Optic Fiber Patch Cord
Optic Fiber Patch Cord
NEX1 offers multimode optical fiber patch cords in a wide variety of configurations including
simplex and duplex, in several standard lengths, and special lengths to order. Cords are
available with SC, ST, FDDI, or combinations of connectors.
Features:
■ Variety of combinations for ST-ST, SC-SC, and
ST-SC connectors
■ Near-unlimited bandwidth at high speeds over long distance
■ Total immunity to electrical interference
■ Comes in various lengths specified by the customers
Applications
◆ 1,000 Mbps Gigabit Ethernet (IEEE 802.3Z)
◆ 622 Mbps ATM
◆ 155 Mbps ATM
◆ 100 Mbps TP-PMD
◆ 100 VG-anyLAN
◆ 100 Mbps Fast Ethernet (IEEE 802.3u)
◆ 10 Mbps Ethernet (IEEE 802.3)
◆ 4 Mbps & 16 Mbps Token-Ring (IEEE 802.5)
◆ ISDN
◆
Optic Fiber Patch Cord: Single-Mode
Part Number
NFP9SS-*
Description
◆
Std. Pkg. Qty.
9/125 μm duplex optical
1
Optic Fiber Patch Cord: Multimode
Part Number
NFP5SS-*
fiber cable with two ST
Physical Specifications
◆ Core Diameter: 50/62.5 μm (multimode)
◆ Core Diameter: 9 μm (single-mode)
9/125 μm duplex optical
◆ Minimum Bend Radius: 10 x total diameter
◆ Operating Temperature: -40℃ to +75℃
≦ 1.5 dB at 1,300 nm; ≦ 0.4 dB/km at 1,310 nm;
≦ 0.3 dB at 1,550 nm
◆ Bandwidth: 200 MHz/km at 850 nm; 600 MHz at
◆
9/125 μm duplex optical
NFP6SS-*
1,300 nm
◆ Return Loss: -50 dB single-mode
50/125 μm duplex optical
fiber cable with two ST
connectors on one end and
connectors on one end and
two SC connectors on the
two SC connectors on the
other end.
other end.
Std. Pkg. Qty.
62.5/125 μm duplex
1
1
"*" mark stands for different digit for the lengths
of the cords specified by the customers. 1 stands
for 1 meter; 2 for 2 meters etc.
opticalfiber cable with
two ST connectors on
◆ Insertion Loss: < 0.34 dB typical; < 0.15 dB single
mode; < 0.3 dB multimode
NFP5CS-*
fiber cable with two ST
Description
1
connectors on each end.
1
Optic Fiber Patch Cord: Multimode
Part Number
50/125 μm duplex optical
fiber cable with two SC
Electrical Specifications
◆ Attenuation: ≦ 3.75 dB/km at 850 nm;
NFP5CC-*
connectors on each end.
NFP9CS-*
1
connectors on each end.
1
fiber cable with two SC
◆ Cladding Diameter: 125 μm
Std. Pkg. Qty.
fiber cable with two ST
connectors on each end.
NFP9CC-*
Description
50/125 μm duplex optical
each end.
NFP6CC-*
62.5/125 μm duplex
1
optical fiber cable with
two SC connectors on
◆ Analog voice
each end.
NFP6CS-*
62.5/125 μm duplex
1
optical fiber cable
with two ST connectors
40
on one end and two SC
connectors on the other end.
41
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement