instead.
• For some discs, the subtitles will be displayed even when this is set
to off.
MP3/DivX®
M.I.X. FOLDER
Only files in a folder are played back
in a random sequence.
M.I.X.
All tracks on a disc will be played
back in a random sequence, and the
changer will shift to the next disc.
(OFF)
The mode returns to normal.
(Factory default)
Press M.I.X. again and select OFF to deactivate the M.I.X. play.
15-EN
Car audio and car goods internet store Winauto
Displaying the Disc Status
DVB-T Control
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD on the monitor
screen.
During playback, press DISPLAY.
This function is available only for Europe. To control DVB-T from
the Front Control Keys, set source name to DVB-T in the System
Setup. To set up DVB-T on the remote control, refer to Device
Control. (page 11)
• Refer to TUE-T200DVB, DVB-T Operation Manual for details.
The playback status is displayed.
The playback status display closes when DISPLAY is pressed
again.
MENU
EXIT tsENT
Current disc/title/
chapter number
Playback time
(elapsed time)
Current audio
language/
number
Repeat setting
Current audio
status
Current subtitle
language/number
o.
Current angle
number
Front Control Keys
ua
Playback status
DivX® display example
EPG
st
TV system
(NTSC or PAL)
in
au
t
Playback disc
* Tag information
Current
disc/folder/file
number
Playback time
(elapsed time)
Playback status
MENU
ENTER
INFO
EXIT
CHt
SCAN
FAVORITE t
AUDIO
TXT
number
keys (0 to 9)
CHs
FAVORITE s
BACK
Current subtitle status
* If a DivX® file contains tag information, the file name/album name/
artist name is displayed.
16-EN
DVB-T
Repeat setting
w
Current audio
status
EPG FAVORITE t FAVORITE s
TV system
(NTSC or PAL)
Playback disc
Remote Control
Car audio and car goods internet store Winauto
• “OFF” will change to “CUSTOM”, when any of the picture
mode (Brightness, Color, Tint, Contrast and Sharpness) has been
adjusted
Monitor Setup
• NIGHT MOVIE, SOFT, SHARP and HIGH CONT. are fixed values.
They cannot be set manually. If the picture mode is changed, they
automatically change to CUSTOM mode.
Adjusting Picture
Visual EQ, Brightness, color, tint, contrast and sharpness are
adjustable.
• Each source is independently adjustable.
• Make adjustments within 6 seconds, otherwise the OSD (On Screen
Display) will turn off automatically.
• After adjusting, the “OFF” setting in Visual EQ changes to
“CUSTOM”. After resetting the unit, “CUSTOM” changes back to
“OFF”
1
Press SETUP button on the remote control.
Or press and hold the SELECT button on the Front
Control Keys for at least 2 seconds to open SETUP
screen. The PICTURE setting menu is highlighted.
• To return OFF mode, press RESET on the picture mode, or change
values of BRIGHT, COLOR, TINT, CONTRAST and SHARPNESS
to 0 manually.
3
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Brightness
2
3
Press s or t and select BRIGHT.
Press or to adjust the brightness. Brightness
can be adjusted from –15 (MIN) to +15 (MAX).
o.
Front Control Keys
ua
SELECT
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
in
au
t
4
SETUP
Adjusting the Color Density
Remote Control
w
VISUAL EQ Operation
You can select a mode suitable for the subject image.
2
2
3
4
Press s or t and select COLOR.
Press or to adjust the color density. Change
depth can be adjusted from –15 (MIN) to +15 (MAX).
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
To change VISUAL EQ, press or to cycle
through the OSD as OFF, NIGHT MOVIE, SOFT,
SHARP and HIGH CONT. (Default: OFF)
VISUAL EQ mode (manufacturer’s settings)
selection (VISUAL EQ MODE)
OFF:
Normal Setting (Visual EQ OFF)
NIGHT MOVIE: Suitable for movies in which
dark scenes frequently appear.
SOFT:
Suitable for CGs and animated
films.
SHARP:
Suitable for old movies where
images are not clearly shown.
HIGH CONT.: Suitable for recent movies.
17-EN
Car audio and car goods internet store Winauto
Adjusting the Tint
4
Resetting the Picture Adjustment
Press s or t and select TINT.
Press or to adjust the tint. Tint tone can be
adjusted from G15 (G MAX) to R15 (R MAX).
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Contrast
2
3
4
Press s or t and select CONTRAST.
Press or to adjust the contrast. Contrast can
be adjusted from –15 (LOW) to +15 (HIGH).
Press or to adjust the screen quality. Screen
quality can be adjusted from –15 (SOFT) to +15
(HARD).
Press
or
Each source has different menu. Depending on the selection of
source, setting menu changes.
• Each source can be adjustable individually.
• Adjusting should be made within 6 seconds, otherwise OSD
(On Screen Display) will be automatically turned off.
1
Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
SELECT
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
in
au
t
w
18-EN
to reset the picture adjustments.
Setting Audio & Screen
o.
4
Press s or t and select SHARPNESS.
Press s or t and select RESET.
• If you do not press
or
within 6 seconds, OSD disappears
and the previous adjustments will not be reset.
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Sharpness
2
3
2
3
ua
2
3
2
Front Control Keys
SETUP
Remote Control
Press SELECT/SETUP to switch to
AUDIO&SCREEN setting menu from PICTURE
setting menu. To change each item, press s or t.
Car audio and car goods internet store Winauto
Setting the Source Name
3
Setting the Screen Modes
Press s or t and select SOURCE NAME.
The currently selected
source name
Display mode on the screen can be adjusted to
Wide, Cinema and Normal. (Default: WIDE)
3
Press
or
to select WIDE/CINEMA/NORMAL
The currently selected
source displays on
Source Name menu
Video Signal menu is
for AUX1 only
DVD:
Source name of DVD can not be changed to other names.
WIDE
Normal images are expanded uniformly in the
horizontal direction and are displayed over the entire
screen.
AUX 1:
Press
or to select AUX1/EX-DVD/DVD-HU/DVB-T/
ISDB-T/TV/GAME/USER* (Default: AUX1)
AUX 2:
Customizing Source Name
6
Press
to select USER.
Press s, t, or and ENTER key to select the
character “A-Z”, “0-9”, “-“, space and “.”.
“DEL”:
“CLR”:
“OK”:
Delete one character at a time.
Clear entire characters.
Confirm source name and exit
from character setting menu.
If no key is pressed within 6 seconds, OSD disappears and the
source name will not be changed.
w
•
or
Press ENTER key. Character setting menu
appears.
in
au
t
4
5
o.
Your desired OSD source name can be defined up to 6 characters.
CINEMA
Normal images are expanded in the horizontal and
vertical directions. The top and bottom of the image
are cut off. This mode is suited for 16:9 cinema size
images.
ua
Press
or to select AUX2/EX-DVD/DVD-HU/DVB-T/
ISDB-T/TV/GAME/USER* (Default: AUX2)
NORMAL
Normal image (4:3)
4
Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Setting the TV System
Broadcast TV System can be manually switched.
3
Press
AUTO)
or
to select AUTO/NTSC/PAL. (Default:
Setting the Video Signal
3
Setting the Auto Level Control
Auto Level Control adjusts the sound volume
automatically. This function balances sound volume
for all sources.
3
Press or to turn ON/OFF Auto Level Control.
(Default: ON)
Press
or to select Composite/S-Video.
(Default: Composite)
Video Signal selection menu is only available in
AUX1 source.
AUX1 must be connected with either Composite
cable or S-Video cable. You can not connect both
cables at the same time. It may cause noise on the
screen.
Refer to System Connection (Page 28)
19-EN
Car audio and car goods internet store Winauto
Setting the Dimmer
Setting System Control
4
IR transmitter, FM transmitter, FM frequency, dimmer and beep can
be adjusted for all available sources.
Press
AUTO)
or
to select AUTO/LOW/HIGH. (Default:
AUTO adjusts the LCD backlight brightness automatically
by sensing the ambient light from the luminance sensor.
• Once this adjustment is made, all sources are affected.
SELECT
Setting the Dimmer Low Level
ENT
4
Front Control Keys
Press or to select low level of Dimmer
between 0 (min.) to 15 (max.). 15 (max.) is the same
brightness level with HIGH on Dimmer menu.
Setting the Beep
4
Press
ON)
or
to turn on/off beep sound. (Default:
Setting the DVD Auto Play
4
Press SELECT/SETUP to switch to SYSTEM
setting menu from AUDIO&SCREEN setting menu.
Stay on the menu until the user input.
Play movie after 6 seconds on the menu.
Play movie Immediately. It will skip
previews and the menu.
ua
2
to select NORMAL/AUTO/SKIP.
• This setting is only available before inserting a disc, or
when in stop mode.
• To activate SKIP mode, a disc must be ejected and reloaded
after setting. (Note: SKIP mode can not be activated, when
a disc is inserted or reloaded while Alpine logo is shown on
the screen monitor.)
• This function is not available on some discs.
in
au
t
o.
Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
or
NORMAL:
AUTO:
SKIP:
SETUP
Remote Control
1
Press
Resetting to the Factory Default
3
w
4
Press s or t to change each item.
Setting the IR Transmitter
4
Press
or
to select A/B/OFF. (Default: A)
Setting the FM Modulator
4
Press or to select FM Radio region (OFF/USA/
EUR/JPN). (Default: OFF)
Setting the FM Frequency
4
Press or to select desired FM Radio
Frequencies between 88.1 MHz to 92.1 MHz for USA
and Europe, and 88.1 MHz to 90.0 MHz for Japan.
(Default: 89.1 MHz)
• USA frequency step is 0.2MHz and Europe and Japan is
0.1MHz.
20-EN
Press ENTER Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Visual EQ, Display Mode are also reset.
DVD Setup values will not be affected.
Car audio and car goods internet store Winauto
DVD Player Setup
4
After setting, press and hold SETUP for at least 2
seconds.
Save the setting to exit the setting mode.
DVD CONTENTS SETUP
DVD SETUP
st
ENTER
Setting the language
RETURN
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (Not all
discs allow changing the default language. If not, the factory default
language applies.)
n
number
keys
(0 to 9)
Setting item: LANGUAGE → AUDIO / SUBTITLE / MENU
You can perform setup operation when disc playback
is stopped (STOP), or no disc is inserted.
Press and hold SETUP for at least 2 seconds.
w
The SETUP menu is displayed.
2
*1 AUTO:
The disc is played with the audio language or subtitle
language set as the priority language for the disc.
*2 OFF:
Subtitles are not displayed. (SUBTITLE only)
*3 OTHERS:
Set this to play the disc with a language other than one
of the languages displayed. Press ENT. then use the
number keys (“0” to “9”) to input the 4-digit language
code. Then press ENT. again. For the language codes,
refer to “List of Language Codes” (page 29).
in
au
t
SETUP Operation
Setting contents:
AUTO *1 (Initial setting) / OFF *2 (SUBTITLE only) / ENGLISH
/ FRENCH / JAPANESE / ITALIAN / GERMAN / SWEDISH /
SPANISH / CHINESE / OTHERS *3
o.
Use steps 1 to 4 to select one of the SETUP modes
to modify. See the applicable section below for
details about the selected SETUP item.
ua
AUDIO:
Set the audio track language.
SUBTITLE:
Set the language of the subtitles displayed on the screen.
MENU:
Set the language used for the menus (title menu, etc.).
MENU and DVD SETUP are the same button.
1
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. The settings
are not cleared even when the vehicle's battery.
Press s or t to select the desired setup item, then
press ENT.
Setting items: SYSTEM SETUP / DVD CONTENTS SETUP /
CD CONTENTS SETUP / AUDIO SETUP
3
Select setting items or setting contents you want
to change in the selected setup by pressing s, t,
, , and press ENT.
Setting items
• If you change the language setting when the disc is inside, the
setting is decided with one of the following operations.
-Disc eject.
-Turn OFF the main unit.
-Switch the source on the head unit.
• To temporarily change the language of the current disc, either do
so from the DVD menu or using the operation described in the
section "Switching the audio tracks" (page 15).
• If the disc does not include the selected language, the disc’s default
language is set.
• Languages set upon shipment from the factory:
Audio language : AUTO
Subtitle language : AUTO
Menu language : AUTO
• Press RETURN to return to the previous display.
SYSTEM SETUP:
BACK PICTURE / TV SCREEN (ASPECT / TV SYSTEM)
/ SETUP INITIALIZE
DVD CONTENTS SETUP:
LANGUAGES (AUDIO / SUBTITKLE / MENU) /
PARENTAL (PASSWORD → COUNTRY CODE /
PARENTAL LEVEL / CHANGE PASSWORD) /MAIN
STORY / AUTO DVD MENU
CD CONTENTS SETUP:
CD PLAY MODE / COMPRESS PLAY MODE (PRIORITY
MODE / COMBINATION MODE / JPEG STILL MODE) /
AUTO DISPLAY / REGISTRATION CODE / DIVX® SETUP
(REGISTRATION / DEREGISTRATION)
AUDIO SETUP:
DIGITAL OUT (DOLBY D/DTS) / DOWNMIX MODE
21-EN
Car audio and car goods internet store Winauto
Setting the Country Code
• Write down the password on a piece of paper and store the piece of
paper somewhere in case you forget it.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• Once set, this rating level remains in memory until changed. To
enable the play of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are
unsure about a DVD, play it first to confirm. Do not leave
DVDs accessible to young children for whom you deem them
inappropriate.
Set the country code when setting the rating level (Parental lock).
Setting item: PARENTAL → PASSWORD → COUNTRY CODE
Setting contents: AUTO / OTHERS
AUTO: The country code memorized in the disc is set.
OTHERS: Select this if the desired country code is input.
To change the Country Code:
Use the numeric keypad ("0" to "9") to input the 4-digit
country code, then press ENT.
Example: Germany "6869" is input.
COUNTRY CODE 6 8 6 9
Tips
• If the input code is wrong, “CODE ERROR” is displayed and the
unit returns to the setup display again.
• For the country codes, refer to “List of Country Codes” (pages 30
and 31).
• One digit can be erased at a time each time CLR is pressed.
Pressing and holding CLR for at least 2 seconds will delete all
digits.
• Press RETURN to return to the previous screen.
Setting the Rating Level (Parental Lock)
Setting item: MAIN STORY
Setting contents: OFF (Initial setting) / ON
If you want to play back the main Story directly, set to ON.
• The function may not be available depending on the disc.
in
au
t
Input numbers are displayed as “∗.”
The default password is 1111 upon shipment from the
factory.
The restriction level (PARENTAL LEVEL) input display
appears.
This function skips warnings, precautions, etc., initially displayed
when you play back a DVD, and goes straight to the main Story.
o.
Setting item: PARENTAL → PASSWORD → PARENTAL LEVEL
Setting contents: OFF (Initial setting) / 8~1
ua
Playing back a Main Story directly
Use this function to restrict the viewing of movies to children of
appropriate age levels only.
1 Use the numeric keypad (“0” to “9”) to input the 4-digit
password, then press ENT.
• Changing the rating level temporarily
Some discs may request that you change the rating level set
in the default settings during playback. In this case, the
message appears on the monitor screen “PARENTAL LEVEL
CHANGE OK?”
• To change parental level and play, press ENT.
• To play without changing the parental level, press n .
(When n is pressed, playback will be at the parental level
set with “Setting the Rating Level (Parental Lock).”)
w
• One digit can be erased at a time each time CLR is pressed.
• Pressing and holding CLR for at least 2 seconds will delete all
digits.
• Pressing RETURN will return to the previous screen.
• If the password is wrong, the unit returns to the SETUP display.
2 Press ,
or ENT. to select the restriction level (8 to 1),
then press ENT.
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level.
The lower the number, the higher the rating level.
Setting the Rating Level (Parental Lock)
You can automatically select the buttons displayed on the top
menu/menu image screen by setting time (seconds) without setting
manually.
Setting item: AUTO DVD MENU
Setting contents: OFF (Initial setting) / SET TIME (1~15 sec)
SET TIME: Set your desired duration (1 to 15 seconds)
using the numeric keypad. After the set time has
passed, the buttons are automatically selected.
(For example, if 8 seconds is set, press 8, and
then press ENT.)
SYSTEM SETUP
• Press RETURN to return to the previous display.
Change the Password
If you want to change the password, select “CHANGE PASSWORD”,
then input the new password (4 digits).
Setting item: PARENTAL → PASSWORD → CHANGE PASSWORD
Setting contents: PASSWORD Input
Use the numeric keypad (“0” to “9”) to input a 4-digit new
password, then press ENT.
22-EN
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. The settings
are not cleared even when the vehicle’s battery is disconnected.
Switching the Background Colour
You can select the background colours from 2 types preset or colour
4 types.
Setting item: BACK PICTURE
Setting contents: TYPE-1 (Initial setting) / TYPE-2 / COLOR ∗
∗ COLOR → BLACK / GRAY / BLUE / GREEN
Car audio and car goods internet store Winauto
Setting the TV Screen
CD CONTENT SETUP
Use the procedure described below to set the output screen according
to the type of TV monitor being used.
Setting item: TV SCREEN → ASPECT
Setting contents: 16:9 (WIDE) (Initial setting) / 4:3 (LETTER
BOX) / 4:3 (PAN SCAN)
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. The settings
are not cleared even when the vehicle’s battery is disconnected.
Playing MP3/DivX® Data
• For some discs, the picture may not be set to the selected screen
size. (For details, refer to the explanation on the disc’s jacket.)
• Press RETURN will return to the previous screen.
16 : 9 WIDE
Select this when
connected to a wide
screen TV. This is selected
upon shipment from the
factory.
Setting item: CD PLAY MODE
Setting contents: CD-DA / COMPRESS (Initial setting)
This unit can play back CDs containing both CD and MP3/DivX®
data (created in Enhanced CD (CD Extra) format).
CD-DA:
Only CD data can be played back.
COMPRESS: Only MP3/DivX® data can be played back.
Setting Compression Playback Data
If a disc contains both video and audio compression files, you can set
to play back only video or audio.
Setting item: COMPRESS PLAY MODE → PRIORITY MODE
Setting contents: ALL (Initial setting) / AUDIO ONLY / VIDEO ONLY
Plays back audio and video in the recorded
sequence.
AUDIO ONLY: Identifies and plays an MP3 file.
VIDEO ONLY: Identifies and plays a DivX®/JPEG/ASF file.
ua
ALL:
Setting Playback simultaneously
The function allows you to play back a JPEG still screen along with
attached audio.
o.
4 : 3 LB (LETTER BOX)
Select this when connected to a
conventional 4 : 3 size (normal
TV aspect ratio) monitor. There
may be black bands visible at
the top and bottom of the screen
(when playing a 16 : 9 size
movie). The width of these stripes
will depend upon the original aspect ratio of the theatre
release of the movie.
Setting item: COMPRESS PLAY MODE → COMBINATION MODE
Setting contents: OFF (Initial setting) / AUDIO WITH JPEG * /
JPEG WITH AUDIO *
in
au
t
4 : 3 PS (PAN- SCAN)
Select this when
connected to a
conventional 4 : 3 size
monitor. The picture will fill
the entire TV screen.
However, due to the
mismatch in aspect ratio,
parts of the movie at the extreme left and right sides will not
be visible (when playing a 16 : 9 size movie).
w
Setting the TV System
You can select the output playback method of an NTSC or PAL signal
disc.
Setting item: TV SCREEN → TV SYSTEM
Setting contents: MANUAL / AUTO CHANGE (Initial setting) /
AUTO SELECT
AUTO CHANGE: Image is output by converting the played
back disc to the signal system of the monitor.
AUTO SELECT: Outputs an image according to the disc
signal to be played back.
(only when both an NTSC/PAL compatible
monitor is connected.)
• If you set to AUTO CHANGE, the image may show some
deterioration compared to the original.
Returning to the Initial Setting
You can return the contents you previously set to the initial factory
settings.
Setting item: SETUP INITIALIZE
Setting contents: YES / NO
OFF:
AUDIO WITH JPEG (DISC):
The function is set to OFF.
Plays back an audio file
simultaneously attached to a
JPEG (still screen) file from
the disc.
AUDIO WITH JPEG (FOLDER): Playback an Audio file
simultaneously attached
with a JPEG (still screen) file
within some folder.
Setting contents: * AUDIO WITH JPEG → NORMAL / RANDOM
* JPEG WITH AUDIO → NORMAL / RANDOM
NORMAL: Plays in the disc’s track order.
RANDOM: Played back the disc randomly.
Setting Time for Still Image Playback
If you set playback time for still image (JPEG file), images are
continuously played back (slide show).
Setting item: COMPRESS PLAY MODE → JPEG STILL MODE
Setting contents: MANUAL / SET TIME (1~120 sec)
(The initial setting is 5 sec)
or
MANUAL: Plays back with still image. Pressing
will play back the next JPEG file, or return to
the previous JPEG file.
SET TIME: Using the numeric keypad input, you can set
playback time between 1 and 120 seconds (slide
show playback).
YES: Returns to the initial setting.
NO: Does not returns to the initial setting.
23-EN
Car audio and car goods internet store Winauto
Setting the Display
Wireless Headphone
The disc usage conditions described in “Displaying the Disc Status”
(pages 16) are displayed on the wallpaper, or the upper part of the
image during playback. (Except DVD video).
Headphone Receivers
Setting item: AUTO DISPLAY
Setting contents: OFF / ON (Initial setting)
OFF: Usage status is not displayed.
ON: When a disc is played back, usage status of the disc to
be played back is displayed on the wallpaper or in the
upper part of the image.
(When DivX®, JPEG or ASF discs are played back, the
disc status is displayed for 3 seconds.)
Setting for DivX® video on demand
Displays the registration code and support version of the DivX®.
Setting item: REGISTRATION CODE
About DivX® Video
Read carefully to prevent damage to the headphone or
your ears:
in
au
t
DivX®, DivX Certified® and associated logos are registered
trademarks of DivX, Inc. and are used under license.
Operation
o.
DivX® is a digital video format created by DivX,Inc.
This is an official DivX Certified device that plays DivX
video.
Visit www.divx.com for more information and software
tools to convert your files into DivX video.
1) Infrared Sensors; Receive signal from the transmitter.
2) Battery Cover
3) Volume Control
4) Power Switch
5) Power Indicator LED
ua
• Selecting “RETURN” on the registration setting screen will return
the previous display.
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorders in the DivX® mode with file
extension “avi” or “divx”.
About DivX® Video-On-Demand
w
This DivX Certified® device must be registered in order
to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD
section in “CD CONTENTS SETUP” menu. (See the
detail in above section)
Go to vod.divx.com with this code to complete the
registration process and learn more about DivX VOD.
WARNING: Before turning on the power, remove headphones and
turn the volume down as low as possible.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down before
placing it on your ears and turning on the power.
3) Turn on the headphone power and adjust the headphone
volume to a comfortable level (You can increase the
audio source volume if needed).
Battery Installation
Place two AAA batteries into the battery compartment of the
headphone(s), making sure that the battery polarity is correct.
24-EN
Car audio and car goods internet store Winauto
Installation and Connections
Before installing or connecting the unit, please
read the following and pages 3 and 4 of this manual
thoroughly for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not securely
install the unit in place. This may cause parts to become loose resulting
in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM
THE NEGATIVE BATTERY TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Failure to do so may result in electric shock or injury due to electrical
shorts.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
rubber grommet to prevent the wires insulation from being cut by the
metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
o.
Arrange wiring and cables in compliance with the manual to prevent
obstructions when driving. Cables or wiring that obstruct or hang up
on places such as the steering wheel, gear lever, brake pedals, etc., can
be extremely hazardous.
ua
MAKE THE CORRECT CONNECTIONS.
The wiring and installation of this unit requires special technical skill
and experience. To ensure safety, always contact the dealer where you
purchased this product to have the work done.
Warning
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
in
au
t
Avoid installing the unit in locations with high incidence of moisture
or dust. Moisture or dust that penetrates into this unit may result in
product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other equipment.
Doing so will exceed the current carrying capacity of the wire and
result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
w
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed, consult a
physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement, etc., and
result in a serious accident.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your unit. This will reduce any chance of damage to the
unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage
to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board computer).
Do not tap into these leads to provide power for this unit. When
connecting the unit to the fuse box, make sure the fuse for the
intended circuit of the unit has the appropriate amperage. Failure to
do so may result in damage to the unit and/or the vehicle. When in
doubt, consult your ALPINE dealer.
• The unit uses female RCA-type jacks for connection to other
units (e.g. amplifier) having RCA connectors. You may need an
adaptor to connect other units. If so, please contact your authorized
ALPINE dealer for assistance.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate
is located on the bottom of the unit.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
25-EN
Car audio and car goods internet store Winauto
Connections
The unit needs the following power connections to assure proper
operation of the monitor.
Power Connector
1) BATT
• Battery Lead
Yellow
Connect this lead to the positive (+) post of the vehicle’s battery.
2) ACC
Red
• ACC
Connect this line to the vehicle’s ACC line.
(Switched 12V, ignition)
3) GND
Black
• GND
Connect this line to the vehicle’s GND line.
4) DOOR
• Door
Green
Connect this lead to the vehicle’s door
AV Connector 1 (AUX1)
AUX IN 1 (VIDEO)
Yellow
• Video Input Connector
White (L)
AUX IN 1 (AUDIO R)
Red (R)
POWER +12V
Red
in
au
t
White/Brown
REMOTE IN
White/Brown
w
REMO OUT
(AUX 1)
S-VIDEO
• Audio Input Connectors
These connectors are used in combination with a head
unit or TV Tuner with audio output connectors.
o.
AUX IN 1 (AUDIO L)
ua
This connector is used in combination with the video inputs
of other video products (AV head unit or TV Tuner)
Blue/Brown
• Power Control
Connect this lead to any ALPINE video source product's ACC
line, which is red. It controls turning the power ON/OFF for the
ALPINE video products correspond to unit power.
• Remote Out 1
Corresponds to AUX 1. To control ALPINE DVD player,
TV tuner or DVD-HU, connect to each REMOTE IN.
• Remote In
To control ALPINE PKG-2000P, DVD player or TV tuner
from DVD-HU or LCD monitor in the front area of the vehicle,
connect this line to the ALPINE DVD-HU or LCD monitor
REMOTE OUT.
• S-Video Input
You can not use Composite Video Input and S-Video
input at the same time. It may cause noise on the
screen. Refer to Video Signal setting (page 19)
AV Connector 2 (AUX2)
AUX OUT (VIDEO)
Yellow
• Video Output Connector
This connector is used in combination with the video inputs
of other video products (AV head unit or LCD monitor)
AUX OUT (AUDIO L) White (L)
AUX OUT (AUDIO R) Red (R)
AUX IN 2 (VIDEO)
Yellow
• Audio Output Connectors
These connectors are used in combination with a head unit or
LCD monitor with audio input connectors.
• Video Input Connector
This connector is used in combination with the video inputs
of other video products (AV head unit or TV Tuner)
AUX IN 2 (AUDIO L)
White (L)
AUX IN 2 (AUDIO R) Red (R)
REMO OUT (AUX 2)
White/Brown
• Audio Input Connectors
These connectors are used in combination with a head
unit or TV Tuner with audio output connectors.
• Remote Out 2
Corresponds to AUX 2. To control ALPINE DVD player,
TV tuner or DVD-HU, connect to each REMOTE IN.
26-EN
Car audio and car goods internet store Winauto
Mount Side
FM Switching Box
Connector
Dome Light Polarity
AV Connector 1
The detail of dome light polarity switch
o.
The direction of AV
connector ports
Power Connector
ua
AV Connector 2
in
au
t
Dome Light Wire
Dome light wire connects the built-in Dome Light to the cable from
the vehicle’s Dome Light Switch.
Polarity change switch is located on the top surface that
mounts into the headliner.
w
Vehicle Door polarity depends on the vehicle
type. The polarity can be changed by the “Door
SW polarity” switch. (Default: Negative Switched
System)
Polarity +: When door open, door signal is 12V
Polarity -: When door open, door signal is GND
unit
unit
27-EN
Car audio and car goods internet store Winauto
System Connections
ALPINE Multi Media Station
w
in
au
t
o.
ua
ALPINE TV tuner
PKG-2100P DVD Built-In
Overhead Monitor
When the game port and
AUX2 are connected at the
same time, the game port has
a priority.
28-EN
Car audio and car goods internet store Winauto
Information
List of Language Codes
(For details, see page 21.)
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
98145.451
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
ua
Abbreviation
IE
IK
IN
IS
IT
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
o.
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
in
au
t
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
w
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
29-EN
Car audio and car goods internet store Winauto
List of Country Codes
(For details, see page 22.)
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
30-EN
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
Country
Abbreviation
Dominica
KI
Dominican Republic
KM
Algeria
KN
Ecuador
KP
Estonia
Egypt
KR
Western Sahara
KW
Eritrea
KY
Spain
KZ
Ethiopia
LA
Finland
Fiji
LB
Falkland Islands
LC
Micronesia, Federated
LI
States of
LK
Faroe Islands
LR
France
LS
Gabon
LT
United Kingdom
LU
Grenada
LV
Georgia
LY
French Guiana
MA
Ghana
MC
Gibraltar
MD
Greenland
MG
Gambia
MH
Guinea
MK
Guadeloupe
Equatorial Guinea
ML
Greece
MM
South Georgia and the
MN
South Sandwich Islands
MO
Guatemala
MP
Guam
Guinea-Bissau
MQ
Guyana
MR
Hong Kong
MS
Heard Island and
MT
McDonald Islands
MU
Honduras
MV
Croatia
MW
Haiti
MX
Hungary
MY
Indonesia
MZ
Ireland
NA
Israel
NC
India
NE
British Indian Ocean Territory
NF
Iraq
NG
Iran, Islamic Republic of
NI
Iceland
NL
Italy
NO
Jamaica
NP
Jordan
NR
Japan
NU
Kenya
NZ
Kyrgyzstan
OM
Cambodia
ua
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
o.
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Country
Abbreviation
Andorra
DM
DO
United Arab Emirates
Afghanistan
DZ
EC
Antigua and Barbuda
EE
Anguilla
EG
Albania
EH
Armenia
ER
Netherlands Antilles
Angola
ES
ET
Antarctica
FI
Argentina
FJ
American Samoa
FK
Austria
FM
Australia
Aruba
Azerbaijan
FO
Bosnia and HerzeFR
govina
GA
Barbados
GB
Bangladesh
GD
Belgium
GE
Burkina Faso
GF
Bulgaria
GH
Bahrain
GI
Burundi
GL
Benin
GM
Bermuda
GN
Brunei Darussalam
GP
Bolivia
GQ
Brazil
GR
Bahamas
GS
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote dílvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
in
au
t
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
w
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Code
7573
7577
7578
7580
7582
7587
7589
7590
7665
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao Peopleís Democratic Republic
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana
Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Car audio and car goods internet store Winauto
Code
8374
SK
SL
SM
SN
SO
SR
ST
SV
SY
SZ
TC
TD
TF
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
TG
TH
TJ
TK
TM
TN
TO
TP
TR
TT
TV
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan
TW
Mayen
Slovakia
TZ
UA
Sierra Leone
UG
San Marino
UM
Senegal
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern TerVI
VN
ritories
VU
Togo
WF
Thailand
WS
Tajikistan
YE
Tokelau
YT
Turkmenistan
YU
Tunisia
ZA
Tonga
ZM
East Timor
ZW
Turkey
Trinidad and Tobago
Tuvalu
ua
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Abbreviation
SJ
Code
8487
8490
8565
8571
8577
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of
China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
o.
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Country
Panama
Peru
French Polynesia
Papua New Guinea
Philippines
Pakistan
Poland
Saint Pierre and
Miquelon
Pitcairn
Puerto Rico
Portugal
Palau
Paraguay
Qatar
Reunion
Romania
Russian Federation
Rwanda
Saudi Arabia
Solomon Islands
Seychelles
Sudan
Sweden
Singapore
Saint Helena
Slovenia
in
au
t
Code
8065
8069
8070
8071
8072
8075
8076
8077
w
Abbreviation
PA
PE
PF
PG
PH
PK
PL
PM
31-EN
Car audio and car goods internet store Winauto
If you encounter a problem, please turn the power off, then on
again. If the unit is still not functioning normally, please review the
items in the following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected or consult your authorized Alpine
dealer.
w
in
au
t
o.
No function or display.
• Vehicle's ignition is off.
- If connected following the instructions, the unit will not
operate with the vehicles ignition off.
• Improper power lead connections.
- Check power lead connections.
• No fuse or blown fuse.
- Replace the fuse on the battery lead of the unit with the
proper value.
• Vehicle’s battery is weak.
- Check the voltage of vehicle’s battery.
Disc playback sound is wavering.
• Moisture condensation in the disc unit.
- Allow enough time for the condensation to evaporate (about
1 hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Re-insert the disc following the instructions in the "Loading
and Unloading Discs" section.
Unable to fast forward or reverse the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your
unit can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• The disc is very dirty.
- Clean the disc.
• The disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc.
Consult your nearest ALPINE dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
Error displays
• Mechanical error
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
Unit does not operate.
• Monitor's power is not turned on.
- Turn on the monitor's power.
• Condensation
- Wait a while (about 1 hour) for the condensation to dry.
No picture is produced.
• Monitor's mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor's parking brake cord is not connected.
- Connect the monitor's parking brake cord and set the parking
brake. (For details, refer to the monitor's instructions.)
• Monitor's parking brake is not set.
- Connect the monitor's parking brake cord and set the parking
brake. (For details, refer to the monitor's instructions.)
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing
upward.
• The disc is dirty.
- Clean the disc.
• A disc not able to playback with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
• Setup menu is displayed.
- Press SETUP to turn the menu off.
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be unclear, but this is normal.
• Vehicle's battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor's fluorescent tube is worn out.
- Replace the monitor's fluorescent tube.
Image stops sometimes.
• Disc is scratched.
- Replace with a non-scratched disc.
No picture display.
• Brightness control is set for minimum brightness control.
- Adjust the brightness.
• Incorrect setting of the mode.
- Switch to the correct mode.
- Check the connection to the source unit.
- Check the power of the source unit.
• Incorrect or open connection with the Monitor, AV interface
unit.
- Check the connection and remedy.
Picture color is poor.
• Brightness/Color/Tint/Contrast/Sharpness control are not set to
the proper positions.
- Check each control.
Spots or dotted lines/stripes appear.
• Caused by neon signs, high-voltage power lines, CB
transmitter, other vehicle’s ignition plugs, etc.
- Change the location of your vehicle.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
ua
In Case of Difficulty
32-EN
Due to continuous product improvement, specifications and
design are subject to change without notice.
Car audio and car goods internet store Winauto
System Indication
LOADING ERROR
DISC ERROR
• Mechanism error.
EJECT ERROR
• Mechanism error.
1) Press and eject the disc.
If the disc does not eject, press and hold for at least 3
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
ua
1) Press and eject the disc.
If the disc does not eject, press and hold for at least 3
seconds and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
• The temperature in the car is too low.
- Raise the temperature in the car to normal temperature.
o.
NO DISC
• No disc is inserted.
- Insert a disc.
in
au
t
• Although a disc is inserted, "NO DISC" is displayed and the
w
unit does not start to play or eject the disc.
- To remove the disc, press and hold for at least 3 seconds.
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
REGIONAL CODE
VIOLATION
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
HI-TEMP
• Protective circuit is activated at high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and
then turn the power ON again.
33-EN
Car audio and car goods internet store Winauto
Accessories
Specifications
Check accessory parts.
Video Display System NTSC/PAL Compatibility
AV Connector 1
AV Connector 2
Power Connector
X1
RUE-4159 Universal
Remote Control
X1
SHS-N100 Single
Source Wireless IR
Headphone
DISPLAY SCREEN
Size
Width
Height
Aspect Ratio
Type
X1
Installation Bracket*1
System
Number of Elements
Effective Number of
Elements
Back Light
GENERAL
Operating Voltage
X1
X1
Screws (for
Installation Bracket)
Trim Ring*2
X1
ua
Power Consumption
Video Input
Audio Input
IR Transmitter
Screws (for Trim
Ring)
o.
FM Modulator
Operating Temperature
X4
FM Switching Box
AAA Battery
X6
in
au
t
X1
X1
Built-in DVD Overhead Monitor
PKG-2100P
X1
Cold Cathode Fluorescent
Lamp
10 – 16 V DC
(Typical: 12V)
2.35A (MAX)
1.60A (TYP)
140mA (Stand by)
1.0V p-p 75ohm
2.0V rms (max)
CH A: 2.3MHz / 2.8MHz
CH B: 3.2 MHz / 3.8MHz
8.1MHz - 92.1MHz
PLL Frequency
Synthesizer
-4 ˚F to +158 ˚F (-20 ˚C
to + 70 ˚C)
MONITOR
Width
Depth
Height
Weight
305 mm (12.01”)
305 mm (12.01”)
52 mm (2.05”)
2.27Kg (5.0lbs)
ACCESSORIES
Weight
1.22Kg (2.7lbs)
w
X4
Document
10.2”
221mm (8.70”)
132mm (5.20”)
16:9
Transparent type TN
Liquid Crystal Display
TFT-LCD, Active Matrix
800(W) x 480(H) x 3
1.152M pixels (VGA)
99.9% or more
CAUTION
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
X1
(Bottom side of player)
Installation of Bracket and Trim Ring
x4
*1 Installation Bracket is used to stabilize the monitor at the time
of installing the monitor. Ask ALPINE dealer for detail.
*2 Trim Ring is used to make the monitor suitable to your vehicles
34-EN
x6
ceiling shape at the time of installing the monitor. Ask ALPINE
dealer for detail.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement