GM Owner Manuals - GM Owner Center

GM Owner Manuals - GM Owner Center
2007 Chevrolet Equinox and Pontiac Torrent
Navigation System M
Overview ........................................................ 3
Overview .................................................. 4
Navigation Audio System ............................ 55
Navigation Audio System ........................ 56
Features and Controls ................................ 15
Features and Controls ............................ 16
Voice Recognition ....................................... 73
Voice Recognition ................................... 74
Index ............................................................ 79
1
The information in this manual supplements the
owner manual. This manual includes the latest
information available at the time it was printed. We
reserve the right to make changes in the product
after that time without notice. For vehicles first sold
in Canada, substitute the name General Motors
of Canada Limited for Chevrolet Motor Division or
Pontiac Division whenever it appears in this
manual.
Keep this manual with the owner manual in the
vehicle, so it will be there if it is needed. If
the vehicle is sold, leave this manual in the
vehicle.
GENERAL MOTORS, GM, the GM Emblem,
CHEVROLET, the CHEVROLET Emblem,
PONTIAC, the PONTIAC Emblem, and the names
EQUINOX and TORRENT are registered
trademarks of General Motors Corporation.
Litho in U.S.A.
Part No. 15910135 A First Printing
2
©
Canadian Owners
For Canadian owners that would like to obtain a
French language manual, see “Canadian Owners”
in the Index of your vehicle’s owner manual.
2006 General Motors Corporation. All Rights Reserved.
Section 1
Overview ......................................................... 4
Navigation System Overview ......................... 4
Overview
Getting Started .............................................. 6
Cleaning the Video Screen .......................... 14
3
Overview
Navigation System Overview
Screen shown with Map Disc Inserted
4
A. CD Slot. See CD Player on page 64 for more
information.
B. FULL MAP Touch Screen Button. See “NAV”
under “Hard Keys” under Using the Navigation
System on page 16 for more information.
C. No GPS Symbol. See Symbols on page 21 for
more information.
D. O (Power/Volume) Knob. See Navigation
Audio System on page 56 for more information.
E. North Up/Heading Up Symbol. See Symbols
on page 21 for more information.
F. NAV (Navigation) Key. See “Hard Keys” under
Using the Navigation System on page 16
for more information.
G. DEST (Destination) Key. See Destination on
page 28 for more information.
H. RPT (Repeat) Key. See “Hard Keys” under
Using the Navigation System on page 16
for more information.
I. FAV (Favorite) Key. See “Storing Radio Station
Presets” under Navigation Audio System on
page 56 for more information.
J. Map Scale. See “Map Scales” under Maps on
page 18 for more information.
K. 0 (Zoom In) Touch Screen Button. See “Map
Scales” under Maps on page 18 for more
information.
L. Mark Touch Screen Button. See “Adding
Destinations to the Address Book” under
Destination on page 28 for more information.
M. Source (AM, FM, XM, CD, etc.) Touch
Screen Button. See Navigation Audio System
on page 56 for more information.
N. Z (CD Eject) Key. See “Hard Keys” under
Using the Navigation System on page 16
for more information.
O. Auxiliary Jack. See Auxiliary Devices on
page 72 for more information.
P. Clock Touch Screen Button. See “Setting the
Time” under Configure Menu on page 44
for more information.
Q. Map DVD Slot. See “Installing the Map DVD”
under Maps on page 18 for more information.
R. f (Tune/Sound) Knob. See Navigation
Audio System on page 56 for more information.
S. AUDIO Key. See Navigation Audio System
on page 56 for more information.
5
T. MENU Key. See Configure Menu on page 44
for more information.
U. ¨ SEEK Key (Next). See Navigation Audio
System on page 56 for more information.
V. © SEEK Key (Previous). See Navigation Audio
System on page 56 for more information.
W. 1 (Zoom Out) Touch Screen Button. See “Map
Scales” under Maps on page 18 for more
information.
X. POI (Point of Interest) Touch Screen Button.
See “Displaying Points of Interest (POI) on the
Map Screen” under Symbols on page 21 for
more information.
Getting Started
Before you begin to operate the navigation
system, read this manual thoroughly to become
familiar with it and to understand how the
system works.
Keeping your mind on the drive is important
for safe driving. See “Defensive Driving” in the
Index of your vehicle’s owner manual for
more information.
6
Get familiar with your vehicle’s navigation system
so you can use it with less effort and take full
advantage of its features. Your navigation system
includes not only navigation, but also audio
functions. While your vehicle is parked:
• Familiarize yourself with all of its controls:
hard keys on the faceplate and touch-sensitive
screen buttons.
• Familiarize yourself with its operation.
• Set up your audio by presetting your favorite
stations, setting the tone, and adjusting the
speakers. Then, when driving conditions
permit, you can tune to your favorite stations
using the presets and steering wheel
controls, if the vehicle has them.
• Set up the navigation features that can only
be done before you begin driving, such as
entering an address or a preset destination.
Entering a destination or alphanumeric text
requires many steps, so you can only perform
these operations when the vehicle is in PARK (P).
You will notice that touch-sensitive screen
buttons leading to the alphanumeric keyboard are
dimmed out while driving.
Other functions may also be locked out while
driving and they too will appear grayed out on the
screen — but all functions are available when
parked. Some functions can be performed while
driving, as long as you can do so without diverting
too much of your attention from your driving.
{CAUTION:
This system provides you with a far greater
access to audio stations and song listings.
Giving extended attention to entertainment
tasks while driving can cause a crash and
you or others can be injured or killed.
Always keep your eyes on the road and
your mind on the drive — avoid engaging
in extended searching while driving.
{CAUTION:
Looking at the moving map on the
navigation screen frequently or for too
long while driving can cause a crash and
you or others can be injured or killed.
Keep your eyes and mind on the road and
avoid looking too long or too often at the
moving map on the navigation screen.
Use the voice guidance directions
whenever possible.
The navigation system allows you to do the
following:
• Plan a route with provided turn-by-turn route
and map guidance with voice prompts.
• Select a destination using various methods
and choices.
• Receive RDS broadcast announcements.
7
The information in the system may not always be
complete. Road conditions such as prohibited
turns, detours, and construction zones, change
frequently. It is important to consider whether you
can follow the directions given by the system
for the current conditions.
If OK is not selected, all hard keys except for
NAV (Navigation) and DEST (Destination) can
be accessed. Press the NAV hard key for
this Caution screen to appear. After reading the
Caution press OK to load the map DVD
information from the map disc.
When getting started you may set the navigation
system to your preference using various
options. To do so, reference the following topics:
Language — English/Metric Units
To change the language of the navigation screens,
see “Driver Information Center, DIC Vehicle
Customization” in the Index of your vehicle’s
owner manual.
Every fifty times the vehicle is started and the
navigation system is turned on, the Caution
screen will appear. If the Caution screen appears,
select OK to load the map DVD information.
8
To change the navigation screens from English
or metric, see “Driver Information Center, DIC
Controls and Displays” in the Index of your
vehicle’s owner manual.
Storing Radio Station Presets
Setting the Time
To set preset radio stations, do the following:
To set the time, do the following:
1. Press the MENU key to enter the configure
menu options, then press the MENU key
repeatedly until the time is selected or select
the time screen button.
2. Press the Hours and Minutes − (minus)
and + (plus) signs to decrease or to increase
the time.
1. Press the O(power) knob to turn the
system on.
2. Press the AUDIO hard key and select the
desired band (AM, FM1, FM2, XM1, or
XM2 (if equipped)).
3. Use the f (tune) knob or the SEEK arrows to
go to the desired station.
4. Press and hold one of the five preset screen
buttons, at the bottom of the screen, until you
hear a beep or see the station displayed
on the selected preset button.
5. Repeat the steps for each preset.
See “Setting the Time” under Configure Menu
on page 44 for more information.
See “Storing Radio Station Presets” under
Navigation Audio System on page 56 for more
information.
9
Entering an Address and Point of
Interest, and Storing Preset
Destinations
Entering an Address
To enter a destination by entering the city name
first, do the following:
1. Press the O(power) knob to turn the
system on.
2. Insert the DVD map disc. See “Installing the
Map DVD” under Maps on page 18 for more
information.
3. A caution may appear. Select the OK screen
button to proceed.
If the radio is already on with a map disc
inserted, press the DEST hard key.
4. Select the 2 Address Entry screen button.
5. Select the state/province screen button, if
needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
10
6. Select the City name button and start entering
the city name.
If five or less names are available, a list will
display. If more than five are available, the List
screen button will have a number in it that
represents the number of available cities.
Select this button to view the list and select
a city.
7. Once a city has been selected the Street
name category will automatically be selected
for entry.
Do not enter directional information or
street type. Use the space symbol screen
button ( U ) between street or city names.
For example, the street name N. Royal Oak
Rd. should be entered as royal U oak.
Use the backspace ( V ) screen button if an
incorrect character has been entered.
If five or less streets are available for the
selected city, the system will display the list of
streets. If more than five streets are available
the system will display the alpha keyboard.
8.
9.
10.
11.
Start entering the street name. If five or less
names are available, a list will display. If more
than five are available, the List screen
button will have a number in it that represents
the number of available streets. Select this
button to view the list and select a street.
Once a street has been selected, select the
House # screen button to enter the house
number. The system will display the house
number range that is available for the street.
Select the Go screen button. A map screen,
with the destination marked, will appear.
Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
Select the Start Guidance screen button.
You are now ready to start your route.
See “Address Entry ” under Destination on
page 28 for more information.
Entering a Point of Interest (POI)
To set a destination by entering a Point of
Interest (POI), do the following:
1. Press the O(power) knob to turn the
system on.
2. Insert the DVD map disc. See “Installing the
Map DVD” under Maps on page 18 for more
information.
3. A caution may appear. Select the OK screen
button to proceed.
If the radio is already on with a map disc
inserted, press the DEST hard key.
4. Select the i Point of Interest screen button.
5. Select the state/province screen button, if
needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
11
6. Enter the specific title of the POI in the POI
name space (i.e. Washington Monument).
If five or less names are available, a list will
display. If more than five are available, the
List screen button will have a number in it, it
represents the number of available POIs.
Select this button to view the list.
7. Select the Go screen button next to the POI.
A map screen, with the destination marked,
will appear.
8. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
9. Select the Start Guidance screen button.
You are now ready to start your route.
See “Point of Interest (POI)” under Destination
on page 28 for more information.
12
Storing Preset Destinations
1. Press the O(power) knob to turn the
system on.
2. Insert the DVD map disc. See “Installing the
Map DVD” under Maps on page 18 for more
information.
3. A caution may appear. Select the OK screen
button to proceed.
If the radio is already on with a map disc
inserted, press the DEST hard key.
Enter a destination. See Destination on
page 28 for more information on how to enter
a destination.
4. Select the Map screen button after entering
the destination.
5. Select the Mark screen button from the map
screen to add the current final destination as
a preset destination.
The address book screen will appear.
6. Select the Name screen button. An
alpha-keyboard will display. Enter the name.
7. Press and hold one of the screen buttons at
the bottom of the screen until the name
appears in the screen button on the display.
The name will appear in that preset destination
screen button and is now available to select
from the Destination Entry screen. See “Using
Your Stored Preset Destinations” next in
this section to select it as a destination.
See “Adding or Changing Preset Destinations”
under Destination on page 28 for more
information on how to add preset destinations.
Using Your Stored Preset Destinations
These destinations are available for selection
while driving.
1. Press the O(power) knob to turn the
system on.
2. Insert the DVD map disc. See “Installing the
Map DVD” under Maps on page 18 for more
information.
3. A caution may appear. Select the OK screen
button to proceed.
If the radio is already on with a map disc
inserted, press the DEST hard key.
4. Select one of the available preset destination
screen buttons. A map screen, with the
destination marked, will appear.
5. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
6. Select the Start Guidance screen button.
You are now ready to start your route.
See “Preset Destination” under Destination
on page 28 for more information.
13
Canceling Guidance
Guidance will be canceled once you arrive at your
final destination. To cancel guidance prior to
arrival at the final destination, do the following:
1. Press the DEST hard key.
2. Select the Cancel Guidance screen button.
3. A pop-up confirmation will appear. Select OK
to cancel guidance or Cancel to cancel the
request.
Guidance Volume
To adjust the volume of voice guidance prompts,
do the following:
1. Press the MENU hard key to enter the menu
options, then press the MENU key repeatedly
until Nav is selected or select the Nav
screen button.
2. Select the Voice Prompt screen button.
14
3. Select the On screen button if voice guidance
is not on.
4. Select the + (plus) or – (minus) screen
buttons to increase or to decrease the volume
of the voice prompts. The system will
respond with the adjusted voice level.
See “Voice Prompt ” under Configure Menu on
page 44 for more information.
Cleaning the Video Screen
When cleaning the video screen, use only a soft
clean cotton cloth dampened with clean water.
Section 2
Features and Controls
Features and Controls .................................. 16
Using the Navigation System ....................... 16
Maps ........................................................... 18
Symbols ...................................................... 21
Destination .................................................. 28
Configure Menu ........................................... 44
Global Positioning System (GPS) ................ 51
Vehicle Positioning ...................................... 52
Problems with Route Guidance ................... 53
If the System Needs Service ....................... 53
Ordering Map DVDs .................................... 54
Database Coverage Explanations ................ 54
15
Features and Controls
Using the Navigation System
This section presents basic information needed to
operate the navigation system.
Use the hard keys located on the navigation
system along with the available touch-sensitive
screen buttons on the navigation screen to operate
the system. See Navigation System Overview
on page 4 for more information.
Once the vehicle is moving, various functions will
be disabled to reduce driver distractions.
Hard Keys
The following hard keys are located on the
navigation system:
O (Power/Volume): Press this knob to turn the
system on and off. Turn the knob to increase
or decrease the volume to the audio system.
16
f (Tune/Speaker Adjustment): Press this knob
to access the Sound screen to adjust bass,
midrange, treble, and equalization. Turn the tune
knob to go to the next or previous radio station.
See Navigation Audio System on page 56 for more
information.
Z (CD Eject): Press the eject button to
eject CDs.
NAV (Navigation): Press this key to view your
vehicle’s current position on the map screen. Each
press of this key will cycle through Full Map and
the tab that displays the current audio source (AM,
FM, CD, etc.). Full Map displays the screen in
full map view. Selecting the audio tab will split the
screen between the map screen and the current
audio source screen menu. See “Audio” under
Navigation Audio System on page 56 for
more information.
DEST (Destination): Press this key to access the
Destination Entry screen to plan a destination.
See Destination on page 28 for more information.
RPT (Navigation Repeat): Press this key to
repeat the last voice guidance prompt.
FAV (Favorite): Press this key to access the
preset stations. See “Storing Radio Station
Presets” under Navigation Audio System on
page 56 for more information.
AUDIO: Press this key to access the full Audio
screen to change AM, FM, XM™ Satellite
Radio Service (if equipped), CD, and auxiliary
input. See “Audio” under Navigation Audio System
on page 56 for more information.
MENU: Press this key to adjust features for
sound, radio, navigation, the display, and for
adjusting the time. See Configure Menu on
page 44 for more information.
¨ SEEK / © SEEK: Press the seek arrows to
seek and scan radio stations and to seek tracks on
a CD. See Navigation Audio System on page 56
and CD Player on page 64 for more information.
Touch-Sensitive Screen Buttons
Touch-sensitive screen buttons, or screen buttons,
are located on the screen. When a screen
button has been selected, a beep will sound.
Screen buttons are highlighted when a feature is
available.
Alpha-Numeric Keyboard
Letters of the alphabet, symbols, punctuation, and
numbers, when available, will display on the
navigation screen as an alpha or numeric
keyboard. The alpha keyboard will display when
the system requires entry of a city or street name.
All characters are touch-sensitive screen
buttons. Touch a character to select it.
A-Y (Accent Alphabet): Select this screen button
to select letters with accent symbols. This button
may toggle to A-Z.
A-Z (Alphabet): Select this screen button to
select letters from the alphabet. This button may
toggle to A-Y.
17
0-9 (Numbers): Select this screen button to
select numbers.
Maps
U (Space): Select the space screen button to
This section includes basic information about the
map database.
enter a space between characters or the words
of a name.
Regional Maps
Backspace: Select the backspace screen button
if an incorrect character has been selected.
The maps are stored on a DVD. The United States,
Canada, and Puerto Rico are contained on
one disc.
To make name selections easier, the system will
only highlight the characters that can follow
the last one entered. For example, if a Z is
entered, a T may not be available for selection.
If a name does not display after entry, it may need
to be entered differently or the map DVD disc
may not contain that information. See Database
Coverage Explanations on page 54 for more
information.
18
If a regional map does not contain a specific city,
the map DVD may not contain the city or it
may have been misspelled when entered.
Refer to the Navigation System Map Disc manual
to view a detailed explanation of map coverage
and detailed city lists in each region. This manual
will be inside the map DVD case when the
vehicle is delivered from the factory.
Installing the DVD Map Disc
When your vehicle is delivered from the factory,
the dealer may have installed the map DVD. If the
map DVD was not installed, use the following
directions to load it:
Read the following steps completely before
operating this feature.
1. Turn the ignition on. Your vehicle must be in
PARK (P) to perform this operation.
2. Press the O (power) knob to turn the
navigation system on.
3. If it appears, touch the OK screen button to
agree that you have read the Caution screen.
4. Touch the Insert Map Disc screen button. The
screen will open to access the map DVD slot.
5. Load the map DVD partway into the slot. The
system will pull it in.
The screen cannot be closed until a double
beep is heard.
Notice: Pressing directly on the navigation
screen may cause damage. Repairs would not
be covered by your warranty. Do not press
directly on the navigation screen.
6. To close the screen, slightly push up on the two
outer corners until the screen is in position.
Then push the screen in by pushing on the four
outer corners until you hear a click.
Ejecting the DVD Map Disc
When the DVD map disc is not loaded, you will
not be able to use the navigation portion of
the system.
1. Press the MENU key to enter the Menu
options, then press the MENU key repeatedly
until Nav is selected or touch the Nav
screen button.
2. Touch the Map Database Information screen
button.
3. Touch the Eject Map Disc screen button. The
screen will tilt, exposing the map DVD slot.
19
4. Press the eject button, located next to the
DVD map disc slot, and the disc will eject.
Pull the disc out.
Notice: Pressing directly on the navigation
screen may cause damage. Repairs would not
be covered by your warranty. Do not press
directly on the navigation screen.
The screen cannot be closed until a double
beep is heard.
5. To close the screen, slightly push up on the
two outer corners until the screen is in position.
Then push the screen in by pushing on the
four outer corners until you hear a click.
Map Adjustments
The system allows you to adjust the scale of view
on the map. Also, as you drive, the map will scroll
automatically based on the direction of travel.
Map Scales
0 / 1 (Zoom In/Zoom Out): Touch the zoom in or
out screen buttons or the scale on the bar to
change the level of map detail. The scale will
appear on the screen once the zoom in or zoom out
screen buttons are selected. The system will adjust
the map accordingly. The scale of a map can range
from 1/32 mi. (50 m) to 256 mi. (400 km). To
change between English or metric, see “Driver
Information Center, DIC Controls and Displays” in
the Index of your vehicle’s owner manual.
Scrolling the Map
Touch anywhere on the
map screen and the
scroll symbol will
appear. Use this feature
to scroll across the map.
Move your finger in any direction on the map
screen and the map will continue to scroll in that
direction until you remove your finger.
20
If scrolling while your vehicle is in PARK (P), the
system will scroll initially at a slower rate. The
scroll speed will increase if you continue touching
the map screen.
If scrolling while your vehicle is in motion, there is
one scroll speed and a limited distance to
scroll. You have to keep touching the map screen
to scroll for a longer distance.
If you have used the scroll feature to scroll the
map and your vehicle icon becomes lost, press the
NAV (Navigation) key to return to the current
vehicle location on the map.
Use the scroll feature on the map to set a
destination. See “From Map” under Destination on
page 28 for more information.
When scrolling on the map without a planned route,
press the GO screen button to calculate the route
from your current position to the destination mark.
Symbols
The following symbols are the most common
symbols that will appear on a map screen.
Your vehicle is shown
as this symbol. It
indicates the current
position and the
direction your vehicle is
traveling on the map.
The destination symbol
will appear on the map,
after a route has
been planned, marking
the final destination.
21
The stopover symbol
will display on the map
after a stopover has
been added to the route.
The distance and time
to destination symbol
indicates the distance
and the estimated
time remaining to your
final destination,
depending on the option
selected.
The stopover symbols are numbered one through
three, depending on how many stopovers have
been set.
The distance to
destination symbol
indicates the distance to
the final destination.
The straight line to
distance symbol
indicates the
straight-line distance to
your destination.
This symbol only appears when the time to the
destination is not available or while you are
scrolling on the map.
This symbol will appear before you start driving on
the route or if you are on a road where navigation
guidance cannot be given.
22
The north up symbol
indicates the map with
North Up, known as
North Up mode.
While in North Up mode, the vehicle icon will
follow the north direction on the map regardless of
which direction the vehicle is traveling. Select
this screen symbol to switch between North Up,
Heading Up, and 3–D view modes.
The heading up symbol
indicates that the vehicle
is traveling up on the
map and is known as
Heading Up mode.
The shaded triangle indicates the North direction.
While in Heading Up mode the direction at the
top of the screen and the way the vehicle icon is
heading indicates the direction your vehicle is
traveling. Select this screen symbol to switch
between Heading Up, North Up, and 3–D view
modes.
Three-dimensional (3–D) view mode will change
the appearance of the map display to a road
level view.
23
The No GPS symbol will
appear when your
vehicle is not receiving
a Global Positioning
System (GPS) satellite
signal.
Displaying Points of Interest (POI) on the
Map Screen
Select the POI screen
button to display or
delete POI icons from
the map.
See Global Positioning System (GPS) on page 51
for more information.
Select the MARK screen
button to store the
location on the screen in
your address book.
The system will automatically store the point in the
address book. See “Adding Destinations to the
Address Book” under Destination on page 28 for
more information.
24
Displaying POI icons on the map lets you know
where POIs (e.g. restaurants, gas stations,
etc.) are located. This screen will appear after
selecting the POI screen button.
Select one of the POI categories to display or to
delete POI icons from the map screen. Once
a category has been selected the POI icon will
display at the top of the screen. Five categories
can be selected to display on the map screen.
When a category is selected those POI icons will
display on the map. Press the POI screen
button again to add more POI icons.
More: Select this screen button to view more POI
categories.
POI Close to: Once a category has been
selected, select this screen button to display the
list of available POIs for the selected POI
categories. The list provides the POI icon, the
name, the direction, and the distance to the POI
from your vehicles current position. Use the
scroll arrows to move up and down the list. Use
the sorting screen buttons: Dist (distance),
Icon, Name, and on Route as desired.
25
Go: Select this screen button, next to the desired
POI, to make this POI a destination or a stopover.
Select a POI name to receive information about
the POI. From this screen you can select: Address
Book, Go, or Map.
Address Book: Press this screen button to add
this POI to the address book. See “Nav” under
Configure Menu on page 44 for information
on editing address book entries.
Go: Select this screen button to make this POI a
destination or a stopover.
Map: Select this screen button to display the map
showing the location of the POI.
OK: Select this screen button to display the map
screen.
Show POI: Select this screen button to display or
remove the POI icons from the map screen.
List all Categories: Select this screen button to
list all POIs sorted alphabetically.
26
Delete: To delete a specific POI category, select
the category.
Clear All: Select this screen button to clear all
selected POI categories.
Driving on a Route
When a destination has been routed and you are
driving on route, the map screen will automatically
display the next maneuver.
The pop-up will display
the next maneuver
direction and how many
miles or kilometers
you are from it.
3–D Lane Guidance
When you are approximately 1/4 mi (400 m) from
the next maneuver, the screen will display the
name and a detailed view of the next maneuver.
Some major metropolitan areas may include a
3–D lane guidance feature for highway exits and
junctions. This feature gives you a more vivid
representation of the exits and junctions on your
route. Cities that include this feature are New York,
Los Angeles, Chicago, Detroit, and San Francisco,
and may also include Philadelphia, Washington
D.C., and other major highway junctions.
27
Dual Mode
Destination
This dual screen symbol
will display when the
screen is in dual mode.
Dual mode displays the route on half of the screen
and a maneuver or turn list on the other half.
Press this button to switch between dual screen
and full screen which displays the entire route.
Auto Reroute
When your destination is set and you are off the
planned route, the system will automatically plan a
new route and begin to reroute. The new route
will be highlighted on the screen.
28
Press the DEST key to access the Destination
Entry screen. From this screen, destination points
can be entered through one of five destination
entry options.
Address Entry
2 Address Entry: The address entry
destination method allows you to enter an address
by providing the system with a city name or a
street name.
To enter a destination by entering the city name
first, do the following:
1. Press the DEST hard key.
2. Select the 2 Address Entry screen button.
3. Select the state/province screen button, if
needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
4. Select the City name button.
5. Enter the City Name or select the Last 5 Cities
screen button.
The Last 5 Cities screen will display a list of
the last five city names that had been entered.
Select a city from the list and it will appear
in the City name area.
If using the alpha keyboard, finish entering the
city name. If five or less names are available,
a list will display. If more than five are
available, the List screen button will have a
number in it that represents the number
of available cities. Select this button to view
the list and select a city.
29
6. Once a city has been selected the Street
name category will automatically be selected
for entry.
Start entering the street name. If five or less
names are available, a list will display. If more
than five are available, the List screen
button will have a number in it that represents
the number of available streets. Select this
button to view the list.
7. Once a street has been selected, select the
House # screen button to enter the house
number. The system will display the house
number range that is available for the street.
8. Select the Go screen button. The map screen,
with the destination marked, will display.
9. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
10. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
30
To enter a destination by entering the street name
first, do the following:
1. Press the DEST hard key.
2. Select the 2 Address Entry screen button.
3. Select the state/province screen button, if
needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
4. Select the Street screen button and start
entering the street name or select the
Last 5 Streets screen button.
The Last 5 Streets screen will display a list of
the last five street names that had been
entered. Select a street from the list and it will
appear in the Street name area.
If using the alpha keyboard, finish entering the
street name. If five or less names are
available, a list will display. If more than five
are available, the List screen button will have a
number in it that represents the number of
available streets. Select this button to view the
list and select a street.
5. Once a street has been selected, select the
House # screen button to enter the house
number. The system will display the house
number range that is available for the street.
6. Select the Go screen button. The map screen,
with the destination marked, will display.
7. Once the house number is selected, the city
name will automatically populate. If there is
more than one city available for selection,
a list of cities will display. Select the city.
8. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
9. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
To enter a destination by entering a cross street,
do the following:
1. Press the DEST hard key.
3. Select the state/province screen button, if
needed, to change the current state or
province. Enter the name or enter the
two-letter abbreviation. A list will display or
select the List screen button and select
the state or province.
4. Select the City or Street screen button and
start entering the city or street name or
select the Last 5 Cities or Last 5 Streets
screen button.
The Last 5 Cities or Streets screen button will
display a list of the last five city or street
names that had been entered. Select a city or
street from the list and it will appear in the
City or Street name area.
If using the alpha keyboard, finish entering the
city or street name. If five or less names are
available, a list will display. If more than five are
available, the List screen button will have a
number in it that represents the number of
available cities or streets. Select this button to
view the list and select a city or street.
2. Select the 2 Address Entry screen button.
31
5. Once a city and a street have been selected,
select the Cross Street screen button and
start entering the cross street name. If five or
less names are available, a list will display.
If more than five are available, the List screen
button will have a number in it that represents
the number of available streets. Select this
button to view the list and select a street.
6. Select the Go screen button. The map screen,
with the destination marked, will display.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to select a destination from the POI list.
i Point of Interest: Select this screen button to
access the POI (Point of Interest) screen. From
this screen you have two options to select/enter a
destination. Either enter the name using the
alpha keyboard or select a category from the
category list.
32
To use the point of interest destination entry
method by entering the name, do the following:
1. Press the DEST hard key.
2. Select the i Point of Interest screen button.
3. Select the state/province screen button, if
needed, to change the current state or
province. Enter the name or enter the two-letter
abbreviation. A list will display or select the List
screen button and select the state or province.
4. Enter the POI name.
If five or less names are available, a list will
display. If more than five are available, the List
screen button will have a number in it that
represents the number of available POIs.
Select this button to view the list.
5. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
6. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
7. Select the Start Guidance screen button. You
are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
To use the point of interest destination entry
method by selecting a category, do the following:
1. Press the DEST hard key.
2. Select the i Point of Interest screen button.
3. Select the Browse POI Categories screen
button to view the list of POI categories.
4. Select a category, and then a sub-category.
The system will display available POI names in
the selected sub-category. Select the POI or
once the Browse POI Categories button is
selected, a List All Categories screen button will
display. Select this button to view a list of all
categories. Select one of the categories and a
list of all locations for the selected category for a
particular area will display. Select the location.
5. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
6. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
7. Select the Start Guidance screen button. You
are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
33
Address Book
The address book entry method allows you to
select a destination by selecting an address that
has been stored in your address book.
g Address Book: Select this screen button to
access the Address Book screen. From this screen
you can select an address that already exists as
the destination.
34
To use the address book entry method, do the
following:
1. Press the DEST hard key.
2. Select the g Address Book screen button.
A list of your address book addresses will
display.
3. Select the Go screen button next to the
destination. The map screen, with the
destination marked, will display.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
See “Adding Destinations to the Address
Book” later in this section.
Previous Destination
The previous destination entry method allows you
to select a destination from a list of previous
destination points.
/ Previous Destination: Select this screen
button to access the Previous Destination screen.
The system will store up to 20 points that have
been previously entered. As new destinations are
entered, the system will automatically delete
the oldest destinations and add the new
destinations.
To use the previous destination entry method, do
the following:
1. Press the DEST hard key.
2. Select the / Previous Destination screen
button.
3. Select a previous destination from the list.
Use the scroll arrows to the left to scroll
through the list.
4. Select the Go screen button next to the
destination. The map screen, with the
destination marked, will display.
5. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
6. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
35
From Map
This destination entry method allows you to select
a destination by scrolling on the map.
To use this destination entry method, do the
following:
1. Press the DEST hard key.
2. Select the ) From Map screen button. A map
screen will display with the scrolling symbol.
3. Use the 0 / 1 (zoom in/out) screen buttons
and touch on the map to find the area that
you would like to select as your destination.
Pressing, holding, and dragging your finger on
the map will activate fast scrolling.
) From Map: Select this screen button to enter
the from map destination entry method.
36
4. Touch once on the area that you would like to
set as your destination.
The map screen will display the address
information.
5. Select the Go screen button. The map screen,
with the destination marked, will display.
6. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
7. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
Map Coordinates
The coordinates destination entry method allows
you to select a destination by entering latitude and
longitude coordinates.
Map Coordinates: Select this screen button to
access the Coordinates Entry screen.
To use the coordinates destination entry method,
do the following:
1. Press the DEST hard key.
2. Select the From Map screen button.
3. Select the Map Coordinates screen button.
4. Select Latitude and select either N (north) or
S (south) to enter the direction of the latitude
coordinate. Enter the numeric portion of
the latitude coordinate.
5. Select Longitude and select either E (east) or
W (west) next to enter the direction of the
longitude coordinate. Enter the numeric
portion of the longitude coordinate.
6. Once both coordinates are entered, select the
Go screen button. The map screen, with the
destination marked, will display.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
37
Preset Destination
The preset destination entry method allows you to
set a destination by selecting from one of five
previously stored destinations. Besides voice
tagged destinations, these are the only
destinations available to set while the vehicle is
moving. If a destination is not set for one of
the screen buttons, the button will be dim and not
be available for use. See “Adding or Changing
Preset Destinations” later in this section for
information on how to add a preset destination.
38
To use the preset destination entry method, do the
following:
1. Press the DEST hard key.
2. Select the desired preset destination screen
button. The screen buttons are labeled with
the name that was selected for the destination
when it was stored. The map screen, with
the destination marked, will display.
3. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
4. Select the Start Guidance screen button.
You are now ready to start your route.
See “Getting Started on Your Route” later in
this section for more information.
Getting Started on Your Route
Turn List
Once you have entered a destination there are
several functions that can be performed. Press the
DEST hard key to access the Route screen.
Turn List: Select this screen button to view the
list of turn maneuvers for the entire route and
to avoid turns on the route.
r / q (Scroll Arrows): Select the up and
down arrow screen buttons to scroll through the
list of maneuvers.
Avoid: Select this screen button, next to the
adjacent street name, to avoid the maneuver.
The map screen will display. The route will
re-calculate without that street.
39
r / [ (Fast Forward Scroll): Select this screen
button to scroll to the next stopover or to the
final destination. The u (fast forward skip) button
will change to a fast speed fast forward.
u (Fast Forward Skip): Select this screen
button to go to the next stopover or to the final
destination.
Detour
t (Reverse Skip): Select this screen button to
Detour: Select this screen button from the Route
screen, then select to detour 1 mile, 3 miles, or
5 miles (1 km, 3 km, 5 km) around the current
route. You may also select to detour the whole
route if necessary. This option is only available
while you are driving on your current planned
route.
go back to the start point or previous stopover.
Voice Volume
q / r (Reverse Scroll): Select this screen
button to scroll to the start point or previous
stopover. The t (reverse skip) button will change
to a fast reverse screen button.
Select this screen button from the Route screen to
turn voice guidance on or off and to change the
volume of voice prompts. See “Nav” under
Configure Menu on page 44 for more information.
Route Preview: Select this screen button to
preview the entire route in either direction.
j (Pause): Select this screen button to pause
the route preview, while in reverse or fast forward
scroll.
40
Add Stopover
Add Stopover: Select this screen button from the
Route screen. This feature allows you to add up
to three stopovers to the current route, between
your start point and final destination. Once a
stopover has been added, the points can be edited
or deleted.
To add a stopover:
1. Press the DEST hard key.
2. Select the Add or Add Stopover screen
button. This button will only appear if a
route has been calculated.
3. Using the desired method of entering a
destination, enter the stopover. See
“Destination” previously for more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
6. To add the second and third stopovers, press
the DEST hard key, then select the Add
screen button, where you would like the next
stopover to fall on the route.
7. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
8. Select the Start Guidance screen button.
You are now ready to start your route.
41
To delete a stopover from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for a stopover
to be deleted.
3. The system will display a pop-up confirmation
message. Select OK to delete the stopover;
select Cancel to cancel this operation.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and
highlight the route.
5. Select the Start Guidance screen button.
You are now ready to start your route.
Adding Destinations to the
Address Book
Suspend Guidance
There are two ways to add a destination to the
address book:
• To add the current final destination to the
address book, select the Mark screen
button from the map screen. The system will
automatically save the final destination
information in the address book.
• Select the Add to Address Book screen button
when available on POI information screens,
Destination Entry screens, or POI screens.
The system will automatically save this
information in the address book.
Select this screen button, from the Route screen,
to put the current route on hold.
See “Nav” under Configure Menu on page 44 for
information on editing address book entries.
Resume Guidance
Select this screen button, from the Route screen,
to resume guidance on the current route.
Cancel Guidance
Select this screen button, from the Route screen,
to cancel the current route.
42
Adding or Changing Preset
Destinations
This feature allows you to add or change one of
five preset destinations. When a destination
has been added as a preset destination, it will be
available to select from the Destination Entry
screen. See “Preset Destination” previously for
information on how to select a preset destination
as a final destination.
To store the current final destination as a preset
destination:
1. Select the Mark screen button from the map
screen to add the current final destination.
The Address Book screen will appear.
2. Select the Name screen button. An
alpha-keyboard will display. Enter the name.
3. Press and hold one of the buttons at
the bottom of the screen until the name
appears in that preset destination screen
button. It is now available to select from the
Destination Entry screen.
To store an address book entry as a preset
destination:
1. Press the MENU hard key then press the
MENU key repeatedly until Nav is selected
or select the Nav screen button.
2. Select the Edit/View screen button.
3. Select the address book entry that you would
like to store as the preset destination. Select
the Name screen button to add a name, if
needed.
4. Press and hold one of the buttons at the
bottom of the screen until the name appears
in that preset destination screen button. It
is now available to select from the Destination
Entry screen.
43
Configure Menu
Sound
Press the MENU key to enter the menu options
then press the MENU key repeatedly until Sound is
selected or select the Sound screen button, to
make speaker and equalization adjustments. See
Navigation Audio System on page 56 for more
information.
Radio
Press the MENU hard key to adjust several of the
system’s features and preferences. The last
selected menu screen will be the screen that
displays; Sound, Radio, Nav (navigation), Display,
or Time.
44
Press the MENU key to enter the menu options
then press the MENU key repeatedly until Radio is
selected or select the Radio screen button, to
make changes for radio information displayed,
preset pages, XM™ categories, and automatic
volume control. See Navigation Audio System
on page 56 for more information.
Nav (Navigation)
Volume: Select the + (plus) or − (minus) screen
buttons to increase or to decrease the volume of
the voice prompts. The system will respond with the
adjusted voice level.
Voice Guidance: Select the On or Off screen
buttons to turn voice instructions on and off while
traveling on a planned route.
Route Preference
Select the Route Preference screen button to
change route options when the system calculates
a route.
Allow Major Roads: Major roads will be used
when calculating a planned route.
Press the MENU key to enter the menu options,
then press the MENU key repeatedly until
Nav is selected or select the Nav screen button.
Allow toll road: Toll roads will be used when
calculating a planned route.
Voice Prompt
Allow ferry: Ferries will be used when calculating
a planned route.
Voice Prompt: Select the Voice Prompt screen
button to change the volume of the voice prompts
or to turn voice guidance on and off.
Allow time and seasonal restricted road:
Time restricted and seasonal roads will be used
when calculating a planned route.
45
Edit Address Book — How to Add
To add an address to the address book, see
“Adding Destinations to the Address Book” under
Destination on page 28.
Edit Address Book — Edit/View
To edit the name of an address book:
1. Press the MENU key then press the MENU
key repeatedly until Nav is selected or select
the Nav screen button.
2. Select the Edit/View Address Book screen
button.
3. Select the Address book entry.
4. Select the Name screen button and use the
alpha keyboard to edit or add the name.
5. Select the OK screen button to save your
changes.
To add or change the phone number of an
address book entry:
1. Press the MENU key then press the MENU
key repeatedly until Nav is selected or select
the Nav screen button.
2. Select the Edit/View Address Book screen
button.
3. Select the address book entry to change.
46
4. Select the Phone # screen button and use the
numeric keyboard to enter or change the
phone number.
5. Select the OK screen button to save your
changes.
To change the map icon of an address book entry:
1. Press the MENU key then press the MENU
key repeatedly until Nav is selected or select
the Nav screen button.
2. Select the Edit/View Address Book screen
button.
3. Select the address book entry to change.
4. Select the Icon screen button.
5. Select an icon from the list.
To add a voice tag to an address book entry:
1. Press the MENU key then press the MENU
key repeatedly until Nav is selected or select
the Nav screen button.
2. Select the Edit/View Address Book screen
button.
3. Select the Add Voice Tag screen button.
4. The system will ask for you to state the name.
You will have four seconds to state the name.
The system will repeat the name.
To delete an address book entry:
1. Press the MENU key then press the MENU
key repeatedly until Nav is selected or select
the Nav screen button.
2. Select the Edit/View Address Book screen
button.
3. Select the address book entry to delete.
4. Select the Delete screen button to delete the
address book entry.
5. A confirmation pop-up will display. Select Ok
to delete; select No to cancel the operation.
To delete the entire address book:
1. Press the MENU key then press the MENU
key repeatedly until Nav is selected or select
the Nav screen button.
2. Select the Edit/View Address Book screen
button.
3. A list of all the address book entries will
display. Press and hold the Clear All
screen button.
4. A confirmation pop-up will display. Select Ok
to delete; select No to cancel the operation.
47
Map Database Information
Eject Map Disc: Select this screen button to eject
or to change the map DVD. The screen will
open, exposing the map DVD slot. Press the eject
button, next to the map DVD slot, to eject the
disc. Pull the map DVD out.
The screen can not be closed until you hear a
double beep.
Notice: Pressing directly on the navigation
screen may cause damage. Repairs would not
be covered by your warranty. Do not press
directly on the navigation screen.
Select the Map Database Information screen button
to view the coverage areas of the map DVD.
48
To close the screen, slightly push up on the
two outer corners until the screen is in position.
Then push the screen in by pushing on the
four outer corners until you hear a click. See Maps
on page 18 for more information.
Display
Brightness/Contrast/Mode
Press the MENU key to enter the menu options,
then press the MENU key repeatedly until Display
is selected or select the Display screen button.
Select this screen button to change the brightness,
contrast, and mode of the display.
Display Off
Select this screen button to turn the display off.
Press the Nav, Dest, Fav, or Menu hard key or
the f (tone) button to view the display.
49
] (Brightness): Select and hold the + (plus) or
− (minus) screen buttons to increase or decrease
the brightness of the screen.
Day: Select this screen button and the system will
make the screen background brighter.
Setting the Time
_ (Contrast): Select and hold the + (plus) or
Press the MENU key to enter the menu options,
then press the MENU key repeatedly until the time
is selected or select the time screen button.
Auto (Automatic): Select this screen button for
the system to automatically adjust the screen
background depending on exterior lighting
conditions.
Hours: Select and hold the − (minus) or + (plus)
signs to decrease or increase the hours.
− (minus) screen buttons to increase or decrease
the contrast of the screen.
Night: Select this screen button and the system
will make the screen background darker.
50
Minutes: Select and hold the − (minus) or + (plus)
signs to decrease or increase the minutes.
12/24 Format: Select the 12 screen button for
standard time; select the 24 screen button
for military time.
Global Positioning System (GPS)
The Navigation System determines the position of
your vehicle by using satellite signals, various
vehicle signals, and map data.
At times, other interferences such as the satellite
condition, road configuration, the condition of
the vehicle and/or other circumstances can
interfere with the Navigation’s ability to determine
the accurate position of the vehicle.
The GPS shows the current position of your
vehicle using signals sent by the GPS Satellites of
the United States Department of Defense.
When your vehicle is not receiving signals from
the satellites, a symbol will appear on the
map screen. Refer to Symbols on page 21.
This system may not be available or interference
may occur if the following happens:
• Signal obstructions caused by tall buildings,
large trucks, tunnels,
• objects located on top of the instrument panel,
• satellites will not send signals if they are
being repaired or improved,
• after-market glass tinting has been applied to
the vehicle’s windows.
Notice: Do not apply after-market glass tinting
to the vehicle’s windows. Glass tinting will
interfere with the system’s ability to receive
GPS signals and cause the system to
malfunction. You might have to replace the
window to correct the problem. This would not
be covered by your warranty.
For more information if you are experiencing a
problem, see If the System Needs Service
on page 53 and Problems with Route Guidance on
page 53.
51
Vehicle Positioning
At times, the position of the vehicle on the map
may be inaccurate due to one or more of the
following reasons:
• The road system has changed.
• The vehicle is driving on slippery road
surfaces such as in sand, gravel, and/or snow.
• The vehicle is traveling on winding roads.
• The vehicle is on a long straight road.
• The vehicle is approaching a tall building or a
large vehicle.
• The surface streets run parallel to a freeway.
• The vehicle has just been transferred by a
vehicle carrier or a ferry.
• The current position calibration is set
incorrectly.
• The vehicle is traveling at high speed.
52
• The vehicle changes directions more than
once, or when the vehicle is turning on a
turn table in a parking lot.
• The vehicle is entering and/or exiting a
parking lot, garage, or a lot with a roof.
• The GPS signal is not received.
•
•
•
•
•
•
•
•
A roof carrier is installed on your vehicle.
The vehicle is being driven with tire chains.
The tires are replaced.
The tire pressure for your tires is incorrect.
The tires are worn.
The first time the map DVD is inserted.
The battery is disconnected for several days.
The vehicle is driving in heavy traffic where
driving is at low speeds, and the vehicle is
stopped and started repeatedly.
If you experience problems with your system, see
your dealer.
Problems with Route Guidance
Inappropriate route guidance may occur under one
or more of the following conditions:
• You have not turned onto the road indicated.
• Route guidance may not be available
when using automatic rerouting for the next
right or left turn.
• The route may not be changed when using
automatic rerouting.
• There is no route guidance when turning at an
intersection.
• Plural names of places may be announced
occasionally.
• It may take a long time to operate automatic
rerouting during high-speed driving.
• Automatic rerouting may display a route
returning to the set stopover if you are heading
for a destination without passing through a
set stopover.
• The route prohibits the entry of a vehicle due
to a regulation by time or season or any
other regulation which may be given.
• Some routes may not be searched.
• The route to the destination may not be
shown if there are new roads, if roads
have recently changed, or if certain roads are
not listed on the map DVD. See Ordering
Map DVDs on page 54.
To recalibrate the vehicle’s position on the map,
see your dealer.
If the System Needs Service
If your system needs service and you have
followed the steps listed here and still are
experiencing problems, see your dealer for
assistance.
53
Ordering Map DVDs
You will receive two free DVD map disc updates
with the purchase of your new vehicle. Updates
are necessary to make sure that your vehicle’s
navigation system has the most accurate
information available about streets/roads, points of
interest, and business locations.
The updates are provided by the GM Nav Disc
Center at the first and second anniversary dates of
your vehicle’s delivery date. About four to six weeks
before those anniversary dates, you will receive a
post card from the GM Nav Disc Center reminding
you that a free update is available. The center will
request confirmation of your mailing address
either by having you contact the toll-free number,
1-877-NAV-DISC (1-877-628-3472), or the center’s
website, www.gmnavdisc.com. After verifying your
address you should receive the updated disc in
about two weeks. After receiving the updated disc,
replace the old disc in the navigation system. See
“Installing the DVD Map Disc” and “Ejecting the
DVD Map Disc” under Maps on page 18. Dispose of
the old disc to avoid confusion about which disc is
the most current.
54
If you have any questions about the operation of
the navigation system or the update process,
call the GM Nav Disc Center or go to the center’s
website. If you need any future updates or a
replacement disc, because the current disc is lost,
damaged, or needs to be updated, call the GM
Nav Disc Center or order a new disc online.
To order a disc, have your Vehicle Identification
Number (VIN) available. This helps the center
make sure you receive the correct and most up to
date DVD map disc for your vehicle. See
“Vehicle Identification Number (VIN)” in the Index
of your vehicle’s owner manual for more
information.
Database Coverage Explanations
Coverage areas vary with respect to the level of
map detail available for any given area. Some
areas will feature greater levels of detail than
others. If this happens, it does not mean there is a
problem with the system. As the map DVD is
updated, more detail may become available for
areas which previously had limited detail. See
Ordering Map DVDs on page 54.
Section 3
Navigation Audio System
Navigation Audio System ............................. 56
CD Player ................................................... 64
Auxiliary Devices ......................................... 72
55
Navigation Audio System
Playing the Radio
Notice: Before adding any sound equipment
to your vehicle, such as an audio system,
CD player, CB radio, mobile telephone,
or two-way radio, make sure that it can be
added by checking with your dealer. Also,
check federal rules covering mobile radio and
telephone units. If sound equipment can be
added, it is very important to do it properly.
Added sound equipment may interfere with the
operation of your vehicle’s engine, radio, or
other systems, and even damage them.
Your vehicle’s systems may interfere with the
operation of sound equipment that has
been added.
O (Power/Volume): Press this knob to turn the
Notice: The chime signals related to seat
belts, parking brake, and other functions of
your vehicle operate through the navigation
system. If that equipment is replaced or
additional equipment is added to your vehicle,
the chimes may not work. Make sure that
replacement or additional equipment is
compatible with your vehicle before installing
it. See “Accessories and Modifications” in
the Index of your vehicle’s owner manual.
56
audio system on and off. Turn the knob to increase
or to decrease the volume.
f (Tuning/Sound Knob): Turn this knob to go to
the next or previous frequency.
Press this knob to display the Sound menu. See
“Sound Menu” later in this section.
AUDIO: Press this key to display the audio
screen. Press the key to switch between AM, FM,
or XM, if equipped, DISC, or AUX (Auxiliary),
or select the screen button. See CD Player
on page 64 and Auxiliary Devices on page 72 for
more information.
Finding a Station
There are three ways to find/change stations:
• If viewing a full map screen, use the ¨
© SEEK keys and the f (tune) knob.
You cannot change preset stations from the
full map screen.
• If viewing a full map screen, select the source
screen (AM, FM, XM, CD, etc.) button. The
display will split between the audio screen and
the map screen. All station-changing functions
can be performed from this screen.
FM source shown, other sources similar
AM source shown, other sources similar
• If you do not want to view a split screen or
you are not on a map screen, press the
AUDIO hard key to enter the audio menu.
57
AM/FM/XM: Select the source (AM, FM, or XM, if
equipped) screen button or press the AUDIO key
repeatedly until the desired source is highlighted.
buttons to change categories. The station
information will appear on the display. See “Radio
Menu” later in this section to add and remove XM
categories from the category list. When listening to
XM stations, you will be able to select all of the
categories when using the right and left arrow
screen buttons on the main audio screen.
Categories cannot be selected from the category
list screen when they have been removed.
FM lists may also contain a category to select
if stations in your area support Radio Data
Systems (RDS).
2 Refresh List: Select this screen button to
refresh the list of stations.
FM source shown, other sources similar
Category: Select the screen button, located in the
middle of the screen, to receive a list of all of the
selected band stations in the area. Use the up and
down arrow screen buttons to scroll the
frequencies. Select the desired frequency.
XM lists will also contain a category to select and
the stations or channels that pertain to the category.
For XM, select the left and right arrow screen
58
When viewing a map screen, the name of the
station or channel will appear on the display.
¨ SEEK / © SEEK: To seek stations, press
the left or right arrow keys to go to the next
or previous station.
To scan stations, press and hold either arrow for
more than two seconds. The radio will go to a
station, play for a few seconds, then go on to the
next station. To stop scanning, press either
arrow again.
Storing Radio Station Presets
Sound Menu
This feature allows you to store up to 30 preset
stations. You can mix AM, FM, and XM (if
equipped). To store presets, do the following:
1. Press the O (power) knob to turn the
system on.
2. If viewing a map screen, select the source
screen button, press the AUDIO key, or
press the FAV (favorite) key.
3. Select the band.
4. Seek, scan, or tune to the desired station to
select the station.
5. Press and hold one of the preset screen
buttons for more than two seconds or until
you hear a beep.
6. Repeat the steps for each preset.
f (Sound): Press this knob or press the MENU
key to access the Sound menu to adjust the treble,
midrange, bass, fade, balance, and equalization.
Setting the Tone
TREBLE: Select the plus (+) or minus (−) sign to
increase or decrease the treble. If a station is
weak or noisy, decrease the treble.
59
MID (Midrange): Select the plus (+) or minus (−)
sign to increase or decrease the midrange.
Radio Menu
BASS: Select the plus (+) or minus (−) sign to
increase or decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance): To adjust the balance
between the left and the right speakers, select
and hold the L or R screen buttons.
Front/Rear (Fade): To adjust the fade between
the front and the rear speakers, select and
hold the Front or Rear screen buttons.
Automatic Equalization
The system has automatic equalization. With
automatic equalization, you can select customized
equalization settings designed for Rock, Pop,
Country, Classical, and Talk. Select one of
the screen buttons to hear the change in sound.
The system will save the setting for each source.
Custom: Press this screen button to manually
change the treble, midrange, bass, balance, and
fade without using the automatic equalization
setting.
60
Press the MENU key to enter the menu screen,
then press the MENU key repeatedly until Radio is
selected or select the Radio screen button to
make changes for radio information displayed,
number of preset pages, XM categories, and
automatic volume control.
Additional Information Displayed
Automatic Volume Control
Select the Additional Information Displayed screen
button to turn station, channel, CD, and MP3
information on or off. The information will display
when the screen button is highlighted.
Automatic Volume Control: With automatic
volume control, your audio system adjusts
automatically to make up for road and wind
noise as you drive.
When the screen button is highlighted the system
will display, when it is available, for the following;
FM: RDS category name and radio text, XM: Song
Title and Artist Name, CD: CD text, MP3: tag
information.
To use Automatic Volume Control:
Number of Preset Pages
Select the Number of Preset Pages screen button
to change the number of preset pages, 1 through 6.
Each preset page can contain five preset stations.
Select the desired numbered screen button.
1. Set the volume at the desired level.
2. Press the MENU key to enter the menu
screen, then press the MENU key repeatedly
until Radio is selected or touch the Radio
screen button
3. Press the Automatic Volume Control screen
button.
4. Touch the LOW, MEDIUM, or HIGH screen
buttons. Each higher setting allows for more
compensation at faster vehicle speeds.
Then, as you drive, automatic volume control
automatically increases the volume, as necessary,
to overcome noise at any speed. The volume
level should always sound the same to you as you
drive. To turn automatic volume control off,
touch the OFF screen button.
61
Remove/Add XM Categories
Select the Remove/Add XM Categories screen
button to remove or add XM categories when
selecting XM categories from the category
list screen. The list of XM categories will appear
on the screen. Use the up and down arrow screen
buttons to scroll through the list. The categories
to remove will be highlighted and the categories to
add will be dark in color. Select the category
that you would like to add or remove. Select the
Restore All Categories screen button to add
all categories that have been removed.
This system relies on receiving specific information
from these stations and will only work when the
information is available. In rare cases, a radio
station may broadcast incorrect information that will
cause the radio features to work improperly. If this
happens, contact the radio station.
The RDS system is always on. When information is
broadcast from the FM station you are listening to,
the station name or call letters will display on the
audio screen. RDS may provide a program type
(PTY) for current programming and the name of the
program being broadcast.
Radio Data System (RDS)
XM™ Satellite Radio Service
The audio system has a Radio Data System
(RDS). RDS features are available for use only on
FM stations that broadcast RDS information.
With RDS, the radio can do the following:
• Seek to stations broadcasting the selected
type of programming
• Receive announcements concerning local and
national emergencies
• Display messages from radio stations
XM™ is a satellite radio service that is based in the
48 contiguous United States and Canada. XM™
offers a large variety of coast-to-coast channels
including music, news, sports, talk, traffic/weather
(U.S. subscribers), and children’s programming.
XM™ provides digital quality audio and text
information that includes the channel name and
number, song title, and artist name. A service fee is
required in order to receive the XM™ service. For
more information, contact XM™; In the U.S. at
www.xmradio.com or call 1-800-852-XMXM (9696)
or in Canada at www.xmradio.ca or call
1-877-GET-XMSR (438-9677).
62
Radio Display Message
Condition
Action Required
XM Updating
Updating encryption code The encryption code in the receiver is being updated and no
action is required. This process should take no longer than
30 seconds.
No XM signal
Loss of signal
The system is functioning correctly, but the vehicle is in a
location that is blocking the XM™ signal. When you move
into an open area, the signal should return.
Loading XM
Acquiring channel audio
The audio system is acquiring and processing audio and
(after four second delay) text data. No action is needed. This message should
disappear shortly.
Channel Off Air
Channel not in service
This channel is not currently in service. Tune in to another
channel.
Channel Unavail
Channel no longer
This previously assigned channel is no longer assigned.
available
Tune to another station. If this station was one of the
presets, choose another station for that preset button.
No Artist Info
Artist Name/Feature not
No artist information is available at this time on this channel.
available
The system is working properly.
No Title Info
Song/Program Title not
No song title information is available at this time on this
available
channel. The system is working properly.
No CAT Info
Category Name not
No category information is available at this time on this
available
channel. The system is working properly.
Not Found
No channel available for
There are no channels available for the selected category.
the chosen category
The system is working properly.
No Information
No Text/Informational
No text or informational messages are available at this time
message available
on this channel. The system is working properly.
63
Radio Display Message
Condition
XM Theftlocked
Theft lock active
XM Radio ID
Unknown
Check XM Receiver
Action Required
The XM™ receiver in the vehicle may have previously been
in another vehicle. For security purposes, XM™ receivers
cannot be swapped between vehicles. If this message is
received after having your vehicle serviced, check with your
dealer.
Radio ID label (channel 0) If tuned to channel 0, this message will alternate with the
XM™ Radio eight digit radio ID label. This label is needed
to activate the service.
Radio ID not known
If this message is received when tuned to channel 0, there
(should only be if
may be a receiver fault. Consult with your dealer.
hardware failure)
Hardware failure
If this message does not clear within a short period of time,
the receiver may have a fault. Consult with your dealer.
CD Player
The player can be used for CDs and MP3s.
With the ignition on, insert a CD partway into the
slot, label side up. The player will pull it in and
the CD should begin playing. The navigation
system can be used while playing a CD.
When you insert a CD with the radio on, the
CD tab will display.
64
If you turn off the ignition or radio with a CD in the
player, it will stay in the player. When you turn
on the ignition or radio, the CD will start playing
where it stopped, if it was the last selected
audio source.
As each new track starts to play, the track number
will appear on the display.
The CD player can play the smaller 3 in (8 cm)
single CDs with an adapter ring. Full-size CDs and
the smaller CDs are loaded in the same manner.
If playing a CD-R the sound quality may be
reduced due to CD-R quality, the method of
recording, the quality of the music that has been
recorded, and the way the CD-R has been
handled. There may be an increase in skipping,
difficulty in finding tracks, and/or difficulty in loading
and ejecting. If these problems occur, check the
bottom surface of the CD. If the surface of the CD
is damaged, such as cracked, broken, or
scratched, the CD will not play properly. If the
surface of the CD is soiled, see “Care of
Your CDs” in the Index of your vehicle’s owner
manual.
If there is no apparent damage, try a known
good CD.
Notice: If you add any label to a CD, insert
more than one CD into the slot at a time,
or attempt to play scratched or damaged CDs,
you could damage the CD player. When
using the CD player, use only CDs in good
condition without any label, load one CD at a
time, and keep the CD player and the loading
slot free of foreign materials, liquids, and
debris.
Do not add any label to a CD, it could get caught
in the CD player. If a CD is recorded on a
personal computer and a description label is
needed, try labeling the top of the recorded CD
with a soft marker instead.
If an error appears on the display, see “CD
Messages” later in this section.
If viewing a map screen, touch the CD screen
button. The display will split between the audio
screen and the map screen. If you do not want to
view a split screen or you are not on a map
screen, press the AUDIO key, then press the
AUDIO key until CD is selected or touch the CD
screen button.
65
Playing an Audio CD
r (Rewind): Touch and hold this button to
rewind quickly through a track selection. You will
hear sound at a reduced volume. Release this
button to stop rewinding. The display will show the
elapsed time of the track.
[ (Forward): Touch and hold this button to fast
forward quickly through a track selection. You
will hear sound at a reduced volume. Release this
button to stop fast forwarding. The display will
show the elapsed time of the track.
j / r (Pause/Play): Touch this button to pause
the CD. This button will then change to the play
button. Touch the play button to play the CD.
Random: Touch this button to hear the tracks in
random, rather than sequential, order. Touch
Random again to turn off random play.
66
¨ SEEK / © SEEK: To seek tracks, press the
right arrow to go to the next track. Press the
left arrow to go to the start of the current track, if
more than eight seconds have played. If either
arrow is pressed more than once, the player
will continue moving backward or forward through
the CD. The sound will mute while seeking.
To scan tracks, press and hold the right arrow
until you hear a beep. The CD will go to the next
track, play for 10 seconds, then go on to the
next track. Touch either arrow to stop scanning.
The CD will mute while scanning.
Using an MP3 CD
• It is recommended that there is a maximum of
MP3 Format
192 files on a disc.
• The files can be recorded on a CD-R or
CD-RW with a maximum capacity of 700MB.
• DVD with MP3 are not playable on this
system.
There are guidelines that must be met, when
creating an MP3 disc. If the guidelines are not met
when recording a CD-R(W), the CD may not
play. The guidelines are:
• Sampling rate: 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, and 44.1 kHz.
• Bit rates supported: 32, 40, 48, 56, 64, 80, 96,
112, 128, 160, 192, 224, 256, and 320 kbps.
• ID3 tag information is displayed by the radio if
it is available. The radio supports ID3 tag
information v1.0 or v1.1. The radio will display
a filename, song name, artist name, album
name, and directory name.
• Maximum 32 characters, including spaces, in
a file or folder name.
• Maximum number of folders is 253 with a
maximum hierarchy of eight folders.
• Create a folder structure that makes it easy to
find songs while driving. Organize songs by
albums using one folder for each album. Each
folder or album should contain 18 songs
or less.
Root Directory
The root directory will be treated as a folder. If the
root directory has compressed audio files, the
directory will be displayed as ROOT. All files
contained directly under the root directory will be
accessed prior to any root directory folders.
However, playlists (Px) will always be accessed
before root folders or files.
Empty Directory or Folder
If a root directory or a folder exists somewhere in
the file structure that contains only folders/
subfolders and no compressed files directly
beneath them, the player will advance to the
next folder in the file structure that contains
compressed audio files and the empty folder will
not be displayed or numbered.
67
No Folder
When the CD contains only compressed files, the
files will be located under the root folder. The
next and previous folder functions will have
no function on a CD that was recorded without
folders or playlists. When displaying the name of
the folder the radio will display ROOT.
When the CD contains only playlists and
compressed audio files, but no folders, all files will
be located under the root folder. The left and
right arrow buttons will search playlists (Px) first
and then go to the root folder. When the radio
displays the name of the folder the radio will
display ROOT.
Order of Play
Tracks will be played in the following order:
• Play will begin from the first track in the first
playlist and will continue sequentially through
all tracks in each playlist. When the last
track of the last playlist has been played, play
will continue from the first track of the first
playlist.
68
• If the CD does not contain any playlists, then
play will begin from the first track under the
root directory. When all tracks from the
root directory have been played, play will
continue from files according to their numerical
listing. After playing the last track from the
last folder, play will begin again at the
first track of the first folder or root directory.
When play enters a new folder, the display will not
automatically show the new folder name. The
new track name will appear on the display.
File System and Naming
The song name that will display will be the song
name that is contained in the ID3 tag. If the
song name is not present in the ID3 tag, then the
radio will display the file name without the
extension (such as .mp3) as the track name.
Track names longer than 32 characters or four
pages will be shortened. The display will not show
parts of words on the last page of text and the
extension of the filename will not display.
Playing an MP3
With the ignition on, insert a CD partway into the
slot, label side up. The player will pull it in and
the CD should begin playing. While playing a CD,
the navigation system is available.
When you insert a CD with the radio on, the CD
tab will display.
If you turn off the ignition or radio with a CD in the
player, it will stay in the player. When you turn
on the ignition or radio, the CD will start playing
where it stopped, if it was the last selected
audio source.
As each new track starts to play, the track number
will appear on the display.
The CD player can play the smaller 3 in (8 cm)
single CDs with an adapter ring. Full-size CDs and
the smaller CDs are loaded in the same manner.
If playing a CD-R the sound quality may be
reduced due to CD-R quality, the method of
recording, the quality of the music that has been
recorded, and the way the CD-R has been
handled. There may be an increase in skipping,
difficulty in finding tracks, and/or difficulty in loading
and ejecting. If these problems occur, check the
bottom surface of the CD.
If the surface of the CD is damaged, such as
cracked, broken, or scratched, the CD will not play
properly. If the surface of the CD is soiled, see
“Care of Your CDs” in the Index of your vehicle’s
owner manual.
If there is no apparent damage, try a known
good CD.
Notice: If you add any label to a CD, insert
more than one CD into the slot at a time,
or attempt to play scratched or damaged CDs,
you could damage the CD player. When
using the CD player, use only CDs in good
condition without any label, load one CD at a
time, and keep the CD player and the loading
slot free of foreign materials, liquids, and
debris.
Do not add any label to a CD, it could get caught
in the CD player. If a CD is recorded on a
personal computer and a description label is
needed, try labeling the top of the recorded CD
with a soft marker instead.
If an error appears on the display, see “CD
Messages” later in this section.
69
If viewing a map screen, touch the CD screen
button. The display will split between the audio
screen and the map screen. If you do not want to
view a split screen or you are not on a map
screen, press the AUDIO key, then press the
AUDIO key until CD is selected or touch the CD
screen button.
Random: Touch this screen button to hear the
disc played in random (tracks and folders)
order. Touch the Random screen button to turn off
random play.
r (Rewind): Touch and hold this button to
rewind quickly through a track selection. You will
hear sound at a reduced volume. Release this
button to stop rewinding. The display will show the
elapsed time of the track.
[ (Forward): Touch and hold this button to fast
forward quickly through a track selection. You
will hear sound at a reduced volume. Release this
button to stop fast forwarding. The display will
show the elapsed time of the track.
qr (Folder/Artist/Album): Select the left or
right arrow to go to the previous or next folder,
artist, or album on the disc.
j / r (Pause/Play): Touch this button to pause
the CD. This button will then change to the play
button. Touch the play button to play the CD.
70
Press the middle screen button, with the folder,
artist, or album name, to sort the MP3 by
folder, artist, or album. It may take a few minutes
for the system to sort the MP3.
¨ SEEK / © SEEK: To seek tracks, press the
right arrow to go to the next track. Press the
left arrow to go to the start of the current track, if
more than eight seconds have played. If either
arrow is pressed more than once, the player
will continue moving backward or forward through
the CD. The sound will mute while seeking.
To scan tracks, press and hold the right arrow
until you hear a beep. The CD will go to the next
track, play for 10 seconds, then go on to the
next track. Touch either arrow to stop scanning.
The CD will mute while scanning.
CD Messages
If Disc Read Error appears on the display and/or
the CD comes out, it could be for one of the
following reasons:
• A disc was inserted with an invalid or unknown
format.
• The map DVD disc was installed into the CD
slot. See “Installing the Map DVD” under
Maps on page 18 for more information.
• It is very hot. When the temperature returns to
•
•
•
•
•
normal, the CD should play.
You are driving on a very rough road. When the
road becomes smoother, the CD should play.
The CD is dirty, scratched, wet, or
upside down.
The air is very humid. If so, wait about an hour
and try again.
There may have been a problem while burning
the CD.
The label may be caught in the CD player.
If the CD is not playing correctly, for any other
reason, try a known good CD.
If any error occurs repeatedly or if an error cannot
be corrected, contact your dealer.
71
Auxiliary Devices
The navigation system has an auxiliary input jack
located in the upper right corner of the faceplate.
This is not an audio output; do not plug the
headphone set into the front auxiliary input jack.
You can however, connect an external audio
device such as an iPod, laptop computer, MP3
player, CD changer, or cassette tape player, etc. to
the auxiliary input jack for use as another source
for audio listening.
Drivers are encouraged to set up any auxiliary
device while the vehicle is in PARK (P). See
“Defensive Driving” in the Index of your vehicles
owner manual for more information on driver
distraction.
72
To use a portable audio player, connect a
3.5 mm (1/8 in) cable to the auxiliary input jack.
When a device is connected, the system will detect
the device and automatically begin playing
audio from the device over the vehicle’s speakers.
If a device is connected and you are listening to
another source (FM, CD, etc.), press the
AUDIO key. Then press the AUDIO key repeatedly
until AUX (auxiliary) is selected; or touch the
AUX screen button. An auxiliary device must be
connected for the AUX screen button to appear as
a selectable option.
Section 4
Voice Recognition
Voice Recognition ........................................ 74
73
Voice Recognition
The navigation system’s voice recognition allows
for hands-free operation of the navigation
system, audio system, and OnStar® features.
Voice recognition can be used when the ignition is
on or when Retained Accessory Power (RAP) is
active. See “Retained Accessory Power (RAP)”
in the Index of your vehicle’s owner manual
for more information.
Helpful Hints for Stating Commands
• When a multiple command is available, choose
•
•
To use voice recognition, do the following:
1. Press the talk
symbol steering
wheel control
and release it when
you hear a beep.
The audio system,
if on, will mute.
2. Clearly state one of the commands listed on
the following pages.
74
•
•
the command that best works for you.
Words that are in brackets are optional.
For example, for the command
Radio [band] [select] FM, stating Radio FM
or Radio select FM are both valid commands.
When the system recognizes the command
the system will do one of the following:
− Perform the function.
− Ask you to confirm your choice.
− Issue an error message “Did not
recognize. Voice Recognition Canceled.”
If the system is not yet ready, the system
will display a message.
To cancel a command or if the system
response does not match your verbal
command, press and hold the talk
symbol button. The system will reply,
“Voice Recognition Canceled”.
• If you experience difficulty with the system
Voice tag Commands
recognizing a command, try saying it more
softly, and wait for a few seconds after
the beep, or you may just try saying it again.
• Background noise may cause voice
commands to be misunderstood, including
airflow noise from wind.
• To use the voice recognition system, the map
DVD must be loaded and the navigation
system must be on.
The following are voice tag commands you can
access by clearly stating the commands exactly as
they are written. You may have up to 40 voice tag
entries for destinations.
This system is able to recognize commands in three
different languages. The system will only recognize
commands based on the language selected from
the Driver Information Center (DIC). See “Driver
Information Center, DIC Vehicle Personalization”
in the Index of your vehicles owner manual.
Voice Recognition Commands
The following list shows all of the voice commands
available for the navigation system with a brief
description of each. The commands are listed with
the optional words in brackets. To use the voice
commands, refer to the instructions listed
previously.
Navigation go to [destination], navigation
select: These commands instruct the system to
select a destination saved under the voice tag
you have stored. The system will prompt you for
a destination name then wait for you to state
the name.
If you are not currently driving on a route, the
system will automatically create the voice
tag destination as the final destination. If you are
currently driving on a route, the system will
automatically create the voice tag destination as a
stopover. Up to three stopovers can be created.
Storing Voice Tags
From the address book entry information page,
press the Add Voice tag screen button. The
system will respond “Name Please?” and you
will have four seconds to record a name.
The system will ask for confirmation of the
name before saving it as a voice tag.
75
Navigation Help
Radio Commands
Navigation Help: This command instructs the
system to assist with navigation commands.
The following are radio commands you can
access by clearly stating the commands exactly
as they are written.
Display Commands
Use the following display commands to set the
display mode.
Display [set] day [mode]: Use this command to
set the display to daytime mode.
Display [set] night [mode]: Use this command
to set the display to night mode.
Display [set] auto [mode]: Use this command to
set the display to automatic mode. The system
will change between day and night mode
automatically.
System help: This command instructs the system
to assist with display commands.
76
Radio [band] [select] AM, radio [band] [select]
FM, radio [band] [select] XM, radio [band]
[select] satellite: These commands instruct the
system to go to either the AM, FM, or XM
(if equipped).
Radio [select] (frequency) AM, radio [select]
(frequency) FM: These commands instruct
the system to go to a specific frequency on
either AM or FM.
Radio [select] (channel) XM, radio [select]
(channel) satellite: These commands instruct the
system to go to a specific channel on the XM™
band (if equipped).
Radio help: This command instructs the system
to assist with radio commands.
CD Commands
Auxiliary Commands
The following are CD and MP3 commands that
can be accessed by clearly stating the commands
exactly as they are written.
The following auxiliary commands can be
accessed by clearly stating the commands exactly
as they are written. The commands are available
when the auxiliary source is available.
CD, Disc: Use this command to select a CD that
is currently loaded.
CD, Disc, [select] track (one, two, three, etc.):
This command instructs the system to select
a specific track number.
CD, Disc select next folder: Use this command
to select the next folder on the MP3.
CD, Disc select previous folder: Use this
command to select the previous folder on the MP3.
CD help, Disc help: This command instructs
the system to assist with CD commands.
Aux, Auxiliary: Use this command to select the
auxiliary device, when a device is connected.
OnStar® Command
OnStar: This command instructs the system to
connect to OnStar®. You will enter the OnStar®
voice recognition system. Refer to your OnStar®
owner guide for more information.
Voice Help
Voice help: This command will provide a
description of help commands that can be used.
77
✍ NOTES
78
A
Adding Destinations to the Address Book ......
Adding or Changing Preset Destinations ........
Alpha-Numeric Keyboard ...............................
Audio System ................................................
Auto Reroute .................................................
D
42
43
17
56
28
C
Canadian Owners ........................................... 2
Canceling Guidance ...................................... 14
CD
Player ........................................................ 64
CD Messages ............................................... 71
CD Player ..................................................... 64
Cleaning the Video Screen ............................ 14
Database Coverage Explanations ..................
Destination ....................................................
Display ..........................................................
Driving on a Route ........................................
54
28
49
26
E
Ejecting the DVD Map Disc ........................... 19
Entering an Address and Point of Interest,
and Storing Preset Destinations ................. 10
F
Finding a Station ........................................... 57
79
G
L
Getting Started, Navigation .............................. 6
Getting Started on Your Route ...................... 39
Global Positioning System (GPS) .................. 51
Guidance Volume .......................................... 14
Language — English/Metric Units .................... 8
H
M
Map Adjustments ........................................... 20
Map Scales ................................................... 20
Maps ............................................................ 18
Hard Keys ..................................................... 16
I
Installing the DVD Map Disc ......................... 19
80
N
Nav (Navigation) ........................................... 45
Navigation
Getting Started ............................................ 6
System Overview ......................................... 4
Using the System ...................................... 16
O
Ordering
Map DVDs ................................................. 54
Overview, Navigation System .......................... 4
Owners, Canadian .......................................... 2
P
Playing the Radio .......................................... 56
Problems with Route Guidance ..................... 53
R
Radio ..................................................... 44,
Radio Data System (RDS) ............................
Radio Menu ..................................................
Regional Maps ..............................................
56
62
60
18
S
Scrolling the Map ..........................................
Setting the Time ....................................... 9,
Sound ...........................................................
Sound Menu .................................................
Storing Radio Station Presets .................. 9,
Symbols ........................................................
System Needs Service, If ..............................
20
50
44
59
59
21
53
81
T
Touch-Sensitive Screen Buttons .................... 17
U
Using an MP3 CD ......................................... 67
Using Your Stored Preset Destinations .......... 13
V
Vehicle Positioning ........................................
Video Screen, Cleaning .................................
Voice Recognition ..........................................
Voice Recognition Commands .......................
52
14
74
75
X
XM™ Satellite Radio Service ........................ 62
82
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising