Onkyo DV-S501 User Guide Manual

Onkyo DV-S501 User Guide Manual
Introduction
NTSC
Connections
DV-S501
DVD Player
Basic Playback
Instruction Manual
CINEMA SCAN
POWER
ENTER
RETURN
STAND-BY
OPEN /CLOSE
PHONES LEVEL
TITLE
PAUSE
STOP
PLAY
DIMMER
MAX
DVD PLAYER
Others
THIS DVD PLAYER IS MANUFACTURED FOR PLAYBACK
OF REGION 1 (USA, CANADA) ENCODED DVD
SOFTWARE. USE OF SOFTWARE NOT INTENDED FOR
REGION 1 PLAYBACK MAY RESULT IN UNDESIRABLE
PLAYER PERFORMANCE.
DV-S501
Advanced Playback
MIN
MENU
Function Setup
PHONES
Downloaded from www.Manualslib.com manuals search engine
Safety Precautions
Thank you for your purchase of the Onkyo DVD player.
Please read this manual thoroughly before making connections and turning on the power.
Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from
your new DVD player.
Please retain this manual for future reference.
“WARNING”
“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.”
CAUTION:
“TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.”
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
FOR CANADIAN MODEL:
POUR LE MODELE CANADIEN:
For models having a power cord with a polarized plug.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
• THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM DIGITAL
APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF
COMMUNICATIONS.
Sur les modèles dont la fiche est polarisée.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
• L’INTERFERENCE, RADIO ELECTRIQUE GENEREE PAR CET APPAREIL NUMERIQUE DE TYPE B NE DEPASSE PAS LES LIMITE
ENONCEES DANS LE REGLEMENT SUL LES PERTURBATIONS RADIO ELECTRIQUES, SECTION APPAREIL NUMERIQUE, DU
MINISTERE DES COMMUNICATIONS.
2
Downloaded from www.Manualslib.com manuals search engine
DANGER:
Introduction
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT
EXPOSURE TO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
FOR U.S.A. MODEL:
1.This laser is covered by a housing which prevents exposure during operation or maintenance. However, this product
is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the
Food and Drug Administration. According to their regulations 21 CFR section 1002.30, all manufactures who sell
Laser Products must maintain records of written communications between the manufacturer, dealers and customers
concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this
product, please feel free to write to the address on the back page of this manual. When you write us, please include
the model number and serial number of your DVD player.
2.In compliance with Federal Regulations, the certification, identification and the period of manufacture are indicated
on the real panel.
3.FCC INFORMATION FOR USER
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, it not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications made to this equipment, not expressly approved by Onkyo, or parties authorized by
Onkyo, could void the user’s warrantee of the equipment.
“CLASS 1 LASER
PRODUCT ”
This label on the rear panel of the unit states that:
1.This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet.
2.To prevent the laser from being exposed, do not remove the cover. Refer servicing to
qualified personnel.
FOR CANADIAN MODEL:
(POUR LE MODELE CANADIEN)
• THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM
DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN
DEPARTMENT OF COMMUNICATIONS.
• L'INTERFERENCE, RADIO ELECTRIQUE GENEREE PAR CET APPAREIL NUMERIQUE DE TYPE B NE
DEPASSE PAS LES LIMITES ENONCEES DANS LE REGLEMENT SUL LES PERTURBATIONS RADIO
ELECTRIQUES, SECTION APPAREIL NUMERIQUE, DU MINISTERE DES COMMUNICATIONS.
Downloaded from www.Manualslib.com manuals search engine
3
Important Safeguards
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions – The safety and operating
instructions should be retained for future reference.
12. Power- Cord Protection – Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them,
especially wear plugs, convenience receptacles, and
the point where they exit from the appliance.
3. Heed Warnings – All warnings on the appliance and in
the operating instructions should be adhered to.
13. Cleaning – The appliance should be cleaned only as
recommended by the manufacturer.
4. Follow Instructions – All operating and use
instructions should be followed.
14. Nonuse Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
5. Water and Moisture – The appliance should not be
used near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
6. Carts and Stands – The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
PORTABLE CART WARNING
6A. An appliance and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces
may cause the appliance and cart combination to overturn.
S3125A
7. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
8. Ventilation – The appliance should be situated so that
its location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or if placed in a built-in
installation, such as a book case or cabinet that may
impede the flow of air through the ventilation openings,
there should be free space of at least 5 cm (2 in.) and
open up behind the appliance.
9. Heat – The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce
heat.
10. Power Sources – The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.
11. Polarization – If the appliance is provided with a
polarized plug having one blade wider than the other,
please read the following information: The polarization
of the plug is a safety feature. The polarized plug will
only fit the outlet one way. If the plug does not fit fully
into the outlet, try reversing it. If there is still trouble, the
user should seek the services of a qualified electrician.
Under no circumstances should the user attempt to
defeat the polarization of the plug.
4
Downloaded from www.Manualslib.com manuals search engine
15. Object and Liquid Entry – Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
16. Damage Requiring Service – The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
17. Servicing – The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
Precautions
When shipping the DVD player, the original shipping carton
and packing materials come in handy. For maximum
protection, repack the unit as it was originally packed at the
factory.
Do not use volatile liquids, such as insect spray, near the
DVD player. Do not leave rubber or plastic products in
contact with the DVD player for a long time. They will leave
marks on the finish.
The top and rear panels of the DVD player may become
warm after a long period of use. This is not a malfunction.
When the DVD player is not in use, be sure to remove the
disc and turn off the power.
If you do not use the DVD player for a long period, the unit
may not function properly in the future. Turn on and use the
DVD player occasionally.
Notes on Moisture Condensation
Moisture condensation damages the DVD player.
Please read the following carefully.
Introduction
Notes on Handling
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form on
the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside this unit, one of
the most crucial internal parts of the DVD player.
Examples of moisture
condensation
Moisture condensation occurs during the
following cases.
Notes on Placement
When you place this DVD player near a TV, radio, or VCR,
the playback picture may become poor and the sound may
be distorted. In this case, place the DVD player away from
the TV, radio, or VCR.
Notes on Cleaning
When you bring the DVD player directly from a cold place
to a warm place.
When you use the DVD player in a room where you just
turned on the heater, or a place where the cold wind from
the air conditioner directly hits the unit.
In summer, when you use the DVD player in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD player in a humid place.
Use a soft, dry cloth for cleaning.
For stubborn dirt, soak the cloth in a weak detergent
solution, wring well and wipe. Use a dry cloth to wipe it dry.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the DVD
player.
If you use a chemical saturated cloth to clean the unit,
follow that product’s instructions.
To Obtain a Clear Picture
The DVD player is a high technology, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn
down, the picture quality becomes poor. To obtain a clear
picture, we recommend regular inspection and maintenance
(cleaning or parts replacement) every 1,000 hours of use
depending on the operating environment. For details, contact
your nearest dealer.
Downloaded from www.Manualslib.com manuals search engine
Do not use the DVD player when moisture
condensation may occur.
If you use the DVD player in such a situation, it may
damage discs and internal parts. Remove the disc, connect
the power cord of the DVD player to the wall outlet, turn on
the DVD player, and leave it for two or three hours. After
two or three hours, the DVD player will have warmed up
and evaporated any moisture. Keep the DVD player
connected to the wall outlet and moisture condensation will
seldom occur.
5
Features
Audiophile-class DVD/CD player
Component Video Outputs (Gold-Plated)
Dolby Digital Audio Output
10-Bit Video D/A conversion
Optical & Coaxial digital audio output
Complete front-panel control
4-power picture zoom
Brushed aluminum front panel
6
Downloaded from www.Manualslib.com manuals search engine
Table of Contents
Safety Precautions ................................. 2-3
Important Safeguards ............................... 4
Precautions ............................................... 5
Features .................................................... 6
Introduction
Introduction
Identification of Controls ...................... 8-11
Front Panel/Rear Panel/DVD display
Remote Control
Preparing the Remote Control
Operating with the Remote Control
Connecting to a TV ................................. 12
Connecting to an Audio System or
TV with COMPONENT VIDEO Inputs ..... 13
Connections
Connections
Connecting to Optional Equipment ... 14, 15
Enjoying Dolby Digital Sound
Enjoying Dolby Pro Logic Surround Sound
Enjoying 2 Channel Digital Stereo Sound
Playing Back a Disc ........................... 16-19
Basic Playback
Playing at ×2, ×8 or ×30 the Normal Speed
Playing Frame by Frame
Playing in Slow-Motion
Resuming Playback from the Same Location
Basic Playback
Basic Playback
Locating a Specific Title, Chapter,
or Track ............................................. 20, 21
Locating a Title Using the Title Menu
Locating a Title
Locating a Specific Chapter or Track Directly
Locating a Specific Chapter or Track
Locating a Specific Location Within a Title
Advanced Playback
Repeating a Title, Chapter, or Track
Repeating a Specific Segment
Playing in a Favorite Order ..................... 23
Setting Titles, Chapters, or Tracks in a Favorite Order
Playing in Random Order ............................... 24
Playing Titles in Random Order
Playing Chapters or Tracks in Random Order
Zooming a Picture .......................................... 25
Zooming a Picture
Selecting the Camera Angle ................... 26
Advanced Playback
Playing Repeatedly ................................. 22
Changing the Camera Angle
Selecting a Language ............................. 27
Selecting a Playback Audio Setting
Selecting Subtitles .................................. 28
Displaying Subtitles
Selecting a Subtitle Language
Using the On-Screen Display ................. 29
Checking the Operational Status
Checking the Remaining Time and Setting Status
Customizing the Function Settings .... 30-36
Displaying the SET UP MENU Screen
Setting the Audio Sound
Setting the Functions
Setting the Displays
Function Setup
Function Setup
Table of Languages ................................ 39
Table of Languages and Their Abbreviations
Setting the Parental Lock .................. 37, 38
Setting the Parental Lock
Others
On Handling Discs
On Cleaning Discs
On Storing Discs
About This Instruction Manual
Playable Discs
Notes on Region Numbers
Notes on Copyright
Downloaded from www.Manualslib.com manuals search engine
Before Calling Service Personnel ........... 41
Others
Notes on Discs ........................................ 40
Symptoms and Correction
Specifications .......................................... 42
DVD Player/Outputs/Supplied Accessories
7
Identification of Controls
See the page in
for details.
Front Panel/Rear Panel/DVD Display
■ Front Panel
Shuttle ring 17
ENTER button 17 , 30 - 38
Jog dial 17
POWER indicator 16
RETURN button 32
36
DVD display 9
POWER button 16
, 34 ,
, 38
Direction buttons
( y/u,a/s )
CINEMA SCAN
POWER
17 , 30 - 37
ENTER
RETURN
STAND-BY
indicator
STAND-BY
OPEN /CLOSE
PHONES
PHONES LEVEL
TITLE
16
MIN
PAUSE
STOP
PLAY
DIMMER
MENU
MAX
DVD PLAYER
DV-S501
PLAY button 16
DIMMER button 9
MENU button 10
PHONES jack
12
STOP button 17
Disc tray 16
PAUSE button 17
TITLE button 20
Up/Down buttons 21
PHONES LEVEL knob 12
OPEN/CLOSE button 16
■ Rear Panel
Power cord
ANALOG
OUTPUT
VIDEO OUT
L
PCM/AC-3
DIGITAL
REMOTE
CONTROL
COAXIAL OPTICAL
R
Y
Cb
Cr
S
VIDEO
Power plug 12
COMPONENT VIDEO OUT jacks
Y•Cb•Cr 13
S VIDEO OUT jack 12
VIDEO OUT jack 12 , 14 , 15
z REMOTE CONTROL jacks 8
PCM/AC-3 DIGITAL OPTICAL AUDIO OUT terminal 14 , 15
PCM/AC-3 DIGITAL COAXIAL AUDIO OUT jack 14 , 15
ANALOG AUDIO OUT (L/R) jacks 12 , 13
, 15
Connections for remote control ( z )
When connecting ONKYO products, it is necessary to attach the z cable to be able to use the remote control of the main component to control the entire system.
1.To use this DVD player with an amplifier (or receiver), cassette tape deck and tuner with the z symbol, insert the remote control
cable plugs into the REMOTE CONTROL jacks.
2.As the exact connection sequence of the z cable is unimportant, you can connect from the amplifier (or receiver) to either the tuner,
the cassette tape deck or to the compact disc player.
3.If using an z equipped ONKYO amplifier (or receiver), to operate correctly, the remote control must face towards the remote control
sensor of the amplifier (or receiver).
Notes:
• The upper and lower z remote control jacks have the same function.
• Remote control operation is not possible when only the remote control cable is connected — the audio connection cables must also be connected.
• An z remote control cable equipped with a 1/8" (3.5mm) diameter miniature two-conductor phone plug is included with the DV-S501
and with every tuner, compact disc player or cassette tape deck with the z symbol.
8
Downloaded from www.Manualslib.com manuals search engine
Introduction
■ DVD Display
• Pressing of the DIMMER button changes
the brightness of the Display.
Dimmed
Off
Connections
Normal
Repeat playback mode indicators 22
RANDOM indicator 24
Title number indicator
Operating status indicator
MEMORY indicator 23
RANDOM
MEMORY
VCD
TITLE
CHP/TR
TOTAL
REMAIN
REPEAT
A - B ALL
DVD
Audio CD indicator
COMPONENT
indicator 33
DVD indicator
Angle icon indicator 36
Chapter/track number indicator
Total playing time/remaining time/elapsed time indicators 24
■ The indicators vary depending on the kinds of discs you play.
■ DVD Video disc
■ Audio CD
• When closing the disc tray:
• When closing the disc tray:
Example
Example
RANDOM
MEMORY
VCD
TITLE
CHP/TR
TOTAL
REMAIN
RANDOM
MEMORY
VCD
PBC
REPEAT
A - B ALL
TITLE
DVD
Total number of
tracks
• During playback:
REMAIN
PBC
Total playing time of
the disc
• During playback:
Example
TITLE
TOTAL
REPEAT
A - B ALL
Total number of titles
RANDOM
MEMORY
VCD
CHP/TR
DVD
CHP/TR
REMAIN
Example
PBC
REPEAT
A - B ALL
RANDOM
MEMORY
VCD
DVD
TITLE
CHP/TR
REMAIN
PBC
REPEAT
A - B ALL
DVD
Elapsed time of
the current title
Playing chapter 3
in title 2
Playing track 6
Some DVD video discs may not display the chapter numbers
or elapsed time.
Elaplsed time of
the current track
■ Other indicators
When playing back the
REPEAT
same title, chapter or track
repeatedly.
22
When playing back a specific
REPEAT
A-B
segment repeatedly. (A-B
repeat)
When playback is paused.
22
16
MEMORY During memory playback.
23
When “COMPONENT
RANDOM During random playback.
VIDEO OUT.” is set via the
on-screen display.
When playing back the
REPEAT
ALL
entire disc repeatedly.
22
When the camera angle can
be changed. 26
24
33
Downloaded from www.Manualslib.com manuals search engine
9
Identification of Controls (continued)
The instructions in this manual describe the controls on the remote control. See the page in
for details.
Remote Control
SET UP button 30
DISPLAY button 29
POWER button 16
OPEN/CLOSE button 16
AUDIO button 27
POWER
SET UP
DISPLAY
OPEN /
CLOSE
AUDIO
ANGLE
SUBTITLE
SUBTITLE
ON / OFF
ANGLE button 26
MENU
Direction buttons
SUBTITLE ON/OFF button 28
SUBTITLE button 28
MENU button* 20
17 , 30 - 37
TITLE
ENTER
TITLE button 20
ENTER button 17 , 30 - 37
ZOOM
RETURN
ZOOM button 25
RETURN button 32
LAST PLAY
1
2
LAST PLAY button 19
3
CLEAR
4
5
6
7
8
9
CLEAR button 22
Number buttons 20
SEARCH button 20
FR (fast reverse) button 18
PLAY button 16
PS / LB
PS/LB button 35
SEARCH
DIMMER
DIMMER button 9
+10
0
FR
PLAY
FF
PAUSE / STEP
DOWN
STOP
UP
S LOW
REPEAT
A-B
MEMORY
RANDOM
DOWN button 21
STOP button 17
PAUSE/STEP button 17
FF (fast forward) button 18
SLOW button 19
UP button 21
REPEAT button 22
RANDOM button 24
A-B button 22
MEMORY button 23
REMOTE CONTROLLER RC-375 DV
∗ MENU button
Use the MENU button to display
the menu screen included on
DVD video discs. To operate a
menu screen, follow the
instructions in “Locating a Title
Using the Title Menu” 20 .
10
Downloaded from www.Manualslib.com manuals search engine
1
Open the cover.
This section shows you how to use the remote control.
Point the remote control at the
remote sensor and press the
buttons.
30°
Introduction
Insert the batteries into the remote control so you can use it to
operate the DVD player.
Operating with the Remote Control
Connections
Preparing the Remote Control
30°
Within about 5 m (16-11/16")
2
Insert batteries (AA size).
Make sure to match the + and – on the
batteries to the marks inside the battery
compartment.
3
Close the cover.
Distance: About 5 m(16-11/16") from the
front of the remote sensor
Angle:
About 30° in each direction of
the front of the remote sensor
* Do not expose the remote sensor of the
DVD player to a strong light source such
as direct sunlight or illumination. If you
do so, you may not be able to operate
the DVD player with the remote control.
Notes on the remote control:
Notes on batteries:
• Direct the remote control at the remote sensor of the DVD player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or humid
place.
• Do not spill water or put anything wet on the remote control.
• Do not open the remote control.
Improper use of batteries may cause battery leakage and corrosion.
To operate the remote control correctly, follow the instructions below.
• Do not insert the batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do not
throw the batteries into a fire.
• Do not leave dead or exhausted batteries in the remote control.
• Do not use different types of batteries together, or mix old and new
batteries.
• If you do not use the remote control for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote control does not function correctly or if the operating
range becomes reduced, replace all batteries with new ones.
• If battery leakage occurs, wipe the battery liquid from the battery
compartment, then insert new batteries.
• The batteries should last about one year with normal use.
Downloaded from www.Manualslib.com manuals search engine
11
Connecting to a TV
Connect the DVD player to your TV.
Connecting to a TV
■ Setting of the output sound type
From the on-screen displays, set the “AUDIO OUT SEL.” to “PCM”. 31 , 32
■ Setting of the video output type
From the on-screen displays, set the “VIDEO OUT SEL.” to “S” when using the S VIDEO OUT jack. 31 , 33
The Composite Video (yellow) output of the DVDplayer is always operational regardless of output mode selected
(“C” or “S”) via the on-screen display.
To wall outlet
Power plug
ANALOG
OUTPUT
VIDEO OUT
PCM/AC-3
DIGITAL
REMOTE
CONTROL
The shape of
the power plug
may differ
according to
the model and
the area where
the unit is
purchased.
COAXIAL OPTICAL
L
R
Y
Cb
Cr
S
To S VIDEO OUT
VIDEO
(yellow) (white)
To
VIDEO
OUT
Audio/video cable (supplied)
To audio inputs
(red)
(white)
To video input
(yellow)
Signal flow
To ANALOG AUDIO OUT
(red)
S video cable (supplied)
To S video input
If the TV has an S video input, connect the
DVD player with the supplied S video cable.
TV or monitor with
audio video inputs
Notes:
• Refer to the instruction manual of the connected TV and how to activate TV input as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to your TV.
• Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the
playback picture will be distorted because DVD discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel using a
stereo plug.
Before connecting, temporarily turn down the volume with the PHONES
LEVEL knob. Readjust to your preference when playback begins.
POWER
PHONES LEVEL
STAND-BY
PHONES
PHONES LEVEL
TITLE
MIN
MENU
DIMMER
MAX
MIN
12
Downloaded from www.Manualslib.com manuals search engine
MAX
Connecting to an Audio System or TV with
COMPONENT VIDEO Inputs
■ Setting of the output sound type
From the on-screen displays, set the “AUDIO OUT SEL.” to “PCM”. 31 , 32
■ Setting of the video output type
From the on-screen displays, set the “VIDEO OUT SEL.” to “C” when using the COMPONENT VIDEO OUT jacks
(Y, Cb, Cr). 31 , 33
To wall outlet
Connections
Connecting to an Audio System or TV with COMPONENT VIDEO Inputs
Introduction
You can listen to the sound of audio CDs and DVD video discs in stereo and enjoy the enhanced picture quality of
DVD video discs on a TV with COMPONENT VIDEO inputs.
Power plug
ANALOG
OUTPUT
VIDEO OUT
L
PCM/AC-3
DIGITAL
REMOTE
CONTROL
The shape of the
power plug may
differ according
to the model and
the area where
the unit is
purchased.
COAXIAL OPTICAL
R
Y
To Y
VIDEO
OUT
Cb
Cr
To Cb
VIDEO
OUT
S
VIDEO
To Cr
VIDEO
OUT
To ANALOG AUDIO OUT
(white) (red)
Signal flow
To audio inputs
of the amplifier
(red)
(white)
Audio system
To Cr video input
To Cb video input
To Y video input
TV or monitor with
component signal inputs
COMPONENT VIDEO OUT (COLOR DIFFERENCE):
Some TVs or monitors are equipped with color difference inputs. Connecting to these inputs allows you to enjoy higher quality picture
playback.
Actual labels for color difference inputs may vary depending on the TV manufacturer. (ex. Y, B-Y, R-Y etc.)
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust
the TV or monitor for the optimum performance.
Notes:
• Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall
outlet before making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player
away from the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level.
Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers
may be damaged.
Downloaded from www.Manualslib.com manuals search engine
13
Connecting to Optional Equipment
You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo.
Enjoying Dolby Digital Sound
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this
realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby
Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby
Digital soundtracks, as well as from titles with the Dolby Surround mark.
■ Setting of the output
sound type
• From the on-screen
displays, set the “AUDIO
OUT SEL.” to “AC-3”.
31 , 32
• Select the sound recording
system of the disc to “AC3” on the audio setting
indication. 27
ANALOG
OUTPUT
VIDEO OUT
L
PCM/AC-3
DIGITAL
R
Y
Video cable
Signal flow
Cb
Cr
S
VIDEO
To
VIDEO
OUT
To PCM/AC-3
DIGITAL AUDIO OUT
coaxial cable (COAXIAL or OPTICAL)
To COAXIAL type
digital audio input
Optical digtal cable
To video input
To OPTICAL type digital audio input
Connection
example
Connect either.
Amplifier equipped with a
Dolby Digital decoder
Front speaker
(left)
Standard equipment to
enjoy Dolby Digital
• The DVD player (equipped
with an AC-3 output jack)
• DVD video discs recorded
in Dolby Digital
• 6 channel amplifier
equipped with a Dolby
Digital decoder, or Dolby
Digital processor and
power amplifier
• 5 speakers and 1 sub
woofer
REMOTE
CONTROL
COAXIAL OPTICAL
Front speaker
(right)
TV
Center
speaker
Sub woofer
Rear speaker
(left surround)
Rear speaker
(right surround)
Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby,” “AC-3,” “Pro
Logic,” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Notes:
• DO NOT connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the PCM/AC-3 DIGITAL AUDIO OUT jack of the
DVD player.
• Connect the PCM/AC-3 DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL” or “COAXIAL” input of a Dolby Digital Receiver
or Processor.
• Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be
damaged.
When connecting the optical digital cable, remove the cap and
fit the connector into the jack firmly. When not using the jack,
keep it capped to protect it from dust intrusion.
14
Downloaded from www.Manualslib.com manuals search engine
Warning
Enjoying Dolby Pro Logic Surround Sound
Enjoying 2 Channel Digital Stereo Sound
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic
Surround by connecting an amplifier and speaker system (right and
left front speakers, a center speaker, and one or two rear speakers).
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo
by connecting an amplifier equipped with a digital audio input
and speaker system (right and left front speakers).
■
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in
“Enjoying Dolby Digital Sound”. 14
Refer to that amplifier’s instruction manual and set the
amplifier so you can enjoy Dolby Pro Logic Surround sound.
Connections
■
Introduction
32 unless you are connecting (via the PCM/AC-3 DIGITAL AUDIO OUT
Do not set the "AUDIO OUT SEL." to “AC-3” on the setting screen 31
jack) an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as wall as the speaker.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
ANALOG
OUTPUT
VIDEO OUT
L
PCM/AC-3
DIGITAL
REMOTE
CONTROL
COAXIAL OPTICAL
R
Y
ANALOG
OUTPUT
VIDEO OUT
PCM/AC-3
DIGITAL
REMOTE
CONTROL
COAXIAL OPTICAL
L
Signal flow
R
Y
Signal flow
Cb
S
Cr
To ANALOG
AUDIO OUT
(red)
(white)
Video cable
VIDEO
To PCM/AC-3
DIGITAL AUDIO
OUT
To VIDEO
OUT
(white)
Video
cable
coaxial
cable
Connection
example
To COAXIAL type
digital audio input
Optical
digital
cable
To OPTICAL type
digital audio input
Connect either.
Audio cable
(red)
Amplifier
equipped with a
digital audio input
To audio input
To video
input
Amplifier equipped with
Dolby Pro Logic Surround
Front
speaker
(left)
Center speaker
Rear speaker
Front
speaker
(right)
Front
speaker
(left)
To video input
TV
Front
speaker
(right)
TV
Connect one or two
rear speakers.
The output sound from
the rear speakers will
be monaural even if
you connect two rear
speakers.
■ Set “AUDIO OUT SEL.” to “PCM” via the on-screen
displays. 31 , 32
PCM :
S
Cr
VIDEO
To VIDEO
OUT
Connection
example
Cb
■ Set “AUDIO OUT SEL.” to “PCM” via the on-screen
displays. 31 , 32
PCM :
Pulse Code Modulation
2ch for Analog or Digital prefer connections for
best 2ch or Dolby Surround Sound.
Pulse Code Modulation
2ch for Analog or Digital prefer connections for
best 2ch or Dolby Surround Sound.
Notes:
• Refer to the instruction manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any
connections.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
Downloaded from www.Manualslib.com manuals search engine
15
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
It may cause serious personal injury.
Playing Back a Disc
POWER
indicator
1
DVD display
CINEMA SCAN
POWER
ENTER
RETURN
STAND-BY
OPEN /CLOSE
PHONES
PHONES LEVEL
TITLE
MIN
PAUSE
STOP
PLAY
DIMMER
MENU
MAX
DVD PLAYER
This section shows you the basics on how to play
STAND-BY indicator
back a DVD video disc or audio CD.
3
2
DV-S501
4
STOP
PAUSE
Up/Down
Basic Playback
Preparations
• When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD player.
• When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the
input source connected to the DVD player.
• For connection details, see "Connections". 12 – 15
• Set the playback picture size according to the aspect ratio of the connected TV via the on-screen displays. 30 , 35
• If you do not have the necessary equipment to enjoy Dolby Digital sound, set the AUDIO OUT SEL. to “PCM" via the on-screen
displays. 31 , 32
1
POWER
Connecting the power supply.
1. Plugging the power cord into an AC wall outlet.
The STAND-BY indicator on the player illuminates.
2. Press the POWER button. The DVD player turns on and
the POWER indicator on the player illuminates.
2
OPEN /
CLOSE
Note:
Press OPEN/CLOSE.
You can open the disc tray by pressing this
button even if the DVD player is turned off.
The disc tray opens.
3
Place the disc on the disc
tray.
Notes:
CINEMA
SCAN
ENTER
RETURN
STOP
PAUSE
OPEN
/CLOSE
ER
DVD PLAY
With the playback side down
4
PLAY
Press PLAY.
The disc tray closes and playback starts.
If you insert a DVD video disc that contains a title menu,
the menu screen appears.
See “To start playback from the menu screen” 17 .
• There are two different disc sizes. Place the
disc in the correct guide on the disc tray. If
the disc is out of the guide, it may damage
the disc and cause the DVD player to
malfunction.
• Do not place anything except DVD video
discs or audio CDs on the disc tray.
Note:
You may need to press the TITLE or MENU
button to display the menu screen depending
on the DVD video discs.
Notes:
• Do not move the DVD player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push the disc tray
while it is moving. Doing so may cause the DVD player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD player to
malfunction.
16
Downloaded from www.Manualslib.com manuals search engine
1
2
/
/
MENU
TITLE
1
2
3
4
5
6
7
8
9
+10
0
/
ENTER
4
To obtain a higher quality picture
Occasionally, some picture noise not usually displayed with a
normal broadcast may appear on the TV screen while playing
back a DVD video disc because the high resolution pictures on
these discs include a lot of information. While the amount of noise
depends on the TV you use with this DVD player, you should
generally reduce the sharpness adjustment on your TV when
viewing DVD video discs.
PAUSE/STEP
STOP
REMOTE CONTROLLER
About DVD CD
The DVD CD icons on the heading bar show the playable discs for
the function described under that heading.
DVD
: You can use this function with DVD video discs
CD
: You can use this function with audio CDs
DVD
To stop playback
To start playback from the menu screen
1 Press /
/ /
or the number
buttons to select the title you want.
e.g.
TITLE 1
TITLE 2
TITLE 3
TITLE 4
STOP
Press STOP.
The DVD player returns to chapter 1 or
track 1.
Basic Playback
ENTER
CD
To remove the disc
Press OPEN/CLOSE.
OPEN /
CLOSE
ENTER
2 Press ENTER.
The DVD player starts playback from
the selected title.
CINEMA
SCAN
ENTER
RETURN
STO
PAUSE
OPEN
/CLOSE
DVD PLA
To pause playback (still mode)
PAUSE / STEP
Press PAUSE/STEP during
playback.
Remove the disc after the disc tray
opens completely.
To resume normal playback, press the
PLAY button.
• The sound is muted during still mode.
• Be sure to press the OPEN/CLOSE
button to close the disc tray after you
remove the disc.
To change the playback speed using CINEMA SCAN
You can view pictures at a variety of speeds by turning the inner jog dial or the outer shuttle ring.
■ Jog dial
Turn during still playback.
Forward: To advance the picture
frame by frame.
Reverse: To reverse the picture
frame by frame.
• The reverse frame playback may advance more
rapidly than in forward
• The jog dial does not function during audio CD
playback.
■ Shuttle ring
Slow
Fast
Reverse
Slow
Fast
Forward
Turn during normal playback or still
playback.
The playback speed can be controlled
by the extent of the wheel rotation.
• The playback speed may differ depending on the discs.
• If you slow down the playback speed of DVD video disc by
turning the ring leftward, the DVD player performs reverse
frame playback. The reverse frame playback may advance
more rapidly than in forward.
• You cannot slow down the playback speed of audio CDs.
Note:
In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may
damage your television set permanently etching that image onto its screen. To avoid this, be sure to press the STOP button on your
remote control once the movie is completed.
Downloaded from www.Manualslib.com manuals search engine
17
Playing Back a Disc (continued)
2
8
30
3
1
2
4
5
6
7
8
9
+10
0
PLAY
PAUSE/STEP
Frame
by Frame
SlowMotion
Last
Play
FF
FR
REMOTE CONTROLLER
You can play back discs at various speeds, and resume playback from the
location where you stopped playback.
DVD
DVD
CD
Playing at ×2, ×8 or ×30 the Normal Speed
You can play back a disc at ×2, ×8 or ×30 the normal speed.
Playing Frame by Frame
You can advance a DVD video disc frame by frame.
Press FR or FF during playback.
PAUSE / STEP
FR
FF
• DVD video disc
The playback speed becomes x2 the
normal speed.
Each time you press the FR or FF button,
the playback speed changes.
FR:
FF:
Press PAUSE/STEP during still
playback.
Each time you press the PAUSE/STEP
button, the picture advances one frame.
Fast reverse playback
Fast forward playback
TV screen
×2
×2 the
normal speed
×8
× 30
×8 the
normal speed
×30 the
normal speed
• Audio CD
The fast reverse or fast forward playback
alternates between two speeds.
TV screen
FR
FF
FR1
FR2
Fast reverse
playback
FF1
FF2
Fast forward
playback
To resume normal playback
PLAY
To resume normal playback
PLAY
Press PLAY.
Notes:
• The DVD player does not play back sound and subtitles during scan
reverse and forward of DVD video discs. However, the DVD player
plays back sound during fast forward or fast reverse playback of
audio CDs.
• The ×2, ×8 and ×30 speeds are only approximate speeds. These
speeds may vary slightly from disc to disc.
18
Downloaded from www.Manualslib.com manuals search engine
Press PLAY.
Note:
The sound is muted during frame by frame playback.
1
2
3
1
2
4
5
6
4
5
6
7
8
9
7
8
9
+10
0
+10
0
PLAY
3
SLOW
2
1
REMOTE CONTROLLER
REMOTE CONTROLLER
DVD
Playing in Slow-Motion
DVD
CD
Resuming Playback from the Same Location
You can stop playback and resume playback later from the
same location on the disc.
1
Press SLOW during playback.
S LOW
STOP
The playback speed becomes half the
normal speed.
Press STOP at the location where
you want to interrupt playback.
• The DVD player memorizes the location
where you stopped playback.
• The DVD player stores that location in its
memory even if you turn off the player.
Each time you press the SLOW button, the
slow-motion speed changes.
TV screen
1/2
1/2 the
normal speed
1/8
1/8 the
normal speed
To resume normal playback
PLAY
Press PLAY.
Note:
The sound is muted during slow-motion playback.
Downloaded from www.Manualslib.com manuals search engine
1/16
1/16 the
normal speed
2
Basic Playback
You can play back a DVD video disc in slow-motion.
Press LAST PLAY.
LAST PLAY
The DVD player resumes playback from
the location where you stopped playback.
Notes:
• The Last Play function is canceled when:
– you unplug the DVD player from the wall outlet after you stop
playback.
– you eject the disc.
– you adjust/change parental lock 37 or select a disc menu
language setting 36 .
• There may be a difference of the location where playback resumes
depending on the discs.
19
Locating a Specific Title, Chapter, or Track
DVD video disc
Title 1
Chapter 1
Chapter 2
Title 2
Audio CD
Chapter 1 Chapter 2 Chapter 3
Track 1
Track 2
Track 3
Track 4
Track 5
Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Audio
CDs are divided into tracks. You can quickly locate any specific title, chapter, or track.
DVD
Locating a Title Using the Title Menu
DVD
Locating a Title
If a DVD video disc contains a title menu, you can locate a
specific title using the title menu function.
If a DVD video disc contains title numbers, you can locate a
specific title by directly selecting a title number.
1
1
TITLE
Press TITLE.
Press SEARCH.
SEARCH
The title menu appears on the TV screen.
Make sure that the space next to TITLE is
highlighted.
e.g.
Example of a title menu
TITLE 1
TITLE 2
TITLE 3
TITLE 4
T I T LE : 1
CHAPTER :
2
1
2
3
4
5
6
7
8
9
+10
0
Press the corresponding number
buttons for the title you want.
e.g. To select title 2
T I T LE : 2
CHAPTER :
2
2
ENTER
Press /
you want.
/
/
1
to select the title
To select title 12
If the titles in the title menu are assigned a
number, you can directly locate a specific
title by pressing its assigned number with
the number buttons.
1
3
3
1
PLAY
2
T I T LE : 1 2
CHAPTER :
1
Press PLAY.
The DVD player starts playback from
chapter 1 of the selected title.
Press ENTER.
ENTER
The DVD player starts playback from
chapter 1 of the selected title.
Notes:
• The instructions above describe the basic procedure. The
procedure varies depending on the contents of the DVD video disc.
If different instructions appear on the TV screen, follow those
instructions.
• If you display the title menu during playback and press the TITLE
button again without selecting any title, the DVD player resumes
playback from the point where you first pressed the TITLE button.
20
Downloaded from www.Manualslib.com manuals search engine
Notes:
• You can shift the highlight between next to TITLE and CHAPTER by
pressing /
.
• Pressing the CLEAR button resets the TITLE and CHAPTER
numbers. To clear the TITLE, CHAPTER display, press the
SEARCH button several times.
• You can select a preferred language for on-screen displays.
30 , 35
/
/
/
ENTER
TITLE
Number buttons
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
SEARCH
PLAY
UP
DOWN
REMOTE CONTROLLER
Locating a Specific Chapter or Track Directly
If you know the chapter or track number you want to play
back, you can locate it directly.
1
DVD
CD
You can locate consecutive chapters or tracks.
Press SEARCH.
SEARCH
Press Down
or Up
repeatedly to display the chapter or
track number you want.
DOWN
Skip steps 1 and 2 if you are using an
audio CD.
e.g. DVD video disc
2
T I T LE : 1
CHAPTER :
The DVD player starts playback from the
selected chapter or track.
UP
1
: To locate preceding chapters or
tracks
When you press the DOWN
button, the DVD player starts
playback from the beginning of the
current chapter or track.
When you press the DOWN
button twice, the DVD player starts
playback from the beginning of the
preceding chapter or track.
Press
to highlight the space
next to CHAPTER.
ENTER
e.g. DVD video disc
3
1
2
3
4
5
6
7
8
9
+10
0
T I T LE : 1
CHAPTER :
1
Press the corresponding number
buttons of the chapter or track you
want.
You can use the +10 button to select
numbers from 10 through 99.
: To locate succeeding chapters or
tracks
e.g. To select chapter or track 25
DVD video disc Audio CD
•
2
•
+10
T I T LE : 1
CHAPTER : 2 5
5
CD
Locating a Specific Chapter or Track
Basic Playback
DVD
Note:
Some titles may not display the chapter number.
TRACK : 2 5
DVD
4
PLAY
+10
5
Locating a Specific Location Within a Title
Press PLAY.
The DVD player starts playback from the
selected chapter or track.
You can locate a specific location by entering the time (hours,
minutes, seconds).
1
Press SEARCH twice.
SEARCH
TIME –:––:––
To select a title and chapter number at the same time
e.g. To select chapter 25 in title 2
SEARCH
PLAY
2
2
Title number
2
2
1
3
4
5
6
7
8
9
+10
0
5
e.g.
Chapter number
T I T LE : 2
CHAPTER : 2 5
Downloaded from www.Manualslib.com manuals search engine
1
2
5
3
0
TIME 1:25:30
3
PLAY
Note:
Pressing the CLEAR button resets the TITLE and CHAPTER
numbers. To clear the TITLE, CHAPTER display, press the SEARCH
button several times.
Press the number buttons to enter
the time.
Press PLAY.
The DVD player starts playback from the
specified location.
Note:
Some discs may not respond to this locating.
21
Playing Repeatedly
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
PLAY
A-B
REPEAT
REMOTE CONTROLLER
You can play back a specific title, chapter, track, or segment repeatedly. (Title
repeat, chapter/track repeat, A-B repeat)
DVD
DVD
CD
Repeating a Title, Chapter, or Track
Repeating a Specific Segment
You can play back the same title, chapter, or track repeatedly.
(Title, chapter/track repeat)
You can play back a specific segment repeatedly.
(A-B repeat)
1
1
2
Select the title, chapter, or track
you want to repeat.
20 , 21
REPEAT
CD
A-B
Press REPEAT.
Press A-B at the beginning of the
segment (point A) you want to play
repeatedly.
A–
Each time you press the REPEAT button,
the repeat mode changes as follows.
• DVD video disc
CHAPTER REPEAT
T I TLE REPEAT
Repeats the
same chapter.
Repeats the
same title.
2
A-B
Press A-B again at the end of the
segment (point B).
A–B
REPEAT OFF
Resumes normal
playback.
The DVD player automatically returns to
point A and starts repeat playback of the
selected segment (A-B).
• Audio CD
TRACK REPEAT
ALL REPEAT
REPEAT OFF
To resume normal playback
CLEAR
Press CLEAR.
Repeats the
same track.
Repeats the
entire disc.
Resumes normal
playback.
To resume normal playback
CLEAR
Press CLEAR.
Notes:
• You can specify a segment only within the current title.
• You cannot set the A-B repeat function for segment that include
multiple camera angles.
• There may be a slight difference between point A and the location
where playback actually resumes depending on the discs.
22
Downloaded from www.Manualslib.com manuals search engine
Playing in a Favorite Order
TITLE : 2
CHAPTER : 25
TITLE : 2
CHAPTER : 12
/
TITLE : 1
CHAPTER : 1
2
5
6
7
8
9
+10
0
/
2
2
3
1
4
/
CLEAR
3
1
You can combine your favorite titles, chapters, or tracks and play them
back in any order. You can program up to 30 items into the memory.
(Memory playback)
REMOTE CONTROLLER
DVD
CD
Setting Titles, Chapters, or Tracks in a Favorite Order
The DVD player automatically plays back titles, chapters, or tracks in the order you program.
1
Insert a disc and press MEMORY
during stop.
MEMORY
1
2
3
4
5
The following menu appears.
SELECT :
MEMORY
1
2
3
4
5
T
T
T
T
T
–
–
–
–
–
–C–
–C–
–C–
–C–
–C–
–
–
–
–
–
P RE SS
EX I T RETURN
6
7
8
9
10
0
T
T
T
T
T
–
–
–
–
–
–C–
–C–
–C–
–C–
–C–
SELECT :
MEMORY
–
–
–
–
–
T
T
T
T
T
02C25
02C12
01C – –
04C02
– –C– –
PRESS
EX I T RETURN
NEXT
9
ENTER S E T
6
7
8
9
10
0
T
T
T
T
T
–
–
–
–
–
–C–
–C–
–C–
–C–
–C–
–
–
–
–
–
NEXT
9
ENTER S E T
To select another chapter in the same title,
you do not need to select the title number.
2
2
1
3
4
5
6
7
8
9
+10
0
ENTER
Select the items you want in order
by pressing the number buttons,
then ENTER for each item.
Each time you press the
/
button, the
-- indication next to T and C is highlighted in
turn. Highlight where you want to enter, then
press the number buttons.
e.g. To play back chapter 25 in title 2, chapter
12 in title 2, all the chapters in title 1, and
chapter 2 in title 4.
Title number
2
PLAY
2
Press PLAY while the MEMORY
menu appears on the TV screen.
The DVD player starts memory playback.
To change the programmed items
1
While the MEMORY menu appears on the TV screen,
/ to move the highlighted bar to the item
press
you want to change.
2
Change the item following the instructions in step 2.
Chapter number
ENTER
Memory 1
3
Advanced Playback
T: Title number
C: Chapter number
5
To cancel the programmed items
ENTER
Memory 2
1
2
1
While the MEMORY menu appears on the TV screen,
press
/
to move the highlighted bar to the item
you want to cancel.
2
Press the CLEAR button.
ENTER
Memory 3
1
Memory 4
4
ENTER
2
To select tracks from an audio CD in order, press
the number buttons for the track, then press the
ENTER button for each item you want.
To resume normal playback from memory
playback
CLEAR
Press CLEAR.
The MEMORY indicator disappears.
Notes:
• If you press the MEMORY button during memory playback, the programmed items will be displayed.
• You cannot select title, chapter, and track numbers not included on the disc.
• If you press the MEMORY or RETURN button while the MEMORY menu appears on the TV screen, the MEMORY menu disappears.
• The programmed items will be cleared when:
– you turn off the DVD player, or
– you remove the disc.
• Memory playback is not available for some type of DVD video discs.
Downloaded from www.Manualslib.com manuals search engine
23
Playing in Random Order
1
2
3
4
5
6
7
8
9
+10
0
TITLE : 1
CHAPTER : 3
TITLE : 2
CHAPTER : 2
TITLE : 3
CHAPTER : 1
Number buttons
CLEAR
SEARCH
PLAY
UP
RANDOM
REMOTE CONTROLLER
You can play back titles, chapters within a title, or tracks in random order.
(Random playback)
DVD
DVD
Playing Titles in Random Order
CD
Playing Chapters or Tracks in Random Order
The DVD player automatically selects the titles in a DVD video
disc and plays them back randomly.
The DVD player automatically selects chapters within a title, or
tracks on an audio CD, and plays them back randomly.
1
1
RANDOM
Press RANDOM twice during stop.
T I T LE RANDOM
3
2
1
4
5
6
7
8
9
+10
0
Press the appropriate number
buttons for the title which contains
the chapters you want to play back
in random order.
SEARCH
Skip this step if you are using audio CD.
e.g. To play back the chapters in title 2 in
random order
If you press the RANDOM button during
playback, the DVD player automatically
starts random playback after finishing the
current title.
SEARCH
2
2
RANDOM
T I T LE : 2
CHAPTER :
1
Press RANDOM during stop.
CHAPTER RANDOM
T I T LE : 2
: 1
CHAPTER
2
PLAY
If you press the RANDOM button during
playback, the DVD player automatically
starts random playback after finishing the
current chapter or track.
Press PLAY.
The DVD player starts random playback.
Press the PLAY button within about 5
seconds after you press the RANDOM
button.
3
Press PLAY.
PLAY
The DVD player starts random playback.
Press the PLAY button within about 5
seconds after you press the RANDOM
button.
To resume normal playback
CLEAR
Press CLEAR.
Note:
You cannot use the random playback function in conjunction with the
memory playback function.
24
Downloaded from www.Manualslib.com manuals search engine
To resume normal playback
CLEAR
Press CLEAR.
Notes:
• You cannot use the random playback function in conjunction with
the memory playback function.
• If you press the UP
button during random playback, the DVD
player goes to another chapter or track and starts playback.
Zooming a Picture
/
/
/
ZOOM
Zoom playback
1
2
3
4
5
6
7
8
9
+10
0
CLEAR
REMOTE CONTROLLER
You can magnify areas within a picture. (Zoom playback)
DVD
Zooming a Picture
You can zoom a picture. You can shift the zoom point as well.
ZOOM
Press ZOOM during normal
playback or slow motion.
The DVD player magnifies in the center of
the picture.
ENTER
If you press / / / during zoom
playback, the zoom point shifts. If the
zoom point reaches the limit, the color of
“ZOOM” changes.
If you press CLEAR, the zoom point
returns to the center of the picture.
Advanced Playback
ZOOM
To resume normal playback
ZOOM
Press ZOOM during zoom playback.
Notes:
• During still playback, the ZOOM button cannot turn the zoom on or
off.
• Zooming does not work on the sub-pictures such as subtitles or
menu screens included on DVD video discs.
Downloaded from www.Manualslib.com manuals search engine
25
Selecting the Camera Angle
ANGLE : 1
ANGLE : 2
1, 2
2
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
ANGLE : 3
REMOTE CONTROLLER
You can select a preferred camera angle to watch a scene.
DVD
Changing the Camera Angle
If the scene was recorded from multiple angles, you can easily change the camera angle of the scene you are watching.
1
ANGLE
Press ANGLE while playing back a
scene recorded from multiple
angles.
To turn off the angle number indication
CLEAR
Press CLEAR.
Press the ANGLE button while the angle
icon in the DVD display is flashing.
ANGLE 1
2
ANGLE
Current angle
number appears
Press ANGLE or
while the angle
number appears on the TV screen.
Each time you press the ANGLE or
button, the camera angle changes.
ENTER
ANGLE 1
ANGLE 2
ANGLE 3
: Cycles backwards
You can change the camera angle directly
by pressing the number buttons
corresponding to its angle number instead
of using the / buttons.
Notes:
• You can change the camera angle during still playback. The camera angle changes to the new setting when you resume normal playback.
• While playing back a title that contains at least one scene recorded from multiple angles, the angle icon indicator illuminates in the DVD display.
26
Downloaded from www.Manualslib.com manuals search engine
Selecting a Language
Good morning!
Bon jour!
1, 2
2
¡Buenos días!
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
REMOTE CONTROLLER
You can select a preferred language.
DVD
Selecting a Playback Audio Setting
You can select a preferred language and sound recording system from those included on the DVD video disc.
1
AUDIO
Press AUDIO during playback.
To turn off the audio setting indication
CLEAR
2CH
Audio
channel
Recording
system
Current audio
setting
appears for
about 3
seconds
Language
Position number
The abbreviation of the language appears
instead of the language name. Refer to the
list of languages and their abbreviations.
39
2
AUDIO
Press AUDIO or
while the audio
setting appears on the TV screen.
Each time you press the AUDIO or
button, the audio settings included on the
DVD video disc change.
Press CLEAR.
About recording systems
This DVD player uses the Dolby Digital and PCM
recording systems and cannot play back DVD video discs
recorded in any other recording system.
AC-3 5.1 Channel is displayed as “AC-3 6CH.”
Note: Total channels available in AC-3 may vary from 1–6.
Discs and output sounds
Audio CDs
DVD video discs
ENTER
Linear PCM
e.g.
Sound recording
system
Dolby Digital
48kHz
2CH
AUDI O 2 FRE AC-3
6CH
Audio setting on
the setting
screen
(see page 30,31)
AC-3
PCM
AC-3
or
PCM
AC-3
AUDI O 3 SPA PCM
2CH
ANALOG AUDIO
OUT jacks
–
O
O
O
*
PCM
PCM PCM
DIGITAL AUDIO Dolby
Digital
(48 kHz) (48 kHz) (48 kHz)
OUT jack
bitstream
: Cycles backwards
Linear PCM
44.1 kHz
96kHz
AUDI O 1 ENG PCM
PCM
O
–
Advanced Playback
AUDI O 1 ENG PCM
**
AC-3
or
PCM
O
PCM
(44.1 kHz)
* : 48 kHz processed
** : 96 kHz processed
Notes:
• When you turn on the DVD player or replace a disc, player returns to the initial default setting. 30
• When you select a sound which is not included on the disc, the DVD player plays a prior sound programmed on the disc.
Downloaded from www.Manualslib.com manuals search engine
27
Selecting Subtitles
Good evening!
Bon soir!
SUBTITLE
SUBTITLE
ON/OFF
/
3
1
2
4
5
6
7
8
9
+10
0
CLEAR
¡Buenas tardes!
REMOTE CONTROLLER
You can display subtitles on the TV screen and select a preferred subtitle
language.
DVD
Selecting a Subtitle Language
Displaying Subtitles
You can display subtitles from those included on the DVD
video disc.
SUBTITLE
ON / OFF
DVD
Press SUBTITLE ON/OFF during
playback.
You can select the subtitle language from those included on
the DVD video disc.
1
Press SUBTITLE during playback.
SUBTITLE
SUBT I TLE 1 ENG ON
SUBT I TLE 1 ENG ON
Good morning!
Appears for
about 3 seconds
Language
Position number
The abbreviation of the language appears
instead of the language name. Refer to the
list of languages and their abbreviations.
39
Subtitles
2
SUBTITLE
To turn off the subtitles
ENTER
SUBTITLE
ON / OFF
Press SUBTITLE ON/OFF.
Press SUBTITLE or
while the
subtitle setting appears on the TV
screen.
Each time you press the SUBTITLE or
button, the subtitle languages included on
the DVD video disc change.
e.g.
The subtitles disappear.
SUBT I TLE 1 ENG OFF
Current subtitle
setting appears
for about 3
seconds
SUBT I TLE 1 ENG ON
Appears for
about 3 seconds
SUBT I TLE 2 FRE ON
SUBT I TLE 3 SPA ON
: Cycles backwards
Notes:
• Some DVD video discs are set to display subtitles automatically, and
you cannot turn them off even if you set the subtitle function to off.
• During some scenes, the subtitles may not appear immediately after
you press the SUBTITLE ON/OFF button.
To turn off the subtitle setting indication
CLEAR
Press CLEAR.
Notes:
• When you turn on the DVD player or replace a disc, player returns
to the initial default setting. 36
When you select a subtitle language which is not included on the disc,
the DVD player plays a prior language programmed on the disc.
• During some scenes, the subtitles may not appear immediately after
you change the subtitle language by pressing the
/
buttons.
28
Downloaded from www.Manualslib.com manuals search engine
Using the On-Screen Display
DISPLAY
3
1
2
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
You can view information about a disc and its operational status on the
TV screen.
DVD
CD
Checking the Operational Status
You can view the current title number, track number, and total
playing time of the disc on the TV screen.
DISPLAY
Press DISPLAY during stop.
DVD
CD
Checking the Remaining Time and Setting Status
You can view the elapsed time, remaining time, and setting
status of the disc on the TV screen.
1
DISPLAY
Press DISPLAY during playback.
DVD video disc
e.g.
T I TLE : 2
CHAPTER :
Audio CD
e.g.
Current title number
Current chapter number
Current title number
First chapter number in
the current title
STOP
1
e.g.
Operational
status
Operational status
PLAY
– 0 : 50 : 45
T I TLE : 3
– 0 : 10 : 24
2
CHAPTER :
ELAPSED 0 : 10 : 15
CHAPTER REPEAT
First track number of the disc
STOP
TRACK : 1
Remaining time
in the current title
Remaining time
in the current
chapter
Elapsed time of
the current title
Operational
status
Playback mode
TOTAL 0 : 46 : 30
The REMAIN indicator and remaining time in
the current title appear in the DVD display.
Total playing
time of the disc
Audio CD
Current track number
e.g.
When an audio CD is in the DVD player, the
TOTAL indicator and total playing time of the
disc appear.
– 0 : 02 :
TRACK : 3
D I SC
– 0 : 43 :
ELAPSED 0 : 01 :
TRACK REPEAT
PLAY
00
00
20
To turn off the on-screen display
Operational status
Remaining
time in the
current track
Remaining time
of the disc
Elapsed time of
the current track
Playback mode
DISPLAY
Press DISPLAY again.
Advanced Playback
DVD video disc
The REMAIN indicator and remaining time in
the current track appear in the DVD display.
2
DISPLAY
Press DISPLAY again during
playback.
When you play back an audio CD, the onscreen display turns off.
e.g.
PLAY
– 0 : 50 : 45
T I TLE : 3
– 0 : 10 : 24
CHAPTER :
2
ELAPSED 0 : 10 : 15
AUD I O 1 ENG AC - 3 2CH
SUBT I TLE 1 2 ENG ON
ANGLE 1
Current audio
setting
Current subtitle
setting
Current angle
setting
The abbreviation of the language (e.g. ENG)
appears instead of the language name. Refer to
the list of languages and their abbreviations.
39
To turn off the on-screen display
DISPLAY
Press DISPLAY again.
Downloaded from www.Manualslib.com manuals search engine
29
Customizing the Function
Settings
1
2
2
SET UP MENU
AUDIO SETTING
FUNCTION
3
1
2
4
5
6
7
8
9
+10
0
DISPLAY
REMOTE CONTROLLER
You can change the default settings to customize performance to your
preference.
DVD
CD
Displaying the SET UP MENU Screen
The SET UP MENU screen asks you to select a setting category from AUDIO SETTING, FUNCTION and DISPLAY. Each selected
category will provide you setting details via the succeeding screen.
1
SET UP
Press SET UP during stop.
The SET UP MENU screen appears.
SET UP MENU
1
2
3
RETURN
EX I T SET UP
2
Press
ENTER
SELECT:
AUDI O SETTING
AUDI O
A U D I O OUT S E L .
D RANGE CONTROL
VOCAL KARAOKE
/
ENTER
SET UP MENU
1
2
3
For the setting details,
see page in
.
to select the category, then press ENTER.
RETURN
EX I T SET UP
AUDIO SETTING
SELECT:
AUDI O SETTING
AUDI O
A U D I O OUT S E L .
D RANGE CONTROL
VOCAL KARAOKE
ENTER
RETURN
EX I T SET UP
ENTER
SELECT:
A
1UDI O
A U D I O OUT S E L .
D RANGE CONTROL
VOCAL KARAOKE
ENG
PCM
ON
OFF
31
ENTER
ENTER
SET UP MENU
1
2
3
SELECT:
F U N C T I ON
BLACK LEVEL
T I TLE STOP
V I DEO OUT SEL.
REMOTE C ON F I R M .
OSD
RETURN
EX I T SET UP
ENTER
D I SPLAY
ENTER
RETURN
EX I T SET UP
The SET UP MENU screen disappears if you press the SET UP button while it is displayed.
30
NML.
OFF
S
ON
ON
ENTER
SELECT:
ENG
SCREEN D I S P L A Y S
TV SHAPE
16 : 9
ON
A N G L E I CON
--SUBT I T L E
ENG
D I S C MENU
Note:
Downloaded from www.Manualslib.com manuals search engine
SELECT:
33
RETURN
EX I T SET UP
SELECT:
D I SPLAY
SCREEN D I S P L A Y S
TV SHAPE
A N G L E I CON
SUBT I T L E
D I S C MENU
RETURN
EX I T SET UP
ENTER
ENTER
SET UP MENU
1
2
3
FUNCT I ON
B LA C K L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE C ON F I R M .
OSD
ENTER
35
AUDIO SETTING
AUD I O SETT I NG
SELECT :
AUDI O
A U D I O O U T S EL.
D RA NG E CO NT R O L
V O C A L KA R A OKE
RETURN
EX I T SET UP
To select a preferred language from those included on the disc. 25
ENG
PCM
ON
OF F
To switch AC-3 (ANALOG OFF) and PCM (ANALOG ON). 11
12
13
14
25
To turn on or off the function that makes faint sounds easier to hear even if you lower the volume
in late hours playback.
ENTER
To turn on or off the vocal assist in DVD KARAOKE disc playback.
DVD
CD
Setting the Audio Sound
After you select AUDIO SETTING on the SET UP MENU screen 30 , adjust to your preference.
3
Press
/
to select the item, then press ENTER.
The setting screen of your selected item appears.
ENTER
When AUDIO is selected:
SELECT :
AUDI O
PREFERENCE
ENTER
E N G L I SH
FRENCH
S P A N I SH
CH I NESE
GERMAN
I T A L I AN
JAPANESE
DUTCH
KOREAN
MALAY
DVD
Select a preferred language
by pressing / / / ,
and then press ENTER.
AUD I O SETT I NG
SEL ECT :
AUDI O
A U D I O OUT SEL.
D RANGE CONTROL
VOCAL KARAOKE
ENG
PCM
ON
OF F
ENTER
ENTER
RETURN
EX I T SET UP
DESCRIPT I VE SERV I CE OFF
ENTER
EX I T SET UP
• Some DVD video discs contain special output sound that
describes the actions on-screen for visually impaired
persons. When you set DESCRIPTIVE SERVICE to “ON”
by pressing the AUDIO button, the DVD player
automatically plays back this special feature.
When AUDIO OUT SEL. is selected:
A U D I O OUT
SEL.
A U D I O OUT
SEL.
PCM
SELECT:
PCM
DVD
ENTER
• Some DVD video discs may not include
your preselected language. In this case,
the DVD player automatically plays back
the disc’s initial language offering.
CD
Select the output sound
type AC-3 or PCM by
pressing /
, and then
press ENTER.
AUD I O SETT I NG
SELECT:
AUDI O
A U D I O OUT SEL.
D RANGE CONTROL
VOCAL KARAOKE
ENG
PCM
ON
OF F
ENTER
AC - 3
RETURN
EX I T SET UP
ENTER
Function Setup
ENTER
RETURN
EX I T SET UP
ENTER
• Select the output sound type according to your system
connection. 12 – 15 , 27
When D RANGE CONTROL is selected:
D R A N G E C O N T R O L SELECT:
D RANGE CONTROL
ON
ON
DVD
Select ON or OFF by
pressing /
, and then
press ENTER.
AUD I O SETT I NG
SELECT:
AUDI O
A U D I O OUT SEL.
D RANGE CONTROL
VOCAL KARAOKE
ENG
PCM
ON
OF F
ENTER
OFF
ENTER
RETURN
EX I T SET UP
ENTER
ON: Dynamic range is reduced.
OFF: Full dynamic range is maintained.
Downloaded from www.Manualslib.com manuals search engine
RETURN
EX I T SET UP
ENTER
• This function works on playback of Dolby Digital recorded
discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD video discs.
31
Customizing the Function
Settings (continued)
4
AUDIO
3
1
3
2
4
5
6
7
8
9
+10
0
ENTER
RETURN
REMOTE CONTROLLER
RETURN
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
When VOCAL KARAOKE is selected:
VOCAL
SELECT :
KARAOKE
OFF
VOCAL KARAOKE
ON
DVD
Select ON or OFF by
pressing /
, and then
press ENTER.
AUD I O SETT I NG
SELECT:
AUDI O
A U D I O OUT SEL.
D RANGE CONTROL
VOCAL KARAOKE
ENG
PCM
ON
OF F
ENTER
OFF
ENTER
RETURN
EX I T SET UP
ON:
OFF:
ENTER
RETURN
EX I T SET UP
ENTER
The vocal is output when it is recorded on the disc.
The vocal is not output.
The vocal assist feature is used during playback of AC-3 encoded DVD KARAOKE discs. This feature allows
you to turn off vocal audio tracks, or restore them for background accompaniment.
4
Press SET UP.
SET UP
The setting screen disappears.
32
Downloaded from www.Manualslib.com manuals search engine
CD
FUNCTION
FUNCT I ON
SELECT:
BLACK L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE C O N F I R M .
OSD
RETURN
EX I T SET UP
To select the black level of playback pictures.
NML.
OFF
S
ON
ON
To turn on or oft the function that automatically stops playback after playing one title.
To switch S and COLOR DIFFERENCE. (COMPONENT VIDEO)
To turn on or off the confirmation beeper for each remote command.
ENTER
To turn on or off the operational status display (On-screen display) on the TV screen.
DVD
Setting the Functions
After you select FUNCTION on the SET UP MENU screen 30 , adjust to your preference.
3
Press
/
to select the item, then press ENTER.
The setting screen of your selected item appears.
ENTER
When BLACK LEVEL is selected:
ENTER
BLACK LEVEL
SELECT:
BLACK LEVEL
NML.
NORMAL
DVD
Select a preferred black
level by pressing
/ ,
and then press ENTER.
ENHANCED
RETURN
EX I T SET UP
ENTER
FUNCT I ON
SELECT:
BLACK L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE CONF I R M .
OSD
NML.
OFF
S
ON
ON
ENTER
RETURN
EX I T SET UP
ENTER
ENTER
Select the brightness of playback pictures.
NORMAL:
Standard black level.
ENHANCED: Expanded black level.
DVD
When TITLE STOP is selected:
T I T L E STOP
SELECT:
T I T L E STOP
OFF
ON
Select ON or OFF by
pressing / , and then
press ENTER.
ENTER
OFF
FUNCT I ON
SELECT:
BLACK L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE CONF I R M .
OSD
NML.
OFF
S
ON
ON
ENTER
RETURN
EX I T SET UP
ENTER
ENTER
OFF: Player continues after playback of a title is completed.
ON: Player stops after playback of a title is completed.
When VIDEO OUT SEL. is selected :
SELECT :
VIDEO OUT SEL.
S
VIDEO OUT SEL.
S
DVD
Select S or C by pressing
/ , and then press
ENTER.
ENTER
C
FUNCT I ON
SELECT:
BLACK L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE C O N F I R M .
OSD
Function Setup
RETURN
EX I T SET UP
NML.
OFF
S
ON
ON
ENTER
RETURN
EX I T SET UP
ENTER
S: Select when the S VIDEO OUT jack is connected.
C: Select when the COMPONENT VIDEO OUT jacks (Y /Cb / Cr) are
connected.
Downloaded from www.Manualslib.com manuals search engine
RETURN
EX I T SET UP
ENTER
• If you select “C” when not using the
COMPONENT VIDEO OUT jacks (Y / Cb /
Cr), the on-screen display will be lost. In
this event, additionally connect the VIDEO
OUT jack (yellow). Select the appropriate
input on your TV and start this process again.
33
Customizing the Function
Settings (continued)
4
3
1
3
2
4
5
6
7
8
9
+10
0
ENTER
RETURN
REMOTE CONTROLLER
RETURN
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
When REMOTE CONFIRM. is selected:
REMOTE CONF I RM.
ON
CD
Select ON or OFF by
pressing / , and then
press ENTER.
SELECT :
ON
REMOTE CONF I RM.
DVD
ENTER
OFF
FUNCT I ON
SELECT:
BLACK L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE C O N F I R M .
OSD
NML.
OFF
S
ON
ON
ENTER
RETURN
EX I T SET UP
RETURN
EX I T SET UP
ENTER
ENTER
ON: Beeper sounds with each remote operation.
OFF: The beeper does not sound.
When OSD is selected:
DVD
SELECT:
OSD
ON
OSD
CD
Select ON or OFF by
pressing / , and then
press ENTER.
ENTER
ON
RETURN
EX I T SET UP
OFF
ENTER
Press SET UP.
SET UP
The setting screen disappears.
34
Downloaded from www.Manualslib.com manuals search engine
SELECT:
NML.
OFF
S
ON
ON
ENTER
ON: Operational modes are displayed on-screen (e.g.”PLAY”)
OFF: Operational modes are not displayed.
4
FUNCT I ON
BLACK L E V E L
T I TLE STOP
V I D E O OU T S E L .
REMOTE C O N F I R M .
OSD
RETURN
EX I T SET UP
ENTER
CD
DISPLAY
D I SPLAY
SELECT :
To select the display language.
ENG
SCREEN D I S P L A Y S
TV SHAPE
16 : 9
A N G L E I CON
ON
--SUBT I T L E
ENG
D I S C MENU
RETURN
EX I T SET UP
To select a picture size according to the aspect ratio of your TV.
To display the angle icon indicator on screen.
To select a preferred subtitle language from those included on the DVD video disc. 28
ENTER
To select a preferred disc menu language from those included on the DVD video disc.
DVD
CD
Setting the Displays
After you select DISPLAY on the SET UP MENU screen 30 , adjust to your preference.
3
Press
/
to select the item, then press ENTER.
The setting screen of your selected item appears.
ENTER
When SCREEN DISPLAY is selected:
SCREEN
ENTER
D I S P L A Y S SELECT:
E NG L I S H
F R E NCH
SP AN I SH
DVD
CD
Select a preferred language
by pressing / , and
then press ENTER.
ENTER
SELECT:
D I SPLAY
ENG
SCREEN D I S P L A Y S
TV SHAPE
16 : 9
ON
A N G L E I CON
--SUBT I T L E
ENG
D I S C MENU
ENTER
RETURN
EX I T SET UP
RETURN
EX I T SET UP
ENTER
When TV SHAPE is selected:
SELECT:
TV S H A P E
16 : 9
TV S H A P E
DVD
Select your TV type by
pressing / , and then
press ENTER.
16 : 9
4: 3
WIDE
NORMAL
ENTER
SELECT:
D I SPLAY
SCREEN D I S P L A Y S
TV SHAPE
A N G L E I CON
SUBT I T L E
D I S C MENU
ENG
16 : 9
ON
--ENG
ENTER
ENTER
RETURN
EX I T SET UP
ENTER
ENTER
16:9 (WIDE): Select when a 16:9 wide TV is connected. • The displayable picture size is preset on the DVD video
4:3 (NORMAL): Select when a 4:3 normal TV is connected. disc. Therefore, the playback picture of some DVD video
discs may not conform to the picture size you select.
• When you play DVD video discs recorded in the 4:3
picture size only, the playback picture always appears in
the 4:3 picture size regardless of the TV shape setting.
If you select 4:3 (NORMAL):
SELECT:
TV S H A P E
LB
D I S P L A Y MODE
LB
PS
PAN - SCAN
RETURN
EX I T SET UP
Select PS or LB by
pressing / , and then
press ENTER.
LETTERBOX
ENTER
ENTER
ENTER
■ Pressing the PS/LB button during playback or slow motion playback
allows switching of the Pan-scan and the Letterbox temporarily.
The switching of the PS and LB can not be made
PS / LB
unless the disc is recorded in a 16:9 and supports
the PS/LB switching.
Downloaded from www.Manualslib.com manuals search engine
PS (PAN-SCAN):
Displays pictures cropped to fill your TV
screen. Either or both sides of the picture
are cut off.
LB (LETTER BOX):
Displays theatrical images with masking
bars above and below the picture.
PS (PAN-SCAN)
Function Setup
RETURN
EX I T SET UP
LB (LETTERBOX)
35
Customizing the Function
Settings (continued)
4
ANGLE
SUBTITLE
MENU
TITLE
1
2
3
4
5
6
7
8
9
+10
0
3ENTER
RETURN
REMOTE CONTROLLER
RETURN
: If you press the RETURN button while a menu appears on the screen,
you will return to the previous menu screen displayed.
DVD
ANGLE
I CON
ANGLE
I CON
SELECT:
ON
ON
Select ON or OFF by
pressing / , and then
press ENTER.
ENTER
OFF
CD
SELECT:
D I SPLAY
SCREEN D I S P L A Y S
TV SHAPE
A N G L E I CON
SUBT I T L E
D I S C MENU
ENG
16 : 9
ON
--ENG
ENTER
RETURN
EX I T SET UP
RETURN
EX I T SET UP
ENTER
ENTER
ON: The angle icon automatically appears in white on the TV screen while a scene recorded from multiple angles is played
back. When you display the angle number on the screen by pressing the ANGLE button, the angle icon is lit in red.
OFF: The angle icon is not displayed.
SELECT:
SUBT I TLE
PREFERENCE
E N G L I SH
I T A L I AN
JAPANESE
FRENCH
DUTCH
SPAN I SH
KOREAN
CH I NESE
MALAY
GERMAN
NO SUBT I TLES
Select a preferred language
by pressing / / / ,
and then press ENTER.
ENTER
SELECT:
D I SPLAY
SCREEN D I S P L A Y S
TV SHAPE
A N G L E I CON
SUBT I T L E
D I S C MENU
ENG
16 : 9
ON
--ENG
ENTER
EXTENDED FEATURES
ENTER
EX I T SET UP
RETURN
EX I T SET UP
OFF
Some DVD video discs contain special subtitles, an enhancement of
closed captioning for hearing impaired persons. When you set
EXTENDED FEATURES to “ON” by pressing the SUBTITLE button,
the DVD player automatically displays these special subtitles.
SELECT:
D I S C MENU
PREFERENCE
E N G L I SH
FRENCH
SPAN I SH
CH I NESE
GERMAN
I T A L I AN
JAPANESE
DUTCH
KOREAN
MALAY
Select a preferred language
by pressing / / / ,
and then press ENTER.
ENTER
ENTER
• Some DVD video discs may not include
your preselected language. In this case,
the DVD player automatically displays
subtitles consistent with the disc’s initial
language setting.
SELECT:
D I SPLAY
SCREEN D I S P L A Y S
TV SHAPE
A N G L E I CON
SUBT I T L E
D I S C MENU
ENG
16 : 9
ON
--ENG
ENTER
I RETURN
EX I T SET UP
ENTER
RETURN
EX I T SET UP
ENTER
To change the language while a disc is inserted:
1) Press the TITLE or MENU button to display the disc menu.
2) Press the SET UP button.
If the disc menu has only one language, the display does
not appear.
4
SET UP
Press SET UP.
The setting screen disappears.
36
Downloaded from www.Manualslib.com manuals search engine
3) Press the SET UP button repeatedly to select the
language. Refer to “Table of Languages”. 39
4) Press the ENTER button.
The disc menu is displayed in the selected language.
1, 7
4, 5, 6
3, 4, 5, 6
Setting the Parental Lock
1
2
3
4
5
6
7
8
9
+10
0
RETURN
CLEAR
2, 3
STOP
REMOTE CONTROLLER
You can use the parental lock function only with DVD video discs
equipped with the parental lock function.
DVD
Setting the Parental Lock
DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental lock
level and the way a DVD video disc can be controlled may vary from disc to disc. For example, if the disc allowed you could edit out
violent scenes unsuitable for children and replace them with more suitable scenes, or lock out playback of the disc altogether.
1
Press SET UP during stop.
SET UP
5
The SET UP MENU appears on the TV
screen.
2
ENTER
The following menu appears.
Press 9 twice.
9
PARENTAL
The following menu appears.
PARENTAL
Press
/ to select the country
whose standards were used to rate
the DVD video disc, then press
ENTER.
ENTER
LOCK
PRESET SECUR I TY
V I EWABLE
CODE
9
EX I T SET UP
PRESS
RETURN
EX I T SET UP
LOCK
SELECT :
USA8
LEVEL8 A D U L T
LEVEL7
LEVEL6
LEVEL5
LEVEL4
LEVEL3
LEVEL2
LEVEL1 G E N E R A L
ENTER
[0] – [9]
ENTER
6
3
1
2
3
4
5
6
7
8
9
+10
0
Press the number buttons to create
a personal 4-digit security code,
then press ENTER.
Press /
to select the parental
lock level, then press ENTER.
ENTER
e.g.
1
2
3
4
ENTER
You cannot play back DVD video discs rated
higher than the level you selected unless you
cancel the parental lock function.
For example, when you select level 7, the
discs rated higher than level 7 are locked out
and cannot be played back.
ENTER
PARENTAL
PARENTAL
LOCK
LOCK
PARENTAL
SELECT :
LOCKED
V I EWABLE
OFF
OFF
ON
USA 8
EX I T SET UP
If you make a mistake before pressing the
ENTER button, press the CLEAR button and
enter your 4-digit security code again.
4
ENTER
LEVEL 7: NC-17
LEVEL 6: R
LEVEL 4: PG 13
The following menu appears.
COUNTRY
ENTER
LOCK
RETURN
EX I T SET UP
LEVEL 3: PG
LEVEL 1: G
The parental lock levels for “CAN” (Canada)
are included for future use. Check the
appropriate parental lock level when you buy
a DVD video disc equipped with the parental
lock function in the future.
SELECT :
USA
USA
LEVEL8
When you
select “CAN,”
“CAN7”
appears
instead.
The parental lock level is equivalent to the
following USA movie ratings.
Press
/ to select “ON,” then
press ENTER.
PARENTAL
LOCK
SELECT :
USA7
LEVEL8 A D U L T
LEVEL7
LEVEL6
LEVEL5
LEVEL4
LEVEL3
LEVEL2
LEVEL1 G E N E R A L
ENTER
Function Setup
e.g. When you select USA
CAN
LEVEL8
ENTER
7
SET UP
Press SET UP.
The SET UP MENU disappears.
Downloaded from www.Manualslib.com manuals search engine
37
Setting the Parental Lock (continued)
RETURN
: If you press the RETURN button while a menu appears on the screen, you will return to the previous menu
screen displayed.
DVD
To change the parental lock level
To cancel the parental lock function
You can change the parental lock level by following the
steps in “Setting the Parental Lock.”
In step 3, press the number buttons to enter your 4-digit
security code, then continue to step 4.
1
Follow steps 1 and 2 in “Setting the Parental Lock.”
2
Press the number buttons to enter your 4-digit
security code, then press the ENTER button.
If you make a mistake, press the CLEAR button and
enter the correct 4-digit security code.
If you make a mistake, press the CLEAR button and enter
the correct 4-digit security code.
3
Press
button.
/
to select “OFF,” then press the ENTER
PARENTAL
LOCK
SELECT :
PARENTAL
LOCK
OFF
ON
OFF
USA 7
RETURN
EX I T SET UP
To change your 4-digit security code
ENTER
You can change your 4-digit security code.
1
Follow steps 1 and 2 in “Setting the Parental Lock.”
2
Press the STOP button four times while the security
code menu appears on the TV screen.
STOP
STOP
STOP
STOP
The 4-digit security code is cleared.
3
Press the number buttons to create a new 4-digit
security code, then press the ENTER button.
4
Complete steps 4 to 7 in “Setting the Parental Lock.”
Note:
DVD video discs may or may not respond to the parental lock
settings. Make sure this function works with your DVD video discs.
38
Downloaded from www.Manualslib.com manuals search engine
The SET UP MENU appears again.
4
Press the SET UP button.
The SET UP MENU disappears, and the parental lock
function is cancelled.
Table of Languages
Table of Languages and Their Abbreviations
Abbreviation
of the
Language
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
Downloaded from www.Manualslib.com manuals search engine
Language
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Abbreviation
of the
Language
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
Language
Lingala
Laotian
Lithuanian
Latvian,Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto,Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Abbreviation
of the
Language
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Language
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
Function Setup
Abbreviation Language
of the
Language
–––
No alternate
language
CHI
Chinese
DUT
Dutch
ENG
English
FRE
French
GER
German
ITA
Italian
JPN
Japanese
KOR
Korean
MAY
Malay
SPA
Spanish
AA
Afar
AB
Abkhazian
AF
Afrikaans
AM
Amharic
AR
Arabic
AS
Assamese
AY
Aymara
AZ
Azerbaijani
BA
Bashkir
BE
Belorussian
BG
Bulgarian
BH
Bihari
BI
Bislama
BN
Bengali,Bangla
BO
Tibetan
BR
Breton
CA
Catalan
CO
Corsican
CS
Czech
CY
Welsh
DA
Danish
DZ
Bhutani
EL
Greek
39
Notes on Discs
This section shows you how to handle, clean, and store discs.
On Handling Discs
Playable Discs
• Do not touch the playback side of the disc.
This DVD player can play back the following discs.
Disc mark
Playback side
DVD
video
discs
• Do not attach paper or tape to discs.
Audio
CDs
On Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a
soft cloth. Always keep the disc clean.
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a
dry cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl
LPs. It may damage the disc.
On Storing Discs
• Do not store discs in a place subject to direct sunlight or
near heat sources.
• Do not store discs in places subject to moisture and dust
such as a bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects
on discs outside of their case may cause warping.
About This Instruction Manual
This instruction manual explains the basic instructions of this
DVD player. Some DVD video discs are produced in a manner
that allows specific or limited operation during playback, As
such, the DVD player may not respond to all operating
commands. Refer to instruction notes of discs.
“ “ may appear on the TV screen during operation. White
“ “ means that the operation is not permitted by the DVD
player; red “ “ by the operation is not permitted by DVD
video disc.
40
Downloaded from www.Manualslib.com manuals search engine
Contents
Disc
size
Audio
+
Video
(moving
pictures)
12 cm
Audio
8 cm
Maximum
playback time
Approx. 4 hours
(single sided disc)
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
Approx. 160 minutes
(double sided disc)
12 cm
74 minutes
8 cm (CD
single)
20 minutes
You cannot play back discs other than those listed above.
This DVD player uses the NTSC color system, and cannot
play back DVD video discs recorded in any other color system
(PAL, SECAM, etc.).
Avoid using heart-shaped or octagonal discs. Playing
irregularly shaped discs may damage the internal mechanism
of the DVD player.
Do not use discs on which adhesive from adhesive tape or a disc
label (if it is a rental disc) remains. Otherwise, you may not be
able to eject the discs or the DVD player may become inoperative.
Notes on Region Numbers
The region number of this DVD player is 1. If region numbers,
which stand for their playable area, are printed on your DVD
, disc playback will
video disc and you do not find 1 or
not be allowed by the player. (In this case, the DVD player
displays the message.)
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on
cable, play in public, and rent copyrighted material without
permission.
DVD video discs are copy protected, and any recordings
made from these discs will be distorted.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
Before Calling Service Personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptoms and Correction
Symptom
Cause
Correction
Page
No power.
The power plug is disconnected.
Connect the power plug into the wall outlet
securely.
12,13
No picture.
• The TV is not set to receive DVD signal
output.
• Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen.
• The video cable is not connected securely.
• Connect the video cable into the jacks
securely.
• The equipment connected with the audio
cable is not set to receive DVD signal
output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The audio cables are not connected
securely.
• Connect the audio cable into the jacks
securely.
No sound.
• The power of the equipment connected with • Turn on the equipment connected with the
audio cable.
the audio cable is turned off.
16
12-15
16
12-15
–
30,31
• The setting of output sound type is not
correct.
• Set the audio setting correctly.
The playback picture has
occasional distortion.
• The disc is dirty.
• Eject the disc and clean it.
40
• It is in fast forward or fast reverse playback.
• Sometimes a small amount of picture distortion
may appear. This is not a malfunction.
–
Brightness is unstable or
noises are produced on
playback pictures.
• The copy protection's effect.
• Connect the DVD player to the TV directly.
12
The DVD player does not start
playback.
• No disc is inserted.
• Insert a disc. (Check that the DVD or audio
CD indicator in the DVD display is lit.)
16
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type
and color system.)
40
• The disc is placed upside down.
• Place the disc with the playback side down.
16
• The disc is not placed within the guide.
• Place the disc on the disc tray correctly
inside the guide.
16
• The disc is dirty.
• Clean the disc.
40
• A menu is on the TV screen.
• Press the SET UP button to turn off the
menu screen.
–
• The parental lock function is set.
• Cancel the parental lock function or change
the parental lock level.
Buttons do not work.
Power supply fluctuations or other
abnormalities such as static electricity may
interrupt correct operation.
Turn the power on or off with the POWER
button. Or disconnect the power plug and
insert it into the wall outlet again.
–
The remote control does not
work properly.
• The remote control is not pointed at the
remote sensor of the DVD player.
• Point the remote control at the remote
sensor of the DVD player.
11
• The remote control is too far from the DVD
player.
• Operate the remote control within about 5 m.
11
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
11
Others
37, 38
Downloaded from www.Manualslib.com manuals search engine
41
Specifications
DVD Player/Outputs/Supplied Accessories
DVD Player
Power supply
AC 120 V, 60 Hz
AC 120 - 240 V, 50/60 Hz
Power consumption
20 W
Weight
4.5 kg
External dimensions
435 × 121 × 306 mm (W/H/D)
Signal system
Standard NTSC
Laser
Semiconductor laser, wavelength 650 nm
Frequency range (digital audio)
DVD linear sound : 48 kHz sampling 4Hz to 22 kHz
96 kHz sampling 4 Hz to 44kHz
Audio CD :
4 Hz to 20 kHz
Signal-to-noise ratio (digital audio)
More than 96 dB (EIAJ)
Audio dynamic range (digital audio)
More than 96 dB (EIAJ)
Harmonic distortion (digital audio)
Less than 0.006 %
Wow and flutter
Below measurable level (less than ±0.001 % (W.PEAK)) (EIAJ)
Operating conditions
Temperature: 5 °C to 35 °C (41 to 95 Degree), Operation status: Horizontal
Outputs
Video output
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
S video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Color difference output
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jacks × 1
(Cr)/(Cb) 0.7 V (p-p), 75 Ω
Audio output (optical audio)
Optical connector × 1
Audio output (digital audio)
0.5 V (p-p), 75 Ω, pin jack × 1
Audio output (analog audio)
2.0 V (rms), 470 Ω, pin jacks (L,R) × 1
Headphone terminal
32 Ω (30mW), Impedance: more than 8 Ω
Supplied Accessories
S video cable ....................................................................... 1
Audio/video cable ................................................................ 1
Remote control (RC-375DV) ................................................ 1
Batteries (AA) ...................................................................... 2
z cable .............................................................................. 1
CV plug (120 - 240 V model only) ........................................ 1
• Designs and specifications are subject to change without notice.
42
Downloaded from www.Manualslib.com manuals search engine
Others
Memo
Downloaded from www.Manualslib.com manuals search engine
43
Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 0720-31-8111 Fax: 0720-33-5222
SN 29342573
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramsey, N.J. 07446, U.S.A.
Tel: 201-825-7950 Fax: 201-825-8150 E-mail: [email protected]
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
Tel: 089 84 93 20 Fax: 089 84 93 226 E-mail: [email protected]
ONKYO EUROPE FRANCE BRANCH
Domaine Technologique de Saclay 4, Rue René Razel, SACLAY-91892
ORSAY CEDEX, FRANCE Tel: (1) 69 33 14 00 Fax: (1) 69 41 35 84
ONKYO CHINA LIMITED
Units 1111-1112 Metroplaza Tower II, 223 Hing Fong Road Kwai Chung,
N.T., HONG KONG Tel: 852 2429 3118 Fax: 852 2428 9039
Downloaded from www.Manualslib.com manuals search engine
Printed in Japan
D9802-1
E
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement