COLOR TFT LCD MONITOR
User Manual
IMPORTANT SAFETY INSTRUCTIONS:
Please read manual before using this product.
Please keep manual for future reference.
Please read the cautions to prevent possible danger and loss of property
Please enjoy the benefits of convenience, safety, and space-saving from this
TFT LCD monitor in different ways.
FEATURES:
This product employs integrate circuits, lower power consumption, and lower radiation emission. It has fashion designed appearance and good portability.
HD-SDI、HDMI & YPbPr Input, to connect with Full HD Video Camera.
LED backlight display, support 1920×1080 HD resolution.
High contrast & dizzy-proof monitor with flexible folding sun shade cover, to see clearly under sunshine.
DC 6.5-24V wide range voltage.
Functions: Peaking Filter, False Colors, Exposure, Histogram, 5D-II
Camera, Center Marker, Pixel-to-Pixel, Color Bar, Screen Marker, Aspect
Ratio, Check Field, Underscan/Overscan, Freeze Input, H/V Delay and 4x
Zoom, Image Flip, Picture-in-Picture.
CAUTIONS：
1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product.
Other improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or thunder weather.
1
Contents
PRODUCT DESCRIPTION ----------------------
INSTALLATION OF SUNSHADECOVER
AND BATTERY PLATE---------------------------
DV BATTERY MOUNT PLATE-----------------
SETTING MENU -----------------------------------
ACCESSORIES -------------------------------------
PARAMETER ---------------------------------------
TROUBLESHOOTING ---------------------------
2
PRODUCT DESCRIPTION
1．POWER：ON/OFF (Light turns to red when power on.)
2．VIDEO: Indicator lights up when signal switch to video state.
3．YPbPr: Indicator lights up when signal switch to YPbPr state.
4．HDMI: Indicator lights up when signal switch to HDMI state.
5．SDI: Indicator lights up when signal switch to SDI state (optional).
6．F1、F2、F3、F4：User-definable buttons.
Default functions:
F1 Peaking F3 Exposure
F2 False Color
F4 Histogram
（function customized to meet your needs）
7．Knob BRI/M/SEL：Press the knob to access the menu function, pressing the knob in the menu to return to the previous page or exit the menu.
Rotate knob to select an option.
Default as Brightness function.
8．Knob SAT/ADJ：Press the knob to select main MENU options; rotate knob to confirm the selection and adjust parameter values.
Default as Saturation function.
9．Knob TINT：Default as Tint function.
10．Knob CONTRAST: Default as Contrast function.
3
11. SDI signal output. (Optional)
12. Video signal output.
13. Video signal input.
14. Audio signal input.
15. SDI signal input. (Optional)
16. Y signal input
17. Pb signal input
18. Pr signal input
19. HDMI (High Definition Multimedia Interface) signal output.
20. HDMI (High Definition Multimedia Interface) signal input.
21. Mini USB input.
(Only for program upgrades, do NOT use if non-professionals)
22. Power cable interface (connecting to the battery plate).
23. DC power input.
24. 4-pin XLR DC power input.
Pin number Signal
①
②③
④
25. Battery power on/off switch.
GND
……...
+12V
4
INSTALLATION OF SUNSHADE COVER
AND BATTERY PLATE
Installation of sunshade cover： Disassembly of sunshade cover：
Installation steps Installation completed Disassembly steps Disassembly completed
Steps of sunshade cover on / off:
* Please follow the instructions steps, or may damage the cover.
Open Step: Closed steps:
* Do not press the edge in the under of the cover, otherwise it will result in open failure.
5
DV BATTERY MOUNT PLATE:
Standard mounts process
Following three types of battery plates are suitable for this device, model
F970&QM91D are standard accessories, model DU21 is for optional.
DV Battery Mount Plate:
Model DU21 for battery of Panasonic DV:
NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.
Model QM91D for battery of SONY DV:
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV116/DC
R-DVD/PS105K/300K/10P/1E series.
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700,
GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,
HVR-V1C, FX7E F330.
V-mount battery plate (optional):
Please refer to GP-L130AB type battery specifications.
6
Anton Bauer mount battery plate (optional):
Please refer to GP-L130B type battery specifications.
SETTING MENU
Before setting the functions, please make sure the device is connected correctly.
When power on, press BRI/M/SEL knob on the device, function menus will pop-up on the screen. After confirm the option value, then press BRI/M/SEL knob to return to the previous, and press the BRI/M/SEL knob again to exit the menu settings.
BRI / M / SEL knob to select an option.
SAT / ADJ knob to select the main menu, adjusting option values and confirm the selection.
ITEMS OPTIONS
Color Temp 6500º K/9300 º
Red Note: Only available
Green under “User” mode to
Blue meet the color value you need.
Check Field OFF，MONO，Red, Green and
Blue
Aspect Ratio Full Screen,4:3 and 16:9
Pixel-to-Pixel ON/OFF
Camera
H/V delay
480P
(5DII Mode)
/ 1080I
(5DIII Mode)
OFF,H&V Delay, V Delay and H
Delay
Underscan ON/OFF
7
ITEMS OPTIONS
Center Marker ON/OFF
Screen Markers OFF,
95%,93%,90%,88%,85% and80%
Function of buttons and knobs can be customized by users’ needs.
ITEMS OPTIONS
Language
PIP
English /Chinese
Small, Medium, Large, PBP, POP
In small, medium and large interface can adjust the source, position, and swap;
In PBP and POP interface can adjust the source and swap.
SDI
Input Format
ON/ OFF
5s、10s、15s
OSD
LOGO ON/ OFF
Freeze Input ON/ OFF
Image Flip
Peaking
ON/ OFF
Mono/ Color
Assistant Func. Manual/Auto
Manufacturer
Default
ISP
OK/Cancel(Reverse the SAT / ADJ knob to select "OK")
For program upgrades (Please reboot your computer if press accidentally!)
Functions of F1-F4 buttons can also be customized:
·Aspect Ratio·Check Field ·Freeze Input ·Center Marker
·Underscan ·H/V delay ·Color Bar ·Screen Marker
·Zoom
·Camera ·Pixel-to-Pixel
·PIP
·Peaking
·False Color
·Exposure ·Histogram.
Functions of R1-R4 buttons can also be customized:
·Contrast ·Brightness ·Saturation
·Tint ·Volume ·Sharpness
Note: Off, camera, X2, X4 and X8 options can be set when zoom function customized as shortcut key.
8
ACCESSORIES:
Standard accessories:
1. Flexible Folding Sun Shade Cover 1 piece
2. Battery Plate QM91D 1 piece
Battery Plate F-970 1 piece
3. Manual 1 copy
4. HDMI Type A-C 1 piece
5. DC Adapter 1 piece
Optional accessories
1. Anton Bauer Mount Battery Plate 1piece
2. V-mount Battery Plate 1piece
3. Shoe Mount (for camera only) 1piece
4. Li-ion Battery 1piece
5. Battery Plate: DU21 1piece
PARAMETERS:
Panel Size
7’’ TFT LCD
Resolution
Contrast
Viewing Angle
Input Voltage
Input Signal
Current
Power Consumption
Size:(LWD)
1024×600, support 1920×1080
800:1
160°/ 150°(H/V)
DC12V (XLR DC Connection)
HD-SDI
(optional)
, HDMI, YPbPr, AV
650mA
≤10W
194.5×150×38.5mm/48.5mm(with cover closed)
/158.5mm (with cover open)
Weight 480g / 640g (with cover)
9
TROUBLE SHOOTING
1. Only black-and-white display:
Check whether the color saturation is properly setup.
2. Power on but no pictures:
Check whether the cables of Video, HDMI, YPbPr and SDI are correctly connected. Please use the standard power adapter coming with the product package. Improper power input may cause the device.
3. Wrong or abnormal colors:
Check whether the cables are correctly and properly connected. Broken or loose pins of the cables may cause a bad connection.
4. When on the picture shows size error:
press“MENU→
→Underscan” to zoom in/out pictures automatically
when receiving HDMI (High-Definition Multimedia Interface) signals.
5. Other problems:
Please press “MENU” button and choose “
→Manufacturer Default →OK”
6. According to the ISP, the machine can not function properly：
ISP for program upgrades, non-professionals do not use. Please reboot your computer if press accidentally!
*It is normal to see some bright lines appear on the screen when turn off the device.
Note: due to constant effort to improve products and product features, specifications may change without notice.
10
11
