Sansui HDLCDVD190 Owner's Manual

Add to my manuals
68 Pages

advertisement

Sansui HDLCDVD190 Owner's Manual | Manualzz

OWNER’S MANUAL

19” TFT LCD DIGITAL TV WITH DVD PLAYER

HDLCDVD190

ATTENTION

If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.

TV/CABLE MODE SELECTION

When shipped from the factory, the Tuning Band option is set to the “Cable” (Cable Television) mode.

If not using CABLE, set this option to the “Air” position.

IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED

PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL

CUSTOMER SERVICE – 1-800-289-0980

ORION WEBSITE

FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT

www.orionsalesinc.com

Before operating the unit, please read this manual thoroughly.

2

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EX-

TENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE

FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment.

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE

READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN

FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE

MAINTENANCE, CONTACT AN AUTHORIZED SERVICE

LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE

PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM,

DO NOT TRY TO OPEN THE ENCLOSURE. RADIATION

MANY BE PRESENT WHEN THE ENCLOSURE IS OPENED.

DO NOT STARE INTO THE BEAM.

CERTIFICATION: COMPLIES WITH FDA

RADIATION PERFORMANCE STANDARDS,

21 CFR SUBCHAPTER J.

The lamp(s) within this product contain mercury.

Disposal should be in compliance with local, state or federal laws.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a clean dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician to replace the obsolete receptacle.

10) Protect the power cord from being walked on or pinched particularly at plug, and the point where it exits from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug damage, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such a vases, should not be placed on the apparatus.

16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

3

IMPORTANT SAFETY INSTRUCTIONS

(continued)

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD

IN WIRE

ELECTRIC SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC-NATIONAL ELECTRICAL CODE

S2898A

20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.

23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.

25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire.

26) When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.

27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. It may cause eye damage.

28) Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

29) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

CONDENSATION

Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired.

To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases, change the location of the player.

4

HOW TO HANDLE THE LCD PANEL

Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.

If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

SAFETY PRECAUTIONS

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.

10cm

Notes when mounting the LCD TV/DVD on a wall

• When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD

TV/DVD and the wall. Clearance of less than 6 cm (2 1/2 inches) will obstruct the vents and may cause the interior of the unit to overheat, resulting in damage to the unit.

• If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD TV/DVD.

IMPORTANT NOTICE

Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your

LCD Panel on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.

Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for these symptoms.

LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves. Some equipment placed too near this unit may cause interference.

Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.

5

6

Features

LCD color TV With DVD/CD player

Unique space saving design combines a 19” LCD color TV and a DVD/CD player.

A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a

DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.

The DVD PLAYER can play back both audio CDs and MP3/WMA/JPEG CDs.

Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Coaxial)

When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall.

Surround standard is different from Dolby Digital. This format is already in use in many theaters. By connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.

By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded in this format can be enjoyed.

The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.

Convenience Features

Direct selection of your desired scenes using Title/Chapter/Time/Track - You can play back from the desired scene.

Recalling Up to 3 Scenes (DVD only) - You can program up to 3 scenes in memory and recall the marked scenes.

Frame Advance - The PAUSE/STILL moves one frame at a time.

Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/7-1/2 times.

Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.

Program Playback (Audio CD/MP3/WMA CD) - You can play back tracks in programmed sequences.

Zoom (DVD only) - You can zoom in the selected subject on the screen during playback.

Note: Make sure that discs are suitable for the following functions.

Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back for movies or programs.

Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you can change the angles during playback.

Parental Control - You can limit the play back of scenes or sounds of DVD discs that have a rating level encoded on the disc.

Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.

TV Features

Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.

Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers.

Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.

Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120 minutes to turn off automatically.

On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for onscreen programming.

V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information. V-chip will allow you to set a restriction level.

* This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is prohibited.

*

is a trademark of DVD Format/Logo Licensing Corporation.

* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

* “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.

Contents

Before using your unit

IMPORTANT SAFETY INSTRUCTIONS ...........3

SAFETY PRECAUTIONS .................................5

IMPORTANT NOTICE .......................................5

Features ............................................................6

Contents ...........................................................7

Disc...................................................................8

Location of controls ...........................................9

Remote control ...............................................11

Power source ..................................................12

Antenna connections ......................................13

Cable TV connections .....................................14

TV operation

Setting the language .......................................15

Memorizing channels ......................................16

TV operation ...................................................19

Labeling channels ...........................................22

Setting the V-Chip ...........................................23

Closed Caption ...............................................27

CC advanced ..................................................28

Setting the picture size ....................................29

Adjusting the picture preference .....................31

Picture control adjustment ..............................31

DNR ................................................................32

Selecting the color temperature ......................32

Setting the 3D Y/C ...........................................33

Selecting Stereo/Second Audio Program

(SAP) ..............................................................34

Sound control adjustment ...............................34

Selecting the audio language ..........................35

Selecting the digital output ..............................35

Checking the Digital-signal strength ...............36

Resetting your settings ...................................36

Picture control adjustment in the Component and PC mode ..................................................37

Playback operation

Preparation .....................................................38

Status display of disc ......................................38

Playback procedure ........................................39

Special playback .............................................40

MP3/WMA/JPEG and Audio CD playback ......41

Setting the JPEG interval ................................43

Advanced function

Program playback (CD) ..................................44

Repeat playback (CD).....................................45

Random playback (CD) ..................................45

Zooming ..........................................................46

Locating desired scene ...................................46

Repeat playback .............................................47

Marking desired scenes ..................................48

Changing soundtrack language ......................49

Subtitles ..........................................................49

Changing angles .............................................50

Title selection ..................................................50

DVD menu ......................................................50

Additional information

Setting the language .......................................51

Setting the aspect ratio of TV screen ..............52

Setting on screen display ................................52

Setting the picture mode .................................53

Night Mode .....................................................54

Digital Out .......................................................54

Parental control setting ...................................55

Setting the new password ...............................56

Temporary disabling of rating level by

DVD disc .........................................................57

Language code list ..........................................58

Connections to other equipment .....................59

Reception disturbances ..................................62

Problems and troubleshooting ........................63

Specifications .................................................65

limited WARRANTY ........................................66

7

8

Disc

Playable discs

Disc type and logo mark

DVD Video

CD-DA content

The following discs are also available.

DVD-R/RW discs of DVD video format.

CD-R/RW discs of MP3/WMA/JPEG.

Audio

+

Video

(moving pictures)

Audio

CAUTION:

Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played.

8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.

If you insert an irregular shaped disc, it may get stuck and cause a malfunction.

The use of a ring protector or other disc accessories will cause errors.

This unit is to be used exclusively with the NTSC color system. PAL and SECAM system discs cannot be used with this unit.

Some CD-R/RWs and DVD-R/RW can not be played back depending on the recording conditions.

Region Number

Region number (Regional restriction code) is built-in to the unit and DVD video discs.

Region number “1” or “ALL” of DVD video discs can be used on this unit.

1

ALL

Title

When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a “TITLE”.

Chapter

The titles can be subdivided into many sections.

Each section is called a “CHAPTER”.

Track

An Audio CD can contain several items.

These are assigned to the tracks.

DVD DISC

TITLE 1

CHAPTER 1 CHAPTER 2 CHAPTER 1

TRACK 1 TRACK 2

TITLE 2

CHAPTER 2 CHAPTER 3

Audio - CD

TRACK 3 TRACK 4 TRACK 5

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.

Pick up the disc gently from the case.

Do not scratch the disc.

Do not get dirt on the surface of the disc.

Do not stick a label or adhesive tape on the disc.

Do not drop or bend the disc.

Storing Disc

Store the disc in the case to avoid risk of scratches, dirt or damage.

Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

Do not wipe the disc in a circular motion.

Do not use liquid or aerosol cleaners.

Location of controls

CHANNEL ▲/▼ buttons

VOLUME +/– buttons

MENU button

INPUT button

POWER button

Front

PLAY button SKIP button

STOP button EJECT button

Loudspeakers

POWER indicator

Remote sensor

To display the menu screen.

Press MENU button to display the menu screen.

CHANNEL ▲/▼ buttons and VOLUME +/– buttons can be used to select the desired setting during the menu screen operations.

9

Location of controls

Right side

DISC slot

(continued)

Rear

10

HEADPHONE jack

COMPONENT AUDIO IN jacks

COMPONENT IN jacks

PC AUDIO IN jack

PC IN jack

AV IN jacks

RF (ANT) IN jack

COAXIAL DIGITAL

AUDIO OUT jack

POWER

DISPLAY/–

TV/DVD

(EJECT)

0-9

VOL +/–

MUTE

SLEEP

SETUP

TV MENU

DVD MENU

CH /

▲▼◀▶

ENTER

EXIT

CANCEL

TOP MENU

SEARCH

PLAY

SKIP

SUBTITLE

STOP

SLOW

PAUSE/STILL

PLAY MODE

AUDIO

RETURN

Remote control

Power On/Off

Call TV information

Call DVD information

Input “–” for digital channels

Page

15, 19, 38, 39

20, 22, 34

38

19

Switch between TV/AV and DVD 15, 19, 38, 39

Eject a disc

Direct channel selection of TV

Input setting

Enter a password

Adjust volume of TV

Switch off the sound

39

19

46

23~26, 55~57

19, 20

20

Sleep timer 21

TV mode - Display menu of TV

15~18, 21~29, 31~37

DVD mode - Call up initial setup mode 43, 51~56

Display DVD menu

Select channel of TV

50

20

Cursor buttons

15~18, 21~29, 31~37, 39, 41~46, 48, 50~56

Enter information in the menu

15~19, 21~29, 31~37, 39, 41~48, 50~57

Exit from On-Screen menu

Reset information in the menu

Select title

46, 48, 55, 56

50

Fast Forward/Review playback

Playback

40

39~42, 44, 45, 47, 50

Skip chapter to forward or reverse direction 40, 45

Set subtitle

Stop

Forward/Reverse- slow motion

49

39, 41, 42

40

Pause CD sound

Still picture of DVD

Select playback mode

Change sound track language

Remove DVD setup menu

40

47

49

43, 51~55, 57

11

Remote control (continued)

Inserting Batteries

1

Open the battery compartment cover in the direction of the arrow.

2

Install two “AAA” batteries, paying attention to the polarity diagram in the battery compartment.

3

Replace the compartment cover.

Operation

Aim the remote control at the remote sensor and press control buttons to operate.

Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.

Approximately 15 feet

NOTE:

Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.

The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote sensor may shorten operating distance.

Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.

Do not mix old and new batteries.

Remove batteries if the remote control will not be operated for an extended period of time.

Power source

TO USE AC POWER

1.

2.

Connect the AC cord plug into this unit’s AC IN jack.

Connect the AC cord into an AC outlet.

Wider Hole and Blade

AC Outlet

AC 120V, 60Hz

AC cord (supplied)

12

NOTE:

Please make sure to insert the cord securely at both the LCD TV/DVD and the wall outlet.

The AC Cord has a grounding-type AC line plug. If the supplied AC cord does not match your AC outlet, contact a qualified electrician, do not defeat the purpose of a grounding plug.

WARNING:

DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC

CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD CAUSE

FIRE, ELECTRICAL SHOCK, OR DAMAGE.

CAUTION:

WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF

SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.

DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL

SHOCK.

IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS

RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-289-0980.

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 15 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

Antenna jack

Antenna jack

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

75 ohms coaxial cable

300-75 ohms matching transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna jack

300-75 ohms matching transformer

Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF

300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the

Antenna Jack.

Combiner

UHF 300 ohms

VHF 300 ohms

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna jack

Connect the VHF 75 ohm cable and UHF

300 ohm twin-lead wire to the Combiner (not supplied). Attach the Combiner to the Antenna

Jack.

VHF 75 ohms

Combiner

UHF 300 ohms

13

14

Cable TV connections

This TV/DVD has an extended tuning range and can tune most cable channels without using a

Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

Antenna jack

For basic Cable TV service not requiring a Converter/

Descrambler box, connect the 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV/DVD.

75 ohms coaxial cable

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

Incoming

75 ohm

Cable TV

Cable

Converter/

Descrambler

75 ohm Cable to TV/DVD

Antenna

Jack

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH

SCRAMBLED PREMIUM CHANNELS

If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to tune scrambled channels.

Incoming

75 ohm

Cable TV

Cable

Splitter

Converter/

Descrambler

A/B Switch

A

B

75 ohm Cable to TV/DVD

Antenna

Jack

You can choose from three different languages (English, French and

Spanish) for the on-screen displays.

Select the language you prefer first, then proceed with the other menu options.

Setting the language

1

To turn on the TV, press POWER.

(POWER indicator on the front of the unit blinks while starting.

It may take approx. 15 seconds for a picture to appear on screen.)

2

Press TV/DVD to select TV mode.

3

Press SETUP/TV MENU. The menu screen will appear.

4

Press ▲ or ▼ to select

“Setup” menu, then press

▶.

Picture

Tuning Band

DTV Signal

Auto Ch Search

Cable

Audio

Setup

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

English

Feature To Move Enter To Select Menu To Exit

5

Press ▲ or ▼ to select

“Menu Language”.

Cable

Picture

Audio

Setup

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

English

Feature To Move Enter To Select Menu

6

Press ▶ or ENTER to select the desired language: English

(ENGLISH), French (FRANÇAIS) or Spanish (ESPAÑOL).

7

Press SETUP/TV MENU to return to the normal screen.

To Exit

NOTE:

If no buttons are pressed for more than about 30 seconds, the MENU screen will return to normal operation automatically.

On this TV, there are setting menus for each external input. You can change the settings to fit your needs.

(Some settings are commoditized.

I.e., Audio settings, Parental control,

NTSC CC, ATSC CC and Digital

Closed Caption settings are applied to all external inputs.)

15

Memorizing channels

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Tuning Band menu option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.

Air/Cable selection

1

Press SETUP/TV MENU in the TV mode. The menu screen will appear.

2

Press ▲ or ▼ to select

“Setup” menu, then press

▶.

Picture

Tuning Band

DTV Signal

Auto Ch Search

Cable

Audio

Setup

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

English

Feature To Move

Enter To Select Menu To Exit

3

Press ▲ or ▼ to select

“Tuning Band”.

Picture

Audio

Setup

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

Cable

English

Feature To Move Enter To Select Menu To Exit

4

Press ▶ or ENTER to select “Air” or “Cable”.

Air

- VHF/UHF channels

Cable

- CABLE TV channels

Picture

Audio

Setup

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

Air

English

Feature To Move Enter To Select

5

Press SETUP/TV MENU to return to the normal screen.

Menu To Exit

CABLE CHART

The chart below is typical of many cable system channel allocations.

16

NOTE:

It may take a few seconds for a digital channel picture to appear on screen after being selected.

NOTE:

Memorizing channels is best accomplished during evening

“PRIMETIME” hours, as more stations are broadcasting digital signals.

Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.

If you are unsure of the digital channels available in your area, you may visit www.antennaweb.org to receive a list based on your address or zip code. Should you require further assistance you may call our toll-free customer service line at 1-800-289-

0980.

New digital channels may be added to your area periodically, it is recommended to perform the “Add On

Ch Search” procedure regularly.

Memorizing channels

Automatic channel search

1

Press SETUP/TV MENU in the TV mode. The menu screen will appear.

2

Press ▲ or ▼ to select

“Setup” menu, then press

▶.

Press ▲ or ▼ to select

“Auto Ch Search”.

Picture

Audio

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Cable

Channel Labels

Menu Language English

Setup

Reset

Feature To Move Enter To Select Menu To Exit

3

Press ▶ or ENTER. The

TV will begin memorizing all the channels available in your area.

Autoprogram Menu

Cable Channel 55

Analog Channels Found

Digital Channels Found

Progress (%) 39

Scanning

12

0

To Move

Enter

To Select Menu To Exit

It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels.

Depending on the reception condition, a BAR display may not advance for several minutes, please be patient.

Add on channel search

This feature searches only blank, unregistered channels.

1

Press SETUP/TV MENU in the TV mode. The menu screen will appear.

2

Press ▲ or ▼ to select

“Setup” menu, then press

▶.

Press ▲ or ▼ to select

“Add On Ch Search”.

Picture

Audio

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Cable

Channel Labels

English

Setup Menu Language

Reset

Feature To Move Enter To Select Menu To Exit

3

Press ▶ or ENTER. The

TV will begin searching only blank, unregistered channels.

Add On Autoprogram Menu

Cable Channel 44

Analog Channels Found

Digital Channels Found

Progress (%) 16

Scanning

1

0

To Move

Enter

To Select Menu To Exit

It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels.

Depending on the reception condition, a BAR display may not advance for several minutes, please be patient.

17

18

Memorizing channels

Manual Ch Set

You can select the channel that you want to skip.

1

Press SETUP/TV MENU in the TV mode. The menu screen will appear.

2

Press ▲ or ▼ to select

“Setup” menu, then press

▶.

Press ▲ or ▼ to select

“Manual Ch Set”, then press ▶ or ENTER.

Manual Ch Set menu will appear.

Picture

Audio

Setup

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

Cable

English

Feature To Move To Select

Enter

Menu To Exit

3

Press ▲ or ▼ to select the channel that you want to skip, then press

ENTER.

Manual Channel Set Menu

Ch 7-0

Ch 7-0

Ch 11-0

Ch 12-0

Viewable

Viewable

Viewable

Viewable

Ch 22-0

Ch 23-0

Viewable

Viewable

Ch 23-1 CH-1 Viewable

Ch 23-2 CH-2 Viewable

Ch 23-3 CH-3 Viewable

Ch 23-4 CH-4 Viewable

Ch 23-77 CH-77 Viewable

Ch 23-999 CH-999 Viewable

To Move

Enter

To Select Menu To Exit

4

Press SETUP/TV MENU to return to the normal screen.

NOTE:

If a channel with no broadcast is selected, the sound will automatically be muted.

It may take a few seconds for a digital channel picture to appear on screen after being selected.

Loud music can damage your hearing irreversibly, therefore do not set the volume to a high level when listening through headphones, particularly for extended listening periods.

TV operation

1

To turn on the TV, press POWER.

(POWER indicator on the front of the unit blinks while starting. It may take approx. 15 seconds for a picture to appear on screen.)

Press TV/DVD to select TV mode.

2

Adjust the volume level by pressing VOL + or .

The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars.

If the volume decreases, the number of white bars also decreases.

3

Set the Tuning Band option to the appropriate position (see page 16).

4

Press the Direct

Channel Selection

(0-9, –) buttons to select the channel, then press

ENTER. (If you press only channel number, channel selection will be delayed for a few seconds.)

Volume 14

Air - VHF/UHF channels

Cable - CABLE TV channels

Ch 9

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select channel 2, press 2.

10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2.

100-135: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the button, followed by the remaining number.

Example, to select channel 015-001, press 0, 1, 5,, 1.

If a channel is selected with only audio content, “Audio only” will be displayed on the screen.

If a channel is selected with a weak digital signal, “Digital channel signal strength is low” will be displayed on the screen.

If the digital channel has the same analog channel, you way be able to watch the same channel with analog.

If a channel is selected to which you have not subscribed,

“Digital channel is encrypted” will be displayed on the screen.

VHF/UHF/CABLE CHANNELS

Air

VHF

2-13

UHF

14-69

Cable

VHF

2-13

STD/HRC/IRC

14-36 (A)

37-59 (AA) (WW)

60-85 (AAA)

86-94

95-99

(86) (94)

(A-5) (A-1)

100-135 (100) (135)

01 (5A)

19

TV operation

To select the video input source

Press INPUT SELECT to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select ANT, Composite, S-Video, Component or PC depending on which input jacks you used to connect your devices.

CH

/

Press and release CH / . The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory. See pages 16 and 17 “Memorizing channels”.

Ch 9

DISPLAY

Press DISPLAY to display the current information on the screen.

When the TV receives a digital signal, the digital information will appear.

Channel number

Broadcast program name

Station name

Program guide

V-CHIP RATING

When the TV receives a analog signal, the analog information will appear.

Channel number or VIDEO mode selected

Channel label (if preset)

Stereo or SAP (second audio program) audio status

Content rating

Ch 15

Monscope_480i_1

720x480 I 30Hz TV-G

Monscope_480i_1_ABCDEFGHLIJKLMNOPQRST....

ABCDEFGHLIJKLMNOPQRSTUVWXYZabcdefghi....

Ch 12 ABCDEFG

No Program Information is Available

720x480 I 30Hz TV-14VSLD SAP

Press DISPLAY again to clear the call display.

QUICK VIEW

This button allows you to go back to the last channel selected by pressing QUICK VIEW. Press

QUICK VIEW again to return to the last channel you were watching.

Ch 8

20

NOTE:

The TV is capable of holding a still video image or On screen display image on your TV screen indefinitely.

If you leave the still video image or

On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your TV screen.

When the TV receives an analog signal, DISPLAY shows only analog information.

After 4 seconds, DISPLAY screen will return to normal TV-operation automatically.

MUTE

Press MUTE to switch off the sound.

The TV’s sound will be silenced and “Mute” will briefly appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or.

Mute

NOTE:

You can also set the sleep timer by pressing SLEEP on the remote control.

After the sleep time is programmed, the display will appear briefly 10 minutes and 5 minutes, 1 minute before to remind you that the sleep timer is operating.

To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds.

To cancel the sleep timer, press ▶ or

ENTER repeatedly to select “Off” in step 4.

TV operation

SLEEP

The sleep timer allows you to set a time when the LCD TV automatically switches to standby.

1

Press SETUP/TV MENU in the TV mode. The menu screen will appear.

2

Press ▲ or ▼ to select

“Feature” menu, then press ▶.

Picture

Sleep Timer

Advanced Video Menu

Off

Password Set

Audio

Setup

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Feature To Move

Enter To Select Menu To Exit

3

Press ▲ or ▼ to select

“Sleep Timer”.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

Feature To Move Enter To Select Menu To Exit

4

Press ▶ or ENTER repeatedly to select the desired sleep time (Off,

15 min, 30 min, 45 min,

60 min, 90 min, 120 min,

180 min or 240 min).

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

240 min

Off

Off

Feature To Move Enter To Select

5

Press SETUP/TV MENU to return to the normal screen.

Menu To Exit

21

Labeling channels

Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any seven characters to identify a channel.

To create channel labels

1

Press SETUP/TV MENU in the TV mode, then press ▲ or ▼ to select “Setup” menu, then press ▶.

2

Press ▲ or ▼ to select

“Channel Labels”, then press ▶ or ENTER.

The “Channel Labels” menu will appear.

Picture

Audio

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Cable

Channel Labels

English

Setup

Menu Language

Reset

Feature To Move Enter To Select Menu To Exit

3

Press ▲ or ▼ to select a channel you want to label.

4

Press ◀ or ▶ to enter a character in the first space.

Press ▲ or ▼ repeatedly until the character you want appears on the screen.

The characters rotation as follows:

Channel Labels Menu

Ch 23-0 - - - - - - -

To Move Enter To Change Menu To Exit

Channel Labels Menu

Ch 23-0 - - - - - - -

To Move Enter To Change Menu To Exit

-

* ?

SPACE

If the character which you desire appears, press ▶.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must choose the empty space from the list of characters.

5

When you finish inputting the label name, press SETUP/TV

MENU to return to the normal screen.

6

Repeat steps 1-5 for other channel. You can assign a label to each channel.

22

NOTE:

The channel labels will be reset after

“Auto Ch Search”.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV RATING” and “MPAA” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.

To register a password

1

Press SETUP/TV MENU in the TV mode. The menu screen will appear.

Press ▲ or ▼ to select

“Feature” menu, then press ▶.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

Feature

To Move Enter To Select Menu To Exit

2

Press ▲ or ▼ to select

“Password Set”, then press ▶ or ENTER.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

To Move Enter To Select Menu To Exit

3

Use Number buttons

(0-9) to enter your password

(The factory default password is “0000”).

4

Select and enter a password (4 digits) using

Number buttons (0-9).

5

Enter the same password again to confirm.

The password is now registered.

Feature

Enter Old Password

“ ” appears instead of the number.

Enter New Password

Confirm New Password

NOTE:

If you forget the password, contact

Customer Service at 1-800-289-0980 for assistance.

Your original remote control will be required.

To avoid forgetting the password, write it down and keep in a safe place.

23

Setting the V-Chip

To set the V-Chip

1

Press SETUP/TV MENU in the TV mode.

Press ▲ or ▼ to select

“Feature” menu, then press ▶.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

2

Press ▲ or ▼ to select

“Parental Control”, then press ▶ or ENTER.

Use Number buttons

(0-9) to enter your password. The Parental

Control Menu appears.

3

Press ▲ or ▼ to select

“US Ratings”, then press

▶ or ENTER.

Feature

Enter Password

To Move Enter To Select Menu To Exit

Parental Control Menu

US Ratings

Advanced Rating Off

24

To use the TV after the TV is protected.

When a program is received that is blocked by the V-Chip, press DISPLAY or SETUP/TV MENU.

The protection will be temporarily overridden. If the TV is turned off, the

V-Chip restriction will be reactivated.

NOTE:

The V-Chip function is activated only on programs and input sources that include a rating signal.

To Move To Select Menu To Exit

Enter

4

Press ▲/▼/◀/▶ to select the desired rating, then press

ENTER.

Parental Control Menu

MPAA

TV Rating

NONE: TV Rating is not set children

TV-Y7: 7 years old and above audience

TV-PG: Parental guidance

TV-14: 14 years old and above

TV-MA: 17 years old and above

ALL (All)

FV (Fantasy

L (Language)

S (Sex)

V (Violence)

D (Dialogue)

NONE

G

PG

PG-13

R

NC-17

X

To Move

NONE

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

Enter

TV Rating

ALL FV L S

To Select Menu To Exit

V D

MPAA (Motion Picture Association of America)

NONE: MPAA is not set.

ages

PG: Parental guidance

PG-13: Parental guidance less than 13 years old

R: Under 17 years old Parental guidance suggested

NC-17: 17 years old and above

5

Press SETUP/TV MENU to return to the normal screen.

Setting the V-Chip

To change the password

1

Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2

Press ▲ or ▼ to select

“Feature” menu, then press ▶.

Picture

Sleep Timer

Advanced Video Menu

Off

Password Set

Audio

Setup

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Feature To Move Enter To Select Menu To Exit

3

Press ▲ or ▼ to select

“Password Set”, then press ▶ or ENTER.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

To Move Enter To Select Menu To Exit

4

Use Number buttons

(0-9) to enter your password.

5

Enter a new password using Number buttons

(0-9).

6

Enter the same password again to confirm.

The password is now registered.

Feature

Enter Old Password

Enter New Password

Confirm New Password

25

Setting the V-Chip

Downloading the additional V-Chip rating system

As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future.

To download the additional V-Chip rating system

(when available)

1

Press SETUP/TV MENU in a digital channel.

Press ▲ or ▼ to select

“Feature” menu, then press ▶.

Picture

Audio

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Setup Digital Closed Caption

Off

Off

Off

2

Press ▲ or ▼ to select

“Parental Control”, then press ▶ or ENTER.

Use Number buttons

(0-9) to enter your password. The Parental

Control Menu appears.

3

Press ▲ or ▼ to select

“Advanced Rating”, then press ▶ to select “On”.

The “Parental Lock

(DTV)” option appear.

Feature

Enter Password

To Move Enter To Select Menu To Exit

Parental Control Menu

US Ratings

Advanced Rating Off

To Move Enter To Select Menu To Exit

26

NOTE:

You can only download the additional

V-Chip rating system when your TV is receiving a digital signal.

When you download the additional rating system, it may take some time for the download to occur.

The V-Chip rating information and system are not determined or controlled by the TV.

The standard V-Chip rating system is available whether your TV is receiving a digital signal or not, and will block both analog and digital programs.

To set the restriction level using the standard V-Chip rating system, select

US Ratings in step 3.

The downloadable V-Chip rating system is an evolving technology, and availability, content, and format may vary.

You cannot select this feature if the TV is not receiving a digital signal for the current station.

4

Press ▲ or ▼ to select

“Parental Lock (DTV)”, then press ▶ or ENTER.

Parental Control Menu

US Ratings

Advanced Rating

Parental Lock (DTV)

On

To Move To Select Menu To Exit

Enter

5

If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed.

6

Set your preferred content rating limits for the additional rating system.

Closed Caption

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs. Closed

Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally,

Closed Captions in English are transmitted on CC1 and Closed Captions in other languages are transmitted on

CC2.

Text: The Text Closed Caption Mode will usually fill 1/2 of the screen with a programming schedule or other information.

1

Press SETUP/TV MENU in the TV mode. Press ▲ or ▼ to select “Feature” menu, then press ▶.

2

Press ▲ or ▼ to select “NTSC CC” or “ATSC CC”.

When you select “NTSC

CC”, you can choose

CC1, CC2, CC3, CC4,

TEXT1, TEXT2, TEXT3,

TEXT4 and Off.

Picture

Audio

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

Off

Off

Off ATSC CC

Digital Closed Caption

Setup

To Move Enter To Select Menu To Exit Feature

When you select “ATSC

CC”, you can choose from CS1, CS2, CS3,

CS4, CS5, CS6 and Off.

Picture

Sleep Timer

Advanced Video Menu

Password Set

Off

NOTE:

Depending on the broadcast signal, some

Analog Captions will function with a Digital broadcast signal but

Audio

Setup

Feature

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

To Move Enter To Select Menu

Digital Captions will take precedence on the TV/DVD.

To disable the Digital Captions, turn the “ATSC CC” off.

Off

Off

To Exit

3

Press ▶ or ENTER to select the desired Closed Caption mode.

NOTE:

To turn the Closed Caption feature off, select “Off”.

4

Press SETUP/TV MENU to return to the normal screen.

NOTE:

If the program or video you selected is not closed-captioned, no captions will display on-screen.

If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set the

Closed Caption feature to “Off”.

When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.

If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal withClosed Captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with Closed Captions.

•Some cable systems and copy protection systems may interfere with the Closed Captioned signal.

If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

27

CC advanced

When you have selected Custom as the display method, you can adjust the various setting listed below as follows:

This feature is designed to customize Digital Captions only.

1

Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2

Press ▲ or ▼ to select

“Feature” menu, then press ▶.

Picture

Sleep Timer

Advanced Video Menu

Off

Password Set

Audio

Setup

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Feature To Move Enter To Select Menu To Exit

3

Press ▲ or ▼ to select

“Digital Closed Caption”, then press ▶ or ENTER.

The Digital Closed

Caption menu will appear.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

28

NOTE:

Do not set the Closed Caption “Text

Color” and “Background Color” as the same color or you will not be able to see the text.

Do not set both the “Text Opacity” and the “ Background Opacity” to

“Transparent” or you will not be able to see the text.

Feature To Move Enter To Select Menu To Exit

4

Press ▲ or ▼ to select

“Style”, then press ▶ or ENTER to select

“Custom”.

Digital Closed Caption

Style Automatic

Size Automatic

Font Automatic

Text Color

Text Opacity

Background Color

Automatic

Automatic

Automatic

Background Opacity

Edge Effect

Edge Color

Automatic

Automatic

Automatic

D E C I D E D B Y B R O A D C A S T I N G

To Move

Enter To Select Menu To Exit

5

Press ▲ or ▼ to select desired setting, then press ▶ or ENTER.

Digital Closed Caption

Style

Size

Font

Text Color

Text Opacity

Background Color

Background Opacity

Edge Effect

Edge Color

Custom

Normal

Default

White

Solid

Black

Solid

None

Black

C L O S E D C A P T I O N S A M P L E

To Move Enter To Select Menu To Exit

You can select from among the following items and parameters.

Size:

Font:

Text Color:

Small, Normal, Large

Default, Font 1, Font 2, Font 3, Font 4,

Font 5, Font 6, Font 7,

Red, Green, Blue, Yellow, Magenta,

Cyan, Black, White

Text Opacity: Transparent,

Flashing

Background Color: Red, Green, Blue, Yellow, Magenta,

Cyan, Black, White

Background Opacity: Transparent, Translucent, Solid,

Edge Effect:

Edge Color:

Flashing

None, Raised, Depressed, Uniform,

Left Shadow, Right Shadow

Red, Green, Blue, Yellow, Magenta,

Cyan, Black, White

6

Press SETUP/TV MENU to return to the normal screen.

You can view 480i and 480p format programs in a variety of picture sizes— Normal, Zoom, Wide and

Cinema.

Setting the picture size

Selecting the picture size

1

Press SETUP/TV MENU in the TV mode.

Press ▲ or ▼ to select

“Picture” menu, then press ▶.

Picture

Audio

Setup

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Picture Size

100

50

50

50

50

Vivid

Wide

To Move Enter To Select Menu To Exit

2

Press ▲ or ▼ to select

“Picture Size”, then press

▶ or ENTER to select the desired picture size, as described below and on the next page.

Feature

Picture

Audio

Setup

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Picture Size

100

50

50

50

50

Vivid

Wide

Feature To Move

Enter To Select

3

Press SETUP/TV MENU to return to the normal screen.

Menu To Exit

Normal picture size

In some cases, this image will display the size of standard 4:3 with a black side bar.

NOTE:

You can also set the picture size by pressing SCREEN SIZE on the remote control.

Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

Zoom picture size (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

29

30

Setting the picture size

NOTE:

In COMPONENT mode with a scanning rate of 720p or 1080i, only the Normal and Cinema picture size features are available.

In PC mode, only the Normal and

Wide picture size features are available.

In Cinema picture size, some of the on screen display items may be positioned off the visible portion of the screen.

Wide picture size (for 4:3 format programs)

To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio.

The top and bottom edges of the picture may be hidden.

Cinema picture size (for letter box programs)

The entire picture is uniformly enlarged—it is stretched the same amount both wider and taller (retains its original proportion).

The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

Adjusting the picture preference/Picture control adjustment

You can select four picture modes—

Vivid, Standard, Movie and User—as described in the following table:

NOTE:

The Contrust default setting is set to maximum at the factory.

Adjusting the picture preference

1

Press SETUP/TV MENU in the

TV mode. Then press ▲ or ▼ to select “Picture” menu, then press

▶.

Picture

Audio

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Setup

Picture Size

2

Press ▲ or ▼ to select “Picture

Mode”.

Feature

100

50

50

50

50

Vivid

Wide

To Move Enter To Select Menu To Exit

Vivid

Picture

Audio

Setup

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Picture Size

100

50

50

50

50

Wide

3

Press ▶ or ENTER to select the item you want to adjust.

Feature To Move Enter To Select Menu To Exit

Picture

Audio

Setup

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Picture Size

80

50

50

50

50

Standard

Wide

Feature To Move

Enter

To Select Menu To Exit

Mode

Vivid

Picture Quality

Bright and dynamic picture (factory-set)

Standard Standard picture quality (factory-set)

Movie

Movie-like picture setting (factory-set)

User

Your personal preferences (set by you; see

“Picture control adjustment” below).

4

After your desired setting, press SETUP/TV MENU to return to the normal screen.

Picture control adjustment

1

Press SETUP/TV MENU in the

TV mode. Then press ▲ or ▼ to select “Picture” menu, then press

▶.

Picture

Audio

Setup

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Picture Size

100

50

50

50

50

Vivid

Wide

2

Press ▲ or ▼ to select the item you want to adjust, then press ▶ or ENTER.

Press ◀ or ▶ to adjust the setting.

Feature To Move Enter To Select Menu To Exit

Picture

Audio

Setup

Picture Mode

Contrast

Brightness

Sharpness

Color

Tint

Picture Size

100

50

50

50

50

Vivid

Wide

Feature To Move Enter To Select Menu To Exit

• Press ▲ or ▼ to change the adjusting item.

Contrast 56

Contrast

Brightness

Sharpness

Color

◀ decrease contrast decrease brightness makes picture softer be pale color

▶ increase contrast increase brightness makes picture clearer be brilliant color

Tint

be greenish color be reddish color

3

After your desired setting, press SETUP/TV MENU to return to the normal screen.

31

32

DNR/Selecting the color temperature

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the picture.

1

Press SETUP/TV MENU in the

TV mode. Then press ▲ or ▼ to select “Feature” menu, then press ▶.

Picture

Audio

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

Off

NTSC CC Off

Off ATSC CC

Digital Closed Caption Setup

2

Press ▲ or ▼ to select

“Advanced Video Menu”, then press ▶ or ENTER.

Feature To Move Enter To Select Menu To Exit

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

3

Press ▲ or ▼ to select “DNR”.

Press ▶ or ENTER to select “On” or “Off”.

Feature To Move

Advanced Video Menu

DNR

Color Temperature

3D Y/C

Enter To Select Menu To Exit

On

Cool

On

To Move

Enter

To Select Menu

4

Press SETUP/TV MENU to return to the normal screen.

To Exit

Selecting the color temperature

Change the picture quality by selecting from three preset color temperatures—Cool, Normal, and Warm:

1

Press SETUP/TV MENU in the

TV mode. Then press ▲ or ▼ to select “Feature” menu, then press ▶.

Picture

Audio

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

Off

NTSC CC Off

ATSC CC Off

Setup Digital Closed Caption

2

Press ▲ or ▼ to select

“Advanced Video Menu”, then press ▶ or ENTER.

Feature To Move Enter To Select Menu To Exit

3

Press ▲ or ▼ to select “Color

Temperature”.

Press ▶ or ENTER to select the mode you prefer.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

Feature To Move

Advanced Video Menu

DNR

Color Temperature

3D Y/C

Enter To Select Menu To Exit

On

Cool

On

To Move Enter To Select Menu To Exit

Mode

Cool

Normal

Warm

Picture Quality

Bluish

Neutral

Reddish

4

Press SETUP/TV MENU to return to the normal screen.

3D Y/C reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a video cassette or disc damaged by repeated use.

1

Press SETUP/TV MENU in the TV mode. Then press ▲ or ▼ to select

“Feature” menu, then press ▶.

Setting the 3D Y/C

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

Feature To Move Enter To Select Menu To Exit

2

Press ▲ or ▼ to select

“Advanced Video Menu”, then press ▶ or ENTER.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Password Set

Parental Control

NTSC CC

ATSC CC

Digital Closed Caption

Off

Off

Off

3

Press ▲ or ▼ to select

“3D Y/C”.

Press ▶ or ENTER to select “On” or “Off”.

Feature To Move

Advanced Video Menu

DNR

Color Temperature

3D Y/C

Enter To Select Menu To Exit

On

Cool

On

To Move Menu

Enter To Select

4

Press SETUP/TV MENU to return to the normal screen.

To Exit

33

34

Selecting Stereo/Second Audio Program (SAP)/

Sound control adjustment

The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information.

When the TV receives a stereo or

SAP broadcast, the word “Stereo” or “SAP” displays on-screen every time you turn the TV on, change the channel, or press DISPLAY.

Selecting Stereo/Second Audio Program (SAP)

1

Press SETUP/TV MENU in the

TV mode. Then press ▲ or ▼ to select “Audio” menu, then press ▶.

Picture

Audio

Audio Language

MTS

Bass 31

Treble 31

Balance 31

English

Stereo

Digital Audio Output PCM

Setup

2

Press ▲ or ▼ to select “MTS”, then press ▶ or ENTER to select “Stereo”.

Feature To Move Enter To Select Menu To Exit

Picture

Audio

Audio Language

MTS

Bass 31

Treble 31

Balance 31

Digital Audio Output

Setup

English

Stereo

PCM

Feature To Move Enter To Select Menu To Exit

3

Press SETUP/TV MENU to return to the normal screen.

NOTE:

Generally you can leave your TV in stereo mode because the

TV automatically outputs the type of sound being broadcast

(stereo or mono).

If the stereo sound is noisy, select Mono to reduce the noise.

To listen to a second audio program (SAP)

Press ▶ or ENTER to select “SAP” in step 2 above. The TV speakers will output the second audio program instead of normal audio.

Sound control adjustment

1

Press SETUP/TV MENU in the

TV mode. Then press ▲ or ▼ to select “Audio” menu, then press ▶.

Picture

Audio

Audio Language

MTS

Bass 31

Treble 31

Balance 31

Digital Audio Output

Setup

English

Stereo

PCM

To Move

Enter

To Select Menu To Exit

2

Press ▲ or ▼ to select the item you want to adjust, then press

▶ or ENTER.

Feature

Picture

Audio

Setup

Audio Language

MTS

Bass 31

Treble 31

Balance 31

Digital Audio Output

English

Stereo

PCM

Feature To Move Enter To Select Menu To Exit

◀ or ▶ to adjust the bass sound.

Treble: Press

Balance: Press ◀ or ▶ to obtain an equal sound level from both speakers.

• Press ▲ or ▼ to change the adjusting item.

Bass 31

3

After your desired setting, press SETUP/TV MENU to return to the normal screen.

Selecting the audio language/

Selecting the digital output

Selecting the audio language

When two or more audio languages are included in a digital signal, you can select one of the audio language.

1

Press SETUP/TV MENU in the TV mode. Then press ▲ or ▼ to select

“Audio” menu, then press

▶.

Picture

Audio

Audio Language

MTS

Bass

Balance

31

Treble 31

31

English

Stereo

Digital Audio Output PCM

Setup

Feature To Move Enter To Select Menu To Exit

2

Press ▲ or ▼ to select

“Audio Language”. Then press ▶ or ENTER to select your desired language.

Picture

Audio

Audio Language

MTS

Bass 31

Treble 31

Balance

Digital Audio Output

31

Setup

English

Stereo

PCM

Feature To Move Enter To Select

3

Press SETUP/TV MENU to return to the normal screen.

Menu To Exit

Selecting the digital output

You can choose the format of the digital audio output signal.

1

Press SETUP/TV MENU in the TV mode. Then press ▲ or ▼ to select

“Audio” menu, then press

▶.

Picture

Audio

Audio Language

MTS

Bass 31

Treble 31

Balance 31

English

Stereo

Digital Audio Output PCM

Setup

Feature To Move Enter To Select Menu To Exit

2

Press ▲ or ▼ to select

“Digital Audio Output”, then press ▶ or ENTER to select “PCM” or

“RAW”.

Picture

Audio

Audio Language

MTS

Bass 31

Treble 31

Balance 31

Digital Audio Output

Setup

English

Stereo

PCM

Feature

To Move Enter To Select

3

Press SETUP/TV MENU to return to the normal screen.

Menu To Exit

35

Checking the Digital-signal strength/

Resetting your settings

Checking the Digital-signal strength

This TV will allow you to view the digital signal meter for digital channels.

1

Press SETUP/TV MENU in the TV mode. Then press ▲ or ▼ to select

“Setup” menu, then press

▶.

Picture

Audio

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Cable

Channel Labels

English

Setup

Menu Language

Reset

Feature To Move Enter To Select Menu To Exit

2

Press ▲ or ▼ to select

“DTV Signal”.

Picture

Audio

Setup

Feature

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

Cable

English

To Move

Enter

To Select Menu To Exit

3

Press ▶ or ENTER to check the Digital-signal strength.

36

NOTE:

Signal meter feature is not available for analog channels.

After 180 seconds, DTV Signal screen will return to normal TV-operation automatically.

Normal

Signal Level

Weak Good

85

4

Press SETUP/TV MENU to return to the normal screen.

Resetting your settings

The Reset function returns your settings to the factory settings.

1

Press SETUP/TV MENU in the TV mode. Then press ▲ or ▼ to select

“Setup” menu, then press

▶.

Picture

Audio

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Cable

Channel Labels

Setup English Menu Language

Reset

Feature

2

Press ▲ or ▼ to select

“Reset”.

Picture

Audio

Setup

To Move

Enter To Select Menu To Exit

Tuning Band

DTV Signal

Auto Ch Search

Add On Ch Search

Manual Ch Set

Channel Labels

Menu Language

Reset

Cable

English

Feature To Move Enter To Select

3

Press ▶ or ENTER to return your settings to the factory

Menu

settings.

4

Press SETUP/TV MENU to return to the normal screen.

To Exit

Picture control adjustment in the Component and PC mode

You can adjust to optimize the performance of the TV in the

Component and PC mode.

Example: Adjust the H-Pos in the component mode.

1

Press INPUT SELECT repeatedly to select the component mode.

2

Press SETUP/TV MENU during the component mode. Then press ▲ or ▼ to select “Feature” menu, then press ▶.

Picture

Audio

Setup

Sleep Timer

Advanced Video Menu

Component Set

Off

Feature To Move Enter To Select Menu To Exit

3

Press ▲ or ▼ to select

“Component Set”, then press ▶ or ENTER.

Picture

Sleep Timer

Advanced Video Menu

Component Set

Audio

Setup

Off

4

Press ▲ or ▼ to select

“H-Pos”, then press ▶ or

ENTER.

Feature To Move Enter To Select Menu To Exit

C o m p o n e n t s e t t i n g - 7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z

H-Pos 48

V-Pos 48

Clock

Phase

Auto Adjust

Setting

50

50

Preset

To Move

Enter To Select Menu To Exit

5

Press ◀ or ▶ to adjust

• the setting.

Press ▲ or ▼ to change the adjusting item.

H-Pos 48

NOTE:

If no buttons are pressed for more than approx. 30 seconds, the Menuscreen will return to normal Monitorscreen automatically.

The “Component Set” and “PC Set” settings are not effective for other input modes.

H-Pos:

V-Pos:

Clock:

Phase:

To adjust the horizontal position of the image on the Component or PC mode.

To adjust the vertical position of the image on the Component or PC mode.

To minimize any vertical bars or stripes visible on the screen background.

This must be adjusted after the frequency of the Component or PC mode has been set to 60Hz to optimize picture quality

(page 61).

Auto Adjust

(PC Setting only): To optimize “H-Pos”, “V-Pos”, “Clock” and

Setting:

“Phase” automatically.

To return your settings to the factory settings.

6

Press SETUP/TV MENU to return to the normal screen.

37

Preparation/Status display of disc

The following pages describe the setup/operation in DVD mode.

Preparation

Before DVD/CD operation, please make the following preparations.

1

Insert the AC cord plug into a standard 120V 60Hz polarized

AC outlet.

If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER.

NOTE: When connecting to other equipment, unplug the unit from the AC outlet.

2

Press POWER on the unit or on the remote control to turn on

• the unit. The POWER indicator will light.

Each time you turn the unit ON, the TV/DVD starts from the

TV mode.

When using an amplifier, switch on the amplifier.

3

Press TV/DVD to select DVD mode.

The DVD startup screen will appear on the screen.

Status display of disc

Press DISPLAY. The status display of the disc will appear on the screen.

DISC OPERATION

ELAPSED

TIME

TOTAL

TIME

TITLE NO.

DVD

Title 1/3

1/1 Eng Dolby Digital

1/1

00:15:25 01:41:39

Chapter 2/24

1/2 Eng

CHAPTER

NO.

ANGLE NO.

AUDIO LANGUAGE

SUBTITLE LANGUAGE

A KIND OF AUDIO

To make the status display screen disappear, press DISPLAY again.

38

NOTE:

If the unit does not operate properly:

Static electricity, etc., may affect the player’s operation. Disconnect the

AC power cord once, then connect it again.

Playback procedure

1

Press TV/DVD to select DVD mode.

2

Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.

3

On the screen, “ ” changes to

“Reading” and then playback will commence.

• A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press ▲, ▼, ◀, ▶ or

ENTER to operate a menu feature.

Reading

NOTE:

If a non-compatible disc is loaded,

“Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the

TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 8 and 55).

Some discs may take a minute or so to start playback.

If an 8 cm disc is placed into the disc slot and picture playback or menu display does not begin automatically, press PLAY.

A “Prohibition” symbol “ ” may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit.

If you place a single-faced disc label backwards (i.e. the wrong way)

“Reading” will appear in the display and then “Incorrect Disc” will be displayed.

Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays

DVDs according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

4

Press STOP to end playback.

5

The unit memorizes the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

If you press STOP again (“ ” appears on the screen) or unload the disc, the unit will clear the stopped point.

Press

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear mechanism noise, but it is not malfunction.

39

Special playback

NOTE: There may be a slight delay between when you press the button and the function activating.

Fast Forward Playback

Press SEARCH during normal playback.

Each press of SEARCH will increase the speed of the search

(x 2),

(CD: (x 2),

(x 4),

(x 4),

(x 8),

(x 8),

(x 15).

(x 20))

To resume normal playback, press PLAY.

Review Playback

Press SEARCH during normal playback.

Each press of SEARCH will increase the speed of the search

(x 2),

(CD: (x 2),

(x 4),

(x 4),

(x 8),

(x 8),

(x 15).

(x 20))

To resume normal playback, press PLAY.

Still Playback

Press PAUSE/STILL during normal playback to pause playback.

To resume normal playback, press

PLAY.

Frame Advance

Press PAUSE/STILL during still playback.

One frame is advanced each time you press PAUSE/STILL.

To resume normal playback, press PLAY.

Slow-motion Playback

Press SLOW Reverse or SLOW Forward during normal playback or still playback.

Each press of SLOW will change the speed of the slow x1/2, x1/4, x1/6, x1/7.

To resume normal playback, press PLAY.

To resume the still playback, press PAUSE/STILL.

Locating a chapter or track

Press SKIP Forward or SKIP Reverse during playback to locate a chapter that you want to watch.

Each time you press the button, a chapter or track is skipped.

40

NOTE:

The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen.

This player can play back MP3/WMA/

JPEG-data which has been recorded on

CD-R or CD-RW. To produce MP3/WMA/

JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/

JPEG-encoding software (not supplied).

The Apple-HFS-System cannot be played.

MP3/WMA/JPEG CD information

Limitations on MP3/WMA/JPEG CD playback

MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digit extension letters,

“mp3”, “wma”, “jpg”.

The directory and file names of MP3/

WMA/JPEG CD must correspond to ISO standardized files.

This unit can read 2000 files per disc. If one directory has more than 2000 files, it reads up to 2000 files, the remaining files will be omitted.

MP3/WMA CDs cannot be used for playback for the purpose of recording.

If the CD has both audio tracks and

MP3/WMA/JPEG files, only audio tracks are played.

It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.

Music recorded by “Joliet Recording

Specification” can be played back.

The music files recorded by “Hierarchical

File System” (HFS) cannot be played.

The unit can play back baseline and progressive JPEG files.

Limitations on display

The maximum number for display is

15 characters. Long file names will be condensed.

Available letters for display are the following: capital or lowercase letters A through Z, numbers 0 through 9, and _

(under score).

Other letters than those above are replaced by a hyphen.

Notes on MP3/WMA/JPEG files

To play back MP3/WMA/JPEG CD in the recorded order,

1.

Use MP3/WMA/JPEG software that

2.

3.

records data alphabetically or numerically.

Name each file including a two-digit or three-digit number (e.g. “01” “02” or “001”

“002”).

Refrain from making too many sub-folders.

CAUTION:

Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.

The CD-R/RW that has no music data or non-MP3/WMA/JPEG files can not be played back.

MP3/WMA/JPEG and Audio CD playback

MP3 CD/WMA and Audio CD playback

1

Load a MP3/WMA/JPEG CD or an Audio CD in the disc slot.

2

“Reading” will appear on the TV screen. Reading time will depend on the number of files on the disc.

3

A file browser screen will appear on the TV screen.

Operation status File number Elapsed time Selected file name

File list

1/15 00:00:00

/MP3-5.MP3

MP3-5

MP3-6

WMA-11

WMA-12

Picture-1

Picture-2

Picture-3

Picture-4

Select Files

Repeat :Off

Mode :Off

Music Playing

Tool kit window

Cursor Preview window

File type

: Indicates Music file (Audio CD/MP3/WMA)

: Indicates Picture file (JPEG)

• In case the current directory includes 9 files or more, press ▲ or ▼ to scroll in the file list.

To see contents in folder, select the folder and then press

ENTER. To return to the parent directory, select “ Go Up ...” then press ENTER.

In case of a CD containing a mixture of MP3, WMA and

JPEG files, the files are played back by selecting them from the file browser.

4

Press ▲ or ▼ to select the desired file.

/MP3-2.MP3

Folder-1

Select Files

When PLAY is pressed after displaying file browser displayed, or when the disc tray is closed by pressing PLAY,

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

Repeat

Mode

:Off

:Off

JPEG Preview playback begins automatically starting from the first file.

WMA-2

WMA-3

In this case, if the first file is an MP3/WMA file, only MP3/WMA files are played back in order. If the first file is a JPEG file, the first JPEG file is played back. If there is no file at a root directory, playback does not begin automatically.

5

Press ENTER.

The selected file starts playing back.

6

Press STOP to end playback.

• The unit records the stopped point. “ ” appears on the screen. Press PLAY to resume playback (from the scene point).

If you press STOP again or unload the disc, the unit will clear the stopped point.

NOTE:

During MP3/WMA/JPEG-Playback, you cannot use JUMP and A-B Repeat functions.

You can use Repeat (Track or All), Random functions and

Program playback for MP3/WMA/JPEG and Audio CD

Playback (see pages 44 and 45).

41

MP3/WMA/JPEG and Audio CD playback (continued)

1

In the file browser, press▲/▼ to select the desired JPEG file.

To display a thumbnail list, press

DVD MENU.

Press ▲/▼/◀/▶ to select the

/Picture-01.JPG

Picture-01

Picture-02

Picture-03

Picture-04

Picture-05

Select Files

Repeat

Mode

:Off

:Off desired file.

(To return to the file browser,

Picture-06

Picture-07

Picture-08

JPEG Preview

W: 2048 H: 1536 press TOP MENU.)

When PLAY is pressed after displaying the file browser, or when the disc tray is closed by pressing PLAY, playback begins automatically starting from the first file. In this case, if the first file is a JPEG file, the first JPEG file is played back. If the first file is an MP3/WMA file, only MP3/WMA files are played back in order. If there is no file at a root directory, playback does not begin automatically.

2

Press ENTER.

The selected picture appears on the TV screen.

Rotating an image

You can rotate an image by 90 degrees.

Press ANGLE during playback of the image.

“ ”, “ ”, “ ” or “ ” appears on the screen.

Zooming an image

Zoom function also can be used in viewing JPEG files.

Press ZOOM (See “Zooming” on page 46).

3

Press STOP to end playback.

The file browser appears on the TV screen.

If you want to watch the other file, repeat steps 1-2.

Select Files

The file type to make it display in the file browser can be chosen.

1

Press ◀/▶ to select “Select Files” at right column in the file

• browser.

Press ENTER, then press ▲/▼ to select file type from the list

(Music or Picture).

2

Press ENTER to add/remove check mark.

Checked file type will be displayed in the file browser.

3

Press RETURN to save the setting.

42

NOTE:

MP3 or WMA files on the KODAK

Picture CD are not recognized on this unit.

You can continuously play back all

JPEG files automatically.

Setting the JPEG interval

1

Press SETUP/TV MENU in the stop mode.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select “JPEG

Interval”, then press ▶ or ENTER.

TV Screen

Display

: : 16:9

: On

Picture Mode : Auto

JPEG Interval : Off

3

Press ▲ or ▼ to select your desired time, then press ENTER.

TV Screen

Display

Picture Mode

JPEG Interval

: : 16:9

: On

: Auto

Off

5 Seconds

10 Seconds

15 Seconds

Off:

Plays back one file at a time.

5 Seconds:

Plays back images in the form of a slide show at 5 second intervals.

10 Seconds:

Plays back images in the form of a slide show at 10 second intervals.

15 Seconds:

Plays back images in the form of a slide show in 15 second intervals.

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

43

Program playback (CD)

You can arrange the order of tracks on the disc.

1

In the file browser, press

▲/▼/◀/▶ to select “Edit Mode”, then press ENTER.

Folder-1

Folder-2

Repeat

Mode

:Off

:Off

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

/MP3-1.MP3

Edit Mode

When “Edit Mode” is black color, you can mark the files which you want to add into Program list.

2

Press ▲/▼/◀/▶ to select the file you want to add into the program list.

Press ENTER. Selected file was marked.

Repeat this procedure to select the other files.

3

Press ▲/▼/◀/▶ to select “Add To

Program”.

Then press ENTER. All marked files are added into the program list.

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

JPEG Preview

Repeat

Mode

:Off

:Off

Edit Mode

JPEG Preview

Edit Mode

Program View

Add To Program

When you finish storing the files you want into the Program list, select “Edit Mode” again and press ENTER to release edit mode.

WMA-1

WMA-2

WMA-3

JPEG Preview

4

Press ▲/▼ to select “Program View”, then press ENTER. Program View shows only the programed files that you have added in Step 2.

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

Edit Mode

Program View

Add To Program

JPEG Preview

MP3-1

MP3-2

MP3-3

WMA-3

Edit Mode

Browser View

Clear Program

JPEG Preview

Browser View Program View

5

In the Program View, press PLAY. The files start to playback in programmed order that were added by you.

To remove file from program list in stop mode

In the Edit Mode, switch to Program

View. Select the files you want to remove, then press ENTER. Select

“Clear Program” and press ENTER.

Marked file is removed from program list.

44

NOTE:

The program is cancelled when you eject the disc or turn the power off.

Repeat playback (CD)/Random playback (CD)

Repeat playback

1

In the file browser, press

▲/▼/◀/▶ to select “Repeat” during stop mode.

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

Select Files

Repeat :Off

Mode :Off

JPEG Preview

2

Press ENTER repeatedly to select “Track” or “All”.

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

Select Files

Repeat

Mode

:Track

:Off

JPEG Preview

3

Press PLAY.

The unit automatically starts repeat playback after finishing the current track.

To resume normal playback, select Repeat : “Off” in step 2.

Random playback

1

In the file browser, press

▲/▼/◀/▶ to select “Mode” during stop mode.

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

Select Files

Repeat :Off

Mode :Off

JPEG Preview

2

Press ENTER to select

“Random”.

Folder-1

Folder-2

MP3-1

MP3-2

MP3-3

WMA-1

WMA-2

WMA-3

Select Files

Repeat :Off

Mode :Random

JPEG Preview

3

Press PLAY.

The Random playback will start.

To resume normal playback, select Repeat : “Off” in step 2.

NOTE:

The repeat or random function is canceled when you eject the disc or turn the power off.

The track repeat function is canceled when SKIP or is pressed.

In case of Audio CD, the function of A-

B Repeat also can be used. See “A-B

Repeat playback” 47.

45

Zooming/Locating desired scene

Zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1

Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM magnification 1 (x

1.3), 2 (x 1.5) and 3 (x 2.0).

1

2

Press ▲/▼/◀/▶ to view a different part of the frame.

You may move the frame from the center position UP, DOWN,

LEFT or RIGHT.

3

In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off).

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back.

1

Press JUMP during playback or resume stop mode.

Title

Jump

Chapter

Time

2

Press ▲ or ▼ to select the “Time”, “Title/track” or “Chapter”.

3

Press Number buttons (0–9) to input the number.

• If you input a wrong number, press CANCEL.

Refer to the package supplied with the disc to check the numbers.

4

Press ENTER.

• Playback starts.

When you change the title, playback starts from Chapter 1 of the selected title.

Some discs may not work in the above operation.

46

NOTE:

You can select the Pause, Slow or

Search playback in the zoom mode.

Some discs may not respond to zoom feature.

NOTE:

Some discs may not work with the repeat operation.

In A-B repeat mode, subtitles near point A or B may not appear.

During the A-B Repeat Playback the

ANGLE feature will not operate.

You may not be able to set A-B

Repeat, depending on the scenes of the DVD.

A-B Repeat does not work with an interactive DVD, MP3/MPEG/WMA/

JPEG-CD.

Repeat playback

Title, Chapter, Track Playback

1

Press PLAY MODE during playback or stop mode.

2

Press ENTER repeatedly to select “Chapter” or “Title”.

The unit automatically starts repeat playback after finishing the current title or chapter.

Repeat

Play Mode

: Off

• If you set the repeat mode during stop mode, press PLAY to start Repeat playback.

3

Press PLAY MODE again to make the screen disappear.

• Press PLAY to start Repeat playback.

To resume normal playback, select Repeat “Off” in step 2.

A-B Repeat Playback

A-B repeat playback allows you to repeat material between two selected points.

1

Press REPEAT A-B during playback.

The start point is selected.

A

2

Press REPEAT A-B again.

The end point is selected.

Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again.

3

To resume normal playback press REPEAT A-B again.

“ Off ” appears on the screen.

A B

47

Marking desired scenes

The TV/DVD stores the points that you want to watch again. You can resume playback from that scene.

Marking the Scenes

1

Press MARKER during playback.

Marker 1

Marker 2

Marker 3

2

Select the blank Marker using ▲ or ▼, then press ENTER at the desired scene.

Marker 1

Marker 2

Marker 3

00 27 54

• Up to 3 scenes can be selected.

Repeat this procedure to set the other 2 scenes.

3

Press MARKER to remove this display.

Returning to the Scenes

1

Press MARKER during playback or stop mode.

Marker 1

Marker 2

Marker 3

00 27 54

01 16 25

02 08 31

2

Press ▲ or ▼ to select the Marker

1-3.

3

Press ENTER.

Playback starts from the marked scene.

Marker 1

Marker 2

Marker 3

00 27 54

01 16 25

02 08 31

To Cancel the Mark

1

Press MARKER during playback or stop mode.

2

Press ▲ or ▼ to select the Marker 1-3.

3

Press CANCEL.

Press MARKER to remove this display.

48

NOTE:

The marking is canceled when you eject the disc or turn the power off.

Some subtitles recorded around the marker may fail to appear. [DVD]

Changing soundtrack language/Subtitles

Changing soundtrack language

You can select the language when you play a multilingual disc.

1

Press AUDIO during playback.

The current soundtrack language will appear.

1/2 Eng Dolby Digital

2

Press AUDIO repeatedly until the desired language is selected.

The on-screen display will disappear after a few seconds.

Off

The on-screen display will disappear after a few seconds.

Subtitles

Turning the subtitles on and off

When playing back a disc recorded with subtitles, you can turn the subtitles on or off.

Press SUBTITLE during playback until “Off” appears.

Off

Changing the subtitle language

You can select the language when playing back a disc recorded with multi-lingual subtitles.

1

Press SUBTITLE repeatedly during playback until your desired language appears.

1/5 Eng

NOTE:

If the desired language is not heard after pressing AUDIO several times, the language is not recorded on the disc.

Changing soundtrack language is cancelled when you eject the disc.

The initial default language or available language will be heard if the disc is played back again.

Changing subtitle language is cancelled when you eject the disc.

Some functions may not work on some DVDs. You may not be able to turn subtitles on or off or change subtitles. While playing the DVD, the subtitle may change when:

- you eject the disc.

- you change the title.

In some cases, the subtitle language is not changed to the selected one immediately.

2

The on-screen display will disappear after a few seconds.

49

Changing angles/Title selection/DVD menu

Changing angles

When playing back a disc recorded with multi-angle facility, you can change the view angle.

1

Press ANGLE during playback.

1/2

The current angle will appear.

2

Press ANGLE repeatedly until the desired angle is selected.

Title selection

Two or more titles are recorded on some discs.

If the title menu is recorded on the disc, you can select the desired title.

1

Press TOP MENU during playback.

Title menu appears on the screen.

2

Press ▲/▼ or ◀/▶ to select the desired title.

3

Press ENTER or PLAY.

The playback of the selected title will start.

DVD menu

Some DVDs allow you to select the disc contents using the menu.

When you play back these DVDs, you can select the subtitle language and soundtrack language, etc. using the DVD menu.

1

Press DVD MENU during playback.

The DVD menu appears on the screen.

• Press DVD MENU again to resume playback at the scene when you pressed DVD MENU.

2

Press ▲/▼ or ◀/▶ to select the desired item.

3

Press ENTER.

The menu continues to another screen. Repeat steps 2 and 3 to set additional items if any.

50

NOTE:

Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.

Depending on the DVD, you may not be able to select the title. Depending on the DVD, a “title menu” may simply be called a “menu” or “title” in the instructions supplied with the disc.

You can select the language of

“Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc.

Setting the language

1

Press SETUP/TV MENU in the stop mode.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select desired option, then press ▶ or ENTER.

Menu : English

Subtitle : English

Audio : English

3

Press ▲ or ▼ to select your desired language (e.g. English).

Menu

Subtitle

Audio

English

Francais

Espanol

Other

English, Francais, Espanol :

The selected language will be heard or seen.

Other:

Other language can be selected (see the “Language code list” on page 58).

Original (Audio):

The unit will select the first priority language of each disc.

Off (Subtitle):

Subtitles do not appear.

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

NOTE:

If the selected language is not recorded on the disc, the first priority language is selected.

51

Setting the aspect ratio of TV screen/Setting on screen display

Setting the aspect ratio of TV screen

You can select the aspect ratio of the picture.

1

Press SETUP/TV MENU in the stop mode or No Disc.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select “TV

Screen”, then press ▶ or ENTER.

TV Screen

Display

: 16:9

: On

Picture Mode : Auto

JPEG Interval : Off

3

Press ▲ or ▼ to select your desired screen type, then press

ENTER.

TV Screen

Display

4:3

4:3

16:9

Picture Mode

JPEG Interval : Off

You have the following screen sizes to choose from:

4:3 Letterbox

When playing back a wide screen DVD disc, it displays the wide picture with black bands at the top and bottom of screen.

4:3 Panscan

It displays the wide picture on the whole screen with left and right edges automatically cut off.

16:9 Wide

A wide screen picture is displayed full size.

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

Setting on screen display

On screen display can be switched on or off when you press the

DISPLAY button.

1

Press SETUP/TV MENU in the stop mode or No Disc.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select “Display”, then press ▶ or ENTER.

TV Screen

Display

: 16:9

: On

Picture Mode : Auto

JPEG Interval : Off

52

NOTE:

It is not always possible for the DVD disc to display the picture as per your preferred picture setting - for example, if you select “4:3 Panscan”, the disc may not offer this option. In this case the picture would display the format the disc is capable of playing back.

3

Press ▲ or ▼ to select “On” or

“Off”, then press ENTER.

TV Screen

Display

Picture Mode

JPEG Interval

: : 16:9

Off

On

: Off

On: On screen displays appear when you press the buttons

(factory setting).

Off: On screen displays do not appear when you press any buttons except SUBTITLE, PLAY MODE, MARKER and

DISPLAY.

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content

(video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed.

Setting the picture mode

Setting the picture mode

1

Press SETUP/TV MENU in the stop mode.

2

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

Press ▲ or ▼ to select “Picture

Mode”, then press ▶ or ENTER.

TV Screen

Display

: 16:9

: On

Picture Mode : Auto

JPEG Interval : Off

3

Press ▲ or ▼ to select your desired picture mode, then press

ENTER.

TV Screen

Display

Picture Mode

JPEG Interval

: : 16:9

: On

Auto

Film

Video

Auto:

Select this position normally.

The DVD player automatically detects source content, film or video, of playback source.

Film:

Suitable for playback of film content pictures.

Video:

Suitable for playback of video content pictures.

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

NOTE:

Depending on the disc, pictures may be cut off or doubled. In this case, select “Video”.

53

Night Mode/Digital Out

Night Mode

Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

1

Press SETUP/TV MENU in the stop mode or No Disc.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select “Night

Mode”, then press ▶ or ENTER.

Night Mode : Off

Digital Out :PCM

3

Press ▲ or ▼ to select “On” or

“Off”, then press ENTER.

On : Loud sound such as explosion or similar is toned down slightly when play back. This makes it suitable for when it is connected to a stereo.

Off : It plays back at the recording level on the disk.

Night Mode

Digital Out

Off

On

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

Digital Out

You can select the digital output sound format corresponding to your system connection.

1

Press SETUP/TV MENU in the stop mode or No Disc.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select “Digital

Out”, then press ▶ or ENTER.

Night Mode : Off

Digital Out :PCM

3

Press ▲ or ▼ to select “PCM”,

“Bitstreem” or “Off”, then press

ENTER.

Night Mode

Digital Out

: Off

Off

PCM

Bitstream

54

NOTE:

This function works only during playback of Dolby Digital recorded discs.

The level of Dynamic Range

Reduction may differ depending on

DVD video disc.

Even if you select “Bitstream”, MPEG audio will be output in PCM format.

PCM: Change Dolby Digital to PCM for the output. Select when connected to a 2 channel digital stereo amplifier.

Bitstream: Disc audio bitstream data will be output.

Off: There is no sound output from DIGITAL AUDIO

OUT jack.

4

Press SETUP/TV MENU or RETURN to remove the menu screen.

Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit.

Parental control setting

1

Press SETUP/TV MENU in the stop mode or No Disc.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select “Parental”, then press ▶ or ENTER.

“Enter Password” screen will appear.

Parental

Password

: Off

: Change

3

Press “0000” using Number

buttons (0-9). (Please note, this pre-setting password of this unit).

Then press ENTER. The parental level list will appear.

Parental

Password

1

2

3

4

5

6

7

8

Off

Level Off : The parental control setting does not function.

Level 8 : Virtually all DVD software can be played back.

Level 1 : DVD software for adults cannot be played back.

Select from level 1 to level 8. The limitation will be more severe as the level number decreases.

• If you input a wrong number, press CANCEL.

4

Press ▲ or ▼ to select the level

Parental

1 to level 8. The limitation will be more severe as the level number is lower. Then press ENTER.

Password

: 2

: Change

5

Press SETUP/TV MENU or RETURN to remove the menu screen.

NOTE:

If each setup (P.51~56) has been completed, the unit can always be operated under the same conditions (especially with DVD discs).

Each setup will be retained in the memory when you turn the power off.

Depending on the discs, the unit cannot limit playback.

Some discs may not be encoded with specific rating level information though its disc jacket says “adult”. For those discs, the age restriction will not work.

After the rating is locked, the setting cannot be changed unless you enter the correct password.

55

Setting the new password

1

Press SETUP/TV MENU in the stop mode or No Disc.

Press ▲ or ▼ to select option, then press ◀/▶ or ENTER.

2

Press ▲ or ▼ to select

“Password”, then press ▶ or

ENTER.

“Enter Current Password” screen will appear.

Parental

Password

: Off

: Change

3

Press Number buttons (0-9) to enter the password you have stored.

• If you input a wrong number, press CANCEL.

4

Then press ENTER. “Enter New

Password” screen will appear.

Press Number buttons (0–9) to input the new password.

Parental

Password

: Off

: Change

Enter Current Password

Parental

Password

: Off

: Change

Enter New Password

5

Press ENTER.

Now your new password has been set.

Be sure to remember this number!

56

NOTE:

Do not forget the password. If you forget the password, contact

Customer Service at 1-800-289-0980.

The original remote control will be required.

Temporary disabling of rating level by DVD disc

Some pre-recorded DVD discs may attempt to temporarily cancel the rating level that you have set. You will be given the option to allow or not allow the override.

1

Load a DVD disc (see page

39).

2

If the DVD disc has been designed to temporarily cancel the

Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with ENTER key, password input screen will then appear.

3

Enter the password with

Number buttons (0-9).

Then press ENTER.

Enter Password

• If you interrupt the entering, press RETURN.

4

Playback will commence if the entered password was correct.

NOTE:

This temporary cancellation of the rating level will be kept until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

57

58

Language code list

Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 51).

Language Name Code Language Name Code Language Name Code Language Name Code

Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919

Afar

Afrikaans

1111 Finnish 1619 Lithuanian

1116 French 1628 Macedonian

2230 Slovak

2321 Slovenian

2921

2922

Albanian

Amharic

Arabic

2927 Frisian 1635 Malagasy

1123 Galician 1722 Malay

1128 Georgian 2111 Malayalam

2317 Somali

2329 Spanish

2322 Sundanese

2925

1529

2931

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali; Bangla

Bhutani

Bihari

Breton

Bulgarian

1835 German

1129 Greek

1135 Greenlandic 2122 Marathi

1136 Guarani 1724 Moldavian

1211 Gujarati

1531 Hausa

1224 Hebrew

1436 Hindi

1218 Hungarian

1228 Icelandic

1217 Indonesian

1415 Maltese

1522 Maori

1731 Mongolian

1811 Nauru

1933 Nepali

1819 Norwegian

1831 Oriya

1929 Panjabi

1924 Pashto, Pushto

2330 Swahili

2319 Swedish

2328 Tagalog

2325 Tajik

2324 Tamil

2411 Tatar

2415 Telugu

2425 Thai

2528 Tibetan

2611 Tigrinya

2629 Tonga

2933

2932

3022

3017

3011

3030

3015

3018

1225

3019

3025

Burmese 2335 Interlingua 1911 Persian

Byelorussian 1215 Irish 1711 Polish

Cambodian 2123 Italian 1930 Portuguese

Catalan

Chinese

Corsican

Croatian

1311 Japanese 2011 Quechua

3618 Javanese 2033 Rhaeto-Romance

1325 Kannada 2124 Romanian

1828 Kashmiri 2129 Russian

1611 Turkish

2622 Turkmen

2630 Twi

2731 Ukrainian

2823 Urdu

2825 Uzbek

2831 Vietnamese

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

1329 Kazakh 2121 Samoan

1411 Kirghiz 2135 Sanskrit

1524 Kurdish 2131 Serbian

1525 Laothian

1530 Latin

1625 Latvian, Lettish

2225 Serbo-Croatian

2211 Shona

2232 Sindhi

2923 Volapük

2911 Welsh

2928 Xhosa

2918 Yiddish

2924 Yoruba

2914 Zulu

3028

3021

3033

3121

3128

3136

3219

3225

1335

3325

3418

2019

3525

3631

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.

To connect the LCD TV/DVD to a VCR

Rear of the unit

To AUDIO/VIDEO IN To Audio/Video OUT

VCR

Audio/Video cord

(not supplied)

To connect the LCD TV/DVD to a VCR with an S-Video cord

If you connect a VCR with a S-VIDEO cable to the S-VIDEO IN jack on the rear lower right of the unit, you must also connect the audio cables to the AUDIO IN jacks on the rear lower right of the unit.

The S-VIDEO cable only carries the video signal. The audio signal is separate.

NOTE:

When the S-video cable and the standard video cable are connected at the same time, the S-video cable takes precedence.

Rear of the unit

To AUDIO IN To Audio OUT

VCR

Audio cord (not supplied)

S-Video cord (not supplied)

To S-VIDEO IN To S-Video OUT

To connect to a DVD player with Component Video Input

You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD player with the COMPONENT video cables (not supplied).

Rear of the unit

To COMPONENT IN To Component OUT

Y

Video cord (not supplied)

P

B

P

R

DVD

Audio cord (not supplied)

To AUDIO IN To Audio OUT

NOTE:

Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and

480p/720p progressive signals.

59

60

Connections to other equipment (continued)

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including

Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

TV/DVD

Subwoofer

Front

Speaker

(Right)

Front

Speaker

(Left)

Coaxial Digital

Audio Output

Coaxial digital cable

(not supplied)

Center Speaker

To Coaxial

Digital Audio Input

Surround

Speaker (Left)

AV Amplifier with built-in digital surround decoder as listed above

NOTE:

This unit will not work in conjunction with DTS audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder.

Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog broadcasting.

Surround

(Right)

To connect the TV/DVD to a camcorder, or a TV Game

To playback from a camcorder, connect the camcorder to the unit as shown.

This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You’ll need to consult each component’s Owner’s Manual for additional information.

Rear of the unit

To AUDIO/VIDEO IN or

To Audio/Video OUT

Audio/Video cord (not supplied)

Connections to other equipment (continued)

To connect the TV/DVD to a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate

(60 Hz).

Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the TV/DVD.

Press INPUT SELECT on the remote control to select PC mode.

Switch on the computer. The TV/DVD can operate as the computer monitor.

Rear of the unit

PC AUDIO

IN jack

To PC IN

VGA cable (not supplied)

Monitor Display modes

MODE Resolution Refresh

VGA 640x480

VGA 720x400

SVGA

XGA

800x600

1024x768

WXGA

WXGA

WXGA

1280x768

1280x720

1360x768

60Hz

70Hz

60Hz

60Hz

60Hz

60Hz

60Hz

Audio cord (not supplied)

To return to normal mode

Press INPUT SELECT again.

NOTE:

The on-screen displays will have a different appearance in PC mode than in TV mode.

If there is no video signal from the PC when the unit is in PC mode, “NO SIGNAL” will appear on the TVscreen.

61

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/

UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

SNOW

If the TV is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

RADIO FREQUENCY INTERFERENCE (RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or

BRIGHTNESS settings.

62

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.

Use caution when cleaning or wiping the plastic parts.

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

PAGE SYMPTOMS

POWER

POSSIBLE SOLUTIONS

TV/DVD does not operate.

TV BROADCAST RECEPTION

Make sure the power cord is plugged in.

Power is off, check fuse or circuit breaker.

Unplug unit, then plug it back in.

Poor sound or no sound.

Poor picture or no picture.

Poor reception on some channels.

Poor color or no color.

Picture wobbles or drifts.

No Cable TV reception.

Station or Cable TV experiencing problems, tune to another station.

Check Volume adjustments.

Check for sources of possible interference.

Station or Cable TV experiencing problems, tune to another station.

Check antenna or Cable TV connections, reorient antenna.

Check for sources of possible interference.

Check picture control adjustments.

Station or Cable TV experiencing problems, tune to another station.

Station signal is weak, reorient antenna to receive stronger station.

Check for sources of possible interference.

Station or Cable TV experiencing problems, tune to another station.

Make sure channels are set into memory.

Check picture control adjustments.

Check antenna or Cable TV connections, reorient antenna.

Check for sources of possible interference.

Station or Cable TV experiencing problems, tune to another station.

Make sure channels are set into memory.

Cable TV company is scrambling signal.

Check antenna orientation.

Check all Cable TV connections.

Set Tuning Band option to the “Cable” mode.

Station or Cable TV system problems, try another station.

Horizontal or diagonal bars on screen.

No reception above channel 13.

TV shuts off.

Closed - Caption is not activated.

• Check antenna connections, reorient antenna.

Check for sources of possible interference.

Make sure Tuning Band option is in the appropriate mode.

If using antenna, check UHF antenna connections.

No broadcast on station tuned.

Sleep Timer is set.

Power interrupted.

TV station experiencing problems or program tuned is not closed captioned. Try another channel.

Check Cable TV connection or VHF/UHF antenna, reposition or rotate antenna.

Set NTSC CC or ATSC CC “On” in the menu.

Display is not shown in your language.

Digital broadcasting screen problem.

• Select proper language in the menu options.

Check digital signal strength.

12

36

19

21

19

13

62

16

13

19

19, 20

62

19

13, 14

62

31

19

13

62

19

17

31

13, 14

62

19

17

13

14

16

19

13, 14

27

15

• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

63

Problems and troubleshooting (continued)

SYMPTOMS

The remote control does not function.

POSSIBLE SOLUTIONS

• Aim at the remote control at the remote sensor.

Operate within Approx. 5 Meters or reduce the light in the room.

Clear the path of the beam.

The batteries are weak. Replace the batteries.

Check the batteries are inserted correctly.

PAGE

DVD

Playback doesn’t start.

No picture.

No sound.

Picture is distorted during

CUE or REVIEW.

Stopping playback, search, slow-motion play, repeat play, or program play, etc. cannot be performed.

No 4:3 (16:9) picture.

No on-screen display.

No surround sound.

The unit or remote operation key is not functioning.

Playback does not start when the title is selected.

Audio soundtrack and/or subtitle language is not changed when you play back a DVD.

No subtitle.

Angle cannot be changed.

“ ” appears on the screen.

REMOTE CONTROL

No disc is inserted.

The disc may be dirty. Clean up the disc.

The unit cannot play CD-ROMs, etc.

TV/DVD selector is not set correctly.

Check the input selector of the amplifier is set properly.

The unit is in the Special playback mode.

Select the correct Audio Output position on AV amplifier.

• The picture will be distorted occasionally.

• Some discs may not allow some functions.

The setup does not match your TV.

Select Display On.

The setup does not match your stereo system.

Turn off the unit and unplug the AC power cord for several minutes, then replug it.

• Check the RATING LEVEL setup.

• Multilingual language is not recorded on the DVD disc.

Some discs have no subtitles.

Subtitles are cleared. Press SUBTITLE.

Multi-angles are not recorded on the DVD disc.

The function is prohibited with the unit or the disc.

29, 30, 52

52

60

15

55, 56

49

39

8

8

38

40

60

49

50

39

12

64

FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:

1-800-289-0980

WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY

OR WRITE TO:

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

FOR INFORMATION ON OUR OTHER PRODUCTS, OR TO ORDER ACCESSORIES ONLINE, PLEASE VISIT OUR WEBSITE AT

www.orionsalesinc.com

Specifications

GENERAL

Power supply:

Power consumption:

AC 120V 60Hz

Operation: 60W

Stand by: 1W

6.6 kg (14.6 lbs) Weight:

Dimensions: Width: 483 mm (19 inches)

Height: 396 mm (15-9/16 inches)

Depth: 190 mm (7-1/2 inches)

Operating temperature: 5˚C - 40˚C

Operating humidity: Less than 80%

TELEVISION

Type:

Display method:

Number of Pixels:

Viewing angle:

Tuner type:

18.95 inches (481.4 mm diagonal)

Transmission TFT color LCD panel

1440 (H) x 900 (V)

Left/Right: 80/80 degree

Up/Down: 80/80 degree

NTSC standard

Receiving channels:

Input:

ATSC standard (8VSB), QAM

VHF 2-13

UHF 14-69

CATV 14-36

37-59

60-85 (AAA)-(ZZZ)

86-94

95-99

100-135

01 (5A)

S-Video: Y-Input:1.0 V (p-p), 75 ohms

C-Input:0.3 V (p-p), 75 ohms

Video: (RCA) 1 V p-p/75 ohms

Audio: (RCA) –8 dBm/50K ohms

0.5 Vp-p 75 ohms terminated Digital audio out:

Component video input: (Y) 1 V (p-p), 75 ohms

(PB)/(PR) 0.7 V (p-p), 75 ohms

PC Monitor input:

Antenna input:

Mini-Dsub 15pin x 1

VHF/UHF In 75 ohms coaxial

Speaker:

Audio output power:

30 mm x 71 mm (1-3/16 inches x 2-13/16 inches), 8 ohms x 2

1.5W + 1.5W

DVD/CD player

Signal system:

Applicable disc:

Pickup:

ACCESSORIES:

NTSC

1.DVD (12 cm, 8 cm)

2.CD (12 cm, 8 cm)

CD: Wavelength: 790 nm

Maximum output power: 7 mW

DVD: Wavelength: 655 nm

Maximum output power: 5 mW

Remote control

Batteries (UM-4) x 2

AC Cord

Designs and specifications are subject to change without notice.

65

WARRANTY

19” TFT LCD TV WITH DVD PLAYER

ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 90 days from date of original purchase in the United States.

Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first ninety (90) days from date of original purchase, ORION will provide carry-in repair service by an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing defect in material and workmanship within one year from date of original purchase we will replace the defective part only (LABOR NOT INCLUDED AFTER THE INITIAL NINETY (90) DAY WARRANTY PERIOD) provided the defect or malfunction is verified along with dated proof of purchase.

There are ORION authorized Independent Service Centers located throughout the country. For the one nearest you, DIAL TOLL FREE: 1-800-289-0980 or visit our website at www.orionsalesinc.com. This product is eligible for in-home service for the first ninety (90) days from the original date of purchase, and thereafter for

CARRY-IN service only. ORION will not be liable for damages incurred in shipment of the unit. If there are no

ORION authorized Independent Service Centers in your area please call - 1-888-296-7466 for assistance.

Note: This warranty is void if the product is:

(a) Damaged through negligence, misuse, abuse, or accident.

(b) Used in a commercial application or rentals.

(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect warranty repairs to the class of product or by the ORION Factory Service Center.

(d) Damaged because it is improperly connected to the equipment of other manufacturers.

This warranty does not cover:

(a) Damage to video disc.

(b) Damage to equipment not properly connected to the product.

(c) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or

ORION Factory Service Center.

(d) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow operating instructions provided with the product.

(e) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s

manual.

(f) Signal reception problems caused by external antenna or cable systems.

66

THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER AND

DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRAN-

TIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF

THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE

AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS PRODUCT

THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTIC-

ULAR PURPOSE AND USE.

UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCI-

DENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE

OF THIS PRODUCT.

THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE

TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF

CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

Memo

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

..................................................................................................

67

J5Z90101A SH 07/10

N

Printed in Thailand

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement