Industrial PS3111-S11 2.5” SATA SSD
Industrial PS3111-S11 2.5” SATA SSD
Phison’s 2.5” SATA Solid State Disk (SSD) delivers all the advantages of flash disk
technology with Serial ATA III interface, including being fully compliant with standard
2.5-inch form factor. The device is designed based on the standard 7-pin interface for
data segment and 15-pin for power segment, as well as operating at a maximum
operating frequency of 300MHz with 30MHz external crystal. Its capacity could provide
a wide range up to 512 GB for MLC application; reach up to 550MB/s read as well as
490MB/s write high performance based on Toshiba’s 15 nm MLC flash.
Product Specification and Features
2GB up to 512GB
SATA Interface
SATA Revision 3.2
SATA 1.5Gbps, 3Gbps, and 6Gbps interface
Flash Interface and Support
15nm MLC/ Pseudo SLC , SLC, 3D TLC
1 pcs to 4 pcs TSOP/BGA flash
Performance (Max)
Read/Write: Up to 550/490 MB/s
IOPS: Up to 84K/85K
Power ConsumptionNote1
Active mode: < 2,630 mW
Idle mode: < 318 mW
TBW (Terabytes Written) Note1
544 TBW for 512GB MLC;
≧ 2,000,000 hours
Advanced Technology
Default: SMART ECCTM(LDPC+RAID ECC), SmartRefreshTM,
End to End Data Path Protection, SmartZIPTM,
Optional: GuaranteeFlushTM
Thermal Sensor
HW Write protect
Quick/ Destroy/ Military Erase
Operating Temperature
Silver grade: 0°C ~ 70°C ; Diamond grade: -40°C ~ 85°C
Storage Temperature: -40°C ~ 85°C
Vibration: 80Hz~2000Hz@20G
Mechanism Shock (operation/ non-operating): 1500G@0.5ms
RoHS and Halogen Free compliant
Physical Dimension
100.00mm (L) x 69.85mm (W) x 7.00mm (H)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF