Andi 4P Class-X

Andi 4P Class-X
User Manual
Andi 4P Class-X
Legal Information
All rights are reserved. Reproduction, transfer, distribution of the contents
herein in any manner without the prior written permission of Best IT World
(India) Pvt. Ltd. is prohibited. Best IT World (India) Pvt. Ltd. reserves the
right to add, modify or delete, any of the contents herein or withdraw this
document at any time without prior notice and without assigning any
reasons
thereof.
For
detailed
terms
and
conditions
refer
www.iBallMobiles.co.in
Safety Precautions
Operate Safely
• Please do not use Mobile while charging. Disconnect Mobile from charger
before use.
• Make sure to charge the battery full for the first time usage.
1
• Keep the mobile phone at least an inch away from your body while dialing
/ answering calls.
• Do not use the mobile phone if the screen is cracked or broken. Cracked
and / or broken screens could cause injury to hands and /or face.
• To reduce the risk of motion injuries:
- While using your mobile phone, hold it with a relaxed grip and press the
keys lightly.
- Do not handle the mobile phone with wet hands.
- Take regular breaks in between calls.
- Use hands-free accessories.
- Switch off the mobile phone before cleaning it.
- Switch off the Mobile Phone and external power sources before any
attempt to change batteries, SIM Cards or any other accessories.
- Keep your mobile phone and all accessories out of reach of small children
and animals.
2
Careful handling
• Avoid potential damage to your mobile phones as under:
- Keep away from liquids.
- Avoid using and / or storing in dusty and / or dirty places / environments.
- Do not drop, knock, throw or otherwise handle the mobile phone roughly.
- Avoid exposing your mobile phone and / or batteries to extreme
temperatures. Extreme temperatures reduce the charging capacity and life
of batteries and mobile phone.
- Never use damaged chargers or batteries.
- Do not use chemicals or other cleaning solutions to clean the mobile
phone.
- Use moist or anti-static cloth.
- Avoid using mobile phone with camera flash or light close to the eyes.
3
-Do not dismantle the mobile phone and / or accessories without
permission.
- Handling by unauthorized personnel.
Turn Off In Restricted Areas
Use of mobile phones in certain areas / places / conditions can be
hazardous.
• Switch off your mobile phone:
- Inside aircrafts;
- In Medical hospitals / clinics;
- Areas where chemicals are used and / or stored;
- Fuel and gas stations;
- In and around areas having electrical / electronic equipment;
4
- Areas where any kind of blasting activity is being carried out.
• Removing, installing or charging mobile phone batteries in such areas is
hazardous as potential sparks may result in explosion and / or fire and may
cause damage to property and / or life and can also prove fatal.
Drive Safety
Avoid using your mobile phone while driving and respect and obey all
regulations that restrict the use of mobile phones while driving. Primary
consideration while driving should be safety.
Interference with Electronic Devices
Mobile phones emit Radio Frequency (RF) signals that may interfere with
unshielded or improperly shielded electronic equipment, such as pace
makers, hearing aids, other medical devices and other electronic devices in
homes and / or vehicles and may prove to be hazardous.
5
Protect Your Hearing
Excessive exposure to high volumes may cause hearing problems.
Maintain proper volume levels for conversations and / or music.
Use and Dispose of Batteries and Chargers
• Use only iBall accessories and batteries. Using incompatible batteries and
/ or accessories may damage your mobile phone or cause injury.
• Never dispose the batter y or mobile phone in fire.
• Never crush or puncture the battery.
• Avoid exposing the batter y to high external pressure, which can lead to
an internal short circuit.
• Never place batteries or mobile phone in or on heating devices, such as
microwave ovens, stoves or radiators. Battery may explode when
overheated.
• In order to use mobile phone correctly, please read the following
statement of the user manual carefully before using the mobile phone
6
SAR Value
• Your phone is designed not to exceed the limits of emission of radio
waves recommended by international guidelines.
• SAR (Specific Absorption Rate) is the measurement of body-absorbed RF
quantity when the phone is in use. SAR value is ascertained according to
the highest RF level generated during laboratory tests.
• The SAR value of the phone may depend on factors such as proximity to
the network tower, use of accessories.
SAR recommendations:
• Use a wireless hands free system (headphone, headset) with lower
Bluetooth emitter.
• Make sure the cell phone has a low SAR.
• Please keep your calls short and use SMS whenever more convenient.
This advice applies especially to children and pregnant women.
• Prefer to use your phone when the signal quality is good.
7
• People having active medical implants should preferably keep the phone
at least
SAR Value
Tested SAR Value of Andi 4P Class-X as follows:
(2G) GSM 900MHz: 1.102 W/Kg (1g)
(2G) GSM 1800MHz: 0.765W/Kg (1g)
(3G) WCDMA 2100MHz: 0.613W/Kg (1g)
Maximum Permitted SAR value is: 1.6 W/Kg (1g)
In order to use mobile phone correctly, please read the following statement
of the user manual carefully before using the mobile phone.
8
Index
Legal Information .............................................................. 1
Safety Precautions ........................................................... 1
SAR Value ........................................................................ 7
Index ................................................................................. 9
1. Introduction ................................................................. 11
2. Contacts...................................................................... 41
3. Messaging .................................................................. 46
4. E-Mail.......................................................................... 54
5. Settings ....................................................................... 60
9
6. Internet........................................................................ 98
7. Multimedia ................................................................ 106
8. Others ....................................................................... 121
9. Applications............................................................... 135
10. Troubleshooting ...................................................... 138
10
1. Introduction
1.1 iBall
Andi
4P
Class
X
Specifications
Details
CPU
Display
Memory
Storage
Android
3GVideo Calling
Connectivity
Description
Powerful Dual Core 1.3Ghz Cortex A7 Advanced
Processor
10.16 cm (4”) IPS WVGA (800 X 480) (233PPI)
Display
1GB RAM
8GB internal storage (Approx. 6GB of built in
storage is used by OS and application files and
2GB for user data)
Micro SD Support up to 32 GB
Android™ 4.4.2 Kitkat®
Yes
3GHSPA+downlink 21Mbps, uplink 5.7Mbps
Edge/GPRS;GSM:900/1800MHz;
WCDMA: 2100MHz; Wi-Fi 802.11 b/g/n with Wi-Fi
11
Camera
Sensor
Audio Formats
Video Formats
Image Formats
Audio Port
Soft Keys
Hardware Keys
Charging Port
Battery / Power
Dimension &
weight
Direct, Wi-Fi Hotspot; Bluetooth with Tethering,
USB with USB internet, USB Tethering
Enhanced 5 MP Camera with LED flash Camera;
Enhanced 2MP Front camera for Video Calling
G sensor, Proximity sensor ,Light sensor
Support mp3, mp2, ogg, wav, aac, amr, flac,
3gp, mp4, avi, 3g2, m2ts, webm, mov
bmp, png, wbmp, jpeg
3.5 mm stereo jack
Menu, Home key & Back
Power, Volume controller
Micro USB
1400mAh / 3.8V
126.8*63.23*10.21m with 120 Gram
12
1.2 Know Your Device
13
1.3 Installing the SIM card, battery,
and storage card.
You need to remove the back cover before you can install the SIM card and
battery. Also, make sure to always turn off the power before installing or
replacing the SIM card, battery and Storage card.
To remove the back cover
1. Make sure your device is turned off.
2. Firmly hold the device with both hands and the front panel facing down.
3. Open back cover properly from the space with opening tool or by your
hand until it disengages from the device and then pull it up to remove.
To install the SIM card
14
The SIM card contains your phone number, service details, and
phonebook/ message memory. Your device is supported both 2G and 3G
(GSM) SIM cards.
1. Remove the battery if it is installed.
2. Locate the SIM card slot; Insert it as per indication mentioned nearby
SIM slot
3. Push the SIM card completely into the slot.
Note:
• The phone supports dual SIM cards and dual stand by.
• Some legacy SIM cards may not function with your device. You should
consult with your service provider for a replacement of SIM card. There
may be some fees for this service.
Install the battery
Your device comes with a rechargeable Li-Polymer Battery and is designed
to use only manufacturer-specified original batteries and accessories.
Battery performance depends on many factors, including network
15
configuration,
signal
strength,
and
Warning: To reduce risk of fire or burns:
usage
patterns.
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire or
water.
• Do not expose to temperatures above 60°C (140°F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulations.
1. Align the battery‟s exposed copper contacts with the battery connectors
at the bottom part of the battery compartment.
2. Insert the contacts side of the battery first and then gently push the
battery into place.
3. Replace the back cover.
To remove the battery
16
1. Make sure your device is turned off.
2. Remove the back cover.
3. The bottom of the phone has a notch. Lift the battery by the notch to
remove it.
To install a memory card
To have additional storage for your images, videos, music, and files, you
can purchase a memory card and install it into your device.
1. Make sure that your device is turned off, and then remove the back cover.
2. Locate the memory card slot on the upper part of the exposed Middle
panel.
3. Insert the memory card into the slot with its gold contacts facing down
until it clicks into place.
Charging the Battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you install and charge the battery. Some
17
batteries perform best after several full charge/discharge cycles.
Note: Only the AC adapter and USB sync cable provided with your device
must be used to charge the device.
Connect the USB connector of the AC adapter to the sync connector on
your device, and then plug in the AC adapter to an electrical outlet to start
charging the battery.
As the battery is being charged while the device is on, a charging icon
appears in the title bar of the Home screen. After the battery has been fully
charged, a full battery icon appears in the title bar of the Home screen.
Warning:
• Do not remove the battery from the device while you are charging it using
the AC or car adapter.
• As a safety precaution, the battery stops charging before it overheats.
18
1.4 Quick setting panel
19
Quick setting panel is the option you will find in the notification bar. This
option provides the shortcut to the following functions:
1. Owner: The information of the owner can be stored and then can be
displayed on the lock screen.
2. Battery: Select this to view the level of battery in Percentage on your
Notification Bar.
3. Settings: This is the shortcut to go to the settings panel.
4. Wi-Fi: Using this you can turn Wi-Fi On/Off.
5. Bluetooth: Using this you can turn Bluetooth On/Off.
6. Location: Using this you can turn On/Off location access and by long
pressing you can go for location setting directly.
7. Airplane Mode: Selecting this option activates the airplane mode, which
means it cuts you off from all kind of network connectivity including your
SIM network, Bluetooth, Wi-Fi network or any other network your handset
supports.
20
8. Data connection: Using this you can turn the data connection On/Off.
Data connection helps you access internet using your SIM network.
9. Data Usage: It provides a graphical representation of the data usage for
a specified Data Usage cycle through SIM Internet or Wi-Fi.
10. Audio Profiles: This option allows you to select the audio profiles out
of the 4 predefined profiles, general, silent, meeting and outdoor.
11. Brightness: Using this option you can change the brightness level of
the display screen according to your needs and usage.
12. Auto Rotation: Using this option you can select whether or not you
want to use the auto rotation option.
All the functions have been explained in details in their respective sections.
Note: On long pressing on these options you will be directed into settings
option from there you can operate further if you want to use more related
functions.
Touch and drag down the notification bar to access this shortcut.
21
1.5 Starting up the device
Power on/off
To power off your phone, press & hold POWER. On release, the Phone
options menu opens. Select „Power off‟ and confirm.
To power on again, press & hold POWER.
Silent mode
To silence your phone quickly, press & hold the – volume down button to
zero volume. Or on the Home screen, touch and select Settings > Audio
profiles. Select „Silent‟ check box.
Screen sleep
After a period of inactivity, your screen will go to sleep (display will turn
black). In sleep, your phone uses less battery power. You can control this
behavior:
Set screen timeout period
22
1. On the Home screen, touch and select Settings.
2. Select Display option.
3. Select Screen Time Out. Select a time from the menu.
Prevent sleep while charging
1. On the Home screen, then touch and select Settings.
2. Select Developer options.
3. Select „Stay awake‟ check box.
Lock screen & put phone to sleep
Except when on a phone call, from any screen, press POWER key
(immediately). While not on a call, to lock your control buttons and screen
from accidental touch activation, press POWER key.
You can increase the security of your phone by setting Screen unlock
pattern. Once set, in order to unlock your screen, you‟ll have to draw the
correct unlock pattern. You can set your screen unlock pattern as follows:
23
1. On the Home screen, touch and select Settings.
2. Select Security and then scroll down to Screen lock pattern section.
3. Set or change your unlock pattern by selecting Screen lock pattern, as
applicable.
4. Follow the prompts to define your pattern.
Note: You must slide your finger along the screen to create the pattern,
and not select individual dots. Connect at least four dots to create a lock
pattern.
If you want your pattern to be hidden as you draw it, clear „Make pattern
visible‟ check box.
1.6 Home screen
The Home screen is your starting point for using all the applications on your
phone. You can customize your Home screen to display applications,
shortcuts, and widgets as you like.
24
1. Touch the application tab with your fingertip to reveal the application
icons.
2. The Home screen actually extends beyond the screen width. On Home
screen, swipe your fingertip left and right along the screen to reveal the full
25
width of the Home screen. This additional space gives you more room to
customize Home with applications, shortcuts, and widgets.
3. Create Home screen shortcuts and widgets:
• Touch the application tab with your fingertip to reveal the application icons,
slide your fingertip right to show the shortcuts and widgets.
• Select an Application shortcut, a Shortcut to some of your saved
information (such as a play list), a Widget (a clock or picture frame) for your
Home screen.
• The application, shortcut, folder, or widget appears on Home screen.
Tip: To create an application shortcut quickly, touch the application tab to
reveal all the application icons, then touch & hold an application icon. Its
shortcut is added to the Home screen; close the application tab to see it.
4. To remove a shortcut or widget from your Home screen, touch & hold the
item to enter “move mode”. The application tab turns into a Trash button.
Drag the item to the Trash button and release. You‟ll know when your item
is in the Trash because the item and the tab will turn red.
5. Move objects on the Home screen
26
• To move an icon or other item on the Home screen, you must first touch &
hold it to enter move mode. The object will magnify when it is ready to be
moved.
• Without lifting your finger (or you‟ll drop out of move mode), drag the
object to the new position. To move an item to a section of the Home
screen not in view, move it to the edge of the screen and hold it there for a
moment. The screen view will shift; position the object and release.
1.7 Status Icons
Connection status icons
Along the top of your phone screen is the status bar. On the left side, icons
will appear, notifying you of a new message, upcoming calendar event, or
something else you should notice. On the right side of the status bar, you‟ll
see connection status icons.
Read your notifications
27
28
When you see a notification in the status bar, touch the bar and drag it
down the screen using your finger to open the list of notifications displayed
in the sliding window.
Ongoing notifications report activities such as call forwarding ON, current
call status, song playing.
Notifications report the arrival of new messages, calendar events, and
alarms. You can clear notifications list by selecting „Clear‟ notifications at
the top of the notifications window.
To open the message, reminder, or other notification, you can touch the
items. To close the notifications window, you can drag it upside.
Notes: On the home screen, touch the bar and slide your finger down the
screen to open the list of notifications displayed in the sliding window, you
can touch the icon on the top of the screen (such as Wi-Fi, Bluetooth, Data
connection, Airplane mode, Brightness) to open or close the selected
function, sliding your finger left or right to select more functions.
1.8 Using phone features
1. Turning the phone function on and off
29
To enable or disable Airplane Mode
In many countries, you are required by law to turn off the phone while on
board an aircraft. Another way to turn off the phone function is to switch
your device to Airplane Mode.
When you enable Airplane Mode, all wireless radios on your device are
turned off, including the phone function, Bluetooth, and Wi-Fi.
1. Touch -> Settings -> More Settings… -> Airplane mode.
2. Touch „Airplane mode‟ to enable or disable.
When you disable Airplane mode, the phone function is turned back on and
the previous state of Bluetooth and Wi-Fi are restored.
Adjusting the volume
Press Volume button on the side of the phone to show the volume screen.
If the phone is in vibrating mode, the voice will be muted automatically and
the device will vibrate when there is an incoming call.
30
2. Making a call
On Home screen, touch -> Phone to enter the dial screen.
31
Touch the on-screen dial pad to enter a number, To dial a number, touch
„Voice Call‟ button to select SIM1 card or SIM2 card to make a call. To end
a call, touch „END‟ button (Red icon).
1. Call log tab: Select an entry listed in the log to call the number.
2. Contacts tab: Contacts with phone numbers are listed. Select a contact,
and then select the phone number to dial the call.
Note: If you insert 2 SIM cards, the dial screen by default asks for the
dialing SIM. (Defined in the menu Settings/SIM management/Voice call)
2. The internet call is default closed (defined in the menu Settings/SIM
management/Voice call). If need to dial the internet call successfully, you
must open the Wi-Fi and add the account (defined in the menu Call
settings/Internet call).
Making a video call
Touch the on-screen dial pad to enter a number > Option >„Video Call‟
button to make a video call.
Notice: • SIM1 slot can be supported video call default (SIM1 card must be
supported 3G network).
32
• Your phone must be in of the normal WCDMA network coverage, and the
other side (the receiver‟s phone and SIM card) can also be supported the
video call function of 3G.
3. Answering and Ending a call
When you receive a phone call, the incoming voice call screen will appear,
allowing you to either answer or ignore the call.
1. To answer an incoming call, slide „ANSWER‟ (Green icon) button
rightward.
2. To reject a call, slide „REJECT‟ button (Red icon) button leftward.
4. In-call options
While on a call, reveal the in-call options: Speaker, Mute, Hold, End, Add
New call, Dial Pad.
Note that if Bluetooth services are on and you are connected to a handsfree device, the more menu indicator will show Bluetooth on.
33
1. Speaker: To use the speaker, select „Speaker‟ so it shows a Blue bar. To
turn it off, select it again so the bar is unfilled. The status bar will display
this icon when the speaker is on.
2. Mute: To mute your side of the conversation, select „Mute‟ so it shows a
Blue bar. To turn it off, select it again so the bar is unfilled. The status bar
will display this icon when Mute is on.
3. Hold: To put an active call on hold, select „Hold‟ so it shows a green bar.
To resume the call, or take the call off hold, select it again so the bar is
unfilled. If you take a call while already on a call, the first call will be placed
on hold automatically. The status bar will display this icon when a call is on
hold.
4. Add call: If you need to enter numbers while on a call, touch „Add call‟.
5. Incoming call: During call in progress, if you are on a call (“call in
progress”) when another call comes in (“incoming call”), you have a few
choices:
• Answer the incoming call and place the call in progress on hold. To switch
calls at any time, touch „Swap calls‟.
• If you don‟t want to interrupt your call in progress, then touch „END‟.
34
• If you have one call in progress and one caller on hold, to end both calls,
touch „End all‟.
6. While on a call, you can conference up to six callers, counting yourself.
Note that you can also have an additional caller on hold during a
conference call, regardless of how many participants are on the conference.
Dial Pad: You can use the dial pad while call.
Note: Whether the group call function can be used depends on whether the
network operator supports and provides such function as well as whether
you have applied for such function. Please contact network operator for
details.
5. Using call history
1. The missed call icon
missed a call.
appears in the notification bar when you
2. Use „Call log‟ tab to check who the caller was, or view all your dialed
numbers, and received calls. To open „Call log‟ tab, touch „Call log‟ button
in the phone screen to enter the call history list.
3. Scroll to select the contact or number you want to dial, touch „Call‟ button.
35
4. Tap and hold the selected contact you want to call, and then you can
make to do the following options of call, edit number before call, send text
message, add to contacts or remove from call log phone on the shortcut
menu.
6. Call settings
On the dialing screen or call log screen, press Option > Settings to enter
Call settings: You can make the operation of voice call, Video call, internet
call and the other settings.
Note that when you open „Call settings‟ for SIM1 or SIM2, your current
settings are fetched, which can take a few moments.
Voice Call
Voicemail: Select to set a voicemail number that isn‟t being read from the
SIM card.
IP prefix number: IP number setting to make an IP call with prefix number.
Call forwarding: Select how you want busy, unanswered, and unreachable
calls to be handled. There is also an option to Always forward.
36
Call barring: Restrict to answer or dial the call in any situation. You need to
apply to the network operator for opening the international long-distance
function and get network restricting code for barring setups.
Additional settings: From this setting you can set your Caller ID preference
and turn on/off call waiting.
Video Call
Local video replacement: You can set the picture display when your
camera is off
Display peer video: Display picture for replacing peer video when it is
unavailable.
Peer Video replacement: To set a picture for replacing a peer video when it
is unavailable.
Enable back camera: Available to switch Camera if turn ON.
Bigger peer video: Turn on to make peer video bigger than local video
Auto drop back: drop back to voice call connecting automatically
37
Outgoing Video calls: Display local video when make a video call.
Video Incoming call: Display local video when accept an incoming video
call.
Call forwarding: Forward the calls with Always forward, forward when busy,
Forward when unanswered and Forward when unreachable.
Call barring: it is availed for video calls with this features All Outgoing calls,
International outgoing calls, all incoming calls, Incoming call while in
roaming and Cancel all. You can also change the barring password.
Additional settings: From this setting you can set your Caller ID preference
and turn on/off call waiting.
Internet Call
You can place calls over the Internet when connected to a Wi-Fi network,
rather than over your mobile network. To do so, you must first configure
your phone to use the Internet to make a call.
To add an account and configure your incoming and outgoing
preferences:
38
1. Open the Phone app
2. Touch the Menu icon
on your device.
.
3. Touch Settings > Call settings>Internet Call.
To change your incoming call preference or account settings, enable
Use Internet calling, under "Internet call settings."
Place a call through the Internet:
After you set up the account, placing an Internet call is no different than
placing any other call. However, you must be connected to a Wi-Fi network.
Note: Calling a phone number over the Internet requires that your service
provider supports it. You may incur additional charges. Check with your
service provider for details.
Out call answer notification: Your phone vibrates when outgoing call is
answered.
Flip to mute: Turn over the phone to mute incoming call.
39
Smart Answer: Let the phone close to ear to answer the incoming calls
automatically.
Shake to Answer: You can answer incoming calls by shaking your handset.
Auto Call Recorder: Record all your important active call, which help you to
listen your conversation again.
Call Recorder Format: In this you can save the call recording in any of the
below mention format mp3, amr, 3gpp.
Dial from SMS Directly: If you reading a message then you let the phone
close to your ear then automatically dial the number in SMS.
Dial in Contact Directly: In the contact information page, let phone close to
your ear will dial the number automatically.
Other Settings:
Fixed Dialing Numbers: This feature allows you to restrict outgoing calls to
a fixed set of numbers. To enable this feature you must know the SIM PIN2
code for your phone. You can get this number from your wireless operator,
assuming this feature is supported.
40
Minute Reminder: The Small beep sound will remind you after very minute
while call is active.
SMS on Call Reject: Reject the Incoming call with the use of Message, the
common templates are already denied there in your phone
TTY mode: This tool allows deaf or hearing-impaired individuals to
communicate via the slide by typing text messages.
International dialing assist: The need for it is - in your phone book if you
have international phone number saved as "+ (country code) (city code)
(phone number)", that option will replace the "+" sign.
2. Contacts
The contacts on your phone are synced with your account contacts stored
on the Web.
To view the contacts on your phone, touch and select Contact.
Contacts belonging to a specific group (you can choose which group) are
listed in the Contacts tab. Only those contacts you star as “favorites” are
41
listed in the Favorites tab. Browse through your contacts by sliding your
fingertip up and down on the screen.
Another way to find a contact quickly is to use “SEARCH” button, input the
first letter of the name you‟re looking for and touch search icon, the
matching contacts are appeared on the screen.
From the Contacts tab, you can:
1. Take action on a contact: Touch the contact‟s name to open the context
menu. From the menu you can select to view the Contact details screen,
call the contact‟s number, send a text message, add or remove a star, edit
the contact details, or delete the contact.
2. Go to Contact details: Select the contact‟s name to open the Contact
details screen, where all screen the information you‟ve saved for this
contact is displayed.
Add a contact
1. On the Home screen, then touch and select Contact. Your contact list
appears.
2. Touch the + icon on the bottom of the screen to add new contact.
42
3. Add all the information you want to store for this contact in the
appropriate fields. You must add some information to save a contact. To
change a default label, select the label name to open the label menu.
Select a different label or create a custom label. To add more fields,
select „Add another field‟.
4. You can assign a Caller ID icon to your contact by touching Caller ID
icon. The Pictures application opens. Navigate to a picture and select it,
size the cropper with your fingertips. When finished, select „Crop‟. The
picture is associated with your contact. If you do not assign an icon, a
default android icon will be assigned.
5. To save your contact, press BACK, or touch „Done‟.
Assign favorites
Use Favorites as a way to display only those contacts you contact most
frequently. To add a contact to Favorites.
1. From Contacts, touch the contact you want to add to Favorites to open
the Contact details screen.
2. Touch the star icon on the right-top screen, and the color of star is
changed from White to grey.
43
3. Now your contact will be listed in Favorites.
Edit contact details
You can always make changes to the information you‟ve stored for a
contact:
1 From Contacts, touch the contact you want to add to Favorites to open
the Contact details screen.
2. Select „Edit‟. The Edit contact screen appears.
3. Make your changes, then press „Done‟.
Communicate with a contact
From Contacts you can quickly call or text a contact‟s default number, as
displayed below their name on the screen. However, to view all the
information you‟ve stored for a contact, and to initiate other types of
communication with that contact, open the Contact details screen. To open
a contact‟s details screen, simply select their name from Contacts.
44
1. Call a contact: From the contact list, touch the contact you want to open
the Contact details screen. Touch the call number directly to dial that
contact‟s primary number (first in the list on their details screen).
2. To dial a different number for the contact, select the contact‟s name, and
then select the number on their details screen and then touch the call
number that you want.
3. Send a text or multimedia: To send a text or multimedia message to a
contact, you must have a message to a contact mobile number stored for
them in contact details. From the Contact details screen, select a phone
number and click „Message‟ icon, A Compose screen opens for your new
message. Complete your message and select „Send‟.
4. Send email to a contact: To send an email message to a contact, you
must have an email address stored for them in their contact details.
• Select the contact you want to email. Their Contact details screen opens.
• In the Send email section, select the email address. If you are fetching
POP3 or IMAP email accounts to your phone, then select the account you
wish to use to send. A Compose screen opens for your new message.
• Complete your message, select „Send‟.
45
SIM contacts importer
If you have stored names and phone numbers on your SIM card, you can
add these to the Contacts stored on your phone by selecting this settings
option. From the contact list, press Option to select „Import/export‟, you can
select to import from SIM card or memory card, once the list of names and
numbers appears.
Import all names/numbers in the list – Press Option and select „Import all‟.
Import only certain names/numbers in the list - Select the name/number
you want to import, then repeat for others as you wish. (As soon as you
select the name/number, it is imported).
3. Messaging
46
SMS and MMS messaging
To open the SMS & MMS Messaging application, on the Home screen,
then touch and select the Messaging icon.
About text and multimedia messages
47
SMS messages are also known as “text” messages and can each be
around 160 characters. If you continue to type after the limit is reached,
your message will be delivered as one, but count as more than one
message. These are called “concatenated” messages.
MMS messages are also known as “multimedia” or “picture” messages and
can contain text, picture, audio, and video files.
When you compose a message, the phone will automatically convert a text
message into a multimedia message as soon as you add a subject or an
attachment, or if you address the message using an email address rather
than a phone number.
View the message from the message list
Select a message thread in the list to open it for reading. When open, the
individual messages appear stacked on the screen, much like with instant
messaging conversations (or chats).
Note that messages you send are also listed in the Read view.
1. Reading multimedia messages
48
If you have selected to auto-retrieve your multimedia messages, then both
the message header and body will download.
If you are downloading only the headers, then you must first select the
Download button to retrieve the message body. If you are concerned about
the size of your data downloads, you can check the message size before
you download.
Once the message has downloaded, select “Play” button to view the
message.
From a message read view, you can do the following:
1. To view details about a particular message, in the Read view, touch &
hold the message to open the context menu. Select View details.
2. Reply to a message: Simply start typing your message in the text box at
the bottom of the screen to reply to a message. You can always press
MENU and select to add a subject or an attachment to convert it to a
multimedia message. Select „Send‟ when ready.
3. Links in messages: If a message contains a link to a Web page, it will be
selectable. To view the Web page in the Browser, simply select it.
49
4. Delete messages: Your messages will be saved until you explicitly delete
them.
Delete one message in a thread - With the message thread open in Read
view, touch & hold the individual message you want to delete to open the
context menu. Delete all messages in a thread - With the message thread
open in Read view, press MENU >Delete. You can also delete an entire
thread from the message list by pressing & holding the thread to open the
context menu, then select „Delete‟.
Delete all message threads - From the message list, press MENU and
select delete all threads.
Compose text and multimedia messages
1. Touch „Compose‟ icon. The Compose screen opens.
2. Add recipients by typing a name, phone number, or email address in the
„To‟ field. Matching contacts will appear. Select the recipient or continue
typing. Add as many recipients as you wish. If you send the message to an
email address, the message will automatically convert from a text to a
multimedia message.
50
3. To add a subject, press MENU and select „Add subject‟. If you add a
subject, the message will convert to a multimedia message.
4. To add an attachment, touch „Attach‟ icon on the right-top of the screen.
Adding an attachment will always convert the message to a multimedia
message. Select from audio or picture files. You can select to take a new
picture if you want, or record an audio file.
Any recordings you make will be stored automatically in the Music
application in a play list named “My recordings”. To remove an attachment,
select the attachment‟s „Remove‟ button.
5. Type your message. As you type, you‟ll be able to track how many
characters/messages you‟re creating. Remember that text messages have
a limit around 160 characters. Once you go over that limit, a new message
is actually created but automatically joined into one when received.
6. Select „Send‟ when ready. You can also save a draft.
7. As your message sends, progress displays in the title bar. If you see this
icon to the right of the message, it means your message is still being
delivered.
Save message as draft
51
While composing, press BACK, your message automatically saves as a
draft.
Text and multimedia message settings
To set text and multimedia message preferences, from the message list,
press MENU and select „Settings‟. You can set the following from this
screen:
1. Notification settings
You can receive a notification each time you receive a new message.
Select „Notifications‟ check box to receive a notification in the status bar
when a new message arrives. If you want your phone to ring when a new
message arrives, select that check box as well. Select Ring tone to open
the ring tone menu and select a ring tone specific to new text and
multimedia message notifications. Note that when you check a ring tone, it
plays briefly.
If you want your phone to vibrate when you receive a new message, select
„Vibrate‟ check box.
Text message settings
52
Request delivery reports: To receive a report on the delivery status for each
of your message, select this check box.
Manage SIM card messages: Text messages can also be stored on your
SIM card. The exact SIM card number depends on your card, but it is
usually around 25-50. To view messages on your SIM card, delete them,
and copy them to your phone memory, select this setting.
3. Multimedia message settings
Delivery reports: To receive a report on the delivery status of your message,
select this check box.
Read reports: To receive a report on whether each recipient has read or
deleted the message without reading it, select this check box.
Auto-retrieve: To retrieve all your MMS messages automatically (the
header plus the message will download to your phone), select this check
box. If you clear this check box, then only the message headers will be
retrieved and display in your message list. You can retrieve the full
message by selecting the Download button that displays in the header.
Once the message has downloaded, select the “play” button to expand the
message.
53
Roaming auto-retrieve: If you are concerned about data traffic and just want
the message headers to download while roaming, clear the Roaming autoretrieve check box. Otherwise, you can select this check box to have your
messages download even while roaming.
4. E-Mail
7.1 Add an email account
54
You can fetch messages from up to five POP3 or IMAP
accounts. Follow these steps:
55
1. On the Home screen, then touch and select Email application.
2. The Set up new account screen appears.
3. Type your account email address and password.
4. If you want, select the Send email from this account by default check box.
This setting only applies if you have more than one POP3 or IMAP account
set up. (For this details please contact your IT support team)
5. Select „Next‟.
If you have a popular email account, the application will set everything up
for you! Before you go to your Inbox, you can name the account (if you
don‟t, your email address will be used). You are also asked to type your
name as you want it to display on outgoing messages. You must complete
this field before you can select „Next‟ and go to your Inbox.
For less popular accounts, follow the prompts to type the email server,
protocol, and other account information yourself. After your account
settings have been verified, select „Next‟ to go to your Inbox.
6. To add more accounts (up to five), from an Inbox or your Accounts
screen, press MENU and select „Add account‟.
56
7.2 Use your POP3 and IMAP email
account
Once you‟ve set up an account, you can do the following:
1. Refresh Inbox: From the Inbox, press MENU and then select „Refresh‟ to
update your Inbox with any previously-un-fetched email.
2. Read email: You can display or collapse the messages in your Inbox by
selecting Inbox. Unread messages display with a colored band. (Each
account you add will use a different color.)
3. Forward, Reply and Reply all: You can forward, reply, or reply all to an
email message from the Inbox. From the Inbox, touch & hold the message
to open its context menu. Select the action you want to take.
4. Compose new
From the Inbox: 1. Press MENU and select „Compose‟. 2. Add recipients by
typing a name or address in the „To‟ field. Matching contacts will appear.
57
Select the recipient or continue typing the address. Add as many as you
wish. 3. Type a subject and message.
5. Select „Send‟, „Save as draft‟, or „Discard‟. Pressing BACK will also save
as draft unless you have not typed anything.
6. Delete message
From the Inbox: 1. Expand the Inbox to display the messages. 2. Touch &
hold the message you want to delete. 3. Select „Delete‟. 4.Your message is
moved to the Trash.
7. Empty Trash: Once you‟ve moved a message to the Trash, to empty
messages in the Trash you must delete each message individually. Press
MENU and select „Folders‟ to enter the Trash.
Note that the message is only deleted from your phone, not from the
account server.
8. Remove an email account: You can always remove a POP3 or IMAP
email account from your phone. Go to your Inbox, press MENU and select
„Accounts‟. Your Accounts screen opens. Touch & hold the account you
want to remove to open the context menu.
58
Select „Remove account‟. You will be asked to confirm before the account
is removed.
Edit account settings
To open your Account settings screen, do the following:
1. From your account Inbox, press MENU and select „Account settings‟.
2. The Account settings screen appears. You can do the following from this
screen:
Account name: Select to change the name of your account as it appears on
your Accounts screen.
Your name: Select to change your name as it appears in outgoing email.
Email check frequency: Select this pop-up menu to set how frequently your
email account is checked for new messages. Note that whenever you open
a folder, email is refreshed, regardless of this setting.
Default account: If you have more than one POP3 or IMAP email account
set up on your phone and want to use this account by default when
selecting Compose from the Accounts screen, select this check box.
59
Email notifications: If you want an icon to appear in the status bar when a
new message arrives, select this check box.
Incoming server settings: Select Incoming settings if you need to edit the
username/ password, server, port, or option to delete email from server.
Outgoing server settings: Select Outgoing settings if you need to edit the
SMTP server, port and security type, option to require sign-in or
username/password.
Add another POP3 or IMAP
To add another account (you can add up to five), go to your Inbox, press
MENU and select „Accounts‟. Your Accounts screen opens.
Press MENU and select „Add account‟ another account.
5. Settings
Control phone-wide settings from the Home settings screen touch and
select Settings.
60
Wireless & networks
61
5.1 SIM management
You can select to activate or deactivate the SIM card you want to open.
Set the default SIM to use voice call, Video call, and messaging and data
connection.
5.2 Wi-Fi
Wi-Fi on/off: Select this option if you prefer to use Wi-Fi for your data
connection. You can activate Wi-Fi by toggling the switch left/right to On/Off
Wi-Fi connectivity.
Wi-Fi settings: Open the Wi-Fi settings screen. Select it from the network
list. Provide your username or password if required
Scan: To scan the available Wi-Fi networks.
WPS Pin Entry: Any wireless computer or wireless adapter that will
connect to the modem router wirelessly is a client. The client must support
a WPS PIN, and must have a WPS configuration utility.
62
Wi-Fi on/off: Select this option if you prefer to use Wi-Fi for your data
connection. You can activate Wi-Fi by toggling the switch left/right to On/Off
Wi-Fi connectivity.
Wi-Fi settings: Open the Wi-Fi settings screen. Select it from the network
list. Provide your username or password if required
63
Scan: To scan the available Wi-Fi networks.
WPS Pin Entry: Any wireless computer or wireless adapter that will
connect to the modem router wirelessly is a client. The client must support
a WPS PIN, and must have a WPS configuration utility.
Wi-Fi Direct: Using Wi-Fi direct feature, you can transfer data from one
device to another through Wi-Fi without the need of an access point.
Advanced: This option contains the following features:
Network notification: By default, when Wi-Fi is on, you receive
notifications in the Status bar when your device detects an open Wi-Fi
network. Uncheck this option to turn off notifications
Keep Wi-Fi during sleep: To conserve mobile data usage,
your device stays connected to Wi-Fi when the screen goes to
sleep.
Scanning always available: To improve location accuracy and for other
purposes, Google and other apps may scan for nearby networks, even
when Wi-Fi is off.
Install certificates: Here you can see and add your certificate.
64
Wi-Fi Optimization: To minimize the battery usage when Wi-Fi is ON.
Passpoint: Wi-Fi Passpoint enables the device to search for and connect
to a certified Wi-Fi network. You can use the Passpoint feature to connect
to public Wi-Fi networks that support automated authentication. When you
move to a new location it will search for and connect to another certified WiFi network.
Note:-This feature may not be available depending on the region.
Tap → Advanced, and then tick Passpoint.
MAC address: The Media Access Control (MAC) address of your device
when connected to a Wi-Fi network
IPv4 address: The Internet Protocol (IP) address assigned to
the device
by
the
Wi-Fi
network
you
are
connected to (unless you used the IP settings to assign it a static IP
address).
65
5.3 Bluetooth
Bluetooth on/off: Use this check box to turn Bluetooth services on or off.
Bluetooth settings: With Bluetooth services on, you can open the Bluetooth
settings screen to:
66
• Rename Phone:
1. Make sure you have turned Bluetooth on.
2. Select Settings > Bluetooth > Bluetooth settings > Device name.
3. Type the name for your device in the dialog box, and then select „OK‟.
4. Your new device name appears on the Bluetooth settings screen.
• Visibility timeout: Set the visibility time or you can select “never time out”.
• Show received file: You can get a path where you have received the file
through Bluetooth.
• Advance Settings
You will get the option of FTP server, Remote
• Pair or Unpaired with one of the Bluetooth devices in range - You will be
asked to type a PIN before pairing. Refer to the manufacturer‟s
documentation for the PIN code.
• Rescan for devices.
67
You can use Bluetooth to send and receive calls using a headset or handsfree car kit.
Turn on Bluetooth services
1. On the Home screen, then touch and select Settings.
2. Select Bluetooth, and then select „Bluetooth‟ check box to turn on
Bluetooth services.
3. When on, the Bluetooth icon appears in the status bar.
Discoverability
By default, your phone is not “discoverable”. This means other Bluetooth
devices will not see your phone in their scans for Bluetooth devices. If you
make your phone discoverable, it will be visible to other Bluetooth devices
for up to 120 seconds.
To make your phone discoverable:
1. Make sure you have turned Bluetooth on.
2. Select Settings >Bluetooth> Bluetooth settings.
68
3. Select „Discoverable‟ check box to make your phone visible to other
Bluetooth devices for 120 seconds. You must stay on the Bluetooth
settings screen to remain discoverable.
4. Select „Discoverable‟ again during the 120 seconds, or leave the
Bluetooth settings screen, to make your phone undiscoverable.
Pair & connect with Bluetooth devices
Before your phone can communicate with a Bluetooth headset or handsfree car kit, the devices must “pair”, then “connect”:
1. Make sure you have turned Bluetooth on.
2. Select Settings > Bluetooth > Bluetooth settings.
3. Your phone starts scanning for Bluetooth devices within range. As they
are found, the devices appear in the list of Bluetooth devices.
4. To pair with a device in the list, select it.
5. Type the device‟s PIN and then select „OK‟.
69
6. Once paired, select the device name to connect. You can also touch &
hold the name to open the context menu, and then select Connect.
7. Pairing and connection status appear under the device name.
8. Once the other Bluetooth device shows “connected” status, you can start
using it to make and receive phone calls.
9. To disconnect or unpaired with a device, touch & hold the device to open
the context menu. Select Disconnect or Unpaired, as appropriate. If you
select „Unpaired‟ when connected, you will be disconnected as well.
Note: The phone supports only the headset and hands-free Bluetooth
profiles, so if you try to connect to a device that is not a headset or handsfree car kit, then you will receive an “unable to connect” message.
If you pair with a second headset while connected to the first, the first
headset will remain connected. To switch connection to the second headset
you must manually select that headset again after pairing.
Rescan for Bluetooth devices
If you want to update the list of Bluetooth devices, select „Scan for devices‟.
70
Data usage
It provides a graphical representation of the data usage for a specified Data
Usage cycle through Mobile Internet or Wi-Fi.
Data usage refers to the amount of data uploaded or downloaded by your
device during a given period. Depending on the device and your wireless
plan, you may be charged additional fees when your data usage exceeds
your plan's limit. To monitor your data usage, adjust your data usage
settings. First check your plan and determine what data limits may apply.
Warning! The usage displayed on the data usage settings screen is
measured by your Slide. Your carrier's data usage accounting may differ.
Usage in excess of your carrier plan's data limits can result in steep
overage charges. The feature described here can help you track your
usage, but is not guaranteed to prevent additional charges.
Data usage settings allow you to:
Set the data usage level at which you'll receive a warning.
Set a data usage limit.
71
View or restrict data usage by app.
To adjust the settings described here:
Touch the Settings icon
on a Home or All Apps screen.
Touch Data usage.
By default, you see the settings for mobile data, that is, the data provided
by your network carriers.
5.4 More setting
Airplane mode on/off: When airplane mode is selected, all wireless
connectivity is off. This icon will display in the mode is selected.
72
Default SMS app: The system settings allow users to select a "default SMS
app." Once selected, only the default SMS app is able to write to the SMS
Provider and status bar when airplane only the default SMS app receives
the SMS. The default SMS
app is responsible for writing details to the SMS Provider when it receives
or sends a new message.
73
Tethering & portable hotspot: The device is used as a wireless modem for a
PC, when it‟s connected to the PC using a USB cable.
Using hotspot, you can share your mobile network with other Wi-Fi enabled
devices. You can connect and block the User.
Wi-Fi hotspot: Select the Wi-Fi networks which are mobile hotspots. Apps
can be restricted from using these networks when in the background. Apps
may also warn before using these networks for large downloads.
USB tethering: Tethering refers to connecting one device to another.
Tethering allows sharing the Internet connection of the phone or tablet with
other devices such as laptops. Sharing internet connection using USB
cable is called USB tethering.
Bluetooth Tethering: Tethering refers to connecting one device to another.
Tethering allows sharing the Internet connection of the phone or tablet with
other devices such as laptops. Sharing internet connection using Bluetooth
is called Bluetooth tethering.
VPN: VPN stands for Virtual Private Mode. Using this feature, you can
connect to your private network through a public network in a secured way.
You can add a VPN connection, customize it as per your requirement and
then save the settings. Once the network is created, select the network
again to connect to it.
74
Mobile networks: Select data roaming capability.
Data connection: Lets you select whether you want to keep the data
connection On/Off. If you want to activate it, which SIM do you want to use.
3G service: Whether you want to enable 3G service or not.
Access Point Names: You can create new APN for using internet facility on
your handset.
How do I perform my GPRS settings to activate internet?
The path to be followed to perform the GPRS settings in your handset is
mentioned below:
Main menu-->Settings-->More-->Mobile networks-->Access Point Names->Select the SIM on which you want to perform the settings-->select the
option for new APN.
(Please contact your SIM service provider for proper APN)
Network operators: Out of the available 2 network, which network do you
want to use.
75
USB internet: Using this function sharing windows PC internet via USB
cable.
Device
5.5 Audio profiles
There are four types of user profiles available, they are General, Silent,
Meeting and outdoor. Select one user profile and enter the following
options:
• Vibrate: Select to have your phone vibrate for incoming calls.
• Volumes: Select to open the volume control, and then drag your finger
along the volume bar to set an incoming call ring volume or alarm, playing
back music, videos.
• Voice/ Video ring tone: Select to decide on a ring tone to use for incoming
calls. Note that you can override this setting for individual contacts in the
Edit contact details screens.
76
•Default Notification sound: Select a ring tone to use for a notification (e.g.,
New message) Note that you can override this setting for new Calendar
event notifications, text and multimedia message notifications. Go to the
applications settings screens to select specific ring tones.
System sound: You can select the following 4 options also.
-Dial pad touch tones: You can select from here if you want the dial pad
touch tones to be activated.
-Touch sounds: You can activate this option if you want the touch tones to
be activated on your device.
-Screen lock sound: On activating this option the screen lock sound is
activated.
-Vibrate on touch: Selecting this will make your device vibrate with every
touch on the display
BeAudEnh & BesLoudness: Boosts the volume on the high and low ends of
the frequency band.
77
5.6 Display
Lock Screen Notification: It will show you a notification on Lock Screen.
Wallpaper: Select to choose the type of wallpaper you want on your home
screen. You can either select a picture from the gallery or download them
on your phone. You can select from one out of the available 4 options:
Gallery, Live Wallpapers, Photos, and Wallpaper.
Brightness: Select to open the brightness control, and then swipe your
finger along the brightness bar to set the level. In sunlight, increase the
level.
Auto rotate screen: Select the option if you want the screen to rotate when
the orientation of the phone is changed.
Screen Time out: Select to decide how long your phone must be inactive
before the screen turns off.
Daydream: You can select from the provided widgets to be displayed when
the screen is left idle for a long time.
Font Size: Select to choose the font size of characters on your screen.
78
5.7 Storage
View and manage the data storage on your phone.
Preferred install location: You can change here preferred install location for
new apps.
Memory card: Monitor and manage the use of your Memory card from this
screen:
1. View how much space you are using on your memory card.
2. Select to use your memory card as USB mass storage when your phone
is connected to your computer (selected by default)
3. Unmounts/eject your memory card from your phone. Note that when your
phone is connected to your computer via USB, you cannot view pictures or
play any media stored on the card from your phone.
Internal phone storage: Reports how much internal storage is free.
Notes: 1. The mobile phone may be used as a U disk, when we connect
the mobile phone to PC via USB cable; two removable devices are
79
detected in your My Computer. One of them is Phone memory & another is
your SD card storage.
2. The phone U-disk function to the actual configuration of the mobile
phone, please take to the actual mobile phone.
Erase Internal Storage: Through this you can erase all data of your internal
storage in single tap.
Mount SD Card: You can unmount the inserted SD card for safety purpose.
5.8 Battery
It gives you the current battery level, along with the distribution of battery
consumption by different apps.
Battery Percentage: You select this to view the level of battery in
Percentage on your Notification Bar.
Open Settings > Battery.
The list at the bottom of the screen shows the breakdown of battery usage
for individual apps and services. Touch a graph for more details. The
80
details screen for some apps includes buttons that allow you to adjust
settings affecting power usage, or stop the app completely.
Warning! : If you stop some apps or services, your device may not work
correctly. Battery status (charging, discharging) and level (as a percentage
of fully charged) are displayed at the top of the screen. The discharge
graph shows battery level over time since you last charged the device, and
how long you've been running on battery power.
5.9 Boot Acceleration
This option will select boot acceleration you can speed up your booting time.
In this option you can select the applications to disable or enable for the
boot acceleration.
5.10 Apps
Unknown sources: (Settings>Security) Select this check box if you want the
ability to download applications from the Internet.
81
With this check box not selected, you will only be able to download
applications from Android Market. To ensure your personal data and phone
remain secure; it is recommended you not select this check box.
Manage applications: View all the applications stored on your phone and
how much space they occupy. If you‟ve downloaded an application from
Android Market, you can uninstall it from this screen. Select a specific
application to:
1. Clear your user data (if you have any associated with a particular
application).
2. Disassociate the application with any actions.
3. Uninstall - If you‟ve downloaded an application from Android Market, you
will be able to uninstall it from this screen by selecting Uninstall.
Personal
82
5.11 Location Access
My Location: Select a source for determining your location: Wireless
networks, or GPS satellites. Typically GPS will be more accurate (to street
level) but it consumes more battery power.
High accuracy: Use GPS, WI-FI and Mobile networks to determine the
location
Battery saving: Use Wi-Fi and mobile networks to determine location.
Device only: Use GPS to determine your location.
5.12 Security
Screen Lock: Create a pattern you will be asked to draw before your screen
will unlock. You can select to make the pattern visible or invisible as you
draw it.
You can choose among these lock options, listed in approximate order of
strength:
83
Slide: It provides no protection, but lets you get to the Home screen quickly,
or open Camera and start.
Taking pictures immediately.
Face Unlock: Lets you unlock your phone by looking at it. This is the least
secure lock option.
Voice Unlock: You can speak out any particular word to lock/unlock the
screen. The voice while setting should be clear.
84
Pattern: Lets you draw a simple pattern with your finger to unlock the phone.
This is slightly more secure than Face Unlock.
PIN: Requires four or more numbers. Longer PINs tend to be more secure.
Password requires four or more letters or numbers. This is the most secure
option, as long as you create a strong password.
Important For best security, specify a password that is
A least 8 characters long.
Contains a mixture of numbers, letters, and special symbols.
Doesn't contain any recognizable words or phrases.
Enable widgets: After enabling this, you can easily add lock screen widgets
by simply swiping from left to right on the lock screen and then tapping the
+ symbol.
Owner info: The information of the owner can be stored and then can be
displayed on the lock screen.
Encrypt phone: The user can lock the phone with a password such that
whenever the phone is switched on, the user will have to decrypt the phone
with the same password.
85
Set up SIM card lock: Lock your SIM card for extra security. You can also
change your SIM card PIN from this screen. If you don‟t know your SIM PIN,
you can obtain it from your wireless operator.
Make passwords visible: Select to have your password display as you type
it.
Device Administrator: On selecting this option, you can either view or
deactivate device administrators.
Unknown Sources: On selecting this option, installations of non-Market
apps is enabled.
Verify apps: Some applications can harm you or your device. You can
choose to verify apps in order to help prevent harmful software from being
installed on your device.
Auto-start management: This will show the list of apps which are
automatically starts when phone boot up and you can deny manually to
start up automatically.
Trusted credentials: It displays the trusted CA certificates.
Install from SD card: Certificates can be installed from the SD card.
86
Clear credentials: On selecting this option, it removes all the certificates.
5.13 Language & input
Language: On selecting this option you can choose the required language
of the phone from the given list of languages.
Spelling Checker: On selecting this option you can turn on the spell check
feature on your phone.
Android keyboard: It‟s the default input method on your phone.
Google voice typing: On selecting this option, you can convert the voice
message into a text message.
Voice search: You can make Google Searches by giving a voice input.
Text-to-Speech output: It controls the rate at which the words are to be
spoken for the search engine to understand and provide a correct
translation into words.
Pointer speed: On selecting this option, you can control the pointer speed.
87
5.14 Backup & Reset
You can have a backup of the data present in your mobile on the Google
server using your Google Account.
Back up my data. If you check this option, a wide variety of your personal
data is backed up automatically, including your Wi-Fi passwords, Browser
88
bookmarks, a list of the apps you've installed from the Market app, the
words you've added to the dictionary used by the onscreen keyboard, and
most of your customized settings. Some third-party apps may also take
advantage of this feature,
So you can restore your data if you reinstall an app.
If you uncheck this option, your data stops getting backed up, and any
existing backups are deleted from Google servers.
Automatic restore: When reinstalling an app, restore backed up settings
and data. If you need to replace or factory reset your device, you can
restore your data for any accounts that were previously backed up.
DRM Reset: This operation to delete all the licenses on this devices.
Factory Data Reset: You can select to reset your phone to factory settings.
This will erase all your data from the phone and require you to sign in and
go through the set-up screens to use any of the applications.
ACCOUNTS
89
5.15 Add account
You can add new Gmail & personal web mail email account. You can add
your account of Email, Facebook, Google, Gtalk, WhatsApp, WeChat and
many more.
System
5.16 Date & time
According to the pre-set, system will voluntarily apply the date, zone, and
time provided by internet.
Manual set date, time and zone
• Automatic date & time: You can set your handset‟s date & time settings,
which can detect automatically by following option
• Automatic time zone: The time zone will detect automatically with this
option if you not select this, then you have to set the date & time with zone
manually.
90
• Click Date setting, then click upper or down button to adjust date, month,
and year, click setting when you finish selection.
• Click Time setting, then click upper or down button to adjust hour and
minute, click AM or PM to change morning or afternoon (there is no such
selection when you set 24-hour format). Click setting to finish.
• Click 24-hour format, switch between 12-hour or 24-hour format, the time
format you choose will be used on the alarm clock.
• Click date format setting, and then choose the time format you want to
show on iBall Andi 4P Class X.
5.17 Schedule power on/off
1. Click setting application procedure.
2. Click fixed-tine start up and shutdown.
You can set your Phone on schedule power, it will be Power off on set time
& you can also set the time for power it on.
91
5.18 Accessibility
These are certain special features which help people with certain
disabilities.
• Talk back: Using this function your device provide spoken feedback to
help blind & low vision user.
• Caption: To set global captioning preferences, such as whether to show
captions and what language, text size, and text style to use.
• Magnification gestures: Using this feature you can zoom in & out by triple
tapping the screen.
• Large text: The font size throughout the phone can be increased or
decreased for better view ability for the user.
• Power button ends call: Calls can be ended with the power button on
selecting this option.
• Auto-rotate screen: Check to have the screen rotate automatically when
you change the phone's orientation.
92
• Speak Password: Check to get spoken feedback while typing passwords.
• Accessibility Shortcut: When this feature is turned on, you can quickly
enable accessibility features.
• Text-to-speech output: The text is spoken for the user convenience.
• Touch & hold delay: Lets you adjust the delay required for the phone to
notice that you're touching and holding an item (for example, to move an
app to a Home screen).
5.19 Printing
To print your photos, documents, and more from your phone, check to see
if your printer‟s manufacture has an app on Google Play Store. Then touch
Apps -->Settings -->Printing to get started.
*Note: All the printers may not be compatible. Please contact your printer
manufacturer for details
93
5.20 Developer Options
Desktop backup password: Set a password to secure your backup data.
Stay Awake: Screen will never sleep while charging.
Enable Bluetooth HCL snoop log: Android 4.4: the ability to capture all
Bluetooth HCI packets and save them to a file.
Process Stats: These tools let you spot-check your app‟s memory use, but
Process Stats now gives you a broader, time-based view of your app‟s
behavior.
USB debugging: When you connect your phone to laptop/PC, the following
image will pop up on your screen, it will sync your phone with Laptop/Pc
through USB connectivity.
Revoke USB debugging authorizations: By this tool you can cancel or
revoke the USB debugging authorizations.
Allow mock locations: Allow mock location and service information to be
sent to a location manager service for testing.
94
Select debug app: Using this you can set a debug application.
Wireless display certification: Android 4.4 devices can now be certified to
the Wi-Fi Alliance Wi-Fi Display Specification as Miracast compatible.
Show touches: Set to show the pointer, when we touch the screen.
Pointer Location: Set the Co-ordinates & traces of the pointer when you
touch the screen.
Show surface updates: Flash entire window surfaces when they update.
Show layout bounds: Show clip, bounds, margins etc.
Force RTL layout direction: To make it easier to test and debug layout
mirroring issues without switching to an RTL language.
Window animation scale: The ratio by which the animation scale is applied.
Transition Animation Scale: To speed up transitions (and your phone‟s
reaction time), either turn off animations, or reduce the scale.
Animator duration scale: The ratio in which the animation scale is
measured.
95
Simulate secondary displays: Select one option out of the provided four.
Force GPU rendering: Use 2D hardware acceleration in application.
Show GPU view updates: Flash views inside window when drawn with the
GPU.
Show hardware layers update: Flash hardware layers green when they
update.
Debug GPU overdraw: It is tools that allow visualizing overdraw parts of the
screen where the app draws more than one time. Dark Red means that this
part of the screen is at least 4 different layers draw on top of each other.
Force 4x MSAA: Enable 4x MSAA in OpenGL ES 2.0 apps.
Disable HW overlays: Always use GPU for screen compositing.
Strict mode enabled: Flash screen when apps do long operations on main
thread.
Show CPU usage: Screen overlay shows the current CPU usage.
96
Profile GPU rendering: Measure rendering time in adb shell dump system
graphics info.
Enable Open GL traces: Asks you to enable or keep GL traces disabled.
Do not keep activities: Set to end a running application when you launch a
new application.
Background process limit: Set the standard limit of processes which run in
the background.
Show all ANRs: Show apps not responding dialog for background apps.
5.21 About iBall Mobile
View the model number and version information for your phone.
System updates: From here you will get system update if available.
Status: You will get the current status like Battery status, Battery level
Network, Signal
strength, Mobile network type, my phone number, IMEI,
IP address, Wi-Fi MAC address, Bluetooth address, Serial number & Up
time.
97
Legal information: You will get open source licenses & Google legal
information.
Model Number: It will show you model number of your handset.
Android version: It will show you current version of Android.
It will also show the Baseband version, Kernel version and Build number of
the handset.
6. Internet
Ways of Connecting to the Internet
Your device‟s networking capabilities allow you to access the Internet or
your corporate network through Wi-Fi, GPRS, and EDGE (if available).
You can also add and set up a VPN or proxy connection. (If required)
Wi-FiWi-Fi provides wireless Internet access over distances of up to 100
meters (300 feet). To use Wi-Fi on your device, you need access to a
wireless access point or “hotspot”. Note: The availability and range of your
98
device‟s Wi-Fi signal depends on the number, infrastructure, and other
objects through which the signal passes.
Browser
To open the Browser, touch and select Browser icon.
99
The Browser always opens to the last Web page you were viewing. The
first time you enter the Browser after powering on, your home page will
display.
You can change your home page by pressing MENU > Settings >General >
Set homepage.
Zoom and navigation in Web pages
While viewing a Web page, you can press MENU and select
Settings >Advanced >Default zoom to set the zoom controls.
Swipe your fingertips in any direction to shift your page view.
The Browse screen
From the Browse screen you can do the following:
1. Go to a Web page: Make sure the focus is not on a text box and then
start typing the URL.
2. Add a bookmark: Bookmark the Web page you are currently viewing:
• Press MENU and select „Save to bookmarks‟.
100
• Confirm the URL and name, and then select „OK‟.
To view all your bookmarks, press MENU and select Bookmarks.
3. Refresh a Web page: To refresh the contents of the current page, press
MENU and select „Refresh‟.
Open pages in separate windows
You can keep more than one Web page open by using multiple windows to
display the pages. You can open up to eight windows.
Open a new window: From a Web page, press MENU and select „Windows‟.
The Current windows screen opens, showing the Web page you started
from, plus a “new window”. Select „New window‟. Your home page opens in
a new window. To return to one of the other windows, press MENU and
select „Windows‟. Select the page you want to view.
Manage bookmarks
You can store as many bookmarks as you want on your phone.
Press MENU and select „Bookmarks‟. The Bookmarks screen opens.
101
1. Bookmark any page: Select „Add‟. Type a name and location (URL) in
the dialog box. Select „OK‟.
2. Send bookmarked page‟s URL: Touch & hold the bookmark you want to
open. The context menu opens. Select „Share link‟. An email Compose
screen opens with the URL as the message. Address your message and
finish composing and select „Send‟.
3. View bookmarked page: Touch & hold the bookmark you want to open.
The context menu opens. Select View page or Open in new window.
4. Edit bookmark: Touch & hold the bookmark you want to e open. The
context menu opens. Select „Edit bookmark‟. The edit bookmark dialog box
opens. Type your change and select „OK‟.
5. Delete a bookmark: Touch & hold the bookmark you want to open. The
context menu opens. Select „Delete bookmark‟. You will be asked to
confirm.
6. Bookmark current page: Go to a Web page you want to bookmark. Press
MENU and select „Bookmarks‟. The Bookmarks screen opens. Press
MENU and select Bookmark last-viewed page. The Bookmark link dialog
box opens. Confirm or edit the information, then select „OK‟.
102
Set your home page
You set your home page from the Settings screen:
1. Press MENU and select More > Settings. The Settings screen opens.
2. In the Page content section, select „Set home page‟ to open the dialog
box.
3. Type the URL of the page you want to set as home, and then select „OK‟.
Download Web files and applications
Before you download any files or applications using the Browser, note the
following:
1. Before you can download Web applications, you must explicitly “allow”
downloading from the Home > Settings screen:
On the Home screen, then press and select Settings. Select „Security‟, then
select „Unknown sources‟ check box.
103
2. All items downloaded from the Web are stored on your memory card, so
be sure you have a card installed in your phone before you download from
the Browser.
3. The Browser will only allow you to download items that are supported by
an application installed on the phone.
Warning! Applications downloaded from the Web can be from unknown
sources. To protect your phone and personal data, only download
applications from sources you trust, such as Android Market.
Camera & Picture
All the pictures you can capture or view on your phone are stored on
memory card, which must be installed in your phone. Before you can use
the Camera or view pictures in Pictures, make sure you have a card
installed.
Load pictures onto your memory card
Read the instructions below to add pictures to your Memory card or the
phone storage.
104
1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your
computer.
2. On your computer, find the mounted USB drive and open it.
3. Create a folder at the top-level called “Pictures” or some other
descriptive name and open it.
4. Copy .jpg or other image files into this folder. To organize pictures into
albums that will display in the Pictures application, create a folder and copy
pictures there for each album you want to display.
5. When finished, close the USB drive window and eject the drive as
required by your computer's operating system.
105
7. Multimedia
7.1 Camera
106
Panorama View
Normal mode
Colour effect
White balance
Face Detection
GPS location
Anti-Flicker
Exposure
HDR capture
Picture size set by camera
ISO
Self-Timer
All the pictures you can capture or view on your phone are stored on
memory card, which must be installed in your phone. Before you can use
the Camera or view pictures in Pictures, make sure you have a card
installed.
Load pictures onto your memory card
Read the instructions below to add pictures to your Memory card or the
phone storage.
107
1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your
computer.
2. On your computer, find the mounted USB drive and open it.
3. Create a folder at the top-level called “Pictures” or some other
descriptive name and open it.
4. Copy .jpg or other image files into this folder. To organize pictures into
albums that will display in the Pictures application, create a folder and copy
pictures there for each album you want to display.
5. When finished, close the USB drive window and eject the drive as
required by your computer's operating system.
Take a picture
Captured pictures are saved to the “DCIM” folder on your memory card or
the phone.
Tip: Before you take a picture, wipe the sensor window (on the back cover)
to remove any small amounts of oil.
108
1. To open the Camera, on the Home screen, touch and select Camera
icon.
2. The Camera opens in capture mode. Frame your picture within the
screen and hold the phone steady. Touch Camera button to capture.
Continue to hold the camera steady for a second after you hear the shutter
sound.
3. Immediately after capture, you can select to Save, Set as (contact icon
or wallpaper), Share (via a compatible application), or Delete your picture.
4. If you select to save, set as, or share, your picture is saved to Gallery
application.
View your pictures
To view the pictures you‟ve captured, as well as any you‟ve stored on your
memory card or the phone storage, go to Gallery application:
1. To open Pictures, on the Home screen, touch and select Gallery icon.
2. Depending on how many pictures you‟ve stored, they may take a few
minutes to load.
109
3. If you‟ve stored your pictures in folders on your Memory card, then the
folders will display as separate “albums”. The top left album always
contains all the pictures in all the albums.
4. The individual pictures display in a grid in thumbnail format. You can
select to display smaller or large thumbnails in Settings.
5. To open a picture in full-screen view, touch the picture. Once in fullscreen, select the arrows to scroll through the pictures within that album. If
the arrows disappear, touch the picture again to reveal the arrows and
zoom controls.
6. When image open full screen, click on icon to edit image like, color
change, add frame on image, crop image, mirror effect, adjust brightness &
more.
Picture options
You can do the following while in Pictures. Note: In all the instructions
below, you can touch & hold a picture to open the context menu to access
all actions, rather than open the picture in full-screen view.
1. View full-screen: Select a picture to open it in full-screen view.
110
2. Share a picture: In full-screen view, press MENU and select Share.
Select to share your picture via Messaging (MMS), or another application (if
you have another application installed on your phone that supports sharing).
3. Set as wallpaper: In full-screen view, press MENU and select set as.
From the menu that opens select Wallpaper. Touch & hold an edge of the
cropper to reveal the sizing arrows, then drag the edge in or out to size.
Touch & drag the center of the cropper to move it within the picture. When
you‟re happy with the cropped area, select „Save‟.
4. Set as contact picture: In full-screen view, press MENU and select set as.
From the menu that opens, select Contact icon. Your contact list opens.
Select the contact you want to associate with the picture. Touch & hold an
edge of the cropper to reveal the sizing arrows, then drag the edge in or out
to size. Touch & drag the center of the cropper to move it within the picture.
When you‟re happy with the cropped area, select „Save‟. The picture will
now appear in the Contact details screen, as well as on any incoming call
notifications.
5. Crop picture: In full-screen view, press MENU and select More > Crop.
Touch & hold an edge of the cropper to reveal the sizing arrows, then drag
the edge in or out to size. Touch & drag the center of the cropper to move it
within the picture. 3 When you are happy with the cropped area, select
111
„Save‟. Select Discard to cancel the crop. The cropped picture is saved to
Pictures as a copy.
Your original is not touched.
6. Rotate picture: In full-screen view, press MENU and select Rotate.
Select from Rotate left (counter-clockwise) or Rotate right (clockwise). Your
picture rotates and is saved automatically.
7. Delete picture: In full-screen view, press MENU and select Delete.
The picture will be removed from the Memory card after you confirm.
8. View picture details: In full-screen view, press MENU and select More >
Details. The picture details window opens. You can see the title, resolution,
file size, and date of the picture.
112
7.2 Music
To open your music Library, on the Home screen, touch and select the
Music icon. Your music is organized into five categories: Artists, Albums,
Songs, and Playlists & Folders. Select a category to view the lists within
each. Once in a category, keep selecting until you reach the music you
want to play.
113
For example, if you select the Artists category, you will see a list of artists in
A-Z order. If you select an artist, the list opens to display that artist‟s
albums. Select an album, and the album‟s song list displays.
Load music onto your Memory card
All the music you can listen to on your phone is stored on memory card.
Read the instructions below to add music to your memory card.
1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your
computer; or, attach your phone to your computer using a USB cable that
came in the box. If you use this method, make sure the Home > Settings >
Storage > SD card is selected.
2. On your computer, find the mounted USB drive and open it.
3. Although your phone will find all music files on your memory card, it‟s
advisable to keep the number of files or folders at the root level to a
minimum. So, if you wish, create a folder at the top-level called “music” (or
whatever you want) to store your files.
114
4. Open this folder and copy music files into it. If you want, create folders
within “music” to organize your music further. If you want to use certain
music files as phone, notification, or alarm ring tones.
Note: If you do not want a ringtone to appear in your music Library but you
do want it to be available as a ringtone, and then create the “ringtones”,
“notifications”, or “alarms” folder outside your “music” folder.
5. When finished copying, close the USB drive window and unmounts or
eject the drive as required by your computer's operating system. Remove
the USB cable from your phone and computer.
Play back music
At any level in your Library, touch & hold a listing (a song, artist, album, or
playlist) to open the context menu. Select Play to begin play and go to the
Playback screen. You can do the following using the Playback screen:
1. Shuffle songs: Shuffle plays songs in random order. Touch to toggle
shuffle on and off. When the con is grey, shuffle is off.
2. Repeat mode: Touch to step through repeat modes: repeat all songs,
repeat current song, don‟t repeat (grey icon).
115
3. Go to any point in song: Swipe fingertip in progress bar to desired point
in a song.
4. Playback control: From left to right icons: Go to beginning song, Pause/
resume play and Go to next of song.
If a song is playing while you are on the Library screen, you can switch to
the Playback screen quickly by selecting the lower song bar.
Playlists
You can create as many playlists as you wish. Note that the “Recently
added” playlist is a system playlist and cannot be deleted or renamed. Also,
if you make any voice recordings as part of a MMS message, they will be
stored automatically in a playlist called “My recordings”.
• Create a playlist on your phone
1. From the Library, select a category. From the list that appears, navigate
to the artist, album, or song that you want on a playlist.
2. Touch & hold the artist, album, or song to open the context menu.
3. Select Add to playlist.
116
4. In the Add to playlist menu that opens, select New to create a new
playlist, or one of the existing playlists.
5. The song(s) are added.
• Manage your playlists
Go to the Library screen and select „Playlists‟. All your playlists appear.
Touch & hold the playlist to open the context menu. You can do the
following from this screen: Play, Edit (rearrange songs), Delete and
Rename.
Create ring tones from songs
You can set any of your songs as a phone ring-tone:
1. From the Library, navigate to a song you want to use as a phone
ringtone.
2. Touch & hold the song in the list to open the context menu.
3. Select Use as ringtone. The ringtone is set as your default incoming call
ringtone.
117
4. Now, when you go to Home > Settings > Audio profiles, and select a
phone ringtone, your song will be listed as an option.
Delete music from memory card
All the music you play on your phone is stored on the inserted memory card.
From your phone, you can delete music stored on the card:
1. From the Library screen, select the Artists, Albums, or Songs category.
2. Go to the screen that shows the artist, album, or song that you want to
delete.
3. Touch & hold the item to open the context menu.
4. Select „Delete‟. You will be asked to confirm that you want to delete the
item from your memory card.
7.3 FM Radio
This device supports FM Radio. You can search and auto save channels.
Also, FM recording function is present. You can record your favorite songs
118
to listen later. The saved songs will be present in the folder FM records.
Note: Within doors or shielded environment, the receiving effect of radio
may be affected. You can improve the effect in the following ways: Near
window, adjust the position of earphone cable or adopt manual adjustment.
119
7.4 Sound record
The phone can be used as a sound recorder.
120
8. Others
8.1 Calendar
Calendar views
You can view multiple calendars on your phone, so each calendar event is
coded with a color.
You can view your calendar in a variety of ways. Touch the date on the lefttop of the screen to select from Day, Week, Month or Agenda.
1. Month view
Days are shown in a month grid. Busy time slots are shown as vertical bars
in the corresponding part of the day. An all-day event is shown as a small
vertical bar at the top of the slot (it does not fill the entire slot).
View event details - Select a day to view all the events in that day. This will
take you to either the Agenda or Day view, depending on which you last
visited. Select the event to view its details.
121
Edit an event - First select a day to go to either the Day or Agenda view.
From there, select the event to view its details. Assuming you have write
privileges on an event, touch and hold the event and select „Edit event‟ to
open the event for editing. Navigate months.
- Slide your fingertip up/down, through the days and past the beginning/end
of the month to move to the previous/next month.
Create new event- Touch & hold a day to open the context menu. Select
„New event‟. You can also press MENU and select „New event‟.
2. Event
Events in the current month are shown vertically in a list, one event after
the other. Days with no events are not displayed.
Repeating events - Marked with icon following the time or date.
View event details - Select the event to view its details.
Edit an event - First, select the event to view its details. Assuming you have
write privileges on an event, touch and hold the event and select „Edit event‟
to open the event for editing.
122
Navigate within the current month - Swipe your fingertip up/down.
3. Week view
Days are shown vertically within the Week view. Time slots are defined
horizontally in rows. Events are shown as blocks.
View event details - Highlight an event to open a small pop-up window in
the lower part of the screen that provides more event information. This
window will stay open for three seconds. (Note that highlighted events are
outlined in orange.) To view the full event details, touch the pop-up window
while it‟s open, or select the event itself. You can also touch & hold the
event to open the context menu, then select „View event‟.
Edit an event - Assuming you have write privileges on an event, touch and
hold the event to open the context menu, then select „Edit event‟.
Navigate within the current week -Slide your fingertip up/down.
Navigate to a past or future week - Slide your fingertip left/right.
4. Day view
123
Days are divided into hour time slots. Events are shown tiled and span the
time they last. All-day events are displayed at the top of the day list.
View event details - Highlight an event to open a small pop¬up window in
the lower part of the screen that provides more event information. This
window will stay open for three seconds. (Note that highlighted events are
outlined in orange.) To view the full event details, touch the pop-up window
while the pop-up window is open, or select the event itself. You can also
touch & hold the event to open the context menu, then select View event.
• Edit an event - Assuming you have write privileges on an event, touch and
hold the event to open the context menu, then select Edit event.
• Navigate within the current day - Swipe your fingertip up/down.
• Navigate to a past or future day - Swipe your fingertip left/right.
Create new event - Touch an empty time slot to open the new Event details
screen.
Create an event
From any of the views, press MENU and select „New event‟ to open the
new Event details screen.
124
• Type the information in the fields.
• Select date & time.
• Name that appears in Day view.
• Description can be as long as you like.
• Select a calendar if you display more than one.
• Set a default reminder time.
• Set online presence: available or busy.
• Select calendar privacy from Default (as defined when calendar was
created), Private, or Public.
When finished, select „Done‟. Pressing BACK also saves the event.
Tip: Create an event quickly in the Day or Week view by selecting an empty
time slot. A new Event details screen appears. The „From‟ field contains the
selected time slot.
Edit an event
125
To edit an event, you must have the View event screen open and you must
have created, or have write privileges, for the event.
1. Navigate to the View event screen.
2. Touch and hold the event and select „Edit event‟. If Edit event isn‟t an
option, then you cannot make any changes to that particular event.
Note: If your event repeats, you will be asked to choose which events you
want changed (only the current one you‟re editing, all events in the series,
or the current event plus future events).
3. Once you have finished your edits, select „Done‟.
4. To delete the event, from the View event screen, press MENU and select
„Delete event‟.
• Calendar settings
From any of the calendar views, press MENU and select Settings.
1. Calendar view setting
126
Hide declined events: Select this check box if you want all the events you
decline to be hidden from all calendar views.
2. Reminder settings
Set alerts & notifications: Select to set the type of event reminder you want:
• Alert - A dialog box will appear to remind you of the event.
• Status bar notification - An icon appears on the left side of the status bar.
• Off - You will receive no reminder.
Select ring tone: Select Ring tone to open the ring tone menu and select a
ring tone specific to new event notifications. Note that when you check a
ring tone, it plays briefly.
Vibrate: Select this check box to have your phone vibrate when you are
reminded of an event.
Default reminder time: Select to open the default reminder menu. The time
you select will appear by default in the Reminder section when you create a
new event.
127
8.2 Alarm Clock
To open Alarm Clock, on the Home screen, then touch and select Clock
icon. The Alarm clock offers as many alarms as you want.
Set an alarm
128
Three alarms are set up for you, ready to customize. All two alarms are
turned off by default. Select the check box to turn on the alarm. If no day
shows under the set time, the alarm will go off once when the set time is
reached.
This alarm will go off at 9:00 am every Tuesday and Friday.
To begin, select one of the default alarms to open Alarm settings.
Set the following options:
Alarm: Select the check box to turn alarm on (checked) or off (cleared).
This is the same check box that appears on the main Alarm.
Clock screen.
Time: The time the alarm will go off is shown. To change this time, select
Time to open the time selector. Slide the finger up or down to set the time
you want, and then select Set.
Repeat: The current repeat selection is shown. To change the setting,
select Repeat and make a selection from the menu. To have your alarm will
only go off once at the set time, don‟t select any of the options. A one-time
129
alarm is shown on the Alarm Clock screen without any days under the set
time.
Ring tone: The current ring tone selection is shown. Select Ring tone to
pick another ring tone that will play when the alarm rings.
(When you select a ring tone, it plays briefly.) Note that when your alarm
goes off, the ring tone will play a maximum of five minutes.
Vibrate: Select this check box to have your phone vibrate when it goes off.
Once your alarm goes off, you will receive an alert with the options to
Snooze (for 10 minutes) or Dismiss.
Add more alarms
To add more than three alarms, from the main Alarm Clock screen, press
MENU and select „Add alarm‟.
Change clock display
You can change the appearance of the clock displayed on the main Alarm
Clock screen:
130
1. Go to the main Alarm Clock screen.
2. Touch the clock with your fingertip to open the Clock selection screen.
3. Swipe your fingertip horizontally along the bottom clock face row and
touch the face you want to display.
Change date & time display
You can change the format of the time displayed in your alarms from the
global Settings screen:
1. Go to the main Alarm Clock screen. On the Home screen, then touch
and then press MENU and select Settings. Scroll down and select „Date &
time‟. The Date & time settings screen appears.
2. Use the network-provided values by selecting „Automatic‟ check box.
3. Select „Use 24 hour format‟ check box if you wish to use that rather than
12 hour format.
4. Select „Select date format‟ option to open the menu of various date
formats.
131
8.3 Calculator
To open Calculator, on the Home screen, then touch and select the
Calculator icon.
132
The Calculator offers two panels: basic and advanced. Switch back and
forth between panels by pressing MENU and selecting
„Advanced panel‟ or „Basic panel‟, as you wish.
Calculator panels
Two calculator‟s panels are available: basic and advanced. Use the Basic
panel to enter numbers and perform basic addition, subtraction,
multiplication, and division. Use the Advanced panel to insert advanced
operators or delimiters, such as sine, cosine, tangent, square root,
parentheses, etc.
Switch back and forth between calculator panels by pressing MENU and
selecting „Advanced panel‟ or „Basic panel‟, as you wish.
As soon as you select an advanced operator, the panel switches back to
Basic, where your operator appears. When you touch a key on the screen,
the key flashes red to let you know the selection was made. Make sure you
see the red flash before entering your next number or completing the
operation.
To delete numbers, one at a time, touch CLEAR on the screen.
133
To clear your operation history, press MENU and select „Clear history‟.
8.4 File Manager
File Manager is an application which provides you easy access to all your
media files, images, documents present in your phone and in your SD card.
134
You can create, view, share, and delete, copy, paste files on your phone
using this application.
9. Applications
9.1 Maps
Google Maps is a built-in app which helps you find a location, the distance
to that location from your current location, and the directions to that location.
Enter a keyword for the location and select to search for a location.
9.2 Hangouts
Stay in touch with your favorite one, Hangout provides you video, voice,
text chat support. Enjoy the chat.
135
9.3 Play movies & TV
According to Google, there are thousands of Movies & Television shows
available on Google Play Movies & TV, some in HD, including comedy,
drama, animation, action and documentary. Movies can be rented or
purchased and watched on the Google Play website or via an application
on an Android device. Some titles are only available for rental, some only
for purchase, and others for both rental and purchase. TV shows can be
purchased by episode or season but cannot be rented. Alternatively, users
can download movies and TV shows for offline viewing and view them later
using the Google Play Movie app.
9.4 Play Store
Use this application to purchase and download applications and games that
are able to run your handset.
Tap on Play Store application
136
Installing Applications:
Browse the play store & search the require contents with keywords. Select
an application tap the price & follow on screen instructions to complete the
purchase process.
When a new version available for any installed application, an update icon
appears at the top of the screen to alert you to the update. Open the
notification panel and tap the icon update the application.
9.5 YouTube
Use this application to watch videos from the YouTube website.
Tap YouTube on the Applications screen. This application may not be
available depending on the region or service provider. Watching videos Tap,
and then enter a keyword. Select one of the returned search results to
watch a video.
137
9.6 Play Music
Google introduced Play Music with a music store. The three major label
partnerships announced were with Universal Music Group, EMI and Sony
Music Entertainment along with other small labels. According to Google,
there are hundreds of free songs in Google Play and millions available for
purchase. Users can also upload up to 20,000 of their songs to the service
for free. The service allows the user to automatically create a playlist of
"songs that go well together" using a feature known as Instant Mix. Music
and playlists imported to Google Play music can not alter playlists in other
music program libraries, while changes in other applications are reflected in
the Google Play music library.
10. Troubleshooting
1. When you turn on your device or while you are using the device, it
prompts you to enter one of the following codes:
138
• Password: When the device lock feature is enabled, you must enter the
password you set for the device.
• PIN: When using the device for the first time or when the PIN requirement
is enabled, you must enter the PIN supplied with the SIM or USIM card.
You can disable this feature by using the Lock SIM card menu.
• PUK: Your SIM or USIM card is blocked, usually as a result of entering
your PIN incorrectly several times. You must enter the PUK supplied by
your service provider.
• PIN2: When you access a menu requiring the PIN2, you must enter the
PIN2 supplied with the SIM or USIM card. For details, contact your service
provider.
2. Your device displays network or service error messages:
• When you are in areas with weak signals or poor reception, you may lose
reception. Move to another area and try again.
• You cannot access some options without a subscription. Contact your
service provider for more details. The touch screen responds slowly or
improperly
139
3. If your device has a touch screen and the touch screen is not
responding properly, try the following:
• Remove any protective covers from the touch screen. Protective covers
may prevent the device from recognizing your inputs and are not
recommended for touch screen devices.
• Ensure that your hands are clean and dry when tapping the touch screen.
• Restart your device to clear any temporary software bugs.
• Ensure that your device software is upgraded to the latest version.
• If the touch screen is scratched or damaged, take it to your local iBall
Service Centre.
4. Your device freezes or has fatal errors:
If your device freezes or hangs, you may need to close programs or reset
the device to regain functionality
You can also perform a factory data reset. On the Applications screen, tap
Settings → Accounts → Backup and reset → Factory data reset → Reset
device →Erase everything.
140
5. Calls are being dropped:
When you are in areas with weak signals or poor reception, you may lose
your connection to the network. Move to another area and try again.
6. Outgoing calls are not connected:
• Ensure that you have pressed the Dial key.
• Ensure that you have accessed the right cellular network.
• Ensure that you have not set call barring for the phone number you are
dialing.
7. Incoming calls are not connected:
• Ensure that your device is turned on.
• Ensure that you have accessed the right cellular network.
• Ensure that you have not set call barring for the incoming phone number.
8. Others cannot hear you speaking on a call:
141
• Ensure that you are not covering the built-in microphone.
• Ensure that the microphone is close to your mouth.
• If using a headset, ensure that it is properly connected.
• If the Mic is not working, take it to your local iBall Service Centre.
9. Audio quality is poor:
• Ensure that you are not blocking the device‟s internal antenna.
• When you are in areas with weak signals or poor reception, you may lose
reception. Move to another area and try again.
10. When dialing from contacts, the call is not connected:
• Ensure that the correct number is stored in the contact list.
• Re-enter and save the number, if necessary.
• Ensure that you have not set call barring for the contact‟s phone number.
11. Your device is hot to the touch:
142
When you use applications that require more power or use applications on
your device for an extended period of time, your device may feel hot to the
touch. This is normal and should not affect your device‟s lifespan or
performance.
12. Error messages appear when launching the camera:
Your device must have sufficient available memory and battery power to
operate the camera application. If you receive error messages when
launching the camera, try the following:
• Charge the battery or replace it with a battery that is fully charged.
• Free some memory by transferring files to a computer or deleting files
from your device.
• Restart the device. If you are still having trouble with the camera
application after trying these tips, contact your nearest iBall Service Centre.
13. Error messages appear when opening music files:
Some music files may not play on your device for a variety of reasons. If
you receive error messages when opening music files on your device, try
the following:
143
• Free some memory by transferring files to a computer or deleting files
from your device.
• Ensure that the music file is not Digital Rights Management (DRM)protected. If the file is DRM-protected, ensure that you have the appropriate
license or key to play the file.
• Ensure that your device supports the file type.
14. Another Bluetooth device is not located:
• Ensure that the Bluetooth wireless feature is activated on your device.
• Ensure that the Bluetooth wireless feature is activated on the device you
wish to connect to, if necessary.
• Ensure that your device and the other Bluetooth device are within the
maximum Bluetooth range (10 m).
If the tips above do not solve the problem, contact your nearest iBall
Service Centre.
15. A connection is not established when you connect the device to
computer:
144
• Ensure that the USB cable you are using is compatible with your device.
If you want to connect your device for the purpose of mass storage you do
not require any drivers.
• You need drivers for debugging and it will work with Windows Vista and
Windows 7 Professional version.
16. My internet connection on SIM is not working properly:
There can be various reasons for why the internet connection over your
SIM is not working properly. The speed depends a lot on the network
conditions. If the network is not proper then the internet browsing speed will
vary accordingly. Also, make sure that 3G network for your network
operator is available in your area. Check your internet settings and make
sure they are correctly configured.
145
Ver.: 1.0.0
www.iBall.co.in
146
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement