Sanyo SCP-3800 User manual

Sanyo SCP-3800 User manual

USER GUIDE

1AH6P1P0666--

Printed in Malaysia

SCP-3800NZ Cover

SCP-3800

Table of Contents

1. Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . .9

Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . .11

Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Navigating Through the Menus . . . . . . . . . . . . . . . . . . . .14

Displaying Your Phone Number . . . . . . . . . . . . . . . . . . .15

Making and Answering Calls . . . . . . . . . . . . . . . . . . . . .15

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

4. Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . .32

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Browser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Phone Information Management . . . . . . . . . . . . . . . . . .49

5. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . .50

Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . .50

Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . .52

Deleting Phone Content . . . . . . . . . . . . . . . . . . . . . . . . .53

Resetting Phone Content . . . . . . . . . . . . . . . . . . . . . . . .54

Lost or Stolen Phones . . . . . . . . . . . . . . . . . . . . . . . . . .54

Security Features for Internet . . . . . . . . . . . . . . . . . . . . .55

6. History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

History Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . .57

Making a Call From History . . . . . . . . . . . . . . . . . . . . . . .58

Saving a Phone Number From History . . . . . . . . . . . . . .58

Making a New Group Entry From History . . . . . . . . . . . .59

Prepending a Phone Number From History . . . . . . . . . . .59

Deleting History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

7. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

About Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Viewing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Viewing History From Contacts . . . . . . . . . . . . . . . . . . .60

Creating a New Contacts Entry . . . . . . . . . . . . . . . . . . . .61

Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . .62

Contacts Menu Options . . . . . . . . . . . . . . . . . . . . . . . . .63

Managing Contacts Entries . . . . . . . . . . . . . . . . . . . . . .65

Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . .69

Dialling Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

8. Personal Organiser . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . .70

Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . .76

9. Voice Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Using Automatic Speech Recognition (ASR) . . . . . . . . . .80

Managing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . .84

Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . .86

10. Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . .89

Creating Folders for Messages . . . . . . . . . . . . . . . . . . . .90

Locking and Unlocking Messages . . . . . . . . . . . . . . . . .90

Deleting Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

11. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Using the Settings & Info Menu . . . . . . . . . . . . . . . . . . . .96

Storing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Sending Picture Messages . . . . . . . . . . . . . . . . . . . . . .100

Managing Picture Messages . . . . . . . . . . . . . . . . . . . .102

12. Bluetooth

®

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . .105

Using the Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . .106

Using the Bluetooth Settings Menu . . . . . . . . . . . . . . .107

Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . .109

Using the Trusted List Options . . . . . . . . . . . . . . . . . . .110

Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . .111

13. Service Features . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . .113

Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . .114

Accessing Mobile Chatrooms . . . . . . . . . . . . . . . . . . .114

Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Downloading From the Web Wirelessly . . . . . . . . . . . . .118

14. Warranty Information . . . . . . . . . . . . . . . . . . . . . . .121

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

SCP-3800

User Guide

1. Safety Guidelines

Safety

Maintaining Your Phone’s Peak Performance

v v v

To maximise performance, do not touch the bottom portion of your phone where the internal antenna is located while using the phone.

Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery.

Do not expose your phone to direct sunlight for extended periods of time (such as on the dashboard of a car).

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone without a hands-free device) is prohibited in some jurisdictions. Laws vary as to specific restrictions.

v v

Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions.

Do not take notes or look up phone numbers while driving.

Following Safety Guidelines

To operate your phone safely and efficiently, always follow any special regulations in a given area. Turn your phone off in areas where use is forbidden or when it may cause interference or danger.

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radiofrequency (RF) signals. However, RF signals from mobile phones may affect inadequately shielded electronic equipment.

RF signals may affect improperly installed or inadequately shielded electronic operating systems and/or entertainment

2 1. Safety Guidelines

systems in motor vehicles. Check with the manufacturer or their representative to determine if these systems are adequately shielded from external RF signals. Also check with the manufacturer regarding any equipment that has been added to your vehicle.

Consult the manufacturer of any personal medical devices, such as pacemakers and hearing aids, to determine if they are adequately shielded from external RF signals.

Note: Always turn off the phone in health care facilities and request permission before using the phone near medical equipment.

Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives.

Turn your phone off when you are in any area that has a potentially explosive atmosphere. Although it is rare, your phone and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury or even death. These areas are often, but not always, clearly marked.

They include:

v v v

Fuelling areas such as petrol stations.

Below deck on boats.

Fuel or chemical transfer or storage facilities.

v v

Areas where the air contains chemicals or particles such as grain, dust, or metal powders.

Any other area where you would normally be advised to turn off your vehicle’s engine.

Note: Never transport or store flammable gas, liquid or explosives in the compartment of your vehicle that contains your phone or accessories.

1. Safety Guidelines 3

Turning Off Your Phone Before Flying

Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, ask permission from a crew member to use your phone while the plane is on the ground.

Restricting Children’s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as they could hurt themselves and others, damage the phone, or make calls that increase your telephone bill.

Protecting Your Battery

The guidelines listed below help you get the most out of your battery’s performance.

v

Use only approved batteries, AC adapters, and chargers.

These chargers are designed to maximise battery life. Using other batteries or chargers voids your warranty and may cause damage.

v v v v v v

In order to avoid damage, charge the battery only in temperatures that range from 0º C to 45º C.

Do not use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.

Never dispose of the battery by incineration.

Keep the metal contacts on top of the battery clean.

Do not attempt to disassemble or short-circuit the battery.

Do not store the battery in high temperature areas for long periods of time. It is best to follow these storage rules:

Less than one month:

-20º C to 60º C

More than one month:

-20º C to 45º C

4 1. Safety Guidelines

Disposal of Lithium Ion (Li-Ion) Batteries

For safe disposal options of your Li-Ion batteries, please ensure that disposal of this is in accordance with the law and regulation.

v

Do not dispose of the battery in fire; the cell may explode.

v

Do not open or puncture the battery; the released electrolyte is corrosive and may cause damage to the eyes and skin.

Special Note:

Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or business trash may be prohibited.

Note: For safety, do not handle a damaged or leaking Li-Ion battery.

Cautions

Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment.

Only use approved batteries and chargers. The use of any unauthorised accessories may be dangerous and void the phone warranty if the said accessories cause damage or a defect to the phone.

Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.

1. Safety Guidelines 5

2. The Basics

Your Phone

1. Earpiece

2. Main Screen

3. Softkeys

4. Navigation Key

5. MENU/OK Key

6. Camera Key

7. TALK Key

8. SPEAKER Key

9. Microphone

14. Camera Lens

15. Speaker

16. LED Indicator

17. Outer Screen

13. Headset Jack

12. BACK Key

11. END/POWER Key

10. Keypad

18. Micro-USB

Connector

19. Volume Key

20. Side Camera Key

21. Internal Antenna

6 2. The Basics

Key Features

1. Earpiece lets you hear the caller and automated prompts.

2. Main Screen displays all the information needed to operate your phone, such as the call status, the Contacts list, the date and time, and the signal and battery strength.

3. Softkeys let you select softkey actions or menu items corresponding to the bottom right and left lines on the Main

Screen.

4. Navigation Key scrolls through menus quickly and easily.

These keys can also be reassigned to create customised shortcuts. Default settings are: Right: Contacts, Left:

Calendar, Up: Messaging, and Down: My Content.

5. MENU/OK Key lets you access the phone’s menus and select the highlighted choice when navigating through a menu.

6. Camera Key lets you access the Pictures menu and take pictures.

7. TALK Key allows you to place or receive calls, answer Call

Waiting, use Three-Way Calling, or activate voice dial.

8. SPEAKER Key lets you place or receive calls in speakerphone mode or turn the speakerphone on and off during a call.

9. Microphone allows other callers to hear you clearly when you are speaking to them.

10. Keypad lets you enter numbers, letters, and characters, and navigate within menus. You can use the numeric keys for speed dialling.

11. END/POWER Key lets you turn the phone on or off, end a call, or return to standby mode. While in the main menu, it returns the phone to standby mode and cancels your input.

12. BACK Key deletes characters from the display in text entry mode. When in a menu, pressing the BACK key returns you to the previous menu.

2. The Basics 7

13. Headset Jack allows you to plug in an optional headset for convenient, hands-free conversations. CAUTION! Inserting an incorrect accessory into the jack may damage the phone.

14. Camera Lens

, as part of the built-in camera, lets you take pictures.

15. Speaker lets you hear the different ringers and sounds. You can mute the ringer when receiving incoming calls by pressing or any of the side keys. The speaker also lets you hear the caller’s voice in speakerphone mode.

16. LED Indicator shows your phone’s connection and charging status at a glance.

17. Outer Screen lets you monitor the phone’s status and see who is calling without opening the phone.

18. Micro-USB Connector allows you to connect a phone charger or other accessories to your phone. CAUTION! Inserting an incorrect accessory into the connector may damage the phone.

19. Volume Key allows you to adjust the ringer volume in standby mode (with the phone open) or adjust the voice volume during a call. The volume key can also be used to scroll up or down to navigate through the different menu options. To mute the ringer during an incoming call, press up or down.

Press and hold to redial with the phone closed.

20. Side Camera Key lets you access the camera mode and take pictures.

21. Internal Antenna facilitates reception and transmission. To maximise call performance, do not obstruct the internal antenna area. (See page 15.)

8 2. The Basics

Viewing the Display Screen

This list identifies the symbols you will see on your display screen.

Note: Please be aware that when multiple icons should be displayed, due to screen capacity, the visibility of icons will be prioritised.

indicates your current signal strength. The more lines you have, the stronger your signal.

indicates your phone cannot find a signal.

indicates the call is on hold.

indicates a call is in progress.

indicates Internet access is dormant. (Voice calls can still be made or received.) indicates Internet access is active.

indicates Internet access is disabled.

indicates you have missed voice calls.

indicates you have scheduled events or call alarms.

indicates you have alarm clock and/or countdown notifications.

indicates you have new text messages.

indicates you have new picture messages.

indicates you have new voicemail messages.

indicates you have urgent messages.

indicates you have two or more different types of missed alerts (missed voice calls and other missed alarm clocks, call alarms, or scheduled events).

indicates the Bluetooth feature is enabled (blue icon).

indicates your phone is connected to a Bluetooth device (green icon).

indicates your phone is discoverable by another

Bluetooth device.

2. The Basics 9

indicates your phone is communicating with a

Bluetooth device.

indicates a call is in progress using a Bluetooth device.

indicates your access to a secure site.

indicates the level of your battery charge. The more bars you see, the more power you have left. (The icon is animated while the battery is charging.) indicates your battery is charging in “Power Off” state.

indicates all the sound settings (except for applications) are off and the vibrate feature is set.

indicates volume level 1 to 8 and vibrate feature are set.

indicates a beep sounds once when you receive a phone call or message, etc.

indicates a beep sounds once when you receive a phone call or message, etc. and vibrate feature is set.

indicates all ringer settings are off.

indicates all ringer settings are off and the vibrate feature is set.

indicates all the sound settings are off.

indicates the Location feature of your phone is enabled.

indicates the Location feature of your phone is disabled.

indicates you have a new voice message when Screen

Call is activated.

indicates the Screen Call auto setting is enabled.

indicates the alarm clock and/or countdown is set.

indicates your phone is in TTY mode.

indicates the speakerphone mode is set to on.

indicates the car kit device is set to on.

indicates the wired headset device is set to on.

10 2. The Basics

Turning Your Phone On and Off

Turning Your Phone On

©

Press .

Once your phone is on, it displays “Looking for service...” which indicates that your phone is searching for a signal.

When your phone finds a signal, it automatically enters standby mode. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for service by pressing any key (when your phone is turned on).

Tip: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.

Turning Your Phone Off

©

Press and hold for two seconds until you see the powering down animation on the display screen.

Your screen remains blank while your phone is off (unless the battery is charging).

2. The Basics 11

Using the Battery

Installing the Battery

1.

Insert the battery into the opening on the back of the phone,

2.

Replace the battery cover and slide it upwards until you

2

1

3

Removing the Battery

Warning! Do not handle a damaged or leaking Li-Ion battery as you can be burned.

1.

Make sure the power is off so that you do not lose any stored numbers or messages.

2.

Press the battery release latch ( ) and slide the battery

3.

Lift up the battery and remove it from the phone ( ).

1

3

2

12 2. The Basics

Charging the Battery

Your phone comes with a rechargeable battery. You should charge the battery as soon as possible so you can begin using your phone.

Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off and you will lose all the information you were just working on. For a quick check of your phone’s battery level, glance at the battery charge indicator located in the upper-right corner of your phone’s display screen. If the battery charge is getting too low, the battery icon appears and the phone displays a warning message.

Always use an approved travel charger or vehicle power adapter to charge your battery.

Warning! Using the wrong battery charger could cause damage to your phone and void the warranty.

Using the Phone Charger

1.

Plug the charger into a wall outlet.

2.

Open the micro-USB connector cover located on the upper left side of your phone.

3.

Plug the other end of the charger into the micro-USB connector (with the battery installed).

n n

A red indicator light means the battery is charging.

A green indicator light means charging is completed.

Tip: Be sure to watch your phone’s battery strength indicator and charge the battery before it runs out of power.

Note: You can also charge your phone’s battery with a USB cable (not included).

Simply plug one end of the USB cable into your phone and the other end into a free USB port on your desktop or laptop computer. (If your battery is completely run down, it cannot be charged via the USB cable.)

2. The Basics 13

Navigating Through the Menus

The navigation key on your phone allows you to scroll through menus quickly and easily. The scroll bar at the right of the menu keeps track of your position in the menu at all times.

To navigate through a menu, simply press the navigation key up or down. If you are in a first-level menu (after selecting an item in the main menu), you may also navigate to the next or previous first-level menu by pressing the navigation key right or left.

For a diagram of your phone’s menu, please see “Menu

Navigation” on page 30.

Selecting Menu Items

As you navigate through the menu, menu options are highlighted. Select any option by highlighting it and pressing

. If the option is numbered, you can select it by pressing the corresponding number on the phone’s keypad.

For example, to display your volume settings:

1.

Press to access the main menu.

Note: You can select List View or Grid View for your phone’s menu style (see

“Changing the Phone’s Menu Style” on page 36).

2.

Select Settings by highlighting it and pressing or pressing (in List view).

or by highlighting it and

3.

Select Sounds by pressing pressing .

4.

Select Volume by pressing pressing .

or by highlighting it and

5.

Select Ringer by pressing pressing .

or by highlighting it and

Note: For the purposes of this guide, the above steps condense into “Select

> Settings > Sounds > Volume > Ringer.”

14 2. The Basics

Displaying Your Phone Number

©

Select

> Settings > Phone Info > My Phone#

. (Your phone number and other information about your phone will be displayed.)

Tip: You can also display your phone number through the Contacts menu.

Select > Settings > More... > Contacts > My Name Card. To send your contact information using Bluetooth, press Options (right softkey) > Send Card.

Making and Answering Calls

Holding Your Phone

To maximise performance, do not obstruct the internal antenna area while using the phone.

Correct Incorrect

Internal Antenna

2. The Basics 15

Making Calls

1.

Make sure your phone is on.

2.

Enter a phone number from standby mode. (If you make a mistake while entering, press time. Press and hold to delete one digit at a to delete the entire number.)

3.

Press or .

4.

When you are finished, press or close the phone.

Tip: You can also place calls from your phone by using speed dialling (page

24), your History listings (page 58), and Automatic Speech Recognition

(ASR, page 81).

To redial your most recent call, press twice.

Dialling Options

Dialling options are displayed when you press Options (right softkey) after entering numbers in standby mode:

v

Contacts Match to place a call using the Contacts Match feature. (If applicable. See “Using Contacts Match” on page 24.)

v v v

Save to save the phone number in your Contacts. (See

“Saving a Phone Number” on page 21.)

P

Hard Pause to insert a hard pause. (See “Dialling and

Saving Phone Numbers With Pauses” on page 22.)

T

2-Sec. Pause to insert a two-second pause. (See “Dialling and Saving Phone Numbers With Pauses” on page 22.)

16 2. The Basics

Answering Calls

To answer an incoming call:

1.

Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.

Press or to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by simply opening the phone or by pressing any number key. See “Call Answer Mode” on page 46.)

Your phone notifies you of incoming calls in the following ways:

v v v v

The phone rings and/or vibrates.

The LED flashes.

The backlight illuminates.

The screen displays an incoming call message.

v v

If available, the phone number of the caller is displayed.

If the phone number is in your Contacts, the Contacts entry’s name is displayed.

The following options are also displayed by pressing Options

(right softkey):

v v

Answer to answer the call.

Answer:Speaker to answer the call in speakerphone mode.

v v v

Select Audio to switch the call to a device (if available).

Answer on Hold to put the call on hold. (See “Setting Answer on Hold” on page 18.)

Screen Call to answer the call by using prerecorded announcement. (See “Setting Up Screen Call” on page 86.)

v v

Quiet Ringer to mute the ringer. (This feature appears when the ringer is set.)

Ignore with Text to ignore the call and send a text message to the caller (if available).

2. The Basics 17

Setting Answer on Hold

This feature allows you to hold an incoming call when you cannot answer immediately.

To set Answer on Hold:

©

When you receive an incoming call, press Options (right softkey) > Answer on Hold. (The caller hears a message while waiting for you to answer. The icon will appear on the screen while the call is on hold.)

To resume the call:

©

Press Answer (left softkey) or .

Ending a Call

©

Close the phone or press .

Missed Call Notification

When an incoming call is not answered, the missed call log is displayed on your screen.

To display the missed call entry from the notification screen:

©

Select the entry and press . (Select an option to continue.)

Tip: If you have two or more notifications, the Missed Alerts list will appear.

To display a missed call entry from standby mode:

1.

Select

> Missed Alerts

.

2.

Highlight the entry you wish to view and press .

18 2. The Basics

Calling Emergency Numbers

You can place calls to 111 (dial and press ), even if your phone is locked or your account is restricted. The following options are available by pressing Options (right softkey) during an emergency call:

v v

Speaker On to activate speakerphone mode. (If you are already in speakerphone mode, the option will appear as

Speaker Off to deactivate.)

Unlock MyPhone to unlock your phone (appears only if the phone is locked).

Tip: Press My Phone (left softkey) to display your phone number during an emergency call.

Emergency mode options:

If you end the emergency call by pressing , your phone enters the emergency mode.

1.

Press to end an emergency call.

2.

Press Options (right softkey):

n

Call 111 to call 111 again.

n n

Call 111:Spkr.

to call 111 in speakerphone mode.

Exit Emergency to exit emergency mode.

Note: When you are in emergency mode, you can exit only from the Options menu.

3.

Highlight an option and press .

Note: You can also use “112” or “911” for emergency calling.

2. The Basics 19

In-Call Options

During a call, your phone displays menu options by pressing

Options

(right softkey):

v v

Three-Way Call to call a third party.

Main Menu to display the phone’s main menu.

v v v v v v

Save to save the currently used phone number in your

Contacts.

ContactDetails to display the matching Contacts entry (if applicable).

Contacts to display your Contacts list.

Call Memo Rec. to record the other party’s voice.

Phone Info to access the Phone Info menu.

Transfer Audio to switch the call to an optional external device

(if applicable).

Tip: To return to the in-call screen from the main menu, etc., press .

During a call, use the volume key or press the navigation key up or down to adjust the receiver volume. Also, press either the left softkey or the side camera key to mute the microphone.

Press either again to unmute the microphone.

Note: You can turn the speakerphone on or off by pressing call.

during a phone

Warning! Due to higher volume levels, do not place the phone near your ear during speakerphone use.

20 2. The Basics

End-of-Call Options

Once you have finished your call, the phone will display the

Recent History. From the Recent History, you can view the date and time of the call, the phone number (if available), the entry name (if the number is already in your Contacts), and the duration of the call.

©

©

Press Options (right softkey) to display the Recent History options. (See “History Menu Options” on page 57 for details.)

Press Send Msg (left softkey) to send a text or picture message to the entry in the Recent History.

Note: Some options may not be displayed for calls identified as Private.

Saving a Phone Number

Your phone can store up to 7 phone numbers in each of 300

Contacts entries with up to 500 total numbers. Each entry’s name can contain up to 64 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see “Contacts” on page 60.)

1.

Enter a phone number and press Options (right softkey) >

Save

.

2.

Select New Entry or Existing Entry:

n

New Entry to create a new Contacts entry for the number.

n

Existing Entry to save the number to an existing entry.

(This step is not necessary on the very first entry in your

Contacts.)

3.

If New Entry was selected, select a phone type, and then use the keypad to enter the new entry name and press .

– or –

If Existing Entry was selected, select an existing entry to which you want to save the number, and then select a phone type and press .

4.

Press Done (left softkey).

2. The Basics 21

Finding a Phone Number

You can search Contacts entries for phone numbers that contain a specific string of numbers.

1.

Enter the last three or more digits of the number in standby mode. (The more numbers you enter, the more specific the search becomes.)

2.

All Contacts entries matching the entered numbers will be displayed. Highlight the entry and press to dial the number.

Dialling and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or credit card billing numbers.

There are two types of pauses available on your phone:

v

Hard Pause to send the next set of numbers when you press

.

v

2-Sec. Pause to automatically send the next set of numbers after two seconds.

Note: You can have multiple pauses in a phone number and combine two-second and hard pauses.

1.

Enter the phone number and press Options (right softkey).

2.

Select either Hard Pause or 2-Sec. Pause. (Hard pauses are displayed as a “P” and two-second pauses as a “T”.)

3.

Enter additional numbers.

4.

To dial the number, press or . (When dialling a number with a hard pause, press to send the next set of numbers.)

– or –

To save the number in your Contacts, press Options (right softkey) > Save.

Note: The use of Hard Pause or 2-Sec. Pause will disengage the ability to adjust the volume level of the call using the volume key.

22 2. The Basics

Making International Calls With Plus Code Dialling

Your phone’s plus code dialling feature can automatically dial the international access code when you are travelling outside of New Zealand. (Not available in some areas.)

1.

From standby mode, press and hold displayed on your phone screen.

until a “+” sign is

2.

Enter the country code and phone number, and press or

.

Note: To make an international call from inside New Zealand, please dial 00, and then enter the country code and phone number.

Dialling From the Contacts List

1.

From standby mode, press Contacts (right softkey).

2.

Highlight the entry you want to call and press to dial the entry’s default phone number.

– or –

To dial another number from the entry, highlight the name and press , and then highlight the number you wish to call and press .

Note: The icon next to each entry represents the labels (for example, Mobile,

Home, Work, etc.) of the entry’s default phone number. A triangle next to the icon means there are other phone numbers for the entry. Press the navigation key right or left to select other number.

2. The Basics 23

Using Speed Dialling

You can store up to 98 numbers in your phone’s speed dial memory to make contacting friends and family as easy as pressing a key or two. With this feature, you can dial speed dial entries using one key press for locations 2-9 or two key presses for locations 10-99. (For information on setting up speed dial numbers, see “Assigning Speed Dial Numbers” on page 66.)

©

From standby mode, press and hold the appropriate key for approximately two seconds for locations 2-9, or press the first digit and then press and hold the second digit for locations 10-99.

The display showing “Connecting...” confirms that the number has been dialled.

Using Contacts Match

The Contacts Match feature allows you to retrieve any number saved in your Contacts by entering only the last three to six digits of the number. You need to activate this feature first to use it. (See “Setting Contacts Match” on page 46.)

To place a call using the Contacts Match feature:

1.

Enter the last three to six digits of a Contacts entry’s phone number.

2.

All Contacts entries matching the entered numbers will be displayed. Highlight the entry and press or to place a call.

24 2. The Basics

Entering Text

Selecting a Character Input Mode

Your phone provides convenient ways to enter words, letters, numbers, and symbols whenever you are prompted to enter text (for example, when adding a Contacts entry or when sending text messages).

1.

From a screen where you can enter text, press Mode (right softkey) to change the character input mode.

2.

Select one of the following options and press :

Note: The menus displayed vary according to the entry field. Some options are grouped. If you see a triangle on the right of a menu, you can press the right and left navigation keys to switch among grouped options.

n n n n n n n n n n n n n

T9 Word to enter characters using T9 Text Input (see page 26).

Alphabet to enter characters by using Alphabet mode

(see page 28).

SYMBOL to enter symbols (see page 29).

SMILEYS to enter smiley pictures (see page 29).

Emoticons to enter emotion icons (see page 29).

Web Shortcut to enter Web shortcuts (for example, www., http://, or .com).

Preset Msgs to enter preset messages (see pages 29 and 41).

Recent Msgs to enter messages used recently

(if applicable).

Paste List to paste copied or cut text (if applicable, see page 28).

From To Do to use words you added in your calendar as

To Do (see page 73).

NUMBER to enter numbers.

Signature to enter your signature (see page 42).

Delete All to delete all text (if applicable).

2. The Basics 25

n n n

Select Text to select stored text for copying or cutting

(if applicable, see page 28).

Add Word to store words that you use frequently

(see below).

Text Options to display the Text Entry settings menu

(see page 29).

Tip: Before entering text, press

Shift

to change letter capitalisation style

: Abc > ABC > abc (Alphabet mode)

: T9w > T9W > t9w (T9 Text Input mode).

Press and hold Mode (right softkey) to toggle between Alphabet and T9

Text Input mode.

Entering Characters Using T9 Text Input

T9 Text Input lets you enter text with just one key press per letter. (To select the T9 Word mode when entering text, see

“Selecting a Character Input Mode” on page 25.)

T9 Text Input uses an intuitive word database to analyse the letters you enter and create a suitable word. (The word may change as you type.) To accept a word and insert a space, press or .

Tip: In order to insert a space by pressing , the Auto-Space setting must be on (see page 29).

If you make a mistake, press

Press and hold to delete a single character.

to delete an entire entry.

Adding a Word to the T9 Database

If a word you want to enter is not displayed as an option when you are using T9 Text Input, you can add it to the database.

To add a word to the T9 Text Input database:

1.

Press Mode (right softkey) > Add Word.

– or –

From standby mode, select

> Settings > Text Entry >

Add Word

.

26 2. The Basics

2.

Enter the word using Alphabet mode and press Save (left softkey).

To edit or delete the words you have added:

1.

Press Mode (right softkey) > Text Options > My Words.

– or –

From standby mode, select

> Settings > Text Entry >

My Words

.

2.

Highlight a word and press Options (right softkey).

3.

Select an option and press :

n

Edit to edit a word in My Words.

n

Delete to delete a word in My Words.

Customising T9 Settings

1.

Press Mode (right softkey) > Text Options > T9 Settings.

– or –

From standby mode, select

> Settings > Text Entry >

T9 Settings

.

2.

Select an option and press :

n

Word Predict to automatically display the word that may follow the current text input.

n n n

Word Complete to show the completed words that match the keys you have entered without entering the whole word.

Word Scan to allow T9 Text Input to recognise words by searching Contacts and messages.

Word List to display the word list.

n

Show aft entr to select when (after one to three digits) to display the word list. The word list will be displayed based on the number of digits you selected.

n

Show aft wait to select how many seconds the phone should wait to display the word list.

For more information about T9 Text Input, visit the Nuance

Web site at www.nuance.com/t9/textinput/

.

2. The Basics 27

Entering Characters Using Alphabet Mode

To enter characters using Alphabet mode, select the Alphabet mode (see “Selecting a Character Input Mode” on page 25).

Press the corresponding key repeatedly until the desired character appears. By default, the first letter of an entry is capitalised and the following letters are lowercased.

Characters scroll in the following order:

Key

English Sequence

Upper Case Lower Case

. , @ 1 ? !

* # /

A B C 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W X Y Z 9

0

Space a b c 2 d e f 3 g h i 4 j k l 5 m n o 6 p q r s 7 t u v 8 w x y z 9

One-character-shifted Caps Lock Unshifted

After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.

Copying/Cutting and Pasting

1.

On a screen where you can enter text, place the cursor next to the text to be cut or copied and press Mode (right softkey) >

Select Text

.

2.

Use the navigation key to highlight the text and press Next

(left softkey) > Copy or Cut. Press when Cut is selected.

3.

Press Mode (right softkey) > Paste List, and use the up and down navigation keys to highlight the text to be pasted, if there are choices.

Note: Paste List is grouped together with Web Shortcut, Preset Msgs and

Recent Msgs.

4.

Use the right and left navigation keys to place the cursor where the text is to be pasted to and press

> Done

(left softkey).

28 2. The Basics

Entering Symbols, Smileys, Emoticons, and Preset

Messages

Special text entry sets can help speed your messaging and

Web browsing. These sets, including SYMBOL, SMILEYS,

Emoticons, and Preset Messages, are all accessed the same way.

1.

From a screen where you can enter text, press Mode (right softkey).

2.

Select SYMBOL, SMILEYS, Emoticons, or Preset Msgs.

3.

Use your keypad or navigation key to select a desired text or symbol and press .

Setting Text Entry Options

1.

Select

> Settings >Text Entry

.

2.

Select an option and press :

n

Auto-Capital to set the auto-capitalisation to On or Off.

n n n

Auto-Space to set the auto-spacing to On or Off after T9 words you enter.

My Words to add a word to or edit a word in the T9 database (see page 26).

T9 Settings to customise the T9 settings (see page 27).

n n n n

Default Input to select T9 Word, Alphabet, or Retain Mode for the initial entry mode. Select Retain Mode to retain the previous entry mode.

Add Word to store words that you use frequently

(see page 26).

Auto-Complete to automatically display words that may follow the current text input.

Help to see the T9 instructions page.

2. The Basics 29

3. Menu Navigation

Viewing the Menus

Menu Diagram

The following list outlines your phone’s menu structure when in List View. (See “Changing the Phone’s Menu Style” on page 36.)

1. Missed Alerts

2. History

3. Contacts

4. Messaging

1. Send Message

2. Text

3. Picture Msg

4. Go to Email

5. Chat

6. Voicemail

7. Settings

5. My Content

Games

Ringers

Screensavers

Applications

Caller Tunes

Dynamic 1-11 (If applicable)

Others (If applicable)

6. Pictures

1. Camera

2. Picture Msg

3. My Albums

4. Order Prints

5. Settings&Info

7. Web

8. Tools

1. Voice Memo

2. Bluetooth

3. Calendar

4. Alarm Clock

5. Countdown

6. Stopwatch

7. World Clock

8. Calculator

9. Assign. Media

9. Settings

1. Display

2. Sounds

3. Bluetooth

4. Messaging

5. Text Entry

6. Phone Info

7. More...

30 3. Menu Navigation

IN USE MENU

Press Options (right softkey) to display the following options:

1. Three-Way Call

2. Main Menu

3. Save (or ContactDetails)

4. Contacts

5. Call Memo Rec.

6. Phone Info

7. Transfer Audio (if applicable)

3. Menu Navigation 31

4. Your Phone’s Settings

Sound Settings

Ringer Types

Ringer types help you identify incoming calls and messages.

You can assign ringer types to individual Contacts entries, types of calls, and types of messages.

Selecting Ringer Types for Incoming Calls

1.

Select

> Settings > Sounds > Ringer Type > Incoming Calls

.

2.

Select Default Ringer, Contact Entries, or Unknown #s.

n

If you select Contact Entries, select All Contacts or

One Contact

.

3.

Select an option and press .

4.

Select an available ringer and press .

Selecting Ringer Types for Messages

1.

Select

> Settings > Sounds > Ringer Type > Messaging

.

2.

Select Text Message, Picture Msg, or Voicemail.

3.

Select an option and press .

4.

Select an available ringer and press .

Selecting Ringer Types for Alarms or Scheduled Events

1.

Select

> Settings > Sounds > Ringer Type

.

2.

Select Alarm or Schedule.

3.

Select an option and press .

4.

Select an available ringer and press .

32 4. Your Phone’s Settings

Selecting Ringer Types for Power On or Power Off Tone

1.

Select

> Settings > Sounds > Ringer Type

.

2.

Select Power On or Power Off.

3.

Select an option and press .

4.

Select an available ringer and press .

Adjusting the Phone’s Volume Settings

Adjusting the Ringer Volume

1.

Select

> Settings > Sounds > Volume

.

2.

Select Ringer, Earpiece, Headset, Speakerphone, Applications, or Start Up/Power Off.

3.

Select a volume level and press Done (left softkey).

Tip: You can make the phone vibrate at any volume level by checking the box next to Always Vibrate.

You can choose the ringer volume from standby mode (or the earpiece volume during a call) by using the volume key on the left side of your phone.

Adjusting the Alert Volume

You can set the alert volume separately from the ringer volume setting.

1.

Select

> Settings > Sounds > Volume > Advanced...

.

2.

Select Alarms, Text Message, Picture Msg, or Voicemail.

3.

Using the navigation key, select Separate Vol.

4.

Select a volume level, and press Done (left softkey).

4. Your Phone’s Settings 33

Selecting Vibrate Types

With this feature, you can select vibrate types for incoming calls, messages, alarms, and scheduled events.

1.

Select

> Settings > Sounds > Vibrate Type

.

2.

Select Incoming Calls, Messaging, Alarm, or Schedule. The following items require an additional step:

n n

Incoming Calls: select Default Vibrate or Unknown #s.

Messaging: select Text Message, Picture Msg,or Voicemail.

3.

Select a vibrate type and press .

Setting Keytones

Your phone offers a number of options for selecting the audible tones accompanying a key press.

1.

Select

> Settings > Sounds > Keytones

.

2.

Select an option and press :

n

Tone Length to select a key tone length. This setting is valid when Tone Type is set to Type 1. (Longer tone lengths may be better for tone recognition when dialling voicemail or other automated systems.)

n n

Tone Volume to select a key press volume level.

Tone Type to select the sound of a key press.

34 4. Your Phone’s Settings

Setting Up Voice Guide

Voice Guide activates both voice prompt and key press echo functions. This feature allows you to hear voice prompts such as “Start Snooze Mode” and “Snooze Canceled” as well as spoken numbers as you press the keypad.

1.

Select

> Settings > Sounds > Voice Guide

.

2.

Select On or Off.

Note: The default setting is Off.

When the ringer volume is set to Silence All or Vibrate All, the voice guide will not work.

The key press echo function is available when you are in standby mode.

Alert Notification

Your phone can alert you with an audible tone when you change service areas, a call has been connected, there are messages, or your network signal is fading, as well as once a minute during a call.

To set alerts:

1.

Select

> Settings > Sounds > Alerts

.

2.

Select Beep Each Minute, Out of Service, Connect,

Signal Fade/Call Drop

, or Messaging.

3.

Select a setting and press .

Silence All

The Silence All option allows you to mute all sounds without turning your phone off.

©

Press and hold the volume key down in standby mode with the phone open. (The screen will display “Silence All.”)

n

To deactivate, with the phone open, press the volume key up repeatedly to select a volume level.

Tip: You can also select Vibrate All to set your phone to vibrate only.

4. Your Phone’s Settings 35

Display Settings

Changing the Phone’s Menu Style

Your phone allows you to choose how the main menu appears on your display screen.

1.

Select

> Options

(right softkey) > Change View.

2.

Select Grid View or List View:

n

Grid View to view each main menu item as an animated single-screen icon. You can select a menu by pressing a number key. Allocation of menu options corresponds to that of number keys on the keypad.

n

List View to view main menu as a list. Menu option is numbered and you can select it by pressing the corresponding number key on the keypad.

Changing the Backlight Time Length

To change the Backlight setting:

1.

Select

> Settings > Display > Main Screen > Backlight

.

2.

Select Dim Only, Always On, or a preset length of time.

To change the Keypad Light setting:

1.

Select

> Settings > Display > Keypad Light

.

2.

Select Always Off or a preset length of time.

Note: Long backlight settings affect the phone’s talk and standby times.

Power Save Mode

This feature helps conserve your battery power.

1.

Select

> Settings > Display > Power Save Mode

.

2.

A message appears. Press OK (left softkey) to continue.

3.

Select On. (Select Off to deactivate this feature.)

36 4. Your Phone’s Settings

Changing the Greeting

1.

Select

> Settings > Display > Main Screen > Foreground >

Greeting > Custom

.

2.

Enter a custom greeting using your keypad and press .

(See “Entering Text” on page 25.)

Changing the Font Size

To change the input font size:

1.

Select

> Settings > Display > Main Screen > Input Font

.

– or –

Select

> Settings > More... > Accessibility > Input Font

.

2.

Select Phone#s, Messaging, or Others.

3.

Select an input font size and press .

To change the display font size:

1.

Select

> Settings > Display > Font Size

.

– or –

Select

> Settings > More... > Accessibility > Font Size

.

2.

Select an option and press :

n

Main Screen to select Messaging or Browser.

n

Outer Screen to select Name/Phone#s.

3.

Select a font size and press .

Tip: You can press Preview (right softkey) and select a font size by pressing the navigation key right or left.

Changing the Background

1.

Select

> Settings > Display > Main Screen > Background

.

Tip: You may also be able to change the background from standby mode by selecting > Options (right softkey) > Background.

2.

Select background and press .

4. Your Phone’s Settings 37

Changing the Contrast

You can adjust your screen’s contrast (brightness) to suit your surroundings.

1.

Select

> Settings > Display > Contrast

.

2.

Select an option and press .

Changing the Display Screen Animation

1.

Select

> Settings > Display > Main Screen or Outer Screen >

Animation

.

n

If you select Main Screen, select Outgoing Calls or

Service Search

.

2.

Select an option and press .

3.

Select an animation display and press .

Changing the Screen Saver

Your phone offers you the option of displaying a screen saver while in standby mode.

1.

Select

> Settings > Display > Main Screen > Screensaver

.

2.

Select an option and press .

3.

Select a screen saver and press .

4.

Press OK (left softkey) to apply the screen saver.

Changing the Clock/Calendar Display for Standby Mode

Select from among a variety of items to be displayed in standby mode.

1.

Select

> Settings > Display > Main Screen or Outer Screen.

2.

Select Foreground > Clock/Calendar.

3.

Select a display option and press .

4.

Press OK (left softkey) to apply the display setting.

38 4. Your Phone’s Settings

Setting Return to Idle Mode

1.

Select

> Settings > Display > Return to Idle

.

2.

A message appears. Press OK (left softkey) to continue.

3.

Select Automatically or End Key:

n n

Automatically to return to Idle mode (standby mode or signal search mode) automatically when no key is pressed for 30 seconds.

End Key to return to Idle mode by pressing .

Note: The End Key setting affects the phone’s talk and standby times.

Sleep Mode

This feature helps conserve your battery power by restricting the display.

1.

Select

> Settings > Display

.

2.

Select Main Screen or Outer Screen > Sleep Mode.

3.

Select a time interval before the phone goes into sleep mode and press . (Select Off to deactivate this feature

[Main Screen only].)

4. Your Phone’s Settings 39

Location Settings

Your phone is equipped with a Location feature for use in connection with location-based services that may be available in the future.

Note: The location feature is currently not available.

The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except emergency numbers e.g. 111.

Note: Even if the Location feature is enabled, no service may use your location without your express permission.

To enable your phone’s Location feature:

1.

Select

> Settings > More... > Location

. (The Location disclaimer will be displayed.)

2.

Read the disclaimer and press OK (left softkey).

3.

Select On or Off.

When the Location feature is on, your phone’s standby screen will display the icon. When Location is turned off, the icon will be displayed.

40 4. Your Phone’s Settings

Messaging Settings

Setting Message Notification Display

You can set your phone to display an icon and message notification or just display an icon notification when you receive a text message, picture message, or voicemail.

1.

Select

> Settings > Messaging > Notification

.

2.

Select Msgs and Icon or Icon Only.

Tip: To access the Messaging settings menu, you can also select

Messaging > Settings .

>

Setting Message Reminders

When new messages arrive, you can choose to have your phone notify you by playing an audible alert.

1.

Select

> Settings > Messaging > Message Reminder

.

2.

Select Text Message, Picture Msg, or Voicemail.

3.

Select Repeat or Ringer Length.

4.

Select a setting and press .

Managing Preset Messages

Your phone can store preset messages for use with text messaging. You can edit your phone’s default preset messages through the Settings menu.

To edit or delete a preset message:

1.

Select

> Settings > Messaging > Preset Msgs

. (The list of preset messages is displayed.)

2.

Select the message you want to edit or delete and press

Options

(right softkey).

3.

Select Edit, and use your keypad to edit the message and press to save your changes.

– or –

Select Delete > Yes (left softkey) to delete the message. (You can also reset all messages by selecting Reset All Msgs > Yes

[left softkey].)

4. Your Phone’s Settings 41

Setting a Callback Number

With this feature, you can notify your recipients of your callback number with a text message.

1.

Select

> Settings > Messaging > Callback Number

.

2.

Select None, My Phone#, or Other. (If you select Other, enter a callback number and press or Done [left softkey].)

Setting a Customised Signature

This feature allows you to add a customised signature to each message you send.

1.

Select

> Settings > Messaging > Signature

.

2.

Select On. (If you do not wish to attach a signature to your outgoing messages, select Off.)

3.

Enter your signature in the Text field. (See “Entering Text” on page 25.)

4.

Press or (left softkey).

Note: You can insert your signature even when your signature setting is off.

Press Mode (right softkey) and select Signature while composing your message.

Setting Drafts Alert

Drafts Alert sends you a reminder when you have unsent messages in the drafts folder.

1.

Select

> Settings > Messaging > Drafts Alert

.

2.

Select On.

42 4. Your Phone’s Settings

Airplane Mode

When your phone is in Airplane mode, it cannot send or receive any calls (except for 111 dialling, when within the home network) or access online information. You may still use the phone’s other features, such as voice memo, calculator, calendar, etc., while you are in Airplane mode.

1.

Select

> Settings > More... > Airplane Mode

.

2.

Read the disclaimer and press or OK (left softkey).

3.

Select On or Off.

Note: While in Airplane mode, your phone’s screen will display “Phone Off”.

4. Your Phone’s Settings 43

TTY Use

A TTY (teletypewriter, also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities, to communicate by telephone.

Your phone is compatible with TTY devices using 45.45 Baud rate. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission and

45.45 Baud rate. Your phone and TTY device will connect via a special cable that plugs into your phone’s headset jack. If this cable was not provided with your TTY device, contact your TTY device manufacturer to purchase the connector cable.

1.

Select

> Settings > More... > Accessibility > TTY

. (An informational message will be displayed.)

2.

Read the disclaimer and press or OK (left softkey) to continue.

3.

Select On or Off.

Note: When you connect TTY devices, your phone will display the icon in

TTY mode.

If TTY mode is enabled, the audio quality of non-TTY devices connected to the headset jack may be impaired.

IMPORTANT NOTICE: 111 Emergency Calling

It is recommended that TTY users make emergency calls by other means including mobile and landline communications.

44 4. Your Phone’s Settings

Phone Setup Options

My Favourites

Your phone offers you the option of assigning a shortcut to a favourite or often-used function. Pressing Favourites (left softkey) will launch your user-defined shortcut.

To assign a shortcut:

1.

Press Favourites (left softkey).

2.

Select <Add Favourite>.

3.

Select an option and press :

n

Contact to display stored Contacts entries.

n n n n

My Content to display downloaded items stored in your phone.

My Album to display thumbnail images stored in your phone.

Web Bookmark to display your bookmarked sites.

Menu Item to assign an often-used menu item.

4.

Using the navigation key or your keypad, select an item to be assigned to the My Favourites list.

5.

Press Assign (left softkey) to save if you select options other than Contact.

Tip: While My Favourites list is displayed, press Options (right softkey) to customise the list according to your needs.

Auto Answer Mode

This feature sets the phone to automatically pick up incoming calls in speakerphone mode or hands-free mode (when connected to an optional hands-free device).

1.

Select

> Settings > More... > Call Setup > Auto-Answer

.

2.

Select Hands-free or Speakerphone.

3.

Select 5 Seconds, 15 Seconds, or Off.

4. Your Phone’s Settings 45

Call Answer Mode

This feature allows you to select how to answer incoming calls on your phone: whether you want to be required to press , to press any number key (except keys), or simply to open the phone.

, , softkeys, and side

1.

Select

> Settings > More... > Call Setup > Call Answer

.

2.

Select Talk Key, Any Key, or Flip Open.

Setting Contacts Match

To activate the Contacts Match feature:

1.

Select

> Settings > More... > Call Setup

.

2.

Select Contacts Match > On.

n

To deactivate this feature, select Off.

Tip: To place a call using the Contacts Match feature, see “Using Contacts

Match” on page 24.

Note: This setting does not apply to 111 or directory assistance.

Headset Mode

This feature allows you hands-free phone use. Press the Turbo

Button (the operation button) on an optional headset to activate useful functions.

To set the headset mode:

1.

Select

> Settings > More... > Headset Mode > Turbo Button

.

2.

Select On or Off.

Tip: Press the turbo button on the headset twice to redial the last outgoing call.

Also, press and hold the same button to activate ASR.

To set the ringer sound:

1.

Select

> Settings > More... > Headset Mode

.

2.

Select Ringer Sound > Normal or Headset Only.

46 4. Your Phone’s Settings

Setting Navigation Key Shortcuts

You can use the navigation keys as shortcuts to access specific menu items directly from standby mode. With this feature, you can reassign the shortcuts to the menu items you choose.

1.

Select

> Settings > More... > Navigation Keys

.

2.

Select the navigation key you wish to reassign and press .

3.

Using the navigation key or your keypad, select a function.

4.

Press Assign (left softkey) to save. (If there are additional levels available, press before selecting your shortcut.)

Setting the Current Time

To set the current time manually in a no-service area:

1.

Select

> Settings > More... > Set Time/Date

.

2.

Set the current time and date and press .

Setting the Side Key Guard

This feature enables you to lock external keys while the phone is closed.

1.

Select

> Settings > More... > Side Key Guard

.

2.

Select On or Off.

Note: This feature does not apply when the phone is open.

Tip: You can deactivate this feature temporarily by pressing and holding the volume key while the phone is closed. This feature will be reactivated if the phone is left unoperated for approximately 30 seconds or when the phone is opened and closed again.

4. Your Phone’s Settings 47

Browser Settings

Customise your phone’s Web browser settings.

Editing Bookmarks

Edit, sort, and delete Web browser bookmarks.

1.

Select

> Settings > More... > Browser > Bookmarks

.

2.

Scroll to highlight a bookmark and press Options (right softkey).

3.

Select an option and press :

n

Show Page to display the Web page of the selected bookmark.

n n

Edit to edit the title or address of a selected bookmark.

Set Home to set the selected bookmark to be your home page.

n n n

Delete to delete a selected bookmark.

Delete All to delete all bookmarks saved in the phone.

Reorder to change the order of the bookmarks.

Deleting Browser Cache Files and Cookies

With this feature, you can delete the browser cache

(temporary files) and “cookies” saved in the phone.

1.

Select

> Settings > More... > Browser

.

2.

Select Delete Web Cache or Delete Web Cookies.

3.

If you are certain you would like to delete, press OK (left softkey) > Yes (left softkey).

Editing the Home Page

This feature allows you to edit the URL of the home page on your phone.

1.

Press

> Settings > More... > Browser > Edit Home Page

.

2.

Use your keypad to edit the URL and press OK (left softkey) to save your changes.

48 4. Your Phone’s Settings

Phone Information Management

Displaying Your Phone’s Information

©

Select

> Settings > Phone Info > My Phone#

.

Displaying Icon Definitions

1.

Select

> Settings > Phone Info > Icon Glossary

.

2.

Select the item for which you want to see the explanation and press .

Displaying the Version Information

©

Select

> Settings > Phone Info > Version

.

Displaying Advanced Information

©

Select

> Settings > Phone Info > Advanced

.

4. Your Phone’s Settings 49

5. Security

Accessing the Security Menu

Your phone’s security settings are available through the

Security menu. You must enter your lock code to view the

Security menu.

1.

Select

> Settings > More...> Security

.

2.

Enter your lock code to display the Security menu.

Tip: If you never changed the lock code number and you cannot recall your lock code, try using the last four digits of your phone number.

Using Your Phone’s Lock Feature

Locking Your Phone

When your phone is locked, you can only make calls to 111,

Customer Service, and to special numbers without entering the lock code.

1.

From the Security menu, select Lock My Phone.

2.

Select Lock Now or On Power-up:

n

Lock Now to lock your phone now.

n

On Power-up to lock your phone the next time it is turned on.

3.

Select Full Lock or Exp. Incom.Calls:

n

Full Lock to restrict both outgoing and incoming calls.

n

Exp. Incom.Calls

to restrict outgoing calls while allowing incoming calls.

Unlocking Your Phone

1.

From standby mode, press Unlock (left softkey).

2.

Enter your lock code.

50 5. Security

Changing the Lock Code

1.

From the Security menu, select Change Lock Code.

2.

Enter and re-enter a new lock code.

Calling in Lock Mode

You can place calls to 111, Customer Service, and to your special numbers even if your phone is locked. (See “Locking

Your Phone” on page 50.)

Note: You can call only emergency numbers while Voice is set to Locked in

Restrict and Lock (see “Locking Voice Calls” below).

©

To call an emergency number, special number, or Customer

Service, enter the phone number and press . (For information on special numbers, see “Using Special

Numbers” on page 52.)

Locking Voice Calls

With this feature, you can restrict incoming and outgoing voice calls (except 111).

1.

Select

> Settings > More... > Restrict and Lock

.

2.

Select Voice, and then enter your lock code.

3.

Select Lock > Locked. (Select Unlocked to deactivate this feature.)

Locking the Camera/Pictures Menus

1.

Select

> Settings > More... > Restrict and Lock

.

2.

Select Camera/Pictures, and then enter your lock code.

3.

Select an option and press :

n

Unlocked to unlock the current Camera/Pictures lock feature.

n n n

Lock Camera to lock camera operation.

Lock Pictures to lock access to files in My Albums.

Lock All to lock camera operation and access to

Pictures menus.

5. Security 51

Restricting Calls

You can restrict phone numbers your phone dials or receives.

(This setting does not apply to 111 or Customer Service.)

1.

Select

> Settings > More... > Restrict and Lock

.

2.

Select Voice, and then enter your lock code.

3.

Select Restrict > Incoming Calls or Outgoing Calls.

4.

Select an option and press :

n

Allow All to make or receive all calls.

n n

Contacts Only to make or receive calls to or from

Contacts entries, voicemail, or special numbers only.

Special #s Only to make or receive calls to or from three special numbers only. (You must register the numbers beforehand. See “Using Special Numbers” below.)

Note: Restricted incoming calls are forwarded to voicemail.

Using Special Numbers

You can save up to three special numbers on your phone. You can make or receive calls to or from special numbers even when your phone is locked.

To add or edit a special number:

1.

From the Security menu, select Special Numbers.

2.

Select a field to enter or edit the number.

3.

Enter or edit the number and press

> Done

(left softkey).

Note: There are no speed dial options associated with special numbers.

You cannot make calls to or receive calls from special numbers if Voice is set to Locked in Restrict and Lock.

52 5. Security

Deleting Phone Content

1.

From the Security menu, select Delete/Reset.

2.

Select an option and press :

n

Delete Web Cookies to delete all Web cookies saved in the phone.

n

Delete Web History to delete all Web history saved in the phone.

n n n

Delete Web Cache to delete all Web cache memory saved in the phone.

Delete Contacts to delete all of your Contacts entries.

Delete My Content to delete all items you have downloaded to your phone.

n n n

Delete Pictures to delete all pictures saved in the phone.

Delete Voice Data to delete all voice data and call memos saved in the phone.

Delete Message to delete all text messages (including locked ones) in the Inbox, Sent Mail, Pending, Drafts, and your defined folders; all Recent Lists; and all usercreated preset messages.

3.

Read the disclaimer and press OK (left softkey) to continue.

4.

If you are certain you would like to delete, press Yes (left softkey).

5. Security 53

Resetting Phone Content

1.

From the Security menu, select Delete/Reset.

2.

Select an option and press :

n n

Reset Browser to reset your Web browser’s history, bookmarks, cookies, auto-complete text, and URLs.

Reset Favourites to reset all My Favourites settings.

n n n

Reset Picture Msg to reset your Picture Message account.

Reset All Settings to restore all the factory defaults, including ringer types and display settings. Contacts,

History, Calendar, and Messaging are not affected.

Reset Phone to reset all settings and delete all data on your phone.

3.

Read the disclaimer and press OK (left softkey) to continue.

4.

If you are certain you would like to reset, press Yes (left softkey).

Lost or Stolen Phones

To report your phone missing, call Telecom Customer

Services at 0800 800 163. They will be able to put a bar on your phone to disable it from being used. You will be asked to load a password that will need to be repeated if you find or recover your phone. It is important that you keep this password confidential.

To minimise the inconvenience of losing your Contacts details, please keep a separate record of the information.

54 5. Security

Security Features for Internet

Enabling and Disabling Internet Services

You can disable Internet services without turning off your phone; you will not have access to all Internet services, including Web and email. Disabling Internet will avoid any charges associated with Internet services. While signed out, you can still place or receive phone calls, check voicemail, and use other voice services. You may enable Internet services again at any time.

To disable Internet services:

1.

Select

> Settings > More... > Internet > Disable

. (A message will appear.)

2.

Press Disable (right softkey) to confirm that you want to sign out.

To enable Internet services:

1.

Select

> Settings > More... > Internet > Enable

. (A message will appear.)

2.

Press OK (left softkey) to sign in.

Locking Internet Services

You can lock access to internet services.

1.

Select

> Settings > More... > Restrict and Lock

.

2.

Select Internet > Off and Lock, and then enter your lock code.

3.

Select Locked. (Select Unlocked to deactivate this feature.)

5. Security 55

6. History

Viewing History

History shows up to the 60 most recent phone calls you have placed, received, or missed. Each history entry contains the phone number (if available) and Contacts entry name (if the phone number is in your Contacts). Duplicate calls (same number and type of call) may only appear once on the list.

To display History:

©

From standby mode, press or .

– or –

Press

> History

.

The current day’s history appears under Today, and the previous day’s history appears under Yesterday. Other history includes date information.

Note: History records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s History. Also, the phone numbers from calls identified as Private will not be recorded.

You can access your Contacts list by selecting Go to Contacts.

History Icon Indication

You can determine the type of phone call that was placed, accepted, or missed from the icons shown below.

v v v

– Incoming Call

– Outgoing Call

– Missed Call

History Thread

The History thread screen shows all history of a selected history entry.

To display a History thread:

©

From the History list display, select the entry you wish to view and press .

Tip: Text messages are included in the History thread.

56 6. History

History Details

To display History details:

©

From a History thread display, select an entry and press .

The History details screen shows the call type, phone number, and date and time of the call. An onscreen menu may also appear according to the type of call. (See “History Menu

Options” below.)

To make a call from History details screen, press .

History Menu Options

You may see several menu items on the onscreen menu or by pressing Options (right softkey):

v

Call to dial the phone number.

v v

Call:Speaker On to dial the phone number in speakerphone mode.

Save Contact to save a phone number. (See “Saving a Phone

Number From History” on page 58.)

v v v v v v

ContactDetails to display the matching Contacts entry (if applicable).

Prepend to add numbers to the beginning of the phone number. (See “Prepending a Phone Number From History” on page 59.)

Delete to delete an entry.

Delete All to delete all entries in the History. (See “Deleting

History” on page 59.)

Send Message to send a text or a picture message. (See pages 89 and 100.)

New Group to access a group entry menu to create a new group entry. (See “Making a New Group Entry From History” on page 59.)

6. History 57

Making a Call From History

1.

From the History list display, highlight an entry you want to call.

2.

Press or .

Saving a Phone Number From History

1.

From the History list display, highlight an entry you want to save and press Options (right softkey) > Save Contact.

2.

Select New Entry or Existing Entry:

n

New Entry to create a new Contacts entry for the number.

n

Existing Entry to save the number to an existing entry.

(This step is not necessary on the very first entry in your

Contacts.)

3.

If New Entry was selected, select a phone type, and then use the keypad to enter the new entry name and press .

– or –

If Existing Entry was selected, select an existing entry to which you want to save the number, and then select a phone type and press .

4.

Press Done (left softkey).

Note: You cannot save phone numbers from calls identified as Private.

58 6. History

Making a New Group Entry From History

1.

From the History list display, press Options (right softkey) >

New Group

.

2.

Read the message and press Start (left softkey).

3.

Scroll through the list and press for each selection. (A check mark will appear in the box next to the selected entry.)

Tip: Press Options (right softkey) > Enter New Addr or Contacts to enter a new address or to select an entry from your Contacts.

4.

When you have marked all the entries you want to add, press Continue (left softkey).

5.

Enter a name for the new group and press .

6.

Press Save (left softkey) to save the group entry.

Prepending a Phone Number From History

If you need to make a call from History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number.

1.

From the History list display, highlight an entry and press

Options

(right softkey) > Prepend.

2.

Enter the prefix and press or to call the number.

Deleting History

1.

From the History list display, highlight an entry you wish to delete and press Options (right softkey) > Delete. (Select

Delete All if you wish to delete all entries in your History.)

2.

If you are certain you want to delete the History, press Delete

(left softkey).

6. History 59

7. Contacts

About Contacts

Your phone can store up to 300 Contacts entries. Contacts can store up to 500 phone numbers, 600 email addresses, and 300 Web addresses.

You can create two types of Contacts entries:

v

Personal Contacts Entries

(for individual Contacts). Each entry can contain up to seven phone numbers, two email addresses, and one Web address.

v

Group Entries to send a text or picture message to up to 25 group members simultaneously.

Viewing Contacts

To display the Contacts list:

©

Press Contacts (right softkey).

– or –

Select

> Contacts

.

If a personal entry is highlighted, the main (default) phone number will be displayed. A group entry is indicated by a icon and the number of group members will be displayed if highlighted.

To display a Contact Details/Group Details screen:

©

From the Contacts list display, select an entry and press .

Each information stored in personal Contacts entries offers onscreen menu. (See “Contacts Menu Options” on page 63.)

To display an onscreen menu:

©

From the Contact Details screen display, select an item and press .

Viewing History From Contacts

You can view the history of the selected personal Contacts entry from the Contacts list.

©

From the Contacts list display, highlight a personal entry and press Options (right softkey) > Contact History.

60 7. Contacts

Creating a New Contacts Entry

Creating a Personal Contacts Entry

Shortcut: Enter the phone number in standby mode and press . Proceed with steps 2-4 in “Saving a Phone Number” on page 21.

1.

From the Contacts list display, select Add New > New Contact.

2.

Enter a name for the new entry and press the navigation key down.

3.

Enter the phone number for the entry and press .

4.

Select a phone type for the entry (Mobile, Home, Work, Pager,

Fax

, or Other) and press .

5.

Press Done (left softkey).

Creating a Group Entry

You can create a group entry by giving it a name and assigning members to it.

1.

From the Contacts list display, select Add New > New Group.

2.

Read the message and press Start (left softkey).

3.

Scroll through the list and press for each selection.

(A check mark will appear in the box next to the selected entry.) Each entry’s default phone number is assigned.

n

To select another phone number in the entry, press the navigation key right or left.

Tip: Press Options (right softkey) > Enter New Addr or Recent History to enter a new address or to select an entry from your Recent History.

4.

When you have marked all the entries you want to add, press Continue (left softkey).

5.

Enter a name for the new group and press .

6.

Press Save (left softkey) to save the group entry.

7. Contacts 61

Finding Contacts Entries

There are several ways to display your Contacts entries: by name, by Automatic Speech Recognition (ASR), by speed dial number, and by group. Follow the steps outlined in the following sections to display entries from the Contacts menu.

Finding Contacts by Names

1.

Press Contacts (right softkey).

2.

Scroll through all the entries using your navigation key.

– or –

Enter the first letter or part of a name. (The more letters you enter, the more your search narrows.)

3.

To display an entry, select it and press .

4.

To make a call, select a number and press or .

Finding Contacts by Automatic Speech Recognition (ASR)

1.

Press and hold or .

2.

Say “Call” and then the name you would like to find. If the software finds multiple matches, a list of the most likely names is displayed. You will hear the voice prompt “Did you say…” followed by the matched name.

3.

Say “Yes” to confirm the name, or “No” to change the selection.

Note: Your phone will automatically place a call if only one name or number matches your input.

Finding Group Entries

1.

Press Contacts (right softkey).

2.

Scroll through the group entries using your navigation key.

To display Contacts entries belonging to a group, highlight the group and press .

3.

To dial the phone number assigned to each entry in the group, select an entry and press or .

62 7. Contacts

Finding Speed Dial Numbers

1.

Select

> Settings > More... > Contacts > SpeedNumbers

.

See “Using Speed Dialling” on page 24 for how to use speed dialling.

2.

Scroll through speed dial entries. Speed dial numbers are displayed in numeric order.

3.

To dial the phone number assigned to a speed dial number, press or .

Contacts Menu Options

The following menu options might be available as onscreen menus or by pressing Options (right softkey) on the Contacts list display or the Contact Details/Group Details screen display

(see “Viewing Contacts” on page 60). Some options appear at more than one level of the Contacts displays:

Contacts list options: v v v v v v v v v v

New Group to create a new group entry. (See “Creating a

Group Entry” on page 61.)

Edit Contact to edit the selected Contacts entry. (See “Editing a Contacts Entry” on page 67.)

Edit Group to edit the selected group entry.

Delete Contact to delete the selected Contacts entry.

(See “To delete a personal Contacts or a group entry” on page 68.)

Delete Group to delete the selected group entry.

Contact History to display the selected Contacts entry’s history. (See “Viewing History From Contacts” on page 60.)

Send Message to send a text or a picture message to the selected Contacts entry.

Send Contact to send the selected Contacts entry via

Bluetooth.

Set as Secret to make the selected entry secret. (See “Secret

Contacts Entries” on page 69.)

Settings to display the Settings menu.

7. Contacts 63

Contact Details/Group Details screen options: v v v v v v v v

Edit to edit the selected Contacts information.

Prepend to add numbers to the beginning of the selected number. (See “Prepending a Phone Number From History” on page 59.)

Delete # to delete the selected phone number.

Call Alarm to set a call alarm to the selected phone number.

Set Speed Dial to assign a speed dial number to the selected phone number.

Set as Main # to set the selected number as the main (default) number for the Contacts entry.

View History to view the history of the selected Contacts entry.

ContactDetails to display the matching Contacts entry.

Onscreen menus: v v v v v v v v v v

Call to call the selected phone number.

Set # Type to select a number type (mobile, home, etc.).

Launch to connect to a selected URL.

Set as Favour.

to set a selected URL as My Favourites.

Play to play the selected ringer.

Preview to preview the selected animation ringer (if applicable).

Stop to stop playing the ringer.

Change to select a new ringer.

Use Default to select a default ringer.

Clear to delete a current memo or address.

64 7. Contacts

Managing Contacts Entries

Adding a Phone Number to a Personal Contacts Entry

1.

From the Contacts list display, highlight the entry to which you wish to add a phone number and press Options (right softkey) > Edit Contact.

2.

Scroll down to highlight <Add Number> and enter the new phone number and press .

3.

Select a phone type for the number and press .

4.

Press Done (left softkey).

Adding Members to a Group Entry

You can add group members to an existing group entry. Each group can include up to 40 members. You can enter a group member directly or select the member from your Contacts.

1.

From the Contacts list display, scroll to the group you want to add members to.

2.

Press Options (right softkey) > Edit Group > Add More.

3.

Read the message and press Start (left softkey).

4.

Highlight each member you want to add and press for each selection. (A check mark will appear in the box next to the selected member.) Each member’s default phone number is assigned.

n

To select another number stored in each member’s entry, press the navigation key right or left.

5.

Press Continue (left softkey) > Save (left softkey).

7. Contacts 65

Assigning Speed Dial Numbers

Your phone can store up to 98 phone numbers in speed dial locations. (For details on how to make calls using speed dial numbers, see “Using Speed Dialling” on page 24.)

1.

From the Contacts list display, select an entry that has a phone number to which you would like to assign a speed dial and press .

2.

Highlight the number and press Options (right softkey) >

Set Speed Dial

.

3.

Select an available speed dial location and press .

– or –

1.

Select

> Settings > More... > Contacts > SpeedNumbers

.

2.

Select an available speed dial location and press .

3.

Select an entry from the list and press . The entry’s default phone number is assigned.

n

To select another phone number in the entry, press the navigation key right or left.

Note: If you attempt to assign an already in-use speed dial location to a new phone number, a message or a choice, depending on the steps you take, will appear to replace the existing speed dial assignment. Select Replace (left softkey) or Replace to overwrite.

66 7. Contacts

Editing a Contacts Entry

To edit a personal Contacts entry:

1.

From the Contacts list display, highlight the entry you wish to edit.

2.

Press Options (right softkey) > Edit Contact.

3.

Select the field you want to edit, and then add or edit the information and press .

4.

Press Done (left softkey).

To edit a group entry:

You can change the group name, the assigned image, or add new members to the group.

1.

From the Contacts list display, highlight the group you want to edit.

2.

Press Options (right softkey) > Edit Group.

3.

Change the group name or the image. (See “Adding

Members to a Group Entry” on page 65 to add a member.)

4.

Press Save (left softkey) to save your changes.

Assigning an Image to a Contacts Entry

You can assign an image to a Contacts entry. The image is displayed when the entry calls you.

1.

From the Contacts list display, select the entry to which you want to assign an image and press .

2.

Press the navigation key to highlight the icon and press .

3.

Select Select Image.

4.

Select an option and press .

5.

Select an image and press , and then press OK (left softkey) to assign.

7. Contacts 67

Deleting a Contacts Entry

To delete a personal Contacts or a group entry:

1.

From the Contacts list display, highlight the entry you wish to delete.

2.

Press Options (right softkey) > Delete Contact or Delete Group >

Yes

(left softkey).

To remove a member from a group entry:

1.

From the Contacts list display, scroll to the group from which you want to delete the member.

2.

Press Options (right softkey) > Edit Group.

3.

Highlight the member you want to delete and press Options

(right softkey) > Remove from Gr. > Yes (left softkey).

4.

Press Save (left softkey).

Selecting a Ringer Type for a Personal Contact Entry

You can assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer Types” on page 32.)

1.

From the Contacts list display, highlight the entry to which you would like to assign a ringer and press .

2.

Scroll to the current ringer type and press to display the ringer menu.

3.

Select Change.

4.

Select an option and press .

5.

Select a ringer and press .

68 7. Contacts

Secret Contacts Entries

You can hide an entry by making it secret. The entry is not displayed in your Contacts. In History, a telephone number is displayed but the Contacts entry's name is not.

To make an entry secret:

1.

From the Contacts list display, highlight a Contacts entry.

2.

Select Options (right softkey) > Set as Secret.

3.

Select On.

4.

From the Contacts list, press Options (right softkey) >

Settings > Hide Secret

.

5.

Enter your four-digit lock code.

To make an entry public:

1.

From the Contacts list display, press Options (right softkey) >

Settings > Show Secret

.

2.

Enter your four-digit lock code.

Note: If you make an entry secret, calls cannot be made to that entry if

Contacts Only is selected in Settings > More... > Restrict and Lock >

Voice > Restrict > Outgoing Calls or Incoming Calls (see page 52).

Tip: If you never changed the lock code number and you cannot recall your lock code, try using the last four digits of your phone number.

Dialling Services

Your Contacts list is preprogrammed with contact numbers for various services.

1.

Select

> Settings > More... > Contacts > Services

.

2.

Select Customer Service, Dir Assistance, or Account Info.

3.

Press or .

7. Contacts 69

8. Personal Organiser

Using Your Phone’s Calendar

Use the Calendar to remind you of events or important calls you need to make. You can schedule up to 100 events, 15 Call

Alarms and 20 To Do items.

Displaying Your Calendar

©

Select

> Tools > Calendar

.

Note: To display your calendar in a no-service area, set the actual time and date, and then press OK (left softkey) in the “Set Current Time/Date” screen.

Setting Holidays

To set a holiday:

1.

From the Calendar display, highlight the date you want to set as a holiday.

2.

Press Options (right softkey) > Holiday.

3.

Select an option and press :

n

Set Date to set the holiday for the date.

n

Set Weekly to set the holiday for the same day every week. Press Yes (left softkey) to set a weekly holiday.

To edit added holidays:

1.

From the calendar display, highlight a day you have set as a holiday.

2.

Press Options (right softkey) > Holiday.

3.

Select an option and press :

n

Reset Date to reset (clear) a holiday for the highlighted date only.

n n

Reset Weekly to reset a holiday that recurs on the same day each week. Press Yes (left softkey) to clear the weekly holiday.

Reset All to reset all added holidays. Press Yes (left softkey) to clear.

70 8. Personal Organiser

Adding an Event to the Calendar

1.

From the Calendar display, highlight the day to which you want to add an event.

2.

Press Options (right softkey) > Add Event > Schedule.

3.

Select any of the following items you want to set and press :

n

Description to enter a description of the event.

Tip: You can retrieve a description from the To Do List by pressing Mode (right softkey) > From To Do, once you have stored To Do items to the To Do List.

n n n n n n

From to set a start time for the event.

To to set an end time for the event.

Location to add a location for the event.

Alarm to select a ringer type for the alarm.

Alarm Time to edit the alarm time (number of hours or minutes before the event starts). The default alarm time is ten minutes before an event.

Repeat to select a repeating status for the event (Once,

Daily

, Weekly, Monthly, or Yearly).

4.

Press Save (left softkey) to save the event.

Tip: Days with events scheduled are indicated by a small

©

just to the left of the date.

Press the navigation key up or down to scroll through the calendar by week, and the volume key on the side of the phone by month.

8. Personal Organiser 71

Adding a Call Alarm to the Calendar

To add a call alarm to the calendar:

1.

From the Calendar display, highlight the day to which you want to add a call alarm and press Options (right softkey).

2.

Select Add Event > Call Alarm.

3.

Enter the phone number directly or press Options (right softkey) > From Contacts or Voicemail:

n n

From Contacts to select a number from your Contacts.

Voicemail to select a number for voicemail access.

4.

Select the items you want to edit and press :

n

Time/Date to edit the start time and date.

n n

Alarm to select the ringer alarm.

Repeat to set the Call Alarm’s repeating status (Once,

Daily

, Weekly, Monthly, or Yearly).

5.

Press Save (left softkey).

Tip: You can also add a call alarm from the Contacts menu. (See “Contacts

Menu Options” on page 63.)

To respond to a call alarm:

©

Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.)

©

Press and hold the side camera key to cancel snoozing.

©

Press Dismiss (right softkey) to dismiss the alarm.

Tip: To change the alarm settings from the calendar view, press Options (right softkey) > Settings to set the ringer length and snooze options.

To call the phone number at the time of a call alarm notification:

©

Press or to dial the phone number (if applicable).

72 8. Personal Organiser

Adding To Do List Items

Your phone can store and manage up to 20 To Do List items.

1.

From the Calendar display, press Options (right softkey).

2.

Select To Do List > Options (right softkey) > Add Item.

3.

Enter a description and press .

4.

Select Priority to edit the To Do’s priority (Normal, Urgent, or

Done

).

5.

Press Save (left softkey).

Adding a To Do List Item to the Schedule

1.

From the Calendar display, press Options (right softkey) >

To Do List

.

2.

Highlight the item you want to add to the schedule and press Options (right softkey).

3.

Select Add to Schedule.

4.

Modify the description field (if desired), and set the other fields using your keypad and press . (See “Adding an

Event to the Calendar” on page 71.)

5.

Press Save (left softkey).

Deleting To Do Items

1.

From the Calendar display, press Options (right softkey) >

To Do List

.

2.

Highlight a To Do item, press Options (right softkey) and select an option:

n

Delete Item to delete the selected To Do item.

n n

Del. Selection to delete selected To Do items.

Select the items by highlighting and pressing

>

Delete

(left softkey).

Delete All to delete all To Do items.

3.

Press Yes (left softkey).

8. Personal Organiser 73

Event Alerts

When your phone is turned on and you have an event alarm scheduled, your phone alerts you and displays the event summary. There are several ways your phone alerts you to scheduled events:

v v v

By playing the assigned ringer type.

By illuminating the backlight.

By flashing the LED.

To respond to an event alert:

©

Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.)

©

Press and hold the side camera key to cancel snoozing.

©

Press Dismiss (right softkey) to dismiss the alarm.

Note: To change the alert settings from the calendar view, press Options (right softkey) > Settings to set the ringer length and snooze options.

Viewing Events

Note: Schedule (see page 71) and Call Alarm (see page 72) will be displayed.

1.

From the Calendar display, highlight the day for which you would like to view events and press . (If you have multiple events scheduled for the selected day, they will be listed in chronological order.)

Tip: Days with events scheduled are indicated by a small

©

just to the left of the date.

2.

To display the details of an event listed in the schedule, highlight the event and press .

74 8. Personal Organiser

Event List Options

While you are displaying the day’s events list, press Options

(right softkey) to access the following options:

v

Add Event to add a schedule or Call Alarm to the calendar.

v v v v v

Delete Event to delete the selected schedule or Call Alarm from the list.

To Do List to display the To Do List on the calendar.

Go to Date to jump to another date on the calendar.

View Memory to view the memory status saved in the phone.

Delete Memory to delete memory saved in the phone.

Deleting Events

To delete a day’s scheduled events:

1.

From the Calendar display, select the day for which you would like to delete events and press .

2.

Highlight an event and press Options (right softkey) >

Delete Event > Yes

(left softkey).

To delete old scheduled events:

©

From the Calendar display, press Options (right softkey) >

Delete Memory > Delete Old > Yes

(left softkey).

To delete all scheduled events:

1.

From the Calendar display, press Options (right softkey) >

Delete Memory > Delete All

. (An alert will be displayed asking you to confirm the deletion.)

2.

Press Yes (left softkey) to delete all events.

Note: All events are deleted including Call Alarms (see page 72) and To Do List items (see page 73).

Going to a Specified Date

1.

From the Calendar display, press Options (right softkey) >

Go to Date

.

2.

Enter a date and press .

8. Personal Organiser 75

Using Your Phone’s Tools

Using the Alarm Clock

To set the alarm clock:

1.

Select

> Tools > Alarm Clock

.

Note: To set the alarm clock in a no-service area, set the actual time and date, and then press OK (left softkey) in the “Set Current Time/Date” screen.

2.

Select an alarm number and press .

3.

Select the items you want to edit and press :

n

Description to enter a description of the alarm.

n n n

Time to enter the alarm time.

Repeat to select the alarm frequency.

Alarm to set the alarm to On or Off.

4.

Press Save (left softkey) to save the alarm settings.

Tip: Press the left softkey (On or Off) to toggle the alarm on and off.

To change the alarm settings, press Settings (right softkey) to set the ringer length and snooze options.

To respond to the alarm:

©

©

©

Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.)

Press and hold the side camera key to cancel snoozing.

Press Dismiss (right softkey) to dismiss the alarm.

Tip: This feature is not available while your phone is turned off.

76 8. Personal Organiser

Using the Countdown Timer

This feature allows you to use the countdown timer with alarm capabilities. You can set up to five timers.

To set the countdown timer:

1.

Select

> Tools > Countdown

.

2.

Select a countdown timer number and press .

3.

Select items to edit and press :

n

Description to enter a description of the countdown.

n n

Time to enter the countdown time.

Alarm to set the countdown alarm to On or Off.

4.

Press Save (left softkey) to save the countdown settings.

To respond to the alarm:

©

Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.)

©

Press and hold the side camera key to cancel snoozing.

©

Press Dismiss (right softkey) to dismiss the alarm.

Tip: Press the left softkey (On or Off) to toggle the countdown alarm on and off.

To change the alarm settings, press Settings (right softkey) to set the ringer length and snooze options.

This feature is not available while your phone is turned off.

8. Personal Organiser 77

Using the Stopwatch

To start the stopwatch:

©

Select

> Tools > Stopwatch

.

n

Press Start (left softkey) to start the stopwatch.

n n

Press Stop (left softkey) to stop the stopwatch.

Press Resume (left softkey) to restart the stopwatch.

To record a lap time while the stopwatch is running: n n

Press Lap (right softkey) to record the first lap time.

Press Lap (right softkey) again to record the next lap.

(Up to five lap times can be saved. If you continue recording, lap times will be deleted from the oldest.)

To display the stopwatch options:

1.

From the Stopwatch display, press Options (right softkey).

2.

Select an option and press :

n

Go to Lap List to display a saved Lap List. Press Detail

(left softkey) to display the Lap List details.

n n

Save to LapList to save recorded lap times (if applicable).

Reset to reset the time to zero and clear any recorded lap times.

Using the World Clock

1.

Select

> Tools > World Clock

.

2.

Press the navigation key right or left to scroll through different time zones.

Tip: Press Summer (left softkey) or Standard (right softkey) for changing between summer and standard time, if applicable. The icon is shown while summer time is displayed.

78 8. Personal Organiser

Using the Calculator

1.

Select

> Tools > Calculator

.

2.

Enter numbers using your keypad. Press the left softkey to insert a decimal point.

3.

Press the appropriate navigation key for an arithmetic option. (Up for addition, Down for subtraction, Left for multiplication, and Right for division.)

4.

Enter numbers and press for the result.

n

To clear the numbers, press CLR (right softkey).

8. Personal Organiser 79

9. Voice Services

Using Automatic Speech Recognition (ASR)

Your phone is equipped with Automatic Speech Recognition

(ASR) that allows you to make calls or launch phone functions using your voice. All you have to do is to talk into the phone, and ASR will recognise your voice and complete tasks by itself.

Activating ASR

To activate ASR with the phone open:

©

From standby mode, press and hold or .

To activate ASR with the phone closed:

©

Connect your phone to an optional headset and press, or press and hold, the activation button on the headset.

The screen displays “Say a command” and the phone prompts you to say the name of the command you want to use. To complete your task, simply follow the voice prompts.

Available ASR commands are:

v v

Call

<Name or #> to call an entry in your Contacts list or to the phone number you say. (See page 81 for details.)

Go To

<Menu> to jump directly to the menu items or applications. (See page 81 for details.)

v

Check

<Item> to check your phone’s status. (See page 82 for details.)

Note: Use ASR in a quiet environment so it can accurately identify your voice.

Tip: During ASR operation, press Help (left softkey) to get instructions for using the software.

80 9. Voice Services

Making a Voice Call Using ASR

With ASR, you can make a voice call by reciting a name or a phone number.

1.

Press and hold or .

2.

If you hear “Say a command,” say “Call.”

3.

If you hear “Say the name or number,” say a name or a phone number.

4.

If you hear “Which Location?,” say a phone type (for example, “Mobile”).

Shortcut: The above steps can be said in sequence (for example, “Call, John

Jones, Mobile”).

Note: If ASR does not recognise the name or number, it will find the most likely matches and display a list of up to three names or numbers. You will hear “Did you say…” followed by the name or number. You can confirm by saying “Yes.”

Say “No” to change the selection.

Opening Menus Using ASR

You can jump directly to 17 menu items or applications by saying “Go to” followed by a menu option.

1.

Press and hold or .

2.

If you hear “Say a command,” say “Go to.”

3.

If you hear “Which shortcut?,” say an application name (for example, “Messaging”).

Shortcut: The above steps can be said in sequence (for example, “Go to,

Messaging”).

Tip: When you display a Command menu, say “More options” to display additional commands.

9. Voice Services 81

Checking Phone Status Using ASR

You can use ASR to obtain information about your phone:

v

My Phone Number

v v

Network

Signal Strength

v v

Battery

Status (all of the above except phone number)

1.

Press and hold or .

2.

If you hear “Say a command,” say “Check.”

3.

If you hear “Which status item?,” say a command.

ASR Options

To change ASR confirmation:

1.

Press and hold or .

2.

Press Settings (right softkey) > Confirmation and select an option:

n

Automatic to ask for confirmation only when the system is not sure what you said.

n n

Always Confirm to always ask for confirmation.

Never Confirm to never ask for confirmation.

To adapt the system to your voice:

1.

Press and hold or .

2.

Press Settings (right softkey) > Adaptation > Adapt Voice.

3.

Press Start (left softkey) and repeat each word, phrase, or telephone number you hear.

To reset the adaptation:

1.

Press and hold or .

2.

Press Settings (right softkey) > Adaptation > Reset Voice.

3.

Read a message and press Yes (left softkey) if you are certain you would like to reset.

82 9. Voice Services

To change ASR mode:

1.

Press and hold or .

2.

Press Settings (right softkey) > Modes and select an option:

n

Expert Mode to sound a beep only.

n n

Prompt Mode to prompt for required information.

Readout Mode to prompt for required information and to read aloud the content displayed on the Main Screen.

To display ASR software version:

1.

Press and hold or .

2.

Press Settings (right softkey) > About.

9. Voice Services 83

Managing Voice/Call Memos

You can use your phone’s voice recording to record brief memos to remind you of important events, phone numbers, or grocery list items and to record the other party’s voice during a phone call.

Recording Voice Memos

To record a voice memo:

1.

Select

> Tools > Voice Memo > Record

.

2.

Start recording after the beep.

To stop recording:

©

Note: Your phone can store up to 100 voice memos. The maximum recording time is up to three minutes.

Recording Call Memos

1.

During a call, press Options (right softkey) > Call Memo Rec.

2.

Start recording after the beep.

3.

To finish recording, press or

n

.

Recording also stops when the call is disconnected.

Note: Only the other party’s voice is recorded during this process.

Voice/Call Memo Options

1.

Select

> Tools > Voice Memo > List

.

2.

Select a voice memo and press Options (right softkey).

3.

Select an option and press :

n

Play to play selected voice memos or all voice memos.

n n n

This to play the selected memo.

Multiple to play selected memos.

All to play all memos.

Note: Press Slow (left softkey) or Fast (right softkey) to change playing speed.

84 9. Voice Services

n n n n n n

Speaker On or Speaker Off to activate or deactivate the speakerphone mode.

Edit Title to edit the title of a voice memo.

Properties to display information about a voice memo.

Type Filter to display only voice memos or only call memos.

Sort by to sort voice memos by time recorded, name, or file size.

Delete to delete either selected memos or all memos.

Deleting Voice/Call Memos

To delete an individual voice/call memo:

1.

Select

> Tools > Voice Memo > List

.

2.

Highlight the memo you want to delete and press Options

(right softkey) > Delete > This > Yes (left softkey).

To delete multiple voice/call memos:

1.

Select

> Tools > Voice Memo > List

.

2.

Press Options (right softkey) > Delete > Multiple.

3.

Select the memos you want to delete and press Delete (left softkey) > Yes (left softkey).

To delete all voice/call memos:

1.

Select

> Tools > Voice Memo > List

.

2.

Press Options (right softkey) > Delete > All > Yes (left softkey).

Setting the Recording Mode

This feature allows you to match the sensitivity of the microphone to the type of recording you are making.

1.

Select

> Tools > Voice Memo > Rec. Mode

(right softkey).

2.

Select an option and press :

n

Dictation to record a single voice.

n

Conference to record multiple voices.

9. Voice Services 85

Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded announcement, either a prerecorded one or one that you record. You can also record the caller’s message.

Activating Screen Call

To start Screen Call when you have an incoming call:

©

When the phone rings or vibrates, press Options (right softkey) > Screen Call.

To screen calls automatically:

1.

Select

> Tools > Voice Memo > Screen Call > Auto > On

.

2.

Set the answer delay by using numeric keys or by pressing the navigation key up or down.

3.

Press or (left softkey). The icon is displayed on the screen.

Tip: While the caller’s message is being recorded, press to answer the call, or press to stop recording and disconnect the call.

Selecting an Announcement for Screen Call

1.

Select

> Tools > Voice Memo > Screen Call > Announcement

.

2.

Select Pre-Recorded or Custom.

Recording Your Name for a Prerecorded Announcement

1.

Select

> Tools > Voice Memo > Screen Call > Announcement

.

2.

Highlight Pre-Recorded and press Edit (right softkey) >

Record Name

.

n

If your name has already been recorded, select Yes or

No for overwriting.

3.

Press to start the first recording. (The maximum recording time is 12 seconds.)

4.

Press to stop recording.

86 9. Voice Services

5.

After the first recording, press again to start the second recording.

6.

Press to stop recording.

Recording a Customised Announcement

1.

Select

> Tools > Voice Memo > Screen Call > Announcement

.

2.

Highlight Custom and press Edit (right softkey) > Record.

n

If your announcement has already been recorded, select Yes or No for overwriting.

3.

Press to start the first recording. (The maximum recording time is 12 seconds.)

4.

Press to stop recording.

5.

After the first recording, press again to start the second recording.

6.

Press to stop recording.

Reviewing an Announcement

1.

Select

> Tools > Voice Memo > Screen Call > Announcement

.

2.

Highlight Pre-Recorded or Custom and press Edit (right softkey) > Play or Play:Speaker.

Deleting an Announcement

1.

Select

> Tools > Voice Memo > Screen Call > Announcement

.

2.

Highlight Pre-Recorded or Custom and press Edit (right softkey).

3.

Select Delete Name or Delete. (A confirmation will be displayed.)

4.

Press Yes (left softkey).

9. Voice Services 87

10. Messaging

New Messages

©

When you receive a text message, it will automatically appear on your phone’s screen with the icon. When you receive a picture message, the information of the message appears on your phone’s screen with the icon. Press

View

(left softkey) to view the message.

Note: When there are two or more notifications, a Missed Alerts list is displayed in standby mode. Highlight a text/picture message in the list and press View

(left softkey) to display the message details.

Use your navigation key to scroll down and view the entire message:

v v v

Press Call (left softkey) to dial the callback number.

Press Reply (left softkey) to reply to the sender.

Press Options (right softkey) to display options.

Note: The phone number contained in the received text body will only save successfully if it contains no spaces.

Displaying Messages

To display a text message from the main menu:

1.

Select

> Messaging > Text

.

2.

Select Inbox, Sent Mail, Pending, Drafts, or your defined folder and press .

3.

Select the message you want to see and press . display the message options, press Options [right softkey].)

Tip: Press the navigation key right or left to read the next or previous message from the message detail display (Inbox, Sent Mail, and your defined folders only).

To display a picture message from the main menu:

1.

Select

> Messaging > Picture Msg

.

2.

Select Inbox, Sent Msg, or Saved Msg and press .

3.

Select your desired picture message and press .

88 10. Messaging

Sending a Text Message

1.

Select

> Messaging > Send Message > Text Message

. (A

Recent List is displayed.)

2.

Select a recipient from the Recent List and press , or select one of the following options:

n

Go to Contacts to select a recipient from your Contacts.

(Qualifying Contacts entries must contain a phone number or an email address.) Select a Contacts entry and press .

n

Group

(left softkey) to select multiple recipients. After selecting recipients, press Continue (left softkey) to proceed.

n

New Addr.

(right softkey) to enter a recipient’s phone number or email address directly.

3.

Compose a message.

n

Use your keypad to type your message. Press Mode

(right softkey) to select a character input mode. (See

“Selecting a Character Input Mode” on page 25.)

4.

Press Options to select additional options.

5.

Review your message and press Send (left softkey).

Tip: You can also send a text message when the left softkey displays the

Send Msg option.

10. Messaging 89

Creating Folders for Messages

You can create up to ten folders to store your messages.

When ten of your defined folders exist, the Create Folder option will not appear.

To create a new folder:

1.

Select

> Messaging >Text

.

2.

Press Options (right softkey) > Create Folder.

3.

Enter a folder name and press .

4.

Press Save (left softkey).

To set an optional feature for the added folder:

1.

During step 3 above, scroll down to select other menu options:

n

Auto Filing to file messages into the folder automatically.

The following options appear when this feature is set to

On

.

n

Keyword to set a keyword for Auto Filing. Enter a keyword and press .

n n

Notify to set the notification display to On or Off when you have an unread message matching the defined folder.

Envelope Icon to set the envelope icon display to On or

Off when you have an unread message matching the defined folder.

2.

Press Save (left softkey).

Locking and Unlocking Messages

The Inbox and your defined folders combined can contain up to 200 messages in total and the oldest messages will automatically be deleted once the capacity is full. You can lock up to 40 messages in order to avoid this automatic deletion.

A key icon appears for locked messages.

1.

Select

> Messaging > Text

.

2.

Select Inbox or your defined folders.

3.

Highlight the message you want to lock or unlock and press

Options

(right softkey) > Lock or Unlock.

90 10. Messaging

Deleting Messages

Deleting Text Messages

To delete a text message:

1.

Select

> Messaging >Text

.

2.

Select Inbox, Sent Mail, Pending, Drafts, or your defined folder and press .

3.

Highlight a message you want to delete and press Options

(right softkey) > Delete.

4.

Select This.

Tip: This option may not be displayed if you save only one message in a folder.

To delete all messages, select All.

5.

Press Yes (left softkey).

To delete multiple text messages:

1.

Select

> Messaging > Text

.

2.

Select Inbox, Sent Mail, Pending, Drafts, or your defined folder and press .

3.

Press Options (right softkey) > Delete > Multiple.

4.

Press to select messages to be deleted.

5.

Press Delete (left softkey).

Deleting Picture Messages

1.

Select

> Messaging > Picture Msg

.

2.

Select Inbox, Sent Msg, Saved Msg, or Pending.

3.

If you select Pending, highlight the message you want to delete and press Delete (right softkey) > OK (left softkey) > OK

(right softkey).

4.

If you select the other folders, highlight the message you want to delete and press Options (right softkey) > Delete or

Remove > OK

(left softkey) > OK (right softkey).

10. Messaging 91

11. Camera

Taking Pictures

Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a key.

You can activate the phone’s camera mode and take pictures whether the phone is open or closed.

To take a picture with the phone open:

1.

Press and hold or the side camera key to activate camera mode. (Additional camera options are available through the camera mode Options menu. See “Camera

Mode Options” on page 93.)

Tip: To activate camera mode, you can also select > Pictures > Camera.

2.

Using the phone’s Main Screen as a viewfinder, aim the camera lens at your subject.

3.

Press ,

Capture

(left softkey), or the side camera key, until the shutter sounds. (The picture will automatically be saved in the In Phone folder.)

Tip: To return to camera mode to take another picture, press the side camera key.

, or

4.

Press Options (right softkey) for more options:

n n n

Take Picture to return to camera mode to take another picture.

Send Media to send your pictures. (See page 100.)

Order Prints to order prints of the pictures. You can choose whether to pick up your prints at a retail store or have them mailed to you.

Note: The Order Prints service is currently not available.

n

Post to Service to access available services. Select

Update to display the latest services.

92 11. Camera

Note: The Post to Service service is currently not available.

n n n n n

Upload to upload the picture you just took to the Xtra

Online Gallery.

Review Media to go to the In Phone folder to review your saved pictures.

Set as to assign the picture. Select an option and press

.

Delete to delete the picture you just took.

Details/Edit to edit your picture or display details relating to your pictures.

To take a picture with the phone closed:

1.

Press and hold the side camera key to activate the camera mode.

2.

Point the camera lens at your subject.

3.

Press the side camera key to take the picture.

Camera Mode Options

When the phone is open and in camera mode, press Options

(right softkey) to display additional camera options:

v

Picture Mode to select a picture mode from Normal,

Beach/Snow

, Scenery, Night/Dark or Soft Focus.

v v

Zoom to zoom in on a subject. (See “Using the Zoom” on page 95.)

Self-Timer to activate the camera’s timer. (See “Setting the

Self-Timer” on page 94.)

v v

Fun Tools to select an option from the following:

n n n

Multiple Shots to take multiple shots. (See “Taking

Multiple Shots” on page 94.)

Fun Frames to select your favourite fun picture frame to decorate your picture.

Colour Tone to select a wide variety of colour tones for the picture.

Image Controls to set the Brightness or White Balance.

11. Camera 93

v v v v

CameraSettings to select your settings. (See “Selecting

Camera Settings” on page 96.)

Review Media to go to the In Phone folder to review your saved pictures.

Key Guidance to indicate the key functions in camera mode.

User Settings to select your favourite setting. (See “Setting

Your Favourite Mode” on page 95.)

Setting the Self-Timer

To activate the self-timer:

1.

From camera mode, press Options (right softkey) >

Self-Timer

.

2.

Highlight the length of delay you want the timer to use

(10 Seconds or 5 Seconds) and press .

3.

Press or (left softkey) when you are ready to start the timer. (The icon appears on the upper right portion of the Main Screen during the self-timer countdown.)

4.

Get ready for the picture. (When the timer is down to three seconds, the self-timer icon will turn red and the phone will begin to beep.)

To cancel the self-timer after it has started:

©

Press Cancel (right softkey).

Note: While the self-timer is active, all keys are disabled except , and Cancel (right softkey).

,

Taking Multiple Shots

This feature allows you to take up to nine continuous shots in sequence. When you take multiple shots, the icon will be displayed in the viewfinder.

Note: The number of multiple shots that can be taken depends on the resolution settings.

1.

From camera mode, press Options (right softkey) >

Fun Tools > Multiple Shots

.

94 11. Camera

2.

Select the number of shots and press .

3.

Select the duration of the interval between shots (Normal or

Fast

) and press .

4.

Press , to take the pictures. (The Multiple Shots folder will be displayed with up to four thumbnail pictures per screen.)

5.

Press Options (right softkey) to display picture options, or press , , or the side camera key to return to camera mode to take another picture.

Using the Zoom

This feature allows you to zoom in on an object when you take a picture. You can adjust the zoom from 1x to 16x.

1.

From camera mode, press the navigation key right or left, or the volume key up or down to adjust the zoom. (The gauge bar appears.)

2.

Press ,

, Capture (left softkey), or the side camera key to take the picture.

Setting Your Favourite Mode

With your phone, you can customise various camera settings.

This feature allows you to save your favourite setting.

1.

From camera mode, select your favourite setting.

(See “Camera Mode Options” on page 93 and “Selecting

Camera Settings” on page 96.)

2.

Press Options (right softkey) > User Settings.

3.

Highlight an unassigned number and press Add (right softkey) > Yes (left softkey).

4.

Enter a title and press or OK (left softkey).

11. Camera 95

Selecting Camera Settings

1.

From camera mode, press Options (right softkey) >

CameraSettings

.

2.

Select an option and press :

n

Resolution to select a picture’s file size (High-480x640,

Med-240x320

, or Low-120x160).

n

Quality to select the picture quality setting (Fine, Normal, or Economy).

n n

Shutter Sound to select a shutter sound (Default,

Say “Cheese,”“Ready,” or Off).

Status Bar to switch the status bar display to On or Off.

Using the Settings & Info Menu

The Settings & Info menu allows you to set up many of the settings of your phone’s Pictures function.

To access the settings and info menu:

1.

Select

> Pictures > Settings&Info

.

2.

Select an option and press :

n

Location to select whether to include the location information.

Note: The Location feature is currently not available.

n n n n

Status Bar to select whether to display the information bar for the pictures.

Slideshow Intvl to set the slideshow interval time.

Account Info to view your account information.

Help to view the Pictures instruction page.

96 11. Camera

Camera Icon Key

Function

Beach/Snow

Icons Explanation

Use this setting in bright light.

Scenery

Picture

Mode

Night/Dark

Soft Focus

Sunny

Cloudy

White

Balance

Tungsten

Fluorescent

Manual

Use this setting for scenery at a distance.

Use this setting in low light.

Use this setting to “soften” the picture.

Use this setting in sunny weather.

Use this setting in cloudy weather.

Use this setting with incandescent lighting.

Use this setting with fluorescent lighting.

To set the white balance manually.

To set brightness manually.

For high picture resolution.

Brightness Manual

High

Resolution Medium

Low

Self-Timer

Multiple Shots

For medium picture resolution.

For low picture resolution.

Numeric countdown will appear when the self-timer has been activated.

Use this setting for multiple shots.

11. Camera 97

Storing Pictures

Your phone’s picture and storage area is called My Albums.

There are two types of folders in My Albums:

v v

In Phone

(see below)

Online Albums

(see page 102)

Copies of pictures can also be saved in the Assigned Media folder (see page 99).

In Phone Folder

Your phone’s internal storage area is called the In Phone folder. From the In Phone folder, you can view all the pictures stored there, delete files, and access additional options.

To review your pictures saved in the In Phone folder:

1.

Select

> Pictures > My Albums > In Phone

. (Thumbnails will be displayed, up to four at a time.)

2.

Use your navigation key to view and scroll through the pictures.

In Phone Folder Options

When you are viewing the In Phone folder, press Options (right softkey) to display the following options:

v v

Send Media to send your pictures. (See page 100 for details.)

Upload to upload pictures from the In Phone folder to the

Xtra Online Gallery.

v

Order Prints to order prints of the pictures. You can choose whether to pick up your prints at a retail store or have them mailed to you.

Note: The Order Prints service is currently not available.

v

Post to Service to access available services. Select Update to display the latest services.

Note: The Post to Service service is currently not available.

v v

Set as to assign the picture. Select an option and press .

Delete to delete pictures.

98 11. Camera

v v v v

Details/Edit to edit your picture or display details relating to your pictures.

Slideshow to view your pictures in slideshow mode.

Album List to display the album list.

Camera Mode to activate camera mode.

Assigned Media Folder

When you assign a picture, a copy will be saved in the

Assigned Media folder. The folder allows you to store copies of pictures on your phone and to assign pictures to various phone tasks.

To save a picture to the Assigned Media folder:

1.

From the In Phone folder (see “In Phone Folder” on page 98), select a picture you wish to save to the Assigned Media folder and press .

2.

Press Options (right softkey) > Set as.

3.

Select an option and press in preview screen. (A copy of the picture will automatically be saved to the Assigned

Media folder.)

To view pictures stored in the Assigned Media folder:

1.

Select

> Tools > Assign. Media

. (Thumbnails will be displayed, up to four at a time.)

2.

Use your navigation key to view and scroll through the pictures.

11. Camera 99

Sending Picture Messages

Once you have taken a picture, you can use the messaging capabilities of your phone to instantly share your picture with family and friends. You can send pictures to up to 25 people at a time using their email addresses or their phone numbers.

Sending Pictures From the In Phone Folder

1.

Select

> Pictures > My Albums > In Phone

.

2.

Highlight a picture you wish to send and press . (The check box in the lower right corner will be marked. You can select multiple pictures.)

3.

Press Options (right softkey) > Send Media. (You will see a message on the display.)

4.

Follow step 2 in “Sending a Text Message” on page 89.

5.

If you wish to include a text message, scroll to Text, and then enter your message.

6.

If you wish to include a voice message, scroll to Audio and press Record (right softkey) to record. (The maximum recording time is ten seconds.)

7.

To set the priority, scroll to Priority, and then select High,

Normal

, or Low.

8.

Confirm the recipients, message, voice message, and picture. (You may also select additional options by pressing the right softkey. Follow the onscreen instructions to add available options.)

9.

Press the appropriate softkey to send the pictures.

100 11. Camera

Sending Pictures From the Messaging Menu

You can also send picture messages from your phone’s

Messaging menu.

1.

Select

> Messaging > Send Message > Picture Msg

.

2.

Follow step 2 in “Sending a Text Message”on page 89.

3.

Select In Phone or Online Albums.

4.

Use the navigation key to select the picture you wish to send and press . (You can select multiple pictures.)

5.

Press Next (left softkey). To complete and send the picture message, follow steps 5-9 in “Sending Pictures From the In

Phone Folder” on page 100.

Tip: To take and send a new picture from Messaging, select Take Picture during step 3 above. Then take a new picture and follow step 5 above.

You can also send a picture message when the left softkey displays the

Send Msg option.

Note: This device does not support video files, however you can receive video messages. Copies of all photos and videos sent or received by your phone are automatically saved to Online Albums for 30 days. You can also send a video message from Online Albums, but to view a video in Online Albums you must be logged onto the website from a computer.

11. Camera 101

Managing Picture Messages

Each time you send pictures from your phone, copies are automatically uploaded into your Online Gallery if you have signed up for Photo Messaging service. You can manage the pictures saved in your Online Gallery. You can also manage your pictures from your phone.

Using the Xtra Online Gallery

To sign up for access to the Xtra Online Gallery:

©

From any PC with an Internet connection, go to http://xtra.co.nz/mobile

> Photo and Video Messaging Online

Gallery > Online Gallery > Open Gallery.

Managing Online Pictures From Your Phone

You can use your phone to manage, edit, or share pictures you have uploaded to the Xtra Online Gallery.

To access your online picture options from your phone:

1.

Select

> Pictures > My Albums > Online Albums

.

2.

Highlight an album title and press to display thumbnail images.

Tip: If only the Uploads folder exists, an album list is not displayed and thumbnail images in the Uploads folder are displayed.

To expand a selected picture from a thumbnail view, press Expand (left softkey).

3.

Use your navigation key to select a picture.

4.

Press Options (right softkey) to display your online picture options:

n n

Send Media to send your pictures.

Order Prints to order prints of the pictures. You can choose whether to pick up your prints at a retail store or have them mailed to you.

Note: The Order Prints service is currently not available.

102 11. Camera

n

Post to Service to access available services. Select

Update to display the latest services.

Note: The Post to Service service is currently not available.

n n n n n n n

Set as to assign the pictures.

Save to Phone to download the pictures to the In Phone folder.

Delete to delete pictures saved in the current album

(or Uploads folder).

Copy/Move to copy or move pictures to a selected album.

Details/Edit to edit your pictures or display details relating to your pictures.

Media Filter to filter only pictures or to display all media files.

Album List to display the album list.

Note: The online picture options may vary depending on the item you select.

To access your Online Albums options from your phone:

1.

Select

> Pictures > My Albums > Online Albums

.

2.

Use your navigation key to select an album (or Uploads folder).

3.

Press Options (right softkey) to display your online album options:

n

Edit/Delete to select an option from the following:

n

Delete Album to delete the selected album.

n n n

Rename Album to rename the selected album.

Album Info to display detailed information about the album.

Create Album to create a new album. Enter a new album name and press Save (left softkey).

Note: The Uploads folder cannot be deleted or renamed.

11. Camera 103

Uploading Pictures

1.

Select

> Pictures > My Albums > In Phone

.

2.

Check the picture(s) you wish to upload, and then press

Options

(right softkey) > Upload.

3.

Select Selected or All.

4.

Select “Uploads”Area or Other Albums.

Downloading Your Online Pictures

From the Xtra Online Gallery, you can download the selected pictures to your phone’s In Phone folder.

To download your online pictures to your phone:

1.

From the online pictures display, select the pictures you wish to download.

2.

Press Options (right softkey) > Save to Phone.

104 11. Camera

12. Bluetooth

®

Using Bluetooth

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets, hands-free car kits, Bluetoothenabled handhelds, computers, and mobile phones. The

Bluetooth communication range is usually up to approximately 10 meters (30 feet).

Note: You need to go back to the standby screen when receiving any objects via Bluetooth.

Turning Bluetooth On and Off

By default, your phone’s Bluetooth feature is turned off.

Turning Bluetooth on makes your phone “available” to other in-range Bluetooth devices. To make your phone visible to other devices, you must also set your phone’s visibility to other than Hidden. (See page 107.)

1.

Select

> Settings > Bluetooth > On/Off

.

2.

Select On to enable Bluetooth. Select Off to disable

Bluetooth.

Note: Enabling the Bluetooth settings affects the phone’s talk and standby times.

Bluetooth Status Indicators

The following icons show your Bluetooth connection status at a glance:

v

indicates the Bluetooth feature is enabled (blue icon).

v v v v

indicates your phone is connected to a Bluetooth device

(green icon).

indicates your phone is discoverable by another

Bluetooth device.

indicates your phone is communicating with a

Bluetooth device.

indicates a call is in progress using a Bluetooth device.

12. Bluetooth 105

Using the Bluetooth Menu

The Bluetooth menu allows you to use many functions of your phone’s Bluetooth service.

©

Select

> Tools > Bluetooth to display the Bluetooth menu:

n n n n n

Handsfree Pairing to find a Bluetooth headset or handsfree device and add it to your Trusted List.

Send Contact to send the Contacts entry saved on your phone to another Bluetooth device.

Send Biz Card to send your business card to another

Bluetooth device.

Add to Trusted to add a Bluetooth device to your Trusted

List. You can select a device type to be searched.

Trusted List to display a list of trusted Bluetooth devices.

Select <Add New> to find another Bluetooth device.

©

Select

> Tools > Bluetooth > More... > Block List to set Block

List. (See “Block List” below.)

Find Me

If you are going to use a Bluetooth profile to pair with a

Bluetooth device, you will need to allow the other device to initiate pairing with your phone.

1.

Select

> Tools > Bluetooth > Find Me

(left softkey).

2.

Follow the onscreen prompts to enter your passcode and press .

Block List

You can prevent other Bluetooth devices from connecting with your phone.

To add a device to the Block List:

1.

Select

> Tools > Bluetooth > More... > Block List

.

2.

Select <Add New>.

3.

Select Search or View Trusted:

n

Search to search for devices to be added to the Block List.

n

View Trusted to remove a device from the Trusted List and add it to the Block List.

106 12. Bluetooth

4.

Highlight a device you want to add to the Block List and press Block (left softkey).

Block List Options

From the Block List, press Options (right softkey) to display the following options:

n n

Device Info to display the device’s information.

Unblock to remove the device from the Block List.

n n n

Edit Name to edit the name of the device.

Sort by to sort the devices.

Help to display the Block List help.

Using the Bluetooth Settings Menu

The Bluetooth Settings menu allows you to set up many of the characteristics of your phone’s Bluetooth service, including:

v

Setting your phone’s visibility (or “discoverability”) for other

Bluetooth devices.

v v

Choosing a device for your Bluetooth calls.

Entering or changing the name your phone uses for

Bluetooth communication.

v

Displaying your phone’s Bluetooth device information.

1.

Select

> Settings > Bluetooth

.

2.

Select an option and press .

n

On/Off to enable or disable Bluetooth.

n

Visibility to select from Always Visible, Visible 3 min., or

Hidden to set your Bluetooth visibility.

n n n n

Device Name to set a Bluetooth name for your phone.

Device Info to display your phone’s Bluetooth name, address, class and available services.

Trusted List to display a list of trusted Bluetooth devices.

Voice Priority to choose the default device you want to use for incoming and outgoing calls.

12. Bluetooth 107

Bluetooth Profiles

All the Bluetooth settings you configure are stored in your phone’s Bluetooth user profile. Different profiles can be used for specific Bluetooth functions.

v

HSP: Headset Profile

– This profile functions as a mobile ear jack. When an incoming call is received, the ringer can be heard through the headset. While using your phone, you can use the headset instead of the phone by pushing a button on the headset, which has the same effect as inserting a jack into the phone. Increase or decrease the volume by using the volume key on the side of the phone.

Note: To cycle between the phone’s earpiece, speakerphone and a Bluetooth headset during a call, press .

v v v

HFP: Hands-Free Profile

– This profile functions as a mobile car kit. Incoming calls ring to the hands-free headset or device.

Calls can be received by pressing a button on the headset or device. For dialling, four functions are supported: recent call dial, voice dial, speed dial, and number dial. Increase or decrease the volume by using the volume key on the side of the phone.

OPP: Object Push Profile

– This profile uses the Generic Object

Exchange profile services to send data objects between devices and can be used to exchange Contacts and business cards (vCard).

PBAP: Phone Book Access Profile

– This profile enables exchange of Contacts information between devices. It is typically used between a car kit and a mobile phone to allow the car kit to display the name of the incoming caller.

Note: Above mentioned devices (such as headset) are optional and are not included with your phone.

108 12. Bluetooth

Pairing Bluetooth Devices

The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passcode (PIN Code) is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process.

1.

Select

> Tools > Bluetooth

.

2.

Select an option and press :

n n

Handsfree Pairing to find a headset or hands-free device.

Add to Trusted to find a device per device type. Select a device type to be searched.

n

Trusted List to find all device types. Select <Add New> to start searching.

3.

Select the device you wish to pair with and press .

4.

Enter the passcode and press . (When the owner of the other device enters the same passcode, the pairing is complete.)

5.

Edit the device name and press .

12. Bluetooth 109

Using the Trusted List Options

Once you have created paired devices, several options are available from the Trusted List.

1.

From the Trusted List, highlight a device.

2.

Press Options (right softkey) to display the following options:

n

Connect or Disconnect to connect to or disconnect from the Bluetooth device (if applicable).

n n

Send Item to send an item saved on your phone to another Bluetooth device (if applicable).

Edit Name to edit the name of the trusted device.

n n n

Auto-Accept to configure your phone’s accessibility to other Bluetooth devices. (See below.)

Device Info to display the trusted device’s information.

Sort by to sort the trusted devices.

n n n n

Delete to delete the selected device from the list.

Delete All to delete all devices from the list.

Settings to display the Bluetooth settings menu.

(See page 107.)

Help to display the Trusted List help.

Setting Automatic Pairing

You can configure your phone’s accessibility to other

Bluetooth devices.

1.

From the Trusted List, highlight a device and press Options

(right softkey) > Auto-Accept.

2.

Select a setting and press :

n n

On to allow the Bluetooth device to initiate a connection without any confirmation.

Off to display a confirmation screen from which you can accept or deny a connection.

110 12. Bluetooth

Sending Data via Bluetooth

You can send data saved on your phone to another Bluetooth device.

1.

From the Trusted List, highlight the device and then press

Options

(right softkey) > Send Item.

2.

Select an item (Business Card or Contacts) and press .

3.

Follow the onscreen instructions to select the item(s) to send.

4.

Make sure the other device is ready to receive data, and then press Send (left softkey).

5.

If necessary, enter the passcode and press .

Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible.

12. Bluetooth 111

13. Service Features

Using Voicemail

All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off.

New Voicemail Message Alerts

When you receive a new voice message, your phone alerts you and prompts you to call your voicemail by:

v v

Displaying a message on the screen.

Sounding the assigned ringer type.

v v

The LED blinking red.

Displaying at the top of your screen.

To call your voicemail:

©

Press .

To display your missed alerts:

©

Select

> Missed Alerts

.

Displaying Voicemail Details

©

Select

> Messaging > Voicemail > Details

.

Retrieving Your Voicemail Messages

©

Press and hold box.)

. (Your phone will dial your voicemail

112 13. Service Features

Clearing the Voicemail Icon

©

Select

> Messaging > Voicemail > Reset Indic. >

Yes

(left softkey).

Editing Your Voicemail Number

When you are roaming outside of the home network, you may need to change the number you dial to access your voicemail box.

To change the number:

1.

Select

> Messaging > Voicemail > Edit Voicemail#

.

2.

Edit your voicemail number and press .

To reset your voicemail number:

1.

Select

> Messaging > Voicemail > Edit Voicemail#

.

2.

Press Options (right softkey) > Reset Voicemail# > Yes (left softkey).

Responding to Call Waiting

When you are on a call, Call Waiting alerts you to incoming calls by sounding beeps. Your phone’s screen informs you that another call is coming in and displays the caller’s phone number (if available).

To respond to an incoming call while you are on a call:

©

Press . This puts the first caller on hold and answers the second call.

To switch back to the first caller:

©

Press again.

Note: Call Waiting is a network service. Please call subscribe.

Shift

to

13. Service Features 113

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls.

1.

Enter a number you wish to call and press or .

2.

Once you have established the connection, press to put the first caller on hold.

3.

Select Contacts, Recent History, or Enter Phone#.

4.

Choose a number from your Contacts or Recent History, or enter it directly, and press .

5.

When you are connected to the second party, press and then press again to begin your Three-Way Call.

,

Note: Three-Way Call is a network service. Please call

Shift

to subscribe.

Accessing Mobile Chatrooms

To access a chatroom from the browser:

©

Select

> Messaging > Chat

. (The browser will launch and take you to the Chat menu.)

114 13. Service Features

Web

With Web access on your phone, you will be able to browse full-colour graphic versions – not just text versions – of your favourite website, making it easier than ever to stay informed while on the go. Check sports scores, trade stocks, and shop all on your phone anywhere on the home network.

Launching the Web

©

Select

> Web

.

Net Guard

When Net Guard is enabled, a message will appear to confirm that you want to connect to the Web. This feature helps you avoid accidental connections. You can disable Net Guard in the future by selecting Always Auto-Connect when Net Guard is displayed.

©

Select

> Settings > More... > Internet > Net Guard and choose an option:

n n

On to enable Net Guard.

Off to disable Net Guard.

Note: When enabled, Net Guard appears only once as long as you have not turned the phone off and on.

Browsing the Web

Creating a Bookmark

Bookmarks allow you to store the address of your favourite websites for easy access at a later time.

1.

Launch the Web page you want to mark.

2.

Press the right softkey to go to the browser menu.

3.

Select Mark this page > Save (left softkey).

Note: Bookmarking a page does not store the page contents, just its address.

Some pages cannot be bookmarked. Whether a particular Web page may be marked is controlled by its creator.

13. Service Features 115

Accessing a Bookmark

1.

Launch the Web and press the right softkey to access the browser menu.

2.

Select View Bookmarks.

3.

Highlight the bookmark you wish to access and press OK

(left softkey) (or press the number corresponding to the bookmark you wish to access).

Editing a Bookmark

1.

Launch the Web and press the right softkey to access the browser menu.

2.

Select View Bookmarks.

3.

Highlight the bookmark you wish to edit and press the right softkey.

4.

Select Edit.

5.

Edit the address or title, and press OK (left softkey).

6.

Press Save (left softkey).

Deleting a Bookmark

1.

Launch the Web and press the right softkey to access the browser menu.

2.

Select View Bookmarks.

3.

Highlight the bookmark you wish to delete and press the right softkey.

4.

Select Delete. (A confirmation screen will be displayed.)

5.

Press Yes (right softkey).

Going to a Specific Website

1.

Launch the Web and press the right softkey to display the browser menu.

2.

Select Go to URL... > Input Address.

3.

Enter the URL of the website you wish to go to, and press

OK

(left softkey).

116 13. Service Features

Note: Not all websites are viewable on your phone.

Reloading a Web Page

1.

Launch the Web and press the right softkey to display the browser menu.

2.

Select Refresh this page. (The browser will reload the current

Web page.)

Restarting the Web Browser

If the Web browser seems to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser.

1.

Launch the Web and press the right softkey to display the browser menu.

2.

Select More... > Restart Browser.

Sending a Web Page

This feature allows you to send a URL (Web site address) you are viewing through text messaging.

1.

Launch the Web and press the right softkey to display the browser menu.

2.

Select Send Page.

3.

To complete and send a Web Page, follow steps 2-5 in

“Sending a Text Message” on page 89.

Adjusting the Browser Sound Volume

1.

Launch the Web and press the right softkey to display the browser menu.

2.

Select More... > Preferences > Sound Volume.

3.

Select your desired volume level by pressing the navigation key and press Done (left softkey).

13. Service Features 117

Email

Accessing Email Messages

1.

Select

> Messaging > Go to Email

. (The browser will launch and take you to the email menu.)

2.

Follow the system prompts to proceed.

Downloading From the Web Wirelessly

Your phone allows you to download images (screen savers), ringers, games, etc., from a website.

To download a file from the My Content menu:

1.

Select

> My Content > Options

(right softkey).

2.

Select Get New. (The browser will launch and display the

Downloads main screen.)

3.

Select your desired file and follow the system prompts.

Confirming the Downloaded Data

The downloaded data will automatically be classified as games, ringers, images (screen savers), or applications.

However, if any data has a different category, it will be classified as dynamic (the folder name is variable). If the data does not belong to any of the above, it will be classified as others.

To confirm the downloaded date:

1.

Select

> My Content

.

2.

Select your desired data folder (Games, Ringers, Screensavers, or Applications) and press .

Tip: The names of dynamic folders are variable depending on data.

You can manage your contents in the browser.

To confirm your content manager:

1.

Select

> My Content > Options

(right softkey).

2.

Select My Content Manager to launch the browser.

118 13. Service Features

Tip: You can also access your content manager from any folder in the My

Content menu. After selecting a folder, select My Content Manager to launch the browser.

Downloaded Data Options

Selecting Download Settings

This feature is available when you select a Java application.

1.

Select

> My Content

.

2.

Select Games or Applications.

3.

Highlight the data for which you want to select settings and press Options (right softkey).

4.

Select Settings.

5.

Select an option from the following and press :

(Not all options may be displayed depending on the selected data.)

n n

Net Access to select network access availability.

Push Registry to select availability to communicate with other mobile phones such as chat or match-up games

(if applicable).

n n n

Extensions to select display availability of file extensions.

Multimedia to select multimedia access availability.

Multimedia Cam to select multimedia camera access availability.

6.

Use your navigation key to select Always Allow, Ask, or

Never Allow

.

7.

Press to save the setting.

Assigning the Downloaded Data

1.

Select

> My Content

.

2.

Select Ringers or Screensavers.

3.

Highlight the data you want to assign and press Options

(right softkey).

13. Service Features 119

4.

Select Set as.

5.

Select the menu you want to assign and press .

Deleting the Downloaded Data

1.

Select

> My Content

.

2.

Select a folder and press .

3.

Highlight a file and press Options (right softkey).

4.

Select Delete.

5.

Select Yes to delete the data in the folder you select.

Tip: To delete all data in the folder, select Delete All during step 4 above.

Note: It takes a while when you delete a large amount of downloaded data.

Some data will remain if you answer an incoming call during the deleting process.

Selecting the Caller Tunes

Caller Tunes allow you to select ringback tones heard by the calling party.

1.

Select

> My content

.

2.

Select Caller Tunes. (The browser will launch and take you to the corresponding URL.)

120 13. Service Features

14. Warranty Information

Warranty

LIMITED WARRANTY

Kyocera Corporation (“Kyocera”) provides this Limited

Warranty for your mobile phone and original accessories delivered with your mobile phone (hereinafter referred to as

“Product”). Should your Product need warranty service, please return it to the dealer from whom it was purchased, or contact Telegistics Repair Limited.

OUR WARRANTY

Subject to the conditions of this Limited Warranty, Kyocera warrants this Product to be free from defects in design, material, and workmanship at the time of its original purchase by a consumer, and for a subsequent period of 12 months after purchase.

WHAT WE WILL DO

If, during the warranty period, this Product fails to operate under normal use and service due to defects in design, materials or workmanship, Kyocera authorised distributors

(Telecom NZ distribution channel in NZ) or Telegistics Repair

Limited will, at their option, either repair or replace the Product in accordance with the terms and conditions stipulated herein.

Kyocera and/or Telegistics Repair Limited reserve the right to charge a handling fee if a returned Product is found not to be under warranty according to the conditions below.

14. Warranty Information 121

CONDITIONS

1.

The warranty is valid only if the original proof of purchase issued to the original purchaser by the dealer, specifying the date of purchase and serial number*, is presented with the

Product to be repaired or replaced. Kyocera reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the

Product from the dealer.

2.

If Kyocera repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Kyocera.

3.

This warranty does not cover any failure of the Product due to liquid or impact damage, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with the Kyocera instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the Product due to accident, modification or adjustment, or acts of God.

4.

Since the mobile system on which the Product is to operate is provided by a carrier independent from Kyocera, Kyocera will not be responsible for the operation, availability, coverage, services, or range of that system.

5.

This warranty does not cover Product failures caused by installations, modifications, or repair or opening of the product performed by non Kyocera authorised personnel.

6.

The warranty does not cover Product failures which have been caused by use of accessories or other peripheral devices which are not SANYO branded original accessories intended for use with the Product.

7.

Tampering with any of the seals on the Product will void the warranty.

122 14. Warranty Information

8.

THERE ARE NO EXPRESS WARRANTIES, WHETHER

WRITTEN OR ORAL,OTHER THAN THIS PRINTED

LIMITED WARRANTY. ALL IMPLIED WARRANTIES

INCLUDING, AND WITHOUT LIMITATION, THE IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE, ARE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY. IN NO EVENT

SHALL KYOCERA OR ITS LICENSORS BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY

NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED

TO LOST PROFITS OR COMMERCIAL LOSS, TO THE

FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED

BY LAW.

Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you.

The warranty provided does not affect the consumer’s statutory rights under applicable legislation in force, nor the consumer’s rights against the dealer arising from their sales/ purchase contract.

*In some countries/regions additional information is requested. If so, this is clearly shown on the valid proof of purchase.

This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or registered trademarks of ACCESS CO., LTD. in Japan and other countries.

This software is based in part on the work of the Independent JPEG Group.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kyocera Corporation is under license. Other trademarks and trade names are those of their respective owners.

SANYO is a registered trademark of SANYO Electric Co., Ltd. and used under license.

14. Warranty Information 123

Index

A

Airplane Mode 43

Alarm Clock 76

Alert Notification 35

Animation 38

Answering Calls 17

Auto Answer 45

Automatic Speech Recognition

(ASR) 80

B

Background 37

Backlight 36

Battery 12

Bluetooth 105

Bookmarks 48, 115

Browser Settings 48

C

Calculator 79

Calendar 38, 70

Call Alarm 72

Call Answer 46

Call Memo 84

Call Waiting 113

Callback Number 42

Camera 92

Chat 114

Contacts 60

Contacts Match 24, 46

Contrast 38

Countdown Timer 77

D

Dialling Options 16

Display Screen Icons 9

Display Settings 36

E

Email 118

Emergency Numbers 19

Entering Text 25

F

Font Size 37

H

Headset Mode 46

History 56

I

Icon Definition 49

Idle Mode 39

In-Call Options 20

Internet 55, 115

K

Keytones 34

L

Location Settings 40

Lock Code 50, 51

Lock Mode 51

Locking Your Phone 50

Lost or Stolen Phones 54

M

Making Calls 16

Menu Diagram 30

Menu Style 36

Message Notification Display 41

Messaging 41, 88

Missed Call Notification 18

My Content 118

My Favourites 45

N

Net Guard 115

124 Index

P

Picture Message 88, 91, 100

Phone (illus.) 6

Phone Number

Dialling With Pauses 22

Displaying 15

Finding 22

Saving 21, 58

Plus Code Dialling 23

Power Save Mode 36

Preset Messages 29, 41

R

Recording Mode 85

Resetting Phone Content 54

Restricting Calls 52

Ringer Types 32

S

Safety 2

Screen Call 86

Screen Saver 38

Security Menu 50

Side Key Guard 47

Signature 42

Silence All 35

Sleep Mode 39

Sound Settings 32

Special Numbers 52

Speed Dialling 24, 63, 66

Stopwatch 78

T

T9 Text Input 26

Text Message 88, 91

Three-Way Call 114

To Do List 73

TTY 44

Turning Your Phone On and Off

11

U

Unlocking Your Phone 50

V

Vibrate Type 34

Voice Guide 35

Voice Memo 84

Voicemail 112

Volume Settings 33

W

Warranty 121

Web 115

World Clock 78

X

Xtra Online Gallery 102

Index 125

Notes

Notes

Notes

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents