Product Specifications: DM-RMC-100-1

Product Specifications: DM-RMC-100-1
DigitalMedia™ CAT Receiver & Room Controller 100-1
>> DigitalMedia™ CAT receiver and display controller
>> DM® CAT input supports up to 450 ft (137 m) cable length[1]
>> Provides one HDMI® or DVI display output[2]
>> Handles HD video with Deep Color, 3D, and HDCP
>> Handles Dolby® TrueHD, DTS-HD Master Audio™, and
uncompressed 7.1 linear PCM audio
>> Provides 10/100 Ethernet and USB HID mouse/keyboard ports
>> Enables device control via CEC, IR, RS-232, and Ethernet
>> Provides two relay control ports and one contact sensing input
>> Allows quick, easy setup and diagnostics
>> Low-profile surface mount design
>> Powered over the DMNet® connection
The DM-RMC-100-1 provides a convenient one-box interface solution for
a single display device as part of a complete Crestron® DigitalMedia™
system. It functions as a DM® CAT receiver and control interface,
providing a single HDMI® output along with Ethernet, USB HID, and a
variety of control ports. Its compact, low-profile design allows the
DM-RMC-100-1 to be installed discreetly behind a flat panel display or
above a ceiling mounted projector. It connects to the head end or source
location using a single Crestron DM® cable.[1]
As the leader in HDMI and control system technologies, Crestron developed
DigitalMedia (DM) to deliver the first complete HD AV distribution system to
take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI
and other AV sources to be distributed throughout a home, office, school,
or virtually any other facility. DigitalMedia CAT distributes uncompressed
digital video and audio signals up to 450 feet (137 m) using Crestron
DM cable[1].
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-1,
supporting HD 1080p60 video and WUXGA computer signals with HDCP,
Deep Color, 3D, and multi-channel HD lossless audio — all through one
connection. The HDMI output can also handle DVI signals using an
appropriate adapter or interface cable[2].
A single DM cable connects the DM-RMC-100-1 to a DM switcher or
transmitter.[1] Multiple DM-RMC-100-1s may be installed to handle each
display in a multiroom distribution system, all fed from a central DM-MD
series switcher. Or, a single DM-RMC-100-1 can be fed straight from a
DM CAT transmitter to provide a simple solution for extending a computer
or AV signal to a single display.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates
high-speed Ethernet networking for a total signal distribution solution. The
DM-RMC-100-1 includes a 10/100 Ethernet port, providing a convenient
LAN connection for a local network device.
| 800.237.2041
Keyboard/Mouse Extender
The DM-RMC-100-1 also functions as a keyboard/mouse extender,
allowing a USB HID-compliant keyboard and/or mouse to be connected at
the display location and used to control a computer or other component
located at the central equipment rack or some other remote location.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely
the control desired for a seamless user experience. The DM-RMC-100-1
includes built-in RS-232, IR, and Ethernet control ports to allow
programmable control of the display device connected to it. But, it can also
provide an alternative to such conventional control methods by harnessing
the CEC (Consumer Electronics Control) signal embedded in HDMI. Through
its connection to the control system, the DM-RMC-100-1 provides a
gateway for controlling the display device right through the HDMI
connection, potentially eliminating the need for any dedicated control
wires or IR emitters.
Two low-voltage relay ports are also included on the DM-RMC-100-1 for
control of a projection screen or lift. In addition, a single digital input port is
provided to accommodate a power sensor or contact closure for enhanced
automation and monitoring.
Low-Profile Installation
The DM-RMC-100-1 mounts to a wall, ceiling, or other flat surface. At less
than 1-1/2 inches (33 mm) deep, it fits easily behind a flat panel display or
above a ceiling-mounted projector. Connections are positioned on the top
and bottom of the unit. An array of indicators is provided on the front panel
for easy setup and troubleshooting.
Please refer to the DigitalMedia Resources Webpage at for additional design tools and
reference documents.
DM-RMC-100-1 DigitalMedia™ CAT Receiver & Room Controller 100-1
Input Signal Type: DM CAT
Output Signal Type: HDMI
Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio™, Up to 8ch PCM
DigitalMedia: DM CAT, DMNet, HDCP management, EDID format
management, CEC
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP
USB: Supports USB HID class devices
Connectors – Bottom
SENS: (1) 2-pin 3.5mm detachable terminal block;
Digital/contact closure sensing input;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2.2k Ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
HDMI: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output;
Also supports DVI[2]
DM-RMC-100-1 – Top, Front, & Bottom Views
Input Signal Type: DM® CAT (DigitalMedia™ over twisted-pair copper wire)
Output Signal Types: HDMI®, DVI[2]
Formats: HDMI w/Deep Color & 3D, DVI, HDCP content protection support
Input Resolutions, Progressive: [email protected], [email protected]
(480p), [email protected] (576p), [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected] (720p50), [email protected]
(720p60), [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected],
[email protected], [email protected], [email protected], [email protected],
[email protected], [email protected], [email protected] (1080p24),
[email protected] (1080p25), [email protected] (1080p50),
[email protected] (1080p60), [email protected], [email protected],
[email protected], plus any other resolution allowed by HDMI up to
165MHz pixel clock
Input Resolutions, Interlaced: [email protected] (480i), [email protected]
(576i), [email protected] (1080i25), [email protected] (1080i30), plus
any other resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions: Matched to input
| 800.237.2041
USB: (1) USB Type A female; USB host port for connection of a mouse/
keyboard or other USB HID-compliant device
RELAY 1 – 2: (1) 4-pin 3.5mm detachable terminal block;
Comprises (2) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
COM: (1) 5-pin 3.5mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
IR 1 – 2: (1) 4-pin 3.5mm detachable terminal block;
Comprises (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
Connectors – Top
LAN: (1) 8-wire RJ45 female;
10Base-T/100Base-TX Ethernet port
G: (1) 6-32 screw, chassis ground lug
DM IN, D & M: (1) DM CAT input composed of (2) 8-pin RJ45 female,
shielded; Connects to DM CAT output of a DM switcher, transmitter, or
other DM device via DM-CBL cable[1]
DM IN, 24 A B G: (1) 4-pin 3.5mm detachable terminal block, DMNet port;
Connects to DMNet port of a DM switcher, transmitter, or other DM device
via DM-CBL cable[1]
DM-RMC-100-1 DigitalMedia™ CAT Receiver & Room Controller 100-1
DM Cable Length
Maximum length without, between, before, or after repeaters :
13.8 oz (392 g)
200 ft (60 m) for 720p, 1080i, 1080p24
200 ft (60 m) for 1024x768 @75Hz
150 ft (45 m) for 1080p60
150 ft (45 m) for 1280x1024 @75Hz
150 ft (45 m) for 1920x1200 @60Hz
125 ft (38 m) for 1600x1200 @60Hz
50 ft (15 m) for 1080p60 Deep Color
Maximum total length using up to 2 repeaters:
450 ft (137 m) for 720p, 1080i, 1080p24
450 ft (137 m) for 1024x768 @75Hz
450 ft (137 m) for 1080p60
450 ft (137 m) for 1280x1024 @75Hz
450 ft (137 m) for 1920x1200 @60Hz
375 ft (114 m) for 1600x1200 @60Hz
150 ft (45 m) for 1080p60 Deep Color
Controls & Indicators
PWR: (1) green LED, indicates operating power supplied via DMNet
DM LINK: (1) green LED, indicates DM link status
VIDEO: (1) red/green dual-color LED, indicates video signal presence and
lock status
CNTRL: (1) red/green dual-color LED, indicates Ethernet connection and
control system communication status
SETUP: (1) red LED and (1) miniature recessed pushbutton, for
Ethernet setup
RESET: (1) miniature recessed pushbutton, for hardware reset
LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
Power Requirements
DMNet Power Usage: 6 Watts (0.25 Amps @ 24 Volts DC)
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 21 BTU/Hr
Chassis: Metal, black finish
Mounting: Surface mount (mounting bracket included)
Height: 5.66 in (144 mm)
Width: 5.15 in (131 mm)
Depth: 1.29 in (33 mm) with mounting bracket
| 800.237.2041
Available Models
DM-RMC-100-1: DigitalMedia™ CAT Receiver & Room Controller 100-1
Available Accessories
DM-CBL-NP: DigitalMedia™ Cable, non-plenum
DM-CBL-P: DigitalMedia™ Cable, plenum-rated
DM-CONN-20: DigitalMedia™ Cable Connectors, 20-Pack
DM-DR: DigitalMedia™ CAT Repeater
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe
CNXRMCS: TV Current Sensor
CBL Series: Crestron® Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
1. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM CAT Repeaters
(Model DM-DR) may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546
for complete system design guidelines. All cable sold separately.
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal.
CBL-HD-DVI interface cable available separately.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in
typography or photography.
The specific patents that cover Crestron products are listed online at:
Crestron, DigitalMedia, DM, DMNet, and the Crestron logo are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and
Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United
States and/or other countries. DTS and DTS-HD Master Audio are either trademarks or registered
trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo
are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/
or other countries. Other trademarks and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.
DM-RMC-100-1 DigitalMedia™ CAT Receiver & Room Controller 100-1
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
| Fax: 201.767.1903
All brand names, product names and trademarks are the property of their respective owners.
©2012 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 08/02/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF