Product Catalog 020613.qxp - Leeds Precision Instruments

Product Catalog 020613.qxp - Leeds Precision Instruments
LEEDS
EXPERIENCE OUR VISION
PRODUCT CATALOG
A
Full
Spectrum
of
Products
www.leedsmicro.com
February 2013
Ta b l e
of
Contents
Stands
Part Number
LMS-100
LMA-036A
LMS-150
LMS-197
LMS-197-24
LMS-197K
LMS-198
LMS-198-24
LMS-200
LMS-200B
LMS-200-24
LMS-201
LMS-300
LPI-Z+STP
LPI-Z+FLT
LPI-Z+KOE
LPI-Z+BFO
LPI-Z-STAD
LPI-Z+BXARM
LPI-Z+MVXARM
LPI-Z+FOFARM
LPI-KSTAND
LPI-DCS
Description
Complete Boom stereoscope stand
Drop prevention collar
Heavy boom base & 24” column
14” Vertical column with table clamp
24” Vertical column with table clamp
C-Clamp Mount with Articulating arm
14” Vertical column with flange mount
24” Vertical column with flange mount
Boom base & 14” column
Extra Weight for LMS-200 Boom Stand
Boom stand base & 24” column
Ball bearing boom arm
Articulating boom arm - double jointed fold away design
Z-plus Stand with Stepper Motor
Z-plus Stand with Floating Arm
Koehler Illumination Module
BF/Oblique Illuminator
Simple Stage Adapter
BX3 URA Mounting Arm
BX3 URA Mounting Arm
FOF and BXFM Mounting Arm
K Stand base for bonder arm
Digital Copy Stand with 1 camera mount and 2 sliders
Page Number
S-1
S-2
S-2
S-2
S-2
S-2
S-2
S-2
S-2
S-2
S-2
S-2
S-2
S-3
S-3
S-3
S-3
S-3
S-3
S-3
S-3
S-4
S-5
Description
BF/DF transillumination LED base
400mm pillar
Drop prevention collar
Ergo head riser
LED Spot Illuminator
Mounting Adapter for LMS-340LED with Olympus 32mm post
LED Transmitted Light Base
Top Mounting plate for LMS-225LED
LED Spot light only for LMS-225LED
LED Spot light kit, including base, arm & power control
Mounting adapter for Olympus SZ2-ST stand
Mounting adapter for LMS-225LEDSL -Accu-Scope
Page Number
B-1
B-1
B-1
B-1
B-2
B-2
B-2
B-2
B-2
B-2
B-2
B-2
Description
Ergo head riser
BH2-SH Horizontal Control Stage
Digital Copy Stand
Page Number
T-1
T-1
T-1
Bases
Part Number
LMS-340LED
LPI-S-0204
LMS-SZX-R
LMS-EHR2
LMS-LEDS
LMS-LEDS-3
LMS-225LEDSL
LMS-225ZEPLT
LMS-LEDS
LMS-LEDSK
LMS-LEDS-2
LMS-LEDS-4
Stages
Part Number
LMS-EHR2
4-LB406A
LPI-DCS
Lighting
Part Number
LRL-410
LMA-060
LMA-061
LMA-063
LMS-LEDS
LMS-LEDSK
LMS-LEDS-2
LMS-LEDS-3
LMS-LEDS-4
LMS-LEDFO
LRL-410
Description
Page Number
High clearance ringlight - 4-ft length
Thread adapter
Ferrule for Dolan Jenner 180
Ferrule for Fostec
LED Spot Illuminator
LED Spot Illuminator Kit
Mounting Adapter for LMS-225LEDSL with Olympus SZ2-ST Stand
Mounting Adapter for LMS-340LED with Olympus 32mm post
Mounting Adapter for LMS-225LEDSL with Accu-Scope
5700K LED Light SourceHigh clearance ringlight - 4-ft length
L-1
L-1
L-1
L-1
L-2
L-2
L-2
L-2
L-2
L-3
L-3
Accessories
Part Number
LBX-DLH
LBX-FOMET
LPI-U-UCLH
SHM-RMS
LCT-UPOL-SL
LPI-UVCHLR
LPI-UVHLB
LMS-EHR2
LMS-340LED
LPI-S-0204
LMS-SZX-R
LPI-EAR.25
Description
Dual lamphouse adapter
Fiber optic lamphouse adapter
Collector lens assembly
Set of 70 shims for RMS size thread
6-U310 Condenser and Slider modification
Universal C-Shaped Holder
Universal holder, large bore
Ergo head riser
BF/DF transillumination LED Base
400mm pillar
Drop prevention collar
1/4” x 13 1/2” x 15” Anti-vibration pad
Page Number
A-1
A-1
A-1
A-2
A-3
A-4
A-4
A-5
A-5
A-5
A-5
A-6
Description
Inclination joint kit
Olympus bonder arm with LMA-058 installed
With LMA-058 Installed
Mount for A08520 to LMS-300
Retractable Arm for the bonder mount
Retractable Arm for the stereoscope
Page Number
M-1
M-1
M-1
M-2
M-3
M-3
Mounts
Part Number
LMA-058
S-0266M
S-02662M
LMS-300BIFO
LMS-350SZ
LMS-350SZX
Ergonomic Vision Systems
Part Number
ERGOV1-11111
ERGOV2-12211
ERGOV3
LPI-ERGO-S2
Description
Leeds’ Ergonomic Vision System V1
Leeds’ Ergonomic Vision System V2 in high definition
Leeds’ Ergonomic Vision System V3
Software for Ergo V3 Systems
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
Page Number
E-1
E-2
E-3
E-3
Tables
Part Number
LBX-02HTBL-1
LBX-05HTBL-H
LBX-10HTBL-H
LBX-10HTBL-B2
LBX-18HTBL-2PCS
LCT-TBLB
Description
26x42 Dual View scope table
Microscope Table H Design
10 Headed Microscope Table H Design
10 Position Microscope Table, Straight Design
18 Head Microscope Table, 2 pc
26” x 28” Motorized Table
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
Page Number
X-1
X-2
X-3
X-4
X-5
X-6
STANDS
Leeds Products
STANDS
Complete Boom Stereoscope Stand
LMS-100
The LMS-100 is used where wide horizontal and/or tall
vertical viewing is needed. The LMS-100 is weighted
and rigid with no need for a counter balance. The
vertical column is 15 ¾” tall and is made of solid,
nickel plated steel. When measured from the center of
column to center of the field of view of a stereoscope,
the horizontal arm has a 22 ¾”reach. The arm has a
flat surface to prevent accidental rotation of the
stereoscope body, and a drop prevention collar
secures the vertical height of the stereoscope above
the work surface - eliminating any accidents if you
swing the horizontal arm to another position. The arm
is designed to hold a bonder style focus mount with a
5/8” diameter post mount. The base is 1” x 10” x 10”
steel.
To configure a stand that will meet your specific needs, please see
our line of modular components described on page S-1.
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
S-1
Leeds Products
STANDS
Leeds’ Custom Boom Stand
Components for Stereo Microscopes
For a complete boom stand you will
need:
1) Column assembly
2) Drop prevention collar
3) Arm assembly
LMA-036A
LMA-036A
LMS-150
LMS-150
Drop prevention collar
Heavy boom base & 24” column
(2” x 10” x 16”, 105 lbs total weight)
LMS-197
16” Vertical column with table clamp
LMS-197-24 24” Vertical column with table clamp
LMS-197K C-Clamp mount with articulating arm
LMS-198
14” Vertical column with flange mount
LMS-198-24 24” Vertical column with flange mount
LMS-200
Boom base & 14” column
(same as used on the LMS-100 complete stand)
LMS-197
LMS-200B
LMS-200
LMS-200B Extra Weight for LMS-200 boom stand
LMS-200-24 Boom stand base & 24” column
LMS-201
Ball bearing boom arm provides for
smooth easy 21” horizontal movement
along arm. It is designed to hold
a bonder style focus mount with a 5/8”
diameter post mount.
LMS-198
LMS-300
Articulating boom arm has a double
jointed fold away design to save space at
the workstation and does not have a rear
protrusion like the rigid boom arms have.
It is made to fit any of the column
assemblies on this page. When measured
from the center of column to center of
“field of view” of a stereoscope, the
horizontal arm has a 24 ½” reach. This
LMS-300
arm is designed to hold a bonder style
focus mount with a 5/8” diameter post
mount.
Leeds Products
LMS-201
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]o.com
www.leedsmicro.com
S-2
LEEDS Products
STANDS
Z Plus Stand - BX3 Components
LPI-Z+BXARM
LPI-Z+KOE
The Leeds Z Plus Stand is shown with
BX3 URA mounting arm and Köehler
illumination module.
The
The
The
The
LPI-Z+KOE
LPI-Z+KOE
LPI-Z+KOE
LPI-Z+KOE
Order Product Number
LPI-Z+STP
Z-plus Stand w/ Stepper Motor
LPI-Z+FLT
Z-plus Stand w/ Floating Arm
LPI-Z+KOE
Köehler Illumination Module
LPI-Z+BFO
BF/Oblique Illuminator
LPI-Z-STAD
Simple Stage Adapter
LPI-Z+BXARM
BX3 URA Mounting Arm
LPI-Z+MVXARM
BX3 URA Mounting Arm
LPI-Z+FOFARM
FOF and BXFM Mounting Arm
Köehler Illuminator Module for the Z Plus Stand is designed for a fixed stage height.
has a field diaphragm and filter cassette that can hold up to four filters.
will accept any choice of stage, condenser and lamp housing.
can also accept the LPI-Z+FOK fiber optic illumination kit.
The LPI-Z+BXARM Optical Arm, when added to the Z Plus Stand, allows for use of reflected light
microscope components.
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
S-3
STANDS
LEEDS Products
Weighted Base for use with Existing
Tabletop Work Surface
- Heavy steel base. Adds 7” to 14” Height adjustment
range to the range of bonder arm selected.
- Can be used with any bonder style microscope arm.
LPI-KSTAND shown with S-02662-M on
14” column
Order Product Number
LPI-KSTAND
LPI-KSTAND-E
S-02662-M
K Stand base for bonder arm
K Stand base for bonder arm
mount extended
Modified Olympus SZ2-STBI Style
bonder arm inclinable
LPI-KSTAND K Stand base shown with
S-02662-M with 7” column
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
S-4
STANDS
LEEDS Products
Simple Copy Stands
All attachments on the LPI-DCS
stand can be adjusted using a
3mm wrench.
Leeds’ LPI-DCS simple copy stands column have a dovetail on all four sides,
which allows for accessories like cameras and lighting (shown above) to be
added easily. Camera and lighting are
optional accessories.
Order Product Number
LPI-DCS
Digital Copy Stand with 1 camera mount
and 2 sliders
The Leeds Custom Products
Department can design and build a
wide range of custom simple copy
stands to meet any of your projects
needs.
Please contact Leeds for more
information on our complete line of
simple copy stands.
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
S-5
BASES
LEEDS Products
BASES
LED Transillumination Base
Bright Field/Dark Field
LMS-340LED bright field/dark field
LED transillumination base
LMS-LEDS
LMS-340LED bright field/dark
field base shown with a stereo
body and LMS-EHR2 ergo riser.
Leeds LMS-340LED bright field/dark field, transillumination
LED base. Bright field/dark field selection is done by a slide
control. The glass stage plate is included. Base has integral
power supply for LMS-LEDS spot illuminator. When
purchasing LMS-LEDS spot illuminator to use with
LMS-340LED base, the LMS-LEDS-3 adapter will be
required.
Order Product Number
LMS-340LED
LPI-S-0204
LMS-SZX-R
LMS-EHR2
LMS-LEDS
LMS-LEDS-3
LMS-340LED shown with LMSLEDS-3 required adapter (includes
post mount, flexible arm adapter
to hold LMS-LEDS Leeds LED
Spot illuminator.
BF/DF transillumination LED base
400mm pillar
Drop prevention collar
Ergo head riser
Leeds LED Spot Illuminator
Adapter for LMS-340LED
Can also be used with other manufacturers stereo
microscopes.
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
B-1
BASES
LEEDS Products
LED Transmitted Light Base
LMS-225ZEPLT Top mounting plate
required if using base with microscope brands other than Olympus.
LMS-225LEDSL base
LMS-LEDS
attaches here
The LMS-225LEDSL self-contained tuck-under base is ideal for a clutter-free
bench to workspace. This base can be customized to work Olympus and
other brand microscopes. When purchasing base to work with a microscope
brand other than Olympus, the base will require a LMS-225ZEPLT top
mounting plate. The top mounting plate will need to be customized to fit
your brand microscope.
The base has a dual power supply for two LED light sources; internal transmitted and reflected illumination (designed for Leeds’ LMS-LEDS Spot
illuminator). Both sources can be used at the same time and have their own
light level control switches. When ordering an LMS-LEDS Spot illuminator, an
adapter will be required to hold illuminator. For Olympus microscope, please
order adapter LMS-LEDS-2. For other brand microscopes, please order
adapter LMS-LEDS-4.
The LMS-225LEDSL uses a LED light with an adjustable intensity control for
transmitted and reflected light, that fills the field with light at a zoom
setting as low as .8x.
The internal mirror can be rotated 360 degrees and has a sliding feature for
an oblique lighting effect. The rotatable mirror has a mirrored surface on one
side, and a grey metallic surface on the other side - which allows for a better
diffused lighting on samples.
The base attaches with three screws and can be easily installed with a #1
cross point screwdriver.
LMS-225LEDSL shown with
Olympus microscope.
The LMS-LEDS reflected LED spot lighting is powered with the
LMS-225LEDSL base. This reflected LED spot lighting can also be a stand
alone reflected light source if ordered as LMS-LEDSK, LED Spot Lighting Kit.
This kit Includes a weighted base, flex arm and power supply with
dimmer control.
Order Product Number
LMS-225LEDSL
LMS-225ZEPLT
LMS-LEDS
LMS-LEDSK
LMS-LEDS-2 mounting
adapter for Olympus
LMS-LEDS-2
LMS-LEDS-4
LED Transmitted Light Base
W/Sliding Mirror for SZ2-ST Stand
Top Mounting Plate for LMS-225LED
LED Spot Light only for LMS-225LED
LED Spot Light Kit, Including Base,
Arm & Power Control
Mounting adapter for Olympus SZ2ST stand
Mounting adapter for LMS-225LEDSL Accu-Scope
LMS-LEDS Leeds LED
spot Illuminator
LMS-LEDSK LED Spot
Light Kit
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
B-2
STAGES
LEEDS Products
STAGES
Adjustable Height Stage
The Leeds Adjustable Height Stage Mount
combines the LMS-EHR2 Ergo riser head
with the 4-LB406A Stage and is shown with
the LPI-DCS Copy Stand. The LMS-EHR2
Ergo riser head has a 4” height adjustment
range and advances at ¼” per turn of the
adjusting ring.
The LMS-EHR2, used as an adjustable
height stage mount, has a wide range of
stage base mounts available and can be
used with all microscope brands. Please
contact Leeds’ Custom Department for
more information.
Order Product Number
LMS-EHR2 Ergo Riser Head
4-LB406A
BH2-SH Horizontal Control Stage
LPI-DCS
Digital Copy Stand
Adapters (Please discuss with Leeds
Custom Department)
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
T-1
LIGHTING
LEEDS Products
LIGHTING
High Clearance Ringlight
The Leeds fiber optic ringlight maintains a full 4.2”
working distance when mounted on a stereoscope.
The narrow side profile doesn’t interfere with hand or
tool movement.
The Leeds ring light provides an even diffusion of light
without hot spots or holes. The fiber optic bundle,
which is available in various lengths, exits upward to
stay out of the field of motion.
LRL-410
The ringlight mounts quickly with a screw-on coupler,
and your choice of ferrule (please note that all three
parts are necessary, and are ordered via separate part
numbers).
LMA-060
Screw-on end for
various ferrules
LMA-061
Order Product Number
LRL-410
LMA-060
High clearance ringlight - 4-ft length
Thread adapter
Choose a ferrule to fit your light source: (others are also
LMA-063
available, call for info).
LMA-061
LMA-063
Ferrule for Dolan Jenner 180
Ferrule for Fostec
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
L-1
LEEDS Products
LIGHTING
LED Spot Illuminator and Kit
LMS-LEDS Leeds
LED spot
Illuminator
Leeds’ LMS-LEDS LED spot illuminator is a powerful
LED light source. The LMS-LEDS is versatile enough
to work with either the LMS-225LEDSL transmitted
light base or the LMS-340LED bright field/dark field
LED transillumination base. When ordering the LED
spot illuminator for either Leeds base, a specified
adapter will be required. The LMS-LEDS-2 mounting
adapter is required for the LMS-225LEDSL when using
with Olympus SZ2-ST stand. The LMS-LEDS-3 mounting adapter is required for the LMS-340LED Olympus
32mm post. The LMS-LEDS-4 mounting adapter is
required for the LMS-225LEDSL when using with
Accu-scope microscope.
Leeds LMS-LEDSK LED Spot Illuminator kit includes
the LED spot illuminator, a weighted base, arm,
coupler and power supply.
Order Product Number
LMS-LEDSK LED Spot
Illuminator Kit
LMS-LEDS-2 mounting adapter for
Olympus
LMS-LEDS Leeds LED Spot Illuminator
LMS-LEDSK LED Spot Illuminator kit includes Base,
Arm, Coupler and power supply
Adapters for LMS-LEDS
LMS-LEDS-2 Mounting adapter for Olympus SZ2-ST
Stand
LMS-LEDS-3 Mounting adapter for Olympus 32mm
post
LMS-LEDS-4 Mounting adapter for LMS-225LEDSL
Accu-Scope
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
L-2
LEEDS Products
LIGHTING
LED Cube Illuminator
The LMS-LEDFO Leeds LED cube illuminator is a fiber
optic light source offering constant color temperature at
all intensities with low maintenance, and no vibration.
The LED in the LMS-LEDFO is rated for over 10,000
hours, eliminating the cost of halogen bulb replacements. By having no fan, the LED cube illuminator
requires minimal cleaning and does not induce vibration
into optical systems. In addition, the LED cube has no
thermal component to its light.
The Leeds LMS-LEDFO cube illuminator can be used
with the 10mm diameter fiber optic light guides, as
shown with the LRL-410 Leeds high clearance ringlight.
The optional pole clamp allows the LED cube illuminator
to be attached to a boom stand offering no vibration
interference and freeing up work space. The LED cube
illuminator mounts quickly with a screw-on pole clamp.
LMS-LEDFO cube illuminator
shown on a boom stand
Order Product Number
LMS-LEDFO
5700K LED Cube Illuminator
LMS-LEDFO LED cube illuminator
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
L-3
ACCESSORIES
LEEDS Products
ACCESSORIES
Fiber Optic Lamphouse Adapter
The Dual lamphouse adapter allows for the usage of
two light sources on one microscope system.
For use with:
Reflected light illuminator.
It is easy to switch from one light source to the other
with the turn of a knob. The indicator arrows on the
knob shows which light source is selected.
LBX-DLH
The LBX-FOMET allows for the use of fiber optic
type lighting with reflected light illuminator on
microscope stands.
LBX-FOMET
Order Product Number:
LBX-DLH Dual lamphouse adapter
LBX-FOMET Fiber optic lamphouse adapter
LPI-U-UCLH
collector lens
(not included)
(The adapter is designed for a fiber optic bundle with a ferrule
diameter of .393” x 1 ¼” length. The adapter requires usage
of the LPI-U-UCLH collector lens assembly).
LPI-U-UCLH
Collector lens assembly
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
A-1
LEEDS Products
ACCESSORIES
Parfocaling Shim Set
The Leeds parfocal shim set can aid in bringing a set
of objectives into parfocality on a microscope.
The brass or stainless steel shims fit over the RMS or
NEO thread of the objective.
Each shim set contains ten each of seven different
thicknesses of shims. Thicknesses are (in inches):
.001, .002, .003, .004, .005, .007, .010.
Available for RMS or NEO thread size.
RMS Size Shims
Order Product Number
SHM-RMS
Set of 70 shims for RMS size thread
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
A-2
LEEDS Products
ACCESSORIES
LCT-UPOL-SL Condenser with
Polarizer on Slider
The LCT-UPOL-SL allows for a quick removal of the polarizer unit
from the transmitted light raypath, which increases light intensity
by 2/3 and extending the life of the polarizer (the 6-U310 is
included with the LCT-UPOL-SL).
Order Product Number
LCT-UPOL-SL
6-U310 Condenser and Slider
Modification
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
A-3
ACCESSORIES
LEEDS Products
Universal Holders
LPI-UVHLR back view
LPI-UVCHLR
The LPI-UVCHLR Universal C-Shaped
Holder has 90° of vertical to horizontal
positioning range. The 360° rotatable
chuck can hold a wire through the chuck
that has a diameter of .010” to .170”.
The LPI-UVCHLR can also hold an item
as large as 1” diameter in the chuck. The
LPI-UVCHLB base has the ability to
rotate 360° for optimal viewing.
The LPI-UVHLB Universal Holder has a 360° rotatable
chuck that can hold a .010” to .170” diameter wire
horizontally through the chuck. The LPI-UVHLB can
also hold an item as large as 1” diameter in the chuck.
LPI-UVHLB
Order Product Number
LPI-UVCHLR Universal C-Shaped Holder
LPI-UVHLB Universal Holder, large bore
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
A-4
ACCESSORIES
LEEDS Products
Anti-Vibration Pad
The LPI-EAR.25 Anti-vibration pad can be placed under a fiber optic light source to
prevent the fiber optic light source from transferring vibrations to both the imaging
table and the microscope.
This item can be custom cut to order. Please contact Leeds Technical Sales
Representative to discuss customization options.
Order Product Number
LPI-EAR.25
1/4” x 13 1/2” x 15” Anti-vibration pad
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
A-5
LEEDS Products
ERGONOMIC PRODUCTS
Ergo Head Riser
The LMS-EHR2 Ergo head riser shown
with binocular and stereo scope mounted on the LMS-340LED brightfield/
darkfield base.
The LMS-EHR2 Ergo head riser shown in midrange lowering position.
Order Product Number
The LMS-EHR2 provides up to 4” of
additional eyepiece height.
LMS-EHR2
LMS-340LED
LPI-S-0204
LMS-SZX-R
Ergo head riser
BF/DF transillumination LED base
400mm pillar
Drop prevention collar
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
A-6
MOUNTS
Leeds Products
MOUNTS
Inclination Joint for Bonder Focus
Mount
LMA-058
Unlike the stock Olympus S-02662 and S-0266 focus
mounts, which drops into the post mount of the boom
arm, the modified Leeds’ LMA-058 inclination joint is
mounted from the underside of the boom arm and is
held securely in place with the provided drop
prevention knob. The LMA-058 inclination joint
enables the stereoscope to be held securely at an
angle which can be moved by the operator to various
tilted positions and will stay in position until manually
moved. Tension of tilt movement can be adjusted or
locked with a hex wrench. This inclination joint
replaces the standard knuckle joint of the S-02662 and
S-0266.
Order Product Number
S-0266M shown
LMA-058
S-0266M
Inclination joint kit
Olympus bonder arm W/LLMA-058
installed
S-02662M
W/LLMA-058 Installed
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
M-1
Leeds Products
MOUNTS
Adjustable Mount the for the
AOL8520 to LMS-300
The LMS-300BIFO adjustable mount allows the AOL8520 Dual Gooseneck to be attached to the
LMS-300 Articulating Arm, allowing for better positioning of the light when using the LMS-300 arm.
The LMS-300BIFO can be mounted anywhere along the top, bottom or the end section of the LMS300 articulating arm.
LMS-300BIFO on an LMS300 Articulating Arm
LMS-300BIFO Mount
Order Product Number
LMS-300BIFO
Mount for A08520 to LMS-300
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
M-2
Leeds Products
MOUNTS
Retractable Arm
The Leeds LMS-350SZ and LMS-350SZX
retractable arms are designed to save work
space by extending and retracting the
microscope 14” from the back edge of the
work surface, as well as housing the cords
in the arm.
The LMS-350SZ and LMS-350SZX
retractable arm can be mounted to any
desktop surface using a C-clamp (2” max
desk thickness, 2 ¾ ” minimum overhang
needed for clamp).
Olympus SZX10 shown on the LMS-350SZX
Made of 14 gauge metal, the LMS-350SZ
and LMS-350SZX Retractable Arm can
support up to 88 lbs.
The LMS-350SZ Retractable Arm holds any
standard 5/8” Bonder Style Mount and
Focus arm, and the LMS-350SZX Extension
Arm holds a stereoscope and
focusing unit.
Olympus SZ51 and S-02662
shown on the LMS-350SZ
Order Product Number
LMS-350SZ
Retractable Arm for the bonder mount
LMS-350SZX
Retractable Arm for the stereoscope
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
M-3
ERGONOMIC
VISION
SYSTEMS
Leeds Products
Ergonomic Vision System - Ergo V1
The Leeds’ Ergonomic Vision System - Ergo V1, is a fully
integrated video system incorporating a color video
camera, LCD monitor and mounting system into one
compact ergonomic inspection and assembly tool.
The Ergo V1 is designed for viewing and inspecting parts
and equipment, with an adjustable field of view and magnification range. Optional adjustment locks can be
incorporated to obtain fixed magnification.
Leeds’ ergonomic articulating arm and mounting
system maximizes work space utilization. A “C” clamp
table mounting system is standard with the Ergo V1. A
wide range of optional optics, lighting products and
mounting systems are available to
accommodate a variety of and applications.
A variety of lighting, lens and
mounting options are available to accommodate unique
application needs. Please
contact LEEDS for additional
configurations.
Leeds’ Ergonomic Vision System ERGO - V1 features:
• Color video camera, high resolution, or HD CCD camera options
• Color LCD monitor with high contrast and dynamic noise reduction
• Compact “C” clamp table mounting system standard
(Alternative space saving mounting systems are available)
• Articulating boom arm and drop collar
Ergo V1 Applications:
• Microscopy and life science
• Industrial manufacturing
• Inspection and measurement
Order Product Number
ERGOV1-11111
Ergo V1 system includes high
resolution color video cam era,
high resolution 25mm lens,
fixed position camera mount,
15” LCD color monitor and
Universal “C” clamp table
system mount.
STANDARD OPTICAL CONFIGURATION*
Working Distance Magnification at Monitor Field of View
1.8” (min)
15.2x (max)
.54” x .41”
4”
8.90x
.92” x .70”
6”
6.37x
1.30” x .94”
8”
5.0x
1.64” x 1.24”
10”
4.0x
2.06” x 1.54”
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
E-1
Leeds Products
Ergonomic Vision System - Ergo V2
The Leeds’ Ergonomic Vision System - ERGO V2 is a high definition system with superior image quality and high
resolution zoom optics for the most demanding applications.
The ERGO V2 standard model includes a high resolution color
1/3” CCD video camera with articulated boom arm and drop collar, standard fixed zoom lens mounting system and a 15” HD flat
screen LCD color monitor. Leeds’ ERGO V2 system also includes
an adjustable bonder arm allowing for camera rotation and tilt. A
“C” clamp table mounting system is standard with the ERGO V2.
A wide range of optional optics, lighting products and mounting
systems are available to accommodate a variety of applications.
Leeds’ Ergonomic Vision System ERGO - V2 features:
• Color video camera, high resolution, or HD CCD camera options
• HD flat screen LCD color monitor
• Compact “C” clamp table mounting system standard
(Ergo V2 image displays optional weighted base stand)
• Articulating boom arm and drop collar
• High resolution zoom optics for the most demanding applications
ZOOM LENS
Ergo V2 Applications:
• Microscopy and life science
• Industrial manufacturing
• Inspection and measurement
Working Distance
Front Lens
Field of View (mm)
14.02”
.25x
51.12 - 8.04
6.89”
.5x*
25.56 - 4.0
3.26”
1x
12.77 - 2.01
2.01”
1.5x
8.52 - 1.33
Order Product Number
ERGOV2-12211
Ergo V2 system includes high resolution color
video camera, high magnification optical zoom
lens, manual course focus bonder arm camera
mount, 15” LCD color monitor, Universal “C”
clamp table mounting system.
A variety of lighting, lens and
mounting options are available to accommodate unique
application needs. Please
contact LEEDS for additional
configurations.
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
E-2
Leeds Products
Ergonomic Vision System - Ergo V3
Leeds’ ERGO V3 offers multiple options for customized alignment, measurement and analysis:
• Various CCD GigE camera options with 30fps full resolution live view
available
• A wide variety of optical and base mounting systems to fit numerous
applications
• Easily load custom job specific reticle overlays for alignment and
measurement
• Intuitive software for manual measurement, annotation, and image
capture
• Auto-exposure, gain & white balance
09/27/2011
Leeds Precision Instruments, Inc.
SN8867589
Pass/Fail: Pass
Length
7.172 mm
Circle
a: 1.903 sq. mm
r: 0.778 mm
d: 1.557 mm
Length
58.419 mm
Circle
a: 167.922 sq.mm
r: 7.311 mm
d: 14.622 mm
Circle
a: 2.253 sq. mm
r: 0.847 mm
d: 1.694 mm
Order Product Number
LPI-ERGO-S2
Software for Ergo V3 system
Ergo V2 Applications:
• Microscopy and life science
• Industrial manufacturing
• Inspection and measurement
Ergo V3 System Configurations:
• All-in-one touch screen
• Standard attached monitor and PC
• Column mounted laptop system
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
E-3
TABLES
LEEDS Tables
Dual-View & Quad-View Tables
Dual-View - Head to Head
Four Position Observation
Microscope Setup
Dual-View - Side to Side
All tables are manufactured with the following specifications:
• 26" x 42" table size with a 28 ¾" work surface height.
• Wilsonart 4168-60-390 Gray Pampus color - chemical safe work surface.
• Charcoal color rubber T-edge around outside of table edge.
• 1 ¼" Laminated wood core with smooth masonry backer board on bottom.
• Oxford color, tubular steel leg supports.
• ¼-20 thread inserts in bottom of table top for mounting legs.
Leeds Custom Table Items Required
Qty Part Number
Description
1
LBX-02HTBL-1
26x42 Dual View scope table
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
X-1
LEEDS Tables
Five & Six Position Observation
Microscope Tables
LBX-05HTBL-H
Both tables are manufactured with the following specifications:
• 22" x 72" table size with a 28 ¾" work surface height.
• Wilsonart 4168-60-390 Gray Pampus color, chemical safe work surface.
• Charcoal color rubber T-edge around outside of table edge.
• 1 ¼" Laminated wood core with smooth masonry backer board on bottom.
• 1" square tube for additional support through center length of the table.
• Oxford color, tubular steel leg supports.
• ¼-20 thread inserts in bottom of table top for mounting legs.
Leeds Custom Table Items Required
Qty Part Number
Description
1
LBX-05HTBL-H
Microscope table H Design
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
X-2
LEEDS Tables
Ten Position Observation
Microscope Setup - H-Layout
LBX-10HTBL-H
48" x 72" Table
42" Twin-Legs
60" Cross Support
Member
•
•
•
•
•
•
•
48" x 72" table size with a 28 ¾" work surface height.
Wilsonart 4168-60-390 Gray Pampus color, chemical safe work surface.
Charcoal color rubber T-edge around outside of table edge.
1 ¼" Laminated wood core with smooth masonry backer board on bottom.
1" square tube for additional support through center length of the table.
Oxford color, tubular steel leg supports.
¼-20 thread inserts in bottom of table top for mounting legs.
Leeds
Qty
1
1
Custom Table Items Required
Part Number
Description
LBX-10HTBL-H
10 Headed Microscope Table H Design
Crating
Leeds Shipping Crate for Table
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
X-3
LEEDS Tables
Ten Position Observation
Microscope Setup - Straight Layout
LBX-10HTBL-B2
30" x 94" Table
20" T-Legs
4" Single Post Leg
60" Cross Support Member
•
•
•
•
•
•
•
30" x 94" table size with a 28 ¾" work surface height.
Wilsonart 4168-60-390 Gray Pampus color, chemical safe work surface.
Charcoal color rubber T-edge around outside of table edge.
1 ¼" Laminated wood core with smooth masonry backer board on bottom.
1" square tube for additional support through center length of the table.
Oxford color, tubular steel leg supports.
¼-20 thread inserts in bottom of table top for mounting legs.
Olympus Observation Tubes and Leeds Custom Items Required
Qty Part Number
Description
1
LBX-10HTBL-B2
10 position Microscope Table, Straight design
2
LBX-B-0151
Telescope Support Base
2
LBX-153
Support Bracket
1
Crating
Leeds Shipping Crate for Table
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
X-4
LEEDS Tables
Optional LBX-18HTBL-AR
arm rest
Installed LBX-18HTBL-AR
arm rest
LBX-18HTBL-2PCS
58" x 100" Table
22" T-Legs
4" Single Post Legs
•
•
•
•
•
•
•
•
58" x 100" table size with a 28 ¾" work surface height.
Wilsonart 4168-60-390 Gray Pampus color, chemical safe work surface.
Charcoal color rubber T-edge around outside of table edge.
1 ¼" Laminated wood core with smooth masonry backer board on bottom.
Steel plate for additional support through center of the table.
Oxford color, tubular steel leg supports.
Table ships in two pieces.
¼-20 thread inserts in bottom of table top for mounting legs.
Leeds
Qty
1
1
Custom Table Items Required
Part Number
Description
LBX-18HTBL-2PCS
18 Headed Microscope Table
Crating
Leeds Shipping Crate for Table
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
X-5
LEEDS Tables
26" x 38" Motorized Table
LCT-TBLB
The LCT-TBLB motorized table is designed to adjust to
various heights between 26" for a standard desk chair,
or 43" for adjustable stools.
Order Product Number
LCT-TBLB
26" x 38" Motorized Table
The Leeds Trace Evidence
Comparison Microscope on the
LCT-TBLB.
Leeds Products
Phone: 800-444-5333 • 763-546-8575
Fax: 763-546-4369
[email protected]
www.leedsmicro.com
X-6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement