TC-32LX60 TC
Operating Instructions
LCD Television
Manual de instrucciones
Televisor LCD
Model No.
Número de modelo
TC-26LX60
TC-26LE60
TC-32LX60
TC-32LE60
Customer’s Record
The model number and serial number of this product can be found on its back cover. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
R
Anotación del cliente
El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el
espacio provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de
su adquisición, para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también
para disponer de los servicios que le ofrece la garantía.
For assistance, please call : 1-800-211-PANA (7262)
or contact us at www.panasonic.com/contactinfo
(U.S.A.)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com
(Puerto Rico)
For assistance, please call : 1-800-561-5505
Modelo
or visit us at www.panasonic.ca
Número de serie
(Canada)
Para solicitar ayuda, llame al: 1-800-211-PANA (7262)
o visítenos en www.panasonic.com/contactinfo
Panasonic Consumer Electronics
Company,
Division of Panasonic Corporation
of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Puerto Rico Inc.
(“PSC”)
Ave. 65 de Infanteria, Km 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
¤ 2006 Panasonic Corporation of North America. All Rights Reserved.
¤ 2006 Panasonic Corporation of North America. Todos los Derechos Reservados.
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
o visítenos en www.panasonic.com
(Puerto Rico)
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
English
Español
Printed in U.S.A.
Impreso en EE.UU.
(EE.UU.)
Para solicitar ayuda, llame al: 787-750-4300
[Resumen]
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
TQB2AA0661-2
Turn your own living room into a movie theater!
Experience an amazing level of multimedia excitement
Contents
•
Please read before using the unit
Important Safety Instructions ······················· 4
Camcorder
••
••
Accessories/Option ························· 6
Connection ····························· 7
Identifying Controls ························· 8
First Time Setup ·················· 9
Set Top Box
Basic Features
DVD recorder
Amplifier
Home theater
unit
VCR
••
••
••
••
•
••
••
••
••
•
FAQs, etc.
••
••
••
••
•
Watching TV··············································· 10
Watching Videos and DVDs ······················· 12
DVD player
Viewing
Enjoy your TV !
Quick Start Guide
Enjoy rich multimedia
Advanced Features
HDAVI Control™
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbols are trademarks of Dolby
Laboratories.
2
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
HDAVI Control™ is a trademark of
Matsushita Electric Industrial Co., Ltd.
FAQs, etc.
R
Remote Control Operation/Code List ········· 36
Ratings List for Channel Lock ···················· 39
Technical Information ································· 40
Maintenance ·············································· 42
FAQ ···························································· 43
Specifications ············································· 45
Limited Warranty (for U.S.A.) ····················· 46
Customer Services Directory (for U. S. A.) ······· 47
Limited Warranty (for Canada) ··················· 48
Español
[Resumen]
Accesorios/Opción ····································· 24
Conexiones ················································ 25
Identificación de los controles ···················· 26
Ajuste inicial ··············································· 27
Para ver la televisión ································· 28
Cómo utilizar las funciones de los menús ····· 30
Para ver vídeos y DVDs····························· 32
Control con HDMI “HDAVI ControlTM”········· 33
Conexiones AV recomendadas ·················· 34
Advanced
Input Labels/Closed Caption ····················· 13
How to Use Menu Functions
(picture, sound quality, etc.) ······················· 14
Channel Lock ············································· 16
Editing and Setting Channels ···················· 18
Operating Peripheral Equipment ··············· 20
Control with HDMI “HDAVI ControlTM” ········ 21
Recommended AV Connections ················ 22
3
Important Safety Instructions
The lightning flash with
arrow head within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
Note to CATV System Installer
This reminder is provided to direct the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
Secure ventilation
Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the LCD
TV and to protect it from overheating. These openings must not be blocked or covered. There should be at least 10 cm of space
from these openings. The openings should never be blocked by placing the LCD TV on a bed, sofa, rug or other similar surface.
This LCD TV should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
Important Safety Instructions for LCD TV
1)
2)
3)
4)
5)
6)
7)
8)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments / accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) Operate only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to
your home consult your television dealer or local power company.
16) Follow all warnings and instructions marked on the LCD TV.
EXAMPLE OF ANTENNA
17) Never push objects of any kind into this LCD TV through cabinet
GROUNDING AS PER
slots as they may touch dangerous voltage points or short out parts (NEC) NATIONAL
ELECTRICAL
ANTENNA
that could result in a fire or electric shock. Never spill liquid of any
LEAD-IN WIRE
CODE
kind on the LCD TV.
GROUND CLAMP
18) If an outside antenna is connected to the television equipment,
ANTENNA
be sure the antenna system is grounded so as to provide some
DISCHARGE UNIT
ELECTRIC
protection against voltage surges and built up static charges.
(NEC SECTION 810-20)
SERVICE
In the U.S. Section 810-21 of the National Electrical Code
EQUIPMENT
GROUNDING
provides information with respect to proper grounding of the mast
CONDUCTORS
(NEC SECTION 810-21)
and supporting structure, grounding of the lead-in wire to an
GROUND
CLAMPS
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
requirements for the grounding electrode.
19) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care should be taken
to keep from touching such power lines or circuits as contact with them might be fatal.
20) Unplug this LCD TV from the wall outlet, and refer servicing to qualified service personnel under the following conditions:
a.
When the power cord or plug is damaged or frayed.
b.
If liquid has been spilled into the LCD TV.
c.
If the LCD TV has been exposed to rain or water.
d.
If the LCD TV does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the LCD
TV to normal operation.
e.
If the LCD TV has been dropped or the cabinet has been damaged.
f.
When the LCD TV exhibits a distinct change in performance - this indicates a need for service.
21) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer
that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other
hazards.
22) WARNING
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE.
DO NOT PLACE LIQUID CONTAINERS (FLOWER VASES, CUPS, COSMETICS, ETC.) ABOVE THE SET.
(INCLUDING ON SHELVES ABOVE, ETC.)
23) WARNING
: SMALL PARTS CAN PRESENT CHOKING HAZARD IF ACCIDENTALLY SWALLOWED. KEEP SMALL
PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS
AND PLASTIC BAGS/SHEETS TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN,
CREATING THE POTENTIAL RISK OF SUFFOCATION.
24) CAUTION
: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS PLUG WITH A RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
25) CAUTION
: USE WITH OTHER STAND MAY RESULT IN INSTABILITY POSSIBLY CAUSING INJURY.
26) CAUTION
: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE.
NOTE : This equipment is designed to operate in North America and other countries where the broadcasting system and AC
house current are exactly the same as in North America.
Ŷ This product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. Disposal of
these materials may be regulated in your community due to environmental considerations. For disposal or recycling
information please contact your local authorities, or the Electronics Industries Alliance: www.eiae.org.
Federal Communication Commission Information
This equipment has been tested and found to comply with the limits for a TV Broadcast Receiver, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause or receive interference, which can be
determined by turning equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the TV antenna.
Increase the separation between TV and other equipment.
Connect TV into separate outlet from other equipment.
Consult the dealer or an experienced radio / TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
(NEC ART 250, PART H)
4
5
Accessories/Option
Connection
Ŷ Watching TV
Check you have all the items shown.
Back of the unit
Accessories
ƑRemote Control
Transmitter
•
ƑBatteries for the Remote
Control Transmitter (2)
•
EUR7613ZG0
ƑHDMI Cable
VHF/UHF aerial
Cable BOX
IN
AA Battery
OUT
or
Quick Start Guide
(for TC-26LE60 and TC-32LE60)
ƑOperating
ƑProduct Registration Card
Instructions
(U.S.A.)
ƑCustomer Care Plan Card
(U.S.A.)
Power Cord
(Connect after all the
other connections are
complete.)
or
Installing remote’s batteries
push
1
Caution
Incorrect installation may cause battery leakage and corrosion,
resulting in damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and
manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or break batteries.
Make a note of the remote control codes before changing
batteries in case the codes are reset. (p. 37-38)
•
••
•••
2
Connection
Accessories/Option
slide open
ANT
close
Note the correct
polarity (+ or -).
ANT IN
Optional accessory
Please contact your nearest Panasonic dealer
to purchase the recommended wall-hanging
bracket. For additional details, please refer to the
wall-hanging bracket installation manual.
•
•
Wall-hanging bracket
(vertical)
•
•
TY-WK32LR2W
ANT OUT
WARNING
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer
mount your unit will void your warranty.
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury
and product damage.
Do not mount this LCD Television directly below ceiling lights
(such as spotlights, floodlights or halogen lights) which typically
give off high heat. Doing so may warp or damage plastic cabinet
parts.
To record TV shows
Video
IN
L
Audio
OUT
R
Video
OUT
L
Audio
IN
R
Video recorder
with TV Tuner
DVD Recorder /
VCR
S Video signals have
priority.
S Video
OUT
How to remove the TV-Stand
1
Remove two screws
Pull out the plastic portion
Foam mat or thick soft cloth
6
2
Remove four screws
Pull out the metallic portion
••
•
•
•
Note
All cables and external equipment shown in this book are not supplied with the TV.
For additional assistance, visit us at: www.panasonic.com
www.panasonic.ca
When connecting video cables, priority is given to the S Video cable when both the S VIDEO input terminal and the
VIDEO input terminal are connected.
When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be
output through “OUTPUT” terminals.
Some programs contain a copyright protection signal to prevent VCR recording.
7
Receiver Location
Locate at a comfortable distance for viewing. Avoid placing where sunlight or other bright light (including reflections)
will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet.
Available only when “Auto power on” (p. 14-15) is set to “Off”.
How to use the LCD stand
Adjust the stand to your desired angle.
The stand angle can be rotated 20 ° to the right / left.
Select antenna and input modes
POWER button
Volume
Menu navigations
1
ANT In
Cable: Cable TV
Turn the TV On with the POWER
button
•
Note
The TV consumes some power as long as the power cord is inserted into the wall outlet.
2
Select your language
First time setup
Turns power On/Off
Selects Audio Mode for TV Viewing
Language
(used when the unit Power button is on)
(p. 10)
Auto program
Volume
Menu navigations
Selects channels in sequence
Menu navigations
Selects/OK/Change
Language
Language
RETURN (to previous menu)
Exit (from the menu)
English
Operates the Favorite channel list
function. (p. 11)
GUIDE for DBS
Displays or removes the channel banner
(p. 10)
Switches to previously viewed channel
and input mode.
Sleep timer (MINUTES) (p. 10)
next
Start scanning the channels
Español
Auto program
ANT In
Cable
Mode
All
Start scan
select
English
Direct channel access for DTV and
DBS (p. 10)
select
“Start
scan”
•
Now scanning analog channel ...
Progress
Sound mute On/Off
Numeric keypad to select
any channel or press to enter
alphanumeric input in menus. (p. 10)
start
Français
Press to go to previous screen.
Or, select icon, then press OK
for same results.
Displays Main Menu (p. 14-15)
Selects input mode (p. 12)
About broadcasting systems
Analog : traditional TV system
(NTSC)
Digital : new system that allows you to view
(ATSC) more channels featuring high-quality
video and sound
First Time Setup
Identifying Controls
Power indicator (on : red, off : no light)
Remote control sensor
Within about 23 feet (7 meters) in front of the TV set.
Sets the remote to communicate with
other equipment (p. 20)
Antenna: Antenna
Mode
All
: digital and analog
Analog : analog only (Reduces time for
scanning)
Selects channels
in sequence
Switches TV/VIDEO
select
Quick Start Guide
Identifying Controls
•
set
Auto program
Cable
ANT In
All
Mode
Start scan
Available channels
(analog/digital)
are automatically
set.
Confirm registered channels
3
Edit
Auto channel setup
Favorite
Select “Auto program”
First time setup
Language
Auto program
next
•
select
Apply
Add
---
No
2
Yes
select
“Apply”
ok
If OK is not pressed after selecting “Apply”,
the channels will not be memorized.
Ŷ Press to exit or return to previous screen
Changes aspect ratio (p. 11, 40)
External equipment operations
(p. 12, 36) (VCRs, DVDs, etc.)
•
8
Note
To change setting later, go to Menu screen (p. 14-15)
9
Watching TV
Connect cable Box when watching cable TV. (p. 7)
•
Change the aspect (p. 40)
For receiving digital broadcasting of cable TV, connect Cable TV directly to “ANT” terminal.
1
Switch to TV mode
3
Select a channel number
up
•
Change
aspect
ratio
Press button to cycle through the aspect modes.
• 480i, 480p:FULL/JUST/4:3/ZOOM
• 1080i, 720p:FULL/H-FILL/JUST/4:3
or
down
2
Ŷ To directly input the digital channel
Turn power on
number
When tuning digital channel,
press the button to enter the
minor number in a compound
channel number.
Ŷ Other Useful Functions (Operate after
)
Note
Reselect “Cable” or “Antenna” in “ANT In” of “Auto program” to switch the signal reception between cable TV and
antenna. (p. 19)
The channel number and volume level remain the same even after the TV is turned off.
Switches the unit OFF in a preset amount of time from 0 to 90 minutes in 30
minute intervals.
•
Sleep Timer
0/30/60/90 (minutes)
Channel numbers registered in Favorite are displayed on the favorite tune
screen. Select the desired broadcast station with the cursor, or using number
keys. (see below)
Set Favorite Feature
1 Display the channel to be placed on the Favorites list.
Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing Ż Ź
also changes the page.
Ŷ Selects Audio Mode for TV Viewing
Listen
with SAP
(Secondary
Audio
Program)
•
Digital mode
Press SAP to select the next audio track (if available) when receiving a digital channel.
Audio track 1 of 1
(English)
•
Setting 1/3
[1]
[2]
[3]
[4]
[5]
3
select
Setting 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Displays or removes the channel banner.
Press Ÿźto highlight a position
on the list.
Then, press OK to memorize the
displayed CH in that position.
• You can also use the NUMBER
keys (1-9 and 0) to select the
recorded list numbers (1-9 and
0). By doing so, the numbers
will be directly recorded without
having to press the OK key.
Press FAVORITE.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing Ż Ź
also changes the page.
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
2
ok
Analog mode
Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
1
3
select
ok
Watching TV
2
Use Favorite Feature
Viewing
•
•
example: CH15-1:
Ŷ FAVORITE
Call up
a favorite
channel
Press Ÿź or a Numbered key
(1-9 and 0) to highlight a channel
on the list.
• Selecting a channel number
from the list with the Number
keys will display the channel
directly.
Press OK to display the
highlighted channel.
Channel
Information
Recall
15-2
ABC - HD
Station
identifier
CC SAP
SAP
TV-G
Signal
resolution
Rating Level
10
1080I
Standard
Picture
mode
30
4:3
•
To delete a favorite channel
A memorized channel can be removed from the list by
holding down FAVORITE while it’s position is highlighted.
Sleep timer
remaining time
Aspect ratio
11
Watching Videos and DVDs
Input Labels/Closed Caption
Some Panasonic equipment connected to the TV unit can be operated with the remote control.
Programming the remote control is necessary to operate other manufacturers’ products. (p. 20, 36-38)
3
Setup
CH scan
Language
Switch to external input
Program channel
Press to display the Input select menu.
Other adjust
Menu
next
Audio
Timer
4
Set
Ŷ Press to exit
Setup
Press corresponding NUMBER
key on the Remote Control to
select the input of your choice.
The labels of equipment connected to external input terminals can be indicated for easy
recognition on the screen. (In selecting input mode of p. 12 )
Select the terminal and the label of the external equipment
or
select
[6] Video 3
enter
(Initial screen)
Press to select the input of your
choice, then press “OK”.
If during selection, no action
is taken for several seconds,
the Input selection menu is
exited.
•
Input labels
Display
labels of
external
equipment
select
Input labels
Comp.
SKIP
HDMI
Video 1
set
DVD
••
AUX
Video 2
SKIP
Video 3
SKIP
Terminal: Comp./HDMI/Video1-3
Label: SKIP*/VCR/DVD/CABLE/DBS/PVR/
GAME/AUX/[BLANK] Label
Terminal
* If “SKIP” is selected for a
Video 1
VCR
non-connected terminal,
its input is skipped when
switched with TV/VIDEO
button.
Viewing
Input select
[1] TV
[2] Component
[3] HDMI
[4] Video 1
[5] Video 2
select
Lock
Select the input mode
select
Input labels
CC
Select “Setup”
2
next
ALL
With VCR or DVD turned On
Picture
2
Select “Input labels” or “CC”
Input Labels/Closed Caption
Watching Videos and DVDs
1
Display menu
1
[example]
The terminal and label of the connected
equipment is indicated.
To label each of the connected equipment
(p. 13)
Label
Terminal
Video 1
VCR
Ŷ Select the item and set
[example]
Ŷ Press to return to TV
3
Operate
VCR
•
Off
Analog
CC1
Digital
Primary
DVD
Rewind/Fast Forward
Reverse/Forward
Play
Play
Pause
Pause
Stop
Stop
VCR Record
-
TV/VCR
Open/Close
Channel Down/UP
Slow Reverse/Forward
set
•
CC
Display
Closed
Caption
Select “On” (when not using, select “Off”).
(Choose the closed caption service of
Analog broadcasting.)
CC1-4:
Information related to pictures
(Appears at bottom of screen)
T1-4:
Textual information
(Appears over entire screen)
Digital
The settings in “Analog” or “Digital”
depend on the broadcaster.
(The Digital Closed Caption menu lets you
configure the way you choose to view the
digital captioning.)
Select the setting.
“Primary”, “Second.”, “Service 3”, “Service 4”,
“Service 5”, “Service 6”
•
Ŷ To make more in-depth display settings in digital programs
Select “Digital setting” and press “OK” button
Digital setting
select
Size
set
Automatic
Font
Automatic
Style
Automatic
(For other operations, see p. 36)
Analog
CC reset
(example)
Note
For details, see the
manual of the
equipment
or ask your local
dealer.
Mode
Digital setting
the VCR or DVD with the remote control
Mode
select
CC
Advanced
•
The television includes a built-in decoder that is capable of providing a text display of the
audio. The program being viewed must be transmitting Closed Captioning (CC) information.
(p. 40)
••
••
••
••
Select the item and set
Size: Text size
Font: Text font
Style: Text style (Raised, Depressed, etc.)
Foreground: Color of text
Fore opacity: Opacity of text
Background: Color of text box
Back opacity: Opacity of text box
Outline: Outline color of text
(Identify the setting options on the screen.)
(1/3)
Ŷ To reset the settings
Select “CC reset” and press “OK” button
12
13
How to Use Menu Functions
Ŷ Menu list
Various menus allow you to select settings for the picture, sound,
and other functions so that you can enjoy watching TV with your
preferences set.
1
Normal
Display menu
Pic. mode
Basic picture mode (Vivid/Standard/Cinema) (p. 41)
Pic. mode
Standard
•
Back light
Adjusts luminance of the back light.
Back light
+20
Picture, Brightness,
Color, Tint, Sharpness
Adjusts color, brightness, etc. for each picture mode to suit your
taste
Color temp
AI picture
Zoom adjust
Displays the functions that
can be set (varies according
to the input signal)
Select the menu
select
Video NR
Other adjust
next
Timer
Lock
Setup
select
(example: Picture menu)
Cool
AI picture
On
Adjusts vertical alignment and size when aspect setting is “ZOOM” (p. 40)
Zoom adjust
On
Reduces noise, commonly called snow. Leave off when receiving a strong signal. (On/Off)
Video NR
Off
3D Y/C filter
Off
Color matrix
SD
Minimizes noise and cross-color in the picture. (On/Off)
Not valid on component and HDMI.
Selects image resolution of component-connected devices (SD/HD)
SD: normal vision
HD: high-definition vision
Only 480 p signal accepted; regular TV (NTSC) is not available.
Select Dark or Light depending on the picture conditions. (Dark/Light)
The dark scene becomes easy to see. (Valid only for external input signals.)
Light
Set
Bass
Increase or decrease the bass response.
Bass
+4
Treble
Increase or decrease the treble response.
Treble
Balance
Emphasize the left / right speaker volume.
Balance
AI sound
Equalize overall volume levels across all channels and VIDEO inputs. (On/Off)
AI sound
Surround
Enhances audio response when listening to stereo. (On/Off)
Surround
HDMI in
Selects according to the signal when HDMI is connected (Auto/Digital/Analog)
Auto: Automatically selects Analog / Digital signal
HDMI in
Audio leveler
Minimizes volume disparity after switching to external inputs
Audio leveler
CH scan
Automatically turns off the TV after a pre-selected amount of time.
0/30/60/90 (minutes)
Timer setting is also possible by pressing the “Sleep” button on the remote control. (p. 10)
Locks the channels and programs (p. 16-17)
Selects channels to be displayed when pressing “Channel up/down” buttons. (Fav./All)
Fav.: Only channels registered as Favorite (p. 19)
Language
Selects the screen menu language (p. 9)
Language
Program channel
Sets receiving channels. (p. 18-19)
Program channel
Input labels
Displays labels of external equipment (p. 13)
Input labels
CC
Displays subtitles (Closed Caption) (p. 13)
CC
Sets how to power on the TV. (Set/Off)
Set : Connect power cord plug to Cable box etc. and control TV’s On/Off on the connected
equipment. (The Sleep Timer will not function if Auto power on is set.)
Off : Supply Power from wall outlet and control TV’s On/Off on TV side.
(“First time setup” menu is displayed when power cord plug is re-inserted after removing it
from the wall outlet.)
To prevent howling and image oscillation, stops output of the pictures and audio specified in this
menu. (p. 23) (Off/Comp./HDMI/Video 1/Video 2/Video 3)
Comp./HDMI cannot output video signals regardless of “Prog-out stop” setting.
Setup
Auto power on
Prog-out stop
0
0
On
Off
Auto
0
Sleep
60
CH scan
All
Auto power on
Off
Prog-out stop
Off
Ctrl with HDMI
Controls equipment connected to HDMI terminals. (p. 21, 22) (On/Off)
Ctrl with HDMI
Power save
Reduces screen brightness to lower power consumption. Eye-friendly for viewing in a dark room
(Standard/Saving)
Power save
About
Displays TV version and software license.
About
Reset
Performing Reset will clear all items set with Setup, such as channel settings. (p. 18) Use Reset with care.
Reset
•
14
Black level
Advanced
adjust
or
select
Color temp
Controls dark areas without affecting the black level or brightness in the overall picture (On/Off)
Other adjust
to previous screen
Set
Standard
+20
+20
0
0
0
0
Selects level of warm colors (red) and cool colors (blue) (Warm/Cool/Normal)
Normal
Picture 1/2
Normal
Pic. mode
Back light
Picture
Brightness
Color
Tint
Sharpness
0
0
Reset Bass, Treble and Balance adjustments to factory default settings.
Timer Sleep
Lock
Adjust or select
Tint
Sharpness
+20
0
0
Normal
Other adjust
Audio
Set
Standard
+20
+20
0
0
0
0
(example: Picture menu)
Ŷ Press to exit or return
Color matrix
Black level
Select the item
Picture 1/2
Normal
Pic. mode
Back light
Picture
Brightness
Color
Tint
Sharpness
3D Y/C filter
Picture
Brightness
Color
Set
How to Use Menu Functions
(picture, sound quality, etc.)
Menu
Audio
4
Adjustments/Configurations (alternatives)
Resets all picture adjustments to factory default settings except for “Other adjust”
Picture
3
Item
Normal
Picture
2
Menu
On
Standard
On
In VIDEO mode, the Audio menu and Setup menu give a smaller number of options.
15
Channel Lock
You can lock out specified channels or shows to prevent children from watching objectionable content.
1
Ŷ To select the channel or the rating of the program to be locked
Select up to 7 (1-7) channels to be blocked out. These channels will be blocked out regardless
of the program rating.
Select “CH” in
Display menu
Channel
Lock
Select “Channel”
Lock
Mode
Channel
Select channel to lock
Select “Lock”
select “CH1-7”
select
CH 3
select channel
Ŷ To set rating level
You will be asked to enter your password each time you display the Lock menu.
“V-chip” technology enables restricted shows to be locked according to TV ratings.
next
Menu
Channel lock
CH 1
3-0
CH 2
CH
Program
2
next
Select “Program”
Picture
Audio
Timer
Lock
Mode
select
Lock
Select the rating to be locked
next
CH
Channel
Program
Setup
select
select
3
Input your 4-digit password
Select the rating category you wish
to follow
A 4-digit code must be entered to view a blocked program or change rating
settings.
If it is the first time to enter the password,
Enter password.
enter the number twice in order to register it.
•
Lock
Mode
Channel
Program
Off
select
•
•
16
Note
When you select a
locked channel,
a message will be
displayed that allows
you to view the
channel if you input
your password.
••
••
R
Restricted: Under 17 requires accompanying
parent or adult guardian
X
•
No one 17 and under admitted
Adults only
To get other information (p. 39)
Select “Monitor out” in “Program lock” menu ( )
On :
MPAA
U.S.TV
C.E.L.R.
C.F.L.R.
Monitor out
Ŷ To change the password
Ŷ To cancel the “Channel lock”
Parents Strongly Cautioned: Inappropriate for
children under 13
NC-17
MPAA:U.S movie ratings
U.S.TV:U.S TV program ratings
C.E.L.R:Canadian English ratings
C.F.L.R:Canadian French ratings
Program lock
Off: “Channel lock” not activated
All: Locks all channels and external inputs
Game: Locks CH3, CH4, and external inputs
CH: Locks specified channels (analog/digital)
In , select “Change password” and press “OK” button
Input the new 4-digit password twice
On
Parental Guidance Suggested
PG-13
Ŷ To disable recording of the locked program
Change password
Caution
Make a note of your
password in case
you forget it. (If you
have forgotten your
password, consult your
local dealer.)
General Audience: All ages admitted
select
C.E.L.R.
••
••
Select the Lock mode
No rating
G
PG
MPAA
U.S.TV
C.F.L.R.
Monitor out
Off
•
Select “Off” in
••
Off :
Advanced
Ŷ Press to exit
4
set
Program lock
Block
program
- - - -
Example of “MPAA” (U.S movie ratings)
Channel Lock
Change password
Turns on the monitor terminal output for programs that have
been set to “Blocked.”
Turns off the monitor terminal output for programs that have
been set to “Blocked.”
Off
Caution
The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and
none) as per FCC Rules Section15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and
possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of
programming:”
• Emergency Bulletins (Such as EAS messages, weather warnings and others)
• Locally originated programming • News • Political • Public Service Announcements • Religious • Sports
• Weather
Note
The Off rating is independent of other ratings.
When placing a block on a specific age based rating level, the Off rating and any other more restrictive ratings will
also be blocked.
17
Editing and Setting Channels
The current channel settings can be changed according to your needs and reception conditions.
1
Automatically searches and adds active channels to memory.
Display menu
Select “ANT In”
Select “Mode”
Auto
Set
automaticallty
Menu
next
Picture
Audio
ANT In
Mode
Start scan
Lock
Edit
Add
---
No
next
select
select
Apply
---
Caption detail
next
Preset
Select the station identifier
Caption detail
Rename (maximum 7 characters available)
Favorite
Favorite
---
---
No
2
Yes
---
---
No
4
---
---
No
5
---
---
No
•
next
Favorite
Favorite
Favorite
Add
•
•
•
Caption:
Changes the station identifier
Favorite:
Registers channel to Favorites List
Add:
Adds or deletes channels
Apply
Favorite
Select the number
•
select
12
next
Add
Press “OK” button to select “Yes (add)” or “No
(delete)”
Advanced
Select the function
Add
3
Caption
select item to edit
(Caption/Favorite/Add)
Apply
Caption
1
Manual
Set
manually
Select “Apply”
next
Press to move cursor to “Apply”
ok
(to enter your
program)
select
Check the signal strength if interference is found or freezing occurs on a digital image.
Set
Ŷ To reset the settings of setup menu
Select “Reset” in Setup menu ( ) and press “OK” button
Input your 4-digit password with number buttons
Select “YES” on the confirmation screen and press “OK”
button
18
Edit
Caption
Caption select
Preset
select
Edit
Other adjust
5
•
CH
ALL
Program channel
Auto
Manual
Signal meter
After completing the setting,
select “Apply”. (see below ).
All previously memorized
channels are erased.
set/next
Program channel
Input labels
CC
4
•
•
select
Apply
Favorite
2
Ŷ Press to exit
All
Select the item to be edited
Language
Settings are made
automatically
All
set
Cable
Select “Program channel”
Setup
CH scan
Cable
Start scan
Select “Edit”
Setup
3
ANT In
Mode
Auto program
select
Auto program
Use this procedure when changing setting of receiving channels or changing the channel display.
Also, use to add or delete channels from channel list manually.
select
Timer
start
Select “Start scan”
Editing and Setting Channels
2
Select “Setup”
(Select Cable or Antenna)
Select All or Analog
All: Analog and digital
Analog: Analog only
Signal
meter
Check
signal
strength
Signal meter
2-1
CH
change channel
Signal strength
ok
Current
Peak level
•
85 %
85 %
Signal intensity
•
•
•
If the signal is weak, check the antenna.
If no problem is found, consult your
local dealer.
Note
Not available if “Cable” is selected in “ANT In”
(see above).
Effective only for digital antenna channels.
If “Channel lock” (p. 16) is activated and “Auto”, “Manual” or “Signal meter” is selected, “Enter password.” will be displayed.
19
Operating Peripheral Equipment
Control with HDMI “HDAVI ControlTM”
You can operate other manufacturers’ equipment using this TV’s remote control.
Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV’s
remote. Limited features such as automatic switching to the TV’s HDMI input are available.
1
Connect the external equipment to the TV and
Power Off the external equipment
2
+
Press both buttons simultaneously
for more than 3 seconds.
3
Release the buttons when the equipment selection
buttons start flashing.
Automatic
input
switching
When “Ctrl with HDMI” is set to “On”, at the start of HDAVI control compatible equipment’s playback,
the TV’s input automatically switches to the input corresponding to the playback equipment.
If using DIGA operation and the DIGA menu is displayed, the TV input automatically
switches to DIGA. If TV power is Off, it switches On.
Power on
link
When “Ctrl with HDMI” is set to “On”, the TV is automatically turned on and switched to the
appropriate HDMI input whenever HDAVI control compatible equipment is initially turned on
and Play mode is selected.
Power off
link
When “Ctrl with HDMI” is set to “On” and the TV is turned off, the connected HDAVI control
compatible equipment is also automatically turned off.
DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Select the equipment
•
with the equipment selection button
•
The selected button remains lit (other buttons are not
lit).
4
Input the equipment’s 4-digit remote
control code (p. 37-38)
5
Operate the equipment with the
remote control (p. 36)
•
The external equipment turns On.
Ŷ If the equipment does not operate with
remote control
When your equipment has a single code
Input the remote control code again
When your equipment has multiple codes
Change the code with above and test again
Caution
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
•
•
••
•
Caution
The TV remains on even if the “Control with HDMI” compatible equipment is turned off.
Note
Before using HDMI control functions, the connected equipment must also be set. For details, see the operation
manual for each equipment.
For equipment connection details, see p. 22.
Default setting is “On”. If no HDMI equipment is connected or standard HDMI equipment (non- “Control with
HDMI”) is used, set to “Off”. (see below)
1
Display menu
3
Select “Other adjust”
Setup
CH scan
select
ALL
Advanced
•
•
•
This feature is limited to models incorporating Panasonic’s “Control with HDMI”. Refer to the individual instruction
manuals for compatibility information.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable.
Recommended part number: RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
RP-CDHG50 (5.0 m)
Control with HDMI “HDAVI ControlTM”
Operating Peripheral Equipment
•
•
••
Language
Program channel
Input labels
CC
To find a code not listed in the code list
next
Other adjust
This procedure searches all codes and is called the “sequence method.”
After step
test
above, change the code and
When the correct code is found
store
2
Select “Setup”
Menu
Picture
4
Audio
change
Timer
Lock
Setup
Operate the equipment with the
remote control (p. 36)
••
20
Repeat until the code is found
It may take many attempts before the correct
code is found
select
5
Select “Ctrl with HDMI”
Other adjust
Auto power on
Prog-out stop
Ctrl with HDMI
Power save
select
Off
Off
On
Standard
Select “On” or “Off”
change
next
Ŷ Press to exit or return to previous screen
21
Recommended AV Connections
These diagrams show our recommendations for how to connect the TV unit to your various equipment.
For other connections, consult the instructions of each equipment and the specifications (p. 45).
For additional assistance, please visit our website at: www.panasonic.com
www.panasonic.ca
Power Cord
(Connect after all the other
connections are complete.)
Digital Audio Out
ANT
AV
IN
SERVICE ONLY
DIGITAL AUDIO OUT
Ŷ To watch DVDs
Ŷ To watch camcorder
DVD Player
Set Top Box
images
Camcorder
VCR
DVD Player
Optical digital
audio cable
HDMI-DVI
conversion cable
M3 plug
Ŷ To listen to the TV through
speakers
Audio
cable
Cable TV
Advanced
HDMI cable
or
Recommended AV Connections
Back of the unit
OPTICAL IN
or
Amplifier
Headphones/
Earphones
(not supplied)
Cable Box
Ŷ Control with HDMI
Ŷ To watch digital
video image
DVD Player or
Set Top Box
(HDMI compatible
machine only)
(p. 21)
Connect with HDMI cable
or
DIGA
(Panasonic DVD Recorder)
Ŷ DVD Recorder / VCR
•
22
Note
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their
respective operating instruction manuals.
•
•
•
•
•
Note
Set the TV channel to CH3 or CH4 for using Cable Box
Connection.
For further information on Cable Box Connection, consult to
your local cable company.
The picture and audio input signals connected to a terminal
specified in “Prog-out stop” (p. 14-15) cannot be output from
“OUTPUT” terminals.
However, audio output can be obtained from “Digital Audio
Out” terminal.
To prevent howling and image oscillation, set the “Prog-out-stop”
setting when connecting VCR with loop-connection. (p. 14)
When equipment (STB, DVD, etc.) is connected to HDMI
or COMPONENT terminals, only audio signals can be
obtained. No video signals can be out put.
23
Accesorios/Opción
Conexiones
Ŷ Para ver la televisión
Compruebe que ha recibido todos los elementos que se indican.
Parte posterior de la unidad
Accesorios
ƑTransmisor de
mando a distancia
•
ƑPilas para el transmisor
de mando a distancia (2)
•
EUR7613ZG0
ƑCable HDMI
Antena de VHF / UHF
Receptor de televisión
por cable
IN
Pila AA
OUT
ó
(para TC-26LE60 y TC-32LE60)
ƑManual de
ƑTarjeta del cliente
instrucciones
(para EE. UU.)
ƑTarjeta para el plan de asistencia
al cliente (para EE. UU.)
Cable de alimentación de
CA (Conecte después de
haber terminado todas las
demás conexiones.)
ó
Instalación de las pilas del mando a distancia
Empuje
1
Precaución
La instalación mal hecha puede causar fugas de electrolito y
corrosión, lo que podría dañar el mando a distancia.
No mezcle pilas viejas y nuevas.
No mezcle pilas de tipos diferentes (pilas alcalinas y de
manganeso, por ejemplo).
No utilice baterías (Ni-Cd).
No queme ni rompa las pilas.
Anote los códigos de mando a distancia antes de cambiar las
pilas en el caso de que tenga que restablecer los códigos.
(págs. 37-38)
•
••
•••
Deslice para abrir
2
ANT
ANT IN
Accesorio opcional
Póngase en contacto con su concesionario
Panasonic más cercano para adquirir la ménsula
de montaje en pared recomendada. Para conocer
más detalles, consulte el manual de instalación
de la ménsula de montaje en pared.
Para reproducir vídeo
•
Video
IN
TY-WK32LR2W
Video
OUT
•
L
Audio
IN
R
Las señales de S Vídeo
tienen prioridad.
S Video
OUT
Cómo retirar la base del televisor
1
Retire dos tornillos.
Saque la parte de plástico.
Estera de espuma ó paño
blando y grueso
24
2
Videograbadora con
sintonizador de TV
Grabadora DVD /
Videograbadora
Español
[Resumen]
L
Audio
OUT
R
•
Soporte para colgar
en pared (vertical)
•
ANT OUT
ADVERTENCIA
No utilizar una ménsula de Panasonic ó montar la unidad usted
mismo puede ser la causa de que el consumidor corra riesgos.
Cualquier daño que resulte de no haber sido un instalador
profesional quien montó su unidad anulará su garantía.
Asegúrese de pedir siempre a un técnico calificado que lleve a
cabo la instalación. Una instalación incorrecta podría ser la causa
de que el equipo cayera, causando lesiones a personas y daños
en el producto.
No monte el televisor LCD directamente debajo de las luces
del techo (luces direccionales, reflectores ó luces halógenas)
que producen típicamente mucho calor. De lo contrario podrían
deformarse ó dañarse las piezas de plástico de la caja.
Conexiones
Accesorios/Opción
Cierre
Ponga las polaridades (+ ó -)
en las posiciones correctas
Retire cuatro tornillos.
Saque la parte metálica.
••
•
•
•
Notas
Con este televisor no se suministran todos los cables ni equipos externos mostrados en este manual.
Para obtener más ayuda, visítenos en www.panasonic.com
Al conectar cables de vídeo se da prioridad al cable de S vídeo cuando están conectados el terminal de entrada
S VIDEO y el terminal de entrada VIDEO.
Cuando reciba señales de canales digitales, todos los formatos digitales serán convertidos en sentido
descendente en vídeo NTSC compuesto que saldrá a través de los terminales de salida de programas.
Algunos programas contienen una señal de protección de derechos de autor para impedir la grabación con una
videograbadora.
25
Colocación del receptor
Coloque el receptor a una distancia confortable para ver. Evite colocarlo donde la luz solar directa u otra luz brillante
(incluidos reflejos) caiga sobre la pantalla.
La utilización de algún tipo de iluminación fluorescente puede reducir el alcance del transmisor del mando a distancia.
La ventilación adecuada es esencial para impedir el fallo de los componentes internos. Manténgase alejado de las
áreas donde el calor o la humedad sea excesivo.
Ajuste inicial
“Ajuste inicial” sólo se visualiza cuando el televisor se enciende por primera vez después de conectar el
cable de alimentación de CA en una toma de corriente.
Sólo disponible cuando “Autoencendido” (págs. 30-31) está en “Sí”.
Cómo utilizar la base del LCD
Ajuste el soporte con el ángulo deseado
El ángulo del soporte se puede girar 20° hacia la derecha/izquierda.
Seleccione la antena y los modos de entrada
Establezca
Programa auto
Ent. ANT
Modo
Identificación de los controles
El botón POWER
Volúmen
Cambia TV/VIDEO
Navegaciones del
menú
Selecciona canales en orden.
1
Modo
Todos : Digital y analógico
Análogo: Analógico solamente (Reduce el
tiempo para la recepción)
•
(Se utiliza cuando está activado el botón de la
alimentación.)
Configura el mando a distancia para
hacer la comunicación con otros
dispositivos.
Volúmen
Navegaciones del menú
Selecciona canales en orden.
Navegaciones del menú
2
Seleccione el modo de audio para
ver la televisión. (pág. 28)
Seleccione su idioma.
Ajuste inicial
Idioma
Selección/OK/Cambio
Idioma
Idioma
RETURN (para volver al menú anterior)
Salir (del menú)
English
Controla la función de la lista de
canales favoritos. (pág. 29)
GUÍA para DBS
(pág. 28)
Cambia al canal visto previamente.
Temporizador para acostarse
(MINUTOS) (pág. 28)
Acceso directo a canales para DTV
y DBS (pág. 28)
Seleccione
Español
Español
Français
Configuración automática de canales
Seleccione “Programa auto”.
Idioma
Programa auto
•
Siguiente
Seleccione
Los canales disponibles
(analógicos/digitales)
se establecen
automáticamente.
Confirme los canales registrados.
Editar
Ajuste inicial
Seleccione
“Iniciar
escaneo”.
•
Escaneando canales análogos ...
Pulse para ir a la pantalla anterior
ó seleccionar un icono, y luego
pulse OK para obtener el mismo
resultado.
3
Inicie.
Iniciar escaneo
Progreso
Encendido / Apagado del
silenciamiento del sonido
Teclado numérico para seleccionar
cualquier canal ó para hacer
introducciones alfanuméricas en los
menús. (pág. 28)
Programa auto
Ent. ANT
Cable
Modo
Todos
Aceptar
Favoritos
Agregar
---
No
2
Si
Seleccione
“Aceptar”.
Aceptar
Español
[Resumen]
Visualiza ó elimina la bandera de canal.
Inicie la exploración de los canales.
Programa auto
Visualiza el menú principal. (págs. 30-31)
Selecciona el modo de entrada. (pág. 32)
Siguiente
Acerca de los sistemas de emisión
Analógico : Sistema de televisión tradicional
(NTSC)
Digital
: Un sistema nuevo que le permite
(ATSC)
ver más canales con imagen y
sonido de alta calidad.
Ajuste inicial
Identificación de los controles
Conecta/desconecta la alimentación.
Seleccione
Ent. ANT
Cable: Televisión por cable Antena: Antena
Encienda el televisor con el
interruptor POWER.
Sensor del control remoto
Dentro de unos 7 metros enfrente del televisor.
•
Todos
Iniciar escaneo
Indicador de alimentación (conectada: rojo, desconectada: apagado)
Nota
El televisor consumirá algo de corriente siempre que el enchufe del cable de alimentación esté introducido en la
toma de corriente.
Cable
Para poner en la memoria los canales que
fueron localizados mediante la exploración
automática, mueva el cursor a “Aceptar” y
pulse OK.
Ŷ Pulse para salir ó volver a la pantalla anterior.
Operaciones de equipos externos
Cambia la relación de aspecto
(pág. 32) (Videograbadoras, DVDs, etc.)
(pág. 29)
•
26
Nota
Para cambiar la configuración posteriormente, vaya a
la pantalla Menu (págs. 30-31)
27
Para ver la televisión
Conecte el receptor de televisión por cable cuando vaya a ver televisión por cable. (pág. 25)
Conecte directamente el televisor por cable a la terminal “ANT” para recibir emisiones digitales de televisión por cable.
1
Cambie al modo de
televisión.
3
Seleccione un número de
canal.
Cambie la relación de aspecto
•
Cambio de
la relación
de aspecto
El modo cambia con cada pulsación.
• 480i, 480p:COMP/JUSTO/4:3/ACERC
• 1080i, 720p:COMP/H-LLENO/JUSTO/4:3
Arriba
ó
Abajo
2
Ŷ Otras funciones útiles (Utilícelas después de
número de un canal digital
Cuando se sintonicen canales
digitales, presione el botón
para introducir el número
menor en un número de canal
complejo.
Ejemplo: CH15-1:
)
•
•
Apaga la unidad después de pasar un periodo de tiempo de 0 a 90 minutos que
puede ajustarse a intervalos de 30 minutos.
•
Configuración de la función de favoritos
1 Visualice el canal que va a colocar en la lista de favoritos.
0/30/60/90 (minutos)
Pista de audio 1 de 1
(Ingles)
•
Ajustes 1/3
[1]
[2]
[3]
[4]
[5]
3
Modo analógico
Pulse SAP para seleccionar el modo de audio como se describe a continuación.
• Cada vez que se pulsa el botón SAP, el modo de audio cambiará como se muestra a continuación.
(Estereo/SPA/Mono)
Ajustes 1/3
[1] 26-1
[2]
[3]
[4]
[5]
Visualice ó elimine la bandera de canales.
Recuperación
de
información
Canal
15-2
ABC - HD
Identificador
de emisora
•
CC SPA
SPA
TV-G
1080I
Resolución
de señales
Nivel de clasificación
28
Estándar
Modo de
imagen
30
4:3
1
Favoritos 1/3
[1]
[2]
[3]
[4]
[5]
2
Seleccione Pulse Ÿź para resaltar una
posición en la lista. Y luego pulse
OK para memorizar el canal
visualizado en esa posición.
Aceptar
• También puede utilizar las
teclas numéricas (1-9 y 0) para
seleccionar los números de lista
grabados (1-9 y 0). Al hacer
esto, los números se grabarán
directamente sin tener que
pulsar la tecla OK.
Pulse FAVORITE.
• Pulse repetidamente FAVORITE
para cambiar entre las páginas
(1/3, 2/3, 3/3 ó salir). Al pulsar
Ż Ź también cambia la página.
3
Seleccione Pulse Ÿź ó una tecla numerada
(1-9 y 0 ) para resaltar un canal
de la lista.
• Al seleccionar un número de
canal de la lista con las teclas
numeradas se visualizará
directamente el canal.
Aceptar
Español
[Resumen]
Modo digital
Pulse SAP para seleccionar la siguiente pista de audio (si está disponible) cuando se recibe
un canal digital.
Utilización de la función de favoritos
Mantenga pulsado FAVORITE
durante varios segundos.
• Pulse repetidamente FAVORITE
para cambiar entre las páginas
(1/3, 2/3, 3/3 ó salir). Al pulsar
Ż Ź también cambia la página.
Ŷ Seleccione el modo de audio para ver la televisión.
•
Los números de canales de Favoritos se visualizan en la pantalla de
sintonización de favoritos. Seleccione la emisora deseada con el cursor ó
usando las teclas de números. (vea debajo)
Nota
Vuelva a seleccionar “Cable” ó “Antena” en “ANT In” de “Programa auto” para cambiar la recepción de la señal
entre televisión por cable y antena.
El número del canal y el nivel del volúmen se fijan incluso después de apagar el televisor.
2
Escucha
con SAP
(Programa
de audio
secundario)
Ŷ FAVORITOS
Llamada
a un canal
favorito
Para ver la televisión
Temporizador
para
acostarse
Ŷ Para introducir directamente el
Conecte la
alimentación
Pulse OK para visualizar el canal
resaltado.
Para eliminar un canal favorito
Un canal memorizado se podrá eliminar de la lista
manteniendo pulsado FAVORITE mientras su posición está
resaltada.
Tiempo restante del
temporizador para acostarse
Relación de aspecto
29
Cómo utilizar las funciones de los menús
Varios menús le permiten seleccionar configuraciones para la imagen,
el sonido y otras funciones, para poder disfrutar viendo la televisión
con sus preferencias establecidas.
1
Menú
Visualice el menú
•
Visualiza las funciones que
pueden establecerse (cambia
según la señal de entrada).
Seleccione el menú
Seleccione
Menú
Imagen
2
Ŷ Lista de menús
Ajuste
Seleccione
Audio
Sí
Estándar
+20
+20
0
0
0
0
(Ejemplo: Menú Picture)
a la pantalla anterior.
Ajuste
ó
Seleccione
(Ejemplo: Menú Picture)
Ajuste
30
Ajusta el color, el brillo, etc. para que cada modo de imagen se
ajuste a sus gustos.
Temp color
Selecciona el nivel de los colores cálidos (rojo) y de los colores fríos (azul). (Rojo/Azul/Normal)
Temp color
Imagen IA
Controla las áreas oscuras sin afectar al nivel del negro ni al brillo de la imagen en general. (Sí/No)
Imagen IA
Ajuste acerc.
Ajusta la alineación vertical y el tamaño cuando el ajuste del aspecto es “ACERC”
Ajuste acerc.
On
Reduce el ruido en el canal, comúnmente llamado efecto de nieve. Permanece en No cuando se recibe una señal intensa. (Sí/No)
Reduc de ruido
No
3D Y/C filtro
No
Matriz color
SD
3D Y/C filtro
Matriz color
Nivel obscuro
Luz de atrás
Contraste
Brillo
Color
+20
0
0
Minimiza el ruido y la diafotía cromática en la imagen. (Sí/No)
No es válido en componente y HDMI.
Selecciona la resolución de la imagen de los dispositivos conectados a componentes. (SD/HD)
SD: Visión normal
HD: Visión de alta definición
Sólo se acepta la señal 480 p, la televisión convencional (NTSC) no se está disponible.
Selecciona Oscuro ó Claro dependiendo de las condiciones de la imagen. (Obscuro/Claro)
Las escenas oscuras se pueden ver fácilmente. (Sólo es válido para señales de entrada externas.)
Tinte
Nitidez
Nivel obscuro
Sí
Estándar
+20
0
0
Azul
Sí
Claro
Normal
Repone los ajustes de Bajos, Altos y Balance los ajustes predeterminados en la fábrica.
Normal
Bajos
Aumenta ó disminuye la respuesta de los graves.
Bajos
+4
Altos
Aumenta ó disminuye la respuesta de los agudos.
Altos
0
Balance
Repone los ajustes de Bajos, Altos y Balance los ajustes predeterminados en la fábrica.
Balance
Sonido IA
Iguale los niveles del sonido en todos los canales y entradas VIDEO. (Sí/No)
Sonido IA
Envolvente
Mejora la respuesta de audio cuando se escucha sonido estéreo. (Sí/No)
Envolvente
Ent. HDMI
Selecciona según la señal cuando está conectado HDMI. (Auto/Digital/Análogo)
Auto: Selecciona automáticamente la señal analógica/digital.
Ent. HDMI
Norm. de audio
Minimiza la diferencia de volúmen después de cambiar a entradas externas.
Norm. de audio
Búsqueda
Apaga automáticamente el televisor después de transcurrido el periodo de tiempo preestablecido. 0/30/60/90 (minutos)
También es posible hacer el ajuste del temporizador pulsando el botón “Sleep” del mando a distancia. (pág. 28)
Bloquea canales y programas.
Selecciona los canales que van a visualizarse cuando se pulsan los botones “canal arriba/abajo”. (Fav./Todos)
Fav.: Sólo cuando se registran canales como Favoritos
Idioma
Selecciona el idioma para los menús de la pantalla. (pág. 27)
Idioma
Programa canal
Establece los canales de recepción.
Programa canal
Títulos de entradas
Etiquetas de visualización de dispositivos externos
Títulos de entradas
CC
Visualiza subtítulos (subtítulos)
CC
Establece cómo se va a conectar la alimentación del televisor. (Sí/No)
Sí : Conecte la clavija del cable de alimentación al receptor de televisión por cable, etc., y
controle el encendido/apagado del televisor en el equipo conectado. (El temporizador para
acostarse no funcionará si está activado “Autoencendido”.)
No : Suministre alimentación desde una toma de corriente y controle el encendido/apagado del
televisor en el propio televisor.
(El menú “Ajuste inicial” se visualiza cuando la clavija del cable de alimentación vuelve a
conectarse después de desconectarla de la toma de corriente.)
Para impedir el aullido y la oscilación de la imagen, detenga la salida de la imagen y el sonido
especificados en este menú (pág. 35). (No/Comp./HDMI/Video 1/Video 2/Video 3)
Comp./HDMI 1/HDMI 2 no puede dar salida a señales de vídeo independientemente del ajuste de “Para prog-out”.
Autoencendido
Para prog-out
Apagado
Búsqueda
Sí
0
Sí
No
Auto
0
60
Todos
Español
[Resumen]
ŶPulse para salir ó volver
Sí
Estándar
+20
+20
0
0
0
0
Ajusta la luminancia de la luz de fondo.
Contraste, Brillo,
Color, Tinte, Nitidez
Cronómetro Apagado
Bloqueo
Ajuste ó seleccione
Imagen 1/2
Normal
Modo
Luz de atrás
Contraste
Brillo
Color
Tinte
Nitidez
Luz de atrás
Otros ajustes
4
Modo
Otros ajustes
Seleccione el elemento
Imagen 1/2
Normal
Modo
Luz de atrás
Contraste
Brillo
Color
Tinte
Nitidez
Modo de imagen básico (Vívido/Estándar/Cinema)
Autoencendido
No
Para prog-out
No
Ctrl con HDMI
Controla los equipos conectados a los terminales HDMI (pág. 33, 34) (Sí/No)
Ctrl con HDMI
Sí
Econ. energía
Reduce el brillo de la pantalla para disminuir el consumo de energía. Para ver programas en
habitaciones oscuras sin que se canse la vista. (Estándar/Ahorro)
Econ. energía
Estándar
Acerca de
Visualiza la versión del televisor y la licencia del software.
Acerca de
Restaurar
Al realizar la reposición se cancelarán todos los elementos establecidos con Ajuste como, por
ejemplo, los ajustes de canales. Utilice la reposición con cuidado.
Restaurar
•
En el modo Video, el menú Audio y el menú Ajuste ofrecen un número inferior de opciones.
Cómo utilizar las funciones de los menús
Bloqueo
3
Normal
Modo
Otros ajustes
Siguiente
Cronόmetro
Ajustes / Configuraciones (alternativas)
Restablece la configuración del menú de imagen (excepto para “Otros ajustes”).
Reduc de ruido
Imagen
Audio
Elemento
Normal
On
31
Para ver vídeos y DVDs
Control con HDMI “HDAVI ControlTM”
Algunos dispositivos de Panasonic conectados al televisor pueden ser controlados con el mando a
distancia.
Para controlar los productos de otros fabricantes se necesita programar el mando a distancia.
Los productos de audio-vídeo de Panasonic más recientes equipados con conexiones de salida HDMI
pueden ser controlados utilizando el mando a distancia del televisor. Se encuentran disponibles funciones
limitadas como, por ejemplo, el cambio automático a la entrada HDMI del televisor.
1
Con la videograbadora ó DVD encendido
2
Seleccione el modo de entrada.
•
••
Cambie a entrada externa.
Pulse para visualizar el menú de selección de entrada.
Pulse la tecla de número
correspondiente en el mando
a distancia para seleccionar la
entrada de su elección.
ó
[4] Video 1
[5] Video 2
Seleccione.
[6] Video 3
Introducir.
(Pantalla inicial)
•
Pulse para seleccionar la
entrada de su elección y luego
pulse “OK”.
Si, durante la selección, no
se realiza ninguna acción
durante varios segundos, se
saldrá del menú de selección
de entrada.
•
El terminal y la etiqueta del dispositivo
conectado se indican.
Para etiquetar cada uno de los dispositivos
conectados (pág. 13)
Etiqueta
Terminal
Video 1
VCR
[ejemplo]
Ŷ Para volver
al televisor
3
Cambio
de entrada
automático
Cuando “Ctrl con HDMI” se ponga en “Sí”, al empezar la reproducción del equipo compatible
con el control HDAVI, la entrada del televisor cambiará automáticamente a la entrada
correspondiente al equipo de reproducción.
Si se utiliza la operación DIGA, la entrada del televisor cambia automáticamente a DIGA y se visualiza
el menú DIGA. Si la alimentación del TV está desconectada, ésta se conecta automáticamente.
Prende
control
Cuando “Ctrl con HDMI” se ponga en “Sí”, el televisor se encenderá automáticamente y
cambiará a la entrada HDMI apropiada siempre que el equipo compatible con el control
HDAVI se encuentre inicialmente encendido y el modo de reproducción esté seleccionado.
Apaga
control
Cuando “Ctrl con HDMI” se ponga en “Sí” y se apague el televisor, el equipo compatible con
el control HDAVI conectado también se apagará automáticamente.
DIGA (grabadora DVD de Panasonic) no se apagará si aún está en el modo de grabación.
•
•
••
•
•
Precaución
El televisor permanecerá encendido aunque se apague el equipo compatible con “ Control con HDMI”.
Nota
Antes de utilizar las funciones de control HDMI, el equipo conectado deberá configurarse. Para conocer detalles,
vea el manual de funcionamiento de cada equipo.
Para conocer detalles de la conexión del equipo, vea la pág. 34.
El ajuste predeterminado es “Sí”. Si no están conectados equipos HDMI ó se utilizan equipos HDMI estándar (que
no sean “Control con HDMI”), ajuste en “No”. (vea debajo)
1
Utilice
Visualice el menú.
3
•
32
Nota
Para conocer detalles,
vea el manual del
equipo ó pregunte a su
concesionario local.
Programa canal
Títulos de entradas
DVD
Retroceso/Avance rápido
Retroceso/Avance
Reproducción
Reproducción
Pausa
Pausa
Parada
Parada
Grabación de
videograbadora
-
Seleccione
Todos
Idioma
(ejemplo)
Videograbadora
Ajuste
Búsqueda
Siguiente
CC
Otros ajustes
2
Seleccione “Ajuste”.
Menú
Imagen
4
Audio
Cronόmetro
Seleccione “Ctrl con HDMI”.
Otros ajustes
Autoencendido
Para prog-out
Ctrl con HDMI
Econ. energía
Seleccione.
Español
[Resumen]
la videograbadora ó DVD con el mando a distancia
Seleccione “Otros ajustes”.
Control con HDMI “HDAVI ControlTM”
Para ver vídeos y DVDs
Seleccionar entrada
[1] TV
[2] Componente
[3] HDMI
Esta función se limita a los modelos que incorporan “Control con HDMI” de Panasonic.
Consulte los manuales de instrucciones individuales para obtener información relacionada con la compatibilidad.
No se pueden utilizar cables que no cumplan con HDMI.
Se recomienda utilizar un cable HDMI de Panasonic.
Número de pieza recomendada: RP-CDHG15 (1,5 m)
RP-CDHG30 (3,0 m)
RP-CDHG50 (5,0 m)
No
No
Sí
Estándar
Bloqueo
Ajuste
Televisor/Videograbadora Abertura/Cierre
Seleccione
Canal abajo/arriba
Siguiente
Retroceso/avance lento
5
Seleccione “Sí” ó “No”.
Cambie
ŶPulse para salir ó volver a la pantalla anterior.
33
Conexiones AV recomendadas
Estos diagramas muestran nuestras recomendaciones sobre cómo conectar el televisor a varios equipos.
Para hacer otras conexiones, consulte las instrucciones de cada equipo y las especificaciones (pág. 45).
Para obtener ayuda adicional, visite nuestro sitio Web www.panasonic.com.
Cable de alimentación de CA (Conecte
después de haber terminado todas las
demás conexiones.)
Parte posterior de la
unidad
Salida de audio digital
SERVICE ONLY
IN
DIGITAL AUDIO OUT
Ŷ Para ver DVDs
Ŷ Para ver imágenes de
Reproductor DVD
Receptor digital
multimedia
cámara de vídeo
Cámara de vídeo
Videograbadora
Reproductor DVD
Cable óptica
digital de audio
Cable HDMI
Ŷ Para escuchar la
ó
televisión por altavoces
Cable de
conversión
HDMI-DVI
Clavija M3
OPTICAL IN
Cable TV
Amplificador
ó
Los cascos auriculares/
auriculares (no suministrados)
Cable Box
Ŷ Para ver imágenes
de vídeo digital
Reproductor DVD
ó receptor digital
multimedia (Máquinas
compatibles con HDMI
solamente)
Ŷ Control con HDMI
(pág. 33)
Conecte con cable HDMI
DIGA
(Grabadora DVD de Panasonic)
ó
Ŷ Grabadora DVD /
•
34
Notas
Los equipos HDMI individuales tal vez requieran configuraciones de menús específicas adicionales para cada
modelo. Consulte sus manuales de instrucciones respectivos.
Videograbadora
•
•
•
•
•
Notas
Ponga el canal de televisión en CH3 ó CH4 para utilizar la
conexión del receptor de televisión por cable.
Para tener más información acerca de la conexión del
receptor de televisión por cable, consulte a su compañía de
televisión por cable local.
Las señales de entrada de vídeo y audio conectadas a un
terminal especificado en “Para-prog-out” (págs. 30-31) no
pueden salir por los terminales “OUTPUT”.
Sin embargo, sí se obtendrá salida de audio por el terminal
“Digital Audio Out”.
Para impedir el aullido y la oscilación de la imagen,
establezca la configuración “Para prog-out” cuando conecte la
videograbadora mediante una conexión en bucle. (pág. 30)
Cuando se conecte un equipo (STB, DVD, etc.) a los
terminales HDMI ó COMPONENT sólo se podrán obtener
señales de audio. No se pueden reproducir señales de vídeo.
Español
[Resumen]
Cable
de audio
Conexiones AV recomendadas
ANT
AV
35
Remote Control Operation/Code List
The following explains how to operate external equipment with the remote control.
Register the remote control codes (p. 20) if you want to operate an external equipment of another manufacturer. (p. 37-38)
•
•
Ŷ Remote Control Operation List
This chart defines which keys are operational after programming (if needed),
while in the selected remote control mode, DTV, CABLE, DBS, VCR, DVD.
DBS/CBL MODE
VCR MODE
(DBS)
DVD MODE
(CBL)
Cable Converter (
Brand
ABC
Americast
Bell South
Digeo
Director
General Instrument
GoldStar
Note
Operation may not be possible depending on the available memory size of the remote control.
This remote control is not designed to cover operation of all functions of all models.
KEY NAME
Ŷ Remote Control Code List
Power
Power
Power
Power
-
CH Up, Cursor Up
CH Up, Cursor Up
Skip Up
-
CH Down, Cursor Down
CH Down, Cursor Down
Skip Down
Vol Down
DBS Cursor Left
CBL Cursor Left
Vol Down
Vol Up
DBS Cursor Right
CBL Cursor Right
Vol Up
-
DBS Menu
CBL Menu
-
-
Exit
Exit
-
TV Input Switch
TV Input Switch
TV Input Switch
TV Input Switch
)
Code
0003, 0008
0899
0899
1187
0476
0003, 0276, 0476, 0810
0144
Satellite Receiver (
0772
0216
1109
0099, 0247, 0392, 0566,
0639, 0724, 0749, 0819,
1076, 1108, 1109, 1142,
DirecTV
1377, 1392, 1414, 1442,
1443, 1444, 1609, 1639,
1640, 1749, 1856
Dish Network 0775, 1005, 1170,
System
1505, 1775
Dishpro
0775, 1005, 1505, 1775
Echostar
0775, 1005, 1170, 1505, 1775
Expressvu
0775, 1775
GE
0392, 0566
Recall
Onscreen Display
TV Mute
TV Mute
TV Mute
TV Mute
DBS/PVR Combination (
0099, 0392, 0639, 1076,
1142, 1377, 1392, 1442,
1443, 1444, 1640
Dish Network 0775, 1505
System
-
-
-
0-9
0-9
-
Rewind
-
-
Reverse
Play
-
-
Play
Fast Forward
-
-
Forward
Pause
-
-
Pause
Stop
-
-
Stop
VCR Record
-
PVR Record *1
-
TV/VCR
Aspect
Aspect
Open/Close
Channel Down
Page Down
Page Down
Slow Reverse
Channel Up
Page Up
Page Up
Slow Forward
*1: Combination type
36
Code
0317, 1305
0144, 0533, 0877, 1877
0000
0000
0273, 0279
0000
0144
Code
0008, 0477, 0877, 1877
1006
0003
0276
0003
0000
0000, 0525, 0899
Samsung
Sanyo
Sony
Star Choice
Tivo
Toshiba
UltimateTV
Uniden
US Digital
USDTV
Voom
Zenith
1108, 1109, 1142, 1276,
1377, 1442, 1609
1219
0639, 1639, 1640
0869
1142, 1442, 1443, 1444
0749, 0790, 0819, 1285, 1749
1392, 1640
0722, 0724
1535
1535
0869
1856
0476, 0810
Pioneer
0877, 1877
0476, 0810, 1187, 1376 Scientific Atlanta 0877, 1877
0237, 1877
Sony
1006
Supercable
Zenith
0276
0899
Dishpro
Echostar
Expressvu
Hughes Network
Systems
0775, 1505
0775, 1170, 1505
0775
JVC
Motorola
Philips
Proscan
1142, 1442, 1443, 1444
RCA
1170
0869
1142, 1442
0392
1392
Samsung
Sony
Star Choice
1442
0639, 1640
0869
Hewlett Packard
Hitachi
Howard Computers
HP
Hughes
Network Systems
Humax
Hush
iBUYPOWER
JVC
KEC
Kenwood
Kodak
Linksys
Lloyd’s
LXI
Magnasonic
Magnavox
Marantz
Marta
Matsushita
Media Center PC
MEI
Memorex
MGA
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
1972
0000, 0042, 0089
1972
1972
0067
0037
1972
1972
0035, 0226
0222
0037
1479
0035, 0077, 0225, 0226,
0227, 0378, 0616, 1035, 1244
0035, 0037, 0042, 1035, 1237
0042
0035
0035, 0618, 0739, 1081, 1181
0037
0067
0060, 1060
0039
0035, 0077, 1035
0000
0037
0037
0042, 0060, 0077, 0807,
0880, 1035, 1060
0000, 0035, 0037
0614, 0616
1972
0039
0045, 0739, 1014
0039
0000, 0067, 1479
0159
Scott
Sears
Sharp
Sonic Blue
General
Instrument
GOI
Goodmans
Hisense
Hitachi
HTS
Hughes
Hughes Network
Systems
iLo
Janeil
Jerrold
JVC
LG
0869
Magnavox
Memorex
Mitsubishi
Motorola
NEC
Next Level
Panasonic
Paysat
0722, 0724
0724
0749
0856, 0869
1270
0869
0152, 0247, 0701, 1786
0724
0099, 0722, 0724, 0749,
0819, 1076, 1142, 1442, 1749
1442
0392, 0566
1535
0869
0143, 0392, 0566, 0855, 1392
0775, 1775
1246
1535
0819, 1250
0775, 1775
0749, 1442, 1749
0749, 1142, 1442,
1443, 1444, 1749
1535
0152
0869
0775, 1170, 1775
1226, 1414
Philips
Pioneer
Proscan
Proton
RadioShack
RCA
)
Jerrold
Motorola
Pace
)
)
1972
0000
0000, 0037, 0124
0175
1972
0035
0037
1479
0037
0035
0037, 1278
0037
0035, 0060, 1035
1972
0045, 1278
1972
0042
0739
0039
0000
0037, 0043
0037
0032
0000, 0037, 0043, 1278, 1479
0033, 0035
0000
0000
1972
0035, 0060, 0807, 1035, 1060
0037, 1237
0000
0000
0042, 0739
0739
1972
1972
0067
0037
0067
0035, 0037
1972
0000
0037
1278
0000, 0035, 0039, 1781
0035
0037
0035
1972
0035
0000, 0035, 0037, 0039, 1237
0043
1972
1972
0042
0043, 0067, 0807
0035
0000
0000
NEC
Nikko
Niveus Media
Northgate
Olympus
Onkyo
Optimus
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Proscan
Pulsar
Quasar
RadioShack
Radix
Randex
RCA
Realistic
ReplayTV
Ricavision
Runco
Samsung
Sanky
Sansui
Sanyo
0043, 0045
0000, 0035, 0037, 0042, 1237
0807, 0848
0614, 0616
0000, 0032, 0033, 0035,
Sony
0636, 1032, 1232, 1972
Stack 9
1972
STS
0042
Sylvania
0000, 0035, 0043, 1781
Symphonic
0000
Systemax
1972
Tagar Systems 1972
Teac
0000
Technics
0035
Teknika
0000, 0035, 0037
Thomas
0000
Tivo
0618, 0636, 0739
0043, 0045, 0845,
Toshiba
1008, 1145, 1972
Totevision
0037
Touch
1972
Vector
0045
Video Concepts 0045
Videomagic 0037
Viewsonic
1972
Villain
0000
Voodoo
1972
Wards
0000, 0035, 0042, 0060
XR-1000
0000, 0035
Zenith
0000, 0033, 0039, 1479
ZT Group
1972
FAQs, etc.
Guide
VCR (
ABS
Adventura
Aiwa
Akai
Alienware
American High
Audiovox
Broksonic
Calix
Canon
Citizen
Craig
Curtis Mathes
CyberPower
Daewoo
Dell
Denon
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
Fuji
Funai
Garrard
Gateway
GE
GoldStar
Gradiente
Harley Davidson
Brand
Philips
Pioneer
Pulsar
Quasar
Regal
Runco
Samsung
Remote Control Operation/Code List
Onscreen Display
Guide
Brand
Scientific Atlanta
Sony
Starcom
Supercable
Torx
Toshiba
Zenith
Cable/PVR Combination (
Americast
0899
Digeo
1187
General Instrument 0476, 0810
Onscreen Display
Code
0009, 0273
0003, 0276, 0476, 0810
0000
1376, 0276, 0476, 0810, 1187
0008, 0237, 1877
0000, 0107
0000
)
AlphaStar
Chaparral
Crossdigital
DirecTV
-
Brand
Hamlin
Jerrold
Memorex
Motorola
Pace
Panasonic
Paragon
37
Remote Control Operation/Code List
Ratings List for Channel Lock
Ŷ Remote Control Code List
“V-chip” technology enables you to lock out channels or shows according to
standard ratings set by the entertainment industry. (p. 17)
DBS/PVR Combination (
)
Brand
Code
Hughes Network 0739
Systems
Brand
Philips
Samsung
)
1972
1972
1972
1972
0739
1972
1972
Hughes Network
Systems
Humax
Hush
iBUYPOWER
Linksys
Media Center
PC
Microsoft
Mind
1972
1972
Code
Brand
Code
Ŷ U.S. MOVIE RATINGS (MPAA)
0739
0739
1972
1972
1972
1972
1972
1972
Niveus Media
Northgate
Panasonic
Philips
RCA
ReplayTV
Sonic Blue
Sony
Stack 9
1972
1972
0616
0618, 0739
0880
0614, 0616
0614, 0616
0636, 1972
1972
Systemax
Tagar
Systems
Tivo
Toshiba
Touch
Viewsonic
Voodoo
ZT Group
Onkyo
0503, 0792
Panasonic
0490, 0503, 0632,
0703, 1010, 1011,
1362, 1462, 1490,
1762, 1967
Sensory
Science
1972
1972
0618, 0636, 0739
1008, 1972
1972
1972
1972
1972
DVD Recorder (
1056
1168
1086
1129
0675
1158
GoldStar
Gradiente
Grundig
Hitachi
Hiteker
Integra
LiteOn
Loewe
0741
0490
0539
0573, 0664
0672
0571
0558, 0623, 0867, 1164,
1275
0490, 0534
1533
0591, 0741, 0801,
0869
1158, 1440
0511
Magnavox
0503, 0539, 0646,
0675
Marantz
McIntosh
Memorex
Microsoft
Mitsubishi
NAD
NEC
0539
1533
0695
0522
0521, 1521
0591, 0741
0785
Go Video
JVC
LG
LiteOn
Magnavox
Panasonic
0741, 1158, 1304, 1730
1164, 1275
0741
1158, 1440
0646
0490, 1010, 1011
JVC
Kenwood
Lecson
LG
NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie has not been rated or
rating does not apply.
GENERAL AUDIENCES. All ages admitted.
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
ADULTS ONLY.
Philips
PianoDisc
0503, 0539, 0646,
0675, 1267, 1354
Sansui
Sanyo
1024
0525, 0571, 0631,
0632
1061, 1086
0539
0672
0522
0522, 0571, 0822
0869
0623
0752
0490, 0573, 0820,
1075
0695
0695, 0873, 1967
Philips
Pioneer
Polaroid
RCA
Samsung
0646
0631
1086
0522
0490
Pioneer
Polaroid
Polk Audio
Proceed
Proscan
RCA
Rio
Rotel
Sampo
Samsung
1158
0630, 0675, 0752,
1256
0533
0869
0533, 0864, 1033, 1431,
Sony
1533
Sylvania
0675
Symphonic
0675
Teac
0809
Technics
0490, 0703
Theta Digital 0571
Toshiba
0503, 0695, 1045, 1154
Urban
0503
Concepts
Xbox
0522
Yamaha
0490, 0539, 0545
Zenith
0503, 0591, 0741,0869
Sharp
Shinsonic
Sonic Blue
Age-based
Group
NR
(Not Rated)
Age-based
Ratings
TV-NR
TV-Y
Youth
TV-Y7
TV-G
TV-PG
Guidance
TV-14
TV-MA
FV: Fantasy/Cartoon Violence.
Possible Content
Selections
Viewable
Blocked
Viewable
Blocked
FV Blocked
Viewable
Blocked
Viewable
Blocked
D,L,S,V (all selected)
Any combination of D,
L, S, V
D,L,S,V (all selected)
Any combination of D,
L, S, V
D,L,S,V (all selected)
Any combination of L,
S, V
V: Violence
S: Sex
Description
Not Rated.
All children. The themes and elements in this program are specifically
designed for a very young audience, including children from ages 2-6.
Directed to older children. Themes and elements in this program may
include mild physical or comedic violence, or may frighten children under
the age of 7.
General audience. It contains little or no violence, no strong language,
and little or no sexual dialogue or situations.
Parental guidance suggested. The program may contain infrequent
coarse language, limited violence, some suggestive sexual dialogue and
situations.
Parents strongly cautioned. This program may contain sophisticated
themes, sexual content, strong language and more intense violence.
Mature audiences only. This program may contain mature themes,
profane language, graphic violence, and explicit sexual content.
L: Offensive Language
D: Dialogue with sexual content.
Ŷ CANADIAN ENGLISH RATINGS (C. E. L. R)
)
Sensory
Science
Sharp
Sony
Sylvania
Zenith
E
1158
0675
1033, 1431
0675
0741
C
C8+
G
PG
Exempt - Exempt programming includes: news, sports, documentaries and other information programming,
talk shows, music videos, and variety programming.
Programming intended for children under age 8. No offensive language, nudity or sexual content.
Programming generally considered acceptable for children 8 years and over. No profanity, nudity or sexual content.
General programming, suitable for all audiences.
Parental Guidance suggested. Some material may not be suitable for children.
14+
Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are
strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens.
18+
18+ years old. Programming restricted to adults. Contains constant violence or scenes of extreme violence.
Ratings List for Channel Lock
Remote Control Operation/Code List
1094
0869
0672, 0794, 0796,
Apex Digital 0797, 1004, 1056,
1061, 1100
Aspire Digital 1168
Blue Parade 0571
Broksonic
0695
California
0490
Audio Labs
CineVision
0833, 0869
Coby
1086
CyberHome 0816, 1023, 1024, 1129
Daewoo
0833, 0869
Denon
0490
Disney
0675
DVD2000
0521
Emerson
0591, 0675
Enterprise
0591
Funai
0675
Gateway
1158
GE
0522
0741, 0833, 0869,
Go Video
1075, 1158, 1304, 1730
G
PG
PG-13
R
NC-17
X
Ŷ U.S. TV PROGRAMS RATINGS (U. S. T. V)
)
Adcom
Allegro
Apex Digital
Aspire Digital
Coby
CyberHome
Funai
Gateway
Brand
Off
PVR(
ABS
Alienware
CyberPower
Dell
DirecTV
Gateway
Hewlett Packard
Howard
Computers
HP
DVD (
Code
0739
0739
Ŷ CANADIAN FRENCH RATINGS (C. F. L. R)
E
8 ans+
13 ans+
16 ans+
18 ans+
38
Exempt - Exempt programming.
General - Programming intended for audience of all ages. Contains no violence, or the violence content is minimal
or is depicted appropriately.
8+ General - Not recommended for young children. Programming intended for a broad audience but contains light
or occasional violence. Adult supervision recommended.
Programming may not be suitable for children under the age of 13 - Contains either a few violent scenes or one or
more sufficiently violent scenes to affect them. Adult supervision strongly suggested.
Programming may not be suitable for children under the age of 16 - Contains frequent scenes of violence or intense
violence.
Programming restricted to adults. Contains constant violence or scenes of extreme violence.
FAQs, etc.
G
39
Technical Information
Closed Caption (CC)
•
••
DIGITAL AUDIO OUT terminals
For viewing Closed Caption of digital broadcasting, set the aspect ratio to FULL.
(If viewing with H-FILL, JUST, ZOOM or 4:3, characters will be cut off.)
The closed caption is not displayed when you use HDMI connection.
If analog connected equipment is used for displaying or recording, closed caption (CC) should be set On/Off on the
connected equipment.
The CC mode setting of the TV will not affect the analog input.
If a digital program is being output in analog format, the CC data will also be output in analog format.
If digital connected equipment is used for input, CC should be set On on either the connected equipment or the TV.
If CC is set On on both the connected equipment and the TV, captions from each unit will overlap.
You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier
to the DIGITAL AUDIO OUT terminals.
•
••
Caution
Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable
optical output.
External speakers cannot be connected directly to OUTPUT terminals.
When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC
channel is selected, the output will be PCM.
Control with HDMI “HDAVI ControlTM”
Aspect Ratio
Let you choose the aspect depending on the format of the received signal and your preference. (p. 11) (e.g.: in case
of 4:3 image)
FULL
JUST
•
•
FULL
JUST
HDMI connections to some Panasonic equipment allow you to enjoy easy playback.
Setup the equipment to enable this function. Read the manual of the equipment.
Switch the TV unit on again with the equipment on when connection or setup is changed.
This function may not work normally depending on the equipment condition.
The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
••
••
••
HDMI connection
Enlarges the 4:3 image horizontally to the screen’s side edges.
(Recommended for anamorphic picture)
Stretches to justify the 4:3 image to the four corners of the
screen.
(Recommended for normal TV broadcast)
•
•
H-FILL
4:3
H-FILL
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting
the TV unit and the equipment.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected
to the HDMI connector using an HDMI compliant (fully wired) cable.
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
Audio settings can be made on the “HDMI in” menu screen. (p. 14-15)
Applicable audio signal sampling frequencies (L.PCM): 48 kHz, 44.1 kHz, 32 kHz
••
••
(*1): The HDMI logo is displayed on an HDMI-compliant equipment.
(*2): Enquire at your local digital equipment retailer shop.
Side bar
Enlarges the 4:3 image horizontally to the screen’s side edges.
The side edges of the image are cut off.
ZOOM
ZOOM
Enlarges the 4:3 image to the entire screen.
(Recommended for Letter Box)
•
•
••
Note
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) : FULL,
JUST, 4:3 or ZOOM
1080i / 720p : FULL, H-FILL, JUST or 4:3
When the signal is 720p/1080i, the aspect mode
automatically defaults to Full after turning off the TV,
after changing input mode, or after changed signal
resolution other than 720p/1080i.
Use with a PC is not assumed.
All signals are reformatted before being displayed on the screen.
If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
This HDMI connector is “type A”.
Equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S VIDEO”, or
“VIDEO” to receive analog signals.
The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080i
Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see below.
Input signals that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR) and HDMI
525 (480) / 60i
525 (480) /60p
750 (720) /60p
1,125 (1,080) /60i
horizontal
frequency (kHz)
15.73
31.47
45.00
33.75
vertical
frequency (Hz)
59.94
59.94
59.94
59.94
COMPONENT
HDMI
*
*
*
*
*
*
*
*
Note
••
Signals other than those shown above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
••
•
Vivid (default)
Standard
Cinema
FAQs, etc.
Zoom adjust
Vertical image position and size can be adjusted in “ZOOM.”
Select “Zoom adjust” on the “Picture” menu. (p. 14-15)
V-Position: Vertical position adjustment
Size: Vertical size adjustment
••
••
•
•
•
Technical Information
•
Standard
(Note that “after image” of the side bar may occur from
displaying it for a long time.)
Caution
Pic. mode
40
•
To reset the aspect ratio
(OK)
: Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
: Recommended for normal viewing conditions with subdued room lighting.
: For watching movies in a darkened room. It provides a soft, film-like picture.
41
FAQ
Maintenance
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or
a soft, lint-free cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to
remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of
the same type, until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact
with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the surface may be
adversely affected.
•
•
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Servicenter for assistance. For details (p. 47, 48)
For additional assistance, please contact us via the website at:
www.panasonic.com/contactinfo
www.panasonic.ca
White spots or
shadow images
(noise)
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry.
Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
Do not allow any detergent to come into direct contact with the surface of the LCD TV.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents and thinner; otherwise, the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
•
•
•
Power cord plug
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)
•
Check the position, direction,
and connection of the aerial.
Interference or
frozen digital
channels
(intermittent sound)
Change the direction of antenna
for digital channels.
Check “Signal meter” (p. 19).
If the signal is weak, check the
antenna and consult your local
dealer.
•
42
There are some looseness around
the panel to prevent the damage to
the panel.
The panel might move slightly
when it is pushed with a finger, and
clattered sound might be heard.
This is not a malfunction.
Is the HDMI cable connected properly?
(p. 22-23, 41)
Turn Off the TV unit and equipment, then
turn them On again.
Check an input signal from the equipment.
(p. 41)
Use a equipment compliant with
EIA/CEA-861/861B.
The remote control does
not work
••
•
Are the batteries installed correctly? (p. 6)
Has the battery run down?
To operate external equipment of other
manufacturers, register the
remote control codes. (p. 20, 37-38)
FAQs, etc.
The LCD panel
moves slightly when
it is pushed with a
finger
Clattered sound
might be heard
•
•
•
•
Frequently Asked Questions
Maintenance
•
•
Pictures from external
equipment are distorted
when the unit is
connected via HDMI
43
Specifications
Interference
Normal Sound
•
•
•
Noisy Sound
•
No Sound
•
No Picture
No color
Weak or No Sound
Weak, Wrong or No Sound
Cannot operate with the remote control.
•
Sound reception may have deteriorated.
Set STEREO/SAP/MONO setting to SAP or MONO until reception improved.
•
•
The main unit is hot.
“Control with HDMI”
function does not work
44
•
••
The main unit radiates heat and some of the parts may become hot. This is
not a problem for performance or quality.
Set up in a location with good ventilation.
Do not cover the ventilation holes of the TV with a tablecloth, etc., and do
not place on top of other equipment.
This is a characteristic of liquid crystal panels and is not a problem. The
liquid crystal panel is built with very high precision technology giving you
fine picture details. Occasionally, a few non-active pixels may appear on the
screen as fixed points of red, blue, green, or black.
Please note this does not affect the performance of your LCD.
Switch the TV unit on again with the equipment on.
Set “Control with HDMI” to “Off”, then set to “On” again. (p. 21)
26.0 ” DIAGONAL (66.1 cm DIAGONAL)
31.5 ” DIAGONAL (80.0 cm DIAGONAL)
22.7 ” × 12.8 ” × 26.0 ”
(576 mm × 324 mm × 661 mm)
27.5 ” × 15.4 ” × 31.5 ”
(698 mm × 392 mm × 800 mm)
(No. of pixels)
1,049,088 (1,366 (W) × 768(H))
Speaker
2.36 ” × 4.7 ” (60 mm × 120 mm) Full-range × 2 pcs
Audio Output
20 W [ 10 W + 10 W ] ( 10 % THD )
Headphones
M3 (3.5mm) Jack × 1
[4,098 × 768 dots]
: 32 °F -95 °F (0 °C – 35°C)
INPUT 1-2
VIDEO
S VIDEO
AUDIO L - R
: RCA PIN Type × 1 1.0 V[p-p] (75 ȍ)
: Mini DIN 4-pin Y:1.0 V[p-p] (75 ȍ) C:0.286 V [p-p] (75 ȍ)
: RCA PIN Type × 2 0.5 V [rms]
INPUT 3
VIDEO
AUDIO L - R
: RCA PIN Type × 1 1.0 V [p-p] (75 ȍ)
: RCA PIN Type × 2 0.5 V [rms]
COMPONENT
VIDEO INPUT
Y
PB, PR
AUDIO L-R
: 1.0 V [p-p] (including synchronization)
: ±0.35 V [p-p]
: RCA PIN Type × 2 0.5 V [rms]
HDMI
AUDIO IN
TYPE A Connector × 1
AUDIO L - R
: RCA PIN Type × 2 0.5 V [rms]
OUTPUT
VIDEO
AUDIO L - R
DIGITAL AUDIO OUT
PCM / Dolby Digital, Fiber Optic
: RCA PIN Type × 1 1.0 V [p-p] (75 ȍ)
: RCA PIN Type × 2 0.5 V [rms]
3D Y/C Digital Comb Filter, CLOSED CAPTION, V-Chip
HDMI
Vesa compatible
FEATURES
Including TV stand
25.9 ” × 20.7 ” × 11.8 ”
(657 mm × 525 mm × 300 mm)
31.1 ” × 24.2 ” × 11.8 ”
(791 mm × 615 mm × 300 mm)
TV Set only
25.9 ” × 18.6 ” × 4.6 ”
(657 mm × 473 mm × 117 mm)
31.1 ” × 22.2 ” × 4.6 ”
(791 mm × 563 mm × 117 mm)
Weight
36.4 lb. (16.5
) NET
43.0 lb. (19.5
[TC-26LX60 / TC-26LE60]
25.9 ” (657 mm)
19.8 ” (504 mm)
•
) NET
[TC-32LX60 / TC-32LE60]
4.6 ” (117 mm)
31.1 ” (791 mm)
11.8 ” (300 mm)
4.6 ” (117 mm)
19.8 ” (504 mm)
11.8 ” (300 mm)
Note
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
FAQs, etc.
There may be red spots, blue spots,
green spots and black spots on the
screen.
The battery/ies is/are exhausted.
The batteries’ polarity is wrong.
The remote control sensor is exposed to strong light from a fluorescent
lamp, etc.
16:9
Visible screen size
(W × H × Diagonal)
Temperature
Color controls set at minimum levels.
Weak signal.
•
Aspect Ratio
VHF/ UHF : 2-69, CATV:1-135
TV set to AV mode.
Not plugged into wall outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Retune Channel (s).
126 W
2.4 A
0.6 W
Operating Conditions
Volume level.
Sound mute switched on.
STEREO/SAP/MONO
•
113 W
2.2 A
0.6 W
Channel Capability
ATSC/NTSC (Digital/Analog)
Dimensions
(W × H × D)
Normal Picture
Normal Sound
Electrical appliances.
Cars / Motorcycles.
Fluorescent lights.
Average use
Maximum Current
Standby condition
Specifications
Frequently Asked Questions
Poor or Distorted Picture
No Sound
Antenna location, direction or connection.
Connection Terminals
Normal Picture
Antenna location, direction or connection.
Sound
Multiple Images
Noisy Sound
TC-32LX60 / TC-32LE60
AC 120 V, 60 Hz
22.2 ” (563 mm)
Snowy Picture
Checks
Sound
20.7 ” (525 mm)
Picture
Power Consumption
Symptoms
TC-26LX60 / TC-26LE60
Power Source
24.2 ” (615 mm)
If there is a problem with your TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
18.6 ” (473 mm)
FAQ
45
Limited Warranty (for U.S.A.)
Customer Services Directory (for U.S.A.)
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF:
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way
Secaucus, New Jersey 07094
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase
Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
PANASONIC SALES COMPANY,
DIVISION OF:
PANASONIC PUERTO RICO, INC.
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park
Carolina, Puerto Rico 00985
Panasonic LCD Televisions
Limited Warranty
PARTS
LABOR
1 (ONE) YEAR
1 (ONE) YEAR
http://www.panasonic.com/consumersupport
or, contact us via the web at:
http://www.panasonic.com/contactinfo
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer
Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at
its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished
product. The decision to repair or replace will be made by the warrantor.
LCD TV CATEGORIES
Up to 20’ (diagonal)
21” (diagonal) and larger
Customer Services Directory
SERVICE
Carry-In or Mail-in
In Home or Carry-in / Mail in
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will
be no charge for parts. You must carry-in or mail-in your product during the warranty period. If non-rechargeable
batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was
not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
In-Home service requires clear, complete and easy access to the product by the authorized servicer and does
not include removal or re-installation of an installed product. It is possible that certain in-home repairs will not be
completed in-home, but will require that the product, or parts of the product, be removed for shop diagnosis and/or
repair and then returned.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting
from viewing fixed images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, or nonexpanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The
warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel,
office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or
other Authorized Servicer, or damage that is attributable to acts of God.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a
problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter.
If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the
addresses listed for the warrantor.
Accessory Purchases
Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web
Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
ŶFor hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
FAQs, etc.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this
excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to
and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE
LIMITED WARRANTY.
ŶFor hearing or speech impaired TTY users, TTY : 1-877-833-8855
Customer Services Directory (for U.S.A.)
Limited Warranty (for U.S.A.)
In-Home or Carry-in Service
For In-Home or Carry-In Service in the United States call 1-800-211-PANA(7262) or visit the Panasonic web Site:
http://www.panasonic.com.
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768- 2910.
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH
ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
46
47
Limited Warranty (for Canada)
Note
Panasonic Canada Inc.
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to
remedy any such defect for a period as stated below from the date of original purchase.
Plasma TV / Monitor
In-home service
One (1) year, parts (including Plasma Panel) and labour.
LCD TV (26 in & over)
In-home service
One (1) year, parts (including LCD Panel) and labour.
LCD TV (25 in & under)
Carry-in service only
One (1) year, parts (including LCD Panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized
Panasonic service facility.
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly
installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping,
or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor
does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this
warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original
purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact:
Our Customer Care Centre:
Telephone #: (905) 624-5505
1-800 #:
1-800-561-5505
Fax #:
(905) 238-2360
Email link:
“Customer support” on www.panasonic.ca
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link: “Servicentres™ locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
Limited Warranty (for Canada)
In-home service requires clear, complete and easy access to the product by the Authorized Servicentre and does not
include removal or re-installation of an installed product. If removal is required to service the product, it will be at the
discretion of the Servicentre and in no event will Panasonic Canada Inc. or the Servicentre be liable for any special,
indirect or consequential damages.
FAQs, etc.
48
49
Note
50
Note
51
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement