Operating instructions CLARION VZ509E
You can read the recommendations in the user guide, the technical guide or the installation guide for CLARION VZ509E. You'll
find the answers to all your questions on the CLARION VZ509E in the user manual (information, specifications, safety advice,
size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual CLARION VZ509E
User guide CLARION VZ509E
Operating instructions CLARION VZ509E
Instructions for use CLARION VZ509E
Instruction manual CLARION VZ509E
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
Manual abstract:
OBS! Apparaten innehller laserkomponenten som avger laserstrlning verstigande grnsen fr laserklass 1. VAROITUS Suojakoteloa si saa avata. Laite sislt
laserdiodin, joka lhett nkymtnt silmille vaarallista lasersteily. Thank you for purchasing the Clarion VZ509E. Please read this owner's manual thoroughly
before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed
warranty card and keep it carefully with this manual. English Contents 1.
FEATURES .....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 2 Expanding Systems....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
2 Playable Discs ..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. 3 DVD Video Features ...
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
.... 3 2. PRECAUTIONS .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.... 4 Liquid Crystal Panel/Generalities .
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
....... 5 Cleaning ...
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
........ 5 About the Registered Marks, etc. .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.. 5 3. CONTROLS .......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 6 Functions of Buttons..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
. 6 Outline of Button and Touchkey Operation ....
.....
..........
..........
.....
.....
..........
..........
.....
.... 7 Remote Control Unit .
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
12 4. BASIC OPERATIONS.........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
......... 13 Turning On and Off the Power .
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.... 13 Adjusting the Volume ......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
... 14 Opening the Liquid Crystal Panel and Adjusting the Angle ..
.....
..........
..........
.....
.....
..... 14 Turning the Audio OFF .....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.. 15 Turning the Monitor OFF ........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
...... 16 Displaying the Clock Screen....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..... 16 Setting/Ejecting a Disc .....
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.. 16 Connecting/Disconnecting an USB Media Device...
.....
..........
..........
.....
.....
..........
........ 17 Selecting a Media Source ..
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
18 2-Zone Function .....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
....... 20 5. SOURCE OPERATIONS ..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
. 21 Radio Operations .........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 21 DVD Video Operations ....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
... 25 Audio CD Operations .......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
.. 32 MP3/WMA/AAC Operations ........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
. 33 DivX Operations .........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
... 36 6. SOURCE OPERATIONS (ACCESSORIES).
..........
..........
.....
.....
..........
..........
.....
.....
... 39 iPod Operations.......
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
. 39 USB Memory Operations....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
43 Navigation System Operations .....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
44 AUX Operations .....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
....... 45 7. SYSTEM SETTINGS..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
........ 46 Audio Settings ..
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
........ 46 General Settings..
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
49 Adjusting the Monitor.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..... 52 8. TROUBLESHOOTING ....
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
... 53 9. ERROR DISPLAYS......
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 55 10. SPECIFICATIONS ...
..........
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
57 INSTALLATION AND WIRE CONNECTION MANUAL ..........
.....
.....
..........
..........
.....
.....
. 58 Owner's manual VZ509E 1 1. FEATURES English Owner's manual NP509E (Hide-away Navigation) Control with Touch Panel USB Direct connection
for iPod 7-inch Wide-Screen Color LCD Touch Panel, DVD Video/CD/MP3/WMA/AAC Player Expanding Systems Expanding audio features Expanding
visual features Rear Vision Camera (CC2011E/ CAA185) 4-Channel Amplifier Rear Monitor iPod VTR etc. BLT373 USB Memory Bluetooth cellular phone
Note: The items listed outside of the frames are the commercial products generally sold. NP509E Expanding navigation features 2 VZ509E Playable Discs
This DVD player can play the following discs: Playable discs About playing a DVD-R/RW or DVD+R/RW disc This player can play DVD-R/RW and
DVD+R/RW discs previously recorded in DVD video format or format with MP3/WMA/AAC/DivX files. English Owner's manual Discs that cannot be played
back This player cannot play DVD Audio, DVD-RAM, Video CDs, Photo CDs, etc. DVD video discs Audio CDs CD TEXT Note: It may not be possible to play
back discs recorded on some CD/DVD drive units. (Cause: disc characteristics, cracks, dust/dirt, dust/dirt on player's lens, etc.) If a CD-R/RW, DVD-R/RW,
or DVD+R/RW disc that has not been finalized is played, it will take a long time to start playing. Also, it may not be possible to play depending on its
recording conditions.
You cannot play Super Audio CDs. Playback of the CD player is not supported even if it is a hybrid disc. In addition, the DVD player can play CD-R/RW,
DVD-R/RW, and DVD+R/RW discs on which the following media files have been recorded: Playable media files MP3 ID3 TAG WMA Note on region
numbers of DVD video discs AAC DivX For detailed information, see the sections entitled "MP3/WMA/AAC Operations" (page 33) and "DivX Operations"
(page 36). The DVD video system assigns a region number to DVD players and DVD discs by sales area. The DVD video region number playable in this
system is marked on the disc jacket as shown below. About CD Extra discs A CD Extra disc is a disc in which a total of two sessions have been recorded. The
first session is Audio session and the second session is Data session. Your personally-created CDs with more than second data sessions recorded cannot be
played on this DVD player. Note: When you play a CD Extra disc, only the first session will be recognized. ALL 2 DVD Video Features This unit provides the
following functions in addition to the high image quality and sound quality of DVD video.
Note: The functions described in this section differ depending on the DVD video disc. Refer to the instructions provided with the DVD video. Some disc
functions may operate differently from described in this manual. About playing a CD-R/RW disc This player can play CD-R/RW discs previously recorded in
Audio CD format or format with MP3/ WMA/AAC/DivX files. VZ509E 3 Multi-sound function DVD video can store up to 8 languages for one film; select the
language of your preference.
The languages stored on the disc are indicated by the icon shown below. 2. PRECAUTIONS WARNING For your safety, the driver should not watch the DVD
video/movie data or operate the controls while driving. Please note that watching and operating the DVD video/ movie data while driving are prohibited by
law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard.
1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical
parts of the player and proper playback may not be possible. If moisture forms on the disc (DVD/CD), wipe it off with a soft cloth. If moisture forms on the
optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2. Driving on
extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble
arises, never open the case, disassemble the unit, or lubricate the rotating parts.
English Owner's manual Multi-angle function A DVD video that is filmed from multiple angles allows you to select the angle of choice. The number of
recorded angles is indicated by the icon shown below. Subpicture (subtitles) function A DVD video can record subtitles for up to 32 languages and you can
select the language of the subtitles you wish to see. The number of recorded subtitle languages is indicated by the icon shown below. Multi-story function
When a DVD video contains more than one story for a film, you can select the story you wish to enjoy. The operation procedures vary with the disc; observe
the instructions for selecting a story provided during playback. INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT
APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY. DVD menu DVD Menus can be called up during DVD video playback to perform
menu setting. Example showing DVD menu 4 VZ509E Liquid Crystal Panel/ Generalities For a longer service life, be sure to reE and BBE symbol are
registered trademarks of BBE Sound, Inc. 3.
CONTROLS Blink LED [OPEN/CLOSE] English Owner's manual [VOL ] Sensor [VOL +] [SRC] Functions of Buttons Note: Be sure to read this section
while referring to the front diagram.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
Sensor Receiver for the remote control unit (operating range: 30 in all directions). [VOL ], [VOL +] buttons Use these buttons to increase/decrease the
volume. [SRC] button When the liquid crystal panel is closed, press this button to change to the next source mode such as Tuner mode. When the liquid crystal
panel is open, press this button to display/hide the Source screen to switch the source mode.
When the RDS interrupts are arisen, keep pressing this button more than 1 second to cancel these interrupts. [OPEN/CLOSE] button Use this button to
open/close the liquid crystal panel. Keep pressing this button more than 2 seconds so that the liquid crystal panel is positioned horizontally when the liquid
crystal panel is open (Air Conditioner Operation mode). When the liquid crystal panel is closed, keep pressing this button more than 5 seconds to perform the
panel calibration function to memorize the maximum angle of the liquid crystal panel. Blink LED When the Blink LED function is set to "On" from the System
tab menu on the General screen, blinks when the ACC power is turned off.
6 VZ509E Outline of Button and Touchkey Operation Turning the power on English Owner's manual Engine ON position When the liquid crystal panel is
open 1 When the liquid crystal panel is closed System check The CeNET format utilized on this unit is provided with a system check function. When the system
check function is performed under the following conditions, the power is automatically turned off. Once turn off the engine switch, then restart the engine
again. When power is first turned on after initial installation. When an external device is connected or disconnected. When Reset button is pressed. * In
addition to the above conditions, the system check function can be performed from the System tab menu on the General screen. Note: *1 These images
indicate the buttons to press or keys to touch. You can change the media sources. VZ509E 7 Tuner mode operation English Owner's manual (Source screen)
Switches the radio band.
Selects Home/Travel modes. Seek tuning Manual tuning (Options screen) Preset ch. Select desired station after selecting radio band. (PTY Select screen)
(Items screen) 8 VZ509E DVD Video mode operation English (DVD Video mode screen) *2 (Source screen) Owner's manual * Screen during DVD Video
mode when automobile moving. (Options screen) (DVD top menu) *2 (Setup screen) Note: *2 If you do not touch the screen for about 7 seconds, all the keys
on the screen will disappear. Touch the screen surface to redisplay them. VZ509E 9 Adjusting the General settings English Owner's manual (Source or Mode
screen) (Settings screen) (General screen) (Display tab screen) (System tab screen) 10 VZ509E Adjusting the Audio settings English (Source or Mode screen)
Owner's manual (Settings screen) (Others tab screen) (Audio screen) (Beat EQ tab screen) (BAL/FAD tab screen) VZ509E 11 Remote Control Unit Names of
buttons Signal transmitter Operating range: 30 in all directions Functions of Remote Control Unit Buttons You can use the remote control unit to control the
VZ509E. When the 2-Zone function is ON, the controls work upon the Sub zone only. Note: The steering wheel remote control operations work upon the Main
zone even when the 2-Zone function is ON. English Owner's manual [SUBTITLE] [AUDIO] [TOP MENU] [ENT] [SOURCE] [BAND] [6] [ANGLE]
[MENU] [E], [e], [T], [t] [RETURN] [], [+] [R], [F] [AUDIO] button Press to set the Audio language.
(in DVD Video and DivX modes) [SUBTITLE] button Press to display subtitles. (in DVD Video and DivX modes) [ANGLE] button Press to switch among the
angles when DVD video discs recorded in multiple angles are played back. [TOP MENU] button Press to display the DVD top menu stored on the DVD video
disc. Some discs are not displayed the DVD top menu. (in DVD Video mode) Inserting the Battery 1.
Slide the rear cover in the direction of the arrow, and remove it. 2. Insert the CR2025 battery bundled with the remote control unit in the directions shown in
the figure, then close the rear cover. Note: Using battery improperly can cause it to explode. Take note of the following points: Do not short-circuit,
disassemble or heat battery.
Do not dispose of battery into fire or flames. Dispose of spent battery properly. [MENU] button Press to display the DVD menu stored on the DVD video disc.
(in DVD Video mode) [ENT] button Press to fix the selected menu item on the DVD menu. (in DVD Video mode) [E], [e], [T], [t] buttons Press to select
desired menu item displayed on the DVD menu. (in DVD Video mode) CR2025 battery Rear side Rear cover 12 VZ509E [SOURCE] button Press to switch
the source modes such as Tuner mode, DVD mode, etc. (in any mode) * Only DVD, USB, and AUX modes are selectable when 2-Zone ON. 4. BASIC
OPERATIONS Note: Be sure to read this chapter referring to the chapter "3. CONTROLS" (page 6).
English Keep pressing more than 1 second to turn the 2-Zone function ON/OFF. (in any mode) [RETURN] button Press to return to the previous screen while
the DVD menu is being displayed. However, it may occur that this button operation dose not work on some discs. (in DVD Video mode) [BAND] button
Switches reception bands. (in Tuner mode; disabled when 2-Zone ON) Keep pressing more than 1 second to switch the Home/Travel modes. (in Tuner mode;
disabled when 2-Zone ON) Press to select the next higher folder. (in MP3/ WMA/AAC/DivX and USB memory modes) [VOL ], [VOL +] buttons Decreases or
increases the volume. (in any mode; disabled when 2-Zone ON) [6] button Press to play or pause video and audio media. (in DVD and USB modes; disabled
in USB mode when 2-Zone ON) Keep pressing more than 1 second to stop video playback. (in DVD Video mode) [R], [F] buttons Press to select the next
lower or higher preset station.
(in Tuner mode; disabled when 2-Zone ON) Press to select the next lower or higher chapter number. (in DVD Video mode) Press to select the next lower or
higher track. (in CDDA, MP3/WMA/AAC/DivX, and USB modes) Keep pressing to perform fast backward or fast forward playback. (in DVD and USB modes)
Owner's manual Turning On and Off the Power CAUTION CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to
the maximum level may harm your hearings. Be careful about adjusting the volume.
Note: Start the engine before using this unit. Be careful about using this unit for a long time without running the engine. If you drain the car's battery too far,
you may not be able to start the engine and this can reduce the service life of the battery. 1. Start the engine.
The power is supplied to this unit. Engine ON position The unit automatically memorizes its last operation mode and will automatically switch to display that
mode.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
2. To turn off the power, turn off the engine switch. About the CT (Clock Time) display The displayed clock data is based on the CT (clock time) data in the
RDS signal, or the GPS data when the Navigation system is connected. When the CT data cannot be received, "--:--" appears in the display. VZ509E 13
Adjusting the Volume 1. Press the [VOL ]/[VOL +] buttons to adjust the volume. [VOL ]: Decreases the volume. [VOL +]: Increases the volume.
The volume level indicated in the display is in a range from 0 (min.) to 33 (max.). CAUTION Note: If the liquid crystal panel stops in the middle of its
operation, press the [OPEN/CLOSE] button to house the panel and press the button again to raise it. The unit will enter the same display mode as the display
was in when last turned off. English Owner's manual 70 CAUTION While driving, keep the volume level at which external sounds can be heard. Opening the
Liquid Crystal Panel and Adjusting the Angle WARNING To prevent the battery from going dead, operate this unit with the engine running if possible. When
the liquid crystal panel is operating, be careful not to get your hand or finger caught between the panel and main unit or the instrument panel of the car. Do
not move the liquid crystal panel by hand. Panel calibration function The liquid crystal panel's maximum angle of inclination can be adjusted to match the
installation configuration within the vehicle.
Perform this with the panel in its housed position. 1. Keep pressing the [OPEN/CLOSE] button more than 5 seconds. The electronic beep will be heard. After
the beep sounds twice, the panel will come out and stand up to the maximum angle.
After completion of the calibration, the panel will be housed into the unit automatically. If the panel does not strike the instrument panel or other parts of the
car during calibration, the maximum inclination will be 110q. If the panel strikes a car part during calibration within a range of 70q inclination, the
maximum downward inclination will be 70q. Standing up the liquid crystal panel 1. Press the [OPEN/CLOSE] button.
The liquid crystal panel comes out and stands up automatically. 14 VZ509E Adjusting the angle of the liquid crystal panel The angle of the liquid crystal
panel can be adjusted depending on the mounting angle of the unit or light coming into the car. 1. Turn the power on. When the liquid crystal panel is closed,
press the [OPEN/CLOSE] button. 2. Touch the [o (Eject)] key to display the following Eject screen: Turning the liquid crystal panel horizontal (Air
conditioner operation mode) When the way the liquid crystal panel is mounted hinders the operation of the air conditioner, the position of the panel can be
turned horizontal temporarily. 1. Keep pressing the [OPEN/CLOSE] button more than 2 seconds when the liquid crystal panel is open. A beep sounds and the
liquid crystal panel turns horizontal.
Press the [OPEN/CLOSE] button again for the panel to return to the original position. The unit can be set so that the panel returns to the original position
after a set time in the horizontal position (see page 49). English Owner's manual 3. Repeat touching the [Tilt] key to adjust the angle of the liquid crystal
panel. Every touching the [Tilt] key tilts the liquid crystal panel forward or backward. The adjusted angle is stored in memory. Adjustment is possible within
the range 70q to 110q. There are 5 adjustable angles available. MAX 110 Turning the Audio OFF You can turn off all of the AV features. 1.
Press the [SRC] button to display the Source screen. 2. Touch the [Audio Off] key. The AV features are turned off. Turning the AV features on 1.
Press the [SRC] button to display the Source screen. 2. Touch the desired Source key. The AV features are turned on, and the system enters into the specified
mode. 70 4.
When the adjustment is finished, touch the [Back] key to return to the previous screen. Housing the liquid crystal panel 1. Press the [OPEN/CLOSE] button.
The liquid crystal panel is housed automatically. Note: When leaving this unit unused for a long period of time or leaving your car, be sure to house the liquid
crystal panel. VZ509E 15 Turning the Monitor OFF You can turn off the monitor screen, and change it to a black screen. 1. Touch the [SET] key to display
the Settings screen. 2. Touch the [Monitor Off] key.
The monitor screen is turned off. Turning the monitor on 1. Touch the monitor screen. The monitor screen is turned on, and resumes the last screen. You can
also turn on the monitor by pressing the [SRC] button. Never stick labels on the surface of the disc or mark the surface with a pencil or pen. Never play a disc
with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of the DVD player
or it may damage the DVD player. Do not use discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or
damage.
To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Do not use commercially
available disc protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism. English
Owner's manual Displaying the Clock Screen You can change the screen to display only the digital clock on a black screen. 1.
Touch the clock display on most screens. The Clock screen is displayed. 2. To return to the current mode screen, touch the monitor screen. Pressing the [SRC]
button displays the Source screen.
Storage Do not expose discs to direct sunlight or any heat source. Do not expose discs to excess humidity or dust. Do not expose discs to direct heat from
heaters. Cleaning To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the circumference. Do not use any
solvents, such as commercially available cleaners, anti-static spray, or thinner to clean discs. After using special disc cleaner, let the disc dry off well before
playing it. Setting/Ejecting a Disc Notes on handling discs Handling New discs may have some roughness around the edges. If such discs are used, the player
may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. Ball-point pen Roughness On Discs
Exercise a good precaution when loading a disc with the panel open.
Never turn off the power and remove the unit from the car with a disc loaded. Do not use lens cleaning discs. These may damage the lens of this unit. When
there seems to be something wrong with reading discs, please consult your dealer or an authorized Clarion service center. 16 VZ509E Setting a disc 1. Insert
a disc into the center of the insertion slot with the label side facing up. The disc will automatically be drawn into the DVD player.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
Connecting/Disconnecting an USB Media Device This unit has one USB (Universal Serial Bus) connector which is compatible with USB 1.1 and USB 2.0.
English After setting a disc The system will automatically be switched to the relevant source media mode according to the disc, and start playing back the
disc. When a DVD video disc is set: The system is switched to the DVD Video mode. See "DVD Video Operations" (page 25). When an Audio CD is set: The
system is switched to the CDDA mode. See "Audio CD Operations" (page 32).
When a CD/DVD with MP3/WMA/AAC/DivX files is set: The system is switched to the MP3/WMA/AAC mode or DivX mode according to the Playform
setting. See "MP3/WMA/AAC Operations" (page 33) or "DivX Operations" (page 36). Note: Never insert foreign objects into the disc insertion slot. If the disc
is not inserted easily, there may be another disc in the mechanism or the unit may require service. 8 cm (single play) discs cannot be used.
Owner's manual Playable USB media devices This system can control the following USB media devices connected to the USB connector. Apple iPod USB
memory About the Apple iPod iPods can be connected by using the connector cable supplied with the iPod you use, but in this case, you can enjoy its audio
sound only. To enjoy video movies stored in the iPod with video displaying them on this unit, it is required to use the special connector cable separately sold.
Note: This system will not operate or may operate improperly with unsupported versions. For detailed information on the playable iPod models, see our home
page: www.clarion.com For the other limitations, see "iPod Operations" (page 39). About the USB memory This system can play audio files (MP3/WMA/
AAC) stored in an USB memory which is recognized as "USB Mass Storage Class device". You can use your USB memory as an audio device by simply
copying desired audio files into it. Note: This system will not operate or may operate improperly with some USB memory.
Files protected with any DRM can not be played. For the other limitations, see "USB Memory Operations" (page 43). CAUTION For your safety, the driver
should not insert or eject a disc while driving. Ejecting a disc 1. Touch the [o (Eject)] key to display the Eject screen. 2. Touch the [Eject] key to eject the disc.
The disc will be ejected. If a disc is left in the ejected position for 15 seconds, the disc is automatically reloaded (Auto reload). 3.
Remove the disc carefully. 4. Touch the [Back] key. Note: If you force a disc into the insertion slot before auto reloading, this can damage the disc. VZ509E
17 Connecting an USB media device Disconnecting an USB media device 1.
Confirm that data transfer is not performed on the USB media device. For the method to confirm it, see the operation manual of your USB media device. 2.
Remove the USB media device from the USB connector. English Owner's manual CAUTION For your safety, the driver should not connect or disconnect an
USB media device.
Do not start the vehicle's engine while the USB media device is connected, since it may result in loss or damage to data on the USB media device. Connect the
USB media device to this unit after starting the engine. 1. Turn on the power of your USB media device, if required. 2. Confirming the orientation of the
connectors, connect the USB media device to the USB connector of this unit. It may take a long time to recognize the connected device. CAUTION Be sure to
disconnect the USB media device while the vehicle's engine is running. Otherwise, it may result in loss or damage to data on the USB media device. Do not
stop the engine when the USB media device is connected.
Note: When turning on the ACC power with no USB media device connected, "No Media" may be displayed on the screen if the USB mode is selected. After
connecting an USB device The system will automatically be switched to the relevant source media mode according to the USB device connected, and start
playback. When an iPod is connected: The system is switched to the iPod mode. See "iPod Operations" (page 39). When an USB memory is connected: The
system is switched to the USB Memory mode. See "USB Memory Operations" (page 43). Note: Never insert foreign objects into the USB connector. Always
insert the USB media device fully into the connector. Incomplete connections may cause the device not to be recognized. Selecting a Media Source When the
liquid crystal panel is closed 1.
Press the [SRC] button to switch the source mode. Each time you press the [SRC] button, the source mode changes in the following order: Tuner mode DVD
mode USB mode AUX mode Tuner mode... Note: When 2-Zone function is ON, the [SRC] button works only for the Main zone.
To switch the Sub zone source, specify it from the Source screen, or use the remote control unit. 18 VZ509E When the liquid crystal panel is open 1. Press the
[SRC] button to display the Source screen. English Owner's manual 2. Touch the desired Source key you wish to change to.
The system is switched to the corresponding source media mode. Available media sources Source mode Tuner mode DVD mode*1 Corresponding source
media mode Tuner mode DVD Video mode CDDA mode MP3/WMA/AAC mode DivX mode USB mode*2 AUX mode Navi mode*3 iPod mode USB Memory
mode AUX mode Navi mode Refer to page 21 page 25 page 32 page 33 page 36 page 39 page 43 page 45 page 44 *1:The source media mode to be selected
differs depending on the data format of the disc set in the DVD player. When no disc is set, "No Disc" will be displayed. *2:The source media mode to be
selected differs depending on the type of the USB media device connected. When no USB media device is connected, "No Media" will be displayed. *3:This
key is displayed only when the optional navigation system is connected. Note: When the USB mode is selected, video images input from the AUX1 terminal
will be output to the rear monitor. This is normal. VZ509E 19 2-Zone Function About the 2-Zone function The 2-Zone function is a function that assigns
separate source output to the Main zone (this unit) and Sub zone (the optional rear monitor) by simultaneously playing two sources in this system. Therefore,
the rear passengers are allowed to enjoy a different video source from the source played on the liquid crystal panel of this unit.
The source sounds of the Main zone are output from the speakers of the vehicle side, and those of the Sub zone are from the optional headphone systems.
Controlling a source assigned to the Sub zone can be made by using the optional remote control unit. To control it from this unit, once assign the same source
to the Main zone, then control it. When a media without video images is played on the Sub zone, a black screen is output to the rear monitor. Note: When an
interrupt of the navigation system arises during the 2-Zone function is turned on, the sound of the Main zone is muted, but the sound of the Sub zone is output
normally.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
When it arises during the 2-Zone function is turned off, the audio signals to the 4ch speakers are attenuated, and the voice from the navigation system is
output from the front two speakers. You cannot operate the 2-Zone function during the interrupt of the navigation system. When the same source is assigned
for Main and Sub zones, operations in a zone are also applied for another zone. Assignable source mode for Main/ Sub zones For Main zone All the source
modes can be assigned for the Front zone. For Sub zone The following source modes can be assigned: DVD mode USB mode AUX1 mode Note: The AUX2
mode cannot be assigned for the Sub zone.
English Owner's manual Setting the 2-Zone function The factory default setting is OFF. 1. Press the [SRC] button to display the Source screen. 2. Touch the
[2-Zone] tab to display the 2-Zone tab screen.
The source keys for the Sub zone are displayed. 3. Touch the desired source key you wish to assign to the Sub zone. The 2-Zone function is turned on with the
selected source mode assigned to the Sub zone. 4.
Touch the [Back] key to return to the previous screen. Note: Use the remote control unit to control the source assigned to the Sub zone. To control it from this
unit, once select the same source mode as assigned to the Sub zone for the Main zone, and then control it. Turning off the 2-Zone function 1. Press the [SRC]
button to display the Source screen. 2. Touch the [2-Zone] tab to display the 2-Zone tab screen. 3. Touch and hold the [2-Zone Off] key for more than 1
second. 20 VZ509E 5.
SOURCE OPERATIONS Radio Operations Listening to the radio 1. Press the [SRC] button, and touch the [Tuner] key. The Tuner mode screen is displayed,
and the system resumes the last status of the Tuner mode. Seek tuning English Owner's manual 2. Touch the [Home Travel] key to select the Home or Travel
mode. The Home/Travel modes are provided to manage the preset stations separately in your home location and in a location during a trip. 3. Touch the
[Band] key to select the radio band. Each time the key is touched, the radio reception band changes in the following order: In Home mode: FM Home 1 FM
Home 2 AM Home (MW/LW) FM Home 1..
. In Travel mode: FM Travel AM Travel (MW/LW) FM Travel... 4.
Touch the desired Preset key to tune in the corresponding preset station. There are 2 types of seek tuning: DX SEEK and LOCAL SEEK. The DX SEEK can
tune in to receivable broadcast stations, and the LOCAL SEEK can tune in to only broadcast stations with a good reception condition. 1. Touch the [Band]
key to select the desired band (FM or AM (MW, LW)).
2. Tune in to a station. If "TA" is displayed on the screen, TP stations are automatically sought. DX SEEK Touch the [{ (Seek)] or [} (Seek)] key to
automatically seek a station. When the [{ (Seek)] key is touched, the station is sought in the direction of higher frequencies; if the [} (Seek)] key is touched, the
station is sought in the direction of lower frequencies. When the DX Seek tuning starts, "DX-S" appears on the screen. LOCAL SEEK If you keep touching the
[{ (Seek)] or [} (Seek)] key more than 1 second, the Local Seek tuning is carried out. The broadcast stations with good reception sensitivity are automatically
selected. When the Local Seek tuning starts, "LO-S" appears on the screen. Manual tuning There are 2 ways available: Quick tuning and step tuning.
When it is in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency. 1. Touch the
[Band] key to select the desired band (FM or AM (MW/LW)). 2. Tune into a station. Quick tuning: Touch and hold the [{ (M-Seek)] or [} (MSeek)] key to tune
in a station. Step tuning: Touch the [{ (M-Seek)] or [} (M-Seek)] key to manually tune in a station. VZ509E 21 Recalling a preset station There are total of 30
preset positions (6-FM Home 1, 6-FM Home 2, 6-AM Home, 6-FM Travel, and 6-AM Travel) to store individual radio stations in memory. 1.
Touch the [Home Travel] key to select the Home or Travel mode. 2. Touch the [Band] key to select the band. 3. Touch the corresponding Preset key to recall
the stored station.
Touching and holding the desired Preset key for more than 2 seconds will store the current station to the preset memory. About the RDS (Radio Data System)
This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station
being received (PS), and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching). Also, if a traffic
announcement or program type information is broadcast from an RDS station, no matter what mode you are in, this broadcast is received. Additionally, if
EON information is received, this information enables automatic renewal of other preset stations on the same network and interruption of traffic
announcement and/or chosen program type from other stations (TP).
This function is not available in some areas. "AF" : Alternative Frequency "PS" : Program Service Name "PTY" : Program Type "EON": Enhanced Other
Network "TP" : Traffic Program The RDS interrupt does not function during AM (MW/LW) radio reception. English Owner's manual Manual memory 1.
Touch the [Home Travel] key to select the Home or Travel mode. 2. Touch the [Band] key to select the band you wish to store. 3. Tune in the station you wish
to store using the seek tuning, manual tuning, or preset tuning. 4. Touch and hold the desired Preset key you wish to store the current station for more than 2
seconds.
Auto Store The Auto Store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten at the memory position. The Auto Store function works only in the Travel mode. 1. Touch the [Home Travel]
key to select the Travel mode. 2. Touch the [Band] key to select the band. 3. Touch the [Auto Store] key to start scanning stations. A beep sounds and the
stations with good reception are stored automatically to the preset channels.
"AS" appears during scanning stations. To stop the scanning, touch the [Auto Store] key again. AF (Alternative Frequency) function The AF function switches
to a different frequency on the same network in order to maintain optimum reception. Switching ON/OFF the AF function 1. Touch the [Options] key.
2. Touch the [On] or [Off] key of the AF item to turn the function on or off. When the AF function is ON, "AF" will be displayed at the top of the screen. If the
reception of the current broadcast station deteriorates durably, "AF" indication will blink, and this unit searches for the same program on another frequency.
Scrolling radio text When the current station broadcasts text data, it is displayed on the Tuner mode screen.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
When the text is longer than the text area, you can confirm the entire text by scrolling it. 1. Touch the text area. The text will scroll once. 22 VZ509E REG
(Regional Program) function When the REG function is ON, the optimum regional station can be received. When this function is OFF, if the regional station
area is switched as you drive, a regional station for that region is received. Note: This function is disabled when a national station such as BBC R2 is being
received. The REG function ON/OFF setting is enabled only when the AF function is ON. Setting TA standby mode English Owner's manual 1. Touch the
[Options] key.
2. Touch the [On] key of the TA item to set the TA standby mode. "TA" will be displayed at the top of the screen, and the system will automatically search for
a TP station (TP SEEK). When an RDS broadcast station with traffic announcement program is received, "TP" will be displayed at the top of the screen. You
can also set the function from the Settings screen (see page 51). Note: If no TP station is received, this system continues the search operation. Performing the
above procedure again makes the "TA" go off, and stops TP station searching. Switching ON/OFF the REG function 1. Touch the [Options] key. 2.
Touch the [On] or [Off] key of the REG item to turn the function on or off. Manually tuning a regional station in the same network Note: This function can be
used when a regional broadcast of the same network is received. This function is enabled only when the AF function is ON and the REG function is OFF. 1.
Touch the [Band] key to select the band.
2. Touch your desired Preset key to call out a regional station. 3. Each time you touch the same Preset key, this unit switches from a local station to the other
on the same network. TA (Traffic Announcement) function When a traffic announcement broadcast starts during the TA standby mode, the traffic
announcement broadcast is received as top priority regardless of the function mode, so you can listen to it.
The Traffic Program (TP) automatic tuning is also available. Canceling a Traffic Announcement broadcast 1. Touch the [Back] key while a Traffic
Announcement broadcast is being received. The Traffic Announcement broadcast reception is canceled, and the system goes into the TA standby mode. You
can also cancel the Traffic Announcement broadcast by keeping pressing the [SRC] button for more than 1 second. Canceling TA standby mode 1. When "TA"
is displayed on the screen, touch the [Options] key. 2. Touch the [Off] key of the TA item. "TA" on the screen goes off, and the TA standby mode is canceled.
PTY (Program Type) function This function enables you to listen to a broadcast of the specified program type when the broadcast starts, even if the system
operates in a mode other than the Tuner mode. Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY
broadcast station. VZ509E 23 Selecting PTY PTY seek 1. Touch the [Options] key. 2. Touch the [PTY Select] key to display the PTY Select screen. 3. Touch
your desired PTY Preset key to select the program type. If no operation is made within 7 seconds, the system will return to the Options screen.
You can also select a program type from the Items screen. 4. Touch a Seek key. If you touch the [{ (P-seek)] key, the system seeks a PTY broadcast moving up
the frequencies. If you touch the [} (P-seek)] key, it seeks moving down the frequencies.
If no station with the selected PTY broadcast can be received, the unit returns to the previous mode. English Owner's manual 1. Touch the [Options] key. 2.
Touch the [On] key of the PTY item to enter the PTY standby mode.
3. Touch the [PTY Select] key to display the PTY Select screen. If no operation is made within 7 seconds, the system will return to the Options screen. 4.
Touch your desired PTY Preset key to select the program type. The following table shows the factory default settings stored for the Preset keys: Preset number
1 2 3 4 5 6 PTY item ENGLISH News Info Pop M Sport Classics Easy M Contents News Information Pop music Sport Classics Easy listening music PTY
preset memory 1. Touch the [Options] key. 2. Touch the [PTY Select] key. 3.
Touch the [Item] key to display the Items screen. If no operation is made within 7 seconds, the system will return to the Options screen. 4. Touch the desired
PTY Item key to select the program type you wish to store. You can scroll the list by touching [{] or [}] key. 5. Touch the [Back] key to display the PTY Select
screen. 6. Touch and hold the desired PTY Preset key you wish to store the currently selected program type for more than 2 seconds. The 29 types of PTY
listed below can be selected.
PTY item ENGLISH News Affairs Info Sport Educate Drama Culture Science Varied Contents News Current Affairs Information Sport Education Drama
Culture Science Varied 5. Touch the [Back] key to return to the previous screen. Canceling PTY standby mode 1. Touch the [Options] key. 2.
Touch the [Off] key of the PTY item. "PTY" goes off, and the PTY standby mode is canceled. Canceling PTY interrupt broadcast 1. Touch the [Back] key
during receiving the PTY interrupt broadcast. The PTY interrupt is canceled, and the system returns to PTY standby mode.
You can also cancel the PTY interrupt broadcast by keeping pressing the [SRC] button for more than 1 second. Changing the PTY language 1. Touch the
[Options] key. 2. Touch the [PTY Language] key to display the PTY Language screen. 3. Touch the desired Language key you wish to set. 4. Touch the [Back]
key to return to the previous screen. 24 VZ509E Pop M Rock M Easy M Light M Classics Other M Weather Finance Children Social Religion Phone in Travel
Leisure Jazz Country Nation M Oldies Folk M Document Pop Music Rock Music Easy Listening Music Light Classical Music Serious Classical Music Other
Music Weather Finance Children's Programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk
Music Documentary DVD Video Operations Selecting the DVD Video mode 1.
Set a DVD video disc to the DVD player. The system will automatically read the disc data, change to the DVD mode (DVD Video mode), and start playback
after a while. See also "Setting/Ejecting a Disc" (page 16). English Owner's manual WARNING Some videos may be recorded at a higher volume level than
desired. Increase the volume gradually from the minimal setting after the video has started. For your safety, the driver should not watch the video or operate
the controls while driving. Please note that watching and operating the video while driving are prohibited by law in some countries. Note: For your safety,
this system has a safety function which turns off the picture when the car is moving, so only the audio can be heard. The picture can only be watched when the
car is stopped and the parking brake is applied.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
If "Audio Only" appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the
parking brake again.
Emergency broadcast If an emergency broadcast is received, all the function mode operations are stopped. "Alarm" appears on the screen and the emergency
broadcast can be heard. Canceling an emergency broadcast 1. Touch the [Back] key during receiving the emergency broadcast. The emergency broadcast is
canceled, and the system returns to the PTY standby mode.
You can also cancel the emergency broadcast by keeping pressing the [SRC] button for more than 1 second. Volume setting of TA, emergency broadcast
(Alarm) and PTY The volume for TA, Alarm and PTY interrupts can be set during TA, Alarm or PTY interrupt. The factory default setting is "15". 1. Use the
[VOL +] and [VOL ] buttons to set the volume to the desired level (00 to 33) during a TA, Alarm or PTY interrupt.
When the TA, Alarm, or PTY interrupt ends, the volume returns to the level before the interrupt. When a DVD video disc is already set 1. Press the [SRC]
button to display the Source screen. 2. Touch the [DVD] key to select the DVD Video mode. The system changes to the DVD mode (DVD Video mode), and
starts playback from the previous position. VZ509E 25 Changing the DVD System Settings Note: If the Setup operation is performed in the middle of DVD
video play, the disc will restart from beginning. When watching through a wide type of the rear monitor (16:9) Wide: English Owner's manual Displaying the
DVD Setup screen 1. Touch the screen to display the DVD Video mode screen. 2.
Touch the [Options] key to display the Options menu. 3. Touch the [Setup] key to display the Setup screen. When watching through a conventional type of the
rear monitor (4:3) Pan Scan: The leftmost and rightmost areas of the screen are cut off. Touch the [}] key to display the next page. Touch the [{] key to return
to the previous page. This function allows displaying the important part of image fully on the screen. In some cases, image is displayed while being panned
(scrolled). Letter Box: A black zone is created in the top and bottom areas of the screen. 4.
Perform setting for the desired setting items. See the following sections for detail. In the following sections, only the details of settings are described, the
procedures to select items are skipped. 5. Touch the [Back] key.
This method displays Cinema Scope and Vista Vision images without cutting them off by creating a black zone on the top and bottom gaps. Setting up the
angle mark display You can set up so that the angle mark appears on scenes where the angles can be switched. The factory default setting is "Off". 4-1. Touch
the [On] or [Off] key of the Angle item to turn the Angle function ON or OFF.
Setting up the screen size Set up the screen size according to the optional rear monitor which is connected to this unit. The factory default setting is "Wide".
4-1. Touch the [Wide], [PS], or [LB] key of the TV Display item to change the screen size to "Wide", "Pan Scan" or "Letter Box". 26 VZ509E Setting up the
disc menu language The factory default setting is "English". 4-1. Touch the []] key of the Menu Language item. 4-2. Touch the desired Language key you wish
to set. 4-3.
Touch the [Back] key. Setting up the country code English Owner's manual Set up the country number for setting up of the parental level. The factory default
setting is "7166" (U.K.). 4-1. Touch the []] key of the Country Code item. 4-2. Touch the ten-key (0 to 9) to input a 4-digit country code (see the following
table). 4-3.
Touch the [ENT] key. Country code list: Country ALBANIA ANDORRA AUSTRIA BAHRAIN BELGIUM BOSNIA AND HERZEGOWINA BULGARIA
CROATIA (local name: Hrvatska) CYPRUS CZECH REPUBLIC DENMARK EGYPT FINLAND FRANCE (FRANCE,METROPOLITAN) GERMANY
GREECE HUNGARY ICELAND IRAN (ISLAMIC REPUBLIC OF) IRAQ IRELAND ISRAEL ITALY Input code 6576 6568 6584 6672 6669 6665 6671 7282
6789 6790 6875 6971 7073 7082 7088 6869 7182 7285 7383 7382 7381 7369 7376 7384 Setting up the audio language The factory default setting is
"English". 4-1. Touch the []] key of the Audio Language item. 4-2.
Touch the desired Language key you wish to set. 4-3. Touch the [Back] key. Setting up the subtitle language The factory default setting is "English". 4-1.
Touch the []] key of the Subtitle Language item. 4-2. Touch the desired Language key you wish to set. To turn off the subtitle, select the [Off] key. 4-3. Touch
the [Back] key. Setting up the password for setting up of the parental level The factory default setting is "0000". 4-1. Touch the []] key of the Password item.
4-2.
Touch the ten-key (0 to 9) to input a 4-digit password. Input the old password, and touch the [ENT] key. Input "4356" to reset password. Input a new
password, and touch the [ENT] key. Input the same new password again, and touch the [ENT] key. Note: When a disc with view restrictions is inserted, you
will be prompted to input a password. The disc will not be viewable until the correct password is entered. VZ509E 27 JAPAN 7480 7479 7587 7666 7683
7673 7685 7775 7784 7767 7876 6578 7879 7977 8076 8084 8165 8279 8377 8365 8375 8373 9065 6983 8390 8369 6772 8389 8482 6569 7166 8665 8969
8985 7079 7173 7176 8374 Setting up the parental level You can change the level of parental lock (audiovisual restriction). This function allows cutting
scenes that are unfavorable for children or replacing them automatically with other scenes prepared in advance. For example, by replacing scenes of radical
violence or portrayals of sex with safe scenes, you can make a trouble-free story as if it were so from the beginning.
The factory default setting is "8". 4-1. Touch the [] or [+] key of the Parental Level item. The Password input screen is displayed. 4-2.
Touch the ten-key (0 to 9) to input a 4-digit password, and touch the [ENT] key. The factory default setting of the password is "0000". 4-3. Touch the [] or [+]
key to select level "1" to "8", or "Off". The relationship between DVD video category codes and parental level are shown in the following table.
Use this table when setting the parental level. LEVEL7 NC-17 (NO ONE 17 AND UNDER ADMITTED) R (RESTRICTED) PG-13 (PARENTS STRONGLY
CAUTIONED) PG (PARENTAL GUIDANCE SUGGESTED) G (GENERAL AUDIENCES) English Owner's manual JORDAN KUWAIT LEBANON
LESOTHO LIECHTENSTEIN LUXEMBOURG MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF MALTA MONACO NETHERLANDS
(NETHERLANDS ANTILLES) NORWAY OMAN POLAND PORTUGAL QATAR ROMANIA SAN MARINO SAUDI ARABIA SLOVAKIA (Slovak Republic)
SLOVENIA SOUTH AFRICA SPAIN SWAZILAND SWEDEN SWITZERLAND SYRIAN ARAB REPUBLIC TURKEY UNITED ARAB EMIRATES UNITED
KINGDOM Vatican City State YEMEN YUGOSLAVIA FAROE ISLANDS GIBRALTAR GREENLAND SVALBARD AND JAN MAYEN ISLANDS LEVEL6
LEVEL4 LEVEL3 LEVEL1 The contents that the parental level restricts vary with the country code.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
28 VZ509E Operating a DVD video Watching a DVD Video After disc loading, the play mode is automatically engaged. When playback is not started, touch
the [p] key. Operations may differ depending on the story of the disc. About the volume adjustment when playing DVD Video discs This system has the
independent volume data for playing DVD Video discs. The volume setting during DVD playback does not affect the volume of the other modes, and the
volume setting in the other modes does not affect the DVD playback. When the DVD menu is displayed For general DVD Video discs, the DVD menu may
appear. After the DVD menu is displayed, select an item in the operations described as follows. [Normal]: The image is expanded so that the top and bottom
edges of the image fit to the screen, and that the aspect ratio of the image becomes 4:3.
The aspect ratio of the image may be changed. [Wide]: The image is expanded so that the left and right edges of the image fit to the screen. The top and
bottom areas of the image may be cut off. 3. Touch the [Hide] key to return to the playback screen. English Owner's manual DVD menu operations Showing
the DVD menu 1. Showing the DVD Video mode screen, touch the [Top Menu] or [Title Menu] key during playback. The DVD menu appears. The displayed
contents for each key differ depending on the DVD software. An example shown below is the DVD menu display: Showing the DVD Video mode screen The
DVD Video mode screen is used to control the playback mode from the screen.
1. Touch the screen. The DVD Video mode screen is displayed. If you do not touch the screen for 7 seconds, the display will return to the playback screen.
Selecting the screen size You can change the screen size to suit to the playback film.
The factory default setting is "Full Wide". 1. Touch the screen to display the DVD Video mode screen. 2. Repeat touching the [S-Size] key until your desired
screen size is selected.
This key shows the current screen size setting. [Full Wide]: The image is expanded so that the rectangle of the image fits to the screen (16:9). The aspect ratio
of the image may be changed. [Cinema]: The image is expanded so that the top and bottom edges of the image fit to the screen. Suitable for letterbox-format
images. Subtitles of non-letterboxed images may be cut off in this mode. Operating the DVD menu You can operate the menu items by displaying the Key Pad
panel. 1. Showing the DVD Video mode screen, touch the [Cursor] or [10key] key. The Cursor-Key Pad panel or the NumericKey Pad panel is displayed on
the screen.
Touching the [Num] key or [Cur] key changes to the each other panel. 2. Select the desired menu item using either the Cursor-Key or the Nummeric-Key
according to the menu contents. 3. Touch the [ENT] key to specify the selected menu item. 4. Touch the [Back] key to hide the Key Pad panel. VZ509E 29
Switching Key Pad position When the menu items become difficult to view by the Key Pad buttons, you can move the Key Pad panel to the other side of the
screen. Key Pad Slow playback 1. Showing the DVD Video mode screen, touch the [p] key during playback to pause playback.
2. Touch and hold the [{ (Chapter)] key. While touching the key, slow playback continues at 1/3 speed. Releasing the key resumes the normal playback. Slow
playback cannot be performed in the backward direction.
In addition, audio cannot be reproduced during slow playback. English Owner's manual Fast forward and fast backward 1. Showing the DVD Video mode
screen, touch and hold the [{ (Chapter)] or [} (Chapter)] key during playback. [{ (Chapter)] key: Fast forward [} (Chapter)] key: Fast backward The
playback speed becomes 4-time faster at first and then 16-time faster 3 seconds later. Releasing the key resumes the normal speed playback.
No audio is reproduced during fast forward and fast backward operation. The fast forward and fast backward speed may differ depending on the disc. Key
Pad Skipping chapters (searching) Stopping playback 1. Showing the DVD Video mode screen, touch and hold the [p] key for more than 1 second during
playback. Playback is stopped. 2. To resume playback, touch the [p] key. Playback resumes from the scene where playback is stopped. "Chapter" means a
small segment to divide the "Title" (film) which is recorded on the disc. 1.
Showing the DVD Video mode screen, touch the [{ (Chapter)] or [} (Chapter)] key during playback. Chapters are skipped as many as the times touching the
key, and playback starts. Current location Pausing playback 1. Showing the DVD Video mode screen, touch the [p] key during playback. Playback pauses. 2.
To resume playback, touch the [p] key again. Playback resumes. Chapter down Chapter Chapter up Touching the [{ (Chapter)] key starts playback from the
beginning of the next chapter. 30 VZ509E Touching the [} (Chapter)] key starts playback from the beginning of the current chapter.
When touching this key again within about 4 seconds, playback starts from the beginning of the previous chapter. Searching with a chapter/title number You
can locate the beginning of a scene using the chapter numbers or title numbers recorded on the DVD video disc. "Chapter" means a small segment to divide
the "Title" (film) which is recorded on the disc. 1. Showing the DVD Video mode screen, touch the [Options] key.
2. Touch the [Direct] key. The Key Pad screen appears. You can specify the title number by touching the [Title] key. 3.
Input the chapter number that you want to play back using the [0] to [9] key. 4. Touch the [ENT] key. Playback starts from the scene of the input chapter
number of the selected title. If the input chapter number does not exist or searching with a chapter number is not allowed, the screen image will not change. 2.
Touch the [Audio] key during playback. Each time you touch the key, you can switch among audio languages. Depending on the disc, up to 8 audios may be
recorded. For details, see the mark of the disc ( 8 : Indicates that 8 audios have been recorded).
Depending on the disc, switching may be completely impossible or impossible on some scenes. It may take time to switch among audios. When the power is
turned on and the disc is changed to a new one, the language set as the factory default is selected. If that language has not been recorded, the language is
specified on the disc. 3. Touch the [Back] key to return to the previous screen. English Owner's manual Switching subtitles On DVD discs in which two or
more subtitle languages have been recorded, you can switch among the subtitle languages during playback. 1. Showing the DVD Video mode screen, touch
the [Options] key. 2.
Touch the [Subtitle] key during playback. The Subtitle Language screen appears. 3. Touch the Language key you wish to display. Depending on the disc, up to
32 kinds of subtitles may be recorded.
For details, see the mark of the disc ( 8 : Indicates that 8 kinds of subtitles have been recorded). To turn off subtitles, select "OFF".
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
Depending on the disc, switching may be completely impossible or impossible on some scenes. It may take time to switch among subtitles. 4.
Touch the [Back] key to return to the previous screen. Repeat playback This operation plays back the current title or chapter repeatedly. 1. Showing the DVD
Video mode screen, touch the [Options] key. 2. Touch the [Title] or [Chapter] key of the Repeat item, then touch the [Back] key. The "T.RPT" or "C.RPT" will
be displayed. 3.
Touch the [Back] key to return to the previous screen. 4. Perform the same operation to turn off the repeat playback. Switching among languages On discs in
which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback. 1. Showing the DVD Video
mode screen, touch the [Options] key. VZ509E 31 Switching angles Audio CD Operations This system is a CD TEXT compatible model, and supports the
display of the DISC TITLE, TRACK TITLE, and TRACK ARTIST (or DISC ARTIST) of the CD TEXT. Note: This unit supports only CD TEXT in English.
Also, some character data may not be reproduced properly on the display. English Owner's manual On DVD discs in which video images have been recorded
in two or more angles, you can switch among the angles during playback.
When the Angle function is set to "On", the angle mark will appear on scenes where the angles can be switched (see page 26). 1. Showing the DVD Video
mode screen, touch the [Angle] key during playback. Each time you touch the key, you can switch among angles. Depending on the disc, up to 9 angles may
be recorded.
For details, see the mark of the disc ( : Indicates multi-angle). Depending on the disc, angles may switch smoothly or switch with a momentary still image.
Depending on the disc, switching may be completely impossible or impossible on some scenes. It may take time to switch among angles. Depending on the
disc, scenes recorded in two or more angles may be played back.
When the power is turned on and the disc is changed to a new one, the language set at the time of factory shipment is selected. If that language has not been
recorded, the language is specified on the disc. Selecting the CDDA mode 1. Set an audio CD to the DVD player. The system will automatically read the disc
data, change to the DVD mode (CDDA mode), and start playback after a while. See also "Setting/Ejecting a Disc" (page 16). Displaying/hiding the playback
status 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [On] or [Off] key of the P.
Time item during playback. 3. Touch the [Back] key to return to the previous screen. Playback status is displayed on the screen. Title number Chapter number
Playback time T01 C0 0 1 00 : 00 : 19 WARNING Some CDs may be recorded at a higher volume level than desired. Increase the volume gradually from the
minimal setting after playback has started. For your safety, the driver should not operate the controls while driving. When an audio CD is already set 1. Press
the [SRC] button to display the Source screen. 2.
Touch the [DVD] key to select the CDDA mode. The system changes to the DVD mode (CDDA mode), and starts playback from the previous position. 32
VZ509E Operating an audio CD Listening to an audio CD After disc loading, the play mode is automatically engaged. When playback is not started, touch the
[p] key. Pausing playback 1.
Touch the [p] key during playback. Playback pauses. 2. To resume playback, touch the [p] key. Playback resumes.
Track random playback: Touch the [Track] key of the Random item. This operation plays back all tracks on the disc in no particular order. "T.RDM" is
displayed on the screen. You can also specify this function by touching the [Random] key on the CDDA mode screen. 3. To cancel the play, touch the [Track]
key of the function to cancel. 4. Touch the [Back] key to return to the previous screen. English Owner's manual Scrolling track titles When a title or name
displayed on the screen is longer than the text area, you can confirm the entire text by scrolling it.
1. Displaying the text you wish to scroll, touch the text area. The text will scroll once. Skipping a track (searching) 1. Touch the [{ (Track)] or [} (Track)] key
during playback. Tracks are skipped, as many as the times the key is touched, and playback starts. Touching the [{ (Track)] key starts playback from the
beginning of the next track. Touching the [} (Track)] key starts playback from the beginning of the current track. When this key is touched again within about
2 seconds, playback starts from the beginning of the previous track. MP3/WMA/AAC Operations This system can playback MP3/WMA/AAC files recorded on
a disc.
About the MP3/WMA/AAC files What is MP3/WMA/AAC? MP3, WMA, and AAC are the audio file formats which have penetrated into PC users and become
a standard format. MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. WMA (Windows Media Audio) is an audio
compression method developed by Microsoft Corporation. AAC (Advanced Audio Coding) is a newer audio compression method developed for used with
video compression standards MPEG-2 and MPEG-4, and has been adopted as the standard audio format of the iPod and iTunes by Apple Inc. @@@@Touch
and hold the [{ (Track)] or [} (Track)] key during playback.
@@@@Touch the [Options] key. 2. Touch the [Track] key of the function you want to play. Track repeat playback: Touch the [Track] key of the Repeat item.
This operation plays back the current track repeatedly.
"T.RPT" is displayed on the screen. @@@@ The ID3 version 2.x tag format is not completely supported. @@@@ Set the Sampling Frequency to 44.1 or 48
kHz. Set the Bit Rate to within ranges from 16 to 320 kbps (VBR). @@@@When a file cannot be played, the next file is played instead. @@ You can apply
the VBR (Variable Bit Rate) format when encoding. @@@@@@@@ Set the Bit Rate to 48, 64, 80, 96, 128, 160, or 192 kbps.
@@Otherwise, playback will be impossible. @@@@@@@@@@@@Folders containing no MP3/WMA/ AAC/DivX file are not displayed. Folder hierarchy
(1 to 4 in illustration) is ignored, and unified into one level. Folders are arranged in the order of the folder creation. 1 2 1 3 4 2 4 3 When a disc is already set
1. Press the [SRC] button to display the Source screen. 2. Touch the [DVD] key to select the MP3/WMA/ AAC mode. The system changes to the DVD mode
(MP3/ WMA/AAC mode), and starts playback from the previous position. English Owner's manual Operating MP3/WMA/AAC playback Note: The same
operations listed below are also used in the USB Memory mode.
Listening to MP3/WMA/AAC files After disc loading, the play mode is automatically engaged. When playback is not started, touch the [p] key. Selecting the
MP3/WMA/AAC mode 1. Set a disc which the MP3/WMA/AAC files are recorded to the DVD player. The system will automatically read the disc data, change
to the DVD mode (MP3/WMA/ AAC mode), and start playback after a while.
You're reading an excerpt. Click here to read official CLARION
VZ509E user guide
http://yourpdfguides.com/dref/3338904
Powered by TCPDF (www.tcpdf.org)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising