Russell Hobbs RHCV15AS04 vacuum cleaner Instruction manual
Below you will find brief information for vacuum cleaner RHCV15AS04. This vacuum cleaner is a compact and powerful appliance with a cyclonic system to help you clean your home quickly and easily. The vacuum is bagless, so there is no need to purchase replacement bags, and it has a range of features to help you tackle any cleaning job. The vacuum cleaner also has a number of features that make it easy to use, such as a telescopic handle and a cord rewind button.
Advertisement
Advertisement
Compact Cyclonic
Bagless Cylinder Vacuum Cleaner
Model Number: RHCV15AS04
220-240V AC 50/60Hz 1000W
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
PLEASE RETAIN
FOR FUTURE REFERENCE
CONTENTS
Safety instructions
Energy performance label
Technical data
Vacuum feature diagram
Vacuum cleaner assembly
Using your vacuum cleaner
Cleaning and care
Problem solving
Guarantee and customer services
Spare parts
Connection to the mains supply
Notes
Disposal information
Thank you for purchasing your Russell Hobbs Compact Cyclonic Bagless
Cylinder Vacuum Cleaner.
To get the best from your new cleaner, take a few moments to read these instructions and keep them in a safe place for future reference.
Should you require any further assistance, our friendly Product Care team will be happy to help.
21
22
23
24
Page(s)
3-6
7
8
9
10-11
12-14
15-18
19
20
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
2
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING:
• It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• This product is intended for household use only.
Do not use outdoors.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Do not operate this appliance for anything other than its intended use. This product is intended for household use only. Do not use outdoors.
• Do not immerse in water or other liquids for cleaning.
3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
• Do not direct at people, animals, electrical outlets, or equipment containing electrical components.
• Unplug from outlet when not in use. Do not leave the cleaner unattended while plugged in.
• Do not use with damaged cord or plug.
• Do not use vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into water.
• Keep the vacuum cleaner away from water; do not allow it to get wet. If unit is wet, do not plug unit into wall socket or turn unit on.
• Do not handle the vacuum cleaner with wet hands.
• Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, or expose cord to heated surfaces.
• Do not unplug by pulling on cord.
• To protect against electrical shock do not immerse cord, plug, or appliance in water or other liquid.
• Unplug from the mains outlet when not in use, before putting on and taking off parts, and before cleaning.
• The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock or injury. Only use the accessories supplied by the manufacturer.
4
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING:
• Do not let the cord hang over the edge of the worktop, or touch hot surfaces.
• Do not use this vacuum to pick up water or any other liquids, combustible substances or hot/burning objects.
• Only use the unit when fully assembled.
• Never place your fingers or other objects into any part of the cleaner. Be aware that loose clothing or hair may become trapped in the cleaner if improperly used.
• Before use, ensure that all of the air vents of the cleaner are clear and there is no restriction of air flow.
• When cleaning stairs, ensure the cleaner is on a step below you. NEVER place the cleaner above.
• Caution: Exhaust air discharged from the rear of the cleaner may extinguish a gas fire, pilot light, or disturb ashes in an open fire. Always avoid directing the cleaner toward naked flames.
5
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
• Important: This cleaner has a thermal safety device which automatically cuts off the power supply in case of over heating. If the safety device has switched the cleaner off, unplug from the mains, allow the cleaner to cool down and check and clear any blockages. Once the cleaner has cooled it can be plugged back in to the mains and used as normal.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
6
ENERGY PERFORMANCE LABEL
3
5
The purpose of the energy label is to help you understand a vacuum cleaner’s energy efficiency performance.
RHCV15AS04
1
2
4
6
1. Energy rating – based primarily on energy consumption and pick-up.
2. Annual energy
usage – the amount of energy used over a year.
3. Emissions – the amount of dust in the air emitted from the machine’s exhaust.
4. Noise – the noise level produced by the machine, measured in decibels.
5. Pick up (carpets) – the rating of how much dust the machine picks up from carpets.
6. Pick-up (hard
floors/crevices) – the rating of how much dust the machine picks up from hard floors and crevices.
7
TECHNICAL DATA (PRODUCT FISCHE)
Trade mark Russell Hobbs
Model RHCV15AS04
Energy efficiency class
Annual energy consumption
(kWh/year)
C
40 kwh / annum
Carpet cleaning performance class E
Hard floor cleaning performance class
B
Dust re-emission class G
Sound power level
Rated input power
89dB
1000 W
8
1.
VACUUM FEATURE DIAGRAM
3.
4.
5.
6.
7.
2.
8.
1
2
3
4
5
Extension tubes
Floor head
Power button
Container release button
Carry handle
9.
10.
6
7
8
9
10
Hose connector
Hose
Cord rewind button
Dust container
2 in 1 crevice tool
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
9
VACUUM CLEANER ASSEMBLY
Before using your vacuum cleaner
Remove all packaging and lay out the separate components.
Check the unit after unpacking for any visual damage such as:
• Misaligned or damaged parts
• Damage to the main body and separate components
• Damage to the plug or cable.
If you can see any damage do not use the vacuum cleaner and contact customer services.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
10
VACUUM CLEANER ASSEMBLY
Ensure the unit is unplugged before assembling.
1. Place the dust container into the vacuum cleaner unit, base first.
Push until it secures into place with a click.
2. Insert the hose connector into the hose outlet, aligning the grooves in the outlet with the clips on the connector. Turn the hose attachment clockwise to secure into place.
3. Insert the end of the hose into the top of the extension tube and firmly push together.
4. Insert the other end of the extension tube into the floor head and rotate if necessary.
1
2
3
4
11
USING YOUR VACUUM CLEANER
Once assembled:
1. The cord is stored inside the unit. Pull the power cord out of the machine to as long as you require and stop when you see the yellow tab. Do not over-extend. If the red tab is visible, then wind the cord back in by pressing the cord rewind button until only the yellow tab is visible.
2. Plug the cable into a wall socket and press the switch on.
3. Press the power button to start vacuuming.
4. Move the vacuum cleaner floor head in a forwards and backwards motion over the areas you would like to clean.
Note: Large items can get trapped in the brush/floor head which could cause the unit to overheat. Make sure you pick up larger items that could cause a blockage before vacuuming.
1 2
3
12
USING YOUR VACUUM CLEANER
5. You can adjust the extension tube length to a comfortable cleaning height. To alter the length of the telescopic handle, a) Press and hold the extension lock in the direction indicated. b) Slide the steel pole, up or down, to the correct length.
6. The suction power of the floor head can also be adjusted. To use less suction power, slide the suction control tab to the open position. For maximum suction power, slide the tab to the closed position.
b)
5
6 a)
Tools can be attached to the extension tube or the hose:
7. The 2 in 1 crevice/brush tool is for narrow gaps and hard to reach places. To adapt the 2 in 1 tool for use as a brush on delicate surfaces, rotate the head of the tool in the direction indicated until it extends out.
7
When using the floor head, attach to the end of the telescopic tube. Then adapt the brush depending on floor type.
8. To clean on hard floors, push the surface selector in so the icon shows a brushed head (refer to diagram.)
9. To clean on carpets, push the surface selector down so the icon shows a smooth head (refer to diagram.)
8
9
13
1
USING YOUR VACUUM CLEANER
Emptying the dust container
When the dust container is filled to the Max line, it will need to be emptied.
1. To remove the dust container, press the container release button located on the carry handle. Lift the container away from the vacuum cleaner unit.
2. Locate the dust emptying button near the bottom of the dust container and press to release the dust carefully over a bin. You may need to tap the sides to empty all of the dirt. Close the base to secure.
Important: You may wish to empty the dust container outdoors as emptying may create a dust cloud.
3. Place the dust container back into the vacuum cleaner unit, base first. Push until it secures into place with a click.
2
14
CLEANING AND CARE:
CLEANING THE EXTERNAL FILTER
Before you clean the appliance, disconnect the mains plug from the wall socket.
1. Remove the filter cover on the back of the cleaner by pushing the tab downwards and pulling the cover away.
2. Remove the filter and tap over a bin to remove any excess dust.
Wash in warm water and allow to dry for 24 hours.
3. Once dried, put the filter back into the cover and refit the assembly on the back of the vacuum cleaner by pushing inwards until secure.
1
2
15
2
CLEANING AND CARE:
CLEANING THE DUST CONTAINER HEPA FILTER
1. Remove the dust container by pressing the container release button and lifting away from the vacuum cleaner unit.
2. Rotate the lid so that the arrow on the back of the lid is aligned with the unlock symbol on the back of the dust container. Lift off the lid.
3. Remove the dust container filter assembly by turning the filter in the direction of the OPEN lock symbol. Pull the filter cover off the
HEPA filter and remove excess dirt by tapping the filter over a bin.
4. Wash the filter in warm water only and allow to dry for 24 hours.
3
5. Slot the filter cover back on to the HEPA filter. Place the filter assembly back onto the underside of the lid and turn in the direction of the CLOSE arrow to secure.
6. Place the lid onto the container with the arrow aligning with the unlock symbol. Make sure the entire lid is correctly sat on the container as it is a tight fit. To secure, turn the lid so the arrow aligns with the lock symbol.
5
6
16
CLEANING AND CARE
Disassembly
1. Press the cord rewind button to automatically bring the cord back inside the unit for storage.
2. To remove the extension hose, manoeuvre it away from the hose connector.
3. To remove the floor head/accessory, pull the extension tube/hose connector away from the head/accessory – you may need to ease it off.
4. To remove the hose, twist the attachment anti clockwise and pull away.
1
2
3 4
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
17
CLEANING AND CARE
To clean the exterior of the device, use a damp, soft cloth and mild detergent.
NEVER IMMERSE THE VACUUM IN WATER.
Wash non-electrical removable accessories in warm soapy water and allow to dry thoroughly before next use.
If the vacuum is damaged, contact the customer service helpline using the details at the bottom of this page.
Storage
Store in a clean and dry environment.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
18
PROBLEM SOLVING
PROBLEM POSSIBLE PROBLEM POSSIBLE SOLUTION
The vacuum cleaner is
Power cord/plug damage Check the power cord and plug for signs of damage.
plugged in but does not work
Fuse is damaged Check and replace the fuse in the plug.
The suction is decreasing and the vacuum is not picking up dirt
Dust container
Filters are dirty
Hose/head blockages
Vacuum cleaner is over heating
Filters are dirty
Check if the dust container is full, if so, empty it.
Clean the filters.
Check that there are no blockages in the hose or cleaning head.
Check that the filters are not blocked, if so, clean them following the instructions in this booklet.
Automatic power cord rewind does not fully rewind the power cord
Dust is coming out of the vacuum cleaner
Dust container fitting
The air coming out of the vacuum cleaner smells
Filters are dirty
Filters are not dry
Pull the power cord fully out and press the rewind button again.
The dust container has not been fitted correctly. Refit the container following the instructions in this booklet.
Clean the filters. Also clean the hose and dust container
Ensure the filters have been left to dry for 24 hours before refitting back into the vacuum cleaner and using.
We’re here should you need us.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
19
GUARANTEE AND CUSTOMER SERVICES
At Russell Hobbs, we take all our customer feedback seriously.
Feel free to contact our Product Care Team, on 0345 209 7461
Monday – Friday: 8am-8pm & Saturday: 9am – 1pm, who will be more than happy to assist you.
This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
•
The product must be returned to the retailer with the original proof of purchase.
•
The product must be installed and used in accordance with the instructions contained in this instruction guide and any other instructions for use which are supplied.
•
It must be used for domestic purposes only and for its intended use.
•
This warranty does not cover wear and tear, damage, misuse or consumable parts.
This does not affect your statutory rights.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
20
SPARE PARTS
To check the availability of the following spare parts, simply contact our friendly Customer Services team using the details provided at the bottom of this page.
Dust Container HEPA Filter
Exhaust Filter
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
21
CONNECTION TO THE MAINS SUPPLY
This appliance is designed to operate from a mains supply of
220-240V~ 50/60Hz.
Check that the voltage marked on the product corresponds with your supply voltage.
How to change the fuse
1. Slot the end of a screwdriver into the recess in the fuse holder of the plug.
2. Pull the fuse holder upwards until free of the plug and slide the fuse out.
3. Replace the fuse and replace fuse holder, pushing down until locked into place.
Important: Only ever use 13 amp fuses.
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
Or visit us at www.productcare.co.uk
22
NOTES
23
For Customer Services & Spare
Parts please call
0345 209 7461
Opening times: Monday - Friday
8am – 8pm & Saturday 9am –1pm
Or visit us at
www.productcare.co.uk
Revision 1
Model: RHCV15AS04
Site Code: 15A.08.16.228
Produced for ASDA Stores Ltd. Leeds, LS11 5AD.
This symbol is known as the 'Crossed-out wheelie bin Symbol'.
When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste. Only discard electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment. For your nearest disposal facility, visit www.recycle-more.co.uk or ask in store for details.
We reserve the right, due to possible changes to design, to alter the instruction manual without prior notice.
24

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Compact design
- Cyclonic technology
- Bagless operation
- Telescopic handle
- Cord rewind button
- Multiple filtration system
- 2 in 1 crevice tool
- Adjustable suction power
- Hard floor and carpet cleaning