Lo Boost: Boost a narrow band of high frequencies a little bit. Boost Off: No boost is engaged. Hi Boost: A higher amount of boost is engaged. Metal Distortion Pedal 3 6 8 7 TONE 9 4 5 1. TRUE BYPASS Footswitch: Push down the footswitch to switch between effects and bypass status. 2. ON/OFF LED: Instructs effects or bypass status of BLADE, when the LED is lit up, the effects is on. 3. DC IN Power Jack: For power supply, use a 9-volt DC regulated AC adapter(plug polarity is positive on the barrel and negative in the center). 4. INPUT Jack: 1/4” mono audio jack, for connecting guitar. 5. OUTPUT Jack: 1/4” mono audio jack, outputs the signal. 6. Mode Switch: Switch between Lo Boost mode, Boost Off mode and Hi Boost mode. 7. VOLUME Knob: Adjust the volume of the distortion sound. 8. TONE Knob: Adjust the tone color of the distortion sound. 9. DIST Knob: Adjust the gain of the distortion sound. Main Features 3 Working Modes: Lo Boost/Boost Off/Hi Boost Full metal shell Very small and exquisite True bypass DC 9V Adapter power supply Effects Modes: 3 (Lo Boost, Boost Off, Hi Boost) Input: 1/4” monaural jack (impedance: 1M Ohms ) Output: 1/4” monaural jack (impedance: 470 Ohms) Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 20 mA Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H) Weight: 160g Accessories: Owner’s Manual * Disclaimer: Any specification’s update won't be amended in this manual.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project